diff options
Diffstat (limited to 'sc/source/ui/unoobj/docuno.cxx')
| -rw-r--r-- | sc/source/ui/unoobj/docuno.cxx | 4866 |
1 files changed, 4866 insertions, 0 deletions
diff --git a/sc/source/ui/unoobj/docuno.cxx b/sc/source/ui/unoobj/docuno.cxx new file mode 100644 index 000000000..caae533a3 --- /dev/null +++ b/sc/source/ui/unoobj/docuno.cxx @@ -0,0 +1,4866 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */ +/* + * This file is part of the LibreOffice project. + * + * This Source Code Form is subject to the terms of the Mozilla Public + * License, v. 2.0. If a copy of the MPL was not distributed with this + * file, You can obtain one at http://mozilla.org/MPL/2.0/. + * + * This file incorporates work covered by the following license notice: + * + * Licensed to the Apache Software Foundation (ASF) under one or more + * contributor license agreements. See the NOTICE file distributed + * with this work for additional information regarding copyright + * ownership. The ASF licenses this file to you under the Apache + * License, Version 2.0 (the "License"); you may not use this file + * except in compliance with the License. You may obtain a copy of + * the License at http://www.apache.org/licenses/LICENSE-2.0 . + */ + +#include <config_feature_opencl.h> + +#include <scitems.hxx> + +#include <comphelper/propertyvalue.hxx> +#include <comphelper/sequence.hxx> +#include <editeng/brushitem.hxx> +#include <editeng/editview.hxx> +#include <editeng/memberids.h> +#include <editeng/outliner.hxx> +#include <o3tl/any.hxx> +#include <o3tl/safeint.hxx> +#include <svx/fmview.hxx> +#include <svx/svditer.hxx> +#include <svx/svdpage.hxx> +#include <svx/svxids.hrc> + +#include <LibreOfficeKit/LibreOfficeKitEnums.h> +#include <comphelper/propertysequence.hxx> +#include <officecfg/Office/Common.hxx> +#include <officecfg/Office/Calc.hxx> +#include <svl/numuno.hxx> +#include <svl/hint.hxx> +#include <unotools/moduleoptions.hxx> +#include <sfx2/bindings.hxx> +#include <sfx2/dispatch.hxx> +#include <sfx2/viewfrm.hxx> +#include <svx/unopage.hxx> +#include <vcl/pdfextoutdevdata.hxx> +#include <vcl/print.hxx> +#include <vcl/svapp.hxx> +#include <tools/json_writer.hxx> +#include <tools/multisel.hxx> +#include <tools/UnitConversion.hxx> +#include <toolkit/awt/vclxdevice.hxx> + +#include <float.h> + +#include <com/sun/star/beans/PropertyAttribute.hpp> +#include <com/sun/star/util/Date.hpp> +#include <com/sun/star/sheet/XNamedRanges.hpp> +#include <com/sun/star/sheet/XLabelRanges.hpp> +#include <com/sun/star/sheet/XSelectedSheetsSupplier.hpp> +#include <com/sun/star/sheet/XUnnamedDatabaseRanges.hpp> +#include <com/sun/star/i18n/XForbiddenCharacters.hpp> +#include <com/sun/star/script/XLibraryContainer.hpp> +#include <com/sun/star/lang/XInitialization.hpp> +#include <com/sun/star/lang/ServiceNotRegisteredException.hpp> +#include <com/sun/star/document/XDocumentEventBroadcaster.hpp> +#include <com/sun/star/script/XInvocation.hpp> +#include <com/sun/star/script/vba/XVBAEventProcessor.hpp> +#include <com/sun/star/beans/XFastPropertySet.hpp> +#include <comphelper/indexedpropertyvalues.hxx> +#include <comphelper/lok.hxx> +#include <comphelper/processfactory.hxx> +#include <comphelper/profilezone.hxx> +#include <comphelper/servicehelper.hxx> +#include <comphelper/string.hxx> +#include <cppuhelper/supportsservice.hxx> +#if HAVE_FEATURE_OPENCL +#include <opencl/platforminfo.hxx> +#endif +#include <sfx2/lokhelper.hxx> +#include <sfx2/lokcomponenthelpers.hxx> +#include <sfx2/LokControlHandler.hxx> + +#include <cellsuno.hxx> +#include <columnspanset.hxx> +#include <convuno.hxx> +#include <datauno.hxx> +#include <docfunc.hxx> +#include <docoptio.hxx> +#include <docsh.hxx> +#include <docuno.hxx> +#include <drwlayer.hxx> +#include <forbiuno.hxx> +#include <formulagroup.hxx> +#include <gridwin.hxx> +#include <hints.hxx> +#include <inputhdl.hxx> +#include <inputopt.hxx> +#include <interpre.hxx> +#include <linkuno.hxx> +#include <markdata.hxx> +#include <miscuno.hxx> +#include <nameuno.hxx> +#include <notesuno.hxx> +#include <optuno.hxx> +#include <pfuncache.hxx> +#include <postit.hxx> +#include <printfun.hxx> +#include <rangeutl.hxx> +#include <scmod.hxx> +#include <scresid.hxx> +#include <servuno.hxx> +#include <shapeuno.hxx> +#include <sheetevents.hxx> +#include <styleuno.hxx> +#include <tabvwsh.hxx> +#include <targuno.hxx> +#include <unonames.hxx> +#include <ViewSettingsSequenceDefines.hxx> +#include <editsh.hxx> +#include <drawsh.hxx> +#include <drtxtob.hxx> +#include <transobj.hxx> +#include <chgtrack.hxx> +#include <table.hxx> +#include <appoptio.hxx> +#include <formulaopt.hxx> + +#include <strings.hrc> + +using namespace com::sun::star; + +// #i111553# provides the name of the VBA constant for this document type (e.g. 'ThisExcelDoc' for Calc) +constexpr OUStringLiteral SC_UNO_VBAGLOBNAME = u"VBAGlobalConstantName"; + +// no Which-ID here, map only for PropertySetInfo + +//! rename this, those are no longer only options +static const SfxItemPropertyMapEntry* lcl_GetDocOptPropertyMap() +{ + static const SfxItemPropertyMapEntry aDocOptPropertyMap_Impl[] = + { + { SC_UNO_APPLYFMDES, 0, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_AREALINKS, 0, cppu::UnoType<sheet::XAreaLinks>::get(), 0, 0}, + { SC_UNO_AUTOCONTFOC, 0, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_BASICLIBRARIES, 0, cppu::UnoType<script::XLibraryContainer>::get(), beans::PropertyAttribute::READONLY, 0}, + { SC_UNO_DIALOGLIBRARIES, 0, cppu::UnoType<script::XLibraryContainer>::get(), beans::PropertyAttribute::READONLY, 0}, + { SC_UNO_VBAGLOBNAME, 0, cppu::UnoType<OUString>::get(), beans::PropertyAttribute::READONLY, 0}, + { SC_UNO_CALCASSHOWN, PROP_UNO_CALCASSHOWN, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNONAME_CLOCAL, 0, cppu::UnoType<lang::Locale>::get(), 0, 0}, + { SC_UNO_CJK_CLOCAL, 0, cppu::UnoType<lang::Locale>::get(), 0, 0}, + { SC_UNO_CTL_CLOCAL, 0, cppu::UnoType<lang::Locale>::get(), 0, 0}, + { SC_UNO_COLLABELRNG, 0, cppu::UnoType<sheet::XLabelRanges>::get(), 0, 0}, + { SC_UNO_DDELINKS, 0, cppu::UnoType<container::XNameAccess>::get(), 0, 0}, + { SC_UNO_DEFTABSTOP, PROP_UNO_DEFTABSTOP, cppu::UnoType<sal_Int16>::get(), 0, 0}, + { SC_UNO_EXTERNALDOCLINKS, 0, cppu::UnoType<sheet::XExternalDocLinks>::get(), 0, 0}, + { SC_UNO_FORBIDDEN, 0, cppu::UnoType<i18n::XForbiddenCharacters>::get(), beans::PropertyAttribute::READONLY, 0}, + { SC_UNO_HASDRAWPAGES, 0, cppu::UnoType<bool>::get(), beans::PropertyAttribute::READONLY, 0}, + { SC_UNO_IGNORECASE, PROP_UNO_IGNORECASE, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_ITERENABLED, PROP_UNO_ITERENABLED, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_ITERCOUNT, PROP_UNO_ITERCOUNT, cppu::UnoType<sal_Int32>::get(), 0, 0}, + { SC_UNO_ITEREPSILON, PROP_UNO_ITEREPSILON, cppu::UnoType<double>::get(), 0, 0}, + { SC_UNO_LOOKUPLABELS, PROP_UNO_LOOKUPLABELS, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_MATCHWHOLE, PROP_UNO_MATCHWHOLE, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_NAMEDRANGES, 0, cppu::UnoType<sheet::XNamedRanges>::get(), 0, 0}, + { SC_UNO_DATABASERNG, 0, cppu::UnoType<sheet::XDatabaseRanges>::get(), 0, 0}, + { SC_UNO_NULLDATE, PROP_UNO_NULLDATE, cppu::UnoType<util::Date>::get(), 0, 0}, + { SC_UNO_ROWLABELRNG, 0, cppu::UnoType<sheet::XLabelRanges>::get(), 0, 0}, + { SC_UNO_SHEETLINKS, 0, cppu::UnoType<container::XNameAccess>::get(), 0, 0}, + { SC_UNO_SPELLONLINE, PROP_UNO_SPELLONLINE, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_STANDARDDEC, PROP_UNO_STANDARDDEC, cppu::UnoType<sal_Int16>::get(), 0, 0}, + { SC_UNO_REGEXENABLED, PROP_UNO_REGEXENABLED, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_WILDCARDSENABLED, PROP_UNO_WILDCARDSENABLED, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_RUNTIMEUID, 0, cppu::UnoType<OUString>::get(), beans::PropertyAttribute::READONLY, 0}, + { SC_UNO_HASVALIDSIGNATURES, 0, cppu::UnoType<bool>::get(), beans::PropertyAttribute::READONLY, 0}, + { SC_UNO_ISLOADED, 0, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_ISUNDOENABLED, 0, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_RECORDCHANGES, 0, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_ISRECORDCHANGESPROTECTED,0, cppu::UnoType<bool>::get(), beans::PropertyAttribute::READONLY, 0}, + { SC_UNO_ISADJUSTHEIGHTENABLED, 0, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_ISEXECUTELINKENABLED, 0, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_ISCHANGEREADONLYENABLED, 0, cppu::UnoType<bool>::get(), 0, 0}, + { SC_UNO_REFERENCEDEVICE, 0, cppu::UnoType<awt::XDevice>::get(), beans::PropertyAttribute::READONLY, 0}, + {u"BuildId", 0, ::cppu::UnoType<OUString>::get(), 0, 0}, + { SC_UNO_CODENAME, 0, cppu::UnoType<OUString>::get(), 0, 0}, + { SC_UNO_INTEROPGRABBAG, 0, cppu::UnoType<uno::Sequence< beans::PropertyValue >>::get(), 0, 0}, + { u"", 0, css::uno::Type(), 0, 0 } + }; + return aDocOptPropertyMap_Impl; +} + +//! StandardDecimals as property and from NumberFormatter ???????? + +static const SfxItemPropertyMapEntry* lcl_GetColumnsPropertyMap() +{ + static const SfxItemPropertyMapEntry aColumnsPropertyMap_Impl[] = + { + { SC_UNONAME_MANPAGE, 0, cppu::UnoType<bool>::get(), 0, 0 }, + { SC_UNONAME_NEWPAGE, 0, cppu::UnoType<bool>::get(), 0, 0 }, + { SC_UNONAME_CELLVIS, 0, cppu::UnoType<bool>::get(), 0, 0 }, + { SC_UNONAME_OWIDTH, 0, cppu::UnoType<bool>::get(), 0, 0 }, + { SC_UNONAME_CELLWID, 0, cppu::UnoType<sal_Int32>::get(), 0, 0 }, + { u"", 0, css::uno::Type(), 0, 0 } + }; + return aColumnsPropertyMap_Impl; +} + +static const SfxItemPropertyMapEntry* lcl_GetRowsPropertyMap() +{ + static const SfxItemPropertyMapEntry aRowsPropertyMap_Impl[] = + { + { SC_UNONAME_CELLHGT, 0, cppu::UnoType<sal_Int32>::get(), 0, 0 }, + { SC_UNONAME_CELLFILT, 0, cppu::UnoType<bool>::get(), 0, 0 }, + { SC_UNONAME_OHEIGHT, 0, cppu::UnoType<bool>::get(), 0, 0 }, + { SC_UNONAME_MANPAGE, 0, cppu::UnoType<bool>::get(), 0, 0 }, + { SC_UNONAME_NEWPAGE, 0, cppu::UnoType<bool>::get(), 0, 0 }, + { SC_UNONAME_CELLVIS, 0, cppu::UnoType<bool>::get(), 0, 0 }, + { SC_UNONAME_CELLBACK, ATTR_BACKGROUND, ::cppu::UnoType<sal_Int32>::get(), 0, MID_BACK_COLOR }, + { SC_UNONAME_CELLTRAN, ATTR_BACKGROUND, cppu::UnoType<bool>::get(), 0, MID_GRAPHIC_TRANSPARENT }, + // not sorted, not used with SfxItemPropertyMapEntry::GetByName + { u"", 0, css::uno::Type(), 0, 0 } + }; + return aRowsPropertyMap_Impl; +} + +constexpr OUStringLiteral SCMODELOBJ_SERVICE = u"com.sun.star.sheet.SpreadsheetDocument"; +constexpr OUStringLiteral SCDOCSETTINGS_SERVICE = u"com.sun.star.sheet.SpreadsheetDocumentSettings"; +constexpr OUStringLiteral SCDOC_SERVICE = u"com.sun.star.document.OfficeDocument"; + +SC_SIMPLE_SERVICE_INFO( ScAnnotationsObj, "ScAnnotationsObj", "com.sun.star.sheet.CellAnnotations" ) +SC_SIMPLE_SERVICE_INFO( ScDrawPagesObj, "ScDrawPagesObj", "com.sun.star.drawing.DrawPages" ) +SC_SIMPLE_SERVICE_INFO( ScScenariosObj, "ScScenariosObj", "com.sun.star.sheet.Scenarios" ) +SC_SIMPLE_SERVICE_INFO( ScSpreadsheetSettingsObj, "ScSpreadsheetSettingsObj", "com.sun.star.sheet.SpreadsheetDocumentSettings" ) +SC_SIMPLE_SERVICE_INFO( ScTableColumnsObj, "ScTableColumnsObj", "com.sun.star.table.TableColumns" ) +SC_SIMPLE_SERVICE_INFO( ScTableRowsObj, "ScTableRowsObj", "com.sun.star.table.TableRows" ) +SC_SIMPLE_SERVICE_INFO( ScTableSheetsObj, "ScTableSheetsObj", "com.sun.star.sheet.Spreadsheets" ) + +class ScPrintUIOptions : public vcl::PrinterOptionsHelper +{ +public: + ScPrintUIOptions(); + void SetDefaults(); +}; + +ScPrintUIOptions::ScPrintUIOptions() +{ + const ScPrintOptions& rPrintOpt = SC_MOD()->GetPrintOptions(); + sal_Int32 nContent = rPrintOpt.GetAllSheets() ? 0 : 1; + bool bSuppress = rPrintOpt.GetSkipEmpty(); + + sal_Int32 nNumProps= 10, nIdx = 0; + + m_aUIProperties.resize(nNumProps); + + // load the writer PrinterOptions into the custom tab + m_aUIProperties[nIdx].Name = "OptionsUIFile"; + m_aUIProperties[nIdx++].Value <<= OUString("modules/scalc/ui/printeroptions.ui"); + + // create Section for spreadsheet (results in an extra tab page in dialog) + SvtModuleOptions aOpt; + OUString aAppGroupname( ScResId( SCSTR_PRINTOPT_PRODNAME ) ); + aAppGroupname = aAppGroupname.replaceFirst( "%s", aOpt.GetModuleName( SvtModuleOptions::EModule::CALC ) ); + m_aUIProperties[nIdx++].Value = setGroupControlOpt("tabcontrol-page2", aAppGroupname, OUString()); + + // show subgroup for pages + m_aUIProperties[nIdx++].Value = setSubgroupControlOpt("pages", ScResId( SCSTR_PRINTOPT_PAGES ), OUString()); + + // create a bool option for empty pages + m_aUIProperties[nIdx++].Value = setBoolControlOpt("suppressemptypages", ScResId( SCSTR_PRINTOPT_SUPPRESSEMPTY ), + ".HelpID:vcl:PrintDialog:IsSuppressEmptyPages:CheckBox", + "IsSuppressEmptyPages", + bSuppress); + // show Subgroup for print content + vcl::PrinterOptionsHelper::UIControlOptions aPrintRangeOpt; + aPrintRangeOpt.maGroupHint = "PrintRange"; + m_aUIProperties[nIdx++].Value = setSubgroupControlOpt("printrange", ScResId( SCSTR_PRINTOPT_PAGES ), + OUString(), + aPrintRangeOpt); + + // create a choice for the content to create + uno::Sequence< OUString > aChoices{ + ScResId( SCSTR_PRINTOPT_ALLSHEETS ), + ScResId( SCSTR_PRINTOPT_SELECTEDSHEETS ), + ScResId( SCSTR_PRINTOPT_SELECTEDCELLS )}; + uno::Sequence< OUString > aHelpIds{ + ".HelpID:vcl:PrintDialog:PrintContent:ListBox"}; + m_aUIProperties[nIdx++].Value = setChoiceListControlOpt( "printextrabox", OUString(), + aHelpIds, "PrintContent", + aChoices, nContent ); + + // show Subgroup for print range + aPrintRangeOpt.mbInternalOnly = true; + m_aUIProperties[nIdx++].Value = setSubgroupControlOpt("fromwhich", ScResId( SCSTR_PRINTOPT_FROMWHICH ), + OUString(), + aPrintRangeOpt); + + // create a choice for the range to print + OUString aPrintRangeName( "PrintRange" ); + aChoices = { ScResId( SCSTR_PRINTOPT_PRINTALLPAGES ), ScResId( SCSTR_PRINTOPT_PRINTPAGES ) }; + aHelpIds = { ".HelpID:vcl:PrintDialog:PrintRange:RadioButton:0", + ".HelpID:vcl:PrintDialog:PrintRange:RadioButton:1" }; + uno::Sequence< OUString > aWidgetIds{ "rbAllPages", "rbRangePages" }; + m_aUIProperties[nIdx++].Value = setChoiceRadiosControlOpt(aWidgetIds, OUString(), + aHelpIds, + aPrintRangeName, + aChoices, + 0 ); + + // create an Edit dependent on "Pages" selected + vcl::PrinterOptionsHelper::UIControlOptions aPageRangeOpt( aPrintRangeName, 1, true ); + m_aUIProperties[nIdx++].Value = setEditControlOpt("pagerange", OUString(), + ".HelpID:vcl:PrintDialog:PageRange:Edit", + "PageRange", OUString(), aPageRangeOpt); + + vcl::PrinterOptionsHelper::UIControlOptions aEvenOddOpt(aPrintRangeName, 0, true); + m_aUIProperties[ nIdx++ ].Value = setChoiceListControlOpt("evenoddbox", + OUString(), + uno::Sequence<OUString>(), + "EvenOdd", + uno::Sequence<OUString>(), + 0, + uno::Sequence< sal_Bool >(), + aEvenOddOpt); + + assert(nIdx == nNumProps); +} + +void ScPrintUIOptions::SetDefaults() +{ + // re-initialize the default values from print options + + const ScPrintOptions& rPrintOpt = SC_MOD()->GetPrintOptions(); + sal_Int32 nContent = rPrintOpt.GetAllSheets() ? 0 : 1; + bool bSuppress = rPrintOpt.GetSkipEmpty(); + + for (beans::PropertyValue & rPropValue : m_aUIProperties) + { + uno::Sequence<beans::PropertyValue> aUIProp; + if ( rPropValue.Value >>= aUIProp ) + { + for (auto& rProp : asNonConstRange(aUIProp)) + { + OUString aName = rProp.Name; + if ( aName == "Property" ) + { + beans::PropertyValue aPropertyValue; + if ( rProp.Value >>= aPropertyValue ) + { + if ( aPropertyValue.Name == "PrintContent" ) + { + aPropertyValue.Value <<= nContent; + rProp.Value <<= aPropertyValue; + } + else if ( aPropertyValue.Name == "IsSuppressEmptyPages" ) + { + aPropertyValue.Value <<= bSuppress; + rProp.Value <<= aPropertyValue; + } + } + } + } + rPropValue.Value <<= aUIProp; + } + } +} + +void ScModelObj::CreateAndSet(ScDocShell* pDocSh) +{ + if (pDocSh) + pDocSh->SetBaseModel( new ScModelObj(pDocSh) ); +} + +SdrModel& ScModelObj::getSdrModelFromUnoModel() const +{ + ScDocument& rDoc(pDocShell->GetDocument()); + + if(!rDoc.GetDrawLayer()) + { + rDoc.InitDrawLayer(); + } + + return *rDoc.GetDrawLayer(); // TTTT should be reference +} + +ScModelObj::ScModelObj( ScDocShell* pDocSh ) : + SfxBaseModel( pDocSh ), + aPropSet( lcl_GetDocOptPropertyMap() ), + pDocShell( pDocSh ), + maChangesListeners( m_aMutex ) +{ + // pDocShell may be NULL if this is the base of a ScDocOptionsObj + if ( pDocShell ) + { + pDocShell->GetDocument().AddUnoObject(*this); // SfxModel is derived from SfxListener + } +} + +ScModelObj::~ScModelObj() +{ + SolarMutexGuard g; + + if (pDocShell) + pDocShell->GetDocument().RemoveUnoObject(*this); + + if (xNumberAgg.is()) + xNumberAgg->setDelegator(uno::Reference<uno::XInterface>()); + + pPrintFuncCache.reset(); + pPrinterOptions.reset(); +} + +uno::Reference< uno::XAggregation> const & ScModelObj::GetFormatter() +{ + // pDocShell may be NULL if this is the base of a ScDocOptionsObj + if ( !xNumberAgg.is() && pDocShell ) + { + // setDelegator changes RefCount, so we'd better hold the reference ourselves + // (directly in m_refCount, so we don't delete ourselves with release()) + osl_atomic_increment( &m_refCount ); + // we need a reference to SvNumberFormatsSupplierObj during queryInterface, + // otherwise it'll be deleted + uno::Reference<util::XNumberFormatsSupplier> xFormatter( + new SvNumberFormatsSupplierObj(pDocShell->GetDocument().GetThreadedContext().GetFormatTable() )); + { + xNumberAgg.set(uno::Reference<uno::XAggregation>( xFormatter, uno::UNO_QUERY )); + // extra block to force deletion of the temporary before setDelegator + } + + // during setDelegator no additional reference should exist + xFormatter = nullptr; + + if (xNumberAgg.is()) + xNumberAgg->setDelegator( static_cast<cppu::OWeakObject*>(this) ); + osl_atomic_decrement( &m_refCount ); + } // if ( !xNumberAgg.is() ) + return xNumberAgg; +} + +ScDocument* ScModelObj::GetDocument() const +{ + if (pDocShell) + return &pDocShell->GetDocument(); + return nullptr; +} + +SfxObjectShell* ScModelObj::GetEmbeddedObject() const +{ + return pDocShell; +} + +void ScModelObj::UpdateAllRowHeights() +{ + if (pDocShell) + pDocShell->UpdateAllRowHeights(); +} + +void ScModelObj::BeforeXMLLoading() +{ + if (pDocShell) + pDocShell->BeforeXMLLoading(); +} + +void ScModelObj::AfterXMLLoading() +{ + if (pDocShell) + pDocShell->AfterXMLLoading(true); +} + +ScSheetSaveData* ScModelObj::GetSheetSaveData() +{ + if (pDocShell) + return pDocShell->GetSheetSaveData(); + return nullptr; +} + +ScFormatSaveData* ScModelObj::GetFormatSaveData() +{ + if (pDocShell) + return pDocShell->GetFormatSaveData(); + return nullptr; +} + +void ScModelObj::RepaintRange( const ScRange& rRange ) +{ + if (pDocShell) + pDocShell->PostPaint( rRange, PaintPartFlags::Grid ); +} + +void ScModelObj::RepaintRange( const ScRangeList& rRange ) +{ + if (pDocShell) + pDocShell->PostPaint( rRange, PaintPartFlags::Grid ); +} + +static ScViewData* lcl_getViewMatchingDocZoomTab(const Fraction& rZoomX, + const Fraction& rZoomY, + const SCTAB nTab, + const ViewShellDocId& rDocId) +{ + constexpr size_t nMaxIter = 5; + size_t nIter = 0; + for (SfxViewShell* pViewShell = SfxViewShell::GetFirst(); + pViewShell && nIter < nMaxIter; + (pViewShell = SfxViewShell::GetNext(*pViewShell)), ++nIter) + { + if (pViewShell->GetDocId() != rDocId) + continue; + + ScTabViewShell* pTabViewShell = dynamic_cast<ScTabViewShell*>(pViewShell); + if (!pTabViewShell) + continue; + + ScViewData& rData = pTabViewShell->GetViewData(); + if (rData.GetTabNo() == nTab && rData.GetZoomX() == rZoomX && rData.GetZoomY() == rZoomY) + return &rData; + } + + return nullptr; +} + +void ScModelObj::paintTile( VirtualDevice& rDevice, + int nOutputWidth, int nOutputHeight, + int nTilePosX, int nTilePosY, + tools::Long nTileWidth, tools::Long nTileHeight ) +{ + ScTabViewShell* pViewShell = pDocShell->GetBestViewShell(false); + + // FIXME: Can this happen? What should we do? + if (!pViewShell) + return; + + ScViewData* pActiveViewData = &pViewShell->GetViewData(); + Fraction aFracX(o3tl::toTwips(nOutputWidth, o3tl::Length::px), nTileWidth); + Fraction aFracY(o3tl::toTwips(nOutputHeight, o3tl::Length::px), nTileHeight); + + // Try to find a view that matches the tile-zoom requested by iterating over + // first few shells. This is to avoid switching of zooms in ScGridWindow::PaintTile + // and hence avoid grid-offset recomputation on all shapes which is not cheap. + ScViewData* pViewData = lcl_getViewMatchingDocZoomTab(aFracX, aFracY, + pActiveViewData->GetTabNo(), pViewShell->GetDocId()); + if (!pViewData) + pViewData = pActiveViewData; + + ScGridWindow* pGridWindow = pViewData->GetActiveWin(); + + // update the size of the area we are painting + // FIXME we want to use only the minimal necessary size, like the + // following; but for the moment there is too many problems with that and + // interaction with editeng used for the cell editing + //Size aTileSize(nOutputWidth, nOutputHeight); + //if (pGridWindow->GetOutputSizePixel() != aTileSize) + // pGridWindow->SetOutputSizePixel(Size(nOutputWidth, nOutputHeight)); + // so instead for now, set the viewport size to document size + Size aDocSize = getDocumentSize(); + pGridWindow->SetOutputSizePixel(Size(aDocSize.Width() * pViewData->GetPPTX(), aDocSize.Height() * pViewData->GetPPTY())); + + pGridWindow->PaintTile( rDevice, nOutputWidth, nOutputHeight, + nTilePosX, nTilePosY, nTileWidth, nTileHeight ); + + // Draw Form controls + ScDrawLayer* pDrawLayer = pDocShell->GetDocument().GetDrawLayer(); + SdrPage* pPage = pDrawLayer->GetPage(sal_uInt16(pViewData->GetTabNo())); + SdrView* pDrawView = pViewData->GetViewShell()->GetScDrawView(); + tools::Rectangle aTileRect(Point(nTilePosX, nTilePosY), Size(nTileWidth, nTileHeight)); + Size aOutputSize(nOutputWidth, nOutputHeight); + LokControlHandler::paintControlTile(pPage, pDrawView, *pGridWindow, rDevice, aOutputSize, aTileRect); +} + +void ScModelObj::setPart( int nPart, bool /*bAllowChangeFocus*/ ) +{ + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return; + + ScTabView* pTabView = pViewData->GetView(); + if (!pTabView) + return; + + if (SdrView* pDrawView = pViewData->GetViewShell()->GetScDrawView()) + pDrawView->SetNegativeX(comphelper::LibreOfficeKit::isActive() && + pViewData->GetDocument().IsLayoutRTL(nPart)); + + pTabView->SelectTabPage(nPart + 1); +} + +int ScModelObj::getParts() +{ + ScDocument& rDoc = pDocShell->GetDocument(); + return rDoc.GetTableCount(); +} + +int ScModelObj::getPart() +{ + ScViewData* pViewData = ScDocShell::GetViewData(); + return pViewData ? pViewData->GetViewShell()->getPart() : 0; +} + +OUString ScModelObj::getPartInfo( int nPart ) +{ + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return OUString(); + + const bool bIsVisible = pViewData->GetDocument().IsVisible(nPart); + //FIXME: Implement IsSelected(). + const bool bIsSelected = false; //pViewData->GetDocument()->IsSelected(nPart); + const bool bIsRTLLayout = pViewData->GetDocument().IsLayoutRTL(nPart); + + OUString aPartInfo = "{ \"visible\": \"" + + OUString::number(static_cast<unsigned int>(bIsVisible)) + + "\", \"selected\": \"" + + OUString::number(static_cast<unsigned int>(bIsSelected)) + + "\", \"rtllayout\": \"" + + OUString::number(static_cast<unsigned int>(bIsRTLLayout)) + + "\" }"; + return aPartInfo; +} + +OUString ScModelObj::getPartName( int nPart ) +{ + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return OUString(); + + OUString sTabName; + pViewData->GetDocument().GetName(nPart, sTabName); + return sTabName; +} + +OUString ScModelObj::getPartHash( int nPart ) +{ + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return OUString(); + + sal_Int64 nHashCode; + return (pViewData->GetDocument().GetHashCode(nPart, nHashCode) ? OUString::number(nHashCode) : OUString()); +} + +VclPtr<vcl::Window> ScModelObj::getDocWindow() +{ + SolarMutexGuard aGuard; + + ScTabViewShell* pViewShell = pDocShell->GetBestViewShell(false); + + // FIXME: Can this happen? What should we do? + if (!pViewShell) + return VclPtr<vcl::Window>(); + + ScViewData* pViewData = &pViewShell->GetViewData(); + + VclPtr<vcl::Window> pWindow; + if (pViewData) + { + pWindow = pViewData->GetActiveWin(); + + LokChartHelper aChartHelper(pViewData->GetViewShell()); + vcl::Window* pChartWindow = aChartHelper.GetWindow(); + if (pChartWindow) + pWindow = pChartWindow; + } + + return pWindow; +} + +Size ScModelObj::getDocumentSize() +{ + Size aSize(10, 10); // minimum size + + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return aSize; + + SCTAB nTab = pViewData->GetTabNo(); + SCCOL nEndCol = 0; + SCROW nEndRow = 0; + const ScDocument& rDoc = pDocShell->GetDocument(); + + rDoc.GetTiledRenderingArea(nTab, nEndCol, nEndRow); + + const ScDocument* pThisDoc = &rDoc; + const double fPPTX = pViewData->GetPPTX(); + const double fPPTY = pViewData->GetPPTY(); + + auto GetColWidthPx = [pThisDoc, fPPTX, nTab](SCCOL nCol) { + const sal_uInt16 nSize = pThisDoc->GetColWidth(nCol, nTab); + return ScViewData::ToPixel(nSize, fPPTX); + }; + + tools::Long nDocWidthPixel = pViewData->GetLOKWidthHelper().computePosition(nEndCol, GetColWidthPx); + tools::Long nDocHeightPixel = pThisDoc->GetScaledRowHeight(0, nEndRow, nTab, fPPTY); + + if (nDocWidthPixel > 0 && nDocHeightPixel > 0) + { + // convert to twips + aSize.setWidth(nDocWidthPixel / fPPTX); + aSize.setHeight(nDocHeightPixel / fPPTY); + } + else + { + // convert to twips + aSize.setWidth(rDoc.GetColWidth(0, nEndCol, nTab)); + aSize.setHeight(rDoc.GetRowHeight(0, nEndRow, nTab)); + } + + return aSize; +} + + +void ScModelObj::postKeyEvent(int nType, int nCharCode, int nKeyCode) +{ + SolarMutexGuard aGuard; + SfxLokHelper::postKeyEventAsync(getDocWindow(), nType, nCharCode, nKeyCode); +} + +void ScModelObj::postMouseEvent(int nType, int nX, int nY, int nCount, int nButtons, int nModifier) +{ + SolarMutexGuard aGuard; + + ScTabViewShell* pViewShell = pDocShell->GetBestViewShell(false); + + // FIXME: Can this happen? What should we do? + if (!pViewShell) + return; + + ScViewData* pViewData = &pViewShell->GetViewData(); + + ScGridWindow* pGridWindow = pViewData->GetActiveWin(); + + if (!pGridWindow) + return; + + // check if user hit a chart which is being edited by him + ScTabViewShell * pTabViewShell = pViewData->GetViewShell(); + SCTAB nTab = pViewData->GetTabNo(); + const ScDocument& rDoc = pDocShell->GetDocument(); + // In LOK RTL mode draw/svx operates in negative X coordinates + // But the coordinates from client is always positive, so negate nX for draw. + bool bDrawNegativeX = rDoc.IsNegativePage(nTab); + LokChartHelper aChartHelper(pTabViewShell, bDrawNegativeX); + int nDrawX = bDrawNegativeX ? -nX : nX; + if (aChartHelper.postMouseEvent(nType, nDrawX, nY, + nCount, nButtons, nModifier, + pViewData->GetPPTX(), pViewData->GetPPTY())) + { + return; + } + + Point aPointTwip(nX, nY); + Point aPointTwipDraw(nDrawX, nY); + + // check if the user hit a chart which is being edited by someone else + // and, if so, skip current mouse event + if (nType != LOK_MOUSEEVENT_MOUSEMOVE) + { + if (LokChartHelper::HitAny(aPointTwipDraw, bDrawNegativeX)) + return; + } + + // Check if a control is hit + Point aPointHMM = o3tl::convert(aPointTwip, o3tl::Length::twip, o3tl::Length::mm100); + Point aPointHMMDraw(bDrawNegativeX ? -aPointHMM.X() : aPointHMM.X(), aPointHMM.Y()); + ScDrawLayer* pDrawLayer = pDocShell->GetDocument().GetDrawLayer(); + SdrPage* pPage = pDrawLayer->GetPage(sal_uInt16(nTab)); + SdrView* pDrawView = pViewData->GetViewShell()->GetScDrawView(); + if (LokControlHandler::postMouseEvent(pPage, pDrawView, *pGridWindow, nType, aPointHMMDraw, nCount, nButtons, nModifier)) + return; + + if (!pGridWindow->HasChildPathFocus(true)) + pGridWindow->GrabFocus(); + + // Calc operates in pixels... + const Point aPosition(nX * pViewData->GetPPTX() + pGridWindow->GetOutOffXPixel(), + nY * pViewData->GetPPTY() + pGridWindow->GetOutOffYPixel()); + + VclEventId aEvent = VclEventId::NONE; + MouseEvent aData(aPosition, nCount, MouseEventModifiers::SIMPLECLICK, nButtons, nModifier); + aData.setLogicPosition(aPointHMM); + switch (nType) + { + case LOK_MOUSEEVENT_MOUSEBUTTONDOWN: + aEvent = VclEventId::WindowMouseButtonDown; + break; + case LOK_MOUSEEVENT_MOUSEBUTTONUP: + aEvent = VclEventId::WindowMouseButtonUp; + break; + case LOK_MOUSEEVENT_MOUSEMOVE: + aEvent = VclEventId::WindowMouseMove; + break; + default: + break; + } + + Application::LOKHandleMouseEvent(aEvent, pGridWindow, &aData); +} + +void ScModelObj::setTextSelection(int nType, int nX, int nY) +{ + SolarMutexGuard aGuard; + + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return; + + ScTabViewShell* pViewShell = pViewData->GetViewShell(); + + LokChartHelper aChartHelper(pViewShell); + if (aChartHelper.setTextSelection(nType, nX, nY)) + return; + + ScInputHandler* pInputHandler = SC_MOD()->GetInputHdl(pViewShell); + ScDrawView* pDrawView = pViewData->GetScDrawView(); + + bool bHandled = false; + + if (pInputHandler && pInputHandler->IsInputMode()) + { + // forwarding to editeng - we are editing the cell content + EditView* pTableView = pInputHandler->GetTableView(); + assert(pTableView); + + Point aPoint(convertTwipToMm100(nX), convertTwipToMm100(nY)); + + if (pTableView->GetOutputArea().Contains(aPoint)) + { + switch (nType) + { + case LOK_SETTEXTSELECTION_START: + pTableView->SetCursorLogicPosition(aPoint, /*bPoint=*/false, /*bClearMark=*/false); + break; + case LOK_SETTEXTSELECTION_END: + pTableView->SetCursorLogicPosition(aPoint, /*bPoint=*/true, /*bClearMark=*/false); + break; + case LOK_SETTEXTSELECTION_RESET: + pTableView->SetCursorLogicPosition(aPoint, /*bPoint=*/true, /*bClearMark=*/true); + break; + default: + assert(false); + break; + } + bHandled = true; + } + } + else if (pDrawView && pDrawView->IsTextEdit()) + { + // forwarding to editeng - we are editing the text in shape + OutlinerView* pOutlinerView = pDrawView->GetTextEditOutlinerView(); + EditView& rEditView = pOutlinerView->GetEditView(); + + Point aPoint(convertTwipToMm100(nX), convertTwipToMm100(nY)); + switch (nType) + { + case LOK_SETTEXTSELECTION_START: + rEditView.SetCursorLogicPosition(aPoint, /*bPoint=*/false, /*bClearMark=*/false); + break; + case LOK_SETTEXTSELECTION_END: + rEditView.SetCursorLogicPosition(aPoint, /*bPoint=*/true, /*bClearMark=*/false); + break; + case LOK_SETTEXTSELECTION_RESET: + rEditView.SetCursorLogicPosition(aPoint, /*bPoint=*/true, /*bClearMark=*/true); + break; + default: + assert(false); + break; + } + bHandled = true; + } + + if (!bHandled) + { + // just update the cell selection + ScGridWindow* pGridWindow = pViewData->GetActiveWin(); + if (!pGridWindow) + return; + + // move the cell selection handles + pGridWindow->SetCellSelectionPixel(nType, nX * pViewData->GetPPTX(), nY * pViewData->GetPPTY()); + } +} + +uno::Reference<datatransfer::XTransferable> ScModelObj::getSelection() +{ + SolarMutexGuard aGuard; + + TransferableDataHelper aDataHelper; + uno::Reference<datatransfer::XTransferable> xTransferable; + + if (ScViewData* pViewData = ScDocShell::GetViewData()) + { + if ( ScEditShell * pShell = dynamic_cast<ScEditShell*>( pViewData->GetViewShell()->GetViewFrame()->GetDispatcher()->GetShell(0) ) ) + xTransferable = pShell->GetEditView()->GetTransferable(); + else if ( nullptr != dynamic_cast<ScDrawTextObjectBar*>( pViewData->GetViewShell()->GetViewFrame()->GetDispatcher()->GetShell(0) )) + { + ScDrawView* pView = pViewData->GetScDrawView(); + OutlinerView* pOutView = pView->GetTextEditOutlinerView(); + if (pOutView) + xTransferable = pOutView->GetEditView().GetTransferable(); + } + else if ( ScDrawShell * pDrawShell = dynamic_cast<ScDrawShell*>( pViewData->GetViewShell()->GetViewFrame()->GetDispatcher()->GetShell(0) ) ) + xTransferable = pDrawShell->GetDrawView()->CopyToTransferable(); + else + xTransferable = pViewData->GetViewShell()->CopyToTransferable(); + } + + if (!xTransferable.is()) + xTransferable.set( aDataHelper.GetTransferable() ); + + return xTransferable; +} + +void ScModelObj::setGraphicSelection(int nType, int nX, int nY) +{ + SolarMutexGuard aGuard; + + ScTabViewShell* pViewShell = pDocShell->GetBestViewShell(false); + + // FIXME: Can this happen? What should we do? + if (!pViewShell) + return; + + ScViewData* pViewData = &pViewShell->GetViewData(); + + ScGridWindow* pGridWindow = pViewData->GetActiveWin(); + + double fPPTX = pViewData->GetPPTX(); + double fPPTY = pViewData->GetPPTY(); + + pViewShell = pViewData->GetViewShell(); + LokChartHelper aChartHelper(pViewShell); + if (aChartHelper.setGraphicSelection(nType, nX, nY, fPPTX, fPPTY)) + return; + + int nPixelX = nX * fPPTX; + int nPixelY = nY * fPPTY; + + switch (nType) + { + case LOK_SETGRAPHICSELECTION_START: + { + MouseEvent aClickEvent(Point(nPixelX, nPixelY), 1, MouseEventModifiers::SIMPLECLICK, MOUSE_LEFT); + pGridWindow->MouseButtonDown(aClickEvent); + MouseEvent aMoveEvent(Point(nPixelX, nPixelY), 0, MouseEventModifiers::SIMPLEMOVE, MOUSE_LEFT); + pGridWindow->MouseMove(aMoveEvent); + } + break; + case LOK_SETGRAPHICSELECTION_END: + { + MouseEvent aMoveEvent(Point(nPixelX, nPixelY), 0, MouseEventModifiers::SIMPLEMOVE, MOUSE_LEFT); + pGridWindow->MouseMove(aMoveEvent); + MouseEvent aClickEvent(Point(nPixelX, nPixelY), 1, MouseEventModifiers::SIMPLECLICK, MOUSE_LEFT); + pGridWindow->MouseButtonUp(aClickEvent); + } + break; + default: + assert(false); + break; + } +} + +void ScModelObj::resetSelection() +{ + SolarMutexGuard aGuard; + + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return; + + ScTabViewShell* pViewShell = pViewData->GetViewShell(); + + // deselect the shapes & texts + ScDrawView* pDrawView = pViewShell->GetScDrawView(); + if (pDrawView) + { + pDrawView->ScEndTextEdit(); + pDrawView->UnmarkAll(); + } + else + pViewShell->Unmark(); + + // and hide the cell and text selection + pViewShell->libreOfficeKitViewCallback(LOK_CALLBACK_TEXT_SELECTION, ""); + SfxLokHelper::notifyOtherViews(pViewShell, LOK_CALLBACK_TEXT_VIEW_SELECTION, "selection", ""); +} + +void ScModelObj::setClipboard(const uno::Reference<datatransfer::clipboard::XClipboard>& xClipboard) +{ + SolarMutexGuard aGuard; + + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return; + + pViewData->GetActiveWin()->SetClipboard(xClipboard); +} + +bool ScModelObj::isMimeTypeSupported() +{ + SolarMutexGuard aGuard; + + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return false; + + + TransferableDataHelper aDataHelper(TransferableDataHelper::CreateFromSystemClipboard(pViewData->GetActiveWin())); + return EditEngine::HasValidData(aDataHelper.GetTransferable()); +} + +static void lcl_sendLOKDocumentBackground(const ScViewData* pViewData) +{ + ScDocShell* pDocSh = pViewData->GetDocShell(); + ScDocument& rDoc = pDocSh->GetDocument(); + const ScPatternAttr *pAttr = rDoc.GetDefPattern(); + const SfxPoolItem& rItem = pAttr->GetItem(ATTR_BACKGROUND); + const SvxBrushItem& rBackground = static_cast<const SvxBrushItem&>(rItem); + const Color& rColor = rBackground.GetColor(); + + ScTabViewShell* pViewShell = pViewData->GetViewShell(); + pViewShell->libreOfficeKitViewCallback(LOK_CALLBACK_DOCUMENT_BACKGROUND_COLOR, rColor.AsRGBHexString().toUtf8().getStr()); +} + +void ScModelObj::setClientZoom(int nTilePixelWidth_, int nTilePixelHeight_, int nTileTwipWidth_, int nTileTwipHeight_) +{ + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return; + + // Currently in LOK clients the doc background cannot be changed, so send this sparingly as possible but for every view. + // FIXME: Find a better place to trigger this callback where it would be called just once per view creation. + // Doing this in ScTabViewShell init code does not work because callbacks do not work at that point for the first view. + lcl_sendLOKDocumentBackground(pViewData); + + const Fraction newZoomX(o3tl::toTwips(nTilePixelWidth_, o3tl::Length::px), nTileTwipWidth_); + const Fraction newZoomY(o3tl::toTwips(nTilePixelHeight_, o3tl::Length::px), nTileTwipHeight_); + + double fDeltaPPTX = std::abs(ScGlobal::nScreenPPTX * static_cast<double>(newZoomX) - pViewData->GetPPTX()); + double fDeltaPPTY = std::abs(ScGlobal::nScreenPPTY * static_cast<double>(newZoomY) - pViewData->GetPPTY()); + constexpr double fEps = 1E-08; + + if (pViewData->GetZoomX() == newZoomX && pViewData->GetZoomY() == newZoomY && fDeltaPPTX < fEps && fDeltaPPTY < fEps) + return; + + pViewData->SetZoom(newZoomX, newZoomY, true); + + // refresh our view's take on other view's cursors & selections + pViewData->GetActiveWin()->updateKitOtherCursors(); + pViewData->GetActiveWin()->updateOtherKitSelections(); + + if (ScDrawView* pDrawView = pViewData->GetScDrawView()) + pDrawView->resetGridOffsetsForAllSdrPageViews(); +} + +void ScModelObj::getRowColumnHeaders(const tools::Rectangle& rRectangle, tools::JsonWriter& rJsonWriter) +{ + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return; + + ScTabView* pTabView = pViewData->GetView(); + if (!pTabView) + return; + + pTabView->getRowColumnHeaders(rRectangle, rJsonWriter); +} + +OString ScModelObj::getSheetGeometryData(bool bColumns, bool bRows, bool bSizes, bool bHidden, + bool bFiltered, bool bGroups) +{ + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return ""; + + ScTabView* pTabView = pViewData->GetView(); + if (!pTabView) + return ""; + + return pTabView->getSheetGeometryData(bColumns, bRows, bSizes, bHidden, bFiltered, bGroups); +} + +void ScModelObj::getCellCursor(tools::JsonWriter& rJsonWriter) +{ + SolarMutexGuard aGuard; + + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return; + + ScGridWindow* pGridWindow = pViewData->GetActiveWin(); + if (!pGridWindow) + return; + + rJsonWriter.put("commandName", ".uno:CellCursor"); + rJsonWriter.put("commandValues", pGridWindow->getCellCursor()); +} + +PointerStyle ScModelObj::getPointer() +{ + SolarMutexGuard aGuard; + + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return PointerStyle::Arrow; + + ScGridWindow* pGridWindow = pViewData->GetActiveWin(); + if (!pGridWindow) + return PointerStyle::Arrow; + + return pGridWindow->GetPointer(); +} + +void ScModelObj::getTrackedChanges(tools::JsonWriter& rJson) +{ + if (pDocShell) + { + if (ScChangeTrack* pChangeTrack = pDocShell->GetDocument().GetChangeTrack()) + pChangeTrack->GetChangeTrackInfo(rJson); + } +} + +void ScModelObj::setClientVisibleArea(const tools::Rectangle& rRectangle) +{ + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return; + + // set the PgUp/PgDown offset + pViewData->ForcePageUpDownOffset(rRectangle.GetHeight()); + + // Store the visible area so that we can use at places like shape insertion + pViewData->setLOKVisibleArea(rRectangle); + + if (comphelper::LibreOfficeKit::isCompatFlagSet( + comphelper::LibreOfficeKit::Compat::scPrintTwipsMsgs)) + { + ScTabView* pTabView = pViewData->GetView(); + if (pTabView) + pTabView->extendTiledAreaIfNeeded(); + } +} + +void ScModelObj::setOutlineState(bool bColumn, int nLevel, int nIndex, bool bHidden) +{ + ScViewData* pViewData = ScDocShell::GetViewData(); + if (!pViewData) + return; + + ScDBFunc* pFunc = pViewData->GetView(); + + if (pFunc) + pFunc->SetOutlineState(bColumn, nLevel, nIndex, bHidden); +} + +void ScModelObj::getPostIts(tools::JsonWriter& rJsonWriter) +{ + if (!pDocShell) + return; + + ScDocument& rDoc = pDocShell->GetDocument(); + std::vector<sc::NoteEntry> aNotes; + rDoc.GetAllNoteEntries(aNotes); + + auto commentsNode = rJsonWriter.startArray("comments"); + for (const sc::NoteEntry& aNote : aNotes) + { + auto commentNode = rJsonWriter.startStruct(); + + rJsonWriter.put("id", aNote.mpNote->GetId()); + rJsonWriter.put("tab", aNote.maPos.Tab()); + rJsonWriter.put("author", aNote.mpNote->GetAuthor()); + rJsonWriter.put("dateTime", aNote.mpNote->GetDate()); + rJsonWriter.put("text", aNote.mpNote->GetText()); + + // Calculating the cell cursor position + if (ScViewData* pViewData = ScDocShell::GetViewData()) + { + ScGridWindow* pGridWindow = pViewData->GetActiveWin(); + if (pGridWindow) + { + SCCOL nX = aNote.maPos.Col(); + SCROW nY = aNote.maPos.Row(); + Point aScrPos = pViewData->GetScrPos(nX, nY, pViewData->GetActivePart(), true); + tools::Long nSizeXPix; + tools::Long nSizeYPix; + pViewData->GetMergeSizePixel(nX, nY, nSizeXPix, nSizeYPix); + + double fPPTX = pViewData->GetPPTX(); + double fPPTY = pViewData->GetPPTY(); + tools::Rectangle aRect(Point(aScrPos.getX() / fPPTX, aScrPos.getY() / fPPTY), + Size(nSizeXPix / fPPTX, nSizeYPix / fPPTY)); + + rJsonWriter.put("cellPos", aRect.toString()); + } + } + } +} + +void ScModelObj::getPostItsPos(tools::JsonWriter& rJsonWriter) +{ + if (!pDocShell) + return; + + ScDocument& rDoc = pDocShell->GetDocument(); + std::vector<sc::NoteEntry> aNotes; + rDoc.GetAllNoteEntries(aNotes); + + auto commentsNode = rJsonWriter.startArray("commentsPos"); + for (const sc::NoteEntry& aNote : aNotes) + { + auto commentNode = rJsonWriter.startStruct(); + + rJsonWriter.put("id", aNote.mpNote->GetId()); + rJsonWriter.put("tab", aNote.maPos.Tab()); + + // Calculating the cell cursor position + if (ScViewData* pViewData = ScDocShell::GetViewData()) + { + ScGridWindow* pGridWindow = pViewData->GetActiveWin(); + if (pGridWindow) + { + SCCOL nX = aNote.maPos.Col(); + SCROW nY = aNote.maPos.Row(); + Point aScrPos = pViewData->GetScrPos(nX, nY, pViewData->GetActivePart(), true); + tools::Long nSizeXPix; + tools::Long nSizeYPix; + pViewData->GetMergeSizePixel(nX, nY, nSizeXPix, nSizeYPix); + + double fPPTX = pViewData->GetPPTX(); + double fPPTY = pViewData->GetPPTY(); + tools::Rectangle aRect(Point(aScrPos.getX() / fPPTX, aScrPos.getY() / fPPTY), + Size(nSizeXPix / fPPTX, nSizeYPix / fPPTY)); + + rJsonWriter.put("cellPos", aRect.toString()); + } + } + } +} + +void ScModelObj::completeFunction(const OUString& rFunctionName) +{ + ScInputHandler* pHdl = SC_MOD()->GetInputHdl(); + if (pHdl) + { + assert(!rFunctionName.isEmpty()); + pHdl->LOKPasteFunctionData(rFunctionName); + } +} + +void ScModelObj::initializeForTiledRendering(const css::uno::Sequence<css::beans::PropertyValue>& rArguments) +{ + SolarMutexGuard aGuard; + + // enable word autocompletion + ScAppOptions aAppOptions(SC_MOD()->GetAppOptions()); + aAppOptions.SetAutoComplete(true); + SC_MOD()->SetAppOptions(aAppOptions); + + for (const beans::PropertyValue& rValue : rArguments) + { + if (rValue.Name == ".uno:SpellOnline" && rValue.Value.has<bool>()) + { + ScDocOptions options = GetDocument()->GetDocOptions(); + options.SetAutoSpell(rValue.Value.get<bool>()); + GetDocument()->SetDocOptions(options); + } + } + + // show us the text exactly + ScInputOptions aInputOptions(SC_MOD()->GetInputOptions()); + aInputOptions.SetTextWysiwyg(true); + aInputOptions.SetReplaceCellsWarn(false); + SC_MOD()->SetInputOptions(aInputOptions); + pDocShell->CalcOutputFactor(); + + // when the "This document may contain formatting or content that cannot + // be saved..." dialog appears, it is auto-cancelled with tiled rendering, + // causing 'Save' being disabled; so let's always save to the original + // format + auto xChanges = comphelper::ConfigurationChanges::create(); + officecfg::Office::Common::Save::Document::WarnAlienFormat::set(false, xChanges); + xChanges->commit(); +} + +uno::Any SAL_CALL ScModelObj::queryInterface( const uno::Type& rType ) +{ + SC_QUERYINTERFACE( sheet::XSpreadsheetDocument ) + SC_QUERYINTERFACE( document::XActionLockable ) + SC_QUERYINTERFACE( sheet::XCalculatable ) + SC_QUERYINTERFACE( util::XProtectable ) + SC_QUERYINTERFACE( drawing::XDrawPagesSupplier ) + SC_QUERYINTERFACE( sheet::XGoalSeek ) + SC_QUERYINTERFACE( sheet::XConsolidatable ) + SC_QUERYINTERFACE( sheet::XDocumentAuditing ) + SC_QUERYINTERFACE( style::XStyleFamiliesSupplier ) + SC_QUERYINTERFACE( view::XRenderable ) + SC_QUERYINTERFACE( document::XLinkTargetSupplier ) + SC_QUERYINTERFACE( beans::XPropertySet ) + SC_QUERYINTERFACE( lang::XMultiServiceFactory ) + SC_QUERYINTERFACE( lang::XServiceInfo ) + SC_QUERYINTERFACE( util::XChangesNotifier ) + SC_QUERYINTERFACE( sheet::opencl::XOpenCLSelection ) + SC_QUERYINTERFACE( chart2::XDataProviderAccess ) + + uno::Any aRet(SfxBaseModel::queryInterface( rType )); + if ( !aRet.hasValue() + && rType != cppu::UnoType<css::document::XDocumentEventBroadcaster>::get() + && rType != cppu::UnoType<css::frame::XController>::get() + && rType != cppu::UnoType<css::frame::XFrame>::get() + && rType != cppu::UnoType<css::script::XInvocation>::get() + && rType != cppu::UnoType<css::beans::XFastPropertySet>::get() + && rType != cppu::UnoType<css::awt::XWindow>::get()) + { + GetFormatter(); + if ( xNumberAgg.is() ) + aRet = xNumberAgg->queryAggregation( rType ); + } + + return aRet; +} + +void SAL_CALL ScModelObj::acquire() noexcept +{ + SfxBaseModel::acquire(); +} + +void SAL_CALL ScModelObj::release() noexcept +{ + SfxBaseModel::release(); +} + +uno::Sequence<uno::Type> SAL_CALL ScModelObj::getTypes() +{ + static const uno::Sequence<uno::Type> aTypes = [&]() + { + uno::Sequence<uno::Type> aAggTypes; + if ( GetFormatter().is() ) + { + const uno::Type& rProvType = cppu::UnoType<lang::XTypeProvider>::get(); + uno::Any aNumProv(xNumberAgg->queryAggregation(rProvType)); + if(auto xNumProv + = o3tl::tryAccess<uno::Reference<lang::XTypeProvider>>(aNumProv)) + { + aAggTypes = (*xNumProv)->getTypes(); + } + } + return comphelper::concatSequences( + SfxBaseModel::getTypes(), + aAggTypes, + uno::Sequence<uno::Type> + { + cppu::UnoType<sheet::XSpreadsheetDocument>::get(), + cppu::UnoType<document::XActionLockable>::get(), + cppu::UnoType<sheet::XCalculatable>::get(), + cppu::UnoType<util::XProtectable>::get(), + cppu::UnoType<drawing::XDrawPagesSupplier>::get(), + cppu::UnoType<sheet::XGoalSeek>::get(), + cppu::UnoType<sheet::XConsolidatable>::get(), + cppu::UnoType<sheet::XDocumentAuditing>::get(), + cppu::UnoType<style::XStyleFamiliesSupplier>::get(), + cppu::UnoType<view::XRenderable>::get(), + cppu::UnoType<document::XLinkTargetSupplier>::get(), + cppu::UnoType<beans::XPropertySet>::get(), + cppu::UnoType<lang::XMultiServiceFactory>::get(), + cppu::UnoType<lang::XServiceInfo>::get(), + cppu::UnoType<util::XChangesNotifier>::get(), + cppu::UnoType<sheet::opencl::XOpenCLSelection>::get(), + } ); + }(); + return aTypes; +} + +uno::Sequence<sal_Int8> SAL_CALL ScModelObj::getImplementationId() +{ + return css::uno::Sequence<sal_Int8>(); +} + +void ScModelObj::Notify( SfxBroadcaster& rBC, const SfxHint& rHint ) +{ + // Not interested in reference update hints here + + const SfxHintId nId = rHint.GetId(); + if ( nId == SfxHintId::Dying ) + { + pDocShell = nullptr; // has become invalid + if (xNumberAgg.is()) + { + SvNumberFormatsSupplierObj* pNumFmt = + comphelper::getFromUnoTunnel<SvNumberFormatsSupplierObj>( + uno::Reference<util::XNumberFormatsSupplier>(xNumberAgg, uno::UNO_QUERY) ); + if ( pNumFmt ) + pNumFmt->SetNumberFormatter( nullptr ); + } + + pPrintFuncCache.reset(); // must be deleted because it has a pointer to the DocShell + m_pPrintState.reset(); + } + else if ( nId == SfxHintId::DataChanged ) + { + // cached data for rendering become invalid when contents change + // (if a broadcast is added to SetDrawModified, is has to be tested here, too) + + pPrintFuncCache.reset(); + m_pPrintState.reset(); + + // handle "OnCalculate" sheet events (search also for VBA event handlers) + if ( pDocShell ) + { + ScDocument& rDoc = pDocShell->GetDocument(); + if ( rDoc.GetVbaEventProcessor().is() ) + { + // If the VBA event processor is set, HasAnyCalcNotification is much faster than HasAnySheetEventScript + if ( rDoc.HasAnyCalcNotification() && rDoc.HasAnySheetEventScript( ScSheetEventId::CALCULATE, true ) ) + HandleCalculateEvents(); + } + else + { + if ( rDoc.HasAnySheetEventScript( ScSheetEventId::CALCULATE ) ) + HandleCalculateEvents(); + } + } + } + + // always call parent - SfxBaseModel might need to handle the same hints again + SfxBaseModel::Notify( rBC, rHint ); // SfxBaseModel is derived from SfxListener +} + +// XSpreadsheetDocument + +uno::Reference<sheet::XSpreadsheets> SAL_CALL ScModelObj::getSheets() +{ + SolarMutexGuard aGuard; + if (pDocShell) + return new ScTableSheetsObj(pDocShell); + return nullptr; +} + +css::uno::Reference< ::css::chart2::data::XDataProvider > SAL_CALL ScModelObj::createDataProvider() +{ + if (pDocShell) + { + return css::uno::Reference< ::css::chart2::data::XDataProvider > ( + ScServiceProvider::MakeInstance(ScServiceProvider::Type::CHDATAPROV, pDocShell), uno::UNO_QUERY); + } + return nullptr; +} + +// XStyleFamiliesSupplier + +uno::Reference<container::XNameAccess> SAL_CALL ScModelObj::getStyleFamilies() +{ + SolarMutexGuard aGuard; + if (pDocShell) + return new ScStyleFamiliesObj(pDocShell); + return nullptr; +} + +// XRenderable + +static OutputDevice* lcl_GetRenderDevice( const uno::Sequence<beans::PropertyValue>& rOptions ) +{ + OutputDevice* pRet = nullptr; + for (const beans::PropertyValue& rProp : rOptions) + { + const OUString & rPropName = rProp.Name; + + if (rPropName == SC_UNONAME_RENDERDEV) + { + uno::Reference<awt::XDevice> xRenderDevice(rProp.Value, uno::UNO_QUERY); + if ( xRenderDevice.is() ) + { + VCLXDevice* pDevice = comphelper::getFromUnoTunnel<VCLXDevice>( xRenderDevice ); + if ( pDevice ) + { + pRet = pDevice->GetOutputDevice().get(); + pRet->SetDigitLanguage( SC_MOD()->GetOptDigitLanguage() ); + } + } + } + } + return pRet; +} + +static bool lcl_ParseTarget( const OUString& rTarget, ScRange& rTargetRange, tools::Rectangle& rTargetRect, + bool& rIsSheet, ScDocument& rDoc, SCTAB nSourceTab ) +{ + // test in same order as in SID_CURRENTCELL execute + + ScAddress aAddress; + SCTAB nNameTab; + sal_Int32 nNumeric = 0; + + bool bRangeValid = false; + bool bRectValid = false; + + if ( rTargetRange.Parse( rTarget, rDoc ) & ScRefFlags::VALID ) + { + bRangeValid = true; // range reference + } + else if ( aAddress.Parse( rTarget, rDoc ) & ScRefFlags::VALID ) + { + rTargetRange = aAddress; + bRangeValid = true; // cell reference + } + else if ( ScRangeUtil::MakeRangeFromName( rTarget, rDoc, nSourceTab, rTargetRange ) || + ScRangeUtil::MakeRangeFromName( rTarget, rDoc, nSourceTab, rTargetRange, RUTL_DBASE ) ) + { + bRangeValid = true; // named range or database range + } + else if ( comphelper::string::isdigitAsciiString(rTarget) && + ( nNumeric = rTarget.toInt32() ) > 0 && nNumeric <= rDoc.MaxRow()+1 ) + { + // row number is always mapped to cell A(row) on the same sheet + rTargetRange = ScAddress( 0, static_cast<SCROW>(nNumeric-1), nSourceTab ); // target row number is 1-based + bRangeValid = true; // row number + } + else if ( rDoc.GetTable( rTarget, nNameTab ) ) + { + rTargetRange = ScAddress(0,0,nNameTab); + bRangeValid = true; // sheet name + rIsSheet = true; // needs special handling (first page of the sheet) + } + else + { + // look for named drawing object + + ScDrawLayer* pDrawLayer = rDoc.GetDrawLayer(); + if ( pDrawLayer ) + { + SCTAB nTabCount = rDoc.GetTableCount(); + for (SCTAB i=0; i<nTabCount && !bRangeValid; i++) + { + SdrPage* pPage = pDrawLayer->GetPage(static_cast<sal_uInt16>(i)); + OSL_ENSURE(pPage,"Page ?"); + if (pPage) + { + SdrObjListIter aIter( pPage, SdrIterMode::DeepWithGroups ); + SdrObject* pObject = aIter.Next(); + while (pObject && !bRangeValid) + { + if ( ScDrawLayer::GetVisibleName( pObject ) == rTarget ) + { + rTargetRect = pObject->GetLogicRect(); // 1/100th mm + rTargetRange = rDoc.GetRange( i, rTargetRect ); // underlying cells + bRangeValid = bRectValid = true; // rectangle is valid + } + pObject = aIter.Next(); + } + } + } + } + } + if ( bRangeValid && !bRectValid ) + { + // get rectangle for cell range + rTargetRect = rDoc.GetMMRect( rTargetRange.aStart.Col(), rTargetRange.aStart.Row(), + rTargetRange.aEnd.Col(), rTargetRange.aEnd.Row(), + rTargetRange.aStart.Tab() ); + } + + return bRangeValid; +} + +bool ScModelObj::FillRenderMarkData( const uno::Any& aSelection, + const uno::Sequence< beans::PropertyValue >& rOptions, + ScMarkData& rMark, + ScPrintSelectionStatus& rStatus, OUString& rPagesStr, + bool& rbRenderToGraphic ) const +{ + OSL_ENSURE( !rMark.IsMarked() && !rMark.IsMultiMarked(), "FillRenderMarkData: MarkData must be empty" ); + OSL_ENSURE( pDocShell, "FillRenderMarkData: DocShell must be set" ); + + bool bDone = false; + + uno::Reference<frame::XController> xView; + + // defaults when no options are passed: all sheets, include empty pages + bool bSelectedSheetsOnly = false; + bool bSuppressEmptyPages = true; + + bool bHasPrintContent = false; + sal_Int32 nPrintContent = 0; // all sheets / selected sheets / selected cells + sal_Int32 nPrintRange = 0; // all pages / pages + sal_Int32 nEOContent = 0; // even pages / odd pages + OUString aPageRange; // "pages" edit value + + for( const auto& rOption : rOptions ) + { + if ( rOption.Name == "IsOnlySelectedSheets" ) + { + rOption.Value >>= bSelectedSheetsOnly; + } + else if ( rOption.Name == "IsSuppressEmptyPages" ) + { + rOption.Value >>= bSuppressEmptyPages; + } + else if ( rOption.Name == "PageRange" ) + { + rOption.Value >>= aPageRange; + } + else if ( rOption.Name == "PrintRange" ) + { + rOption.Value >>= nPrintRange; + } + else if ( rOption.Name == "EvenOdd" ) + { + rOption.Value >>= nEOContent; + } + else if ( rOption.Name == "PrintContent" ) + { + bHasPrintContent = true; + rOption.Value >>= nPrintContent; + } + else if ( rOption.Name == "View" ) + { + rOption.Value >>= xView; + } + else if ( rOption.Name == "RenderToGraphic" ) + { + rOption.Value >>= rbRenderToGraphic; + } + } + + // "Print Content" selection wins over "Selected Sheets" option + if ( bHasPrintContent ) + bSelectedSheetsOnly = ( nPrintContent != 0 ); + + uno::Reference<uno::XInterface> xInterface(aSelection, uno::UNO_QUERY); + if ( xInterface.is() ) + { + ScCellRangesBase* pSelObj = comphelper::getFromUnoTunnel<ScCellRangesBase>( xInterface ); + uno::Reference< drawing::XShapes > xShapes( xInterface, uno::UNO_QUERY ); + if ( pSelObj && pSelObj->GetDocShell() == pDocShell ) + { + bool bSheet = ( comphelper::getFromUnoTunnel<ScTableSheetObj>( xInterface ) != nullptr ); + bool bCursor = pSelObj->IsCursorOnly(); + const ScRangeList& rRanges = pSelObj->GetRangeList(); + + rMark.MarkFromRangeList( rRanges, false ); + rMark.MarkToSimple(); + + if ( rMark.IsMultiMarked() ) + { + // #i115266# copy behavior of old printing: + // treat multiple selection like a single selection with the enclosing range + const ScRange& aMultiMarkArea = rMark.GetMultiMarkArea(); + rMark.ResetMark(); + rMark.SetMarkArea( aMultiMarkArea ); + } + + if ( rMark.IsMarked() && !rMark.IsMultiMarked() ) + { + // a sheet object is treated like an empty selection: print the used area of the sheet + + if ( bCursor || bSheet ) // nothing selected -> use whole tables + { + rMark.ResetMark(); // doesn't change table selection + rStatus.SetMode( ScPrintSelectionMode::Cursor ); + } + else + rStatus.SetMode( ScPrintSelectionMode::Range ); + + rStatus.SetRanges( rRanges ); + bDone = true; + } + // multi selection isn't supported + } + else if( xShapes.is() ) + { + //print a selected ole object + // multi selection isn't supported yet + uno::Reference< drawing::XShape > xShape( xShapes->getByIndex(0), uno::UNO_QUERY ); + SdrObject* pSdrObj = SdrObject::getSdrObjectFromXShape( xShape ); + if( pSdrObj && pDocShell ) + { + ScDocument& rDoc = pDocShell->GetDocument(); + tools::Rectangle aObjRect = pSdrObj->GetCurrentBoundRect(); + SCTAB nCurrentTab = ScDocShell::GetCurTab(); + ScRange aRange = rDoc.GetRange( nCurrentTab, aObjRect ); + rMark.SetMarkArea( aRange ); + + if( rMark.IsMarked() && !rMark.IsMultiMarked() ) + { + rStatus.SetMode( ScPrintSelectionMode::RangeExclusivelyOleAndDrawObjects ); + bDone = true; + } + } + } + else if ( comphelper::getFromUnoTunnel<ScModelObj>( xInterface ) == this ) + { + // render the whole document + // -> no selection, all sheets + + SCTAB nTabCount = pDocShell->GetDocument().GetTableCount(); + for (SCTAB nTab = 0; nTab < nTabCount; nTab++) + rMark.SelectTable( nTab, true ); + rStatus.SetMode( ScPrintSelectionMode::Document ); + bDone = true; + } + // other selection types aren't supported + } + + // restrict to selected sheets if a view is available + uno::Reference<sheet::XSelectedSheetsSupplier> xSelectedSheets(xView, uno::UNO_QUERY); + if (bSelectedSheetsOnly && pDocShell && xSelectedSheets.is()) + { + const uno::Sequence<sal_Int32> aSelected = xSelectedSheets->getSelectedSheets(); + ScMarkData::MarkedTabsType aSelectedTabs; + SCTAB nMaxTab = pDocShell->GetDocument().GetTableCount() -1; + for (const auto& rSelected : aSelected) + { + SCTAB nSelected = static_cast<SCTAB>(rSelected); + if (ValidTab(nSelected, nMaxTab)) + aSelectedTabs.insert(nSelected); + } + rMark.SetSelectedTabs(aSelectedTabs); + } + + ScPrintOptions aNewOptions; + aNewOptions.SetSkipEmpty( bSuppressEmptyPages ); + aNewOptions.SetAllSheets( !bSelectedSheetsOnly ); + rStatus.SetOptions( aNewOptions ); + + // "PrintRange" enables (1) or disables (0) the "PageRange" edit + if ( nPrintRange == 1 ) + rPagesStr = aPageRange; + else + rPagesStr.clear(); + + return bDone; +} + +sal_Int32 SAL_CALL ScModelObj::getRendererCount(const uno::Any& aSelection, + const uno::Sequence<beans::PropertyValue>& rOptions) +{ + SolarMutexGuard aGuard; + if (!pDocShell) + { + throw lang::DisposedException( OUString(), + static_cast< sheet::XSpreadsheetDocument* >(this) ); + } + + ScMarkData aMark(GetDocument()->GetSheetLimits()); + ScPrintSelectionStatus aStatus; + OUString aPagesStr; + bool bRenderToGraphic = false; + if ( !FillRenderMarkData( aSelection, rOptions, aMark, aStatus, aPagesStr, bRenderToGraphic ) ) + return 0; + + // The same ScPrintFuncCache object in pPrintFuncCache is used as long as + // the same selection is used (aStatus) and the document isn't changed + // (pPrintFuncCache is cleared in Notify handler) + + if ( !pPrintFuncCache || !pPrintFuncCache->IsSameSelection( aStatus ) ) + { + pPrintFuncCache.reset(new ScPrintFuncCache( pDocShell, aMark, aStatus )); + } + sal_Int32 nPages = pPrintFuncCache->GetPageCount(); + + m_pPrintState.reset(); + maValidPages.clear(); + + sal_Int32 nContent = 0; + sal_Int32 nEOContent = 0; + bool bSinglePageSheets = false; + for ( const auto& rValue : rOptions) + { + if ( rValue.Name == "PrintRange" ) + { + rValue.Value >>= nContent; + } + else if ( rValue.Name == "SinglePageSheets" ) + { + rValue.Value >>= bSinglePageSheets; + } + else if ( rValue.Name == "EvenOdd" ) + { + rValue.Value >>= nEOContent; + } + } + + if (bSinglePageSheets) + { + return pDocShell->GetDocument().GetTableCount(); + } + + bool bIsPrintEvenPages = (nEOContent != 1 && nContent == 0) || nContent != 0; + bool bIsPrintOddPages = (nEOContent != 2 && nContent == 0) || nContent != 0; + + for ( sal_Int32 nPage = 1; nPage <= nPages; nPage++ ) + { + if ( (bIsPrintEvenPages && IsOnEvenPage( nPage )) || (bIsPrintOddPages && !IsOnEvenPage( nPage )) ) + maValidPages.push_back( nPage ); + } + + sal_Int32 nSelectCount = static_cast<sal_Int32>( maValidPages.size() ); + + if ( nEOContent == 1 || nEOContent == 2 ) // even pages / odd pages + return nSelectCount; + + if ( !aPagesStr.isEmpty() ) + { + StringRangeEnumerator aRangeEnum( aPagesStr, 0, nPages-1 ); + nSelectCount = aRangeEnum.size(); + } + return (nSelectCount > 0) ? nSelectCount : 1; +} + +static sal_Int32 lcl_GetRendererNum( sal_Int32 nSelRenderer, std::u16string_view rPagesStr, sal_Int32 nTotalPages ) +{ + if ( rPagesStr.empty() ) + return nSelRenderer; + + StringRangeEnumerator aRangeEnum( rPagesStr, 0, nTotalPages-1 ); + StringRangeEnumerator::Iterator aIter = aRangeEnum.begin(); + StringRangeEnumerator::Iterator aEnd = aRangeEnum.end(); + for ( ; nSelRenderer > 0 && aIter != aEnd; --nSelRenderer ) + ++aIter; + + return *aIter; // returns -1 if reached the end +} + +static bool lcl_renderSelectionToGraphic( bool bRenderToGraphic, const ScPrintSelectionStatus& rStatus ) +{ + return bRenderToGraphic && rStatus.GetMode() == ScPrintSelectionMode::Range; +} + +uno::Sequence<beans::PropertyValue> SAL_CALL ScModelObj::getRenderer( sal_Int32 nSelRenderer, + const uno::Any& aSelection, const uno::Sequence<beans::PropertyValue>& rOptions ) +{ + SolarMutexGuard aGuard; + if (!pDocShell) + { + throw lang::DisposedException( OUString(), + static_cast< sheet::XSpreadsheetDocument* >(this) ); + } + + ScMarkData aMark(pDocShell->GetDocument().GetSheetLimits()); + ScPrintSelectionStatus aStatus; + OUString aPagesStr; + // #i115266# if FillRenderMarkData fails, keep nTotalPages at 0, but still handle getRenderer(0) below + tools::Long nTotalPages = 0; + bool bRenderToGraphic = false; + bool bSinglePageSheets = false; + if ( FillRenderMarkData( aSelection, rOptions, aMark, aStatus, aPagesStr, bRenderToGraphic ) ) + { + if ( !pPrintFuncCache || !pPrintFuncCache->IsSameSelection( aStatus ) ) + { + pPrintFuncCache.reset(new ScPrintFuncCache( pDocShell, aMark, aStatus )); + } + nTotalPages = pPrintFuncCache->GetPageCount(); + } + + for ( const auto& rValue : rOptions) + { + if ( rValue.Name == "SinglePageSheets" ) + { + rValue.Value >>= bSinglePageSheets; + break; + } + } + + if (bSinglePageSheets) + nTotalPages = pDocShell->GetDocument().GetTableCount(); + + sal_Int32 nRenderer = lcl_GetRendererNum( nSelRenderer, aPagesStr, nTotalPages ); + + if ( nRenderer < 0 ) + { + if ( nSelRenderer != 0 ) + throw lang::IllegalArgumentException(); + + // getRenderer(0) is used to query the settings, so it must always return something + + awt::Size aPageSize; + if (lcl_renderSelectionToGraphic( bRenderToGraphic, aStatus)) + { + assert( aMark.IsMarked()); + const ScRange& aRange = aMark.GetMarkArea(); + tools::Rectangle aMMRect( pDocShell->GetDocument().GetMMRect( + aRange.aStart.Col(), aRange.aStart.Row(), + aRange.aEnd.Col(), aRange.aEnd.Row(), aRange.aStart.Tab())); + aPageSize.Width = aMMRect.GetWidth(); + aPageSize.Height = aMMRect.GetHeight(); + } + else + { + SCTAB const nCurTab = 0; //! use current sheet from view? + ScPrintFunc aDefaultFunc( pDocShell, pDocShell->GetPrinter(), nCurTab ); + Size aTwips = aDefaultFunc.GetPageSize(); + aPageSize.Width = convertTwipToMm100(aTwips.Width()); + aPageSize.Height = convertTwipToMm100(aTwips.Height()); + } + + uno::Sequence<beans::PropertyValue> aSequence( comphelper::InitPropertySequence({ + { SC_UNONAME_PAGESIZE, uno::Any(aPageSize) } + })); + + if( ! pPrinterOptions ) + pPrinterOptions.reset(new ScPrintUIOptions); + else + pPrinterOptions->SetDefaults(); + pPrinterOptions->appendPrintUIOptions( aSequence ); + return aSequence; + + } + + // printer is used as device (just for page layout), draw view is not needed + + SCTAB nTab; + if (bSinglePageSheets) + nTab = nSelRenderer; + else if ( !maValidPages.empty() ) + nTab = pPrintFuncCache->GetTabForPage( maValidPages.at( nRenderer )-1 ); + else + nTab = pPrintFuncCache->GetTabForPage( nRenderer ); + + + ScRange aRange; + const ScRange* pSelRange = nullptr; + if ( bSinglePageSheets ) + { + SCCOL nStartCol; + SCROW nStartRow; + const ScDocument* pDocument = &pDocShell->GetDocument(); + pDocument->GetDataStart( nTab, nStartCol, nStartRow ); + SCCOL nEndCol; + SCROW nEndRow; + pDocument->GetPrintArea( nTab, nEndCol, nEndRow ); + + aRange.aStart = ScAddress(nStartCol, nStartRow, nTab); + aRange.aEnd = ScAddress(nEndCol, nEndRow, nTab); + + table::CellRangeAddress aRangeAddress( nTab, + aRange.aStart.Col(), aRange.aStart.Row(), + aRange.aEnd.Col(), aRange.aEnd.Row() ); + tools::Rectangle aMMRect( pDocShell->GetDocument().GetMMRect( + aRange.aStart.Col(), aRange.aStart.Row(), + aRange.aEnd.Col(), aRange.aEnd.Row(), aRange.aStart.Tab())); + + const awt::Size aPageSize(aMMRect.GetWidth(), aMMRect.GetHeight()); + const awt::Point aCalcPagePos(aMMRect.Left(), aMMRect.Top()); + + uno::Sequence<beans::PropertyValue> aSequence + { + comphelper::makePropertyValue(SC_UNONAME_PAGESIZE, aPageSize), + // #i111158# all positions are relative to the whole page, including non-printable area + comphelper::makePropertyValue(SC_UNONAME_INC_NP_AREA, true), + comphelper::makePropertyValue(SC_UNONAME_SOURCERANGE, aRangeAddress), + comphelper::makePropertyValue(SC_UNONAME_CALCPAGESIZE, aPageSize), // TODO aPageSize too ? + comphelper::makePropertyValue(SC_UNONAME_CALCPAGEPOS, aCalcPagePos) + }; + + if( ! pPrinterOptions ) + pPrinterOptions.reset(new ScPrintUIOptions); + else + pPrinterOptions->SetDefaults(); + pPrinterOptions->appendPrintUIOptions( aSequence ); + return aSequence; + } + else if ( aMark.IsMarked() ) + { + aRange = aMark.GetMarkArea(); + pSelRange = &aRange; + } + + awt::Size aPageSize; + bool bWasCellRange = false; + ScRange aCellRange; + if (lcl_renderSelectionToGraphic( bRenderToGraphic, aStatus)) + { + bWasCellRange = true; + aCellRange = aRange; + tools::Rectangle aMMRect( pDocShell->GetDocument().GetMMRect( + aRange.aStart.Col(), aRange.aStart.Row(), + aRange.aEnd.Col(), aRange.aEnd.Row(), aRange.aStart.Tab())); + aPageSize.Width = aMMRect.GetWidth(); + aPageSize.Height = aMMRect.GetHeight(); + } + else + { + std::unique_ptr<ScPrintFunc, o3tl::default_delete<ScPrintFunc>> pPrintFunc; + if (m_pPrintState && m_pPrintState->nPrintTab == nTab) + pPrintFunc.reset(new ScPrintFunc(pDocShell, pDocShell->GetPrinter(), *m_pPrintState, &aStatus.GetOptions())); + else + pPrintFunc.reset(new ScPrintFunc(pDocShell, pDocShell->GetPrinter(), nTab, + pPrintFuncCache->GetFirstAttr(nTab), nTotalPages, pSelRange, &aStatus.GetOptions())); + pPrintFunc->SetRenderFlag( true ); + + sal_Int32 nContent = 0; + sal_Int32 nEOContent = 0; + for ( const auto& rValue : rOptions) + { + if ( rValue.Name == "PrintRange" ) + { + rValue.Value >>= nContent; + } + else if ( rValue.Name == "EvenOdd" ) + { + rValue.Value >>= nEOContent; + } + } + + MultiSelection aPage; + aPage.SetTotalRange( Range(0,RANGE_MAX) ); + + bool bOddOrEven = (nContent == 0 && nEOContent == 1) || (nContent == 1 && nEOContent == 2); // even pages or odd pages + // tdf#127682 when odd/even allow nRenderer of 0 even when maValidPages is empty + // to allow PrinterController::abortJob to spool an empty page as part of + // its abort procedure + if (bOddOrEven && !maValidPages.empty()) + aPage.Select( maValidPages.at(nRenderer) ); + else + aPage.Select( nRenderer+1 ); + + tools::Long nDisplayStart = pPrintFuncCache->GetDisplayStart( nTab ); + tools::Long nTabStart = pPrintFuncCache->GetTabStart( nTab ); + + (void)pPrintFunc->DoPrint( aPage, nTabStart, nDisplayStart, false, nullptr ); + + bWasCellRange = pPrintFunc->GetLastSourceRange( aCellRange ); + Size aTwips = pPrintFunc->GetPageSize(); + + if (!m_pPrintState) + { + m_pPrintState.reset(new ScPrintState()); + pPrintFunc->GetPrintState(*m_pPrintState, true); + } + + aPageSize.Width = convertTwipToMm100(aTwips.Width()); + aPageSize.Height = convertTwipToMm100(aTwips.Height()); + } + + tools::Long nPropCount = bWasCellRange ? 5 : 4; + uno::Sequence<beans::PropertyValue> aSequence(nPropCount); + beans::PropertyValue* pArray = aSequence.getArray(); + pArray[0].Name = SC_UNONAME_PAGESIZE; + pArray[0].Value <<= aPageSize; + // #i111158# all positions are relative to the whole page, including non-printable area + pArray[1].Name = SC_UNONAME_INC_NP_AREA; + pArray[1].Value <<= true; + if ( bWasCellRange ) + { + table::CellRangeAddress aRangeAddress( nTab, + aCellRange.aStart.Col(), aCellRange.aStart.Row(), + aCellRange.aEnd.Col(), aCellRange.aEnd.Row() ); + tools::Rectangle aMMRect( pDocShell->GetDocument().GetMMRect( + aCellRange.aStart.Col(), aCellRange.aStart.Row(), + aCellRange.aEnd.Col(), aCellRange.aEnd.Row(), aCellRange.aStart.Tab())); + + const awt::Size aCalcPageSize(aMMRect.GetWidth(), aMMRect.GetHeight()); + const awt::Point aCalcPagePos(aMMRect.Left(), aMMRect.Top()); + + pArray[2].Name = SC_UNONAME_SOURCERANGE; + pArray[2].Value <<= aRangeAddress; + pArray[3].Name = SC_UNONAME_CALCPAGESIZE; + pArray[3].Value <<= aCalcPageSize; + pArray[4].Name = SC_UNONAME_CALCPAGEPOS; + pArray[4].Value <<= aCalcPagePos; + } + + if( ! pPrinterOptions ) + pPrinterOptions.reset(new ScPrintUIOptions); + else + pPrinterOptions->SetDefaults(); + pPrinterOptions->appendPrintUIOptions( aSequence ); + return aSequence; +} + +void SAL_CALL ScModelObj::render( sal_Int32 nSelRenderer, const uno::Any& aSelection, + const uno::Sequence<beans::PropertyValue>& rOptions ) +{ + SolarMutexGuard aGuard; + if (!pDocShell) + { + throw lang::DisposedException( OUString(), + static_cast< sheet::XSpreadsheetDocument* >(this) ); + } + + ScMarkData aMark(pDocShell->GetDocument().GetSheetLimits()); + ScPrintSelectionStatus aStatus; + OUString aPagesStr; + bool bRenderToGraphic = false; + bool bSinglePageSheets = false; + if ( !FillRenderMarkData( aSelection, rOptions, aMark, aStatus, aPagesStr, bRenderToGraphic ) ) + throw lang::IllegalArgumentException(); + + if ( !pPrintFuncCache || !pPrintFuncCache->IsSameSelection( aStatus ) ) + { + pPrintFuncCache.reset(new ScPrintFuncCache( pDocShell, aMark, aStatus )); + } + tools::Long nTotalPages = pPrintFuncCache->GetPageCount(); + + for ( const auto& rValue : rOptions) + { + if ( rValue.Name == "SinglePageSheets" ) + { + rValue.Value >>= bSinglePageSheets; + break; + } + } + + if (bSinglePageSheets) + nTotalPages = pDocShell->GetDocument().GetTableCount(); + + sal_Int32 nRenderer = lcl_GetRendererNum( nSelRenderer, aPagesStr, nTotalPages ); + if ( nRenderer < 0 ) + throw lang::IllegalArgumentException(); + + OutputDevice* pDev = lcl_GetRenderDevice( rOptions ); + if ( !pDev ) + throw lang::IllegalArgumentException(); + + ScDocument& rDoc = pDocShell->GetDocument(); + + ScRange aRange; + const ScRange* pSelRange = nullptr; + if ( bSinglePageSheets ) + { + awt::Size aPageSize; + SCCOL nStartCol; + SCROW nStartRow; + rDoc.GetDataStart( nSelRenderer, nStartCol, nStartRow ); + SCCOL nEndCol; + SCROW nEndRow; + rDoc.GetPrintArea( nSelRenderer, nEndCol, nEndRow ); + + aRange.aStart = ScAddress(nStartCol, nStartRow, nSelRenderer); + aRange.aEnd = ScAddress(nEndCol, nEndRow, nSelRenderer); + + tools::Rectangle aMMRect( pDocShell->GetDocument().GetMMRect( + aRange.aStart.Col(), aRange.aStart.Row(), + aRange.aEnd.Col(), aRange.aEnd.Row(), aRange.aStart.Tab())); + + aPageSize.Width = aMMRect.GetWidth(); + aPageSize.Height = aMMRect.GetHeight(); + + //Set visible tab + SCTAB nVisTab = rDoc.GetVisibleTab(); + if (nVisTab != nSelRenderer) + { + nVisTab = nSelRenderer; + rDoc.SetVisibleTab(nVisTab); + } + + pDocShell->DoDraw(pDev, Point(0,0), Size(aPageSize.Width, aPageSize.Height), JobSetup()); + + return; + } + else if ( aMark.IsMarked() ) + { + aRange = aMark.GetMarkArea(); + pSelRange = &aRange; + } + + if (lcl_renderSelectionToGraphic( bRenderToGraphic, aStatus)) + { + // Similar to as in and when calling ScTransferObj::PaintToDev() + + tools::Rectangle aBound( Point(), pDev->GetOutputSize()); + + ScViewData aViewData(rDoc); + + aViewData.SetTabNo( aRange.aStart.Tab() ); + aViewData.SetScreen( aRange.aStart.Col(), aRange.aStart.Row(), aRange.aEnd.Col(), aRange.aEnd.Row() ); + + const double nPrintFactor = 1.0; /* XXX: currently (2017-08-28) is not evaluated */ + // The bMetaFile argument maybe could be + // pDev->GetConnectMetaFile() != nullptr + // but for some yet unknown reason does not draw cell content if true. + ScPrintFunc::DrawToDev( rDoc, pDev, nPrintFactor, aBound, &aViewData, false /*bMetaFile*/ ); + + return; + } + + struct DrawViewKeeper + { + std::unique_ptr<FmFormView> mpDrawView; + DrawViewKeeper() {} + ~DrawViewKeeper() + { + if (mpDrawView) + { + mpDrawView->HideSdrPage(); + mpDrawView.reset(); + } + } + } aDrawViewKeeper; + + SCTAB nTab; + if ( !maValidPages.empty() ) + nTab = pPrintFuncCache->GetTabForPage( maValidPages.at( nRenderer )-1 ); + else + nTab = pPrintFuncCache->GetTabForPage( nRenderer ); + + ScDrawLayer* pModel = rDoc.GetDrawLayer(); + + if( pModel ) + { + aDrawViewKeeper.mpDrawView.reset( new FmFormView( + *pModel, + pDev) ); + aDrawViewKeeper.mpDrawView->ShowSdrPage(aDrawViewKeeper.mpDrawView->GetModel()->GetPage(nTab)); + aDrawViewKeeper.mpDrawView->SetPrintPreview(); + } + + // to increase performance, ScPrintState might be used here for subsequent + // pages of the same sheet + + + std::unique_ptr<ScPrintFunc, o3tl::default_delete<ScPrintFunc>> pPrintFunc; + if (m_pPrintState && m_pPrintState->nPrintTab == nTab + && ! pSelRange) // tdf#120161 use selection to set required printed area + pPrintFunc.reset(new ScPrintFunc(pDev, pDocShell, *m_pPrintState, &aStatus.GetOptions())); + else + pPrintFunc.reset(new ScPrintFunc(pDev, pDocShell, nTab, pPrintFuncCache->GetFirstAttr(nTab), nTotalPages, pSelRange, &aStatus.GetOptions())); + + pPrintFunc->SetDrawView( aDrawViewKeeper.mpDrawView.get() ); + pPrintFunc->SetRenderFlag( true ); + if( aStatus.GetMode() == ScPrintSelectionMode::RangeExclusivelyOleAndDrawObjects ) + pPrintFunc->SetExclusivelyDrawOleAndDrawObjects(); + + sal_Int32 nContent = 0; + sal_Int32 nEOContent = 0; + for ( const auto& rValue : rOptions) + { + if ( rValue.Name == "PrintRange" ) + { + rValue.Value >>= nContent; + } + else if ( rValue.Name == "EvenOdd" ) + { + rValue.Value >>= nEOContent; + } + } + + MultiSelection aPage; + aPage.SetTotalRange( Range(0,RANGE_MAX) ); + + bool bOddOrEven = (nContent == 0 && nEOContent == 1) || (nContent == 0 && nEOContent == 2); // even pages or odd pages + // tdf#127682 when odd/even allow nRenderer of 0 even when maValidPages is empty + // to allow PrinterController::abortJob to spool an empty page as part of + // its abort procedure + if (bOddOrEven && !maValidPages.empty()) + aPage.Select( maValidPages.at( nRenderer ) ); + else + aPage.Select( nRenderer+1 ); + + tools::Long nDisplayStart = pPrintFuncCache->GetDisplayStart( nTab ); + tools::Long nTabStart = pPrintFuncCache->GetTabStart( nTab ); + + vcl::PDFExtOutDevData* pPDFData = dynamic_cast< vcl::PDFExtOutDevData* >(pDev->GetExtOutDevData() ); + if ( nRenderer == nTabStart ) + { + if (pPDFData) + { + css::lang::Locale const docLocale(LanguageTag(ScGlobal::GetEditDefaultLanguage()).getLocale()); + pPDFData->SetDocumentLocale(docLocale); + } + + // first page of a sheet: add outline item for the sheet name + + if ( pPDFData && pPDFData->GetIsExportBookmarks() ) + { + // the sheet starts at the top of the page + tools::Rectangle aArea( pDev->PixelToLogic( tools::Rectangle( 0,0,0,0 ) ) ); + sal_Int32 nDestID = pPDFData->CreateDest( aArea ); + OUString aTabName; + rDoc.GetName( nTab, aTabName ); + // top-level + pPDFData->CreateOutlineItem( -1/*nParent*/, aTabName, nDestID ); + } + // #i56629# add the named destination stuff + if( pPDFData && pPDFData->GetIsExportNamedDestinations() ) + { + tools::Rectangle aArea( pDev->PixelToLogic( tools::Rectangle( 0,0,0,0 ) ) ); + OUString aTabName; + rDoc.GetName( nTab, aTabName ); + //need the PDF page number here + pPDFData->CreateNamedDest( aTabName, aArea ); + } + } + + (void)pPrintFunc->DoPrint( aPage, nTabStart, nDisplayStart, true, nullptr ); + + if (!m_pPrintState) + { + m_pPrintState.reset(new ScPrintState()); + pPrintFunc->GetPrintState(*m_pPrintState, true); + } + + // resolve the hyperlinks for PDF export + + if ( !pPDFData || pPDFData->GetBookmarks().empty() ) + return; + + // iterate over the hyperlinks that were output for this page + + std::vector< vcl::PDFExtOutDevBookmarkEntry >& rBookmarks = pPDFData->GetBookmarks(); + for ( const auto& rBookmark : rBookmarks ) + { + OUString aBookmark = rBookmark.aBookmark; + if ( aBookmark.toChar() == '#' ) + { + // try to resolve internal link + + OUString aTarget( aBookmark.copy( 1 ) ); + + ScRange aTargetRange; + tools::Rectangle aTargetRect; // 1/100th mm + bool bIsSheet = false; + bool bValid = lcl_ParseTarget( aTarget, aTargetRange, aTargetRect, bIsSheet, rDoc, nTab ); + + if ( bValid ) + { + sal_Int32 nPage = -1; + tools::Rectangle aArea; + if ( bIsSheet ) + { + // Get first page for sheet (if nothing from that sheet is printed, + // this page can show a different sheet) + nPage = pPrintFuncCache->GetTabStart( aTargetRange.aStart.Tab() ); + aArea = pDev->PixelToLogic( tools::Rectangle( 0,0,0,0 ) ); + } + else + { + pPrintFuncCache->InitLocations( aMark, pDev ); // does nothing if already initialized + + ScPrintPageLocation aLocation; + if ( pPrintFuncCache->FindLocation( aTargetRange.aStart, aLocation ) ) + { + nPage = aLocation.nPage; + + // get the rectangle of the page's cell range in 1/100th mm + ScRange aLocRange = aLocation.aCellRange; + tools::Rectangle aLocationMM = rDoc.GetMMRect( + aLocRange.aStart.Col(), aLocRange.aStart.Row(), + aLocRange.aEnd.Col(), aLocRange.aEnd.Row(), + aLocRange.aStart.Tab() ); + tools::Rectangle aLocationPixel = aLocation.aRectangle; + + // Scale and move the target rectangle from aLocationMM to aLocationPixel, + // to get the target rectangle in pixels. + assert(aLocationPixel.GetWidth() != 0 && aLocationPixel.GetHeight() != 0); + + Fraction aScaleX( aLocationPixel.GetWidth(), aLocationMM.GetWidth() ); + Fraction aScaleY( aLocationPixel.GetHeight(), aLocationMM.GetHeight() ); + + tools::Long nX1 = aLocationPixel.Left() + static_cast<tools::Long>( Fraction( aTargetRect.Left() - aLocationMM.Left(), 1 ) * aScaleX ); + tools::Long nX2 = aLocationPixel.Left() + static_cast<tools::Long>( Fraction( aTargetRect.Right() - aLocationMM.Left(), 1 ) * aScaleX ); + tools::Long nY1 = aLocationPixel.Top() + static_cast<tools::Long>( Fraction( aTargetRect.Top() - aLocationMM.Top(), 1 ) * aScaleY ); + tools::Long nY2 = aLocationPixel.Top() + static_cast<tools::Long>( Fraction( aTargetRect.Bottom() - aLocationMM.Top(), 1 ) * aScaleY ); + + if ( nX1 > aLocationPixel.Right() ) nX1 = aLocationPixel.Right(); + if ( nX2 > aLocationPixel.Right() ) nX2 = aLocationPixel.Right(); + if ( nY1 > aLocationPixel.Bottom() ) nY1 = aLocationPixel.Bottom(); + if ( nY2 > aLocationPixel.Bottom() ) nY2 = aLocationPixel.Bottom(); + + // The link target area is interpreted using the device's MapMode at + // the time of the CreateDest call, so PixelToLogic can be used here, + // regardless of the MapMode that is actually selected. + aArea = pDev->PixelToLogic( tools::Rectangle( nX1, nY1, nX2, nY2 ) ); + } + } + + if ( nPage >= 0 ) + pPDFData->SetLinkDest( rBookmark.nLinkId, pPDFData->CreateDest( aArea, nPage ) ); + } + } + else + { + // external link, use as-is + pPDFData->SetLinkURL( rBookmark.nLinkId, aBookmark ); + } + } + rBookmarks.clear(); +} + +// XLinkTargetSupplier + +uno::Reference<container::XNameAccess> SAL_CALL ScModelObj::getLinks() +{ + SolarMutexGuard aGuard; + if (pDocShell) + return new ScLinkTargetTypesObj(pDocShell); + return nullptr; +} + +// XActionLockable + +sal_Bool SAL_CALL ScModelObj::isActionLocked() +{ + SolarMutexGuard aGuard; + bool bLocked = false; + if (pDocShell) + bLocked = ( pDocShell->GetLockCount() != 0 ); + return bLocked; +} + +void SAL_CALL ScModelObj::addActionLock() +{ + SolarMutexGuard aGuard; + if (pDocShell) + pDocShell->LockDocument(); +} + +void SAL_CALL ScModelObj::removeActionLock() +{ + SolarMutexGuard aGuard; + if (pDocShell) + pDocShell->UnlockDocument(); +} + +void SAL_CALL ScModelObj::setActionLocks( sal_Int16 nLock ) +{ + SolarMutexGuard aGuard; + if (pDocShell) + pDocShell->SetLockCount(nLock); +} + +sal_Int16 SAL_CALL ScModelObj::resetActionLocks() +{ + SolarMutexGuard aGuard; + sal_uInt16 nRet = 0; + if (pDocShell) + { + nRet = pDocShell->GetLockCount(); + pDocShell->SetLockCount(0); + } + return nRet; +} + +void SAL_CALL ScModelObj::lockControllers() +{ + SolarMutexGuard aGuard; + SfxBaseModel::lockControllers(); + if (pDocShell) + pDocShell->LockPaint(); +} + +void SAL_CALL ScModelObj::unlockControllers() +{ + SolarMutexGuard aGuard; + if (hasControllersLocked()) + { + SfxBaseModel::unlockControllers(); + if (pDocShell) + pDocShell->UnlockPaint(); + } +} + +// XCalculate + +void SAL_CALL ScModelObj::calculate() +{ + SolarMutexGuard aGuard; + if (pDocShell) + { + comphelper::ProfileZone aZone("calculate"); + pDocShell->DoRecalc(true); + } + else + { + OSL_FAIL("no DocShell"); //! throw exception? + } +} + +void SAL_CALL ScModelObj::calculateAll() +{ + SolarMutexGuard aGuard; + if (pDocShell) + { + comphelper::ProfileZone aZone("calculateAll"); + pDocShell->DoHardRecalc(); + } + else + { + OSL_FAIL("no DocShell"); //! throw exception? + } +} + +sal_Bool SAL_CALL ScModelObj::isAutomaticCalculationEnabled() +{ + SolarMutexGuard aGuard; + if (pDocShell) + return pDocShell->GetDocument().GetAutoCalc(); + + OSL_FAIL("no DocShell"); //! throw exception? + return false; +} + +void SAL_CALL ScModelObj::enableAutomaticCalculation( sal_Bool bEnabledIn ) +{ + bool bEnabled(bEnabledIn); + SolarMutexGuard aGuard; + if (pDocShell) + { + ScDocument& rDoc = pDocShell->GetDocument(); + if ( rDoc.GetAutoCalc() != bEnabled ) + { + rDoc.SetAutoCalc( bEnabled ); + pDocShell->SetDocumentModified(); + } + } + else + { + OSL_FAIL("no DocShell"); //! throw exception? + } +} + +// XProtectable + +void SAL_CALL ScModelObj::protect( const OUString& aPassword ) +{ + SolarMutexGuard aGuard; + // #i108245# if already protected, don't change anything + if ( pDocShell && !pDocShell->GetDocument().IsDocProtected() ) + { + pDocShell->GetDocFunc().Protect( TABLEID_DOC, aPassword ); + } +} + +void SAL_CALL ScModelObj::unprotect( const OUString& aPassword ) +{ + SolarMutexGuard aGuard; + if (pDocShell) + { + bool bDone = pDocShell->GetDocFunc().Unprotect( TABLEID_DOC, aPassword, true ); + if (!bDone) + throw lang::IllegalArgumentException(); + } +} + +sal_Bool SAL_CALL ScModelObj::isProtected() +{ + SolarMutexGuard aGuard; + if (pDocShell) + return pDocShell->GetDocument().IsDocProtected(); + + OSL_FAIL("no DocShell"); //! throw exception? + return false; +} + +// XDrawPagesSupplier + +uno::Reference<drawing::XDrawPages> SAL_CALL ScModelObj::getDrawPages() +{ + SolarMutexGuard aGuard; + if (pDocShell) + return new ScDrawPagesObj(pDocShell); + + OSL_FAIL("no DocShell"); //! throw exception? + return nullptr; +} + +// XGoalSeek + +sheet::GoalResult SAL_CALL ScModelObj::seekGoal( + const table::CellAddress& aFormulaPosition, + const table::CellAddress& aVariablePosition, + const OUString& aGoalValue ) +{ + SolarMutexGuard aGuard; + sheet::GoalResult aResult; + aResult.Divergence = DBL_MAX; // not found + if (pDocShell) + { + weld::WaitObject aWait( ScDocShell::GetActiveDialogParent() ); + ScDocument& rDoc = pDocShell->GetDocument(); + double fValue = 0.0; + bool bFound = rDoc.Solver( + static_cast<SCCOL>(aFormulaPosition.Column), static_cast<SCROW>(aFormulaPosition.Row), aFormulaPosition.Sheet, + static_cast<SCCOL>(aVariablePosition.Column), static_cast<SCROW>(aVariablePosition.Row), aVariablePosition.Sheet, + aGoalValue, fValue ); + aResult.Result = fValue; + if (bFound) + aResult.Divergence = 0.0; //! this is a lie + } + return aResult; +} + +// XConsolidatable + +uno::Reference<sheet::XConsolidationDescriptor> SAL_CALL ScModelObj::createConsolidationDescriptor( + sal_Bool bEmpty ) +{ + SolarMutexGuard aGuard; + rtl::Reference<ScConsolidationDescriptor> pNew = new ScConsolidationDescriptor; + if ( pDocShell && !bEmpty ) + { + ScDocument& rDoc = pDocShell->GetDocument(); + const ScConsolidateParam* pParam = rDoc.GetConsolidateDlgData(); + if (pParam) + pNew->SetParam( *pParam ); + } + return pNew; +} + +void SAL_CALL ScModelObj::consolidate( + const uno::Reference<sheet::XConsolidationDescriptor>& xDescriptor ) +{ + SolarMutexGuard aGuard; + // in theory, this could also be a different object, so use only + // public XConsolidationDescriptor interface to copy the data into + // ScConsolidationDescriptor object + //! but if this already is ScConsolidationDescriptor, do it directly via getImplementation? + + rtl::Reference< ScConsolidationDescriptor > xImpl(new ScConsolidationDescriptor); + xImpl->setFunction( xDescriptor->getFunction() ); + xImpl->setSources( xDescriptor->getSources() ); + xImpl->setStartOutputPosition( xDescriptor->getStartOutputPosition() ); + xImpl->setUseColumnHeaders( xDescriptor->getUseColumnHeaders() ); + xImpl->setUseRowHeaders( xDescriptor->getUseRowHeaders() ); + xImpl->setInsertLinks( xDescriptor->getInsertLinks() ); + + if (pDocShell) + { + const ScConsolidateParam& rParam = xImpl->GetParam(); + pDocShell->DoConsolidate( rParam ); + pDocShell->GetDocument().SetConsolidateDlgData( std::unique_ptr<ScConsolidateParam>(new ScConsolidateParam(rParam)) ); + } +} + +// XDocumentAuditing + +void SAL_CALL ScModelObj::refreshArrows() +{ + SolarMutexGuard aGuard; + if (pDocShell) + pDocShell->GetDocFunc().DetectiveRefresh(); +} + +// XViewDataSupplier +uno::Reference< container::XIndexAccess > SAL_CALL ScModelObj::getViewData( ) +{ + uno::Reference < container::XIndexAccess > xRet( SfxBaseModel::getViewData() ); + + if( !xRet.is() ) + { + SolarMutexGuard aGuard; + if (pDocShell && pDocShell->GetCreateMode() == SfxObjectCreateMode::EMBEDDED) + { + rtl::Reference< comphelper::IndexedPropertyValuesContainer > xCont = new comphelper::IndexedPropertyValuesContainer(); + xRet = xCont; + + OUString sName; + pDocShell->GetDocument().GetName( pDocShell->GetDocument().GetVisibleTab(), sName ); + SCCOL nPosLeft = pDocShell->GetDocument().GetPosLeft(); + SCROW nPosTop = pDocShell->GetDocument().GetPosTop(); + uno::Sequence< beans::PropertyValue > aSeq{ + comphelper::makePropertyValue(SC_ACTIVETABLE, sName), + comphelper::makePropertyValue(SC_POSITIONLEFT, nPosLeft), + comphelper::makePropertyValue(SC_POSITIONTOP, nPosTop) + }; + xCont->insertByIndex( 0, uno::Any( aSeq ) ); + } + } + + return xRet; +} + +// XPropertySet (Doc-Options) +//! provide them also to the application? + +uno::Reference<beans::XPropertySetInfo> SAL_CALL ScModelObj::getPropertySetInfo() +{ + SolarMutexGuard aGuard; + static uno::Reference<beans::XPropertySetInfo> aRef( + new SfxItemPropertySetInfo( aPropSet.getPropertyMap() )); + return aRef; +} + +void SAL_CALL ScModelObj::setPropertyValue( + const OUString& aPropertyName, const uno::Any& aValue ) +{ + SolarMutexGuard aGuard; + + if (!pDocShell) + return; + + ScDocument& rDoc = pDocShell->GetDocument(); + const ScDocOptions& rOldOpt = rDoc.GetDocOptions(); + ScDocOptions aNewOpt = rOldOpt; + // Don't recalculate while loading XML, when the formula text is stored + // Recalculation after loading is handled separately. + bool bHardRecalc = !rDoc.IsImportingXML(); + + bool bOpt = ScDocOptionsHelper::setPropertyValue( aNewOpt, aPropSet.getPropertyMap(), aPropertyName, aValue ); + if (bOpt) + { + // done... + if ( aPropertyName == SC_UNO_IGNORECASE || + aPropertyName == SC_UNONAME_REGEXP || + aPropertyName == SC_UNONAME_WILDCARDS || + aPropertyName == SC_UNO_LOOKUPLABELS ) + bHardRecalc = false; + } + else if ( aPropertyName == SC_UNONAME_CLOCAL ) + { + lang::Locale aLocale; + if ( aValue >>= aLocale ) + { + LanguageType eLatin, eCjk, eCtl; + rDoc.GetLanguage( eLatin, eCjk, eCtl ); + eLatin = ScUnoConversion::GetLanguage(aLocale); + rDoc.SetLanguage( eLatin, eCjk, eCtl ); + } + } + else if ( aPropertyName == SC_UNO_CODENAME ) + { + OUString sCodeName; + if ( aValue >>= sCodeName ) + rDoc.SetCodeName( sCodeName ); + } + else if ( aPropertyName == SC_UNO_CJK_CLOCAL ) + { + lang::Locale aLocale; + if ( aValue >>= aLocale ) + { + LanguageType eLatin, eCjk, eCtl; + rDoc.GetLanguage( eLatin, eCjk, eCtl ); + eCjk = ScUnoConversion::GetLanguage(aLocale); + rDoc.SetLanguage( eLatin, eCjk, eCtl ); + } + } + else if ( aPropertyName == SC_UNO_CTL_CLOCAL ) + { + lang::Locale aLocale; + if ( aValue >>= aLocale ) + { + LanguageType eLatin, eCjk, eCtl; + rDoc.GetLanguage( eLatin, eCjk, eCtl ); + eCtl = ScUnoConversion::GetLanguage(aLocale); + rDoc.SetLanguage( eLatin, eCjk, eCtl ); + } + } + else if ( aPropertyName == SC_UNO_APPLYFMDES ) + { + // model is created if not there + ScDrawLayer* pModel = pDocShell->MakeDrawLayer(); + pModel->SetOpenInDesignMode( ScUnoHelpFunctions::GetBoolFromAny( aValue ) ); + + SfxBindings* pBindings = pDocShell->GetViewBindings(); + if (pBindings) + pBindings->Invalidate( SID_FM_OPEN_READONLY ); + } + else if ( aPropertyName == SC_UNO_AUTOCONTFOC ) + { + // model is created if not there + ScDrawLayer* pModel = pDocShell->MakeDrawLayer(); + pModel->SetAutoControlFocus( ScUnoHelpFunctions::GetBoolFromAny( aValue ) ); + + SfxBindings* pBindings = pDocShell->GetViewBindings(); + if (pBindings) + pBindings->Invalidate( SID_FM_AUTOCONTROLFOCUS ); + } + else if ( aPropertyName == SC_UNO_ISLOADED ) + { + pDocShell->SetEmpty( !ScUnoHelpFunctions::GetBoolFromAny( aValue ) ); + } + else if ( aPropertyName == SC_UNO_ISUNDOENABLED ) + { + bool bUndoEnabled = ScUnoHelpFunctions::GetBoolFromAny( aValue ); + rDoc.EnableUndo( bUndoEnabled ); + pDocShell->GetUndoManager()->SetMaxUndoActionCount( + bUndoEnabled + ? officecfg::Office::Common::Undo::Steps::get() : 0); + } + else if ( aPropertyName == SC_UNO_RECORDCHANGES ) + { + bool bRecordChangesEnabled = ScUnoHelpFunctions::GetBoolFromAny( aValue ); + + bool bChangeAllowed = true; + if (!bRecordChangesEnabled) + bChangeAllowed = !pDocShell->HasChangeRecordProtection(); + + if (bChangeAllowed) + pDocShell->SetChangeRecording(bRecordChangesEnabled); + } + else if ( aPropertyName == SC_UNO_ISADJUSTHEIGHTENABLED ) + { + if( ScUnoHelpFunctions::GetBoolFromAny( aValue ) ) + rDoc.UnlockAdjustHeight(); + else + rDoc.LockAdjustHeight(); + } + else if ( aPropertyName == SC_UNO_ISEXECUTELINKENABLED ) + { + rDoc.EnableExecuteLink( ScUnoHelpFunctions::GetBoolFromAny( aValue ) ); + } + else if ( aPropertyName == SC_UNO_ISCHANGEREADONLYENABLED ) + { + rDoc.EnableChangeReadOnly( ScUnoHelpFunctions::GetBoolFromAny( aValue ) ); + } + else if ( aPropertyName == "BuildId" ) + { + aValue >>= maBuildId; + } + else if ( aPropertyName == "SavedObject" ) // set from chart after saving + { + OUString aObjName; + aValue >>= aObjName; + if ( !aObjName.isEmpty() ) + rDoc.RestoreChartListener( aObjName ); + } + else if ( aPropertyName == SC_UNO_INTEROPGRABBAG ) + { + setGrabBagItem(aValue); + } + + if ( aNewOpt != rOldOpt ) + { + rDoc.SetDocOptions( aNewOpt ); + //! Recalc only for options that need it? + if ( bHardRecalc ) + pDocShell->DoHardRecalc(); + pDocShell->SetDocumentModified(); + } +} + +uno::Any SAL_CALL ScModelObj::getPropertyValue( const OUString& aPropertyName ) +{ + SolarMutexGuard aGuard; + uno::Any aRet; + + if (pDocShell) + { + ScDocument& rDoc = pDocShell->GetDocument(); + const ScDocOptions& rOpt = rDoc.GetDocOptions(); + aRet = ScDocOptionsHelper::getPropertyValue( rOpt, aPropSet.getPropertyMap(), aPropertyName ); + if ( aRet.hasValue() ) + { + // done... + } + else if ( aPropertyName == SC_UNONAME_CLOCAL ) + { + LanguageType eLatin, eCjk, eCtl; + rDoc.GetLanguage( eLatin, eCjk, eCtl ); + + lang::Locale aLocale; + ScUnoConversion::FillLocale( aLocale, eLatin ); + aRet <<= aLocale; + } + else if ( aPropertyName == SC_UNO_CODENAME ) + { + aRet <<= rDoc.GetCodeName(); + } + + else if ( aPropertyName == SC_UNO_CJK_CLOCAL ) + { + LanguageType eLatin, eCjk, eCtl; + rDoc.GetLanguage( eLatin, eCjk, eCtl ); + + lang::Locale aLocale; + ScUnoConversion::FillLocale( aLocale, eCjk ); + aRet <<= aLocale; + } + else if ( aPropertyName == SC_UNO_CTL_CLOCAL ) + { + LanguageType eLatin, eCjk, eCtl; + rDoc.GetLanguage( eLatin, eCjk, eCtl ); + + lang::Locale aLocale; + ScUnoConversion::FillLocale( aLocale, eCtl ); + aRet <<= aLocale; + } + else if ( aPropertyName == SC_UNO_NAMEDRANGES ) + { + aRet <<= uno::Reference<sheet::XNamedRanges>(new ScGlobalNamedRangesObj( pDocShell )); + } + else if ( aPropertyName == SC_UNO_DATABASERNG ) + { + aRet <<= uno::Reference<sheet::XDatabaseRanges>(new ScDatabaseRangesObj( pDocShell )); + } + else if ( aPropertyName == SC_UNO_UNNAMEDDBRNG ) + { + aRet <<= uno::Reference<sheet::XUnnamedDatabaseRanges>(new ScUnnamedDatabaseRangesObj(pDocShell)); + } + else if ( aPropertyName == SC_UNO_COLLABELRNG ) + { + aRet <<= uno::Reference<sheet::XLabelRanges>(new ScLabelRangesObj( pDocShell, true )); + } + else if ( aPropertyName == SC_UNO_ROWLABELRNG ) + { + aRet <<= uno::Reference<sheet::XLabelRanges>(new ScLabelRangesObj( pDocShell, false )); + } + else if ( aPropertyName == SC_UNO_AREALINKS ) + { + aRet <<= uno::Reference<sheet::XAreaLinks>(new ScAreaLinksObj( pDocShell )); + } + else if ( aPropertyName == SC_UNO_DDELINKS ) + { + aRet <<= uno::Reference<container::XNameAccess>(new ScDDELinksObj( pDocShell )); + } + else if ( aPropertyName == SC_UNO_EXTERNALDOCLINKS ) + { + aRet <<= uno::Reference<sheet::XExternalDocLinks>(new ScExternalDocLinksObj(pDocShell)); + } + else if ( aPropertyName == SC_UNO_SHEETLINKS ) + { + aRet <<= uno::Reference<container::XNameAccess>(new ScSheetLinksObj( pDocShell )); + } + else if ( aPropertyName == SC_UNO_APPLYFMDES ) + { + // default for no model is TRUE + ScDrawLayer* pModel = rDoc.GetDrawLayer(); + bool bOpenInDesign = pModel == nullptr || pModel->GetOpenInDesignMode(); + aRet <<= bOpenInDesign; + } + else if ( aPropertyName == SC_UNO_AUTOCONTFOC ) + { + // default for no model is FALSE + ScDrawLayer* pModel = rDoc.GetDrawLayer(); + bool bAutoControlFocus = pModel && pModel->GetAutoControlFocus(); + aRet <<= bAutoControlFocus; + } + else if ( aPropertyName == SC_UNO_FORBIDDEN ) + { + aRet <<= uno::Reference<i18n::XForbiddenCharacters>(new ScForbiddenCharsObj( pDocShell )); + } + else if ( aPropertyName == SC_UNO_HASDRAWPAGES ) + { + aRet <<= (pDocShell->GetDocument().GetDrawLayer() != nullptr); + } + else if ( aPropertyName == SC_UNO_BASICLIBRARIES ) + { + aRet <<= pDocShell->GetBasicContainer(); + } + else if ( aPropertyName == SC_UNO_DIALOGLIBRARIES ) + { + aRet <<= pDocShell->GetDialogContainer(); + } + else if ( aPropertyName == SC_UNO_VBAGLOBNAME ) + { + /* #i111553# This property provides the name of the constant that + will be used to store this model in the global Basic manager. + That constant will be equivalent to 'ThisComponent' but for + each application, so e.g. a 'ThisExcelDoc' and a 'ThisWordDoc' + constant can co-exist, as required by VBA. */ + aRet <<= OUString( "ThisExcelDoc" ); + } + else if ( aPropertyName == SC_UNO_RUNTIMEUID ) + { + aRet <<= getRuntimeUID(); + } + else if ( aPropertyName == SC_UNO_HASVALIDSIGNATURES ) + { + aRet <<= hasValidSignatures(); + } + else if ( aPropertyName == SC_UNO_ISLOADED ) + { + aRet <<= !pDocShell->IsEmpty(); + } + else if ( aPropertyName == SC_UNO_ISUNDOENABLED ) + { + aRet <<= rDoc.IsUndoEnabled(); + } + else if ( aPropertyName == SC_UNO_RECORDCHANGES ) + { + aRet <<= pDocShell->IsChangeRecording(); + } + else if ( aPropertyName == SC_UNO_ISRECORDCHANGESPROTECTED ) + { + aRet <<= pDocShell->HasChangeRecordProtection(); + } + else if ( aPropertyName == SC_UNO_ISADJUSTHEIGHTENABLED ) + { + aRet <<= !( rDoc.IsAdjustHeightLocked() ); + } + else if ( aPropertyName == SC_UNO_ISEXECUTELINKENABLED ) + { + aRet <<= rDoc.IsExecuteLinkEnabled(); + } + else if ( aPropertyName == SC_UNO_ISCHANGEREADONLYENABLED ) + { + aRet <<= rDoc.IsChangeReadOnlyEnabled(); + } + else if ( aPropertyName == SC_UNO_REFERENCEDEVICE ) + { + rtl::Reference<VCLXDevice> pXDev = new VCLXDevice(); + pXDev->SetOutputDevice( rDoc.GetRefDevice() ); + aRet <<= uno::Reference< awt::XDevice >( pXDev ); + } + else if ( aPropertyName == "BuildId" ) + { + aRet <<= maBuildId; + } + else if ( aPropertyName == "InternalDocument" ) + { + aRet <<= (pDocShell->GetCreateMode() == SfxObjectCreateMode::INTERNAL); + } + else if ( aPropertyName == SC_UNO_INTEROPGRABBAG ) + { + getGrabBagItem(aRet); + } + } + + return aRet; +} + +SC_IMPL_DUMMY_PROPERTY_LISTENER( ScModelObj ) + +// XMultiServiceFactory + +css::uno::Reference<css::uno::XInterface> ScModelObj::create( + OUString const & aServiceSpecifier, + css::uno::Sequence<css::uno::Any> const * arguments) +{ + using ServiceType = ScServiceProvider::Type; + + uno::Reference<uno::XInterface> xRet; + ServiceType nType = ScServiceProvider::GetProviderType(aServiceSpecifier); + if ( nType != ServiceType::INVALID ) + { + // drawing layer tables must be kept as long as the model is alive + // return stored instance if already set + switch ( nType ) + { + case ServiceType::GRADTAB: xRet.set(xDrawGradTab); break; + case ServiceType::HATCHTAB: xRet.set(xDrawHatchTab); break; + case ServiceType::BITMAPTAB: xRet.set(xDrawBitmapTab); break; + case ServiceType::TRGRADTAB: xRet.set(xDrawTrGradTab); break; + case ServiceType::MARKERTAB: xRet.set(xDrawMarkerTab); break; + case ServiceType::DASHTAB: xRet.set(xDrawDashTab); break; + case ServiceType::CHDATAPROV: xRet.set(xChartDataProv); break; + case ServiceType::VBAOBJECTPROVIDER: xRet.set(xObjProvider); break; + default: break; + } + + // #i64497# If a chart is in a temporary document during clipboard paste, + // there should be no data provider, so that own data is used + bool bCreate = + ( nType != ServiceType::CHDATAPROV || + ( pDocShell->GetCreateMode() != SfxObjectCreateMode::INTERNAL )); + // this should never happen, i.e. the temporary document should never be + // loaded, because this unlinks the data + assert(bCreate); + + if ( !xRet.is() && bCreate ) + { + xRet.set(ScServiceProvider::MakeInstance( nType, pDocShell )); + + // store created instance + switch ( nType ) + { + case ServiceType::GRADTAB: xDrawGradTab.set(xRet); break; + case ServiceType::HATCHTAB: xDrawHatchTab.set(xRet); break; + case ServiceType::BITMAPTAB: xDrawBitmapTab.set(xRet); break; + case ServiceType::TRGRADTAB: xDrawTrGradTab.set(xRet); break; + case ServiceType::MARKERTAB: xDrawMarkerTab.set(xRet); break; + case ServiceType::DASHTAB: xDrawDashTab.set(xRet); break; + case ServiceType::CHDATAPROV: xChartDataProv.set(xRet); break; + case ServiceType::VBAOBJECTPROVIDER: xObjProvider.set(xRet); break; + default: break; + } + } + } + else + { + // we offload everything we don't know to SvxFmMSFactory, + // it'll throw exception if this isn't okay ... + + try + { + xRet = arguments == nullptr + ? SvxFmMSFactory::createInstance(aServiceSpecifier) + : SvxFmMSFactory::createInstanceWithArguments( + aServiceSpecifier, *arguments); + // extra block to force deletion of the temporary before ScShapeObj ctor (setDelegator) + } + catch ( lang::ServiceNotRegisteredException & ) + { + } + + // if the drawing factory created a shape, a ScShapeObj has to be used + // to support own properties like ImageMap: + + uno::Reference<drawing::XShape> xShape( xRet, uno::UNO_QUERY ); + if ( xShape.is() ) + { + xRet.clear(); // for aggregation, xShape must be the object's only ref + new ScShapeObj( xShape ); // aggregates object and modifies xShape + xRet.set(xShape); + } + } + return xRet; +} + +uno::Reference<uno::XInterface> SAL_CALL ScModelObj::createInstance( + const OUString& aServiceSpecifier ) +{ + SolarMutexGuard aGuard; + return create(aServiceSpecifier, nullptr); +} + +uno::Reference<uno::XInterface> SAL_CALL ScModelObj::createInstanceWithArguments( + const OUString& ServiceSpecifier, + const uno::Sequence<uno::Any>& aArgs ) +{ + //! distinguish between own services and those of drawing layer? + + SolarMutexGuard aGuard; + uno::Reference<uno::XInterface> xInt(create(ServiceSpecifier, &aArgs)); + + if ( aArgs.hasElements() ) + { + // used only for cell value binding so far - it can be initialized after creating + + uno::Reference<lang::XInitialization> xInit( xInt, uno::UNO_QUERY ); + if ( xInit.is() ) + xInit->initialize( aArgs ); + } + + return xInt; +} + +uno::Sequence<OUString> SAL_CALL ScModelObj::getAvailableServiceNames() +{ + SolarMutexGuard aGuard; + + return comphelper::concatSequences( ScServiceProvider::GetAllServiceNames(), + SvxFmMSFactory::getAvailableServiceNames() ); +} + +// XServiceInfo +OUString SAL_CALL ScModelObj::getImplementationName() +{ + return "ScModelObj"; + /* // Matching the .component information: + return OUString( "com.sun.star.comp.Calc.SpreadsheetDocument" ); + */ +} + +sal_Bool SAL_CALL ScModelObj::supportsService( const OUString& rServiceName ) +{ + return cppu::supportsService(this, rServiceName); +} + +uno::Sequence<OUString> SAL_CALL ScModelObj::getSupportedServiceNames() +{ + return {SCMODELOBJ_SERVICE, SCDOCSETTINGS_SERVICE, SCDOC_SERVICE}; +} + +// XUnoTunnel + +sal_Int64 SAL_CALL ScModelObj::getSomething( + const uno::Sequence<sal_Int8 >& rId ) +{ + if ( comphelper::isUnoTunnelId<ScModelObj>(rId) ) + { + return comphelper::getSomething_cast(this); + } + + if ( comphelper::isUnoTunnelId<SfxObjectShell>(rId) ) + { + return comphelper::getSomething_cast(pDocShell); + } + + // aggregated number formats supplier has XUnoTunnel, too + // interface from aggregated object must be obtained via queryAggregation + + sal_Int64 nRet = SfxBaseModel::getSomething( rId ); + if ( nRet ) + return nRet; + + if ( GetFormatter().is() ) + { + const uno::Type& rTunnelType = cppu::UnoType<lang::XUnoTunnel>::get(); + uno::Any aNumTunnel(xNumberAgg->queryAggregation(rTunnelType)); + if(auto xTunnelAgg = o3tl::tryAccess<uno::Reference<lang::XUnoTunnel>>( + aNumTunnel)) + { + return (*xTunnelAgg)->getSomething( rId ); + } + } + + return 0; +} + +const uno::Sequence<sal_Int8>& ScModelObj::getUnoTunnelId() +{ + static const comphelper::UnoIdInit theScModelObjUnoTunnelId; + return theScModelObjUnoTunnelId.getSeq(); +} + +// XChangesNotifier + +void ScModelObj::addChangesListener( const uno::Reference< util::XChangesListener >& aListener ) +{ + SolarMutexGuard aGuard; + maChangesListeners.addInterface( aListener ); +} + +void ScModelObj::removeChangesListener( const uno::Reference< util::XChangesListener >& aListener ) +{ + SolarMutexGuard aGuard; + maChangesListeners.removeInterface( aListener ); +} + +bool ScModelObj::HasChangesListeners() const +{ + if ( maChangesListeners.getLength() > 0 ) + return true; + + // "change" event set in any sheet? + return pDocShell && pDocShell->GetDocument().HasAnySheetEventScript(ScSheetEventId::CHANGE); +} + +void ScModelObj::NotifyChanges( const OUString& rOperation, const ScRangeList& rRanges, + const uno::Sequence< beans::PropertyValue >& rProperties ) +{ + if ( pDocShell && HasChangesListeners() ) + { + util::ChangesEvent aEvent; + aEvent.Source.set( static_cast< cppu::OWeakObject* >( this ) ); + aEvent.Base <<= aEvent.Source; + + size_t nRangeCount = rRanges.size(); + aEvent.Changes.realloc( static_cast< sal_Int32 >( nRangeCount ) ); + auto pChanges = aEvent.Changes.getArray(); + for ( size_t nIndex = 0; nIndex < nRangeCount; ++nIndex ) + { + uno::Reference< table::XCellRange > xRangeObj; + + ScRange const & rRange = rRanges[ nIndex ]; + if ( rRange.aStart == rRange.aEnd ) + { + xRangeObj.set( new ScCellObj( pDocShell, rRange.aStart ) ); + } + else + { + xRangeObj.set( new ScCellRangeObj( pDocShell, rRange ) ); + } + + util::ElementChange& rChange = pChanges[ static_cast< sal_Int32 >( nIndex ) ]; + rChange.Accessor <<= rOperation; + rChange.Element <<= rProperties; + rChange.ReplacedElement <<= xRangeObj; + } + + ::comphelper::OInterfaceIteratorHelper3 aIter( maChangesListeners ); + while ( aIter.hasMoreElements() ) + { + try + { + aIter.next()->changesOccurred( aEvent ); + } + catch( uno::Exception& ) + { + } + } + } + + // handle sheet events + //! separate method with ScMarkData? Then change HasChangesListeners back. + if ( !(rOperation == "cell-change" && pDocShell) ) + return; + + ScMarkData aMarkData(pDocShell->GetDocument().GetSheetLimits()); + aMarkData.MarkFromRangeList( rRanges, false ); + ScDocument& rDoc = pDocShell->GetDocument(); + SCTAB nTabCount = rDoc.GetTableCount(); + for (const SCTAB& nTab : aMarkData) + { + if (nTab >= nTabCount) + break; + const ScSheetEvents* pEvents = rDoc.GetSheetEvents(nTab); + if (pEvents) + { + const OUString* pScript = pEvents->GetScript(ScSheetEventId::CHANGE); + if (pScript) + { + ScRangeList aTabRanges; // collect ranges on this sheet + size_t nRangeCount = rRanges.size(); + for ( size_t nIndex = 0; nIndex < nRangeCount; ++nIndex ) + { + ScRange const & rRange = rRanges[ nIndex ]; + if ( rRange.aStart.Tab() == nTab ) + aTabRanges.push_back( rRange ); + } + size_t nTabRangeCount = aTabRanges.size(); + if ( nTabRangeCount > 0 ) + { + uno::Reference<uno::XInterface> xTarget; + if ( nTabRangeCount == 1 ) + { + ScRange const & rRange = aTabRanges[ 0 ]; + if ( rRange.aStart == rRange.aEnd ) + xTarget.set( static_cast<cppu::OWeakObject*>( new ScCellObj( pDocShell, rRange.aStart ) ) ); + else + xTarget.set( static_cast<cppu::OWeakObject*>( new ScCellRangeObj( pDocShell, rRange ) ) ); + } + else + xTarget.set( static_cast<cppu::OWeakObject*>( new ScCellRangesObj( pDocShell, aTabRanges ) ) ); + + uno::Sequence<uno::Any> aParams{ uno::Any(xTarget) }; + + uno::Any aRet; + uno::Sequence<sal_Int16> aOutArgsIndex; + uno::Sequence<uno::Any> aOutArgs; + + /*ErrCode eRet =*/ pDocShell->CallXScript( *pScript, aParams, aRet, aOutArgsIndex, aOutArgs ); + } + } + } + } +} + +void ScModelObj::HandleCalculateEvents() +{ + if (!pDocShell) + return; + + ScDocument& rDoc = pDocShell->GetDocument(); + // don't call events before the document is visible + // (might also set a flag on SfxEventHintId::LoadFinished and only disable while loading) + if ( rDoc.IsDocVisible() ) + { + SCTAB nTabCount = rDoc.GetTableCount(); + for (SCTAB nTab = 0; nTab < nTabCount; nTab++) + { + if (rDoc.HasCalcNotification(nTab)) + { + if (const ScSheetEvents* pEvents = rDoc.GetSheetEvents( nTab )) + { + if (const OUString* pScript = pEvents->GetScript(ScSheetEventId::CALCULATE)) + { + uno::Any aRet; + uno::Sequence<uno::Any> aParams; + uno::Sequence<sal_Int16> aOutArgsIndex; + uno::Sequence<uno::Any> aOutArgs; + pDocShell->CallXScript( *pScript, aParams, aRet, aOutArgsIndex, aOutArgs ); + } + } + + try + { + uno::Reference< script::vba::XVBAEventProcessor > xVbaEvents( rDoc.GetVbaEventProcessor(), uno::UNO_SET_THROW ); + uno::Sequence< uno::Any > aArgs{ uno::Any(nTab) }; + xVbaEvents->processVbaEvent( ScSheetEvents::GetVbaSheetEventId( ScSheetEventId::CALCULATE ), aArgs ); + } + catch( uno::Exception& ) + { + } + } + } + } + rDoc.ResetCalcNotifications(); +} + +// XOpenCLSelection + +sal_Bool ScModelObj::isOpenCLEnabled() +{ + return ScCalcConfig::isOpenCLEnabled(); +} + +void ScModelObj::enableOpenCL(sal_Bool bEnable) +{ + if (ScCalcConfig::isOpenCLEnabled() == static_cast<bool>(bEnable)) + return; + if (ScCalcConfig::getForceCalculationType() != ForceCalculationNone) + return; + + std::shared_ptr<comphelper::ConfigurationChanges> batch(comphelper::ConfigurationChanges::create()); + officecfg::Office::Common::Misc::UseOpenCL::set(bEnable, batch); + batch->commit(); + + ScCalcConfig aConfig = ScInterpreter::GetGlobalConfig(); + if (bEnable) + aConfig.setOpenCLConfigToDefault(); + ScInterpreter::SetGlobalConfig(aConfig); + +#if HAVE_FEATURE_OPENCL + sc::FormulaGroupInterpreter::switchOpenCLDevice(OUString(), true); +#endif + + ScDocument* pDoc = GetDocument(); + pDoc->CheckVectorizationState(); + +} + +void ScModelObj::enableAutomaticDeviceSelection(sal_Bool bForce) +{ + ScCalcConfig aConfig = ScInterpreter::GetGlobalConfig(); + aConfig.mbOpenCLAutoSelect = true; + ScInterpreter::SetGlobalConfig(aConfig); + ScFormulaOptions aOptions = SC_MOD()->GetFormulaOptions(); + aOptions.SetCalcConfig(aConfig); + SC_MOD()->SetFormulaOptions(aOptions); +#if !HAVE_FEATURE_OPENCL + (void) bForce; +#else + sc::FormulaGroupInterpreter::switchOpenCLDevice(OUString(), true, bForce); +#endif +} + +void ScModelObj::disableAutomaticDeviceSelection() +{ + ScCalcConfig aConfig = ScInterpreter::GetGlobalConfig(); + aConfig.mbOpenCLAutoSelect = false; + ScInterpreter::SetGlobalConfig(aConfig); + ScFormulaOptions aOptions = SC_MOD()->GetFormulaOptions(); + aOptions.SetCalcConfig(aConfig); + SC_MOD()->SetFormulaOptions(aOptions); +} + +void ScModelObj::selectOpenCLDevice( sal_Int32 nPlatform, sal_Int32 nDevice ) +{ + if(nPlatform < 0 || nDevice < 0) + throw uno::RuntimeException(); + +#if !HAVE_FEATURE_OPENCL + throw uno::RuntimeException(); +#else + std::vector<OpenCLPlatformInfo> aPlatformInfo; + sc::FormulaGroupInterpreter::fillOpenCLInfo(aPlatformInfo); + if(o3tl::make_unsigned(nPlatform) >= aPlatformInfo.size()) + throw uno::RuntimeException(); + + if(o3tl::make_unsigned(nDevice) >= aPlatformInfo[nPlatform].maDevices.size()) + throw uno::RuntimeException(); + + OUString aDeviceString = aPlatformInfo[nPlatform].maVendor + " " + aPlatformInfo[nPlatform].maDevices[nDevice].maName; + sc::FormulaGroupInterpreter::switchOpenCLDevice(aDeviceString, false); +#endif +} + +sal_Int32 ScModelObj::getPlatformID() +{ +#if !HAVE_FEATURE_OPENCL + return -1; +#else + sal_Int32 nPlatformId; + sal_Int32 nDeviceId; + sc::FormulaGroupInterpreter::getOpenCLDeviceInfo(nDeviceId, nPlatformId); + return nPlatformId; +#endif +} + +sal_Int32 ScModelObj::getDeviceID() +{ +#if !HAVE_FEATURE_OPENCL + return -1; +#else + sal_Int32 nPlatformId; + sal_Int32 nDeviceId; + sc::FormulaGroupInterpreter::getOpenCLDeviceInfo(nDeviceId, nPlatformId); + return nDeviceId; +#endif +} + +uno::Sequence< sheet::opencl::OpenCLPlatform > ScModelObj::getOpenCLPlatforms() +{ +#if !HAVE_FEATURE_OPENCL + return uno::Sequence<sheet::opencl::OpenCLPlatform>(); +#else + std::vector<OpenCLPlatformInfo> aPlatformInfo; + sc::FormulaGroupInterpreter::fillOpenCLInfo(aPlatformInfo); + + uno::Sequence<sheet::opencl::OpenCLPlatform> aRet(aPlatformInfo.size()); + auto aRetRange = asNonConstRange(aRet); + for(size_t i = 0; i < aPlatformInfo.size(); ++i) + { + aRetRange[i].Name = aPlatformInfo[i].maName; + aRetRange[i].Vendor = aPlatformInfo[i].maVendor; + + aRetRange[i].Devices.realloc(aPlatformInfo[i].maDevices.size()); + auto pDevices = aRetRange[i].Devices.getArray(); + for(size_t j = 0; j < aPlatformInfo[i].maDevices.size(); ++j) + { + const OpenCLDeviceInfo& rDevice = aPlatformInfo[i].maDevices[j]; + pDevices[j].Name = rDevice.maName; + pDevices[j].Vendor = rDevice.maVendor; + pDevices[j].Driver = rDevice.maDriver; + } + } + + return aRet; +#endif +} + +namespace { + +/// @throws css::uno::RuntimeException +void setOpcodeSubsetTest(bool bFlag) +{ + std::shared_ptr<comphelper::ConfigurationChanges> batch(comphelper::ConfigurationChanges::create()); + officecfg::Office::Calc::Formula::Calculation::OpenCLSubsetOnly::set(bFlag, batch); + batch->commit(); +} + +} + +void ScModelObj::enableOpcodeSubsetTest() +{ + setOpcodeSubsetTest(true); +} + +void ScModelObj::disableOpcodeSubsetTest() +{ + setOpcodeSubsetTest(false); +} + +sal_Bool ScModelObj::isOpcodeSubsetTested() +{ + return officecfg::Office::Calc::Formula::Calculation::OpenCLSubsetOnly::get(); +} + +void ScModelObj::setFormulaCellNumberLimit( sal_Int32 number ) +{ + std::shared_ptr<comphelper::ConfigurationChanges> batch(comphelper::ConfigurationChanges::create()); + officecfg::Office::Calc::Formula::Calculation::OpenCLMinimumDataSize::set(number, batch); + batch->commit(); +} + +sal_Int32 ScModelObj::getFormulaCellNumberLimit() +{ + return officecfg::Office::Calc::Formula::Calculation::OpenCLMinimumDataSize::get(); +} + +ScDrawPagesObj::ScDrawPagesObj(ScDocShell* pDocSh) : + pDocShell( pDocSh ) +{ + pDocShell->GetDocument().AddUnoObject(*this); +} + +ScDrawPagesObj::~ScDrawPagesObj() +{ + SolarMutexGuard g; + + if (pDocShell) + pDocShell->GetDocument().RemoveUnoObject(*this); +} + +void ScDrawPagesObj::Notify( SfxBroadcaster&, const SfxHint& rHint ) +{ + // we don't care about update of references here + + if ( rHint.GetId() == SfxHintId::Dying ) + { + pDocShell = nullptr; // became invalid + } +} + +uno::Reference<drawing::XDrawPage> ScDrawPagesObj::GetObjectByIndex_Impl(sal_Int32 nIndex) const +{ + if (pDocShell) + { + ScDrawLayer* pDrawLayer = pDocShell->MakeDrawLayer(); + OSL_ENSURE(pDrawLayer,"Cannot create Draw-Layer"); + if ( pDrawLayer && nIndex >= 0 && nIndex < pDocShell->GetDocument().GetTableCount() ) + { + SdrPage* pPage = pDrawLayer->GetPage(static_cast<sal_uInt16>(nIndex)); + OSL_ENSURE(pPage,"Draw-Page not found"); + if (pPage) + { + return uno::Reference<drawing::XDrawPage> (pPage->getUnoPage(), uno::UNO_QUERY); + } + } + } + return nullptr; +} + +// XDrawPages + +uno::Reference<drawing::XDrawPage> SAL_CALL ScDrawPagesObj::insertNewByIndex( sal_Int32 nPos ) +{ + SolarMutexGuard aGuard; + uno::Reference<drawing::XDrawPage> xRet; + if (pDocShell) + { + OUString aNewName; + pDocShell->GetDocument().CreateValidTabName(aNewName); + if ( pDocShell->GetDocFunc().InsertTable( static_cast<SCTAB>(nPos), + aNewName, true, true ) ) + xRet.set(GetObjectByIndex_Impl( nPos )); + } + return xRet; +} + +void SAL_CALL ScDrawPagesObj::remove( const uno::Reference<drawing::XDrawPage>& xPage ) +{ + SolarMutexGuard aGuard; + SvxDrawPage* pImp = comphelper::getFromUnoTunnel<SvxDrawPage>( xPage ); + if ( pDocShell && pImp ) + { + SdrPage* pPage = pImp->GetSdrPage(); + if (pPage) + { + SCTAB nPageNum = static_cast<SCTAB>(pPage->GetPageNum()); + pDocShell->GetDocFunc().DeleteTable( nPageNum, true ); + } + } +} + +// XIndexAccess + +sal_Int32 SAL_CALL ScDrawPagesObj::getCount() +{ + SolarMutexGuard aGuard; + if (pDocShell) + return pDocShell->GetDocument().GetTableCount(); + return 0; +} + +uno::Any SAL_CALL ScDrawPagesObj::getByIndex( sal_Int32 nIndex ) +{ + SolarMutexGuard aGuard; + uno::Reference<drawing::XDrawPage> xPage(GetObjectByIndex_Impl(nIndex)); + if (!xPage.is()) + throw lang::IndexOutOfBoundsException(); + + return uno::Any(xPage); +} + +uno::Type SAL_CALL ScDrawPagesObj::getElementType() +{ + return cppu::UnoType<drawing::XDrawPage>::get(); +} + +sal_Bool SAL_CALL ScDrawPagesObj::hasElements() +{ + SolarMutexGuard aGuard; + return ( getCount() != 0 ); +} + +ScTableSheetsObj::ScTableSheetsObj(ScDocShell* pDocSh) : + pDocShell( pDocSh ) +{ + pDocShell->GetDocument().AddUnoObject(*this); +} + +ScTableSheetsObj::~ScTableSheetsObj() +{ + SolarMutexGuard g; + + if (pDocShell) + pDocShell->GetDocument().RemoveUnoObject(*this); +} + +void ScTableSheetsObj::Notify( SfxBroadcaster&, const SfxHint& rHint ) +{ + // we don't care about update of references here + + if ( rHint.GetId() == SfxHintId::Dying ) + { + pDocShell = nullptr; // became invalid + } +} + +// XSpreadsheets + +rtl::Reference<ScTableSheetObj> ScTableSheetsObj::GetObjectByIndex_Impl(sal_Int32 nIndex) const +{ + if ( pDocShell && nIndex >= 0 && nIndex < pDocShell->GetDocument().GetTableCount() ) + return new ScTableSheetObj( pDocShell, static_cast<SCTAB>(nIndex) ); + + return nullptr; +} + +rtl::Reference<ScTableSheetObj> ScTableSheetsObj::GetObjectByName_Impl(const OUString& aName) const +{ + if (pDocShell) + { + SCTAB nIndex; + if ( pDocShell->GetDocument().GetTable( aName, nIndex ) ) + return new ScTableSheetObj( pDocShell, nIndex ); + } + return nullptr; +} + +void SAL_CALL ScTableSheetsObj::insertNewByName( const OUString& aName, sal_Int16 nPosition ) +{ + SolarMutexGuard aGuard; + bool bDone = false; + if (pDocShell) + { + bDone = pDocShell->GetDocFunc().InsertTable( nPosition, aName, true, true ); + } + if (!bDone) + throw uno::RuntimeException(); // no other exceptions specified +} + +void SAL_CALL ScTableSheetsObj::moveByName( const OUString& aName, sal_Int16 nDestination ) +{ + SolarMutexGuard aGuard; + bool bDone = false; + if (pDocShell) + { + SCTAB nSource; + if ( pDocShell->GetDocument().GetTable( aName, nSource ) ) + bDone = pDocShell->MoveTable( nSource, nDestination, false, true ); + } + if (!bDone) + throw uno::RuntimeException(); // no other exceptions specified +} + +void SAL_CALL ScTableSheetsObj::copyByName( const OUString& aName, + const OUString& aCopy, sal_Int16 nDestination ) +{ + SolarMutexGuard aGuard; + bool bDone = false; + if (pDocShell) + { + SCTAB nSource; + if ( pDocShell->GetDocument().GetTable( aName, nSource ) ) + { + bDone = pDocShell->MoveTable( nSource, nDestination, true, true ); + if (bDone) + { + // #i92477# any index past the last sheet means "append" in MoveTable + SCTAB nResultTab = static_cast<SCTAB>(nDestination); + SCTAB nTabCount = pDocShell->GetDocument().GetTableCount(); // count after copying + if (nResultTab >= nTabCount) + nResultTab = nTabCount - 1; + + bDone = pDocShell->GetDocFunc().RenameTable( nResultTab, aCopy, + true, true ); + } + } + } + if (!bDone) + throw uno::RuntimeException(); // no other exceptions specified +} + +void SAL_CALL ScTableSheetsObj::insertByName( const OUString& aName, const uno::Any& aElement ) +{ + SolarMutexGuard aGuard; + bool bDone = false; + bool bIllArg = false; + + //! Type of aElement can be some specific interface instead of XInterface + + if ( pDocShell ) + { + uno::Reference<uno::XInterface> xInterface(aElement, uno::UNO_QUERY); + if ( xInterface.is() ) + { + ScTableSheetObj* pSheetObj = comphelper::getFromUnoTunnel<ScTableSheetObj>( xInterface ); + if ( pSheetObj && !pSheetObj->GetDocShell() ) // not inserted yet? + { + ScDocument& rDoc = pDocShell->GetDocument(); + SCTAB nDummy; + if ( rDoc.GetTable( aName, nDummy ) ) + { + // name already exists + throw container::ElementExistException(); + } + SCTAB nPosition = rDoc.GetTableCount(); + bDone = pDocShell->GetDocFunc().InsertTable( nPosition, aName, + true, true ); + if (bDone) + pSheetObj->InitInsertSheet( pDocShell, nPosition ); + // set document and new range in the object + } + else + bIllArg = true; + } + else + bIllArg = true; + } + + if (!bDone) + { + if (bIllArg) + throw lang::IllegalArgumentException(); + else + throw uno::RuntimeException(); // ElementExistException is handled above + } +} + +void SAL_CALL ScTableSheetsObj::replaceByName( const OUString& aName, const uno::Any& aElement ) +{ + SolarMutexGuard aGuard; + bool bDone = false; + bool bIllArg = false; + + //! Type of aElement can be some specific interface instead of XInterface + + if ( pDocShell ) + { + uno::Reference<uno::XInterface> xInterface(aElement, uno::UNO_QUERY); + if ( xInterface.is() ) + { + ScTableSheetObj* pSheetObj = comphelper::getFromUnoTunnel<ScTableSheetObj>( xInterface ); + if ( pSheetObj && !pSheetObj->GetDocShell() ) // not inserted yet? + { + SCTAB nPosition; + if ( !pDocShell->GetDocument().GetTable( aName, nPosition ) ) + { + // not found + throw container::NoSuchElementException(); + } + + if ( pDocShell->GetDocFunc().DeleteTable( nPosition, true ) ) + { + // InsertTable can't really go wrong now + bDone = pDocShell->GetDocFunc().InsertTable( nPosition, aName, true, true ); + if (bDone) + pSheetObj->InitInsertSheet( pDocShell, nPosition ); + } + + } + else + bIllArg = true; + } + else + bIllArg = true; + } + + if (!bDone) + { + if (bIllArg) + throw lang::IllegalArgumentException(); + else + throw uno::RuntimeException(); // NoSuchElementException is handled above + } +} + +void SAL_CALL ScTableSheetsObj::removeByName( const OUString& aName ) +{ + SolarMutexGuard aGuard; + bool bDone = false; + if (pDocShell) + { + SCTAB nIndex; + if ( !pDocShell->GetDocument().GetTable( aName, nIndex ) ) + throw container::NoSuchElementException(); // not found + bDone = pDocShell->GetDocFunc().DeleteTable( nIndex, true ); + } + + if (!bDone) + throw uno::RuntimeException(); // NoSuchElementException is handled above +} + +sal_Int32 ScTableSheetsObj::importSheet( + const uno::Reference < sheet::XSpreadsheetDocument > & xDocSrc, + const OUString& srcName, const sal_Int32 nDestPosition ) +{ + //pDocShell is the destination + ScDocument& rDocDest = pDocShell->GetDocument(); + + // Source document docShell + if ( !xDocSrc.is() ) + throw uno::RuntimeException(); + ScModelObj* pObj = comphelper::getFromUnoTunnel<ScModelObj>(xDocSrc); + ScDocShell* pDocShellSrc = static_cast<ScDocShell*>(pObj->GetEmbeddedObject()); + + // SourceSheet Position and does srcName exists ? + SCTAB nIndexSrc; + if ( !pDocShellSrc->GetDocument().GetTable( srcName, nIndexSrc ) ) + throw lang::IllegalArgumentException(); + + // Check the validity of destination index. + SCTAB nCount = rDocDest.GetTableCount(); + SCTAB nIndexDest = static_cast<SCTAB>(nDestPosition); + if (nIndexDest > nCount || nIndexDest < 0) + throw lang::IndexOutOfBoundsException(); + + // Transfer Tab + pDocShell->TransferTab( + *pDocShellSrc, nIndexSrc, nIndexDest, true/*bInsertNew*/, true/*bNotifyAndPaint*/ ); + + return nIndexDest; +} + +// XCellRangesAccess + +uno::Reference< table::XCell > SAL_CALL ScTableSheetsObj::getCellByPosition( sal_Int32 nColumn, sal_Int32 nRow, sal_Int32 nSheet ) +{ + SolarMutexGuard aGuard; + rtl::Reference<ScTableSheetObj> xSheet = GetObjectByIndex_Impl(static_cast<sal_uInt16>(nSheet)); + if (! xSheet.is()) + throw lang::IndexOutOfBoundsException(); + + return xSheet->getCellByPosition(nColumn, nRow); +} + +uno::Reference< table::XCellRange > SAL_CALL ScTableSheetsObj::getCellRangeByPosition( sal_Int32 nLeft, sal_Int32 nTop, sal_Int32 nRight, sal_Int32 nBottom, sal_Int32 nSheet ) +{ + SolarMutexGuard aGuard; + rtl::Reference<ScTableSheetObj> xSheet = GetObjectByIndex_Impl(static_cast<sal_uInt16>(nSheet)); + if (! xSheet.is()) + throw lang::IndexOutOfBoundsException(); + + return xSheet->getCellRangeByPosition(nLeft, nTop, nRight, nBottom); +} + +uno::Sequence < uno::Reference< table::XCellRange > > SAL_CALL ScTableSheetsObj::getCellRangesByName( const OUString& aRange ) +{ + SolarMutexGuard aGuard; + uno::Sequence < uno::Reference < table::XCellRange > > xRet; + + ScRangeList aRangeList; + ScDocument& rDoc = pDocShell->GetDocument(); + if (!ScRangeStringConverter::GetRangeListFromString( aRangeList, aRange, rDoc, ::formula::FormulaGrammar::CONV_OOO, ';' )) + throw lang::IllegalArgumentException(); + + size_t nCount = aRangeList.size(); + if (!nCount) + throw lang::IllegalArgumentException(); + + xRet.realloc(nCount); + auto pRet = xRet.getArray(); + for( size_t nIndex = 0; nIndex < nCount; nIndex++ ) + { + const ScRange & rRange = aRangeList[ nIndex ]; + pRet[nIndex] = new ScCellRangeObj(pDocShell, rRange); + } + + return xRet; +} + +// XEnumerationAccess + +uno::Reference<container::XEnumeration> SAL_CALL ScTableSheetsObj::createEnumeration() +{ + SolarMutexGuard aGuard; + return new ScIndexEnumeration(this, "com.sun.star.sheet.SpreadsheetsEnumeration"); +} + +// XIndexAccess + +sal_Int32 SAL_CALL ScTableSheetsObj::getCount() +{ + SolarMutexGuard aGuard; + if (pDocShell) + return pDocShell->GetDocument().GetTableCount(); + return 0; +} + +uno::Any SAL_CALL ScTableSheetsObj::getByIndex( sal_Int32 nIndex ) +{ + SolarMutexGuard aGuard; + uno::Reference<sheet::XSpreadsheet> xSheet(GetObjectByIndex_Impl(nIndex)); + if (!xSheet.is()) + throw lang::IndexOutOfBoundsException(); + + return uno::Any(xSheet); + +// return uno::Any(); +} + +uno::Type SAL_CALL ScTableSheetsObj::getElementType() +{ + return cppu::UnoType<sheet::XSpreadsheet>::get(); +} + +sal_Bool SAL_CALL ScTableSheetsObj::hasElements() +{ + SolarMutexGuard aGuard; + return ( getCount() != 0 ); +} + +// XNameAccess + +uno::Any SAL_CALL ScTableSheetsObj::getByName( const OUString& aName ) +{ + SolarMutexGuard aGuard; + uno::Reference<sheet::XSpreadsheet> xSheet(GetObjectByName_Impl(aName)); + if (!xSheet.is()) + throw container::NoSuchElementException(); + + return uno::Any(xSheet); +} + +uno::Sequence<OUString> SAL_CALL ScTableSheetsObj::getElementNames() +{ + SolarMutexGuard aGuard; + if (pDocShell) + { + ScDocument& rDoc = pDocShell->GetDocument(); + SCTAB nCount = rDoc.GetTableCount(); + OUString aName; + uno::Sequence<OUString> aSeq(nCount); + OUString* pAry = aSeq.getArray(); + for (SCTAB i=0; i<nCount; i++) + { + rDoc.GetName( i, aName ); + pAry[i] = aName; + } + return aSeq; + } + return uno::Sequence<OUString>(); +} + +sal_Bool SAL_CALL ScTableSheetsObj::hasByName( const OUString& aName ) +{ + SolarMutexGuard aGuard; + if (pDocShell) + { + SCTAB nIndex; + if ( pDocShell->GetDocument().GetTable( aName, nIndex ) ) + return true; + } + return false; +} + +ScTableColumnsObj::ScTableColumnsObj(ScDocShell* pDocSh, SCTAB nT, SCCOL nSC, SCCOL nEC) : + pDocShell( pDocSh ), + nTab ( nT ), + nStartCol( nSC ), + nEndCol ( nEC ) +{ + pDocShell->GetDocument().AddUnoObject(*this); +} + +ScTableColumnsObj::~ScTableColumnsObj() +{ + SolarMutexGuard g; + + if (pDocShell) + pDocShell->GetDocument().RemoveUnoObject(*this); +} + +void ScTableColumnsObj::Notify( SfxBroadcaster&, const SfxHint& rHint ) +{ + if ( dynamic_cast<const ScUpdateRefHint*>(&rHint) ) + { + //! update of references for sheet and its start/end + } + else if ( rHint.GetId() == SfxHintId::Dying ) + { + pDocShell = nullptr; // became invalid + } +} + +// XTableColumns + +rtl::Reference<ScTableColumnObj> ScTableColumnsObj::GetObjectByIndex_Impl(sal_Int32 nIndex) const +{ + SCCOL nCol = static_cast<SCCOL>(nIndex) + nStartCol; + if ( pDocShell && nCol <= nEndCol ) + return new ScTableColumnObj( pDocShell, nCol, nTab ); + + return nullptr; // wrong index +} + +rtl::Reference<ScTableColumnObj> ScTableColumnsObj::GetObjectByName_Impl(const OUString& aName) const +{ + SCCOL nCol = 0; + if (pDocShell && ::AlphaToCol(pDocShell->GetDocument(), nCol, aName)) + if (nCol >= nStartCol && nCol <= nEndCol) + return new ScTableColumnObj( pDocShell, nCol, nTab ); + + return nullptr; +} + +void SAL_CALL ScTableColumnsObj::insertByIndex( sal_Int32 nPosition, sal_Int32 nCount ) +{ + SolarMutexGuard aGuard; + bool bDone = false; + if ( pDocShell ) + { + const ScDocument& rDoc = pDocShell->GetDocument(); + if ( nCount > 0 && nPosition >= 0 && nStartCol+nPosition <= nEndCol && + nStartCol+nPosition+nCount-1 <= rDoc.MaxCol() ) + { + ScRange aRange( static_cast<SCCOL>(nStartCol+nPosition), 0, nTab, + static_cast<SCCOL>(nStartCol+nPosition+nCount-1), rDoc.MaxRow(), nTab ); + bDone = pDocShell->GetDocFunc().InsertCells( aRange, nullptr, INS_INSCOLS_BEFORE, true, true ); + } + } + if (!bDone) + throw uno::RuntimeException(); // no other exceptions specified +} + +void SAL_CALL ScTableColumnsObj::removeByIndex( sal_Int32 nIndex, sal_Int32 nCount ) +{ + SolarMutexGuard aGuard; + bool bDone = false; + // the range to be deleted has to lie within the object + if ( pDocShell ) + { + const ScDocument& rDoc = pDocShell->GetDocument(); + if ( nCount > 0 && nIndex >= 0 && nStartCol+nIndex+nCount-1 <= nEndCol ) + { + ScRange aRange( static_cast<SCCOL>(nStartCol+nIndex), 0, nTab, + static_cast<SCCOL>(nStartCol+nIndex+nCount-1), rDoc.MaxRow(), nTab ); + bDone = pDocShell->GetDocFunc().DeleteCells( aRange, nullptr, DelCellCmd::Cols, true ); + } + } + if (!bDone) + throw uno::RuntimeException(); // no other exceptions specified +} + +// XEnumerationAccess + +uno::Reference<container::XEnumeration> SAL_CALL ScTableColumnsObj::createEnumeration() +{ + SolarMutexGuard aGuard; + return new ScIndexEnumeration(this, "com.sun.star.table.TableColumnsEnumeration"); +} + +// XIndexAccess + +sal_Int32 SAL_CALL ScTableColumnsObj::getCount() +{ + SolarMutexGuard aGuard; + return nEndCol - nStartCol + 1; +} + +uno::Any SAL_CALL ScTableColumnsObj::getByIndex( sal_Int32 nIndex ) +{ + SolarMutexGuard aGuard; + uno::Reference<table::XCellRange> xColumn(GetObjectByIndex_Impl(nIndex)); + if (!xColumn.is()) + throw lang::IndexOutOfBoundsException(); + + return uno::Any(xColumn); + +} + +uno::Type SAL_CALL ScTableColumnsObj::getElementType() +{ + return cppu::UnoType<table::XCellRange>::get(); +} + +sal_Bool SAL_CALL ScTableColumnsObj::hasElements() +{ + SolarMutexGuard aGuard; + return ( getCount() != 0 ); +} + +uno::Any SAL_CALL ScTableColumnsObj::getByName( const OUString& aName ) +{ + SolarMutexGuard aGuard; + uno::Reference<table::XCellRange> xColumn(GetObjectByName_Impl(aName)); + if (!xColumn.is()) + throw container::NoSuchElementException(); + + return uno::Any(xColumn); +} + +uno::Sequence<OUString> SAL_CALL ScTableColumnsObj::getElementNames() +{ + SolarMutexGuard aGuard; + SCCOL nCount = nEndCol - nStartCol + 1; + uno::Sequence<OUString> aSeq(nCount); + OUString* pAry = aSeq.getArray(); + for (SCCOL i=0; i<nCount; i++) + pAry[i] = ::ScColToAlpha( nStartCol + i ); + + return aSeq; +} + +sal_Bool SAL_CALL ScTableColumnsObj::hasByName( const OUString& aName ) +{ + SolarMutexGuard aGuard; + SCCOL nCol = 0; + if (pDocShell && ::AlphaToCol(pDocShell->GetDocument(), nCol, aName)) + if (nCol >= nStartCol && nCol <= nEndCol) + return true; + + return false; // not found +} + +// XPropertySet + +uno::Reference<beans::XPropertySetInfo> SAL_CALL ScTableColumnsObj::getPropertySetInfo() +{ + static uno::Reference<beans::XPropertySetInfo> aRef( + new SfxItemPropertySetInfo( lcl_GetColumnsPropertyMap() )); + return aRef; +} + +void SAL_CALL ScTableColumnsObj::setPropertyValue( + const OUString& aPropertyName, const uno::Any& aValue ) +{ + SolarMutexGuard aGuard; + if (!pDocShell) + throw uno::RuntimeException(); + + std::vector<sc::ColRowSpan> aColArr(1, sc::ColRowSpan(nStartCol,nEndCol)); + ScDocFunc& rFunc = pDocShell->GetDocFunc(); + + if ( aPropertyName == SC_UNONAME_CELLWID ) + { + sal_Int32 nNewWidth = 0; + if ( aValue >>= nNewWidth ) + rFunc.SetWidthOrHeight( + true, aColArr, nTab, SC_SIZE_ORIGINAL, o3tl::toTwips(nNewWidth, o3tl::Length::mm100), true, true); + } + else if ( aPropertyName == SC_UNONAME_CELLVIS ) + { + bool bVis = ScUnoHelpFunctions::GetBoolFromAny( aValue ); + ScSizeMode eMode = bVis ? SC_SIZE_SHOW : SC_SIZE_DIRECT; + rFunc.SetWidthOrHeight(true, aColArr, nTab, eMode, 0, true, true); + // SC_SIZE_DIRECT with size 0: hide + } + else if ( aPropertyName == SC_UNONAME_OWIDTH ) + { + bool bOpt = ScUnoHelpFunctions::GetBoolFromAny( aValue ); + if (bOpt) + rFunc.SetWidthOrHeight( + true, aColArr, nTab, SC_SIZE_OPTIMAL, STD_EXTRA_WIDTH, true, true); + // sal_False for columns currently has no effect + } + else if ( aPropertyName == SC_UNONAME_NEWPAGE || aPropertyName == SC_UNONAME_MANPAGE ) + { + //! single function to set/remove all breaks? + bool bSet = ScUnoHelpFunctions::GetBoolFromAny( aValue ); + for (SCCOL nCol=nStartCol; nCol<=nEndCol; nCol++) + if (bSet) + rFunc.InsertPageBreak( true, ScAddress(nCol,0,nTab), true, true ); + else + rFunc.RemovePageBreak( true, ScAddress(nCol,0,nTab), true, true ); + } +} + +uno::Any SAL_CALL ScTableColumnsObj::getPropertyValue( const OUString& aPropertyName ) +{ + SolarMutexGuard aGuard; + if (!pDocShell) + throw uno::RuntimeException(); + + ScDocument& rDoc = pDocShell->GetDocument(); + uno::Any aAny; + + //! loop over all columns for current state? + + if ( aPropertyName == SC_UNONAME_CELLWID ) + { + // for hidden column, return original height + sal_uInt16 nWidth = rDoc.GetOriginalWidth( nStartCol, nTab ); + aAny <<= static_cast<sal_Int32>(convertTwipToMm100(nWidth)); + } + else if ( aPropertyName == SC_UNONAME_CELLVIS ) + { + bool bVis = !rDoc.ColHidden(nStartCol, nTab); + aAny <<= bVis; + } + else if ( aPropertyName == SC_UNONAME_OWIDTH ) + { + bool bOpt = !(rDoc.GetColFlags( nStartCol, nTab ) & CRFlags::ManualSize); + aAny <<= bOpt; + } + else if ( aPropertyName == SC_UNONAME_NEWPAGE ) + { + ScBreakType nBreak = rDoc.HasColBreak(nStartCol, nTab); + aAny <<= (nBreak != ScBreakType::NONE); + } + else if ( aPropertyName == SC_UNONAME_MANPAGE ) + { + ScBreakType nBreak = rDoc.HasColBreak(nStartCol, nTab); + aAny <<= bool(nBreak & ScBreakType::Manual); + } + + return aAny; +} + +SC_IMPL_DUMMY_PROPERTY_LISTENER( ScTableColumnsObj ) + +ScTableRowsObj::ScTableRowsObj(ScDocShell* pDocSh, SCTAB nT, SCROW nSR, SCROW nER) : + pDocShell( pDocSh ), + nTab ( nT ), + nStartRow( nSR ), + nEndRow ( nER ) +{ + pDocShell->GetDocument().AddUnoObject(*this); +} + +ScTableRowsObj::~ScTableRowsObj() +{ + SolarMutexGuard g; + + if (pDocShell) + pDocShell->GetDocument().RemoveUnoObject(*this); +} + +void ScTableRowsObj::Notify( SfxBroadcaster&, const SfxHint& rHint ) +{ + if ( dynamic_cast<const ScUpdateRefHint*>(&rHint) ) + { + //! update of references for sheet and its start/end + } + else if ( rHint.GetId() == SfxHintId::Dying ) + { + pDocShell = nullptr; // became invalid + } +} + +// XTableRows + +rtl::Reference<ScTableRowObj> ScTableRowsObj::GetObjectByIndex_Impl(sal_Int32 nIndex) const +{ + SCROW nRow = static_cast<SCROW>(nIndex) + nStartRow; + if ( pDocShell && nRow <= nEndRow ) + return new ScTableRowObj( pDocShell, nRow, nTab ); + + return nullptr; // wrong index +} + +void SAL_CALL ScTableRowsObj::insertByIndex( sal_Int32 nPosition, sal_Int32 nCount ) +{ + SolarMutexGuard aGuard; + bool bDone = false; + if ( pDocShell ) + { + const ScDocument& rDoc = pDocShell->GetDocument(); + if ( nCount > 0 && nPosition >= 0 && nStartRow+nPosition <= nEndRow && + nStartRow+nPosition+nCount-1 <= rDoc.MaxRow() ) + { + ScRange aRange( 0, static_cast<SCROW>(nStartRow+nPosition), nTab, + rDoc.MaxCol(), static_cast<SCROW>(nStartRow+nPosition+nCount-1), nTab ); + bDone = pDocShell->GetDocFunc().InsertCells( aRange, nullptr, INS_INSROWS_BEFORE, true, true ); + } + } + if (!bDone) + throw uno::RuntimeException(); // no other exceptions specified +} + +void SAL_CALL ScTableRowsObj::removeByIndex( sal_Int32 nIndex, sal_Int32 nCount ) +{ + SolarMutexGuard aGuard; + bool bDone = false; + // the range to be deleted has to lie within the object + if ( pDocShell && nCount > 0 && nIndex >= 0 && nStartRow+nIndex+nCount-1 <= nEndRow ) + { + const ScDocument& rDoc = pDocShell->GetDocument(); + ScRange aRange( 0, static_cast<SCROW>(nStartRow+nIndex), nTab, + rDoc.MaxCol(), static_cast<SCROW>(nStartRow+nIndex+nCount-1), nTab ); + bDone = pDocShell->GetDocFunc().DeleteCells( aRange, nullptr, DelCellCmd::Rows, true ); + } + if (!bDone) + throw uno::RuntimeException(); // no other exceptions specified +} + +// XEnumerationAccess + +uno::Reference<container::XEnumeration> SAL_CALL ScTableRowsObj::createEnumeration() +{ + SolarMutexGuard aGuard; + return new ScIndexEnumeration(this, "com.sun.star.table.TableRowsEnumeration"); +} + +// XIndexAccess + +sal_Int32 SAL_CALL ScTableRowsObj::getCount() +{ + SolarMutexGuard aGuard; + return nEndRow - nStartRow + 1; +} + +uno::Any SAL_CALL ScTableRowsObj::getByIndex( sal_Int32 nIndex ) +{ + SolarMutexGuard aGuard; + uno::Reference<table::XCellRange> xRow(GetObjectByIndex_Impl(nIndex)); + if (!xRow.is()) + throw lang::IndexOutOfBoundsException(); + + return uno::Any(xRow); +} + +uno::Type SAL_CALL ScTableRowsObj::getElementType() +{ + return cppu::UnoType<table::XCellRange>::get(); +} + +sal_Bool SAL_CALL ScTableRowsObj::hasElements() +{ + SolarMutexGuard aGuard; + return ( getCount() != 0 ); +} + +// XPropertySet + +uno::Reference<beans::XPropertySetInfo> SAL_CALL ScTableRowsObj::getPropertySetInfo() +{ + static uno::Reference<beans::XPropertySetInfo> aRef( + new SfxItemPropertySetInfo( lcl_GetRowsPropertyMap() )); + return aRef; +} + +void SAL_CALL ScTableRowsObj::setPropertyValue( + const OUString& aPropertyName, const uno::Any& aValue ) +{ + SolarMutexGuard aGuard; + if (!pDocShell) + throw uno::RuntimeException(); + + ScDocFunc& rFunc = pDocShell->GetDocFunc(); + ScDocument& rDoc = pDocShell->GetDocument(); + std::vector<sc::ColRowSpan> aRowArr(1, sc::ColRowSpan(nStartRow,nEndRow)); + + if ( aPropertyName == SC_UNONAME_OHEIGHT ) + { + sal_Int32 nNewHeight = 0; + if ( rDoc.IsImportingXML() && ( aValue >>= nNewHeight ) ) + { + // used to set the stored row height for rows with optimal height when loading. + + // TODO: It's probably cleaner to use a different property name + // for this. + rDoc.SetRowHeightOnly( nStartRow, nEndRow, nTab, o3tl::toTwips(nNewHeight, o3tl::Length::mm100) ); + } + else + { + bool bOpt = ScUnoHelpFunctions::GetBoolFromAny( aValue ); + if (bOpt) + rFunc.SetWidthOrHeight(false, aRowArr, nTab, SC_SIZE_OPTIMAL, 0, true, true); + else + { + //! manually set old heights again? + } + } + } + else if ( aPropertyName == SC_UNONAME_CELLHGT ) + { + sal_Int32 nNewHeight = 0; + if ( aValue >>= nNewHeight ) + { + if (rDoc.IsImportingXML()) + { + // TODO: This is a band-aid fix. Eventually we need to + // re-work ods' style import to get it to set styles to + // ScDocument directly. + rDoc.SetRowHeightOnly( nStartRow, nEndRow, nTab, o3tl::toTwips(nNewHeight, o3tl::Length::mm100) ); + rDoc.SetManualHeight( nStartRow, nEndRow, nTab, true ); + } + else + rFunc.SetWidthOrHeight( + false, aRowArr, nTab, SC_SIZE_ORIGINAL, o3tl::toTwips(nNewHeight, o3tl::Length::mm100), true, true); + } + } + else if ( aPropertyName == SC_UNONAME_CELLVIS ) + { + bool bVis = ScUnoHelpFunctions::GetBoolFromAny( aValue ); + ScSizeMode eMode = bVis ? SC_SIZE_SHOW : SC_SIZE_DIRECT; + rFunc.SetWidthOrHeight(false, aRowArr, nTab, eMode, 0, true, true); + // SC_SIZE_DIRECT with size 0: hide + } + else if ( aPropertyName == SC_UNONAME_VISFLAG ) + { + // #i116460# Shortcut to only set the flag, without drawing layer update etc. + // Should only be used from import filters. + rDoc.SetRowHidden(nStartRow, nEndRow, nTab, !ScUnoHelpFunctions::GetBoolFromAny( aValue )); + } + else if ( aPropertyName == SC_UNONAME_CELLFILT ) + { + //! undo etc. + if (ScUnoHelpFunctions::GetBoolFromAny( aValue )) + rDoc.SetRowFiltered(nStartRow, nEndRow, nTab, true); + else + rDoc.SetRowFiltered(nStartRow, nEndRow, nTab, false); + } + else if ( aPropertyName == SC_UNONAME_NEWPAGE || aPropertyName == SC_UNONAME_MANPAGE ) + { + //! single function to set/remove all breaks? + bool bSet = ScUnoHelpFunctions::GetBoolFromAny( aValue ); + for (SCROW nRow=nStartRow; nRow<=nEndRow; nRow++) + if (bSet) + rFunc.InsertPageBreak( false, ScAddress(0,nRow,nTab), true, true ); + else + rFunc.RemovePageBreak( false, ScAddress(0,nRow,nTab), true, true ); + } + else if ( aPropertyName == SC_UNONAME_CELLBACK || aPropertyName == SC_UNONAME_CELLTRAN ) + { + // #i57867# Background color is specified for row styles in the file format, + // so it has to be supported along with the row properties (import only). + + // Use ScCellRangeObj to set the property for all cells in the rows + // (this means, the "row attribute" must be set before individual cell attributes). + + ScRange aRange( 0, nStartRow, nTab, rDoc.MaxCol(), nEndRow, nTab ); + uno::Reference<beans::XPropertySet> xRangeObj = new ScCellRangeObj( pDocShell, aRange ); + xRangeObj->setPropertyValue( aPropertyName, aValue ); + } +} + +uno::Any SAL_CALL ScTableRowsObj::getPropertyValue( const OUString& aPropertyName ) +{ + SolarMutexGuard aGuard; + if (!pDocShell) + throw uno::RuntimeException(); + + ScDocument& rDoc = pDocShell->GetDocument(); + uno::Any aAny; + + //! loop over all rows for current state? + + if ( aPropertyName == SC_UNONAME_CELLHGT ) + { + // for hidden row, return original height + sal_uInt16 nHeight = rDoc.GetOriginalHeight( nStartRow, nTab ); + aAny <<= static_cast<sal_Int32>(convertTwipToMm100(nHeight)); + } + else if ( aPropertyName == SC_UNONAME_CELLVIS ) + { + SCROW nLastRow; + bool bVis = !rDoc.RowHidden(nStartRow, nTab, nullptr, &nLastRow); + aAny <<= bVis; + } + else if ( aPropertyName == SC_UNONAME_CELLFILT ) + { + bool bVis = rDoc.RowFiltered(nStartRow, nTab); + aAny <<= bVis; + } + else if ( aPropertyName == SC_UNONAME_OHEIGHT ) + { + bool bOpt = !(rDoc.GetRowFlags( nStartRow, nTab ) & CRFlags::ManualSize); + aAny <<= bOpt; + } + else if ( aPropertyName == SC_UNONAME_NEWPAGE ) + { + ScBreakType nBreak = rDoc.HasRowBreak(nStartRow, nTab); + aAny <<= (nBreak != ScBreakType::NONE); + } + else if ( aPropertyName == SC_UNONAME_MANPAGE ) + { + ScBreakType nBreak = rDoc.HasRowBreak(nStartRow, nTab); + aAny <<= bool(nBreak & ScBreakType::Manual); + } + else if ( aPropertyName == SC_UNONAME_CELLBACK || aPropertyName == SC_UNONAME_CELLTRAN ) + { + // Use ScCellRangeObj to get the property from the cell range + // (for completeness only, this is not used by the XML filter). + + ScRange aRange( 0, nStartRow, nTab, rDoc.MaxCol(), nEndRow, nTab ); + uno::Reference<beans::XPropertySet> xRangeObj = new ScCellRangeObj( pDocShell, aRange ); + aAny = xRangeObj->getPropertyValue( aPropertyName ); + } + + return aAny; +} + +SC_IMPL_DUMMY_PROPERTY_LISTENER( ScTableRowsObj ) + +ScSpreadsheetSettingsObj::~ScSpreadsheetSettingsObj() +{ +} + +// XPropertySet + +uno::Reference<beans::XPropertySetInfo> SAL_CALL ScSpreadsheetSettingsObj::getPropertySetInfo() +{ + return nullptr; +} + +void SAL_CALL ScSpreadsheetSettingsObj::setPropertyValue( + const OUString& /* aPropertyName */, const uno::Any& /* aValue */ ) +{ +} + +uno::Any SAL_CALL ScSpreadsheetSettingsObj::getPropertyValue( const OUString& /* aPropertyName */ ) +{ + return uno::Any(); +} + +SC_IMPL_DUMMY_PROPERTY_LISTENER( ScSpreadsheetSettingsObj ) + +ScAnnotationsObj::ScAnnotationsObj(ScDocShell* pDocSh, SCTAB nT) : + pDocShell( pDocSh ), + nTab( nT ) +{ + pDocShell->GetDocument().AddUnoObject(*this); +} + +ScAnnotationsObj::~ScAnnotationsObj() +{ + SolarMutexGuard g; + + if (pDocShell) + pDocShell->GetDocument().RemoveUnoObject(*this); +} + +void ScAnnotationsObj::Notify( SfxBroadcaster&, const SfxHint& rHint ) +{ + //! adjust nTab when updating references!!! + + if ( rHint.GetId() == SfxHintId::Dying ) + { + pDocShell = nullptr; // became invalid + } +} + +bool ScAnnotationsObj::GetAddressByIndex_Impl( sal_Int32 nIndex, ScAddress& rPos ) const +{ + if (!pDocShell) + return false; + + ScDocument& rDoc = pDocShell->GetDocument(); + rPos = rDoc.GetNotePosition(nIndex, nTab); + return rPos.IsValid(); +} + +rtl::Reference<ScAnnotationObj> ScAnnotationsObj::GetObjectByIndex_Impl( sal_Int32 nIndex ) const +{ + if (pDocShell) + { + ScAddress aPos; + if ( GetAddressByIndex_Impl( nIndex, aPos ) ) + return new ScAnnotationObj( pDocShell, aPos ); + } + return nullptr; +} + +// XSheetAnnotations + +void SAL_CALL ScAnnotationsObj::insertNew( + const table::CellAddress& aPosition, const OUString& rText ) +{ + SolarMutexGuard aGuard; + if (pDocShell) + { + OSL_ENSURE( aPosition.Sheet == nTab, "addAnnotation with a wrong Sheet" ); + ScAddress aPos( static_cast<SCCOL>(aPosition.Column), static_cast<SCROW>(aPosition.Row), nTab ); + pDocShell->GetDocFunc().ReplaceNote( aPos, rText, nullptr, nullptr, true ); + } +} + +void SAL_CALL ScAnnotationsObj::removeByIndex( sal_Int32 nIndex ) +{ + SolarMutexGuard aGuard; + if (pDocShell) + { + ScAddress aPos; + if ( GetAddressByIndex_Impl( nIndex, aPos ) ) + { + ScMarkData aMarkData(pDocShell->GetDocument().GetSheetLimits()); + aMarkData.SelectTable( aPos.Tab(), true ); + aMarkData.SetMultiMarkArea( ScRange(aPos) ); + + pDocShell->GetDocFunc().DeleteContents( aMarkData, InsertDeleteFlags::NOTE, true, true ); + } + } +} + +// XEnumerationAccess + +uno::Reference<container::XEnumeration> SAL_CALL ScAnnotationsObj::createEnumeration() +{ + //! iterate directly (more efficiently)? + + SolarMutexGuard aGuard; + return new ScIndexEnumeration(this, "com.sun.star.sheet.CellAnnotationsEnumeration"); +} + +// XIndexAccess + +sal_Int32 SAL_CALL ScAnnotationsObj::getCount() +{ + SolarMutexGuard aGuard; + sal_Int32 nCount = 0; + if (pDocShell) + { + const ScDocument& rDoc = pDocShell->GetDocument(); + for (SCCOL nCol : rDoc.GetAllocatedColumnsRange(nTab, 0, rDoc.MaxCol())) + nCount += rDoc.GetNoteCount(nTab, nCol); + } + return nCount; +} + +uno::Any SAL_CALL ScAnnotationsObj::getByIndex( sal_Int32 nIndex ) +{ + SolarMutexGuard aGuard; + uno::Reference<sheet::XSheetAnnotation> xAnnotation(GetObjectByIndex_Impl(nIndex)); + if (!xAnnotation.is()) + throw lang::IndexOutOfBoundsException(); + + return uno::Any(xAnnotation); +} + +uno::Type SAL_CALL ScAnnotationsObj::getElementType() +{ + return cppu::UnoType<sheet::XSheetAnnotation>::get(); +} + +sal_Bool SAL_CALL ScAnnotationsObj::hasElements() +{ + SolarMutexGuard aGuard; + return ( getCount() != 0 ); +} + +ScScenariosObj::ScScenariosObj(ScDocShell* pDocSh, SCTAB nT) : + pDocShell( pDocSh ), + nTab ( nT ) +{ + pDocShell->GetDocument().AddUnoObject(*this); +} + +ScScenariosObj::~ScScenariosObj() +{ + SolarMutexGuard g; + + if (pDocShell) + pDocShell->GetDocument().RemoveUnoObject(*this); +} + +void ScScenariosObj::Notify( SfxBroadcaster&, const SfxHint& rHint ) +{ + if ( dynamic_cast<const ScUpdateRefHint*>(&rHint) ) + { + //! update of references for sheet and its start/end + } + else if ( rHint.GetId() == SfxHintId::Dying ) + { + pDocShell = nullptr; // became invalid + } +} + +// XScenarios + +bool ScScenariosObj::GetScenarioIndex_Impl( std::u16string_view rName, SCTAB& rIndex ) +{ + //! Case-insensitive ???? + + if ( pDocShell ) + { + OUString aTabName; + ScDocument& rDoc = pDocShell->GetDocument(); + SCTAB nCount = static_cast<SCTAB>(getCount()); + for (SCTAB i=0; i<nCount; i++) + if (rDoc.GetName( nTab+i+1, aTabName )) + if (aTabName == rName) + { + rIndex = i; + return true; + } + } + + return false; +} + +rtl::Reference<ScTableSheetObj> ScScenariosObj::GetObjectByIndex_Impl(sal_Int32 nIndex) +{ + sal_uInt16 nCount = static_cast<sal_uInt16>(getCount()); + if ( pDocShell && nIndex >= 0 && nIndex < nCount ) + return new ScTableSheetObj( pDocShell, nTab+static_cast<SCTAB>(nIndex)+1 ); + + return nullptr; // no document or wrong index +} + +rtl::Reference<ScTableSheetObj> ScScenariosObj::GetObjectByName_Impl(std::u16string_view aName) +{ + SCTAB nIndex; + if ( pDocShell && GetScenarioIndex_Impl( aName, nIndex ) ) + return new ScTableSheetObj( pDocShell, nTab+nIndex+1 ); + + return nullptr; // not found +} + +void SAL_CALL ScScenariosObj::addNewByName( const OUString& aName, + const uno::Sequence<table::CellRangeAddress>& aRanges, + const OUString& aComment ) +{ + SolarMutexGuard aGuard; + if ( !pDocShell ) + return; + + ScMarkData aMarkData(pDocShell->GetDocument().GetSheetLimits()); + aMarkData.SelectTable( nTab, true ); + + for (const table::CellRangeAddress& rRange : aRanges) + { + OSL_ENSURE( rRange.Sheet == nTab, "addScenario with a wrong Tab" ); + ScRange aRange( static_cast<SCCOL>(rRange.StartColumn), static_cast<SCROW>(rRange.StartRow), nTab, + static_cast<SCCOL>(rRange.EndColumn), static_cast<SCROW>(rRange.EndRow), nTab ); + + aMarkData.SetMultiMarkArea( aRange ); + } + + ScScenarioFlags const nFlags = ScScenarioFlags::ShowFrame | ScScenarioFlags::PrintFrame + | ScScenarioFlags::TwoWay | ScScenarioFlags::Protected; + + pDocShell->MakeScenario( nTab, aName, aComment, COL_LIGHTGRAY, nFlags, aMarkData ); +} + +void SAL_CALL ScScenariosObj::removeByName( const OUString& aName ) +{ + SolarMutexGuard aGuard; + SCTAB nIndex; + if ( pDocShell && GetScenarioIndex_Impl( aName, nIndex ) ) + pDocShell->GetDocFunc().DeleteTable( nTab+nIndex+1, true ); +} + +// XEnumerationAccess + +uno::Reference<container::XEnumeration> SAL_CALL ScScenariosObj::createEnumeration() +{ + SolarMutexGuard aGuard; + return new ScIndexEnumeration(this, "com.sun.star.sheet.ScenariosEnumeration"); +} + +// XIndexAccess + +sal_Int32 SAL_CALL ScScenariosObj::getCount() +{ + SolarMutexGuard aGuard; + SCTAB nCount = 0; + if ( pDocShell ) + { + ScDocument& rDoc = pDocShell->GetDocument(); + if (!rDoc.IsScenario(nTab)) + { + SCTAB nTabCount = rDoc.GetTableCount(); + SCTAB nNext = nTab + 1; + while (nNext < nTabCount && rDoc.IsScenario(nNext)) + { + ++nCount; + ++nNext; + } + } + } + return nCount; +} + +uno::Any SAL_CALL ScScenariosObj::getByIndex( sal_Int32 nIndex ) +{ + SolarMutexGuard aGuard; + uno::Reference<sheet::XScenario> xScen(GetObjectByIndex_Impl(nIndex)); + if (!xScen.is()) + throw lang::IndexOutOfBoundsException(); + + return uno::Any(xScen); +} + +uno::Type SAL_CALL ScScenariosObj::getElementType() +{ + return cppu::UnoType<sheet::XScenario>::get(); +} + +sal_Bool SAL_CALL ScScenariosObj::hasElements() +{ + SolarMutexGuard aGuard; + return ( getCount() != 0 ); +} + +uno::Any SAL_CALL ScScenariosObj::getByName( const OUString& aName ) +{ + SolarMutexGuard aGuard; + uno::Reference<sheet::XScenario> xScen(GetObjectByName_Impl(aName)); + if (!xScen.is()) + throw container::NoSuchElementException(); + + return uno::Any(xScen); +} + +uno::Sequence<OUString> SAL_CALL ScScenariosObj::getElementNames() +{ + SolarMutexGuard aGuard; + SCTAB nCount = static_cast<SCTAB>(getCount()); + uno::Sequence<OUString> aSeq(nCount); + + if ( pDocShell ) // otherwise Count = 0 + { + OUString aTabName; + ScDocument& rDoc = pDocShell->GetDocument(); + OUString* pAry = aSeq.getArray(); + for (SCTAB i=0; i<nCount; i++) + if (rDoc.GetName( nTab+i+1, aTabName )) + pAry[i] = aTabName; + } + + return aSeq; +} + +sal_Bool SAL_CALL ScScenariosObj::hasByName( const OUString& aName ) +{ + SolarMutexGuard aGuard; + SCTAB nIndex; + return GetScenarioIndex_Impl( aName, nIndex ); +} + +/* vim:set shiftwidth=4 softtabstop=4 expandtab: */ |