Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 358 insertions, 0 deletions

diff --git a/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
new file mode 100644
index 000000000..fee53c25f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzg2l-smarc-som.dtsi
@@ -0,0 +1,358 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
+#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
+
+/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */
+#define EMMC	1
+
+/*
+ * To enable uSD card on CN3,
+ * SW1[2] should be at position 3/ON.
+ * Disable eMMC by setting "#define EMMC	0" above.
+ */
+#define SDHI	(!EMMC)
+
+/ {
+	aliases {
+		ethernet0 = &eth0;
+		ethernet1 = &eth1;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_1p1v: regulator-vdd-core {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.1V";
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <3300000 1>, <1800000 0>;
+		regulator-boot-on;
+		gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+};
+
+&adc {
+	pinctrl-0 = <&adc_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/delete-node/ channel@6;
+	/delete-node/ channel@7;
+};
+
+&eth0 {
+	pinctrl-0 = <&eth0_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy0: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&irqc>;
+		interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&eth1 {
+	pinctrl-0 = <&eth1_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	phy1: ethernet-phy@7 {
+		compatible = "ethernet-phy-id0022.1640",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <7>;
+		interrupt-parent = <&irqc>;
+		interrupts = <RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>;
+		rxc-skew-psec = <2400>;
+		txc-skew-psec = <2400>;
+		rxdv-skew-psec = <0>;
+		txen-skew-psec = <0>;
+		rxd0-skew-psec = <0>;
+		rxd1-skew-psec = <0>;
+		rxd2-skew-psec = <0>;
+		rxd3-skew-psec = <0>;
+		txd0-skew-psec = <0>;
+		txd1-skew-psec = <0>;
+		txd2-skew-psec = <0>;
+		txd3-skew-psec = <0>;
+	};
+};
+
+&extal_clk {
+	clock-frequency = <24000000>;
+};
+
+&gpu {
+	mali-supply = <&reg_1p1v>;
+};
+
+&ostm1 {
+	status = "okay";
+};
+
+&ostm2 {
+	status = "okay";
+};
+
+&pinctrl {
+	adc_pins: adc {
+		pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */
+	};
+
+	eth0_pins: eth0 {
+		pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
+			 <RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
+			 <RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
+			 <RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
+			 <RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
+			 <RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
+			 <RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
+			 <RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
+			 <RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
+			 <RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
+			 <RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
+			 <RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
+			 <RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
+			 <RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
+			 <RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
+			 <RZG2L_PORT_PINMUX(1, 0, 1)>;  /* IRQ2 */
+	};
+
+	eth1_pins: eth1 {
+		pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */
+			 <RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */
+			 <RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */
+			 <RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */
+			 <RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */
+			 <RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */
+			 <RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */
+			 <RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */
+			 <RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */
+			 <RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */
+			 <RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */
+			 <RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */
+			 <RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */
+			 <RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */
+			 <RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */
+			 <RZG2L_PORT_PINMUX(1, 1, 1)>;  /* IRQ3 */
+	};
+
+	gpio-sd0-pwr-en-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(4, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "gpio_sd0_pwr_en";
+	};
+
+	qspi0_pins: qspi0 {
+		qspi0-data {
+			pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
+			power-source = <1800>;
+		};
+
+		qspi0-ctrl {
+			pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#";
+			power-source = <1800>;
+		};
+	};
+
+	/*
+	 * SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
+	 * The below switch logic can be used to select the device between
+	 * eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT.
+	 * SW1[2] should be at position 2/OFF to enable 64 GB eMMC
+	 * SW1[2] should be at position 3/ON to enable uSD card CN3
+	 */
+	sd0-dev-sel-hog {
+		gpio-hog;
+		gpios = <RZG2L_GPIO(41, 1) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "sd0_dev_sel";
+	};
+
+	sdhi0_emmc_pins: sd0emmc {
+		sd0_emmc_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
+			       "SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_emmc_rst {
+			pins = "SD0_RST#";
+			power-source = <1800>;
+		};
+	};
+
+	sdhi0_pins: sd0 {
+		sd0_data {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <3300>;
+		};
+
+		sd0_ctrl {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <3300>;
+		};
+
+		sd0_mux {
+			pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */
+		};
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		sd0_data_uhs {
+			pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
+			power-source = <1800>;
+		};
+
+		sd0_ctrl_uhs {
+			pins = "SD0_CLK", "SD0_CMD";
+			power-source = <1800>;
+		};
+
+		sd0_mux_uhs {
+			pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */
+		};
+	};
+};
+
+&sbc {
+	pinctrl-0 = <&qspi0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	flash@0 {
+		compatible = "micron,mt25qu512a", "jedec,spi-nor";
+		reg = <0>;
+		m25p,fast-read;
+		spi-max-frequency = <50000000>;
+		spi-rx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			boot@0 {
+				reg = <0x00000000 0x2000000>;
+				read-only;
+			};
+			user@2000000 {
+				reg = <0x2000000 0x2000000>;
+			};
+		};
+	};
+};
+
+#if SDHI
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+#if EMMC
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+#endif
+
+&wdt0 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&wdt1 {
+	status = "okay";
+	timeout-sec = <60>;
+};
+
+&wdt2 {
+	status = "okay";
+	timeout-sec = <60>;
+};