Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 145 insertions, 0 deletions

diff --git a/arch/arm/mach-versatile/integrator_cp.c b/arch/arm/mach-versatile/integrator_cp.c
new file mode 100644
index 000000000..2ed4ded56
--- /dev/null
+++ b/arch/arm/mach-versatile/integrator_cp.c
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *  Copyright (C) 2003 Deep Blue Solutions Ltd
+ */
+#include <linux/kernel.h>
+#include <linux/amba/mmci.h>
+#include <linux/io.h>
+#include <linux/irqchip.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/sched_clock.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include "integrator-hardware.h"
+#include "integrator-cm.h"
+#include "integrator.h"
+
+/* Base address to the core module header */
+static struct regmap *cm_map;
+/* Base address to the CP controller */
+static void __iomem *intcp_con_base;
+
+#define CM_COUNTER_OFFSET 0x28
+
+/*
+ * Logical      Physical
+ * f1400000	14000000	Interrupt controller
+ * f1600000	16000000	UART 0
+ * fca00000	ca000000	SIC
+ */
+
+static struct map_desc intcp_io_desc[] __initdata __maybe_unused = {
+	{
+		.virtual	= IO_ADDRESS(INTEGRATOR_IC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_IC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_UART0_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_UART0_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}, {
+		.virtual	= IO_ADDRESS(INTEGRATOR_CP_SIC_BASE),
+		.pfn		= __phys_to_pfn(INTEGRATOR_CP_SIC_BASE),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE
+	}
+};
+
+static void __init intcp_map_io(void)
+{
+	iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc));
+}
+
+/*
+ * It seems that the card insertion interrupt remains active after
+ * we've acknowledged it.  We therefore ignore the interrupt, and
+ * rely on reading it from the SIC.  This also means that we must
+ * clear the latched interrupt.
+ */
+static unsigned int mmc_status(struct device *dev)
+{
+	unsigned int status = readl(__io_address(0xca000000 + 4));
+	writel(8, intcp_con_base + 8);
+
+	return status & 8;
+}
+
+static struct mmci_platform_data mmc_data = {
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.status		= mmc_status,
+};
+
+static u64 notrace intcp_read_sched_clock(void)
+{
+	unsigned int val;
+
+	/* MMIO so discard return code */
+	regmap_read(cm_map, CM_COUNTER_OFFSET, &val);
+	return val;
+}
+
+static void __init intcp_init_early(void)
+{
+	cm_map = syscon_regmap_lookup_by_compatible("arm,core-module-integrator");
+	if (IS_ERR(cm_map))
+		return;
+	sched_clock_register(intcp_read_sched_clock, 32, 24000000);
+}
+
+static void __init intcp_init_irq_of(void)
+{
+	cm_init();
+	irqchip_init();
+}
+
+/*
+ * For the Device Tree, add in the UART, MMC and CLCD specifics as AUXDATA
+ * and enforce the bus names since these are used for clock lookups.
+ */
+static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = {
+	OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE,
+		"mmci", &mmc_data),
+	{ /* sentinel */ },
+};
+
+static const struct of_device_id intcp_syscon_match[] = {
+	{ .compatible = "arm,integrator-cp-syscon"},
+	{ },
+};
+
+static void __init intcp_init_of(void)
+{
+	struct device_node *cpcon;
+
+	cpcon = of_find_matching_node(NULL, intcp_syscon_match);
+	if (!cpcon)
+		return;
+
+	intcp_con_base = of_iomap(cpcon, 0);
+	if (!intcp_con_base)
+		return;
+
+	of_platform_default_populate(NULL, intcp_auxdata_lookup, NULL);
+}
+
+static const char * intcp_dt_board_compat[] = {
+	"arm,integrator-cp",
+	NULL,
+};
+
+DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)")
+	.reserve	= integrator_reserve,
+	.map_io		= intcp_map_io,
+	.init_early	= intcp_init_early,
+	.init_irq	= intcp_init_irq_of,
+	.init_machine	= intcp_init_of,
+	.dt_compat      = intcp_dt_board_compat,
+MACHINE_END