Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 260 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
new file mode 100644
index 000000000..2225925b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/ti,phy-j721e-wiz.yaml
@@ -0,0 +1,260 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/ti,phy-j721e-wiz.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: TI J721E WIZ (SERDES Wrapper)
+
+maintainers:
+  - Kishon Vijay Abraham I <kishon@ti.com>
+
+properties:
+  compatible:
+    enum:
+      - ti,j721e-wiz-16g
+      - ti,j721e-wiz-10g
+      - ti,am64-wiz-10g
+      - ti,j7200-wiz-10g
+
+  power-domains:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+    maxItems: 4
+    description: clock-specifier to represent input to the WIZ
+
+  clock-names:
+    minItems: 3
+    items:
+      - const: fck
+      - const: core_ref_clk
+      - const: ext_ref_clk
+      - const: core_ref1_clk
+
+  num-lanes:
+    minimum: 1
+    maximum: 4
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  "#reset-cells":
+    const: 1
+
+  "#clock-cells":
+    const: 1
+
+  ranges: true
+
+  assigned-clocks:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-parents:
+    minItems: 1
+    maxItems: 2
+
+  assigned-clock-rates:
+    minItems: 1
+    maxItems: 2
+
+  typec-dir-gpios:
+    maxItems: 1
+    description:
+      GPIO to signal Type-C cable orientation for lane swap.
+      If GPIO is active, lane 0 and lane 1 of SERDES will be swapped to
+      achieve the funtionality of an external type-C plug flip mux.
+
+  typec-dir-debounce-ms:
+    minimum: 100
+    maximum: 1000
+    default: 100
+    description:
+      Number of milliseconds to wait before sampling typec-dir-gpio.
+      If not specified, the default debounce of 100ms will be used.
+      Type-C spec states minimum CC pin debounce of 100 ms and maximum
+      of 200 ms. However, some solutions might need more than 200 ms.
+
+  refclk-dig:
+    type: object
+    additionalProperties: false
+    description: |
+      WIZ node should have subnode for refclk_dig to select the reference
+      clock source for the reference clock used in the PHY and PMA digital
+      logic.
+    deprecated: true
+    properties:
+      clocks:
+        minItems: 2
+        maxItems: 4
+        description: Phandle to two (Torrent) or four (Sierra) clock nodes representing
+          the inputs to refclk_dig
+
+      "#clock-cells":
+        const: 0
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+      - assigned-clocks
+      - assigned-clock-parents
+
+  ti,scm:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: |
+      phandle to System Control Module for syscon regmap access.
+
+patternProperties:
+  "^pll[0|1]-refclk$":
+    type: object
+    additionalProperties: false
+    description: |
+      WIZ node should have subnodes for each of the PLLs present in
+      the SERDES.
+    deprecated: true
+    properties:
+      clocks:
+        maxItems: 2
+        description: Phandle to clock nodes representing the two inputs to PLL.
+
+      "#clock-cells":
+        const: 0
+
+      assigned-clocks:
+        maxItems: 1
+
+      assigned-clock-parents:
+        maxItems: 1
+
+    required:
+      - clocks
+      - "#clock-cells"
+      - assigned-clocks
+      - assigned-clock-parents
+
+  "^cmn-refclk1?-dig-div$":
+    type: object
+    additionalProperties: false
+    description:
+      WIZ node should have subnodes for each of the PMA common refclock
+      provided by the SERDES.
+    deprecated: true
+    properties:
+      clocks:
+        maxItems: 1
+        description: Phandle to the clock node representing the input to the
+          divider clock.
+
+      "#clock-cells":
+        const: 0
+
+    required:
+      - clocks
+      - "#clock-cells"
+
+  "^serdes@[0-9a-f]+$":
+    type: object
+    description: |
+      WIZ node should have '1' subnode for the SERDES. It could be either
+      Sierra SERDES or Torrent SERDES. Sierra SERDES should follow the
+      bindings specified in
+      Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml
+      Torrent SERDES should follow the bindings specified in
+      Documentation/devicetree/bindings/phy/phy-cadence-torrent.yaml
+
+required:
+  - compatible
+  - power-domains
+  - clocks
+  - clock-names
+  - num-lanes
+  - "#address-cells"
+  - "#size-cells"
+  - "#reset-cells"
+  - ranges
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j7200-wiz-10g
+    then:
+      required:
+        - ti,scm
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/soc/ti,sci_pm_domain.h>
+
+    wiz@5000000 {
+           compatible = "ti,j721e-wiz-16g";
+           #address-cells = <1>;
+           #size-cells = <1>;
+           power-domains = <&k3_pds 292 TI_SCI_PD_EXCLUSIVE>;
+           clocks = <&k3_clks 292 5>, <&k3_clks 292 11>, <&dummy_cmn_refclk>;
+           clock-names = "fck", "core_ref_clk", "ext_ref_clk";
+           assigned-clocks = <&k3_clks 292 11>, <&k3_clks 292 0>;
+           assigned-clock-parents = <&k3_clks 292 15>, <&k3_clks 292 4>;
+           num-lanes = <2>;
+           #reset-cells = <1>;
+           ranges = <0x5000000 0x5000000 0x10000>;
+
+           pll0-refclk {
+                  clocks = <&k3_clks 293 13>, <&dummy_cmn_refclk>;
+                  #clock-cells = <0>;
+                  assigned-clocks = <&wiz1_pll0_refclk>;
+                  assigned-clock-parents = <&k3_clks 293 13>;
+           };
+
+           pll1-refclk {
+                  clocks = <&k3_clks 293 0>, <&dummy_cmn_refclk1>;
+                  #clock-cells = <0>;
+                  assigned-clocks = <&wiz1_pll1_refclk>;
+                  assigned-clock-parents = <&k3_clks 293 0>;
+           };
+
+           cmn-refclk-dig-div {
+                  clocks = <&wiz1_refclk_dig>;
+                  #clock-cells = <0>;
+           };
+
+           cmn-refclk1-dig-div {
+                  clocks = <&wiz1_pll1_refclk>;
+                  #clock-cells = <0>;
+           };
+
+           refclk-dig {
+                  clocks = <&k3_clks 292 11>, <&k3_clks 292 0>,
+                          <&dummy_cmn_refclk>, <&dummy_cmn_refclk1>;
+                  #clock-cells = <0>;
+                  assigned-clocks = <&wiz0_refclk_dig>;
+                  assigned-clock-parents = <&k3_clks 292 11>;
+           };
+
+           serdes@5000000 {
+                  compatible = "ti,sierra-phy-t0";
+                  reg-names = "serdes";
+                  reg = <0x5000000 0x10000>;
+                  #address-cells = <1>;
+                  #size-cells = <0>;
+                  resets = <&serdes_wiz0 0>;
+                  reset-names = "sierra_reset";
+                  clocks = <&wiz0_cmn_refclk_dig_div>, <&wiz0_cmn_refclk1_dig_div>;
+                  clock-names = "cmn_refclk_dig_div", "cmn_refclk1_dig_div";
+           };
+    };