diff options
Diffstat (limited to 'sc/source/ui/drawfunc/fuins2.cxx')
| -rw-r--r-- | sc/source/ui/drawfunc/fuins2.cxx | 689 |
1 files changed, 689 insertions, 0 deletions
diff --git a/sc/source/ui/drawfunc/fuins2.cxx b/sc/source/ui/drawfunc/fuins2.cxx new file mode 100644 index 000000000..380a5b9ca --- /dev/null +++ b/sc/source/ui/drawfunc/fuins2.cxx @@ -0,0 +1,689 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <com/sun/star/embed/NoVisualAreaSizeException.hpp> +#include <com/sun/star/embed/Aspects.hpp> +#include <com/sun/star/embed/XEmbeddedObject.hpp> +#include <com/sun/star/beans/XPropertySet.hpp> +#include <com/sun/star/uno/XComponentContext.hpp> + +#include <toolkit/helper/vclunohelper.hxx> +#include <sot/exchange.hxx> +#include <svl/globalnameitem.hxx> +#include <sfx2/viewfrm.hxx> +#include <svl/stritem.hxx> +#include <svx/svdoole2.hxx> +#include <unotools/moduleoptions.hxx> +#include <svtools/insdlg.hxx> +#include <svtools/embedhlp.hxx> +#include <svx/svxdlg.hxx> +#include <comphelper/classids.hxx> +#include <svx/svdpagv.hxx> +#include <svx/svdpage.hxx> +#include <svx/svdundo.hxx> +#include <sfx2/msgpool.hxx> +#include <sfx2/msg.hxx> +#include <scmod.hxx> +#include <sal/log.hxx> +#include <tools/diagnose_ex.h> + +#include <comphelper/lok.hxx> +#include <comphelper/storagehelper.hxx> +#include <comphelper/propertysequence.hxx> +#include <com/sun/star/embed/EmbedVerbs.hpp> +#include <com/sun/star/beans/PropertyValue.hpp> +#include <com/sun/star/chart2/data/XDataReceiver.hpp> +#include <com/sun/star/chart2/XChartDocument.hpp> +#include <com/sun/star/ui/dialogs/XAsynchronousExecutableDialog.hpp> +#include <com/sun/star/lang/XInitialization.hpp> +#include <com/sun/star/frame/XModel.hpp> +#include <com/sun/star/chart/ChartDataRowSource.hpp> +#include <cppuhelper/bootstrap.hxx> +#include <svtools/dialogclosedlistener.hxx> + +#include <PivotTableDataProvider.hxx> +#include <chart2uno.hxx> +#include <fuinsert.hxx> +#include <tabvwsh.hxx> +#include <sc.hrc> +#include <chartpos.hxx> +#include <docsh.hxx> +#include <document.hxx> +#include <undotab.hxx> +#include <uiitems.hxx> +#include <drawview.hxx> +#include <markdata.hxx> +#include <dpobject.hxx> +#include <memory> + +using namespace css; + +namespace +{ + +void lcl_ChartInit(const uno::Reference <embed::XEmbeddedObject>& xObj, ScViewData* pViewData, + const OUString& rRangeParam, bool bRangeIsPivotTable) +{ + ScDocShell* pDocShell = pViewData->GetDocShell(); + ScDocument& rScDoc = pDocShell->GetDocument(); + + OUString aRangeString(rRangeParam); + + if (aRangeString.isEmpty() && !bRangeIsPivotTable) + { + SCCOL nCol1 = 0; + SCROW nRow1 = 0; + SCTAB nTab1 = 0; + SCCOL nCol2 = 0; + SCROW nRow2 = 0; + SCTAB nTab2 = 0; + + ScMarkData& rMark = pViewData->GetMarkData(); + if ( !rMark.IsMarked() ) + pViewData->GetView()->MarkDataArea(); + + if ( pViewData->GetSimpleArea( nCol1,nRow1,nTab1, nCol2,nRow2,nTab2 ) == SC_MARK_SIMPLE ) + { + PutInOrder( nCol1, nCol2 ); + PutInOrder( nRow1, nRow2 ); + if (nCol2 >= nCol1 || nRow2 >= nRow1) + { + ScDocument& rDoc = pViewData->GetDocument(); + rDoc.LimitChartArea( nTab1, nCol1,nRow1, nCol2,nRow2 ); + + ScRange aRange( nCol1, nRow1, nTab1, nCol2, nRow2, nTab2 ); + aRangeString = aRange.Format(rScDoc, ScRefFlags::RANGE_ABS_3D, rScDoc.GetAddressConvention()); + } + } + } + + if (aRangeString.isEmpty()) + return; + + // connect to Calc data (if no range string, leave chart alone, with its own data) + + uno::Reference< css::chart2::data::XDataReceiver > xReceiver; + if( xObj.is()) + xReceiver.set( xObj->getComponent(), uno::UNO_QUERY ); + OSL_ASSERT( xReceiver.is()); + if( !xReceiver.is() ) + return; + + uno::Reference<chart2::data::XDataProvider> xDataProvider; + if (bRangeIsPivotTable) + { + rtl::Reference<sc::PivotTableDataProvider> pPivotTableDataProvider(new sc::PivotTableDataProvider(rScDoc)); + pPivotTableDataProvider->setPivotTableName(aRangeString); + xDataProvider = pPivotTableDataProvider; + } + else + { + xDataProvider.set(new ScChart2DataProvider(&rScDoc)); + } + + xReceiver->attachDataProvider(xDataProvider); + + uno::Reference< util::XNumberFormatsSupplier > xNumberFormatsSupplier( pDocShell->GetModel(), uno::UNO_QUERY ); + xReceiver->attachNumberFormatsSupplier( xNumberFormatsSupplier ); + + // Same behavior as with old chart: Always assume data series in columns + chart::ChartDataRowSource eDataRowSource = chart::ChartDataRowSource_COLUMNS; + bool bHasCategories = false; + bool bFirstCellAsLabel = false; + + // use ScChartPositioner to auto-detect column/row headers (like ScChartArray in old version) + ScRangeListRef aRangeListRef( new ScRangeList ); + aRangeListRef->Parse( aRangeString, rScDoc, rScDoc.GetAddressConvention() ); + if ( !aRangeListRef->empty() ) + { + rScDoc.LimitChartIfAll( aRangeListRef ); // limit whole columns/rows to used area + + // update string from modified ranges. The ranges must be in the current formula syntax. + OUString aTmpStr; + aRangeListRef->Format( aTmpStr, ScRefFlags::RANGE_ABS_3D, rScDoc, rScDoc.GetAddressConvention() ); + aRangeString = aTmpStr; + + ScChartPositioner aChartPositioner( rScDoc, aRangeListRef ); + const ScChartPositionMap* pPositionMap( aChartPositioner.GetPositionMap() ); + if( pPositionMap ) + { + SCSIZE nRowCount = pPositionMap->GetRowCount(); + if( 1==nRowCount ) + eDataRowSource = chart::ChartDataRowSource_ROWS; + } + if ( eDataRowSource == chart::ChartDataRowSource_COLUMNS ) + { + bHasCategories = aChartPositioner.HasRowHeaders(); + bFirstCellAsLabel = aChartPositioner.HasColHeaders(); + } + else // in case the default is changed + { + bHasCategories = aChartPositioner.HasColHeaders(); + bFirstCellAsLabel = aChartPositioner.HasRowHeaders(); + } + } + + uno::Sequence< beans::PropertyValue > aArgs{ + beans::PropertyValue( + "CellRangeRepresentation", -1, + uno::Any( aRangeString ), beans::PropertyState_DIRECT_VALUE ), + beans::PropertyValue( + "HasCategories", -1, + uno::Any( bHasCategories ), beans::PropertyState_DIRECT_VALUE ), + beans::PropertyValue( + "FirstCellAsLabel", -1, + uno::Any( bFirstCellAsLabel ), beans::PropertyState_DIRECT_VALUE ), + beans::PropertyValue( + "DataRowSource", -1, + uno::Any( eDataRowSource ), beans::PropertyState_DIRECT_VALUE ) + }; + + try + { + xReceiver->setArguments( aArgs ); + } + catch (const lang::IllegalArgumentException&) + { + // Can happen for invalid aRangeString, in which case a Chart + // will be created nevertheless and the range string can be + // edited. + TOOLS_WARN_EXCEPTION("sc.ui", + "lcl_ChartInit - caught IllegalArgumentException might be due to aRangeString: " << aRangeString); + } + + // don't create chart listener here (range may be modified in chart dialog) +} + +} + +FuInsertOLE::FuInsertOLE(ScTabViewShell& rViewSh, vcl::Window* pWin, ScDrawView* pViewP, + SdrModel* pDoc, SfxRequest& rReq) + : FuPoor(rViewSh, pWin, pViewP, pDoc, rReq) +{ + if( ! rReq.IsAPI() ) + rReq.Done(); + + //! initialize DLLs here, so that the factories exist? + + uno::Reference < embed::XEmbeddedObject > xObj; + uno::Reference < embed::XStorage > xStorage = comphelper::OStorageHelper::GetTemporaryStorage(); + bool bIsFromFile = false; + OUString aName; + + sal_Int64 nAspect = embed::Aspects::MSOLE_CONTENT; + OUString aIconMediaType; + uno::Reference< io::XInputStream > xIconMetaFile; + + const sal_uInt16 nSlot = rReq.GetSlot(); + const SfxGlobalNameItem* pNameItem = rReq.GetArg<SfxGlobalNameItem>(SID_INSERT_OBJECT); + if ( nSlot == SID_INSERT_OBJECT && pNameItem ) + { + const SvGlobalName& aClassName = pNameItem->GetValue(); + xObj = rViewShell.GetViewFrame()->GetObjectShell()->GetEmbeddedObjectContainer().CreateEmbeddedObject( aClassName.GetByteSequence(), aName ); + } + else if ( nSlot == SID_INSERT_SMATH ) + { + if ( SvtModuleOptions().IsMath() ) + { + xObj = rViewShell.GetViewFrame()->GetObjectShell()->GetEmbeddedObjectContainer().CreateEmbeddedObject( SvGlobalName( SO3_SM_CLASSID_60 ).GetByteSequence(), aName ); + rReq.AppendItem( SfxGlobalNameItem( SID_INSERT_OBJECT, SvGlobalName( SO3_SM_CLASSID_60 ) ) ); + } + } + else + { + SvObjectServerList aServerLst; + switch ( nSlot ) + { + case SID_INSERT_OBJECT : + aServerLst.FillInsertObjects(); + aServerLst.Remove( ScDocShell::Factory().GetClassId() ); // Do not show Starcalc + //TODO/LATER: currently no inserting of ClassId into SfxRequest! + [[fallthrough]]; //TODO ??? + case SID_INSERT_FLOATINGFRAME : + { + SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create(); + ScopedVclPtr<SfxAbstractInsertObjectDialog> pDlg( + pFact->CreateInsertObjectDialog( rViewShell.GetFrameWeld(), SC_MOD()->GetSlotPool()->GetSlot(nSlot)->GetCommandString(), + xStorage, &aServerLst )); + if ( pDlg ) + { + pDlg->Execute(); + xObj = pDlg->GetObject(); + + xIconMetaFile = pDlg->GetIconIfIconified( &aIconMediaType ); + if ( xIconMetaFile.is() ) + nAspect = embed::Aspects::MSOLE_ICON; + + if ( xObj.is() ) + rViewSh.GetObjectShell()->GetEmbeddedObjectContainer().InsertEmbeddedObject( xObj, aName ); + // to activate DrawShell (no need to activate Object) + bIsFromFile = !pDlg->IsCreateNew(); + } + + break; + } + } + } + + // SvInsertObjectDialog (everything in one Dialog) are not used anymore + if (xObj.is()) + { + pView->UnmarkAll(); + + try + { + ::svt::EmbeddedObjectRef aObjRef( xObj, nAspect ); + Size aSize; + MapMode aMap100( MapUnit::Map100thMM ); + MapUnit aMapUnit = MapUnit::Map100thMM; + + if ( nAspect == embed::Aspects::MSOLE_ICON ) + { + aObjRef.SetGraphicStream( xIconMetaFile, aIconMediaType ); + aSize = aObjRef.GetSize( &aMap100 ); + } + else + { + awt::Size aSz; + try + { + aSz = xObj->getVisualAreaSize( nAspect ); + } + catch( embed::NoVisualAreaSizeException& ) + { + // the default size will be set later + } + + aSize = Size( aSz.Width, aSz.Height ); + + aMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObj->getMapUnit( nAspect ) ); + if (aSize.IsEmpty()) + { + // rectangle with balanced edge ratio + aSize.setWidth( 5000 ); + aSize.setHeight( 5000 ); + Size aTmp = OutputDevice::LogicToLogic(aSize, MapMode(MapUnit::Map100thMM), MapMode(aMapUnit)); + aSz.Width = aTmp.Width(); + aSz.Height = aTmp.Height(); + xObj->setVisualAreaSize( nAspect, aSz ); + + // re-convert aSize to 1/100th mm to avoid rounding errors in comparison below + aSize = OutputDevice::LogicToLogic( aTmp, + MapMode( aMapUnit ), aMap100 ); + } + else + aSize = OutputDevice::LogicToLogic( aSize, + MapMode( aMapUnit ), aMap100 ); + } + + // initialize chart ? + if ( SvtModuleOptions().IsChart() && SotExchange::IsChart( SvGlobalName( xObj->getClassID() ) ) ) + lcl_ChartInit(xObj, &rViewSh.GetViewData(), OUString(), false); + + ScViewData& rData = rViewSh.GetViewData(); + + Point aPnt = rViewSh.GetInsertPos(); + if ( rData.GetDocument().IsNegativePage( rData.GetTabNo() ) ) + aPnt.AdjustX( -(aSize.Width()) ); // move position to left edge + tools::Rectangle aRect (aPnt, aSize); + SdrOle2Obj* pObj = new SdrOle2Obj( + *pDoc, // TTTT should be reference + aObjRef, + aName, + aRect); + SdrPageView* pPV = pView->GetSdrPageView(); + bool bSuccess = pView->InsertObjectAtView(pObj, *pPV); + + if (bSuccess && nAspect != embed::Aspects::MSOLE_ICON) + { + // Math objects change their object size during InsertObject. + // New size must be set in SdrObject, or a wrong scale will be set at + // ActivateObject. + + try + { + awt::Size aSz = xObj->getVisualAreaSize( nAspect ); + + Size aNewSize( aSz.Width, aSz.Height ); + aNewSize = OutputDevice::LogicToLogic(aNewSize, MapMode(aMapUnit), MapMode(MapUnit::Map100thMM)); + + if ( aNewSize != aSize ) + { + aRect.SetSize( aNewSize ); + pObj->SetLogicRect( aRect ); + } + } + catch( embed::NoVisualAreaSizeException& ) + {} + } + + if ( !rReq.IsAPI() ) + { + // XXX Activate from macro is deadly !!! ??? + if (bIsFromFile) + { + // Object selected, activate Draw-Shell + rViewShell.SetDrawShell( true ); + } + else if (bSuccess) + { + rViewShell.ActivateObject(pObj, embed::EmbedVerbs::MS_OLEVERB_SHOW); + } + } + + rReq.Done(); + } + catch( uno::Exception& ) + { + OSL_FAIL( "May need error handling here!" ); + } + } + else + rReq.Ignore(); +} + +FuInsertChart::FuInsertChart(ScTabViewShell& rViewSh, vcl::Window* pWin, ScDrawView* pViewP, + SdrModel* pDoc, SfxRequest& rReq, const Link<css::ui::dialogs::DialogClosedEvent*, void>& rLink) + : FuPoor(rViewSh, pWin, pViewP, pDoc, rReq) +{ + const SfxItemSet* pReqArgs = rReq.GetArgs(); + + if( ! rReq.IsAPI() ) + rReq.Done(); + + if (!SvtModuleOptions().IsChart()) + return; + + // BM/IHA -- + + // get range + OUString aRangeString; + bool bRangeIsPivotTable = false; + ScRange aPositionRange; // cell range for chart positioning + ScMarkData aMark = rViewSh.GetViewData().GetMarkData(); + if( pReqArgs ) + { + const SfxPoolItem* pItem; + if( pReqArgs->HasItem( FN_PARAM_5, &pItem ) ) + aRangeString = static_cast<const SfxStringItem*>(pItem)->GetValue(); + + aPositionRange = rViewSh.GetViewData().GetCurPos(); + } + else + { + ScDocument& rDocument = rViewSh.GetViewData().GetDocument(); + ScDPObject* pObject = rDocument.GetDPAtCursor(rViewSh.GetViewData().GetCurX(), + rViewSh.GetViewData().GetCurY(), + rViewSh.GetViewData().GetTabNo()); + if (pObject) + { + aRangeString = pObject->GetName(); + bRangeIsPivotTable = true; + } + else + { + bool bAutomaticMark = false; + if ( !aMark.IsMarked() && !aMark.IsMultiMarked() ) + { + rViewSh.GetViewData().GetView()->MarkDataArea(); + bAutomaticMark = true; + } + + ScMarkData aMultiMark( aMark ); + aMultiMark.MarkToMulti(); + + ScRangeList aRanges; + aMultiMark.FillRangeListWithMarks( &aRanges, false ); + OUString aStr; + aRanges.Format( aStr, ScRefFlags::RANGE_ABS_3D, rDocument, rDocument.GetAddressConvention() ); + aRangeString = aStr; + + // get "total" range for positioning + if ( !aRanges.empty() ) + { + aPositionRange = aRanges[ 0 ]; + for ( size_t i = 1, nCount = aRanges.size(); i < nCount; ++i ) + { + aPositionRange.ExtendTo( aRanges[ i ] ); + } + } + + if(bAutomaticMark) + rViewSh.GetViewData().GetView()->Unmark(); + } + } + + // adapted old code + pView->UnmarkAll(); + + OUString aName; + const sal_Int64 nAspect = embed::Aspects::MSOLE_CONTENT; + + uno::Reference < embed::XEmbeddedObject > xObj = + rViewShell.GetObjectShell()->GetEmbeddedObjectContainer().CreateEmbeddedObject( SvGlobalName( SO3_SCH_CLASSID_60 ).GetByteSequence(), aName ); + + uno::Reference< css::chart2::data::XDataReceiver > xReceiver; + if( xObj.is()) + xReceiver.set( xObj->getComponent(), uno::UNO_QUERY ); + + uno::Reference<chart2::XChartDocument> xChartDoc(xReceiver, uno::UNO_QUERY); + if (xChartDoc.is()) + xChartDoc->createDefaultChart(); + + // lock the model to suppress any internal updates + uno::Reference< frame::XModel > xChartModel( xReceiver, uno::UNO_QUERY ); + if( xChartModel.is() ) + xChartModel->lockControllers(); + + // object size + awt::Size aSz = xObj->getVisualAreaSize( nAspect ); + Size aSize( aSz.Width, aSz.Height ); + + MapUnit aMapUnit = VCLUnoHelper::UnoEmbed2VCLMapUnit( xObj->getMapUnit( nAspect ) ); + + bool bSizeCh = false; + if (aSize.IsEmpty()) + { + aSize.setWidth( 5000 ); + aSize.setHeight( 5000 ); + bSizeCh = true; + } + if (bSizeCh) + { + aSize = OutputDevice::LogicToLogic( aSize, MapMode( MapUnit::Map100thMM ), MapMode( aMapUnit ) ); + aSz.Width = aSize.Width(); + aSz.Height = aSize.Height(); + xObj->setVisualAreaSize( nAspect, aSz ); + } + + ScViewData& rData = rViewSh.GetViewData(); + ScDocShell* pScDocSh = rData.GetDocShell(); + ScDocument& rScDoc = pScDocSh->GetDocument(); + bool bUndo (rScDoc.IsUndoEnabled()); + + if( pReqArgs ) + { + const SfxPoolItem* pItem; + sal_uInt16 nToTable = 0; + + if( pReqArgs->HasItem( FN_PARAM_4, &pItem ) ) + { + if ( auto pUInt16Item = dynamic_cast<const SfxUInt16Item*>( pItem) ) + nToTable = pUInt16Item->GetValue(); + else if ( auto pBoolItem = dynamic_cast<const SfxBoolItem*>( pItem) ) + { + // In IDL for Basic FN_PARAM_4 means SfxBoolItem + // -> if set new table, else current table + + if ( pBoolItem->GetValue() ) + nToTable = static_cast<sal_uInt16>(rScDoc.GetTableCount()); + else + nToTable = static_cast<sal_uInt16>(rData.GetTabNo()); + } + } + else + { + rReq.AppendItem( SfxUInt16Item( FN_PARAM_4, nToTable ) ); + } + + // Output on new table? + if ( nToTable == rScDoc.GetTableCount() ) + { + // Let's go... + OUString aTabName; + SCTAB nNewTab = rScDoc.GetTableCount(); + + rScDoc.CreateValidTabName( aTabName ); + + if ( rScDoc.InsertTab( nNewTab, aTabName ) ) + { + if (bUndo) + { + pScDocSh->GetUndoManager()->AddUndoAction( + std::make_unique<ScUndoInsertTab>( pScDocSh, nNewTab, + true/*bAppend*/, aTabName ) ); + } + + pScDocSh->Broadcast( ScTablesHint( SC_TAB_INSERTED, nNewTab ) ); + rViewSh.SetTabNo( nNewTab, true ); + pScDocSh->PostPaintExtras(); //! done afterwards ??? + } + else + { + OSL_FAIL( "Could not create new table :-/" ); + } + } + else if ( nToTable != rData.GetTabNo() ) + { + rViewSh.SetTabNo( nToTable, true ); + } + } + + lcl_ChartInit(xObj, &rData, aRangeString, bRangeIsPivotTable); // set source range, auto-detect column/row headers + + // object position + + // get chart position (from window size and data range) + Point aStart = rViewSh.GetChartInsertPos( aSize, aPositionRange ); + + tools::Rectangle aRect (aStart, aSize); + SdrOle2Obj* pObj = new SdrOle2Obj( + *pDoc, // TTTT should be reference + svt::EmbeddedObjectRef(xObj, nAspect), + aName, + aRect); + SdrPageView* pPV = pView->GetSdrPageView(); + + // #i121334# This call will change the chart's default background fill from white to transparent. + // Add here again if this is wanted (see task description for details) + // ChartHelper::AdaptDefaultsForChart( xObj ); + +// pView->InsertObjectAtView(pObj, *pPV);//this call leads to an immediate redraw and asks the chart for a visual representation + + // use the page instead of the view to insert, so no undo action is created yet + SdrPage* pPage = pPV->GetPage(); + pPage->InsertObject( pObj ); + pView->UnmarkAllObj(); + pView->MarkObj( pObj, pPV ); + + if (rReq.IsAPI()) + { + if( xChartModel.is() ) + xChartModel->unlockControllers(); + } + else if (!rViewSh.isLOKMobilePhone()) + { + //the controller will be unlocked by the dialog when the dialog is told to do so + + // only activate object if not called via API (e.g. macro) + if (!comphelper::LibreOfficeKit::isActive()) + rViewShell.ActivateObject(pObj, embed::EmbedVerbs::MS_OLEVERB_SHOW); + + //open wizard + //@todo get context from calc if that has one + uno::Reference< uno::XComponentContext > xContext( + ::cppu::defaultBootstrap_InitialComponentContext() ); + if(xContext.is()) + { + uno::Reference< lang::XMultiComponentFactory > xMCF( xContext->getServiceManager() ); + if(xMCF.is()) + { + css::uno::Reference<css::ui::dialogs::XAsynchronousExecutableDialog> xDialog( + xMCF->createInstanceWithContext( + "com.sun.star.comp.chart2.WizardDialog" + , xContext), uno::UNO_QUERY); + uno::Reference< lang::XInitialization > xInit( xDialog, uno::UNO_QUERY ); + if( xChartModel.is() && xInit.is() ) + { + uno::Sequence<uno::Any> aSeq(comphelper::InitAnyPropertySequence( + { + {"ParentWindow", uno::Any(uno::Reference< awt::XWindow >())}, + {"ChartModel", uno::Any(xChartModel)} + })); + xInit->initialize( aSeq ); + + // try to set the dialog's position so it doesn't hide the chart + uno::Reference < beans::XPropertySet > xDialogProps( xDialog, uno::UNO_QUERY ); + if ( xDialogProps.is() ) + { + try + { + //get dialog size: + awt::Size aDialogAWTSize; + if( xDialogProps->getPropertyValue("Size") + >>= aDialogAWTSize ) + { + Size aDialogSize( aDialogAWTSize.Width, aDialogAWTSize.Height ); + if ( !aDialogSize.IsEmpty() ) + { + //calculate and set new position + Point aDialogPos = rViewShell.GetChartDialogPos( aDialogSize, aRect ); + xDialogProps->setPropertyValue("Position", + uno::Any( awt::Point(aDialogPos.getX(),aDialogPos.getY()) ) ); + } + } + //tell the dialog to unlock controller + xDialogProps->setPropertyValue("UnlockControllersOnExecute", + uno::Any( true ) ); + + } + catch( uno::Exception& ) + { + OSL_FAIL( "Chart wizard couldn't be positioned automatically" ); + } + } + + pView->AddUndo(std::make_unique<SdrUndoNewObj>(*pObj)); + rtl::Reference<::svt::DialogClosedListener> pListener = new ::svt::DialogClosedListener(); + pListener->SetDialogClosedLink( rLink ); + + xDialog->startExecuteModal( pListener ); + } + else + { + uno::Reference< lang::XComponent > xComponent( xDialog, uno::UNO_QUERY ); + if( xComponent.is()) + xComponent->dispose(); + } + } + } + } +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |