summaryrefslogtreecommitdiffstats
path: root/arch/mips/boot/dts/ingenic/ci20.dts
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /arch/mips/boot/dts/ingenic/ci20.dts
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'arch/mips/boot/dts/ingenic/ci20.dts')
-rw-r--r--arch/mips/boot/dts/ingenic/ci20.dts598
1 files changed, 598 insertions, 0 deletions
diff --git a/arch/mips/boot/dts/ingenic/ci20.dts b/arch/mips/boot/dts/ingenic/ci20.dts
new file mode 100644
index 000000000..8f21d2304
--- /dev/null
+++ b/arch/mips/boot/dts/ingenic/ci20.dts
@@ -0,0 +1,598 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "jz4780.dtsi"
+#include <dt-bindings/clock/ingenic,tcu.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/regulator/active-semi,8865-regulator.h>
+
+/ {
+ compatible = "img,ci20", "ingenic,jz4780";
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x10000000
+ 0x30000000 0x30000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ switch {
+ label = "ci20:sw1";
+ linux,code = <KEY_F13>;
+ gpios = <&gpd 17 GPIO_ACTIVE_HIGH>;
+ wakeup-source;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led0 {
+ label = "ci20:red:led0";
+ gpios = <&gpc 3 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "none";
+ };
+
+ led1 {
+ label = "ci20:red:led1";
+ gpios = <&gpc 2 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "nand-disk";
+ };
+
+ led2 {
+ label = "ci20:red:led2";
+ gpios = <&gpc 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu1";
+ };
+
+ led3 {
+ label = "ci20:red:led3";
+ gpios = <&gpc 0 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ };
+ };
+
+ eth0_power: fixedregulator@0 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "eth0_power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpb 25 GPIO_ACTIVE_LOW>;
+ enable-active-high;
+ };
+
+ hdmi_out: connector {
+ compatible = "hdmi-connector";
+ label = "HDMI OUT";
+ type = "a";
+
+ ddc-en-gpios = <&gpa 25 GPIO_ACTIVE_HIGH>;
+
+ port {
+ hdmi_con: endpoint {
+ remote-endpoint = <&dw_hdmi_out>;
+ };
+ };
+ };
+
+ ir: ir {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpe 3 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan0_power: fixedregulator@1 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "wlan0_power";
+
+ gpio = <&gpb 19 GPIO_ACTIVE_LOW>;
+ enable-active-high;
+ };
+
+ otg_power: fixedregulator@2 {
+ compatible = "regulator-fixed";
+
+ regulator-name = "otg_power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+
+ gpio = <&gpf 15 GPIO_ACTIVE_LOW>;
+ enable-active-high;
+ };
+};
+
+&ext {
+ clock-frequency = <48000000>;
+};
+
+&cgu {
+ /*
+ * Use the 32.768 kHz oscillator as the parent of the RTC for a higher
+ * precision.
+ */
+ assigned-clocks = <&cgu JZ4780_CLK_OTGPHY>, <&cgu JZ4780_CLK_RTC>,
+ <&cgu JZ4780_CLK_SSIPLL>, <&cgu JZ4780_CLK_SSI>,
+ <&cgu JZ4780_CLK_HDMI>;
+ assigned-clock-parents = <0>, <&cgu JZ4780_CLK_RTCLK>,
+ <&cgu JZ4780_CLK_MPLL>,
+ <&cgu JZ4780_CLK_SSIPLL>;
+ assigned-clock-rates = <48000000>, <0>, <54000000>, <0>, <27000000>;
+};
+
+&tcu {
+ /*
+ * 750 kHz for the system timers and clocksource,
+ * use channel #0 and #1 for the per cpu system timers,
+ * and use channel #2 for the clocksource.
+ *
+ * 3000 kHz for the OST timer to provide a higher
+ * precision clocksource.
+ */
+ assigned-clocks = <&tcu TCU_CLK_TIMER0>, <&tcu TCU_CLK_TIMER1>,
+ <&tcu TCU_CLK_TIMER2>, <&tcu TCU_CLK_OST>;
+ assigned-clock-rates = <750000>, <750000>, <750000>, <3000000>;
+};
+
+&mmc0 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <50000000>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc0>;
+
+ cd-gpios = <&gpf 20 GPIO_ACTIVE_LOW>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ bus-width = <4>;
+ max-frequency = <50000000>;
+ non-removable;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_mmc1>;
+
+ brcmf: wifi@1 {
+/* reg = <4>;*/
+ compatible = "brcm,bcm4330-fmac";
+ vcc-supply = <&wlan0_power>;
+ device-wakeup-gpios = <&gpd 9 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpf 7 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart0>;
+};
+
+&uart1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart1>;
+};
+
+&uart2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart2>;
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm4330-bt";
+ reset-gpios = <&gpf 8 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <&wlan0_power>;
+ device-wakeup-gpios = <&gpf 5 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpf 6 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpf 4 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&uart3 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart3>;
+};
+
+&uart4 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_uart4>;
+};
+
+&i2c0 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c0>;
+
+ clock-frequency = <400000>;
+
+ act8600: act8600@5a {
+ compatible = "active-semi,act8600";
+ reg = <0x5a>;
+ status = "okay";
+
+ regulators {
+ vddcore: SUDCDC1 {
+ regulator-name = "DCDC_REG1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
+ vddmem: SUDCDC2 {
+ regulator-name = "DCDC_REG2";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+ vcc_33: SUDCDC3 {
+ regulator-name = "DCDC_REG3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ vcc_50: SUDCDC4 {
+ regulator-name = "SUDCDC_REG4";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+ vcc_25: LDO_REG5 {
+ regulator-name = "LDO_REG5";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+ wifi_io: LDO_REG6 {
+ regulator-name = "LDO_REG6";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+ vcc_28: LDO_REG7 {
+ regulator-name = "LDO_REG7";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ };
+ vcc_15: LDO_REG8 {
+ regulator-name = "LDO_REG8";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-always-on;
+ };
+ vrtc_18: LDO_REG9 {
+ regulator-name = "LDO_REG9";
+ /* Despite the datasheet stating 3.3V
+ * for REG9 and the driver expecting that,
+ * REG9 outputs 1.8V.
+ * Likely the CI20 uses a proprietary
+ * factory programmed chip variant.
+ * Since this is a simple on/off LDO the
+ * exact values do not matter.
+ */
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ vcc_11: LDO_REG10 {
+ regulator-name = "LDO_REG10";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c1>;
+
+};
+
+&i2c2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c2>;
+
+};
+
+&i2c3 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c3>;
+
+};
+
+&i2c4 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_i2c4>;
+
+ clock-frequency = <400000>;
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+
+ interrupt-parent = <&gpf>;
+ interrupts = <30 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&nemc {
+ status = "okay";
+
+ nandc: nand-controller@1 {
+ compatible = "ingenic,jz4780-nand";
+ reg = <1 0 0x1000000>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ingenic,bch-controller = <&bch>;
+
+ ingenic,nemc-tAS = <10>;
+ ingenic,nemc-tAH = <5>;
+ ingenic,nemc-tBP = <10>;
+ ingenic,nemc-tAW = <15>;
+ ingenic,nemc-tSTRV = <100>;
+
+ /*
+ * Only CLE/ALE are needed for the devices that are connected, rather
+ * than the full address line set.
+ */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc>;
+
+ nand@1 {
+ reg = <1>;
+
+ nand-ecc-step-size = <1024>;
+ nand-ecc-strength = <24>;
+ nand-ecc-mode = "hw";
+ nand-on-flash-bbt;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc_cs1>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x0 0x0 0x800000>;
+ };
+
+ partition@800000 {
+ label = "u-boot";
+ reg = <0x0 0x800000 0x0 0x200000>;
+ };
+
+ partition@a00000 {
+ label = "u-boot-env";
+ reg = <0x0 0xa00000 0x0 0x200000>;
+ };
+
+ partition@c00000 {
+ label = "boot";
+ reg = <0x0 0xc00000 0x0 0x4000000>;
+ };
+
+ partition@4c00000 {
+ label = "system";
+ reg = <0x0 0x4c00000 0x1 0xfb400000>;
+ };
+ };
+ };
+ };
+
+ dm9000@6 {
+ compatible = "davicom,dm9000";
+ davicom,no-eeprom;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_nemc_cs6>;
+
+ reg = <6 0 1 /* addr */
+ 6 2 1>; /* data */
+
+ ingenic,nemc-tAS = <15>;
+ ingenic,nemc-tAH = <10>;
+ ingenic,nemc-tBP = <20>;
+ ingenic,nemc-tAW = <50>;
+ ingenic,nemc-tSTRV = <100>;
+
+ reset-gpios = <&gpf 12 GPIO_ACTIVE_LOW>;
+ vcc-supply = <&eth0_power>;
+
+ interrupt-parent = <&gpe>;
+ interrupts = <19 4>;
+
+ nvmem-cells = <&eth0_addr>;
+ nvmem-cell-names = "mac-address";
+ };
+};
+
+&bch {
+ status = "okay";
+};
+
+&otg_phy {
+ status = "okay";
+
+ vcc-supply = <&otg_power>;
+};
+
+&otg {
+ status = "okay";
+};
+
+&pinctrl {
+ pins_uart0: uart0 {
+ function = "uart0";
+ groups = "uart0-data";
+ bias-disable;
+ };
+
+ pins_uart1: uart1 {
+ function = "uart1";
+ groups = "uart1-data";
+ bias-disable;
+ };
+
+ pins_uart2: uart2 {
+ function = "uart2";
+ groups = "uart2-data", "uart2-hwflow";
+ bias-disable;
+ };
+
+ pins_uart3: uart3 {
+ function = "uart3";
+ groups = "uart3-data", "uart3-hwflow";
+ bias-disable;
+ };
+
+ pins_uart4: uart4 {
+ function = "uart4";
+ groups = "uart4-data";
+ bias-disable;
+ };
+
+ pins_i2c0: i2c0 {
+ function = "i2c0";
+ groups = "i2c0-data";
+ bias-disable;
+ };
+
+ pins_i2c1: i2c1 {
+ function = "i2c1";
+ groups = "i2c1-data";
+ bias-disable;
+ };
+
+ pins_i2c2: i2c2 {
+ function = "i2c2";
+ groups = "i2c2-data";
+ bias-disable;
+ };
+
+ pins_i2c3: i2c3 {
+ function = "i2c3";
+ groups = "i2c3-data";
+ bias-disable;
+ };
+
+ pins_i2c4: i2c4 {
+ function = "i2c4";
+ groups = "i2c4-data-e";
+ bias-disable;
+ };
+
+ pins_hdmi_ddc: hdmi_ddc {
+ function = "hdmi-ddc";
+ groups = "hdmi-ddc";
+ bias-disable;
+ };
+
+ pins_nemc: nemc {
+ function = "nemc";
+ groups = "nemc-data", "nemc-cle-ale", "nemc-rd-we", "nemc-frd-fwe";
+ bias-disable;
+ };
+
+ pins_nemc_cs1: nemc-cs1 {
+ function = "nemc-cs1";
+ groups = "nemc-cs1";
+ bias-disable;
+ };
+
+ pins_nemc_cs6: nemc-cs6 {
+ function = "nemc-cs6";
+ groups = "nemc-cs6";
+ bias-disable;
+ };
+
+ pins_mmc0: mmc0 {
+ function = "mmc0";
+ groups = "mmc0-1bit-e", "mmc0-4bit-e";
+ bias-disable;
+ };
+
+ pins_mmc1: mmc1 {
+ function = "mmc1";
+ groups = "mmc1-1bit-d", "mmc1-4bit-d";
+ bias-disable;
+ };
+};
+
+&hdmi {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&pins_hdmi_ddc>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dw_hdmi_in: endpoint {
+ remote-endpoint = <&lcd_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dw_hdmi_out: endpoint {
+ remote-endpoint = <&hdmi_con>;
+ };
+ };
+ };
+};
+
+&lcdc0 {
+ status = "okay";
+
+ port {
+ lcd_out: endpoint {
+ remote-endpoint = <&dw_hdmi_in>;
+ };
+ };
+};