Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 167 insertions, 0 deletions

diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
new file mode 100644
index 000000000..ee1488d38
--- /dev/null
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -0,0 +1,167 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * lppaca.h
+ * Copyright (C) 2001  Mike Corrigan IBM Corporation
+ */
+#ifndef _ASM_POWERPC_LPPACA_H
+#define _ASM_POWERPC_LPPACA_H
+
+/*
+ * The below VPHN macros are outside the __KERNEL__ check since these are
+ * used for compiling the vphn selftest in userspace
+ */
+
+/* The H_HOME_NODE_ASSOCIATIVITY h_call returns 6 64-bit registers. */
+#define VPHN_REGISTER_COUNT 6
+
+/*
+ * 6 64-bit registers unpacked into up to 24 be32 associativity values. To
+ * form the complete property we have to add the length in the first cell.
+ */
+#define VPHN_ASSOC_BUFSIZE (VPHN_REGISTER_COUNT*sizeof(u64)/sizeof(u16) + 1)
+
+/*
+ * The H_HOME_NODE_ASSOCIATIVITY hcall takes two values for flags:
+ * 1 for retrieving associativity information for a guest cpu
+ * 2 for retrieving associativity information for a host/hypervisor cpu
+ */
+#define VPHN_FLAG_VCPU	1
+#define VPHN_FLAG_PCPU	2
+
+#ifdef __KERNEL__
+
+/*
+ * These definitions relate to hypervisors that only exist when using
+ * a server type processor
+ */
+#ifdef CONFIG_PPC_BOOK3S
+
+/*
+ * This control block contains the data that is shared between the
+ * hypervisor and the OS.
+ */
+#include <linux/cache.h>
+#include <linux/threads.h>
+#include <asm/types.h>
+#include <asm/mmu.h>
+#include <asm/firmware.h>
+#include <asm/paca.h>
+
+/*
+ * The lppaca is the "virtual processor area" registered with the hypervisor,
+ * H_REGISTER_VPA etc.
+ *
+ * According to PAPR, the structure is 640 bytes long, must be L1 cache line
+ * aligned, and must not cross a 4kB boundary. Its size field must be at
+ * least 640 bytes (but may be more).
+ *
+ * Pre-v4.14 KVM hypervisors reject the VPA if its size field is smaller than
+ * 1kB, so we dynamically allocate 1kB and advertise size as 1kB, but keep
+ * this structure as the canonical 640 byte size.
+ */
+struct lppaca {
+	/* cacheline 1 contains read-only data */
+
+	__be32	desc;			/* Eye catcher 0xD397D781 */
+	__be16	size;			/* Size of this struct */
+	u8	reserved1[3];
+	u8	__old_status;		/* Old status, including shared proc */
+	u8	reserved3[14];
+	volatile __be32 dyn_hw_node_id;	/* Dynamic hardware node id */
+	volatile __be32 dyn_hw_proc_id;	/* Dynamic hardware proc id */
+	u8	reserved4[56];
+	volatile u8 vphn_assoc_counts[8]; /* Virtual processor home node */
+					  /* associativity change counters */
+	u8	reserved5[32];
+
+	/* cacheline 2 contains local read-write data */
+
+	u8	reserved6[48];
+	u8	cede_latency_hint;
+	u8	ebb_regs_in_use;
+	u8	reserved7[6];
+	u8	dtl_enable_mask;	/* Dispatch Trace Log mask */
+	u8	donate_dedicated_cpu;	/* Donate dedicated CPU cycles */
+	u8	fpregs_in_use;
+	u8	pmcregs_in_use;
+	u8	reserved8[28];
+	__be64	wait_state_cycles;	/* Wait cycles for this proc */
+	u8	reserved9[28];
+	__be16	slb_count;		/* # of SLBs to maintain */
+	u8	idle;			/* Indicate OS is idle */
+	u8	vmxregs_in_use;
+
+	/* cacheline 3 is shared with other processors */
+
+	/*
+	 * This is the yield_count.  An "odd" value (low bit on) means that
+	 * the processor is yielded (either because of an OS yield or a
+	 * hypervisor preempt).  An even value implies that the processor is
+	 * currently executing.
+	 * NOTE: Even dedicated processor partitions can yield so this
+	 * field cannot be used to determine if we are shared or dedicated.
+	 */
+	volatile __be32 yield_count;
+	volatile __be32 dispersion_count; /* dispatch changed physical cpu */
+	volatile __be64 cmo_faults;	/* CMO page fault count */
+	volatile __be64 cmo_fault_time;	/* CMO page fault time */
+	u8	reserved10[64];		/* [S]PURR expropriated/donated */
+	volatile __be64 enqueue_dispatch_tb; /* Total TB enqueue->dispatch */
+	volatile __be64 ready_enqueue_tb; /* Total TB ready->enqueue */
+	volatile __be64 wait_ready_tb;	/* Total TB wait->ready */
+	u8	reserved11[16];
+
+	/* cacheline 4-5 */
+
+	__be32	page_ins;		/* CMO Hint - # page ins by OS */
+	u8	reserved12[148];
+	volatile __be64 dtl_idx;	/* Dispatch Trace Log head index */
+	u8	reserved13[96];
+} ____cacheline_aligned;
+
+#define lppaca_of(cpu)	(*paca_ptrs[cpu]->lppaca_ptr)
+
+/*
+ * We are using a non architected field to determine if a partition is
+ * shared or dedicated. This currently works on both KVM and PHYP, but
+ * we will have to transition to something better.
+ */
+#define LPPACA_OLD_SHARED_PROC		2
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * All CPUs should have the same shared proc value, so directly access the PACA
+ * to avoid false positives from DEBUG_PREEMPT.
+ */
+static inline bool lppaca_shared_proc(void)
+{
+	struct lppaca *l = local_paca->lppaca_ptr;
+
+	if (!firmware_has_feature(FW_FEATURE_SPLPAR))
+		return false;
+	return !!(l->__old_status & LPPACA_OLD_SHARED_PROC);
+}
+
+#define get_lppaca()	(get_paca()->lppaca_ptr)
+#endif
+
+/*
+ * SLB shadow buffer structure as defined in the PAPR.  The save_area
+ * contains adjacent ESID and VSID pairs for each shadowed SLB.  The
+ * ESID is stored in the lower 64bits, then the VSID.
+ */
+struct slb_shadow {
+	__be32	persistent;		/* Number of persistent SLBs */
+	__be32	buffer_length;		/* Total shadow buffer length */
+	__be64	reserved;
+	struct	{
+		__be64     esid;
+		__be64	vsid;
+	} save_area[SLB_NUM_BOLTED];
+} ____cacheline_aligned;
+
+extern long hcall_vphn(unsigned long cpu, u64 flags, __be32 *associativity);
+
+#endif /* CONFIG_PPC_BOOK3S */
+#endif /* __KERNEL__ */
+#endif /* _ASM_POWERPC_LPPACA_H */