summaryrefslogtreecommitdiffstats
path: root/setup_native/scripts/admin.pl
diff options
context:
space:
mode:
Diffstat (limited to 'setup_native/scripts/admin.pl')
-rw-r--r--setup_native/scripts/admin.pl1244
1 files changed, 1244 insertions, 0 deletions
diff --git a/setup_native/scripts/admin.pl b/setup_native/scripts/admin.pl
new file mode 100644
index 000000000..714da400c
--- /dev/null
+++ b/setup_native/scripts/admin.pl
@@ -0,0 +1,1244 @@
+#
+# This file is part of the LibreOffice project.
+#
+# This Source Code Form is subject to the terms of the Mozilla Public
+# License, v. 2.0. If a copy of the MPL was not distributed with this
+# file, You can obtain one at http://mozilla.org/MPL/2.0/.
+#
+# This file incorporates work covered by the following license notice:
+#
+# Licensed to the Apache Software Foundation (ASF) under one or more
+# contributor license agreements. See the NOTICE file distributed
+# with this work for additional information regarding copyright
+# ownership. The ASF licenses this file to you under the Apache
+# License, Version 2.0 (the "License"); you may not use this file
+# except in compliance with the License. You may obtain a copy of
+# the License at http://www.apache.org/licenses/LICENSE-2.0 .
+#
+
+use Cwd;
+use File::Copy;
+use File::Temp qw/ :mktemp /;
+
+#################################################################################
+# Global settings
+#################################################################################
+
+BEGIN
+{
+ $prog = "msi installer";
+ $targetdir = "";
+ $databasepath = "";
+ $starttime = "";
+ $globaltempdirname = "ooopackagingXXXXXX";
+ $savetemppath = "";
+ $msiinfo_available = 0;
+ $path_displayed = 0;
+ $localmsidbpath = "";
+
+ $plat = $^O;
+
+ if ( $plat =~ /cygwin/i )
+ {
+ $separator = "/";
+ $pathseparator = "\:";
+ }
+ else
+ {
+ $separator = "\\";
+ $pathseparator = "\;";
+ }
+}
+
+#################################################################################
+# Program information
+#################################################################################
+
+sub usage
+{
+ print <<End;
+----------------------------------------------------------------------
+This program installs a Windows Installer installation set
+without using msiexec.exe. The installation is comparable
+with an administrative installation using the Windows Installer
+service.
+Required parameter:
+-d Path to installation set or msi database
+-t Target directory
+---------------------------------------------------------------------
+End
+ exit(-1);
+}
+
+#################################################################################
+# Collecting parameter
+#################################################################################
+
+sub getparameter
+{
+ if (( $#ARGV < 3 ) || ( $#ARGV > 3 )) { usage(); }
+
+ while ( $#ARGV >= 0 )
+ {
+ my $param = shift(@ARGV);
+
+ if ($param eq "-t") { $targetdir = shift(@ARGV); }
+ elsif ($param eq "-d") { $databasepath = shift(@ARGV); }
+ else
+ {
+ print "\n**********************************************\n";
+ print "Error: Unknown parameter: $param";
+ print "\n**********************************************\n";
+ usage();
+ exit(-1);
+ }
+ }
+}
+
+#################################################################################
+# Checking content of parameter
+#################################################################################
+
+sub controlparameter
+{
+ if ( $targetdir eq "" )
+ {
+ print "\n******************************************************\n";
+ print "Error: Target directory not defined (parameter -t)!";
+ print "\n******************************************************\n";
+ usage();
+ exit(-1);
+ }
+
+ if ( $databasepath eq "" )
+ {
+ print "\n******************************************************\n";
+ print "Error: Path to msi database not defined (parameter -d)!";
+ print "\n******************************************************\n";
+ usage();
+ exit(-1);
+ }
+
+ if ( -d $databasepath )
+ {
+ $databasepath =~ s/\\\s*$//;
+ $databasepath =~ s/\/\s*$//;
+
+ my $msifiles = find_file_with_file_extension("msi", $databasepath);
+
+ if ( $#{$msifiles} < 0 ) { exit_program("ERROR: Did not find msi database in directory $installationdir"); }
+ if ( $#{$msifiles} > 0 ) { exit_program("ERROR: Did find more than one msi database in directory $installationdir"); }
+
+ $databasepath = $databasepath . $separator . ${$msifiles}[0];
+ }
+
+ if ( ! -f $databasepath ) { exit_program("ERROR: Did not find msi database in directory $databasepath."); }
+
+ if ( ! -d $targetdir ) { create_directories($targetdir); }
+}
+
+#############################################################################
+# The program msidb.exe can be located next to the Perl program. Then it is
+# not necessary to find it in the PATH variable.
+#############################################################################
+
+sub check_local_msidb
+{
+ my $msidbname = "msidb.exe";
+ my $perlprogramm = $0;
+ my $path = $perlprogramm;
+
+ get_path_from_fullqualifiedname(\$path);
+
+ $path =~ s/\\\s*$//;
+ $path =~ s/\/\s*$//;
+
+ my $msidbpath = "";
+ if ( $path =~ /^\s*$/ ) { $msidbpath = $msidbname; }
+ else { $msidbpath = $path . $separator . $msidbname; }
+
+ if ( -f $msidbpath )
+ {
+ $localmsidbpath = $msidbpath;
+ print "Using $msidbpath (next to \"admin.pl\")\n";
+ }
+}
+
+#############################################################################
+# Converting a string list with separator $listseparator
+# into an array
+#############################################################################
+
+sub convert_stringlist_into_array
+{
+ my ( $includestringref, $listseparator ) = @_;
+
+ my @newarray = ();
+ my $first;
+ my $last = ${$includestringref};
+
+ while ( $last =~ /^\s*(.+?)\Q$listseparator\E(.+)\s*$/) # "$" for minimal matching
+ {
+ $first = $1;
+ $last = $2;
+ # Problem with two directly following listseparators. For example a path with two ";;" directly behind each other
+ $first =~ s/^$listseparator//;
+ push(@newarray, "$first\n");
+ }
+
+ push(@newarray, "$last\n");
+
+ return \@newarray;
+}
+
+#########################################################
+# Checking the local system
+# Checking existence of needed files in include path
+#########################################################
+
+sub check_system_path
+{
+ my $onefile;
+ my $error = 0;
+ my $pathvariable = $ENV{'PATH'};
+ my $local_pathseparator = $pathseparator;
+
+ if( $^O =~ /cygwin/i )
+ { # When using cygwin's perl the PATH variable is POSIX style and ...
+ $pathvariable = qx{cygpath -mp "$pathvariable"} ;
+ # has to be converted to DOS style for further use.
+ $local_pathseparator = ';';
+ }
+ my $patharrayref = convert_stringlist_into_array(\$pathvariable, $local_pathseparator);
+
+ my @needed_files_in_path = ("expand.exe");
+ if ( $localmsidbpath eq "" ) { push(@needed_files_in_path, "msidb.exe"); } # not found locally -> search in path
+ my @optional_files_in_path = ("msiinfo.exe");
+
+ print("\nChecking required files:\n");
+
+ foreach $onefile ( @needed_files_in_path )
+ {
+ print("... searching $onefile ...");
+
+ my $fileref = get_sourcepath_from_filename_and_includepath(\$onefile, $patharrayref);
+
+ if ( $$fileref eq "" )
+ {
+ $error = 1;
+ print( "$onefile not found\n" );
+ }
+ else
+ {
+ print( "\tFound: $$fileref\n" );
+ }
+ }
+
+ if ( $error ) { exit_program("ERROR: Could not find all needed files in path (using setsolar should help)!"); }
+
+ print("\nChecking optional files:\n");
+
+ foreach $onefile ( @optional_files_in_path )
+ {
+ print("... searching $onefile ...");
+
+ my $fileref = get_sourcepath_from_filename_and_includepath(\$onefile, $patharrayref);
+
+ if ( $$fileref eq "" )
+ {
+ print( "$onefile not found\n" );
+ if ( $onefile eq "msiinfo.exe" ) { $msiinfo_available = 0; }
+ }
+ else
+ {
+ print( "\tFound: $$fileref\n" );
+ if ( $onefile eq "msiinfo.exe" ) { $msiinfo_available = 1; }
+ }
+ }
+
+}
+
+##########################################################################
+# Searching a file in a list of paths
+##########################################################################
+
+sub get_sourcepath_from_filename_and_includepath
+{
+ my ($searchfilenameref, $includepatharrayref) = @_;
+
+ my $onefile = "";
+ my $foundsourcefile = 0;
+
+ for ( my $j = 0; $j <= $#{$includepatharrayref}; $j++ )
+ {
+ my $includepath = ${$includepatharrayref}[$j];
+ $includepath =~ s/^\s*//;
+ $includepath =~ s/\s*$//;
+
+ $onefile = $includepath . $separator . $$searchfilenameref;
+
+ if ( -f $onefile )
+ {
+ $foundsourcefile = 1;
+ last;
+ }
+ }
+
+ if (!($foundsourcefile)) { $onefile = ""; }
+
+ return \$onefile;
+}
+
+########################################################
+# Finding all files with a specified file extension
+# in a specified directory.
+########################################################
+
+sub find_file_with_file_extension
+{
+ my ($extension, $dir) = @_;
+
+ my @allfiles = ();
+ my @sourcefiles = ();
+
+ $dir =~ s/\Q$separator\E\s*$//;
+
+ opendir(DIR, $dir);
+ @sourcefiles = readdir(DIR);
+ closedir(DIR);
+
+ my $onefile;
+
+ foreach $onefile (@sourcefiles)
+ {
+ if ((!($onefile eq ".")) && (!($onefile eq "..")))
+ {
+ if ( $onefile =~ /^\s*(\S.*?)\.$extension\s*$/ )
+ {
+ push(@allfiles, $onefile)
+ }
+ }
+ }
+
+ return \@allfiles;
+}
+
+##############################################################
+# Creating a directory with all parent directories
+##############################################################
+
+sub create_directories
+{
+ my ($directory) = @_;
+
+ if ( ! try_to_create_directory($directory) )
+ {
+ my $parentdir = $directory;
+ get_path_from_fullqualifiedname(\$parentdir);
+ create_directories($parentdir); # recursive
+ }
+
+ create_directory($directory); # now it has to succeed
+}
+
+##############################################################
+# Creating one directory
+##############################################################
+
+sub create_directory
+{
+ my ($directory) = @_;
+
+ if ( ! -d $directory ) { mkdir($directory, 0775); }
+}
+
+##############################################################
+# Trying to create a directory, no error if this fails
+##############################################################
+
+sub try_to_create_directory
+{
+ my ($directory) = @_;
+
+ my $returnvalue = 1;
+ my $created_directory = 0;
+
+ if (!(-d $directory))
+ {
+ $returnvalue = mkdir($directory, 0775);
+
+ if ($returnvalue)
+ {
+ $created_directory = 1;
+
+ my $localcall = "chmod 775 $directory \>\/dev\/null 2\>\&1";
+ system($localcall);
+ }
+ else
+ {
+ $created_directory = 0;
+ }
+ }
+ else
+ {
+ $created_directory = 1;
+ }
+
+ return $created_directory;
+}
+
+###########################################
+# Getting path from full file name
+###########################################
+
+sub get_path_from_fullqualifiedname
+{
+ my ($longfilenameref) = @_;
+
+ if ( $$longfilenameref =~ /\Q$separator\E/ ) # Is there a separator in the path? Otherwise the path is empty.
+ {
+ if ( $$longfilenameref =~ /^\s*(\S.*\Q$separator\E)(\S.+\S?)/ )
+ {
+ $$longfilenameref = $1;
+ }
+ }
+ else
+ {
+ $$longfilenameref = ""; # there is no path
+ }
+}
+
+##############################################################
+# Getting file name from full file name
+##############################################################
+
+sub make_absolute_filename_to_relative_filename
+{
+ my ($longfilenameref) = @_;
+
+ # Either '/' or '\'.
+ if ( $$longfilenameref =~ /^.*[\/\\](\S.+\S?)/ )
+ {
+ $$longfilenameref = $1;
+ }
+}
+
+############################################
+# Exiting the program with an error
+# This function is used instead of "die"
+############################################
+
+sub exit_program
+{
+ my ($message) = @_;
+
+ print "\n***************************************************************\n";
+ print "$message\n";
+ print "***************************************************************\n";
+ remove_complete_directory($savetemppath, 1);
+ print "\n" . get_time_string();
+ exit(-1);
+}
+
+#################################################################################
+# Unpacking cabinet files with expand
+#################################################################################
+
+sub unpack_cabinet_file
+{
+ my ($cabfilename, $unpackdir) = @_;
+
+ my $expandfile = "expand.exe"; # has to be in the PATH
+
+ # expand.exe has to be located in the system directory.
+ # Cygwin has another tool expand.exe, that converts tabs to spaces. This cannot be used of course.
+ # But this wrong expand.exe is typically in the PATH before this expand.exe, to unpack
+ # cabinet files.
+
+ if ( $^O =~ /cygwin/i )
+ {
+ $expandfile = $ENV{'SYSTEMROOT'} . "/system32/expand.exe"; # Has to be located in the systemdirectory
+ $expandfile =~ s/\\/\//;
+ if ( ! -f $expandfile ) { exit_program("ERROR: Did not find file $expandfile in the Windows system folder!"); }
+ }
+
+ my $expandlogfile = $unpackdir . $separator . "expand.log";
+
+ # exclude cabinet file
+ # my $systemcall = $cabarc . " -o X " . $mergemodulehash->{'cabinetfile'};
+
+ my $systemcall = "";
+ if ( $^O =~ /cygwin/i ) {
+ my $localunpackdir = qx{cygpath -w "$unpackdir"};
+ $localunpackdir =~ s/\\/\\\\/g;
+
+ my $localcabfilename = qx{cygpath -w "$cabfilename"};
+ $localcabfilename =~ s/\\/\\\\/g;
+ $localcabfilename =~ s/\s*$//g;
+
+ $systemcall = $expandfile . " " . $localcabfilename . " -F:\* " . $localunpackdir . " \>\/dev\/null 2\>\&1";
+ }
+ else
+ {
+ $systemcall = $expandfile . " " . $cabfilename . " -F:\* " . $unpackdir . " \> " . $expandlogfile;
+ }
+
+ my $returnvalue = system($systemcall);
+
+ if ($returnvalue) { exit_program("ERROR: Could not execute $systemcall !"); }
+}
+
+#################################################################################
+# Extracting tables from msi database
+#################################################################################
+
+sub extract_tables_from_database
+{
+ my ($fullmsidatabasepath, $workdir, $tablelist) = @_;
+
+ my $msidb = "msidb.exe"; # Has to be in the path
+ if ( $localmsidbpath ) { $msidb = $localmsidbpath; }
+ my $infoline = "";
+ my $systemcall = "";
+ my $returnvalue = "";
+
+ if ( $^O =~ /cygwin/i ) {
+ chomp( $fullmsidatabasepath = qx{cygpath -w "$fullmsidatabasepath"} );
+ # msidb.exe really wants backslashes. (And double escaping because system() expands the string.)
+ $fullmsidatabasepath =~ s/\\/\\\\/g;
+ $workdir =~ s/\\/\\\\/g;
+ # and if there are still slashes, they also need to be double backslash
+ $fullmsidatabasepath =~ s/\//\\\\/g;
+ $workdir =~ s/\//\\\\/g;
+ }
+
+ # Export of all tables by using "*"
+
+ $systemcall = $msidb . " -d " . $fullmsidatabasepath . " -f " . $workdir . " -e $tablelist";
+ print "\nAnalyzing msi database\n";
+ $returnvalue = system($systemcall);
+
+ if ($returnvalue)
+ {
+ $infoline = "ERROR: Could not execute $systemcall !\n";
+ exit_program($infoline);
+ }
+}
+
+########################################################
+# Check, if this installation set contains
+# internal cabinet files included into the msi
+# database.
+########################################################
+
+sub check_for_internal_cabfiles
+{
+ my ($cabfilehash) = @_;
+
+ my $contains_internal_cabfiles = 0;
+ my %allcabfileshash = ();
+
+ foreach my $filename ( keys %{$cabfilehash} )
+ {
+ if ( $filename =~ /^\s*\#/ ) # starting with a hash
+ {
+ $contains_internal_cabfiles = 1;
+ # setting real filename without hash as key and name with hash as value
+ my $realfilename = $filename;
+ $realfilename =~ s/^\s*\#//;
+ $allcabfileshash{$realfilename} = $filename;
+ }
+ }
+
+ return ( $contains_internal_cabfiles, \%allcabfileshash );
+}
+
+#################################################################
+# Exclude all cab files from the msi database.
+#################################################################
+
+sub extract_cabs_from_database
+{
+ my ($msidatabase, $allcabfiles) = @_;
+
+ my $infoline = "";
+ my $fullsuccess = 1;
+ my $msidb = "msidb.exe"; # Has to be in the path
+ if ( $localmsidbpath ) { $msidb = $localmsidbpath; }
+
+ my @all_excluded_cabfiles = ();
+
+ if( $^O =~ /cygwin/i )
+ {
+ $msidatabase = qx{cygpath -w "$msidatabase"};
+ $msidatabase =~ s/\\/\\\\/g;
+ $msidatabase =~ s/\s*$//g;
+ }
+ else
+ {
+ # msidb.exe really wants backslashes. (And double escaping because system() expands the string.)
+ $msidatabase =~ s/\//\\\\/g;
+ }
+
+ foreach my $onefile ( keys %{$allcabfiles} )
+ {
+ my $systemcall = $msidb . " -d " . $msidatabase . " -x " . $onefile;
+ system($systemcall);
+ push(@all_excluded_cabfiles, $onefile);
+ }
+
+ \@all_excluded_cabfiles;
+}
+
+################################################################################
+# Collect all DiskIds to the corresponding cabinet files from Media.idt.
+################################################################################
+
+sub analyze_media_file
+{
+ my ($filecontent) = @_;
+
+ my %diskidhash = ();
+
+ for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+ {
+ if ( $i < 3 ) { next; }
+
+ if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\s*$/ )
+ {
+ my $diskid = $1;
+ my $cabfile = $4;
+
+ $diskidhash{$cabfile} = $diskid;
+ }
+ }
+
+ return \%diskidhash;
+}
+
+################################################################################
+# Analyzing the content of Directory.idt
+#################################################################################
+
+sub analyze_directory_file
+{
+ my ($filecontent) = @_;
+
+ my %table = ();
+
+ for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+ {
+ if (( $i == 0 ) || ( $i == 1 ) || ( $i == 2 )) { next; }
+
+ if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\s*$/ )
+ {
+ my $dir = $1;
+ my $parent = $2;
+ my $name = $3;
+
+ if ( $name =~ /^\s*(.*?)\s*\:\s*(.*?)\s*$/ ) { $name = $2; }
+ if ( $name =~ /^\s*(.*?)\s*\|\s*(.*?)\s*$/ ) { $name = $2; }
+
+ my %helphash = ();
+ $helphash{'Directory_Parent'} = $parent;
+ $helphash{'DefaultDir'} = $name;
+ $table{$dir} = \%helphash;
+ }
+ }
+
+ return \%table;
+}
+
+#################################################################################
+# Analyzing the content of Component.idt
+#################################################################################
+
+sub analyze_component_file
+{
+ my ($filecontent) = @_;
+
+ my %table = ();
+
+ for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+ {
+ if (( $i == 0 ) || ( $i == 1 ) || ( $i == 2 )) { next; }
+
+ if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\s*$/ )
+ {
+ my $component = $1;
+ my $dir = $3;
+
+ $table{$component} = $dir;
+ }
+ }
+
+ return \%table;
+}
+
+#################################################################################
+# Analyzing the content of File.idt
+#################################################################################
+
+sub analyze_file_file
+{
+ my ($filecontent) = @_;
+
+ my %table = ();
+ my %fileorder = ();
+ my $maxsequence = 0;
+
+ for ( my $i = 0; $i <= $#{$filecontent}; $i++ )
+ {
+ if (( $i == 0 ) || ( $i == 1 ) || ( $i == 2 )) { next; }
+
+ if ( ${$filecontent}[$i] =~ /^\s*(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\t(.*?)\s*$/ )
+ {
+ my $file = $1;
+ my $comp = $2;
+ my $filename = $3;
+ my $sequence = $8;
+
+ if ( $filename =~ /^\s*(.*?)\s*\|\s*(.*?)\s*$/ ) { $filename = $2; }
+
+ my %helphash = ();
+ $helphash{'Component'} = $comp;
+ $helphash{'FileName'} = $filename;
+ $helphash{'Sequence'} = $sequence;
+
+ $table{$file} = \%helphash;
+
+ $fileorder{$sequence} = $file;
+
+ if ( $sequence > $maxsequence ) { $maxsequence = $sequence; }
+ }
+ }
+
+ return (\%table, \%fileorder, $maxsequence);
+}
+
+####################################################################################
+# Recursively creating the directory tree
+####################################################################################
+
+sub create_directory_tree
+{
+ my ($parent, $pathcollector, $fulldir, $dirhash) = @_;
+
+ foreach my $dir ( keys %{$dirhash} )
+ {
+ if (( $dirhash->{$dir}->{'Directory_Parent'} eq $parent ) && ( $dirhash->{$dir}->{'DefaultDir'} ne "." ))
+ {
+ my $dirname = $dirhash->{$dir}->{'DefaultDir'};
+ # Create the directory
+ my $newdir = $fulldir . $separator . $dirname;
+ if ( ! -f $newdir ) { mkdir $newdir; }
+ # Saving in collector
+ $pathcollector->{$dir} = $newdir;
+ # Iteration
+ create_directory_tree($dir, $pathcollector, $newdir, $dirhash);
+ }
+ }
+}
+
+####################################################################################
+# Creating the directory tree
+####################################################################################
+
+sub create_directory_structure
+{
+ my ($dirhash, $targetdir) = @_;
+
+ print "Creating directories\n";
+
+ my %fullpathhash = ();
+
+ my @startparents = ("TARGETDIR", "INSTALLLOCATION");
+
+ foreach $dir (@startparents) { create_directory_tree($dir, \%fullpathhash, $targetdir, $dirhash); }
+
+ # Also adding the paths of the startparents
+ foreach $dir (@startparents)
+ {
+ if ( ! exists($fullpathhash{$dir}) ) { $fullpathhash{$dir} = $targetdir; }
+ }
+
+ return \%fullpathhash;
+}
+
+####################################################################################
+# Cygwin: Setting privileges for files
+####################################################################################
+
+sub change_privileges
+{
+ my ($destfile, $privileges) = @_;
+
+ my $localcall = "chmod $privileges " . "\"" . $destfile . "\"";
+ system($localcall);
+}
+
+####################################################################################
+# Cygwin: Setting privileges for files recursively
+####################################################################################
+
+sub change_privileges_full
+{
+ my ($target) = @_;
+
+ print "Changing privileges\n";
+
+ my $localcall = "chmod -R 755 " . "\"" . $target . "\"";
+ system($localcall);
+}
+
+######################################################
+# Creating a new directory with defined privileges
+######################################################
+
+sub create_directory_with_privileges
+{
+ my ($directory, $privileges) = @_;
+
+ my $returnvalue = 1;
+ my $infoline = "";
+
+ if (!(-d $directory))
+ {
+ my $localprivileges = oct("0".$privileges); # changes "777" to 0777
+ $returnvalue = mkdir($directory, $localprivileges);
+
+ if ($returnvalue)
+ {
+ my $localcall = "chmod $privileges $directory \>\/dev\/null 2\>\&1";
+ system($localcall);
+ }
+ }
+ else
+ {
+ my $localcall = "chmod $privileges $directory \>\/dev\/null 2\>\&1";
+ system($localcall);
+ }
+}
+
+######################################################
+# Creating a unique directory with pid extension
+######################################################
+
+sub create_pid_directory
+{
+ my ($directory) = @_;
+
+ $directory =~ s/\Q$separator\E\s*$//;
+ my $pid = $$; # process id
+ my $time = time(); # time
+
+ $directory = $directory . "_" . $pid . $time;
+
+ if ( ! -d $directory ) { create_directory($directory); }
+ else { exit_program("ERROR: Directory $directory already exists!"); }
+
+ return $directory;
+}
+
+####################################################################################
+# Copying files into installation set
+####################################################################################
+
+sub copy_files_into_directory_structure
+{
+ my ($fileorder, $filehash, $componenthash, $fullpathhash, $maxsequence, $unpackdir, $installdir, $dirhash) = @_;
+
+ print "Copying files\n";
+
+ for ( my $i = 1; $i <= $maxsequence; $i++ )
+ {
+ if ( exists($fileorder->{$i}) )
+ {
+ my $file = $fileorder->{$i};
+ if ( ! exists($filehash->{$file}->{'Component'}) ) { exit_program("ERROR: Did not find component for file: \"$file\"."); }
+ my $component = $filehash->{$file}->{'Component'};
+ if ( ! exists($componenthash->{$component}) ) { exit_program("ERROR: Did not find directory for component: \"$component\"."); }
+ my $dirname = $componenthash->{$component};
+ if ( ! exists($fullpathhash->{$dirname}) ) { exit_program("ERROR: Did not find full directory path for dir: \"$dirname\"."); }
+ my $destdir = $fullpathhash->{$dirname};
+ if ( ! exists($filehash->{$file}->{'FileName'}) ) { exit_program("ERROR: Did not find \"FileName\" for file: \"$file\"."); }
+ my $destfile = $filehash->{$file}->{'FileName'};
+
+ $destfile = $destdir . $separator . $destfile;
+ my $sourcefile = $unpackdir . $separator . $file;
+
+ if ( ! -f $sourcefile )
+ {
+ # It is possible, that this was an unpacked file
+ # Looking in the dirhash, to find the subdirectory in the installation set (the id is $dirname)
+ # subdir is not recursively analyzed, only one directory.
+
+ my $oldsourcefile = $sourcefile;
+ my $subdir = "";
+ if ( exists($dirhash->{$dirname}->{'DefaultDir'}) ) { $subdir = $dirhash->{$dirname}->{'DefaultDir'} . $separator; }
+ my $realfilename = $filehash->{$file}->{'FileName'};
+ my $localinstalldir = $installdir;
+
+ $localinstalldir =~ s/\\\s*$//;
+ $localinstalldir =~ s/\/\s*$//;
+
+ $sourcefile = $localinstalldir . $separator . $subdir . $realfilename;
+
+ if ( ! -f $sourcefile ) { exit_program("ERROR: File not found: \"$oldsourcefile\" (or \"$sourcefile\")."); }
+ }
+
+ my $copyreturn = copy($sourcefile, $destfile);
+
+ if ( ! $copyreturn) { exit_program("ERROR: Could not copy $source to $dest\n"); }
+
+ # if (( $^O =~ /cygwin/i ) && ( $destfile =~ /\.exe\s*$/ )) { change_privileges($destfile, "775"); }
+ }
+ # else # allowing missing sequence numbers ?
+ # {
+ # exit_program("ERROR: No file assigned to sequence $i");
+ # }
+ }
+}
+
+######################################################
+# Removing a complete directory with subdirectories
+######################################################
+
+sub remove_complete_directory
+{
+ my ($directory, $start) = @_;
+
+ my @content = ();
+ my $infoline = "";
+
+ $directory =~ s/\Q$separator\E\s*$//;
+
+ if ( -d $directory )
+ {
+ if ( $start ) { print "Removing directory $directory\n"; }
+
+ opendir(DIR, $directory);
+ @content = readdir(DIR);
+ closedir(DIR);
+
+ my $oneitem;
+
+ foreach $oneitem (@content)
+ {
+ if ((!($oneitem eq ".")) && (!($oneitem eq "..")))
+ {
+ my $item = $directory . $separator . $oneitem;
+
+ if ( -f $item || -l $item ) # deleting files or links
+ {
+ unlink($item);
+ }
+
+ if ( -d $item ) # recursive
+ {
+ remove_complete_directory($item, 0);
+ }
+ }
+ }
+
+ # try to remove empty directory
+ my $returnvalue = rmdir $directory;
+ if ( ! $returnvalue ) { print "Warning: Problem with removing empty dir $directory\n"; }
+ }
+}
+
+####################################################################################
+# Defining a temporary path
+####################################################################################
+
+sub get_temppath
+{
+ my $temppath = "";
+
+ if (( $ENV{'TMP'} ) || ( $ENV{'TEMP'} ))
+ {
+ if ( $ENV{'TMP'} ) { $temppath = $ENV{'TMP'}; }
+ elsif ( $ENV{'TEMP'} ) { $temppath = $ENV{'TEMP'}; }
+
+ $temppath =~ s/\Q$separator\E\s*$//; # removing ending slashes and backslashes
+ $temppath = $temppath . $separator . $globaltempdirname;
+ $temppath = mkdtemp($temppath);
+
+ my $dirsave = $temppath;
+
+ $temppath = $temppath . $separator . "a";
+ $temppath = create_pid_directory($temppath);
+
+ if ( ! -d $temppath ) { exit_program("ERROR: Failed to create directory $temppath ! Possible reason: Wrong privileges in directory $dirsave."); }
+
+ if ( $^O =~ /cygwin/i )
+ {
+ $temppath =~ s/\\/\\\\/g;
+ chomp( $temppath = qx{cygpath -w "$temppath"} );
+ }
+
+ $savetemppath = $temppath;
+ }
+ else
+ {
+ exit_program("ERROR: Could not set temporary directory (TMP and TEMP not set!).");
+ }
+
+ return $temppath;
+}
+
+####################################################################################
+# Reading one file
+####################################################################################
+
+sub read_file
+{
+ my ($localfile) = @_;
+
+ my @localfile = ();
+
+ open( IN, "<$localfile" ) || exit_program("ERROR: Cannot open file $localfile for reading");
+
+ # Don't use "my @localfile = <IN>" here, because
+ # perl has a problem with the internal "large_and_huge_malloc" function
+ # when calling perl using MacOS 10.5 with a perl built with MacOS 10.4
+ while ( $line = <IN> ) {
+ push @localfile, $line;
+ }
+
+ close( IN );
+
+ return \@localfile;
+}
+
+###############################################################
+# Setting the time string for the
+# Summary Information stream in the
+# msi database of the admin installations.
+###############################################################
+
+sub get_sis_time_string
+{
+ # Syntax: <yyyy/mm/dd hh:mm:ss>
+ my $second = (localtime())[0];
+ my $minute = (localtime())[1];
+ my $hour = (localtime())[2];
+ my $day = (localtime())[3];
+ my $month = (localtime())[4];
+ my $year = 1900 + (localtime())[5];
+ $month++;
+
+ if ( $second < 10 ) { $second = "0" . $second; }
+ if ( $minute < 10 ) { $minute = "0" . $minute; }
+ if ( $hour < 10 ) { $hour = "0" . $hour; }
+ if ( $day < 10 ) { $day = "0" . $day; }
+ if ( $month < 10 ) { $month = "0" . $month; }
+
+ my $timestring = $year . "/" . $month . "/" . $day . " " . $hour . ":" . $minute . ":" . $second;
+
+ return $timestring;
+}
+
+###############################################################
+# Writing content of administrative installations into
+# Summary Information Stream of msi database.
+# This is required for example for following
+# patch processes using Windows Installer service.
+###############################################################
+
+sub write_sis_info
+{
+ my ($msidatabase) = @_;
+
+ print "Setting SIS in msi database\n";
+
+ if ( ! -f $msidatabase ) { exit_program("ERROR: Cannot find file $msidatabase"); }
+
+ my $msiinfo = "msiinfo.exe"; # Has to be in the path
+ my $infoline = "";
+ my $systemcall = "";
+ my $returnvalue = "";
+
+ # Required setting for administrative installations:
+ # -w 4 (source files are unpacked), wordcount
+ # -s <date of admin installation>, LastPrinted, Syntax: <yyyy/mm/dd hh:mm:ss>
+ # -l <person_making_admin_installation>, LastSavedBy
+
+ my $wordcount = 4; # Unpacked files
+ my $lastprinted = get_sis_time_string();
+ my $lastsavedby = "Installer";
+
+ my $localmsidatabase = $msidatabase;
+
+ if( $^O =~ /cygwin/i )
+ {
+ $localmsidatabase = qx{cygpath -w "$localmsidatabase"};
+ $localmsidatabase =~ s/\\/\\\\/g;
+ $localmsidatabase =~ s/\s*$//g;
+ }
+
+ $systemcall = $msiinfo . " " . "\"" . $localmsidatabase . "\"" . " -w " . $wordcount . " -s " . "\"" . $lastprinted . "\"" . " -l $lastsavedby";
+
+ $returnvalue = system($systemcall);
+
+ if ($returnvalue)
+ {
+ $infoline = "ERROR: Could not execute $systemcall !\n";
+ exit_program($infoline);
+ }
+}
+
+###############################################################
+# Convert time string
+###############################################################
+
+sub convert_timestring
+{
+ my ($secondstring) = @_;
+
+ my $timestring = "";
+
+ if ( $secondstring < 60 ) # less than a minute
+ {
+ if ( $secondstring < 10 ) { $secondstring = "0" . $secondstring; }
+ $timestring = "00\:$secondstring min\.";
+ }
+ elsif ( $secondstring < 3600 )
+ {
+ my $minutes = $secondstring / 60;
+ my $seconds = $secondstring % 60;
+ if ( $minutes =~ /(\d*)\.\d*/ ) { $minutes = $1; }
+ if ( $minutes < 10 ) { $minutes = "0" . $minutes; }
+ if ( $seconds < 10 ) { $seconds = "0" . $seconds; }
+ $timestring = "$minutes\:$seconds min\.";
+ }
+ else # more than one hour
+ {
+ my $hours = $secondstring / 3600;
+ my $secondstring = $secondstring % 3600;
+ my $minutes = $secondstring / 60;
+ my $seconds = $secondstring % 60;
+ if ( $hours =~ /(\d*)\.\d*/ ) { $hours = $1; }
+ if ( $minutes =~ /(\d*)\.\d*/ ) { $minutes = $1; }
+ if ( $hours < 10 ) { $hours = "0" . $hours; }
+ if ( $minutes < 10 ) { $minutes = "0" . $minutes; }
+ if ( $seconds < 10 ) { $seconds = "0" . $seconds; }
+ $timestring = "$hours\:$minutes\:$seconds hours";
+ }
+
+ return $timestring;
+}
+
+###############################################################
+# Returning time string for logging
+###############################################################
+
+sub get_time_string
+{
+ my $currenttime = time();
+ $currenttime = $currenttime - $starttime;
+ $currenttime = convert_timestring($currenttime);
+ $currenttime = localtime() . " \(" . $currenttime . "\)\n";
+ return $currenttime;
+}
+
+####################################################################################
+# Simulating an administrative installation
+####################################################################################
+
+$starttime = time();
+
+getparameter();
+controlparameter();
+check_local_msidb();
+check_system_path();
+my $temppath = get_temppath();
+
+print("\nmsi database: $databasepath\n");
+print("Destination directory: $targetdir\n" );
+
+my $helperdir = $temppath . $separator . "installhelper";
+create_directory($helperdir);
+
+# Get File.idt, Component.idt and Directory.idt from database
+
+my $tablelist = "File Directory Component Media CustomAction";
+extract_tables_from_database($databasepath, $helperdir, $tablelist);
+
+# Set unpackdir
+my $unpackdir = $helperdir . $separator . "unpack";
+create_directory($unpackdir);
+
+# Reading media table to check for internal cabinet files
+my $filename = $helperdir . $separator . "Media.idt";
+if ( ! -f $filename ) { exit_program("ERROR: Could not find required file: $filename !"); }
+my $filecontent = read_file($filename);
+my $cabfilehash = analyze_media_file($filecontent);
+
+# Check, if there are internal cab files
+my ( $contains_internal_cabfiles, $all_internal_cab_files) = check_for_internal_cabfiles($cabfilehash);
+
+if ( $contains_internal_cabfiles )
+{
+ # Set unpackdir
+ my $cabdir = $helperdir . $separator . "internal_cabs";
+ create_directory($cabdir);
+ my $from = cwd();
+ chdir($cabdir);
+ # Exclude all cabinet files from database
+ my $all_excluded_cabs = extract_cabs_from_database($databasepath, $all_internal_cab_files);
+ print "Unpacking files from internal cabinet file(s)\n";
+ foreach my $cabfile ( @{$all_excluded_cabs} ) { unpack_cabinet_file($cabfile, $unpackdir); }
+ chdir($from);
+}
+
+# Unpack all cab files into $helperdir, cab files must be located next to msi database
+my $installdir = $databasepath;
+
+get_path_from_fullqualifiedname(\$installdir);
+
+my $databasefilename = $databasepath;
+make_absolute_filename_to_relative_filename(\$databasefilename);
+
+my $cabfiles = find_file_with_file_extension("cab", $installdir);
+
+if (( $#{$cabfiles} < 0 ) && ( ! $contains_internal_cabfiles )) { exit_program("ERROR: Did not find any cab file in directory $installdir"); }
+
+print "Unpacking files from cabinet file(s)\n";
+for ( my $i = 0; $i <= $#{$cabfiles}; $i++ )
+{
+ my $cabfile = $installdir . $separator . ${$cabfiles}[$i];
+ unpack_cabinet_file($cabfile, $unpackdir);
+}
+
+# Reading tables
+$filename = $helperdir . $separator . "Directory.idt";
+$filecontent = read_file($filename);
+my $dirhash = analyze_directory_file($filecontent);
+
+$filename = $helperdir . $separator . "Component.idt";
+$filecontent = read_file($filename);
+my $componenthash = analyze_component_file($filecontent);
+
+$filename = $helperdir . $separator . "File.idt";
+$filecontent = read_file($filename);
+my ( $filehash, $fileorder, $maxsequence ) = analyze_file_file($filecontent);
+
+# Creating the directory structure
+my $fullpathhash = create_directory_structure($dirhash, $targetdir);
+
+# Copying files
+copy_files_into_directory_structure($fileorder, $filehash, $componenthash, $fullpathhash, $maxsequence, $unpackdir, $installdir, $dirhash);
+if ( $^O =~ /cygwin/i ) { change_privileges_full($targetdir); }
+
+my $msidatabase = $targetdir . $separator . $databasefilename;
+my $copyreturn = copy($databasepath, $msidatabase);
+if ( ! $copyreturn) { exit_program("ERROR: Could not copy $source to $dest\n"); }
+
+# Saving info in Summary Information Stream of msi database (required for following patches)
+if ( $msiinfo_available ) { write_sis_info($msidatabase); }
+
+# Removing the helper directory
+remove_complete_directory($temppath, 1);
+
+print "\nSuccessful installation: " . get_time_string();