Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 44 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/soc/fsl/guts.txt b/Documentation/devicetree/bindings/soc/fsl/guts.txt
new file mode 100644
index 000000000..07adca914
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/guts.txt
@@ -0,0 +1,44 @@
+* Global Utilities Block
+
+The global utilities block controls power management, I/O device
+enabling, power-on-reset configuration monitoring, general-purpose
+I/O signal configuration, alternate function selection for multiplexed
+signals, and clock control.
+
+Required properties:
+
+ - compatible : Should define the compatible device type for
+   global-utilities.
+   Possible compatibles:
+	"fsl,qoriq-device-config-1.0"
+	"fsl,qoriq-device-config-2.0"
+	"fsl,<chip>-device-config"
+	"fsl,<chip>-guts"
+ - reg : Offset and length of the register set for the device.
+
+Recommended properties:
+
+ - fsl,has-rstcr : Indicates that the global utilities register set
+   contains a functioning "reset control register" (i.e. the board
+   is wired to reset upon setting the HRESET_REQ bit in this register).
+
+ - fsl,liodn-bits : Indicates the number of defined bits in the LIODN
+   registers, for those SOCs that have a PAMU device.
+
+ - little-endian : Indicates that the global utilities block is little
+   endian. The default is big endian.
+
+Examples:
+	global-utilities@e0000 {	/* global utilities block */
+		compatible = "fsl,mpc8548-guts";
+		reg = <e0000 1000>;
+		fsl,has-rstcr;
+	};
+
+	guts: global-utilities@e0000 {
+		compatible = "fsl,qoriq-device-config-1.0";
+		reg = <0xe0000 0xe00>;
+		fsl,has-rstcr;
+		#sleep-cells = <1>;
+		fsl,liodn-bits = <12>;
+	};