Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

16 files changed, 3499 insertions, 0 deletions

diff --git a/arch/arm/mach-at91/.gitignore b/arch/arm/mach-at91/.gitignore
new file mode 100644
index 000000000..f6d473896
--- /dev/null
+++ b/arch/arm/mach-at91/.gitignore
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+pm_data-offsets.h
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
new file mode 100644
index 000000000..3dd9e7186
--- /dev/null
+++ b/arch/arm/mach-at91/Kconfig
@@ -0,0 +1,241 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_AT91
+	bool "AT91/Microchip SoCs"
+	depends on (CPU_LITTLE_ENDIAN && (ARCH_MULTI_V4T || ARCH_MULTI_V5)) || \
+		ARCH_MULTI_V7 || ARM_SINGLE_ARMV7M
+	select ARM_CPU_SUSPEND if PM && ARCH_MULTI_V7
+	select COMMON_CLK_AT91
+	select GPIOLIB
+	select PINCTRL
+	select SOC_BUS
+
+if ARCH_AT91
+config SOC_SAMV7
+	bool "SAM Cortex-M7 family" if ARM_SINGLE_ARMV7M
+	select COMMON_CLK_AT91
+	select PINCTRL_AT91
+	help
+	  Select this if you are using an SoC from Microchip's SAME7, SAMS7 or SAMV7
+	  families.
+
+config SOC_SAMA5D2
+	bool "SAMA5D2 family"
+	depends on ARCH_MULTI_V7
+	select SOC_SAMA5
+	select CACHE_L2X0
+	select HAVE_AT91_UTMI
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_H32MX
+	select HAVE_AT91_GENERATED_CLK
+	select HAVE_AT91_AUDIO_PLL
+	select HAVE_AT91_I2S_MUX_CLK
+	select PINCTRL_AT91PIO4
+	help
+	  Select this if ou are using one of Microchip's SAMA5D2 family SoC.
+
+config SOC_SAMA5D3
+	bool "SAMA5D3 family"
+	depends on ARCH_MULTI_V7
+	select SOC_SAMA5
+	select HAVE_AT91_UTMI
+	select HAVE_AT91_SMD
+	select HAVE_AT91_USB_CLK
+	select PINCTRL_AT91
+	help
+	  Select this if you are using one of Microchip's SAMA5D3 family SoC.
+	  This support covers SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36.
+
+config SOC_SAMA5D4
+	bool "SAMA5D4 family"
+	depends on ARCH_MULTI_V7
+	select SOC_SAMA5
+	select CACHE_L2X0
+	select HAVE_AT91_UTMI
+	select HAVE_AT91_SMD
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_H32MX
+	select PINCTRL_AT91
+	help
+	  Select this if you are using one of Microchip's SAMA5D4 family SoC.
+
+config SOC_SAMA7G5
+	bool "SAMA7G5 family"
+	depends on ARCH_MULTI_V7
+	select HAVE_AT91_GENERATED_CLK
+	select HAVE_AT91_SAM9X60_PLL
+	select HAVE_AT91_UTMI
+	select PM_OPP
+	select SOC_SAMA7
+	help
+	  Select this if you are using one of Microchip's SAMA7G5 family SoC.
+
+config SOC_LAN966
+	bool "ARMv7 based Microchip LAN966 SoC family"
+	depends on ARCH_MULTI_V7
+	select DW_APB_TIMER_OF
+	select ARM_GIC
+	select MEMORY
+	help
+	  This enables support for ARMv7 based Microchip LAN966 SoC family.
+
+config SOC_AT91RM9200
+	bool "AT91RM9200"
+	depends on ARCH_MULTI_V4T
+	select ATMEL_AIC_IRQ
+	select ATMEL_PM if PM
+	select ATMEL_ST
+	select CPU_ARM920T
+	select HAVE_AT91_USB_CLK
+	select PINCTRL_AT91
+	select SOC_SAM_V4_V5
+	select SRAM if PM
+	help
+	  Select this if you are using Microchip's AT91RM9200 SoC.
+
+config SOC_AT91SAM9
+	bool "AT91SAM9"
+	depends on ARCH_MULTI_V5
+	select ATMEL_AIC_IRQ
+	select ATMEL_PM if PM
+	select ATMEL_SDRAMC
+	select CPU_ARM926T
+	select HAVE_AT91_SMD
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_UTMI
+	select HAVE_FB_ATMEL
+	select MEMORY
+	select PINCTRL_AT91
+	select SOC_SAM_V4_V5
+	select SRAM if PM
+	help
+	  Select this if you are using one of those Microchip SoC:
+	    AT91SAM9260
+	    AT91SAM9261
+	    AT91SAM9263
+	    AT91SAM9G15
+	    AT91SAM9G20
+	    AT91SAM9G25
+	    AT91SAM9G35
+	    AT91SAM9G45
+	    AT91SAM9G46
+	    AT91SAM9M10
+	    AT91SAM9M11
+	    AT91SAM9N12
+	    AT91SAM9RL
+	    AT91SAM9X25
+	    AT91SAM9X35
+	    AT91SAM9XE
+
+config SOC_SAM9X60
+	bool "SAM9X60"
+	depends on ARCH_MULTI_V5
+	select ATMEL_AIC5_IRQ
+	select ATMEL_PM if PM
+	select ATMEL_SDRAMC
+	select CPU_ARM926T
+	select HAVE_AT91_USB_CLK
+	select HAVE_AT91_GENERATED_CLK
+	select HAVE_AT91_SAM9X60_PLL
+	select MEMORY
+	select PINCTRL_AT91
+	select SOC_SAM_V4_V5
+	select SRAM if PM
+	help
+	  Select this if you are using Microchip's SAM9X60 SoC
+
+comment "Clocksource driver selection"
+
+config ATMEL_CLOCKSOURCE_PIT
+	bool "Periodic Interval Timer (PIT) support"
+	depends on SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
+	default SOC_AT91SAM9 || SOC_SAMA5
+	select ATMEL_PIT
+	help
+	  Select this to get a clocksource based on the Atmel Periodic Interval
+	  Timer. It has a relatively low resolution and the TC Block clocksource
+	  should be preferred.
+
+config ATMEL_CLOCKSOURCE_TCB
+	bool "Timer Counter Blocks (TCB) support"
+	default SOC_AT91RM9200 || SOC_AT91SAM9 || SOC_SAM9X60 || SOC_SAMA5
+	select ATMEL_TCB_CLKSRC
+	help
+	  Select this to get a high precision clocksource based on a
+	  TC block with a 5+ MHz base clock rate.
+	  On platforms with 16-bit counters, two timer channels are combined
+	  to make a single 32-bit timer.
+	  It can also be used as a clock event device supporting oneshot mode.
+
+config MICROCHIP_CLOCKSOURCE_PIT64B
+	bool "64-bit Periodic Interval Timer (PIT64B) support"
+	default SOC_SAM9X60 || SOC_SAMA7
+	select MICROCHIP_PIT64B
+	help
+	  Select this to get a high resolution clockevent (SAM9X60) or
+	  clocksource and clockevent (SAMA7G5) based on Microchip 64-bit
+	  Periodic Interval Timer.
+
+config HAVE_AT91_UTMI
+	bool
+
+config HAVE_AT91_USB_CLK
+	bool
+
+config COMMON_CLK_AT91
+	bool
+	select MFD_SYSCON
+
+config HAVE_AT91_SMD
+	bool
+
+config HAVE_AT91_H32MX
+	bool
+
+config HAVE_AT91_GENERATED_CLK
+	bool
+
+config HAVE_AT91_AUDIO_PLL
+	bool
+
+config HAVE_AT91_I2S_MUX_CLK
+	bool
+
+config HAVE_AT91_SAM9X60_PLL
+	bool
+
+config SOC_SAM_V4_V5
+	bool
+
+config SOC_SAM_V7
+	bool
+
+config SOC_SAMA5
+	bool
+	select ATMEL_AIC5_IRQ
+	select ATMEL_PM if PM
+	select ATMEL_SDRAMC
+	select MEMORY
+	select SOC_SAM_V7
+	select SRAM if PM
+
+config ATMEL_PM
+	bool
+
+config ATMEL_SECURE_PM
+	bool "Atmel Secure PM support"
+	depends on SOC_SAMA5D2 && ATMEL_PM
+	select ARM_PSCI
+	help
+	  When running under a TEE, the suspend mode must be requested to be set
+	  at TEE level. When enable, this option will use secure monitor calls
+	  to set the suspend level. PSCI is then used to enter suspend.
+
+config SOC_SAMA7
+	bool
+	select ARM_GIC
+	select ATMEL_PM if PM
+	select ATMEL_SDRAMC
+	select MEMORY
+	select SOC_SAM_V7
+	select SRAM if PM
+endif
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
new file mode 100644
index 000000000..0dcc37180
--- /dev/null
+++ b/arch/arm/mach-at91/Makefile
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+# CPU-specific support
+obj-$(CONFIG_SOC_AT91RM9200)	+= at91rm9200.o
+obj-$(CONFIG_SOC_AT91SAM9)	+= at91sam9.o
+obj-$(CONFIG_SOC_SAM9X60)	+= sam9x60.o
+obj-$(CONFIG_SOC_SAMA5)		+= sama5.o sam_secure.o
+obj-$(CONFIG_SOC_SAMA7)		+= sama7.o
+obj-$(CONFIG_SOC_SAMV7)		+= samv7.o
+
+# Power Management
+obj-$(CONFIG_ATMEL_PM)		+= pm.o pm_suspend.o
+
+ifeq ($(CONFIG_CPU_V7),y)
+AFLAGS_pm_suspend.o := -march=armv7-a
+endif
+ifeq ($(CONFIG_PM_DEBUG),y)
+CFLAGS_pm.o += -DDEBUG
+endif
+
+$(obj)/pm_data-offsets.h: $(obj)/pm_data-offsets.s FORCE
+	$(call filechk,offsets,__PM_DATA_OFFSETS_H__)
+
+$(obj)/pm_suspend.o: $(obj)/pm_data-offsets.h
+
+targets += pm_data-offsets.s
+clean-files += pm_data-offsets.h
diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c
new file mode 100644
index 000000000..4f8186211
--- /dev/null
+++ b/arch/arm/mach-at91/at91rm9200.c
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Setup code for AT91RM9200
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ *                2012 Joachim Eastwood <manabian@gmail.com>
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+
+#include "generic.h"
+
+static void __init at91rm9200_dt_device_init(void)
+{
+	of_platform_default_populate(NULL, NULL, NULL);
+
+	at91rm9200_pm_init();
+}
+
+static const char *const at91rm9200_dt_board_compat[] __initconst = {
+	"atmel,at91rm9200",
+	NULL
+};
+
+DT_MACHINE_START(at91rm9200_dt, "Atmel AT91RM9200")
+	.init_machine	= at91rm9200_dt_device_init,
+	.dt_compat	= at91rm9200_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/at91sam9.c b/arch/arm/mach-at91/at91sam9.c
new file mode 100644
index 000000000..7e572189a
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Setup code for AT91SAM9
+ *
+ *  Copyright (C) 2011 Atmel,
+ *                2011 Nicolas Ferre <nicolas.ferre@atmel.com>
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/system_misc.h>
+
+#include "generic.h"
+
+static void __init at91sam9_init(void)
+{
+	of_platform_default_populate(NULL, NULL, NULL);
+
+	at91sam9_pm_init();
+}
+
+static const char *const at91_dt_board_compat[] __initconst = {
+	"atmel,at91sam9",
+	NULL
+};
+
+DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM9")
+	/* Maintainer: Atmel */
+	.init_machine	= at91sam9_init,
+	.dt_compat	= at91_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
new file mode 100644
index 000000000..0c3960a8b
--- /dev/null
+++ b/arch/arm/mach-at91/generic.h
@@ -0,0 +1,27 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * linux/arch/arm/mach-at91/generic.h
+ *
+ *  Copyright (C) 2005 David Brownell
+ */
+
+#ifndef _AT91_GENERIC_H
+#define _AT91_GENERIC_H
+
+#ifdef CONFIG_PM
+extern void __init at91rm9200_pm_init(void);
+extern void __init at91sam9_pm_init(void);
+extern void __init sam9x60_pm_init(void);
+extern void __init sama5_pm_init(void);
+extern void __init sama5d2_pm_init(void);
+extern void __init sama7_pm_init(void);
+#else
+static inline void __init at91rm9200_pm_init(void) { }
+static inline void __init at91sam9_pm_init(void) { }
+static inline void __init sam9x60_pm_init(void) { }
+static inline void __init sama5_pm_init(void) { }
+static inline void __init sama5d2_pm_init(void) { }
+static inline void __init sama7_pm_init(void) { }
+#endif
+
+#endif /* _AT91_GENERIC_H */
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
new file mode 100644
index 000000000..437dd0352
--- /dev/null
+++ b/arch/arm/mach-at91/pm.c
@@ -0,0 +1,1668 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * arch/arm/mach-at91/pm.c
+ * AT91 Power Management
+ *
+ * Copyright (C) 2005 David Brownell
+ */
+
+#include <linux/genalloc.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+#include <linux/parser.h>
+#include <linux/suspend.h>
+
+#include <linux/clk.h>
+#include <linux/clk/at91_pmc.h>
+#include <linux/platform_data/atmel.h>
+
+#include <asm/cacheflush.h>
+#include <asm/fncpy.h>
+#include <asm/system_misc.h>
+#include <asm/suspend.h>
+
+#include "generic.h"
+#include "pm.h"
+#include "sam_secure.h"
+
+#define BACKUP_DDR_PHY_CALIBRATION	(9)
+
+/**
+ * struct at91_pm_bu - AT91 power management backup unit data structure
+ * @suspended: true if suspended to backup mode
+ * @reserved: reserved
+ * @canary: canary data for memory checking after exit from backup mode
+ * @resume: resume API
+ * @ddr_phy_calibration: DDR PHY calibration data: ZQ0CR0, first 8 words
+ * of the memory
+ */
+struct at91_pm_bu {
+	int suspended;
+	unsigned long reserved;
+	phys_addr_t canary;
+	phys_addr_t resume;
+	unsigned long ddr_phy_calibration[BACKUP_DDR_PHY_CALIBRATION];
+};
+
+/**
+ * struct at91_pm_sfrbu_regs - registers mapping for SFRBU
+ * @pswbu: power switch BU control registers
+ */
+struct at91_pm_sfrbu_regs {
+	struct {
+		u32 key;
+		u32 ctrl;
+		u32 state;
+		u32 softsw;
+	} pswbu;
+};
+
+/**
+ * enum at91_pm_eth_clk - Ethernet clock indexes
+ * @AT91_PM_ETH_PCLK: pclk index
+ * @AT91_PM_ETH_HCLK: hclk index
+ * @AT91_PM_ETH_MAX_CLK: max index
+ */
+enum at91_pm_eth_clk {
+	AT91_PM_ETH_PCLK,
+	AT91_PM_ETH_HCLK,
+	AT91_PM_ETH_MAX_CLK,
+};
+
+/**
+ * enum at91_pm_eth - Ethernet controller indexes
+ * @AT91_PM_G_ETH: gigabit Ethernet controller index
+ * @AT91_PM_E_ETH: megabit Ethernet controller index
+ * @AT91_PM_MAX_ETH: max index
+ */
+enum at91_pm_eth {
+	AT91_PM_G_ETH,
+	AT91_PM_E_ETH,
+	AT91_PM_MAX_ETH,
+};
+
+/**
+ * struct at91_pm_quirk_eth - AT91 PM Ethernet quirks
+ * @dev: Ethernet device
+ * @np: Ethernet device node
+ * @clks: Ethernet clocks
+ * @modes: power management mode that this quirk applies to
+ * @dns_modes: do not suspend modes: stop suspending if Ethernet is configured
+ *	       as wakeup source but buggy and no other wakeup source is
+ *	       available
+ */
+struct at91_pm_quirk_eth {
+	struct device *dev;
+	struct device_node *np;
+	struct clk_bulk_data clks[AT91_PM_ETH_MAX_CLK];
+	u32 modes;
+	u32 dns_modes;
+};
+
+/**
+ * struct at91_pm_quirks - AT91 PM quirks
+ * @eth: Ethernet quirks
+ */
+struct at91_pm_quirks {
+	struct at91_pm_quirk_eth eth[AT91_PM_MAX_ETH];
+};
+
+/**
+ * struct at91_soc_pm - AT91 SoC power management data structure
+ * @config_shdwc_ws: wakeup sources configuration function for SHDWC
+ * @config_pmc_ws: wakeup srouces configuration function for PMC
+ * @ws_ids: wakup sources of_device_id array
+ * @bu: backup unit mapped data (for backup mode)
+ * @quirks: PM quirks
+ * @data: PM data to be used on last phase of suspend
+ * @sfrbu_regs: SFRBU registers mapping
+ * @memcs: memory chip select
+ */
+struct at91_soc_pm {
+	int (*config_shdwc_ws)(void __iomem *shdwc, u32 *mode, u32 *polarity);
+	int (*config_pmc_ws)(void __iomem *pmc, u32 mode, u32 polarity);
+	const struct of_device_id *ws_ids;
+	struct at91_pm_bu *bu;
+	struct at91_pm_quirks quirks;
+	struct at91_pm_data data;
+	struct at91_pm_sfrbu_regs sfrbu_regs;
+	void *memcs;
+};
+
+/**
+ * enum at91_pm_iomaps - IOs that needs to be mapped for different PM modes
+ * @AT91_PM_IOMAP_SHDWC:	SHDWC controller
+ * @AT91_PM_IOMAP_SFRBU:	SFRBU controller
+ * @AT91_PM_IOMAP_ETHC:		Ethernet controller
+ */
+enum at91_pm_iomaps {
+	AT91_PM_IOMAP_SHDWC,
+	AT91_PM_IOMAP_SFRBU,
+	AT91_PM_IOMAP_ETHC,
+};
+
+#define AT91_PM_IOMAP(name)	BIT(AT91_PM_IOMAP_##name)
+
+static struct at91_soc_pm soc_pm = {
+	.data = {
+		.standby_mode = AT91_PM_STANDBY,
+		.suspend_mode = AT91_PM_ULP0,
+	},
+};
+
+static const match_table_t pm_modes __initconst = {
+	{ AT91_PM_STANDBY,	"standby" },
+	{ AT91_PM_ULP0,		"ulp0" },
+	{ AT91_PM_ULP0_FAST,    "ulp0-fast" },
+	{ AT91_PM_ULP1,		"ulp1" },
+	{ AT91_PM_BACKUP,	"backup" },
+	{ -1, NULL },
+};
+
+#define at91_ramc_read(id, field) \
+	__raw_readl(soc_pm.data.ramc[id] + field)
+
+#define at91_ramc_write(id, field, value) \
+	__raw_writel(value, soc_pm.data.ramc[id] + field)
+
+static int at91_pm_valid_state(suspend_state_t state)
+{
+	switch (state) {
+		case PM_SUSPEND_ON:
+		case PM_SUSPEND_STANDBY:
+		case PM_SUSPEND_MEM:
+			return 1;
+
+		default:
+			return 0;
+	}
+}
+
+static int canary = 0xA5A5A5A5;
+
+struct wakeup_source_info {
+	unsigned int pmc_fsmr_bit;
+	unsigned int shdwc_mr_bit;
+	bool set_polarity;
+};
+
+static const struct wakeup_source_info ws_info[] = {
+	{ .pmc_fsmr_bit = AT91_PMC_FSTT(10),	.set_polarity = true },
+	{ .pmc_fsmr_bit = AT91_PMC_RTCAL,	.shdwc_mr_bit = BIT(17) },
+	{ .pmc_fsmr_bit = AT91_PMC_USBAL },
+	{ .pmc_fsmr_bit = AT91_PMC_SDMMC_CD },
+	{ .pmc_fsmr_bit = AT91_PMC_RTTAL },
+	{ .pmc_fsmr_bit = AT91_PMC_RXLP_MCE },
+};
+
+static const struct of_device_id sama5d2_ws_ids[] = {
+	{ .compatible = "atmel,sama5d2-gem",		.data = &ws_info[0] },
+	{ .compatible = "atmel,sama5d2-rtc",		.data = &ws_info[1] },
+	{ .compatible = "atmel,sama5d3-udc",		.data = &ws_info[2] },
+	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
+	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
+	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
+	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
+	{ .compatible = "atmel,sama5d2-sdhci",		.data = &ws_info[3] },
+	{ /* sentinel */ }
+};
+
+static const struct of_device_id sam9x60_ws_ids[] = {
+	{ .compatible = "microchip,sam9x60-rtc",	.data = &ws_info[1] },
+	{ .compatible = "atmel,at91rm9200-ohci",	.data = &ws_info[2] },
+	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
+	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
+	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
+	{ .compatible = "microchip,sam9x60-rtt",	.data = &ws_info[4] },
+	{ .compatible = "cdns,sam9x60-macb",		.data = &ws_info[5] },
+	{ /* sentinel */ }
+};
+
+static const struct of_device_id sama7g5_ws_ids[] = {
+	{ .compatible = "microchip,sama7g5-rtc",	.data = &ws_info[1] },
+	{ .compatible = "microchip,sama7g5-ohci",	.data = &ws_info[2] },
+	{ .compatible = "usb-ohci",			.data = &ws_info[2] },
+	{ .compatible = "atmel,at91sam9g45-ehci",	.data = &ws_info[2] },
+	{ .compatible = "usb-ehci",			.data = &ws_info[2] },
+	{ .compatible = "microchip,sama7g5-sdhci",	.data = &ws_info[3] },
+	{ .compatible = "microchip,sama7g5-rtt",	.data = &ws_info[4] },
+	{ /* sentinel */ }
+};
+
+static int at91_pm_config_ws(unsigned int pm_mode, bool set)
+{
+	const struct wakeup_source_info *wsi;
+	const struct of_device_id *match;
+	struct platform_device *pdev;
+	struct device_node *np;
+	unsigned int mode = 0, polarity = 0, val = 0;
+
+	if (pm_mode != AT91_PM_ULP1)
+		return 0;
+
+	if (!soc_pm.data.pmc || !soc_pm.data.shdwc || !soc_pm.ws_ids)
+		return -EPERM;
+
+	if (!set) {
+		writel(mode, soc_pm.data.pmc + AT91_PMC_FSMR);
+		return 0;
+	}
+
+	if (soc_pm.config_shdwc_ws)
+		soc_pm.config_shdwc_ws(soc_pm.data.shdwc, &mode, &polarity);
+
+	/* SHDWC.MR */
+	val = readl(soc_pm.data.shdwc + 0x04);
+
+	/* Loop through defined wakeup sources. */
+	for_each_matching_node_and_match(np, soc_pm.ws_ids, &match) {
+		pdev = of_find_device_by_node(np);
+		if (!pdev)
+			continue;
+
+		if (device_may_wakeup(&pdev->dev)) {
+			wsi = match->data;
+
+			/* Check if enabled on SHDWC. */
+			if (wsi->shdwc_mr_bit && !(val & wsi->shdwc_mr_bit))
+				goto put_device;
+
+			mode |= wsi->pmc_fsmr_bit;
+			if (wsi->set_polarity)
+				polarity |= wsi->pmc_fsmr_bit;
+		}
+
+put_device:
+		put_device(&pdev->dev);
+	}
+
+	if (mode) {
+		if (soc_pm.config_pmc_ws)
+			soc_pm.config_pmc_ws(soc_pm.data.pmc, mode, polarity);
+	} else {
+		pr_err("AT91: PM: no ULP1 wakeup sources found!");
+	}
+
+	return mode ? 0 : -EPERM;
+}
+
+static int at91_sama5d2_config_shdwc_ws(void __iomem *shdwc, u32 *mode,
+					u32 *polarity)
+{
+	u32 val;
+
+	/* SHDWC.WUIR */
+	val = readl(shdwc + 0x0c);
+	*mode |= (val & 0x3ff);
+	*polarity |= ((val >> 16) & 0x3ff);
+
+	return 0;
+}
+
+static int at91_sama5d2_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
+{
+	writel(mode, pmc + AT91_PMC_FSMR);
+	writel(polarity, pmc + AT91_PMC_FSPR);
+
+	return 0;
+}
+
+static int at91_sam9x60_config_pmc_ws(void __iomem *pmc, u32 mode, u32 polarity)
+{
+	writel(mode, pmc + AT91_PMC_FSMR);
+
+	return 0;
+}
+
+static bool at91_pm_eth_quirk_is_valid(struct at91_pm_quirk_eth *eth)
+{
+	struct platform_device *pdev;
+
+	/* Interface NA in DT. */
+	if (!eth->np)
+		return false;
+
+	/* No quirks for this interface and current suspend mode. */
+	if (!(eth->modes & BIT(soc_pm.data.mode)))
+		return false;
+
+	if (!eth->dev) {
+		/* Driver not probed. */
+		pdev = of_find_device_by_node(eth->np);
+		if (!pdev)
+			return false;
+		/* put_device(eth->dev) is called at the end of suspend. */
+		eth->dev = &pdev->dev;
+	}
+
+	/* No quirks if device isn't a wakeup source. */
+	if (!device_may_wakeup(eth->dev))
+		return false;
+
+	return true;
+}
+
+static int at91_pm_config_quirks(bool suspend)
+{
+	struct at91_pm_quirk_eth *eth;
+	int i, j, ret, tmp;
+
+	/*
+	 * Ethernet IPs who's device_node pointers are stored into
+	 * soc_pm.quirks.eth[].np cannot handle WoL packets while in ULP0, ULP1
+	 * or both due to a hardware bug. If they receive WoL packets while in
+	 * ULP0 or ULP1 IPs could stop working or the whole system could stop
+	 * working. We cannot handle this scenario in the ethernet driver itself
+	 * as the driver is common to multiple vendors and also we only know
+	 * here, in this file, if we suspend to ULP0 or ULP1 mode. Thus handle
+	 * these scenarios here, as quirks.
+	 */
+	for (i = 0; i < AT91_PM_MAX_ETH; i++) {
+		eth = &soc_pm.quirks.eth[i];
+
+		if (!at91_pm_eth_quirk_is_valid(eth))
+			continue;
+
+		/*
+		 * For modes in dns_modes mask the system blocks if quirk is not
+		 * applied but if applied the interface doesn't act at WoL
+		 * events. Thus take care to avoid suspending if this interface
+		 * is the only configured wakeup source.
+		 */
+		if (suspend && eth->dns_modes & BIT(soc_pm.data.mode)) {
+			int ws_count = 0;
+#ifdef CONFIG_PM_SLEEP
+			struct wakeup_source *ws;
+
+			for_each_wakeup_source(ws) {
+				if (ws->dev == eth->dev)
+					continue;
+
+				ws_count++;
+				break;
+			}
+#endif
+
+			/*
+			 * Checking !ws is good for all platforms with issues
+			 * even when both G_ETH and E_ETH are available as dns_modes
+			 * is populated only on G_ETH interface.
+			 */
+			if (!ws_count) {
+				pr_err("AT91: PM: Ethernet cannot resume from WoL!");
+				ret = -EPERM;
+				put_device(eth->dev);
+				eth->dev = NULL;
+				/* No need to revert clock settings for this eth. */
+				i--;
+				goto clk_unconfigure;
+			}
+		}
+
+		if (suspend) {
+			clk_bulk_disable_unprepare(AT91_PM_ETH_MAX_CLK, eth->clks);
+		} else {
+			ret = clk_bulk_prepare_enable(AT91_PM_ETH_MAX_CLK,
+						      eth->clks);
+			if (ret)
+				goto clk_unconfigure;
+			/*
+			 * Release the reference to eth->dev taken in
+			 * at91_pm_eth_quirk_is_valid().
+			 */
+			put_device(eth->dev);
+			eth->dev = NULL;
+		}
+	}
+
+	return 0;
+
+clk_unconfigure:
+	/*
+	 * In case of resume we reach this point if clk_prepare_enable() failed.
+	 * we don't want to revert the previous clk_prepare_enable() for the
+	 * other IP.
+	 */
+	for (j = i; j >= 0; j--) {
+		eth = &soc_pm.quirks.eth[j];
+		if (suspend) {
+			if (!at91_pm_eth_quirk_is_valid(eth))
+				continue;
+
+			tmp = clk_bulk_prepare_enable(AT91_PM_ETH_MAX_CLK, eth->clks);
+			if (tmp) {
+				pr_err("AT91: PM: failed to enable %s clocks\n",
+				       j == AT91_PM_G_ETH ? "geth" : "eth");
+			}
+		}
+
+		/*
+		 * Release the reference to eth->dev taken in
+		 * at91_pm_eth_quirk_is_valid().
+		 */
+		put_device(eth->dev);
+		eth->dev = NULL;
+	}
+
+	return ret;
+}
+
+/*
+ * Called after processes are frozen, but before we shutdown devices.
+ */
+static int at91_pm_begin(suspend_state_t state)
+{
+	int ret;
+
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		soc_pm.data.mode = soc_pm.data.suspend_mode;
+		break;
+
+	case PM_SUSPEND_STANDBY:
+		soc_pm.data.mode = soc_pm.data.standby_mode;
+		break;
+
+	default:
+		soc_pm.data.mode = -1;
+	}
+
+	ret = at91_pm_config_ws(soc_pm.data.mode, true);
+	if (ret)
+		return ret;
+
+	if (soc_pm.data.mode == AT91_PM_BACKUP)
+		soc_pm.bu->suspended = 1;
+	else if (soc_pm.bu)
+		soc_pm.bu->suspended = 0;
+
+	return 0;
+}
+
+/*
+ * Verify that all the clocks are correct before entering
+ * slow-clock mode.
+ */
+static int at91_pm_verify_clocks(void)
+{
+	unsigned long scsr;
+	int i;
+
+	scsr = readl(soc_pm.data.pmc + AT91_PMC_SCSR);
+
+	/* USB must not be using PLLB */
+	if ((scsr & soc_pm.data.uhp_udp_mask) != 0) {
+		pr_err("AT91: PM - Suspend-to-RAM with USB still active\n");
+		return 0;
+	}
+
+	/* PCK0..PCK3 must be disabled, or configured to use clk32k */
+	for (i = 0; i < 4; i++) {
+		u32 css;
+
+		if ((scsr & (AT91_PMC_PCK0 << i)) == 0)
+			continue;
+		css = readl(soc_pm.data.pmc + AT91_PMC_PCKR(i)) & AT91_PMC_CSS;
+		if (css != AT91_PMC_CSS_SLOW) {
+			pr_err("AT91: PM - Suspend-to-RAM with PCK%d src %d\n", i, css);
+			return 0;
+		}
+	}
+
+	return 1;
+}
+
+/*
+ * Call this from platform driver suspend() to see how deeply to suspend.
+ * For example, some controllers (like OHCI) need one of the PLL clocks
+ * in order to act as a wakeup source, and those are not available when
+ * going into slow clock mode.
+ *
+ * REVISIT: generalize as clk_will_be_available(clk)?  Other platforms have
+ * the very same problem (but not using at91 main_clk), and it'd be better
+ * to add one generic API rather than lots of platform-specific ones.
+ */
+int at91_suspend_entering_slow_clock(void)
+{
+	return (soc_pm.data.mode >= AT91_PM_ULP0);
+}
+EXPORT_SYMBOL(at91_suspend_entering_slow_clock);
+
+static void (*at91_suspend_sram_fn)(struct at91_pm_data *);
+extern void at91_pm_suspend_in_sram(struct at91_pm_data *pm_data);
+extern u32 at91_pm_suspend_in_sram_sz;
+
+static int at91_suspend_finish(unsigned long val)
+{
+	unsigned char modified_gray_code[] = {
+		0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d,
+		0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b,
+		0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13,
+		0x10, 0x11,
+	};
+	unsigned int tmp, index;
+	int i;
+
+	if (soc_pm.data.mode == AT91_PM_BACKUP && soc_pm.data.ramc_phy) {
+		/*
+		 * Bootloader will perform DDR recalibration and will try to
+		 * restore the ZQ0SR0 with the value saved here. But the
+		 * calibration is buggy and restoring some values from ZQ0SR0
+		 * is forbidden and risky thus we need to provide processed
+		 * values for these (modified gray code values).
+		 */
+		tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
+
+		/* Store pull-down output impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index];
+
+		/* Store pull-up output impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/* Store pull-down on-die termination impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/* Store pull-up on-die termination impedance select. */
+		index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+
+		/*
+		 * The 1st 8 words of memory might get corrupted in the process
+		 * of DDR PHY recalibration; it is saved here in securam and it
+		 * will be restored later, after recalibration, by bootloader
+		 */
+		for (i = 1; i < BACKUP_DDR_PHY_CALIBRATION; i++)
+			soc_pm.bu->ddr_phy_calibration[i] =
+				*((unsigned int *)soc_pm.memcs + (i - 1));
+	}
+
+	flush_cache_all();
+	outer_disable();
+
+	at91_suspend_sram_fn(&soc_pm.data);
+
+	return 0;
+}
+
+static void at91_pm_switch_ba_to_vbat(void)
+{
+	unsigned int offset = offsetof(struct at91_pm_sfrbu_regs, pswbu);
+	unsigned int val;
+
+	/* Just for safety. */
+	if (!soc_pm.data.sfrbu)
+		return;
+
+	val = readl(soc_pm.data.sfrbu + offset);
+
+	/* Already on VBAT. */
+	if (!(val & soc_pm.sfrbu_regs.pswbu.state))
+		return;
+
+	val &= ~soc_pm.sfrbu_regs.pswbu.softsw;
+	val |= soc_pm.sfrbu_regs.pswbu.key | soc_pm.sfrbu_regs.pswbu.ctrl;
+	writel(val, soc_pm.data.sfrbu + offset);
+
+	/* Wait for update. */
+	val = readl(soc_pm.data.sfrbu + offset);
+	while (val & soc_pm.sfrbu_regs.pswbu.state)
+		val = readl(soc_pm.data.sfrbu + offset);
+}
+
+static void at91_pm_suspend(suspend_state_t state)
+{
+	if (soc_pm.data.mode == AT91_PM_BACKUP) {
+		at91_pm_switch_ba_to_vbat();
+
+		cpu_suspend(0, at91_suspend_finish);
+
+		/* The SRAM is lost between suspend cycles */
+		at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
+					     &at91_pm_suspend_in_sram,
+					     at91_pm_suspend_in_sram_sz);
+	} else {
+		at91_suspend_finish(0);
+	}
+
+	outer_resume();
+}
+
+/*
+ * STANDBY mode has *all* drivers suspended; ignores irqs not marked as 'wakeup'
+ * event sources; and reduces DRAM power.  But otherwise it's identical to
+ * PM_SUSPEND_ON: cpu idle, and nothing fancy done with main or cpu clocks.
+ *
+ * AT91_PM_ULP0 is like STANDBY plus slow clock mode, so drivers must
+ * suspend more deeply, the master clock switches to the clk32k and turns off
+ * the main oscillator
+ *
+ * AT91_PM_BACKUP turns off the whole SoC after placing the DDR in self refresh
+ */
+static int at91_pm_enter(suspend_state_t state)
+{
+	int ret;
+
+	ret = at91_pm_config_quirks(true);
+	if (ret)
+		return ret;
+
+	switch (state) {
+	case PM_SUSPEND_MEM:
+	case PM_SUSPEND_STANDBY:
+		/*
+		 * Ensure that clocks are in a valid state.
+		 */
+		if (soc_pm.data.mode >= AT91_PM_ULP0 &&
+		    !at91_pm_verify_clocks())
+			goto error;
+
+		at91_pm_suspend(state);
+
+		break;
+
+	case PM_SUSPEND_ON:
+		cpu_do_idle();
+		break;
+
+	default:
+		pr_debug("AT91: PM - bogus suspend state %d\n", state);
+		goto error;
+	}
+
+error:
+	at91_pm_config_quirks(false);
+	return 0;
+}
+
+/*
+ * Called right prior to thawing processes.
+ */
+static void at91_pm_end(void)
+{
+	at91_pm_config_ws(soc_pm.data.mode, false);
+}
+
+
+static const struct platform_suspend_ops at91_pm_ops = {
+	.valid	= at91_pm_valid_state,
+	.begin	= at91_pm_begin,
+	.enter	= at91_pm_enter,
+	.end	= at91_pm_end,
+};
+
+static struct platform_device at91_cpuidle_device = {
+	.name = "cpuidle-at91",
+};
+
+/*
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
+ * terminate self-refresh automatically on the next SDRAM access.
+ *
+ * Self-refresh mode is exited as soon as a memory access is made, but we don't
+ * know for sure when that happens. However, we need to restore the low-power
+ * mode if it was enabled before going idle. Restoring low-power mode while
+ * still in self-refresh is "not recommended", but seems to work.
+ */
+static void at91rm9200_standby(void)
+{
+	asm volatile(
+		"b    1f\n\t"
+		".align    5\n\t"
+		"1:  mcr    p15, 0, %0, c7, c10, 4\n\t"
+		"    str    %2, [%1, %3]\n\t"
+		"    mcr    p15, 0, %0, c7, c0, 4\n\t"
+		:
+		: "r" (0), "r" (soc_pm.data.ramc[0]),
+		  "r" (1), "r" (AT91_MC_SDRAMC_SRR));
+}
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static void at91_ddr_standby(void)
+{
+	/* Those two values allow us to delay self-refresh activation
+	 * to the maximum. */
+	u32 lpr0, lpr1 = 0;
+	u32 mdr, saved_mdr0, saved_mdr1 = 0;
+	u32 saved_lpr0, saved_lpr1 = 0;
+
+	/* LPDDR1 --> force DDR2 mode during self-refresh */
+	saved_mdr0 = at91_ramc_read(0, AT91_DDRSDRC_MDR);
+	if ((saved_mdr0 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
+		mdr = saved_mdr0 & ~AT91_DDRSDRC_MD;
+		mdr |= AT91_DDRSDRC_MD_DDR2;
+		at91_ramc_write(0, AT91_DDRSDRC_MDR, mdr);
+	}
+
+	if (soc_pm.data.ramc[1]) {
+		saved_lpr1 = at91_ramc_read(1, AT91_DDRSDRC_LPR);
+		lpr1 = saved_lpr1 & ~AT91_DDRSDRC_LPCB;
+		lpr1 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+		saved_mdr1 = at91_ramc_read(1, AT91_DDRSDRC_MDR);
+		if ((saved_mdr1 & AT91_DDRSDRC_MD) == AT91_DDRSDRC_MD_LOW_POWER_DDR) {
+			mdr = saved_mdr1 & ~AT91_DDRSDRC_MD;
+			mdr |= AT91_DDRSDRC_MD_DDR2;
+			at91_ramc_write(1, AT91_DDRSDRC_MDR, mdr);
+		}
+	}
+
+	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+	lpr0 |= AT91_DDRSDRC_LPCB_SELF_REFRESH;
+
+	/* self-refresh mode now */
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+	if (soc_pm.data.ramc[1])
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, lpr1);
+
+	cpu_do_idle();
+
+	at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr0);
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
+	if (soc_pm.data.ramc[1]) {
+		at91_ramc_write(0, AT91_DDRSDRC_MDR, saved_mdr1);
+		at91_ramc_write(1, AT91_DDRSDRC_LPR, saved_lpr1);
+	}
+}
+
+static void sama5d3_ddr_standby(void)
+{
+	u32 lpr0;
+	u32 saved_lpr0;
+
+	saved_lpr0 = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_DDRSDRC_LPCB;
+	lpr0 |= AT91_DDRSDRC_LPCB_POWER_DOWN;
+
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr0);
+
+	cpu_do_idle();
+
+	at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr0);
+}
+
+/* We manage both DDRAM/SDRAM controllers, we need more than one value to
+ * remember.
+ */
+static void at91sam9_sdram_standby(void)
+{
+	u32 lpr0, lpr1 = 0;
+	u32 saved_lpr0, saved_lpr1 = 0;
+
+	if (soc_pm.data.ramc[1]) {
+		saved_lpr1 = at91_ramc_read(1, AT91_SDRAMC_LPR);
+		lpr1 = saved_lpr1 & ~AT91_SDRAMC_LPCB;
+		lpr1 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+	}
+
+	saved_lpr0 = at91_ramc_read(0, AT91_SDRAMC_LPR);
+	lpr0 = saved_lpr0 & ~AT91_SDRAMC_LPCB;
+	lpr0 |= AT91_SDRAMC_LPCB_SELF_REFRESH;
+
+	/* self-refresh mode now */
+	at91_ramc_write(0, AT91_SDRAMC_LPR, lpr0);
+	if (soc_pm.data.ramc[1])
+		at91_ramc_write(1, AT91_SDRAMC_LPR, lpr1);
+
+	cpu_do_idle();
+
+	at91_ramc_write(0, AT91_SDRAMC_LPR, saved_lpr0);
+	if (soc_pm.data.ramc[1])
+		at91_ramc_write(1, AT91_SDRAMC_LPR, saved_lpr1);
+}
+
+static void sama7g5_standby(void)
+{
+	int pwrtmg, ratio;
+
+	pwrtmg = readl(soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+	ratio = readl(soc_pm.data.pmc + AT91_PMC_RATIO);
+
+	/*
+	 * Place RAM into self-refresh after a maximum idle clocks. The maximum
+	 * idle clocks is configured by bootloader in
+	 * UDDRC_PWRMGT.SELFREF_TO_X32.
+	 */
+	writel(pwrtmg | UDDRC_PWRCTL_SELFREF_EN,
+	       soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+	/* Divide CPU clock by 16. */
+	writel(ratio & ~AT91_PMC_RATIO_RATIO, soc_pm.data.pmc + AT91_PMC_RATIO);
+
+	cpu_do_idle();
+
+	/* Restore previous configuration. */
+	writel(ratio, soc_pm.data.pmc + AT91_PMC_RATIO);
+	writel(pwrtmg, soc_pm.data.ramc[0] + UDDRC_PWRCTL);
+}
+
+struct ramc_info {
+	void (*idle)(void);
+	unsigned int memctrl;
+};
+
+static const struct ramc_info ramc_infos[] __initconst = {
+	{ .idle = at91rm9200_standby, .memctrl = AT91_MEMCTRL_MC},
+	{ .idle = at91sam9_sdram_standby, .memctrl = AT91_MEMCTRL_SDRAMC},
+	{ .idle = at91_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
+	{ .idle = sama5d3_ddr_standby, .memctrl = AT91_MEMCTRL_DDRSDR},
+	{ .idle = sama7g5_standby, },
+};
+
+static const struct of_device_id ramc_ids[] __initconst = {
+	{ .compatible = "atmel,at91rm9200-sdramc", .data = &ramc_infos[0] },
+	{ .compatible = "atmel,at91sam9260-sdramc", .data = &ramc_infos[1] },
+	{ .compatible = "atmel,at91sam9g45-ddramc", .data = &ramc_infos[2] },
+	{ .compatible = "atmel,sama5d3-ddramc", .data = &ramc_infos[3] },
+	{ .compatible = "microchip,sama7g5-uddrc", .data = &ramc_infos[4], },
+	{ /*sentinel*/ }
+};
+
+static const struct of_device_id ramc_phy_ids[] __initconst = {
+	{ .compatible = "microchip,sama7g5-ddr3phy", },
+	{ /* Sentinel. */ },
+};
+
+static __init int at91_dt_ramc(bool phy_mandatory)
+{
+	struct device_node *np;
+	const struct of_device_id *of_id;
+	int idx = 0;
+	void *standby = NULL;
+	const struct ramc_info *ramc;
+	int ret;
+
+	for_each_matching_node_and_match(np, ramc_ids, &of_id) {
+		soc_pm.data.ramc[idx] = of_iomap(np, 0);
+		if (!soc_pm.data.ramc[idx]) {
+			pr_err("unable to map ramc[%d] cpu registers\n", idx);
+			ret = -ENOMEM;
+			of_node_put(np);
+			goto unmap_ramc;
+		}
+
+		ramc = of_id->data;
+		if (ramc) {
+			if (!standby)
+				standby = ramc->idle;
+			soc_pm.data.memctrl = ramc->memctrl;
+		}
+
+		idx++;
+	}
+
+	if (!idx) {
+		pr_err("unable to find compatible ram controller node in dtb\n");
+		ret = -ENODEV;
+		goto unmap_ramc;
+	}
+
+	/* Lookup for DDR PHY node, if any. */
+	for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) {
+		soc_pm.data.ramc_phy = of_iomap(np, 0);
+		if (!soc_pm.data.ramc_phy) {
+			pr_err("unable to map ramc phy cpu registers\n");
+			ret = -ENOMEM;
+			of_node_put(np);
+			goto unmap_ramc;
+		}
+	}
+
+	if (phy_mandatory && !soc_pm.data.ramc_phy) {
+		pr_err("DDR PHY is mandatory!\n");
+		ret = -ENODEV;
+		goto unmap_ramc;
+	}
+
+	if (!standby) {
+		pr_warn("ramc no standby function available\n");
+		return 0;
+	}
+
+	at91_cpuidle_device.dev.platform_data = standby;
+
+	return 0;
+
+unmap_ramc:
+	while (idx)
+		iounmap(soc_pm.data.ramc[--idx]);
+
+	return ret;
+}
+
+static void at91rm9200_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+	writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
+}
+
+static void at91sam9_idle(void)
+{
+	writel(AT91_PMC_PCK, soc_pm.data.pmc + AT91_PMC_SCDR);
+	cpu_do_idle();
+}
+
+static void __init at91_pm_sram_init(void)
+{
+	struct gen_pool *sram_pool;
+	phys_addr_t sram_pbase;
+	unsigned long sram_base;
+	struct device_node *node;
+	struct platform_device *pdev = NULL;
+
+	for_each_compatible_node(node, NULL, "mmio-sram") {
+		pdev = of_find_device_by_node(node);
+		if (pdev) {
+			of_node_put(node);
+			break;
+		}
+	}
+
+	if (!pdev) {
+		pr_warn("%s: failed to find sram device!\n", __func__);
+		return;
+	}
+
+	sram_pool = gen_pool_get(&pdev->dev, NULL);
+	if (!sram_pool) {
+		pr_warn("%s: sram pool unavailable!\n", __func__);
+		goto out_put_device;
+	}
+
+	sram_base = gen_pool_alloc(sram_pool, at91_pm_suspend_in_sram_sz);
+	if (!sram_base) {
+		pr_warn("%s: unable to alloc sram!\n", __func__);
+		goto out_put_device;
+	}
+
+	sram_pbase = gen_pool_virt_to_phys(sram_pool, sram_base);
+	at91_suspend_sram_fn = __arm_ioremap_exec(sram_pbase,
+					at91_pm_suspend_in_sram_sz, false);
+	if (!at91_suspend_sram_fn) {
+		pr_warn("SRAM: Could not map\n");
+		goto out_put_device;
+	}
+
+	/* Copy the pm suspend handler to SRAM */
+	at91_suspend_sram_fn = fncpy(at91_suspend_sram_fn,
+			&at91_pm_suspend_in_sram, at91_pm_suspend_in_sram_sz);
+	return;
+
+out_put_device:
+	put_device(&pdev->dev);
+	return;
+}
+
+static bool __init at91_is_pm_mode_active(int pm_mode)
+{
+	return (soc_pm.data.standby_mode == pm_mode ||
+		soc_pm.data.suspend_mode == pm_mode);
+}
+
+static int __init at91_pm_backup_scan_memcs(unsigned long node,
+					    const char *uname, int depth,
+					    void *data)
+{
+	const char *type;
+	const __be32 *reg;
+	int *located = data;
+	int size;
+
+	/* Memory node already located. */
+	if (*located)
+		return 0;
+
+	type = of_get_flat_dt_prop(node, "device_type", NULL);
+
+	/* We are scanning "memory" nodes only. */
+	if (!type || strcmp(type, "memory"))
+		return 0;
+
+	reg = of_get_flat_dt_prop(node, "reg", &size);
+	if (reg) {
+		soc_pm.memcs = __va((phys_addr_t)be32_to_cpu(*reg));
+		*located = 1;
+	}
+
+	return 0;
+}
+
+static int __init at91_pm_backup_init(void)
+{
+	struct gen_pool *sram_pool;
+	struct device_node *np;
+	struct platform_device *pdev;
+	int ret = -ENODEV, located = 0;
+
+	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2) &&
+	    !IS_ENABLED(CONFIG_SOC_SAMA7G5))
+		return -EPERM;
+
+	if (!at91_is_pm_mode_active(AT91_PM_BACKUP))
+		return 0;
+
+	np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-securam");
+	if (!np)
+		return ret;
+
+	pdev = of_find_device_by_node(np);
+	of_node_put(np);
+	if (!pdev) {
+		pr_warn("%s: failed to find securam device!\n", __func__);
+		return ret;
+	}
+
+	sram_pool = gen_pool_get(&pdev->dev, NULL);
+	if (!sram_pool) {
+		pr_warn("%s: securam pool unavailable!\n", __func__);
+		goto securam_fail;
+	}
+
+	soc_pm.bu = (void *)gen_pool_alloc(sram_pool, sizeof(struct at91_pm_bu));
+	if (!soc_pm.bu) {
+		pr_warn("%s: unable to alloc securam!\n", __func__);
+		ret = -ENOMEM;
+		goto securam_fail;
+	}
+
+	soc_pm.bu->suspended = 0;
+	soc_pm.bu->canary = __pa_symbol(&canary);
+	soc_pm.bu->resume = __pa_symbol(cpu_resume);
+	if (soc_pm.data.ramc_phy) {
+		of_scan_flat_dt(at91_pm_backup_scan_memcs, &located);
+		if (!located)
+			goto securam_fail;
+	}
+
+	return 0;
+
+securam_fail:
+	put_device(&pdev->dev);
+	return ret;
+}
+
+static void __init at91_pm_secure_init(void)
+{
+	int suspend_mode;
+	struct arm_smccc_res res;
+
+	suspend_mode = soc_pm.data.suspend_mode;
+
+	res = sam_smccc_call(SAMA5_SMC_SIP_SET_SUSPEND_MODE,
+			     suspend_mode, 0);
+	if (res.a0 == 0) {
+		pr_info("AT91: Secure PM: suspend mode set to %s\n",
+			pm_modes[suspend_mode].pattern);
+		return;
+	}
+
+	pr_warn("AT91: Secure PM: %s mode not supported !\n",
+		pm_modes[suspend_mode].pattern);
+
+	res = sam_smccc_call(SAMA5_SMC_SIP_GET_SUSPEND_MODE, 0, 0);
+	if (res.a0 == 0) {
+		pr_warn("AT91: Secure PM: failed to get default mode\n");
+		return;
+	}
+
+	pr_info("AT91: Secure PM: using default suspend mode %s\n",
+		pm_modes[suspend_mode].pattern);
+
+	soc_pm.data.suspend_mode = res.a1;
+}
+static const struct of_device_id atmel_shdwc_ids[] = {
+	{ .compatible = "atmel,sama5d2-shdwc" },
+	{ .compatible = "microchip,sam9x60-shdwc" },
+	{ .compatible = "microchip,sama7g5-shdwc" },
+	{ /* sentinel. */ }
+};
+
+static const struct of_device_id gmac_ids[] __initconst = {
+	{ .compatible = "atmel,sama5d3-gem" },
+	{ .compatible = "atmel,sama5d2-gem" },
+	{ .compatible = "atmel,sama5d29-gem" },
+	{ .compatible = "microchip,sama7g5-gem" },
+	{ },
+};
+
+static const struct of_device_id emac_ids[] __initconst = {
+	{ .compatible = "atmel,sama5d3-macb" },
+	{ .compatible = "microchip,sama7g5-emac" },
+	{ },
+};
+
+/*
+ * Replaces _mode_to_replace with a supported mode that doesn't depend
+ * on controller pointed by _map_bitmask
+ * @_maps: u32 array containing AT91_PM_IOMAP() flags and indexed by AT91
+ * PM mode
+ * @_map_bitmask: AT91_PM_IOMAP() bitmask; if _mode_to_replace depends on
+ * controller represented by _map_bitmask, _mode_to_replace needs to be
+ * updated
+ * @_mode_to_replace: standby_mode or suspend_mode that need to be
+ * updated
+ * @_mode_to_check: standby_mode or suspend_mode; this is needed here
+ * to avoid having standby_mode and suspend_mode set with the same AT91
+ * PM mode
+ */
+#define AT91_PM_REPLACE_MODE(_maps, _map_bitmask, _mode_to_replace,	\
+			     _mode_to_check)				\
+	do {								\
+		if (((_maps)[(_mode_to_replace)]) & (_map_bitmask)) {	\
+			int _mode_to_use, _mode_complementary;		\
+			/* Use ULP0 if it doesn't need _map_bitmask. */	\
+			if (!((_maps)[AT91_PM_ULP0] & (_map_bitmask))) {\
+				_mode_to_use = AT91_PM_ULP0;		\
+				_mode_complementary = AT91_PM_STANDBY;	\
+			} else {					\
+				_mode_to_use = AT91_PM_STANDBY;		\
+				_mode_complementary = AT91_PM_STANDBY;	\
+			}						\
+									\
+			if ((_mode_to_check) != _mode_to_use)		\
+				(_mode_to_replace) = _mode_to_use;	\
+			else						\
+				(_mode_to_replace) = _mode_complementary;\
+		}							\
+	} while (0)
+
+/*
+ * Replaces standby and suspend modes with default supported modes:
+ * ULP0 and STANDBY.
+ * @_maps: u32 array indexed by AT91 PM mode containing AT91_PM_IOMAP()
+ * flags
+ * @_map: controller specific name; standby and suspend mode need to be
+ * replaced in order to not depend on this controller
+ */
+#define AT91_PM_REPLACE_MODES(_maps, _map)				\
+	do {								\
+		AT91_PM_REPLACE_MODE((_maps), BIT(AT91_PM_IOMAP_##_map),\
+				     (soc_pm.data.standby_mode),	\
+				     (soc_pm.data.suspend_mode));	\
+		AT91_PM_REPLACE_MODE((_maps), BIT(AT91_PM_IOMAP_##_map),\
+				     (soc_pm.data.suspend_mode),	\
+				     (soc_pm.data.standby_mode));	\
+	} while (0)
+
+static int __init at91_pm_get_eth_clks(struct device_node *np,
+				       struct clk_bulk_data *clks)
+{
+	clks[AT91_PM_ETH_PCLK].clk = of_clk_get_by_name(np, "pclk");
+	if (IS_ERR(clks[AT91_PM_ETH_PCLK].clk))
+		return PTR_ERR(clks[AT91_PM_ETH_PCLK].clk);
+
+	clks[AT91_PM_ETH_HCLK].clk = of_clk_get_by_name(np, "hclk");
+	if (IS_ERR(clks[AT91_PM_ETH_HCLK].clk))
+		return PTR_ERR(clks[AT91_PM_ETH_HCLK].clk);
+
+	return 0;
+}
+
+static int __init at91_pm_eth_clks_empty(struct clk_bulk_data *clks)
+{
+	return IS_ERR(clks[AT91_PM_ETH_PCLK].clk) ||
+	       IS_ERR(clks[AT91_PM_ETH_HCLK].clk);
+}
+
+static void __init at91_pm_modes_init(const u32 *maps, int len)
+{
+	struct at91_pm_quirk_eth *gmac = &soc_pm.quirks.eth[AT91_PM_G_ETH];
+	struct at91_pm_quirk_eth *emac = &soc_pm.quirks.eth[AT91_PM_E_ETH];
+	struct device_node *np;
+	int ret;
+
+	ret = at91_pm_backup_init();
+	if (ret) {
+		if (soc_pm.data.standby_mode == AT91_PM_BACKUP)
+			soc_pm.data.standby_mode = AT91_PM_ULP0;
+		if (soc_pm.data.suspend_mode == AT91_PM_BACKUP)
+			soc_pm.data.suspend_mode = AT91_PM_ULP0;
+	}
+
+	if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
+	    maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC)) {
+		np = of_find_matching_node(NULL, atmel_shdwc_ids);
+		if (!np) {
+			pr_warn("%s: failed to find shdwc!\n", __func__);
+			AT91_PM_REPLACE_MODES(maps, SHDWC);
+		} else {
+			soc_pm.data.shdwc = of_iomap(np, 0);
+			of_node_put(np);
+		}
+	}
+
+	if (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) ||
+	    maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU)) {
+		np = of_find_compatible_node(NULL, NULL, "atmel,sama5d2-sfrbu");
+		if (!np) {
+			pr_warn("%s: failed to find sfrbu!\n", __func__);
+			AT91_PM_REPLACE_MODES(maps, SFRBU);
+		} else {
+			soc_pm.data.sfrbu = of_iomap(np, 0);
+			of_node_put(np);
+		}
+	}
+
+	if ((at91_is_pm_mode_active(AT91_PM_ULP1) ||
+	     at91_is_pm_mode_active(AT91_PM_ULP0) ||
+	     at91_is_pm_mode_active(AT91_PM_ULP0_FAST)) &&
+	    (maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(ETHC) ||
+	     maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(ETHC))) {
+		np = of_find_matching_node(NULL, gmac_ids);
+		if (!np) {
+			np = of_find_matching_node(NULL, emac_ids);
+			if (np)
+				goto get_emac_clks;
+			AT91_PM_REPLACE_MODES(maps, ETHC);
+			goto unmap_unused_nodes;
+		} else {
+			gmac->np = np;
+			at91_pm_get_eth_clks(np, gmac->clks);
+		}
+
+		np = of_find_matching_node(NULL, emac_ids);
+		if (!np) {
+			if (at91_pm_eth_clks_empty(gmac->clks))
+				AT91_PM_REPLACE_MODES(maps, ETHC);
+		} else {
+get_emac_clks:
+			emac->np = np;
+			ret = at91_pm_get_eth_clks(np, emac->clks);
+			if (ret && at91_pm_eth_clks_empty(gmac->clks)) {
+				of_node_put(gmac->np);
+				of_node_put(emac->np);
+				gmac->np = NULL;
+				emac->np = NULL;
+			}
+		}
+	}
+
+unmap_unused_nodes:
+	/* Unmap all unnecessary. */
+	if (soc_pm.data.shdwc &&
+	    !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SHDWC) ||
+	      maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SHDWC))) {
+		iounmap(soc_pm.data.shdwc);
+		soc_pm.data.shdwc = NULL;
+	}
+
+	if (soc_pm.data.sfrbu &&
+	    !(maps[soc_pm.data.standby_mode] & AT91_PM_IOMAP(SFRBU) ||
+	      maps[soc_pm.data.suspend_mode] & AT91_PM_IOMAP(SFRBU))) {
+		iounmap(soc_pm.data.sfrbu);
+		soc_pm.data.sfrbu = NULL;
+	}
+
+	return;
+}
+
+struct pmc_info {
+	unsigned long uhp_udp_mask;
+	unsigned long mckr;
+	unsigned long version;
+};
+
+static const struct pmc_info pmc_infos[] __initconst = {
+	{
+		.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+	{	.uhp_udp_mask = 0,
+		.mckr = 0x30,
+		.version = AT91_PMC_V1,
+	},
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.mckr = 0x28,
+		.version = AT91_PMC_V2,
+	},
+	{
+		.mckr = 0x28,
+		.version = AT91_PMC_V2,
+	},
+
+};
+
+static const struct of_device_id atmel_pmc_ids[] __initconst = {
+	{ .compatible = "atmel,at91rm9200-pmc", .data = &pmc_infos[0] },
+	{ .compatible = "atmel,at91sam9260-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "atmel,at91sam9261-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "atmel,at91sam9263-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "atmel,at91sam9g45-pmc", .data = &pmc_infos[2] },
+	{ .compatible = "atmel,at91sam9n12-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "atmel,at91sam9rl-pmc", .data = &pmc_infos[3] },
+	{ .compatible = "atmel,at91sam9x5-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
+	{ .compatible = "microchip,sama7g5-pmc", .data = &pmc_infos[5] },
+	{ /* sentinel */ },
+};
+
+static void __init at91_pm_modes_validate(const int *modes, int len)
+{
+	u8 i, standby = 0, suspend = 0;
+	int mode;
+
+	for (i = 0; i < len; i++) {
+		if (standby && suspend)
+			break;
+
+		if (modes[i] == soc_pm.data.standby_mode && !standby) {
+			standby = 1;
+			continue;
+		}
+
+		if (modes[i] == soc_pm.data.suspend_mode && !suspend) {
+			suspend = 1;
+			continue;
+		}
+	}
+
+	if (!standby) {
+		if (soc_pm.data.suspend_mode == AT91_PM_STANDBY)
+			mode = AT91_PM_ULP0;
+		else
+			mode = AT91_PM_STANDBY;
+
+		pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
+			pm_modes[soc_pm.data.standby_mode].pattern,
+			pm_modes[mode].pattern);
+		soc_pm.data.standby_mode = mode;
+	}
+
+	if (!suspend) {
+		if (soc_pm.data.standby_mode == AT91_PM_ULP0)
+			mode = AT91_PM_STANDBY;
+		else
+			mode = AT91_PM_ULP0;
+
+		pr_warn("AT91: PM: %s mode not supported! Using %s.\n",
+			pm_modes[soc_pm.data.suspend_mode].pattern,
+			pm_modes[mode].pattern);
+		soc_pm.data.suspend_mode = mode;
+	}
+}
+
+static void __init at91_pm_init(void (*pm_idle)(void))
+{
+	struct device_node *pmc_np;
+	const struct of_device_id *of_id;
+	const struct pmc_info *pmc;
+
+	if (at91_cpuidle_device.dev.platform_data)
+		platform_device_register(&at91_cpuidle_device);
+
+	pmc_np = of_find_matching_node_and_match(NULL, atmel_pmc_ids, &of_id);
+	soc_pm.data.pmc = of_iomap(pmc_np, 0);
+	of_node_put(pmc_np);
+	if (!soc_pm.data.pmc) {
+		pr_err("AT91: PM not supported, PMC not found\n");
+		return;
+	}
+
+	pmc = of_id->data;
+	soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
+	soc_pm.data.pmc_mckr_offset = pmc->mckr;
+	soc_pm.data.pmc_version = pmc->version;
+
+	if (pm_idle)
+		arm_pm_idle = pm_idle;
+
+	at91_pm_sram_init();
+
+	if (at91_suspend_sram_fn) {
+		suspend_set_ops(&at91_pm_ops);
+		pr_info("AT91: PM: standby: %s, suspend: %s\n",
+			pm_modes[soc_pm.data.standby_mode].pattern,
+			pm_modes[soc_pm.data.suspend_mode].pattern);
+	} else {
+		pr_info("AT91: PM not supported, due to no SRAM allocated\n");
+	}
+}
+
+void __init at91rm9200_pm_init(void)
+{
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_SOC_AT91RM9200))
+		return;
+
+	/*
+	 * Force STANDBY and ULP0 mode to avoid calling
+	 * at91_pm_modes_validate() which may increase booting time.
+	 * Platform supports anyway only STANDBY and ULP0 modes.
+	 */
+	soc_pm.data.standby_mode = AT91_PM_STANDBY;
+	soc_pm.data.suspend_mode = AT91_PM_ULP0;
+
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
+	/*
+	 * AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
+	 */
+	at91_ramc_write(0, AT91_MC_SDRAMC_LPR, 0);
+
+	at91_pm_init(at91rm9200_idle);
+}
+
+void __init sam9x60_pm_init(void)
+{
+	static const int modes[] __initconst = {
+		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
+	};
+	static const int iomaps[] __initconst = {
+		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SHDWC),
+	};
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_SOC_SAM9X60))
+		return;
+
+	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
+	at91_pm_init(NULL);
+
+	soc_pm.ws_ids = sam9x60_ws_ids;
+	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
+}
+
+void __init at91sam9_pm_init(void)
+{
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_SOC_AT91SAM9))
+		return;
+
+	/*
+	 * Force STANDBY and ULP0 mode to avoid calling
+	 * at91_pm_modes_validate() which may increase booting time.
+	 * Platform supports anyway only STANDBY and ULP0 modes.
+	 */
+	soc_pm.data.standby_mode = AT91_PM_STANDBY;
+	soc_pm.data.suspend_mode = AT91_PM_ULP0;
+
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
+	at91_pm_init(at91sam9_idle);
+}
+
+void __init sama5_pm_init(void)
+{
+	static const int modes[] __initconst = {
+		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST,
+	};
+	static const u32 iomaps[] __initconst = {
+		[AT91_PM_ULP0]		= AT91_PM_IOMAP(ETHC),
+		[AT91_PM_ULP0_FAST]	= AT91_PM_IOMAP(ETHC),
+	};
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_SOC_SAMA5))
+		return;
+
+	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
+	at91_pm_init(NULL);
+
+	/* Quirks applies to ULP0, ULP0 fast and ULP1 modes. */
+	soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP0) |
+						 BIT(AT91_PM_ULP0_FAST) |
+						 BIT(AT91_PM_ULP1);
+	/* Do not suspend in ULP0, ULP0 fast if GETH is the only wakeup source. */
+	soc_pm.quirks.eth[AT91_PM_G_ETH].dns_modes = BIT(AT91_PM_ULP0) |
+						     BIT(AT91_PM_ULP0_FAST);
+}
+
+void __init sama5d2_pm_init(void)
+{
+	static const int modes[] __initconst = {
+		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP0_FAST, AT91_PM_ULP1,
+		AT91_PM_BACKUP,
+	};
+	static const u32 iomaps[] __initconst = {
+		[AT91_PM_ULP0]		= AT91_PM_IOMAP(ETHC),
+		[AT91_PM_ULP0_FAST]	= AT91_PM_IOMAP(ETHC),
+		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SHDWC) |
+					  AT91_PM_IOMAP(ETHC),
+		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SHDWC) |
+					  AT91_PM_IOMAP(SFRBU),
+	};
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_SOC_SAMA5D2))
+		return;
+
+	if (IS_ENABLED(CONFIG_ATMEL_SECURE_PM)) {
+		pr_warn("AT91: Secure PM: ignoring standby mode\n");
+		at91_pm_secure_init();
+		return;
+	}
+
+	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+	ret = at91_dt_ramc(false);
+	if (ret)
+		return;
+
+	at91_pm_init(NULL);
+
+	soc_pm.ws_ids = sama5d2_ws_ids;
+	soc_pm.config_shdwc_ws = at91_sama5d2_config_shdwc_ws;
+	soc_pm.config_pmc_ws = at91_sama5d2_config_pmc_ws;
+
+	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
+	soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
+	soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
+	soc_pm.sfrbu_regs.pswbu.state = BIT(3);
+
+	/* Quirk applies to ULP0, ULP0 fast and ULP1 modes. */
+	soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP0) |
+						 BIT(AT91_PM_ULP0_FAST) |
+						 BIT(AT91_PM_ULP1);
+	/*
+	 * Do not suspend in ULP0, ULP0 fast if GETH is the only wakeup
+	 * source.
+	 */
+	soc_pm.quirks.eth[AT91_PM_G_ETH].dns_modes = BIT(AT91_PM_ULP0) |
+						     BIT(AT91_PM_ULP0_FAST);
+}
+
+void __init sama7_pm_init(void)
+{
+	static const int modes[] __initconst = {
+		AT91_PM_STANDBY, AT91_PM_ULP0, AT91_PM_ULP1, AT91_PM_BACKUP,
+	};
+	static const u32 iomaps[] __initconst = {
+		[AT91_PM_ULP0]		= AT91_PM_IOMAP(SFRBU),
+		[AT91_PM_ULP1]		= AT91_PM_IOMAP(SFRBU) |
+					  AT91_PM_IOMAP(SHDWC) |
+					  AT91_PM_IOMAP(ETHC),
+		[AT91_PM_BACKUP]	= AT91_PM_IOMAP(SFRBU) |
+					  AT91_PM_IOMAP(SHDWC),
+	};
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_SOC_SAMA7))
+		return;
+
+	at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
+
+	ret = at91_dt_ramc(true);
+	if (ret)
+		return;
+
+	at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
+	at91_pm_init(NULL);
+
+	soc_pm.ws_ids = sama7g5_ws_ids;
+	soc_pm.config_pmc_ws = at91_sam9x60_config_pmc_ws;
+
+	soc_pm.sfrbu_regs.pswbu.key = (0x4BD20C << 8);
+	soc_pm.sfrbu_regs.pswbu.ctrl = BIT(0);
+	soc_pm.sfrbu_regs.pswbu.softsw = BIT(1);
+	soc_pm.sfrbu_regs.pswbu.state = BIT(2);
+
+	/* Quirks applies to ULP1 for both Ethernet interfaces. */
+	soc_pm.quirks.eth[AT91_PM_E_ETH].modes = BIT(AT91_PM_ULP1);
+	soc_pm.quirks.eth[AT91_PM_G_ETH].modes = BIT(AT91_PM_ULP1);
+}
+
+static int __init at91_pm_modes_select(char *str)
+{
+	char *s;
+	substring_t args[MAX_OPT_ARGS];
+	int standby, suspend;
+
+	if (!str)
+		return 0;
+
+	s = strsep(&str, ",");
+	standby = match_token(s, pm_modes, args);
+	if (standby < 0)
+		return 0;
+
+	suspend = match_token(str, pm_modes, args);
+	if (suspend < 0)
+		return 0;
+
+	soc_pm.data.standby_mode = standby;
+	soc_pm.data.suspend_mode = suspend;
+
+	return 0;
+}
+early_param("atmel.pm_modes", at91_pm_modes_select);
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
new file mode 100644
index 000000000..53bdc9000
--- /dev/null
+++ b/arch/arm/mach-at91/pm.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * AT91 Power Management
+ *
+ * Copyright (C) 2005 David Brownell
+ */
+#ifndef __ARCH_ARM_MACH_AT91_PM
+#define __ARCH_ARM_MACH_AT91_PM
+
+#include <asm/proc-fns.h>
+
+#include <linux/mfd/syscon/atmel-mc.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+#include <soc/at91/at91sam9_sdramc.h>
+#include <soc/at91/sama7-ddr.h>
+#include <soc/at91/sama7-sfrbu.h>
+
+#define AT91_MEMCTRL_MC		0
+#define AT91_MEMCTRL_SDRAMC	1
+#define AT91_MEMCTRL_DDRSDR	2
+
+#define	AT91_PM_STANDBY		0x00
+#define AT91_PM_ULP0		0x01
+#define AT91_PM_ULP0_FAST	0x02
+#define AT91_PM_ULP1		0x03
+#define	AT91_PM_BACKUP		0x04
+
+#ifndef __ASSEMBLY__
+struct at91_pm_data {
+	void __iomem *pmc;
+	void __iomem *ramc[2];
+	void __iomem *ramc_phy;
+	unsigned long uhp_udp_mask;
+	unsigned int memctrl;
+	unsigned int mode;
+	void __iomem *shdwc;
+	void __iomem *sfrbu;
+	unsigned int standby_mode;
+	unsigned int suspend_mode;
+	unsigned int pmc_mckr_offset;
+	unsigned int pmc_version;
+};
+#endif
+
+#endif
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
new file mode 100644
index 000000000..40bd4e8fe
--- /dev/null
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <linux/stddef.h>
+#include <linux/kbuild.h>
+#include "pm.h"
+
+int main(void)
+{
+	DEFINE(PM_DATA_PMC,		offsetof(struct at91_pm_data, pmc));
+	DEFINE(PM_DATA_RAMC0,		offsetof(struct at91_pm_data, ramc[0]));
+	DEFINE(PM_DATA_RAMC1,		offsetof(struct at91_pm_data, ramc[1]));
+	DEFINE(PM_DATA_RAMC_PHY,	offsetof(struct at91_pm_data,
+						 ramc_phy));
+	DEFINE(PM_DATA_MEMCTRL,	offsetof(struct at91_pm_data, memctrl));
+	DEFINE(PM_DATA_MODE,		offsetof(struct at91_pm_data, mode));
+	DEFINE(PM_DATA_SHDWC,		offsetof(struct at91_pm_data, shdwc));
+	DEFINE(PM_DATA_SFRBU,		offsetof(struct at91_pm_data, sfrbu));
+	DEFINE(PM_DATA_PMC_MCKR_OFFSET,	offsetof(struct at91_pm_data,
+						 pmc_mckr_offset));
+	DEFINE(PM_DATA_PMC_VERSION,	offsetof(struct at91_pm_data,
+						 pmc_version));
+
+	return 0;
+}
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
new file mode 100644
index 000000000..e4904faf1
--- /dev/null
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -0,0 +1,1157 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * arch/arm/mach-at91/pm_slow_clock.S
+ *
+ *  Copyright (C) 2006 Savin Zlobec
+ *
+ * AT91SAM9 support:
+ *  Copyright (C) 2007 Anti Sullin <anti.sullin@artecdesign.ee>
+ */
+#include <linux/linkage.h>
+#include <linux/clk/at91_pmc.h>
+#include "pm.h"
+#include "pm_data-offsets.h"
+
+#define	SRAMC_SELF_FRESH_ACTIVE		0x01
+#define	SRAMC_SELF_FRESH_EXIT		0x00
+
+pmc	.req	r0
+tmp1	.req	r4
+tmp2	.req	r5
+tmp3	.req	r6
+
+/*
+ * Wait until master clock is ready (after switching master clock source)
+ *
+ * @r_mckid:	register holding master clock identifier
+ *
+ * Side effects: overwrites r7, r8
+ */
+	.macro wait_mckrdy r_mckid
+#ifdef CONFIG_SOC_SAMA7
+	cmp	\r_mckid, #0
+	beq	1f
+	mov	r7, #AT91_PMC_MCKXRDY
+	b	2f
+#endif
+1:	mov	r7, #AT91_PMC_MCKRDY
+2:	ldr	r8, [pmc, #AT91_PMC_SR]
+	and	r8, r7
+	cmp	r8, r7
+	bne	2b
+	.endm
+
+/*
+ * Wait until master oscillator has stabilized.
+ *
+ * Side effects: overwrites r7
+ */
+	.macro wait_moscrdy
+1:	ldr	r7, [pmc, #AT91_PMC_SR]
+	tst	r7, #AT91_PMC_MOSCS
+	beq	1b
+	.endm
+
+/*
+ * Wait for main oscillator selection is done
+ *
+ * Side effects: overwrites r7
+ */
+	.macro wait_moscsels
+1:	ldr	r7, [pmc, #AT91_PMC_SR]
+	tst	r7, #AT91_PMC_MOSCSELS
+	beq	1b
+	.endm
+
+/*
+ * Put the processor to enter the idle state
+ *
+ * Side effects: overwrites r7
+ */
+	.macro at91_cpu_idle
+
+#if defined(CONFIG_CPU_V7)
+	mov	r7, #AT91_PMC_PCK
+	str	r7, [pmc, #AT91_PMC_SCDR]
+
+	dsb
+
+	wfi		@ Wait For Interrupt
+#else
+	mcr	p15, 0, tmp1, c7, c0, 4
+#endif
+
+	.endm
+
+/**
+ * Set state for 2.5V low power regulator
+ * @ena: 0 - disable regulator
+ *	 1 - enable regulator
+ *
+ * Side effects: overwrites r7, r8, r9, r10
+ */
+	.macro at91_2_5V_reg_set_low_power ena
+#ifdef CONFIG_SOC_SAMA7
+	ldr	r7, .sfrbu
+	mov	r8, #\ena
+	ldr	r9, [r7, #AT91_SFRBU_25LDOCR]
+	orr	r9, r9, #AT91_SFRBU_25LDOCR_LP
+	cmp	r8, #1
+	beq	lp_done_\ena
+	bic	r9, r9, #AT91_SFRBU_25LDOCR_LP
+lp_done_\ena:
+	ldr	r10, =AT91_SFRBU_25LDOCR_LDOANAKEY
+	orr	r9, r9, r10
+	str	r9, [r7, #AT91_SFRBU_25LDOCR]
+#endif
+	.endm
+
+	.macro at91_backup_set_lpm reg
+#ifdef CONFIG_SOC_SAMA7
+	orr	\reg, \reg, #0x200000
+#endif
+	.endm
+
+	.text
+
+	.arm
+
+#ifdef CONFIG_SOC_SAMA7
+/**
+ * Enable self-refresh
+ *
+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3, r7
+ */
+.macro at91_sramc_self_refresh_ena
+	ldr	r2, .sramc_base
+	ldr	r3, .sramc_phy_base
+	ldr	r7, .pm_mode
+
+	dsb
+
+	/* Disable all AXI ports. */
+	ldr	tmp1, [r2, #UDDRC_PCTRL_0]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_0]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_1]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_1]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_2]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_2]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_3]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_3]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_4]
+	bic	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_4]
+
+sr_ena_1:
+	/* Wait for all ports to disable. */
+	ldr	tmp1, [r2, #UDDRC_PSTAT]
+	ldr	tmp2, =UDDRC_PSTAT_ALL_PORTS
+	tst	tmp1, tmp2
+	bne	sr_ena_1
+
+	/* Switch to self-refresh. */
+	ldr	tmp1, [r2, #UDDRC_PWRCTL]
+	orr	tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW
+	str	tmp1, [r2, #UDDRC_PWRCTL]
+
+sr_ena_2:
+	/* Wait for self-refresh enter. */
+	ldr	tmp1, [r2, #UDDRC_STAT]
+	bic	tmp1, tmp1, #~UDDRC_STAT_SELFREF_TYPE_MSK
+	cmp	tmp1, #UDDRC_STAT_SELFREF_TYPE_SW
+	bne	sr_ena_2
+
+	/* Disable DX DLLs for non-backup modes. */
+	cmp	r7, #AT91_PM_BACKUP
+	beq	sr_ena_3
+
+	/* Do not soft reset the AC DLL. */
+	ldr	tmp1, [r3, DDR3PHY_ACDLLCR]
+	bic	tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST
+	str	tmp1, [r3, DDR3PHY_ACDLLCR]
+
+	/* Disable DX DLLs. */
+	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+	ldr	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+
+sr_ena_3:
+	/* Power down DDR PHY data receivers. */
+	ldr	tmp1, [r3, #DDR3PHY_DXCCR]
+	orr	tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
+	str	tmp1, [r3, #DDR3PHY_DXCCR]
+
+	/* Power down ADDR/CMD IO. */
+	ldr	tmp1, [r3, #DDR3PHY_ACIOCR]
+	orr	tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
+	orr	tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
+	orr	tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
+	str	tmp1, [r3, #DDR3PHY_ACIOCR]
+
+	/* Power down ODT. */
+	ldr	tmp1, [r3, #DDR3PHY_DSGCR]
+	orr	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
+	str	tmp1, [r3, #DDR3PHY_DSGCR]
+.endm
+
+/**
+ * Disable self-refresh
+ *
+ * Side effects: overwrites r2, r3, tmp1, tmp2, tmp3
+ */
+.macro at91_sramc_self_refresh_dis
+	ldr	r2, .sramc_base
+	ldr	r3, .sramc_phy_base
+
+	/* Power up DDR PHY data receivers. */
+	ldr	tmp1, [r3, #DDR3PHY_DXCCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXCCR_DXPDR
+	str	tmp1, [r3, #DDR3PHY_DXCCR]
+
+	/* Power up the output of CK and CS pins. */
+	ldr	tmp1, [r3, #DDR3PHY_ACIOCR]
+	bic	tmp1, tmp1, #DDR3PHY_ACIORC_ACPDD
+	bic	tmp1, tmp1, #DDR3PHY_ACIOCR_CKPDD_CK0
+	bic	tmp1, tmp1, #DDR3PHY_ACIOCR_CSPDD_CS0
+	str	tmp1, [r3, #DDR3PHY_ACIOCR]
+
+	/* Power up ODT. */
+	ldr	tmp1, [r3, #DDR3PHY_DSGCR]
+	bic	tmp1, tmp1, #DDR3PHY_DSGCR_ODTPDD_ODT0
+	str	tmp1, [r3, #DDR3PHY_DSGCR]
+
+	/* Enable DX DLLs. */
+	ldr	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX0DLLCR]
+
+	ldr	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+	bic	tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS
+	str	tmp1, [r3, #DDR3PHY_DX1DLLCR]
+
+	/* Enable quasi-dynamic programming. */
+	mov	tmp1, #0
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+	/* De-assert SDRAM initialization. */
+	ldr	tmp1, [r2, #UDDRC_DFIMISC]
+	bic	tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
+	str	tmp1, [r2, #UDDRC_DFIMISC]
+
+	/* Quasi-dynamic programming done. */
+	mov	tmp1, #UDDRC_SWCTRL_SW_DONE
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+sr_dis_1:
+	ldr	tmp1, [r2, #UDDRC_SWSTAT]
+	tst	tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
+	beq	sr_dis_1
+
+	/* DLL soft-reset + DLL lock wait + ITM reset */
+	mov	tmp1, #(DDR3PHY_PIR_INIT | DDR3PHY_PIR_DLLSRST | \
+			DDR3PHY_PIR_DLLLOCK | DDR3PHY_PIR_ITMSRST)
+	str	tmp1, [r3, #DDR3PHY_PIR]
+
+sr_dis_4:
+	/* Wait for it. */
+	ldr	tmp1, [r3, #DDR3PHY_PGSR]
+	tst	tmp1, #DDR3PHY_PGSR_IDONE
+	beq	sr_dis_4
+
+	/* Enable quasi-dynamic programming. */
+	mov	tmp1, #0
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+	/* Assert PHY init complete enable signal. */
+	ldr	tmp1, [r2, #UDDRC_DFIMISC]
+	orr	tmp1, tmp1, #UDDRC_DFIMISC_DFI_INIT_COMPLETE_EN
+	str	tmp1, [r2, #UDDRC_DFIMISC]
+
+	/* Programming is done. Set sw_done. */
+	mov	tmp1, #UDDRC_SWCTRL_SW_DONE
+	str	tmp1, [r2, #UDDRC_SWCTRL]
+
+sr_dis_5:
+	/* Wait for it. */
+	ldr	tmp1, [r2, #UDDRC_SWSTAT]
+	tst	tmp1, #UDDRC_SWSTAT_SW_DONE_ACK
+	beq	sr_dis_5
+
+	/* Trigger self-refresh exit. */
+	ldr	tmp1, [r2, #UDDRC_PWRCTL]
+	bic	tmp1, tmp1, #UDDRC_PWRCTL_SELFREF_SW
+	str	tmp1, [r2, #UDDRC_PWRCTL]
+
+sr_dis_6:
+	/* Wait for self-refresh exit done. */
+	ldr	tmp1, [r2, #UDDRC_STAT]
+	bic	tmp1, tmp1, #~UDDRC_STAT_OPMODE_MSK
+	cmp	tmp1, #UDDRC_STAT_OPMODE_NORMAL
+	bne	sr_dis_6
+
+	/* Enable all AXI ports. */
+	ldr	tmp1, [r2, #UDDRC_PCTRL_0]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_0]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_1]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_1]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_2]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_2]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_3]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_3]
+
+	ldr	tmp1, [r2, #UDDRC_PCTRL_4]
+	orr	tmp1, tmp1, #0x1
+	str	tmp1, [r2, #UDDRC_PCTRL_4]
+
+	dsb
+.endm
+#else
+/**
+ * Enable self-refresh
+ *
+ * register usage:
+ * 	@r1: memory type
+ *	@r2: base address of the sram controller
+ *	@r3: temporary
+ */
+.macro at91_sramc_self_refresh_ena
+	ldr	r1, .memtype
+	ldr	r2, .sramc_base
+
+	cmp	r1, #AT91_MEMCTRL_MC
+	bne	sr_ena_ddrc_sf
+
+	/* Active SDRAM self-refresh mode */
+	mov	r3, #1
+	str	r3, [r2, #AT91_MC_SDRAMC_SRR]
+	b	sr_ena_exit
+
+sr_ena_ddrc_sf:
+	cmp	r1, #AT91_MEMCTRL_DDRSDR
+	bne	sr_ena_sdramc_sf
+
+	/*
+	 * DDR Memory controller
+	 */
+
+	/* LPDDR1 --> force DDR2 mode during self-refresh */
+	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
+	str	r3, .saved_sam9_mdr
+	bic	r3, r3, #~AT91_DDRSDRC_MD
+	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
+	biceq	r3, r3, #AT91_DDRSDRC_MD
+	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
+	streq	r3, [r2, #AT91_DDRSDRC_MDR]
+
+	/* Active DDRC self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
+	str	r3, .saved_sam9_lpr
+	bic	r3, r3, #AT91_DDRSDRC_LPCB
+	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+
+	/* If using the 2nd ddr controller */
+	ldr	r2, .sramc1_base
+	cmp	r2, #0
+	beq	sr_ena_no_2nd_ddrc
+
+	ldr	r3, [r2, #AT91_DDRSDRC_MDR]
+	str	r3, .saved_sam9_mdr1
+	bic	r3, r3, #~AT91_DDRSDRC_MD
+	cmp	r3, #AT91_DDRSDRC_MD_LOW_POWER_DDR
+	ldreq	r3, [r2, #AT91_DDRSDRC_MDR]
+	biceq	r3, r3, #AT91_DDRSDRC_MD
+	orreq	r3, r3, #AT91_DDRSDRC_MD_DDR2
+	streq	r3, [r2, #AT91_DDRSDRC_MDR]
+
+	/* Active DDRC self-refresh mode */
+	ldr	r3, [r2, #AT91_DDRSDRC_LPR]
+	str	r3, .saved_sam9_lpr1
+	bic	r3, r3, #AT91_DDRSDRC_LPCB
+	orr	r3, r3, #AT91_DDRSDRC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+
+sr_ena_no_2nd_ddrc:
+	b	sr_ena_exit
+
+	/*
+	 * SDRAMC Memory controller
+	 */
+sr_ena_sdramc_sf:
+	/* Active SDRAMC self-refresh mode */
+	ldr	r3, [r2, #AT91_SDRAMC_LPR]
+	str	r3, .saved_sam9_lpr
+	bic	r3, r3, #AT91_SDRAMC_LPCB
+	orr	r3, r3, #AT91_SDRAMC_LPCB_SELF_REFRESH
+	str	r3, [r2, #AT91_SDRAMC_LPR]
+
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_SDRAMC_LPR]
+
+sr_ena_exit:
+.endm
+
+/**
+ * Disable self-refresh
+ *
+ * register usage:
+ * 	@r1: memory type
+ *	@r2: base address of the sram controller
+ *	@r3: temporary
+ */
+.macro at91_sramc_self_refresh_dis
+	ldr	r1, .memtype
+	ldr	r2, .sramc_base
+
+	cmp	r1, #AT91_MEMCTRL_MC
+	bne	sr_dis_ddrc_exit_sf
+
+	/*
+	 * at91rm9200 Memory controller
+	 */
+
+	 /*
+	  * For exiting the self-refresh mode, do nothing,
+	  * automatically exit the self-refresh mode.
+	  */
+	b	sr_dis_exit
+
+sr_dis_ddrc_exit_sf:
+	cmp	r1, #AT91_MEMCTRL_DDRSDR
+	bne	sdramc_exit_sf
+
+	/* DDR Memory controller */
+
+	/* Restore MDR in case of LPDDR1 */
+	ldr	r3, .saved_sam9_mdr
+	str	r3, [r2, #AT91_DDRSDRC_MDR]
+	/* Restore LPR on AT91 with DDRAM */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_DDRSDRC_LPR]
+
+	/* If using the 2nd ddr controller */
+	ldr	r2, .sramc1_base
+	cmp	r2, #0
+	ldrne	r3, .saved_sam9_mdr1
+	strne	r3, [r2, #AT91_DDRSDRC_MDR]
+	ldrne	r3, .saved_sam9_lpr1
+	strne	r3, [r2, #AT91_DDRSDRC_LPR]
+
+	b	sr_dis_exit
+
+sdramc_exit_sf:
+	/* SDRAMC Memory controller */
+	ldr	r3, .saved_sam9_lpr
+	str	r3, [r2, #AT91_SDRAMC_LPR]
+
+sr_dis_exit:
+.endm
+#endif
+
+.macro at91_pm_ulp0_mode
+	ldr	pmc, .pmc_base
+	ldr	tmp2, .pm_mode
+	ldr	tmp3, .mckr_offset
+
+	/* Check if ULP0 fast variant has been requested. */
+	cmp	tmp2, #AT91_PM_ULP0_FAST
+	bne	0f
+
+	/* Set highest prescaler for power saving */
+	ldr	tmp1, [pmc, tmp3]
+	bic	tmp1, tmp1, #AT91_PMC_PRES
+	orr	tmp1, tmp1, #AT91_PMC_PRES_64
+	str	tmp1, [pmc, tmp3]
+
+	mov	tmp3, #0
+	wait_mckrdy tmp3
+	b	1f
+
+0:
+	/* Turn off the crystal oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Save RC oscillator state */
+	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	str	tmp1, .saved_osc_status
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	bne	1f
+
+	/* Turn off RC oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCRCEN
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Wait main RC disabled done */
+2:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	bne	2b
+
+	/* Wait for interrupt */
+1:	at91_cpu_idle
+
+	/* Check if ULP0 fast variant has been requested. */
+	cmp	tmp2, #AT91_PM_ULP0_FAST
+	bne	5f
+
+	/* Set lowest prescaler for fast resume. */
+	ldr	tmp3, .mckr_offset
+	ldr	tmp1, [pmc, tmp3]
+	bic	tmp1, tmp1, #AT91_PMC_PRES
+	str	tmp1, [pmc, tmp3]
+
+	mov	tmp3, #0
+	wait_mckrdy tmp3
+	b	6f
+
+5:	/* Restore RC oscillator state */
+	ldr	tmp1, .saved_osc_status
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	beq	4f
+
+	/* Turn on RC oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCRCEN
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Wait main RC stabilization */
+3:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	beq	3b
+
+	/* Turn on the crystal oscillator */
+4:	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_moscrdy
+6:
+.endm
+
+/**
+ * Note: This procedure only applies on the platform which uses
+ * the external crystal oscillator as a main clock source.
+ */
+.macro at91_pm_ulp1_mode
+	ldr	pmc, .pmc_base
+	ldr	tmp2, .mckr_offset
+	mov	tmp3, #0
+
+	/* Save RC oscillator state and check if it is enabled. */
+	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	str	tmp1, .saved_osc_status
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	bne	2f
+
+	/* Enable RC oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCRCEN
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Wait main RC stabilization */
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	beq	1b
+
+	/* Switch the main clock source to 12-MHz RC oscillator */
+2:	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCSEL
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_moscsels
+
+	/* Disable the crystal oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCEN
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Switch the master clock source to main clock */
+	ldr	tmp1, [pmc, tmp2]
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
+	str	tmp1, [pmc, tmp2]
+
+	wait_mckrdy tmp3
+
+	/* Enter the ULP1 mode by set WAITMODE bit in CKGR_MOR */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_WAITMODE
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Quirk for SAM9X60's PMC */
+	nop
+	nop
+
+	wait_mckrdy tmp3
+
+	/* Enable the crystal oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCEN
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_moscrdy
+
+	/* Switch the master clock source to slow clock */
+	ldr	tmp1, [pmc, tmp2]
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	str	tmp1, [pmc, tmp2]
+
+	wait_mckrdy tmp3
+
+	/* Switch main clock source to crystal oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	orr	tmp1, tmp1, #AT91_PMC_MOSCSEL
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	wait_moscsels
+
+	/* Switch the master clock source to main clock */
+	ldr	tmp1, [pmc, tmp2]
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
+	str	tmp1, [pmc, tmp2]
+
+	wait_mckrdy tmp3
+
+	/* Restore RC oscillator state */
+	ldr	tmp1, .saved_osc_status
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	bne	3f
+
+	/* Disable RC oscillator */
+	ldr	tmp1, [pmc, #AT91_CKGR_MOR]
+	bic	tmp1, tmp1, #AT91_PMC_MOSCRCEN
+	bic	tmp1, tmp1, #AT91_PMC_KEY_MASK
+	orr	tmp1, tmp1, #AT91_PMC_KEY
+	str	tmp1, [pmc, #AT91_CKGR_MOR]
+
+	/* Wait RC oscillator disable done */
+4:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_MOSCRCS
+	bne	4b
+
+3:
+.endm
+
+.macro at91_plla_disable
+	/* Save PLLA setting and disable it */
+	ldr	tmp1, .pmc_version
+	cmp	tmp1, #AT91_PMC_V1
+	beq	1f
+
+#ifdef CONFIG_HAVE_AT91_SAM9X60_PLL
+	/* Save PLLA settings. */
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
+	str	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* save div. */
+	mov	tmp1, #0
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_CTRL0]
+	bic	tmp2, tmp2, #0xffffff00
+	orr	tmp1, tmp1, tmp2
+
+	/* save mul. */
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_CTRL1]
+	bic	tmp2, tmp2, #0xffffff
+	orr	tmp1, tmp1, tmp2
+	str	tmp1, .saved_pllar
+
+	/* step 2. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 3. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+	/* step 4. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 5. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+	/* step 7. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	b	2f
+#endif
+
+1:	/* Save PLLA setting and disable it */
+	ldr	tmp1, [pmc, #AT91_CKGR_PLLAR]
+	str	tmp1, .saved_pllar
+
+	/* Disable PLLA. */
+	mov	tmp1, #AT91_PMC_PLLCOUNT
+	orr	tmp1, tmp1, #(1 << 29)		/* bit 29 always set */
+	str	tmp1, [pmc, #AT91_CKGR_PLLAR]
+2:
+.endm
+
+.macro at91_plla_enable
+	ldr	tmp2, .saved_pllar
+	ldr	tmp3, .pmc_version
+	cmp	tmp3, #AT91_PMC_V1
+	beq	4f
+
+#ifdef CONFIG_HAVE_AT91_SAM9X60_PLL
+	/* step 1. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 2. */
+	ldr	tmp1, =AT91_PMC_PLL_ACR_DEFAULT_PLLA
+	str	tmp1, [pmc, #AT91_PMC_PLL_ACR]
+
+	/* step 3. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL1]
+	mov	tmp3, tmp2
+	bic	tmp3, tmp3, #0xffffff
+	orr	tmp1, tmp1, tmp3
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL1]
+
+	/* step 8. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 9. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENLOCK
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLL
+	orr	tmp1, tmp1, #AT91_PMC_PLL_CTRL0_ENPLLCK
+	bic	tmp1, tmp1, #0xff
+	mov	tmp3, tmp2
+	bic	tmp3, tmp3, #0xffffff00
+	orr	tmp1, tmp1, tmp3
+	str	tmp1, [pmc, #AT91_PMC_PLL_CTRL0]
+
+	/* step 10. */
+	ldr	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+	orr	tmp1, tmp1, #AT91_PMC_PLL_UPDT_UPDATE
+	bic	tmp1, tmp1, #AT91_PMC_PLL_UPDT_ID
+	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
+
+	/* step 11. */
+3:	ldr	tmp1, [pmc, #AT91_PMC_PLL_ISR0]
+	tst	tmp1, #0x1
+	beq	3b
+	b	2f
+#endif
+
+	/* Restore PLLA setting */
+4:	str	tmp2, [pmc, #AT91_CKGR_PLLAR]
+
+	/* Enable PLLA. */
+	tst	tmp2, #(AT91_PMC_MUL &  0xff0000)
+	bne	1f
+	tst	tmp2, #(AT91_PMC_MUL & ~0xff0000)
+	beq	2f
+
+1:	ldr	tmp1, [pmc, #AT91_PMC_SR]
+	tst	tmp1, #AT91_PMC_LOCKA
+	beq	1b
+2:
+.endm
+
+/**
+ * at91_mckx_ps_enable:	save MCK1..4 settings and switch it to main clock
+ *
+ * Side effects: overwrites tmp1, tmp2
+ */
+.macro at91_mckx_ps_enable
+#ifdef CONFIG_SOC_SAMA7
+	ldr	pmc, .pmc_base
+
+	/* There are 4 MCKs we need to handle: MCK1..4 */
+	mov	tmp1, #1
+e_loop:	cmp	tmp1, #5
+	beq	e_done
+
+	/* Write MCK ID to retrieve the settings. */
+	str	tmp1, [pmc, #AT91_PMC_MCR_V2]
+	ldr	tmp2, [pmc, #AT91_PMC_MCR_V2]
+
+e_save_mck1:
+	cmp	tmp1, #1
+	bne	e_save_mck2
+	str	tmp2, .saved_mck1
+	b	e_ps
+
+e_save_mck2:
+	cmp	tmp1, #2
+	bne	e_save_mck3
+	str	tmp2, .saved_mck2
+	b	e_ps
+
+e_save_mck3:
+	cmp	tmp1, #3
+	bne	e_save_mck4
+	str	tmp2, .saved_mck3
+	b	e_ps
+
+e_save_mck4:
+	str	tmp2, .saved_mck4
+
+e_ps:
+	/* Use CSS=MAINCK and DIV=1. */
+	bic	tmp2, tmp2, #AT91_PMC_MCR_V2_CSS
+	bic	tmp2, tmp2, #AT91_PMC_MCR_V2_DIV
+	orr	tmp2, tmp2, #AT91_PMC_MCR_V2_CSS_MAINCK
+	orr	tmp2, tmp2, #AT91_PMC_MCR_V2_DIV1
+	str	tmp2, [pmc, #AT91_PMC_MCR_V2]
+
+	wait_mckrdy tmp1
+
+	add	tmp1, tmp1, #1
+	b	e_loop
+
+e_done:
+#endif
+.endm
+
+/**
+ * at91_mckx_ps_restore: restore MCK1..4 settings
+ *
+ * Side effects: overwrites tmp1, tmp2
+ */
+.macro at91_mckx_ps_restore
+#ifdef CONFIG_SOC_SAMA7
+	ldr	pmc, .pmc_base
+
+	/* There are 4 MCKs we need to handle: MCK1..4 */
+	mov	tmp1, #1
+r_loop:	cmp	tmp1, #5
+	beq	r_done
+
+r_save_mck1:
+	cmp	tmp1, #1
+	bne	r_save_mck2
+	ldr	tmp2, .saved_mck1
+	b	r_ps
+
+r_save_mck2:
+	cmp	tmp1, #2
+	bne	r_save_mck3
+	ldr	tmp2, .saved_mck2
+	b	r_ps
+
+r_save_mck3:
+	cmp	tmp1, #3
+	bne	r_save_mck4
+	ldr	tmp2, .saved_mck3
+	b	r_ps
+
+r_save_mck4:
+	ldr	tmp2, .saved_mck4
+
+r_ps:
+	/* Write MCK ID to retrieve the settings. */
+	str	tmp1, [pmc, #AT91_PMC_MCR_V2]
+	ldr	tmp3, [pmc, #AT91_PMC_MCR_V2]
+
+	/* We need to restore CSS and DIV. */
+	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_CSS
+	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_DIV
+	orr	tmp3, tmp3, tmp2
+	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK
+	orr	tmp3, tmp3, tmp1
+	orr	tmp3, tmp3, #AT91_PMC_MCR_V2_CMD
+	str	tmp2, [pmc, #AT91_PMC_MCR_V2]
+
+	wait_mckrdy tmp1
+
+	add	tmp1, tmp1, #1
+	b	r_loop
+r_done:
+#endif
+.endm
+
+.macro at91_ulp_mode
+	at91_mckx_ps_enable
+
+	ldr	pmc, .pmc_base
+	ldr	tmp2, .mckr_offset
+	ldr	tmp3, .pm_mode
+
+	/* Save Master clock setting */
+	ldr	tmp1, [pmc, tmp2]
+	str	tmp1, .saved_mckr
+
+	/*
+	 * Set master clock source to:
+	 * - MAINCK if using ULP0 fast variant
+	 * - slow clock, otherwise
+	 */
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	cmp	tmp3, #AT91_PM_ULP0_FAST
+	bne	save_mck
+	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
+save_mck:
+	str	tmp1, [pmc, tmp2]
+
+	mov	tmp3, #0
+	wait_mckrdy tmp3
+
+	at91_plla_disable
+
+	/* Enable low power mode for 2.5V regulator. */
+	at91_2_5V_reg_set_low_power 1
+
+	ldr	tmp3, .pm_mode
+	cmp	tmp3, #AT91_PM_ULP1
+	beq	ulp1_mode
+
+	at91_pm_ulp0_mode
+	b	ulp_exit
+
+ulp1_mode:
+	at91_pm_ulp1_mode
+	b	ulp_exit
+
+ulp_exit:
+	/* Disable low power mode for 2.5V regulator. */
+	at91_2_5V_reg_set_low_power 0
+
+	ldr	pmc, .pmc_base
+
+	at91_plla_enable
+
+	/*
+	 * Restore master clock setting
+	 */
+	ldr	tmp1, .mckr_offset
+	ldr	tmp2, .saved_mckr
+	str	tmp2, [pmc, tmp1]
+
+	mov	tmp3, #0
+	wait_mckrdy tmp3
+
+	at91_mckx_ps_restore
+.endm
+
+.macro at91_backup_mode
+	/* Switch the master clock source to slow clock. */
+	ldr	pmc, .pmc_base
+	ldr	tmp2, .mckr_offset
+	ldr	tmp1, [pmc, tmp2]
+	bic	tmp1, tmp1, #AT91_PMC_CSS
+	str	tmp1, [pmc, tmp2]
+
+	mov	tmp3, #0
+	wait_mckrdy tmp3
+
+	/*BUMEN*/
+	ldr	r0, .sfrbu
+	mov	tmp1, #0x1
+	str	tmp1, [r0, #0x10]
+
+	/* Wait for it. */
+1:	ldr	tmp1, [r0, #0x10]
+	tst	tmp1, #0x1
+	beq	1b
+
+	/* Shutdown */
+	ldr	r0, .shdwc
+	mov	tmp1, #0xA5000000
+	add	tmp1, tmp1, #0x1
+	at91_backup_set_lpm tmp1
+	str	tmp1, [r0, #0]
+.endm
+
+/*
+ * void at91_suspend_sram_fn(struct at91_pm_data*)
+ * @input param:
+ * 	@r0: base address of struct at91_pm_data
+ */
+/* at91_pm_suspend_in_sram must be 8-byte aligned per the requirements of fncpy() */
+	.align 3
+ENTRY(at91_pm_suspend_in_sram)
+	/* Save registers on stack */
+	stmfd	sp!, {r4 - r12, lr}
+
+	/* Drain write buffer */
+	mov	tmp1, #0
+	mcr	p15, 0, tmp1, c7, c10, 4
+
+	/* Flush tlb. */
+	mov	r4, #0
+	mcr	p15, 0, r4, c8, c7, 0
+
+	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+	str	tmp1, .mckr_offset
+	ldr	tmp1, [r0, #PM_DATA_PMC_VERSION]
+	str	tmp1, .pmc_version
+	ldr	tmp1, [r0, #PM_DATA_MEMCTRL]
+	str	tmp1, .memtype
+	ldr	tmp1, [r0, #PM_DATA_MODE]
+	str	tmp1, .pm_mode
+
+	/*
+	 * ldrne below are here to preload their address in the TLB as access
+	 * to RAM may be limited while in self-refresh.
+	 */
+	ldr	tmp1, [r0, #PM_DATA_PMC]
+	str	tmp1, .pmc_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
+	ldr	tmp1, [r0, #PM_DATA_RAMC0]
+	str	tmp1, .sramc_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
+	ldr	tmp1, [r0, #PM_DATA_RAMC1]
+	str	tmp1, .sramc1_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
+#ifndef CONFIG_SOC_SAM_V4_V5
+	/* ldrne below are here to preload their address in the TLB */
+	ldr	tmp1, [r0, #PM_DATA_RAMC_PHY]
+	str	tmp1, .sramc_phy_base
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
+	ldr	tmp1, [r0, #PM_DATA_SHDWC]
+	str	tmp1, .shdwc
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0]
+
+	ldr	tmp1, [r0, #PM_DATA_SFRBU]
+	str	tmp1, .sfrbu
+	cmp	tmp1, #0
+	ldrne	tmp2, [tmp1, #0x10]
+#endif
+
+	/* Active the self-refresh mode */
+	at91_sramc_self_refresh_ena
+
+	ldr	r0, .pm_mode
+	cmp	r0, #AT91_PM_STANDBY
+	beq	standby
+	cmp	r0, #AT91_PM_BACKUP
+	beq	backup_mode
+
+	at91_ulp_mode
+	b	exit_suspend
+
+standby:
+	/* Wait for interrupt */
+	ldr	pmc, .pmc_base
+	at91_cpu_idle
+	b	exit_suspend
+
+backup_mode:
+	at91_backup_mode
+
+exit_suspend:
+	/* Exit the self-refresh mode */
+	at91_sramc_self_refresh_dis
+
+	/* Restore registers, and return */
+	ldmfd	sp!, {r4 - r12, pc}
+ENDPROC(at91_pm_suspend_in_sram)
+
+.pmc_base:
+	.word 0
+.sramc_base:
+	.word 0
+.sramc1_base:
+	.word 0
+.sramc_phy_base:
+	.word 0
+.shdwc:
+	.word 0
+.sfrbu:
+	.word 0
+.memtype:
+	.word 0
+.pm_mode:
+	.word 0
+.mckr_offset:
+	.word 0
+.pmc_version:
+	.word 0
+.saved_mckr:
+	.word 0
+.saved_pllar:
+	.word 0
+.saved_sam9_lpr:
+	.word 0
+.saved_sam9_lpr1:
+	.word 0
+.saved_sam9_mdr:
+	.word 0
+.saved_sam9_mdr1:
+	.word 0
+.saved_osc_status:
+	.word 0
+#ifdef CONFIG_SOC_SAMA7
+.saved_mck1:
+	.word 0
+.saved_mck2:
+	.word 0
+.saved_mck3:
+	.word 0
+.saved_mck4:
+	.word 0
+#endif
+
+ENTRY(at91_pm_suspend_in_sram_sz)
+	.word .-at91_pm_suspend_in_sram
diff --git a/arch/arm/mach-at91/sam9x60.c b/arch/arm/mach-at91/sam9x60.c
new file mode 100644
index 000000000..d8c739d25
--- /dev/null
+++ b/arch/arm/mach-at91/sam9x60.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Setup code for SAM9X60.
+ *
+ * Copyright (C) 2019 Microchip Technology Inc. and its subsidiaries
+ *
+ * Author: Claudiu Beznea <claudiu.beznea@microchip.com>
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/system_misc.h>
+
+#include "generic.h"
+
+static void __init sam9x60_init(void)
+{
+	of_platform_default_populate(NULL, NULL, NULL);
+
+	sam9x60_pm_init();
+}
+
+static const char *const sam9x60_dt_board_compat[] __initconst = {
+	"microchip,sam9x60",
+	NULL
+};
+
+DT_MACHINE_START(sam9x60_dt, "Microchip SAM9X60")
+	/* Maintainer: Microchip */
+	.init_machine	= sam9x60_init,
+	.dt_compat	= sam9x60_dt_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-at91/sam_secure.c b/arch/arm/mach-at91/sam_secure.c
new file mode 100644
index 000000000..f7789cbe2
--- /dev/null
+++ b/arch/arm/mach-at91/sam_secure.c
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2022, Microchip
+ */
+
+#include <linux/arm-smccc.h>
+#include <linux/of.h>
+
+#include "sam_secure.h"
+
+static bool optee_available;
+
+#define SAM_SIP_SMC_STD_CALL_VAL(func_num) \
+	ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_32, \
+	ARM_SMCCC_OWNER_SIP, (func_num))
+
+struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1)
+{
+	struct arm_smccc_res res = {.a0 = -1};
+
+	if (WARN_ON(!optee_available))
+		return res;
+
+	arm_smccc_smc(SAM_SIP_SMC_STD_CALL_VAL(fn), arg0, arg1, 0, 0, 0, 0, 0,
+		      &res);
+
+	return res;
+}
+
+bool sam_linux_is_optee_available(void)
+{
+	/* If optee has been detected, then we are running in normal world */
+	return optee_available;
+}
+
+void __init sam_secure_init(void)
+{
+	struct device_node *np;
+
+	/*
+	 * We only check that the OP-TEE node is present and available. The
+	 * OP-TEE kernel driver is not needed for the type of interaction made
+	 * with OP-TEE here so the driver's status is not checked.
+	 */
+	np = of_find_node_by_path("/firmware/optee");
+	if (np && of_device_is_available(np))
+		optee_available = true;
+	of_node_put(np);
+
+	if (optee_available)
+		pr_info("Running under OP-TEE firmware\n");
+}
diff --git a/arch/arm/mach-at91/sam_secure.h b/arch/arm/mach-at91/sam_secure.h
new file mode 100644
index 000000000..1a0b5ebbf
--- /dev/null
+++ b/arch/arm/mach-at91/sam_secure.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2022, Microchip
+ */
+
+#ifndef SAM_SECURE_H
+#define SAM_SECURE_H
+
+#include <linux/arm-smccc.h>
+
+/* Secure Monitor mode APIs */
+#define SAMA5_SMC_SIP_SET_SUSPEND_MODE	0x400
+#define SAMA5_SMC_SIP_GET_SUSPEND_MODE	0x401
+
+void __init sam_secure_init(void);
+struct arm_smccc_res sam_smccc_call(u32 fn, u32 arg0, u32 arg1);
+bool sam_linux_is_optee_available(void);
+
+#endif /* SAM_SECURE_H */
diff --git a/arch/arm/mach-at91/sama5.c b/arch/arm/mach-at91/sama5.c
new file mode 100644
index 000000000..bf2b5c6a1
--- /dev/null
+++ b/arch/arm/mach-at91/sama5.c
@@ -0,0 +1,79 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Setup code for SAMA5
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2013 Ludovic Desroches <ludovic.desroches@atmel.com>
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/outercache.h>
+#include <asm/system_misc.h>
+
+#include "generic.h"
+#include "sam_secure.h"
+
+static void sama5_l2c310_write_sec(unsigned long val, unsigned reg)
+{
+	/* OP-TEE configures the L2 cache and does not allow modifying it yet */
+}
+
+static void __init sama5_secure_cache_init(void)
+{
+	sam_secure_init();
+	if (IS_ENABLED(CONFIG_OUTER_CACHE) && sam_linux_is_optee_available())
+		outer_cache.write_sec = sama5_l2c310_write_sec;
+}
+
+static void __init sama5_dt_device_init(void)
+{
+	of_platform_default_populate(NULL, NULL, NULL);
+	sama5_pm_init();
+}
+
+static const char *const sama5_dt_board_compat[] __initconst = {
+	"atmel,sama5",
+	NULL
+};
+
+DT_MACHINE_START(sama5_dt, "Atmel SAMA5")
+	/* Maintainer: Atmel */
+	.init_machine	= sama5_dt_device_init,
+	.dt_compat	= sama5_dt_board_compat,
+MACHINE_END
+
+static const char *const sama5_alt_dt_board_compat[] __initconst = {
+	"atmel,sama5d4",
+	NULL
+};
+
+DT_MACHINE_START(sama5_alt_dt, "Atmel SAMA5")
+	/* Maintainer: Atmel */
+	.init_machine	= sama5_dt_device_init,
+	.dt_compat	= sama5_alt_dt_board_compat,
+	.l2c_aux_mask	= ~0UL,
+MACHINE_END
+
+static void __init sama5d2_init(void)
+{
+	of_platform_default_populate(NULL, NULL, NULL);
+	sama5d2_pm_init();
+}
+
+static const char *const sama5d2_compat[] __initconst = {
+	"atmel,sama5d2",
+	NULL
+};
+
+DT_MACHINE_START(sama5d2, "Atmel SAMA5")
+	/* Maintainer: Atmel */
+	.init_machine	= sama5d2_init,
+	.init_early	= sama5_secure_cache_init,
+	.dt_compat	= sama5d2_compat,
+	.l2c_aux_mask	= ~0UL,
+MACHINE_END
diff --git a/arch/arm/mach-at91/sama7.c b/arch/arm/mach-at91/sama7.c
new file mode 100644
index 000000000..bd43733ed
--- /dev/null
+++ b/arch/arm/mach-at91/sama7.c
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Setup code for SAMA7
+ *
+ * Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
+ *
+ */
+
+#include <linux/of.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/system_misc.h>
+
+#include "generic.h"
+
+static void __init sama7_dt_device_init(void)
+{
+	of_platform_default_populate(NULL, NULL, NULL);
+	sama7_pm_init();
+}
+
+static const char *const sama7_dt_board_compat[] __initconst = {
+	"microchip,sama7",
+	NULL
+};
+
+DT_MACHINE_START(sama7_dt, "Microchip SAMA7")
+	/* Maintainer: Microchip */
+	.init_machine	= sama7_dt_device_init,
+	.dt_compat	= sama7_dt_board_compat,
+MACHINE_END
+
diff --git a/arch/arm/mach-at91/samv7.c b/arch/arm/mach-at91/samv7.c
new file mode 100644
index 000000000..28f998f0f
--- /dev/null
+++ b/arch/arm/mach-at91/samv7.c
@@ -0,0 +1,24 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Setup code for SAMv7x
+ *
+ *  Copyright (C) 2013 Atmel,
+ *                2016 Andras Szemzo <szemzo.andras@gmail.com>
+ */
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/system_misc.h>
+#include "generic.h"
+
+static const char *const samv7_dt_board_compat[] __initconst = {
+	"atmel,samv7",
+	NULL
+};
+
+DT_MACHINE_START(samv7_dt, "Atmel SAMV7")
+	.dt_compat	= samv7_dt_board_compat,
+MACHINE_END