diff options
Diffstat (limited to 'sc/source/ui/miscdlgs/scuiautofmt.cxx')
| -rw-r--r-- | sc/source/ui/miscdlgs/scuiautofmt.cxx | 385 |
1 files changed, 385 insertions, 0 deletions
diff --git a/sc/source/ui/miscdlgs/scuiautofmt.cxx b/sc/source/ui/miscdlgs/scuiautofmt.cxx new file mode 100644 index 000000000..ecf446081 --- /dev/null +++ b/sc/source/ui/miscdlgs/scuiautofmt.cxx @@ -0,0 +1,385 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#undef SC_DLLIMPLEMENTATION + +#include <vcl/svapp.hxx> +#include <vcl/weld.hxx> +#include <sfx2/strings.hrc> +#include <sfx2/sfxresid.hxx> +#include <o3tl/string_view.hxx> +#include <strings.hrc> +#include <global.hxx> +#include <globstr.hrc> +#include <autoform.hxx> +#include <strindlg.hxx> +#include <scuiautofmt.hxx> +#include <scresid.hxx> +#include <helpids.h> + +// AutoFormat-Dialog: + +ScAutoFormatDlg::ScAutoFormatDlg(weld::Window* pParent, + ScAutoFormat* pAutoFormat, + const ScAutoFormatData* pSelFormatData, + const ScViewData& rViewData) + : GenericDialogController(pParent, "modules/scalc/ui/autoformattable.ui", "AutoFormatTableDialog") + , aStrTitle(ScResId(STR_ADD_AUTOFORMAT_TITLE)) + , aStrLabel(ScResId(STR_ADD_AUTOFORMAT_LABEL)) + , aStrClose(ScResId(STR_BTN_AUTOFORMAT_CLOSE)) + , aStrDelMsg(ScResId(STR_DEL_AUTOFORMAT_MSG)) + , aStrRename(ScResId(STR_RENAME_AUTOFORMAT_TITLE)) + , pFormat(pAutoFormat) + , pSelFmtData(pSelFormatData) + , nIndex(0) + , bCoreDataChanged(false) + , bFmtInserted(false) + , m_xLbFormat(m_xBuilder->weld_tree_view("formatlb")) + , m_xBtnOk(m_xBuilder->weld_button("ok")) + , m_xBtnCancel(m_xBuilder->weld_button("cancel")) + , m_xBtnAdd(m_xBuilder->weld_button("add")) + , m_xBtnRemove(m_xBuilder->weld_button("remove")) + , m_xBtnRename(m_xBuilder->weld_button("rename")) + , m_xBtnNumFormat(m_xBuilder->weld_check_button("numformatcb")) + , m_xBtnBorder(m_xBuilder->weld_check_button("bordercb")) + , m_xBtnFont(m_xBuilder->weld_check_button("fontcb")) + , m_xBtnPattern(m_xBuilder->weld_check_button("patterncb")) + , m_xBtnAlignment(m_xBuilder->weld_check_button("alignmentcb")) + , m_xBtnAdjust(m_xBuilder->weld_check_button("autofitcb")) + , m_xWndPreview(new weld::CustomWeld(*m_xBuilder, "preview", m_aWndPreview)) +{ + m_aWndPreview.DetectRTL(rViewData); + + const int nWidth = m_xLbFormat->get_approximate_digit_width() * 32; + const int nHeight = m_xLbFormat->get_height_rows(8); + m_xLbFormat->set_size_request(nWidth, nHeight); + m_xWndPreview->set_size_request(nWidth, nHeight); + + Init(); + ScAutoFormat::iterator it = pFormat->begin(); + m_aWndPreview.NotifyChange(it->second.get()); +} + +ScAutoFormatDlg::~ScAutoFormatDlg() +{ +} + +void ScAutoFormatDlg::Init() +{ + m_xLbFormat->connect_changed( LINK( this, ScAutoFormatDlg, SelFmtHdl ) ); + m_xBtnNumFormat->connect_toggled( LINK( this, ScAutoFormatDlg, CheckHdl ) ); + m_xBtnBorder->connect_toggled( LINK( this, ScAutoFormatDlg, CheckHdl ) ); + m_xBtnFont->connect_toggled( LINK( this, ScAutoFormatDlg, CheckHdl ) ); + m_xBtnPattern->connect_toggled( LINK( this, ScAutoFormatDlg, CheckHdl ) ); + m_xBtnAlignment->connect_toggled( LINK( this, ScAutoFormatDlg, CheckHdl ) ); + m_xBtnAdjust->connect_toggled( LINK( this, ScAutoFormatDlg, CheckHdl ) ); + m_xBtnAdd->connect_clicked ( LINK( this, ScAutoFormatDlg, AddHdl ) ); + m_xBtnRemove->connect_clicked ( LINK( this, ScAutoFormatDlg, RemoveHdl ) ); + m_xBtnOk->connect_clicked ( LINK( this, ScAutoFormatDlg, CloseHdl ) ); + m_xBtnCancel->connect_clicked ( LINK( this, ScAutoFormatDlg, CloseHdl ) ); + m_xBtnRename->connect_clicked ( LINK( this, ScAutoFormatDlg, RenameHdl ) ); + m_xLbFormat->connect_row_activated( LINK( this, ScAutoFormatDlg, DblClkHdl ) ); + + for (const auto& rEntry : *pFormat) + m_xLbFormat->append_text(rEntry.second->GetName()); + + if (pFormat->size() == 1) + m_xBtnRemove->set_sensitive(false); + + m_xLbFormat->select(0); + m_xBtnRename->set_sensitive(false); + m_xBtnRemove->set_sensitive(false); + + nIndex = 0; + UpdateChecks(); + + if ( !pSelFmtData ) + { + m_xBtnAdd->set_sensitive(false); + m_xBtnRemove->set_sensitive(false); + bFmtInserted = true; + } +} + +void ScAutoFormatDlg::UpdateChecks() +{ + const ScAutoFormatData* pData = pFormat->findByIndex(nIndex); + + m_xBtnNumFormat->set_active( pData->GetIncludeValueFormat() ); + m_xBtnBorder->set_active( pData->GetIncludeFrame() ); + m_xBtnFont->set_active( pData->GetIncludeFont() ); + m_xBtnPattern->set_active( pData->GetIncludeBackground() ); + m_xBtnAlignment->set_active( pData->GetIncludeJustify() ); + m_xBtnAdjust->set_active( pData->GetIncludeWidthHeight() ); +} + +// Handler: + +IMPL_LINK(ScAutoFormatDlg, CloseHdl, weld::Button&, rBtn, void) +{ + if (&rBtn == m_xBtnOk.get() || &rBtn == m_xBtnCancel.get()) + { + if ( bCoreDataChanged ) + ScGlobal::GetOrCreateAutoFormat()->Save(); + + m_xDialog->response( (&rBtn == m_xBtnOk.get()) ? RET_OK : RET_CANCEL ); + } +} + +IMPL_LINK_NOARG(ScAutoFormatDlg, DblClkHdl, weld::TreeView&, bool) +{ + if ( bCoreDataChanged ) + ScGlobal::GetOrCreateAutoFormat()->Save(); + + m_xDialog->response( RET_OK ); + + return true; +} + +IMPL_LINK(ScAutoFormatDlg, CheckHdl, weld::Toggleable&, rBtn, void) +{ + ScAutoFormatData* pData = pFormat->findByIndex(nIndex); + bool bCheck = rBtn.get_active(); + + if (&rBtn == m_xBtnNumFormat.get()) + pData->SetIncludeValueFormat( bCheck ); + else if (&rBtn == m_xBtnBorder.get()) + pData->SetIncludeFrame( bCheck ); + else if (&rBtn == m_xBtnFont.get()) + pData->SetIncludeFont( bCheck ); + else if (&rBtn == m_xBtnPattern.get()) + pData->SetIncludeBackground( bCheck ); + else if (&rBtn == m_xBtnAlignment.get()) + pData->SetIncludeJustify( bCheck ); + else if (&rBtn == m_xBtnAdjust.get()) + pData->SetIncludeWidthHeight( bCheck ); + + if ( !bCoreDataChanged ) + { + m_xBtnCancel->set_label(aStrClose); + bCoreDataChanged = true; + } + + m_aWndPreview.NotifyChange( pData ); +} + +IMPL_LINK_NOARG(ScAutoFormatDlg, AddHdl, weld::Button&, void) +{ + if ( bFmtInserted || !pSelFmtData ) + return; + + OUString aStrStandard( SfxResId(STR_STANDARD) ); + OUString aFormatName; + bool bOk = false; + + while ( !bOk ) + { + ScStringInputDlg aDlg(m_xDialog.get(), aStrTitle, aStrLabel, aFormatName, + HID_SC_ADD_AUTOFMT, HID_SC_AUTOFMT_NAME); + + if (aDlg.run() == RET_OK) + { + aFormatName = aDlg.GetInputString(); + + if ( !aFormatName.isEmpty() && aFormatName != aStrStandard && pFormat->find(aFormatName) == pFormat->end() ) + { + std::unique_ptr<ScAutoFormatData> pNewData( + new ScAutoFormatData( *pSelFmtData )); + + pNewData->SetName( aFormatName ); + ScAutoFormat::iterator it = pFormat->insert(std::move(pNewData)); + bFmtInserted = it != pFormat->end(); + + if ( bFmtInserted ) + { + size_t nPos = std::distance(pFormat->begin(), it); + m_xLbFormat->insert_text(nPos, aFormatName); + m_xLbFormat->select_text( aFormatName ); + m_xBtnAdd->set_sensitive(false); + + if ( !bCoreDataChanged ) + { + m_xBtnCancel->set_label( aStrClose ); + bCoreDataChanged = true; + } + + SelFmtHdl( *m_xLbFormat ); + bOk = true; + } + } + + if ( !bFmtInserted ) + { + std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(m_xDialog.get(), + VclMessageType::Error, VclButtonsType::OkCancel, + ScResId(STR_INVALID_AFNAME))); + + sal_uInt16 nRet = xBox->run(); + + bOk = ( nRet == RET_CANCEL ); + } + } + else + bOk = true; + } +} + +IMPL_LINK_NOARG(ScAutoFormatDlg, RemoveHdl, weld::Button&, void) +{ + if ( (nIndex > 0) && (m_xLbFormat->n_children() > 0) ) + { + OUString aMsg = o3tl::getToken(aStrDelMsg, 0, '#' ) + + m_xLbFormat->get_selected_text() + + o3tl::getToken(aStrDelMsg, 1, '#' ); + + std::unique_ptr<weld::MessageDialog> xQueryBox(Application::CreateMessageDialog(m_xDialog.get(), + VclMessageType::Question, VclButtonsType::YesNo, + aMsg)); + xQueryBox->set_default_response(RET_YES); + + if (RET_YES == xQueryBox->run()) + { + m_xLbFormat->remove(nIndex); + m_xLbFormat->select(nIndex-1); + + if ( nIndex-1 == 0 ) + m_xBtnRemove->set_sensitive(false); + + if ( !bCoreDataChanged ) + { + m_xBtnCancel->set_label( aStrClose ); + bCoreDataChanged = true; + } + + ScAutoFormat::iterator it = pFormat->begin(); + std::advance(it, nIndex); + pFormat->erase(it); + nIndex--; + + SelFmtHdl( *m_xLbFormat ); + } + } + + SelFmtHdl( *m_xLbFormat ); +} + +IMPL_LINK_NOARG(ScAutoFormatDlg, RenameHdl, weld::Button&, void) +{ + bool bOk = false; + while( !bOk ) + { + + OUString aFormatName = m_xLbFormat->get_selected_text(); + OUString aEntry; + + ScStringInputDlg aDlg(m_xDialog.get(), aStrRename, aStrLabel, aFormatName, + HID_SC_REN_AFMT_DLG, HID_SC_REN_AFMT_NAME); + if (aDlg.run() == RET_OK) + { + bool bFmtRenamed = false; + aFormatName = aDlg.GetInputString(); + + if (!aFormatName.isEmpty()) + { + ScAutoFormat::iterator it = pFormat->begin(), itEnd = pFormat->end(); + for (; it != itEnd; ++it) + { + aEntry = it->second->GetName(); + if (aFormatName == aEntry) + break; + } + if (it == itEnd) + { + // no format with this name yet, so we can rename + + m_xLbFormat->remove(nIndex); + const ScAutoFormatData* p = pFormat->findByIndex(nIndex); + std::unique_ptr<ScAutoFormatData> pNewData(new ScAutoFormatData(*p)); + + it = pFormat->begin(); + std::advance(it, nIndex); + pFormat->erase(it); + + pNewData->SetName( aFormatName ); + + pFormat->insert(std::move(pNewData)); + + m_xLbFormat->freeze(); + m_xLbFormat->clear(); + for (it = pFormat->begin(); it != itEnd; ++it) + { + aEntry = it->second->GetName(); + m_xLbFormat->append_text(aEntry); + } + + m_xLbFormat->thaw(); + m_xLbFormat->select_text(aFormatName); + + if ( !bCoreDataChanged ) + { + m_xBtnCancel->set_label( aStrClose ); + bCoreDataChanged = true; + } + + SelFmtHdl( *m_xLbFormat ); + bOk = true; + bFmtRenamed = true; + } + } + if( !bFmtRenamed ) + { + std::unique_ptr<weld::MessageDialog> xBox(Application::CreateMessageDialog(m_xDialog.get(), + VclMessageType::Error, VclButtonsType::OkCancel, + ScResId(STR_INVALID_AFNAME))); + + bOk = RET_CANCEL == xBox->run(); + } + } + else + bOk = true; + } +} + +IMPL_LINK_NOARG(ScAutoFormatDlg, SelFmtHdl, weld::TreeView&, void) +{ + nIndex = m_xLbFormat->get_selected_index(); + UpdateChecks(); + + if ( nIndex == 0 ) + { + m_xBtnRename->set_sensitive(false); + m_xBtnRemove->set_sensitive(false); + } + else + { + m_xBtnRename->set_sensitive(true); + m_xBtnRemove->set_sensitive(true); + } + + ScAutoFormatData* p = pFormat->findByIndex(nIndex); + m_aWndPreview.NotifyChange(p); +} + +OUString ScAutoFormatDlg::GetCurrFormatName() +{ + const ScAutoFormatData* p = pFormat->findByIndex(nIndex); + return p ? p->GetName() : OUString(); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |