Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 111 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/qcom-emac.txt b/Documentation/devicetree/bindings/net/qcom-emac.txt
new file mode 100644
index 000000000..7ae8aa148
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/qcom-emac.txt
@@ -0,0 +1,111 @@
+Qualcomm Technologies EMAC Gigabit Ethernet Controller
+
+This network controller consists of two devices: a MAC and an SGMII
+internal PHY.  Each device is represented by a device tree node.  A phandle
+connects the MAC node to its corresponding internal phy node.  Another
+phandle points to the external PHY node.
+
+Required properties:
+
+MAC node:
+- compatible : Should be "qcom,fsm9900-emac".
+- reg : Offset and length of the register regions for the device
+- interrupts : Interrupt number used by this controller
+- mac-address : The 6-byte MAC address. If present, it is the default
+	MAC address.
+- internal-phy : phandle to the internal PHY node
+- phy-handle : phandle to the external PHY node
+
+Internal PHY node:
+- compatible : Should be "qcom,fsm9900-emac-sgmii" or "qcom,qdf2432-emac-sgmii".
+- reg : Offset and length of the register region(s) for the device
+- interrupts : Interrupt number used by this controller
+
+The external phy child node:
+- reg : The phy address
+
+Example:
+
+FSM9900:
+
+soc {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	emac0: ethernet@feb20000 {
+		compatible = "qcom,fsm9900-emac";
+		reg = <0xfeb20000 0x10000>,
+		      <0xfeb36000 0x1000>;
+		interrupts = <76>;
+
+		clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>,
+			<&gcc 6>, <&gcc 7>;
+		clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk",
+			"mdio_clk", "tx_clk", "rx_clk", "sys_clk";
+
+		internal-phy = <&emac_sgmii>;
+
+		phy-handle = <&phy0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&mdio_pins_a>;
+	};
+
+	emac_sgmii: ethernet@feb38000 {
+		compatible = "qcom,fsm9900-emac-sgmii";
+		reg = <0xfeb38000 0x1000>;
+		interrupts = <80>;
+	};
+
+	tlmm: pinctrl@fd510000 {
+		compatible = "qcom,fsm9900-pinctrl";
+
+		mdio_pins_a: mdio {
+			state {
+				pins = "gpio123", "gpio124";
+				function = "mdio";
+			};
+		};
+	};
+
+
+QDF2432:
+
+soc {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	emac0: ethernet@38800000 {
+		compatible = "qcom,fsm9900-emac";
+		reg = <0x0 0x38800000 0x0 0x10000>,
+		      <0x0 0x38816000 0x0 0x1000>;
+		interrupts = <0 256 4>;
+
+		clocks = <&gcc 0>, <&gcc 1>, <&gcc 3>, <&gcc 4>, <&gcc 5>,
+			 <&gcc 6>, <&gcc 7>;
+		clock-names = "axi_clk", "cfg_ahb_clk", "high_speed_clk",
+			"mdio_clk", "tx_clk", "rx_clk", "sys_clk";
+
+		internal-phy = <&emac_sgmii>;
+
+		phy-handle = <&phy0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@4 {
+			reg = <4>;
+		};
+	};
+
+	emac_sgmii: ethernet@410400 {
+		compatible = "qcom,qdf2432-emac-sgmii";
+		reg = <0x0 0x00410400 0x0 0xc00>, /* Base address */
+		      <0x0 0x00410000 0x0 0x400>; /* Per-lane digital */
+		interrupts = <0 254 1>;
+	};