Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 37 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
new file mode 100644
index 000000000..40d80b93e
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra20-slink.txt
@@ -0,0 +1,37 @@
+NVIDIA Tegra20/Tegra30 SLINK controller.
+
+Required properties:
+- compatible : should be "nvidia,tegra20-slink", "nvidia,tegra30-slink".
+- reg: Should contain SLINK registers location and length.
+- interrupts: Should contain SLINK interrupts.
+- clocks : Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - spi
+- dmas : Must contain an entry for each entry in clock-names.
+  See ../dma/dma.txt for details.
+- dma-names : Must include the following entries:
+  - rx
+  - tx
+
+Recommended properties:
+- spi-max-frequency: Definition as per
+                     Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+spi@7000d600 {
+	compatible = "nvidia,tegra20-slink";
+	reg = <0x7000d600 0x200>;
+	interrupts = <0 82 0x04>;
+	spi-max-frequency = <25000000>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clocks = <&tegra_car 44>;
+	resets = <&tegra_car 44>;
+	reset-names = "spi";
+	dmas = <&apbdma 16>, <&apbdma 16>;
+	dma-names = "rx", "tx";
+};