Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 96 insertions, 0 deletions

diff --git a/Documentation/hwmon/corsair-psu.rst b/Documentation/hwmon/corsair-psu.rst
new file mode 100644
index 000000000..6a03edb55
--- /dev/null
+++ b/Documentation/hwmon/corsair-psu.rst
@@ -0,0 +1,96 @@
+.. SPDX-License-Identifier: GPL-2.0-or-later
+
+Kernel driver corsair-psu
+=========================
+
+Supported devices:
+
+* Corsair Power Supplies
+
+  Corsair HX550i
+
+  Corsair HX650i
+
+  Corsair HX750i
+
+  Corsair HX850i
+
+  Corsair HX1000i (revision 1 and 2)
+
+  Corsair HX1200i
+
+  Corsair HX1500i
+
+  Corsair RM550i
+
+  Corsair RM650i
+
+  Corsair RM750i
+
+  Corsair RM850i
+
+  Corsair RM1000i
+
+Author: Wilken Gottwalt
+
+Description
+-----------
+
+This driver implements the sysfs interface for the Corsair PSUs with a HID protocol
+interface of the HXi and RMi series.
+These power supplies provide access to a micro-controller with 2 attached
+temperature sensors, 1 fan rpm sensor, 4 sensors for volt levels, 4 sensors for
+power usage and 4 sensors for current levels and addtional non-sensor information
+like uptimes.
+
+Sysfs entries
+-------------
+
+=======================	========================================================
+curr1_input		Total current usage
+curr2_input		Current on the 12v psu rail
+curr2_crit		Current max critical value on the 12v psu rail
+curr3_input		Current on the 5v psu rail
+curr3_crit		Current max critical value on the 5v psu rail
+curr4_input		Current on the 3.3v psu rail
+curr4_crit		Current max critical value on the 3.3v psu rail
+fan1_input		RPM of psu fan
+in0_input		Voltage of the psu ac input
+in1_input		Voltage of the 12v psu rail
+in1_crit		Voltage max critical value on the 12v psu rail
+in1_lcrit		Voltage min critical value on the 12v psu rail
+in2_input		Voltage of the 5v psu rail
+in2_crit		Voltage max critical value on the 5v psu rail
+in2_lcrit		Voltage min critical value on the 5v psu rail
+in3_input		Voltage of the 3.3v psu rail
+in3_crit		Voltage max critical value on the 3.3v psu rail
+in3_lcrit		Voltage min critical value on the 3.3v psu rail
+power1_input		Total power usage
+power2_input		Power usage of the 12v psu rail
+power3_input		Power usage of the 5v psu rail
+power4_input		Power usage of the 3.3v psu rail
+temp1_input		Temperature of the psu vrm component
+temp1_crit		Temperature max cirtical value of the psu vrm component
+temp2_input		Temperature of the psu case
+temp2_crit		Temperature max critical value of psu case
+=======================	========================================================
+
+Usage Notes
+-----------
+
+It is an USB HID device, so it is auto-detected and supports hot-swapping.
+
+Flickering values in the rail voltage levels can be an indicator for a failing
+PSU. The driver also provides some additional useful values via debugfs, which
+do not fit into the hwmon class.
+
+Debugfs entries
+---------------
+
+=======================	========================================================
+ocpmode                 Single or multi rail mode of the PCIe power connectors
+product                 Product name of the psu
+uptime			Session uptime of the psu
+uptime_total		Total uptime of the psu
+vendor			Vendor name of the psu
+=======================	========================================================