diff options
Diffstat (limited to 'sc/source/filter/inc/xlchart.hxx')
| -rw-r--r-- | sc/source/filter/inc/xlchart.hxx | 1437 |
1 files changed, 1437 insertions, 0 deletions
diff --git a/sc/source/filter/inc/xlchart.hxx b/sc/source/filter/inc/xlchart.hxx new file mode 100644 index 000000000..8b015e012 --- /dev/null +++ b/sc/source/filter/inc/xlchart.hxx @@ -0,0 +1,1437 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#pragma once + +#include <tools/gen.hxx> +#include "fapihelper.hxx" +#include <map> +#include <memory> + +namespace com::sun::star { + namespace container { class XNameContainer; } + namespace lang { class XMultiServiceFactory; } + namespace chart { class XChartDocument; } + namespace chart2 { class XChartDocument; } + namespace drawing { class XShape; } +} + +class XclRoot; + +// Property names ============================================================= + +// service names +inline constexpr OUStringLiteral SERVICE_DRAWING_BITMAPTABLE = u"com.sun.star.drawing.BitmapTable"; +inline constexpr OUStringLiteral SERVICE_DRAWING_DASHTABLE = u"com.sun.star.drawing.DashTable"; +inline constexpr OUStringLiteral SERVICE_DRAWING_GRADIENTTABLE = u"com.sun.star.drawing.GradientTable"; +inline constexpr OUStringLiteral SERVICE_DRAWING_HATCHTABLE = u"com.sun.star.drawing.HatchTable"; + +inline constexpr OUStringLiteral SERVICE_CHART2_AXIS = u"com.sun.star.chart2.Axis"; +inline constexpr OUStringLiteral SERVICE_CHART2_DATAPROVIDER = u"com.sun.star.chart2.data.DataProvider"; +inline constexpr OUStringLiteral SERVICE_CHART2_DATASERIES = u"com.sun.star.chart2.DataSeries"; +inline constexpr OUStringLiteral SERVICE_CHART2_DIAGRAM = u"com.sun.star.chart2.Diagram"; +inline constexpr OUStringLiteral SERVICE_CHART2_ERRORBAR = u"com.sun.star.chart2.ErrorBar"; +inline constexpr OUStringLiteral SERVICE_CHART2_LEGEND = u"com.sun.star.chart2.Legend"; +inline constexpr OUStringLiteral SERVICE_CHART2_TITLE = u"com.sun.star.chart2.Title"; + +// property names +inline constexpr OUStringLiteral EXC_CHPROP_ADDITIONALSHAPES = u"AdditionalShapes"; +inline constexpr OUStringLiteral EXC_CHPROP_ANCHORPOSITION = u"AnchorPosition"; +inline constexpr OUStringLiteral EXC_CHPROP_ARRANGEORDER = u"ArrangeOrder"; +inline constexpr OUStringLiteral EXC_CHPROP_ATTAXISINDEX = u"AttachedAxisIndex"; +inline constexpr OUStringLiteral EXC_CHPROP_ATTRIBDATAPOINTS = u"AttributedDataPoints"; +inline constexpr OUStringLiteral EXC_CHPROP_BLACKDAY = u"BlackDay"; +inline constexpr OUStringLiteral EXC_CHPROP_COLOR = u"Color"; +inline constexpr OUStringLiteral EXC_CHPROP_CONNECTBARS = u"ConnectBars"; +inline constexpr OUStringLiteral EXC_CHPROP_CROSSOVERPOSITION = u"CrossoverPosition"; +inline constexpr OUStringLiteral EXC_CHPROP_CROSSOVERVALUE = u"CrossoverValue"; +inline constexpr OUStringLiteral EXC_CHPROP_CURVESTYLE = u"CurveStyle"; +inline constexpr OUStringLiteral EXC_CHPROP_CURVENAME = u"CurveName"; +inline constexpr OUStringLiteral EXC_CHPROP_D3DSCENEAMBIENTCOLOR = u"D3DSceneAmbientColor"; +inline constexpr OUStringLiteral EXC_CHPROP_D3DSCENELIGHTON1 = u"D3DSceneLightOn1"; +inline constexpr OUStringLiteral EXC_CHPROP_D3DSCENELIGHTCOLOR2 = u"D3DSceneLightColor2"; +inline constexpr OUStringLiteral EXC_CHPROP_D3DSCENELIGHTDIR2 = u"D3DSceneLightDirection2"; +inline constexpr OUStringLiteral EXC_CHPROP_D3DSCENELIGHTON2 = u"D3DSceneLightOn2"; +inline constexpr OUStringLiteral EXC_CHPROP_D3DSCENEPERSPECTIVE = u"D3DScenePerspective"; +inline constexpr OUStringLiteral EXC_CHPROP_D3DSCENESHADEMODE = u"D3DSceneShadeMode"; +inline constexpr OUStringLiteral EXC_CHPROP_DISPLAYLABELS = u"DisplayLabels"; +inline constexpr OUStringLiteral EXC_CHPROP_ERRORBARSTYLE = u"ErrorBarStyle"; +inline constexpr OUStringLiteral EXC_CHPROP_ERRORBARX = u"ErrorBarX"; +inline constexpr OUStringLiteral EXC_CHPROP_ERRORBARY = u"ErrorBarY"; +inline constexpr OUStringLiteral EXC_CHPROP_EXPANSION = u"Expansion"; +inline constexpr OUStringLiteral EXC_CHPROP_EXPTIMEINCREMENT = u"ExplicitTimeIncrement"; +inline constexpr OUStringLiteral EXC_CHPROP_EXTRAPOLATE_FORWARD = u"ExtrapolateForward"; +inline constexpr OUStringLiteral EXC_CHPROP_EXTRAPOLATE_BACKWARD = u"ExtrapolateBackward"; +inline constexpr OUStringLiteral EXC_CHPROP_FORCE_INTERCEPT = u"ForceIntercept"; +inline constexpr OUStringLiteral EXC_CHPROP_GAPWIDTHSEQ = u"GapwidthSequence"; +inline constexpr OUStringLiteral EXC_CHPROP_GEOMETRY3D = u"Geometry3D"; +inline constexpr OUStringLiteral EXC_CHPROP_INCLUDEHIDDENCELLS = u"IncludeHiddenCells"; +inline constexpr OUStringLiteral EXC_CHPROP_INTERCEPT_VALUE = u"InterceptValue"; +inline constexpr OUStringLiteral EXC_CHPROP_JAPANESE = u"Japanese"; +inline constexpr OUStringLiteral EXC_CHPROP_LABEL = u"Label"; +inline constexpr OUStringLiteral EXC_CHPROP_LABELPLACEMENT = u"LabelPlacement"; +inline constexpr OUStringLiteral EXC_CHPROP_LABELPOSITION = u"LabelPosition"; +inline constexpr OUStringLiteral EXC_CHPROP_LABELSEPARATOR = u"LabelSeparator"; +inline constexpr OUStringLiteral EXC_CHPROP_SHOWLEGENDENTRY = u"ShowLegendEntry"; +inline constexpr OUStringLiteral EXC_CHPROP_MAJORTICKS = u"MajorTickmarks"; +inline constexpr OUStringLiteral EXC_CHPROP_MARKPOSITION = u"MarkPosition"; +inline constexpr OUStringLiteral EXC_CHPROP_MINORTICKS = u"MinorTickmarks"; +inline constexpr OUStringLiteral EXC_CHPROP_MISSINGVALUETREATMENT = u"MissingValueTreatment"; +inline constexpr OUStringLiteral EXC_CHPROP_MOVING_AVERAGE_PERIOD = u"MovingAveragePeriod"; +inline constexpr OUStringLiteral EXC_CHPROP_NEGATIVEERROR = u"NegativeError"; +inline constexpr OUStringLiteral EXC_CHPROP_NUMBERFORMAT = u"NumberFormat"; +inline constexpr OUStringLiteral EXC_CHPROP_NUMBERFORMAT_LINKSRC = u"LinkNumberFormatToSource"; +inline constexpr OUStringLiteral EXC_CHPROP_OFFSET = u"Offset"; +inline constexpr OUStringLiteral EXC_CHPROP_OVERLAPSEQ = u"OverlapSequence"; +inline constexpr OUStringLiteral EXC_CHPROP_PERCENTAGENUMFMT = u"PercentageNumberFormat"; +inline constexpr OUStringLiteral EXC_CHPROP_PERCENTDIAGONAL = u"PercentDiagonal"; +inline constexpr OUStringLiteral EXC_CHPROP_PERSPECTIVE = u"Perspective"; +inline constexpr OUStringLiteral EXC_CHPROP_POSITIVEERROR = u"PositiveError"; +inline constexpr OUStringLiteral EXC_CHPROP_POLYNOMIAL_DEGREE = u"PolynomialDegree"; +inline constexpr OUStringLiteral EXC_CHPROP_RELATIVEPOSITION = u"RelativePosition"; +inline constexpr OUStringLiteral EXC_CHPROP_RELATIVESIZE = u"RelativeSize"; +inline constexpr OUStringLiteral EXC_CHPROP_RIGHTANGLEDAXES = u"RightAngledAxes"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE = u"Role"; +inline constexpr OUStringLiteral EXC_CHPROP_ROTATIONHORIZONTAL = u"RotationHorizontal"; +inline constexpr OUStringLiteral EXC_CHPROP_ROTATIONVERTICAL = u"RotationVertical"; +inline constexpr OUStringLiteral EXC_CHPROP_3DRELATIVEHEIGHT = u"3DRelativeHeight"; +inline constexpr OUStringLiteral EXC_CHPROP_SHOW = u"Show"; +inline constexpr OUStringLiteral EXC_CHPROP_SHOWCORRELATION = u"ShowCorrelationCoefficient"; +inline constexpr OUStringLiteral EXC_CHPROP_SHOWEQUATION = u"ShowEquation"; +inline constexpr OUStringLiteral EXC_CHPROP_SHOWFIRST = u"ShowFirst"; +inline constexpr OUStringLiteral EXC_CHPROP_SHOWHIGHLOW = u"ShowHighLow"; +inline constexpr OUStringLiteral EXC_CHPROP_SHOWNEGATIVEERROR = u"ShowNegativeError"; +inline constexpr OUStringLiteral EXC_CHPROP_SHOWPOSITIVEERROR = u"ShowPositiveError"; +inline constexpr OUStringLiteral EXC_CHPROP_STACKCHARACTERS = u"StackCharacters"; +inline constexpr OUStringLiteral EXC_CHPROP_STACKINGDIR = u"StackingDirection"; +inline constexpr OUStringLiteral EXC_CHPROP_STARTINGANGLE = u"StartingAngle"; +inline constexpr OUStringLiteral EXC_CHPROP_SWAPXANDYAXIS = u"SwapXAndYAxis"; +inline constexpr OUStringLiteral EXC_CHPROP_SYMBOL = u"Symbol"; +inline constexpr OUStringLiteral EXC_CHPROP_TEXTBREAK = u"TextBreak"; +inline constexpr OUStringLiteral EXC_CHPROP_TEXTOVERLAP = u"TextOverlap"; +inline constexpr OUStringLiteral EXC_CHPROP_TEXTROTATION = u"TextRotation"; +inline constexpr OUStringLiteral EXC_CHPROP_USERINGS = u"UseRings"; +inline constexpr OUStringLiteral EXC_CHPROP_VARYCOLORSBY = u"VaryColorsByPoint"; +inline constexpr OUStringLiteral EXC_CHPROP_WEIGHT = u"Weight"; +inline constexpr OUStringLiteral EXC_CHPROP_WHITEDAY = u"WhiteDay"; + +// data series roles +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_CATEG = u"categories"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_ERRORBARS_NEGX = u"error-bars-x-negative"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_ERRORBARS_NEGY = u"error-bars-y-negative"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_ERRORBARS_POSX = u"error-bars-x-positive"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_ERRORBARS_POSY = u"error-bars-y-positive"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_LABEL = u"label"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_XVALUES = u"values-x"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_YVALUES = u"values-y"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_OPENVALUES = u"values-first"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_CLOSEVALUES = u"values-last"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_LOWVALUES = u"values-min"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_HIGHVALUES = u"values-max"; +inline constexpr OUStringLiteral EXC_CHPROP_ROLE_SIZEVALUES = u"values-size"; + +// Constants and Enumerations ================================================= + +const std::size_t EXC_CHART_PROGRESS_SIZE = 10; +const sal_uInt16 EXC_CHART_AUTOROTATION = 0xFFFF; /// Automatic rotation, e.g. axis labels (internal use only). + +const sal_Int32 EXC_CHART_AXIS_NONE = -1; /// For internal use only. +const sal_Int32 EXC_CHART_AXIS_X = 0; /// API X axis index. +const sal_Int32 EXC_CHART_AXIS_Y = 1; /// API Y axis index. +const sal_Int32 EXC_CHART_AXIS_Z = 2; /// API Z axis index. +const sal_Int32 EXC_CHART_AXESSET_NONE = -1; /// For internal use only. +const sal_Int32 EXC_CHART_AXESSET_PRIMARY = 0; /// API primary axes set index. +const sal_Int32 EXC_CHART_AXESSET_SECONDARY = 1; /// API secondary axes set index. + +const sal_Int32 EXC_CHART_TOTALUNITS = 4000; /// Most chart objects are positioned in 1/4000 of chart area. +const sal_Int32 EXC_CHART_PLOTAREAUNITS = 1000; /// For objects that are positioned in 1/1000 of plot area. + +// (0x0850) CHFRINFO ---------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHFRINFO = 0x0850; + +const sal_uInt8 EXC_CHFRINFO_EXCEL2000 = 9; +const sal_uInt8 EXC_CHFRINFO_EXCELXP2003 = 10; +const sal_uInt8 EXC_CHFRINFO_EXCEL2007 = 11; + +// (0x0852, 0x0853) CHFRBLOCKBEGIN, CHFRBLOCKEND ------------------------------ + +const sal_uInt16 EXC_ID_CHFRBLOCKBEGIN = 0x0852; +const sal_uInt16 EXC_ID_CHFRBLOCKEND = 0x0853; + +const sal_uInt16 EXC_CHFRBLOCK_TYPE_AXESSET = 0; +const sal_uInt16 EXC_CHFRBLOCK_TYPE_TEXT = 2; +const sal_uInt16 EXC_CHFRBLOCK_TYPE_AXIS = 4; +const sal_uInt16 EXC_CHFRBLOCK_TYPE_TYPEGROUP = 5; +const sal_uInt16 EXC_CHFRBLOCK_TYPE_DATATABLE = 6; +const sal_uInt16 EXC_CHFRBLOCK_TYPE_FRAME = 7; +const sal_uInt16 EXC_CHFRBLOCK_TYPE_LEGEND = 9; +const sal_uInt16 EXC_CHFRBLOCK_TYPE_LEGENDEX = 10; +const sal_uInt16 EXC_CHFRBLOCK_TYPE_SERIES = 12; +const sal_uInt16 EXC_CHFRBLOCK_TYPE_CHART = 13; +const sal_uInt16 EXC_CHFRBLOCK_TYPE_DATAFORMAT = 14; +const sal_uInt16 EXC_CHFRBLOCK_TYPE_DROPBAR = 15; +const sal_uInt16 EXC_CHFRBLOCK_TYPE_UNKNOWN = 0xFFFF; /// For internal use only. + +const sal_uInt16 EXC_CHFRBLOCK_TEXT_TITLE = 0; +const sal_uInt16 EXC_CHFRBLOCK_TEXT_DEFTEXT = 2; +const sal_uInt16 EXC_CHFRBLOCK_TEXT_AXISTITLE = 4; +const sal_uInt16 EXC_CHFRBLOCK_TEXT_DATALABEL = 5; + +const sal_uInt16 EXC_CHFRBLOCK_FRAME_STANDARD = 0; +const sal_uInt16 EXC_CHFRBLOCK_FRAME_PLOTFRAME = 1; +const sal_uInt16 EXC_CHFRBLOCK_FRAME_BACKGROUND = 2; + +// (0x086B) CHFRLABELPROPS ---------------------------------------------------- + +const sal_uInt16 EXC_ID_CHFRLABELPROPS = 0x086B; + +const sal_uInt16 EXC_CHFRLABELPROPS_SHOWSERIES = 0x0001; +const sal_uInt16 EXC_CHFRLABELPROPS_SHOWCATEG = 0x0002; +const sal_uInt16 EXC_CHFRLABELPROPS_SHOWVALUE = 0x0004; +const sal_uInt16 EXC_CHFRLABELPROPS_SHOWPERCENT = 0x0008; +const sal_uInt16 EXC_CHFRLABELPROPS_SHOWBUBBLE = 0x0010; + +// (0x1001) CHUNITS ----------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHUNITS = 0x1001; + +const sal_uInt16 EXC_CHUNITS_TWIPS = 0; +const sal_uInt16 EXC_CHUNITS_PIXELS = 1; + +// (0x1002) CHCHART ----------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHCHART = 0x1002; + +// (0x1003) CHSERIES ---------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHSERIES = 0x1003; + +const sal_uInt16 EXC_CHSERIES_DATE = 0; +const sal_uInt16 EXC_CHSERIES_NUMERIC = 1; +const sal_uInt16 EXC_CHSERIES_SEQUENCE = 2; +const sal_uInt16 EXC_CHSERIES_TEXT = 3; + +const sal_uInt16 EXC_CHSERIES_MAXSERIES = 255; /// Maximum valid series index. +const sal_uInt16 EXC_CHSERIES_INVALID = 0xFFFF; /// Invalid series index (for internal use). + +// (0x1006) CHDATAFORMAT ------------------------------------------------------ + +const sal_uInt16 EXC_ID_CHDATAFORMAT = 0x1006; + +const sal_uInt16 EXC_CHDATAFORMAT_MAXPOINTCOUNT = 32000; /// Maximum number of data points. +const sal_uInt16 EXC_CHDATAFORMAT_DEFAULT = 0xFFFD; /// As format index: global default for an axes set. +const sal_uInt16 EXC_CHDATAFORMAT_UNKNOWN = 0xFFFE; /// As point index: unknown format, don't use. +const sal_uInt16 EXC_CHDATAFORMAT_ALLPOINTS = 0xFFFF; /// As point index: default for a series. + +const sal_uInt16 EXC_CHDATAFORMAT_OLDCOLORS = 0x0001; + +// (0x1007) CHLINEFORMAT ------------------------------------------------------ + +const sal_uInt16 EXC_ID_CHLINEFORMAT = 0x1007; + +const sal_uInt16 EXC_CHLINEFORMAT_SOLID = 0; +const sal_uInt16 EXC_CHLINEFORMAT_DASH = 1; +const sal_uInt16 EXC_CHLINEFORMAT_DOT = 2; +const sal_uInt16 EXC_CHLINEFORMAT_DASHDOT = 3; +const sal_uInt16 EXC_CHLINEFORMAT_DASHDOTDOT = 4; +const sal_uInt16 EXC_CHLINEFORMAT_NONE = 5; +const sal_uInt16 EXC_CHLINEFORMAT_DARKTRANS = 6; +const sal_uInt16 EXC_CHLINEFORMAT_MEDTRANS = 7; +const sal_uInt16 EXC_CHLINEFORMAT_LIGHTTRANS = 8; + +const sal_Int16 EXC_CHLINEFORMAT_HAIR = -1; +const sal_Int16 EXC_CHLINEFORMAT_SINGLE = 0; +const sal_Int16 EXC_CHLINEFORMAT_DOUBLE = 1; +const sal_Int16 EXC_CHLINEFORMAT_TRIPLE = 2; + +const sal_uInt16 EXC_CHLINEFORMAT_AUTO = 0x0001; +const sal_uInt16 EXC_CHLINEFORMAT_SHOWAXIS = 0x0004; + +// (0x1009) CHMARKERFORMAT ---------------------------------------------------- + +const sal_uInt16 EXC_ID_CHMARKERFORMAT = 0x1009; + +const sal_uInt16 EXC_CHMARKERFORMAT_NOSYMBOL = 0; +const sal_uInt16 EXC_CHMARKERFORMAT_SQUARE = 1; +const sal_uInt16 EXC_CHMARKERFORMAT_DIAMOND = 2; +const sal_uInt16 EXC_CHMARKERFORMAT_TRIANGLE = 3; +const sal_uInt16 EXC_CHMARKERFORMAT_CROSS = 4; +const sal_uInt16 EXC_CHMARKERFORMAT_STAR = 5; +const sal_uInt16 EXC_CHMARKERFORMAT_DOWJ = 6; +const sal_uInt16 EXC_CHMARKERFORMAT_STDDEV = 7; +const sal_uInt16 EXC_CHMARKERFORMAT_CIRCLE = 8; +const sal_uInt16 EXC_CHMARKERFORMAT_PLUS = 9; + +const sal_uInt32 EXC_CHMARKERFORMAT_HAIRSIZE = 60; /// Automatic symbol size for hair lines. +const sal_uInt32 EXC_CHMARKERFORMAT_SINGLESIZE = 100; /// Automatic symbol size for single lines. +const sal_uInt32 EXC_CHMARKERFORMAT_DOUBLESIZE = 140; /// Automatic symbol size for double lines. +const sal_uInt32 EXC_CHMARKERFORMAT_TRIPLESIZE = 180; /// Automatic symbol size for triple lines. + +const sal_uInt16 EXC_CHMARKERFORMAT_AUTO = 0x0001; +const sal_uInt16 EXC_CHMARKERFORMAT_NOFILL = 0x0010; +const sal_uInt16 EXC_CHMARKERFORMAT_NOLINE = 0x0020; + +// (0x100A) CHAREAFORMAT ------------------------------------------------------ + +const sal_uInt16 EXC_ID_CHAREAFORMAT = 0x100A; + +const sal_uInt16 EXC_CHAREAFORMAT_AUTO = 0x0001; +const sal_uInt16 EXC_CHAREAFORMAT_INVERTNEG = 0x0002; + +// (0x100B) CHPIEFORMAT ------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHPIEFORMAT = 0x100B; + +// (0x100C) CHATTACHEDLABEL --------------------------------------------------- + +const sal_uInt16 EXC_ID_CHATTACHEDLABEL = 0x100C; + +const sal_uInt16 EXC_CHATTLABEL_SHOWVALUE = 0x0001; +const sal_uInt16 EXC_CHATTLABEL_SHOWPERCENT = 0x0002; +const sal_uInt16 EXC_CHATTLABEL_SHOWCATEGPERC = 0x0004; +const sal_uInt16 EXC_CHATTLABEL_SMOOTHED = 0x0008; /// Smoothed line. +const sal_uInt16 EXC_CHATTLABEL_SHOWCATEG = 0x0010; +const sal_uInt16 EXC_CHATTLABEL_SHOWBUBBLE = 0x0020; + +// (0x100D) CHSTRING ---------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHSTRING = 0x100D; + +// (0x1014) CHTYPEGROUP ------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHTYPEGROUP = 0x1014; + +const sal_uInt16 EXC_CHTYPEGROUP_VARIEDCOLORS = 0x0001; /// Varied colors for points. + +// (0x1015) CHLEGEND ---------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHLEGEND = 0x1015; + +const sal_uInt8 EXC_CHLEGEND_BOTTOM = 0; +const sal_uInt8 EXC_CHLEGEND_CORNER = 1; +const sal_uInt8 EXC_CHLEGEND_TOP = 2; +const sal_uInt8 EXC_CHLEGEND_RIGHT = 3; +const sal_uInt8 EXC_CHLEGEND_LEFT = 4; +const sal_uInt8 EXC_CHLEGEND_NOTDOCKED = 7; + +const sal_uInt8 EXC_CHLEGEND_CLOSE = 0; +const sal_uInt8 EXC_CHLEGEND_MEDIUM = 1; +const sal_uInt8 EXC_CHLEGEND_OPEN = 2; + +const sal_uInt16 EXC_CHLEGEND_DOCKED = 0x0001; +const sal_uInt16 EXC_CHLEGEND_AUTOSERIES = 0x0002; +const sal_uInt16 EXC_CHLEGEND_AUTOPOSX = 0x0004; +const sal_uInt16 EXC_CHLEGEND_AUTOPOSY = 0x0008; +const sal_uInt16 EXC_CHLEGEND_STACKED = 0x0010; +const sal_uInt16 EXC_CHLEGEND_DATATABLE = 0x0020; + +// (0x1017) CHBAR, CHCOLUMN --------------------------------------------------- + +const sal_uInt16 EXC_ID_CHBAR = 0x1017; + +const sal_uInt16 EXC_CHBAR_HORIZONTAL = 0x0001; +const sal_uInt16 EXC_CHBAR_STACKED = 0x0002; +const sal_uInt16 EXC_CHBAR_PERCENT = 0x0004; +const sal_uInt16 EXC_CHBAR_SHADOW = 0x0008; + +// (0x1018, 0x101A) CHLINE, CHAREA -------------------------------------------- + +const sal_uInt16 EXC_ID_CHLINE = 0x1018; +const sal_uInt16 EXC_ID_CHAREA = 0x101A; + +const sal_uInt16 EXC_CHLINE_STACKED = 0x0001; +const sal_uInt16 EXC_CHLINE_PERCENT = 0x0002; +const sal_uInt16 EXC_CHLINE_SHADOW = 0x0004; + +// (0x1019) CHPIE ------------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHPIE = 0x1019; + +const sal_uInt16 EXC_CHPIE_SHADOW = 0x0001; +const sal_uInt16 EXC_CHPIE_LINES = 0x0002; + +// (0x101B) CHSCATTER --------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHSCATTER = 0x101B; + +const sal_uInt16 EXC_CHSCATTER_AREA = 1; /// Bubble area refers to value. +const sal_uInt16 EXC_CHSCATTER_WIDTH = 2; /// Bubble width refers to value. + +const sal_uInt16 EXC_CHSCATTER_BUBBLES = 0x0001; +const sal_uInt16 EXC_CHSCATTER_SHOWNEG = 0x0002; +const sal_uInt16 EXC_CHSCATTER_SHADOW = 0x0004; + +// (0x001C) CHCHARTLINE ------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHCHARTLINE = 0x101C; + +const sal_uInt16 EXC_CHCHARTLINE_DROP = 0; /// Drop lines. +const sal_uInt16 EXC_CHCHARTLINE_HILO = 1; /// Hi-lo lines. +const sal_uInt16 EXC_CHCHARTLINE_CONNECT = 2; /// Connector lines in stacked bar charts. + +// (0x101D) CHAXIS ------------------------------------------------------------ + +const sal_uInt16 EXC_ID_CHAXIS = 0x101D; + +const sal_uInt16 EXC_CHAXIS_X = 0; +const sal_uInt16 EXC_CHAXIS_Y = 1; +const sal_uInt16 EXC_CHAXIS_Z = 2; +const sal_uInt16 EXC_CHAXIS_NONE = 0xFFFF; /// For internal use only. + +// (0x101E) CHTICK ------------------------------------------------------------ + +const sal_uInt16 EXC_ID_CHTICK = 0x101E; + +const sal_uInt8 EXC_CHTICK_INSIDE = 0x01; +const sal_uInt8 EXC_CHTICK_OUTSIDE = 0x02; + +const sal_uInt8 EXC_CHTICK_NOLABEL = 0; +const sal_uInt8 EXC_CHTICK_LOW = 1; /// Below diagram/right of diagram. +const sal_uInt8 EXC_CHTICK_HIGH = 2; /// Above diagram/left of diagram. +const sal_uInt8 EXC_CHTICK_NEXT = 3; /// Next to axis. + +const sal_uInt8 EXC_CHTICK_TRANSPARENT = 1; +const sal_uInt8 EXC_CHTICK_OPAQUE = 2; + +const sal_uInt16 EXC_CHTICK_AUTOCOLOR = 0x0001; +const sal_uInt16 EXC_CHTICK_AUTOFILL = 0x0002; +const sal_uInt16 EXC_CHTICK_AUTOROT = 0x0020; + +// (0x101F) CHVALUERANGE ------------------------------------------------------ + +const sal_uInt16 EXC_ID_CHVALUERANGE = 0x101F; + +const sal_uInt16 EXC_CHVALUERANGE_AUTOMIN = 0x0001; +const sal_uInt16 EXC_CHVALUERANGE_AUTOMAX = 0x0002; +const sal_uInt16 EXC_CHVALUERANGE_AUTOMAJOR = 0x0004; +const sal_uInt16 EXC_CHVALUERANGE_AUTOMINOR = 0x0008; +const sal_uInt16 EXC_CHVALUERANGE_AUTOCROSS = 0x0010; +const sal_uInt16 EXC_CHVALUERANGE_LOGSCALE = 0x0020; +const sal_uInt16 EXC_CHVALUERANGE_REVERSE = 0x0040; /// Axis direction reversed. +const sal_uInt16 EXC_CHVALUERANGE_MAXCROSS = 0x0080; /// Other axis crosses at own maximum. +const sal_uInt16 EXC_CHVALUERANGE_BIT8 = 0x0100; /// This bit is always set in BIFF5+. + +// (0x1020) CHLABELRANGE ----------------------------------------------------- + +const sal_uInt16 EXC_ID_CHLABELRANGE = 0x1020; + +const sal_uInt16 EXC_CHLABELRANGE_BETWEEN = 0x0001; /// Axis between categories. +const sal_uInt16 EXC_CHLABELRANGE_MAXCROSS = 0x0002; /// Other axis crosses at own maximum. +const sal_uInt16 EXC_CHLABELRANGE_REVERSE = 0x0004; /// Axis direction reversed. + +// (0x1021) CHAXISLINE -------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHAXISLINE = 0x1021; + +const sal_uInt16 EXC_CHAXISLINE_AXISLINE = 0; /// Axis line itself. +const sal_uInt16 EXC_CHAXISLINE_MAJORGRID = 1; /// Major grid line. +const sal_uInt16 EXC_CHAXISLINE_MINORGRID = 2; /// Minor grid line. +const sal_uInt16 EXC_CHAXISLINE_WALLS = 3; /// Walls (X, Z axis), floor (Y axis). + +// (0x1024) CHDEFAULTTEXT ----------------------------------------------------- + +const sal_uInt16 EXC_ID_CHDEFAULTTEXT = 0x1024; + +const sal_uInt16 EXC_CHDEFTEXT_TEXTLABEL = 0; /// Default for text data labels (not used?). +const sal_uInt16 EXC_CHDEFTEXT_NUMLABEL = 1; /// Default for numeric data labels (not used?). +const sal_uInt16 EXC_CHDEFTEXT_GLOBAL = 2; /// Default text for all chart objects. +const sal_uInt16 EXC_CHDEFTEXT_AXESSET = 3; /// Default text for axes and data points (BIFF8 only). +const sal_uInt16 EXC_CHDEFTEXT_NONE = 0xFFFF; /// No default text available. + +// (0x1025) CHTEXT ------------------------------------------------------------ + +const sal_uInt16 EXC_ID_CHTEXT = 0x1025; + +const sal_uInt8 EXC_CHTEXT_ALIGN_TOPLEFT = 1; /// Horizontal: left, vertical: top. +const sal_uInt8 EXC_CHTEXT_ALIGN_CENTER = 2; +const sal_uInt8 EXC_CHTEXT_ALIGN_BOTTOMRIGHT = 3; /// Horizontal: right, vertical: bottom. +const sal_uInt8 EXC_CHTEXT_ALIGN_JUSTIFY = 4; +const sal_uInt8 EXC_CHTEXT_ALIGN_DISTRIBUTE = 5; + +const sal_uInt16 EXC_CHTEXT_TRANSPARENT = 1; +const sal_uInt16 EXC_CHTEXT_OPAQUE = 2; + +const sal_uInt16 EXC_CHTEXT_AUTOCOLOR = 0x0001; /// Automatic text color. +const sal_uInt16 EXC_CHTEXT_SHOWSYMBOL = 0x0002; /// Legend symbol for data point caption. +const sal_uInt16 EXC_CHTEXT_SHOWVALUE = 0x0004; /// Data point caption is the value. +const sal_uInt16 EXC_CHTEXT_VERTICAL = 0x0008; +const sal_uInt16 EXC_CHTEXT_AUTOTEXT = 0x0010; /// Label text generated from chart data. +const sal_uInt16 EXC_CHTEXT_AUTOGEN = 0x0020; /// Text object is inserted automatically. +const sal_uInt16 EXC_CHTEXT_DELETED = 0x0040; /// Text object is removed. +const sal_uInt16 EXC_CHTEXT_AUTOFILL = 0x0080; /// Automatic text background mode (transparent/opaque). +const sal_uInt16 EXC_CHTEXT_SHOWCATEGPERC = 0x0800; /// Data point caption is category and percent. +const sal_uInt16 EXC_CHTEXT_SHOWPERCENT = 0x1000; /// Data point caption as percent. +const sal_uInt16 EXC_CHTEXT_SHOWBUBBLE = 0x2000; /// Show bubble size. +const sal_uInt16 EXC_CHTEXT_SHOWCATEG = 0x4000; /// Data point caption is category name. + +const sal_uInt16 EXC_CHTEXT_POS_DEFAULT = 0; +const sal_uInt16 EXC_CHTEXT_POS_OUTSIDE = 1; +const sal_uInt16 EXC_CHTEXT_POS_INSIDE = 2; +const sal_uInt16 EXC_CHTEXT_POS_CENTER = 3; +const sal_uInt16 EXC_CHTEXT_POS_AXIS = 4; +const sal_uInt16 EXC_CHTEXT_POS_ABOVE = 5; +const sal_uInt16 EXC_CHTEXT_POS_BELOW = 6; +const sal_uInt16 EXC_CHTEXT_POS_LEFT = 7; +const sal_uInt16 EXC_CHTEXT_POS_RIGHT = 8; +const sal_uInt16 EXC_CHTEXT_POS_AUTO = 9; +const sal_uInt16 EXC_CHTEXT_POS_MOVED = 10; + +// (0x1026) CHFONT ------------------------------------------------------------ + +const sal_uInt16 EXC_ID_CHFONT = 0x1026; + +// (0x1027) CHOBJECTLINK ------------------------------------------------------ + +const sal_uInt16 EXC_ID_CHOBJECTLINK = 0x1027; + +// link targets +const sal_uInt16 EXC_CHOBJLINK_NONE = 0; /// No link target. +const sal_uInt16 EXC_CHOBJLINK_TITLE = 1; /// Chart title. +const sal_uInt16 EXC_CHOBJLINK_YAXIS = 2; /// Value axis (Y axis). +const sal_uInt16 EXC_CHOBJLINK_XAXIS = 3; /// Category axis (X axis). +const sal_uInt16 EXC_CHOBJLINK_DATA = 4; /// Data series/point. +const sal_uInt16 EXC_CHOBJLINK_ZAXIS = 7; /// Series axis (Z axis). +const sal_uInt16 EXC_CHOBJLINK_AXISUNIT = 12; /// Unit name for axis labels. + +// (0x1032) CHFRAME ----------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHFRAME = 0x1032; + +const sal_uInt16 EXC_CHFRAME_STANDARD = 0; +const sal_uInt16 EXC_CHFRAME_SHADOW = 4; + +const sal_uInt16 EXC_CHFRAME_AUTOSIZE = 0x0001; +const sal_uInt16 EXC_CHFRAME_AUTOPOS = 0x0002; + +// (0x1033, 0x1034) CHBEGIN, CHEND -------------------------------------------- + +const sal_uInt16 EXC_ID_CHBEGIN = 0x1033; +const sal_uInt16 EXC_ID_CHEND = 0x1034; + +// (0x1035) CHPLOTFRAME ------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHPLOTFRAME = 0x1035; + +// (0x103A) CHCHART3D --------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHCHART3D = 0x103A; + +const sal_uInt16 EXC_CHCHART3D_REAL3D = 0x0001; /// true = real 3d perspective. +const sal_uInt16 EXC_CHCHART3D_CLUSTER = 0x0002; /// false = Z axis, true = clustered/stacked. +const sal_uInt16 EXC_CHCHART3D_AUTOHEIGHT = 0x0004; /// true = automatic height to width ratio. +const sal_uInt16 EXC_CHCHART3D_HASWALLS = 0x0010; /// true = 3d chart has walls/floor. +const sal_uInt16 EXC_CHCHART3D_2DWALLS = 0x0020; /// true = 2d wall/gridlines, no floor. + +// (0x103C) CHPICFORMAT ------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHPICFORMAT = 0x103C; + +const sal_uInt16 EXC_CHPICFORMAT_NONE = 0; /// For internal use only. +const sal_uInt16 EXC_CHPICFORMAT_STRETCH = 1; /// Bitmap stretched to area. +const sal_uInt16 EXC_CHPICFORMAT_STACK = 2; /// Bitmap stacked. +const sal_uInt16 EXC_CHPICFORMAT_SCALE = 3; /// Bitmap scaled to axis scale. + +const sal_uInt16 EXC_CHPICFORMAT_TOPBOTTOM = 0x0200; +const sal_uInt16 EXC_CHPICFORMAT_FRONTBACK = 0x0400; +const sal_uInt16 EXC_CHPICFORMAT_LEFTRIGHT = 0x0800; + +// (0x103D) CHDROPBAR --------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHDROPBAR = 0x103D; + +const sal_uInt16 EXC_CHDROPBAR_UP = 0; +const sal_uInt16 EXC_CHDROPBAR_DOWN = 1; +const sal_uInt16 EXC_CHDROPBAR_NONE = 0xFFFF; + +// (0x103E, 0x1040) CHRADARLINE, CHRADARAREA ---------------------------------- + +const sal_uInt16 EXC_ID_CHRADARLINE = 0x103E; +const sal_uInt16 EXC_ID_CHRADARAREA = 0x1040; + +const sal_uInt16 EXC_CHRADAR_AXISLABELS = 0x0001; +const sal_uInt16 EXC_CHRADAR_SHADOW = 0x0002; + +// (0x103F) CHSURFACE --------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHSURFACE = 0x103F; + +const sal_uInt16 EXC_CHSURFACE_FILLED = 0x0001; +const sal_uInt16 EXC_CHSURFACE_SHADING = 0x0002; + +// (0x1041) CHAXESSET --------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHAXESSET = 0x1041; + +const sal_uInt16 EXC_CHAXESSET_PRIMARY = 0; +const sal_uInt16 EXC_CHAXESSET_SECONDARY = 1; +const sal_uInt16 EXC_CHAXESSET_NONE = 0xFFFF; /// For internal use. + +// (0x1043) LEGENDEXCEPTION + +const sal_uInt16 EXC_ID_CHLEGENDEXCEPTION = 0x1043; + +const sal_uInt16 EXC_CHLEGENDEXCEPTION_DELETED = 0x0001; +const sal_uInt16 EXC_CHLEGENDEXCEPTION_LABEL = 0x0002; + +// (0x1044) CHPROPERTIES ------------------------------------------------------ + +const sal_uInt16 EXC_ID_CHPROPERTIES = 0x1044; + +const sal_uInt16 EXC_CHPROPS_MANSERIES = 0x0001; /// Manual series allocation. +const sal_uInt16 EXC_CHPROPS_SHOWVISIBLEONLY = 0x0002; /// Show visible cells only. +const sal_uInt16 EXC_CHPROPS_NORESIZE = 0x0004; /// Do not resize chart with window. +const sal_uInt16 EXC_CHPROPS_MANPLOTAREA = 0x0008; /// Manual plot area mode. +const sal_uInt16 EXC_CHPROPS_USEMANPLOTAREA = 0x0010; /// Manual plot area layout in CHFRAMEPOS record. + +const sal_uInt8 EXC_CHPROPS_EMPTY_SKIP = 0; /// Skip empty values. +const sal_uInt8 EXC_CHPROPS_EMPTY_ZERO = 1; /// Plot empty values as zero. +const sal_uInt8 EXC_CHPROPS_EMPTY_INTERPOLATE = 2; /// Interpolate empty values. + +// (0x1045) CHSERGROUP -------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHSERGROUP = 0x1045; + +const sal_uInt16 EXC_CHSERGROUP_NONE = 0xFFFF; /// For internal use: no chart type group. + +// (0x1048, 0x0858) CHPIVOTREF ------------------------------------------------ + +const sal_uInt16 EXC_ID5_CHPIVOTREF = 0x1048; +const sal_uInt16 EXC_ID8_CHPIVOTREF = 0x0858; + +// (0x104A) CHSERPARENT ------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHSERPARENT = 0x104A; + +// (0x104B) CHSERTRENDLINE ---------------------------------------------------- + +const sal_uInt16 EXC_ID_CHSERTRENDLINE = 0x104B; + +const sal_uInt8 EXC_CHSERTREND_POLYNOMIAL = 0; /// If order is 1, trend line is linear. +const sal_uInt8 EXC_CHSERTREND_EXPONENTIAL = 1; +const sal_uInt8 EXC_CHSERTREND_LOGARITHMIC = 2; +const sal_uInt8 EXC_CHSERTREND_POWER = 3; +const sal_uInt8 EXC_CHSERTREND_MOVING_AVG = 4; + +// (0x104E) CHFORMAT ---------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHFORMAT = 0x104E; + +// (0x104F) CHFRAMEPOS -------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHFRAMEPOS = 0x104F; + +const sal_uInt16 EXC_CHFRAMEPOS_POINTS = 0; +const sal_uInt16 EXC_CHFRAMEPOS_ABSSIZE_POINTS = 1; +const sal_uInt16 EXC_CHFRAMEPOS_PARENT = 2; +const sal_uInt16 EXC_CHFRAMEPOS_DEFOFFSET_PLOT = 3; +const sal_uInt16 EXC_CHFRAMEPOS_CHARTSIZE = 5; + +// (0x1050) CHFORMATRUNS ------------------------------------------------------ + +const sal_uInt16 EXC_ID_CHFORMATRUNS = 0x1050; + +// (0x1051) CHSOURCELINK ------------------------------------------------------ + +const sal_uInt16 EXC_ID_CHSOURCELINK = 0x1051; + +const sal_uInt8 EXC_CHSRCLINK_TITLE = 0; +const sal_uInt8 EXC_CHSRCLINK_VALUES = 1; +const sal_uInt8 EXC_CHSRCLINK_CATEGORY = 2; +const sal_uInt8 EXC_CHSRCLINK_BUBBLES = 3; + +const sal_uInt8 EXC_CHSRCLINK_DEFAULT = 0; +const sal_uInt8 EXC_CHSRCLINK_DIRECTLY = 1; +const sal_uInt8 EXC_CHSRCLINK_WORKSHEET = 2; + +const sal_uInt16 EXC_CHSRCLINK_NUMFMT = 0x0001; + +// (0x105B) CHSERERRORBAR ----------------------------------------------------- + +const sal_uInt16 EXC_ID_CHSERERRORBAR = 0x105B; + +const sal_uInt8 EXC_CHSERERR_NONE = 0; /// For internal use only. +const sal_uInt8 EXC_CHSERERR_XPLUS = 1; +const sal_uInt8 EXC_CHSERERR_XMINUS = 2; +const sal_uInt8 EXC_CHSERERR_YPLUS = 3; +const sal_uInt8 EXC_CHSERERR_YMINUS = 4; + +const sal_uInt8 EXC_CHSERERR_PERCENT = 1; +const sal_uInt8 EXC_CHSERERR_FIXED = 2; +const sal_uInt8 EXC_CHSERERR_STDDEV = 3; +const sal_uInt8 EXC_CHSERERR_CUSTOM = 4; +const sal_uInt8 EXC_CHSERERR_STDERR = 5; + +const sal_uInt8 EXC_CHSERERR_END_BLANK = 0; /// Line end: blank. +const sal_uInt8 EXC_CHSERERR_END_TSHAPE = 1; /// Line end: t-shape. + +// (0x105D) CHSERIESFORMAT ---------------------------------------------------- + +const sal_uInt16 EXC_ID_CHSERIESFORMAT = 0x105D; + +const sal_uInt16 EXC_CHSERIESFORMAT_SMOOTHED = 0x0001; +const sal_uInt16 EXC_CHSERIESFORMAT_BUBBLE3D = 0x0002; +const sal_uInt16 EXC_CHSERIESFORMAT_SHADOW = 0x0004; + +// (0x105F) CH3DDATAFORMAT ---------------------------------------------------- + +const sal_uInt16 EXC_ID_CH3DDATAFORMAT = 0x105F; + +const sal_uInt8 EXC_CH3DDATAFORMAT_RECT = 0; /// Rectangular base. +const sal_uInt8 EXC_CH3DDATAFORMAT_CIRC = 1; /// Circular base. + +const sal_uInt8 EXC_CH3DDATAFORMAT_STRAIGHT = 0; /// Straight to top. +const sal_uInt8 EXC_CH3DDATAFORMAT_SHARP = 1; /// Sharp top. +const sal_uInt8 EXC_CH3DDATAFORMAT_TRUNC = 2; /// Sharp top, truncated. + +// (0x1061) CHPIEEXT ---------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHPIEEXT = 0x1061; + +// (0x1062) CHDATERANGE ------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHDATERANGE = 0x1062; + +const sal_uInt16 EXC_CHDATERANGE_AUTOMIN = 0x0001; +const sal_uInt16 EXC_CHDATERANGE_AUTOMAX = 0x0002; +const sal_uInt16 EXC_CHDATERANGE_AUTOMAJOR = 0x0004; +const sal_uInt16 EXC_CHDATERANGE_AUTOMINOR = 0x0008; +const sal_uInt16 EXC_CHDATERANGE_DATEAXIS = 0x0010; +const sal_uInt16 EXC_CHDATERANGE_AUTOBASE = 0x0020; +const sal_uInt16 EXC_CHDATERANGE_AUTOCROSS = 0x0040; /// Other axis crosses at own maximum. +const sal_uInt16 EXC_CHDATERANGE_AUTODATE = 0x0080; /// Recognize date/text automatically. + +const sal_uInt16 EXC_CHDATERANGE_DAYS = 0; +const sal_uInt16 EXC_CHDATERANGE_MONTHS = 1; +const sal_uInt16 EXC_CHDATERANGE_YEARS = 2; + +// (0x1066) CHESCHERFORMAT ---------------------------------------------------- + +const sal_uInt16 EXC_ID_CHESCHERFORMAT = 0x1066; + +// Other record IDs ----------------------------------------------------------- + +const sal_uInt16 EXC_ID_CHWRAPPEDRECORD = 0x0851; +const sal_uInt16 EXC_ID_CHUNITPROPERTIES = 0x0857; +const sal_uInt16 EXC_ID_CHUSEDAXESSETS = 0x1046; +const sal_uInt16 EXC_ID_CHLABELRANGE2 = 0x1062; +const sal_uInt16 EXC_ID_CHPLOTGROWTH = 0x1064; +const sal_uInt16 EXC_ID_CHSERINDEX = 0x1065; +const sal_uInt16 EXC_ID_CHUNKNOWN = 0xFFFF; + +// Structs and classes + +// Common ===================================================================== + +struct XclChRectangle +{ + sal_Int32 mnX; /// X position of the object in 1/4000 of chart width. + sal_Int32 mnY; /// Y position of the object in 1/4000 of chart height. + sal_Int32 mnWidth; /// Width of the object in 1/4000 of chart width. + sal_Int32 mnHeight; /// Height of the object in 1/4000 of chart height. + + explicit XclChRectangle(); +}; + +/** Specifies the position of a data series or data point. */ +struct XclChDataPointPos +{ + sal_uInt16 mnSeriesIdx; /// Series index of series or a data point. + sal_uInt16 mnPointIdx; /// Index of a data point inside a series. + + explicit XclChDataPointPos( + sal_uInt16 nSeriesIdx = EXC_CHSERIES_INVALID, + sal_uInt16 nPointIdx = EXC_CHDATAFORMAT_ALLPOINTS ); +}; + +bool operator<( const XclChDataPointPos& rL, const XclChDataPointPos& rR ); + +/** Contains the type and context of a block of future records which are + guarded by CHFRBLOCKBEGIN and CHFRBLOCKEND records. */ +struct XclChFrBlock +{ + sal_uInt16 mnType; /// Type of the future record block. + sal_uInt16 mnContext; /// Context dependent on type. + sal_uInt16 mnValue1; /// Optional primary value for current context. + sal_uInt16 mnValue2; /// Optional secondary value for current context. + + explicit XclChFrBlock( sal_uInt16 nType ); +}; + +// Frame formatting =========================================================== + +struct XclChFramePos +{ + XclChRectangle maRect; /// Object dependent position data. + sal_uInt16 mnTLMode; /// Top-left position mode. + sal_uInt16 mnBRMode; /// Bottom-right position mode. + + explicit XclChFramePos(); +}; + +struct XclChLineFormat +{ + Color maColor; /// Line color. + sal_uInt16 mnPattern; /// Line pattern (solid, dashed, ...). + sal_Int16 mnWeight; /// Line weight (hairline, single, ...). + sal_uInt16 mnFlags; /// Additional flags. + + explicit XclChLineFormat(); +}; + +struct XclChAreaFormat +{ + Color maPattColor; /// Pattern color. + Color maBackColor; /// Pattern background color. + sal_uInt16 mnPattern; /// Fill pattern. + sal_uInt16 mnFlags; /// Additional flags. + + explicit XclChAreaFormat(); +}; + +class SfxItemSet; +class EscherPropertyContainer; + +struct XclChEscherFormat +{ + typedef std::shared_ptr< SfxItemSet > SfxItemSetRef; + typedef std::shared_ptr< EscherPropertyContainer > EscherPropSetRef; + + SfxItemSetRef mxItemSet; /// Item set for Escher properties import. + EscherPropSetRef mxEscherSet; /// Container for Escher properties export. + + explicit XclChEscherFormat(); + ~XclChEscherFormat(); +}; + +struct XclChPicFormat +{ + sal_uInt16 mnBmpMode; /// Bitmap mode, e.g. stretched, stacked. + sal_uInt16 mnFlags; /// Additional flags. + double mfScale; /// Picture scaling (units). + + explicit XclChPicFormat(); +}; + +struct XclChFrame +{ + sal_uInt16 mnFormat; /// Format type of the frame. + sal_uInt16 mnFlags; /// Additional flags. + + explicit XclChFrame(); +}; + +// Source links =============================================================== + +struct XclChSourceLink +{ + sal_uInt8 mnDestType; /// Type of the destination (title, values, ...). + sal_uInt8 mnLinkType; /// Link type (directly, linked to worksheet, ...). + sal_uInt16 mnFlags; /// Additional flags. + sal_uInt16 mnNumFmtIdx; /// Number format index. + + explicit XclChSourceLink(); +}; + +// Text ======================================================================= + +struct XclChObjectLink +{ + XclChDataPointPos maPointPos; /// Position of the data point. + sal_uInt16 mnTarget; /// Target of the link. + + explicit XclChObjectLink(); +}; + +struct XclChFrLabelProps +{ + OUString maSeparator; /// Separator between label values. + sal_uInt16 mnFlags; /// Flags indicating which values to be displayed. + + explicit XclChFrLabelProps(); +}; + +struct XclChText +{ + XclChRectangle maRect; /// Position of the text object. + Color maTextColor; /// Text color. + sal_uInt8 mnHAlign; /// Horizontal alignment. + sal_uInt8 mnVAlign; /// Vertical alignment. + sal_uInt16 mnBackMode; /// Background mode: transparent, opaque. + sal_uInt16 mnFlags; /// Additional flags. + sal_uInt16 mnFlags2; /// Text object placement and text direction (BIFF8+). + sal_uInt16 mnRotation; /// Text object rotation (BIFF8+). + + explicit XclChText(); +}; + +// Data series ================================================================ + +struct XclChMarkerFormat +{ + Color maLineColor; /// Border line color. + Color maFillColor; /// Fill color. + sal_uInt32 mnMarkerSize; /// Size of a marker + sal_uInt16 mnMarkerType; /// Marker type (none, diamond, ...). + sal_uInt16 mnFlags; /// Additional flags. + + explicit XclChMarkerFormat(); +}; + +struct XclCh3dDataFormat +{ + sal_uInt8 mnBase; /// Base form. + sal_uInt8 mnTop; /// Top edge mode. + + explicit XclCh3dDataFormat(); +}; + +struct XclChDataFormat +{ + XclChDataPointPos maPointPos; /// Position of the data point or series. + sal_uInt16 mnFormatIdx; /// Formatting index for automatic colors. + sal_uInt16 mnFlags; /// Additional flags. + + explicit XclChDataFormat(); +}; + +struct XclChSerTrendLine +{ + double mfIntercept; /// Forced intercept. + double mfForecastFor; /// Counter to forecast forward. + double mfForecastBack; /// Counter to forecast backward. + sal_uInt8 mnLineType; /// Type of the trend line. + sal_uInt8 mnOrder; /// Polynomial order or moving average counter. + sal_uInt8 mnShowEquation; /// 1 = Show equation. + sal_uInt8 mnShowRSquared; /// 1 = Show R-squared. + + explicit XclChSerTrendLine(); +}; + +struct XclChSerErrorBar +{ + double mfValue; /// Fixed value for several source types. + sal_uInt16 mnValueCount; /// Number of custom error values. + sal_uInt8 mnBarType; /// Type of the error bar (X/Y). + sal_uInt8 mnSourceType; /// Type of source values. + sal_uInt8 mnLineEnd; /// Type of the line ends. + + explicit XclChSerErrorBar(); +}; + +struct XclChSeries +{ + sal_uInt16 mnCategType; /// Data type for category entries. + sal_uInt16 mnValueType; /// Data type for value entries. + sal_uInt16 mnBubbleType; /// Data type for bubble entries. + sal_uInt16 mnCategCount; /// Number of category entries. + sal_uInt16 mnValueCount; /// Number of value entries. + sal_uInt16 mnBubbleCount; /// Number of bubble entries. + + explicit XclChSeries(); +}; + +// Chart type groups ========================================================== + +struct XclChType +{ + sal_Int16 mnOverlap; /// Bar overlap width (CHBAR). + sal_Int16 mnGap; /// Gap between bars (CHBAR). + sal_uInt16 mnRotation; /// Rotation angle of first pie (CHPIE). + sal_uInt16 mnPieHole; /// Hole size in donut chart (CHPIE). + sal_uInt16 mnBubbleSize; /// Bubble size in bubble chart (CHSCATTER). + sal_uInt16 mnBubbleType; /// Bubble type in bubble chart (CHSCATTER). + sal_uInt16 mnFlags; /// Additional flags (all chart types). + + explicit XclChType(); +}; + +struct XclChChart3d +{ + sal_uInt16 mnRotation; /// Rotation (0...359deg). + sal_Int16 mnElevation; /// Elevation (-90...+90deg). + sal_uInt16 mnEyeDist; /// Eye distance to chart (0...100). + sal_uInt16 mnRelHeight; /// Height relative to width. + sal_uInt16 mnRelDepth; /// Depth relative to width. + sal_uInt16 mnDepthGap; /// Space between series. + sal_uInt16 mnFlags; /// Additional flags. + + explicit XclChChart3d(); +}; + +struct XclChLegend +{ + XclChRectangle maRect; /// Position of the legend. + sal_uInt8 mnDockMode; /// Docking mode. + sal_uInt8 mnSpacing; /// Spacing between elements. + sal_uInt16 mnFlags; /// Additional flags. + + explicit XclChLegend(); +}; + +struct XclChTypeGroup +{ + sal_uInt16 mnFlags; /// Additional flags. + sal_uInt16 mnGroupIdx; /// Chart type group index. + + explicit XclChTypeGroup(); +}; + +struct XclChProperties +{ + sal_uInt16 mnFlags; /// Additional flags. + sal_uInt8 mnEmptyMode; /// Plotting mode for empty cells. + + explicit XclChProperties(); +}; + +// Axes ======================================================================= + +struct XclChLabelRange +{ + sal_uInt16 mnCross; /// Crossing position of other axis. + sal_uInt16 mnLabelFreq; /// Frequency of labels. + sal_uInt16 mnTickFreq; /// Frequency of ticks. + sal_uInt16 mnFlags; /// Additional flags. + + explicit XclChLabelRange(); +}; + +struct XclChDateRange +{ + sal_uInt16 mnMinDate; /// Minimum value on axis. + sal_uInt16 mnMaxDate; /// Maximum value on axis. + sal_uInt16 mnMajorStep; /// Distance for major grid lines. + sal_uInt16 mnMajorUnit; /// Time unit for major step. + sal_uInt16 mnMinorStep; /// Distance for minor grid lines. + sal_uInt16 mnMinorUnit; /// Time unit for minor step. + sal_uInt16 mnBaseUnit; /// Time unit for axis values. + sal_uInt16 mnCross; /// Crossing position of other axis. + sal_uInt16 mnFlags; /// Additional flags. + + explicit XclChDateRange(); +}; + +struct XclChValueRange +{ + double mfMin; /// Minimum value on axis. + double mfMax; /// Maximum value on axis. + double mfMajorStep; /// Distance for major grid lines. + double mfMinorStep; /// Distance for minor grid lines. + double mfCross; /// Crossing position of other axis. + sal_uInt16 mnFlags; /// Additional flags. + + explicit XclChValueRange(); +}; + +struct XclChTick +{ + Color maTextColor; /// Tick labels color. + sal_uInt8 mnMajor; /// Type of tick marks of major grid. + sal_uInt8 mnMinor; /// Type of tick marks of minor grid. + sal_uInt8 mnLabelPos; /// Position of labels relative to axis. + sal_uInt8 mnBackMode; /// Background mode: transparent, opaque. + sal_uInt16 mnFlags; /// Additional flags. + sal_uInt16 mnRotation; /// Tick labels angle (BIFF8+). + + explicit XclChTick(); +}; + +struct XclChAxis +{ + sal_uInt16 mnType; /// Axis type. + + explicit XclChAxis(); + + /** Returns the axis dimension index used by the chart API. */ + sal_Int32 GetApiAxisDimension() const; +}; + +struct XclChAxesSet +{ + XclChRectangle maRect; /// Position of the axes set (inner plot area). + sal_uInt16 mnAxesSetId; /// Primary/secondary axes set. + + explicit XclChAxesSet(); + + /** Returns the axes set index used by the chart API. */ + sal_Int32 GetApiAxesSetIndex() const; +}; + +// Property mode ============================================================== + +/** Specifies the type of a formatting. This results in different property names. */ +enum XclChPropertyMode +{ + EXC_CHPROPMODE_COMMON, /// Common objects, no special handling. + EXC_CHPROPMODE_LINEARSERIES, /// Specific to data series drawn as lines. + EXC_CHPROPMODE_FILLEDSERIES /// Specific to data series drawn as areas. +}; + +// Static helper functions ==================================================== + +/** Contains static helper functions for the chart filters. */ +class XclChartHelper +{ +public: + /** Returns a palette index for automatic series line colors. */ + static sal_uInt16 GetSeriesLineAutoColorIdx( sal_uInt16 nFormatIdx ); + /** Returns a palette index for automatic series fill colors. */ + static sal_uInt16 GetSeriesFillAutoColorIdx( sal_uInt16 nFormatIdx ); + /** Returns a transparency value for automatic series fill colors. */ + static sal_uInt8 GetSeriesFillAutoTransp( sal_uInt16 nFormatIdx ); + /** Returns an automatic symbol index for the passed format index. */ + static sal_uInt16 GetAutoMarkerType( sal_uInt16 nFormatIdx ); + /** Returns true, if the passed marker type is filled. */ + static bool HasMarkerFillColor( sal_uInt16 nMarkerType ); + /** Returns the role name for a manual data source for error bars. */ + static OUString GetErrorBarValuesRole( sal_uInt8 nBarType ); +}; + +// Chart formatting info provider ============================================= + +/** Enumerates different object types for specific automatic formatting behaviour. */ +enum XclChObjectType +{ + EXC_CHOBJTYPE_BACKGROUND, /// Chart background. + EXC_CHOBJTYPE_PLOTFRAME, /// Wall formatting in 2d charts. + EXC_CHOBJTYPE_WALL3D, /// Wall formatting in 3d charts. + EXC_CHOBJTYPE_FLOOR3D, /// Floor formatting in 3d charts. + EXC_CHOBJTYPE_TEXT, /// Text boxes (titles, data point labels). + EXC_CHOBJTYPE_LEGEND, /// Chart legend. + EXC_CHOBJTYPE_LINEARSERIES, /// Series formatting in a chart supporting line formatting only. + EXC_CHOBJTYPE_FILLEDSERIES, /// Series formatting in a chart supporting area formatting. + EXC_CHOBJTYPE_AXISLINE, /// Axis line format. + EXC_CHOBJTYPE_GRIDLINE, /// Axis grid line format. + EXC_CHOBJTYPE_TRENDLINE, /// Series trend line. + EXC_CHOBJTYPE_ERRORBAR, /// Series error bar. + EXC_CHOBJTYPE_CONNECTLINE, /// Data point connector line. + EXC_CHOBJTYPE_HILOLINE, /// High/low lines in stock charts. + EXC_CHOBJTYPE_WHITEDROPBAR, /// White-day drop bar in stock charts. + EXC_CHOBJTYPE_BLACKDROPBAR /// Black-day drop bar in stock charts. +}; + +/** Enumerates different types to handle missing frame objects. */ +enum XclChFrameType +{ + EXC_CHFRAMETYPE_AUTO, /// Missing frame represents automatic formatting. + EXC_CHFRAMETYPE_INVISIBLE /// Missing frame represents invisible formatting. +}; + +/** Contains information about auto formatting of a specific chart object type. */ +struct XclChFormatInfo +{ + XclChObjectType meObjType; /// Object type for automatic format. + XclChPropertyMode mePropMode; /// Property mode for property set helper. + sal_uInt16 mnAutoLineColorIdx; /// Automatic line color index. + sal_Int16 mnAutoLineWeight; /// Automatic line weight (hairline, single, ...). + sal_uInt16 mnAutoPattColorIdx; /// Automatic fill pattern color index. + XclChFrameType meDefFrameType; /// Default format type for missing frame objects. + bool mbCreateDefFrame; /// true = Create missing frame objects on import. + bool mbDeleteDefFrame; /// true = Delete default frame formatting on export. + bool mbIsFrame; /// true = Object is a frame, false = Object is a line. +}; + +/** Provides access to chart auto formatting for all available object types. */ +class XclChFormatInfoProvider +{ +public: + explicit XclChFormatInfoProvider(); + + /** Returns an info struct about auto formatting for the passed object type. */ + const XclChFormatInfo& GetFormatInfo( XclChObjectType eObjType ) const; + +private: + typedef ::std::map< XclChObjectType, const XclChFormatInfo* > XclFmtInfoMap; + XclFmtInfoMap maInfoMap; /// Maps object type to formatting data. +}; + +// Chart type info provider =================================================== + +/** Enumerates all kinds of different chart types. */ +enum XclChTypeId +{ + EXC_CHTYPEID_BAR, /// Vertical bar chart. + EXC_CHTYPEID_HORBAR, /// Horizontal bar chart. + EXC_CHTYPEID_LINE, /// Line chart. + EXC_CHTYPEID_AREA, /// Area chart. + EXC_CHTYPEID_STOCK, /// Stock chart. + EXC_CHTYPEID_RADARLINE, /// Linear radar chart. + EXC_CHTYPEID_RADARAREA, /// Filled radar chart. + EXC_CHTYPEID_PIE, /// Pie chart. + EXC_CHTYPEID_DONUT, /// Donut chart. + EXC_CHTYPEID_PIEEXT, /// Pie-to-pie or pie-to-bar chart. + EXC_CHTYPEID_SCATTER, /// Scatter (XY) chart. + EXC_CHTYPEID_BUBBLES, /// Bubble chart. + EXC_CHTYPEID_SURFACE, /// Surface chart. + EXC_CHTYPEID_UNKNOWN /// Default for unknown chart types. +}; + +/** Enumerates different categories of similar chart types. */ +enum XclChTypeCateg +{ + EXC_CHTYPECATEG_BAR, /// Bar charts (horizontal or vertical). + EXC_CHTYPECATEG_LINE, /// Line charts (line, area, stock charts). + EXC_CHTYPECATEG_RADAR, /// Radar charts (linear or filled). + EXC_CHTYPECATEG_PIE, /// Pie and donut charts. + EXC_CHTYPECATEG_SCATTER, /// Scatter and bubble charts. + EXC_CHTYPECATEG_SURFACE /// Surface charts. +}; + +/** Enumerates modes for varying point colors in a series. */ +enum XclChVarPointMode +{ + EXC_CHVARPOINT_NONE, /// No varied colors supported. + EXC_CHVARPOINT_SINGLE, /// Only supported, if type group contains only one series. + EXC_CHVARPOINT_MULTI /// Supported for multiple series in a chart type group. +}; + +/** Contains information for a chart type. */ +struct XclChTypeInfo +{ + XclChTypeId meTypeId; /// Unique chart type identifier. + XclChTypeCateg meTypeCateg; /// Chart type category this type belongs to. + sal_uInt16 mnRecId; /// Record identifier written to the file. + const char* mpcServiceName; /// Service name of the type. + XclChVarPointMode meVarPointMode; /// Mode for varying point colors. + sal_Int32 mnDefaultLabelPos; /// Default data label position (API constant). + bool mbCombinable2d; /// true = Types can be combined in one axes set. + bool mbSupports3d; /// true = 3d type allowed, false = Only 2d type. + bool mbPolarCoordSystem; /// true = Polar, false = Cartesian. + bool mbSeriesIsFrame2d; /// true = Series with area formatting (2d charts). + bool mbSeriesIsFrame3d; /// true = Series with area formatting (3d charts). + bool mbSingleSeriesVis; /// true = Only first series visible. + bool mbCategoryAxis; /// true = X axis contains categories. + bool mbSwappedAxesSet; /// true = X and Y axes are swapped. + bool mbSupportsStacking; /// true = Series can be stacked on each other. + bool mbReverseSeries; /// true = Insert unstacked series in reverse order. + bool mbTicksBetweenCateg; /// true = X axis ticks between categories. +}; + +/** Extended chart type information and access functions. */ +struct XclChExtTypeInfo : public XclChTypeInfo +{ + bool mb3dChart; /// Chart is actually a 3D chart. + bool mbSpline; /// Series lines are smoothed. + + explicit XclChExtTypeInfo( const XclChTypeInfo& rTypeInfo ); + + void Set( const XclChTypeInfo& rTypeInfo, bool b3dChart, bool bSpline ); + + /** Returns true, if this chart type supports area formatting for its series. */ + bool IsSeriesFrameFormat() const + { return mb3dChart ? mbSeriesIsFrame3d : mbSeriesIsFrame2d; } + /** Returns the correct object type identifier for series and data points. */ + XclChObjectType GetSeriesObjectType() const + { return IsSeriesFrameFormat() ? EXC_CHOBJTYPE_FILLEDSERIES : EXC_CHOBJTYPE_LINEARSERIES; } +}; + +/** Provides access to chart type info structs for all available chart types. */ +class XclChTypeInfoProvider +{ +public: + explicit XclChTypeInfoProvider(); + + /** Returns chart type info for a unique chart type identifier. */ + const XclChTypeInfo& GetTypeInfo( XclChTypeId eType ) const; + /** Returns the first fitting chart type info for an Excel chart type record identifier. */ + const XclChTypeInfo& GetTypeInfoFromRecId( sal_uInt16 nRecId ) const; + /** Returns the first fitting chart type info for the passed service name. */ + const XclChTypeInfo& GetTypeInfoFromService( std::u16string_view rServiceName ) const; + +private: + typedef ::std::map< XclChTypeId, const XclChTypeInfo* > XclChTypeInfoMap; + XclChTypeInfoMap maInfoMap; /// Maps chart types to type info data. +}; + +// Chart text and title object helpers ======================================== + +/** Enumerates different text box types for default text formatting and title + positioning. */ +enum XclChTextType +{ + EXC_CHTEXTTYPE_TITLE, /// Chart title. + EXC_CHTEXTTYPE_LEGEND, /// Chart legend. + EXC_CHTEXTTYPE_AXISTITLE, /// Chart axis titles. + EXC_CHTEXTTYPE_AXISLABEL, /// Chart axis labels. + EXC_CHTEXTTYPE_DATALABEL /// Data point labels. +}; + +/** A map key for text and title objects. */ +struct XclChTextKey : public ::std::pair< XclChTextType, ::std::pair< sal_uInt16, sal_uInt16 > > +{ + explicit XclChTextKey( XclChTextType eTextType, sal_uInt16 nMainIdx = 0, sal_uInt16 nSubIdx = 0 ) + { first = eTextType; second.first = nMainIdx; second.second = nSubIdx; } +}; + +/** Function prototype receiving a chart document and returning a title shape. */ +typedef css::uno::Reference< css::drawing::XShape > + (*XclChGetShapeFunc)( const css::uno::Reference< css::chart::XChartDocument >& ); + +// Property helpers =========================================================== + +class XclChObjectTable +{ +public: + explicit XclChObjectTable( css::uno::Reference< css::lang::XMultiServiceFactory > const & xFactory, + const OUString& rServiceName, const OUString& rObjNameBase ); + + /** Returns a named formatting object from the chart document. */ + css::uno::Any GetObject( const OUString& rObjName ); + /** Inserts a named formatting object into the chart document. */ + OUString InsertObject( const css::uno::Any& rObj ); + +private: + css::uno::Reference< css::lang::XMultiServiceFactory > mxFactory; /// Factory to create the container. + css::uno::Reference< css::container::XNameContainer > mxContainer; /// Container for the objects. + OUString maServiceName; /// Service name to create the container. + OUString maObjNameBase; /// Base of names for inserted objects. + sal_Int32 mnIndex; /// Index to create unique identifiers. +}; + +/** Helper class for usage of property sets. */ +class XclChPropSetHelper +{ +public: + explicit XclChPropSetHelper(); + + /** Reads all line properties from the passed property set. */ + void ReadLineProperties( + XclChLineFormat& rLineFmt, + XclChObjectTable& rDashTable, + const ScfPropertySet& rPropSet, + XclChPropertyMode ePropMode ); + /** Reads solid area properties from the passed property set. + @return true = object contains complex fill properties. */ + bool ReadAreaProperties( + XclChAreaFormat& rAreaFmt, + const ScfPropertySet& rPropSet, + XclChPropertyMode ePropMode ); + /** Reads gradient or bitmap area properties from the passed property set. */ + void ReadEscherProperties( + XclChEscherFormat& rEscherFmt, + XclChPicFormat& rPicFmt, + XclChObjectTable& rGradientTable, + XclChObjectTable& rHatchTable, + XclChObjectTable& rBitmapTable, + const ScfPropertySet& rPropSet, + XclChPropertyMode ePropMode ); + /** Reads all marker properties from the passed property set. */ + static void ReadMarkerProperties( + XclChMarkerFormat& rMarkerFmt, + const ScfPropertySet& rPropSet, + sal_uInt16 nFormatIdx ); + /** Reads rotation properties from the passed property set. */ + static sal_uInt16 ReadRotationProperties( + const ScfPropertySet& rPropSet, + bool bSupportsStacked ); + + /** Writes all line properties to the passed property set. */ + void WriteLineProperties( + ScfPropertySet& rPropSet, + XclChObjectTable& rDashTable, + const XclChLineFormat& rLineFmt, + XclChPropertyMode ePropMode ); + /** Writes solid area properties to the passed property set. */ + void WriteAreaProperties( + ScfPropertySet& rPropSet, + const XclChAreaFormat& rAreaFmt, + XclChPropertyMode ePropMode ); + /** Writes gradient or bitmap area properties to the passed property set. */ + void WriteEscherProperties( + ScfPropertySet& rPropSet, + XclChObjectTable& rGradientTable, + XclChObjectTable& rBitmapTable, + const XclChEscherFormat& rEscherFmt, + const XclChPicFormat* pPicFmt, + sal_uInt32 nDffFillType, + XclChPropertyMode ePropMode ); + /** Writes all marker properties to the passed property set. */ + static void WriteMarkerProperties( + ScfPropertySet& rPropSet, + const XclChMarkerFormat& rMarkerFmt ); + /** Writes rotation properties to the passed property set. */ + static void WriteRotationProperties( + ScfPropertySet& rPropSet, + sal_uInt16 nRotation, + bool bSupportsStacked ); + +private: + /** Returns a line property set helper according to the passed property mode. */ + ScfPropSetHelper& GetLineHelper( XclChPropertyMode ePropMode ); + /** Returns an area property set helper according to the passed property mode. */ + ScfPropSetHelper& GetAreaHelper( XclChPropertyMode ePropMode ); + /** Returns a gradient property set helper according to the passed property mode. */ + ScfPropSetHelper& GetGradientHelper( XclChPropertyMode ePropMode ); + /** Returns a hatch property set helper according to the passed property mode. */ + ScfPropSetHelper& GetHatchHelper( XclChPropertyMode ePropMode ); + +private: + ScfPropSetHelper maLineHlpCommon; /// Properties for lines in common objects. + ScfPropSetHelper maLineHlpLinear; /// Properties for lines in linear series. + ScfPropSetHelper maLineHlpFilled; /// Properties for lines in filled series. + ScfPropSetHelper maAreaHlpCommon; /// Properties for areas in common objects. + ScfPropSetHelper maAreaHlpFilled; /// Properties for areas in filled series. + ScfPropSetHelper maGradHlpCommon; /// Properties for gradients in common objects. + ScfPropSetHelper maGradHlpFilled; /// Properties for gradients in filled series. + ScfPropSetHelper maHatchHlpCommon; /// Properties for hatches in common objects. + ScfPropSetHelper maHatchHlpFilled; /// Properties for hatches in filled series. + ScfPropSetHelper maBitmapHlp; /// Properties for bitmaps. +}; + +/** Base struct for internal root data structs for import and export. */ +struct XclChRootData +{ + typedef std::shared_ptr< XclChTypeInfoProvider > XclChTypeProvRef; + typedef std::shared_ptr< XclChFormatInfoProvider > XclChFmtInfoProvRef; + typedef std::shared_ptr< XclChObjectTable > XclChObjectTableRef; + typedef std::map< XclChTextKey, XclChGetShapeFunc > XclChGetShapeFuncMap; + + css::uno::Reference< css::chart2::XChartDocument > + mxChartDoc; /// The chart document. + tools::Rectangle maChartRect; /// Position and size of the chart shape. + XclChTypeProvRef mxTypeInfoProv; /// Provides info about chart types. + XclChFmtInfoProvRef mxFmtInfoProv; /// Provides info about auto formatting. + XclChObjectTableRef mxLineDashTable; /// Container for line dash styles. + XclChObjectTableRef mxGradientTable; /// Container for gradient fill styles. + XclChObjectTableRef mxHatchTable; /// Container for hatch fill styles. + XclChObjectTableRef mxBitmapTable; /// Container for bitmap fill styles. + XclChGetShapeFuncMap maGetShapeFuncs; /// Maps title shape getter functions. + sal_Int32 mnBorderGapX; /// Border gap to chart space in 1/100mm. + sal_Int32 mnBorderGapY; /// Border gap to chart space in 1/100mm. + double mfUnitSizeX; /// Size of a chart X unit (1/4000 of chart width) in 1/100 mm. + double mfUnitSizeY; /// Size of a chart Y unit (1/4000 of chart height) in 1/100 mm. + + explicit XclChRootData(); + virtual ~XclChRootData(); + + /** Starts the API chart document conversion. Must be called once before any API access. */ + void InitConversion( + const XclRoot& rRoot, + const css::uno::Reference< css::chart2::XChartDocument >& rxChartDoc, + const tools::Rectangle& rChartRect ); + /** Finishes the API chart document conversion. Must be called once before any API access. */ + void FinishConversion(); + + /** Returns the drawing shape interface of the specified title object. */ + css::uno::Reference< css::drawing::XShape > + GetTitleShape( const XclChTextKey& rTitleKey ) const; +}; + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |