Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

5 files changed, 304 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
new file mode 100644
index 000000000..25f86da80
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-ibt-bmc.txt
@@ -0,0 +1,28 @@
+* Aspeed BT (Block Transfer) IPMI interface
+
+The Aspeed SOCs (AST2400 and AST2500) are commonly used as BMCs
+(BaseBoard Management Controllers) and the BT interface can be used to
+perform in-band IPMI communication with their host.
+
+Required properties:
+
+- compatible : should be one of
+	"aspeed,ast2400-ibt-bmc"
+	"aspeed,ast2500-ibt-bmc"
+	"aspeed,ast2600-ibt-bmc"
+- reg: physical address and size of the registers
+- clocks: clock for the device
+
+Optional properties:
+
+- interrupts: interrupt generated by the BT interface. without an
+  interrupt, the driver will operate in poll mode.
+
+Example:
+
+	ibt@1e789140 {
+		compatible = "aspeed,ast2400-ibt-bmc";
+		reg = <0x1e789140 0x18>;
+		interrupts = <8>;
+		clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+	};
diff --git a/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
new file mode 100644
index 000000000..4ff6fabfc
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/aspeed,ast2400-kcs-bmc.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/aspeed,ast2400-kcs-bmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED BMC KCS Devices
+
+maintainers:
+  - Andrew Jeffery <andrew@aj.id.au>
+
+description: |
+  The Aspeed BMC SoCs typically use the Keyboard-Controller-Style (KCS)
+  interfaces on the LPC bus for in-band IPMI communication with their host.
+
+properties:
+  compatible:
+    oneOf:
+      - description: Channel ID derived from reg
+        items:
+          enum:
+            - aspeed,ast2400-kcs-bmc-v2
+            - aspeed,ast2500-kcs-bmc-v2
+            - aspeed,ast2600-kcs-bmc
+
+      - description: Old-style with explicit channel ID, no reg
+        deprecated: true
+        items:
+          enum:
+            - aspeed,ast2400-kcs-bmc
+            - aspeed,ast2500-kcs-bmc
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    # maxItems: 3
+    items:
+      - description: IDR register
+      - description: ODR register
+      - description: STR register
+
+  aspeed,lpc-io-reg:
+    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    minItems: 1
+    maxItems: 2
+    description: |
+      The host CPU LPC IO data and status addresses for the device. For most
+      channels the status address is derived from the data address, but the
+      status address may be optionally provided.
+
+  aspeed,lpc-interrupts:
+    $ref: "/schemas/types.yaml#/definitions/uint32-array"
+    minItems: 2
+    maxItems: 2
+    description: |
+      A 2-cell property expressing the LPC SerIRQ number and the interrupt
+      level/sense encoding (specified in the standard fashion).
+
+      Note that the generated interrupt is issued from the BMC to the host, and
+      thus the target interrupt controller is not captured by the BMC's
+      devicetree.
+
+  kcs_chan:
+    deprecated: true
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: The LPC channel number in the controller
+
+  kcs_addr:
+    deprecated: true
+    $ref: '/schemas/types.yaml#/definitions/uint32'
+    description: The host CPU IO map address
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - aspeed,ast2400-kcs-bmc
+              - aspeed,ast2500-kcs-bmc
+    then:
+      required:
+        - kcs_chan
+        - kcs_addr
+    else:
+      required:
+        - reg
+        - aspeed,lpc-io-reg
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    kcs3: kcs@24 {
+        compatible = "aspeed,ast2600-kcs-bmc";
+        reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
+        aspeed,lpc-io-reg = <0xca2>;
+        aspeed,lpc-interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+        interrupts = <8>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
new file mode 100644
index 000000000..71bc031c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-ipmb.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ipmi-ipmb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IPMI IPMB device bindings
+
+description: IPMI IPMB device bindings
+
+maintainers:
+  - Corey Minyard <cminyard@mvista.com>
+
+properties:
+  compatible:
+    enum:
+      - ipmi-ipmb
+
+  device_type:
+    items:
+      - const: "ipmi"
+
+  reg:
+    maxItems: 1
+
+  bmcaddr:
+    $ref: /schemas/types.yaml#/definitions/uint8
+    description: The address of the BMC on the IPMB bus.  Defaults to 0x20.
+
+  retry-time:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+      Time between retries of sends, in milliseconds.  Defaults to 250.
+
+  max-retries:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: Number of retries before a failure is declared.  Defaults to 1.
+
+  slave-dev:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      The slave i2c device.  If not present, the main device is used. This
+      lets you use two devices on the IPMB, one for master and one for slave,
+      in case you have a slave device that can only be a slave.  The slave
+      will receive messages and the master will transmit.
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            ipmi-ipmb@40 {
+                    compatible = "ipmi-ipmb";
+                    device_type = "ipmi";
+                    reg = <0x40>;
+                    bmcaddr = /bits/ 8 <0x20>;
+                    retry-time = <250>;
+                    max-retries = <1>;
+            };
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
new file mode 100644
index 000000000..898e32678
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/ipmi-smic.yaml
@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ipmi/ipmi-smic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: IPMI device bindings
+
+description: IPMI device bindings
+
+maintainers:
+  - Corey Minyard <cminyard@mvista.com>
+
+properties:
+  compatible:
+    enum:
+      - ipmi-kcs
+      - ipmi-smic
+      - ipmi-bt
+
+  device_type:
+    items:
+      - const: "ipmi"
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: Interface is polled if this property is omitted.
+    maxItems: 1
+
+  reg-size:
+    description: The access width of the register in bytes. Defaults to 1.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 2, 4, 8]
+
+  reg-spacing:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: The number of bytes between register starts. Defaults to 1.
+
+  reg-shift:
+    description: |
+      The amount of bits to shift the register content to the right to get
+      the data into bit zero.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 56
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    smic@fff3a000 {
+        compatible = "ipmi-smic";
+        device_type = "ipmi";
+        reg = <0xfff3a000 0x1000>;
+        interrupts = <0 24 4>;
+        reg-size = <4>;
+        reg-spacing = <4>;
+    };
diff --git a/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
new file mode 100644
index 000000000..4fda76e63
--- /dev/null
+++ b/Documentation/devicetree/bindings/ipmi/npcm7xx-kcs-bmc.txt
@@ -0,0 +1,40 @@
+* Nuvoton NPCM KCS (Keyboard Controller Style) IPMI interface
+
+The Nuvoton SOCs (NPCM) are commonly used as BMCs
+(Baseboard Management Controllers) and the KCS interface can be
+used to perform in-band IPMI communication with their host.
+
+Required properties:
+- compatible : should be one of
+    "nuvoton,npcm750-kcs-bmc"
+    "nuvoton,npcm845-kcs-bmc", "nuvoton,npcm750-kcs-bmc"
+- interrupts : interrupt generated by the controller
+- kcs_chan : The KCS channel number in the controller
+
+Example:
+
+    lpc_kcs: lpc_kcs@f0007000 {
+        compatible = "nuvoton,npcm750-lpc-kcs", "simple-mfd", "syscon";
+        reg = <0xf0007000 0x40>;
+        reg-io-width = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0xf0007000 0x40>;
+
+        kcs1: kcs1@0 {
+            compatible = "nuvoton,npcm750-kcs-bmc";
+            reg = <0x0 0x40>;
+            interrupts = <0 9 4>;
+            kcs_chan = <1>;
+            status = "disabled";
+        };
+
+        kcs2: kcs2@0 {
+            compatible = "nuvoton,npcm750-kcs-bmc";
+            reg = <0x0 0x40>;
+            interrupts = <0 9 4>;
+            kcs_chan = <2>;
+            status = "disabled";
+        };
+    };