Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 168 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-net-cdc_ncm b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
new file mode 100644
index 000000000..06416d0e1
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-net-cdc_ncm
@@ -0,0 +1,168 @@
+What:		/sys/class/net/<iface>/cdc_ncm/min_tx_pkt
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		The driver will pad NCM Transfer Blocks (NTBs) longer
+		than this to tx_max, allowing the device to receive
+		tx_max sized frames with no terminating short
+		packet. NTBs shorter than this limit are transmitted
+		as-is, without any padding, and are terminated with a
+		short USB packet.
+
+		Padding to tx_max allows the driver to transmit NTBs
+		back-to-back without any interleaving short USB
+		packets.  This reduces the number of short packet
+		interrupts in the device, and represents a tradeoff
+		between USB bus bandwidth and device DMA optimization.
+
+		Set to 0 to pad all frames. Set greater than tx_max to
+		disable all padding.
+
+What:		/sys/class/net/<iface>/cdc_ncm/ndp_to_end
+Date:		Dec 2015
+KernelVersion:	4.5
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Boolean attribute showing the status of the "NDP to
+		end" quirk.  Defaults to 'N', except for devices
+		already known to need it enabled.
+
+		The "NDP to end" quirk makes the driver place the NDP
+		(the packet index table) after the payload.  The NCM
+		specification does not mandate this, but some devices
+		are known to be more restrictive. Write 'Y' to this
+		attribute for temporary testing of a suspect device
+		failing to work with the default driver settings.
+
+		A device entry should be added to the driver if this
+		quirk is found to be required.
+
+What:		/sys/class/net/<iface>/cdc_ncm/rx_max
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		The maximum NTB size for RX.  Cannot exceed the
+		maximum value supported by the device. Must allow at
+		least one max sized datagram plus headers.
+
+		The actual limits are device dependent.  See
+		dwNtbInMaxSize.
+
+		Note: Some devices will silently ignore changes to
+		this value, resulting in oversized NTBs and
+		corresponding framing errors.
+
+What:		/sys/class/net/<iface>/cdc_ncm/tx_max
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		The maximum NTB size for TX.  Cannot exceed the
+		maximum value supported by the device.  Must allow at
+		least one max sized datagram plus headers.
+
+		The actual limits are device dependent.  See
+		dwNtbOutMaxSize.
+
+What:		/sys/class/net/<iface>/cdc_ncm/tx_timer_usecs
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Datagram aggregation timeout in µs. The driver will
+		wait up to 3 times this timeout for more datagrams to
+		aggregate before transmitting an NTB frame.
+
+		Valid range: 5 to 4000000
+
+		Set to 0 to disable aggregation.
+
+The following read-only attributes all represent fields of the
+structure defined in section 6.2.1 "GetNtbParameters" of "Universal
+Serial Bus Communications Class Subclass Specifications for Network
+Control Model Devices" (CDC NCM), Revision 1.0 (Errata 1), November
+24, 2010 from USB Implementers Forum, Inc.  The descriptions are
+quoted from table 6-3 of CDC NCM: "NTB Parameter Structure".
+
+What:		/sys/class/net/<iface>/cdc_ncm/bmNtbFormatsSupported
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		- Bit 0: 16-bit NTB supported (set to 1)
+		- Bit 1: 32-bit NTB supported
+		- Bits 2 – 15: reserved (reset to zero; must be ignored by host)
+
+What:		/sys/class/net/<iface>/cdc_ncm/dwNtbInMaxSize
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		IN NTB Maximum Size in bytes
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpInDivisor
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Divisor used for IN NTB Datagram payload alignment
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpInPayloadRemainder
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Remainder used to align input datagram payload within
+		the NTB: (Payload Offset) mod (wNdpInDivisor) =
+		wNdpInPayloadRemainder
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpInAlignment
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		NDP alignment modulus for NTBs on the IN pipe. Shall
+		be a power of 2, and shall be at least 4.
+
+What:		/sys/class/net/<iface>/cdc_ncm/dwNtbOutMaxSize
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		OUT NTB Maximum Size
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpOutDivisor
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		OUT NTB Datagram alignment modulus
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpOutPayloadRemainder
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Remainder used to align output datagram payload
+		offsets within the NTB: Padding, shall be transmitted
+		as zero by function, and ignored by host.  (Payload
+		Offset) mod (wNdpOutDivisor) = wNdpOutPayloadRemainder
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNdpOutAlignment
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		NDP alignment modulus for use in NTBs on the OUT
+		pipe. Shall be a power of 2, and shall be at least 4.
+
+What:		/sys/class/net/<iface>/cdc_ncm/wNtbOutMaxDatagrams
+Date:		May 2014
+KernelVersion:	3.16
+Contact:	Bjørn Mork <bjorn@mork.no>
+Description:
+		Maximum number of datagrams that the host may pack
+		into a single OUT NTB. Zero means that the device
+		imposes no limit.