Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 343 insertions, 0 deletions

diff --git a/Documentation/core-api/watch_queue.rst b/Documentation/core-api/watch_queue.rst
new file mode 100644
index 000000000..54f13ad5f
--- /dev/null
+++ b/Documentation/core-api/watch_queue.rst
@@ -0,0 +1,343 @@
+==============================
+General notification mechanism
+==============================
+
+The general notification mechanism is built on top of the standard pipe driver
+whereby it effectively splices notification messages from the kernel into pipes
+opened by userspace.  This can be used in conjunction with::
+
+  * Key/keyring notifications
+
+
+The notifications buffers can be enabled by:
+
+	"General setup"/"General notification queue"
+	(CONFIG_WATCH_QUEUE)
+
+This document has the following sections:
+
+.. contents:: :local:
+
+
+Overview
+========
+
+This facility appears as a pipe that is opened in a special mode.  The pipe's
+internal ring buffer is used to hold messages that are generated by the kernel.
+These messages are then read out by read().  Splice and similar are disabled on
+such pipes due to them wanting to, under some circumstances, revert their
+additions to the ring - which might end up interleaved with notification
+messages.
+
+The owner of the pipe has to tell the kernel which sources it would like to
+watch through that pipe.  Only sources that have been connected to a pipe will
+insert messages into it.  Note that a source may be bound to multiple pipes and
+insert messages into all of them simultaneously.
+
+Filters may also be emplaced on a pipe so that certain source types and
+subevents can be ignored if they're not of interest.
+
+A message will be discarded if there isn't a slot available in the ring or if
+no preallocated message buffer is available.  In both of these cases, read()
+will insert a WATCH_META_LOSS_NOTIFICATION message into the output buffer after
+the last message currently in the buffer has been read.
+
+Note that when producing a notification, the kernel does not wait for the
+consumers to collect it, but rather just continues on.  This means that
+notifications can be generated whilst spinlocks are held and also protects the
+kernel from being held up indefinitely by a userspace malfunction.
+
+
+Message Structure
+=================
+
+Notification messages begin with a short header::
+
+	struct watch_notification {
+		__u32	type:24;
+		__u32	subtype:8;
+		__u32	info;
+	};
+
+"type" indicates the source of the notification record and "subtype" indicates
+the type of record from that source (see the Watch Sources section below).  The
+type may also be "WATCH_TYPE_META".  This is a special record type generated
+internally by the watch queue itself.  There are two subtypes:
+
+  * WATCH_META_REMOVAL_NOTIFICATION
+  * WATCH_META_LOSS_NOTIFICATION
+
+The first indicates that an object on which a watch was installed was removed
+or destroyed and the second indicates that some messages have been lost.
+
+"info" indicates a bunch of things, including:
+
+  * The length of the message in bytes, including the header (mask with
+    WATCH_INFO_LENGTH and shift by WATCH_INFO_LENGTH__SHIFT).  This indicates
+    the size of the record, which may be between 8 and 127 bytes.
+
+  * The watch ID (mask with WATCH_INFO_ID and shift by WATCH_INFO_ID__SHIFT).
+    This indicates that caller's ID of the watch, which may be between 0
+    and 255.  Multiple watches may share a queue, and this provides a means to
+    distinguish them.
+
+  * A type-specific field (WATCH_INFO_TYPE_INFO).  This is set by the
+    notification producer to indicate some meaning specific to the type and
+    subtype.
+
+Everything in info apart from the length can be used for filtering.
+
+The header can be followed by supplementary information.  The format of this is
+at the discretion is defined by the type and subtype.
+
+
+Watch List (Notification Source) API
+====================================
+
+A "watch list" is a list of watchers that are subscribed to a source of
+notifications.  A list may be attached to an object (say a key or a superblock)
+or may be global (say for device events).  From a userspace perspective, a
+non-global watch list is typically referred to by reference to the object it
+belongs to (such as using KEYCTL_NOTIFY and giving it a key serial number to
+watch that specific key).
+
+To manage a watch list, the following functions are provided:
+
+  * ::
+
+	void init_watch_list(struct watch_list *wlist,
+			     void (*release_watch)(struct watch *wlist));
+
+    Initialise a watch list.  If ``release_watch`` is not NULL, then this
+    indicates a function that should be called when the watch_list object is
+    destroyed to discard any references the watch list holds on the watched
+    object.
+
+  * ``void remove_watch_list(struct watch_list *wlist);``
+
+    This removes all of the watches subscribed to a watch_list and frees them
+    and then destroys the watch_list object itself.
+
+
+Watch Queue (Notification Output) API
+=====================================
+
+A "watch queue" is the buffer allocated by an application that notification
+records will be written into.  The workings of this are hidden entirely inside
+of the pipe device driver, but it is necessary to gain a reference to it to set
+a watch.  These can be managed with:
+
+  * ``struct watch_queue *get_watch_queue(int fd);``
+
+    Since watch queues are indicated to the kernel by the fd of the pipe that
+    implements the buffer, userspace must hand that fd through a system call.
+    This can be used to look up an opaque pointer to the watch queue from the
+    system call.
+
+  * ``void put_watch_queue(struct watch_queue *wqueue);``
+
+    This discards the reference obtained from ``get_watch_queue()``.
+
+
+Watch Subscription API
+======================
+
+A "watch" is a subscription on a watch list, indicating the watch queue, and
+thus the buffer, into which notification records should be written.  The watch
+queue object may also carry filtering rules for that object, as set by
+userspace.  Some parts of the watch struct can be set by the driver::
+
+	struct watch {
+		union {
+			u32		info_id;	/* ID to be OR'd in to info field */
+			...
+		};
+		void			*private;	/* Private data for the watched object */
+		u64			id;		/* Internal identifier */
+		...
+	};
+
+The ``info_id`` value should be an 8-bit number obtained from userspace and
+shifted by WATCH_INFO_ID__SHIFT.  This is OR'd into the WATCH_INFO_ID field of
+struct watch_notification::info when and if the notification is written into
+the associated watch queue buffer.
+
+The ``private`` field is the driver's data associated with the watch_list and
+is cleaned up by the ``watch_list::release_watch()`` method.
+
+The ``id`` field is the source's ID.  Notifications that are posted with a
+different ID are ignored.
+
+The following functions are provided to manage watches:
+
+  * ``void init_watch(struct watch *watch, struct watch_queue *wqueue);``
+
+    Initialise a watch object, setting its pointer to the watch queue, using
+    appropriate barriering to avoid lockdep complaints.
+
+  * ``int add_watch_to_object(struct watch *watch, struct watch_list *wlist);``
+
+    Subscribe a watch to a watch list (notification source).  The
+    driver-settable fields in the watch struct must have been set before this
+    is called.
+
+  * ::
+
+	int remove_watch_from_object(struct watch_list *wlist,
+				     struct watch_queue *wqueue,
+				     u64 id, false);
+
+    Remove a watch from a watch list, where the watch must match the specified
+    watch queue (``wqueue``) and object identifier (``id``).  A notification
+    (``WATCH_META_REMOVAL_NOTIFICATION``) is sent to the watch queue to
+    indicate that the watch got removed.
+
+  * ``int remove_watch_from_object(struct watch_list *wlist, NULL, 0, true);``
+
+    Remove all the watches from a watch list.  It is expected that this will be
+    called preparatory to destruction and that the watch list will be
+    inaccessible to new watches by this point.  A notification
+    (``WATCH_META_REMOVAL_NOTIFICATION``) is sent to the watch queue of each
+    subscribed watch to indicate that the watch got removed.
+
+
+Notification Posting API
+========================
+
+To post a notification to watch list so that the subscribed watches can see it,
+the following function should be used::
+
+	void post_watch_notification(struct watch_list *wlist,
+				     struct watch_notification *n,
+				     const struct cred *cred,
+				     u64 id);
+
+The notification should be preformatted and a pointer to the header (``n``)
+should be passed in.  The notification may be larger than this and the size in
+units of buffer slots is noted in ``n->info & WATCH_INFO_LENGTH``.
+
+The ``cred`` struct indicates the credentials of the source (subject) and is
+passed to the LSMs, such as SELinux, to allow or suppress the recording of the
+note in each individual queue according to the credentials of that queue
+(object).
+
+The ``id`` is the ID of the source object (such as the serial number on a key).
+Only watches that have the same ID set in them will see this notification.
+
+
+Watch Sources
+=============
+
+Any particular buffer can be fed from multiple sources.  Sources include:
+
+  * WATCH_TYPE_KEY_NOTIFY
+
+    Notifications of this type indicate changes to keys and keyrings, including
+    the changes of keyring contents or the attributes of keys.
+
+    See Documentation/security/keys/core.rst for more information.
+
+
+Event Filtering
+===============
+
+Once a watch queue has been created, a set of filters can be applied to limit
+the events that are received using::
+
+	struct watch_notification_filter filter = {
+		...
+	};
+	ioctl(fd, IOC_WATCH_QUEUE_SET_FILTER, &filter)
+
+The filter description is a variable of type::
+
+	struct watch_notification_filter {
+		__u32	nr_filters;
+		__u32	__reserved;
+		struct watch_notification_type_filter filters[];
+	};
+
+Where "nr_filters" is the number of filters in filters[] and "__reserved"
+should be 0.  The "filters" array has elements of the following type::
+
+	struct watch_notification_type_filter {
+		__u32	type;
+		__u32	info_filter;
+		__u32	info_mask;
+		__u32	subtype_filter[8];
+	};
+
+Where:
+
+  * ``type`` is the event type to filter for and should be something like
+    "WATCH_TYPE_KEY_NOTIFY"
+
+  * ``info_filter`` and ``info_mask`` act as a filter on the info field of the
+    notification record.  The notification is only written into the buffer if::
+
+	(watch.info & info_mask) == info_filter
+
+    This could be used, for example, to ignore events that are not exactly on
+    the watched point in a mount tree.
+
+  * ``subtype_filter`` is a bitmask indicating the subtypes that are of
+    interest.  Bit 0 of subtype_filter[0] corresponds to subtype 0, bit 1 to
+    subtype 1, and so on.
+
+If the argument to the ioctl() is NULL, then the filters will be removed and
+all events from the watched sources will come through.
+
+
+Userspace Code Example
+======================
+
+A buffer is created with something like the following::
+
+	pipe2(fds, O_TMPFILE);
+	ioctl(fds[1], IOC_WATCH_QUEUE_SET_SIZE, 256);
+
+It can then be set to receive keyring change notifications::
+
+	keyctl(KEYCTL_WATCH_KEY, KEY_SPEC_SESSION_KEYRING, fds[1], 0x01);
+
+The notifications can then be consumed by something like the following::
+
+	static void consumer(int rfd, struct watch_queue_buffer *buf)
+	{
+		unsigned char buffer[128];
+		ssize_t buf_len;
+
+		while (buf_len = read(rfd, buffer, sizeof(buffer)),
+		       buf_len > 0
+		       ) {
+			void *p = buffer;
+			void *end = buffer + buf_len;
+			while (p < end) {
+				union {
+					struct watch_notification n;
+					unsigned char buf1[128];
+				} n;
+				size_t largest, len;
+
+				largest = end - p;
+				if (largest > 128)
+					largest = 128;
+				memcpy(&n, p, largest);
+
+				len = (n->info & WATCH_INFO_LENGTH) >>
+					WATCH_INFO_LENGTH__SHIFT;
+				if (len == 0 || len > largest)
+					return;
+
+				switch (n.n.type) {
+				case WATCH_TYPE_META:
+					got_meta(&n.n);
+				case WATCH_TYPE_KEY_NOTIFY:
+					saw_key_change(&n.n);
+					break;
+				}
+
+				p += len;
+			}
+		}
+	}