Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 46 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
new file mode 100644
index 000000000..a5c1db95b
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/snps,archs-idu-intc.txt
@@ -0,0 +1,46 @@
+* ARC-HS Interrupt Distribution Unit
+
+  This optional 2nd level interrupt controller can be used in SMP configurations
+  for dynamic IRQ routing, load balancing of common/external IRQs towards core
+  intc.
+
+Properties:
+
+- compatible: "snps,archs-idu-intc"
+- interrupt-controller: This is an interrupt controller.
+- #interrupt-cells: Must be <1> or <2>.
+
+  Value of the first cell specifies the "common" IRQ from peripheral to IDU.
+  Number N of the particular interrupt line of IDU corresponds to the line N+24
+  of the core interrupt controller.
+
+  The (optional) second cell specifies any of the following flags:
+    - bits[3:0] trigger type and level flags
+        1 = low-to-high edge triggered
+        2 = NOT SUPPORTED (high-to-low edge triggered)
+        4 = active high level-sensitive <<< DEFAULT
+        8 = NOT SUPPORTED (active low level-sensitive)
+  When no second cell is specified, the interrupt is assumed to be level
+  sensitive.
+
+  The interrupt controller is accessed via the special ARC AUX register
+  interface, hence "reg" property is not specified.
+
+Example:
+	core_intc: core-interrupt-controller {
+		compatible = "snps,archs-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+	};
+
+	idu_intc: idu-interrupt-controller {
+		compatible = "snps,archs-idu-intc";
+		interrupt-controller;
+		interrupt-parent = <&core_intc>;
+		#interrupt-cells = <1>;
+	};
+
+	some_device: serial@c0fc1000 {
+		interrupt-parent = <&idu_intc>;
+		interrupts = <0>;	/* upstream idu IRQ #24 */
+	};