Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

34 files changed, 7571 insertions, 0 deletions

diff --git a/arch/arm/mach-orion5x/Kconfig b/arch/arm/mach-orion5x/Kconfig
new file mode 100644
index 000000000..0044b2823
--- /dev/null
+++ b/arch/arm/mach-orion5x/Kconfig
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menuconfig ARCH_ORION5X
+	bool "Marvell Orion"
+	depends on ARCH_MULTI_V5
+	depends on CPU_LITTLE_ENDIAN
+	select CPU_FEROCEON
+	select GPIOLIB
+	select MVEBU_MBUS
+	select FORCE_PCI
+	select PCI_QUIRKS
+	select PHYLIB if NETDEVICES
+	select PLAT_ORION_LEGACY
+	help
+	  Support for the following Marvell Orion 5x series SoCs:
+	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
+	  Orion-2 (5281), Orion-1-90 (6183).
+
+if ARCH_ORION5X
+
+config ARCH_ORION5X_DT
+	bool "Marvell Orion5x Flattened Device Tree"
+	select ORION_CLK
+	select ORION_IRQCHIP
+	select ORION_TIMER
+	select PINCTRL
+	select PINCTRL_ORION
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Orion5x using flattened device tree.
+
+config MACH_DB88F5281
+	bool "Marvell Orion-2 Development Board"
+	select I2C_BOARDINFO if I2C
+	depends on ATAGS && UNUSED_BOARD_FILES
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Orion-2 (88F5281) Development Board
+
+config MACH_RD88F5182
+	bool "Marvell Orion-NAS Reference Design"
+	select I2C_BOARDINFO if I2C
+	depends on ATAGS && UNUSED_BOARD_FILES
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Orion-NAS (88F5182) RD2
+
+config MACH_RD88F5182_DT
+	bool "Marvell Orion-NAS Reference Design (Flattened Device Tree)"
+	select ARCH_ORION5X_DT
+	select I2C_BOARDINFO if I2C
+	help
+	  Say 'Y' here if you want your kernel to support the Marvell
+	  Orion-NAS (88F5182) RD2, Flattened Device Tree.
+
+config MACH_KUROBOX_PRO
+	bool "KuroBox Pro"
+	select I2C_BOARDINFO if I2C
+	depends on ATAGS
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  KuroBox Pro platform.
+
+config MACH_DNS323
+	bool "D-Link DNS-323"
+	select I2C_BOARDINFO if I2C
+	depends on ATAGS
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  D-Link DNS-323 platform.
+
+config MACH_TS209
+	bool "QNAP TS-109/TS-209"
+	depends on ATAGS
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QNAP TS-109/TS-209 platform.
+
+config MACH_TERASTATION_PRO2
+	bool "Buffalo Terastation Pro II/Live"
+	depends on ATAGS
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo Terastation Pro II/Live platform.
+
+config MACH_LINKSTATION_PRO
+	bool "Buffalo Linkstation Pro/Live"
+	depends on ATAGS
+	select I2C_BOARDINFO if I2C
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo Linkstation Pro/Live platform. Both v1 and
+	  v2 devices are supported.
+
+config MACH_LINKSTATION_MINI
+	bool "Buffalo Linkstation Mini (Flattened Device Tree)"
+	select ARCH_ORION5X_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo Linkstation Mini (LS-WSGL) platform.
+
+config MACH_LINKSTATION_LS_HGL
+	bool "Buffalo Linkstation LS-HGL"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	select I2C_BOARDINFO if I2C
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Buffalo Linkstation LS-HGL platform.
+
+config MACH_TS409
+	bool "QNAP TS-409"
+	depends on ATAGS
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QNAP TS-409 platform.
+
+config MACH_WRT350N_V2
+	bool "Linksys WRT350N v2"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Linksys WRT350N v2 platform.
+
+config MACH_TS78XX
+	bool "Technologic Systems TS-78xx"
+	depends on ATAGS
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Technologic Systems TS-78xx platform.
+
+config MACH_MV2120
+	bool "HP Media Vault mv2120"
+	depends on ATAGS
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  HP Media Vault mv2120 or mv5100.
+
+config MACH_D2NET_DT
+	bool "LaCie d2 Network / Big Disk Network (Flattened Device Tree)"
+	select ARCH_ORION5X_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie d2 Network NAS.
+
+config MACH_NET2BIG
+	bool "LaCie 2Big Network"
+	depends on ATAGS
+	select I2C_BOARDINFO if I2C
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie 2Big Network NAS.
+
+config MACH_MSS2_DT
+	bool "Maxtor Shared Storage II (Flattened Device Tree)"
+	select ARCH_ORION5X_DT
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Maxtor Shared Storage II platform.
+
+config MACH_WNR854T
+	bool "Netgear WNR854T"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Netgear WNR854T platform.
+
+config MACH_RD88F5181L_GE
+	bool "Marvell Orion-VoIP GE Reference Design"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Orion-VoIP GE (88F5181L) RD.
+
+config MACH_RD88F5181L_FXO
+	bool "Marvell Orion-VoIP FXO Reference Design"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Orion-VoIP FXO (88F5181L) RD.
+
+config MACH_RD88F6183AP_GE
+	bool "Marvell Orion-1-90 AP GE Reference Design"
+	depends on ATAGS && UNUSED_BOARD_FILES
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell Orion-1-90 (88F6183) AP GE RD.
+
+endif
diff --git a/arch/arm/mach-orion5x/Makefile b/arch/arm/mach-orion5x/Makefile
new file mode 100644
index 000000000..572c3520f
--- /dev/null
+++ b/arch/arm/mach-orion5x/Makefile
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0
+ccflags-y := -I$(srctree)/arch/arm/plat-orion/include
+
+obj-y				+= common.o pci.o irq.o mpp.o
+obj-$(CONFIG_MACH_DB88F5281)	+= db88f5281-setup.o
+obj-$(CONFIG_MACH_RD88F5182)	+= rd88f5182-setup.o
+obj-$(CONFIG_MACH_KUROBOX_PRO)	+= kurobox_pro-setup.o
+obj-$(CONFIG_MACH_TERASTATION_PRO2)	+= terastation_pro2-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_PRO) += kurobox_pro-setup.o
+obj-$(CONFIG_MACH_LINKSTATION_LS_HGL) += ls_hgl-setup.o
+obj-$(CONFIG_MACH_DNS323)	+= dns323-setup.o
+obj-$(CONFIG_MACH_TS209)	+= ts209-setup.o tsx09-common.o
+obj-$(CONFIG_MACH_TS409)	+= ts409-setup.o tsx09-common.o
+obj-$(CONFIG_MACH_WRT350N_V2)	+= wrt350n-v2-setup.o
+obj-$(CONFIG_MACH_TS78XX)	+= ts78xx-setup.o
+obj-$(CONFIG_MACH_MV2120)	+= mv2120-setup.o
+obj-$(CONFIG_MACH_NET2BIG)	+= net2big-setup.o
+obj-$(CONFIG_MACH_WNR854T)	+= wnr854t-setup.o
+obj-$(CONFIG_MACH_RD88F5181L_GE)	+= rd88f5181l-ge-setup.o
+obj-$(CONFIG_MACH_RD88F5181L_FXO)	+= rd88f5181l-fxo-setup.o
+obj-$(CONFIG_MACH_RD88F6183AP_GE)	+= rd88f6183ap-ge-setup.o
+
+obj-$(CONFIG_ARCH_ORION5X_DT)		+= board-dt.o
+obj-$(CONFIG_MACH_D2NET_DT)	+= board-d2net.o
+obj-$(CONFIG_MACH_MSS2_DT)	+= board-mss2.o
+obj-$(CONFIG_MACH_RD88F5182_DT)	+= board-rd88f5182.o
diff --git a/arch/arm/mach-orion5x/board-d2net.c b/arch/arm/mach-orion5x/board-d2net.c
new file mode 100644
index 000000000..0297e302d
--- /dev/null
+++ b/arch/arm/mach-orion5x/board-d2net.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/board-d2net.c
+ *
+ * LaCie d2Network and Big Disk Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * LaCie d2 Network Info
+ ****************************************************************************/
+
+/*****************************************************************************
+ * GPIO LED's
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to the CPLD and can blink in relation with the
+ * SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ * led_off   | blink_ctrl | SATA active | LED state
+ *           |            |             |
+ *    1      |     x      |      x      |  off
+ *    0      |     0      |      0      |  off
+ *    0      |     1      |      0      |  blink (rate 300ms)
+ *    0      |     x      |      1      |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Red LED have priority.
+ */
+
+#define D2NET_GPIO_RED_LED		6
+#define D2NET_GPIO_BLUE_LED_BLINK_CTRL	16
+#define D2NET_GPIO_BLUE_LED_OFF		23
+
+static struct gpio_led d2net_leds[] = {
+	{
+		.name = "d2net:blue:sata",
+		.default_trigger = "default-on",
+		.gpio = D2NET_GPIO_BLUE_LED_OFF,
+		.active_low = 1,
+	},
+	{
+		.name = "d2net:red:fail",
+		.gpio = D2NET_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data d2net_led_data = {
+	.num_leds = ARRAY_SIZE(d2net_leds),
+	.leds = d2net_leds,
+};
+
+static struct platform_device d2net_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &d2net_led_data,
+	},
+};
+
+static void __init d2net_gpio_leds_init(void)
+{
+	int err;
+
+	/* Configure register blink_ctrl to allow SATA activity LED blinking. */
+	err = gpio_request(D2NET_GPIO_BLUE_LED_BLINK_CTRL, "blue LED blink");
+	if (err == 0) {
+		err = gpio_direction_output(D2NET_GPIO_BLUE_LED_BLINK_CTRL, 1);
+		if (err)
+			gpio_free(D2NET_GPIO_BLUE_LED_BLINK_CTRL);
+	}
+	if (err)
+		pr_err("d2net: failed to configure blue LED blink GPIO\n");
+
+	platform_device_register(&d2net_gpio_leds);
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+void __init d2net_init(void)
+{
+	d2net_gpio_leds_init();
+
+	pr_notice("d2net: Flash write are not yet supported.\n");
+}
diff --git a/arch/arm/mach-orion5x/board-dt.c b/arch/arm/mach-orion5x/board-dt.c
new file mode 100644
index 000000000..be47492c6
--- /dev/null
+++ b/arch/arm/mach-orion5x/board-dt.c
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2012 (C), Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * arch/arm/mach-orion5x/board-dt.c
+ *
+ * Flattened Device Tree board initialization
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/cpu.h>
+#include <linux/mbus.h>
+#include <linux/clocksource.h>
+#include <asm/system_misc.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <plat/irq.h>
+#include <plat/time.h>
+#include "orion5x.h"
+#include "bridge-regs.h"
+#include "common.h"
+
+static struct of_dev_auxdata orion5x_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL),
+	OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0",
+		       NULL),
+	OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL),
+	OF_DEV_AUXDATA("marvell,orion-sata", 0xf1080000, "sata_mv.0", NULL),
+	OF_DEV_AUXDATA("marvell,orion-crypto", 0xf1090000, "mv_crypto", NULL),
+	{},
+};
+
+static void __init orion5x_dt_init(void)
+{
+	char *dev_name;
+	u32 dev, rev;
+
+	orion5x_id(&dev, &rev, &dev_name);
+	printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk);
+
+	BUG_ON(mvebu_mbus_dt_init(false));
+
+	/*
+	 * Setup Orion address map
+	 */
+	orion5x_setup_wins();
+
+	/*
+	 * Don't issue "Wait for Interrupt" instruction if we are
+	 * running on D0 5281 silicon.
+	 */
+	if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
+		printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
+		cpu_idle_poll_ctrl(true);
+	}
+
+	if (of_machine_is_compatible("maxtor,shared-storage-2"))
+		mss2_init();
+
+	if (of_machine_is_compatible("lacie,d2-network"))
+		d2net_init();
+
+	of_platform_default_populate(NULL, orion5x_auxdata_lookup, NULL);
+}
+
+static const char *orion5x_dt_compat[] = {
+	"marvell,orion5x",
+	NULL,
+};
+
+DT_MACHINE_START(ORION5X_DT, "Marvell Orion5x (Flattened Device Tree)")
+	/* Maintainer: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> */
+	.map_io		= orion5x_map_io,
+	.init_machine	= orion5x_dt_init,
+	.restart	= orion5x_restart,
+	.dt_compat	= orion5x_dt_compat,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
new file mode 100644
index 000000000..b0f16d223
--- /dev/null
+++ b/arch/arm/mach-orion5x/board-mss2.c
@@ -0,0 +1,86 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Maxtor Shared Storage II Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include "orion5x.h"
+#include "bridge-regs.h"
+#include "common.h"
+
+/*****************************************************************************
+ * Maxtor Shared Storage II Info
+ ****************************************************************************/
+
+/****************************************************************************
+ * PCI setup
+ ****************************************************************************/
+static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	return -1;
+}
+
+static struct hw_pci mss2_pci __initdata = {
+	.nr_controllers = 2,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= mss2_pci_map_irq,
+};
+
+static int __init mss2_pci_init(void)
+{
+	if (machine_is_mss2())
+		pci_common_init(&mss2_pci);
+
+	return 0;
+}
+subsys_initcall(mss2_pci_init);
+
+/*****************************************************************************
+ * MSS2 power off method
+ ****************************************************************************/
+/*
+ * On the Maxtor Shared Storage II, the shutdown process is the following :
+ * - Userland modifies U-boot env to tell U-boot to go idle at next boot
+ * - The board reboots
+ * - U-boot starts and go into an idle mode until the user press "power"
+ */
+static void mss2_power_off(void)
+{
+	u32 reg;
+
+	/*
+	 * Enable and issue soft reset
+	 */
+	reg = readl(RSTOUTn_MASK);
+	reg |= 1 << 2;
+	writel(reg, RSTOUTn_MASK);
+
+	reg = readl(CPU_SOFT_RESET);
+	reg |= 1;
+	writel(reg, CPU_SOFT_RESET);
+}
+
+void __init mss2_init(void)
+{
+	/* register mss2 specific power-off method */
+	pm_power_off = mss2_power_off;
+}
diff --git a/arch/arm/mach-orion5x/board-rd88f5182.c b/arch/arm/mach-orion5x/board-rd88f5182.c
new file mode 100644
index 000000000..596601367
--- /dev/null
+++ b/arch/arm/mach-orion5x/board-rd88f5182.c
@@ -0,0 +1,113 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/rd88f5182-setup.c
+ *
+ * Marvell Orion-NAS Reference Design Setup
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include "common.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * RD-88F5182 Info
+ ****************************************************************************/
+
+/*
+ * PCI
+ */
+
+#define RD88F5182_PCI_SLOT0_OFFS	7
+#define RD88F5182_PCI_SLOT0_IRQ_A_PIN	7
+#define RD88F5182_PCI_SLOT0_IRQ_B_PIN	6
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static void __init rd88f5182_pci_preinit(void)
+{
+	int pin;
+
+	/*
+	 * Configure PCI GPIO IRQ pins
+	 */
+	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
+	if (gpio_request(pin, "PCI IntA") == 0) {
+		if (gpio_direction_input(pin) == 0) {
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+		} else {
+			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
+					"set_irq_type pin %d\n", pin);
+			gpio_free(pin);
+		}
+	} else {
+		printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
+	}
+
+	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
+	if (gpio_request(pin, "PCI IntB") == 0) {
+		if (gpio_direction_input(pin) == 0) {
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+		} else {
+			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
+					"set_irq_type pin %d\n", pin);
+			gpio_free(pin);
+		}
+	} else {
+		printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
+	}
+}
+
+static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
+	u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * PCI IRQs are connected via GPIOs
+	 */
+	switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
+	case 0:
+		if (pin == 1)
+			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
+		else
+			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
+	default:
+		return -1;
+	}
+}
+
+static struct hw_pci rd88f5182_pci __initdata = {
+	.nr_controllers	= 2,
+	.preinit	= rd88f5182_pci_preinit,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= rd88f5182_pci_map_irq,
+};
+
+static int __init rd88f5182_pci_init(void)
+{
+	if (of_machine_is_compatible("marvell,rd-88f5182-nas"))
+		pci_common_init(&rd88f5182_pci);
+
+	return 0;
+}
+
+subsys_initcall(rd88f5182_pci_init);
diff --git a/arch/arm/mach-orion5x/bridge-regs.h b/arch/arm/mach-orion5x/bridge-regs.h
new file mode 100644
index 000000000..fe85bc5b1
--- /dev/null
+++ b/arch/arm/mach-orion5x/bridge-regs.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Orion CPU Bridge Registers */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include "orion5x.h"
+
+#define CPU_CONF		(ORION5X_BRIDGE_VIRT_BASE + 0x100)
+
+#define CPU_CTRL		(ORION5X_BRIDGE_VIRT_BASE + 0x104)
+
+#define RSTOUTn_MASK		(ORION5X_BRIDGE_VIRT_BASE + 0x108)
+#define RSTOUTn_MASK_PHYS	(ORION5X_BRIDGE_PHYS_BASE + 0x108)
+
+#define CPU_SOFT_RESET		(ORION5X_BRIDGE_VIRT_BASE + 0x10c)
+
+#define BRIDGE_CAUSE		(ORION5X_BRIDGE_VIRT_BASE + 0x110)
+
+#define POWER_MNG_CTRL_REG	(ORION5X_BRIDGE_VIRT_BASE + 0x11C)
+
+#define BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define MAIN_IRQ_CAUSE		(ORION5X_BRIDGE_VIRT_BASE + 0x200)
+
+#define MAIN_IRQ_MASK		(ORION5X_BRIDGE_VIRT_BASE + 0x204)
+
+#define TIMER_VIRT_BASE		(ORION5X_BRIDGE_VIRT_BASE + 0x300)
+#define TIMER_PHYS_BASE		(ORION5X_BRIDGE_PHYS_BASE + 0x300)
+#endif
diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c
new file mode 100644
index 000000000..2e711b725
--- /dev/null
+++ b/arch/arm/mach-orion5x/common.c
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/common.c
+ *
+ * Core functions for Marvell Orion 5x SoCs
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/serial_8250.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/delay.h>
+#include <linux/clk-provider.h>
+#include <linux/cpu.h>
+#include <linux/platform_data/dsa.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/system_misc.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include <linux/platform_data/usb-ehci-orion.h>
+#include <plat/time.h>
+#include <plat/common.h>
+
+#include "bridge-regs.h"
+#include "common.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc orion5x_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long) ORION5X_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(ORION5X_REGS_PHYS_BASE),
+		.length		= ORION5X_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long) ORION5X_PCIE_WA_VIRT_BASE,
+		.pfn		= __phys_to_pfn(ORION5X_PCIE_WA_PHYS_BASE),
+		.length		= ORION5X_PCIE_WA_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init orion5x_map_io(void)
+{
+	iotable_init(orion5x_io_desc, ARRAY_SIZE(orion5x_io_desc));
+}
+
+
+/*****************************************************************************
+ * CLK tree
+ ****************************************************************************/
+static struct clk *tclk;
+
+void __init clk_init(void)
+{
+	tclk = clk_register_fixed_rate(NULL, "tclk", NULL, 0, orion5x_tclk);
+
+	orion_clkdev_init(tclk);
+}
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+void __init orion5x_ehci0_init(void)
+{
+	orion_ehci_init(ORION5X_USB0_PHYS_BASE, IRQ_ORION5X_USB0_CTRL,
+			EHCI_PHY_ORION);
+}
+
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+void __init orion5x_ehci1_init(void)
+{
+	orion_ehci_1_init(ORION5X_USB1_PHYS_BASE, IRQ_ORION5X_USB1_CTRL);
+}
+
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	orion_ge00_init(eth_data,
+			ORION5X_ETH_PHYS_BASE, IRQ_ORION5X_ETH_SUM,
+			IRQ_ORION5X_ETH_ERR,
+			MV643XX_TX_CSUM_DEFAULT_LIMIT);
+}
+
+
+/*****************************************************************************
+ * Ethernet switch
+ ****************************************************************************/
+void __init orion5x_eth_switch_init(struct dsa_chip_data *d)
+{
+	orion_ge00_switch_init(d);
+}
+
+
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+void __init orion5x_i2c_init(void)
+{
+	orion_i2c_init(I2C_PHYS_BASE, IRQ_ORION5X_I2C, 8);
+
+}
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data)
+{
+	orion_sata_init(sata_data, ORION5X_SATA_PHYS_BASE, IRQ_ORION5X_SATA);
+}
+
+
+/*****************************************************************************
+ * SPI
+ ****************************************************************************/
+void __init orion5x_spi_init(void)
+{
+	orion_spi_init(SPI_PHYS_BASE);
+}
+
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+void __init orion5x_uart0_init(void)
+{
+	orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE,
+			 IRQ_ORION5X_UART0, tclk);
+}
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+void __init orion5x_uart1_init(void)
+{
+	orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE,
+			 IRQ_ORION5X_UART1, tclk);
+}
+
+/*****************************************************************************
+ * XOR engine
+ ****************************************************************************/
+void __init orion5x_xor_init(void)
+{
+	orion_xor0_init(ORION5X_XOR_PHYS_BASE,
+			ORION5X_XOR_PHYS_BASE + 0x200,
+			IRQ_ORION5X_XOR0, IRQ_ORION5X_XOR1);
+}
+
+/*****************************************************************************
+ * Cryptographic Engines and Security Accelerator (CESA)
+ ****************************************************************************/
+static void __init orion5x_crypto_init(void)
+{
+	mvebu_mbus_add_window_by_id(ORION_MBUS_SRAM_TARGET,
+				    ORION_MBUS_SRAM_ATTR,
+				    ORION5X_SRAM_PHYS_BASE,
+				    ORION5X_SRAM_SIZE);
+	orion_crypto_init(ORION5X_CRYPTO_PHYS_BASE, ORION5X_SRAM_PHYS_BASE,
+			  SZ_8K, IRQ_ORION5X_CESA);
+}
+
+/*****************************************************************************
+ * Watchdog
+ ****************************************************************************/
+static struct resource orion_wdt_resource[] = {
+		DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x04),
+		DEFINE_RES_MEM(RSTOUTn_MASK_PHYS, 0x04),
+};
+
+static struct platform_device orion_wdt_device = {
+	.name		= "orion_wdt",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(orion_wdt_resource),
+	.resource	= orion_wdt_resource,
+};
+
+static void __init orion5x_wdt_init(void)
+{
+	platform_device_register(&orion_wdt_device);
+}
+
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+void __init orion5x_init_early(void)
+{
+	u32 rev, dev;
+	const char *mbus_soc_name;
+
+	orion_time_set_base(TIMER_VIRT_BASE);
+
+	/* Initialize the MBUS driver */
+	orion5x_pcie_id(&dev, &rev);
+	if (dev == MV88F5281_DEV_ID)
+		mbus_soc_name = "marvell,orion5x-88f5281-mbus";
+	else if (dev == MV88F5182_DEV_ID)
+		mbus_soc_name = "marvell,orion5x-88f5182-mbus";
+	else if (dev == MV88F5181_DEV_ID)
+		mbus_soc_name = "marvell,orion5x-88f5181-mbus";
+	else if (dev == MV88F6183_DEV_ID)
+		mbus_soc_name = "marvell,orion5x-88f6183-mbus";
+	else
+		mbus_soc_name = NULL;
+	mvebu_mbus_init(mbus_soc_name, ORION5X_BRIDGE_WINS_BASE,
+			ORION5X_BRIDGE_WINS_SZ,
+			ORION5X_DDR_WINS_BASE, ORION5X_DDR_WINS_SZ);
+}
+
+void orion5x_setup_wins(void)
+{
+	/*
+	 * The PCIe windows will no longer be statically allocated
+	 * here once Orion5x is migrated to the pci-mvebu driver.
+	 */
+	mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCIE_IO_TARGET,
+					  ORION_MBUS_PCIE_IO_ATTR,
+					  ORION5X_PCIE_IO_PHYS_BASE,
+					  ORION5X_PCIE_IO_SIZE,
+					  ORION5X_PCIE_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_MEM_TARGET,
+				    ORION_MBUS_PCIE_MEM_ATTR,
+				    ORION5X_PCIE_MEM_PHYS_BASE,
+				    ORION5X_PCIE_MEM_SIZE);
+	mvebu_mbus_add_window_remap_by_id(ORION_MBUS_PCI_IO_TARGET,
+					  ORION_MBUS_PCI_IO_ATTR,
+					  ORION5X_PCI_IO_PHYS_BASE,
+					  ORION5X_PCI_IO_SIZE,
+					  ORION5X_PCI_IO_BUS_BASE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_PCI_MEM_TARGET,
+				    ORION_MBUS_PCI_MEM_ATTR,
+				    ORION5X_PCI_MEM_PHYS_BASE,
+				    ORION5X_PCI_MEM_SIZE);
+}
+
+int orion5x_tclk;
+
+static int __init orion5x_find_tclk(void)
+{
+	u32 dev, rev;
+
+	orion5x_pcie_id(&dev, &rev);
+	if (dev == MV88F6183_DEV_ID &&
+	    (readl(MPP_RESET_SAMPLE) & 0x00000200) == 0)
+		return 133333333;
+
+	return 166666667;
+}
+
+void __init orion5x_timer_init(void)
+{
+	orion5x_tclk = orion5x_find_tclk();
+
+	orion_time_init(ORION5X_BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR,
+			IRQ_ORION5X_BRIDGE, orion5x_tclk);
+}
+
+
+/*****************************************************************************
+ * General
+ ****************************************************************************/
+/*
+ * Identify device ID and rev from PCIe configuration header space '0'.
+ */
+void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name)
+{
+	orion5x_pcie_id(dev, rev);
+
+	if (*dev == MV88F5281_DEV_ID) {
+		if (*rev == MV88F5281_REV_D2) {
+			*dev_name = "MV88F5281-D2";
+		} else if (*rev == MV88F5281_REV_D1) {
+			*dev_name = "MV88F5281-D1";
+		} else if (*rev == MV88F5281_REV_D0) {
+			*dev_name = "MV88F5281-D0";
+		} else {
+			*dev_name = "MV88F5281-Rev-Unsupported";
+		}
+	} else if (*dev == MV88F5182_DEV_ID) {
+		if (*rev == MV88F5182_REV_A2) {
+			*dev_name = "MV88F5182-A2";
+		} else {
+			*dev_name = "MV88F5182-Rev-Unsupported";
+		}
+	} else if (*dev == MV88F5181_DEV_ID) {
+		if (*rev == MV88F5181_REV_B1) {
+			*dev_name = "MV88F5181-Rev-B1";
+		} else if (*rev == MV88F5181L_REV_A1) {
+			*dev_name = "MV88F5181L-Rev-A1";
+		} else {
+			*dev_name = "MV88F5181(L)-Rev-Unsupported";
+		}
+	} else if (*dev == MV88F6183_DEV_ID) {
+		if (*rev == MV88F6183_REV_B0) {
+			*dev_name = "MV88F6183-Rev-B0";
+		} else {
+			*dev_name = "MV88F6183-Rev-Unsupported";
+		}
+	} else {
+		*dev_name = "Device-Unknown";
+	}
+}
+
+void __init orion5x_init(void)
+{
+	char *dev_name;
+	u32 dev, rev;
+
+	orion5x_id(&dev, &rev, &dev_name);
+	printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk);
+
+	/*
+	 * Setup Orion address map
+	 */
+	orion5x_setup_wins();
+
+	/* Setup root of clk tree */
+	clk_init();
+
+	/*
+	 * Don't issue "Wait for Interrupt" instruction if we are
+	 * running on D0 5281 silicon.
+	 */
+	if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) {
+		printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
+		cpu_idle_poll_ctrl(true);
+	}
+
+	/*
+	 * The 5082/5181l/5182/6082/6082l/6183 have crypto
+	 * while 5180n/5181/5281 don't have crypto.
+	 */
+	if ((dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0) ||
+	    dev == MV88F5182_DEV_ID || dev == MV88F6183_DEV_ID)
+		orion5x_crypto_init();
+
+	/*
+	 * Register watchdog driver
+	 */
+	orion5x_wdt_init();
+}
+
+void orion5x_restart(enum reboot_mode mode, const char *cmd)
+{
+	/*
+	 * Enable and issue soft reset
+	 */
+	orion5x_setbits(RSTOUTn_MASK, (1 << 2));
+	orion5x_setbits(CPU_SOFT_RESET, 1);
+	mdelay(200);
+	orion5x_clrbits(CPU_SOFT_RESET, 1);
+}
+
+/*
+ * Many orion-based systems have buggy bootloader implementations.
+ * This is a common fixup for bogus memory tags.
+ */
+void __init tag_fixup_mem32(struct tag *t, char **from)
+{
+	for (; t->hdr.size; t = tag_next(t))
+		if (t->hdr.tag == ATAG_MEM &&
+		    (!t->u.mem.size || t->u.mem.size & ~PAGE_MASK ||
+		     t->u.mem.start & ~PAGE_MASK)) {
+			printk(KERN_WARNING
+			       "Clearing invalid memory bank %dKB@0x%08x\n",
+			       t->u.mem.size / 1024, t->u.mem.start);
+			t->hdr.tag = 0;
+		}
+}
diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h
new file mode 100644
index 000000000..b9cfdb456
--- /dev/null
+++ b/arch/arm/mach-orion5x/common.h
@@ -0,0 +1,94 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ARCH_ORION5X_COMMON_H
+#define __ARCH_ORION5X_COMMON_H
+
+#include <linux/reboot.h>
+
+struct dsa_chip_data;
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+#define ORION_MBUS_PCIE_MEM_TARGET    0x04
+#define ORION_MBUS_PCIE_MEM_ATTR      0x59
+#define ORION_MBUS_PCIE_IO_TARGET     0x04
+#define ORION_MBUS_PCIE_IO_ATTR       0x51
+#define ORION_MBUS_PCIE_WA_TARGET     0x04
+#define ORION_MBUS_PCIE_WA_ATTR       0x79
+#define ORION_MBUS_PCI_MEM_TARGET     0x03
+#define ORION_MBUS_PCI_MEM_ATTR       0x59
+#define ORION_MBUS_PCI_IO_TARGET      0x03
+#define ORION_MBUS_PCI_IO_ATTR        0x51
+#define ORION_MBUS_DEVBUS_BOOT_TARGET 0x01
+#define ORION_MBUS_DEVBUS_BOOT_ATTR   0x0f
+#define ORION_MBUS_DEVBUS_TARGET(cs)  0x01
+#define ORION_MBUS_DEVBUS_ATTR(cs)    (~(1 << cs))
+#define ORION_MBUS_SRAM_TARGET        0x09
+#define ORION_MBUS_SRAM_ATTR          0x00
+
+/*
+ * Basic Orion init functions used early by machine-setup.
+ */
+void orion5x_map_io(void);
+void orion5x_init_early(void);
+void orion5x_init_irq(void);
+void orion5x_init(void);
+void orion5x_id(u32 *dev, u32 *rev, char **dev_name);
+void clk_init(void);
+extern int orion5x_tclk;
+extern void orion5x_timer_init(void);
+
+void orion5x_setup_wins(void);
+
+void orion5x_ehci0_init(void);
+void orion5x_ehci1_init(void);
+void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data);
+void orion5x_eth_switch_init(struct dsa_chip_data *d);
+void orion5x_i2c_init(void);
+void orion5x_sata_init(struct mv_sata_platform_data *sata_data);
+void orion5x_spi_init(void);
+void orion5x_uart0_init(void);
+void orion5x_uart1_init(void);
+void orion5x_xor_init(void);
+void orion5x_restart(enum reboot_mode, const char *);
+
+/*
+ * PCIe/PCI functions.
+ */
+struct pci_bus;
+struct pci_host_bridge;
+struct pci_sys_data;
+struct pci_dev;
+
+void orion5x_pcie_id(u32 *dev, u32 *rev);
+void orion5x_pci_disable(void);
+void orion5x_pci_set_cardbus_mode(void);
+int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys);
+int orion5x_pci_sys_scan_bus(int nr, struct pci_host_bridge *bridge);
+int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+
+struct tag;
+extern void __init tag_fixup_mem32(struct tag *, char **);
+
+#ifdef CONFIG_MACH_MSS2_DT
+extern void mss2_init(void);
+#else
+static inline void mss2_init(void) {}
+#endif
+
+#ifdef CONFIG_MACH_D2NET_DT
+void d2net_init(void);
+#else
+static inline void d2net_init(void) {}
+#endif
+
+/*****************************************************************************
+ * Helpers to access Orion registers
+ ****************************************************************************/
+/*
+ * These are not preempt-safe.  Locks, if needed, must be taken
+ * care of by the caller.
+ */
+#define orion5x_setbits(r, mask)	writel(readl(r) | (mask), (r))
+#define orion5x_clrbits(r, mask)	writel(readl(r) & ~(mask), (r))
+
+#endif
diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c
new file mode 100644
index 000000000..fe1a4cef1
--- /dev/null
+++ b/arch/arm/mach-orion5x/db88f5281-setup.c
@@ -0,0 +1,376 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/db88f5281-setup.c
+ *
+ * Marvell Orion-2 Development Board Setup
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/timer.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * DB-88F5281 on board devices
+ ****************************************************************************/
+
+/*
+ * 512K NOR flash Device bus boot chip select
+ */
+
+#define DB88F5281_NOR_BOOT_BASE		0xf4000000
+#define DB88F5281_NOR_BOOT_SIZE		SZ_512K
+
+/*
+ * 7-Segment on Device bus chip select 0
+ */
+
+#define DB88F5281_7SEG_BASE		0xfa000000
+#define DB88F5281_7SEG_SIZE		SZ_1K
+
+/*
+ * 32M NOR flash on Device bus chip select 1
+ */
+
+#define DB88F5281_NOR_BASE		0xfc000000
+#define DB88F5281_NOR_SIZE		SZ_32M
+
+/*
+ * 32M NAND flash on Device bus chip select 2
+ */
+
+#define DB88F5281_NAND_BASE		0xfa800000
+#define DB88F5281_NAND_SIZE		SZ_1K
+
+/*
+ * PCI
+ */
+
+#define DB88F5281_PCI_SLOT0_OFFS		7
+#define DB88F5281_PCI_SLOT0_IRQ_PIN		12
+#define DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN	13
+
+/*****************************************************************************
+ * 512M NOR Flash on Device bus Boot CS
+ ****************************************************************************/
+
+static struct physmap_flash_data db88f5281_boot_flash_data = {
+	.width		= 1,	/* 8 bit bus width */
+};
+
+static struct resource db88f5281_boot_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= DB88F5281_NOR_BOOT_BASE,
+	.end		= DB88F5281_NOR_BOOT_BASE + DB88F5281_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device db88f5281_boot_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &db88f5281_boot_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &db88f5281_boot_flash_resource,
+};
+
+/*****************************************************************************
+ * 32M NOR Flash on Device bus CS1
+ ****************************************************************************/
+
+static struct physmap_flash_data db88f5281_nor_flash_data = {
+	.width		= 4,	/* 32 bit bus width */
+};
+
+static struct resource db88f5281_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= DB88F5281_NOR_BASE,
+	.end		= DB88F5281_NOR_BASE + DB88F5281_NOR_SIZE - 1,
+};
+
+static struct platform_device db88f5281_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &db88f5281_nor_flash_data,
+	},
+	.num_resources	= 1,
+	.resource	= &db88f5281_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * 32M NAND Flash on Device bus CS2
+ ****************************************************************************/
+
+static struct mtd_partition db88f5281_nand_parts[] = {
+	{
+		.name = "kernel",
+		.offset = 0,
+		.size = SZ_2M,
+	}, {
+		.name = "root",
+		.offset = SZ_2M,
+		.size = (SZ_16M - SZ_2M),
+	}, {
+		.name = "user",
+		.offset = SZ_16M,
+		.size = SZ_8M,
+	}, {
+		.name = "recovery",
+		.offset = (SZ_16M + SZ_8M),
+		.size = SZ_8M,
+	},
+};
+
+static struct resource db88f5281_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= DB88F5281_NAND_BASE,
+	.end		= DB88F5281_NAND_BASE + DB88F5281_NAND_SIZE - 1,
+};
+
+static struct orion_nand_data db88f5281_nand_data = {
+	.parts		= db88f5281_nand_parts,
+	.nr_parts	= ARRAY_SIZE(db88f5281_nand_parts),
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+};
+
+static struct platform_device db88f5281_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &db88f5281_nand_data,
+	},
+	.resource	= &db88f5281_nand_resource,
+	.num_resources	= 1,
+};
+
+/*****************************************************************************
+ * 7-Segment on Device bus CS0
+ * Dummy counter every 2 sec
+ ****************************************************************************/
+
+static void __iomem *db88f5281_7seg;
+static struct timer_list db88f5281_timer;
+
+static void db88f5281_7seg_event(struct timer_list *unused)
+{
+	static int count = 0;
+	writel(0, db88f5281_7seg + (count << 4));
+	count = (count + 1) & 7;
+	mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
+}
+
+static int __init db88f5281_7seg_init(void)
+{
+	if (machine_is_db88f5281()) {
+		db88f5281_7seg = ioremap(DB88F5281_7SEG_BASE,
+					DB88F5281_7SEG_SIZE);
+		if (!db88f5281_7seg) {
+			printk(KERN_ERR "Failed to ioremap db88f5281_7seg\n");
+			return -EIO;
+		}
+		timer_setup(&db88f5281_timer, db88f5281_7seg_event, 0);
+		mod_timer(&db88f5281_timer, jiffies + 2 * HZ);
+	}
+
+	return 0;
+}
+
+__initcall(db88f5281_7seg_init);
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static void __init db88f5281_pci_preinit(void)
+{
+	int pin;
+
+	/*
+	 * Configure PCI GPIO IRQ pins
+	 */
+	pin = DB88F5281_PCI_SLOT0_IRQ_PIN;
+	if (gpio_request(pin, "PCI Int1") == 0) {
+		if (gpio_direction_input(pin) == 0) {
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+		} else {
+			printk(KERN_ERR "db88f5281_pci_preinit failed to "
+					"set_irq_type pin %d\n", pin);
+			gpio_free(pin);
+		}
+	} else {
+		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
+	}
+
+	pin = DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN;
+	if (gpio_request(pin, "PCI Int2") == 0) {
+		if (gpio_direction_input(pin) == 0) {
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+		} else {
+			printk(KERN_ERR "db88f5281_pci_preinit failed "
+					"to set_irq_type pin %d\n", pin);
+			gpio_free(pin);
+		}
+	} else {
+		printk(KERN_ERR "db88f5281_pci_preinit failed to gpio_request %d\n", pin);
+	}
+}
+
+static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot,
+	u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * PCI IRQs are connected via GPIOs.
+	 */
+	switch (slot - DB88F5281_PCI_SLOT0_OFFS) {
+	case 0:
+		return gpio_to_irq(DB88F5281_PCI_SLOT0_IRQ_PIN);
+	case 1:
+	case 2:
+		return gpio_to_irq(DB88F5281_PCI_SLOT1_SLOT2_IRQ_PIN);
+	default:
+		return -1;
+	}
+}
+
+static struct hw_pci db88f5281_pci __initdata = {
+	.nr_controllers	= 2,
+	.preinit	= db88f5281_pci_preinit,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= db88f5281_pci_map_irq,
+};
+
+static int __init db88f5281_pci_init(void)
+{
+	if (machine_is_db88f5281())
+		pci_common_init(&db88f5281_pci);
+
+	return 0;
+}
+
+subsys_initcall(db88f5281_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data db88f5281_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * RTC DS1339 on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata db88f5281_i2c_rtc = {
+	I2C_BOARD_INFO("ds1339", 0x68),
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int db88f5281_mpp_modes[] __initdata = {
+	MPP0_GPIO,		/* USB Over Current */
+	MPP1_GPIO,		/* USB Vbat input */
+	MPP2_PCI_ARB,		/* PCI_REQn[2] */
+	MPP3_PCI_ARB,		/* PCI_GNTn[2] */
+	MPP4_PCI_ARB,		/* PCI_REQn[3] */
+	MPP5_PCI_ARB,		/* PCI_GNTn[3] */
+	MPP6_GPIO,		/* JP0, CON17.2 */
+	MPP7_GPIO,		/* JP1, CON17.1 */
+	MPP8_GPIO,		/* JP2, CON11.2 */
+	MPP9_GPIO,		/* JP3, CON11.3 */
+	MPP10_GPIO,		/* RTC int */
+	MPP11_GPIO,		/* Baud Rate Generator */
+	MPP12_GPIO,		/* PCI int 1 */
+	MPP13_GPIO,		/* PCI int 2 */
+	MPP14_NAND,		/* NAND_REn[2] */
+	MPP15_NAND,		/* NAND_WEn[2] */
+	MPP16_UART,		/* UART1_RX */
+	MPP17_UART,		/* UART1_TX */
+	MPP18_UART,		/* UART1_CTSn */
+	MPP19_UART,		/* UART1_RTSn */
+	0,
+};
+
+static void __init db88f5281_init(void)
+{
+	/*
+	 * Basic Orion setup. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(db88f5281_mpp_modes);
+	writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&db88f5281_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+	orion5x_uart1_init();
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    DB88F5281_NOR_BOOT_BASE,
+				    DB88F5281_NOR_BOOT_SIZE);
+	platform_device_register(&db88f5281_boot_flash);
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
+				    ORION_MBUS_DEVBUS_ATTR(0),
+				    DB88F5281_7SEG_BASE,
+				    DB88F5281_7SEG_SIZE);
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
+				    ORION_MBUS_DEVBUS_ATTR(1),
+				    DB88F5281_NOR_BASE,
+				    DB88F5281_NOR_SIZE);
+	platform_device_register(&db88f5281_nor_flash);
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(2),
+				    ORION_MBUS_DEVBUS_ATTR(2),
+				    DB88F5281_NAND_BASE,
+				    DB88F5281_NAND_SIZE);
+	platform_device_register(&db88f5281_nand_flash);
+
+	i2c_register_board_info(0, &db88f5281_i2c_rtc, 1);
+}
+
+MACHINE_START(DB88F5281, "Marvell Orion-2 Development Board")
+	/* Maintainer: Tzachi Perelstein <tzachi@marvell.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= db88f5281_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
new file mode 100644
index 000000000..d69259b6b
--- /dev/null
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -0,0 +1,724 @@
+/*
+ * arch/arm/mach-orion5x/dns323-setup.c
+ *
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * Support for HW Rev C1:
+ *
+ * Copyright (C) 2010 Benjamin Herrenschmidt <benh@kernel.crashing.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/phy.h>
+#include <linux/marvell_phy.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <asm/system_info.h>
+#include <plat/orion-gpio.h>
+#include "orion5x.h"
+#include "common.h"
+#include "mpp.h"
+
+/* Rev A1 and B1 */
+#define DNS323_GPIO_LED_RIGHT_AMBER	1
+#define DNS323_GPIO_LED_LEFT_AMBER	2
+#define DNS323_GPIO_SYSTEM_UP		3
+#define DNS323_GPIO_LED_POWER1		4
+#define DNS323_GPIO_LED_POWER2		5
+#define DNS323_GPIO_OVERTEMP		6
+#define DNS323_GPIO_RTC			7
+#define DNS323_GPIO_POWER_OFF		8
+#define DNS323_GPIO_KEY_POWER		9
+#define DNS323_GPIO_KEY_RESET		10
+
+/* Rev C1 */
+#define DNS323C_GPIO_KEY_POWER		1
+#define DNS323C_GPIO_POWER_OFF		2
+#define DNS323C_GPIO_LED_RIGHT_AMBER	8
+#define DNS323C_GPIO_LED_LEFT_AMBER	9
+#define DNS323C_GPIO_LED_POWER		17
+#define DNS323C_GPIO_FAN_BIT1		18
+#define DNS323C_GPIO_FAN_BIT0		19
+
+/* Exposed to userspace, do not change */
+enum {
+	DNS323_REV_A1,	/* 0 */
+	DNS323_REV_B1,	/* 1 */
+	DNS323_REV_C1,	/* 2 */
+};
+
+
+/****************************************************************************
+ * PCI setup
+ */
+
+static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	return -1;
+}
+
+static struct hw_pci dns323_pci __initdata = {
+	.nr_controllers = 2,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= dns323_pci_map_irq,
+};
+
+static int __init dns323_pci_init(void)
+{
+	/* Rev B1 and C1 doesn't really use its PCI bus, and initialising PCI
+	 * gets in the way of initialising the SATA controller.
+	 */
+	if (machine_is_dns323() && system_rev == DNS323_REV_A1)
+		pci_common_init(&dns323_pci);
+
+	return 0;
+}
+
+subsys_initcall(dns323_pci_init);
+
+/****************************************************************************
+ * 8MiB NOR flash (Spansion S29GL064M90TFIR4)
+ *
+ * Layout as used by D-Link:
+ *  0x00000000-0x00010000 : "MTD1"
+ *  0x00010000-0x00020000 : "MTD2"
+ *  0x00020000-0x001a0000 : "Linux Kernel"
+ *  0x001a0000-0x007d0000 : "File System"
+ *  0x007d0000-0x00800000 : "u-boot"
+ */
+
+#define DNS323_NOR_BOOT_BASE 0xf4000000
+#define DNS323_NOR_BOOT_SIZE SZ_8M
+
+static struct mtd_partition dns323_partitions[] = {
+	{
+		.name	= "MTD1",
+		.size	= 0x00010000,
+		.offset	= 0,
+	}, {
+		.name	= "MTD2",
+		.size	= 0x00010000,
+		.offset = 0x00010000,
+	}, {
+		.name	= "Linux Kernel",
+		.size	= 0x00180000,
+		.offset	= 0x00020000,
+	}, {
+		.name	= "File System",
+		.size	= 0x00630000,
+		.offset	= 0x001A0000,
+	}, {
+		.name	= "u-boot",
+		.size	= 0x00030000,
+		.offset	= 0x007d0000,
+	},
+};
+
+static struct physmap_flash_data dns323_nor_flash_data = {
+	.width		= 1,
+	.parts		= dns323_partitions,
+	.nr_parts	= ARRAY_SIZE(dns323_partitions)
+};
+
+static struct resource dns323_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= DNS323_NOR_BOOT_BASE,
+	.end		= DNS323_NOR_BOOT_BASE + DNS323_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device dns323_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &dns323_nor_flash_data,
+	},
+	.resource	= &dns323_nor_flash_resource,
+	.num_resources	= 1,
+};
+
+/****************************************************************************
+ * Ethernet
+ */
+
+static struct mv643xx_eth_platform_data dns323_eth_data = {
+	.phy_addr = MV643XX_ETH_PHY_ADDR(8),
+};
+
+/* dns323_parse_hex_*() taken from tsx09-common.c; should a common copy of these
+ * functions be kept somewhere?
+ */
+static int __init dns323_parse_hex_nibble(char n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init dns323_parse_hex_byte(const char *b)
+{
+	int hi;
+	int lo;
+
+	hi = dns323_parse_hex_nibble(b[0]);
+	lo = dns323_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
+static int __init dns323_read_mac_addr(void)
+{
+	u_int8_t addr[6];
+	int i;
+	char *mac_page;
+
+	/* MAC address is stored as a regular ol' string in /dev/mtdblock4
+	 * (0x007d0000-0x00800000) starting at offset 196480 (0x2ff80).
+	 */
+	mac_page = ioremap(DNS323_NOR_BOOT_BASE + 0x7d0000 + 196480, 1024);
+	if (!mac_page)
+		return -ENOMEM;
+
+	/* Sanity check the string we're looking at */
+	for (i = 0; i < 5; i++) {
+		if (*(mac_page + (i * 3) + 2) != ':') {
+			goto error_fail;
+		}
+	}
+
+	for (i = 0; i < 6; i++)	{
+		int byte;
+
+		byte = dns323_parse_hex_byte(mac_page + (i * 3));
+		if (byte < 0) {
+			goto error_fail;
+		}
+
+		addr[i] = byte;
+	}
+
+	iounmap(mac_page);
+	printk("DNS-323: Found ethernet MAC address: %pM\n", addr);
+
+	memcpy(dns323_eth_data.mac_addr, addr, 6);
+
+	return 0;
+
+error_fail:
+	iounmap(mac_page);
+	return -EINVAL;
+}
+
+/****************************************************************************
+ * GPIO LEDs (simple - doesn't use hardware blinking support)
+ */
+
+static struct gpio_led dns323ab_leds[] = {
+	{
+		.name = "power:blue",
+		.gpio = DNS323_GPIO_LED_POWER2,
+		.default_trigger = "default-on",
+	}, {
+		.name = "right:amber",
+		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
+		.active_low = 1,
+	}, {
+		.name = "left:amber",
+		.gpio = DNS323_GPIO_LED_LEFT_AMBER,
+		.active_low = 1,
+	},
+};
+
+
+static struct gpio_led dns323c_leds[] = {
+	{
+		.name = "power:blue",
+		.gpio = DNS323C_GPIO_LED_POWER,
+		.default_trigger = "timer",
+		.active_low = 1,
+	}, {
+		.name = "right:amber",
+		.gpio = DNS323C_GPIO_LED_RIGHT_AMBER,
+		.active_low = 1,
+	}, {
+		.name = "left:amber",
+		.gpio = DNS323C_GPIO_LED_LEFT_AMBER,
+		.active_low = 1,
+	},
+};
+
+
+static struct gpio_led_platform_data dns323ab_led_data = {
+	.num_leds	= ARRAY_SIZE(dns323ab_leds),
+	.leds		= dns323ab_leds,
+	.gpio_blink_set = orion_gpio_led_blink_set,
+};
+
+static struct gpio_led_platform_data dns323c_led_data = {
+	.num_leds	= ARRAY_SIZE(dns323c_leds),
+	.leds		= dns323c_leds,
+	.gpio_blink_set = orion_gpio_led_blink_set,
+};
+
+static struct platform_device dns323_gpio_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &dns323ab_led_data,
+	},
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ */
+
+static struct gpio_keys_button dns323ab_buttons[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= DNS323_GPIO_KEY_RESET,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_POWER,
+		.gpio		= DNS323_GPIO_KEY_POWER,
+		.desc		= "Power Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data dns323ab_button_data = {
+	.buttons	= dns323ab_buttons,
+	.nbuttons	= ARRAY_SIZE(dns323ab_buttons),
+};
+
+static struct gpio_keys_button dns323c_buttons[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= DNS323C_GPIO_KEY_POWER,
+		.desc		= "Power Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data dns323c_button_data = {
+	.buttons	= dns323c_buttons,
+	.nbuttons	= ARRAY_SIZE(dns323c_buttons),
+};
+
+static struct platform_device dns323_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &dns323ab_button_data,
+	},
+};
+
+/*****************************************************************************
+ * SATA
+ */
+static struct mv_sata_platform_data dns323_sata_data = {
+       .n_ports        = 2,
+};
+
+/****************************************************************************
+ * General Setup
+ */
+static unsigned int dns323a_mpp_modes[] __initdata = {
+	MPP0_PCIE_RST_OUTn,
+	MPP1_GPIO,		/* right amber LED (sata ch0) */
+	MPP2_GPIO,		/* left amber LED (sata ch1) */
+	MPP3_UNUSED,
+	MPP4_GPIO,		/* power button LED */
+	MPP5_GPIO,		/* power button LED */
+	MPP6_GPIO,		/* GMT G751-2f overtemp */
+	MPP7_GPIO,		/* M41T80 nIRQ/OUT/SQW */
+	MPP8_GPIO,		/* triggers power off */
+	MPP9_GPIO,		/* power button switch */
+	MPP10_GPIO,		/* reset button switch */
+	MPP11_UNUSED,
+	MPP12_UNUSED,
+	MPP13_UNUSED,
+	MPP14_UNUSED,
+	MPP15_UNUSED,
+	MPP16_UNUSED,
+	MPP17_UNUSED,
+	MPP18_UNUSED,
+	MPP19_UNUSED,
+	0,
+};
+
+static unsigned int dns323b_mpp_modes[] __initdata = {
+	MPP0_UNUSED,
+	MPP1_GPIO,		/* right amber LED (sata ch0) */
+	MPP2_GPIO,		/* left amber LED (sata ch1) */
+	MPP3_GPIO,		/* system up flag */
+	MPP4_GPIO,		/* power button LED */
+	MPP5_GPIO,		/* power button LED */
+	MPP6_GPIO,		/* GMT G751-2f overtemp */
+	MPP7_GPIO,		/* M41T80 nIRQ/OUT/SQW */
+	MPP8_GPIO,		/* triggers power off */
+	MPP9_GPIO,		/* power button switch */
+	MPP10_GPIO,		/* reset button switch */
+	MPP11_UNUSED,
+	MPP12_SATA_LED,
+	MPP13_SATA_LED,
+	MPP14_SATA_LED,
+	MPP15_SATA_LED,
+	MPP16_UNUSED,
+	MPP17_UNUSED,
+	MPP18_UNUSED,
+	MPP19_UNUSED,
+	0,
+};
+
+static unsigned int dns323c_mpp_modes[] __initdata = {
+	MPP0_GPIO,		/* ? input */
+	MPP1_GPIO,		/* input power switch (0 = pressed) */
+	MPP2_GPIO,		/* output power off */
+	MPP3_UNUSED,		/* ? output */
+	MPP4_UNUSED,		/* ? output */
+	MPP5_UNUSED,		/* ? output */
+	MPP6_UNUSED,		/* ? output */
+	MPP7_UNUSED,		/* ? output */
+	MPP8_GPIO,		/* i/o right amber LED */
+	MPP9_GPIO,		/* i/o left amber LED */
+	MPP10_GPIO,		/* input */
+	MPP11_UNUSED,
+	MPP12_SATA_LED,
+	MPP13_SATA_LED,
+	MPP14_SATA_LED,
+	MPP15_SATA_LED,
+	MPP16_UNUSED,
+	MPP17_GPIO,		/* power button LED */
+	MPP18_GPIO,		/* fan speed bit 0 */
+	MPP19_GPIO,		/* fan speed bit 1 */
+	0,
+};
+
+/* Rev C1 Fan speed notes:
+ *
+ * The fan is controlled by 2 GPIOs on this board. The settings
+ * of the bits is as follow:
+ *
+ *  GPIO 18    GPIO 19    Fan
+ *
+ *    0          0        stopped
+ *    0          1        low speed
+ *    1          0        high speed
+ *    1          1        don't do that (*)
+ *
+ * (*) I think the two bits control two feed-in resistors into a fixed
+ *     PWN circuit, setting both bits will basically go a 'bit' faster
+ *     than high speed, but d-link doesn't do it and you may get out of
+ *     HW spec so don't do it.
+ */
+
+/*
+ * On the DNS-323 A1 and B1 the following devices are attached via I2C:
+ *
+ *  i2c addr | chip        | description
+ *  0x3e     | GMT G760Af  | fan speed PWM controller
+ *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
+ *  0x68     | ST M41T80   | RTC w/ alarm
+ */
+static struct i2c_board_info __initdata dns323ab_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("g760a", 0x3e),
+	}, {
+		I2C_BOARD_INFO("lm75", 0x48),
+	}, {
+		I2C_BOARD_INFO("m41t80", 0x68),
+	},
+};
+
+/*
+ * On the DNS-323 C1 the following devices are attached via I2C:
+ *
+ *  i2c addr | chip        | description
+ *  0x48     | GMT G751-2f | temp. sensor and therm. watchdog (LM75 compatible)
+ *  0x68     | ST M41T80   | RTC w/ alarm
+ */
+static struct i2c_board_info __initdata dns323c_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("lm75", 0x48),
+	}, {
+		I2C_BOARD_INFO("m41t80", 0x68),
+	},
+};
+
+/* DNS-323 rev. A specific power off method */
+static void dns323a_power_off(void)
+{
+	pr_info("DNS-323: Triggering power-off...\n");
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+}
+
+/* DNS-323 rev B specific power off method */
+static void dns323b_power_off(void)
+{
+	pr_info("DNS-323: Triggering power-off...\n");
+	/* Pin has to be changed to 1 and back to 0 to do actual power off. */
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+	mdelay(100);
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
+}
+
+/* DNS-323 rev. C specific power off method */
+static void dns323c_power_off(void)
+{
+	pr_info("DNS-323: Triggering power-off...\n");
+	gpio_set_value(DNS323C_GPIO_POWER_OFF, 1);
+}
+
+static int dns323c_phy_fixup(struct phy_device *phy)
+{
+	phy->dev_flags |= MARVELL_PHY_M1118_DNS323_LEDS;
+
+	return 0;
+}
+
+static int __init dns323_identify_rev(void)
+{
+	u32 dev, rev, i, reg;
+
+	pr_debug("DNS-323: Identifying board ... \n");
+
+	/* Rev A1 has a 5181 */
+	orion5x_pcie_id(&dev, &rev);
+	if (dev == MV88F5181_DEV_ID) {
+		pr_debug("DNS-323: 5181 found, board is A1\n");
+		return DNS323_REV_A1;
+	}
+	pr_debug("DNS-323: 5182 found, board is B1 or C1, checking PHY...\n");
+
+	/* Rev B1 and C1 both have 5182, let's poke at the eth PHY. This is
+	 * a bit gross but we want to do that without links into the eth
+	 * driver so let's poke at it directly. We default to rev B1 in
+	 * case the accesses fail
+	 */
+
+#define ETH_SMI_REG		(ORION5X_ETH_VIRT_BASE + 0x2000 + 0x004)
+#define  SMI_BUSY		0x10000000
+#define  SMI_READ_VALID		0x08000000
+#define  SMI_OPCODE_READ	0x04000000
+#define  SMI_OPCODE_WRITE	0x00000000
+
+	for (i = 0; i < 1000; i++) {
+		reg = readl(ETH_SMI_REG);
+		if (!(reg & SMI_BUSY))
+			break;
+	}
+	if (i >= 1000) {
+		pr_warn("DNS-323: Timeout accessing PHY, assuming rev B1\n");
+		return DNS323_REV_B1;
+	}
+	writel((3 << 21)	/* phy ID reg */ |
+	       (8 << 16)	/* phy addr */ |
+	       SMI_OPCODE_READ, ETH_SMI_REG);
+	for (i = 0; i < 1000; i++) {
+		reg = readl(ETH_SMI_REG);
+		if (reg & SMI_READ_VALID)
+			break;
+	}
+	if (i >= 1000) {
+		pr_warn("DNS-323: Timeout reading PHY, assuming rev B1\n");
+		return DNS323_REV_B1;
+	}
+	pr_debug("DNS-323: Ethernet PHY ID 0x%x\n", reg & 0xffff);
+
+	/* Note: the Marvell tools mask the ID with 0x3f0 before comparison
+	 * but I don't see that making a difference here, at least with
+	 * any known Marvell PHY ID
+	 */
+	switch(reg & 0xfff0) {
+	case 0x0cc0: /* MV88E1111 */
+		return DNS323_REV_B1;
+	case 0x0e10: /* MV88E1118 */
+		return DNS323_REV_C1;
+	default:
+		pr_warn("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",
+			reg & 0xffff);
+	}
+	return DNS323_REV_B1;
+}
+
+static void __init dns323_init(void)
+{
+	/* Setup basic Orion functions. Need to be called early. */
+	orion5x_init();
+
+	/* Identify revision */
+	system_rev = dns323_identify_rev();
+	pr_info("DNS-323: Identified HW revision %c1\n", 'A' + system_rev);
+
+	/* Just to be tricky, the 5182 has a completely different
+	 * set of MPP modes to the 5181.
+	 */
+	switch(system_rev) {
+	case DNS323_REV_A1:
+		orion5x_mpp_conf(dns323a_mpp_modes);
+		writel(0, MPP_DEV_CTRL);		/* DEV_D[31:16] */
+		break;
+	case DNS323_REV_B1:
+		orion5x_mpp_conf(dns323b_mpp_modes);
+		break;
+	case DNS323_REV_C1:
+		orion5x_mpp_conf(dns323c_mpp_modes);
+		break;
+	}
+
+	/* setup flash mapping
+	 * CS3 holds a 8 MB Spansion S29GL064M90TFIR4
+	 */
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    DNS323_NOR_BOOT_BASE,
+				    DNS323_NOR_BOOT_SIZE);
+	platform_device_register(&dns323_nor_flash);
+
+	/* Sort out LEDs, Buttons and i2c devices */
+	switch(system_rev) {
+	case DNS323_REV_A1:
+		/* The 5181 power LED is active low and requires
+		 * DNS323_GPIO_LED_POWER1 to also be low.
+		 */
+		 dns323ab_leds[0].active_low = 1;
+		 gpio_request(DNS323_GPIO_LED_POWER1, "Power Led Enable");
+		 gpio_direction_output(DNS323_GPIO_LED_POWER1, 0);
+		fallthrough;
+	case DNS323_REV_B1:
+		i2c_register_board_info(0, dns323ab_i2c_devices,
+				ARRAY_SIZE(dns323ab_i2c_devices));
+		break;
+	case DNS323_REV_C1:
+		/* Hookup LEDs & Buttons */
+		dns323_gpio_leds.dev.platform_data = &dns323c_led_data;
+		dns323_button_device.dev.platform_data = &dns323c_button_data;
+
+		/* Hookup i2c devices and fan driver */
+		i2c_register_board_info(0, dns323c_i2c_devices,
+				ARRAY_SIZE(dns323c_i2c_devices));
+		platform_device_register_simple("dns323c-fan", 0, NULL, 0);
+
+		/* Register fixup for the PHY LEDs */
+		if (!IS_BUILTIN(CONFIG_PHYLIB))
+			break;
+		phy_register_fixup_for_uid(MARVELL_PHY_ID_88E1118,
+					   MARVELL_PHY_ID_MASK,
+					   dns323c_phy_fixup);
+	}
+
+	platform_device_register(&dns323_gpio_leds);
+	platform_device_register(&dns323_button_device);
+
+	/*
+	 * Configure peripherals.
+	 */
+	if (dns323_read_mac_addr() < 0)
+		printk("DNS-323: Failed to read MAC address\n");
+	orion5x_ehci0_init();
+	orion5x_eth_init(&dns323_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+
+	/* Remaining GPIOs */
+	switch(system_rev) {
+	case DNS323_REV_A1:
+		/* Poweroff GPIO */
+		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+			pr_err("DNS-323: failed to setup power-off GPIO\n");
+		pm_power_off = dns323a_power_off;
+		break;
+	case DNS323_REV_B1:
+		/* 5182 built-in SATA init */
+		orion5x_sata_init(&dns323_sata_data);
+
+		/* The DNS323 rev B1 has flag to indicate the system is up.
+		 * Without this flag set, power LED will flash and cannot be
+		 * controlled via leds-gpio.
+		 */
+		if (gpio_request(DNS323_GPIO_SYSTEM_UP, "SYS_READY") == 0)
+			gpio_direction_output(DNS323_GPIO_SYSTEM_UP, 1);
+
+		/* Poweroff GPIO */
+		if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+		    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
+			pr_err("DNS-323: failed to setup power-off GPIO\n");
+		pm_power_off = dns323b_power_off;
+		break;
+	case DNS323_REV_C1:
+		/* 5182 built-in SATA init */
+		orion5x_sata_init(&dns323_sata_data);
+
+		/* Poweroff GPIO */
+		if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+		    gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
+			pr_err("DNS-323: failed to setup power-off GPIO\n");
+		pm_power_off = dns323c_power_off;
+
+		/* Now, -this- should theoretically be done by the sata_mv driver
+		 * once I figure out what's going on there. Maybe the behaviour
+		 * of the LEDs should be somewhat passed via the platform_data.
+		 * for now, just whack the register and make the LEDs happy
+		 *
+		 * Note: AFAIK, rev B1 needs the same treatment but I'll let
+		 * somebody else test it.
+		 */
+		writel(0x5, ORION5X_SATA_VIRT_BASE + 0x2c);
+		break;
+	}
+}
+
+/* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
+MACHINE_START(DNS323, "D-Link DNS-323")
+	/* Maintainer: Herbert Valerio Riedel <hvr@gnu.org> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= dns323_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c
new file mode 100644
index 000000000..e17727e53
--- /dev/null
+++ b/arch/arm/mach-orion5x/irq.c
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/irq.c
+ *
+ * Core IRQ functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <plat/orion-gpio.h>
+#include <plat/irq.h>
+#include <asm/exception.h>
+#include "bridge-regs.h"
+#include "common.h"
+
+static int __initdata gpio0_irqs[4] = {
+	IRQ_ORION5X_GPIO_0_7,
+	IRQ_ORION5X_GPIO_8_15,
+	IRQ_ORION5X_GPIO_16_23,
+	IRQ_ORION5X_GPIO_24_31,
+};
+
+static asmlinkage void
+__exception_irq_entry orion5x_legacy_handle_irq(struct pt_regs *regs)
+{
+	u32 stat;
+
+	stat = readl_relaxed(MAIN_IRQ_CAUSE);
+	stat &= readl_relaxed(MAIN_IRQ_MASK);
+	if (stat) {
+		unsigned int hwirq = 1 + __fls(stat);
+		handle_IRQ(hwirq, regs);
+		return;
+	}
+}
+
+void __init orion5x_init_irq(void)
+{
+	orion_irq_init(1, MAIN_IRQ_MASK);
+
+	set_handle_irq(orion5x_legacy_handle_irq);
+
+	/*
+	 * Initialize gpiolib for GPIOs 0-31.
+	 */
+	orion_gpio_init(0, 32, GPIO_VIRT_BASE, 0,
+			IRQ_ORION5X_GPIO_START, gpio0_irqs);
+}
diff --git a/arch/arm/mach-orion5x/irqs.h b/arch/arm/mach-orion5x/irqs.h
new file mode 100644
index 000000000..a70c47cfa
--- /dev/null
+++ b/arch/arm/mach-orion5x/irqs.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * IRQ definitions for Orion SoC
+ *
+ *  Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * Orion Main Interrupt Controller
+ */
+#define IRQ_ORION5X_BRIDGE		(1 + 0)
+#define IRQ_ORION5X_DOORBELL_H2C	(1 + 1)
+#define IRQ_ORION5X_DOORBELL_C2H	(1 + 2)
+#define IRQ_ORION5X_UART0		(1 + 3)
+#define IRQ_ORION5X_UART1		(1 + 4)
+#define IRQ_ORION5X_I2C			(1 + 5)
+#define IRQ_ORION5X_GPIO_0_7		(1 + 6)
+#define IRQ_ORION5X_GPIO_8_15		(1 + 7)
+#define IRQ_ORION5X_GPIO_16_23		(1 + 8)
+#define IRQ_ORION5X_GPIO_24_31		(1 + 9)
+#define IRQ_ORION5X_PCIE0_ERR		(1 + 10)
+#define IRQ_ORION5X_PCIE0_INT		(1 + 11)
+#define IRQ_ORION5X_USB1_CTRL		(1 + 12)
+#define IRQ_ORION5X_DEV_BUS_ERR		(1 + 14)
+#define IRQ_ORION5X_PCI_ERR		(1 + 15)
+#define IRQ_ORION5X_USB_BR_ERR		(1 + 16)
+#define IRQ_ORION5X_USB0_CTRL		(1 + 17)
+#define IRQ_ORION5X_ETH_RX		(1 + 18)
+#define IRQ_ORION5X_ETH_TX		(1 + 19)
+#define IRQ_ORION5X_ETH_MISC		(1 + 20)
+#define IRQ_ORION5X_ETH_SUM		(1 + 21)
+#define IRQ_ORION5X_ETH_ERR		(1 + 22)
+#define IRQ_ORION5X_IDMA_ERR		(1 + 23)
+#define IRQ_ORION5X_IDMA_0		(1 + 24)
+#define IRQ_ORION5X_IDMA_1		(1 + 25)
+#define IRQ_ORION5X_IDMA_2		(1 + 26)
+#define IRQ_ORION5X_IDMA_3		(1 + 27)
+#define IRQ_ORION5X_CESA		(1 + 28)
+#define IRQ_ORION5X_SATA		(1 + 29)
+#define IRQ_ORION5X_XOR0		(1 + 30)
+#define IRQ_ORION5X_XOR1		(1 + 31)
+
+/*
+ * Orion General Purpose Pins
+ */
+#define IRQ_ORION5X_GPIO_START	33
+#define NR_GPIO_IRQS		32
+
+#define ORION5X_NR_IRQS		(IRQ_ORION5X_GPIO_START + NR_GPIO_IRQS)
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
new file mode 100644
index 000000000..acba06618
--- /dev/null
+++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/kurobox_pro-setup.c
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * KUROBOX-PRO Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define KUROBOX_PRO_NOR_BOOT_BASE	0xf4000000
+#define KUROBOX_PRO_NOR_BOOT_SIZE	SZ_256K
+
+/*
+ * 256M NAND flash on Device bus chip select 1
+ */
+
+#define KUROBOX_PRO_NAND_BASE		0xfc000000
+#define KUROBOX_PRO_NAND_SIZE		SZ_2M
+
+/*****************************************************************************
+ * 256MB NAND Flash on Device bus CS0
+ ****************************************************************************/
+
+static struct mtd_partition kurobox_pro_nand_parts[] = {
+	{
+		.name	= "uImage",
+		.offset	= 0,
+		.size	= SZ_4M,
+	}, {
+		.name	= "rootfs",
+		.offset	= SZ_4M,
+		.size	= SZ_64M,
+	}, {
+		.name	= "extra",
+		.offset	= SZ_4M + SZ_64M,
+		.size	= SZ_256M - (SZ_4M + SZ_64M),
+	},
+};
+
+static struct resource kurobox_pro_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= KUROBOX_PRO_NAND_BASE,
+	.end		= KUROBOX_PRO_NAND_BASE + KUROBOX_PRO_NAND_SIZE - 1,
+};
+
+static struct orion_nand_data kurobox_pro_nand_data = {
+	.parts		= kurobox_pro_nand_parts,
+	.nr_parts	= ARRAY_SIZE(kurobox_pro_nand_parts),
+	.cle		= 0,
+	.ale		= 1,
+	.width		= 8,
+};
+
+static struct platform_device kurobox_pro_nand_flash = {
+	.name		= "orion_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &kurobox_pro_nand_data,
+	},
+	.resource	= &kurobox_pro_nand_resource,
+	.num_resources	= 1,
+};
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data kurobox_pro_nor_flash_data = {
+	.width		= 1,
+};
+
+static struct resource kurobox_pro_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= KUROBOX_PRO_NOR_BOOT_BASE,
+	.end			= KUROBOX_PRO_NOR_BOOT_BASE + KUROBOX_PRO_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device kurobox_pro_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &kurobox_pro_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &kurobox_pro_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static int __init kurobox_pro_pci_map_irq(const struct pci_dev *dev, u8 slot,
+	u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * PCI isn't used on the Kuro
+	 */
+	return -1;
+}
+
+static struct hw_pci kurobox_pro_pci __initdata = {
+	.nr_controllers	= 2,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= kurobox_pro_pci_map_irq,
+};
+
+static int __init kurobox_pro_pci_init(void)
+{
+	if (machine_is_kurobox_pro()) {
+		orion5x_pci_disable();
+		pci_common_init(&kurobox_pro_pci);
+	}
+
+	return 0;
+}
+
+subsys_initcall(kurobox_pro_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data kurobox_pro_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata kurobox_pro_i2c_rtc = {
+	I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data kurobox_pro_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * Kurobox Pro specific power off method via UART1-attached microcontroller
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+static int kurobox_pro_miconread(unsigned char *buf, int count)
+{
+	int i;
+	int timeout;
+
+	for (i = 0; i < count; i++) {
+		timeout = 10;
+
+		while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
+			if (--timeout == 0)
+				break;
+			udelay(1000);
+		}
+
+		if (timeout == 0)
+			break;
+		buf[i] = readl(UART1_REG(RX));
+	}
+
+	/* return read bytes */
+	return i;
+}
+
+static int kurobox_pro_miconwrite(const unsigned char *buf, int count)
+{
+	int i = 0;
+
+	while (count--) {
+		while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
+			barrier();
+		writel(buf[i++], UART1_REG(TX));
+	}
+
+	return 0;
+}
+
+static int kurobox_pro_miconsend(const unsigned char *data, int count)
+{
+	int i;
+	unsigned char checksum = 0;
+	unsigned char recv_buf[40];
+	unsigned char send_buf[40];
+	unsigned char correct_ack[3];
+	int retry = 2;
+
+	/* Generate checksum */
+	for (i = 0; i < count; i++)
+		checksum -=  data[i];
+
+	do {
+		/* Send data */
+		kurobox_pro_miconwrite(data, count);
+
+		/* send checksum */
+		kurobox_pro_miconwrite(&checksum, 1);
+
+		if (kurobox_pro_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
+			printk(KERN_ERR ">%s: receive failed.\n", __func__);
+
+			/* send preamble to clear the receive buffer */
+			memset(&send_buf, 0xff, sizeof(send_buf));
+			kurobox_pro_miconwrite(send_buf, sizeof(send_buf));
+
+			/* make dummy reads */
+			mdelay(100);
+			kurobox_pro_miconread(recv_buf, sizeof(recv_buf));
+		} else {
+			/* Generate expected ack */
+			correct_ack[0] = 0x01;
+			correct_ack[1] = data[1];
+			correct_ack[2] = 0x00;
+
+			/* checksum Check */
+			if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
+			     recv_buf[3]) & 0xFF) {
+				printk(KERN_ERR ">%s: Checksum Error : "
+					"Received data[%02x, %02x, %02x, %02x]"
+					"\n", __func__, recv_buf[0],
+					recv_buf[1], recv_buf[2], recv_buf[3]);
+			} else {
+				/* Check Received Data */
+				if (correct_ack[0] == recv_buf[0] &&
+				    correct_ack[1] == recv_buf[1] &&
+				    correct_ack[2] == recv_buf[2]) {
+					/* Interval for next command */
+					mdelay(10);
+
+					/* Receive ACK */
+					return 0;
+				}
+			}
+			/* Received NAK or illegal Data */
+			printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
+					"Received\n", __func__);
+		}
+	} while (retry--);
+
+	/* Interval for next command */
+	mdelay(10);
+
+	return -1;
+}
+
+static void kurobox_pro_power_off(void)
+{
+	const unsigned char watchdogkill[]	= {0x01, 0x35, 0x00};
+	const unsigned char shutdownwait[]	= {0x00, 0x0c};
+	const unsigned char poweroff[]		= {0x00, 0x06};
+	/* 38400 baud divisor */
+	const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack uart1 and reset into sane state (38400,8n1,even parity) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x1b, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x07, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* Send the commands to shutdown the Kurobox Pro */
+	kurobox_pro_miconsend(watchdogkill, sizeof(watchdogkill)) ;
+	kurobox_pro_miconsend(shutdownwait, sizeof(shutdownwait)) ;
+	kurobox_pro_miconsend(poweroff, sizeof(poweroff));
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int kurobox_pro_mpp_modes[] __initdata = {
+	MPP0_UNUSED,
+	MPP1_UNUSED,
+	MPP2_GPIO,		/* GPIO Micon */
+	MPP3_GPIO,		/* GPIO Rtc */
+	MPP4_UNUSED,
+	MPP5_UNUSED,
+	MPP6_NAND,		/* NAND Flash REn */
+	MPP7_NAND,		/* NAND Flash WEn */
+	MPP8_UNUSED,
+	MPP9_UNUSED,
+	MPP10_UNUSED,
+	MPP11_UNUSED,
+	MPP12_SATA_LED,		/* SATA 0 presence */
+	MPP13_SATA_LED,		/* SATA 1 presence */
+	MPP14_SATA_LED,		/* SATA 0 active */
+	MPP15_SATA_LED,		/* SATA 1 active */
+	MPP16_UART,		/* UART1 RXD */
+	MPP17_UART,		/* UART1 TXD */
+	MPP18_UART,		/* UART1 CTSn */
+	MPP19_UART,		/* UART1 RTSn */
+	0,
+};
+
+static void __init kurobox_pro_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(kurobox_pro_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&kurobox_pro_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&kurobox_pro_sata_data);
+	orion5x_uart0_init();
+	orion5x_uart1_init();
+	orion5x_xor_init();
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    KUROBOX_PRO_NOR_BOOT_BASE,
+				    KUROBOX_PRO_NOR_BOOT_SIZE);
+	platform_device_register(&kurobox_pro_nor_flash);
+
+	if (machine_is_kurobox_pro()) {
+		mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(0),
+					    ORION_MBUS_DEVBUS_ATTR(0),
+					    KUROBOX_PRO_NAND_BASE,
+					    KUROBOX_PRO_NAND_SIZE);
+		platform_device_register(&kurobox_pro_nand_flash);
+	}
+
+	i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
+
+	/* register Kurobox Pro specific power-off method */
+	pm_power_off = kurobox_pro_power_off;
+}
+
+#ifdef CONFIG_MACH_KUROBOX_PRO
+MACHINE_START(KUROBOX_PRO, "Buffalo/Revogear Kurobox Pro")
+	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= kurobox_pro_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_LINKSTATION_PRO
+MACHINE_START(LINKSTATION_PRO, "Buffalo Linkstation Pro/Live")
+	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= kurobox_pro_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-orion5x/ls_hgl-setup.c b/arch/arm/mach-orion5x/ls_hgl-setup.c
new file mode 100644
index 000000000..af07f6174
--- /dev/null
+++ b/arch/arm/mach-orion5x/ls_hgl-setup.c
@@ -0,0 +1,275 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/ls_hgl-setup.c
+ *
+ * Maintainer: Zhu Qingsen <zhuqs@cn.fujitsu.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * Linkstation LS-HGL Info
+ ****************************************************************************/
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define LS_HGL_NOR_BOOT_BASE	0xf4000000
+#define LS_HGL_NOR_BOOT_SIZE	SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data ls_hgl_nor_flash_data = {
+	.width		= 1,
+};
+
+static struct resource ls_hgl_nor_flash_resource = {
+	.flags	= IORESOURCE_MEM,
+	.start	= LS_HGL_NOR_BOOT_BASE,
+	.end	= LS_HGL_NOR_BOOT_BASE + LS_HGL_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device ls_hgl_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &ls_hgl_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &ls_hgl_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data ls_hgl_eth_data = {
+	.phy_addr	= 8,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+static struct i2c_board_info __initdata ls_hgl_i2c_rtc = {
+	I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_LED_ALARM   2
+#define LS_HGL_GPIO_LED_INFO    3
+#define LS_HGL_GPIO_LED_FUNC    17
+#define LS_HGL_GPIO_LED_PWR     0
+
+
+static struct gpio_led ls_hgl_led_pins[] = {
+	{
+		.name	   = "alarm:red",
+		.gpio	   = LS_HGL_GPIO_LED_ALARM,
+		.active_low     = 1,
+	}, {
+		.name	   = "info:amber",
+		.gpio	   = LS_HGL_GPIO_LED_INFO,
+		.active_low     = 1,
+	}, {
+		.name	   = "func:blue:top",
+		.gpio	   = LS_HGL_GPIO_LED_FUNC,
+		.active_low     = 1,
+	}, {
+		.name	   = "power:blue:bottom",
+		.gpio	   = LS_HGL_GPIO_LED_PWR,
+	},
+};
+
+static struct gpio_led_platform_data ls_hgl_led_data = {
+	.leds	   = ls_hgl_led_pins,
+	.num_leds       = ARRAY_SIZE(ls_hgl_led_pins),
+};
+
+static struct platform_device ls_hgl_leds = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &ls_hgl_led_data,
+	},
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ ****************************************************************************/
+#define LS_HGL_GPIO_KEY_FUNC       15
+#define LS_HGL_GPIO_KEY_POWER      8
+#define LS_HGL_GPIO_KEY_AUTOPOWER  10
+
+#define LS_HGL_SW_POWER     0x00
+#define LS_HGL_SW_AUTOPOWER 0x01
+
+static struct gpio_keys_button ls_hgl_buttons[] = {
+	{
+		.code	   = KEY_OPTION,
+		.gpio	   = LS_HGL_GPIO_KEY_FUNC,
+		.desc	   = "Function Button",
+		.active_low     = 1,
+	}, {
+		.type		= EV_SW,
+		.code	   = LS_HGL_SW_POWER,
+		.gpio	   = LS_HGL_GPIO_KEY_POWER,
+		.desc	   = "Power-on Switch",
+		.active_low     = 1,
+	}, {
+		.type		= EV_SW,
+		.code	   = LS_HGL_SW_AUTOPOWER,
+		.gpio	   = LS_HGL_GPIO_KEY_AUTOPOWER,
+		.desc	   = "Power-auto Switch",
+		.active_low     = 1,
+	},
+};
+
+static struct gpio_keys_platform_data ls_hgl_button_data = {
+	.buttons	= ls_hgl_buttons,
+	.nbuttons       = ARRAY_SIZE(ls_hgl_buttons),
+};
+
+static struct platform_device ls_hgl_button_device = {
+	.name	   = "gpio-keys",
+	.id	     = -1,
+	.num_resources  = 0,
+	.dev	    = {
+		.platform_data  = &ls_hgl_button_data,
+	},
+};
+
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ls_hgl_sata_data = {
+	.n_ports	= 2,
+};
+
+
+/*****************************************************************************
+ * Linkstation LS-HGL specific power off method: reboot
+ ****************************************************************************/
+/*
+ * On the Linkstation LS-HGL, the shutdown process is following:
+ * - Userland monitors key events until the power switch goes to off position
+ * - The board reboots
+ * - U-boot starts and goes into an idle mode waiting for the user
+ *   to move the switch to ON position
+ */
+
+static void ls_hgl_power_off(void)
+{
+	orion5x_restart(REBOOT_HARD, NULL);
+}
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+#define LS_HGL_GPIO_USB_POWER	9
+#define LS_HGL_GPIO_AUTO_POWER	10
+#define LS_HGL_GPIO_POWER	    8
+
+#define LS_HGL_GPIO_HDD_POWER	1
+
+static unsigned int ls_hgl_mpp_modes[] __initdata = {
+	MPP0_GPIO, /* LED_PWR */
+	MPP1_GPIO, /* HDD_PWR */
+	MPP2_GPIO, /* LED_ALARM */
+	MPP3_GPIO, /* LED_INFO */
+	MPP4_UNUSED,
+	MPP5_UNUSED,
+	MPP6_GPIO, /* FAN_LCK */
+	MPP7_GPIO, /* INIT */
+	MPP8_GPIO, /* POWER */
+	MPP9_GPIO, /* USB_PWR */
+	MPP10_GPIO, /* AUTO_POWER */
+	MPP11_UNUSED, /* LED_ETH (dummy) */
+	MPP12_UNUSED,
+	MPP13_UNUSED,
+	MPP14_UNUSED,
+	MPP15_GPIO, /* FUNC */
+	MPP16_UNUSED,
+	MPP17_GPIO, /* LED_FUNC */
+	MPP18_UNUSED,
+	MPP19_UNUSED,
+	0,
+};
+
+static void __init ls_hgl_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(ls_hgl_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&ls_hgl_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&ls_hgl_sata_data);
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    LS_HGL_NOR_BOOT_BASE,
+				    LS_HGL_NOR_BOOT_SIZE);
+	platform_device_register(&ls_hgl_nor_flash);
+
+	platform_device_register(&ls_hgl_button_device);
+
+	platform_device_register(&ls_hgl_leds);
+
+	i2c_register_board_info(0, &ls_hgl_i2c_rtc, 1);
+
+	/* enable USB power */
+	gpio_set_value(LS_HGL_GPIO_USB_POWER, 1);
+
+	/* register power-off method */
+	pm_power_off = ls_hgl_power_off;
+
+	pr_info("%s: finished\n", __func__);
+}
+
+MACHINE_START(LINKSTATION_LS_HGL, "Buffalo Linkstation LS-HGL")
+	/* Maintainer: Zhu Qingsen <zhuqs@cn.fujistu.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= ls_hgl_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c
new file mode 100644
index 000000000..b9855dce6
--- /dev/null
+++ b/arch/arm/mach-orion5x/mpp.c
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/mpp.c
+ *
+ * MPP functions for Marvell Orion 5x SoCs
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <plat/mpp.h>
+#include "orion5x.h"
+#include "mpp.h"
+#include "common.h"
+
+static unsigned int __init orion5x_variant(void)
+{
+	u32 dev;
+	u32 rev;
+
+	orion5x_pcie_id(&dev, &rev);
+
+	if (dev == MV88F5181_DEV_ID)
+		return MPP_F5181_MASK;
+
+	if (dev == MV88F5182_DEV_ID)
+		return MPP_F5182_MASK;
+
+	if (dev == MV88F5281_DEV_ID)
+		return MPP_F5281_MASK;
+
+	printk(KERN_ERR "MPP setup: unknown orion5x variant "
+	       "(dev %#x rev %#x)\n", dev, rev);
+	return 0;
+}
+
+void __init orion5x_mpp_conf(unsigned int *mpp_list)
+{
+	orion_mpp_conf(mpp_list, orion5x_variant(),
+		       MPP_MAX, ORION5X_DEV_BUS_VIRT_BASE);
+}
diff --git a/arch/arm/mach-orion5x/mpp.h b/arch/arm/mach-orion5x/mpp.h
new file mode 100644
index 000000000..be1c78663
--- /dev/null
+++ b/arch/arm/mach-orion5x/mpp.h
@@ -0,0 +1,130 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ARCH_ORION5X_MPP_H
+#define __ARCH_ORION5X_MPP_H
+
+#define MPP(_num, _sel, _in, _out, _F5181l, _F5182, _F5281) ( \
+	/* MPP number */		((_num) & 0xff) | \
+	/* MPP select value */		(((_sel) & 0xf) << 8) | \
+	/* may be input signal */	((!!(_in)) << 12) | \
+	/* may be output signal */	((!!(_out)) << 13) | \
+	/* available on F5181l */	((!!(_F5181l)) << 14) | \
+	/* available on F5182 */	((!!(_F5182)) << 15) | \
+	/* available on F5281 */	((!!(_F5281)) << 16))
+
+				/* num sel  i  o  5181 5182 5281 */
+
+#define MPP_F5181_MASK		MPP(0,  0x0, 0, 0, 1,   0,   0)
+#define MPP_F5182_MASK		MPP(0,  0x0, 0, 0, 0,   1,   0)
+#define MPP_F5281_MASK		MPP(0,  0x0, 0, 0, 0,   0,   1)
+
+#define MPP0_UNUSED	        MPP(0,  0x3, 0, 0, 1,   1,   1)
+#define MPP0_GPIO		MPP(0,  0x3, 1, 1, 1,   1,   1)
+#define MPP0_PCIE_RST_OUTn	MPP(0,  0x0, 0, 0, 1,   1,   1)
+#define MPP0_PCI_ARB            MPP(0,  0x2, 0, 0, 1,   1,   1)
+
+#define MPP1_UNUSED		MPP(1,  0x0, 0, 0, 1,   1,   1)
+#define MPP1_GPIO		MPP(1,  0x0, 1, 1, 1,   1,   1)
+#define MPP1_PCI_ARB            MPP(1,  0x2, 0, 0, 1,   1,   1)
+
+#define MPP2_UNUSED		MPP(2,  0x0, 0, 0, 1,   1,   1)
+#define MPP2_GPIO		MPP(2,  0x0, 1, 1, 1,   1,   1)
+#define MPP2_PCI_ARB            MPP(2,  0x2, 0, 0, 1,   1,   1)
+#define MPP2_PCI_PMEn           MPP(2,  0x3, 0, 0, 1,   1,   1)
+
+#define MPP3_UNUSED		MPP(3,  0x0, 0, 0, 1,   1,   1)
+#define MPP3_GPIO		MPP(3,  0x0, 1, 1, 1,   1,   1)
+#define MPP3_PCI_ARB            MPP(3,  0x2, 0, 0, 1,   1,   1)
+
+#define MPP4_UNUSED		MPP(4,  0x0, 0, 0, 1,   1,   1)
+#define MPP4_GPIO		MPP(4,  0x0, 1, 1, 1,   1,   1)
+#define MPP4_PCI_ARB            MPP(4,  0x2, 0, 0, 1,   1,   1)
+#define MPP4_NAND               MPP(4,  0x4, 0, 0, 0,   1,   1)
+#define MPP4_SATA_LED           MPP(4,  0x5, 0, 0, 0,   1,   0)
+
+#define MPP5_UNUSED		MPP(5,  0x0, 0, 0, 1,   1,   1)
+#define MPP5_GPIO		MPP(5,  0x0, 1, 1, 1,   1,   1)
+#define MPP5_PCI_ARB            MPP(5,  0x2, 0, 0, 1,   1,   1)
+#define MPP5_NAND               MPP(5,  0x4, 0, 0, 0,   1,   1)
+#define MPP5_SATA_LED           MPP(5,  0x5, 0, 0, 0,   1,   0)
+
+#define MPP6_UNUSED		MPP(6,  0x0, 0, 0, 1,   1,   1)
+#define MPP6_GPIO		MPP(6,  0x0, 1, 1, 1,   1,   1)
+#define MPP6_PCI_ARB            MPP(6,  0x2, 0, 0, 1,   1,   1)
+#define MPP6_NAND               MPP(6,  0x4, 0, 0, 0,   1,   1)
+#define MPP6_PCI_CLK            MPP(6,  0x5, 0, 0, 1,   0,   0)
+#define MPP6_SATA_LED           MPP(6,  0x5, 0, 0, 0,   1,   0)
+
+#define MPP7_UNUSED		MPP(7,  0x0, 0, 0, 1,   1,   1)
+#define MPP7_GPIO		MPP(7,  0x0, 1, 1, 1,   1,   1)
+#define MPP7_PCI_ARB            MPP(7,  0x2, 0, 0, 1,   1,   1)
+#define MPP7_NAND               MPP(7,  0x4, 0, 0, 0,   1,   1)
+#define MPP7_PCI_CLK            MPP(7,  0x5, 0, 0, 1,   0,   0)
+#define MPP7_SATA_LED           MPP(7,  0x5, 0, 0, 0,   1,   0)
+
+#define MPP8_UNUSED		MPP(8,  0x0, 0, 0, 1,   1,   1)
+#define MPP8_GPIO		MPP(8,  0x0, 1, 1, 1,   1,   1)
+#define MPP8_GIGE               MPP(8,  0x1, 0, 0, 1,   1,   1)
+
+#define MPP9_UNUSED		MPP(9,  0x0, 0, 0, 1,   1,   1)
+#define MPP9_GPIO		MPP(9,  0x0, 1, 1, 1,   1,   1)
+#define MPP9_GIGE               MPP(9,  0x1, 0, 0, 1,   1,   1)
+
+#define MPP10_UNUSED		MPP(10, 0x0, 0, 0, 1,   1,   1)
+#define MPP10_GPIO		MPP(10, 0x0, 1, 1, 1,   1,   1)
+#define MPP10_GIGE              MPP(10, 0x1, 0, 0, 1,   1,   1)
+
+#define MPP11_UNUSED		MPP(11, 0x0, 0, 0, 1,   1,   1)
+#define MPP11_GPIO		MPP(11, 0x0, 1, 1, 1,   1,   1)
+#define MPP11_GIGE              MPP(11, 0x1, 0, 0, 1,   1,   1)
+
+#define MPP12_UNUSED		MPP(12, 0x0, 0, 0, 1,   1,   1)
+#define MPP12_GPIO		MPP(12, 0x0, 1, 1, 1,   1,   1)
+#define MPP12_GIGE              MPP(12, 0x1, 0, 0, 1,   1,   1)
+#define MPP12_NAND              MPP(12, 0x4, 0, 0, 0,   1,   1)
+#define MPP12_SATA_LED          MPP(12, 0x5, 0, 0, 0,   1,   0)
+
+#define MPP13_UNUSED		MPP(13, 0x0, 0, 0, 1,   1,   1)
+#define MPP13_GPIO		MPP(13, 0x0, 1, 1, 1,   1,   1)
+#define MPP13_GIGE              MPP(13, 0x1, 0, 0, 1,   1,   1)
+#define MPP13_NAND              MPP(13, 0x4, 0, 0, 0,   1,   1)
+#define MPP13_SATA_LED          MPP(13, 0x5, 0, 0, 0,   1,   0)
+
+#define MPP14_UNUSED		MPP(14, 0x0, 0, 0, 1,   1,   1)
+#define MPP14_GPIO		MPP(14, 0x0, 1, 1, 1,   1,   1)
+#define MPP14_GIGE              MPP(14, 0x1, 0, 0, 1,   1,   1)
+#define MPP14_NAND              MPP(14, 0x4, 0, 0, 0,   1,   1)
+#define MPP14_SATA_LED          MPP(14, 0x5, 0, 0, 0,   1,   0)
+
+#define MPP15_UNUSED		MPP(15, 0x0, 0, 0, 1,   1,   1)
+#define MPP15_GPIO		MPP(15, 0x0, 1, 1, 1,   1,   1)
+#define MPP15_GIGE              MPP(15, 0x1, 0, 0, 1,   1,   1)
+#define MPP15_NAND              MPP(15, 0x4, 0, 0, 0,   1,   1)
+#define MPP15_SATA_LED          MPP(15, 0x5, 0, 0, 0,   1,   0)
+
+#define MPP16_UNUSED		MPP(16, 0x0, 0, 0, 1,   1,   1)
+#define MPP16_GPIO		MPP(16, 0x5, 1, 1, 0,   1,   0)
+#define MPP16_GIGE              MPP(16, 0x1, 0, 0, 1,   1,   1)
+#define MPP16_NAND              MPP(16, 0x4, 0, 0, 0,   1,   1)
+#define MPP16_UART              MPP(16, 0x0, 0, 0, 0,   1,   1)
+
+#define MPP17_UNUSED		MPP(17, 0x0, 0, 0, 1,   1,   1)
+#define MPP17_GPIO		MPP(17, 0x5, 1, 1, 0,   1,   0)
+#define MPP17_GIGE              MPP(17, 0x1, 0, 0, 1,   1,   1)
+#define MPP17_NAND              MPP(17, 0x4, 0, 0, 0,   1,   1)
+#define MPP17_UART              MPP(17, 0x0, 0, 0, 0,   1,   1)
+
+#define MPP18_UNUSED		MPP(18, 0x0, 0, 0, 1,   1,   1)
+#define MPP18_GPIO		MPP(18, 0x5, 1, 1, 0,   1,   0)
+#define MPP18_GIGE              MPP(18, 0x1, 0, 0, 1,   1,   1)
+#define MPP18_UART              MPP(18, 0x0, 0, 0, 0,   1,   1)
+
+#define MPP19_UNUSED		MPP(19, 0x0, 0, 0, 1,   1,   1)
+#define MPP19_GPIO		MPP(19, 0x5, 1, 1, 0,   1,   0)
+#define MPP19_GIGE              MPP(19, 0x1, 0, 0, 1,   1,   1)
+#define MPP19_UART              MPP(19, 0x0, 0, 0, 0,   1,   1)
+
+#define MPP_MAX			19
+
+void orion5x_mpp_conf(unsigned int *mpp_list);
+
+#endif
diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
new file mode 100644
index 000000000..2bf8ec75e
--- /dev/null
+++ b/arch/arm/mach-orion5x/mv2120-setup.c
@@ -0,0 +1,243 @@
+/*
+ * Copyright (C) 2007 Herbert Valerio Riedel <hvr@gnu.org>
+ * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+
+#define MV2120_NOR_BOOT_BASE	0xf4000000
+#define MV2120_NOR_BOOT_SIZE	SZ_512K
+
+#define MV2120_GPIO_RTC_IRQ	3
+#define MV2120_GPIO_KEY_RESET	17
+#define MV2120_GPIO_KEY_POWER	18
+#define MV2120_GPIO_POWER_OFF	19
+
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data mv2120_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv_sata_platform_data mv2120_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct mtd_partition mv2120_partitions[] = {
+	{
+		.name	= "firmware",
+		.size	= 0x00080000,
+		.offset	= 0,
+	},
+};
+
+static struct physmap_flash_data mv2120_nor_flash_data = {
+	.width		= 1,
+	.parts		= mv2120_partitions,
+	.nr_parts	= ARRAY_SIZE(mv2120_partitions)
+};
+
+static struct resource mv2120_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= MV2120_NOR_BOOT_BASE,
+	.end		= MV2120_NOR_BOOT_BASE + MV2120_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device mv2120_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &mv2120_nor_flash_data,
+	},
+	.resource	= &mv2120_nor_flash_resource,
+	.num_resources	= 1,
+};
+
+static struct gpio_keys_button mv2120_buttons[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= MV2120_GPIO_KEY_RESET,
+		.desc		= "reset",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_POWER,
+		.gpio		= MV2120_GPIO_KEY_POWER,
+		.desc		= "power",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data mv2120_button_data = {
+	.buttons	= mv2120_buttons,
+	.nbuttons	= ARRAY_SIZE(mv2120_buttons),
+};
+
+static struct platform_device mv2120_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &mv2120_button_data,
+	},
+};
+
+
+/****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int mv2120_mpp_modes[] __initdata = {
+	MPP0_GPIO,		/* Sys status LED */
+	MPP1_GPIO,		/* Sys error LED */
+	MPP2_GPIO,		/* OverTemp interrupt */
+	MPP3_GPIO,		/* RTC interrupt */
+	MPP4_GPIO,		/* V_LED 5V */
+	MPP5_GPIO,		/* V_LED 3.3V */
+	MPP6_UNUSED,
+	MPP7_UNUSED,
+	MPP8_GPIO,		/* SATA 0 fail LED */
+	MPP9_GPIO,		/* SATA 1 fail LED */
+	MPP10_UNUSED,
+	MPP11_UNUSED,
+	MPP12_SATA_LED,		/* SATA 0 presence */
+	MPP13_SATA_LED,		/* SATA 1 presence */
+	MPP14_SATA_LED,		/* SATA 0 active */
+	MPP15_SATA_LED,		/* SATA 1 active */
+	MPP16_UNUSED,
+	MPP17_GPIO,		/* Reset button */
+	MPP18_GPIO,		/* Power button */
+	MPP19_GPIO,		/* Power off */
+	0,
+};
+
+static struct i2c_board_info __initdata mv2120_i2c_rtc = {
+	I2C_BOARD_INFO("pcf8563", 0x51),
+	.irq	= 0,
+};
+
+static struct gpio_led mv2120_led_pins[] = {
+	{
+		.name			= "mv2120:blue:health",
+		.gpio			= 0,
+	},
+	{
+		.name			= "mv2120:red:health",
+		.gpio			= 1,
+	},
+	{
+		.name			= "mv2120:led:bright",
+		.gpio			= 4,
+		.default_trigger	= "default-on",
+	},
+	{
+		.name			= "mv2120:led:dimmed",
+		.gpio			= 5,
+	},
+	{
+		.name			= "mv2120:red:sata0",
+		.gpio			= 8,
+		.active_low		= 1,
+	},
+	{
+		.name			= "mv2120:red:sata1",
+		.gpio			= 9,
+		.active_low		= 1,
+	},
+
+};
+
+static struct gpio_led_platform_data mv2120_led_data = {
+	.leds		= mv2120_led_pins,
+	.num_leds	= ARRAY_SIZE(mv2120_led_pins),
+};
+
+static struct platform_device mv2120_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &mv2120_led_data,
+	}
+};
+
+static void mv2120_power_off(void)
+{
+	pr_info("%s: triggering power-off...\n", __func__);
+	gpio_set_value(MV2120_GPIO_POWER_OFF, 0);
+}
+
+static void __init mv2120_init(void)
+{
+	/* Setup basic Orion functions. Need to be called early. */
+	orion5x_init();
+
+	orion5x_mpp_conf(mv2120_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&mv2120_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&mv2120_sata_data);
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    MV2120_NOR_BOOT_BASE,
+				    MV2120_NOR_BOOT_SIZE);
+	platform_device_register(&mv2120_nor_flash);
+
+	platform_device_register(&mv2120_button_device);
+
+	if (gpio_request(MV2120_GPIO_RTC_IRQ, "rtc") == 0) {
+		if (gpio_direction_input(MV2120_GPIO_RTC_IRQ) == 0)
+			mv2120_i2c_rtc.irq = gpio_to_irq(MV2120_GPIO_RTC_IRQ);
+		else
+			gpio_free(MV2120_GPIO_RTC_IRQ);
+	}
+	i2c_register_board_info(0, &mv2120_i2c_rtc, 1);
+	platform_device_register(&mv2120_leds);
+
+	/* register mv2120 specific power-off method */
+	if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
+	    gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
+		pr_err("mv2120: failed to setup power-off GPIO\n");
+	pm_power_off = mv2120_power_off;
+}
+
+/* Warning: HP uses a wrong mach-type (=526) in their bootloader */
+MACHINE_START(MV2120, "HP Media Vault mv2120")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= mv2120_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
new file mode 100644
index 000000000..695cc683c
--- /dev/null
+++ b/arch/arm/mach-orion5x/net2big-setup.c
@@ -0,0 +1,431 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/net2big-setup.c
+ *
+ * LaCie 2Big Network NAS setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <plat/orion-gpio.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * LaCie 2Big Network Info
+ ****************************************************************************/
+
+/*
+ * 512KB NOR flash Device bus boot chip select
+ */
+
+#define NET2BIG_NOR_BOOT_BASE		0xfff80000
+#define NET2BIG_NOR_BOOT_SIZE		SZ_512K
+
+/*****************************************************************************
+ * 512KB NOR Flash on Boot Device
+ ****************************************************************************/
+
+/*
+ * TODO: Check write support on flash MX29LV400CBTC-70G
+ */
+
+static struct mtd_partition net2big_partitions[] = {
+	{
+		.name		= "Full512kb",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0x00000000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data net2big_nor_flash_data = {
+	.width		= 1,
+	.parts		= net2big_partitions,
+	.nr_parts	= ARRAY_SIZE(net2big_partitions),
+};
+
+static struct resource net2big_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= NET2BIG_NOR_BOOT_BASE,
+	.end			= NET2BIG_NOR_BOOT_BASE
+					+ NET2BIG_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device net2big_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &net2big_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &net2big_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data net2big_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+/*
+ * i2c addr | chip         | description
+ * 0x32     | Ricoh 5C372b | RTC
+ * 0x50     | HT24LC08     | eeprom (1kB)
+ */
+static struct i2c_board_info __initdata net2big_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("rs5c372b", 0x32),
+	}, {
+		I2C_BOARD_INFO("24c08", 0x50),
+	},
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data net2big_sata_data = {
+	.n_ports	= 2,
+};
+
+#define NET2BIG_GPIO_SATA_POWER_REQ	19
+#define NET2BIG_GPIO_SATA0_POWER	23
+#define NET2BIG_GPIO_SATA1_POWER	25
+
+static void __init net2big_sata_power_init(void)
+{
+	int err;
+
+	/* Configure GPIOs over MPP max number. */
+	orion_gpio_set_valid(NET2BIG_GPIO_SATA0_POWER, 1);
+	orion_gpio_set_valid(NET2BIG_GPIO_SATA1_POWER, 1);
+
+	err = gpio_request(NET2BIG_GPIO_SATA0_POWER, "SATA0 power status");
+	if (err == 0) {
+		err = gpio_direction_input(NET2BIG_GPIO_SATA0_POWER);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA0_POWER);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA0 power GPIO\n");
+		return;
+	}
+
+	err = gpio_request(NET2BIG_GPIO_SATA1_POWER, "SATA1 power status");
+	if (err == 0) {
+		err = gpio_direction_input(NET2BIG_GPIO_SATA1_POWER);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA1_POWER);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA1 power GPIO\n");
+		goto err_free_1;
+	}
+
+	err = gpio_request(NET2BIG_GPIO_SATA_POWER_REQ, "SATA power request");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA_POWER_REQ, 0);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA_POWER_REQ);
+	}
+	if (err) {
+		pr_err("net2big: failed to setup SATA power request GPIO\n");
+		goto err_free_2;
+	}
+
+	if (gpio_get_value(NET2BIG_GPIO_SATA0_POWER) &&
+		gpio_get_value(NET2BIG_GPIO_SATA1_POWER)) {
+		return;
+	}
+
+	/*
+	 * SATA power up on both disk is done by pulling high the CPLD power
+	 * request line. The 300ms delay is related to the CPLD clock and is
+	 * needed to be sure that the CPLD has take into account the low line
+	 * status.
+	 */
+	msleep(300);
+	gpio_set_value(NET2BIG_GPIO_SATA_POWER_REQ, 1);
+	pr_info("net2big: power up SATA hard disks\n");
+
+	return;
+
+err_free_2:
+	gpio_free(NET2BIG_GPIO_SATA1_POWER);
+err_free_1:
+	gpio_free(NET2BIG_GPIO_SATA0_POWER);
+
+	return;
+}
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+/*
+ * The power front LEDs (blue and red) and SATA red LEDs are controlled via a
+ * single GPIO line and are compatible with the leds-gpio driver.
+ *
+ * The SATA blue LEDs have some hardware blink capabilities which are detailed
+ * in the following array:
+ *
+ * SATAx blue LED | SATAx activity | LED state
+ *                |                |
+ *       0        |       0        |  blink (rate 300ms)
+ *       1        |       0        |  off
+ *       ?        |       1        |  on
+ *
+ * Notes: The blue and the red front LED's can't be on at the same time.
+ *        Blue LED have priority.
+ */
+
+#define NET2BIG_GPIO_PWR_RED_LED	6
+#define NET2BIG_GPIO_PWR_BLUE_LED	16
+#define NET2BIG_GPIO_PWR_LED_BLINK_STOP	7
+
+#define NET2BIG_GPIO_SATA0_RED_LED	11
+#define NET2BIG_GPIO_SATA1_RED_LED	10
+
+#define NET2BIG_GPIO_SATA0_BLUE_LED	17
+#define NET2BIG_GPIO_SATA1_BLUE_LED	13
+
+static struct gpio_led net2big_leds[] = {
+	{
+		.name = "net2big:red:power",
+		.gpio = NET2BIG_GPIO_PWR_RED_LED,
+	},
+	{
+		.name = "net2big:blue:power",
+		.gpio = NET2BIG_GPIO_PWR_BLUE_LED,
+	},
+	{
+		.name = "net2big:red:sata0",
+		.gpio = NET2BIG_GPIO_SATA0_RED_LED,
+	},
+	{
+		.name = "net2big:red:sata1",
+		.gpio = NET2BIG_GPIO_SATA1_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data net2big_led_data = {
+	.num_leds = ARRAY_SIZE(net2big_leds),
+	.leds = net2big_leds,
+};
+
+static struct platform_device net2big_gpio_leds = {
+	.name           = "leds-gpio",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &net2big_led_data,
+	},
+};
+
+static void __init net2big_gpio_leds_init(void)
+{
+	int err;
+
+	/* Stop initial CPLD slow red/blue blinking on power LED. */
+	err = gpio_request(NET2BIG_GPIO_PWR_LED_BLINK_STOP,
+			   "Power LED blink stop");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_PWR_LED_BLINK_STOP, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_PWR_LED_BLINK_STOP);
+	}
+	if (err)
+		pr_err("net2big: failed to setup power LED blink GPIO\n");
+
+	/*
+	 * Configure SATA0 and SATA1 blue LEDs to blink in relation with the
+	 * hard disk activity.
+	 */
+	err = gpio_request(NET2BIG_GPIO_SATA0_BLUE_LED,
+			   "SATA0 blue LED control");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA0_BLUE_LED, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA0_BLUE_LED);
+	}
+	if (err)
+		pr_err("net2big: failed to setup SATA0 blue LED GPIO\n");
+
+	err = gpio_request(NET2BIG_GPIO_SATA1_BLUE_LED,
+			   "SATA1 blue LED control");
+	if (err == 0) {
+		err = gpio_direction_output(NET2BIG_GPIO_SATA1_BLUE_LED, 1);
+		if (err)
+			gpio_free(NET2BIG_GPIO_SATA1_BLUE_LED);
+	}
+	if (err)
+		pr_err("net2big: failed to setup SATA1 blue LED GPIO\n");
+
+	platform_device_register(&net2big_gpio_leds);
+}
+
+/****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NET2BIG_GPIO_PUSH_BUTTON	18
+#define NET2BIG_GPIO_POWER_SWITCH_ON	8
+#define NET2BIG_GPIO_POWER_SWITCH_OFF	9
+
+#define NET2BIG_SWITCH_POWER_ON		0x1
+#define NET2BIG_SWITCH_POWER_OFF	0x2
+
+static struct gpio_keys_button net2big_buttons[] = {
+	{
+		.type		= EV_SW,
+		.code		= NET2BIG_SWITCH_POWER_OFF,
+		.gpio		= NET2BIG_GPIO_POWER_SWITCH_OFF,
+		.desc		= "Power rocker switch (auto|off)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_SW,
+		.code		= NET2BIG_SWITCH_POWER_ON,
+		.gpio		= NET2BIG_GPIO_POWER_SWITCH_ON,
+		.desc		= "Power rocker switch (on|auto)",
+		.active_low	= 0,
+	},
+	{
+		.type		= EV_KEY,
+		.code		= KEY_POWER,
+		.gpio		= NET2BIG_GPIO_PUSH_BUTTON,
+		.desc		= "Front Push Button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data net2big_button_data = {
+	.buttons	= net2big_buttons,
+	.nbuttons	= ARRAY_SIZE(net2big_buttons),
+};
+
+static struct platform_device net2big_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &net2big_button_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int net2big_mpp_modes[] __initdata = {
+	MPP0_GPIO,	/* Raid mode (bit 0) */
+	MPP1_GPIO,	/* USB port 2 fuse (0 = Fail, 1 = Ok) */
+	MPP2_GPIO,	/* Raid mode (bit 1) */
+	MPP3_GPIO,	/* Board ID (bit 0) */
+	MPP4_GPIO,	/* Fan activity (0 = Off, 1 = On) */
+	MPP5_GPIO,	/* Fan fail detection */
+	MPP6_GPIO,	/* Red front LED (0 = Off, 1 = On) */
+	MPP7_GPIO,	/* Disable initial blinking on front LED */
+	MPP8_GPIO,	/* Rear power switch (on|auto) */
+	MPP9_GPIO,	/* Rear power switch (auto|off) */
+	MPP10_GPIO,	/* SATA 1 red LED (0 = Off, 1 = On) */
+	MPP11_GPIO,	/* SATA 0 red LED (0 = Off, 1 = On) */
+	MPP12_GPIO,	/* Board ID (bit 1) */
+	MPP13_GPIO,	/* SATA 1 blue LED blink control */
+	MPP14_SATA_LED,
+	MPP15_SATA_LED,
+	MPP16_GPIO,	/* Blue front LED control */
+	MPP17_GPIO,	/* SATA 0 blue LED blink control */
+	MPP18_GPIO,	/* Front button (0 = Released, 1 = Pushed ) */
+	MPP19_GPIO,	/* SATA{0,1} power On/Off request */
+	0,
+	/* 22: USB port 1 fuse (0 = Fail, 1 = Ok) */
+	/* 23: SATA 0 power status */
+	/* 24: Board power off */
+	/* 25: SATA 1 power status */
+};
+
+#define NET2BIG_GPIO_POWER_OFF		24
+
+static void net2big_power_off(void)
+{
+	gpio_set_value(NET2BIG_GPIO_POWER_OFF, 1);
+}
+
+static void __init net2big_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(net2big_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&net2big_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	net2big_sata_power_init();
+	orion5x_sata_init(&net2big_sata_data);
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    NET2BIG_NOR_BOOT_BASE,
+				    NET2BIG_NOR_BOOT_SIZE);
+	platform_device_register(&net2big_nor_flash);
+
+	platform_device_register(&net2big_gpio_buttons);
+	net2big_gpio_leds_init();
+
+	i2c_register_board_info(0, net2big_i2c_devices,
+				ARRAY_SIZE(net2big_i2c_devices));
+
+	orion_gpio_set_valid(NET2BIG_GPIO_POWER_OFF, 1);
+
+	if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = net2big_power_off;
+	else
+		pr_err("net2big: failed to configure power-off GPIO\n");
+
+	pr_notice("net2big: Flash writing is not yet supported.\n");
+}
+
+/* Warning: LaCie use a wrong mach-type (0x20e=526) in their bootloader. */
+MACHINE_START(NET2BIG, "LaCie 2Big Network")
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= net2big_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/orion5x.h b/arch/arm/mach-orion5x/orion5x.h
new file mode 100644
index 000000000..26f1ccb8c
--- /dev/null
+++ b/arch/arm/mach-orion5x/orion5x.h
@@ -0,0 +1,143 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Generic definitions of Orion SoC flavors:
+ *  Orion-1, Orion-VoIP, Orion-NAS, Orion-2, and Orion-1-90.
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ */
+
+#ifndef __ASM_ARCH_ORION5X_H
+#define __ASM_ARCH_ORION5X_H
+
+#include "irqs.h"
+
+/*****************************************************************************
+ * Orion Address Maps
+ *
+ * phys
+ * e0000000	PCIe MEM space
+ * e8000000	PCI MEM space
+ * f0000000	PCIe WA space (Orion-1/Orion-NAS only)
+ * f1000000	on-chip peripheral registers
+ * f2000000	PCIe I/O space
+ * f2100000	PCI I/O space
+ * f2200000	SRAM dedicated for the crypto unit
+ * f4000000	device bus mappings (boot)
+ * fa000000	device bus mappings (cs0)
+ * fa800000	device bus mappings (cs2)
+ * fc000000	device bus mappings (cs0/cs1)
+ *
+ * virt		phys		size
+ * fec00000	f1000000	1M	on-chip peripheral registers
+ * fee00000	f2000000	64K	PCIe I/O space
+ * fee10000	f2100000	64K	PCI I/O space
+ * fd000000	f0000000	16M	PCIe WA space (Orion-1/Orion-NAS only)
+ ****************************************************************************/
+#define ORION5X_REGS_PHYS_BASE		0xf1000000
+#define ORION5X_REGS_VIRT_BASE		IOMEM(0xfec00000)
+#define ORION5X_REGS_SIZE		SZ_1M
+
+#define ORION5X_PCIE_IO_PHYS_BASE	0xf2000000
+#define ORION5X_PCIE_IO_BUS_BASE	0x00000000
+#define ORION5X_PCIE_IO_SIZE		SZ_64K
+
+#define ORION5X_PCI_IO_PHYS_BASE	0xf2100000
+#define ORION5X_PCI_IO_BUS_BASE		0x00010000
+#define ORION5X_PCI_IO_SIZE		SZ_64K
+
+#define ORION5X_SRAM_PHYS_BASE		(0xf2200000)
+#define ORION5X_SRAM_SIZE		SZ_8K
+
+/* Relevant only for Orion-1/Orion-NAS */
+#define ORION5X_PCIE_WA_PHYS_BASE	0xf0000000
+#define ORION5X_PCIE_WA_VIRT_BASE	IOMEM(0xfd000000)
+#define ORION5X_PCIE_WA_SIZE		SZ_16M
+
+#define ORION5X_PCIE_MEM_PHYS_BASE	0xe0000000
+#define ORION5X_PCIE_MEM_SIZE		SZ_128M
+
+#define ORION5X_PCI_MEM_PHYS_BASE	0xe8000000
+#define ORION5X_PCI_MEM_SIZE		SZ_128M
+
+/*******************************************************************************
+ * Orion Registers Map
+ ******************************************************************************/
+
+#define ORION5X_DDR_PHYS_BASE           (ORION5X_REGS_PHYS_BASE + 0x00000)
+#define  ORION5X_DDR_WINS_BASE          (ORION5X_DDR_PHYS_BASE + 0x1500)
+#define  ORION5X_DDR_WINS_SZ            (0x10)
+#define ORION5X_DDR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x00000)
+#define ORION5X_DEV_BUS_PHYS_BASE	(ORION5X_REGS_PHYS_BASE + 0x10000)
+#define ORION5X_DEV_BUS_VIRT_BASE	(ORION5X_REGS_VIRT_BASE + 0x10000)
+#define ORION5X_DEV_BUS_REG(x)		(ORION5X_DEV_BUS_VIRT_BASE + (x))
+#define  GPIO_VIRT_BASE			ORION5X_DEV_BUS_REG(0x0100)
+#define  SPI_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE + 0x0600)
+#define  I2C_PHYS_BASE			(ORION5X_DEV_BUS_PHYS_BASE + 0x1000)
+#define  UART0_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE + 0x2000)
+#define  UART0_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE + 0x2000)
+#define  UART1_PHYS_BASE		(ORION5X_DEV_BUS_PHYS_BASE + 0x2100)
+#define  UART1_VIRT_BASE		(ORION5X_DEV_BUS_VIRT_BASE + 0x2100)
+
+#define ORION5X_BRIDGE_VIRT_BASE	(ORION5X_REGS_VIRT_BASE + 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE	(ORION5X_REGS_PHYS_BASE + 0x20000)
+#define  ORION5X_BRIDGE_WINS_BASE       (ORION5X_BRIDGE_PHYS_BASE)
+#define  ORION5X_BRIDGE_WINS_SZ         (0x80)
+
+#define ORION5X_PCI_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x30000)
+
+#define ORION5X_PCIE_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x40000)
+
+#define ORION5X_USB0_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0x50000)
+#define ORION5X_USB0_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x50000)
+
+#define ORION5X_XOR_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0x60900)
+#define ORION5X_XOR_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x60900)
+
+#define ORION5X_ETH_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0x70000)
+#define ORION5X_ETH_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x70000)
+
+#define ORION5X_SATA_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0x80000)
+#define ORION5X_SATA_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0x80000)
+
+#define ORION5X_CRYPTO_PHYS_BASE	(ORION5X_REGS_PHYS_BASE + 0x90000)
+
+#define ORION5X_USB1_PHYS_BASE		(ORION5X_REGS_PHYS_BASE + 0xa0000)
+#define ORION5X_USB1_VIRT_BASE		(ORION5X_REGS_VIRT_BASE + 0xa0000)
+
+/*******************************************************************************
+ * Device Bus Registers
+ ******************************************************************************/
+#define MPP_0_7_CTRL		ORION5X_DEV_BUS_REG(0x000)
+#define MPP_8_15_CTRL		ORION5X_DEV_BUS_REG(0x004)
+#define MPP_16_19_CTRL		ORION5X_DEV_BUS_REG(0x050)
+#define MPP_DEV_CTRL		ORION5X_DEV_BUS_REG(0x008)
+#define MPP_RESET_SAMPLE	ORION5X_DEV_BUS_REG(0x010)
+#define DEV_BANK_0_PARAM	ORION5X_DEV_BUS_REG(0x45c)
+#define DEV_BANK_1_PARAM	ORION5X_DEV_BUS_REG(0x460)
+#define DEV_BANK_2_PARAM	ORION5X_DEV_BUS_REG(0x464)
+#define DEV_BANK_BOOT_PARAM	ORION5X_DEV_BUS_REG(0x46c)
+#define DEV_BUS_CTRL		ORION5X_DEV_BUS_REG(0x4c0)
+#define DEV_BUS_INT_CAUSE	ORION5X_DEV_BUS_REG(0x4d0)
+#define DEV_BUS_INT_MASK	ORION5X_DEV_BUS_REG(0x4d4)
+
+/*******************************************************************************
+ * Supported Devices & Revisions
+ ******************************************************************************/
+/* Orion-1 (88F5181) and Orion-VoIP (88F5181L) */
+#define MV88F5181_DEV_ID	0x5181
+#define MV88F5181_REV_B1	3
+#define MV88F5181L_REV_A0	8
+#define MV88F5181L_REV_A1	9
+/* Orion-NAS (88F5182) */
+#define MV88F5182_DEV_ID	0x5182
+#define MV88F5182_REV_A2	2
+/* Orion-2 (88F5281) */
+#define MV88F5281_DEV_ID	0x5281
+#define MV88F5281_REV_D0	4
+#define MV88F5281_REV_D1	5
+#define MV88F5281_REV_D2	6
+/* Orion-1-90 (88F6183) */
+#define MV88F6183_DEV_ID	0x6183
+#define MV88F6183_REV_B0	3
+
+#endif
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
new file mode 100644
index 000000000..888fdc909
--- /dev/null
+++ b/arch/arm/mach-orion5x/pci.c
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/pci.c
+ *
+ * PCI and PCIe functions for Marvell Orion System On Chip
+ *
+ * Maintainer: Tzachi Perelstein <tzachi@marvell.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/mbus.h>
+#include <video/vga.h>
+#include <asm/irq.h>
+#include <asm/mach/pci.h>
+#include <plat/pcie.h>
+#include <plat/addr-map.h>
+#include "common.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * Orion has one PCIe controller and one PCI controller.
+ *
+ * Note1: The local PCIe bus number is '0'. The local PCI bus number
+ * follows the scanned PCIe bridged busses, if any.
+ *
+ * Note2: It is possible for PCI/PCIe agents to access many subsystem's
+ * space, by configuring BARs and Address Decode Windows, e.g. flashes on
+ * device bus, Orion registers, etc. However this code only enable the
+ * access to DDR banks.
+ ****************************************************************************/
+
+
+/*****************************************************************************
+ * PCIe controller
+ ****************************************************************************/
+#define PCIE_BASE	(ORION5X_PCIE_VIRT_BASE)
+
+void __init orion5x_pcie_id(u32 *dev, u32 *rev)
+{
+	*dev = orion_pcie_dev_id(PCIE_BASE);
+	*rev = orion_pcie_rev(PCIE_BASE);
+}
+
+static int pcie_valid_config(int bus, int dev)
+{
+	/*
+	 * Don't go out when trying to access --
+	 * 1. nonexisting device on local bus
+	 * 2. where there's no device connected (no link)
+	 */
+	if (bus == 0 && dev == 0)
+		return 1;
+
+	if (!orion_pcie_link_up(PCIE_BASE))
+		return 0;
+
+	if (bus == 0 && dev != 1)
+		return 0;
+
+	return 1;
+}
+
+
+/*
+ * PCIe config cycles are done by programming the PCIE_CONF_ADDR register
+ * and then reading the PCIE_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(orion5x_pcie_lock);
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			int size, u32 *val)
+{
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	spin_lock_irqsave(&orion5x_pcie_lock, flags);
+	ret = orion_pcie_rd_conf(PCIE_BASE, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&orion5x_pcie_lock, flags);
+
+	return ret;
+}
+
+static int pcie_rd_conf_wa(struct pci_bus *bus, u32 devfn,
+			   int where, int size, u32 *val)
+{
+	int ret;
+
+	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	/*
+	 * We only support access to the non-extended configuration
+	 * space when using the WA access method (or we would have to
+	 * sacrifice 256M of CPU virtual address space.)
+	 */
+	if (where >= 0x100) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	ret = orion_pcie_rd_conf_wa(ORION5X_PCIE_WA_VIRT_BASE,
+				    bus, devfn, where, size, val);
+
+	return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			int where, int size, u32 val)
+{
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(bus->number, PCI_SLOT(devfn)) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&orion5x_pcie_lock, flags);
+	ret = orion_pcie_wr_conf(PCIE_BASE, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&orion5x_pcie_lock, flags);
+
+	return ret;
+}
+
+static struct pci_ops pcie_ops = {
+	.read = pcie_rd_conf,
+	.write = pcie_wr_conf,
+};
+
+
+static int __init pcie_setup(struct pci_sys_data *sys)
+{
+	struct resource *res;
+	struct resource realio;
+	int dev;
+
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_setup(PCIE_BASE);
+
+	/*
+	 * Check whether to apply Orion-1/Orion-NAS PCIe config
+	 * read transaction workaround.
+	 */
+	dev = orion_pcie_dev_id(PCIE_BASE);
+	if (dev == MV88F5181_DEV_ID || dev == MV88F5182_DEV_ID) {
+		printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
+				   "read transaction workaround\n");
+		mvebu_mbus_add_window_by_id(ORION_MBUS_PCIE_WA_TARGET,
+					    ORION_MBUS_PCIE_WA_ATTR,
+					    ORION5X_PCIE_WA_PHYS_BASE,
+					    ORION5X_PCIE_WA_SIZE);
+		pcie_ops.read = pcie_rd_conf_wa;
+	}
+
+	realio.start = sys->busnr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, ORION5X_PCIE_IO_PHYS_BASE);
+
+	/*
+	 * Request resources.
+	 */
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	if (!res)
+		panic("pcie_setup unable to alloc resources");
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	res->name = "PCIe Memory Space";
+	res->flags = IORESOURCE_MEM;
+	res->start = ORION5X_PCIE_MEM_PHYS_BASE;
+	res->end = res->start + ORION5X_PCIE_MEM_SIZE - 1;
+	if (request_resource(&iomem_resource, res))
+		panic("Request PCIe Memory resource failed\n");
+	pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
+
+	return 1;
+}
+
+/*****************************************************************************
+ * PCI controller
+ ****************************************************************************/
+#define ORION5X_PCI_REG(x)	(ORION5X_PCI_VIRT_BASE + (x))
+#define PCI_MODE		ORION5X_PCI_REG(0xd00)
+#define PCI_CMD			ORION5X_PCI_REG(0xc00)
+#define PCI_P2P_CONF		ORION5X_PCI_REG(0x1d14)
+#define PCI_CONF_ADDR		ORION5X_PCI_REG(0xc78)
+#define PCI_CONF_DATA		ORION5X_PCI_REG(0xc7c)
+
+/*
+ * PCI_MODE bits
+ */
+#define PCI_MODE_64BIT			(1 << 2)
+#define PCI_MODE_PCIX			((1 << 4) | (1 << 5))
+
+/*
+ * PCI_CMD bits
+ */
+#define PCI_CMD_HOST_REORDER		(1 << 29)
+
+/*
+ * PCI_P2P_CONF bits
+ */
+#define PCI_P2P_BUS_OFFS		16
+#define PCI_P2P_BUS_MASK		(0xff << PCI_P2P_BUS_OFFS)
+#define PCI_P2P_DEV_OFFS		24
+#define PCI_P2P_DEV_MASK		(0x1f << PCI_P2P_DEV_OFFS)
+
+/*
+ * PCI_CONF_ADDR bits
+ */
+#define PCI_CONF_REG(reg)		((reg) & 0xfc)
+#define PCI_CONF_FUNC(func)		(((func) & 0x3) << 8)
+#define PCI_CONF_DEV(dev)		(((dev) & 0x1f) << 11)
+#define PCI_CONF_BUS(bus)		(((bus) & 0xff) << 16)
+#define PCI_CONF_ADDR_EN		(1 << 31)
+
+/*
+ * Internal configuration space
+ */
+#define PCI_CONF_FUNC_STAT_CMD		0
+#define PCI_CONF_REG_STAT_CMD		4
+#define PCIX_STAT			0x64
+#define PCIX_STAT_BUS_OFFS		8
+#define PCIX_STAT_BUS_MASK		(0xff << PCIX_STAT_BUS_OFFS)
+
+/*
+ * PCI Address Decode Windows registers
+ */
+#define PCI_BAR_SIZE_DDR_CS(n)	(((n) == 0) ? ORION5X_PCI_REG(0xc08) : \
+				 ((n) == 1) ? ORION5X_PCI_REG(0xd08) : \
+				 ((n) == 2) ? ORION5X_PCI_REG(0xc0c) : \
+				 ((n) == 3) ? ORION5X_PCI_REG(0xd0c) : NULL)
+#define PCI_BAR_REMAP_DDR_CS(n)	(((n) == 0) ? ORION5X_PCI_REG(0xc48) : \
+				 ((n) == 1) ? ORION5X_PCI_REG(0xd48) : \
+				 ((n) == 2) ? ORION5X_PCI_REG(0xc4c) : \
+				 ((n) == 3) ? ORION5X_PCI_REG(0xd4c) : NULL)
+#define PCI_BAR_ENABLE		ORION5X_PCI_REG(0xc3c)
+#define PCI_ADDR_DECODE_CTRL	ORION5X_PCI_REG(0xd3c)
+
+/*
+ * PCI configuration helpers for BAR settings
+ */
+#define PCI_CONF_FUNC_BAR_CS(n)		((n) >> 1)
+#define PCI_CONF_REG_BAR_LO_CS(n)	(((n) & 1) ? 0x18 : 0x10)
+#define PCI_CONF_REG_BAR_HI_CS(n)	(((n) & 1) ? 0x1c : 0x14)
+
+/*
+ * PCI config cycles are done by programming the PCI_CONF_ADDR register
+ * and then reading the PCI_CONF_DATA register. Need to make sure these
+ * transactions are atomic.
+ */
+static DEFINE_SPINLOCK(orion5x_pci_lock);
+
+static int orion5x_pci_cardbus_mode;
+
+static int orion5x_pci_local_bus_nr(void)
+{
+	u32 conf = readl(PCI_P2P_CONF);
+	return((conf & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS);
+}
+
+static int orion5x_pci_hw_rd_conf(int bus, int dev, u32 func,
+					u32 where, u32 size, u32 *val)
+{
+	unsigned long flags;
+	spin_lock_irqsave(&orion5x_pci_lock, flags);
+
+	writel(PCI_CONF_BUS(bus) |
+		PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+		PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN, PCI_CONF_ADDR);
+
+	*val = readl(PCI_CONF_DATA);
+
+	if (size == 1)
+		*val = (*val >> (8*(where & 0x3))) & 0xff;
+	else if (size == 2)
+		*val = (*val >> (8*(where & 0x3))) & 0xffff;
+
+	spin_unlock_irqrestore(&orion5x_pci_lock, flags);
+
+	return PCIBIOS_SUCCESSFUL;
+}
+
+static int orion5x_pci_hw_wr_conf(int bus, int dev, u32 func,
+					u32 where, u32 size, u32 val)
+{
+	unsigned long flags;
+	int ret = PCIBIOS_SUCCESSFUL;
+
+	spin_lock_irqsave(&orion5x_pci_lock, flags);
+
+	writel(PCI_CONF_BUS(bus) |
+		PCI_CONF_DEV(dev) | PCI_CONF_REG(where) |
+		PCI_CONF_FUNC(func) | PCI_CONF_ADDR_EN, PCI_CONF_ADDR);
+
+	if (size == 4) {
+		__raw_writel(val, PCI_CONF_DATA);
+	} else if (size == 2) {
+		__raw_writew(val, PCI_CONF_DATA + (where & 0x3));
+	} else if (size == 1) {
+		__raw_writeb(val, PCI_CONF_DATA + (where & 0x3));
+	} else {
+		ret = PCIBIOS_BAD_REGISTER_NUMBER;
+	}
+
+	spin_unlock_irqrestore(&orion5x_pci_lock, flags);
+
+	return ret;
+}
+
+static int orion5x_pci_valid_config(int bus, u32 devfn)
+{
+	if (bus == orion5x_pci_local_bus_nr()) {
+		/*
+		 * Don't go out for local device
+		 */
+		if (PCI_SLOT(devfn) == 0 && PCI_FUNC(devfn) != 0)
+			return 0;
+
+		/*
+		 * When the PCI signals are directly connected to a
+		 * Cardbus slot, ignore all but device IDs 0 and 1.
+		 */
+		if (orion5x_pci_cardbus_mode && PCI_SLOT(devfn) > 1)
+			return 0;
+	}
+
+	return 1;
+}
+
+static int orion5x_pci_rd_conf(struct pci_bus *bus, u32 devfn,
+				int where, int size, u32 *val)
+{
+	if (!orion5x_pci_valid_config(bus->number, devfn)) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	return orion5x_pci_hw_rd_conf(bus->number, PCI_SLOT(devfn),
+					PCI_FUNC(devfn), where, size, val);
+}
+
+static int orion5x_pci_wr_conf(struct pci_bus *bus, u32 devfn,
+				int where, int size, u32 val)
+{
+	if (!orion5x_pci_valid_config(bus->number, devfn))
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	return orion5x_pci_hw_wr_conf(bus->number, PCI_SLOT(devfn),
+					PCI_FUNC(devfn), where, size, val);
+}
+
+static struct pci_ops pci_ops = {
+	.read = orion5x_pci_rd_conf,
+	.write = orion5x_pci_wr_conf,
+};
+
+static void __init orion5x_pci_set_bus_nr(int nr)
+{
+	u32 p2p = readl(PCI_P2P_CONF);
+
+	if (readl(PCI_MODE) & PCI_MODE_PCIX) {
+		/*
+		 * PCI-X mode
+		 */
+		u32 pcix_status, bus, dev;
+		bus = (p2p & PCI_P2P_BUS_MASK) >> PCI_P2P_BUS_OFFS;
+		dev = (p2p & PCI_P2P_DEV_MASK) >> PCI_P2P_DEV_OFFS;
+		orion5x_pci_hw_rd_conf(bus, dev, 0, PCIX_STAT, 4, &pcix_status);
+		pcix_status &= ~PCIX_STAT_BUS_MASK;
+		pcix_status |= (nr << PCIX_STAT_BUS_OFFS);
+		orion5x_pci_hw_wr_conf(bus, dev, 0, PCIX_STAT, 4, pcix_status);
+	} else {
+		/*
+		 * PCI Conventional mode
+		 */
+		p2p &= ~PCI_P2P_BUS_MASK;
+		p2p |= (nr << PCI_P2P_BUS_OFFS);
+		writel(p2p, PCI_P2P_CONF);
+	}
+}
+
+static void __init orion5x_pci_master_slave_enable(void)
+{
+	int bus_nr, func, reg;
+	u32 val;
+
+	bus_nr = orion5x_pci_local_bus_nr();
+	func = PCI_CONF_FUNC_STAT_CMD;
+	reg = PCI_CONF_REG_STAT_CMD;
+	orion5x_pci_hw_rd_conf(bus_nr, 0, func, reg, 4, &val);
+	val |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
+	orion5x_pci_hw_wr_conf(bus_nr, 0, func, reg, 4, val | 0x7);
+}
+
+static void __init orion5x_setup_pci_wins(void)
+{
+	const struct mbus_dram_target_info *dram = mv_mbus_dram_info();
+	u32 win_enable;
+	int bus;
+	int i;
+
+	/*
+	 * First, disable windows.
+	 */
+	win_enable = 0xffffffff;
+	writel(win_enable, PCI_BAR_ENABLE);
+
+	/*
+	 * Setup windows for DDR banks.
+	 */
+	bus = orion5x_pci_local_bus_nr();
+
+	for (i = 0; i < dram->num_cs; i++) {
+		const struct mbus_dram_window *cs = dram->cs + i;
+		u32 func = PCI_CONF_FUNC_BAR_CS(cs->cs_index);
+		u32 reg;
+		u32 val;
+
+		/*
+		 * Write DRAM bank base address register.
+		 */
+		reg = PCI_CONF_REG_BAR_LO_CS(cs->cs_index);
+		orion5x_pci_hw_rd_conf(bus, 0, func, reg, 4, &val);
+		val = (cs->base & 0xfffff000) | (val & 0xfff);
+		orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, val);
+
+		/*
+		 * Write DRAM bank size register.
+		 */
+		reg = PCI_CONF_REG_BAR_HI_CS(cs->cs_index);
+		orion5x_pci_hw_wr_conf(bus, 0, func, reg, 4, 0);
+		writel((cs->size - 1) & 0xfffff000,
+			PCI_BAR_SIZE_DDR_CS(cs->cs_index));
+		writel(cs->base & 0xfffff000,
+			PCI_BAR_REMAP_DDR_CS(cs->cs_index));
+
+		/*
+		 * Enable decode window for this chip select.
+		 */
+		win_enable &= ~(1 << cs->cs_index);
+	}
+
+	/*
+	 * Re-enable decode windows.
+	 */
+	writel(win_enable, PCI_BAR_ENABLE);
+
+	/*
+	 * Disable automatic update of address remapping when writing to BARs.
+	 */
+	orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1);
+}
+
+static int __init pci_setup(struct pci_sys_data *sys)
+{
+	struct resource *res;
+	struct resource realio;
+
+	/*
+	 * Point PCI unit MBUS decode windows to DRAM space.
+	 */
+	orion5x_setup_pci_wins();
+
+	/*
+	 * Master + Slave enable
+	 */
+	orion5x_pci_master_slave_enable();
+
+	/*
+	 * Force ordering
+	 */
+	orion5x_setbits(PCI_CMD, PCI_CMD_HOST_REORDER);
+
+	realio.start = sys->busnr * SZ_64K;
+	realio.end = realio.start + SZ_64K - 1;
+	pci_remap_iospace(&realio, ORION5X_PCI_IO_PHYS_BASE);
+
+	/*
+	 * Request resources
+	 */
+	res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+	if (!res)
+		panic("pci_setup unable to alloc resources");
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	res->name = "PCI Memory Space";
+	res->flags = IORESOURCE_MEM;
+	res->start = ORION5X_PCI_MEM_PHYS_BASE;
+	res->end = res->start + ORION5X_PCI_MEM_SIZE - 1;
+	if (request_resource(&iomem_resource, res))
+		panic("Request PCI Memory resource failed\n");
+	pci_add_resource_offset(&sys->resources, res, sys->mem_offset);
+
+	return 1;
+}
+
+
+/*****************************************************************************
+ * General PCIe + PCI
+ ****************************************************************************/
+
+/*
+ * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it
+ * is operating as a root complex this needs to be switched to
+ * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on
+ * the device. Decoding setup is handled by the orion code.
+ */
+static void rc_pci_fixup(struct pci_dev *dev)
+{
+	if (dev->bus->parent == NULL && dev->devfn == 0) {
+		int i;
+
+		dev->class &= 0xff;
+		dev->class |= PCI_CLASS_BRIDGE_HOST << 8;
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end   = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static int orion5x_pci_disabled __initdata;
+
+void __init orion5x_pci_disable(void)
+{
+	orion5x_pci_disabled = 1;
+}
+
+void __init orion5x_pci_set_cardbus_mode(void)
+{
+	orion5x_pci_cardbus_mode = 1;
+}
+
+int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys)
+{
+	vga_base = ORION5X_PCIE_MEM_PHYS_BASE;
+
+	if (nr == 0) {
+		orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr);
+		return pcie_setup(sys);
+	}
+
+	if (nr == 1 && !orion5x_pci_disabled) {
+		orion5x_pci_set_bus_nr(sys->busnr);
+		return pci_setup(sys);
+	}
+
+	return 0;
+}
+
+int __init orion5x_pci_sys_scan_bus(int nr, struct pci_host_bridge *bridge)
+{
+	struct pci_sys_data *sys = pci_host_bridge_priv(bridge);
+
+	list_splice_init(&sys->resources, &bridge->windows);
+	bridge->dev.parent = NULL;
+	bridge->sysdata = sys;
+	bridge->busnr = sys->busnr;
+
+	if (nr == 0) {
+		bridge->ops = &pcie_ops;
+		return pci_scan_root_bus_bridge(bridge);
+	}
+
+	if (nr == 1 && !orion5x_pci_disabled) {
+		bridge->ops = &pci_ops;
+		return pci_scan_root_bus_bridge(bridge);
+	}
+
+	BUG();
+	return -ENODEV;
+}
+
+int __init orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int bus = dev->bus->number;
+
+	/*
+	 * PCIe endpoint?
+	 */
+	if (orion5x_pci_disabled || bus < orion5x_pci_local_bus_nr())
+		return IRQ_ORION5X_PCIE0_INT;
+
+	return -1;
+}
diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
new file mode 100644
index 000000000..432fc8357
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c
+ *
+ * Marvell Orion-VoIP FXO Reference Design Setup
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/platform_data/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * RD-88F5181L FXO Info
+ ****************************************************************************/
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define RD88F5181L_FXO_NOR_BOOT_BASE		0xff800000
+#define RD88F5181L_FXO_NOR_BOOT_SIZE		SZ_8M
+
+
+/*****************************************************************************
+ * 8M NOR Flash on Device bus Boot chip select
+ ****************************************************************************/
+static struct physmap_flash_data rd88f5181l_fxo_nor_boot_flash_data = {
+	.width		= 1,
+};
+
+static struct resource rd88f5181l_fxo_nor_boot_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= RD88F5181L_FXO_NOR_BOOT_BASE,
+	.end		= RD88F5181L_FXO_NOR_BOOT_BASE +
+			  RD88F5181L_FXO_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device rd88f5181l_fxo_nor_boot_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &rd88f5181l_fxo_nor_boot_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &rd88f5181l_fxo_nor_boot_flash_resource,
+};
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int rd88f5181l_fxo_mpp_modes[] __initdata = {
+	MPP0_GPIO,		/* LED1 CardBus LED (front panel) */
+	MPP1_GPIO,		/* PCI_intA */
+	MPP2_GPIO,		/* Hard Reset / Factory Init*/
+	MPP3_GPIO,		/* FXS or DAA select */
+	MPP4_GPIO,		/* LED6 - phone LED (front panel) */
+	MPP5_GPIO,		/* LED5 - phone LED (front panel) */
+	MPP6_PCI_CLK,		/* CPU PCI refclk */
+	MPP7_PCI_CLK,		/* PCI/PCIe refclk */
+	MPP8_GPIO,		/* CardBus reset */
+	MPP9_GPIO,		/* GE_RXERR */
+	MPP10_GPIO,		/* LED2 MiniPCI LED (front panel) */
+	MPP11_GPIO,		/* Lifeline control */
+	MPP12_GIGE,		/* GE_TXD[4] */
+	MPP13_GIGE,		/* GE_TXD[5] */
+	MPP14_GIGE,		/* GE_TXD[6] */
+	MPP15_GIGE,		/* GE_TXD[7] */
+	MPP16_GIGE,		/* GE_RXD[4] */
+	MPP17_GIGE,		/* GE_RXD[5] */
+	MPP18_GIGE,		/* GE_RXD[6] */
+	MPP19_GIGE,		/* GE_RXD[7] */
+	0,
+};
+
+static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data rd88f5181l_fxo_switch_chip_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan4",
+	.port_names[7]	= "lan3",
+};
+
+static void __init rd88f5181l_fxo_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(rd88f5181l_fxo_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&rd88f5181l_fxo_eth_data);
+	orion5x_eth_switch_init(&rd88f5181l_fxo_switch_chip_data);
+	orion5x_uart0_init();
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5181L_FXO_NOR_BOOT_BASE,
+				    RD88F5181L_FXO_NOR_BOOT_SIZE);
+	platform_device_register(&rd88f5181l_fxo_nor_boot_flash);
+}
+
+static int __init
+rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * Mini-PCI / Cardbus slot.
+	 */
+	return gpio_to_irq(1);
+}
+
+static struct hw_pci rd88f5181l_fxo_pci __initdata = {
+	.nr_controllers	= 2,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= rd88f5181l_fxo_pci_map_irq,
+};
+
+static int __init rd88f5181l_fxo_pci_init(void)
+{
+	if (machine_is_rd88f5181l_fxo()) {
+		orion5x_pci_set_cardbus_mode();
+		pci_common_init(&rd88f5181l_fxo_pci);
+	}
+
+	return 0;
+}
+subsys_initcall(rd88f5181l_fxo_pci_init);
+
+MACHINE_START(RD88F5181L_FXO, "Marvell Orion-VoIP FXO Reference Design")
+	/* Maintainer: Nicolas Pitre <nico@marvell.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= rd88f5181l_fxo_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
new file mode 100644
index 000000000..d4b1a9c3c
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
@@ -0,0 +1,183 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/rd88f5181l-ge-setup.c
+ *
+ * Marvell Orion-VoIP GE Reference Design Setup
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * RD-88F5181L GE Info
+ ****************************************************************************/
+/*
+ * 16M NOR flash Device bus boot chip select
+ */
+#define RD88F5181L_GE_NOR_BOOT_BASE		0xff000000
+#define RD88F5181L_GE_NOR_BOOT_SIZE		SZ_16M
+
+
+/*****************************************************************************
+ * 16M NOR Flash on Device bus Boot chip select
+ ****************************************************************************/
+static struct physmap_flash_data rd88f5181l_ge_nor_boot_flash_data = {
+	.width		= 1,
+};
+
+static struct resource rd88f5181l_ge_nor_boot_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= RD88F5181L_GE_NOR_BOOT_BASE,
+	.end		= RD88F5181L_GE_NOR_BOOT_BASE +
+			  RD88F5181L_GE_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device rd88f5181l_ge_nor_boot_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &rd88f5181l_ge_nor_boot_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &rd88f5181l_ge_nor_boot_flash_resource,
+};
+
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int rd88f5181l_ge_mpp_modes[] __initdata = {
+	MPP0_GPIO,		/* LED1 */
+	MPP1_GPIO,		/* LED5 */
+	MPP2_GPIO,		/* LED4 */
+	MPP3_GPIO,		/* LED3 */
+	MPP4_GPIO,		/* PCI_intA */
+	MPP5_GPIO,		/* RTC interrupt */
+	MPP6_PCI_CLK,		/* CPU PCI refclk */
+	MPP7_PCI_CLK,		/* PCI/PCIe refclk */
+	MPP8_GPIO,		/* 88e6131 interrupt */
+	MPP9_GPIO,		/* GE_RXERR */
+	MPP10_GPIO,		/* PCI_intB */
+	MPP11_GPIO,		/* LED2 */
+	MPP12_GIGE,		/* GE_TXD[4] */
+	MPP13_GIGE,		/* GE_TXD[5] */
+	MPP14_GIGE,		/* GE_TXD[6] */
+	MPP15_GIGE,		/* GE_TXD[7] */
+	MPP16_GIGE,		/* GE_RXD[4] */
+	MPP17_GIGE,		/* GE_RXD[5] */
+	MPP18_GIGE,		/* GE_RXD[6] */
+	MPP19_GIGE,		/* GE_RXD[7] */
+	0,
+};
+
+static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data rd88f5181l_ge_switch_chip_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan4",
+	.port_names[7]	= "lan3",
+};
+
+static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = {
+	I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+static void __init rd88f5181l_ge_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(rd88f5181l_ge_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&rd88f5181l_ge_eth_data);
+	orion5x_eth_switch_init(&rd88f5181l_ge_switch_chip_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5181L_GE_NOR_BOOT_BASE,
+				    RD88F5181L_GE_NOR_BOOT_SIZE);
+	platform_device_register(&rd88f5181l_ge_nor_boot_flash);
+
+	i2c_register_board_info(0, &rd88f5181l_ge_i2c_rtc, 1);
+}
+
+static int __init
+rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * Cardbus slot.
+	 */
+	if (pin == 1)
+		return gpio_to_irq(4);
+	else
+		return gpio_to_irq(10);
+}
+
+static struct hw_pci rd88f5181l_ge_pci __initdata = {
+	.nr_controllers	= 2,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= rd88f5181l_ge_pci_map_irq,
+};
+
+static int __init rd88f5181l_ge_pci_init(void)
+{
+	if (machine_is_rd88f5181l_ge()) {
+		orion5x_pci_set_cardbus_mode();
+		pci_common_init(&rd88f5181l_ge_pci);
+	}
+
+	return 0;
+}
+subsys_initcall(rd88f5181l_ge_pci_init);
+
+MACHINE_START(RD88F5181L_GE, "Marvell Orion-VoIP GE Reference Design")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= rd88f5181l_ge_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c
new file mode 100644
index 000000000..6ffcfc644
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f5182-setup.c
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/rd88f5182-setup.c
+ *
+ * Marvell Orion-NAS Reference Design Setup
+ *
+ * Maintainer: Ronen Shitrit <rshitrit@marvell.com>
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/i2c.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * RD-88F5182 Info
+ ****************************************************************************/
+
+/*
+ * 512K NOR flash Device bus boot chip select
+ */
+
+#define RD88F5182_NOR_BOOT_BASE		0xf4000000
+#define RD88F5182_NOR_BOOT_SIZE		SZ_512K
+
+/*
+ * 16M NOR flash on Device bus chip select 1
+ */
+
+#define RD88F5182_NOR_BASE		0xfc000000
+#define RD88F5182_NOR_SIZE		SZ_16M
+
+/*
+ * PCI
+ */
+
+#define RD88F5182_PCI_SLOT0_OFFS	7
+#define RD88F5182_PCI_SLOT0_IRQ_A_PIN	7
+#define RD88F5182_PCI_SLOT0_IRQ_B_PIN	6
+
+/*****************************************************************************
+ * 16M NOR Flash on Device bus CS1
+ ****************************************************************************/
+
+static struct physmap_flash_data rd88f5182_nor_flash_data = {
+	.width		= 1,
+};
+
+static struct resource rd88f5182_nor_flash_resource = {
+	.flags			= IORESOURCE_MEM,
+	.start			= RD88F5182_NOR_BASE,
+	.end			= RD88F5182_NOR_BASE + RD88F5182_NOR_SIZE - 1,
+};
+
+static struct platform_device rd88f5182_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &rd88f5182_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &rd88f5182_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * Use GPIO LED as CPU active indication
+ ****************************************************************************/
+
+#define RD88F5182_GPIO_LED		0
+
+static struct gpio_led rd88f5182_gpio_led_pins[] = {
+	{
+		.name		= "rd88f5182:cpu",
+		.default_trigger = "cpu0",
+		.gpio		= RD88F5182_GPIO_LED,
+	},
+};
+
+static struct gpio_led_platform_data rd88f5182_gpio_led_data = {
+	.leds		= rd88f5182_gpio_led_pins,
+	.num_leds	= ARRAY_SIZE(rd88f5182_gpio_led_pins),
+};
+
+static struct platform_device rd88f5182_gpio_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &rd88f5182_gpio_led_data,
+	},
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static void __init rd88f5182_pci_preinit(void)
+{
+	int pin;
+
+	/*
+	 * Configure PCI GPIO IRQ pins
+	 */
+	pin = RD88F5182_PCI_SLOT0_IRQ_A_PIN;
+	if (gpio_request(pin, "PCI IntA") == 0) {
+		if (gpio_direction_input(pin) == 0) {
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+		} else {
+			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
+					"set_irq_type pin %d\n", pin);
+			gpio_free(pin);
+		}
+	} else {
+		printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
+	}
+
+	pin = RD88F5182_PCI_SLOT0_IRQ_B_PIN;
+	if (gpio_request(pin, "PCI IntB") == 0) {
+		if (gpio_direction_input(pin) == 0) {
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+		} else {
+			printk(KERN_ERR "rd88f5182_pci_preinit failed to "
+					"set_irq_type pin %d\n", pin);
+			gpio_free(pin);
+		}
+	} else {
+		printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
+	}
+}
+
+static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot,
+	u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * PCI IRQs are connected via GPIOs
+	 */
+	switch (slot - RD88F5182_PCI_SLOT0_OFFS) {
+	case 0:
+		if (pin == 1)
+			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_A_PIN);
+		else
+			return gpio_to_irq(RD88F5182_PCI_SLOT0_IRQ_B_PIN);
+	default:
+		return -1;
+	}
+}
+
+static struct hw_pci rd88f5182_pci __initdata = {
+	.nr_controllers	= 2,
+	.preinit	= rd88f5182_pci_preinit,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= rd88f5182_pci_map_irq,
+};
+
+static int __init rd88f5182_pci_init(void)
+{
+	if (machine_is_rd88f5182())
+		pci_common_init(&rd88f5182_pci);
+
+	return 0;
+}
+
+subsys_initcall(rd88f5182_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data rd88f5182_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * RTC DS1338 on I2C bus
+ ****************************************************************************/
+static struct i2c_board_info __initdata rd88f5182_i2c_rtc = {
+	I2C_BOARD_INFO("ds1338", 0x68),
+};
+
+/*****************************************************************************
+ * Sata
+ ****************************************************************************/
+static struct mv_sata_platform_data rd88f5182_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int rd88f5182_mpp_modes[] __initdata = {
+	MPP0_GPIO,		/* Debug Led */
+	MPP1_GPIO,		/* Reset Switch */
+	MPP2_UNUSED,
+	MPP3_GPIO,		/* RTC Int */
+	MPP4_GPIO,
+	MPP5_GPIO,
+	MPP6_GPIO,		/* PCI_intA */
+	MPP7_GPIO,		/* PCI_intB */
+	MPP8_UNUSED,
+	MPP9_UNUSED,
+	MPP10_UNUSED,
+	MPP11_UNUSED,
+	MPP12_SATA_LED,		/* SATA 0 presence */
+	MPP13_SATA_LED,		/* SATA 1 presence */
+	MPP14_SATA_LED,		/* SATA 0 active */
+	MPP15_SATA_LED,		/* SATA 1 active */
+	MPP16_UNUSED,
+	MPP17_UNUSED,
+	MPP18_UNUSED,
+	MPP19_UNUSED,
+	0,
+};
+
+static void __init rd88f5182_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(rd88f5182_mpp_modes);
+
+	/*
+	 * MPP[20] PCI Clock to MV88F5182
+	 * MPP[21] PCI Clock to mini PCI CON11
+	 * MPP[22] USB 0 over current indication
+	 * MPP[23] USB 1 over current indication
+	 * MPP[24] USB 1 over current enable
+	 * MPP[25] USB 0 over current enable
+	 */
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&rd88f5182_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&rd88f5182_sata_data);
+	orion5x_uart0_init();
+	orion5x_xor_init();
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    RD88F5182_NOR_BOOT_BASE,
+				    RD88F5182_NOR_BOOT_SIZE);
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_TARGET(1),
+				    ORION_MBUS_DEVBUS_ATTR(1),
+				    RD88F5182_NOR_BASE,
+				    RD88F5182_NOR_SIZE);
+	platform_device_register(&rd88f5182_nor_flash);
+	platform_device_register(&rd88f5182_gpio_leds);
+
+	i2c_register_board_info(0, &rd88f5182_i2c_rtc, 1);
+}
+
+MACHINE_START(RD88F5182, "Marvell Orion-NAS Reference Design")
+	/* Maintainer: Ronen Shitrit <rshitrit@marvell.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= rd88f5182_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
new file mode 100644
index 000000000..93f74fd6b
--- /dev/null
+++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/rd88f6183-ap-ge-setup.c
+ *
+ * Marvell Orion-1-90 AP GE Reference Design Setup
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+#include <linux/ethtool.h>
+#include <linux/platform_data/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include "common.h"
+#include "orion5x.h"
+
+static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = {
+	.phy_addr	= -1,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data rd88f6183ap_ge_switch_chip_data = {
+	.port_names[0]	= "lan1",
+	.port_names[1]	= "lan2",
+	.port_names[2]	= "lan3",
+	.port_names[3]	= "lan4",
+	.port_names[4]	= "wan",
+	.port_names[5]	= "cpu",
+};
+
+static struct mtd_partition rd88f6183ap_ge_partitions[] = {
+	{
+		.name	= "kernel",
+		.offset	= 0x00000000,
+		.size	= 0x00200000,
+	}, {
+		.name	= "rootfs",
+		.offset	= 0x00200000,
+		.size	= 0x00500000,
+	}, {
+		.name	= "nvram",
+		.offset	= 0x00700000,
+		.size	= 0x00080000,
+	},
+};
+
+static struct flash_platform_data rd88f6183ap_ge_spi_slave_data = {
+	.type		= "m25p64",
+	.nr_parts	= ARRAY_SIZE(rd88f6183ap_ge_partitions),
+	.parts		= rd88f6183ap_ge_partitions,
+};
+
+static struct spi_board_info __initdata rd88f6183ap_ge_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &rd88f6183ap_ge_spi_slave_data,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+static void __init rd88f6183ap_ge_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&rd88f6183ap_ge_eth_data);
+	orion5x_eth_switch_init(&rd88f6183ap_ge_switch_chip_data);
+	spi_register_board_info(rd88f6183ap_ge_spi_slave_info,
+				ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info));
+	orion5x_spi_init();
+	orion5x_uart0_init();
+}
+
+static struct hw_pci rd88f6183ap_ge_pci __initdata = {
+	.nr_controllers	= 2,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= orion5x_pci_map_irq,
+};
+
+static int __init rd88f6183ap_ge_pci_init(void)
+{
+	if (machine_is_rd88f6183ap_ge()) {
+		orion5x_pci_disable();
+		pci_common_init(&rd88f6183ap_ge_pci);
+	}
+
+	return 0;
+}
+subsys_initcall(rd88f6183ap_ge_pci_init);
+
+MACHINE_START(RD88F6183AP_GE, "Marvell Orion-1-90 AP GE Reference Design")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= rd88f6183ap_ge_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
new file mode 100644
index 000000000..23a5521c6
--- /dev/null
+++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Buffalo Terastation Pro II/Live Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@googlemail.com>
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+
+/*****************************************************************************
+ * Terastation Pro 2/Live Info
+ ****************************************************************************/
+
+/*
+ * Terastation Pro 2 hardware :
+ * - Marvell 88F5281-D0
+ * - Marvell 88SX6042 SATA controller (PCI)
+ * - Marvell 88E1118 Gigabit Ethernet PHY
+ * - 256KB NOR flash
+ * - 128MB of DDR RAM
+ * - PCIe port (not equipped)
+ */
+
+/*
+ * 256K NOR flash Device bus boot chip select
+ */
+
+#define TSP2_NOR_BOOT_BASE	0xf4000000
+#define TSP2_NOR_BOOT_SIZE	SZ_256K
+
+/*****************************************************************************
+ * 256KB NOR Flash on BOOT Device
+ ****************************************************************************/
+
+static struct physmap_flash_data tsp2_nor_flash_data = {
+	.width    = 1,
+};
+
+static struct resource tsp2_nor_flash_resource = {
+	.flags = IORESOURCE_MEM,
+	.start = TSP2_NOR_BOOT_BASE,
+	.end   = TSP2_NOR_BOOT_BASE + TSP2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device tsp2_nor_flash = {
+	.name          = "physmap-flash",
+	.id            = 0,
+	.dev           = {
+		.platform_data	= &tsp2_nor_flash_data,
+	},
+	.num_resources = 1,
+	.resource      = &tsp2_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+#define TSP2_PCI_SLOT0_OFFS		7
+#define TSP2_PCI_SLOT0_IRQ_PIN		11
+
+static void __init tsp2_pci_preinit(void)
+{
+	int pin;
+
+	/*
+	 * Configure PCI GPIO IRQ pins
+	 */
+	pin = TSP2_PCI_SLOT0_IRQ_PIN;
+	if (gpio_request(pin, "PCI Int1") == 0) {
+		if (gpio_direction_input(pin) == 0) {
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+		} else {
+			printk(KERN_ERR "tsp2_pci_preinit failed "
+					"to set_irq_type pin %d\n", pin);
+			gpio_free(pin);
+		}
+	} else {
+		printk(KERN_ERR "tsp2_pci_preinit failed to "
+				"gpio_request %d\n", pin);
+	}
+}
+
+static int __init tsp2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * PCI IRQs are connected via GPIOs.
+	 */
+	if (slot == TSP2_PCI_SLOT0_OFFS)
+		return gpio_to_irq(TSP2_PCI_SLOT0_IRQ_PIN);
+
+	return -1;
+}
+
+static struct hw_pci tsp2_pci __initdata = {
+	.nr_controllers = 2,
+	.preinit        = tsp2_pci_preinit,
+	.setup          = orion5x_pci_sys_setup,
+	.scan           = orion5x_pci_sys_scan_bus,
+	.map_irq        = tsp2_pci_map_irq,
+};
+
+static int __init tsp2_pci_init(void)
+{
+	if (machine_is_terastation_pro2())
+		pci_common_init(&tsp2_pci);
+
+	return 0;
+}
+
+subsys_initcall(tsp2_pci_init);
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data tsp2_eth_data = {
+	.phy_addr	= 0,
+};
+
+/*****************************************************************************
+ * RTC 5C372a on I2C bus
+ ****************************************************************************/
+
+#define TSP2_RTC_GPIO	9
+
+static struct i2c_board_info __initdata tsp2_i2c_rtc = {
+	I2C_BOARD_INFO("rs5c372a", 0x32),
+};
+
+/*****************************************************************************
+ * Terastation Pro II specific power off method via UART1-attached
+ * microcontroller
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+static int tsp2_miconread(unsigned char *buf, int count)
+{
+	int i;
+	int timeout;
+
+	for (i = 0; i < count; i++) {
+		timeout = 10;
+
+		while (!(readl(UART1_REG(LSR)) & UART_LSR_DR)) {
+			if (--timeout == 0)
+				break;
+			udelay(1000);
+		}
+
+		if (timeout == 0)
+			break;
+		buf[i] = readl(UART1_REG(RX));
+	}
+
+	/* return read bytes */
+	return i;
+}
+
+static int tsp2_miconwrite(const unsigned char *buf, int count)
+{
+	int i = 0;
+
+	while (count--) {
+		while (!(readl(UART1_REG(LSR)) & UART_LSR_THRE))
+			barrier();
+		writel(buf[i++], UART1_REG(TX));
+	}
+
+	return 0;
+}
+
+static int tsp2_miconsend(const unsigned char *data, int count)
+{
+	int i;
+	unsigned char checksum = 0;
+	unsigned char recv_buf[40];
+	unsigned char send_buf[40];
+	unsigned char correct_ack[3];
+	int retry = 2;
+
+	/* Generate checksum */
+	for (i = 0; i < count; i++)
+		checksum -=  data[i];
+
+	do {
+		/* Send data */
+		tsp2_miconwrite(data, count);
+
+		/* send checksum */
+		tsp2_miconwrite(&checksum, 1);
+
+		if (tsp2_miconread(recv_buf, sizeof(recv_buf)) <= 3) {
+			printk(KERN_ERR ">%s: receive failed.\n", __func__);
+
+			/* send preamble to clear the receive buffer */
+			memset(&send_buf, 0xff, sizeof(send_buf));
+			tsp2_miconwrite(send_buf, sizeof(send_buf));
+
+			/* make dummy reads */
+			mdelay(100);
+			tsp2_miconread(recv_buf, sizeof(recv_buf));
+		} else {
+			/* Generate expected ack */
+			correct_ack[0] = 0x01;
+			correct_ack[1] = data[1];
+			correct_ack[2] = 0x00;
+
+			/* checksum Check */
+			if ((recv_buf[0] + recv_buf[1] + recv_buf[2] +
+			     recv_buf[3]) & 0xFF) {
+				printk(KERN_ERR ">%s: Checksum Error : "
+					"Received data[%02x, %02x, %02x, %02x]"
+					"\n", __func__, recv_buf[0],
+					recv_buf[1], recv_buf[2], recv_buf[3]);
+			} else {
+				/* Check Received Data */
+				if (correct_ack[0] == recv_buf[0] &&
+				    correct_ack[1] == recv_buf[1] &&
+				    correct_ack[2] == recv_buf[2]) {
+					/* Interval for next command */
+					mdelay(10);
+
+					/* Receive ACK */
+					return 0;
+				}
+			}
+			/* Received NAK or illegal Data */
+			printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
+					"Received\n", __func__);
+		}
+	} while (retry--);
+
+	/* Interval for next command */
+	mdelay(10);
+
+	return -1;
+}
+
+static void tsp2_power_off(void)
+{
+	const unsigned char watchdogkill[]	= {0x01, 0x35, 0x00};
+	const unsigned char shutdownwait[]	= {0x00, 0x0c};
+	const unsigned char poweroff[]		= {0x00, 0x06};
+	/* 38400 baud divisor */
+	const unsigned divisor = ((orion5x_tclk + (8 * 38400)) / (16 * 38400));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack uart1 and reset into sane state (38400,8n1,even parity) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x1b, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x07, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* Send the commands to shutdown the Terastation Pro II */
+	tsp2_miconsend(watchdogkill, sizeof(watchdogkill)) ;
+	tsp2_miconsend(shutdownwait, sizeof(shutdownwait)) ;
+	tsp2_miconsend(poweroff, sizeof(poweroff));
+}
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int tsp2_mpp_modes[] __initdata = {
+	MPP0_PCIE_RST_OUTn,
+	MPP1_UNUSED,
+	MPP2_UNUSED,
+	MPP3_UNUSED,
+	MPP4_NAND,		/* BOOT NAND Flash REn */
+	MPP5_NAND,		/* BOOT NAND Flash WEn */
+	MPP6_NAND,		/* BOOT NAND Flash HREn[0] */
+	MPP7_NAND,		/* BOOT NAND Flash WEn[0] */
+	MPP8_GPIO,		/* MICON int */
+	MPP9_GPIO,		/* RTC int */
+	MPP10_UNUSED,
+	MPP11_GPIO,		/* PCI Int A */
+	MPP12_UNUSED,
+	MPP13_GPIO,		/* UPS on UART0 enable */
+	MPP14_GPIO,		/* UPS low battery detection */
+	MPP15_UNUSED,
+	MPP16_UART,		/* UART1 RXD */
+	MPP17_UART,		/* UART1 TXD */
+	MPP18_UART,		/* UART1 CTSn */
+	MPP19_UART,		/* UART1 RTSn */
+	0,
+};
+
+static void __init tsp2_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(tsp2_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    TSP2_NOR_BOOT_BASE,
+				    TSP2_NOR_BOOT_SIZE);
+	platform_device_register(&tsp2_nor_flash);
+
+	orion5x_ehci0_init();
+	orion5x_eth_init(&tsp2_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+	orion5x_uart1_init();
+
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(TSP2_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(TSP2_RTC_GPIO) == 0)
+			tsp2_i2c_rtc.irq = gpio_to_irq(TSP2_RTC_GPIO);
+		else
+			gpio_free(TSP2_RTC_GPIO);
+	}
+	if (tsp2_i2c_rtc.irq == 0)
+		pr_warn("tsp2_init: failed to get RTC IRQ\n");
+	i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
+
+	/* register Terastation Pro II specific power-off method */
+	pm_power_off = tsp2_power_off;
+}
+
+MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
+	/* Maintainer:  Sylver Bruneau <sylver.bruneau@googlemail.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= tsp2_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
new file mode 100644
index 000000000..bab8ba0e0
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts209-setup.c
@@ -0,0 +1,331 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * QNAP TS-109/TS-209 Board Setup
+ *
+ * Maintainer: Byron Bradley <byron.bbradley@gmail.com>
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <linux/ata_platform.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+#include "tsx09-common.h"
+
+#define QNAP_TS209_NOR_BOOT_BASE 0xf4000000
+#define QNAP_TS209_NOR_BOOT_SIZE SZ_8M
+
+/****************************************************************************
+ * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatibility with
+ *     existing QNAP firmware.
+ *
+ * Layout as used by QNAP:
+ *  [2] 0x00000000-0x00200000 : "Kernel"
+ *  [3] 0x00200000-0x00600000 : "RootFS1"
+ *  [4] 0x00600000-0x00700000 : "RootFS2"
+ *  [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
+ *  [5] 0x00760000-0x00780000 : "U-Boot Config"
+ *  [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
+ ***************************************************************************/
+static struct mtd_partition qnap_ts209_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.size		= 0x00080000,
+		.offset		= 0x00780000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.size		= 0x00200000,
+		.offset		= 0,
+	}, {
+		.name		= "RootFS1",
+		.size		= 0x00400000,
+		.offset		= 0x00200000,
+	}, {
+		.name		= "RootFS2",
+		.size		= 0x00100000,
+		.offset		= 0x00600000,
+	}, {
+		.name		= "U-Boot Config",
+		.size		= 0x00020000,
+		.offset		= 0x00760000,
+	}, {
+		.name		= "NAS Config",
+		.size		= 0x00060000,
+		.offset		= 0x00700000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data qnap_ts209_nor_flash_data = {
+	.width		= 1,
+	.parts		= qnap_ts209_partitions,
+	.nr_parts	= ARRAY_SIZE(qnap_ts209_partitions)
+};
+
+static struct resource qnap_ts209_nor_flash_resource = {
+	.flags	= IORESOURCE_MEM,
+	.start	= QNAP_TS209_NOR_BOOT_BASE,
+	.end	= QNAP_TS209_NOR_BOOT_BASE + QNAP_TS209_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device qnap_ts209_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts209_nor_flash_data,
+	},
+	.resource	= &qnap_ts209_nor_flash_resource,
+	.num_resources	= 1,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+#define QNAP_TS209_PCI_SLOT0_OFFS	7
+#define QNAP_TS209_PCI_SLOT0_IRQ_PIN	6
+#define QNAP_TS209_PCI_SLOT1_IRQ_PIN	7
+
+static void __init qnap_ts209_pci_preinit(void)
+{
+	int pin;
+
+	/*
+	 * Configure PCI GPIO IRQ pins
+	 */
+	pin = QNAP_TS209_PCI_SLOT0_IRQ_PIN;
+	if (gpio_request(pin, "PCI Int1") == 0) {
+		if (gpio_direction_input(pin) == 0) {
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+		} else {
+			printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
+					"set_irq_type pin %d\n", pin);
+			gpio_free(pin);
+		}
+	} else {
+		printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
+				"%d\n", pin);
+	}
+
+	pin = QNAP_TS209_PCI_SLOT1_IRQ_PIN;
+	if (gpio_request(pin, "PCI Int2") == 0) {
+		if (gpio_direction_input(pin) == 0) {
+			irq_set_irq_type(gpio_to_irq(pin), IRQ_TYPE_LEVEL_LOW);
+		} else {
+			printk(KERN_ERR "qnap_ts209_pci_preinit failed "
+					"to set_irq_type pin %d\n", pin);
+			gpio_free(pin);
+		}
+	} else {
+		printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
+				"%d\n", pin);
+	}
+}
+
+static int __init qnap_ts209_pci_map_irq(const struct pci_dev *dev, u8 slot,
+	u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * PCI IRQs are connected via GPIOs.
+	 */
+	switch (slot - QNAP_TS209_PCI_SLOT0_OFFS) {
+	case 0:
+		return gpio_to_irq(QNAP_TS209_PCI_SLOT0_IRQ_PIN);
+	case 1:
+		return gpio_to_irq(QNAP_TS209_PCI_SLOT1_IRQ_PIN);
+	default:
+		return -1;
+	}
+}
+
+static struct hw_pci qnap_ts209_pci __initdata = {
+	.nr_controllers	= 2,
+	.preinit	= qnap_ts209_pci_preinit,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= qnap_ts209_pci_map_irq,
+};
+
+static int __init qnap_ts209_pci_init(void)
+{
+	if (machine_is_ts209())
+		pci_common_init(&qnap_ts209_pci);
+
+	return 0;
+}
+
+subsys_initcall(qnap_ts209_pci_init);
+
+/*****************************************************************************
+ * RTC S35390A on I2C bus
+ ****************************************************************************/
+
+#define TS209_RTC_GPIO	3
+
+static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+	.irq	= 0,
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ *     Power button is attached to the PIC microcontroller
+ ****************************************************************************/
+
+#define QNAP_TS209_GPIO_KEY_MEDIA	1
+#define QNAP_TS209_GPIO_KEY_RESET	2
+
+static struct gpio_keys_button qnap_ts209_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= QNAP_TS209_GPIO_KEY_MEDIA,
+		.desc		= "USB Copy Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_RESTART,
+		.gpio		= QNAP_TS209_GPIO_KEY_RESET,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qnap_ts209_button_data = {
+	.buttons	= qnap_ts209_buttons,
+	.nbuttons	= ARRAY_SIZE(qnap_ts209_buttons),
+};
+
+static struct platform_device qnap_ts209_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts209_button_data,
+	},
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data qnap_ts209_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+
+ * General Setup
+ ****************************************************************************/
+static unsigned int ts209_mpp_modes[] __initdata = {
+	MPP0_UNUSED,
+	MPP1_GPIO,		/* USB copy button */
+	MPP2_GPIO,		/* Load defaults button */
+	MPP3_GPIO,		/* GPIO RTC */
+	MPP4_UNUSED,
+	MPP5_UNUSED,
+	MPP6_GPIO,		/* PCI Int A */
+	MPP7_GPIO,		/* PCI Int B */
+	MPP8_UNUSED,
+	MPP9_UNUSED,
+	MPP10_UNUSED,
+	MPP11_UNUSED,
+	MPP12_SATA_LED,		/* SATA 0 presence */
+	MPP13_SATA_LED,		/* SATA 1 presence */
+	MPP14_SATA_LED,		/* SATA 0 active */
+	MPP15_SATA_LED,		/* SATA 1 active */
+	MPP16_UART,		/* UART1 RXD */
+	MPP17_UART,		/* UART1 TXD */
+	MPP18_GPIO,		/* SW_RST */
+	MPP19_UNUSED,
+	0,
+};
+
+static void __init qnap_ts209_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(ts209_mpp_modes);
+
+	/*
+	 * MPP[20] PCI clock 0
+	 * MPP[21] PCI clock 1
+	 * MPP[22] USB 0 over current
+	 * MPP[23-25] Reserved
+	 */
+
+	/*
+	 * Configure peripherals.
+	 */
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    QNAP_TS209_NOR_BOOT_BASE,
+				    QNAP_TS209_NOR_BOOT_SIZE);
+	platform_device_register(&qnap_ts209_nor_flash);
+
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	qnap_tsx09_find_mac_addr(QNAP_TS209_NOR_BOOT_BASE +
+				 qnap_ts209_partitions[5].offset,
+				 qnap_ts209_partitions[5].size);
+	orion5x_eth_init(&qnap_tsx09_eth_data);
+	orion5x_i2c_init();
+	orion5x_sata_init(&qnap_ts209_sata_data);
+	orion5x_uart0_init();
+	orion5x_uart1_init();
+	orion5x_xor_init();
+
+	platform_device_register(&qnap_ts209_button_device);
+
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(TS209_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(TS209_RTC_GPIO) == 0)
+			qnap_ts209_i2c_rtc.irq = gpio_to_irq(TS209_RTC_GPIO);
+		else
+			gpio_free(TS209_RTC_GPIO);
+	}
+	if (qnap_ts209_i2c_rtc.irq == 0)
+		pr_warn("qnap_ts209_init: failed to get RTC IRQ\n");
+	i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
+
+	/* register tsx09 specific power-off method */
+	pm_power_off = qnap_tsx09_power_off;
+}
+
+MACHINE_START(TS209, "QNAP TS-109/TS-209")
+	/* Maintainer: Byron Bradley <byron.bbradley@gmail.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= qnap_ts209_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
new file mode 100644
index 000000000..6f60dc1df
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts409-setup.c
@@ -0,0 +1,320 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * QNAP TS-409 Board Setup
+ *
+ * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com>
+ *
+ * Copyright (C) 2008  Sylver Bruneau <sylver.bruneau@gmail.com>
+ * Copyright (C) 2008  Martin Michlmayr <tbm@cyrius.com>
+ */
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/serial_reg.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+#include "tsx09-common.h"
+
+/*****************************************************************************
+ * QNAP TS-409 Info
+ ****************************************************************************/
+
+/*
+ * QNAP TS-409 hardware :
+ * - Marvell 88F5281-D0
+ * - Marvell 88SX7042 SATA controller (PCIe)
+ * - Marvell 88E1118 Gigabit Ethernet PHY
+ * - RTC S35390A (@0x30) on I2C bus
+ * - 8MB NOR flash
+ * - 256MB of DDR-2 RAM
+ */
+
+/*
+ * 8MB NOR flash Device bus boot chip select
+ */
+
+#define QNAP_TS409_NOR_BOOT_BASE 0xff800000
+#define QNAP_TS409_NOR_BOOT_SIZE SZ_8M
+
+/****************************************************************************
+ * 8MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatibility with
+ *     existing QNAP firmware.
+ *
+ * Layout as used by QNAP:
+ *  [2] 0x00000000-0x00200000 : "Kernel"
+ *  [3] 0x00200000-0x00600000 : "RootFS1"
+ *  [4] 0x00600000-0x00700000 : "RootFS2"
+ *  [6] 0x00700000-0x00760000 : "NAS Config" (read-only)
+ *  [5] 0x00760000-0x00780000 : "U-Boot Config"
+ *  [1] 0x00780000-0x00800000 : "U-Boot" (read-only)
+ ***************************************************************************/
+static struct mtd_partition qnap_ts409_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.size		= 0x00080000,
+		.offset		= 0x00780000,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.size		= 0x00200000,
+		.offset		= 0,
+	}, {
+		.name		= "RootFS1",
+		.size		= 0x00400000,
+		.offset		= 0x00200000,
+	}, {
+		.name		= "RootFS2",
+		.size		= 0x00100000,
+		.offset		= 0x00600000,
+	}, {
+		.name		= "U-Boot Config",
+		.size		= 0x00020000,
+		.offset		= 0x00760000,
+	}, {
+		.name		= "NAS Config",
+		.size		= 0x00060000,
+		.offset		= 0x00700000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+
+static struct physmap_flash_data qnap_ts409_nor_flash_data = {
+	.width		= 1,
+	.parts		= qnap_ts409_partitions,
+	.nr_parts	= ARRAY_SIZE(qnap_ts409_partitions)
+};
+
+static struct resource qnap_ts409_nor_flash_resource = {
+	.flags	= IORESOURCE_MEM,
+	.start	= QNAP_TS409_NOR_BOOT_BASE,
+	.end	= QNAP_TS409_NOR_BOOT_BASE + QNAP_TS409_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device qnap_ts409_nor_flash = {
+	.name		= "physmap-flash",
+	.id		= 0,
+	.dev		= { .platform_data = &qnap_ts409_nor_flash_data, },
+	.num_resources	= 1,
+	.resource	= &qnap_ts409_nor_flash_resource,
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+
+static int __init qnap_ts409_pci_map_irq(const struct pci_dev *dev, u8 slot,
+	u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * PCI isn't used on the TS-409
+	 */
+	return -1;
+}
+
+static struct hw_pci qnap_ts409_pci __initdata = {
+	.nr_controllers	= 2,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= qnap_ts409_pci_map_irq,
+};
+
+static int __init qnap_ts409_pci_init(void)
+{
+	if (machine_is_ts409())
+		pci_common_init(&qnap_ts409_pci);
+
+	return 0;
+}
+
+subsys_initcall(qnap_ts409_pci_init);
+
+/*****************************************************************************
+ * RTC S35390A on I2C bus
+ ****************************************************************************/
+
+#define TS409_RTC_GPIO	10
+
+static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/*****************************************************************************
+ * LEDs attached to GPIO
+ ****************************************************************************/
+
+static struct gpio_led ts409_led_pins[] = {
+	{
+		.name		= "ts409:red:sata1",
+		.gpio		= 4,
+		.active_low	= 1,
+	}, {
+		.name		= "ts409:red:sata2",
+		.gpio		= 5,
+		.active_low	= 1,
+	}, {
+		.name		= "ts409:red:sata3",
+		.gpio		= 6,
+		.active_low	= 1,
+	}, {
+		.name		= "ts409:red:sata4",
+		.gpio		= 7,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led_platform_data ts409_led_data = {
+	.leds		= ts409_led_pins,
+	.num_leds	= ARRAY_SIZE(ts409_led_pins),
+};
+
+static struct platform_device ts409_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &ts409_led_data,
+	},
+};
+
+/****************************************************************************
+ * GPIO Attached Keys
+ *     Power button is attached to the PIC microcontroller
+ ****************************************************************************/
+
+#define QNAP_TS409_GPIO_KEY_RESET	14
+#define QNAP_TS409_GPIO_KEY_MEDIA	15
+
+static struct gpio_keys_button qnap_ts409_buttons[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= QNAP_TS409_GPIO_KEY_RESET,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_COPY,
+		.gpio		= QNAP_TS409_GPIO_KEY_MEDIA,
+		.desc		= "USB Copy Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qnap_ts409_button_data = {
+	.buttons	= qnap_ts409_buttons,
+	.nbuttons	= ARRAY_SIZE(qnap_ts409_buttons),
+};
+
+static struct platform_device qnap_ts409_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts409_button_data,
+	},
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int ts409_mpp_modes[] __initdata = {
+	MPP0_UNUSED,
+	MPP1_UNUSED,
+	MPP2_UNUSED,
+	MPP3_UNUSED,
+	MPP4_GPIO,		/* HDD 1 status */
+	MPP5_GPIO,		/* HDD 2 status */
+	MPP6_GPIO,		/* HDD 3 status */
+	MPP7_GPIO,		/* HDD 4 status */
+	MPP8_UNUSED,
+	MPP9_UNUSED,
+	MPP10_GPIO,		/* RTC int */
+	MPP11_UNUSED,
+	MPP12_UNUSED,
+	MPP13_UNUSED,
+	MPP14_GPIO,		/* SW_RST */
+	MPP15_GPIO,		/* USB copy button */
+	MPP16_UART,		/* UART1 RXD */
+	MPP17_UART,		/* UART1 TXD */
+	MPP18_UNUSED,
+	MPP19_UNUSED,
+	0,
+};
+
+static void __init qnap_ts409_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(ts409_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    QNAP_TS409_NOR_BOOT_BASE,
+				    QNAP_TS409_NOR_BOOT_SIZE);
+	platform_device_register(&qnap_ts409_nor_flash);
+
+	orion5x_ehci0_init();
+	qnap_tsx09_find_mac_addr(QNAP_TS409_NOR_BOOT_BASE +
+				 qnap_ts409_partitions[5].offset,
+				 qnap_ts409_partitions[5].size);
+	orion5x_eth_init(&qnap_tsx09_eth_data);
+	orion5x_i2c_init();
+	orion5x_uart0_init();
+	orion5x_uart1_init();
+
+	platform_device_register(&qnap_ts409_button_device);
+
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(TS409_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(TS409_RTC_GPIO) == 0)
+			qnap_ts409_i2c_rtc.irq = gpio_to_irq(TS409_RTC_GPIO);
+		else
+			gpio_free(TS409_RTC_GPIO);
+	}
+	if (qnap_ts409_i2c_rtc.irq == 0)
+		pr_warn("qnap_ts409_init: failed to get RTC IRQ\n");
+	i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1);
+	platform_device_register(&ts409_leds);
+
+	/* register tsx09 specific power-off method */
+	pm_power_off = qnap_tsx09_power_off;
+}
+
+MACHINE_START(TS409, "QNAP TS-409")
+	/* Maintainer:  Sylver Bruneau <sylver.bruneau@gmail.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= qnap_ts409_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/ts78xx-fpga.h b/arch/arm/mach-orion5x/ts78xx-fpga.h
new file mode 100644
index 000000000..2f4fe3ca5
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts78xx-fpga.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#define TS7800_FPGA_MAGIC 0x00b480
+#define FPGAID(_magic, _rev) ((_magic << 8) + _rev)
+
+/*
+ * get yer id's from http://ts78xx.digriz.org.uk/
+ * do *not* make up your own or 'borrow' any!
+ */
+enum fpga_ids {
+	/* Technologic Systems */
+	TS7800_REV_1	= FPGAID(TS7800_FPGA_MAGIC, 0x01),
+	TS7800_REV_2	= FPGAID(TS7800_FPGA_MAGIC, 0x02),
+	TS7800_REV_3	= FPGAID(TS7800_FPGA_MAGIC, 0x03),
+	TS7800_REV_4	= FPGAID(TS7800_FPGA_MAGIC, 0x04),
+	TS7800_REV_5	= FPGAID(TS7800_FPGA_MAGIC, 0x05),
+	TS7800_REV_6	= FPGAID(TS7800_FPGA_MAGIC, 0x06),
+	TS7800_REV_7	= FPGAID(TS7800_FPGA_MAGIC, 0x07),
+	TS7800_REV_8	= FPGAID(TS7800_FPGA_MAGIC, 0x08),
+	TS7800_REV_9	= FPGAID(TS7800_FPGA_MAGIC, 0x09),
+
+	/* Unaffordable & Expensive */
+	UAE_DUMMY	= FPGAID(0xffffff, 0x01),
+};
+
+struct fpga_device {
+	unsigned		present:1;
+	unsigned		init:1;
+};
+
+struct fpga_devices {
+	/* Technologic Systems */
+	struct fpga_device	ts_rtc;
+	struct fpga_device	ts_nand;
+	struct fpga_device	ts_rng;
+};
+
+struct ts78xx_fpga_data {
+	unsigned int		id;
+	int			state;
+
+	struct fpga_devices	supports;
+};
diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c
new file mode 100644
index 000000000..af810e7cc
--- /dev/null
+++ b/arch/arm/mach-orion5x/ts78xx-setup.c
@@ -0,0 +1,574 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * arch/arm/mach-orion5x/ts78xx-setup.c
+ *
+ * Maintainer: Alexander Clouter <alex@digriz.org.uk>
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sysfs.h>
+#include <linux/platform_device.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/platnand.h>
+#include <linux/timeriomem-rng.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include "common.h"
+#include "mpp.h"
+#include "orion5x.h"
+#include "ts78xx-fpga.h"
+
+/*****************************************************************************
+ * TS-78xx Info
+ ****************************************************************************/
+
+/*
+ * FPGA - lives where the PCI bus would be at ORION5X_PCI_MEM_PHYS_BASE
+ */
+#define TS78XX_FPGA_REGS_PHYS_BASE	0xe8000000
+#define TS78XX_FPGA_REGS_VIRT_BASE	IOMEM(0xff900000)
+#define TS78XX_FPGA_REGS_SIZE		SZ_1M
+
+static struct ts78xx_fpga_data ts78xx_fpga = {
+	.id		= 0,
+	.state		= 1,
+/*	.supports	= ... - populated by ts78xx_fpga_supports() */
+};
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc ts78xx_io_desc[] __initdata = {
+	{
+		.virtual	= (unsigned long)TS78XX_FPGA_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(TS78XX_FPGA_REGS_PHYS_BASE),
+		.length		= TS78XX_FPGA_REGS_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+static void __init ts78xx_map_io(void)
+{
+	orion5x_map_io();
+	iotable_init(ts78xx_io_desc, ARRAY_SIZE(ts78xx_io_desc));
+}
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+static struct mv643xx_eth_platform_data ts78xx_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct mv_sata_platform_data ts78xx_sata_data = {
+	.n_ports	= 2,
+};
+
+/*****************************************************************************
+ * RTC M48T86 - nicked^Wborrowed from arch/arm/mach-ep93xx/ts72xx.c
+ ****************************************************************************/
+#define TS_RTC_CTRL	(TS78XX_FPGA_REGS_PHYS_BASE + 0x808)
+#define TS_RTC_DATA	(TS78XX_FPGA_REGS_PHYS_BASE + 0x80c)
+
+static struct resource ts78xx_ts_rtc_resources[] = {
+	DEFINE_RES_MEM(TS_RTC_CTRL, 0x01),
+	DEFINE_RES_MEM(TS_RTC_DATA, 0x01),
+};
+
+static struct platform_device ts78xx_ts_rtc_device = {
+	.name		= "rtc-m48t86",
+	.id		= -1,
+	.resource	= ts78xx_ts_rtc_resources,
+	.num_resources 	= ARRAY_SIZE(ts78xx_ts_rtc_resources),
+};
+
+static int ts78xx_ts_rtc_load(void)
+{
+	int rc;
+
+	if (ts78xx_fpga.supports.ts_rtc.init == 0) {
+		rc = platform_device_register(&ts78xx_ts_rtc_device);
+		if (!rc)
+			ts78xx_fpga.supports.ts_rtc.init = 1;
+	} else {
+		rc = platform_device_add(&ts78xx_ts_rtc_device);
+	}
+
+	if (rc)
+		pr_info("RTC could not be registered: %d\n", rc);
+
+	return rc;
+}
+
+static void ts78xx_ts_rtc_unload(void)
+{
+	platform_device_del(&ts78xx_ts_rtc_device);
+}
+
+/*****************************************************************************
+ * NAND Flash
+ ****************************************************************************/
+#define TS_NAND_CTRL	(TS78XX_FPGA_REGS_VIRT_BASE + 0x800)	/* VIRT */
+#define TS_NAND_DATA	(TS78XX_FPGA_REGS_PHYS_BASE + 0x804)	/* PHYS */
+
+/*
+ * hardware specific access to control-lines
+ *
+ * ctrl:
+ * NAND_NCE: bit 0 -> bit 2
+ * NAND_CLE: bit 1 -> bit 1
+ * NAND_ALE: bit 2 -> bit 0
+ */
+static void ts78xx_ts_nand_cmd_ctrl(struct nand_chip *this, int cmd,
+				    unsigned int ctrl)
+{
+	if (ctrl & NAND_CTRL_CHANGE) {
+		unsigned char bits;
+
+		bits = (ctrl & NAND_NCE) << 2;
+		bits |= ctrl & NAND_CLE;
+		bits |= (ctrl & NAND_ALE) >> 2;
+
+		writeb((readb(TS_NAND_CTRL) & ~0x7) | bits, TS_NAND_CTRL);
+	}
+
+	if (cmd != NAND_CMD_NONE)
+		writeb(cmd, this->legacy.IO_ADDR_W);
+}
+
+static int ts78xx_ts_nand_dev_ready(struct nand_chip *chip)
+{
+	return readb(TS_NAND_CTRL) & 0x20;
+}
+
+static void ts78xx_ts_nand_write_buf(struct nand_chip *chip,
+				     const uint8_t *buf, int len)
+{
+	void __iomem *io_base = chip->legacy.IO_ADDR_W;
+	unsigned long off = ((unsigned long)buf & 3);
+	int sz;
+
+	if (off) {
+		sz = min_t(int, 4 - off, len);
+		writesb(io_base, buf, sz);
+		buf += sz;
+		len -= sz;
+	}
+
+	sz = len >> 2;
+	if (sz) {
+		u32 *buf32 = (u32 *)buf;
+		writesl(io_base, buf32, sz);
+		buf += sz << 2;
+		len -= sz << 2;
+	}
+
+	if (len)
+		writesb(io_base, buf, len);
+}
+
+static void ts78xx_ts_nand_read_buf(struct nand_chip *chip,
+				    uint8_t *buf, int len)
+{
+	void __iomem *io_base = chip->legacy.IO_ADDR_R;
+	unsigned long off = ((unsigned long)buf & 3);
+	int sz;
+
+	if (off) {
+		sz = min_t(int, 4 - off, len);
+		readsb(io_base, buf, sz);
+		buf += sz;
+		len -= sz;
+	}
+
+	sz = len >> 2;
+	if (sz) {
+		u32 *buf32 = (u32 *)buf;
+		readsl(io_base, buf32, sz);
+		buf += sz << 2;
+		len -= sz << 2;
+	}
+
+	if (len)
+		readsb(io_base, buf, len);
+}
+
+static struct mtd_partition ts78xx_ts_nand_parts[] = {
+	{
+		.name		= "mbr",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+	}, {
+		.name		= "initrd",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+	}, {
+		.name		= "rootfs",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+	}
+};
+
+static struct platform_nand_data ts78xx_ts_nand_data = {
+	.chip	= {
+		.nr_chips		= 1,
+		.partitions		= ts78xx_ts_nand_parts,
+		.nr_partitions		= ARRAY_SIZE(ts78xx_ts_nand_parts),
+		.chip_delay		= 15,
+		.bbt_options		= NAND_BBT_USE_FLASH,
+	},
+	.ctrl	= {
+		/*
+		 * The HW ECC offloading functions, used to give about a 9%
+		 * performance increase for 'dd if=/dev/mtdblockX' and 5% for
+		 * nanddump.  This all however was changed by git commit
+		 * e6cf5df1838c28bb060ac45b5585e48e71bbc740 so now there is
+		 * no performance advantage to be had so we no longer bother
+		 */
+		.cmd_ctrl		= ts78xx_ts_nand_cmd_ctrl,
+		.dev_ready		= ts78xx_ts_nand_dev_ready,
+		.write_buf		= ts78xx_ts_nand_write_buf,
+		.read_buf		= ts78xx_ts_nand_read_buf,
+	},
+};
+
+static struct resource ts78xx_ts_nand_resources
+			= DEFINE_RES_MEM(TS_NAND_DATA, 4);
+
+static struct platform_device ts78xx_ts_nand_device = {
+	.name		= "gen_nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ts78xx_ts_nand_data,
+	},
+	.resource	= &ts78xx_ts_nand_resources,
+	.num_resources	= 1,
+};
+
+static int ts78xx_ts_nand_load(void)
+{
+	int rc;
+
+	if (ts78xx_fpga.supports.ts_nand.init == 0) {
+		rc = platform_device_register(&ts78xx_ts_nand_device);
+		if (!rc)
+			ts78xx_fpga.supports.ts_nand.init = 1;
+	} else
+		rc = platform_device_add(&ts78xx_ts_nand_device);
+
+	if (rc)
+		pr_info("NAND could not be registered: %d\n", rc);
+	return rc;
+};
+
+static void ts78xx_ts_nand_unload(void)
+{
+	platform_device_del(&ts78xx_ts_nand_device);
+}
+
+/*****************************************************************************
+ * HW RNG
+ ****************************************************************************/
+#define TS_RNG_DATA	(TS78XX_FPGA_REGS_PHYS_BASE | 0x044)
+
+static struct resource ts78xx_ts_rng_resource
+			= DEFINE_RES_MEM(TS_RNG_DATA, 4);
+
+static struct timeriomem_rng_data ts78xx_ts_rng_data = {
+	.period		= 1000000, /* one second */
+};
+
+static struct platform_device ts78xx_ts_rng_device = {
+	.name		= "timeriomem_rng",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &ts78xx_ts_rng_data,
+	},
+	.resource	= &ts78xx_ts_rng_resource,
+	.num_resources	= 1,
+};
+
+static int ts78xx_ts_rng_load(void)
+{
+	int rc;
+
+	if (ts78xx_fpga.supports.ts_rng.init == 0) {
+		rc = platform_device_register(&ts78xx_ts_rng_device);
+		if (!rc)
+			ts78xx_fpga.supports.ts_rng.init = 1;
+	} else
+		rc = platform_device_add(&ts78xx_ts_rng_device);
+
+	if (rc)
+		pr_info("RNG could not be registered: %d\n", rc);
+	return rc;
+};
+
+static void ts78xx_ts_rng_unload(void)
+{
+	platform_device_del(&ts78xx_ts_rng_device);
+}
+
+/*****************************************************************************
+ * FPGA 'hotplug' support code
+ ****************************************************************************/
+static void ts78xx_fpga_devices_zero_init(void)
+{
+	ts78xx_fpga.supports.ts_rtc.init = 0;
+	ts78xx_fpga.supports.ts_nand.init = 0;
+	ts78xx_fpga.supports.ts_rng.init = 0;
+}
+
+static void ts78xx_fpga_supports(void)
+{
+	/* TODO: put this 'table' into ts78xx-fpga.h */
+	switch (ts78xx_fpga.id) {
+	case TS7800_REV_1:
+	case TS7800_REV_2:
+	case TS7800_REV_3:
+	case TS7800_REV_4:
+	case TS7800_REV_5:
+	case TS7800_REV_6:
+	case TS7800_REV_7:
+	case TS7800_REV_8:
+	case TS7800_REV_9:
+		ts78xx_fpga.supports.ts_rtc.present = 1;
+		ts78xx_fpga.supports.ts_nand.present = 1;
+		ts78xx_fpga.supports.ts_rng.present = 1;
+		break;
+	default:
+		/* enable devices if magic matches */
+		switch ((ts78xx_fpga.id >> 8) & 0xffffff) {
+		case TS7800_FPGA_MAGIC:
+			pr_warn("unrecognised FPGA revision 0x%.2x\n",
+				ts78xx_fpga.id & 0xff);
+			ts78xx_fpga.supports.ts_rtc.present = 1;
+			ts78xx_fpga.supports.ts_nand.present = 1;
+			ts78xx_fpga.supports.ts_rng.present = 1;
+			break;
+		default:
+			ts78xx_fpga.supports.ts_rtc.present = 0;
+			ts78xx_fpga.supports.ts_nand.present = 0;
+			ts78xx_fpga.supports.ts_rng.present = 0;
+		}
+	}
+}
+
+static int ts78xx_fpga_load_devices(void)
+{
+	int tmp, ret = 0;
+
+	if (ts78xx_fpga.supports.ts_rtc.present == 1) {
+		tmp = ts78xx_ts_rtc_load();
+		if (tmp)
+			ts78xx_fpga.supports.ts_rtc.present = 0;
+		ret |= tmp;
+	}
+	if (ts78xx_fpga.supports.ts_nand.present == 1) {
+		tmp = ts78xx_ts_nand_load();
+		if (tmp)
+			ts78xx_fpga.supports.ts_nand.present = 0;
+		ret |= tmp;
+	}
+	if (ts78xx_fpga.supports.ts_rng.present == 1) {
+		tmp = ts78xx_ts_rng_load();
+		if (tmp)
+			ts78xx_fpga.supports.ts_rng.present = 0;
+		ret |= tmp;
+	}
+
+	return ret;
+}
+
+static int ts78xx_fpga_unload_devices(void)
+{
+
+	if (ts78xx_fpga.supports.ts_rtc.present == 1)
+		ts78xx_ts_rtc_unload();
+	if (ts78xx_fpga.supports.ts_nand.present == 1)
+		ts78xx_ts_nand_unload();
+	if (ts78xx_fpga.supports.ts_rng.present == 1)
+		ts78xx_ts_rng_unload();
+
+	return 0;
+}
+
+static int ts78xx_fpga_load(void)
+{
+	ts78xx_fpga.id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
+
+	pr_info("FPGA magic=0x%.6x, rev=0x%.2x\n",
+			(ts78xx_fpga.id >> 8) & 0xffffff,
+			ts78xx_fpga.id & 0xff);
+
+	ts78xx_fpga_supports();
+
+	if (ts78xx_fpga_load_devices()) {
+		ts78xx_fpga.state = -1;
+		return -EBUSY;
+	}
+
+	return 0;
+};
+
+static int ts78xx_fpga_unload(void)
+{
+	unsigned int fpga_id;
+
+	fpga_id = readl(TS78XX_FPGA_REGS_VIRT_BASE);
+
+	/*
+	 * There does not seem to be a feasible way to block access to the GPIO
+	 * pins from userspace (/dev/mem).  This if clause should hopefully warn
+	 * those foolish enough not to follow 'policy' :)
+	 *
+	 * UrJTAG SVN since r1381 can be used to reprogram the FPGA
+	 */
+	if (ts78xx_fpga.id != fpga_id) {
+		pr_err("FPGA magic/rev mismatch\n"
+			"TS-78xx FPGA: was 0x%.6x/%.2x but now 0x%.6x/%.2x\n",
+			(ts78xx_fpga.id >> 8) & 0xffffff, ts78xx_fpga.id & 0xff,
+			(fpga_id >> 8) & 0xffffff, fpga_id & 0xff);
+		ts78xx_fpga.state = -1;
+		return -EBUSY;
+	}
+
+	if (ts78xx_fpga_unload_devices()) {
+		ts78xx_fpga.state = -1;
+		return -EBUSY;
+	}
+
+	return 0;
+};
+
+static ssize_t ts78xx_fpga_show(struct kobject *kobj,
+			struct kobj_attribute *attr, char *buf)
+{
+	if (ts78xx_fpga.state < 0)
+		return sprintf(buf, "borked\n");
+
+	return sprintf(buf, "%s\n", (ts78xx_fpga.state) ? "online" : "offline");
+}
+
+static ssize_t ts78xx_fpga_store(struct kobject *kobj,
+			struct kobj_attribute *attr, const char *buf, size_t n)
+{
+	int value, ret;
+
+	if (ts78xx_fpga.state < 0) {
+		pr_err("FPGA borked, you must powercycle ASAP\n");
+		return -EBUSY;
+	}
+
+	if (strncmp(buf, "online", sizeof("online") - 1) == 0)
+		value = 1;
+	else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
+		value = 0;
+	else
+		return -EINVAL;
+
+	if (ts78xx_fpga.state == value)
+		return n;
+
+	ret = (ts78xx_fpga.state == 0)
+		? ts78xx_fpga_load()
+		: ts78xx_fpga_unload();
+
+	if (!(ret < 0))
+		ts78xx_fpga.state = value;
+
+	return n;
+}
+
+static struct kobj_attribute ts78xx_fpga_attr =
+	__ATTR(ts78xx_fpga, 0644, ts78xx_fpga_show, ts78xx_fpga_store);
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+static unsigned int ts78xx_mpp_modes[] __initdata = {
+	MPP0_UNUSED,
+	MPP1_GPIO,		/* JTAG Clock */
+	MPP2_GPIO,		/* JTAG Data In */
+	MPP3_GPIO,		/* Lat ECP2 256 FPGA - PB2B */
+	MPP4_GPIO,		/* JTAG Data Out */
+	MPP5_GPIO,		/* JTAG TMS */
+	MPP6_GPIO,		/* Lat ECP2 256 FPGA - PB31A_CLK4+ */
+	MPP7_GPIO,		/* Lat ECP2 256 FPGA - PB22B */
+	MPP8_UNUSED,
+	MPP9_UNUSED,
+	MPP10_UNUSED,
+	MPP11_UNUSED,
+	MPP12_UNUSED,
+	MPP13_UNUSED,
+	MPP14_UNUSED,
+	MPP15_UNUSED,
+	MPP16_UART,
+	MPP17_UART,
+	MPP18_UART,
+	MPP19_UART,
+	/*
+	 * MPP[20] PCI Clock Out 1
+	 * MPP[21] PCI Clock Out 0
+	 * MPP[22] Unused
+	 * MPP[23] Unused
+	 * MPP[24] Unused
+	 * MPP[25] Unused
+	 */
+	0,
+};
+
+static void __init ts78xx_init(void)
+{
+	int ret;
+
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(ts78xx_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_ehci1_init();
+	orion5x_eth_init(&ts78xx_eth_data);
+	orion5x_sata_init(&ts78xx_sata_data);
+	orion5x_uart0_init();
+	orion5x_uart1_init();
+	orion5x_xor_init();
+
+	/* FPGA init */
+	ts78xx_fpga_devices_zero_init();
+	ret = ts78xx_fpga_load();
+	ret = sysfs_create_file(firmware_kobj, &ts78xx_fpga_attr.attr);
+	if (ret)
+		pr_err("sysfs_create_file failed: %d\n", ret);
+}
+
+MACHINE_START(TS78XX, "Technologic Systems TS-78xx SBC")
+	/* Maintainer: Alexander Clouter <alex@digriz.org.uk> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= ts78xx_init,
+	.map_io		= ts78xx_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/tsx09-common.c b/arch/arm/mach-orion5x/tsx09-common.c
new file mode 100644
index 000000000..099e6fdfa
--- /dev/null
+++ b/arch/arm/mach-orion5x/tsx09-common.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * QNAP TS-x09 Boards common functions
+ *
+ * Maintainers: Lennert Buytenhek <buytenh@marvell.com>
+ *		Byron Bradley <byron.bbradley@gmail.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/timex.h>
+#include <linux/serial_reg.h>
+#include "orion5x.h"
+#include "tsx09-common.h"
+#include "common.h"
+
+/*****************************************************************************
+ * QNAP TS-x09 specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx09_power_off(void)
+{
+	/* 19200 baud divisor */
+	const unsigned divisor = ((orion5x_tclk + (8 * 19200)) / (16 * 19200));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack uart1 and reset into sane state (19200,8n1) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x03, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x00, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* send the power-off command 'A' to PIC */
+	writel('A', UART1_REG(TX));
+}
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+struct mv643xx_eth_platform_data qnap_tsx09_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static int __init qnap_tsx09_parse_hex_nibble(char n)
+{
+	if (n >= '0' && n <= '9')
+		return n - '0';
+
+	if (n >= 'A' && n <= 'F')
+		return n - 'A' + 10;
+
+	if (n >= 'a' && n <= 'f')
+		return n - 'a' + 10;
+
+	return -1;
+}
+
+static int __init qnap_tsx09_parse_hex_byte(const char *b)
+{
+	int hi;
+	int lo;
+
+	hi = qnap_tsx09_parse_hex_nibble(b[0]);
+	lo = qnap_tsx09_parse_hex_nibble(b[1]);
+
+	if (hi < 0 || lo < 0)
+		return -1;
+
+	return (hi << 4) | lo;
+}
+
+static int __init qnap_tsx09_check_mac_addr(const char *addr_str)
+{
+	u_int8_t addr[6];
+	int i;
+
+	for (i = 0; i < 6; i++) {
+		int byte;
+
+		/*
+		 * Enforce "xx:xx:xx:xx:xx:xx\n" format.
+		 */
+		if (addr_str[(i * 3) + 2] != ((i < 5) ? ':' : '\n'))
+			return -1;
+
+		byte = qnap_tsx09_parse_hex_byte(addr_str + (i * 3));
+		if (byte < 0)
+			return -1;
+		addr[i] = byte;
+	}
+
+	printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr);
+
+	memcpy(qnap_tsx09_eth_data.mac_addr, addr, 6);
+
+	return 0;
+}
+
+/*
+ * The 'NAS Config' flash partition has an ext2 filesystem which
+ * contains a file that has the ethernet MAC address in plain text
+ * (format "xx:xx:xx:xx:xx:xx\n").
+ */
+void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size)
+{
+	unsigned long addr;
+
+	for (addr = mem_base; addr < (mem_base + size); addr += 1024) {
+		char *nor_page;
+		int ret = 0;
+
+		nor_page = ioremap(addr, 1024);
+		if (nor_page != NULL) {
+			ret = qnap_tsx09_check_mac_addr(nor_page);
+			iounmap(nor_page);
+		}
+
+		if (ret == 0)
+			break;
+	}
+}
diff --git a/arch/arm/mach-orion5x/tsx09-common.h b/arch/arm/mach-orion5x/tsx09-common.h
new file mode 100644
index 000000000..72bedc6b8
--- /dev/null
+++ b/arch/arm/mach-orion5x/tsx09-common.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ARCH_ORION5X_TSX09_COMMON_H
+#define __ARCH_ORION5X_TSX09_COMMON_H
+
+/*
+ * QNAP TS-x09 Boards power-off function
+ */
+extern void qnap_tsx09_power_off(void);
+
+/*
+ * QNAP TS-x09 Boards function to find Ethernet MAC address in flash memory
+ */
+extern void __init qnap_tsx09_find_mac_addr(u32 mem_base, u32 size);
+
+/*
+ * QNAP TS-x09 Boards ethernet declaration
+ */
+extern struct mv643xx_eth_platform_data qnap_tsx09_eth_data;
+
+
+#endif
diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c
new file mode 100644
index 000000000..e5f327054
--- /dev/null
+++ b/arch/arm/mach-orion5x/wnr854t-setup.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// arch/arm/mach-orion5x/wnr854t-setup.c
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/platform_data/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include "orion5x.h"
+#include "common.h"
+#include "mpp.h"
+
+static unsigned int wnr854t_mpp_modes[] __initdata = {
+	MPP0_GPIO,		/* Power LED green (0=on) */
+	MPP1_GPIO,		/* Reset Button (0=off) */
+	MPP2_GPIO,		/* Power LED blink (0=off) */
+	MPP3_GPIO,		/* WAN Status LED amber (0=off) */
+	MPP4_GPIO,		/* PCI int */
+	MPP5_GPIO,		/* ??? */
+	MPP6_GPIO,		/* ??? */
+	MPP7_GPIO,		/* ??? */
+	MPP8_UNUSED,		/* ??? */
+	MPP9_GIGE,		/* GE_RXERR */
+	MPP10_UNUSED,		/* ??? */
+	MPP11_UNUSED,		/* ??? */
+	MPP12_GIGE,		/* GE_TXD[4] */
+	MPP13_GIGE,		/* GE_TXD[5] */
+	MPP14_GIGE,		/* GE_TXD[6] */
+	MPP15_GIGE,		/* GE_TXD[7] */
+	MPP16_GIGE,		/* GE_RXD[4] */
+	MPP17_GIGE,		/* GE_RXD[5] */
+	MPP18_GIGE,		/* GE_RXD[6] */
+	MPP19_GIGE,		/* GE_RXD[7] */
+	0,
+};
+
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define WNR854T_NOR_BOOT_BASE	0xf4000000
+#define WNR854T_NOR_BOOT_SIZE	SZ_8M
+
+static struct mtd_partition wnr854t_nor_flash_partitions[] = {
+	{
+		.name		= "kernel",
+		.offset		= 0x00000000,
+		.size		= 0x00100000,
+	}, {
+		.name		= "rootfs",
+		.offset		= 0x00100000,
+		.size		= 0x00660000,
+	}, {
+		.name		= "uboot",
+		.offset		= 0x00760000,
+		.size		= 0x00040000,
+	},
+};
+
+static struct physmap_flash_data wnr854t_nor_flash_data = {
+	.width		= 2,
+	.parts		= wnr854t_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(wnr854t_nor_flash_partitions),
+};
+
+static struct resource wnr854t_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= WNR854T_NOR_BOOT_BASE,
+	.end		= WNR854T_NOR_BOOT_BASE + WNR854T_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device wnr854t_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &wnr854t_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &wnr854t_nor_flash_resource,
+};
+
+static struct mv643xx_eth_platform_data wnr854t_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data wnr854t_switch_chip_data = {
+	.port_names[0] = "lan3",
+	.port_names[1] = "lan4",
+	.port_names[2] = "wan",
+	.port_names[3] = "cpu",
+	.port_names[5] = "lan1",
+	.port_names[7] = "lan2",
+};
+
+static void __init wnr854t_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(wnr854t_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_eth_init(&wnr854t_eth_data);
+	orion5x_eth_switch_init(&wnr854t_switch_chip_data);
+	orion5x_uart0_init();
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    WNR854T_NOR_BOOT_BASE,
+				    WNR854T_NOR_BOOT_SIZE);
+	platform_device_register(&wnr854t_nor_flash);
+}
+
+static int __init wnr854t_pci_map_irq(const struct pci_dev *dev, u8 slot,
+	u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * Mini-PCI slot.
+	 */
+	if (slot == 7)
+		return gpio_to_irq(4);
+
+	return -1;
+}
+
+static struct hw_pci wnr854t_pci __initdata = {
+	.nr_controllers	= 2,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= wnr854t_pci_map_irq,
+};
+
+static int __init wnr854t_pci_init(void)
+{
+	if (machine_is_wnr854t())
+		pci_common_init(&wnr854t_pci);
+
+	return 0;
+}
+subsys_initcall(wnr854t_pci_init);
+
+MACHINE_START(WNR854T, "Netgear WNR854T")
+	/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= wnr854t_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
new file mode 100644
index 000000000..e6a2da666
--- /dev/null
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -0,0 +1,263 @@
+// SPDX-License-Identifier: GPL-2.0-only
+// arch/arm/mach-orion5x/wrt350n-v2-setup.c
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ethtool.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/platform_data/dsa.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/pci.h>
+#include "orion5x.h"
+#include "common.h"
+#include "mpp.h"
+
+/*
+ * LEDs attached to GPIO
+ */
+static struct gpio_led wrt350n_v2_led_pins[] = {
+	{
+		.name		= "wrt350nv2:green:power",
+		.gpio		= 0,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:security",
+		.gpio		= 1,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:orange:power",
+		.gpio		= 5,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:usb",
+		.gpio		= 6,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:wireless",
+		.gpio		= 7,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led_platform_data wrt350n_v2_led_data = {
+	.leds		= wrt350n_v2_led_pins,
+	.num_leds	= ARRAY_SIZE(wrt350n_v2_led_pins),
+};
+
+static struct platform_device wrt350n_v2_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &wrt350n_v2_led_data,
+	},
+};
+
+/*
+ * Buttons attached to GPIO
+ */
+static struct gpio_keys_button wrt350n_v2_buttons[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 3,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_WPS_BUTTON,
+		.gpio		= 2,
+		.desc		= "WPS Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
+	.buttons	= wrt350n_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(wrt350n_v2_buttons),
+};
+
+static struct platform_device wrt350n_v2_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &wrt350n_v2_button_data,
+	},
+};
+
+/*
+ * General setup
+ */
+static unsigned int wrt350n_v2_mpp_modes[] __initdata = {
+	MPP0_GPIO,		/* Power LED green (0=on) */
+	MPP1_GPIO,		/* Security LED (0=on) */
+	MPP2_GPIO,		/* Internal Button (0=on) */
+	MPP3_GPIO,		/* Reset Button (0=on) */
+	MPP4_GPIO,		/* PCI int */
+	MPP5_GPIO,		/* Power LED orange (0=on) */
+	MPP6_GPIO,		/* USB LED (0=on) */
+	MPP7_GPIO,		/* Wireless LED (0=on) */
+	MPP8_UNUSED,		/* ??? */
+	MPP9_GIGE,		/* GE_RXERR */
+	MPP10_UNUSED,		/* ??? */
+	MPP11_UNUSED,		/* ??? */
+	MPP12_GIGE,		/* GE_TXD[4] */
+	MPP13_GIGE,		/* GE_TXD[5] */
+	MPP14_GIGE,		/* GE_TXD[6] */
+	MPP15_GIGE,		/* GE_TXD[7] */
+	MPP16_GIGE,		/* GE_RXD[4] */
+	MPP17_GIGE,		/* GE_RXD[5] */
+	MPP18_GIGE,		/* GE_RXD[6] */
+	MPP19_GIGE,		/* GE_RXD[7] */
+	0,
+};
+
+/*
+ * 8M NOR flash Device bus boot chip select
+ */
+#define WRT350N_V2_NOR_BOOT_BASE	0xf4000000
+#define WRT350N_V2_NOR_BOOT_SIZE	SZ_8M
+
+static struct mtd_partition wrt350n_v2_nor_flash_partitions[] = {
+	{
+		.name		= "kernel",
+		.offset		= 0x00000000,
+		.size		= 0x00760000,
+	}, {
+		.name		= "rootfs",
+		.offset		= 0x001a0000,
+		.size		= 0x005c0000,
+	}, {
+		.name		= "lang",
+		.offset		= 0x00760000,
+		.size		= 0x00040000,
+	}, {
+		.name		= "nvram",
+		.offset		= 0x007a0000,
+		.size		= 0x00020000,
+	}, {
+		.name		= "u-boot",
+		.offset		= 0x007c0000,
+		.size		= 0x00040000,
+	},
+};
+
+static struct physmap_flash_data wrt350n_v2_nor_flash_data = {
+	.width		= 1,
+	.parts		= wrt350n_v2_nor_flash_partitions,
+	.nr_parts	= ARRAY_SIZE(wrt350n_v2_nor_flash_partitions),
+};
+
+static struct resource wrt350n_v2_nor_flash_resource = {
+	.flags		= IORESOURCE_MEM,
+	.start		= WRT350N_V2_NOR_BOOT_BASE,
+	.end		= WRT350N_V2_NOR_BOOT_BASE + WRT350N_V2_NOR_BOOT_SIZE - 1,
+};
+
+static struct platform_device wrt350n_v2_nor_flash = {
+	.name			= "physmap-flash",
+	.id			= 0,
+	.dev		= {
+		.platform_data	= &wrt350n_v2_nor_flash_data,
+	},
+	.num_resources		= 1,
+	.resource		= &wrt350n_v2_nor_flash_resource,
+};
+
+static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = {
+	.phy_addr	= MV643XX_ETH_PHY_NONE,
+	.speed		= SPEED_1000,
+	.duplex		= DUPLEX_FULL,
+};
+
+static struct dsa_chip_data wrt350n_v2_switch_chip_data = {
+	.port_names[0]	= "lan2",
+	.port_names[1]	= "lan1",
+	.port_names[2]	= "wan",
+	.port_names[3]	= "cpu",
+	.port_names[5]	= "lan3",
+	.port_names[7]	= "lan4",
+};
+
+static void __init wrt350n_v2_init(void)
+{
+	/*
+	 * Setup basic Orion functions. Need to be called early.
+	 */
+	orion5x_init();
+
+	orion5x_mpp_conf(wrt350n_v2_mpp_modes);
+
+	/*
+	 * Configure peripherals.
+	 */
+	orion5x_ehci0_init();
+	orion5x_eth_init(&wrt350n_v2_eth_data);
+	orion5x_eth_switch_init(&wrt350n_v2_switch_chip_data);
+	orion5x_uart0_init();
+
+	mvebu_mbus_add_window_by_id(ORION_MBUS_DEVBUS_BOOT_TARGET,
+				    ORION_MBUS_DEVBUS_BOOT_ATTR,
+				    WRT350N_V2_NOR_BOOT_BASE,
+				    WRT350N_V2_NOR_BOOT_SIZE);
+	platform_device_register(&wrt350n_v2_nor_flash);
+	platform_device_register(&wrt350n_v2_leds);
+	platform_device_register(&wrt350n_v2_button_device);
+}
+
+static int __init wrt350n_v2_pci_map_irq(const struct pci_dev *dev, u8 slot,
+	u8 pin)
+{
+	int irq;
+
+	/*
+	 * Check for devices with hard-wired IRQs.
+	 */
+	irq = orion5x_pci_map_irq(dev, slot, pin);
+	if (irq != -1)
+		return irq;
+
+	/*
+	 * Mini-PCI slot.
+	 */
+	if (slot == 7)
+		return gpio_to_irq(4);
+
+	return -1;
+}
+
+static struct hw_pci wrt350n_v2_pci __initdata = {
+	.nr_controllers	= 2,
+	.setup		= orion5x_pci_sys_setup,
+	.scan		= orion5x_pci_sys_scan_bus,
+	.map_irq	= wrt350n_v2_pci_map_irq,
+};
+
+static int __init wrt350n_v2_pci_init(void)
+{
+	if (machine_is_wrt350n_v2())
+		pci_common_init(&wrt350n_v2_pci);
+
+	return 0;
+}
+subsys_initcall(wrt350n_v2_pci_init);
+
+MACHINE_START(WRT350N_V2, "Linksys WRT350N v2")
+	/* Maintainer: Lennert Buytenhek <buytenh@marvell.com> */
+	.atag_offset	= 0x100,
+	.nr_irqs	= ORION5X_NR_IRQS,
+	.init_machine	= wrt350n_v2_init,
+	.map_io		= orion5x_map_io,
+	.init_early	= orion5x_init_early,
+	.init_irq	= orion5x_init_irq,
+	.init_time	= orion5x_timer_init,
+	.fixup		= tag_fixup_mem32,
+	.restart	= orion5x_restart,
+MACHINE_END