diff options
Diffstat (limited to 'include/osl/file.h')
| -rw-r--r-- | include/osl/file.h | 1677 |
1 files changed, 1677 insertions, 0 deletions
diff --git a/include/osl/file.h b/include/osl/file.h new file mode 100644 index 000000000..07d2beb2a --- /dev/null +++ b/include/osl/file.h @@ -0,0 +1,1677 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +/* + * This file is part of LibreOffice published API. + */ + +#ifndef INCLUDED_OSL_FILE_H +#define INCLUDED_OSL_FILE_H + +#include "sal/config.h" + +#include "osl/time.h" +#include "rtl/ustring.h" +#include "sal/saldllapi.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** @file + +Main goals and usage hints + +The main intention of this interface is to provide a universal portable and +high performance access to file system functionality on any operating +system. + +There are a few main goals: + +1. The path specifications always has to be absolute. Any usage of relative +path specifications is forbidden. Exceptions are osl_getSystemPathFromFileURL, +osl_getFileURLFromSystemPath and osl_getAbsoluteFileURL. Most operating +systems provide a "Current Directory" per process. This is the reason why +relative path specifications can cause problems in multithreading +environments. + +2. Proprietary notations of file paths are not supported. Every path notation +must the file URL specification. File URLs must be encoded in UTF8 and after +that escaped. Although the URL parameter is a unicode string, the must +contain only ASCII characters. + +3. The caller cannot get any information whether a file system is case +sensitive, case preserving or not. The operating system implementation +itself should determine if it can map case-insensitive paths. The case +correct notation of a filename or file path is part of the "File Info". This +case correct name can be used as a unique key if necessary. + +4. Obtaining information about files or volumes is controlled by a bitmask +which specifies which fields are of interest. Due to performance reasons it +is not recommended to obtain information which is not needed. But if the +operating system provides more information anyway the implementation can set +more fields on output as were requested. It is in the responsibility of the +caller to decide if they use this additional information or not. But they +should do so to prevent further unnecessary calls if the information is +already there. + +The input bitmask supports a flag osl_FileStatus_Mask_Validate which can be +used to force retrieving uncached validated information. Setting this flag +when calling osl_getFileStatus in combination with no other flag is a synonym +for a "FileExists". This should only be done when processing a single file +(i.e. before opening) and NEVER during enumeration of directory contents on +any step of information processing. This would change the runtime behaviour +from O(n) to O(n*n/2) on nearly every file system. On Windows NT reading the +contents of a directory with 7000 entries and getting full information about +every file only takes 0.6 seconds. Specifying the flag +osl_FileStatus_Mask_Validate for each entry will increase the time to 180 +seconds (!!!). + +*/ + +/* Error codes according to errno */ +typedef enum { + osl_File_E_None, /*!< on success */ + osl_File_E_PERM, /*!< operation not permitted */ + osl_File_E_NOENT, /*!< no such file or directory */ + osl_File_E_SRCH, /*!< no process matches the PID */ + osl_File_E_INTR, /*!< function call was interrupted */ + osl_File_E_IO, /*!< I/O error occurred */ + osl_File_E_NXIO, /*!< no such device or address */ + osl_File_E_2BIG, /*!< argument list too long */ + osl_File_E_NOEXEC, /*!< invalid executable file format */ + osl_File_E_BADF, /*!< bad file descriptor */ + osl_File_E_CHILD, /*!< there are no child processes */ + osl_File_E_AGAIN, /*!< resource temp unavailable, try again later */ + osl_File_E_NOMEM, /*!< no memory available */ + osl_File_E_ACCES, /*!< file permissions do not allow operation */ + osl_File_E_FAULT, /*!< bad address; an invalid pointer detected */ + osl_File_E_BUSY, /*!< resource busy */ + osl_File_E_EXIST, /*!< file exists where should only be created */ + osl_File_E_XDEV, /*!< improper link across file systems detected */ + osl_File_E_NODEV, /*!< wrong device type specified */ + osl_File_E_NOTDIR, /*!< file isn't a directory where one is needed */ + osl_File_E_ISDIR, /*!< file is a directory, invalid operation */ + osl_File_E_INVAL, /*!< invalid argument to library function */ + osl_File_E_NFILE, /*!< too many distinct file openings */ + osl_File_E_MFILE, /*!< process has too many distinct files open */ + osl_File_E_NOTTY, /*!< inappropriate I/O control operation */ + osl_File_E_FBIG, /*!< file too large */ + osl_File_E_NOSPC, /*!< no space left on device, write failed */ + osl_File_E_SPIPE, /*!< invalid seek operation (such as on pipe) */ + osl_File_E_ROFS, /*!< illegal modification to read-only filesystem */ + osl_File_E_MLINK, /*!< too many links to file */ + osl_File_E_PIPE, /*!< broken pipe; no process reading from other end of pipe */ + osl_File_E_DOM, /*!< domain error (mathematical error) */ + osl_File_E_RANGE, /*!< range error (mathematical error) */ + osl_File_E_DEADLK, /*!< deadlock avoided */ + osl_File_E_NAMETOOLONG, /*!< filename too long */ + osl_File_E_NOLCK, /*!< no locks available */ + osl_File_E_NOSYS, /*!< function not implemented */ + osl_File_E_NOTEMPTY, /*!< directory not empty */ + osl_File_E_LOOP, /*!< too many levels of symbolic links found during name lookup */ + osl_File_E_ILSEQ, /*!< invalid or incomplete byte sequence of multibyte char found */ + osl_File_E_NOLINK, /*!< link has been severed */ + osl_File_E_MULTIHOP, /*!< remote resource is not directly available */ + osl_File_E_USERS, /*!< file quote system is confused as there are too many users */ + osl_File_E_OVERFLOW, /*!< value too large for defined data type */ + osl_File_E_NOTREADY, /*!< device not ready */ + osl_File_E_invalidError, /*!< unmapped error: always last entry in enum! */ + osl_File_E_TIMEDOUT, /*!< socket operation timed out */ + osl_File_E_NETWORK, /*!< unexpected network error occurred (Windows) - could be a + user session was deleted, or an unexpected network error + occurred */ + osl_File_E_FORCE_EQUAL_SIZE = SAL_MAX_ENUM +} oslFileError; + +typedef void *oslDirectory; +typedef void *oslDirectoryItem; + +/** Open a directory for enumerating its contents. + + @param[in] pustrDirectoryURL + The full qualified URL of the directory. + + @param[out] pDirectory + On success it receives a handle used for subsequent calls by osl_getNextDirectoryItem(). + The handle has to be released by a call to osl_closeDirectory(). + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOENT the specified path doesn't exist + @retval osl_File_E_NOTDIR the specified path is not a directory + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_MFILE too many open files used by the process + @retval osl_File_E_NFILE too many open files in the system + @retval osl_File_E_NAMETOOLONG File name too long + @retval osl_File_E_LOOP Too many symbolic links encountered + + @see osl_getNextDirectoryItem() + @see osl_closeDirectory() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_openDirectory( + rtl_uString *pustrDirectoryURL, oslDirectory *pDirectory); + +/** Retrieve the next item of a previously opened directory. + + Retrieves the next item of a previously opened directory. + All handles have an initial refcount of 1. + + @param[in] Directory + A directory handle received from a previous call to osl_openDirectory(). + + @param[out] pItem + On success it receives a handle that can be used for subsequent calls to osl_getFileStatus(). + The handle has to be released by a call to osl_releaseDirectoryItem(). + + @param[in] uHint + With this parameter the caller can tell the implementation that (s)he + is going to call this function uHint times afterwards. This enables the implementation to + get the information for more than one file and cache it until the next calls. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_NOENT no more entries in this directory + @retval osl_File_E_BADF invalid oslDirectory parameter + @retval osl_File_E_OVERFLOW the value too large for defined data type + + @see osl_releaseDirectoryItem() + @see osl_acquireDirectoryItem() + @see osl_getDirectoryItem() + @see osl_getFileStatus() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_getNextDirectoryItem( + oslDirectory Directory, + oslDirectoryItem *pItem, + sal_uInt32 uHint + ); + +/** Release a directory handle. + + @param[in] Directory + A handle received by a call to osl_openDirectory(). + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_BADF invalid oslDirectory parameter + @retval osl_File_E_INTR the function call was interrupted + + @see osl_openDirectory() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_closeDirectory( + oslDirectory Directory); + +/** Retrieve a single directory item. + + Retrieves a single directory item. The returned handle has an initial refcount of 1. + Due to performance issues it is not recommended to use this function while + enumerating the contents of a directory. In this case use osl_getNextDirectoryItem() instead. + + @param[in] pustrFileURL + An absolute file URL. + + @param[out] pItem + On success it receives a handle which can be used for subsequent calls to osl_getFileStatus(). + The handle has to be released by a call to osl_releaseDirectoryItem(). + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_MFILE too many open files used by the process + @retval osl_File_E_NFILE too many open files in the system + @retval osl_File_E_NOENT no such file or directory + @retval osl_File_E_LOOP too many symbolic links encountered + @retval osl_File_E_NAMETOOLONG the file name is too long + @retval osl_File_E_NOTDIR a component of the path prefix of path is not a directory + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_MULTIHOP multihop attempted + @retval osl_File_E_NOLINK link has been severed + @retval osl_File_E_FAULT bad address + @retval osl_File_E_INTR the function call was interrupted + + @see osl_releaseDirectoryItem() + @see osl_acquireDirectoryItem() + @see osl_getFileStatus() + @see osl_getNextDirectoryItem() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_getDirectoryItem( + rtl_uString *pustrFileURL, + oslDirectoryItem *pItem + ); + +/** Increase the refcount of a directory item handle. + + The caller responsible for releasing the directory item handle using osl_releaseDirectoryItem(). + + @param[in] Item + A handle received by a call to osl_getDirectoryItem() or osl_getNextDirectoryItem(). + + @retval osl_File_E_None on success + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_INVAL the format of the parameters was not valid + + @see osl_getDirectoryItem() + @see osl_getNextDirectoryItem() + @see osl_releaseDirectoryItem() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_acquireDirectoryItem( + oslDirectoryItem Item ); + + +/** Decrease the refcount of a directory item handle. + + Decreases the refcount of a directory item handle. + If the refcount reaches 0 the data associated with + this directory item handle will be released. + + @param[in] Item + A handle received by a call to osl_getDirectoryItem() or osl_getNextDirectoryItem(). + + @retval osl_File_E_None on success + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_INVAL the format of the parameters was not valid + + @see osl_getDirectoryItem() + @see osl_getNextDirectoryItem() + @see osl_acquireDirectoryItem() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_releaseDirectoryItem( + oslDirectoryItem Item ); + +/** Determine if two directory items point the same underlying file + + The comparison is done first by URL, and then by resolving links to + find the target, and finally by comparing inodes on unix. + + @param[in] pItemA + A directory handle to compare with another handle + + @param[in] pItemB + A directory handle to compare with pItemA + + @retval sal_True if the items point to an identical resource + @retval sal_False if the items point to a different resource, or a fatal error occurred + + @see osl_getDirectoryItem() + + @since LibreOffice 3.6 +*/ +SAL_DLLPUBLIC sal_Bool SAL_CALL osl_identicalDirectoryItem( + oslDirectoryItem pItemA, + oslDirectoryItem pItemB ); + +/** + @defgroup filetype File types + + @{ + */ +typedef enum { + osl_File_Type_Directory, /*< directory */ + osl_File_Type_Volume, /*< volume (e.g. C:, A:) */ + osl_File_Type_Regular, /*< regular file */ + osl_File_Type_Fifo, /*< named pipe */ + osl_File_Type_Socket, /*< socket */ + osl_File_Type_Link, /*< file link */ + osl_File_Type_Special, /*< special device file */ + osl_File_Type_Unknown /*< unknown file type */ +} oslFileType; +/** @} */ + +/** + @defgroup fileattrs File attributes + + @{ + */ +#define osl_File_Attribute_ReadOnly 0x00000001 +#define osl_File_Attribute_Hidden 0x00000002 +#define osl_File_Attribute_Executable 0x00000010 +#define osl_File_Attribute_GrpWrite 0x00000020 +#define osl_File_Attribute_GrpRead 0x00000040 +#define osl_File_Attribute_GrpExe 0x00000080 +#define osl_File_Attribute_OwnWrite 0x00000100 +#define osl_File_Attribute_OwnRead 0x00000200 +#define osl_File_Attribute_OwnExe 0x00000400 +#define osl_File_Attribute_OthWrite 0x00000800 +#define osl_File_Attribute_OthRead 0x00001000 +#define osl_File_Attribute_OthExe 0x00002000 +/** @} */ + +/** + @defgroup filestatus Flags specifying which fields to retrieve by osl_getFileStatus + + @{ + */ +#define osl_FileStatus_Mask_Type 0x00000001 +#define osl_FileStatus_Mask_Attributes 0x00000002 +#define osl_FileStatus_Mask_CreationTime 0x00000010 +#define osl_FileStatus_Mask_AccessTime 0x00000020 +#define osl_FileStatus_Mask_ModifyTime 0x00000040 +#define osl_FileStatus_Mask_FileSize 0x00000080 +#define osl_FileStatus_Mask_FileName 0x00000100 +#define osl_FileStatus_Mask_FileURL 0x00000200 +#define osl_FileStatus_Mask_LinkTargetURL 0x00000400 +#define osl_FileStatus_Mask_All 0x7FFFFFFF +#define osl_FileStatus_Mask_Validate 0x80000000 +/** @} */ + +/** Structure containing information about files and directories + + @see osl_getFileStatus() + @see oslFileType +*/ +typedef struct _oslFileStatus { +/** Must be initialized with the size in bytes of the structure before passing it to any function */ + sal_uInt32 uStructSize; +/** Determines which members of the structure contain valid data */ + sal_uInt32 uValidFields; +/** The type of the file (file, directory, volume). */ + oslFileType eType; +/** File attributes */ + sal_uInt64 uAttributes; +/** First creation time in nanoseconds since 1/1/1970. Can be the last modify time depending on + platform or file system. */ + TimeValue aCreationTime; +/** Last access time in nanoseconds since 1/1/1970. Can be the last modify time depending on + platform or file system. */ + TimeValue aAccessTime; +/** Last modify time in nanoseconds since 1/1/1970. */ + TimeValue aModifyTime; +/** Size in bytes of the file. Zero for directories and volumes. */ + sal_uInt64 uFileSize; +/** Case correct name of the file. Should be set to zero before calling osl_getFileStatus + and released after usage. */ + rtl_uString *ustrFileName; +/** Full URL of the file. Should be set to zero before calling osl_getFileStatus + and released after usage. */ + rtl_uString *ustrFileURL; +/** Full URL of the target file if the file itself is a link. + Should be set to zero before calling osl_getFileStatus + and released after usage. */ + rtl_uString *ustrLinkTargetURL; +} oslFileStatus; + +/** Retrieve information about a single file or directory. + + @param[in] Item + A handle received by a previous call to osl_getDirectoryItem() or osl_getNextDirectoryItem(). + + @param[in,out] pStatus + Points to a structure which receives the information of the file or directory + represented by the handle Item. The member uStructSize has to be initialized to + sizeof(oslFileStatus) before calling this function. + + @param[in] uFieldMask + Specifies which fields of the structure pointed to by pStatus are of interest to the caller. + + @retval osl_File_E_None on success + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_LOOP too many symbolic links encountered + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_NOENT no such file or directory + @retval osl_File_E_NAMETOOLONG file name too long + @retval osl_File_E_BADF invalid oslDirectoryItem parameter + @retval osl_File_E_FAULT bad address + @retval osl_File_E_OVERFLOW value too large for defined data type + @retval osl_File_E_INTR function call was interrupted + @retval osl_File_E_NOLINK link has been severed + @retval osl_File_E_MULTIHOP components of path require hopping to multiple + remote machines and the file system does not allow it + @retval osl_File_E_MFILE too many open files used by the process + @retval osl_File_E_NFILE too many open files in the system + @retval osl_File_E_NOSPC no space left on device + @retval osl_File_E_NXIO no such device or address + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_NOSYS function not implemented + + @see osl_getDirectoryItem() + @see osl_getNextDirectoryItem() + @see oslFileStatus +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_getFileStatus( + oslDirectoryItem Item, oslFileStatus *pStatus, sal_uInt32 uFieldMask ); + +typedef void *oslVolumeDeviceHandle; + +/** Release a volume device handle. + + Releases the given oslVolumeDeviceHandle which was acquired by a call to + osl_getVolumeInformation() or osl_acquireVolumeDeviceHandle(). + + @param[in] Handle + An oslVolumeDeviceHandle received by a call to osl_getVolumeInformation(). + + @retval + osl_File_E_None on success + + @todo + specify all error codes that may be returned + + @see osl_acquireVolumeDeviceHandle() + @see osl_getVolumeInformation() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_releaseVolumeDeviceHandle( + oslVolumeDeviceHandle Handle ); + +/** Acquire a volume device handle. + + Acquires the given oslVolumeDeviceHandle which was acquired by a call to + osl_getVolumeInformation(). The caller is responsible for releasing the + acquired handle by calling osl_releaseVolumeDeviceHandle(). + + @param[in] Handle + An oslVolumeDeviceHandle received by a call to osl_getVolumeInformation(). + + @retval + osl_File_E_None on success + + @todo + specify all error codes that may be returned + + @see osl_getVolumeInformation() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_acquireVolumeDeviceHandle( + oslVolumeDeviceHandle Handle ); + +/** Get the full qualified URL where a device is mounted to. + + @param[in] Handle + An oslVolumeDeviceHandle received by a call to osl_getVolumeInformation(). + + @param[out] ppustrDirectoryURL + Receives the full qualified URL where the device is mounted to. + + @retval osl_File_E_None on success + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_NXIO no such device or address + @retval osl_File_E_NODEV no such device + @retval osl_File_E_NOENT no such file or directory + @retval osl_File_E_FAULT bad address + @retval osl_FilE_E_INTR function call was interrupted + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_MULTIHOP multihop attempted + @retval osl_File_E_NOLINK link has been severed + @retval osl_File_E_EOVERFLOW value too large for defined data type + + @see osl_getVolumeInformation() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_getVolumeDeviceMountPath( + oslVolumeDeviceHandle Handle, rtl_uString **ppustrDirectoryURL); + +/** + @defgroup volattrs Volume attributes + + @{ + */ +#define osl_Volume_Attribute_Removeable 0x00000001 +#define osl_Volume_Attribute_Remote 0x00000002 +#define osl_Volume_Attribute_CompactDisc 0x00000004 +#define osl_Volume_Attribute_FixedDisk 0x00000008 +#define osl_Volume_Attribute_RAMDisk 0x00000010 +#define osl_Volume_Attribute_FloppyDisk 0x00000020 + +#define osl_Volume_Attribute_Case_Is_Preserved 0x00000040 +#define osl_Volume_Attribute_Case_Sensitive 0x00000080 + +/** @} */ + +/** + @defgroup volinfoflags Flags specifying which fields to retrieve by osl_getVolumeInfo + + @{ + */ + +#define osl_VolumeInfo_Mask_Attributes 0x00000001 +#define osl_VolumeInfo_Mask_TotalSpace 0x00000002 +#define osl_VolumeInfo_Mask_UsedSpace 0x00000004 +#define osl_VolumeInfo_Mask_FreeSpace 0x00000008 +#define osl_VolumeInfo_Mask_MaxNameLength 0x00000010 +#define osl_VolumeInfo_Mask_MaxPathLength 0x00000020 +#define osl_VolumeInfo_Mask_FileSystemName 0x00000040 +#define osl_VolumeInfo_Mask_DeviceHandle 0x00000080 +#define osl_VolumeInfo_Mask_FileSystemCaseHandling 0x00000100 + +/** @} */ + +/** Structure containing information about volumes + + @see osl_getVolumeInformation() + @see oslFileType +*/ + +typedef struct _oslVolumeInfo { +/** Must be initialized with the size in bytes of the structure before + passing it to any function */ + sal_uInt32 uStructSize; +/** Determines which members of the structure contain valid data */ + sal_uInt32 uValidFields; +/** Attributes of the volume (remote and/or removable) */ + sal_uInt32 uAttributes; +/** Total available space on the volume for the current process/user */ + sal_uInt64 uTotalSpace; +/** Used space on the volume for the current process/user */ + sal_uInt64 uUsedSpace; +/** Free space on the volume for the current process/user */ + sal_uInt64 uFreeSpace; +/** Maximum length of file name of a single item */ + sal_uInt32 uMaxNameLength; +/** Maximum length of a full qualified path in system notation */ + sal_uInt32 uMaxPathLength; +/** Points to a string that receives the name of the file system type. String + should be set to zero before calling osl_getVolumeInformation and released + after usage. */ + rtl_uString *ustrFileSystemName; +/** Pointer to handle the receives underlying device. Handle should be set to + zero before calling osl_getVolumeInformation */ + oslVolumeDeviceHandle *pDeviceHandle; +} oslVolumeInfo; + +/** Retrieve information about a volume. + + Retrieves information about a volume. A volume can either be a mount point, a network + resource or a drive depending on Operating System and File System. Before calling this + function osl_getFileStatus() should be called to determine if the type is + osl_file_Type_Volume. + + @param[in] pustrDirectoryURL + Full qualified URL of the volume + + @param[out] pInfo + On success it receives information about the volume. + + @param[in] uFieldMask + Specifies which members of the structure should be filled + + @retval osl_File_E_None on success + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOTDIR not a directory + @retval osl_File_E_NAMETOOLONG file name too long + @retval osl_File_E_NOENT no such file or directory + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_LOOP too many symbolic links encountered + @retval ols_File_E_FAULT Bad address + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_NOSYS function not implemented + @retval osl_File_E_MULTIHOP multihop attempted + @retval osl_File_E_NOLINK link has been severed + @retval osl_File_E_INTR function call was interrupted + + @see osl_getFileStatus() + @see oslVolumeInfo +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_getVolumeInformation( + rtl_uString *pustrDirectoryURL, + oslVolumeInfo *pInfo, + sal_uInt32 uFieldMask ); + +typedef void *oslFileHandle; + +/* Open flags */ + +#define osl_File_OpenFlag_Read 0x00000001 +#define osl_File_OpenFlag_Write 0x00000002 +#define osl_File_OpenFlag_Create 0x00000004 +#define osl_File_OpenFlag_NoLock 0x00000008 +/* larger bit-fields reserved for internal use cf. detail/file.h */ + +/** Open a regular file. + + Open a file. Only regular files can be opened. + + @param[in] pustrFileURL + The full qualified URL of the file to open. + + @param[out] pHandle + On success it receives a handle to the open file. + + @param[in] uFlags + Specifies the open mode. + + On Android, if the file path is below the /assets folder, the file + exists only as a hopefully uncompressed element inside the app + package (.apk), which has been mapped into memory as a whole by + the LibreOffice Android bootstrapping code. So files "opened" from + there aren't actually files in the OS sense. + + @retval osl_File_E_None on success + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NAMETOOLONG pathname was too long + @retval osl_File_E_NOENT no such file or directory + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_AGAIN a write lock could not be established + @retval osl_File_E_NOTDIR not a directory + @retval osl_File_E_NXIO no such device or address + @retval osl_File_E_NODEV no such device + @retval osl_File_E_ROFS read-only file system + @retval osl_File_E_TXTBSY text file busy + @retval osl_File_E_FAULT bad address + @retval osl_File_E_LOOP too many symbolic links encountered + @retval osl_File_E_NOSPC no space left on device + @retval osl_File_E_ISDIR is a directory + @retval osl_File_E_MFILE too many open files used by the process + @retval osl_File_E_NFILE too many open files in the system + @retval osl_File_E_DQUOT quota exceeded + @retval osl_File_E_EXIST file exists + @retval osl_FilE_E_INTR function call was interrupted + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_MULTIHOP multihop attempted + @retval osl_File_E_NOLINK link has been severed + @retval osl_File_E_EOVERFLOW value too large for defined data type + + @see osl_closeFile() + @see osl_setFilePos() + @see osl_getFilePos() + @see osl_readFile() + @see osl_writeFile() + @see osl_setFileSize() + @see osl_getFileSize() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_openFile( + rtl_uString *pustrFileURL, oslFileHandle *pHandle, sal_uInt32 uFlags ); + +#define osl_Pos_Absolut 1 +#define osl_Pos_Current 2 +#define osl_Pos_End 3 + +/** Set the internal position pointer of an open file. + + @param[in] Handle + Handle to a file received by a previous call to osl_openFile(). + + @param[in] uHow + How to calculate the offset - osl_Pos_Absolut means start at the + beginning of the file, osl_Pos_Current means offset from the current + seek position and osl_Pos_End means the offset will be negative and + the position will be calculated backwards from the end of the file by + the offset provided. + + @param[in] uPos + Seek offset, depending on uHow. If uHow is osl_Pos_End then the value must be negative. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + (e.g. if uHow is osl_Pos_End then must be negative) + @retval osl_File_E_OVERFLOW the resulting file offset would be a + value which cannot be represented correctly for regular files + + @see osl_openFile() + @see osl_getFilePos() +*/ +SAL_WARN_UNUSED_RESULT SAL_DLLPUBLIC oslFileError SAL_CALL osl_setFilePos( + oslFileHandle Handle, sal_uInt32 uHow, sal_Int64 uPos ); + +/** Retrieve the current position of the internal pointer of an open file. + + @param[in] Handle + Handle to a file received by a previous call to osl_openFile(). + + @param[out] pPos + On success receives the current position of the file pointer. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_OVERFLOW the resulting file offset would be a value + which cannot be represented correctly for regular files + + @see osl_openFile() + @see osl_setFilePos() + @see osl_readFile() + @see osl_writeFile() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_getFilePos( + oslFileHandle Handle, sal_uInt64 *pPos ); + +/** Set the file size of an open file. + + Sets the file size of an open file. The file can be truncated or enlarged by the function. + The position of the file pointer is not affeced by this function. + + @param[in] Handle + Handle to a file received by a previous call to osl_openFile(). + + @param[in] uSize + New size in bytes. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_OVERFLOW the resulting file offset would be a value + which cannot be represented correctly for regular files + + @see osl_openFile() + @see osl_setFilePos() + @see osl_getFileStatus() + @see osl_getFileSize() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_setFileSize( + oslFileHandle Handle, sal_uInt64 uSize ); + +/** Get the file size of an open file. + + Gets the file size of an open file. + The position of the file pointer is not affeced by this function. + + @param[in] Handle + Handle to a file received by a previous call to osl_openFile(). + + @param[out] pSize + Current size in bytes. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_OVERFLOW the resulting file offset would be a value + which cannot be represented correctly for regular files + + @see osl_openFile() + @see osl_setFilePos() + @see osl_getFileStatus() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_getFileSize( + oslFileHandle Handle, sal_uInt64 *pSize ); + +/** Indicate that the file can be accessed randomly (i.e. there is no sequential + reading). Basically it means that the first byte of every page in the + file-mapping will be read. + + @since UDK 3.2.10 + */ +#define osl_File_MapFlag_RandomAccess ((sal_uInt32)(0x1)) + +/** Map flag denoting that the mapped address space will be accessed by the + process soon (and it is advantageous for the operating system to already + start paging in the data). + + @attention As this assumes that madvise() with the WILLREAD flag is + asynchronous (which is I'm afraid an incorrect assumption), Linux systems + will ignore this flag. + + @since UDK 3.2.12 +*/ +#define osl_File_MapFlag_WillNeed ((sal_uInt32)(0x2)) + +/** Map a shared file into memory. + + Files can be mapped into memory to allow multiple processes to use + this memory-mapped file to share data. + + On Android, if the Handle refers to a file that is actually inside + the app package (.apk zip archive), no new mapping is created, + just a pointer to the file inside the already mapped .apk is + returned. + + @param[in] Handle Handle of the file to be mapped. + @param[in,out] ppAddr Memory address of the mapped file + @param[in] uLength Amount to map of the file from the offset + @param[in] uOffset Offset into the file to map + @param[in] uFlags osl_File_MapFlag_RandomAccess or + osl_File_MapFlag_WillNeed + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL invalid file handle, on Unix systems also + can mean that the address, length of the file or the + file offset are too large or not aligned on a page + boundary; on Linux can also mean after Linux 2.6.12 + that the length was set to 0 (illogical). + @retval osl_File_E_OVERFLOW requested mapping size too large, + or the file offset was too large + @retval osl_File_E_ACCES file descriptor to non-regular file, or + file descriptor not open for reading, or the file + descriptor is not open in read/write mode + @retval osl_File_E_AGAIN file has been locked, or too much memory + has been locked + @retval osl_File_E_NODEV underlying filesystem of specified file + does not support memory mapping + @retval osl_File_E_TXTBSY on Linux means that writing to the mapped + file is denied, but the file descriptor points to a file + open for writing + @retval osl_File_E_NOMEM process's maximum number of mappings have + been exceeded + + @since UDK 3.2.10 +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_mapFile ( + oslFileHandle Handle, + void** ppAddr, + sal_uInt64 uLength, + sal_uInt64 uOffset, + sal_uInt32 uFlags +); + + +#ifndef ANDROID + +/** Unmap a shared file from memory. + + This function just won't work on Android in general where for + (uncompressed) files inside the .apk, per SDK conventions in the + /assets folder, osl_mapFile() returns a pointer to the file inside + the already by LibreOffice Android-specific bootstrapping code + mmapped .apk archive. We can't go and randomly munmap part of the + .apk archive. So this function is not present on Android. + + @since UDK 3.2.10 +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_unmapFile ( + void* pAddr, + sal_uInt64 uLength +); + +#endif + +/** Unmap a file segment from memory. + + Like osl_unmapFile(), but takes also the oslFileHandle argument + passed to osl_mapFile() when creating this mapping. + + On Android, for files below /assets, i.e. located inside the app + archive (.apk), this won't actually unmap anything; all the .apk + stays mapped. + + @since UDK 3.6 +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_unmapMappedFile ( + oslFileHandle Handle, + void* pAddr, + sal_uInt64 uLength +); + +/** Read a number of bytes from a file. + + Reads a number of bytes from a file. The internal file pointer is + increased by the number of bytes read. + + @param[in] Handle + Handle to a file received by a previous call to osl_openFile(). + + @param[out] pBuffer + Points to a buffer which receives data. The buffer must be large enough + to hold uBytesRequested bytes. + + @param[in] uBytesRequested + Number of bytes which should be retrieved. + + @param[out] pBytesRead + On success the number of bytes which have actually been retrieved. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_INTR function call was interrupted + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_ISDIR is a directory + @retval osl_File_E_BADF bad file + @retval osl_File_E_FAULT bad address + @retval osl_File_E_AGAIN operation would block + @retval osl_File_E_NOLINK link has been severed + + @see osl_openFile() + @see osl_writeFile() + @see osl_readLine() + @see osl_setFilePos() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_readFile( + oslFileHandle Handle, void *pBuffer, sal_uInt64 uBytesRequested, sal_uInt64 *pBytesRead ); + +/** Test if the end of a file is reached. + + @param[in] Handle + Handle to a file received by a previous call to osl_openFile(). + + @param[out] pIsEOF + Points to a variable that receives the end-of-file status. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_INTR function call was interrupted + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_ISDIR is a directory + @retval osl_File_E_BADF bad file + @retval osl_File_E_FAULT bad address + @retval osl_File_E_AGAIN operation would block + @retval osl_File_E_NOLINK link has been severed + + @see osl_openFile() + @see osl_readFile() + @see osl_readLine() + @see osl_setFilePos() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_isEndOfFile( + oslFileHandle Handle, sal_Bool *pIsEOF ); + +/** Write a number of bytes to a file. + + Writes a number of bytes to a file. + The internal file pointer is increased by the number of bytes read. + + @param[in] Handle + Handle to a file received by a previous call to osl_openFile(). + + @param[in] pBuffer + Points to a buffer which contains the data. + + @param[in] uBytesToWrite + Number of bytes which should be written. + + @param[out] pBytesWritten + On success the number of bytes which have actually been written. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_FBIG file too large + @retval osl_File_E_DQUOT quota exceeded + @retval osl_File_E_AGAIN operation would block + @retval osl_File_E_BADF bad file + @retval osl_File_E_FAULT bad address + @retval osl_File_E_INTR function call was interrupted + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_NOLCK no record locks available + @retval osl_File_E_NOLINK link has been severed + @retval osl_File_E_NOSPC no space left on device + @retval osl_File_E_NXIO no such device or address + + @see osl_openFile() + @see osl_readFile() + @see osl_setFilePos() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_writeFile( + oslFileHandle Handle, const void *pBuffer, sal_uInt64 uBytesToWrite, sal_uInt64 *pBytesWritten ); + +/** Read a number of bytes from a specified offset in a file. + + The current position of the internal file pointer may or may not be changed. + + @param[in] Handle + Handle to a file received by a previous call to osl_openFile(). + + @param[in] uOffset + Offset position from start of file where read starts + + @param[out] pBuffer + Points to a buffer which receives data. The buffer must be large enough + to hold uBytesRequested bytes. + + @param[in] uBytesRequested + Number of bytes which should be retrieved. + + @param[out] pBytesRead + On success the number of bytes which have actually been retrieved. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_INTR function call was interrupted + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_ISDIR is a directory + @retval osl_File_E_BADF bad file + @retval osl_File_E_FAULT bad address + @retval osl_File_E_AGAIN operation would block + @retval osl_File_E_NOLINK link has been severed + @since UDK 3.2.10 + */ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_readFileAt( + oslFileHandle Handle, + sal_uInt64 uOffset, + void* pBuffer, + sal_uInt64 uBytesRequested, + sal_uInt64* pBytesRead +); + +/** Write a number of bytes to a specified offset in a file. + + The current position of the internal file pointer may or may not be changed. + + @param[in] Handle + Handle to a file received by a previous call to osl_openFile(). + + @param[in] uOffset + Position of file to write into. + + @param[in] pBuffer + Points to a buffer which contains the data. + + @param[in] uBytesToWrite + Number of bytes which should be written. + + @param[out] pBytesWritten + On success the number of bytes which have actually been written. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_FBIG file too large + @retval osl_File_E_DQUOT quota exceeded + @retval osl_File_E_AGAIN operation would block + @retval osl_File_E_BADF bad file + @retval osl_File_E_FAULT bad address + @retval osl_File_E_INTR function call was interrupted + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_NOLCK no record locks available + @retval osl_File_E_NOLINK link has been severed + @retval osl_File_E_NOSPC no space left on device + @retval osl_File_E_NXIO no such device or address + @since UDK 3.2.10 +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_writeFileAt( + oslFileHandle Handle, + sal_uInt64 uOffset, + const void* pBuffer, + sal_uInt64 uBytesToWrite, + sal_uInt64* pBytesWritten +); + +/** Read a line from a file. + + Reads a line from a file. The new line delimiter is NOT returned! + + @param[in] Handle + Handle to a file received by a previous call to osl_openFile(). + + @param[in,out] ppSequence + A pointer pointer to a sal_Sequence that will hold the line read on success. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_INTR function call was interrupted + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_ISDIR is a directory + @retval osl_File_E_BADF bad file + @retval osl_File_E_FAULT bad address + @retval osl_File_E_AGAIN operation would block + @retval osl_File_E_NOLINK link has been severed + + @see osl_openFile() + @see osl_readFile() + @see osl_writeFile() + @see osl_setFilePos() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_readLine( + oslFileHandle Handle, sal_Sequence** ppSequence ); + +/** Synchronize the memory representation of a file with that on the physical medium. + + The function ensures that all modified data and attributes of the file associated with + the given file handle have been written to the physical medium. + In case the hard disk has a write cache enabled, the data may not really be on + permanent storage when osl_syncFile returns. + + @param Handle + [in] Handle to a file received by a previous call to osl_openFile(). + + @retval osl_File_E_None On success + @retval osl_File_E_INVAL The value of the input parameter is invalid + @retval osl_File_E_BADF The file associated with the given file handle is not open for writing + @retval osl_File_E_IO An I/O error occurred + @retval osl_File_E_NOSPC There is no enough space on the target device + @retval osl_File_E_ROFS The file associated with the given file handle is located on a read only file system + @retval osl_File_E_TIMEDOUT A remote connection timed out. This may happen when a file is on a remote location + + @see osl_openFile() + @see osl_writeFile() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_syncFile( oslFileHandle Handle ); + +/** Close an open file. + + @param[in] Handle + Handle to a file received by a previous call to osl_openFile(). + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_BADF Bad file + @retval osl_File_E_INTR function call was interrupted + @retval osl_File_E_NOLINK link has been severed + @retval osl_File_E_NOSPC no space left on device + @retval osl_File_E_IO on I/O errors + + @see osl_openFile() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_closeFile( oslFileHandle Handle ); + +/** Create a directory. + + @param[in] pustrDirectoryURL + Full qualified URL of the directory to create. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_EXIST file exists + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_NAMETOOLONG file name too long + @retval osl_File_E_NOENT no such file or directory + @retval osl_File_E_NOTDIR not a directory + @retval osl_File_E_ROFS read-only file system + @retval osl_File_E_NOSPC no space left on device + @retval osl_File_E_DQUOT quota exceeded + @retval osl_File_E_LOOP too many symbolic links encountered + @retval osl_File_E_FAULT bad address + @retval osl_FileE_IO on I/O errors + @retval osl_File_E_MLINK too many links + @retval osl_File_E_MULTIHOP multihop attempted + @retval osl_File_E_NOLINK link has been severed + + @see osl_removeDirectory() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_createDirectory( rtl_uString* pustrDirectoryURL ); + +/** Create a directory, passing flags. + + @param url + File URL of the directory to create. + + @param flags + A combination of the same osl_File_OpenFlag_*s used by osl_openFile, + except that osl_File_OpenFlag_Create is implied and ignored. Support for + the various flags can differ across operating systems. + + @see osl_createDirectory() + + @since LibreOffice 4.3 +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_createDirectoryWithFlags( + rtl_uString * url, sal_uInt32 flags); + +/** Remove an empty directory. + + @param[in] pustrDirectoryURL + Full qualified URL of the directory. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_PERM operation not permitted + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_NOENT no such file or directory + @retval osl_File_E_NOTDIR not a directory + @retval osl_File_E_NOTEMPTY directory not empty + @retval osl_File_E_FAULT bad address + @retval osl_File_E_NAMETOOLONG file name too long + @retval osl_File_E_BUSY device or resource busy + @retval osl_File_E_ROFS read-only file system + @retval osl_File_E_LOOP too many symbolic links encountered + @retval osl_File_E_EXIST file exists + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_MULTIHOP multihop attempted + @retval osl_File_E_NOLINK link has been severed + + @see osl_createDirectory() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_removeDirectory( rtl_uString* pustrDirectoryURL ); + +/** Function pointer representing a function that will be called by osl_createDirectoryPath + if a directory has been created. + + To avoid unpredictable results the callee must not access the directory whose + creation is just notified. + + @param pData + [in] User specified data given in osl_createDirectoryPath. + + @param aDirectoryUrl + [in] The absolute file URL of the directory that was just created by + osl_createDirectoryPath. + + @see osl_createDirectoryPath +*/ +typedef void (SAL_CALL *oslDirectoryCreationCallbackFunc)(void* pData, rtl_uString* aDirectoryUrl); + +/** Create a directory path. + + The osl_createDirectoryPath function creates a specified directory path. + All nonexisting sub directories will be created. + + @attention PLEASE NOTE You cannot rely on getting the error code + osl_File_E_EXIST for existing directories. Programming against this error + code is in general a strong indication of a wrong usage of osl_createDirectoryPath. + + @param aDirectoryUrl + [in] The absolute file URL of the directory path to create. + A relative file URL will not be accepted. + + @param aDirectoryCreationCallbackFunc + [in] Pointer to a function that will be called synchronously + for each sub directory that was created. The value of this + parameter may be NULL, in this case notifications will not be + sent. + + @param pData + [in] User specified data to be passed to the directory creation + callback function. The value of this parameter may be arbitrary + and will not be interpreted by osl_createDirectoryPath. + + @retval osl_File_E_None On success + @retval osl_File_E_INVAL The format of the parameters was not valid + @retval osl_File_E_ACCES Permission denied + @retval osl_File_E_EXIST The final node of the specified directory path already exist + @retval osl_File_E_NAMETOOLONG The name of the specified directory path exceeds the maximum allowed length + @retval osl_File_E_NOTDIR A component of the specified directory path already exist as file in any part of the directory path + @retval osl_File_E_ROFS Read-only file system + @retval osl_File_E_NOSPC No space left on device + @retval osl_File_E_DQUOT Quota exceeded + @retval osl_File_E_FAULT Bad address + @retval osl_File_E_IO I/O error + @retval osl_File_E_LOOP Too many symbolic links encountered + @retval osl_File_E_NOLINK Link has been severed + @retval osl_File_E_invalidError An unknown error occurred + + @see oslDirectoryCreationFunc + @see oslFileError + @see osl_createDirectory +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_createDirectoryPath( + rtl_uString* aDirectoryUrl, + oslDirectoryCreationCallbackFunc aDirectoryCreationCallbackFunc, + void* pData); + +/** Remove a regular file. + + @param[in] pustrFileURL + Full qualified URL of the file to remove. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_PERM operation not permitted + @retval osl_File_E_NAMETOOLONG file name too long + @retval osl_File_E_NOENT no such file or directory + @retval osl_File_E_ISDIR is a directory + @retval osl_File_E_ROFS read-only file system + @retval osl_File_E_FAULT bad address + @retval osl_File_E_LOOP too many symbolic links encountered + @retval osl_File_E_IO on I/O errors + @retval osl_File_E_BUSY device or resource busy + @retval osl_File_E_INTR function call was interrupted + @retval osl_File_E_MULTIHOP multihop attempted + @retval osl_File_E_NOLINK link has been severed + @retval osl_File_E_TXTBSY text file busy + + @see osl_openFile() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_removeFile( + rtl_uString* pustrFileURL ); + +/** Copy a file to a new destination. + + Copies a file to a new destination. Copies only files not directories. + No assumptions should be made about preserving attributes or file time. + + @param[in] pustrSourceFileURL + Full qualified URL of the source file. + + @param[in] pustrDestFileURL + Full qualified URL of the destination file. A directory is NOT a valid destination file! + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_PERM operation not permitted + @retval osl_File_E_NAMETOOLONG file name too long + @retval osl_File_E_NOENT no such file or directory + @retval osl_File_E_ISDIR is a directory + @retval osl_File_E_ROFS read-only file system + @retval osl_File_E_BUSY if the implementation internally requires resources that are + (temporarily) unavailable (added with LibreOffice 4.4) + + @see osl_moveFile() + @see osl_removeFile() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_copyFile( + rtl_uString* pustrSourceFileURL, rtl_uString *pustrDestFileURL ); + +/** Move a file or directory to a new destination or renames it. + + Moves a file or directory to a new destination or renames it. + File time and attributes are preserved. + + @param[in] pustrSourceFileURL + Full qualified URL of the source file. + + @param[in] pustrDestFileURL + Full qualified URL of the destination file. An existing directory is NOT a valid destination ! + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_PERM operation not permitted + @retval osl_File_E_NAMETOOLONG file name too long + @retval osl_File_E_NOENT no such file or directory + @retval osl_File_E_ROFS read-only file system + @retval osl_File_E_BUSY if the implementation internally requires resources that are + (temporarily) unavailable (added with LibreOffice 4.4) + + @see osl_copyFile() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_moveFile( + rtl_uString* pustrSourceFileURL, rtl_uString *pustrDestFileURL ); + +/** Determine a valid unused canonical name for a requested name. + + Determines a valid unused canonical name for a requested name. + Depending on the Operating System and the File System the illegal characters are replaced by valid ones. + If a file or directory with the requested name already exists a new name is generated following + the common rules on the actual Operating System and File System. + + @param[in] pustrRequestedURL + Requested name of a file or directory. + + @param[out] ppustrValidURL + On success receives a name which is unused and valid on the actual Operating System and + File System. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + + @see osl_getFileStatus() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_getCanonicalName( + rtl_uString *pustrRequestedURL, rtl_uString **ppustrValidURL); + +/** Convert a path relative to a given directory into an full qualified file URL. + + Convert a path relative to a given directory into an full qualified file URL. + The function resolves symbolic links if possible and path ellipses, so on success + the resulting absolute path is fully resolved. + + @param[in] pustrBaseDirectoryURL + Base directory URL to which the relative path is related to. + + @param[in] pustrRelativeFileURL + A URL of a file or directory relative to the directory path specified by pustrBaseDirectoryURL + or an absolute path. + If pustrRelativeFileURL denotes an absolute path pustrBaseDirectoryURL will be ignored. + + @param[out] ppustrAbsoluteFileURL + On success it receives the full qualified absolute file URL. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_NOTDIR not a directory + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_NOENT no such file or directory + @retval osl_File_E_NAMETOOLONG file name too long + @retval osl_File_E_OVERFLOW value too large for defined data type + @retval osl_File_E_FAULT bad address + @retval osl_File_E_INTR function call was interrupted + @retval osl_File_E_LOOP too many symbolic links encountered + @retval osl_File_E_MULTIHOP multihop attempted + @retval osl_File_E_NOLINK link has been severed + + @see osl_getFileStatus() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_getAbsoluteFileURL( + rtl_uString* pustrBaseDirectoryURL, + rtl_uString *pustrRelativeFileURL, + rtl_uString **ppustrAbsoluteFileURL ); + +/** Convert a system dependent path into a file URL. + + @param[in] pustrSystemPath + A System dependent path of a file or directory. + + @param[out] ppustrFileURL + On success it receives the file URL. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + + @see osl_getSystemPathFromFileURL() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_getFileURLFromSystemPath( + rtl_uString *pustrSystemPath, rtl_uString **ppustrFileURL); + +/** Search a full qualified system path or a file URL. + + @param[in] pustrFileName + A system dependent path, a file URL, a file or relative directory. + + @param[in] pustrSearchPath + @parblock + A list of system paths, in which a given file has to be searched. The Notation of a path + list is system dependent, e.g. on UNIX system "/usr/bin:/bin" and on Windows "C:\BIN;C:\BATCH". + These paths are only for the search of a file or a relative path, otherwise it will be ignored. + If pustrSearchPath is NULL or while using the search path the search failed, the function + searches for a matching file in all system directories and in the directories listed in the PATH + environment variable. + + The value of an environment variable should be used (e.g. + LD_LIBRARY_PATH) if the caller is not aware of the Operating System and so doesn't know which + path list delimiter to use. + @endparblock + + @param[out] ppustrFileURL + On success it receives the full qualified file URL. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOTDIR not a directory + @retval osl_File_E_NOENT no such file or directory not found + + @see osl_getFileURLFromSystemPath() + @see osl_getSystemPathFromFileURL() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_searchFileURL( + rtl_uString *pustrFileName, rtl_uString *pustrSearchPath, rtl_uString **ppustrFileURL ); + +/** Convert a file URL into a system dependent path. + + @param[in] pustrFileURL + A File URL. + + @param[out] ppustrSystemPath + On success it receives the system path. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + + @see osl_getFileURLFromSystemPath() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_getSystemPathFromFileURL( + rtl_uString *pustrFileURL, rtl_uString **ppustrSystemPath); + +/** Function pointer representing the function called back from osl_abbreviateSystemPath + + @param[in] ustrText + Text to calculate the width for + + @return + The width of the text specified by ustrText, e.g. it can return the width in pixel + or the width in character count. + + @see osl_abbreviateSystemPath() +*/ +typedef sal_uInt32 (SAL_CALL *oslCalcTextWidthFunc)( rtl_uString *ustrText ); + +/** Abbreviate a system notation path. + + @param[in] ustrSystemPath + The full system path to abbreviate + + @param[out] pustrCompacted + Receives the compacted system path on output + + @param[in] pCalcWidth + Function ptr that calculates the width of a string. Can be zero. + + @param[in] uMaxWidth + Maximum width allowed that is returned from pCalcWidth. + If pCalcWidth is zero the character count is assumed as width. + + @retval osl_File_E_None on success + + @see oslCalcTextWidthFunc +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_abbreviateSystemPath( + rtl_uString *ustrSystemPath, + rtl_uString **pustrCompacted, + sal_uInt32 uMaxWidth, + oslCalcTextWidthFunc pCalcWidth ); + +/** Set file attributes. + + @param[in] pustrFileURL + The full qualified file URL. + + @param[in] uAttributes + Attributes of the file to be set. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + + @see osl_getFileStatus() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_setFileAttributes( + rtl_uString *pustrFileURL, sal_uInt64 uAttributes ); + +/** Set the file time. + + @param[in] pustrFileURL + The full qualified URL of the file. + + @param[in] aCreationTime + Creation time of the given file. + + @param[in] aLastAccessTime + Time of the last access of the given file. + + @param[in] aLastWriteTime + Time of the last modifying of the given file. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOENT no such file or directory not found + + @see osl_getFileStatus() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_setFileTime( + rtl_uString *pustrFileURL, + const TimeValue *aCreationTime, + const TimeValue *aLastAccessTime, + const TimeValue *aLastWriteTime); + +/** Retrieves the file URL of the system's temporary directory path + + @param[out] pustrTempDirURL + On success receives the URL of system's temporary directory path. + + @retval osl_File_E_None on success + @retval osl_File_E_NOENT no such file or directory not found +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_getTempDirURL( + rtl_uString **pustrTempDirURL ); + +/** Creates a temporary file in the directory provided by the caller or the + directory returned by osl_getTempDirURL. + + Creates a temporary file in the directory provided by the caller or the + directory returned by osl_getTempDirURL. + Under UNIX Operating Systems the file will be created with read and write + access for the user exclusively. + If the caller requests only a handle to the open file but not the name of + it, the file will be automatically removed on close else the caller is + responsible for removing the file on success. + + Description of the different pHandle, ppustrTempFileURL parameter combinations. + pHandle is 0 and ppustrTempDirURL is 0 - this combination is invalid + pHandle is not 0 and ppustrTempDirURL is 0 - a handle to the open file + will be returned on success and the file will be automatically removed on close. + pHandle is 0 and ppustrTempDirURL is not 0 - the name of the file will be returned, + the caller is responsible for opening, closing and removing the file. + pHandle is not 0 and ppustrTempDirURL is not 0 - a handle to the open file as well as + the file name will be returned, the caller is responsible for closing and removing + the file. + + @param[in] pustrDirectoryURL + Specifies the full qualified URL where the temporary file should be created. + If pustrDirectoryURL is 0 the path returned by osl_getTempDirURL will be used. + + @param[out] pHandle + On success receives a handle to the open file. If pHandle is 0 the file will + be closed on return, in this case ppustrTempFileURL must not be 0. + + @param[out] ppustrTempFileURL + On success receives the full qualified URL of the temporary file. + If ppustrTempFileURL is 0 the file will be automatically removed on close, + in this case pHandle must not be 0. + If ppustrTempFileURL is not 0 the caller receives the name of the created + file and is responsible for removing the file, in this case + *ppustrTempFileURL must be 0 or must point to a valid rtl_uString. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameter is invalid + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_ACCES Permission denied + @retval osl_File_E_NOENT No such file or directory + @retval osl_File_E_NOTDIR Not a directory + @retval osl_File_E_ROFS Read-only file system + @retval osl_File_E_NOSPC No space left on device + @retval osl_File_E_DQUOT Quota exceeded + + @see osl_getTempDirURL() +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_createTempFile( + rtl_uString* pustrDirectoryURL, + oslFileHandle* pHandle, + rtl_uString** ppustrTempFileURL); + +/** Move a file to a new destination or rename it, taking old file's identity (if exists). + + Moves or renames a file, replacing an existing file if exist. If the old file existed, + moved file's metadata, e.g. creation time (on FSes which keep files' creation time) or + ACLs, are set to old one's (to keep the old file's identity) - currently this is only + implemented fully on Windows; on other platforms, this is mostly equivalent to osl_moveFile. + + @param[in] pustrSourceFileURL + Full qualified URL of the source file. + + @param[in] pustrDestFileURL + Full qualified URL of the destination file. + + @retval osl_File_E_None on success + @retval osl_File_E_INVAL the format of the parameters was not valid + @retval osl_File_E_NOMEM not enough memory for allocating structures + @retval osl_File_E_ACCES permission denied + @retval osl_File_E_PERM operation not permitted + @retval osl_File_E_NAMETOOLONG file name too long + @retval osl_File_E_NOENT no such file + @retval osl_File_E_ROFS read-only file system + @retval osl_File_E_BUSY if the implementation internally requires resources that are + (temporarily) unavailable + + @see osl_moveFile() + + @since LibreOffice 6.2 +*/ +SAL_DLLPUBLIC oslFileError SAL_CALL osl_replaceFile(rtl_uString* pustrSourceFileURL, + rtl_uString* pustrDestFileURL); + +#ifdef __cplusplus +} +#endif + +#endif // INCLUDED_OSL_FILE_H + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |