Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 185 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
new file mode 100644
index 000000000..c83245065
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/marvell/ap80x-system-controller.txt
@@ -0,0 +1,185 @@
+Marvell Armada AP80x System Controller
+======================================
+
+The AP806/AP807 is one of the two core HW blocks of the Marvell Armada
+7K/8K/931x SoCs. It contains system controllers, which provide several
+registers giving access to numerous features: clocks, pin-muxing and
+many other SoC configuration items. This DT binding allows to describe
+these system controllers.
+
+For the top level node:
+ - compatible: must be: "syscon", "simple-mfd";
+ - reg: register area of the AP80x system controller
+
+SYSTEM CONTROLLER 0
+===================
+
+Clocks:
+-------
+
+
+The Device Tree node representing the AP806/AP807 system controller
+provides a number of clocks:
+
+ - 0: reference clock of CPU cluster 0
+ - 1: reference clock of CPU cluster 1
+ - 2: fixed PLL at 1200 Mhz
+ - 3: MSS clock, derived from the fixed PLL
+
+Required properties:
+
+ - compatible: must be one of:
+   * "marvell,ap806-clock"
+   * "marvell,ap807-clock"
+ - #clock-cells: must be set to 1
+
+Pinctrl:
+--------
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt.
+
+Required properties:
+- compatible must be "marvell,ap806-pinctrl",
+
+Available mpp pins/groups and functions:
+Note: brackets (x) are not part of the mpp name for marvell,function and given
+only for more detailed description in this document.
+
+name	pins	functions
+================================================================================
+mpp0	0	gpio, sdio(clk), spi0(clk)
+mpp1	1	gpio, sdio(cmd), spi0(miso)
+mpp2	2	gpio, sdio(d0), spi0(mosi)
+mpp3	3	gpio, sdio(d1), spi0(cs0n)
+mpp4	4	gpio, sdio(d2), i2c0(sda)
+mpp5	5	gpio, sdio(d3), i2c0(sdk)
+mpp6	6	gpio, sdio(ds)
+mpp7	7	gpio, sdio(d4), uart1(rxd)
+mpp8	8	gpio, sdio(d5), uart1(txd)
+mpp9	9	gpio, sdio(d6), spi0(cs1n)
+mpp10	10	gpio, sdio(d7)
+mpp11	11	gpio, uart0(txd)
+mpp12	12	gpio, sdio(pw_off), sdio(hw_rst)
+mpp13	13	gpio
+mpp14	14	gpio
+mpp15	15	gpio
+mpp16	16	gpio
+mpp17	17	gpio
+mpp18	18	gpio
+mpp19	19	gpio, uart0(rxd), sdio(pw_off)
+
+GPIO:
+-----
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/gpio/gpio-mvebu.yaml.
+
+Required properties:
+
+- compatible: "marvell,armada-8k-gpio"
+
+- offset: offset address inside the syscon block
+
+Optional properties:
+
+- marvell,pwm-offset: offset address of PWM duration control registers inside
+  the syscon block
+
+Example:
+ap_syscon: system-controller@6f4000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x6f4000 0x1000>;
+
+	ap_clk: clock {
+		compatible = "marvell,ap806-clock";
+		#clock-cells = <1>;
+	};
+
+	ap_pinctrl: pinctrl {
+		compatible = "marvell,ap806-pinctrl";
+	};
+
+	ap_gpio: gpio {
+		compatible = "marvell,armada-8k-gpio";
+		offset = <0x1040>;
+		ngpios = <19>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&ap_pinctrl 0 0 19>;
+		marvell,pwm-offset = <0x10c0>;
+		#pwm-cells = <2>;
+		clocks = <&ap_clk 3>;
+	};
+};
+
+SYSTEM CONTROLLER 1
+===================
+
+Thermal:
+--------
+
+For common binding part and usage, refer to
+Documentation/devicetree/bindings/thermal/thermal*.yaml
+
+The thermal IP can probe the temperature all around the processor. It
+may feature several channels, each of them wired to one sensor.
+
+It is possible to setup an overheat interrupt by giving at least one
+critical point to any subnode of the thermal-zone node.
+
+Required properties:
+- compatible: must be one of:
+  * marvell,armada-ap806-thermal
+- reg: register range associated with the thermal functions.
+
+Optional properties:
+- interrupts: overheat interrupt handle. Should point to line 18 of the
+  SEI irqchip. See interrupt-controller/interrupts.txt
+- #thermal-sensor-cells: shall be <1> when thermal-zones subnodes refer
+  to this IP and represents the channel ID. There is one sensor per
+  channel. O refers to the thermal IP internal channel, while positive
+  IDs refer to each CPU.
+
+Example:
+ap_syscon1: system-controller@6f8000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	ap_thermal: thermal-sensor@80 {
+		compatible = "marvell,armada-ap806-thermal";
+		reg = <0x80 0x10>;
+		interrupt-parent = <&sei>;
+		interrupts = <18>;
+		#thermal-sensor-cells = <1>;
+	};
+};
+
+Cluster clocks:
+---------------
+
+Device Tree Clock bindings for cluster clock of Marvell
+AP806/AP807. Each cluster contain up to 2 CPUs running at the same
+frequency.
+
+Required properties:
+ - compatible: must be one of:
+   * "marvell,ap806-cpu-clock"
+   * "marvell,ap807-cpu-clock"
+- #clock-cells : should be set to 1.
+
+- clocks : shall be the input parent clock(s) phandle for the clock
+           (one per cluster)
+
+- reg: register range associated with the cluster clocks
+
+ap_syscon1: system-controller@6f8000 {
+	compatible = "marvell,armada-ap806-syscon1", "syscon", "simple-mfd";
+	reg = <0x6f8000 0x1000>;
+
+	cpu_clk: clock-cpu@278 {
+		compatible = "marvell,ap806-cpu-clock";
+		clocks = <&ap_clk 0>, <&ap_clk 1>;
+		#clock-cells = <1>;
+		reg = <0x278 0xa30>;
+	};
+};