Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 321 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
new file mode 100644
index 000000000..9a46cb1d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
@@ -0,0 +1,32 @@
+Binding for a ST multiplexed clock driver.
+
+This binding supports only simple indexed multiplexers, it does not
+support table based parent index to hardware value translations.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,stih407-clkgen-a9-mux"
+
+- #clock-cells : from common clock binding; shall be set to 0.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+Example:
+
+	clk_m_a9: clk-m-a9@92b0000 {
+		#clock-cells = <0>;
+		compatible = "st,stih407-clkgen-a9-mux";
+		reg = <0x92b0000 0x10000>;
+
+		clocks = <&clockgen_a9_pll 0>,
+			 <&clockgen_a9_pll 0>,
+			 <&clk_s_c0_flexgen 13>,
+			 <&clk_m_a9_ext2f_div2>;
+	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
new file mode 100644
index 000000000..d0fa1e02d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
@@ -0,0 +1,40 @@
+Binding for a ST pll clock driver.
+
+This binding uses the common clock binding[1].
+Base address is located to the parent node. See clock binding[2]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[2] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+
+Required properties:
+
+- compatible : shall be:
+	"st,clkgen-pll0"
+	"st,clkgen-pll0-a0"
+	"st,clkgen-pll0-c0"
+	"st,clkgen-pll1"
+	"st,clkgen-pll1-c0"
+	"st,stih407-clkgen-plla9"
+	"st,stih418-clkgen-plla9"
+
+- #clock-cells : From common clock binding; shall be set to 1.
+
+- clocks : From common clock binding
+
+- clock-output-names : From common clock binding.
+
+Example:
+
+	clockgen-a9@92b0000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x92b0000 0xffff>;
+
+		clockgen_a9_pll: clockgen-a9-pll {
+			#clock-cells = <1>;
+			compatible = "st,stih407-clkgen-plla9";
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clockgen-a9-pll-odf";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,clkgen.txt b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
new file mode 100644
index 000000000..45ac19bfa
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,clkgen.txt
@@ -0,0 +1,68 @@
+Binding for a Clockgen hardware block found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+A Clockgen node can contain pll, diviser or multiplexer nodes.
+
+We will find only the base address of the Clockgen, this base
+address is common of all subnode.
+
+	clockgen_node {
+		reg = <>;
+
+		pll_node {
+			...
+		};
+
+		quadfs_node {
+			...
+		};
+
+		mux_node {
+			...
+		};
+
+		flexgen_node {
+			...
+		};
+		...
+	};
+
+This binding uses the common clock binding[1].
+Each subnode should use the binding described in [2]..[7]
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
+[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
+[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
+[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
+
+
+Required properties:
+- reg : A Base address and length of the register set.
+
+Example:
+
+	clockgen-a@90ff000 {
+		compatible = "st,clkgen-c32";
+		reg = <0x90ff000 0x1000>;
+
+		clk_s_a0_pll: clk-s-a0-pll {
+			#clock-cells = <1>;
+			compatible = "st,clkgen-pll0";
+
+			clocks = <&clk_sysin>;
+
+			clock-output-names = "clk-s-a0-pll-ofd-0";
+		};
+
+		clk_s_a0_flexgen: clk-s-a0-flexgen {
+			compatible = "st,flexgen";
+
+			#clock-cells = <1>;
+
+			clocks = <&clk_s_a0_pll 0>,
+				 <&clk_sysin>;
+
+			clock-output-names = "clk-ic-lmi0";
+		};
+	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,flexgen.txt b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
new file mode 100644
index 000000000..c91807540
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,flexgen.txt
@@ -0,0 +1,133 @@
+Binding for a type of flexgen structure found on certain
+STMicroelectronics consumer electronics SoC devices
+
+This structure includes:
+- a clock cross bar (represented by a mux element)
+- a pre and final dividers (represented by a divider and gate elements)
+
+Flexgen structure is a part of Clockgen[1].
+
+Please find an example below:
+
+    Clockgen block diagram
+    -------------------------------------------------------------------
+   |                     Flexgen structure                             |
+   |                  ---------------------------------------------    |
+   |                 |    -------       --------       --------    |   |
+clk_sysin            |   |       |     |        |     |        |   |   |
+---|-----------------|-->|       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |Pre     |     |Final   |   |   |
+   | |  |PLL0   |    |   |       |     |Dividers|     |Dividers|   |   |
+   | |->|       |    |   |       |     |  x32   |     |  x32   |   |   |
+   | |  |  odf_0|----|-->|       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   | Clock |     |        |     |        |   |   |
+   | |  |PLL1   |    |   |       |     |        |     |        |   |   |
+   | |->|       |    |   | Cross |     |        |     |        |   |   |
+   | |  |  odf_0|----|-->|       |     |        |     |        | CLK_DIV[31:0]
+   | |  |       |    |   | Bar   |====>|        |====>|        |===|=========>
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |  |       |    |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |               |   |       |     |        |     |        |   |   |
+   | |   -------     |   |       |     |        |     |        |   |   |
+   | |  |QUADFS |    |   |       |     |        |     |        |   |   |
+   | |->|    ch0|----|-->|       |     |        |     |        |   |   |
+   |    |       |    |   |       |     |        |     |        |   |   |
+   |    |    ch1|----|-->|       |     |        |     |        |   |   |
+   |    |       |    |   |       |     |        |     |        |   |   |
+   |    |    ch2|----|-->|       |     | DIV    |     | DIV    |   |   |
+   |    |       |    |   |       |     |  1 to  |     |  1 to  |   |   |
+   |    |    ch3|----|-->|       |     |   1024 |     |     64 |   |   |
+   |     -------     |   |       |     |        |     |        |   |   |
+   |                 |    -------       --------       --------    |   |
+   |                   --------------------------------------------    |
+   |                                                                   |
+    -------------------------------------------------------------------
+
+This binding uses the common clock binding[2].
+
+[1] Documentation/devicetree/bindings/clock/st/st,clkgen.txt
+[2] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,flexgen"
+  "st,flexgen-audio", "st,flexgen" (enable clock propagation on parent for
+  audio use case)
+  "st,flexgen-video", "st,flexgen" (enable clock propagation on parent
+					and activate synchronous mode)
+  "st,flexgen-stih407-a0"
+  "st,flexgen-stih410-a0"
+  "st,flexgen-stih407-c0"
+  "st,flexgen-stih410-c0"
+  "st,flexgen-stih418-c0"
+  "st,flexgen-stih407-d0"
+  "st,flexgen-stih410-d0"
+  "st,flexgen-stih407-d2"
+  "st,flexgen-stih418-d2"
+  "st,flexgen-stih407-d3"
+
+- #clock-cells : from common clock binding; shall be set to 1 (multiple clock
+  outputs).
+
+- clocks : must be set to the parent's phandle. it could be output clocks of
+  a quadsfs or/and a pll or/and clk_sysin (up to 7 clocks)
+
+- clock-output-names : List of strings used to name the clock outputs.
+
+Example:
+
+	clk_s_c0_flexgen: clk-s-c0-flexgen {
+
+		#clock-cells = <1>;
+		compatible = "st,flexgen";
+
+		clocks = <&clk_s_c0_pll0 0>,
+			 <&clk_s_c0_pll1 0>,
+			 <&clk_s_c0_quadfs 0>,
+			 <&clk_s_c0_quadfs 1>,
+			 <&clk_s_c0_quadfs 2>,
+			 <&clk_s_c0_quadfs 3>,
+			 <&clk_sysin>;
+
+		clock-output-names = "clk-icn-gpu",
+				     "clk-fdma",
+				     "clk-nand",
+				     "clk-hva",
+				     "clk-proc-stfe",
+				     "clk-proc-tp",
+				     "clk-rx-icn-dmu",
+				     "clk-rx-icn-hva",
+				     "clk-icn-cpu",
+				     "clk-tx-icn-dmu",
+				     "clk-mmc-0",
+				     "clk-mmc-1",
+				     "clk-jpegdec",
+				     "clk-ext2fa9",
+				     "clk-ic-bdisp-0",
+				     "clk-ic-bdisp-1",
+				     "clk-pp-dmu",
+				     "clk-vid-dmu",
+				     "clk-dss-lpc",
+				     "clk-st231-aud-0",
+				     "clk-st231-gp-1",
+				     "clk-st231-dmu",
+				     "clk-icn-lmi",
+				     "clk-tx-icn-disp-1",
+				     "clk-icn-sbc",
+				     "clk-stfe-frc2",
+				     "clk-eth-phy",
+				     "clk-eth-ref-phyclk",
+				     "clk-flash-promip",
+				     "clk-main-disp",
+				     "clk-aux-disp",
+				     "clk-compo-dvp";
+	};
diff --git a/Documentation/devicetree/bindings/clock/st/st,quadfs.txt b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
new file mode 100644
index 000000000..c4ba2adb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/st/st,quadfs.txt
@@ -0,0 +1,48 @@
+Binding for a type of quad channel digital frequency synthesizer found on
+certain STMicroelectronics consumer electronics SoC devices.
+
+This version contains a programmable PLL which can generate up to 216, 432
+or 660MHz (from a 30MHz oscillator input) as the input to the digital
+synthesizers.
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be:
+  "st,quadfs"
+  "st,quadfs-d0"
+  "st,quadfs-d2"
+  "st,quadfs-d3"
+  "st,quadfs-pll"
+
+
+- #clock-cells : from common clock binding; shall be set to 1.
+
+- reg : A Base address and length of the register set.
+
+- clocks : from common clock binding
+
+- clock-output-names : From common clock binding. The block has 4
+                       clock outputs but not all of them in a specific instance
+                       have to be used in the SoC. If a clock name is left as
+                       an empty string then no clock will be created for the
+                       output associated with that string index. If fewer than
+                       4 strings are provided then no clocks will be created
+                       for the remaining outputs.
+
+Example:
+
+	clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+		#clock-cells = <1>;
+		compatible = "st,quadfs-pll";
+		reg = <0x9103000 0x1000>;
+
+		clocks = <&clk_sysin>;
+
+		clock-output-names = "clk-s-c0-fs0-ch0",
+				     "clk-s-c0-fs0-ch1",
+				     "clk-s-c0-fs0-ch2",
+				     "clk-s-c0-fs0-ch3";
+	};