Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 2019 insertions, 0 deletions

diff --git a/svx/source/svdraw/svdedtv1.cxx b/svx/source/svdraw/svdedtv1.cxx
new file mode 100644
index 000000000..371584bd8
--- /dev/null
+++ b/svx/source/svdraw/svdedtv1.cxx
@@ -0,0 +1,2019 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <editeng/eeitem.hxx>
+#include <math.h>
+#include <svl/itemiter.hxx>
+#include <svl/whiter.hxx>
+#include <tools/bigint.hxx>
+#include <vcl/svapp.hxx>
+#include <vcl/weld.hxx>
+
+#include <getallcharpropids.hxx>
+#include <svx/dialmgr.hxx>
+#include <svx/svditer.hxx>
+#include <svx/strings.hrc>
+
+#include <AffineMatrixItem.hxx>
+#include <svx/e3dsceneupdater.hxx>
+#include <svx/obj3d.hxx>
+#include <svx/rectenum.hxx>
+#include <svx/sdr/contact/viewcontact.hxx>
+#include <svx/sdooitm.hxx>
+#include <svx/sderitm.hxx>
+#include <svx/sdtagitm.hxx>
+#include <svx/svdedtv.hxx>
+#include <svx/svdetc.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/svdpagv.hxx>
+#include <svx/svdtrans.hxx>
+#include <svx/svdundo.hxx>
+#include <svx/svxids.hrc>
+#include <sxallitm.hxx>
+#include <sxmovitm.hxx>
+#include <sxreaitm.hxx>
+#include <sxreoitm.hxx>
+#include <sxroaitm.hxx>
+#include <sxrooitm.hxx>
+#include <sxsalitm.hxx>
+#include <sxsoitm.hxx>
+#include <sxtraitm.hxx>
+#include <svx/xlnedwit.hxx>
+#include <svx/xlnstwit.hxx>
+#include <svx/xlnwtit.hxx>
+#include <svx/xlnclit.hxx>
+#include <svx/xflclit.hxx>
+#include <svx/xlntrit.hxx>
+#include <svx/xfltrit.hxx>
+#include <svx/sdprcitm.hxx>
+#include <LibreOfficeKit/LibreOfficeKitEnums.h>
+#include <rtl/ustring.hxx>
+#include <sfx2/viewsh.hxx>
+#include <comphelper/lok.hxx>
+#include <osl/diagnose.h>
+
+// EditView
+
+
+void SdrEditView::SetMarkedObjRect(const tools::Rectangle& rRect)
+{
+    DBG_ASSERT(!rRect.IsEmpty(),"SetMarkedObjRect() with an empty Rect does not make sense.");
+    if (rRect.IsEmpty()) return;
+    const size_t nCount=GetMarkedObjectCount();
+    if (nCount==0) return;
+    tools::Rectangle aR0(GetMarkedObjRect());
+    DBG_ASSERT(!aR0.IsEmpty(),"SetMarkedObjRect(): GetMarkedObjRect() is empty.");
+    if (aR0.IsEmpty()) return;
+    tools::Long x0=aR0.Left();
+    tools::Long y0=aR0.Top();
+    tools::Long w0=aR0.Right()-x0;
+    tools::Long h0=aR0.Bottom()-y0;
+    tools::Long x1=rRect.Left();
+    tools::Long y1=rRect.Top();
+    tools::Long w1=rRect.Right()-x1;
+    tools::Long h1=rRect.Bottom()-y1;
+
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+    {
+        EndTextEditCurrentView();
+        BegUndo(ImpGetDescriptionString(STR_EditPosSize));
+    }
+
+    for (size_t nm=0; nm<nCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+
+        tools::Rectangle aR1(pO->GetSnapRect());
+        if (!aR1.IsEmpty())
+        {
+            if (aR1==aR0)
+            {
+                aR1=rRect;
+            }
+            else
+            { // transform aR1 to aR0 after rRect
+                aR1.Move(-x0,-y0);
+                BigInt l(aR1.Left());
+                BigInt r(aR1.Right());
+                BigInt t(aR1.Top());
+                BigInt b(aR1.Bottom());
+                if (w0!=0) {
+                    l*=w1; l/=w0;
+                    r*=w1; r/=w0;
+                } else {
+                    l=0; r=w1;
+                }
+                if (h0!=0) {
+                    t*=h1; t/=h0;
+                    b*=h1; b/=h0;
+                } else {
+                    t=0; b=h1;
+                }
+                aR1.SetLeft(tools::Long(l) );
+                aR1.SetRight(tools::Long(r) );
+                aR1.SetTop(tools::Long(t) );
+                aR1.SetBottom(tools::Long(b) );
+                aR1.Move(x1,y1);
+            }
+            pO->SetSnapRect(aR1);
+        } else {
+            OSL_FAIL("SetMarkedObjRect(): pObj->GetSnapRect() returns empty Rect");
+        }
+    }
+    if( bUndo )
+        EndUndo();
+}
+
+std::vector< std::unique_ptr<SdrUndoAction> > SdrEditView::CreateConnectorUndo( const SdrObject& rO )
+{
+    std::vector< std::unique_ptr<SdrUndoAction> > vUndoActions;
+
+    if ( rO.GetBroadcaster() )
+    {
+        const SdrPage* pPage = rO.getSdrPageFromSdrObject();
+        if ( pPage )
+        {
+            SdrObjListIter aIter(pPage, SdrIterMode::DeepWithGroups);
+            while( aIter.IsMore() )
+            {
+                SdrObject* pPartObj = aIter.Next();
+                if ( dynamic_cast<const SdrEdgeObj*>( pPartObj) !=  nullptr )
+                {
+                    if ( ( pPartObj->GetConnectedNode( false ) == &rO ) ||
+                         ( pPartObj->GetConnectedNode( true  ) == &rO ) )
+                    {
+                        vUndoActions.push_back( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject( *pPartObj ) );
+                    }
+                }
+            }
+        }
+    }
+    return vUndoActions;
+}
+
+void SdrEditView::AddUndoActions( std::vector< std::unique_ptr<SdrUndoAction> > aUndoActions )
+{
+    for (auto & rAction : aUndoActions)
+        AddUndo( std::move(rAction) );
+}
+
+void SdrEditView::MoveMarkedObj(const Size& rSiz, bool bCopy)
+{
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+    {
+        EndTextEditCurrentView();
+        OUString aStr(SvxResId(STR_EditMove));
+        if (bCopy)
+            aStr += SvxResId(STR_EditWithCopy);
+        // needs its own UndoGroup because of its parameters
+        BegUndo(aStr,GetDescriptionOfMarkedObjects(),SdrRepeatFunc::Move);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+        {
+            AddUndoActions( CreateConnectorUndo( *pO ) );
+            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoMoveObject(*pO,rSiz));
+        }
+        pO->Move(rSiz);
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+void SdrEditView::ResizeMarkedObj(const Point& rRef, const Fraction& xFact, const Fraction& yFact, bool bCopy)
+{
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+    {
+        EndTextEditCurrentView();
+        OUString aStr {ImpGetDescriptionString(STR_EditResize)};
+        if (bCopy)
+            aStr+=SvxResId(STR_EditWithCopy);
+        BegUndo(aStr);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+        {
+            AddUndoActions( CreateConnectorUndo( *pO ) );
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+        }
+        pO->Resize(rRef,xFact,yFact);
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+void SdrEditView::ResizeMultMarkedObj(const Point& rRef,
+    const Fraction& xFact,
+    const Fraction& yFact,
+    const bool bWdh,
+    const bool bHgt)
+{
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+    {
+        EndTextEditCurrentView();
+        BegUndo(ImpGetDescriptionString(STR_EditResize));
+    }
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+        {
+            AddUndoActions( CreateConnectorUndo( *pO ) );
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+        }
+
+        Fraction aFrac(1,1);
+        if (bWdh && xFact.IsValid() && bHgt && yFact.IsValid())
+            pO->Resize(rRef, xFact, yFact);
+        else if (bWdh && xFact.IsValid())
+            pO->Resize(rRef, xFact, aFrac);
+        else if (bHgt && yFact.IsValid())
+            pO->Resize(rRef, aFrac, yFact);
+    }
+    if( bUndo )
+        EndUndo();
+}
+
+Degree100 SdrEditView::GetMarkedObjRotate() const
+{
+    Degree100 nRetval(0);
+
+    if(GetMarkedObjectCount())
+    {
+        SdrMark* pM = GetSdrMarkByIndex(0);
+        SdrObject* pO = pM->GetMarkedSdrObj();
+
+        nRetval = pO->GetRotateAngle();
+    }
+
+    return nRetval;
+}
+
+void SdrEditView::RotateMarkedObj(const Point& rRef, Degree100 nAngle, bool bCopy)
+{
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+    {
+        EndTextEditCurrentView();
+        OUString aStr {ImpGetDescriptionString(STR_EditRotate)};
+        if (bCopy) aStr+=SvxResId(STR_EditWithCopy);
+        BegUndo(aStr);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    double nSin = sin(toRadians(nAngle));
+    double nCos = cos(toRadians(nAngle));
+    const size_t nMarkCount(GetMarkedObjectCount());
+
+    if(nMarkCount)
+    {
+        std::vector< E3DModifySceneSnapRectUpdater* > aUpdaters;
+
+        for(size_t nm = 0; nm < nMarkCount; ++nm)
+        {
+            SdrMark* pM = GetSdrMarkByIndex(nm);
+            SdrObject* pO = pM->GetMarkedSdrObj();
+
+            if( bUndo )
+            {
+                // extra undo actions for changed connector which now may hold its laid out path (SJ)
+                AddUndoActions( CreateConnectorUndo( *pO ) );
+
+                AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+            }
+
+            // set up a scene updater if object is a 3d object
+            if(dynamic_cast< E3dObject* >(pO))
+            {
+                aUpdaters.push_back(new E3DModifySceneSnapRectUpdater(pO));
+            }
+
+            pO->Rotate(rRef,nAngle,nSin,nCos);
+        }
+
+        // fire scene updaters
+        while(!aUpdaters.empty())
+        {
+            delete aUpdaters.back();
+            aUpdaters.pop_back();
+        }
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+void SdrEditView::MirrorMarkedObj(const Point& rRef1, const Point& rRef2, bool bCopy)
+{
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+    {
+        EndTextEditCurrentView();
+        OUString aStr;
+        Point aDif(rRef2-rRef1);
+        if (aDif.X()==0)
+            aStr = ImpGetDescriptionString(STR_EditMirrorHori);
+        else if (aDif.Y()==0)
+            aStr = ImpGetDescriptionString(STR_EditMirrorVert);
+        else if (std::abs(aDif.X()) == std::abs(aDif.Y()))
+            aStr = ImpGetDescriptionString(STR_EditMirrorDiag);
+        else
+            aStr = ImpGetDescriptionString(STR_EditMirrorFree);
+        if (bCopy) aStr+=SvxResId(STR_EditWithCopy);
+        BegUndo(aStr);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    const size_t nMarkCount(GetMarkedObjectCount());
+
+    if(nMarkCount)
+    {
+        std::vector< E3DModifySceneSnapRectUpdater* > aUpdaters;
+
+        for(size_t nm = 0; nm < nMarkCount; ++nm)
+        {
+            SdrMark* pM = GetSdrMarkByIndex(nm);
+            SdrObject* pO = pM->GetMarkedSdrObj();
+
+            if( bUndo )
+            {
+                // extra undo actions for changed connector which now may hold its laid out path (SJ)
+                AddUndoActions( CreateConnectorUndo( *pO ) );
+
+                AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+            }
+
+            // set up a scene updater if object is a 3d object
+            if(dynamic_cast< E3dObject* >(pO))
+            {
+                aUpdaters.push_back(new E3DModifySceneSnapRectUpdater(pO));
+            }
+
+            pO->Mirror(rRef1,rRef2);
+        }
+
+        // fire scene updaters
+        while(!aUpdaters.empty())
+        {
+            delete aUpdaters.back();
+            aUpdaters.pop_back();
+        }
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+void SdrEditView::MirrorMarkedObjHorizontal()
+{
+    Point aCenter(GetMarkedObjRect().Center());
+    Point aPt2(aCenter);
+    aPt2.AdjustY( 1 );
+    MirrorMarkedObj(aCenter,aPt2);
+}
+
+void SdrEditView::MirrorMarkedObjVertical()
+{
+    Point aCenter(GetMarkedObjRect().Center());
+    Point aPt2(aCenter);
+    aPt2.AdjustX( 1 );
+    MirrorMarkedObj(aCenter,aPt2);
+}
+
+Degree100 SdrEditView::GetMarkedObjShear() const
+{
+    bool b1st=true;
+    bool bOk=true;
+    Degree100 nAngle(0);
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount && bOk; ++nm) {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        Degree100 nAngle2=pO->GetShearAngle();
+        if (b1st) nAngle=nAngle2;
+        else if (nAngle2!=nAngle) bOk=false;
+        b1st=false;
+    }
+    if (nAngle>SDRMAXSHEAR) nAngle=SDRMAXSHEAR;
+    if (nAngle<-SDRMAXSHEAR) nAngle=-SDRMAXSHEAR;
+    if (!bOk) nAngle=0_deg100;
+    return nAngle;
+}
+
+void SdrEditView::ShearMarkedObj(const Point& rRef, Degree100 nAngle, bool bVShear, bool bCopy)
+{
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+    {
+        EndTextEditCurrentView();
+        OUString aStr {ImpGetDescriptionString(STR_EditShear)};
+        if (bCopy)
+            aStr+=SvxResId(STR_EditWithCopy);
+        BegUndo(aStr);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    double nTan = tan(toRadians(nAngle));
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+        {
+            AddUndoActions( CreateConnectorUndo( *pO ) );
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+        }
+        pO->Shear(rRef,nAngle,nTan,bVShear);
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+void SdrEditView::ImpCrookObj(SdrObject* pO, const Point& rRef, const Point& rRad,
+    SdrCrookMode eMode, bool bVertical, bool bNoContortion, bool bRotate, const tools::Rectangle& rMarkRect)
+{
+    SdrPathObj* pPath=dynamic_cast<SdrPathObj*>( pO );
+    bool bDone = false;
+
+    if(pPath!=nullptr && !bNoContortion)
+    {
+        XPolyPolygon aXPP(pPath->GetPathPoly());
+        switch (eMode) {
+            case SdrCrookMode::Rotate : CrookRotatePoly (aXPP,rRef,rRad,bVertical);           break;
+            case SdrCrookMode::Slant  : CrookSlantPoly  (aXPP,rRef,rRad,bVertical);           break;
+            case SdrCrookMode::Stretch: CrookStretchPoly(aXPP,rRef,rRad,bVertical,rMarkRect); break;
+        } // switch
+        pPath->SetPathPoly(aXPP.getB2DPolyPolygon());
+        bDone = true;
+    }
+
+    if(!bDone && !pPath && pO->IsPolyObj() && 0 != pO->GetPointCount())
+    {
+        // for PolyObj's, but NOT for SdrPathObj's, e.g. the measurement object
+        sal_uInt32 nPointCount(pO->GetPointCount());
+        XPolygon aXP(static_cast<sal_uInt16>(nPointCount));
+        sal_uInt32 nPtNum;
+
+        for(nPtNum = 0; nPtNum < nPointCount; nPtNum++)
+        {
+            Point aPt(pO->GetPoint(nPtNum));
+            aXP[static_cast<sal_uInt16>(nPtNum)]=aPt;
+        }
+
+        switch (eMode)
+        {
+            case SdrCrookMode::Rotate : CrookRotatePoly (aXP,rRef,rRad,bVertical);           break;
+            case SdrCrookMode::Slant  : CrookSlantPoly  (aXP,rRef,rRad,bVertical);           break;
+            case SdrCrookMode::Stretch: CrookStretchPoly(aXP,rRef,rRad,bVertical,rMarkRect); break;
+        }
+
+        for(nPtNum = 0; nPtNum < nPointCount; nPtNum++)
+        {
+            // broadcasting could be optimized here, but for the
+            // current two points of the measurement object, it's fine
+            pO->SetPoint(aXP[static_cast<sal_uInt16>(nPtNum)],nPtNum);
+        }
+
+        bDone = true;
+    }
+
+    if(bDone)
+        return;
+
+    // for all others or if bNoContortion
+    Point aCtr0(pO->GetSnapRect().Center());
+    Point aCtr1(aCtr0);
+    bool bRotOk(false);
+    double nSin(0.0), nCos(1.0);
+    double nAngle(0.0);
+
+    if(0 != rRad.X() && 0 != rRad.Y())
+    {
+        bRotOk = bRotate;
+
+        switch (eMode)
+        {
+            case SdrCrookMode::Rotate : nAngle=CrookRotateXPoint (aCtr1,nullptr,nullptr,rRef,rRad,nSin,nCos,bVertical); bRotOk=bRotate; break;
+            case SdrCrookMode::Slant  : nAngle=CrookSlantXPoint  (aCtr1,nullptr,nullptr,rRef,rRad,nSin,nCos,bVertical);           break;
+            case SdrCrookMode::Stretch: nAngle=CrookStretchXPoint(aCtr1,nullptr,nullptr,rRef,rRad,nSin,nCos,bVertical,rMarkRect); break;
+        }
+    }
+
+    aCtr1 -= aCtr0;
+
+    if(bRotOk)
+        pO->Rotate(aCtr0, Degree100(FRound(basegfx::rad2deg<100>(nAngle))), nSin, nCos);
+
+    pO->Move(Size(aCtr1.X(),aCtr1.Y()));
+}
+
+void SdrEditView::CrookMarkedObj(const Point& rRef, const Point& rRad, SdrCrookMode eMode,
+    bool bVertical, bool bNoContortion, bool bCopy)
+{
+    tools::Rectangle aMarkRect(GetMarkedObjRect());
+    const bool bUndo = IsUndoEnabled();
+
+    bool bRotate=bNoContortion && eMode==SdrCrookMode::Rotate && IsRotateAllowed();
+
+    if( bUndo )
+    {
+        EndTextEditCurrentView();
+        OUString aStr {ImpGetDescriptionString(bNoContortion ? STR_EditCrook : STR_EditCrookContortion)};
+        if (bCopy)
+            aStr+=SvxResId(STR_EditWithCopy);
+        BegUndo(aStr);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+
+        const SdrObjList* pOL=pO->GetSubList();
+        if (bNoContortion || pOL==nullptr) {
+            ImpCrookObj(pO,rRef,rRad,eMode,bVertical,bNoContortion,bRotate,aMarkRect);
+        } else {
+            SdrObjListIter aIter(pOL,SdrIterMode::DeepNoGroups);
+            while (aIter.IsMore()) {
+                SdrObject* pO1=aIter.Next();
+                ImpCrookObj(pO1,rRef,rRad,eMode,bVertical,bNoContortion,bRotate,aMarkRect);
+            }
+        }
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+void SdrEditView::ImpDistortObj(SdrObject* pO, const tools::Rectangle& rRef, const XPolygon& rDistortedRect, bool bNoContortion)
+{
+    SdrPathObj* pPath = dynamic_cast<SdrPathObj*>( pO );
+
+    if(!bNoContortion && pPath)
+    {
+        XPolyPolygon aXPP(pPath->GetPathPoly());
+        aXPP.Distort(rRef, rDistortedRect);
+        pPath->SetPathPoly(aXPP.getB2DPolyPolygon());
+    }
+    else if(pO->IsPolyObj())
+    {
+        // e. g. for the measurement object
+        sal_uInt32 nPointCount(pO->GetPointCount());
+        XPolygon aXP(static_cast<sal_uInt16>(nPointCount));
+        sal_uInt32 nPtNum;
+
+        for(nPtNum = 0; nPtNum < nPointCount; nPtNum++)
+        {
+            Point aPt(pO->GetPoint(nPtNum));
+            aXP[static_cast<sal_uInt16>(nPtNum)]=aPt;
+        }
+
+        aXP.Distort(rRef, rDistortedRect);
+
+        for(nPtNum = 0; nPtNum < nPointCount; nPtNum++)
+        {
+            // broadcasting could be optimized here, but for the
+            // current two points of the measurement object it's fine
+            pO->SetPoint(aXP[static_cast<sal_uInt16>(nPtNum)],nPtNum);
+        }
+    }
+}
+
+void SdrEditView::DistortMarkedObj(const tools::Rectangle& rRef, const XPolygon& rDistortedRect, bool bNoContortion, bool bCopy)
+{
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+    {
+        EndTextEditCurrentView();
+        OUString aStr {ImpGetDescriptionString(STR_EditDistort)};
+        if (bCopy)
+            aStr+=SvxResId(STR_EditWithCopy);
+        BegUndo(aStr);
+    }
+
+    if (bCopy)
+        CopyMarkedObj();
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pO=pM->GetMarkedSdrObj();
+        if( bUndo )
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pO));
+
+        tools::Rectangle aRefRect(rRef);
+        const SdrObjList* pOL=pO->GetSubList();
+        if (bNoContortion || pOL==nullptr) {
+            ImpDistortObj(pO,aRefRect,rDistortedRect,bNoContortion);
+        } else {
+            SdrObjListIter aIter(pOL,SdrIterMode::DeepNoGroups);
+            while (aIter.IsMore()) {
+                SdrObject* pO1=aIter.Next();
+                ImpDistortObj(pO1,aRefRect,rDistortedRect,bNoContortion);
+            }
+        }
+    }
+    if( bUndo )
+        EndUndo();
+}
+
+
+void SdrEditView::SetNotPersistAttrToMarked(const SfxItemSet& rAttr)
+{
+    // bReplaceAll has no effect here
+    tools::Rectangle aAllSnapRect(GetMarkedObjRect());
+    if (const SdrTransformRef1XItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_TRANSFORMREF1X))
+    {
+        tools::Long n = pPoolItem->GetValue();
+        SetRef1(Point(n,GetRef1().Y()));
+    }
+    if (const SdrTransformRef1YItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_TRANSFORMREF1Y))
+    {
+        tools::Long n = pPoolItem->GetValue();
+        SetRef1(Point(GetRef1().X(),n));
+    }
+    if (const SdrTransformRef2XItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_TRANSFORMREF2X))
+    {
+        tools::Long n = pPoolItem->GetValue();
+        SetRef2(Point(n,GetRef2().Y()));
+    }
+    if (const SdrTransformRef2YItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_TRANSFORMREF2Y))
+    {
+        tools::Long n = pPoolItem->GetValue();
+        SetRef2(Point(GetRef2().X(),n));
+    }
+    tools::Long nAllPosX=0; bool bAllPosX=false;
+    tools::Long nAllPosY=0; bool bAllPosY=false;
+    tools::Long nAllWdt=0;  bool bAllWdt=false;
+    tools::Long nAllHgt=0;  bool bAllHgt=false;
+    bool bDoIt=false;
+    if (const SdrAllPositionXItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_ALLPOSITIONX))
+    {
+        nAllPosX = pPoolItem->GetValue();
+        bAllPosX=true; bDoIt=true;
+    }
+    if (const SdrAllPositionYItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_ALLPOSITIONY))
+    {
+        nAllPosY = pPoolItem->GetValue();
+        bAllPosY=true; bDoIt=true;
+    }
+    if (const SdrAllSizeWidthItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_ALLSIZEWIDTH))
+    {
+        nAllWdt = pPoolItem->GetValue();
+        bAllWdt=true; bDoIt=true;
+    }
+    if (const SdrAllSizeHeightItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_ALLSIZEHEIGHT))
+    {
+        nAllHgt = pPoolItem->GetValue();
+        bAllHgt=true; bDoIt=true;
+    }
+    if (bDoIt) {
+        tools::Rectangle aRect(aAllSnapRect); // TODO: change this for PolyPt's and GluePt's!!!
+        if (bAllPosX) aRect.Move(nAllPosX-aRect.Left(),0);
+        if (bAllPosY) aRect.Move(0,nAllPosY-aRect.Top());
+        if (bAllWdt)  aRect.SetRight(aAllSnapRect.Left()+nAllWdt );
+        if (bAllHgt)  aRect.SetBottom(aAllSnapRect.Top()+nAllHgt );
+        SetMarkedObjRect(aRect);
+    }
+    if (const SdrResizeXAllItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_RESIZEXALL))
+    {
+        Fraction aXFact = pPoolItem->GetValue();
+        ResizeMarkedObj(aAllSnapRect.TopLeft(),aXFact,Fraction(1,1));
+    }
+    if (const SdrResizeYAllItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_RESIZEYALL))
+    {
+        Fraction aYFact = pPoolItem->GetValue();
+        ResizeMarkedObj(aAllSnapRect.TopLeft(),Fraction(1,1),aYFact);
+    }
+    if (const SdrRotateAllItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_ROTATEALL))
+    {
+        Degree100 nAngle = pPoolItem->GetValue();
+        RotateMarkedObj(aAllSnapRect.Center(),nAngle);
+    }
+    if (const SdrHorzShearAllItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_HORZSHEARALL))
+    {
+        Degree100 nAngle = pPoolItem->GetValue();
+        ShearMarkedObj(aAllSnapRect.Center(),nAngle);
+    }
+    if (const SdrVertShearAllItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_VERTSHEARALL))
+    {
+        Degree100 nAngle = pPoolItem->GetValue();
+        ShearMarkedObj(aAllSnapRect.Center(),nAngle,true);
+    }
+
+    const bool bUndo = IsUndoEnabled();
+
+    // TODO: check if WhichRange is necessary.
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        const SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        if( bUndo )
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+
+        pObj->ApplyNotPersistAttr(rAttr);
+    }
+}
+
+void SdrEditView::MergeNotPersistAttrFromMarked(SfxItemSet& rAttr) const
+{
+    // TODO: Take into account the origin and PvPos.
+    tools::Rectangle aAllSnapRect(GetMarkedObjRect()); // TODO: change this for PolyPt's and GluePt's!!!
+    tools::Long nAllSnapPosX=aAllSnapRect.Left();
+    tools::Long nAllSnapPosY=aAllSnapRect.Top();
+    tools::Long nAllSnapWdt=aAllSnapRect.GetWidth()-1;
+    tools::Long nAllSnapHgt=aAllSnapRect.GetHeight()-1;
+    // TODO: could go into CheckPossibilities
+    bool bMovProtect = false, bMovProtectDC = false;
+    bool bSizProtect = false, bSizProtectDC = false;
+    bool bPrintable = true, bPrintableDC = false;
+    bool bVisible = true, bVisibleDC = false;
+    SdrLayerID nLayerId(0);
+    bool bLayerDC=false;
+    tools::Long nSnapPosX=0;      bool bSnapPosXDC=false;
+    tools::Long nSnapPosY=0;      bool bSnapPosYDC=false;
+    tools::Long nSnapWdt=0;       bool bSnapWdtDC=false;
+    tools::Long nSnapHgt=0;       bool bSnapHgtDC=false;
+    tools::Long nLogicWdt=0;      bool bLogicWdtDC=false,bLogicWdtDiff=false;
+    tools::Long nLogicHgt=0;      bool bLogicHgtDC=false,bLogicHgtDiff=false;
+    Degree100 nRotAngle(0);      bool bRotAngleDC=false;
+    Degree100 nShrAngle(0);      bool bShrAngleDC=false;
+    tools::Rectangle aSnapRect;
+    tools::Rectangle aLogicRect;
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm) {
+        const SdrMark* pM=GetSdrMarkByIndex(nm);
+        const SdrObject* pObj=pM->GetMarkedSdrObj();
+        if (nm==0) {
+            nLayerId=pObj->GetLayer();
+            bMovProtect=pObj->IsMoveProtect();
+            bSizProtect=pObj->IsResizeProtect();
+            bPrintable =pObj->IsPrintable();
+            bVisible = pObj->IsVisible();
+            tools::Rectangle aSnapRect2(pObj->GetSnapRect());
+            tools::Rectangle aLogicRect2(pObj->GetLogicRect());
+            nSnapPosX=aSnapRect2.Left();
+            nSnapPosY=aSnapRect2.Top();
+            nSnapWdt=aSnapRect2.GetWidth()-1;
+            nSnapHgt=aSnapRect2.GetHeight()-1;
+            nLogicWdt=aLogicRect2.GetWidth()-1;
+            nLogicHgt=aLogicRect2.GetHeight()-1;
+            bLogicWdtDiff=nLogicWdt!=nSnapWdt;
+            bLogicHgtDiff=nLogicHgt!=nSnapHgt;
+            nRotAngle=pObj->GetRotateAngle();
+            nShrAngle=pObj->GetShearAngle();
+        } else {
+            if (!bLayerDC      && nLayerId   !=pObj->GetLayer())        bLayerDC = true;
+            if (!bMovProtectDC && bMovProtect!=pObj->IsMoveProtect())   bMovProtectDC = true;
+            if (!bSizProtectDC && bSizProtect!=pObj->IsResizeProtect()) bSizProtectDC = true;
+            if (!bPrintableDC  && bPrintable !=pObj->IsPrintable())     bPrintableDC = true;
+            if (!bVisibleDC    && bVisible !=pObj->IsVisible())         bVisibleDC=true;
+            if (!bRotAngleDC   && nRotAngle  !=pObj->GetRotateAngle())  bRotAngleDC=true;
+            if (!bShrAngleDC   && nShrAngle  !=pObj->GetShearAngle())   bShrAngleDC=true;
+            if (!bSnapWdtDC || !bSnapHgtDC || !bSnapPosXDC || !bSnapPosYDC || !bLogicWdtDiff || !bLogicHgtDiff) {
+                aSnapRect=pObj->GetSnapRect();
+                if (nSnapPosX!=aSnapRect.Left()) bSnapPosXDC=true;
+                if (nSnapPosY!=aSnapRect.Top()) bSnapPosYDC=true;
+                if (nSnapWdt!=aSnapRect.GetWidth()-1) bSnapWdtDC=true;
+                if (nSnapHgt!=aSnapRect.GetHeight()-1) bSnapHgtDC=true;
+            }
+            if (!bLogicWdtDC || !bLogicHgtDC || !bLogicWdtDiff || !bLogicHgtDiff) {
+                aLogicRect=pObj->GetLogicRect();
+                if (nLogicWdt!=aLogicRect.GetWidth()-1) bLogicWdtDC=true;
+                if (nLogicHgt!=aLogicRect.GetHeight()-1) bLogicHgtDC=true;
+                if (!bLogicWdtDiff && aSnapRect.GetWidth()!=aLogicRect.GetWidth()) bLogicWdtDiff=true;
+                if (!bLogicHgtDiff && aSnapRect.GetHeight()!=aLogicRect.GetHeight()) bLogicHgtDiff=true;
+            }
+        }
+    }
+
+    if (bSnapPosXDC || nAllSnapPosX!=nSnapPosX) rAttr.Put(SdrAllPositionXItem(nAllSnapPosX));
+    if (bSnapPosYDC || nAllSnapPosY!=nSnapPosY) rAttr.Put(SdrAllPositionYItem(nAllSnapPosY));
+    if (bSnapWdtDC  || nAllSnapWdt !=nSnapWdt ) rAttr.Put(SdrAllSizeWidthItem(nAllSnapWdt));
+    if (bSnapHgtDC  || nAllSnapHgt !=nSnapHgt ) rAttr.Put(SdrAllSizeHeightItem(nAllSnapHgt));
+
+    // items for pure transformations
+    rAttr.Put(SdrMoveXItem());
+    rAttr.Put(SdrMoveYItem());
+    rAttr.Put(SdrResizeXOneItem());
+    rAttr.Put(SdrResizeYOneItem());
+    rAttr.Put(SdrRotateOneItem());
+    rAttr.Put(SdrHorzShearOneItem());
+    rAttr.Put(SdrVertShearOneItem());
+
+    if (nMarkCount>1) {
+        rAttr.Put(SdrResizeXAllItem());
+        rAttr.Put(SdrResizeYAllItem());
+        rAttr.Put(SdrRotateAllItem());
+        rAttr.Put(SdrHorzShearAllItem());
+        rAttr.Put(SdrVertShearAllItem());
+    }
+
+    if(meDragMode == SdrDragMode::Rotate || meDragMode == SdrDragMode::Mirror)
+    {
+        rAttr.Put(SdrTransformRef1XItem(GetRef1().X()));
+        rAttr.Put(SdrTransformRef1YItem(GetRef1().Y()));
+    }
+
+    if(meDragMode == SdrDragMode::Mirror)
+    {
+        rAttr.Put(SdrTransformRef2XItem(GetRef2().X()));
+        rAttr.Put(SdrTransformRef2YItem(GetRef2().Y()));
+    }
+}
+
+SfxItemSet SdrEditView::GetAttrFromMarked(bool bOnlyHardAttr) const
+{
+    SfxItemSet aSet(mpModel->GetItemPool());
+    MergeAttrFromMarked(aSet,bOnlyHardAttr);
+    //the EE_FEATURE items should not be set with SetAttrToMarked (see error message there)
+    //so we do not set them here
+    // #i32448#
+    // Do not disable, but clear the items.
+    aSet.ClearItem(EE_FEATURE_TAB);
+    aSet.ClearItem(EE_FEATURE_LINEBR);
+    aSet.ClearItem(EE_FEATURE_NOTCONV);
+    aSet.ClearItem(EE_FEATURE_FIELD);
+
+    return aSet;
+}
+
+void SdrEditView::MergeAttrFromMarked(SfxItemSet& rAttr, bool bOnlyHardAttr) const
+{
+    const size_t nMarkCount(GetMarkedObjectCount());
+
+    for(size_t a = 0; a < nMarkCount; ++a)
+    {
+        // #80277# merging was done wrong in the prev version
+        SdrObject *pObj = GetMarkedObjectByIndex(a);
+        if (!pObj)
+        {
+            continue;
+        }
+
+        const SfxItemSet& rSet = pObj->GetMergedItemSet();
+        SfxWhichIter aIter(rSet);
+        sal_uInt16 nWhich(aIter.FirstWhich());
+
+        while(nWhich)
+        {
+            if(!bOnlyHardAttr)
+            {
+                if(SfxItemState::DONTCARE == aIter.GetItemState(false))
+                    rAttr.InvalidateItem(nWhich);
+                else
+                    rAttr.MergeValue(rSet.Get(nWhich), true);
+            }
+            else if(SfxItemState::SET == aIter.GetItemState(false))
+            {
+                const SfxPoolItem& rItem = rSet.Get(nWhich);
+                rAttr.MergeValue(rItem, true);
+            }
+
+            if (comphelper::LibreOfficeKit::isActive())
+            {
+                OUString sPayload;
+                switch(nWhich)
+                {
+                    case XATTR_LINECOLOR:
+                    {
+                        const SfxPoolItem* pItem = rSet.GetItem(XATTR_LINECOLOR);
+                        if (pItem)
+                        {
+                            Color aColor = static_cast<const XLineColorItem*>(pItem)->GetColorValue();
+                            sPayload = OUString::number(static_cast<sal_uInt32>(aColor));
+
+                            sPayload = ".uno:XLineColor=" + sPayload;
+                        }
+                        break;
+                    }
+
+                    case XATTR_FILLCOLOR:
+                    {
+                        const SfxPoolItem* pItem = rSet.GetItem(XATTR_FILLCOLOR);
+                        if (pItem)
+                        {
+                            Color aColor = static_cast<const XFillColorItem*>(pItem)->GetColorValue();
+                            sPayload = OUString::number(static_cast<sal_uInt32>(aColor));
+
+                            sPayload = ".uno:FillColor=" + sPayload;
+                        }
+                        break;
+                    }
+
+                    case XATTR_FILLTRANSPARENCE:
+                    {
+                        const SfxPoolItem* pItem = rSet.GetItem(XATTR_FILLTRANSPARENCE);
+                        if (pItem)
+                        {
+                            sal_uInt16 nTransparency = static_cast<const SfxUInt16Item*>(pItem)->GetValue();
+                            sPayload = OUString::number(nTransparency);
+
+                            sPayload = ".uno:FillTransparence=" + sPayload;
+                        }
+                        break;
+                    }
+
+                    case XATTR_LINETRANSPARENCE:
+                    {
+                        const SfxPoolItem* pItem = rSet.GetItem(XATTR_LINETRANSPARENCE);
+                        if (pItem)
+                        {
+                            sal_uInt16 nTransparency = static_cast<const SfxUInt16Item*>(pItem)->GetValue();
+                            sPayload = OUString::number(nTransparency);
+
+                            sPayload = ".uno:LineTransparence=" + sPayload;
+                        }
+                        break;
+                    }
+
+                    case XATTR_LINEWIDTH:
+                    {
+                        const SfxPoolItem* pItem = rSet.GetItem(XATTR_LINEWIDTH);
+                        if (pItem)
+                        {
+                            sal_uInt32 nWidth = static_cast<const XLineWidthItem*>(pItem)->GetValue();
+                            sPayload = OUString::number(nWidth);
+
+                            sPayload = ".uno:LineWidth=" + sPayload;
+                        }
+                        break;
+                    }
+
+                    case SDRATTR_SHADOWTRANSPARENCE:
+                    {
+                        const SfxPoolItem* pItem = rSet.GetItem(SDRATTR_SHADOWTRANSPARENCE);
+                        if (pItem)
+                        {
+                            sal_uInt16 nWidth = static_cast<const SfxUInt16Item*>(pItem)->GetValue();
+                            sPayload = OUString::number(nWidth);
+
+                            sPayload = ".uno:FillShadowTransparency=" + sPayload;
+                        }
+                        break;
+                    }
+                }
+
+                if (!sPayload.isEmpty())
+                    GetSfxViewShell()->libreOfficeKitViewCallback(LOK_CALLBACK_STATE_CHANGED,
+                        OUStringToOString(sPayload, RTL_TEXTENCODING_ASCII_US).getStr());
+            }
+
+            nWhich = aIter.NextWhich();
+        }
+    }
+}
+
+std::vector<sal_uInt16> GetAllCharPropIds(const SfxItemSet& rSet)
+{
+    std::vector<sal_uInt16> aCharWhichIds;
+    {
+        SfxItemIter aIter(rSet);
+        for (const SfxPoolItem* pItem = aIter.GetCurItem(); pItem; pItem = aIter.NextItem())
+        {
+            if (!IsInvalidItem(pItem))
+            {
+                sal_uInt16 nWhich = pItem->Which();
+                if (nWhich>=EE_CHAR_START && nWhich<=EE_CHAR_END)
+                    aCharWhichIds.push_back( nWhich );
+            }
+        }
+    }
+    return aCharWhichIds;
+}
+
+std::vector<sal_uInt16> GetAllCharPropIds(o3tl::span< const SfxPoolItem* const > aChangedItems)
+{
+    std::vector<sal_uInt16> aCharWhichIds;
+    for (const SfxPoolItem* pItem : aChangedItems)
+    {
+        sal_uInt16 nWhich = pItem->Which();
+        if (nWhich>=EE_CHAR_START && nWhich<=EE_CHAR_END)
+            aCharWhichIds.push_back( nWhich );
+    }
+    return aCharWhichIds;
+}
+
+void SdrEditView::SetAttrToMarked(const SfxItemSet& rAttr, bool bReplaceAll)
+{
+    if (!AreObjectsMarked())
+        return;
+
+#ifdef DBG_UTIL
+    {
+        bool bHasEEFeatureItems=false;
+        SfxItemIter aIter(rAttr);
+        for (const SfxPoolItem* pItem = aIter.GetCurItem(); !bHasEEFeatureItems && pItem;
+             pItem = aIter.NextItem())
+        {
+            if (!IsInvalidItem(pItem)) {
+                sal_uInt16 nW=pItem->Which();
+                if (nW>=EE_FEATURE_START && nW<=EE_FEATURE_END) bHasEEFeatureItems=true;
+            }
+        }
+        if(bHasEEFeatureItems)
+        {
+            std::unique_ptr<weld::MessageDialog> xInfoBox(Application::CreateMessageDialog(nullptr,
+                                                          VclMessageType::Info, VclButtonsType::Ok,
+                                                          "SdrEditView::SetAttrToMarked(): Setting EE_FEATURE items at the SdrView does not make sense! It only leads to overhead and unreadable documents."));
+            xInfoBox->run();
+        }
+    }
+#endif
+
+    // #103836# if the user sets character attributes to the complete shape,
+    //          we want to remove all hard set character attributes with same
+    //          which ids from the text. We do that later but here we remember
+    //          all character attribute which id's that are set.
+    std::vector<sal_uInt16> aCharWhichIds(GetAllCharPropIds(rAttr));
+
+    // To make Undo reconstruct text attributes correctly after Format.Standard
+    bool bHasEEItems=SearchOutlinerItems(rAttr,bReplaceAll);
+
+    // save additional geometry information when paragraph or character attributes
+    // are changed and the geometrical shape of the text object might be changed
+    bool bPossibleGeomChange(false);
+    SfxWhichIter aIter(rAttr);
+    sal_uInt16 nWhich = aIter.FirstWhich();
+    while(!bPossibleGeomChange && nWhich)
+    {
+        SfxItemState eState = aIter.GetItemState();
+        if(eState == SfxItemState::SET)
+        {
+            if((nWhich >= SDRATTR_TEXT_MINFRAMEHEIGHT && nWhich <= SDRATTR_TEXT_CONTOURFRAME)
+                || nWhich == SDRATTR_3DOBJ_PERCENT_DIAGONAL
+                || nWhich == SDRATTR_3DOBJ_BACKSCALE
+                || nWhich == SDRATTR_3DOBJ_DEPTH
+                || nWhich == SDRATTR_3DOBJ_END_ANGLE
+                || nWhich == SDRATTR_3DSCENE_DISTANCE)
+            {
+                bPossibleGeomChange = true;
+            }
+        }
+        nWhich = aIter.NextWhich();
+    }
+
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+    {
+        EndTextEditCurrentView();
+        BegUndo(ImpGetDescriptionString(STR_EditSetAttributes));
+    }
+
+    const size_t nMarkCount(GetMarkedObjectCount());
+    std::vector< E3DModifySceneSnapRectUpdater* > aUpdaters;
+
+    // create ItemSet without SfxItemState::DONTCARE. Put()
+    // uses its second parameter (bInvalidAsDefault) to
+    // remove all such items to set them to default.
+    SfxItemSet aAttr(*rAttr.GetPool(), rAttr.GetRanges());
+    aAttr.Put(rAttr);
+
+    // #i38135#
+    bool bResetAnimationTimer(false);
+
+    const bool bLineStartWidthExplicitChange(SfxItemState::SET
+                                             == aAttr.GetItemState(XATTR_LINESTARTWIDTH));
+    const bool bLineEndWidthExplicitChange(SfxItemState::SET
+                                           == aAttr.GetItemState(XATTR_LINEENDWIDTH));
+    // check if LineWidth is part of the change
+    const bool bAdaptStartEndWidths(!(bLineStartWidthExplicitChange && bLineEndWidthExplicitChange)
+                                     && SfxItemState::SET == aAttr.GetItemState(XATTR_LINEWIDTH));
+    sal_Int32 nNewLineWidth(0);
+
+    if(bAdaptStartEndWidths)
+    {
+        nNewLineWidth = aAttr.Get(XATTR_LINEWIDTH).GetValue();
+    }
+
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj = pM->GetMarkedSdrObj();
+
+        if( bUndo )
+        {
+            SdrEdgeObj* pEdgeObj = dynamic_cast< SdrEdgeObj* >( pObj );
+            if ( pEdgeObj )
+                bPossibleGeomChange = true;
+            else
+                AddUndoActions( CreateConnectorUndo( *pObj ) );
+        }
+
+        // new geometry undo
+        if(bPossibleGeomChange && bUndo)
+        {
+            // save position and size of object, too
+            AddUndo( GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+        }
+
+        if( bUndo )
+        {
+            // #i8508#
+            // If this is a text object also rescue the OutlinerParaObject since
+            // applying attributes to the object may change text layout when
+            // multiple portions exist with multiple formats. If an OutlinerParaObject
+            // really exists and needs to be rescued is evaluated in the undo
+            // implementation itself.
+            const bool bRescueText = dynamic_cast< SdrTextObj* >(pObj) != nullptr;
+
+            // add attribute undo
+            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*pObj,false,bHasEEItems || bPossibleGeomChange || bRescueText));
+        }
+
+        // set up a scene updater if object is a 3d object
+        if(dynamic_cast< E3dObject* >(pObj))
+        {
+            aUpdaters.push_back(new E3DModifySceneSnapRectUpdater(pObj));
+        }
+
+        sal_Int32 nOldLineWidth(0);
+        if (bAdaptStartEndWidths)
+        {
+            nOldLineWidth = pObj->GetMergedItem(XATTR_LINEWIDTH).GetValue();
+        }
+
+        // set attributes at object
+        pObj->SetMergedItemSetAndBroadcast(aAttr, bReplaceAll);
+
+        if(bAdaptStartEndWidths)
+        {
+            const SfxItemSet& rSet = pObj->GetMergedItemSet();
+
+            if(nOldLineWidth != nNewLineWidth)
+            {
+                if(SfxItemState::DONTCARE != rSet.GetItemState(XATTR_LINESTARTWIDTH))
+                {
+                    const sal_Int32 nValAct(rSet.Get(XATTR_LINESTARTWIDTH).GetValue());
+                    const sal_Int32 nValNewStart(std::max(sal_Int32(0), nValAct + (((nNewLineWidth - nOldLineWidth) * 15) / 10)));
+
+                    pObj->SetMergedItem(XLineStartWidthItem(nValNewStart));
+                }
+
+                if(SfxItemState::DONTCARE != rSet.GetItemState(XATTR_LINEENDWIDTH))
+                {
+                    const sal_Int32 nValAct(rSet.Get(XATTR_LINEENDWIDTH).GetValue());
+                    const sal_Int32 nValNewEnd(std::max(sal_Int32(0), nValAct + (((nNewLineWidth - nOldLineWidth) * 15) / 10)));
+
+                    pObj->SetMergedItem(XLineEndWidthItem(nValNewEnd));
+                }
+            }
+        }
+
+        if(auto pTextObj = dynamic_cast<SdrTextObj*>( pObj))
+        {
+            if(!aCharWhichIds.empty())
+            {
+                tools::Rectangle aOldBoundRect = pTextObj->GetLastBoundRect();
+
+                // #110094#-14 pTextObj->SendRepaintBroadcast(pTextObj->GetBoundRect());
+                pTextObj->RemoveOutlinerCharacterAttribs( aCharWhichIds );
+
+                // object has changed, should be called from
+                // RemoveOutlinerCharacterAttribs. This will change when the text
+                // object implementation changes.
+                pTextObj->SetChanged();
+
+                pTextObj->BroadcastObjectChange();
+                pTextObj->SendUserCall(SdrUserCallType::ChangeAttr, aOldBoundRect);
+            }
+        }
+
+        // #i38495#
+        if(!bResetAnimationTimer)
+        {
+            if(pObj->GetViewContact().isAnimatedInAnyViewObjectContact())
+            {
+                bResetAnimationTimer = true;
+            }
+        }
+    }
+
+    // fire scene updaters
+    while(!aUpdaters.empty())
+    {
+        delete aUpdaters.back();
+        aUpdaters.pop_back();
+    }
+
+    // #i38135#
+    if(bResetAnimationTimer)
+    {
+        SetAnimationTimer(0);
+    }
+
+    // better check before what to do:
+    // pObj->SetAttr() or SetNotPersistAttr()
+    // TODO: missing implementation!
+    SetNotPersistAttrToMarked(rAttr);
+
+    if( bUndo )
+        EndUndo();
+}
+
+SfxStyleSheet* SdrEditView::GetStyleSheetFromMarked() const
+{
+    SfxStyleSheet* pRet=nullptr;
+    bool b1st=true;
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm) {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SfxStyleSheet* pSS=pM->GetMarkedSdrObj()->GetStyleSheet();
+        if (b1st) pRet=pSS;
+        else if (pRet!=pSS) return nullptr; // different stylesheets
+        b1st=false;
+    }
+    return pRet;
+}
+
+void SdrEditView::SetStyleSheetToMarked(SfxStyleSheet* pStyleSheet, bool bDontRemoveHardAttr)
+{
+    if (!AreObjectsMarked())
+        return;
+
+    const bool bUndo = IsUndoEnabled();
+
+    if( bUndo )
+    {
+        EndTextEditCurrentView();
+        OUString aStr;
+        if (pStyleSheet!=nullptr)
+            aStr = ImpGetDescriptionString(STR_EditSetStylesheet);
+        else
+            aStr = ImpGetDescriptionString(STR_EditDelStylesheet);
+        BegUndo(aStr);
+    }
+
+    const size_t nMarkCount=GetMarkedObjectCount();
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        if( bUndo )
+        {
+            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pM->GetMarkedSdrObj()));
+            AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoAttrObject(*pM->GetMarkedSdrObj(),true,true));
+        }
+        pM->GetMarkedSdrObj()->SetStyleSheet(pStyleSheet,bDontRemoveHardAttr);
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+
+void SdrEditView::GetAttributes(SfxItemSet& rTargetSet, bool bOnlyHardAttr) const
+{
+    if(GetMarkedObjectCount())
+    {
+        rTargetSet.Put(GetAttrFromMarked(bOnlyHardAttr), false);
+    }
+    else
+    {
+        SdrMarkView::GetAttributes(rTargetSet, bOnlyHardAttr);
+    }
+}
+
+void SdrEditView::SetAttributes(const SfxItemSet& rSet, bool bReplaceAll)
+{
+    if (GetMarkedObjectCount()!=0) {
+        SetAttrToMarked(rSet,bReplaceAll);
+    } else {
+        SdrMarkView::SetAttributes(rSet,bReplaceAll);
+    }
+}
+
+SfxStyleSheet* SdrEditView::GetStyleSheet() const
+{
+    if (GetMarkedObjectCount()!=0) {
+        return GetStyleSheetFromMarked();
+    } else {
+        return SdrMarkView::GetStyleSheet();
+    }
+}
+
+void SdrEditView::SetStyleSheet(SfxStyleSheet* pStyleSheet, bool bDontRemoveHardAttr)
+{
+    if (GetMarkedObjectCount()!=0) {
+        SetStyleSheetToMarked(pStyleSheet,bDontRemoveHardAttr);
+    } else {
+        SdrMarkView::SetStyleSheet(pStyleSheet,bDontRemoveHardAttr);
+    }
+}
+
+
+SfxItemSet SdrEditView::GetGeoAttrFromMarked() const
+{
+    SfxItemSet aRetSet(
+        mpModel->GetItemPool(),
+        svl::Items< // SID_ATTR_TRANSFORM_... from s:svxids.hrc
+            SDRATTR_CORNER_RADIUS, SDRATTR_CORNER_RADIUS,
+            SID_ATTR_TRANSFORM_POS_X, SID_ATTR_TRANSFORM_ANGLE,
+            SID_ATTR_TRANSFORM_PROTECT_POS, SID_ATTR_TRANSFORM_AUTOHEIGHT>);
+
+    if (AreObjectsMarked())
+    {
+        SfxItemSet aMarkAttr(GetAttrFromMarked(false)); // because of AutoGrowHeight and corner radius
+        tools::Rectangle aRect(GetMarkedObjRect());
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->LogicToPagePos(aRect);
+        }
+
+        // position
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_POS_X,aRect.Left()));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_POS_Y,aRect.Top()));
+
+        // size
+        tools::Long nResizeRefX=aRect.Left();
+        tools::Long nResizeRefY=aRect.Top();
+        if (meDragMode==SdrDragMode::Rotate) { // use rotation axis as a reference for resizing, too
+            nResizeRefX=maRef1.X();
+            nResizeRefY=maRef1.Y();
+        }
+        aRetSet.Put(SfxUInt32Item(SID_ATTR_TRANSFORM_WIDTH,aRect.Right()-aRect.Left()));
+        aRetSet.Put(SfxUInt32Item(SID_ATTR_TRANSFORM_HEIGHT,aRect.Bottom()-aRect.Top()));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_RESIZE_REF_X,nResizeRefX));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_RESIZE_REF_Y,nResizeRefY));
+
+        Point aRotateAxe(maRef1);
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->LogicToPagePos(aRotateAxe);
+        }
+
+        // rotation
+        tools::Long nRotateRefX=aRect.Center().X();
+        tools::Long nRotateRefY=aRect.Center().Y();
+        if (meDragMode==SdrDragMode::Rotate) {
+            nRotateRefX=aRotateAxe.X();
+            nRotateRefY=aRotateAxe.Y();
+        }
+        aRetSet.Put(SdrAngleItem(SID_ATTR_TRANSFORM_ANGLE,GetMarkedObjRotate()));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_ROT_X,nRotateRefX));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_ROT_Y,nRotateRefY));
+
+        // shearing
+        tools::Long nShearRefX=aRect.Left();
+        tools::Long nShearRefY=aRect.Bottom();
+        if (meDragMode==SdrDragMode::Rotate) { // use rotation axis as a reference for shearing, too
+            nShearRefX=aRotateAxe.X();
+            nShearRefY=aRotateAxe.Y();
+        }
+        aRetSet.Put(SdrAngleItem(SID_ATTR_TRANSFORM_SHEAR,GetMarkedObjShear()));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_X,nShearRefX));
+        aRetSet.Put(SfxInt32Item(SID_ATTR_TRANSFORM_SHEAR_Y,nShearRefY));
+
+        // check every object whether it is protected
+        const SdrMarkList& rMarkList=GetMarkedObjectList();
+        const size_t nMarkCount=rMarkList.GetMarkCount();
+        SdrObject* pObj=rMarkList.GetMark(0)->GetMarkedSdrObj();
+        bool bPosProt=pObj->IsMoveProtect();
+        bool bSizProt=pObj->IsResizeProtect();
+        bool bPosProtDontCare=false;
+        bool bSizProtDontCare=false;
+        for (size_t i=1; i<nMarkCount && (!bPosProtDontCare || !bSizProtDontCare); ++i)
+        {
+            pObj=rMarkList.GetMark(i)->GetMarkedSdrObj();
+            if (bPosProt!=pObj->IsMoveProtect()) bPosProtDontCare=true;
+            if (bSizProt!=pObj->IsResizeProtect()) bSizProtDontCare=true;
+        }
+
+        // InvalidateItem sets item to DONT_CARE
+        if (bPosProtDontCare) {
+            aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_PROTECT_POS);
+        } else {
+            aRetSet.Put(SfxBoolItem(SID_ATTR_TRANSFORM_PROTECT_POS,bPosProt));
+        }
+        if (bSizProtDontCare) {
+            aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_PROTECT_SIZE);
+        } else {
+            aRetSet.Put(SfxBoolItem(SID_ATTR_TRANSFORM_PROTECT_SIZE,bSizProt));
+        }
+
+        SfxItemState eState=aMarkAttr.GetItemState(SDRATTR_TEXT_AUTOGROWWIDTH);
+        bool bAutoGrow=aMarkAttr.Get(SDRATTR_TEXT_AUTOGROWWIDTH).GetValue();
+        if (eState==SfxItemState::DONTCARE) {
+            aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_AUTOWIDTH);
+        } else if (eState==SfxItemState::SET) {
+            aRetSet.Put(SfxBoolItem(SID_ATTR_TRANSFORM_AUTOWIDTH,bAutoGrow));
+        }
+
+        eState=aMarkAttr.GetItemState(SDRATTR_TEXT_AUTOGROWHEIGHT);
+        bAutoGrow=aMarkAttr.Get(SDRATTR_TEXT_AUTOGROWHEIGHT).GetValue();
+        if (eState==SfxItemState::DONTCARE) {
+            aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_AUTOHEIGHT);
+        } else if (eState==SfxItemState::SET) {
+            aRetSet.Put(SfxBoolItem(SID_ATTR_TRANSFORM_AUTOHEIGHT,bAutoGrow));
+        }
+
+        eState=aMarkAttr.GetItemState(SDRATTR_CORNER_RADIUS);
+        tools::Long nRadius=aMarkAttr.Get(SDRATTR_CORNER_RADIUS).GetValue();
+        if (eState==SfxItemState::DONTCARE) {
+            aRetSet.InvalidateItem(SDRATTR_CORNER_RADIUS);
+        } else if (eState==SfxItemState::SET) {
+            aRetSet.Put(makeSdrEckenradiusItem(nRadius));
+        }
+
+        basegfx::B2DHomMatrix aTransformation;
+
+        if(nMarkCount > 1)
+        {
+            // multiple objects, range is collected in aRect
+            aTransformation = basegfx::utils::createScaleTranslateB2DHomMatrix(
+                aRect.Left(), aRect.Top(),
+                aRect.getWidth(), aRect.getHeight());
+        }
+        else
+        {
+            // single object, get homogen transformation
+            basegfx::B2DPolyPolygon aPolyPolygon;
+
+            pObj->TRGetBaseGeometry(aTransformation, aPolyPolygon);
+        }
+
+        if(aTransformation.isIdentity())
+        {
+            aRetSet.InvalidateItem(SID_ATTR_TRANSFORM_MATRIX);
+        }
+        else
+        {
+            css::geometry::AffineMatrix2D aAffineMatrix2D;
+            Point aPageOffset(0, 0);
+
+            if(GetSdrPageView())
+            {
+                aPageOffset = GetSdrPageView()->GetPageOrigin();
+            }
+
+            aAffineMatrix2D.m00 = aTransformation.get(0, 0);
+            aAffineMatrix2D.m01 = aTransformation.get(0, 1);
+            aAffineMatrix2D.m02 = aTransformation.get(0, 2) - aPageOffset.X();
+            aAffineMatrix2D.m10 = aTransformation.get(1, 0);
+            aAffineMatrix2D.m11 = aTransformation.get(1, 1);
+            aAffineMatrix2D.m12 = aTransformation.get(1, 2) - aPageOffset.Y();
+
+            aRetSet.Put(AffineMatrixItem(&aAffineMatrix2D));
+        }
+    }
+
+    return aRetSet;
+}
+
+static Point ImpGetPoint(const tools::Rectangle& rRect, RectPoint eRP)
+{
+    switch(eRP) {
+        case RectPoint::LT: return rRect.TopLeft();
+        case RectPoint::MT: return rRect.TopCenter();
+        case RectPoint::RT: return rRect.TopRight();
+        case RectPoint::LM: return rRect.LeftCenter();
+        case RectPoint::MM: return rRect.Center();
+        case RectPoint::RM: return rRect.RightCenter();
+        case RectPoint::LB: return rRect.BottomLeft();
+        case RectPoint::MB: return rRect.BottomCenter();
+        case RectPoint::RB: return rRect.BottomRight();
+    }
+    return Point(); // Should not happen!
+}
+
+void SdrEditView::SetGeoAttrToMarked(const SfxItemSet& rAttr, bool addPageMargin)
+{
+    const bool bTiledRendering = comphelper::LibreOfficeKit::isActive();
+
+    tools::Rectangle aRect(GetMarkedObjRect());
+
+    if(GetSdrPageView())
+    {
+        if (addPageMargin)
+        {
+            SdrPage * pPage = GetSdrPageView()->GetPage();
+            Point upperLeft(pPage->GetLeftBorder(), pPage->GetUpperBorder());
+            aRect.Move(upperLeft.getX(), upperLeft.getY());
+        }
+        GetSdrPageView()->LogicToPagePos(aRect);
+    }
+
+    Degree100 nOldRotateAngle=GetMarkedObjRotate();
+    Degree100 nOldShearAngle=GetMarkedObjShear();
+    const SdrMarkList& rMarkList=GetMarkedObjectList();
+    SdrObject* pObj=nullptr;
+
+    RectPoint eSizePoint=RectPoint::MM;
+    tools::Long nPosDX=0;
+    tools::Long nPosDY=0;
+    tools::Long nSizX=0;
+    tools::Long nSizY=0;
+    Degree100 nRotateAngle(0);
+
+    bool bModeIsRotate(meDragMode == SdrDragMode::Rotate);
+    tools::Long nRotateX(0);
+    tools::Long nRotateY(0);
+    tools::Long nOldRotateX(0);
+    tools::Long nOldRotateY(0);
+    if(bModeIsRotate)
+    {
+        Point aRotateAxe(maRef1);
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->LogicToPagePos(aRotateAxe);
+        }
+
+        nRotateX = nOldRotateX = aRotateAxe.X();
+        nRotateY = nOldRotateY = aRotateAxe.Y();
+    }
+
+    Degree100 nShearAngle(0);
+    tools::Long nShearX=0;
+    tools::Long nShearY=0;
+    bool bShearVert=false;
+
+    bool bChgPos=false;
+    bool bChgSiz=false;
+    bool bChgWdh=false;
+    bool bChgHgt=false;
+    bool bRotate=false;
+    bool bShear =false;
+
+    bool bSetAttr=false;
+    SfxItemSet aSetAttr(mpModel->GetItemPool());
+
+    // position
+    if (const SfxInt32Item *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_POS_X))
+    {
+        nPosDX = pPoolItem->GetValue() - aRect.Left();
+        bChgPos=true;
+    }
+    if (const SfxInt32Item *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_POS_Y))
+    {
+        nPosDY = pPoolItem->GetValue() - aRect.Top();
+        bChgPos=true;
+    }
+    // size
+    if (const SfxUInt32Item *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_WIDTH))
+    {
+        nSizX = pPoolItem->GetValue();
+        bChgSiz=true;
+        bChgWdh=true;
+    }
+    if (const SfxUInt32Item *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_HEIGHT))
+    {
+        nSizY = pPoolItem->GetValue();
+        bChgSiz=true;
+        bChgHgt=true;
+    }
+    if (bChgSiz) {
+        if (bTiledRendering && SfxItemState::SET != rAttr.GetItemState(SID_ATTR_TRANSFORM_SIZE_POINT))
+            eSizePoint = RectPoint::LT;
+        else
+            eSizePoint = static_cast<RectPoint>(rAttr.Get(SID_ATTR_TRANSFORM_SIZE_POINT).GetValue());
+    }
+
+    // rotation
+    if (const SdrAngleItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_DELTA_ANGLE))
+    {
+        nRotateAngle = pPoolItem->GetValue();
+        bRotate = (nRotateAngle != 0_deg100);
+    }
+
+    // rotation
+    if (const SdrAngleItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_ANGLE))
+    {
+        nRotateAngle = pPoolItem->GetValue() - nOldRotateAngle;
+        bRotate = (nRotateAngle != 0_deg100);
+    }
+
+    // position rotation point x
+    if(bRotate || rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_ROT_X))
+        nRotateX = rAttr.Get(SID_ATTR_TRANSFORM_ROT_X).GetValue();
+
+    // position rotation point y
+    if(bRotate || rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_ROT_Y))
+        nRotateY = rAttr.Get(SID_ATTR_TRANSFORM_ROT_Y).GetValue();
+
+    // shearing
+    if (const SdrAngleItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_SHEAR))
+    {
+        Degree100 nNewShearAngle=pPoolItem->GetValue();
+        if (nNewShearAngle>SDRMAXSHEAR) nNewShearAngle=SDRMAXSHEAR;
+        if (nNewShearAngle<-SDRMAXSHEAR) nNewShearAngle=-SDRMAXSHEAR;
+        if (nNewShearAngle!=nOldShearAngle) {
+            bShearVert = rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_VERTICAL).GetValue();
+            if (bShearVert) {
+                nShearAngle=nNewShearAngle;
+            } else {
+                if (nNewShearAngle!=0_deg100 && nOldShearAngle!=0_deg100) {
+                    // bug fix
+                    double nOld = tan(toRadians(nOldShearAngle));
+                    double nNew = tan(toRadians(nNewShearAngle));
+                    nNew-=nOld;
+                    nNew = basegfx::rad2deg<100>(atan(nNew));
+                    nShearAngle=Degree100(FRound(nNew));
+                } else {
+                    nShearAngle=nNewShearAngle-nOldShearAngle;
+                }
+            }
+            bShear=nShearAngle!=0_deg100;
+            if (bShear) {
+                nShearX=static_cast<const SfxInt32Item&>(rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_X)).GetValue();
+                nShearY=static_cast<const SfxInt32Item&>(rAttr.Get(SID_ATTR_TRANSFORM_SHEAR_Y)).GetValue();
+            }
+        }
+    }
+
+    // AutoGrow
+    if (const SfxBoolItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_AUTOWIDTH))
+    {
+        bool bAutoGrow = pPoolItem->GetValue();
+        aSetAttr.Put(makeSdrTextAutoGrowWidthItem(bAutoGrow));
+        bSetAttr=true;
+    }
+
+    if (const SfxBoolItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_AUTOHEIGHT))
+    {
+        bool bAutoGrow = pPoolItem->GetValue();
+        aSetAttr.Put(makeSdrTextAutoGrowHeightItem(bAutoGrow));
+        bSetAttr=true;
+    }
+
+    // corner radius
+    if (m_bEdgeRadiusAllowed)
+        if (const SdrMetricItem *pPoolItem = rAttr.GetItemIfSet(SDRATTR_CORNER_RADIUS))
+        {
+            tools::Long nRadius = pPoolItem->GetValue();
+            aSetAttr.Put(makeSdrEckenradiusItem(nRadius));
+            bSetAttr=true;
+        }
+
+    ForcePossibilities();
+
+    BegUndo(SvxResId(STR_EditTransform),GetDescriptionOfMarkedObjects());
+
+    if (bSetAttr) {
+        SetAttrToMarked(aSetAttr,false);
+    }
+
+    // change size and height
+    if (bChgSiz && (m_bResizeFreeAllowed || m_bResizePropAllowed)) {
+        Fraction aWdt(nSizX,aRect.Right()-aRect.Left());
+        Fraction aHgt(nSizY,aRect.Bottom()-aRect.Top());
+        Point aRef(ImpGetPoint(aRect,eSizePoint));
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->PagePosToLogic(aRef);
+        }
+
+        ResizeMultMarkedObj(aRef, aWdt, aHgt, bChgWdh, bChgHgt);
+    }
+
+    // rotate
+    if (bRotate && (m_bRotateFreeAllowed || m_bRotate90Allowed)) {
+        Point aRef(nRotateX,nRotateY);
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->PagePosToLogic(aRef);
+        }
+
+        RotateMarkedObj(aRef,nRotateAngle);
+    }
+
+    // set rotation point position
+    if(bModeIsRotate && (nRotateX != nOldRotateX || nRotateY != nOldRotateY))
+    {
+        Point aNewRef1(nRotateX, nRotateY);
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->PagePosToLogic(aNewRef1);
+        }
+
+        SetRef1(aNewRef1);
+    }
+
+    // shear
+    if (bShear && m_bShearAllowed) {
+        Point aRef(nShearX,nShearY);
+
+        if(GetSdrPageView())
+        {
+            GetSdrPageView()->PagePosToLogic(aRef);
+        }
+
+        ShearMarkedObj(aRef,nShearAngle,bShearVert);
+
+        // #i74358#
+        // ShearMarkedObj creates a linear combination of the existing transformation and
+        // the new shear to apply. If the object is already transformed (e.g. rotated) the
+        // linear combination will not decompose to the same start values again, but to a
+        // new combination. Thus it makes no sense to check if the wanted shear is reached
+        // or not. Taking out.
+    }
+
+    // change position
+    if (bChgPos && m_bMoveAllowed) {
+        MoveMarkedObj(Size(nPosDX,nPosDY));
+    }
+
+    const size_t nMarkCount=rMarkList.GetMarkCount();
+    // protect position
+    if(const SfxBoolItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_PROTECT_POS))
+    {
+        const bool bProtPos(pPoolItem->GetValue());
+        bool bChanged(false);
+
+        for(size_t i = 0; i < nMarkCount; ++i)
+        {
+            pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+
+            if(pObj->IsMoveProtect() != bProtPos)
+            {
+                bChanged = true;
+                pObj->SetMoveProtect(bProtPos);
+
+                if(bProtPos)
+                {
+                    pObj->SetResizeProtect(true);
+                }
+            }
+        }
+
+        if(bChanged)
+        {
+            m_bMoveProtect = bProtPos;
+
+            if(bProtPos)
+            {
+                m_bResizeProtect = true;
+            }
+
+            // #i77187# there is no simple method to get the toolbars updated
+            // in the application. The App is listening to selection change and i
+            // will use it here (even if not true). It's acceptable since changing
+            // this model data is pretty rare and only possible using the F4 dialog
+            MarkListHasChanged();
+        }
+    }
+
+    if(!m_bMoveProtect)
+    {
+        // protect size
+        if(const SfxBoolItem *pPoolItem = rAttr.GetItemIfSet(SID_ATTR_TRANSFORM_PROTECT_SIZE))
+        {
+            const bool bProtSize(pPoolItem->GetValue());
+            bool bChanged(false);
+
+            for(size_t i = 0; i < nMarkCount; ++i)
+            {
+                pObj = rMarkList.GetMark(i)->GetMarkedSdrObj();
+
+                if(pObj->IsResizeProtect() != bProtSize)
+                {
+                    bChanged = true;
+                    pObj->SetResizeProtect(bProtSize);
+                }
+            }
+
+            if(bChanged)
+            {
+                m_bResizeProtect = bProtSize;
+
+                // #i77187# see above
+                MarkListHasChanged();
+            }
+        }
+    }
+
+    EndUndo();
+}
+
+
+bool SdrEditView::IsAlignPossible() const
+{  // at least two selected objects, at least one of them movable
+    ForcePossibilities();
+    const size_t nCount=GetMarkedObjectCount();
+    if (nCount==0) return false;         // nothing selected!
+    if (nCount==1) return m_bMoveAllowed;  // align single object to page
+    return m_bOneOrMoreMovable;          // otherwise: MarkCount>=2
+}
+
+void SdrEditView::AlignMarkedObjects(SdrHorAlign eHor, SdrVertAlign eVert)
+{
+    if (eHor==SdrHorAlign::NONE && eVert==SdrVertAlign::NONE)
+        return;
+
+    SortMarkedObjects();
+    if (!GetMarkedObjectCount())
+        return;
+
+    const bool bUndo = IsUndoEnabled();
+    if( bUndo )
+    {
+        EndTextEditCurrentView();
+        OUString aStr(GetDescriptionOfMarkedObjects());
+        if (eHor==SdrHorAlign::NONE)
+        {
+            switch (eVert)
+            {
+                case SdrVertAlign::Top:
+                    aStr = ImpGetDescriptionString(STR_EditAlignVTop);
+                    break;
+                case SdrVertAlign::Bottom:
+                    aStr = ImpGetDescriptionString(STR_EditAlignVBottom);
+                    break;
+                case SdrVertAlign::Center:
+                    aStr = ImpGetDescriptionString(STR_EditAlignVCenter);
+                    break;
+                default: break;
+            }
+        }
+        else if (eVert==SdrVertAlign::NONE)
+        {
+            switch (eHor)
+            {
+                case SdrHorAlign::Left:
+                    aStr = ImpGetDescriptionString(STR_EditAlignHLeft);
+                    break;
+                case SdrHorAlign::Right:
+                    aStr = ImpGetDescriptionString(STR_EditAlignHRight);
+                    break;
+                case SdrHorAlign::Center:
+                    aStr = ImpGetDescriptionString(STR_EditAlignHCenter);
+                    break;
+                default: break;
+            }
+        }
+        else if (eHor==SdrHorAlign::Center && eVert==SdrVertAlign::Center)
+        {
+            aStr = ImpGetDescriptionString(STR_EditAlignCenter);
+        }
+        else
+        {
+            aStr = ImpGetDescriptionString(STR_EditAlign);
+        }
+        BegUndo(aStr);
+    }
+
+    tools::Rectangle aBound;
+    const size_t nMarkCount=GetMarkedObjectCount();
+    bool bHasFixed=false;
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        SdrObjTransformInfoRec aInfo;
+        pObj->TakeObjInfo(aInfo);
+        if (!aInfo.bMoveAllowed || pObj->IsMoveProtect())
+        {
+            tools::Rectangle aObjRect(pObj->GetSnapRect());
+            aBound.Union(aObjRect);
+            bHasFixed=true;
+        }
+    }
+    if (!bHasFixed)
+    {
+        if (nMarkCount==1)
+        {   // align single object to page
+            const SdrObject* pObj=GetMarkedObjectByIndex(0);
+            const SdrPage* pPage=pObj->getSdrPageFromSdrObject();
+            const SdrPageGridFrameList* pGFL=pPage->GetGridFrameList(GetSdrPageViewOfMarkedByIndex(0),&(pObj->GetSnapRect()));
+            const SdrPageGridFrame* pFrame=nullptr;
+            if (pGFL!=nullptr && pGFL->GetCount()!=0)
+            { // Writer
+                pFrame=&((*pGFL)[0]);
+            }
+
+            if (pFrame!=nullptr)
+            { // Writer
+                aBound=pFrame->GetUserArea();
+            }
+            else
+            {
+                aBound=tools::Rectangle(pPage->GetLeftBorder(),pPage->GetUpperBorder(),
+                                 pPage->GetWidth()-pPage->GetRightBorder(),
+                                 pPage->GetHeight()-pPage->GetLowerBorder());
+            }
+        }
+        else
+        {
+            aBound=GetMarkedObjRect();
+        }
+    }
+    Point aCenter(aBound.Center());
+    for (size_t nm=0; nm<nMarkCount; ++nm)
+    {
+        SdrMark* pM=GetSdrMarkByIndex(nm);
+        SdrObject* pObj=pM->GetMarkedSdrObj();
+        SdrObjTransformInfoRec aInfo;
+        pObj->TakeObjInfo(aInfo);
+        if (aInfo.bMoveAllowed && !pObj->IsMoveProtect())
+        {
+            tools::Long nXMov=0;
+            tools::Long nYMov=0;
+            tools::Rectangle aObjRect(pObj->GetSnapRect());
+            switch (eVert)
+            {
+                case SdrVertAlign::Top   : nYMov=aBound.Top()   -aObjRect.Top()       ; break;
+                case SdrVertAlign::Bottom: nYMov=aBound.Bottom()-aObjRect.Bottom()    ; break;
+                case SdrVertAlign::Center: nYMov=aCenter.Y()    -aObjRect.Center().Y(); break;
+                default: break;
+            }
+            switch (eHor)
+            {
+                case SdrHorAlign::Left  : nXMov=aBound.Left()  -aObjRect.Left()      ; break;
+                case SdrHorAlign::Right : nXMov=aBound.Right() -aObjRect.Right()     ; break;
+                case SdrHorAlign::Center: nXMov=aCenter.X()    -aObjRect.Center().X(); break;
+                default: break;
+            }
+            if (nXMov!=0 || nYMov!=0)
+            {
+                // SdrEdgeObj needs an extra SdrUndoGeoObj since the
+                // connections may need to be saved
+                if( bUndo )
+                {
+                    if( dynamic_cast<SdrEdgeObj*>(pObj) )
+                    {
+                        AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoGeoObject(*pObj));
+                    }
+
+                    AddUndo(GetModel()->GetSdrUndoFactory().CreateUndoMoveObject(*pObj,Size(nXMov,nYMov)));
+                }
+
+                pObj->Move(Size(nXMov,nYMov));
+            }
+        }
+    }
+
+    if( bUndo )
+        EndUndo();
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */