Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 170 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
new file mode 100644
index 000000000..308485a8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/marvell,nci.yaml
@@ -0,0 +1,170 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/nfc/marvell,nci.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Marvell International Ltd. NCI NFC controller
+
+maintainers:
+  - Krzysztof Kozlowski <krzk@kernel.org>
+
+properties:
+  compatible:
+    enum:
+      - marvell,nfc-i2c
+      - marvell,nfc-spi
+      - marvell,nfc-uart
+
+  hci-muxed:
+    type: boolean
+    description: |
+      Specifies that the chip is muxing NCI over HCI frames
+
+  interrupts:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+  reset-n-io:
+    $ref: "/schemas/types.yaml#/definitions/phandle-array"
+    maxItems: 1
+    description: |
+      Output GPIO pin used to reset the chip (active low)
+
+  i2c-int-falling:
+    type: boolean
+    description: |
+      For I2C type of connection. Specifies that the chip read event shall be
+      trigged on falling edge.
+
+  i2c-int-rising:
+    type: boolean
+    description: |
+      For I2C type of connection.  Specifies that the chip read event shall be
+      trigged on rising edge.
+
+  break-control:
+    type: boolean
+    description: |
+      For UART type of connection. Specifies that the chip needs specific break
+      management.
+
+  flow-control:
+    type: boolean
+    description: |
+      For UART type of connection. Specifies that the chip is using RTS/CTS.
+
+  spi-cpha: true
+  spi-cpol: true
+
+required:
+  - compatible
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,nfc-i2c
+    then:
+      properties:
+        break-control: false
+        flow-control: false
+        spi-cpha: false
+        spi-cpol: false
+        spi-max-frequency: false
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,nfc-spi
+    then:
+      $ref: /schemas/spi/spi-peripheral-props.yaml#
+      properties:
+        break-control: false
+        flow-control: false
+        i2c-int-falling: false
+        i2c-int-rising: false
+      required:
+        - reg
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: marvell,nfc-uart
+    then:
+      properties:
+        i2c-int-falling: false
+        i2c-int-rising: false
+        interrupts: false
+        spi-cpha: false
+        spi-cpol: false
+        spi-max-frequency: false
+        reg: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@8 {
+            compatible = "marvell,nfc-i2c";
+            reg = <0x8>;
+
+            interrupt-parent = <&gpio3>;
+            interrupts = <21 IRQ_TYPE_EDGE_RISING>;
+
+            i2c-int-rising;
+
+            reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        nfc@0 {
+            compatible = "marvell,nfc-spi";
+            reg = <0>;
+
+            spi-max-frequency = <3000000>;
+            spi-cpha;
+            spi-cpol;
+
+            interrupt-parent = <&gpio1>;
+            interrupts = <17 IRQ_TYPE_EDGE_RISING>;
+
+            reset-n-io = <&gpio3 19 GPIO_ACTIVE_LOW>;
+        };
+    };
+
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    uart {
+        nfc {
+            compatible = "marvell,nfc-uart";
+
+            reset-n-io = <&gpio3 16 GPIO_ACTIVE_LOW>;
+
+            hci-muxed;
+            flow-control;
+        };
+    };