Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 97 insertions, 0 deletions

diff --git a/arch/m68k/coldfire/m523x.c b/arch/m68k/coldfire/m523x.c
new file mode 100644
index 000000000..83a997313
--- /dev/null
+++ b/arch/m68k/coldfire/m523x.c
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: GPL-2.0
+/***************************************************************************/
+
+/*
+ *	m523x.c  -- platform support for ColdFire 523x based boards
+ *
+ *	Sub-architcture dependent initialization code for the Freescale
+ *	523x CPUs.
+ *
+ *	Copyright (C) 1999-2005, Greg Ungerer (gerg@snapgear.com)
+ *	Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/clkdev.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfclk.h>
+
+/***************************************************************************/
+
+DEFINE_CLK(pll, "pll.0", MCF_CLK);
+DEFINE_CLK(sys, "sys.0", MCF_BUSCLK);
+
+static struct clk_lookup m523x_clk_lookup[] = {
+	CLKDEV_INIT(NULL, "pll.0", &clk_pll),
+	CLKDEV_INIT(NULL, "sys.0", &clk_sys),
+	CLKDEV_INIT("mcfpit.0", NULL, &clk_pll),
+	CLKDEV_INIT("mcfpit.1", NULL, &clk_pll),
+	CLKDEV_INIT("mcfpit.2", NULL, &clk_pll),
+	CLKDEV_INIT("mcfpit.3", NULL, &clk_pll),
+	CLKDEV_INIT("mcfuart.0", NULL, &clk_sys),
+	CLKDEV_INIT("mcfuart.1", NULL, &clk_sys),
+	CLKDEV_INIT("mcfuart.2", NULL, &clk_sys),
+	CLKDEV_INIT("mcfqspi.0", NULL, &clk_sys),
+	CLKDEV_INIT("fec.0", NULL, &clk_sys),
+	CLKDEV_INIT("imx1-i2c.0", NULL, &clk_sys),
+};
+
+/***************************************************************************/
+
+static void __init m523x_qspi_init(void)
+{
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+	u16 par;
+
+	/* setup QSPS pins for QSPI with gpio CS control */
+	writeb(0x1f, MCFGPIO_PAR_QSPI);
+	/* and CS2 & CS3 as gpio */
+	par = readw(MCFGPIO_PAR_TIMER);
+	par &= 0x3f3f;
+	writew(par, MCFGPIO_PAR_TIMER);
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+}
+
+/***************************************************************************/
+
+static void __init m523x_i2c_init(void)
+{
+#if IS_ENABLED(CONFIG_I2C_IMX)
+	u8 par;
+
+	/* setup Port AS Pin Assignment Register for I2C */
+	/*  set PASPA0 to SCL and PASPA1 to SDA */
+	par = readb(MCFGPIO_PAR_FECI2C);
+	par |= 0x0f;
+	writeb(par, MCFGPIO_PAR_FECI2C);
+#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
+}
+
+/***************************************************************************/
+
+static void __init m523x_fec_init(void)
+{
+	/* Set multi-function pins to ethernet use */
+	writeb(readb(MCFGPIO_PAR_FECI2C) | 0xf0, MCFGPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+	mach_sched_init = hw_timer_init;
+	m523x_fec_init();
+	m523x_qspi_init();
+	m523x_i2c_init();
+
+	clkdev_add_table(m523x_clk_lookup, ARRAY_SIZE(m523x_clk_lookup));
+}
+
+/***************************************************************************/