Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 48 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/pci/pci-armada8k.txt b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
new file mode 100644
index 000000000..ff25a134b
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/pci-armada8k.txt
@@ -0,0 +1,48 @@
+* Marvell Armada 7K/8K PCIe interface
+
+This PCIe host controller is based on the Synopsys DesignWare PCIe IP
+and thus inherits all the common properties defined in snps,dw-pcie.yaml.
+
+Required properties:
+- compatible: "marvell,armada8k-pcie"
+- reg: must contain two register regions
+   - the control register region
+   - the config space region
+- reg-names:
+   - "ctrl" for the control register region
+   - "config" for the config space region
+- interrupts: Interrupt specifier for the PCIe controller
+- clocks: reference to the PCIe controller clocks
+- clock-names: mandatory if there is a second clock, in this case the
+   name must be "core" for the first clock and "reg" for the second
+   one
+
+Optional properties:
+- phys: phandle(s) to PHY node(s) following the generic PHY bindings.
+	Either 1, 2 or 4 PHYs might be needed depending on the number of
+	PCIe lanes.
+- phy-names: names of the PHYs corresponding to the number of lanes.
+	Must be "cp0-pcie0-x4-lane0-phy", "cp0-pcie0-x4-lane1-phy" for
+	2 PHYs.
+
+Example:
+
+	pcie@f2600000 {
+		compatible = "marvell,armada8k-pcie", "snps,dw-pcie";
+		reg = <0 0xf2600000 0 0x10000>, <0 0xf6f00000 0 0x80000>;
+		reg-names = "ctrl", "config";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		#interrupt-cells = <1>;
+		device_type = "pci";
+		dma-coherent;
+
+		bus-range = <0 0xff>;
+		ranges = <0x81000000 0 0xf9000000 0  0xf9000000 0 0x10000	/* downstream I/O */
+			  0x82000000 0 0xf6000000 0  0xf6000000 0 0xf00000>;	/* non-prefetchable memory */
+		interrupt-map-mask = <0 0 0 0>;
+		interrupt-map = <0 0 0 0 &gic 0 GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+		num-lanes = <1>;
+		clocks = <&cpm_syscon0 1 13>;
+	};