Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 59 insertions, 0 deletions

diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
new file mode 100644
index 000000000..0615cb0ba
--- /dev/null
+++ b/arch/arm/mach-omap1/Makefile
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the linux kernel.
+#
+
+# Common support
+obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
+	 serial.o devices.o dma.o omap-dma.o fb.o
+obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
+
+ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),)
+obj-y += mcbsp.o
+endif
+
+obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
+
+# OCPI interconnect support for 1710, 1610 and 5912
+obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
+
+# Power Management
+obj-$(CONFIG_PM) += pm.o sleep.o
+
+i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
+obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
+
+led-y := leds.o
+
+usb-fs-$(CONFIG_USB_SUPPORT)		:= usb.o
+obj-y					+= $(usb-fs-m) $(usb-fs-y)
+
+# Specific board support
+obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o \
+					   board-nand.o
+obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
+obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
+obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o board-nand.o
+obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
+obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
+obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
+					   board-nand.o
+obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
+obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
+obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
+obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
+obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o ams-delta-fiq.o \
+					   ams-delta-fiq-handler.o
+obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
+obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
+
+ifeq ($(CONFIG_ARCH_OMAP15XX),y)
+# Innovator-1510 FPGA
+obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
+endif
+
+# GPIO
+obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
+obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
+obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
+obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o