Adding upstream version 4:7.4.7.upstream/4%7.4.7upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 4042 insertions, 0 deletions

diff --git a/svx/source/unodraw/unoshape.cxx b/svx/source/unodraw/unoshape.cxx
new file mode 100644
index 000000000..a0c81180d
--- /dev/null
+++ b/svx/source/unodraw/unoshape.cxx
@@ -0,0 +1,4042 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
+/*
+ * This file is part of the LibreOffice project.
+ *
+ * This Source Code Form is subject to the terms of the Mozilla Public
+ * License, v. 2.0. If a copy of the MPL was not distributed with this
+ * file, You can obtain one at http://mozilla.org/MPL/2.0/.
+ *
+ * This file incorporates work covered by the following license notice:
+ *
+ *   Licensed to the Apache Software Foundation (ASF) under one or more
+ *   contributor license agreements. See the NOTICE file distributed
+ *   with this work for additional information regarding copyright
+ *   ownership. The ASF licenses this file to you under the Apache
+ *   License, Version 2.0 (the "License"); you may not use this file
+ *   except in compliance with the License. You may obtain a copy of
+ *   the License at http://www.apache.org/licenses/LICENSE-2.0 .
+ */
+
+#include <cppuhelper/supportsservice.hxx>
+#include <com/sun/star/awt/XBitmap.hpp>
+#include <com/sun/star/awt/Rectangle.hpp>
+#include <com/sun/star/drawing/CircleKind.hpp>
+#include <com/sun/star/lang/NoSupportException.hpp>
+#include <vcl/svapp.hxx>
+#include <svl/itemprop.hxx>
+#include <o3tl/any.hxx>
+#include <osl/mutex.hxx>
+#include <editeng/unotext.hxx>
+#include <svx/svdobj.hxx>
+#include <svx/svdoole2.hxx>
+#include <svx/shapepropertynotifier.hxx>
+#include <comphelper/interfacecontainer3.hxx>
+#include <comphelper/scopeguard.hxx>
+#include <comphelper/servicehelper.hxx>
+#include <toolkit/helper/vclunohelper.hxx>
+#include <vcl/gfxlink.hxx>
+#include <vcl/virdev.hxx>
+#include <svx/sdangitm.hxx>
+#include <svx/svdlayer.hxx>
+#include <svx/svdopage.hxx>
+#include <svx/xflbstit.hxx>
+#include <svx/xflbmtit.hxx>
+#include <svx/xlnstit.hxx>
+#include <svx/xlnedit.hxx>
+#include <svx/svdmodel.hxx>
+#include <svx/svdobjkind.hxx>
+#include <svx/unopage.hxx>
+#include <svx/unoshape.hxx>
+#include <svx/unoshtxt.hxx>
+#include <svx/svdpage.hxx>
+#include <svx/unoshprp.hxx>
+#include <svx/svdograf.hxx>
+#include <svx/unoapi.hxx>
+#include <svx/svdomeas.hxx>
+#include <svx/svdpool.hxx>
+#include <tools/diagnose_ex.h>
+#include <tools/stream.hxx>
+#include <tools/gen.hxx>
+#include <tools/UnitConversion.hxx>
+#include <svx/svdoedge.hxx>
+#include <svx/svdocapt.hxx>
+#include <svx/obj3d.hxx>
+#include <svx/xflftrit.hxx>
+#include <svx/xtable.hxx>
+#include <svx/xbtmpit.hxx>
+#include <svx/xfillit0.hxx>
+#include <svx/xflgrit.hxx>
+#include <svx/xflhtit.hxx>
+#include <svx/xlineit0.hxx>
+#include <svx/xlndsit.hxx>
+#include <svx/unomaster.hxx>
+#include <basegfx/matrix/b2dhommatrix.hxx>
+#include <basegfx/matrix/b2dhommatrixtools.hxx>
+#include <basegfx/polygon/b2dpolypolygontools.hxx>
+#include "gluepts.hxx"
+#include "shapeimpl.hxx"
+#include <sal/log.hxx>
+
+#include <svx/lathe3d.hxx>
+#include <extrud3d.hxx>
+#include <svx/sdr/contact/viewcontact.hxx>
+#include <drawinglayer/converters.hxx>
+#include <drawinglayer/geometry/viewinformation2d.hxx>
+#include <drawinglayer/primitive2d/transformprimitive2d.hxx>
+
+#include <vcl/gdimtf.hxx>
+#include <vcl/wmf.hxx>
+#include <svx/sdtfsitm.hxx>
+#include <svx/svdopath.hxx>
+#include <svx/SvxXTextColumns.hxx>
+#include <svx/xflclit.hxx>
+
+#include <memory>
+#include <optional>
+#include <vector>
+#include <iostream>
+
+#include <bitmaps.hlst>
+
+using namespace ::osl;
+using namespace ::cppu;
+using namespace ::com::sun::star;
+using namespace ::com::sun::star::uno;
+using namespace ::com::sun::star::lang;
+using namespace ::com::sun::star::container;
+using svx::PropertyValueProvider;
+
+class GDIMetaFile;
+
+struct SvxShapeImpl
+{
+    std::optional<SfxItemSet> mxItemSet;
+    SdrObjKind      mnObjId;
+    SvxShapeMaster* mpMaster;
+    bool            mbHasSdrObjectOwnership;
+    bool            mbDisposing;
+
+    /** CL, OD 2005-07-19 #i52126# - this is initially 0 and set when
+     *  a SvxShape::Create() call is executed. It is then set to the created
+     *  SdrObject so a multiple call to SvxShape::Create() with same SdrObject
+     *  is prohibited.
+     */
+    ::tools::WeakReference< SdrObject > mpCreatedObj;
+
+    // for xComponent
+    ::comphelper::OInterfaceContainerHelper3<css::lang::XEventListener> maDisposeListeners;
+    svx::PropertyChangeNotifier       maPropertyNotifier;
+
+    SvxShapeImpl( SvxShape& _rAntiImpl, ::osl::Mutex& _rMutex )
+        :mnObjId( SdrObjKind::NONE )
+        ,mpMaster( nullptr )
+        ,mbHasSdrObjectOwnership( false )
+        ,mbDisposing( false )
+        ,maDisposeListeners( _rMutex )
+        ,maPropertyNotifier( _rAntiImpl, _rMutex )
+    {
+    }
+};
+
+namespace {
+
+class ShapePositionProvider : public PropertyValueProvider
+{
+public:
+    explicit ShapePositionProvider( SvxShape& _shape )
+        :PropertyValueProvider( _shape, "Position" )
+    {
+    }
+
+protected:
+    virtual void getCurrentValue( Any& _out_rCurrentValue ) const override
+    {
+        _out_rCurrentValue <<= static_cast< SvxShape& >( getContext() ).getPosition();
+    }
+};
+
+
+class ShapeSizeProvider : public PropertyValueProvider
+{
+public:
+    static constexpr OUStringLiteral sSize = u"Size";
+    explicit ShapeSizeProvider( SvxShape& _shape )
+        :PropertyValueProvider( _shape, sSize )
+    {
+    }
+
+protected:
+    virtual void getCurrentValue( Any& _out_rCurrentValue ) const override
+    {
+        _out_rCurrentValue <<= static_cast< SvxShape& >( getContext() ).getSize();
+    }
+};
+
+/// Calculates what scaling factor will be used for autofit text scaling of this shape.
+sal_Int16 GetTextFitToSizeScale(SdrObject* pObject)
+{
+    SdrTextObj* pTextObj = dynamic_cast<SdrTextObj*>(pObject);
+    if (!pTextObj)
+    {
+        return 0;
+    }
+
+    const SfxItemSet& rTextObjSet = pTextObj->GetMergedItemSet();
+    if (rTextObjSet.GetItem<SdrTextFitToSizeTypeItem>(SDRATTR_TEXT_FITTOSIZE)->GetValue()
+        != drawing::TextFitToSizeType_AUTOFIT)
+    {
+        return 0;
+    }
+
+    return pTextObj->GetFontScaleY();
+}
+}
+
+SvxShape::SvxShape( SdrObject* pObject )
+:   maSize(100,100)
+,   mpImpl( new SvxShapeImpl( *this, m_aMutex ) )
+,   mbIsMultiPropertyCall(false)
+,   mpPropSet(getSvxMapProvider().GetPropertySet(SVXMAP_SHAPE, SdrObject::GetGlobalDrawObjectItemPool()))
+,   maPropMapEntries(getSvxMapProvider().GetMap(SVXMAP_SHAPE))
+,   mpSdrObjectWeakReference(pObject)
+,   mnLockCount(0)
+{
+    impl_construct();
+}
+
+
+SvxShape::SvxShape( SdrObject* pObject, const SfxItemPropertyMapEntry* pEntries, const SvxItemPropertySet* pPropertySet )
+:   maSize(100,100)
+,   mpImpl( new SvxShapeImpl( *this, m_aMutex ) )
+,   mbIsMultiPropertyCall(false)
+,   mpPropSet(pPropertySet)
+,   maPropMapEntries(pEntries)
+,   mpSdrObjectWeakReference(pObject)
+,   mnLockCount(0)
+{
+    impl_construct();
+}
+
+
+SvxShape::~SvxShape() noexcept
+{
+    ::SolarMutexGuard aGuard;
+
+    DBG_ASSERT( mnLockCount == 0, "Locked shape was disposed!" );
+
+    if ( mpImpl->mpMaster )
+        mpImpl->mpMaster->dispose();
+
+    if ( HasSdrObject() )
+    {
+        EndListening(GetSdrObject()->getSdrModelFromSdrObject());
+        GetSdrObject()->setUnoShape(nullptr);
+    }
+
+    if( HasSdrObjectOwnership() && HasSdrObject() )
+    {
+        mpImpl->mbHasSdrObjectOwnership = false;
+        SdrObject* pObject = GetSdrObject();
+        SdrObject::Free( pObject );
+    }
+
+    EndListeningAll(); // call explicitly within SolarMutexGuard
+}
+
+
+void SvxShape::TakeSdrObjectOwnership()
+{
+    mpImpl->mbHasSdrObjectOwnership = true;
+}
+
+
+void SvxShape::InvalidateSdrObject()
+{
+    if(HasSdrObject())
+    {
+        EndListening(GetSdrObject()->getSdrModelFromSdrObject());
+    }
+
+    if (HasSdrObjectOwnership())
+        return;
+
+    mpSdrObjectWeakReference.reset(nullptr);
+};
+
+bool SvxShape::HasSdrObjectOwnership() const
+{
+    if ( !mpImpl->mbHasSdrObjectOwnership )
+        return false;
+
+    OSL_ENSURE( HasSdrObject(), "SvxShape::HasSdrObjectOwnership: have the ownership of an object which I don't know!" );
+    return HasSdrObject();
+}
+
+
+void SvxShape::setShapeKind( SdrObjKind nKind )
+{
+    mpImpl->mnObjId = nKind;
+}
+
+
+SdrObjKind SvxShape::getShapeKind() const
+{
+    return mpImpl->mnObjId;
+}
+
+
+void SvxShape::setMaster( SvxShapeMaster* pMaster )
+{
+    mpImpl->mpMaster = pMaster;
+}
+
+
+uno::Any SAL_CALL SvxShape::queryAggregation( const uno::Type& rType )
+{
+    if( mpImpl->mpMaster )
+    {
+        uno::Any aAny;
+        if( mpImpl->mpMaster->queryAggregation( rType, aAny ) )
+            return aAny;
+    }
+
+    return SvxShape_UnoImplHelper::queryAggregation(rType);
+}
+
+const css::uno::Sequence< sal_Int8 > & SvxShape::getUnoTunnelId() noexcept
+{
+    static const comphelper::UnoIdInit theSvxShapeUnoTunnelId;
+    return theSvxShapeUnoTunnelId.getSeq();
+}
+
+sal_Int64 SAL_CALL SvxShape::getSomething( const css::uno::Sequence< sal_Int8 >& rId )
+{
+    return comphelper::getSomethingImpl(rId, this);
+}
+
+
+svx::PropertyChangeNotifier& SvxShape::getShapePropertyChangeNotifier()
+{
+    return mpImpl->maPropertyNotifier;
+}
+
+
+void SvxShape::impl_construct()
+{
+    mpImpl->maPropertyNotifier.registerProvider( svx::ShapePropertyProviderId::Position,
+        std::make_unique<ShapePositionProvider>( *this ) );
+    mpImpl->maPropertyNotifier.registerProvider( svx::ShapePropertyProviderId::Size,
+        std::make_unique<ShapeSizeProvider>( *this ) );
+
+    if ( HasSdrObject() )
+    {
+        StartListening(GetSdrObject()->getSdrModelFromSdrObject());
+        impl_initFromSdrObject();
+    }
+}
+
+
+void SvxShape::impl_initFromSdrObject()
+{
+    DBG_TESTSOLARMUTEX();
+    OSL_PRECOND( HasSdrObject(), "SvxShape::impl_initFromSdrObject: not to be called without SdrObject!" );
+    if ( !HasSdrObject() )
+        return;
+
+    osl_atomic_increment( &m_refCount );
+    {
+        GetSdrObject()->setUnoShape(this);
+    }
+    osl_atomic_decrement( &m_refCount );
+
+    // #i40944#
+    // Do not simply return when no model but do the type corrections
+    // following below.
+    const SdrInventor nInventor = GetSdrObject()->GetObjInventor();
+
+    // is it one of ours (svx) ?
+    if( !(nInventor == SdrInventor::Default || nInventor == SdrInventor::E3d || nInventor == SdrInventor::FmForm) )
+        return;
+
+    if(nInventor == SdrInventor::FmForm)
+    {
+        mpImpl->mnObjId = SdrObjKind::UNO;
+    }
+    else
+    {
+        mpImpl->mnObjId = GetSdrObject()->GetObjIdentifier();
+    }
+
+    switch(mpImpl->mnObjId)
+    {
+    case SdrObjKind::CircleCut:          // segment of circle
+    case SdrObjKind::CircleArc:          // arc of circle
+    case SdrObjKind::CircleSection:          // sector
+        mpImpl->mnObjId = SdrObjKind::CircleOrEllipse;
+        break;
+    default: ;
+    }
+}
+
+
+void SvxShape::Create( SdrObject* pNewObj, SvxDrawPage* /*pNewPage*/ )
+{
+    DBG_TESTSOLARMUTEX();
+
+    assert( pNewObj && "SvxShape::Create: invalid new object!" );
+    if ( !pNewObj )
+        return;
+
+    SdrObject* pCreatedObj = mpImpl->mpCreatedObj.get();
+    assert( ( !pCreatedObj || ( pCreatedObj == pNewObj ) ) &&
+        "SvxShape::Create: the same shape used for two different objects?! Strange ..." );
+
+    // Correct condition (#i52126#)
+    if ( pCreatedObj == pNewObj )
+        return;
+
+    // Correct condition (#i52126#)
+    mpImpl->mpCreatedObj = pNewObj;
+
+    if( HasSdrObject() )
+    {
+        EndListening( GetSdrObject()->getSdrModelFromSdrObject() );
+    }
+
+    mpSdrObjectWeakReference.reset( pNewObj );
+
+    if( HasSdrObject() )
+    {
+        StartListening( GetSdrObject()->getSdrModelFromSdrObject() );
+    }
+
+    OSL_ENSURE( !mbIsMultiPropertyCall, "SvxShape::Create: hmm?" );
+        // this was previously set in impl_initFromSdrObject, but I think it was superfluous
+        // (it definitely was in the other context where it was called, but I strongly suppose
+        // it was also superfluous when called from here)
+    impl_initFromSdrObject();
+
+    ObtainSettingsFromPropertySet( *mpPropSet );
+
+    // save user call
+    SdrObjUserCall* pUser = GetSdrObject()->GetUserCall();
+    GetSdrObject()->SetUserCall(nullptr);
+
+    setPosition( maPosition );
+    setSize( maSize );
+
+    // restore user call after we set the initial size
+    GetSdrObject()->SetUserCall( pUser );
+
+    // if this shape was already named, use this name
+    if( !maShapeName.isEmpty() )
+    {
+        GetSdrObject()->SetName( maShapeName );
+        maShapeName.clear();
+    }
+}
+
+void SvxShape::ForceMetricToItemPoolMetric(Pair& rPoint) const noexcept
+{
+    DBG_TESTSOLARMUTEX();
+    if(!HasSdrObject())
+        return;
+
+    MapUnit eMapUnit(GetSdrObject()->getSdrModelFromSdrObject().GetItemPool().GetMetric(0));
+    if(eMapUnit == MapUnit::Map100thMM)
+        return;
+
+    if (const auto eTo = MapToO3tlLength(eMapUnit); eTo != o3tl::Length::invalid)
+    {
+        rPoint.A() = o3tl::convert(rPoint.A(), o3tl::Length::mm100, eTo);
+        rPoint.B() = o3tl::convert(rPoint.B(), o3tl::Length::mm100, eTo);
+    }
+    else
+    {
+        OSL_FAIL("AW: Missing unit translation to PoolMetric!");
+    }
+}
+
+void SvxShape::ForceMetricToItemPoolMetric(basegfx::B2DPolyPolygon& rPolyPolygon) const noexcept
+{
+    DBG_TESTSOLARMUTEX();
+    if(!HasSdrObject())
+        return;
+
+    GetSdrObject()->ForceMetricToItemPoolMetric(rPolyPolygon);
+}
+
+void SvxShape::ForceMetricToItemPoolMetric(basegfx::B2DHomMatrix& rB2DHomMatrix) const noexcept
+{
+    DBG_TESTSOLARMUTEX();
+    if(!HasSdrObject())
+        return;
+
+    MapUnit eMapUnit(GetSdrObject()->getSdrModelFromSdrObject().GetItemPool().GetMetric(0));
+    if(eMapUnit == MapUnit::Map100thMM)
+        return;
+
+    if (const auto eTo = MapToO3tlLength(eMapUnit); eTo != o3tl::Length::invalid)
+    {
+        const double fConvert(o3tl::convert(1.0, o3tl::Length::mm100, eTo));
+        const basegfx::utils::B2DHomMatrixBufferedDecompose aDecomposedTransform(rB2DHomMatrix);
+        rB2DHomMatrix = basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+            aDecomposedTransform.getScale() * fConvert,
+            aDecomposedTransform.getShearX(),
+            aDecomposedTransform.getRotate(),
+            aDecomposedTransform.getTranslate() * fConvert);
+    }
+    else
+    {
+        OSL_FAIL("Missing unit translation to PoolMetric!");
+    }
+}
+
+void SvxShape::ForceMetricTo100th_mm(Pair& rPoint) const noexcept
+{
+    DBG_TESTSOLARMUTEX();
+    if(!HasSdrObject())
+        return;
+
+    MapUnit eMapUnit = GetSdrObject()->getSdrModelFromSdrObject().GetItemPool().GetMetric(0);
+    if(eMapUnit == MapUnit::Map100thMM)
+        return;
+
+    if (const auto eFrom = MapToO3tlLength(eMapUnit); eFrom != o3tl::Length::invalid)
+    {
+        rPoint.A() = o3tl::convert(rPoint.A(), eFrom, o3tl::Length::mm100);
+        rPoint.B() = o3tl::convert(rPoint.B(), eFrom, o3tl::Length::mm100);
+    }
+    else
+    {
+        OSL_FAIL("AW: Missing unit translation to 100th mm!");
+    }
+}
+
+void SvxShape::ForceMetricTo100th_mm(basegfx::B2DPolyPolygon& rPolyPolygon) const noexcept
+{
+    DBG_TESTSOLARMUTEX();
+    if(!HasSdrObject())
+        return;
+
+    MapUnit eMapUnit = GetSdrObject()->getSdrModelFromSdrObject().GetItemPool().GetMetric(0);
+    if(eMapUnit == MapUnit::Map100thMM)
+        return;
+
+    if (const auto eFrom = MapToO3tlLength(eMapUnit); eFrom != o3tl::Length::invalid)
+    {
+        const double fConvert(o3tl::convert(1.0, eFrom, o3tl::Length::mm100));
+        rPolyPolygon.transform(basegfx::utils::createScaleB2DHomMatrix(fConvert, fConvert));
+    }
+    else
+    {
+        OSL_FAIL("Missing unit translation to 100th mm!");
+    }
+}
+
+void SvxShape::ForceMetricTo100th_mm(basegfx::B2DHomMatrix& rB2DHomMatrix) const noexcept
+{
+    DBG_TESTSOLARMUTEX();
+    if(!HasSdrObject())
+        return;
+
+    MapUnit eMapUnit = GetSdrObject()->getSdrModelFromSdrObject().GetItemPool().GetMetric(0);
+    if(eMapUnit == MapUnit::Map100thMM)
+        return;
+
+    if (const auto eFrom = MapToO3tlLength(eMapUnit); eFrom != o3tl::Length::invalid)
+    {
+        const double fConvert(o3tl::convert(1.0, eFrom, o3tl::Length::mm100));
+        const basegfx::utils::B2DHomMatrixBufferedDecompose aDecomposedTransform(rB2DHomMatrix);
+        rB2DHomMatrix = basegfx::utils::createScaleShearXRotateTranslateB2DHomMatrix(
+            aDecomposedTransform.getScale() * fConvert,
+            aDecomposedTransform.getShearX(),
+            aDecomposedTransform.getRotate(),
+            aDecomposedTransform.getTranslate() * fConvert);
+    }
+    else
+    {
+        OSL_FAIL("Missing unit translation to 100th mm!");
+    }
+}
+
+static void SvxItemPropertySet_ObtainSettingsFromPropertySet(const SvxItemPropertySet& rPropSet, SvxItemPropertySetUsrAnys& rAnys,
+  SfxItemSet& rSet, const uno::Reference< beans::XPropertySet >& xSet, const SfxItemPropertyMap* pMap )
+{
+    if(!rAnys.AreThereOwnUsrAnys())
+        return;
+
+    const SfxItemPropertyMap& rSrc = rPropSet.getPropertyMap();
+
+    for(const SfxItemPropertyMapEntry* pSrcProp : rSrc.getPropertyEntries())
+    {
+        const sal_uInt16 nWID = pSrcProp->nWID;
+        if(SfxItemPool::IsWhich(nWID)
+                && (nWID < OWN_ATTR_VALUE_START || nWID > OWN_ATTR_VALUE_END)
+                && rAnys.GetUsrAnyForID(*pSrcProp))
+            rSet.Put(rSet.GetPool()->GetDefaultItem(nWID));
+    }
+
+    for(const SfxItemPropertyMapEntry* pSrcProp : rSrc.getPropertyEntries())
+    {
+        if(pSrcProp->nWID)
+        {
+            uno::Any* pUsrAny = rAnys.GetUsrAnyForID(*pSrcProp);
+            if(pUsrAny)
+            {
+                // search for equivalent entry in pDst
+                const SfxItemPropertyMapEntry* pEntry = pMap->getByName( pSrcProp->aName );
+                if(pEntry)
+                {
+                    // entry found
+                    if(pEntry->nWID >= OWN_ATTR_VALUE_START && pEntry->nWID <= OWN_ATTR_VALUE_END)
+                    {
+                        // special ID in PropertySet, can only be set
+                        // directly at the object
+                        xSet->setPropertyValue( pSrcProp->aName, *pUsrAny);
+                    }
+                    else
+                    {
+                        SvxItemPropertySet_setPropertyValue(pEntry, *pUsrAny, rSet);
+                    }
+                }
+            }
+        }
+    }
+    rAnys.ClearAllUsrAny();
+}
+
+
+void SvxShape::ObtainSettingsFromPropertySet(const SvxItemPropertySet& rPropSet)
+{
+    DBG_TESTSOLARMUTEX();
+    if(HasSdrObject() && maUrsAnys.AreThereOwnUsrAnys())
+    {
+        SfxItemSetFixed<SDRATTR_START, SDRATTR_END> aSet( GetSdrObject()->getSdrModelFromSdrObject().GetItemPool() );
+        Reference< beans::XPropertySet > xShape(this);
+        SvxItemPropertySet_ObtainSettingsFromPropertySet(rPropSet, maUrsAnys, aSet, xShape, &mpPropSet->getPropertyMap() );
+
+        GetSdrObject()->SetMergedItemSetAndBroadcast(aSet);
+
+        GetSdrObject()->ApplyNotPersistAttr( aSet );
+    }
+}
+
+uno::Any SvxShape::GetBitmap( bool bMetaFile /* = false */ ) const
+{
+    DBG_TESTSOLARMUTEX();
+    uno::Any aAny;
+
+    if(!HasSdrObject() || nullptr == GetSdrObject()->getSdrPageFromSdrObject())
+    {
+        return aAny;
+    }
+
+    // tdf#118662 Emulate old behaviour of XclObjComment (see there)
+    const SdrCaptionObj* pSdrCaptionObj(dynamic_cast<SdrCaptionObj*>(GetSdrObject()));
+    if(nullptr != pSdrCaptionObj && pSdrCaptionObj->isSuppressGetBitmap())
+    {
+        return aAny;
+    }
+
+    // tdf#119180 If we do not ask for Metafile and we access a SdrGrafObj,
+    // and content exists and is a Bitmap, take the shortcut.
+    // Do *not* do this for Metafile - as can be seen, requested in that case
+    // is a byte-sequence of a saved WMF format file (see below)
+    if(!bMetaFile)
+    {
+        const SdrGrafObj* pSdrGrafObj(dynamic_cast<SdrGrafObj*>(GetSdrObject()));
+
+        if(nullptr != pSdrGrafObj)
+        {
+            const Graphic& rGraphic(pSdrGrafObj->GetGraphic());
+
+            if(GraphicType::Bitmap == rGraphic.GetType())
+            {
+                Reference< awt::XBitmap > xBmp( rGraphic.GetXGraphic(), UNO_QUERY );
+                aAny <<= xBmp;
+
+                return aAny;
+            }
+        }
+    }
+
+    // tdf#118662 instead of creating an E3dView instance every time to paint
+    // a single SdrObject, use the existing SdrObject::SingleObjectPainter to
+    // use less resources and runtime
+    if(bMetaFile)
+    {
+        ScopedVclPtrInstance< VirtualDevice > pVDev;
+        const tools::Rectangle aBoundRect(GetSdrObject()->GetCurrentBoundRect());
+        GDIMetaFile aMtf;
+
+        pVDev->SetMapMode(MapMode(MapUnit::Map100thMM));
+        pVDev->EnableOutput(false);
+        aMtf.Record(pVDev);
+        GetSdrObject()->SingleObjectPainter(*pVDev);
+        aMtf.Stop();
+        aMtf.WindStart();
+        aMtf.Move(-aBoundRect.Left(), -aBoundRect.Top());
+        aMtf.SetPrefMapMode(MapMode(MapUnit::Map100thMM));
+        aMtf.SetPrefSize(aBoundRect.GetSize());
+
+        SvMemoryStream aDestStrm(65535, 65535);
+
+        ConvertGDIMetaFileToWMF(
+            aMtf,
+            aDestStrm,
+            nullptr,
+            false);
+
+        const uno::Sequence<sal_Int8> aSeq(
+            static_cast< const sal_Int8* >(aDestStrm.GetData()),
+            aDestStrm.GetEndOfData());
+
+        aAny <<= aSeq;
+    }
+    else
+    {
+        drawinglayer::primitive2d::Primitive2DContainer xPrimitives;
+        GetSdrObject()->GetViewContact().getViewIndependentPrimitive2DContainer(xPrimitives);
+
+        if(!xPrimitives.empty())
+        {
+            const drawinglayer::geometry::ViewInformation2D aViewInformation2D;
+            basegfx::B2DRange aRange(
+                xPrimitives.getB2DRange(aViewInformation2D));
+
+            if(!aRange.isEmpty())
+            {
+                const MapUnit aSourceMapUnit(GetSdrObject()->getSdrModelFromSdrObject().GetScaleUnit());
+
+                if(MapUnit::Map100thMM != aSourceMapUnit)
+                {
+                    // tdf#119180 This is UNO API and thus works in 100th_mm,
+                    // so if the MapMode from the used SdrModel is *not* equal
+                    // to Map100thMM we need to embed the primitives to an adapting
+                    // homogen transformation for correct values
+                    const basegfx::B2DHomMatrix aMapTransform(
+                        OutputDevice::LogicToLogic(
+                            MapMode(aSourceMapUnit),
+                            MapMode(MapUnit::Map100thMM)));
+
+                    // Embed primitives to get them in 100th mm
+                    drawinglayer::primitive2d::Primitive2DReference xEmbedRef(
+                        new drawinglayer::primitive2d::TransformPrimitive2D(
+                            aMapTransform,
+                            std::move(xPrimitives)));
+
+                    xPrimitives = drawinglayer::primitive2d::Primitive2DContainer { xEmbedRef };
+
+                    // Update basegfx::B2DRange aRange, too. Here we have the
+                    // choice of transforming the existing value or get newly by
+                    // again using 'xPrimitives.getB2DRange(aViewInformation2D)'
+                    aRange.transform(aMapTransform);
+                }
+
+                const BitmapEx aBmp(
+                    drawinglayer::convertPrimitive2DContainerToBitmapEx(
+                        std::move(xPrimitives),
+                        aRange));
+
+                Graphic aGraph(aBmp);
+
+                aGraph.SetPrefSize(aBmp.GetPrefSize());
+                aGraph.SetPrefMapMode(aBmp.GetPrefMapMode());
+
+                Reference< awt::XBitmap > xBmp( aGraph.GetXGraphic(), UNO_QUERY );
+                aAny <<= xBmp;
+            }
+        }
+    }
+
+    return aAny;
+}
+
+uno::Sequence< uno::Type > SAL_CALL SvxShape::getTypes()
+{
+    if( mpImpl->mpMaster )
+    {
+        return mpImpl->mpMaster->getTypes();
+    }
+    else
+    {
+        return _getTypes();
+    }
+}
+
+
+uno::Sequence< uno::Type > const & SvxShape::_getTypes()
+{
+    switch( mpImpl->mnObjId )
+    {
+    // shapes without text
+    case SdrObjKind::Page:
+    case SdrObjKind::OLEPluginFrame:
+    case SdrObjKind::OLE2Plugin:
+    case SdrObjKind::OLE2Applet:
+    case SdrObjKind::E3D_Cube:
+    case SdrObjKind::E3D_Sphere:
+    case SdrObjKind::E3D_Lathe:
+    case SdrObjKind::E3D_Extrusion:
+    case SdrObjKind::E3D_Polygon:
+    case SdrObjKind::Media:
+    case SdrObjKind::Table:
+        {
+            static uno::Sequence<uno::Type> aTypeSequence{
+                cppu::UnoType<drawing::XShape>::get(),
+                cppu::UnoType<lang::XComponent>::get(),
+                cppu::UnoType<beans::XPropertySet>::get(),
+                cppu::UnoType<beans::XMultiPropertySet>::get(),
+                cppu::UnoType<beans::XPropertyState>::get(),
+                cppu::UnoType<beans::XMultiPropertyStates>::get(),
+                cppu::UnoType<drawing::XGluePointsSupplier>::get(),
+                cppu::UnoType<container::XChild>::get(),
+                cppu::UnoType<lang::XServiceInfo>::get(),
+                cppu::UnoType<lang::XTypeProvider>::get(),
+                cppu::UnoType<lang::XUnoTunnel>::get(),
+                cppu::UnoType<container::XNamed>::get(),
+            };
+
+            return aTypeSequence;
+        }
+    // group shape
+    case SdrObjKind::Group:
+        {
+            static uno::Sequence<uno::Type> aTypeSequence{
+                cppu::UnoType<drawing::XShape>::get(),
+                cppu::UnoType<lang::XComponent>::get(),
+                cppu::UnoType<beans::XPropertySet>::get(),
+                cppu::UnoType<beans::XMultiPropertySet>::get(),
+                cppu::UnoType<beans::XPropertyState>::get(),
+                cppu::UnoType<beans::XMultiPropertyStates>::get(),
+                cppu::UnoType<drawing::XGluePointsSupplier>::get(),
+                cppu::UnoType<container::XChild>::get(),
+                cppu::UnoType<lang::XServiceInfo>::get(),
+                cppu::UnoType<lang::XTypeProvider>::get(),
+                cppu::UnoType<lang::XUnoTunnel>::get(),
+                cppu::UnoType<container::XNamed>::get(),
+                cppu::UnoType<drawing::XShapes>::get(),
+                cppu::UnoType<drawing::XShapeGroup>::get(),
+            };
+
+            return aTypeSequence;
+        }
+    // connector shape
+    case SdrObjKind::Edge:
+        {
+            static uno::Sequence<uno::Type> aTypeSequence{
+                cppu::UnoType<drawing::XShape>::get(),
+                cppu::UnoType<lang::XComponent>::get(),
+                cppu::UnoType<beans::XPropertySet>::get(),
+                cppu::UnoType<beans::XMultiPropertySet>::get(),
+                cppu::UnoType<beans::XPropertyState>::get(),
+                cppu::UnoType<beans::XMultiPropertyStates>::get(),
+                cppu::UnoType<drawing::XGluePointsSupplier>::get(),
+                cppu::UnoType<container::XChild>::get(),
+                cppu::UnoType<lang::XServiceInfo>::get(),
+                cppu::UnoType<lang::XTypeProvider>::get(),
+                cppu::UnoType<lang::XUnoTunnel>::get(),
+                cppu::UnoType<container::XNamed>::get(),
+                cppu::UnoType<drawing::XConnectorShape>::get(),
+                // from SvxUnoTextBase::getTypes()
+                cppu::UnoType<text::XTextAppend>::get(),
+                cppu::UnoType<text::XTextCopy>::get(),
+                cppu::UnoType<container::XEnumerationAccess>::get(),
+                cppu::UnoType<text::XTextRangeMover>::get(),
+            };
+
+            return aTypeSequence;
+        }
+    // control shape
+    case SdrObjKind::UNO:
+        {
+            static uno::Sequence<uno::Type> aTypeSequence{
+                cppu::UnoType<drawing::XShape>::get(),
+                cppu::UnoType<lang::XComponent>::get(),
+                cppu::UnoType<beans::XPropertySet>::get(),
+                cppu::UnoType<beans::XMultiPropertySet>::get(),
+                cppu::UnoType<beans::XPropertyState>::get(),
+                cppu::UnoType<beans::XMultiPropertyStates>::get(),
+                cppu::UnoType<drawing::XGluePointsSupplier>::get(),
+                cppu::UnoType<container::XChild>::get(),
+                cppu::UnoType<lang::XServiceInfo>::get(),
+                cppu::UnoType<lang::XTypeProvider>::get(),
+                cppu::UnoType<lang::XUnoTunnel>::get(),
+                cppu::UnoType<container::XNamed>::get(),
+                cppu::UnoType<drawing::XControlShape>::get(),
+            };
+
+            return aTypeSequence;
+        }
+    // 3d scene shape
+    case SdrObjKind::E3D_Scene:
+        {
+            static uno::Sequence<uno::Type> aTypeSequence{
+                cppu::UnoType<drawing::XShape>::get(),
+                cppu::UnoType<lang::XComponent>::get(),
+                cppu::UnoType<beans::XPropertySet>::get(),
+                cppu::UnoType<beans::XMultiPropertySet>::get(),
+                cppu::UnoType<beans::XPropertyState>::get(),
+                cppu::UnoType<beans::XMultiPropertyStates>::get(),
+                cppu::UnoType<drawing::XGluePointsSupplier>::get(),
+                cppu::UnoType<container::XChild>::get(),
+                cppu::UnoType<lang::XServiceInfo>::get(),
+                cppu::UnoType<lang::XTypeProvider>::get(),
+                cppu::UnoType<lang::XUnoTunnel>::get(),
+                cppu::UnoType<container::XNamed>::get(),
+                cppu::UnoType<drawing::XShapes>::get(),
+            };
+
+            return aTypeSequence;
+        }
+    case SdrObjKind::CustomShape:
+        {
+            static uno::Sequence<uno::Type> aTypeSequence{
+                cppu::UnoType<drawing::XShape>::get(),
+                cppu::UnoType<lang::XComponent>::get(),
+                cppu::UnoType<beans::XPropertySet>::get(),
+                cppu::UnoType<beans::XMultiPropertySet>::get(),
+                cppu::UnoType<beans::XPropertyState>::get(),
+                cppu::UnoType<beans::XMultiPropertyStates>::get(),
+                cppu::UnoType<drawing::XGluePointsSupplier>::get(),
+                cppu::UnoType<container::XChild>::get(),
+                cppu::UnoType<lang::XServiceInfo>::get(),
+                cppu::UnoType<lang::XTypeProvider>::get(),
+                cppu::UnoType<lang::XUnoTunnel>::get(),
+                cppu::UnoType<container::XNamed>::get(),
+                // from SvxUnoTextBase::getTypes()
+                cppu::UnoType<text::XText>::get(),
+                cppu::UnoType<container::XEnumerationAccess>::get(),
+                cppu::UnoType<text::XTextRangeMover>::get(),
+                cppu::UnoType<drawing::XEnhancedCustomShapeDefaulter>::get(),
+            };
+
+            return aTypeSequence;
+        }
+    // shapes with text
+    case SdrObjKind::Rectangle:
+    case SdrObjKind::CircleOrEllipse:
+    case SdrObjKind::Measure:
+    case SdrObjKind::Line:
+    case SdrObjKind::Polygon:
+    case SdrObjKind::PolyLine:
+    case SdrObjKind::PathLine:
+    case SdrObjKind::PathFill:
+    case SdrObjKind::FreehandLine:
+    case SdrObjKind::FreehandFill:
+    case SdrObjKind::PathPoly:
+    case SdrObjKind::PathPolyLine:
+    case SdrObjKind::Graphic:
+    case SdrObjKind::Text:
+    case SdrObjKind::Caption:
+    case SdrObjKind::OLE2: // #i118485# Moved to shapes with text
+    default:
+        {
+            static uno::Sequence<uno::Type> aTypeSequence{
+                cppu::UnoType<drawing::XShape>::get(),
+                cppu::UnoType<lang::XComponent>::get(),
+                cppu::UnoType<beans::XPropertySet>::get(),
+                cppu::UnoType<beans::XMultiPropertySet>::get(),
+                cppu::UnoType<beans::XPropertyState>::get(),
+                cppu::UnoType<beans::XMultiPropertyStates>::get(),
+                cppu::UnoType<drawing::XGluePointsSupplier>::get(),
+                cppu::UnoType<container::XChild>::get(),
+                cppu::UnoType<lang::XServiceInfo>::get(),
+                cppu::UnoType<lang::XTypeProvider>::get(),
+                cppu::UnoType<lang::XUnoTunnel>::get(),
+                cppu::UnoType<container::XNamed>::get(),
+                // from SvxUnoTextBase::getTypes()
+                cppu::UnoType<text::XTextAppend>::get(),
+                cppu::UnoType<text::XTextCopy>::get(),
+                cppu::UnoType<container::XEnumerationAccess>::get(),
+                cppu::UnoType<text::XTextRangeMover>::get(),
+            };
+
+            return aTypeSequence;
+        }
+    }
+}
+
+
+uno::Sequence< sal_Int8 > SAL_CALL SvxShape::getImplementationId()
+{
+    return css::uno::Sequence<sal_Int8>();
+}
+
+void SvxShape::Notify( SfxBroadcaster&, const SfxHint& rHint ) noexcept
+{
+    DBG_TESTSOLARMUTEX();
+
+    // do cheap checks first, this method is hot
+    if (rHint.GetId() != SfxHintId::ThisIsAnSdrHint)
+        return;
+    SdrObject* pSdrObject(mpSdrObjectWeakReference.get());
+    if( !pSdrObject )
+        return;
+    const SdrHint* pSdrHint = static_cast<const SdrHint*>(&rHint);
+    // #i55919# SdrHintKind::ObjectChange is only interesting if it's for this object
+    if ((pSdrHint->GetKind() != SdrHintKind::ModelCleared) &&
+         (pSdrHint->GetKind() != SdrHintKind::ObjectChange || pSdrHint->GetObject() != pSdrObject ))
+        return;
+
+    uno::Reference< uno::XInterface > xSelf( pSdrObject->getWeakUnoShape() );
+    if( !xSelf.is() )
+    {
+        EndListening(pSdrObject->getSdrModelFromSdrObject());
+        mpSdrObjectWeakReference.reset(nullptr);
+        return;
+    }
+
+    bool bClearMe = false;
+
+    switch( pSdrHint->GetKind() )
+    {
+        case SdrHintKind::ObjectChange:
+        {
+            updateShapeKind();
+            break;
+        }
+        case SdrHintKind::ModelCleared:
+        {
+            bClearMe = true;
+            break;
+        }
+        default:
+            break;
+    };
+
+    if( !bClearMe )
+        return;
+
+    if(!HasSdrObjectOwnership())
+    {
+        if(nullptr != pSdrObject)
+        {
+            EndListening(pSdrObject->getSdrModelFromSdrObject());
+            pSdrObject->setUnoShape(nullptr);
+        }
+
+        mpSdrObjectWeakReference.reset(nullptr);
+
+        // SdrModel *is* going down, try to Free SdrObject even
+        // when !HasSdrObjectOwnership
+        if(nullptr != pSdrObject && !pSdrObject->IsInserted())
+        {
+            SdrObject::Free(pSdrObject);
+        }
+    }
+
+    if(!mpImpl->mbDisposing)
+    {
+        dispose();
+    }
+}
+
+// XShape
+
+
+// The "*LogicRectHack" functions also existed in sch, and those
+// duplicate symbols cause Bad Things To Happen (TM)  #i9462#.
+// Prefixing with 'svx' and marking static to make sure name collisions
+// do not occur.
+
+static bool svx_needLogicRectHack( SdrObject const * pObj )
+{
+    if( pObj->GetObjInventor() == SdrInventor::Default)
+    {
+        switch(pObj->GetObjIdentifier())
+        {
+        case SdrObjKind::Group:
+        case SdrObjKind::Line:
+        case SdrObjKind::Polygon:
+        case SdrObjKind::PolyLine:
+        case SdrObjKind::PathLine:
+        case SdrObjKind::PathFill:
+        case SdrObjKind::FreehandLine:
+        case SdrObjKind::FreehandFill:
+        case SdrObjKind::SplineLine:
+        case SdrObjKind::SplineFill:
+        case SdrObjKind::Edge:
+        case SdrObjKind::PathPoly:
+        case SdrObjKind::PathPolyLine:
+        case SdrObjKind::Measure:
+            return true;
+        default:
+            break;
+        }
+    }
+    return false;
+}
+
+
+static tools::Rectangle svx_getLogicRectHack( SdrObject const * pObj )
+{
+    if(svx_needLogicRectHack(pObj))
+    {
+        return pObj->GetSnapRect();
+    }
+    else
+    {
+        return pObj->GetLogicRect();
+    }
+}
+
+
+static void svx_setLogicRectHack( SdrObject* pObj, const tools::Rectangle& rRect )
+{
+    if(svx_needLogicRectHack(pObj))
+    {
+        pObj->SetSnapRect( rRect );
+    }
+    else
+    {
+        pObj->SetLogicRect( rRect );
+    }
+}
+
+
+awt::Point SAL_CALL SvxShape::getPosition()
+{
+    ::SolarMutexGuard aGuard;
+
+    if(HasSdrObject())
+    {
+        tools::Rectangle aRect( svx_getLogicRectHack(GetSdrObject()) );
+        Point aPt( aRect.Left(), aRect.Top() );
+
+        // Position is relative to anchor, so recalc to absolute position
+        if( GetSdrObject()->getSdrModelFromSdrObject().IsWriter() )
+            aPt -= GetSdrObject()->GetAnchorPos();
+
+        ForceMetricTo100th_mm(aPt);
+        return css::awt::Point( aPt.X(), aPt.Y() );
+    }
+    else
+    {
+        return maPosition;
+    }
+}
+
+
+void SAL_CALL SvxShape::setPosition( const awt::Point& Position )
+{
+    ::SolarMutexGuard aGuard;
+
+    if(HasSdrObject())
+    {
+        // do NOT move 3D objects, this would change the homogen
+        // transformation matrix
+        if(dynamic_cast<const E3dCompoundObject* >(GetSdrObject()) == nullptr)
+        {
+            tools::Rectangle aRect( svx_getLogicRectHack(GetSdrObject()) );
+            Point aLocalPos( Position.X, Position.Y );
+            ForceMetricToItemPoolMetric(aLocalPos);
+
+            // Position is absolute, so recalc to position relative to anchor
+            if( GetSdrObject()->getSdrModelFromSdrObject().IsWriter() )
+                aLocalPos += GetSdrObject()->GetAnchorPos();
+
+            tools::Long nDX = aLocalPos.X() - aRect.Left();
+            tools::Long nDY = aLocalPos.Y() - aRect.Top();
+
+            GetSdrObject()->Move( Size( nDX, nDY ) );
+            GetSdrObject()->getSdrModelFromSdrObject().SetChanged();
+        }
+    }
+
+    maPosition = Position;
+}
+
+
+awt::Size SAL_CALL SvxShape::getSize()
+{
+    ::SolarMutexGuard aGuard;
+
+    if(HasSdrObject())
+    {
+        tools::Rectangle aRect( svx_getLogicRectHack(GetSdrObject()) );
+        Size aObjSize( aRect.getWidth(), aRect.getHeight() );
+        ForceMetricTo100th_mm(aObjSize);
+        return css::awt::Size( aObjSize.getWidth(), aObjSize.getHeight() );
+    }
+    else
+        return maSize;
+}
+
+
+void SAL_CALL SvxShape::setSize( const awt::Size& rSize )
+{
+    ::SolarMutexGuard aGuard;
+
+    if(HasSdrObject())
+    {
+        tools::Rectangle aRect( svx_getLogicRectHack(GetSdrObject()) );
+        Size aLocalSize( rSize.Width, rSize.Height );
+        ForceMetricToItemPoolMetric(aLocalSize);
+
+        if(GetSdrObject()->GetObjInventor() == SdrInventor::Default && GetSdrObject()->GetObjIdentifier() == SdrObjKind::Measure )
+        {
+            Fraction aWdt(aLocalSize.Width(),aRect.Right()-aRect.Left());
+            Fraction aHgt(aLocalSize.Height(),aRect.Bottom()-aRect.Top());
+            Point aPt = GetSdrObject()->GetSnapRect().TopLeft();
+            GetSdrObject()->Resize(aPt,aWdt,aHgt);
+        }
+        else
+        {
+            //aRect.SetSize(aLocalSize); // this call subtract 1 // https://bz.apache.org/ooo/show_bug.cgi?id=83193
+            if ( !aLocalSize.Width() )
+            {
+                aRect.SetWidthEmpty();
+            }
+            else
+                aRect.setWidth(aLocalSize.Width());
+            if ( !aLocalSize.Height() )
+            {
+                aRect.SetHeightEmpty();
+            }
+            else
+                aRect.setHeight(aLocalSize.Height());
+
+            svx_setLogicRectHack( GetSdrObject(), aRect );
+        }
+
+        GetSdrObject()->getSdrModelFromSdrObject().SetChanged();
+    }
+    maSize = rSize;
+}
+
+
+// XNamed
+OUString SAL_CALL SvxShape::getName(  )
+{
+    ::SolarMutexGuard aGuard;
+    if( HasSdrObject() )
+    {
+        return GetSdrObject()->GetName();
+    }
+    else
+    {
+        return maShapeName;
+    }
+}
+
+
+void SAL_CALL SvxShape::setName( const OUString& aName )
+{
+    ::SolarMutexGuard aGuard;
+    if( HasSdrObject() )
+    {
+        GetSdrObject()->SetName( aName );
+    }
+    else
+    {
+        maShapeName = aName;
+    }
+}
+
+// XShapeDescriptor
+
+
+OUString SAL_CALL SvxShape::getShapeType()
+{
+    if( !maShapeType.getLength() )
+        return UHashMap::getNameFromId( mpImpl->mnObjId );
+    else
+        return maShapeType;
+}
+
+// XComponent
+
+
+void SAL_CALL SvxShape::dispose()
+{
+    ::SolarMutexGuard aGuard;
+
+    if( mpImpl->mbDisposing )
+        return; // caught a recursion
+
+    mpImpl->mbDisposing = true;
+
+    lang::EventObject aEvt;
+    aEvt.Source = *static_cast<OWeakAggObject*>(this);
+    mpImpl->maDisposeListeners.disposeAndClear(aEvt);
+    mpImpl->maPropertyNotifier.disposing();
+
+    if ( !HasSdrObject() )
+        return;
+
+    SdrObject* pObject = GetSdrObject();
+
+    EndListening( pObject->getSdrModelFromSdrObject() );
+    bool bFreeSdrObject = false;
+
+    if ( pObject->IsInserted() && pObject->getSdrPageFromSdrObject() )
+    {
+        SdrPage* pPage = pObject->getSdrPageFromSdrObject();
+        // delete the SdrObject from the page
+        const size_t nCount = pPage->GetObjCount();
+        for ( size_t nNum = 0; nNum < nCount; ++nNum )
+        {
+            if ( pPage->GetObj( nNum ) == pObject )
+            {
+                OSL_VERIFY( pPage->RemoveObject( nNum ) == pObject );
+                if (HasSdrObjectOwnership())
+                {
+                    bFreeSdrObject = true;
+                }
+                break;
+            }
+        }
+    }
+
+    pObject->setUnoShape(nullptr);
+
+    if ( bFreeSdrObject )
+    {
+        // in case we have the ownership of the SdrObject, a Free
+        // would do nothing. So ensure the ownership is reset.
+        mpImpl->mbHasSdrObjectOwnership = false;
+        SdrObject::Free( pObject );
+    }
+}
+
+
+void SAL_CALL SvxShape::addEventListener( const Reference< lang::XEventListener >& xListener )
+{
+    mpImpl->maDisposeListeners.addInterface(xListener);
+}
+
+
+void SAL_CALL SvxShape::removeEventListener( const Reference< lang::XEventListener >& aListener )
+{
+   mpImpl->maDisposeListeners.removeInterface(aListener);
+}
+
+// XPropertySet
+
+
+Reference< beans::XPropertySetInfo > SAL_CALL
+    SvxShape::getPropertySetInfo()
+{
+    if( mpImpl->mpMaster )
+    {
+        return mpImpl->mpMaster->getPropertySetInfo();
+    }
+    else
+    {
+        return _getPropertySetInfo();
+    }
+}
+
+Reference< beans::XPropertySetInfo > const &
+    SvxShape::_getPropertySetInfo()
+{
+    return mpPropSet->getPropertySetInfo();
+}
+
+
+void SAL_CALL SvxShape::addPropertyChangeListener( const OUString& _propertyName, const Reference< beans::XPropertyChangeListener >& _listener  )
+{
+    ::osl::MutexGuard aGuard( m_aMutex );
+    mpImpl->maPropertyNotifier.addPropertyChangeListener( _propertyName, _listener );
+}
+
+
+void SAL_CALL SvxShape::removePropertyChangeListener( const OUString& _propertyName, const Reference< beans::XPropertyChangeListener >& _listener  )
+{
+    ::osl::MutexGuard aGuard( m_aMutex );
+    mpImpl->maPropertyNotifier.removePropertyChangeListener( _propertyName, _listener );
+}
+
+
+void SAL_CALL SvxShape::addVetoableChangeListener( const OUString& , const Reference< beans::XVetoableChangeListener >&  )
+{
+    OSL_FAIL( "SvxShape::addVetoableChangeListener: don't have any vetoable properties, so why ...?" );
+}
+
+
+void SAL_CALL SvxShape::removeVetoableChangeListener( const OUString& , const Reference< beans::XVetoableChangeListener >&  )
+{
+    OSL_FAIL( "SvxShape::removeVetoableChangeListener: don't have any vetoable properties, so why ...?" );
+}
+
+
+bool SvxShape::SetFillAttribute( sal_uInt16 nWID, const OUString& rName )
+{
+    if(HasSdrObject())
+    {
+        SfxItemSet aSet( GetSdrObject()->getSdrModelFromSdrObject().GetItemPool(), nWID, nWID );
+
+        if( SetFillAttribute( nWID, rName, aSet, &GetSdrObject()->getSdrModelFromSdrObject() ) )
+        {
+            //GetSdrObject()->SetItemSetAndBroadcast(aSet);
+            GetSdrObject()->SetMergedItemSetAndBroadcast(aSet);
+
+            return true;
+        }
+    }
+
+    return false;
+}
+
+
+bool SvxShape::SetFillAttribute( sal_uInt16 nWID, const OUString& rName, SfxItemSet& rSet, SdrModel const * pModel )
+{
+    // check if an item with the given name and which id is inside the models
+    // pool or the stylesheet pool, if found it's put in the itemset
+    if( !SetFillAttribute( nWID, rName, rSet ) )
+    {
+        // we did not find such item in one of the pools, so we check
+        // the property lists that are loaded for the model for items
+        // that support such.
+        OUString aStrName = SvxUnogetInternalNameForItem(nWID, rName);
+
+        switch( nWID )
+        {
+        case XATTR_FILLBITMAP:
+        {
+            XBitmapListRef pBitmapList = pModel->GetBitmapList();
+
+            if( !pBitmapList.is() )
+                return false;
+
+            tools::Long nPos = pBitmapList->GetIndex(aStrName);
+            if( nPos == -1 )
+                return false;
+
+            const XBitmapEntry* pEntry = pBitmapList->GetBitmap(nPos);
+            XFillBitmapItem aBmpItem(rName, pEntry->GetGraphicObject());
+            rSet.Put(aBmpItem);
+            break;
+        }
+        case XATTR_FILLGRADIENT:
+        {
+            XGradientListRef pGradientList = pModel->GetGradientList();
+
+            if( !pGradientList.is() )
+                return false;
+
+            tools::Long nPos = pGradientList->GetIndex(aStrName);
+            if( nPos == -1 )
+                return false;
+
+            const XGradientEntry* pEntry = pGradientList->GetGradient(nPos);
+            XFillGradientItem aGrdItem(rName, pEntry->GetGradient());
+            rSet.Put( aGrdItem );
+            break;
+        }
+        case XATTR_FILLHATCH:
+        {
+            XHatchListRef pHatchList = pModel->GetHatchList();
+
+            if( !pHatchList.is() )
+                return false;
+
+            tools::Long nPos = pHatchList->GetIndex(aStrName);
+            if( nPos == -1 )
+                return false;
+
+            const XHatchEntry* pEntry = pHatchList->GetHatch( nPos );
+            XFillHatchItem aHatchItem(rName, pEntry->GetHatch());
+            rSet.Put( aHatchItem );
+            break;
+        }
+        case XATTR_LINEEND:
+        case XATTR_LINESTART:
+        {
+            XLineEndListRef pLineEndList = pModel->GetLineEndList();
+
+            if( !pLineEndList.is() )
+                return false;
+
+            tools::Long nPos = pLineEndList->GetIndex(aStrName);
+            if( nPos == -1 )
+                return false;
+
+            const XLineEndEntry* pEntry = pLineEndList->GetLineEnd(nPos);
+            if( sal_uInt16(XATTR_LINEEND) == nWID )
+            {
+                XLineEndItem aLEItem(rName, pEntry->GetLineEnd());
+                rSet.Put( aLEItem );
+            }
+            else
+            {
+                XLineStartItem aLSItem(rName, pEntry->GetLineEnd());
+                rSet.Put( aLSItem );
+            }
+
+            break;
+        }
+        case XATTR_LINEDASH:
+        {
+            XDashListRef pDashList = pModel->GetDashList();
+
+            if( !pDashList.is() )
+                return false;
+
+            tools::Long nPos = pDashList->GetIndex(aStrName);
+            if( nPos == -1 )
+                return false;
+
+            const XDashEntry* pEntry = pDashList->GetDash(nPos);
+            XLineDashItem aDashItem(rName, pEntry->GetDash());
+            rSet.Put( aDashItem );
+            break;
+        }
+        default:
+            return false;
+        }
+    }
+
+    return true;
+}
+
+
+bool SvxShape::SetFillAttribute( sal_uInt16 nWID, const OUString& rName, SfxItemSet& rSet )
+{
+    OUString aName = SvxUnogetInternalNameForItem(nWID, rName);
+
+    if (aName.isEmpty())
+    {
+        switch( nWID )
+        {
+        case XATTR_LINEEND:
+        case XATTR_LINESTART:
+            {
+                const basegfx::B2DPolyPolygon aEmptyPoly;
+                if( nWID == sal_uInt16(XATTR_LINEEND) )
+                    rSet.Put( XLineEndItem( "", aEmptyPoly ) );
+                else
+                    rSet.Put( XLineStartItem( "", aEmptyPoly ) );
+
+                return true;
+            }
+        case XATTR_FILLFLOATTRANSPARENCE:
+            {
+                // #85953# Set a disabled XFillFloatTransparenceItem
+                rSet.Put(XFillFloatTransparenceItem());
+
+                return true;
+            }
+        }
+
+        return false;
+    }
+
+    for (const SfxPoolItem* p : rSet.GetPool()->GetItemSurrogates(nWID))
+    {
+        const NameOrIndex* pItem = static_cast<const NameOrIndex*>(p);
+        if( pItem->GetName() == aName )
+        {
+            rSet.Put( *pItem );
+            return true;
+        }
+    }
+
+    return false;
+}
+
+
+void SAL_CALL SvxShape::setPropertyValue( const OUString& rPropertyName, const uno::Any& rVal )
+{
+    if( mpImpl->mpMaster )
+    {
+        mpImpl->mpMaster->setPropertyValue( rPropertyName, rVal );
+    }
+    else
+    {
+        _setPropertyValue( rPropertyName, rVal );
+    }
+}
+
+void SvxShape::_setPropertyValue( const OUString& rPropertyName, const uno::Any& rVal )
+{
+    ::SolarMutexGuard aGuard;
+
+    const SfxItemPropertyMapEntry* pMap = mpPropSet->getPropertyMapEntry(rPropertyName);
+
+    if (!HasSdrObject())
+    {
+        // Since we have no actual sdr object right now, remember all
+        // properties in a list. These properties will be set when the sdr
+        // object is created.
+
+        if (pMap && pMap->nWID)
+        {
+            // FIXME: We should throw a UnknownPropertyException here.
+            //        But since this class is aggregated from classes that
+            //        support additional properties that we don't know here we
+            //        silently store *all* properties, even if they may be not
+            //        supported after creation.
+            SvxItemPropertySet::setPropertyValue( pMap, rVal, maUrsAnys );
+        }
+
+        return;
+    }
+
+    if (rPropertyName == "HandlePathObjScale")
+    {
+        auto pPathObj = dynamic_cast<SdrPathObj*>(GetSdrObject());
+        if (pPathObj)
+        {
+            bool bHandleScale{};
+            if (rVal >>= bHandleScale)
+            {
+                pPathObj->SetHandleScale(bHandleScale);
+            }
+        }
+        return;
+    }
+
+    if (!pMap)
+    {
+        // reduce log noise by ignoring two properties that higher level code queries for on all objects
+        SAL_WARN_IF(rPropertyName != "FromWordArt" && rPropertyName != "GraphicColorMode",
+            "svx.uno", "Unknown Property: " << rPropertyName);
+        throw beans::UnknownPropertyException( rPropertyName, static_cast<cppu::OWeakObject*>(this));
+    }
+
+    if ((pMap->nFlags & beans::PropertyAttribute::READONLY) != 0)
+        throw beans::PropertyVetoException(
+            "Readonly property can't be set: " + rPropertyName,
+            uno::Reference<drawing::XShape>(this));
+
+    GetSdrObject()->getSdrModelFromSdrObject().SetChanged();
+
+    if (setPropertyValueImpl(rPropertyName, pMap, rVal))
+        return;
+
+    DBG_ASSERT( pMap->nWID == SDRATTR_TEXTDIRECTION || pMap->nWID < SDRATTR_NOTPERSIST_FIRST || pMap->nWID > SDRATTR_NOTPERSIST_LAST, "Not persist item not handled!" );
+    DBG_ASSERT( pMap->nWID < OWN_ATTR_VALUE_START || pMap->nWID > OWN_ATTR_VALUE_END, "Not item property not handled!" );
+
+    bool bIsNotPersist = pMap->nWID >= SDRATTR_NOTPERSIST_FIRST && pMap->nWID <= SDRATTR_NOTPERSIST_LAST && pMap->nWID != SDRATTR_TEXTDIRECTION;
+
+    if( pMap->nWID == SDRATTR_CORNER_RADIUS )
+    {
+        sal_Int32 nCornerRadius = 0;
+        if( !(rVal >>= nCornerRadius) || (nCornerRadius < 0) || (nCornerRadius > 5000000))
+            throw IllegalArgumentException();
+    }
+
+    std::optional<SfxItemSet> xLocalSet;
+    SfxItemSet* pSet;
+    if( mbIsMultiPropertyCall && !bIsNotPersist )
+    {
+        if( !mpImpl->mxItemSet )
+        {
+            mpImpl->mxItemSet.emplace( GetSdrObject()->GetProperties().CreateObjectSpecificItemSet( GetSdrObject()->getSdrModelFromSdrObject().GetItemPool() ) );
+        }
+        pSet = &*mpImpl->mxItemSet;
+    }
+    else
+    {
+        xLocalSet.emplace( GetSdrObject()->getSdrModelFromSdrObject().GetItemPool(), pMap->nWID, pMap->nWID);
+        pSet = &*xLocalSet;
+    }
+
+    if( pSet->GetItemState( pMap->nWID ) != SfxItemState::SET )
+        pSet->Put(GetSdrObject()->GetMergedItem(pMap->nWID));
+
+    if( !SvxUnoTextRangeBase::SetPropertyValueHelper( pMap, rVal, *pSet ))
+    {
+        if( pSet->GetItemState( pMap->nWID ) != SfxItemState::SET )
+        {
+            if(bIsNotPersist)
+            {
+                // not-persistent attribute, get those extra
+                GetSdrObject()->TakeNotPersistAttr(*pSet);
+            }
+        }
+
+        if( pSet->GetItemState( pMap->nWID ) != SfxItemState::SET )
+        {
+            // get default from ItemPool
+            if(SfxItemPool::IsWhich(pMap->nWID))
+                pSet->Put(GetSdrObject()->getSdrModelFromSdrObject().GetItemPool().GetDefaultItem(pMap->nWID));
+        }
+
+        if( pSet->GetItemState( pMap->nWID ) == SfxItemState::SET )
+        {
+            SvxItemPropertySet_setPropertyValue( pMap, rVal, *pSet );
+        }
+    }
+
+    if(bIsNotPersist)
+    {
+        // set not-persistent attribute extra
+        GetSdrObject()->ApplyNotPersistAttr( *pSet );
+    }
+    else
+    {
+        // if we have a XMultiProperty call then the item set
+        // will be set in setPropertyValues later
+        if( !mbIsMultiPropertyCall )
+            GetSdrObject()->SetMergedItemSetAndBroadcast( *pSet );
+    }
+}
+
+
+uno::Any SAL_CALL SvxShape::getPropertyValue( const OUString& PropertyName )
+{
+    if ( mpImpl->mpMaster )
+        return mpImpl->mpMaster->getPropertyValue( PropertyName );
+    else
+        return _getPropertyValue( PropertyName );
+}
+
+
+uno::Any SvxShape::_getPropertyValue( const OUString& PropertyName )
+{
+    ::SolarMutexGuard aGuard;
+
+    const SfxItemPropertyMapEntry* pMap = mpPropSet->getPropertyMapEntry(PropertyName);
+
+    uno::Any aAny;
+    if(HasSdrObject())
+    {
+        if(pMap == nullptr )
+            throw beans::UnknownPropertyException( PropertyName, static_cast<cppu::OWeakObject*>(this));
+
+        if( !getPropertyValueImpl( PropertyName, pMap, aAny ) )
+        {
+            DBG_ASSERT( pMap->nWID == SDRATTR_TEXTDIRECTION || (pMap->nWID < SDRATTR_NOTPERSIST_FIRST || pMap->nWID > SDRATTR_NOTPERSIST_LAST), "Not persist item not handled!" );
+            DBG_ASSERT( pMap->nWID < OWN_ATTR_VALUE_START || pMap->nWID > OWN_ATTR_VALUE_END, "Not item property not handled!" );
+
+            SfxItemSet aSet( GetSdrObject()->getSdrModelFromSdrObject().GetItemPool(), pMap->nWID, pMap->nWID );
+            aSet.Put(GetSdrObject()->GetMergedItem(pMap->nWID));
+
+            if(SvxUnoTextRangeBase::GetPropertyValueHelper(  aSet, pMap, aAny ))
+                return aAny;
+
+            if(!aSet.Count())
+            {
+                if(pMap->nWID >= SDRATTR_NOTPERSIST_FIRST && pMap->nWID <= SDRATTR_NOTPERSIST_LAST)
+                {
+                    // not-persistent attribute, get those extra
+                    GetSdrObject()->TakeNotPersistAttr(aSet);
+                }
+            }
+
+            if(!aSet.Count())
+            {
+                // get default from ItemPool
+                if(SfxItemPool::IsWhich(pMap->nWID))
+                    aSet.Put(GetSdrObject()->getSdrModelFromSdrObject().GetItemPool().GetDefaultItem(pMap->nWID));
+            }
+
+            if(aSet.Count())
+                aAny = GetAnyForItem( aSet, pMap );
+        }
+    }
+    else
+    {
+
+// Fixme: we should return default values for OWN_ATTR !
+
+        if(pMap && pMap->nWID)
+//      FixMe: see setPropertyValue
+            aAny = mpPropSet->getPropertyValue( pMap, maUrsAnys );
+
+    }
+    return aAny;
+}
+
+
+// XMultiPropertySet
+void SAL_CALL SvxShape::setPropertyValues( const css::uno::Sequence< OUString >& aPropertyNames, const css::uno::Sequence< css::uno::Any >& aValues )
+{
+    ::SolarMutexGuard aSolarGuard;
+
+    const sal_Int32 nCount = aPropertyNames.getLength();
+    const OUString* pNames = aPropertyNames.getConstArray();
+
+    const uno::Any* pValues = aValues.getConstArray();
+
+    // make sure mbIsMultiPropertyCall and mpImpl->mpItemSet are
+    // reset even when an exception is thrown
+    const ::comphelper::ScopeGuard aGuard( [this] () { return this->endSetPropertyValues(); } );
+
+    mbIsMultiPropertyCall = true;
+
+    if( mpImpl->mpMaster )
+    {
+        for( sal_Int32 nIdx = 0; nIdx < nCount; nIdx++, pNames++, pValues++ )
+        {
+            try
+            {
+                setPropertyValue( *pNames, *pValues );
+            }
+            catch (beans::UnknownPropertyException&)
+            {
+                DBG_UNHANDLED_EXCEPTION("svx");
+            }
+            catch (uno::Exception&)
+            {
+                DBG_UNHANDLED_EXCEPTION("svx");
+            }
+        }
+    }
+    else
+    {
+        uno::Reference< beans::XPropertySet > xSet;
+        queryInterface( cppu::UnoType<beans::XPropertySet>::get()) >>= xSet;
+
+        for( sal_Int32 nIdx = 0; nIdx < nCount; nIdx++, pNames++, pValues++ )
+        {
+            try
+            {
+                xSet->setPropertyValue( *pNames, *pValues );
+            }
+            catch (beans::UnknownPropertyException&)
+            {
+                DBG_UNHANDLED_EXCEPTION("svx");
+            }
+            catch (uno::Exception&)
+            {
+                DBG_UNHANDLED_EXCEPTION("svx");
+            }
+        }
+    }
+
+    if( mpImpl->mxItemSet && HasSdrObject() )
+        GetSdrObject()->SetMergedItemSetAndBroadcast( *mpImpl->mxItemSet );
+}
+
+
+void SvxShape::endSetPropertyValues()
+{
+    mbIsMultiPropertyCall = false;
+    mpImpl->mxItemSet.reset();
+}
+
+
+css::uno::Sequence< css::uno::Any > SAL_CALL SvxShape::getPropertyValues( const css::uno::Sequence< OUString >& aPropertyNames )
+{
+    const sal_Int32 nCount = aPropertyNames.getLength();
+    const OUString* pNames = aPropertyNames.getConstArray();
+
+    uno::Sequence< uno::Any > aRet( nCount );
+    uno::Any* pValue = aRet.getArray();
+
+    if( mpImpl->mpMaster )
+    {
+        for( sal_Int32 nIdx = 0; nIdx < nCount; nIdx++, pValue++, pNames++ )
+        {
+            try
+            {
+                *pValue = getPropertyValue( *pNames );
+            }
+            catch( uno::Exception& )
+            {
+                OSL_FAIL( "SvxShape::getPropertyValues, unknown property asked" );
+            }
+        }
+    }
+    else
+    {
+        uno::Reference< beans::XPropertySet > xSet;
+        queryInterface( cppu::UnoType<beans::XPropertySet>::get()) >>= xSet;
+
+        for( sal_Int32 nIdx = 0; nIdx < nCount; nIdx++, pValue++, pNames++ )
+        {
+            try
+            {
+                *pValue = xSet->getPropertyValue( *pNames );
+            }
+            catch( uno::Exception& )
+            {
+                OSL_FAIL( "SvxShape::getPropertyValues, unknown property asked" );
+            }
+        }
+    }
+
+    return aRet;
+}
+
+void SAL_CALL SvxShape::addPropertiesChangeListener( const css::uno::Sequence< OUString >& , const css::uno::Reference< css::beans::XPropertiesChangeListener >&  )
+{
+}
+
+void SAL_CALL SvxShape::removePropertiesChangeListener( const css::uno::Reference< css::beans::XPropertiesChangeListener >&  )
+{
+}
+
+void SAL_CALL SvxShape::firePropertiesChangeEvent( const css::uno::Sequence< OUString >& , const css::uno::Reference< css::beans::XPropertiesChangeListener >&  )
+{
+}
+
+
+uno::Any SvxShape::GetAnyForItem( SfxItemSet const & aSet, const SfxItemPropertyMapEntry* pMap ) const
+{
+    DBG_TESTSOLARMUTEX();
+    uno::Any aAny;
+
+    switch(pMap->nWID)
+    {
+    case SDRATTR_CIRCSTARTANGLE:
+    {
+        if(const SdrAngleItem* pPoolItem = aSet.GetItemIfSet(SDRATTR_CIRCSTARTANGLE,false))
+        {
+            Degree100 nAngle = pPoolItem->GetValue();
+            aAny <<= nAngle.get();
+        }
+        break;
+    }
+
+    case SDRATTR_CIRCENDANGLE:
+    {
+        if (const SdrAngleItem* pPoolItem = aSet.GetItemIfSet(SDRATTR_CIRCENDANGLE,false))
+        {
+            Degree100 nAngle = pPoolItem->GetValue();
+            aAny <<= nAngle.get();
+        }
+        break;
+    }
+
+    case SDRATTR_CIRCKIND:
+    {
+        if( GetSdrObject()->GetObjInventor() == SdrInventor::Default)
+        {
+            drawing::CircleKind eKind;
+            switch(GetSdrObject()->GetObjIdentifier())
+            {
+            case SdrObjKind::CircleOrEllipse:          // circle, ellipse
+                eKind = drawing::CircleKind_FULL;
+                break;
+            case SdrObjKind::CircleCut:          // segment of circle
+                eKind = drawing::CircleKind_CUT;
+                break;
+            case SdrObjKind::CircleArc:          // arc of circle
+                eKind = drawing::CircleKind_ARC;
+                break;
+            case SdrObjKind::CircleSection:          // sector
+                eKind = drawing::CircleKind_SECTION;
+                break;
+            default:
+                break;
+            }
+            aAny <<= eKind;
+        }
+        break;
+    }
+    default:
+    {
+        // get value from ItemSet
+        aAny = SvxItemPropertySet_getPropertyValue( pMap, aSet );
+
+        if( pMap->aType != aAny.getValueType() )
+        {
+            // since the sfx uint16 item now exports a sal_Int32, we may have to fix this here
+            if( ( pMap->aType == ::cppu::UnoType<sal_Int16>::get()) && aAny.getValueType() == ::cppu::UnoType<sal_Int32>::get() )
+            {
+                sal_Int32 nValue = 0;
+                aAny >>= nValue;
+                aAny <<= static_cast<sal_Int16>(nValue);
+            }
+            else
+            {
+                OSL_FAIL("SvxShape::GetAnyForItem() Returnvalue has wrong Type!" );
+            }
+        }
+
+    }
+    }
+
+    return aAny;
+}
+
+
+// XPropertyState
+beans::PropertyState SAL_CALL SvxShape::getPropertyState( const OUString& PropertyName )
+{
+    if( mpImpl->mpMaster )
+    {
+        return mpImpl->mpMaster->getPropertyState( PropertyName );
+    }
+    else
+    {
+        return _getPropertyState( PropertyName );
+    }
+}
+
+beans::PropertyState SvxShape::_getPropertyState( const OUString& PropertyName )
+{
+    ::SolarMutexGuard aGuard;
+
+    const SfxItemPropertyMapEntry* pMap = mpPropSet->getPropertyMapEntry(PropertyName);
+
+    if( !HasSdrObject() || pMap == nullptr )
+        throw beans::UnknownPropertyException( PropertyName, static_cast<cppu::OWeakObject*>(this));
+
+    beans::PropertyState eState;
+    if( !getPropertyStateImpl( pMap, eState ) )
+    {
+        const SfxItemSet& rSet = GetSdrObject()->GetMergedItemSet();
+
+        switch( rSet.GetItemState( pMap->nWID, false ) )
+        {
+        case SfxItemState::SET:
+            eState = beans::PropertyState_DIRECT_VALUE;
+            break;
+        case SfxItemState::DEFAULT:
+            eState = beans::PropertyState_DEFAULT_VALUE;
+            break;
+        default:
+            eState = beans::PropertyState_AMBIGUOUS_VALUE;
+            break;
+        }
+
+        // if an item is set, this doesn't mean we want it :)
+        if( beans::PropertyState_DIRECT_VALUE == eState )
+        {
+            switch( pMap->nWID )
+            {
+            // the following items are disabled by changing the
+            // fill style or the line style. so there is no need
+            // to export items without names which should be empty
+            case XATTR_FILLBITMAP:
+            case XATTR_FILLGRADIENT:
+            case XATTR_FILLHATCH:
+            case XATTR_LINEDASH:
+                {
+                    const NameOrIndex* pItem = rSet.GetItem<NameOrIndex>(pMap->nWID);
+                    if( ( pItem == nullptr ) || pItem->GetName().isEmpty() )
+                        eState = beans::PropertyState_DEFAULT_VALUE;
+                }
+                break;
+
+            // #i36115#
+            // If e.g. the LineStart is on NONE and thus the string has length 0, it still
+            // may be a hard attribute covering the set LineStart of the parent (Style).
+            // #i37644#
+            // same is for fill float transparency
+            case XATTR_LINEEND:
+            case XATTR_LINESTART:
+            case XATTR_FILLFLOATTRANSPARENCE:
+                {
+                    const NameOrIndex* pItem = rSet.GetItem<NameOrIndex>(pMap->nWID);
+                    if ( pItem == nullptr )
+                        eState = beans::PropertyState_DEFAULT_VALUE;
+                }
+                break;
+            case XATTR_FILLCOLOR:
+                if (pMap->nMemberId == MID_COLOR_THEME_INDEX)
+                {
+                    const XFillColorItem* pColor = rSet.GetItem<XFillColorItem>(pMap->nWID);
+                    if (pColor->GetThemeColor().GetThemeIndex() == -1)
+                    {
+                        eState = beans::PropertyState_DEFAULT_VALUE;
+                    }
+                }
+                else if (pMap->nMemberId == MID_COLOR_LUM_MOD)
+                {
+                    const XFillColorItem* pColor = rSet.GetItem<XFillColorItem>(pMap->nWID);
+                    if (pColor->GetThemeColor().GetLumMod() == 10000)
+                    {
+                        eState = beans::PropertyState_DEFAULT_VALUE;
+                    }
+                }
+                else if (pMap->nMemberId == MID_COLOR_LUM_OFF)
+                {
+                    const XFillColorItem* pColor = rSet.GetItem<XFillColorItem>(pMap->nWID);
+                    if (pColor->GetThemeColor().GetLumOff() == 0)
+                    {
+                        eState = beans::PropertyState_DEFAULT_VALUE;
+                    }
+                }
+                break;
+            }
+        }
+    }
+    return eState;
+}
+
+bool SvxShape::setPropertyValueImpl( const OUString&, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue )
+{
+    switch( pProperty->nWID )
+    {
+    case OWN_ATTR_CAPTION_POINT:
+    {
+        awt::Point aPnt;
+        if( rValue >>= aPnt )
+        {
+            Point aVclPoint( aPnt.X, aPnt.Y );
+
+            // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm
+            // Need to adapt aVclPoint from 100thmm to app-specific
+            ForceMetricToItemPoolMetric(aVclPoint);
+
+            // #90763# position is relative to top left, make it absolute
+            basegfx::B2DPolyPolygon aNewPolyPolygon;
+            basegfx::B2DHomMatrix aNewHomogenMatrix;
+            GetSdrObject()->TRGetBaseGeometry(aNewHomogenMatrix, aNewPolyPolygon);
+
+            aVclPoint.AdjustX(basegfx::fround(aNewHomogenMatrix.get(0, 2)) );
+            aVclPoint.AdjustY(basegfx::fround(aNewHomogenMatrix.get(1, 2)) );
+
+            // #88491# position relative to anchor
+            if( GetSdrObject()->getSdrModelFromSdrObject().IsWriter() )
+            {
+                aVclPoint += GetSdrObject()->GetAnchorPos();
+            }
+
+            static_cast<SdrCaptionObj*>(GetSdrObject())->SetTailPos(aVclPoint);
+
+            return true;
+        }
+        break;
+    }
+    case OWN_ATTR_TRANSFORMATION:
+    {
+        drawing::HomogenMatrix3 aMatrix;
+        if(rValue >>= aMatrix)
+        {
+            basegfx::B2DPolyPolygon aNewPolyPolygon;
+            basegfx::B2DHomMatrix aNewHomogenMatrix;
+
+            // tdf#117145 SdrModel data is app-specific
+            GetSdrObject()->TRGetBaseGeometry(aNewHomogenMatrix, aNewPolyPolygon);
+
+            aNewHomogenMatrix.set(0, 0, aMatrix.Line1.Column1);
+            aNewHomogenMatrix.set(0, 1, aMatrix.Line1.Column2);
+            aNewHomogenMatrix.set(0, 2, aMatrix.Line1.Column3);
+            aNewHomogenMatrix.set(1, 0, aMatrix.Line2.Column1);
+            aNewHomogenMatrix.set(1, 1, aMatrix.Line2.Column2);
+            aNewHomogenMatrix.set(1, 2, aMatrix.Line2.Column3);
+            aNewHomogenMatrix.set(2, 0, aMatrix.Line3.Column1);
+            aNewHomogenMatrix.set(2, 1, aMatrix.Line3.Column2);
+            aNewHomogenMatrix.set(2, 2, aMatrix.Line3.Column3);
+
+            // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm
+            // Need to adapt aNewHomogenMatrix from 100thmm to app-specific
+            ForceMetricToItemPoolMetric(aNewHomogenMatrix);
+
+            GetSdrObject()->TRSetBaseGeometry(aNewHomogenMatrix, aNewPolyPolygon);
+            return true;
+        }
+        break;
+    }
+
+    case OWN_ATTR_ZORDER:
+    {
+        sal_Int32 nNewOrdNum = 0;
+        if(rValue >>= nNewOrdNum)
+        {
+            SdrObjList* pObjList = GetSdrObject()->getParentSdrObjListFromSdrObject();
+            if( pObjList )
+                pObjList->SetExistingObjectOrdNum( GetSdrObject(), static_cast<size_t>(nNewOrdNum) );
+            return true;
+        }
+        break;
+    }
+    case OWN_ATTR_FRAMERECT:
+    {
+        awt::Rectangle aUnoRect;
+        if(rValue >>= aUnoRect)
+        {
+            Point aTopLeft( aUnoRect.X, aUnoRect.Y );
+            Size aObjSize( aUnoRect.Width, aUnoRect.Height );
+            ForceMetricToItemPoolMetric(aTopLeft);
+            ForceMetricToItemPoolMetric(aObjSize);
+            tools::Rectangle aRect;
+            aRect.SetPos(aTopLeft);
+            aRect.SetSize(aObjSize);
+            GetSdrObject()->SetSnapRect(aRect);
+            return true;
+        }
+        break;
+    }
+    case OWN_ATTR_MIRRORED:
+    {
+        bool bMirror;
+        if(rValue >>= bMirror )
+        {
+            SdrGrafObj* pObj = dynamic_cast< SdrGrafObj* >( GetSdrObject() );
+            if( pObj )
+                pObj->SetMirrored(bMirror);
+            return true;
+        }
+        break;
+    }
+    case OWN_ATTR_EDGE_START_OBJ:
+    case OWN_ATTR_EDGE_END_OBJ:
+    case OWN_ATTR_GLUEID_HEAD:
+    case OWN_ATTR_GLUEID_TAIL:
+    case OWN_ATTR_EDGE_START_POS:
+    case OWN_ATTR_EDGE_END_POS:
+    case OWN_ATTR_EDGE_POLYPOLYGONBEZIER:
+    {
+        SdrEdgeObj* pEdgeObj = dynamic_cast< SdrEdgeObj* >(GetSdrObject());
+        if(pEdgeObj)
+        {
+            switch(pProperty->nWID)
+            {
+            case OWN_ATTR_EDGE_START_OBJ:
+            case OWN_ATTR_EDGE_END_OBJ:
+                {
+                    Reference< drawing::XShape > xShape;
+                    if( rValue >>= xShape )
+                    {
+                        SdrObject* pNode = SdrObject::getSdrObjectFromXShape(xShape);
+                        if( pNode )
+                        {
+                            pEdgeObj->ConnectToNode( pProperty->nWID == OWN_ATTR_EDGE_START_OBJ, pNode );
+                            pEdgeObj->setGluePointIndex( pProperty->nWID == OWN_ATTR_EDGE_START_OBJ );
+                            return true;
+                        }
+                    }
+                    break;
+                }
+
+            case OWN_ATTR_EDGE_START_POS:
+            case OWN_ATTR_EDGE_END_POS:
+                {
+                    awt::Point aUnoPoint;
+                    if( rValue >>= aUnoPoint )
+                    {
+                        Point aPoint( aUnoPoint.X, aUnoPoint.Y );
+
+                        // Reintroduction of fix for issue i59051 (#i108851#)
+                        // perform metric change before applying anchor position,
+                        // because the anchor position is in pool metric.
+                        ForceMetricToItemPoolMetric( aPoint );
+                        if( GetSdrObject()->getSdrModelFromSdrObject().IsWriter() )
+                            aPoint += GetSdrObject()->GetAnchorPos();
+
+                        pEdgeObj->SetTailPoint( pProperty->nWID == OWN_ATTR_EDGE_START_POS, aPoint );
+                        return true;
+                    }
+                    break;
+                }
+
+            case OWN_ATTR_GLUEID_HEAD:
+            case OWN_ATTR_GLUEID_TAIL:
+                {
+                    sal_Int32 nId = 0;
+                    if( rValue >>= nId )
+                    {
+                        pEdgeObj->setGluePointIndex( pProperty->nWID == OWN_ATTR_GLUEID_HEAD, nId );
+                        return true;
+                    }
+                    break;
+                }
+            case OWN_ATTR_EDGE_POLYPOLYGONBEZIER:
+                {
+                    basegfx::B2DPolyPolygon aNewPolyPolygon;
+
+                    // #123616# be a little bit more flexible regarding the data type used
+                    if( auto s = o3tl::tryAccess<drawing::PointSequenceSequence>(rValue) )
+                    {
+                        // get polygpon data from PointSequenceSequence
+                        aNewPolyPolygon = basegfx::utils::UnoPointSequenceSequenceToB2DPolyPolygon(
+                            *s);
+                    }
+                    else if( auto cs = o3tl::tryAccess<drawing::PolyPolygonBezierCoords>(rValue) )
+                    {
+                        // get polygpon data from PolyPolygonBezierCoords
+                        aNewPolyPolygon = basegfx::utils::UnoPolyPolygonBezierCoordsToB2DPolyPolygon(
+                            *cs);
+                    }
+
+                    if(aNewPolyPolygon.count())
+                    {
+                        // Reintroduction of fix for issue i59051 (#i108851#)
+                        ForceMetricToItemPoolMetric( aNewPolyPolygon );
+                        if( GetSdrObject()->getSdrModelFromSdrObject().IsWriter() )
+                        {
+                            Point aPoint( GetSdrObject()->GetAnchorPos() );
+                            aNewPolyPolygon.transform(basegfx::utils::createTranslateB2DHomMatrix(aPoint.X(), aPoint.Y()));
+                        }
+                        pEdgeObj->SetEdgeTrackPath( aNewPolyPolygon );
+                        return true;
+                    }
+                }
+            }
+        }
+        break;
+    }
+    case OWN_ATTR_MEASURE_START_POS:
+    case OWN_ATTR_MEASURE_END_POS:
+    {
+        SdrMeasureObj* pMeasureObj = dynamic_cast< SdrMeasureObj* >(GetSdrObject());
+        awt::Point aUnoPoint;
+        if(pMeasureObj && ( rValue >>= aUnoPoint ) )
+        {
+            Point aPoint( aUnoPoint.X, aUnoPoint.Y );
+
+            // Reintroduction of fix for issue #i59051# (#i108851#)
+            ForceMetricToItemPoolMetric( aPoint );
+            if( GetSdrObject()->getSdrModelFromSdrObject().IsWriter() )
+                aPoint += GetSdrObject()->GetAnchorPos();
+
+            pMeasureObj->NbcSetPoint( aPoint, pProperty->nWID == OWN_ATTR_MEASURE_START_POS ? 0 : 1 );
+            pMeasureObj->SetChanged();
+            pMeasureObj->BroadcastObjectChange();
+            return true;
+        }
+        break;
+    }
+    case OWN_ATTR_FILLBMP_MODE:
+        {
+            drawing::BitmapMode eMode;
+            if(!(rValue >>= eMode) )
+            {
+                sal_Int32 nMode = 0;
+                if(!(rValue >>= nMode))
+                    break;
+
+                eMode = static_cast<drawing::BitmapMode>(nMode);
+            }
+            GetSdrObject()->SetMergedItem( XFillBmpStretchItem( eMode == drawing::BitmapMode_STRETCH ) );
+            GetSdrObject()->SetMergedItem( XFillBmpTileItem( eMode == drawing::BitmapMode_REPEAT ) );
+            return true;
+        }
+
+    case SDRATTR_LAYERID:
+    {
+        sal_Int16 nLayerId = sal_Int16();
+        if( rValue >>= nLayerId )
+        {
+            SdrLayer* pLayer = GetSdrObject()->getSdrModelFromSdrObject().GetLayerAdmin().GetLayerPerID(SdrLayerID(nLayerId));
+            if( pLayer )
+            {
+                GetSdrObject()->SetLayer(SdrLayerID(nLayerId));
+                return true;
+            }
+        }
+        break;
+    }
+
+    case SDRATTR_LAYERNAME:
+    {
+        OUString aLayerName;
+        if( rValue >>= aLayerName )
+        {
+            const SdrLayer* pLayer = GetSdrObject()->getSdrModelFromSdrObject().GetLayerAdmin().GetLayer(aLayerName);
+            if( pLayer != nullptr )
+            {
+                GetSdrObject()->SetLayer( pLayer->GetID() );
+                return true;
+            }
+        }
+        break;
+    }
+    case SDRATTR_ROTATEANGLE:
+    {
+        sal_Int32 nTmp = 0;
+        if( rValue >>= nTmp )
+        {
+            Degree100 nAngle(nTmp);
+            Point aRef1(GetSdrObject()->GetSnapRect().Center());
+            nAngle -= GetSdrObject()->GetRotateAngle();
+            if (nAngle)
+            {
+                double nSin = sin(toRadians(nAngle));
+                double nCos = cos(toRadians(nAngle));
+                GetSdrObject()->Rotate(aRef1,nAngle,nSin,nCos);
+            }
+            return true;
+        }
+
+        break;
+    }
+
+    case SDRATTR_SHEARANGLE:
+    {
+        sal_Int32 nTmp = 0;
+        if( rValue >>= nTmp )
+        {
+            Degree100 nShear(nTmp);
+            nShear -= GetSdrObject()->GetShearAngle();
+            if(nShear)
+            {
+                Point aRef1(GetSdrObject()->GetSnapRect().Center());
+                double nTan = tan(toRadians(nShear));
+                GetSdrObject()->Shear(aRef1,nShear,nTan,false);
+                return true;
+            }
+        }
+
+        break;
+    }
+
+    case OWN_ATTR_INTEROPGRABBAG:
+    {
+        GetSdrObject()->SetGrabBagItem(rValue);
+        return true;
+    }
+
+    case SDRATTR_OBJMOVEPROTECT:
+    {
+        bool bMoveProtect;
+        if( rValue >>= bMoveProtect )
+        {
+            GetSdrObject()->SetMoveProtect(bMoveProtect);
+            return true;
+        }
+        break;
+    }
+    case SDRATTR_OBJECTNAME:
+    {
+        OUString aName;
+        if( rValue >>= aName )
+        {
+            GetSdrObject()->SetName( aName );
+            return true;
+        }
+        break;
+    }
+
+    case OWN_ATTR_TEXTFITTOSIZESCALE:
+    {
+        sal_Int16 nMaxScale = 0;
+        if (rValue >>= nMaxScale)
+        {
+            SdrTextFitToSizeTypeItem aItem(GetSdrObject()->GetMergedItem(SDRATTR_TEXT_FITTOSIZE));
+            aItem.SetMaxScale(nMaxScale);
+            GetSdrObject()->SetMergedItem(aItem);
+            return true;
+        }
+        break;
+    }
+
+    // #i68101#
+    case OWN_ATTR_MISC_OBJ_TITLE:
+    {
+        OUString aTitle;
+        if( rValue >>= aTitle )
+        {
+            GetSdrObject()->SetTitle( aTitle );
+            return true;
+        }
+        break;
+    }
+    case OWN_ATTR_MISC_OBJ_DESCRIPTION:
+    {
+        OUString aDescription;
+        if( rValue >>= aDescription )
+        {
+            GetSdrObject()->SetDescription( aDescription );
+            return true;
+        }
+        break;
+    }
+
+    case SDRATTR_OBJPRINTABLE:
+    {
+        bool bPrintable;
+        if( rValue >>= bPrintable )
+        {
+            GetSdrObject()->SetPrintable(bPrintable);
+            return true;
+        }
+        break;
+    }
+    case SDRATTR_OBJVISIBLE:
+    {
+        bool bVisible;
+        if( rValue >>= bVisible )
+        {
+            GetSdrObject()->SetVisible(bVisible);
+            return true;
+        }
+        break;
+    }
+    case SDRATTR_OBJSIZEPROTECT:
+    {
+        bool bResizeProtect;
+        if( rValue >>= bResizeProtect )
+        {
+            GetSdrObject()->SetResizeProtect(bResizeProtect);
+            return true;
+        }
+        break;
+    }
+    case OWN_ATTR_PAGE_NUMBER:
+    {
+        sal_Int32 nPageNum = 0;
+        if( (rValue >>= nPageNum) && ( nPageNum >= 0 ) && ( nPageNum <= 0xffff ) )
+        {
+            SdrPageObj* pPageObj = dynamic_cast< SdrPageObj* >(GetSdrObject());
+            if( pPageObj )
+            {
+                SdrModel& rModel(pPageObj->getSdrModelFromSdrObject());
+                SdrPage* pNewPage = nullptr;
+                const sal_uInt16 nDestinationPageNum(static_cast<sal_uInt16>((nPageNum << 1) - 1));
+
+                if(nDestinationPageNum < rModel.GetPageCount())
+                {
+                    pNewPage = rModel.GetPage(nDestinationPageNum);
+                }
+
+                pPageObj->SetReferencedPage(pNewPage);
+            }
+
+            return true;
+        }
+        break;
+    }
+    case XATTR_FILLBITMAP:
+    case XATTR_FILLGRADIENT:
+    case XATTR_FILLHATCH:
+    case XATTR_FILLFLOATTRANSPARENCE:
+    case XATTR_LINEEND:
+    case XATTR_LINESTART:
+    case XATTR_LINEDASH:
+    {
+        if( pProperty->nMemberId == MID_NAME )
+        {
+            OUString aApiName;
+            if( rValue >>= aApiName )
+            {
+                if( SetFillAttribute( pProperty->nWID, aApiName ) )
+                    return true;
+            }
+            break;
+        }
+        else
+        {
+            return false;
+        }
+    }
+
+    case OWN_ATTR_TEXTCOLUMNS:
+    {
+        if (auto pTextObj = dynamic_cast<SdrTextObj*>(GetSdrObject()))
+        {
+            css::uno::Reference<css::text::XTextColumns> xTextColumns;
+            if (rValue >>= xTextColumns)
+            {
+                pTextObj->SetTextColumnsNumber(xTextColumns->getColumnCount());
+                if (css::uno::Reference<css::beans::XPropertySet> xPropSet{ xTextColumns,
+                                                                            css::uno::UNO_QUERY })
+                {
+                    auto aVal = xPropSet->getPropertyValue("AutomaticDistance");
+                    if (sal_Int32 nSpacing; aVal >>= nSpacing)
+                        pTextObj->SetTextColumnsSpacing(nSpacing);
+                }
+            }
+        }
+        return true;
+    }
+
+    case OWN_ATTR_HYPERLINK:
+    {
+        OUString sHyperlink;
+        if (rValue >>= sHyperlink)
+        {
+            GetSdrObject()->setHyperlink(sHyperlink);
+            return true;
+        }
+        break;
+    }
+
+    default:
+    {
+        return false;
+    }
+    }
+
+    OUString sExceptionMessage  ("IllegalArgumentException in SvxShape::setPropertyValueImpl."
+                                " Property Type: " + pProperty->aType.getTypeName() + " Property nWID: " + OUString::number(pProperty->nWID)
+                                + " Value Type: " + (rValue.hasValue() ? rValue.getValueTypeName() : "void (no value)"));
+
+    throw lang::IllegalArgumentException(sExceptionMessage, nullptr, 1);
+}
+
+
+bool SvxShape::getPropertyValueImpl( const OUString&, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue )
+{
+    switch( pProperty->nWID )
+    {
+    case OWN_ATTR_CAPTION_POINT:
+    {
+        Point aVclPoint = static_cast<SdrCaptionObj*>(GetSdrObject())->GetTailPos();
+
+        // #88491# make pos relative to anchor
+        if( GetSdrObject()->getSdrModelFromSdrObject().IsWriter() )
+        {
+            aVclPoint -= GetSdrObject()->GetAnchorPos();
+        }
+
+        // #90763# pos is absolute, make it relative to top left
+        basegfx::B2DPolyPolygon aNewPolyPolygon;
+        basegfx::B2DHomMatrix aNewHomogenMatrix;
+        GetSdrObject()->TRGetBaseGeometry(aNewHomogenMatrix, aNewPolyPolygon);
+
+        aVclPoint.AdjustX( -(basegfx::fround(aNewHomogenMatrix.get(0, 2))) );
+        aVclPoint.AdjustY( -(basegfx::fround(aNewHomogenMatrix.get(1, 2))) );
+
+        // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm
+        // Need to adapt aVclPoint from app-specific to 100thmm
+        ForceMetricTo100th_mm(aVclPoint);
+
+        awt::Point aPnt( aVclPoint.X(), aVclPoint.Y() );
+        rValue <<= aPnt;
+        break;
+    }
+
+    case OWN_ATTR_TRANSFORMATION:
+    {
+        basegfx::B2DPolyPolygon aNewPolyPolygon;
+        basegfx::B2DHomMatrix aNewHomogenMatrix;
+        GetSdrObject()->TRGetBaseGeometry(aNewHomogenMatrix, aNewPolyPolygon);
+        drawing::HomogenMatrix3 aMatrix;
+
+        // tdf#117145 metric of SdrModel is app-specific, metric of UNO API is 100thmm
+        // Need to adapt aNewHomogenMatrix from app-specific to 100thmm
+        ForceMetricTo100th_mm(aNewHomogenMatrix);
+
+        aMatrix.Line1.Column1 = aNewHomogenMatrix.get(0, 0);
+        aMatrix.Line1.Column2 = aNewHomogenMatrix.get(0, 1);
+        aMatrix.Line1.Column3 = aNewHomogenMatrix.get(0, 2);
+        aMatrix.Line2.Column1 = aNewHomogenMatrix.get(1, 0);
+        aMatrix.Line2.Column2 = aNewHomogenMatrix.get(1, 1);
+        aMatrix.Line2.Column3 = aNewHomogenMatrix.get(1, 2);
+        aMatrix.Line3.Column1 = aNewHomogenMatrix.get(2, 0);
+        aMatrix.Line3.Column2 = aNewHomogenMatrix.get(2, 1);
+        aMatrix.Line3.Column3 = aNewHomogenMatrix.get(2, 2);
+
+        rValue <<= aMatrix;
+
+        break;
+    }
+
+    case OWN_ATTR_ZORDER:
+    {
+        rValue <<= static_cast<sal_Int32>(GetSdrObject()->GetOrdNum());
+        break;
+    }
+
+    case OWN_ATTR_BITMAP:
+    {
+        rValue = GetBitmap();
+        if(!rValue.hasValue())
+            throw uno::RuntimeException();
+
+        break;
+    }
+
+    case OWN_ATTR_ISFONTWORK:
+    {
+        bool bIsFontwork = false;
+        if (const SdrTextObj* pTextObj = dynamic_cast<const SdrTextObj*>(GetSdrObject()))
+            bIsFontwork = pTextObj->IsFontwork();
+        rValue <<= bIsFontwork;
+        break;
+    }
+
+    case OWN_ATTR_FRAMERECT:
+    {
+        tools::Rectangle aRect( GetSdrObject()->GetSnapRect() );
+        Point aTopLeft( aRect.TopLeft() );
+        Size aObjSize( aRect.GetWidth(), aRect.GetHeight() );
+        ForceMetricTo100th_mm(aTopLeft);
+        ForceMetricTo100th_mm(aObjSize);
+        css::awt::Rectangle aUnoRect(
+            aTopLeft.X(), aTopLeft.Y(),
+            aObjSize.getWidth(), aObjSize.getHeight() );
+        rValue <<= aUnoRect;
+        break;
+    }
+
+    case OWN_ATTR_BOUNDRECT:
+    {
+        tools::Rectangle aRect( GetSdrObject()->GetCurrentBoundRect() );
+        Point aTopLeft( aRect.TopLeft() );
+        Size aObjSize( aRect.GetWidth(), aRect.GetHeight() );
+        ForceMetricTo100th_mm(aTopLeft);
+        ForceMetricTo100th_mm(aObjSize);
+        css::awt::Rectangle aUnoRect(
+            aTopLeft.X(), aTopLeft.Y(),
+            aObjSize.getWidth(), aObjSize.getHeight() );
+        rValue <<= aUnoRect;
+        break;
+    }
+
+    case OWN_ATTR_LDNAME:
+    {
+        OUString aName( GetSdrObject()->GetName() );
+        rValue <<= aName;
+        break;
+    }
+
+    case OWN_ATTR_LDBITMAP:
+    {
+        OUString sId;
+        if( GetSdrObject()->GetObjInventor() == SdrInventor::Default && GetSdrObject()->GetObjIdentifier() == SdrObjKind::OLE2 )
+        {
+            sId = RID_UNODRAW_OLE2;
+        }
+        else if( GetSdrObject()->GetObjInventor() == SdrInventor::Default && GetSdrObject()->GetObjIdentifier() == SdrObjKind::Graphic )
+        {
+            sId = RID_UNODRAW_GRAPHICS;
+        }
+        else
+        {
+            sId = RID_UNODRAW_OBJECTS;
+        }
+
+        BitmapEx aBmp(sId);
+        Reference<awt::XBitmap> xBmp(VCLUnoHelper::CreateBitmap(aBmp));
+
+        rValue <<= xBmp;
+        break;
+    }
+
+    case OWN_ATTR_MIRRORED:
+    {
+        bool bMirror = false;
+        if( HasSdrObject() )
+            if (auto pGrafObj = dynamic_cast<SdrGrafObj*>(GetSdrObject()) )
+                bMirror = pGrafObj->IsMirrored();
+
+        rValue <<= bMirror;
+        break;
+    }
+
+    case OWN_ATTR_EDGE_START_OBJ:
+    case OWN_ATTR_EDGE_START_POS:
+    case OWN_ATTR_EDGE_END_POS:
+    case OWN_ATTR_EDGE_END_OBJ:
+    case OWN_ATTR_GLUEID_HEAD:
+    case OWN_ATTR_GLUEID_TAIL:
+    case OWN_ATTR_EDGE_POLYPOLYGONBEZIER:
+    {
+        SdrEdgeObj* pEdgeObj = dynamic_cast<SdrEdgeObj*>(GetSdrObject());
+        if(pEdgeObj)
+        {
+            switch(pProperty->nWID)
+            {
+            case OWN_ATTR_EDGE_START_OBJ:
+            case OWN_ATTR_EDGE_END_OBJ:
+                {
+                    SdrObject* pNode = pEdgeObj->GetConnectedNode(pProperty->nWID == OWN_ATTR_EDGE_START_OBJ);
+                    if(pNode)
+                    {
+                        Reference< drawing::XShape > xShape( GetXShapeForSdrObject( pNode ) );
+                        if(xShape.is())
+                            rValue <<= xShape;
+
+                    }
+                    break;
+                }
+
+            case OWN_ATTR_EDGE_START_POS:
+            case OWN_ATTR_EDGE_END_POS:
+                {
+                    Point aPoint( pEdgeObj->GetTailPoint( pProperty->nWID == OWN_ATTR_EDGE_START_POS ) );
+                    if( GetSdrObject()->getSdrModelFromSdrObject().IsWriter() )
+                        aPoint -= GetSdrObject()->GetAnchorPos();
+
+                    ForceMetricTo100th_mm( aPoint );
+                    awt::Point aUnoPoint( aPoint.X(), aPoint.Y() );
+
+                    rValue <<= aUnoPoint;
+                    break;
+                }
+            case OWN_ATTR_GLUEID_HEAD:
+            case OWN_ATTR_GLUEID_TAIL:
+                {
+                    rValue <<= pEdgeObj->getGluePointIndex( pProperty->nWID == OWN_ATTR_GLUEID_HEAD );
+                    break;
+                }
+            case OWN_ATTR_EDGE_POLYPOLYGONBEZIER:
+                {
+                    basegfx::B2DPolyPolygon aPolyPoly( pEdgeObj->GetEdgeTrackPath() );
+                    if( GetSdrObject()->getSdrModelFromSdrObject().IsWriter() )
+                    {
+                        Point aPoint( GetSdrObject()->GetAnchorPos() );
+                        aPolyPoly.transform(basegfx::utils::createTranslateB2DHomMatrix(-aPoint.X(), -aPoint.Y()));
+                    }
+                    // Reintroduction of fix for issue #i59051# (#i108851#)
+                    ForceMetricTo100th_mm( aPolyPoly );
+                    drawing::PolyPolygonBezierCoords aRetval;
+                    basegfx::utils::B2DPolyPolygonToUnoPolyPolygonBezierCoords( aPolyPoly, aRetval);
+                    rValue <<= aRetval;
+                    break;
+                }
+            }
+        }
+        break;
+    }
+
+    case OWN_ATTR_MEASURE_START_POS:
+    case OWN_ATTR_MEASURE_END_POS:
+    {
+        SdrMeasureObj* pMeasureObj = dynamic_cast<SdrMeasureObj*>(GetSdrObject());
+        if(pMeasureObj)
+        {
+            Point aPoint( pMeasureObj->GetPoint( pProperty->nWID == OWN_ATTR_MEASURE_START_POS ? 0 : 1 ) );
+            if( GetSdrObject()->getSdrModelFromSdrObject().IsWriter() )
+                aPoint -= GetSdrObject()->GetAnchorPos();
+
+            // Reintroduction of fix for issue #i59051# (#i108851#)
+            ForceMetricTo100th_mm( aPoint );
+            awt::Point aUnoPoint( aPoint.X(), aPoint.Y() );
+
+            rValue <<= aUnoPoint;
+            break;
+        }
+        break;
+    }
+
+    case OWN_ATTR_FILLBMP_MODE:
+    {
+        const SfxItemSet& rObjItemSet = GetSdrObject()->GetMergedItemSet();
+
+        if (rObjItemSet.Get(XATTR_FILLBMP_TILE).GetValue())
+        {
+            rValue <<= drawing::BitmapMode_REPEAT;
+        }
+        else if (rObjItemSet.Get(XATTR_FILLBMP_STRETCH).GetValue())
+        {
+            rValue <<= drawing::BitmapMode_STRETCH;
+        }
+        else
+        {
+            rValue <<= drawing::BitmapMode_NO_REPEAT;
+        }
+        break;
+    }
+    case SDRATTR_LAYERID:
+        rValue <<= GetSdrObject()->GetLayer().get();
+        break;
+
+    case SDRATTR_LAYERNAME:
+    {
+        SdrLayer* pLayer = GetSdrObject()->getSdrModelFromSdrObject().GetLayerAdmin().GetLayerPerID(GetSdrObject()->GetLayer());
+        if( pLayer )
+        {
+            rValue <<= pLayer->GetName();
+        }
+        break;
+    }
+
+    case SDRATTR_ROTATEANGLE:
+        rValue <<= static_cast<sal_Int32>(GetSdrObject()->GetRotateAngle());
+        break;
+
+    case SDRATTR_SHEARANGLE:
+        rValue <<= static_cast<sal_Int32>(GetSdrObject()->GetShearAngle());
+        break;
+
+    case OWN_ATTR_INTEROPGRABBAG:
+    {
+        GetSdrObject()->GetGrabBagItem(rValue);
+        break;
+    }
+
+    case SDRATTR_OBJMOVEPROTECT:
+        rValue <<= GetSdrObject()->IsMoveProtect();
+        break;
+
+    case SDRATTR_OBJECTNAME:
+    {
+        OUString aName( GetSdrObject()->GetName() );
+        rValue <<= aName;
+        break;
+    }
+
+    // #i68101#
+    case OWN_ATTR_MISC_OBJ_TITLE:
+    {
+        OUString aTitle( GetSdrObject()->GetTitle() );
+        rValue <<= aTitle;
+        break;
+    }
+
+    case OWN_ATTR_MISC_OBJ_DESCRIPTION:
+    {
+        OUString aDescription( GetSdrObject()->GetDescription() );
+        rValue <<= aDescription;
+        break;
+    }
+
+    case SDRATTR_OBJPRINTABLE:
+        rValue <<= GetSdrObject()->IsPrintable();
+        break;
+
+    case SDRATTR_OBJVISIBLE:
+        rValue <<= GetSdrObject()->IsVisible();
+        break;
+
+    case SDRATTR_OBJSIZEPROTECT:
+        rValue <<= GetSdrObject()->IsResizeProtect();
+        break;
+
+    case OWN_ATTR_PAGE_NUMBER:
+    {
+        SdrPageObj* pPageObj = dynamic_cast<SdrPageObj*>(GetSdrObject());
+        if(pPageObj)
+        {
+            SdrPage* pPage = pPageObj->GetReferencedPage();
+            sal_Int32 nPageNumber = pPage ? pPage->GetPageNum() : 0;
+            nPageNumber++;
+            nPageNumber >>= 1;
+            rValue <<= nPageNumber;
+        }
+        break;
+    }
+
+    case OWN_ATTR_UINAME_SINGULAR:
+    {
+        rValue <<= GetSdrObject()->TakeObjNameSingul();
+        break;
+    }
+
+    case OWN_ATTR_TEXTFITTOSIZESCALE:
+    {
+        rValue <<= GetTextFitToSizeScale(GetSdrObject());
+        break;
+    }
+
+    case OWN_ATTR_UINAME_PLURAL:
+    {
+        rValue <<= GetSdrObject()->TakeObjNamePlural();
+        break;
+    }
+    case OWN_ATTR_METAFILE:
+    {
+        SdrOle2Obj* pObj = dynamic_cast<SdrOle2Obj*>(GetSdrObject());
+        if( pObj )
+        {
+            const Graphic* pGraphic = pObj->GetGraphic();
+            if( pGraphic )
+            {
+                bool bIsWMF = false;
+                if ( pGraphic->IsGfxLink() )
+                {
+                    GfxLink aLnk = pGraphic->GetGfxLink();
+                    if ( aLnk.GetType() == GfxLinkType::NativeWmf )
+                    {
+                        bIsWMF = true;
+                        uno::Sequence<sal_Int8> aSeq(reinterpret_cast<sal_Int8 const *>(aLnk.GetData()), static_cast<sal_Int32>(aLnk.GetDataSize()));
+                        rValue <<= aSeq;
+                    }
+                }
+                if ( !bIsWMF )
+                {
+                    // #119735# just use GetGDIMetaFile, it will create a buffered version of contained bitmap now automatically
+                    GDIMetaFile aMtf(pObj->GetGraphic()->GetGDIMetaFile());
+                    SvMemoryStream aDestStrm( 65535, 65535 );
+                    ConvertGDIMetaFileToWMF( aMtf, aDestStrm, nullptr, false );
+                    const uno::Sequence<sal_Int8> aSeq(
+                        static_cast< const sal_Int8* >(aDestStrm.GetData()),
+                        aDestStrm.GetEndOfData());
+                    rValue <<= aSeq;
+                }
+            }
+        }
+        else
+        {
+            rValue = GetBitmap( true );
+        }
+        break;
+    }
+
+    case OWN_ATTR_TEXTCOLUMNS:
+    {
+        if (auto pTextObj = dynamic_cast<const SdrTextObj*>(GetSdrObject()))
+        {
+            if (pTextObj->HasTextColumnsNumber() || pTextObj->HasTextColumnsSpacing())
+            {
+                auto xIf = SvxXTextColumns_createInstance();
+                css::uno::Reference<css::text::XTextColumns> xCols(xIf, css::uno::UNO_QUERY_THROW);
+                xCols->setColumnCount(pTextObj->GetTextColumnsNumber());
+                css::uno::Reference<css::beans::XPropertySet> xProp(xIf, css::uno::UNO_QUERY_THROW);
+                xProp->setPropertyValue("AutomaticDistance",
+                                        css::uno::Any(pTextObj->GetTextColumnsSpacing()));
+                rValue <<= xIf;
+            }
+        }
+        break;
+    }
+
+    case OWN_ATTR_HYPERLINK:
+    {
+        rValue <<= GetSdrObject()->getHyperlink();
+        break;
+    }
+
+    default:
+        return false;
+    }
+    return true;
+}
+
+
+bool SvxShape::getPropertyStateImpl( const SfxItemPropertyMapEntry* pProperty, css::beans::PropertyState& rState )
+{
+    if( pProperty->nWID == OWN_ATTR_FILLBMP_MODE )
+    {
+        const SfxItemSet& rSet = GetSdrObject()->GetMergedItemSet();
+
+        if( rSet.GetItemState( XATTR_FILLBMP_STRETCH, false ) == SfxItemState::SET ||
+            rSet.GetItemState( XATTR_FILLBMP_TILE, false ) == SfxItemState::SET )
+        {
+            rState = beans::PropertyState_DIRECT_VALUE;
+        }
+        else
+        {
+            rState = beans::PropertyState_AMBIGUOUS_VALUE;
+        }
+    }
+    else if((( pProperty->nWID >= OWN_ATTR_VALUE_START && pProperty->nWID <= OWN_ATTR_VALUE_END ) ||
+       ( pProperty->nWID >= SDRATTR_NOTPERSIST_FIRST && pProperty->nWID <= SDRATTR_NOTPERSIST_LAST )) && ( pProperty->nWID != SDRATTR_TEXTDIRECTION ) )
+    {
+        rState = beans::PropertyState_DIRECT_VALUE;
+    }
+    else
+    {
+        return false;
+    }
+
+    return true;
+}
+
+
+bool SvxShape::setPropertyToDefaultImpl( const SfxItemPropertyMapEntry* pProperty )
+{
+    if( pProperty->nWID == OWN_ATTR_FILLBMP_MODE )
+    {
+        GetSdrObject()->ClearMergedItem( XATTR_FILLBMP_STRETCH );
+        GetSdrObject()->ClearMergedItem( XATTR_FILLBMP_TILE );
+        return true;
+    }
+    else if((pProperty->nWID >= OWN_ATTR_VALUE_START && pProperty->nWID <= OWN_ATTR_VALUE_END ) ||
+       ( pProperty->nWID >= SDRATTR_NOTPERSIST_FIRST && pProperty->nWID <= SDRATTR_NOTPERSIST_LAST ))
+    {
+        return true;
+    }
+    else
+    {
+        return false;
+    }
+}
+
+
+uno::Sequence< beans::PropertyState > SAL_CALL SvxShape::getPropertyStates( const uno::Sequence< OUString >& aPropertyName )
+{
+    const sal_Int32 nCount = aPropertyName.getLength();
+    uno::Sequence< beans::PropertyState > aRet( nCount );
+
+    std::transform(aPropertyName.begin(), aPropertyName.end(), aRet.getArray(),
+        [this](const OUString& rName) -> beans::PropertyState { return getPropertyState(rName); });
+
+    return aRet;
+}
+
+
+void SAL_CALL SvxShape::setPropertyToDefault( const OUString& PropertyName )
+{
+    if( mpImpl->mpMaster )
+    {
+        mpImpl->mpMaster->setPropertyToDefault( PropertyName );
+    }
+    else
+    {
+        _setPropertyToDefault( PropertyName );
+    }
+}
+
+void SvxShape::_setPropertyToDefault( const OUString& PropertyName )
+{
+    ::SolarMutexGuard aGuard;
+
+    const SfxItemPropertyMapEntry* pProperty = mpPropSet->getPropertyMapEntry(PropertyName);
+
+    if( !HasSdrObject() || pProperty == nullptr )
+        throw beans::UnknownPropertyException( PropertyName, static_cast<cppu::OWeakObject*>(this));
+
+    if( !setPropertyToDefaultImpl( pProperty ) )
+    {
+        GetSdrObject()->ClearMergedItem( pProperty->nWID );
+    }
+
+    GetSdrObject()->getSdrModelFromSdrObject().SetChanged();
+}
+
+
+uno::Any SAL_CALL SvxShape::getPropertyDefault( const OUString& aPropertyName )
+{
+    if( mpImpl->mpMaster )
+    {
+        return mpImpl->mpMaster->getPropertyDefault( aPropertyName );
+    }
+    else
+    {
+        return _getPropertyDefault( aPropertyName );
+    }
+}
+
+uno::Any SvxShape::_getPropertyDefault( const OUString& aPropertyName )
+{
+    ::SolarMutexGuard aGuard;
+
+    const SfxItemPropertyMapEntry* pMap = mpPropSet->getPropertyMapEntry(aPropertyName);
+
+    if( !HasSdrObject() || pMap == nullptr )
+        throw beans::UnknownPropertyException( aPropertyName, static_cast<cppu::OWeakObject*>(this));
+
+    if(( pMap->nWID >= OWN_ATTR_VALUE_START && pMap->nWID <= OWN_ATTR_VALUE_END ) ||
+       ( pMap->nWID >= SDRATTR_NOTPERSIST_FIRST && pMap->nWID <= SDRATTR_NOTPERSIST_LAST ))
+    {
+        return getPropertyValue( aPropertyName );
+    }
+
+    // get default from ItemPool
+    if(!SfxItemPool::IsWhich(pMap->nWID))
+        throw beans::UnknownPropertyException( "No WhichID " + OUString::number(pMap->nWID) + " for " + aPropertyName, static_cast<cppu::OWeakObject*>(this));
+
+    SfxItemSet aSet( GetSdrObject()->getSdrModelFromSdrObject().GetItemPool(), pMap->nWID, pMap->nWID );
+    aSet.Put(GetSdrObject()->getSdrModelFromSdrObject().GetItemPool().GetDefaultItem(pMap->nWID));
+
+    return GetAnyForItem( aSet, pMap );
+}
+
+// XMultiPropertyStates
+void SvxShape::setAllPropertiesToDefault()
+{
+    ::SolarMutexGuard aGuard;
+
+    if( !HasSdrObject() )
+        throw lang::DisposedException();
+    GetSdrObject()->ClearMergedItem(); // nWhich == 0 => all
+
+    if(dynamic_cast<const SdrGrafObj*>(GetSdrObject()) != nullptr)
+    {
+        // defaults for graphic objects have changed:
+        GetSdrObject()->SetMergedItem( XFillStyleItem( drawing::FillStyle_NONE ) );
+        GetSdrObject()->SetMergedItem( XLineStyleItem( drawing::LineStyle_NONE ) );
+    }
+
+    // #i68523# special handling for Svx3DCharacterModeItem, this is not saved
+    // but needs to be sal_True in svx, pool default (false) in sch. Since sch
+    // does not load lathe or extrude objects, it is possible to set the items
+    // here.
+    // For other solution possibilities, see task description.
+    if( dynamic_cast<const E3dLatheObj* >(GetSdrObject())  != nullptr|| dynamic_cast<const E3dExtrudeObj* >(GetSdrObject()) != nullptr)
+    {
+        GetSdrObject()->SetMergedItem(Svx3DCharacterModeItem(true));
+    }
+
+    GetSdrObject()->getSdrModelFromSdrObject().SetChanged();
+}
+
+void SvxShape::setPropertiesToDefault(
+    const uno::Sequence<OUString>& aPropertyNames )
+{
+    for ( const auto& rPropertyName : aPropertyNames )
+        setPropertyToDefault( rPropertyName );
+}
+
+uno::Sequence<uno::Any> SvxShape::getPropertyDefaults(
+    const uno::Sequence<OUString>& aPropertyNames )
+{
+    ::std::vector<uno::Any> ret;
+    ret.reserve(aPropertyNames.getLength());
+    std::transform(aPropertyNames.begin(), aPropertyNames.end(), std::back_inserter(ret),
+        [this](const OUString& rName) -> uno::Any { return getPropertyDefault(rName); });
+    return uno::Sequence<uno::Any>( ret.data(), ret.size() );
+}
+
+
+// XServiceInfo
+
+OUString SAL_CALL SvxShape::getImplementationName()
+{
+    return "SvxShape";
+}
+
+constexpr OUStringLiteral sUNO_service_style_ParagraphProperties = u"com.sun.star.style.ParagraphProperties";
+constexpr OUStringLiteral sUNO_service_style_ParagraphPropertiesComplex = u"com.sun.star.style.ParagraphPropertiesComplex";
+constexpr OUStringLiteral sUNO_service_style_ParagraphPropertiesAsian = u"com.sun.star.style.ParagraphPropertiesAsian";
+constexpr OUStringLiteral sUNO_service_style_CharacterProperties = u"com.sun.star.style.CharacterProperties";
+constexpr OUStringLiteral sUNO_service_style_CharacterPropertiesComplex = u"com.sun.star.style.CharacterPropertiesComplex";
+constexpr OUStringLiteral sUNO_service_style_CharacterPropertiesAsian = u"com.sun.star.style.CharacterPropertiesAsian";
+
+constexpr OUStringLiteral sUNO_service_drawing_FillProperties    = u"com.sun.star.drawing.FillProperties";
+constexpr OUStringLiteral sUNO_service_drawing_TextProperties    = u"com.sun.star.drawing.TextProperties";
+constexpr OUStringLiteral sUNO_service_drawing_LineProperties    = u"com.sun.star.drawing.LineProperties";
+constexpr OUStringLiteral sUNO_service_drawing_ConnectorProperties = u"com.sun.star.drawing.ConnectorProperties";
+constexpr OUStringLiteral sUNO_service_drawing_MeasureProperties = u"com.sun.star.drawing.MeasureProperties";
+constexpr OUStringLiteral sUNO_service_drawing_ShadowProperties  = u"com.sun.star.drawing.ShadowProperties";
+
+constexpr OUStringLiteral sUNO_service_drawing_RotationDescriptor = u"com.sun.star.drawing.RotationDescriptor";
+
+constexpr OUStringLiteral sUNO_service_drawing_Text              = u"com.sun.star.drawing.Text";
+constexpr OUStringLiteral sUNO_service_drawing_GroupShape        = u"com.sun.star.drawing.GroupShape";
+
+constexpr OUStringLiteral sUNO_service_drawing_CustomShapeProperties = u"com.sun.star.drawing.CustomShapeProperties";
+constexpr OUStringLiteral sUNO_service_drawing_CustomShape       = u"com.sun.star.drawing.CustomShape";
+
+constexpr OUStringLiteral sUNO_service_drawing_PolyPolygonDescriptor = u"com.sun.star.drawing.PolyPolygonDescriptor";
+constexpr OUStringLiteral sUNO_service_drawing_PolyPolygonBezierDescriptor= u"com.sun.star.drawing.PolyPolygonBezierDescriptor";
+
+constexpr OUStringLiteral sUNO_service_drawing_LineShape         = u"com.sun.star.drawing.LineShape";
+constexpr OUStringLiteral sUNO_service_drawing_Shape             = u"com.sun.star.drawing.Shape";
+constexpr OUStringLiteral sUNO_service_drawing_RectangleShape    = u"com.sun.star.drawing.RectangleShape";
+constexpr OUStringLiteral sUNO_service_drawing_EllipseShape      = u"com.sun.star.drawing.EllipseShape";
+constexpr OUStringLiteral sUNO_service_drawing_PolyPolygonShape  = u"com.sun.star.drawing.PolyPolygonShape";
+constexpr OUStringLiteral sUNO_service_drawing_PolyLineShape     = u"com.sun.star.drawing.PolyLineShape";
+constexpr OUStringLiteral sUNO_service_drawing_OpenBezierShape   = u"com.sun.star.drawing.OpenBezierShape";
+constexpr OUStringLiteral sUNO_service_drawing_ClosedBezierShape = u"com.sun.star.drawing.ClosedBezierShape";
+constexpr OUStringLiteral sUNO_service_drawing_TextShape         = u"com.sun.star.drawing.TextShape";
+constexpr OUStringLiteral sUNO_service_drawing_GraphicObjectShape = u"com.sun.star.drawing.GraphicObjectShape";
+constexpr OUStringLiteral sUNO_service_drawing_OLE2Shape         = u"com.sun.star.drawing.OLE2Shape";
+constexpr OUStringLiteral sUNO_service_drawing_PageShape         = u"com.sun.star.drawing.PageShape";
+constexpr OUStringLiteral sUNO_service_drawing_CaptionShape      = u"com.sun.star.drawing.CaptionShape";
+constexpr OUStringLiteral sUNO_service_drawing_MeasureShape      = u"com.sun.star.drawing.MeasureShape";
+constexpr OUStringLiteral sUNO_service_drawing_FrameShape        = u"com.sun.star.drawing.FrameShape";
+constexpr OUStringLiteral sUNO_service_drawing_ControlShape      = u"com.sun.star.drawing.ControlShape";
+constexpr OUStringLiteral sUNO_service_drawing_ConnectorShape    = u"com.sun.star.drawing.ConnectorShape";
+constexpr OUStringLiteral sUNO_service_drawing_MediaShape        = u"com.sun.star.drawing.MediaShape";
+
+
+uno::Sequence< OUString > SAL_CALL SvxShape::getSupportedServiceNames()
+{
+    if( mpImpl->mpMaster )
+    {
+        return mpImpl->mpMaster->getSupportedServiceNames();
+    }
+    else
+    {
+        return _getSupportedServiceNames();
+    }
+}
+
+uno::Sequence< OUString > SvxShape::_getSupportedServiceNames()
+{
+    ::SolarMutexGuard aGuard;
+
+    if( HasSdrObject() && GetSdrObject()->GetObjInventor() == SdrInventor::Default)
+    {
+        const SdrObjKind nIdent = GetSdrObject()->GetObjIdentifier();
+
+        switch(nIdent)
+        {
+        case SdrObjKind::Group:
+            {
+                static const uno::Sequence<OUString> aSvxShape_GroupServices
+                        = { sUNO_service_drawing_GroupShape,
+                            sUNO_service_drawing_Shape };
+                return aSvxShape_GroupServices;
+            }
+        case SdrObjKind::CustomShape:
+            {
+                static const uno::Sequence<OUString> aSvxShape_CustomShapeServices
+                        = { sUNO_service_drawing_CustomShape,
+                            sUNO_service_drawing_Shape,
+                            sUNO_service_drawing_CustomShapeProperties,
+                            sUNO_service_drawing_FillProperties,
+                            sUNO_service_drawing_LineProperties,
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_CustomShapeServices;
+            }
+        case SdrObjKind::Line:
+            {
+                static const uno::Sequence<OUString> aSvxShape_LineServices
+                        = { sUNO_service_drawing_LineShape,
+
+                            sUNO_service_drawing_Shape,
+                            sUNO_service_drawing_LineProperties,
+
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_PolyPolygonDescriptor,
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_LineServices;
+            }
+
+        case SdrObjKind::Rectangle:
+            {
+                static const uno::Sequence<OUString> aSvxShape_RectServices
+                        = { sUNO_service_drawing_RectangleShape,
+
+                            sUNO_service_drawing_Shape,
+                            sUNO_service_drawing_FillProperties,
+                            sUNO_service_drawing_LineProperties,
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_RectServices;
+            }
+
+        case SdrObjKind::CircleOrEllipse:
+        case SdrObjKind::CircleSection:
+        case SdrObjKind::CircleArc:
+        case SdrObjKind::CircleCut:
+            {
+                static const uno::Sequence<OUString> aSvxShape_CircServices
+                        = { sUNO_service_drawing_EllipseShape,
+
+                            sUNO_service_drawing_Shape,
+                            sUNO_service_drawing_FillProperties,
+                            sUNO_service_drawing_LineProperties,
+
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_CircServices;
+            }
+
+        case SdrObjKind::PathPolyLine:
+        case SdrObjKind::PolyLine:
+            {
+                static const uno::Sequence<OUString> aSvxShape_PathServices
+                        = { sUNO_service_drawing_PolyLineShape,
+
+                            sUNO_service_drawing_Shape,
+                            sUNO_service_drawing_LineProperties,
+
+                            sUNO_service_drawing_PolyPolygonDescriptor,
+
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_PathServices;
+            }
+
+        case SdrObjKind::PathPoly:
+        case SdrObjKind::Polygon:
+            {
+                static const uno::Sequence<OUString> aSvxShape_PolyServices
+                        = { sUNO_service_drawing_PolyPolygonShape,
+
+                            sUNO_service_drawing_Shape,
+                            sUNO_service_drawing_LineProperties,
+                            sUNO_service_drawing_FillProperties,
+
+                            sUNO_service_drawing_PolyPolygonDescriptor,
+
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_PolyServices;
+            }
+
+        case SdrObjKind::FreehandLine:
+        case SdrObjKind::PathLine:
+            {
+                static const uno::Sequence<OUString> aSvxShape_FreeLineServices
+                        = { sUNO_service_drawing_OpenBezierShape,
+
+                            sUNO_service_drawing_Shape,
+                            sUNO_service_drawing_LineProperties,
+                            sUNO_service_drawing_FillProperties,
+
+                            sUNO_service_drawing_PolyPolygonBezierDescriptor,
+
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_FreeLineServices;
+            }
+
+        case SdrObjKind::FreehandFill:
+        case SdrObjKind::PathFill:
+            {
+                static const uno::Sequence<OUString> aSvxShape_FreeFillServices
+                        = { sUNO_service_drawing_ClosedBezierShape,
+
+                            sUNO_service_drawing_Shape,
+                            sUNO_service_drawing_LineProperties,
+                            sUNO_service_drawing_FillProperties,
+
+                            sUNO_service_drawing_PolyPolygonBezierDescriptor,
+
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_FreeFillServices;
+            }
+
+        case SdrObjKind::OutlineText:
+        case SdrObjKind::TitleText:
+        case SdrObjKind::Text:
+            {
+                static const uno::Sequence<OUString> aSvxShape_TextServices
+                        = { sUNO_service_drawing_TextShape,
+
+                            sUNO_service_drawing_Shape,
+                            sUNO_service_drawing_FillProperties,
+                            sUNO_service_drawing_LineProperties,
+
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_TextServices;
+            }
+
+        case SdrObjKind::Graphic:
+            {
+                static const uno::Sequence<OUString> aSvxShape_GrafServices
+                        = { sUNO_service_drawing_GraphicObjectShape,
+
+                            sUNO_service_drawing_Shape,
+
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor};
+                return aSvxShape_GrafServices;
+            }
+
+        case SdrObjKind::OLE2:
+            {
+                static const uno::Sequence<OUString> aSvxShape_Ole2Services
+                        = { sUNO_service_drawing_OLE2Shape,
+                            sUNO_service_drawing_Shape,
+
+                            // #i118485# Added Text, Shadow and Rotation
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_Ole2Services;
+            }
+
+        case SdrObjKind::Caption:
+            {
+                static const uno::Sequence<OUString> aSvxShape_CaptionServices
+                        = { sUNO_service_drawing_CaptionShape,
+
+                            sUNO_service_drawing_Shape,
+                            sUNO_service_drawing_FillProperties,
+                            sUNO_service_drawing_LineProperties,
+
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_CaptionServices;
+            }
+
+        case SdrObjKind::Page:
+            {
+                static const uno::Sequence<OUString> aSvxShape_PageServices
+                        = { sUNO_service_drawing_PageShape,
+                            sUNO_service_drawing_Shape };
+                return aSvxShape_PageServices;
+            }
+
+        case SdrObjKind::Measure:
+            {
+                static const uno::Sequence<OUString> aSvxShape_MeasureServices
+                        = { sUNO_service_drawing_MeasureShape,
+
+                            sUNO_service_drawing_MeasureProperties,
+
+                            sUNO_service_drawing_Shape,
+                            sUNO_service_drawing_LineProperties,
+
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_PolyPolygonDescriptor,
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_MeasureServices;
+            }
+
+        case SdrObjKind::OLEPluginFrame:
+            {
+                static const uno::Sequence<OUString> aSvxShape_FrameServices
+                        = { sUNO_service_drawing_FrameShape,
+                            sUNO_service_drawing_Shape };
+                return aSvxShape_FrameServices;
+            }
+
+        case SdrObjKind::UNO:
+            {
+                static const uno::Sequence<OUString> aSvxShape_UnoServices
+                        = { sUNO_service_drawing_ControlShape,
+                            sUNO_service_drawing_Shape };
+                return aSvxShape_UnoServices;
+            }
+
+        case SdrObjKind::Edge:
+            {
+                static const uno::Sequence<OUString> aSvxShape_EdgeServices
+                        = { sUNO_service_drawing_ConnectorShape,
+                            sUNO_service_drawing_ConnectorProperties,
+
+                            sUNO_service_drawing_Shape,
+                            sUNO_service_drawing_LineProperties,
+
+                            sUNO_service_drawing_Text,
+                            sUNO_service_drawing_TextProperties,
+                            sUNO_service_style_ParagraphProperties,
+                            sUNO_service_style_ParagraphPropertiesComplex,
+                            sUNO_service_style_ParagraphPropertiesAsian,
+                            sUNO_service_style_CharacterProperties,
+                            sUNO_service_style_CharacterPropertiesComplex,
+                            sUNO_service_style_CharacterPropertiesAsian,
+
+                            sUNO_service_drawing_PolyPolygonDescriptor,
+                            sUNO_service_drawing_ShadowProperties,
+                            sUNO_service_drawing_RotationDescriptor };
+                return aSvxShape_EdgeServices;
+            }
+        case SdrObjKind::Media:
+            {
+                static const uno::Sequence<OUString> aSvxShape_MediaServices
+                        = { sUNO_service_drawing_MediaShape,
+                            sUNO_service_drawing_Shape };
+                return aSvxShape_MediaServices;
+            }
+        default: ;
+        }
+    }
+    else if( HasSdrObject() && GetSdrObject()->GetObjInventor() == SdrInventor::FmForm)
+    {
+#if OSL_DEBUG_LEVEL > 0
+        const SdrObjKind nIdent = GetSdrObject()->GetObjIdentifier();
+        OSL_ENSURE( nIdent == SdrObjKind::UNO, "SvxShape::_getSupportedServiceNames: SdrInventor::FmForm, but no UNO object?" );
+#endif
+        static const uno::Sequence<OUString> aSvxShape_UnoServices
+                = { sUNO_service_drawing_ControlShape,
+                    sUNO_service_drawing_Shape };
+        return aSvxShape_UnoServices;
+    }
+    OSL_FAIL( "SvxShape::_getSupportedServiceNames: could not determine object type!" );
+    uno::Sequence< OUString > aSeq;
+    return aSeq;
+}
+
+sal_Bool SAL_CALL SvxShape::supportsService( const OUString& ServiceName )
+{
+    return cppu::supportsService(this, ServiceName);
+}
+
+// XGluePointsSupplier
+uno::Reference< container::XIndexContainer > SAL_CALL SvxShape::getGluePoints()
+{
+    ::SolarMutexGuard aGuard;
+    uno::Reference< container::XIndexContainer > xGluePoints( mxGluePoints );
+
+    if( HasSdrObject() && !xGluePoints.is() )
+    {
+        uno::Reference< container::XIndexContainer > xNew( SvxUnoGluePointAccess_createInstance( GetSdrObject() ), uno::UNO_QUERY );
+        mxGluePoints = xGluePoints = xNew;
+    }
+
+    return xGluePoints;
+}
+
+// XChild
+uno::Reference<uno::XInterface> SAL_CALL SvxShape::getParent()
+{
+    ::SolarMutexGuard aGuard;
+    const SdrObject* pSdrObject(GetSdrObject());
+
+    if(nullptr != pSdrObject)
+    {
+        const SdrObjList* pParentSdrObjList(GetSdrObject()->getParentSdrObjListFromSdrObject());
+
+        if(nullptr != pParentSdrObjList)
+        {
+            // SdrObject is member of a SdrObjList. That may be a SdrObject
+            // (SdrObjGroup or E3dScene) or a SdrPage.
+            // Check for SdrObject first - using getSdrPageFromSdrObjList
+            // *will* get the SdrPage even when the SdrObject is deep buried
+            // in a construct of SdrObjGroup.
+            // We want to ask for the direct parent here...
+            SdrObject* pParentSdrObject(pParentSdrObjList->getSdrObjectFromSdrObjList());
+
+            if(nullptr != pParentSdrObject)
+            {
+                // SdrObject is member of a SdrObject-based Group (SdrObjGroup or E3dScene).
+                return pParentSdrObject->getUnoShape();
+            }
+            else
+            {
+                SdrPage* pParentSdrPage(pParentSdrObjList->getSdrPageFromSdrObjList());
+
+                if(nullptr != pParentSdrPage)
+                {
+                    // SdrObject is inserted to a SdrPage. Since
+                    // we checked for getSdrObjectFromSdrObjList first,
+                    // we can even say that it is directly member of that
+                    // SdrPage.
+                    return pParentSdrPage->getUnoPage();
+                }
+            }
+
+            // not member of any SdrObjList, no parent
+            OSL_FAIL( "SvxShape::getParent(  ): unexpected Parent SdrObjList" );
+        }
+    }
+
+    // no SdrObject, no parent
+    return uno::Reference<uno::XInterface>();
+}
+
+void SAL_CALL SvxShape::setParent( const css::uno::Reference< css::uno::XInterface >& )
+{
+    throw lang::NoSupportException();
+}
+
+
+/** called from the XActionLockable interface methods on initial locking */
+void SvxShape::lock()
+{
+}
+
+
+/** called from the XActionLockable interface methods on final unlock */
+void SvxShape::unlock()
+{
+}
+
+
+// XActionLockable
+sal_Bool SAL_CALL SvxShape::isActionLocked(  )
+{
+    ::SolarMutexGuard aGuard;
+
+    return mnLockCount != 0;
+}
+
+
+void SAL_CALL SvxShape::addActionLock(  )
+{
+    ::SolarMutexGuard aGuard;
+
+    DBG_ASSERT( mnLockCount < 0xffff, "lock overflow in SvxShape!" );
+    mnLockCount++;
+
+    if( mnLockCount == 1 )
+        lock();
+}
+
+
+void SAL_CALL SvxShape::removeActionLock(  )
+{
+    ::SolarMutexGuard aGuard;
+
+    DBG_ASSERT( mnLockCount > 0, "lock underflow in SvxShape!" );
+    mnLockCount--;
+
+    if( mnLockCount == 0 )
+        unlock();
+}
+
+
+void SAL_CALL SvxShape::setActionLocks( sal_Int16 nLock )
+{
+    ::SolarMutexGuard aGuard;
+
+    if( (mnLockCount == 0) && (nLock != 0) )
+        unlock();
+
+    if( (mnLockCount != 0) && (nLock == 0) )
+        lock();
+
+    mnLockCount = static_cast<sal_uInt16>(nLock);
+}
+
+
+sal_Int16 SAL_CALL SvxShape::resetActionLocks(  )
+{
+    ::SolarMutexGuard aGuard;
+
+    if( mnLockCount != 0 )
+        unlock();
+
+    sal_Int16 nOldLocks = static_cast<sal_Int16>(mnLockCount);
+    mnLockCount = 0;
+
+    return nOldLocks;
+}
+
+
+/** since polygon shapes can change their kind during editing, we have
+    to recheck it here.
+    Circle shapes also change their kind, but they are all treated equal
+    so no update is necessary.
+*/
+void SvxShape::updateShapeKind()
+{
+    switch( mpImpl->mnObjId )
+    {
+        case SdrObjKind::Line:
+        case SdrObjKind::Polygon:
+        case SdrObjKind::PolyLine:
+        case SdrObjKind::PathLine:
+        case SdrObjKind::PathFill:
+        case SdrObjKind::FreehandLine:
+        case SdrObjKind::FreehandFill:
+        case SdrObjKind::PathPoly:
+        case SdrObjKind::PathPolyLine:
+        {
+            const SdrObjKind nId = GetSdrObject()->GetObjIdentifier();
+
+            if( nId != mpImpl->mnObjId )
+            {
+                mpImpl->mnObjId = nId;
+
+            }
+            break;
+        }
+        default: ;
+    }
+}
+
+SvxShapeText::SvxShapeText(SdrObject* pObject)
+: SvxShape( pObject, getSvxMapProvider().GetMap(SVXMAP_TEXT), getSvxMapProvider().GetPropertySet(SVXMAP_TEXT, SdrObject::GetGlobalDrawObjectItemPool()) ), SvxUnoTextBase( ImplGetSvxUnoOutlinerTextCursorSvxPropertySet() )
+{
+    if( pObject )
+        SetEditSource( new SvxTextEditSource( pObject, nullptr ) );
+}
+
+
+SvxShapeText::SvxShapeText(SdrObject* pObject, const SfxItemPropertyMapEntry* pPropertyMap, const SvxItemPropertySet* pPropertySet)
+: SvxShape( pObject, pPropertyMap, pPropertySet ), SvxUnoTextBase( ImplGetSvxUnoOutlinerTextCursorSvxPropertySet() )
+{
+    if( pObject )
+        SetEditSource( new SvxTextEditSource( pObject, nullptr ) );
+}
+
+
+SvxShapeText::~SvxShapeText() noexcept
+{
+    // check if only this instance is registered at the ranges
+    DBG_ASSERT( (nullptr == GetEditSource()) || (GetEditSource()->getRanges().size()==1),
+        "svx::SvxShapeText::~SvxShapeText(), text shape with living text ranges destroyed!");
+}
+
+void SvxShapeText::Create( SdrObject* pNewObj, SvxDrawPage* pNewPage )
+{
+    if( pNewObj && (nullptr == GetEditSource()))
+        SetEditSource( new SvxTextEditSource( pNewObj, nullptr ) );
+    SvxShape::Create( pNewObj, pNewPage );
+}
+
+// XInterface
+
+uno::Any SAL_CALL SvxShapeText::queryInterface( const uno::Type & rType )
+{
+    return SvxShape::queryInterface( rType );
+}
+
+
+uno::Any SAL_CALL SvxShapeText::queryAggregation( const uno::Type & rType )
+{
+    uno::Any aAny( SvxShape::queryAggregation( rType ) );
+    if( aAny.hasValue() )
+        return aAny;
+
+    return SvxUnoTextBase::queryAggregation( rType );
+}
+
+
+// XServiceInfo
+
+OUString SAL_CALL SvxShapeText::getImplementationName()
+{
+    return "SvxShapeText";
+}
+
+
+uno::Sequence< OUString > SAL_CALL SvxShapeText::getSupportedServiceNames()
+{
+    return SvxShape::getSupportedServiceNames();
+}
+
+
+sal_Bool SAL_CALL SvxShapeText::supportsService( const OUString& ServiceName )
+{
+    return cppu::supportsService(static_cast<SvxShape*>(this), ServiceName);
+}
+
+    // XTypeProvider
+
+uno::Sequence< uno::Type > SAL_CALL SvxShapeText::getTypes()
+{
+    return SvxShape::getTypes();
+}
+
+sal_Int64 SAL_CALL SvxShapeText::getSomething( const css::uno::Sequence< sal_Int8 >& rId )
+{
+    const sal_Int64 nReturn = SvxShape::getSomething( rId );
+    if( nReturn )
+        return nReturn;
+
+    return SvxUnoTextBase::getSomething( rId );
+}
+
+
+uno::Sequence< sal_Int8 > SAL_CALL SvxShapeText::getImplementationId()
+{
+    return css::uno::Sequence<sal_Int8>();
+}
+
+
+/** called from the XActionLockable interface methods on initial locking */
+void SvxShapeText::lock()
+{
+    SvxTextEditSource* pEditSource = static_cast<SvxTextEditSource*>(GetEditSource());
+    if( pEditSource )
+        pEditSource->lock();
+}
+
+
+/** called from the XActionLockable interface methods on final unlock */
+void SvxShapeText::unlock()
+{
+    SvxTextEditSource* pEditSource = static_cast<SvxTextEditSource*>(GetEditSource());
+    if( pEditSource )
+        pEditSource->unlock();
+}
+
+// css::text::XTextRange
+uno::Reference< text::XTextRange > SAL_CALL SvxShapeText::getStart()
+{
+    ::SolarMutexGuard aGuard;
+    SvxTextForwarder* pForwarder = mpEditSource ? mpEditSource->GetTextForwarder() : nullptr;
+    if( pForwarder )
+        ::GetSelection( maSelection, pForwarder );
+    return SvxUnoTextBase::getStart();
+
+}
+
+uno::Reference< text::XTextRange > SAL_CALL SvxShapeText::getEnd()
+{
+    ::SolarMutexGuard aGuard;
+    SvxTextForwarder* pForwarder = mpEditSource ? mpEditSource->GetTextForwarder() : nullptr;
+    if( pForwarder )
+        ::GetSelection( maSelection, pForwarder );
+    return SvxUnoTextBase::getEnd();
+}
+
+OUString SAL_CALL SvxShapeText::getString()
+{
+    ::SolarMutexGuard aGuard;
+    SvxTextForwarder* pForwarder = mpEditSource ? mpEditSource->GetTextForwarder() : nullptr;
+    if( pForwarder )
+        ::GetSelection( maSelection, pForwarder );
+    return SvxUnoTextBase::getString();
+}
+
+
+void SAL_CALL SvxShapeText::setString( const OUString& aString )
+{
+    ::SolarMutexGuard aGuard;
+    SvxTextForwarder* pForwarder = mpEditSource ? mpEditSource->GetTextForwarder() : nullptr;
+    if( pForwarder )
+        ::GetSelection( maSelection, pForwarder );
+    SvxUnoTextBase::setString( aString );
+}
+
+// override these for special property handling in subcasses. Return true if property is handled
+bool SvxShapeText::setPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, const css::uno::Any& rValue )
+{
+    // HACK-fix #99090#
+    // since SdrTextObj::SetVerticalWriting exchanges
+    // SDRATTR_TEXT_AUTOGROWWIDTH and SDRATTR_TEXT_AUTOGROWHEIGHT,
+    // we have to set the textdirection here
+
+    if( pProperty->nWID == SDRATTR_TEXTDIRECTION )
+    {
+        SdrTextObj* pTextObj = dynamic_cast< SdrTextObj* >( GetSdrObject() );
+        if( pTextObj )
+        {
+            css::text::WritingMode eMode;
+            if( rValue >>= eMode )
+            {
+                pTextObj->SetVerticalWriting( eMode == css::text::WritingMode_TB_RL );
+            }
+        }
+        return true;
+    }
+    return SvxShape::setPropertyValueImpl( rName, pProperty, rValue );
+}
+
+bool SvxShapeText::getPropertyValueImpl( const OUString& rName, const SfxItemPropertyMapEntry* pProperty, css::uno::Any& rValue )
+{
+    if( pProperty->nWID == SDRATTR_TEXTDIRECTION )
+    {
+        SdrTextObj* pTextObj = dynamic_cast< SdrTextObj* >( GetSdrObject() );
+        if( pTextObj && pTextObj->IsVerticalWriting() )
+            rValue <<= css::text::WritingMode_TB_RL;
+        else
+            rValue <<= css::text::WritingMode_LR_TB;
+        return true;
+    }
+
+    return SvxShape::getPropertyValueImpl( rName, pProperty, rValue );
+}
+
+bool SvxShapeText::getPropertyStateImpl( const SfxItemPropertyMapEntry* pProperty, css::beans::PropertyState& rState )
+{
+    return SvxShape::getPropertyStateImpl( pProperty, rState );
+}
+
+bool SvxShapeText::setPropertyToDefaultImpl( const SfxItemPropertyMapEntry* pProperty )
+{
+    return SvxShape::setPropertyToDefaultImpl( pProperty );
+}
+
+SvxShapeRect::SvxShapeRect(SdrObject* pObj)
+: SvxShapeText( pObj, getSvxMapProvider().GetMap(SVXMAP_SHAPE), getSvxMapProvider().GetPropertySet(SVXMAP_SHAPE, SdrObject::GetGlobalDrawObjectItemPool()))
+{
+}
+
+SvxShapeRect::~SvxShapeRect() noexcept
+{
+}
+
+uno::Any SAL_CALL SvxShapeRect::queryInterface( const uno::Type & rType )
+{
+    return SvxShapeText::queryInterface( rType );
+}
+
+uno::Any SAL_CALL SvxShapeRect::queryAggregation( const uno::Type & rType )
+{
+    return SvxShapeText::queryAggregation( rType );
+}
+
+// XServiceInfo
+
+uno::Sequence< OUString > SvxShapeRect::getSupportedServiceNames()
+{
+    return SvxShape::getSupportedServiceNames();
+}
+
+/** returns a StarOffice API wrapper for the given SdrObject */
+uno::Reference< drawing::XShape > GetXShapeForSdrObject( SdrObject* pObj ) noexcept
+{
+    uno::Reference< drawing::XShape > xShape( pObj->getUnoShape(), uno::UNO_QUERY );
+    return xShape;
+}
+
+
+SdrObject* SdrObject::getSdrObjectFromXShape( const css::uno::Reference< css::uno::XInterface >& xInt )
+{
+    SvxShape* pSvxShape = comphelper::getFromUnoTunnel<SvxShape>( xInt );
+    return pSvxShape ? pSvxShape->GetSdrObject() : nullptr;
+}
+
+uno::Any SvxItemPropertySet_getPropertyValue( const SfxItemPropertyMapEntry* pMap, const SfxItemSet& rSet )
+{
+    if(!pMap || !pMap->nWID)
+        return uno::Any();
+
+    // Check is for items that store either metric values if they are positive or percentage if they are negative.
+    bool bDontConvertNegativeValues = ( pMap->nWID == XATTR_FILLBMP_SIZEX || pMap->nWID == XATTR_FILLBMP_SIZEY );
+    return SvxItemPropertySet::getPropertyValue( pMap, rSet, (pMap->nWID != SDRATTR_XMLATTRIBUTES), bDontConvertNegativeValues );
+}
+
+void SvxItemPropertySet_setPropertyValue( const SfxItemPropertyMapEntry* pMap, const uno::Any& rVal, SfxItemSet& rSet )
+{
+    if(!pMap || !pMap->nWID)
+        return;
+
+    bool bDontConvertNegativeValues = ( pMap->nWID == XATTR_FILLBMP_SIZEX || pMap->nWID == XATTR_FILLBMP_SIZEY );
+    SvxItemPropertySet::setPropertyValue( pMap, rVal, rSet, bDontConvertNegativeValues );
+}
+
+/* vim:set shiftwidth=4 softtabstop=4 expandtab: */