Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

16 files changed, 2389 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
new file mode 100644
index 000000000..60cc5b537
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -0,0 +1,199 @@
+# SPDX-License-Identifier: GPL-2.0
+config CPM1
+	bool
+	select CPM
+
+choice
+	prompt "8xx Machine Type"
+	depends on PPC_8xx
+	default MPC885ADS
+
+config MPC8XXFADS
+	bool "FADS"
+
+config MPC86XADS
+	bool "MPC86XADS"
+	select CPM1
+	help
+	  MPC86x Application Development System by Freescale Semiconductor.
+	  The MPC86xADS is meant to serve as a platform for s/w and h/w
+	  development around the MPC86X processor families.
+
+config MPC885ADS
+	bool "MPC885ADS"
+	select CPM1
+	select OF_DYNAMIC
+	help
+	  Freescale Semiconductor MPC885 Application Development System (ADS).
+	  Also known as DUET.
+	  The MPC885ADS is meant to serve as a platform for s/w and h/w
+	  development around the MPC885 processor family.
+
+config PPC_EP88XC
+	bool "Embedded Planet EP88xC (a.k.a. CWH-PPC-885XN-VE)"
+	select CPM1
+	help
+	  This enables support for the Embedded Planet EP88xC board.
+
+	  This board is also resold by Freescale as the QUICCStart
+	  MPC885 Evaluation System and/or the CWH-PPC-885XN-VE.
+
+config PPC_ADDER875
+	bool "Analogue & Micro Adder 875"
+	select CPM1
+	help
+	  This enables support for the Analogue & Micro Adder 875
+	  board.
+
+config TQM8XX
+	bool "TQM8XX"
+	select CPM1
+	help
+	  support for the mpc8xx based boards from TQM.
+
+endchoice
+
+menu "Freescale Ethernet driver platform-specific options"
+	depends on (FS_ENET && MPC885ADS)
+
+	config MPC8xx_SECOND_ETH
+	bool "Second Ethernet channel"
+	depends on MPC885ADS
+	default y
+	help
+	  This enables support for second Ethernet on MPC885ADS and MPC86xADS boards.
+	  The latter will use SCC1, for 885ADS you can select it below.
+
+	choice
+		prompt "Second Ethernet channel"
+		depends on MPC8xx_SECOND_ETH
+		default MPC8xx_SECOND_ETH_FEC2
+
+		config MPC8xx_SECOND_ETH_FEC2
+		bool "FEC2"
+		depends on MPC885ADS
+		help
+		  Enable FEC2 to serve as 2-nd Ethernet channel. Note that SMC2
+		  (often 2-nd UART) will not work if this is enabled.
+
+		config MPC8xx_SECOND_ETH_SCC3
+		bool "SCC3"
+		depends on MPC885ADS
+		help
+		  Enable SCC3 to serve as 2-nd Ethernet channel. Note that SMC1
+		  (often 1-nd UART) will not work if this is enabled.
+
+	endchoice
+
+endmenu
+
+#
+# MPC8xx Communication options
+#
+
+menu "MPC8xx CPM Options"
+	depends on PPC_8xx
+
+# This doesn't really belong here, but it is convenient to ask
+# 8xx specific questions.
+comment "Generic MPC8xx Options"
+
+config 8xx_GPIO
+	bool "GPIO API Support"
+	select GPIOLIB
+	help
+	  Saying Y here will cause the ports on an MPC8xx processor to be used
+	  with the GPIO API.  If you say N here, the kernel needs less memory.
+
+	  If in doubt, say Y here.
+
+config 8xx_CPU15
+	bool "CPU15 Silicon Errata"
+	depends on !HUGETLB_PAGE
+	default y
+	help
+	  This enables a workaround for erratum CPU15 on MPC8xx chips.
+	  This bug can cause incorrect code execution under certain
+	  circumstances.  This workaround adds some overhead (a TLB miss
+	  every time execution crosses a page boundary), and you may wish
+	  to disable it if you have worked around the bug in the compiler
+	  (by not placing conditional branches or branches to LR or CTR
+	  in the last word of a page, with a target of the last cache
+	  line in the next page), or if you have used some other
+	  workaround.
+
+	  If in doubt, say Y here.
+
+choice
+	prompt "Microcode patch selection"
+	default NO_UCODE_PATCH
+	help
+	  Help not implemented yet, coming soon.
+
+config NO_UCODE_PATCH
+	bool "None"
+
+config USB_SOF_UCODE_PATCH
+	bool "USB SOF patch"
+	help
+	  Help not implemented yet, coming soon.
+
+config I2C_SPI_UCODE_PATCH
+	bool "I2C/SPI relocation patch"
+	help
+	  Help not implemented yet, coming soon.
+
+config I2C_SPI_SMC1_UCODE_PATCH
+	bool "I2C/SPI/SMC1 relocation patch"
+	help
+	  Help not implemented yet, coming soon.
+
+config SMC_UCODE_PATCH
+	bool "SMC relocation patch"
+	help
+	  This microcode relocates SMC1 and SMC2 parameter RAMs at
+	  offset 0x1ec0 and 0x1fc0 to allow extended parameter RAM
+	  for SCC3 and SCC4.
+
+endchoice
+
+config UCODE_PATCH
+	bool
+	default y
+	depends on !NO_UCODE_PATCH
+
+menu "8xx advanced setup"
+	depends on PPC_8xx
+
+config PIN_TLB
+	bool "Pinned Kernel TLBs"
+	depends on ADVANCED_OPTIONS
+	help
+	  On the 8xx, we have 32 instruction TLBs and 32 data TLBs. In each
+	  table 4 TLBs can be pinned.
+
+	  It reduces the amount of usable TLBs to 28 (ie by 12%). That's the
+	  reason why we make it selectable.
+
+	  This option does nothing, it just activate the selection of what
+	  to pin.
+
+config PIN_TLB_DATA
+	bool "Pinned TLB for DATA"
+	depends on PIN_TLB
+	default y
+	help
+	  This pins the first 32 Mbytes of memory with 8M pages.
+
+config PIN_TLB_IMMR
+	bool "Pinned TLB for IMMR"
+	depends on PIN_TLB
+	default y
+	help
+	  This pins the IMMR area with a 512kbytes page. In case
+	  CONFIG_PIN_TLB_DATA is also selected, it will reduce
+	  CONFIG_PIN_TLB_DATA to 24 Mbytes.
+
+endmenu
+
+endmenu
diff --git a/arch/powerpc/platforms/8xx/Makefile b/arch/powerpc/platforms/8xx/Makefile
new file mode 100644
index 000000000..5a098f7d5
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/Makefile
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for the PowerPC 8xx linux kernel.
+#
+obj-y			+= m8xx_setup.o machine_check.o pic.o
+obj-$(CONFIG_CPM1)		+= cpm1.o cpm1-ic.o
+obj-$(CONFIG_UCODE_PATCH)	+= micropatch.o
+obj-$(CONFIG_MPC885ADS)   += mpc885ads_setup.o
+obj-$(CONFIG_MPC86XADS)   += mpc86xads_setup.o
+obj-$(CONFIG_PPC_EP88XC)  += ep88xc.o
+obj-$(CONFIG_PPC_ADDER875) += adder875.o
+obj-$(CONFIG_TQM8XX)      += tqm8xx_setup.o
diff --git a/arch/powerpc/platforms/8xx/adder875.c b/arch/powerpc/platforms/8xx/adder875.c
new file mode 100644
index 000000000..10e6e4fe7
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/adder875.c
@@ -0,0 +1,112 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Analogue & Micro Adder MPC875 board support
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ *
+ * Copyright (c) 2007 Freescale Semiconductor, Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/fs_enet_pd.h>
+#include <linux/of_platform.h>
+
+#include <asm/time.h>
+#include <asm/machdep.h>
+#include <asm/cpm1.h>
+#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+
+#include "mpc8xx.h"
+#include "pic.h"
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static __initdata struct cpm_pin adder875_pins[] = {
+	/* SMC1 */
+	{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+	/* MII1 */
+	{CPM_PORTA, 0, CPM_PIN_INPUT},
+	{CPM_PORTA, 1, CPM_PIN_INPUT},
+	{CPM_PORTA, 2, CPM_PIN_INPUT},
+	{CPM_PORTA, 3, CPM_PIN_INPUT},
+	{CPM_PORTA, 4, CPM_PIN_OUTPUT},
+	{CPM_PORTA, 10, CPM_PIN_OUTPUT},
+	{CPM_PORTA, 11, CPM_PIN_OUTPUT},
+	{CPM_PORTB, 19, CPM_PIN_INPUT},
+	{CPM_PORTB, 31, CPM_PIN_INPUT},
+	{CPM_PORTC, 12, CPM_PIN_INPUT},
+	{CPM_PORTC, 13, CPM_PIN_INPUT},
+	{CPM_PORTE, 30, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 31, CPM_PIN_OUTPUT},
+
+	/* MII2 */
+	{CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 16, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 21, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 22, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 23, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 24, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 25, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 26, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 27, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 28, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 29, CPM_PIN_OUTPUT},
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(adder875_pins); i++) {
+		const struct cpm_pin *pin = &adder875_pins[i];
+		cpm1_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+
+	/* Set FEC1 and FEC2 to MII mode */
+	clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
+}
+
+static void __init adder875_setup(void)
+{
+	cpm_reset();
+	init_ioports();
+}
+
+static int __init adder875_probe(void)
+{
+	return of_machine_is_compatible("analogue-and-micro,adder875");
+}
+
+static const struct of_device_id of_bus_ids[] __initconst = {
+	{ .compatible = "simple-bus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+	return 0;
+}
+machine_device_initcall(adder875, declare_of_platform_devices);
+
+define_machine(adder875) {
+	.name = "Adder MPC875",
+	.probe = adder875_probe,
+	.setup_arch = adder875_setup,
+	.init_IRQ = mpc8xx_pic_init,
+	.get_irq = mpc8xx_get_irq,
+	.restart = mpc8xx_restart,
+	.calibrate_decr = generic_calibrate_decr,
+	.progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/8xx/cpm1-ic.c b/arch/powerpc/platforms/8xx/cpm1-ic.c
new file mode 100644
index 000000000..a18fc7c99
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/cpm1-ic.c
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Interrupt controller for the
+ * Communication Processor Module.
+ * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
+ */
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/platform_device.h>
+#include <asm/cpm1.h>
+
+struct cpm_pic_data {
+	cpic8xx_t __iomem *reg;
+	struct irq_domain *host;
+};
+
+static void cpm_mask_irq(struct irq_data *d)
+{
+	struct cpm_pic_data *data = irq_data_get_irq_chip_data(d);
+	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
+
+	clrbits32(&data->reg->cpic_cimr, (1 << cpm_vec));
+}
+
+static void cpm_unmask_irq(struct irq_data *d)
+{
+	struct cpm_pic_data *data = irq_data_get_irq_chip_data(d);
+	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
+
+	setbits32(&data->reg->cpic_cimr, (1 << cpm_vec));
+}
+
+static void cpm_end_irq(struct irq_data *d)
+{
+	struct cpm_pic_data *data = irq_data_get_irq_chip_data(d);
+	unsigned int cpm_vec = (unsigned int)irqd_to_hwirq(d);
+
+	out_be32(&data->reg->cpic_cisr, (1 << cpm_vec));
+}
+
+static struct irq_chip cpm_pic = {
+	.name = "CPM PIC",
+	.irq_mask = cpm_mask_irq,
+	.irq_unmask = cpm_unmask_irq,
+	.irq_eoi = cpm_end_irq,
+};
+
+static int cpm_get_irq(struct irq_desc *desc)
+{
+	struct cpm_pic_data *data = irq_desc_get_handler_data(desc);
+	int cpm_vec;
+
+	/*
+	 * Get the vector by setting the ACK bit and then reading
+	 * the register.
+	 */
+	out_be16(&data->reg->cpic_civr, 1);
+	cpm_vec = in_be16(&data->reg->cpic_civr);
+	cpm_vec >>= 11;
+
+	return irq_linear_revmap(data->host, cpm_vec);
+}
+
+static void cpm_cascade(struct irq_desc *desc)
+{
+	generic_handle_irq(cpm_get_irq(desc));
+}
+
+static int cpm_pic_host_map(struct irq_domain *h, unsigned int virq,
+			    irq_hw_number_t hw)
+{
+	irq_set_chip_data(virq, h->host_data);
+	irq_set_status_flags(virq, IRQ_LEVEL);
+	irq_set_chip_and_handler(virq, &cpm_pic, handle_fasteoi_irq);
+	return 0;
+}
+
+static const struct irq_domain_ops cpm_pic_host_ops = {
+	.map = cpm_pic_host_map,
+};
+
+static int cpm_pic_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	int irq;
+	struct cpm_pic_data *data;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->reg = devm_ioremap(dev, res->start, resource_size(res));
+	if (!data->reg)
+		return -ENODEV;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	/* Initialize the CPM interrupt controller. */
+	out_be32(&data->reg->cpic_cicr,
+		 (CICR_SCD_SCC4 | CICR_SCC_SCC3 | CICR_SCB_SCC2 | CICR_SCA_SCC1) |
+		 ((virq_to_hw(irq) / 2) << 13) | CICR_HP_MASK);
+
+	out_be32(&data->reg->cpic_cimr, 0);
+
+	data->host = irq_domain_add_linear(dev->of_node, 64, &cpm_pic_host_ops, data);
+	if (!data->host)
+		return -ENODEV;
+
+	irq_set_handler_data(irq, data);
+	irq_set_chained_handler(irq, cpm_cascade);
+
+	setbits32(&data->reg->cpic_cicr, CICR_IEN);
+
+	return 0;
+}
+
+static const struct of_device_id cpm_pic_match[] = {
+	{
+		.compatible = "fsl,cpm1-pic",
+	}, {
+		.type = "cpm-pic",
+		.compatible = "CPM",
+	}, {},
+};
+
+static struct platform_driver cpm_pic_driver = {
+	.driver	= {
+		.name		= "cpm-pic",
+		.of_match_table	= cpm_pic_match,
+	},
+	.probe	= cpm_pic_probe,
+};
+
+static int __init cpm_pic_init(void)
+{
+	return platform_driver_register(&cpm_pic_driver);
+}
+arch_initcall(cpm_pic_init);
+
+/*
+ * The CPM can generate the error interrupt when there is a race condition
+ * between generating and masking interrupts.  All we have to do is ACK it
+ * and return.  This is a no-op function so we don't need any special
+ * tests in the interrupt handler.
+ */
+static irqreturn_t cpm_error_interrupt(int irq, void *dev)
+{
+	return IRQ_HANDLED;
+}
+
+static int cpm_error_probe(struct platform_device *pdev)
+{
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	return request_irq(irq, cpm_error_interrupt, IRQF_NO_THREAD, "error", NULL);
+}
+
+static const struct of_device_id cpm_error_ids[] = {
+	{ .compatible = "fsl,cpm1" },
+	{ .type = "cpm" },
+	{},
+};
+
+static struct platform_driver cpm_error_driver = {
+	.driver	= {
+		.name		= "cpm-error",
+		.of_match_table	= cpm_error_ids,
+	},
+	.probe	= cpm_error_probe,
+};
+
+static int __init cpm_error_init(void)
+{
+	return platform_driver_register(&cpm_error_driver);
+}
+subsys_initcall(cpm_error_init);
diff --git a/arch/powerpc/platforms/8xx/cpm1.c b/arch/powerpc/platforms/8xx/cpm1.c
new file mode 100644
index 000000000..bb38c8d8f
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/cpm1.c
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * General Purpose functions for the global management of the
+ * Communication Processor Module.
+ * Copyright (c) 1997 Dan error_act (dmalek@jlc.net)
+ *
+ * In addition to the individual control of the communication
+ * channels, there are a few functions that globally affect the
+ * communication processor.
+ *
+ * Buffer descriptors must be allocated from the dual ported memory
+ * space.  The allocator for that is here.  When the communication
+ * process is reset, we reclaim the memory available.  There is
+ * currently no deallocator for this memory.
+ * The amount of space available is platform dependent.  On the
+ * MBX, the EPPC software loads additional microcode into the
+ * communication processor, and uses some of the DP ram for this
+ * purpose.  Current, the first 512 bytes and the last 256 bytes of
+ * memory are used.  Right now I am conservative and only use the
+ * memory that can never be used for microcode.  If there are
+ * applications that require more DP ram, we can expand the boundaries
+ * but then we have to be careful of any downloaded microcode.
+ */
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/dma-mapping.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <linux/of_irq.h>
+#include <asm/page.h>
+#include <asm/8xx_immap.h>
+#include <asm/cpm1.h>
+#include <asm/io.h>
+#include <asm/rheap.h>
+#include <asm/cpm.h>
+
+#include <asm/fs_pd.h>
+
+#ifdef CONFIG_8xx_GPIO
+#include <linux/of_gpio.h>
+#endif
+
+#define CPM_MAP_SIZE    (0x4000)
+
+cpm8xx_t __iomem *cpmp;  /* Pointer to comm processor space */
+immap_t __iomem *mpc8xx_immr = (void __iomem *)VIRT_IMMR_BASE;
+
+void __init cpm_reset(void)
+{
+	sysconf8xx_t __iomem *siu_conf;
+
+	cpmp = &mpc8xx_immr->im_cpm;
+
+#ifndef CONFIG_PPC_EARLY_DEBUG_CPM
+	/* Perform a reset. */
+	out_be16(&cpmp->cp_cpcr, CPM_CR_RST | CPM_CR_FLG);
+
+	/* Wait for it. */
+	while (in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG);
+#endif
+
+#ifdef CONFIG_UCODE_PATCH
+	cpm_load_patch(cpmp);
+#endif
+
+	/*
+	 * Set SDMA Bus Request priority 5.
+	 * On 860T, this also enables FEC priority 6.  I am not sure
+	 * this is what we really want for some applications, but the
+	 * manual recommends it.
+	 * Bit 25, FAM can also be set to use FEC aggressive mode (860T).
+	 */
+	siu_conf = immr_map(im_siu_conf);
+	if ((mfspr(SPRN_IMMR) & 0xffff) == 0x0900) /* MPC885 */
+		out_be32(&siu_conf->sc_sdcr, 0x40);
+	else
+		out_be32(&siu_conf->sc_sdcr, 1);
+	immr_unmap(siu_conf);
+}
+
+static DEFINE_SPINLOCK(cmd_lock);
+
+#define MAX_CR_CMD_LOOPS        10000
+
+int cpm_command(u32 command, u8 opcode)
+{
+	int i, ret;
+	unsigned long flags;
+
+	if (command & 0xffffff0f)
+		return -EINVAL;
+
+	spin_lock_irqsave(&cmd_lock, flags);
+
+	ret = 0;
+	out_be16(&cpmp->cp_cpcr, command | CPM_CR_FLG | (opcode << 8));
+	for (i = 0; i < MAX_CR_CMD_LOOPS; i++)
+		if ((in_be16(&cpmp->cp_cpcr) & CPM_CR_FLG) == 0)
+			goto out;
+
+	printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
+	ret = -EIO;
+out:
+	spin_unlock_irqrestore(&cmd_lock, flags);
+	return ret;
+}
+EXPORT_SYMBOL(cpm_command);
+
+/*
+ * Set a baud rate generator.  This needs lots of work.  There are
+ * four BRGs, any of which can be wired to any channel.
+ * The internal baud rate clock is the system clock divided by 16.
+ * This assumes the baudrate is 16x oversampled by the uart.
+ */
+#define BRG_INT_CLK		(get_brgfreq())
+#define BRG_UART_CLK		(BRG_INT_CLK/16)
+#define BRG_UART_CLK_DIV16	(BRG_UART_CLK/16)
+
+void
+cpm_setbrg(uint brg, uint rate)
+{
+	u32 __iomem *bp;
+
+	/* This is good enough to get SMCs running..... */
+	bp = &cpmp->cp_brgc1;
+	bp += brg;
+	/*
+	 * The BRG has a 12-bit counter.  For really slow baud rates (or
+	 * really fast processors), we may have to further divide by 16.
+	 */
+	if (((BRG_UART_CLK / rate) - 1) < 4096)
+		out_be32(bp, (((BRG_UART_CLK / rate) - 1) << 1) | CPM_BRG_EN);
+	else
+		out_be32(bp, (((BRG_UART_CLK_DIV16 / rate) - 1) << 1) |
+			      CPM_BRG_EN | CPM_BRG_DIV16);
+}
+EXPORT_SYMBOL(cpm_setbrg);
+
+struct cpm_ioport16 {
+	__be16 dir, par, odr_sor, dat, intr;
+	__be16 res[3];
+};
+
+struct cpm_ioport32b {
+	__be32 dir, par, odr, dat;
+};
+
+struct cpm_ioport32e {
+	__be32 dir, par, sor, odr, dat;
+};
+
+static void __init cpm1_set_pin32(int port, int pin, int flags)
+{
+	struct cpm_ioport32e __iomem *iop;
+	pin = 1 << (31 - pin);
+
+	if (port == CPM_PORTB)
+		iop = (struct cpm_ioport32e __iomem *)
+		      &mpc8xx_immr->im_cpm.cp_pbdir;
+	else
+		iop = (struct cpm_ioport32e __iomem *)
+		      &mpc8xx_immr->im_cpm.cp_pedir;
+
+	if (flags & CPM_PIN_OUTPUT)
+		setbits32(&iop->dir, pin);
+	else
+		clrbits32(&iop->dir, pin);
+
+	if (!(flags & CPM_PIN_GPIO))
+		setbits32(&iop->par, pin);
+	else
+		clrbits32(&iop->par, pin);
+
+	if (port == CPM_PORTB) {
+		if (flags & CPM_PIN_OPENDRAIN)
+			setbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
+		else
+			clrbits16(&mpc8xx_immr->im_cpm.cp_pbodr, pin);
+	}
+
+	if (port == CPM_PORTE) {
+		if (flags & CPM_PIN_SECONDARY)
+			setbits32(&iop->sor, pin);
+		else
+			clrbits32(&iop->sor, pin);
+
+		if (flags & CPM_PIN_OPENDRAIN)
+			setbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
+		else
+			clrbits32(&mpc8xx_immr->im_cpm.cp_peodr, pin);
+	}
+}
+
+static void __init cpm1_set_pin16(int port, int pin, int flags)
+{
+	struct cpm_ioport16 __iomem *iop =
+		(struct cpm_ioport16 __iomem *)&mpc8xx_immr->im_ioport;
+
+	pin = 1 << (15 - pin);
+
+	if (port != 0)
+		iop += port - 1;
+
+	if (flags & CPM_PIN_OUTPUT)
+		setbits16(&iop->dir, pin);
+	else
+		clrbits16(&iop->dir, pin);
+
+	if (!(flags & CPM_PIN_GPIO))
+		setbits16(&iop->par, pin);
+	else
+		clrbits16(&iop->par, pin);
+
+	if (port == CPM_PORTA) {
+		if (flags & CPM_PIN_OPENDRAIN)
+			setbits16(&iop->odr_sor, pin);
+		else
+			clrbits16(&iop->odr_sor, pin);
+	}
+	if (port == CPM_PORTC) {
+		if (flags & CPM_PIN_SECONDARY)
+			setbits16(&iop->odr_sor, pin);
+		else
+			clrbits16(&iop->odr_sor, pin);
+		if (flags & CPM_PIN_FALLEDGE)
+			setbits16(&iop->intr, pin);
+		else
+			clrbits16(&iop->intr, pin);
+	}
+}
+
+void __init cpm1_set_pin(enum cpm_port port, int pin, int flags)
+{
+	if (port == CPM_PORTB || port == CPM_PORTE)
+		cpm1_set_pin32(port, pin, flags);
+	else
+		cpm1_set_pin16(port, pin, flags);
+}
+
+int __init cpm1_clk_setup(enum cpm_clk_target target, int clock, int mode)
+{
+	int shift;
+	int i, bits = 0;
+	u32 __iomem *reg;
+	u32 mask = 7;
+
+	u8 clk_map[][3] = {
+		{CPM_CLK_SCC1, CPM_BRG1, 0},
+		{CPM_CLK_SCC1, CPM_BRG2, 1},
+		{CPM_CLK_SCC1, CPM_BRG3, 2},
+		{CPM_CLK_SCC1, CPM_BRG4, 3},
+		{CPM_CLK_SCC1, CPM_CLK1, 4},
+		{CPM_CLK_SCC1, CPM_CLK2, 5},
+		{CPM_CLK_SCC1, CPM_CLK3, 6},
+		{CPM_CLK_SCC1, CPM_CLK4, 7},
+
+		{CPM_CLK_SCC2, CPM_BRG1, 0},
+		{CPM_CLK_SCC2, CPM_BRG2, 1},
+		{CPM_CLK_SCC2, CPM_BRG3, 2},
+		{CPM_CLK_SCC2, CPM_BRG4, 3},
+		{CPM_CLK_SCC2, CPM_CLK1, 4},
+		{CPM_CLK_SCC2, CPM_CLK2, 5},
+		{CPM_CLK_SCC2, CPM_CLK3, 6},
+		{CPM_CLK_SCC2, CPM_CLK4, 7},
+
+		{CPM_CLK_SCC3, CPM_BRG1, 0},
+		{CPM_CLK_SCC3, CPM_BRG2, 1},
+		{CPM_CLK_SCC3, CPM_BRG3, 2},
+		{CPM_CLK_SCC3, CPM_BRG4, 3},
+		{CPM_CLK_SCC3, CPM_CLK5, 4},
+		{CPM_CLK_SCC3, CPM_CLK6, 5},
+		{CPM_CLK_SCC3, CPM_CLK7, 6},
+		{CPM_CLK_SCC3, CPM_CLK8, 7},
+
+		{CPM_CLK_SCC4, CPM_BRG1, 0},
+		{CPM_CLK_SCC4, CPM_BRG2, 1},
+		{CPM_CLK_SCC4, CPM_BRG3, 2},
+		{CPM_CLK_SCC4, CPM_BRG4, 3},
+		{CPM_CLK_SCC4, CPM_CLK5, 4},
+		{CPM_CLK_SCC4, CPM_CLK6, 5},
+		{CPM_CLK_SCC4, CPM_CLK7, 6},
+		{CPM_CLK_SCC4, CPM_CLK8, 7},
+
+		{CPM_CLK_SMC1, CPM_BRG1, 0},
+		{CPM_CLK_SMC1, CPM_BRG2, 1},
+		{CPM_CLK_SMC1, CPM_BRG3, 2},
+		{CPM_CLK_SMC1, CPM_BRG4, 3},
+		{CPM_CLK_SMC1, CPM_CLK1, 4},
+		{CPM_CLK_SMC1, CPM_CLK2, 5},
+		{CPM_CLK_SMC1, CPM_CLK3, 6},
+		{CPM_CLK_SMC1, CPM_CLK4, 7},
+
+		{CPM_CLK_SMC2, CPM_BRG1, 0},
+		{CPM_CLK_SMC2, CPM_BRG2, 1},
+		{CPM_CLK_SMC2, CPM_BRG3, 2},
+		{CPM_CLK_SMC2, CPM_BRG4, 3},
+		{CPM_CLK_SMC2, CPM_CLK5, 4},
+		{CPM_CLK_SMC2, CPM_CLK6, 5},
+		{CPM_CLK_SMC2, CPM_CLK7, 6},
+		{CPM_CLK_SMC2, CPM_CLK8, 7},
+	};
+
+	switch (target) {
+	case CPM_CLK_SCC1:
+		reg = &mpc8xx_immr->im_cpm.cp_sicr;
+		shift = 0;
+		break;
+
+	case CPM_CLK_SCC2:
+		reg = &mpc8xx_immr->im_cpm.cp_sicr;
+		shift = 8;
+		break;
+
+	case CPM_CLK_SCC3:
+		reg = &mpc8xx_immr->im_cpm.cp_sicr;
+		shift = 16;
+		break;
+
+	case CPM_CLK_SCC4:
+		reg = &mpc8xx_immr->im_cpm.cp_sicr;
+		shift = 24;
+		break;
+
+	case CPM_CLK_SMC1:
+		reg = &mpc8xx_immr->im_cpm.cp_simode;
+		shift = 12;
+		break;
+
+	case CPM_CLK_SMC2:
+		reg = &mpc8xx_immr->im_cpm.cp_simode;
+		shift = 28;
+		break;
+
+	default:
+		printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n");
+		return -EINVAL;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(clk_map); i++) {
+		if (clk_map[i][0] == target && clk_map[i][1] == clock) {
+			bits = clk_map[i][2];
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(clk_map)) {
+		printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n");
+		return -EINVAL;
+	}
+
+	bits <<= shift;
+	mask <<= shift;
+
+	if (reg == &mpc8xx_immr->im_cpm.cp_sicr) {
+		if (mode == CPM_CLK_RTX) {
+			bits |= bits << 3;
+			mask |= mask << 3;
+		} else if (mode == CPM_CLK_RX) {
+			bits <<= 3;
+			mask <<= 3;
+		}
+	}
+
+	out_be32(reg, (in_be32(reg) & ~mask) | bits);
+
+	return 0;
+}
+
+/*
+ * GPIO LIB API implementation
+ */
+#ifdef CONFIG_8xx_GPIO
+
+struct cpm1_gpio16_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u16 cpdata;
+
+	/* IRQ associated with Pins when relevant */
+	int irq[16];
+};
+
+static void cpm1_gpio16_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio16_chip *cpm1_gc =
+		container_of(mm_gc, struct cpm1_gpio16_chip, mm_gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be16(&iop->dat);
+}
+
+static int cpm1_gpio16_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	u16 pin_mask;
+
+	pin_mask = 1 << (15 - gpio);
+
+	return !!(in_be16(&iop->dat) & pin_mask);
+}
+
+static void __cpm1_gpio16_set(struct of_mm_gpio_chip *mm_gc, u16 pin_mask,
+	int value)
+{
+	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be16(&iop->dat, cpm1_gc->cpdata);
+}
+
+static void cpm1_gpio16_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	__cpm1_gpio16_set(mm_gc, pin_mask, value);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio16_to_irq(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+
+	return cpm1_gc->irq[gpio] ? : -ENXIO;
+}
+
+static int cpm1_gpio16_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	setbits16(&iop->dir, pin_mask);
+	__cpm1_gpio16_set(mm_gc, pin_mask, val);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
+	return 0;
+}
+
+static int cpm1_gpio16_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio16_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	struct cpm_ioport16 __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u16 pin_mask = 1 << (15 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	clrbits16(&iop->dir, pin_mask);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add16(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct cpm1_gpio16_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct gpio_chip *gc;
+	u16 mask;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	if (!of_property_read_u16(np, "fsl,cpm1-gpio-irq-mask", &mask)) {
+		int i, j;
+
+		for (i = 0, j = 0; i < 16; i++)
+			if (mask & (1 << (15 - i)))
+				cpm1_gc->irq[i] = irq_of_parse_and_map(np, j++);
+	}
+
+	mm_gc = &cpm1_gc->mm_gc;
+	gc = &mm_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio16_save_regs;
+	gc->ngpio = 16;
+	gc->direction_input = cpm1_gpio16_dir_in;
+	gc->direction_output = cpm1_gpio16_dir_out;
+	gc->get = cpm1_gpio16_get;
+	gc->set = cpm1_gpio16_set;
+	gc->to_irq = cpm1_gpio16_to_irq;
+	gc->parent = dev;
+	gc->owner = THIS_MODULE;
+
+	return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
+}
+
+struct cpm1_gpio32_chip {
+	struct of_mm_gpio_chip mm_gc;
+	spinlock_t lock;
+
+	/* shadowed data register to clear/set bits safely */
+	u32 cpdata;
+};
+
+static void cpm1_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct cpm1_gpio32_chip *cpm1_gc =
+		container_of(mm_gc, struct cpm1_gpio32_chip, mm_gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+	cpm1_gc->cpdata = in_be32(&iop->dat);
+}
+
+static int cpm1_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	u32 pin_mask;
+
+	pin_mask = 1 << (31 - gpio);
+
+	return !!(in_be32(&iop->dat) & pin_mask);
+}
+
+static void __cpm1_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
+	int value)
+{
+	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+
+	if (value)
+		cpm1_gc->cpdata |= pin_mask;
+	else
+		cpm1_gc->cpdata &= ~pin_mask;
+
+	out_be32(&iop->dat, cpm1_gc->cpdata);
+}
+
+static void cpm1_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	__cpm1_gpio32_set(mm_gc, pin_mask, value);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+}
+
+static int cpm1_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	setbits32(&iop->dir, pin_mask);
+	__cpm1_gpio32_set(mm_gc, pin_mask, val);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
+	return 0;
+}
+
+static int cpm1_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct cpm1_gpio32_chip *cpm1_gc = gpiochip_get_data(&mm_gc->gc);
+	struct cpm_ioport32b __iomem *iop = mm_gc->regs;
+	unsigned long flags;
+	u32 pin_mask = 1 << (31 - gpio);
+
+	spin_lock_irqsave(&cpm1_gc->lock, flags);
+
+	clrbits32(&iop->dir, pin_mask);
+
+	spin_unlock_irqrestore(&cpm1_gc->lock, flags);
+
+	return 0;
+}
+
+int cpm1_gpiochip_add32(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct cpm1_gpio32_chip *cpm1_gc;
+	struct of_mm_gpio_chip *mm_gc;
+	struct gpio_chip *gc;
+
+	cpm1_gc = kzalloc(sizeof(*cpm1_gc), GFP_KERNEL);
+	if (!cpm1_gc)
+		return -ENOMEM;
+
+	spin_lock_init(&cpm1_gc->lock);
+
+	mm_gc = &cpm1_gc->mm_gc;
+	gc = &mm_gc->gc;
+
+	mm_gc->save_regs = cpm1_gpio32_save_regs;
+	gc->ngpio = 32;
+	gc->direction_input = cpm1_gpio32_dir_in;
+	gc->direction_output = cpm1_gpio32_dir_out;
+	gc->get = cpm1_gpio32_get;
+	gc->set = cpm1_gpio32_set;
+	gc->parent = dev;
+	gc->owner = THIS_MODULE;
+
+	return of_mm_gpiochip_add_data(np, mm_gc, cpm1_gc);
+}
+
+#endif /* CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/platforms/8xx/ep88xc.c b/arch/powerpc/platforms/8xx/ep88xc.c
new file mode 100644
index 000000000..b3b22520b
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/ep88xc.c
@@ -0,0 +1,175 @@
+/*
+ * Platform setup for the Embedded Planet EP88xC board
+ *
+ * Author: Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/machdep.h>
+#include <asm/io.h>
+#include <asm/udbg.h>
+#include <asm/cpm1.h>
+
+#include "mpc8xx.h"
+#include "pic.h"
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct cpm_pin ep88xc_pins[] = {
+	/* SMC1 */
+	{1, 24, CPM_PIN_INPUT}, /* RX */
+	{1, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+	/* SCC2 */
+	{0, 12, CPM_PIN_INPUT}, /* TX */
+	{0, 13, CPM_PIN_INPUT}, /* RX */
+	{2, 8, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CD */
+	{2, 9, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CTS */
+	{2, 14, CPM_PIN_INPUT}, /* RTS */
+
+	/* MII1 */
+	{0, 0, CPM_PIN_INPUT},
+	{0, 1, CPM_PIN_INPUT},
+	{0, 2, CPM_PIN_INPUT},
+	{0, 3, CPM_PIN_INPUT},
+	{0, 4, CPM_PIN_OUTPUT},
+	{0, 10, CPM_PIN_OUTPUT},
+	{0, 11, CPM_PIN_OUTPUT},
+	{1, 19, CPM_PIN_INPUT},
+	{1, 31, CPM_PIN_INPUT},
+	{2, 12, CPM_PIN_INPUT},
+	{2, 13, CPM_PIN_INPUT},
+	{3, 8, CPM_PIN_INPUT},
+	{4, 30, CPM_PIN_OUTPUT},
+	{4, 31, CPM_PIN_OUTPUT},
+
+	/* MII2 */
+	{4, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{4, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{4, 16, CPM_PIN_OUTPUT},
+	{4, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{4, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{4, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{4, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{4, 21, CPM_PIN_OUTPUT},
+	{4, 22, CPM_PIN_OUTPUT},
+	{4, 23, CPM_PIN_OUTPUT},
+	{4, 24, CPM_PIN_OUTPUT},
+	{4, 25, CPM_PIN_OUTPUT},
+	{4, 26, CPM_PIN_OUTPUT},
+	{4, 27, CPM_PIN_OUTPUT},
+	{4, 28, CPM_PIN_OUTPUT},
+	{4, 29, CPM_PIN_OUTPUT},
+
+	/* USB */
+	{0, 6, CPM_PIN_INPUT},  /* CLK2 */
+	{0, 14, CPM_PIN_INPUT}, /* USBOE */
+	{0, 15, CPM_PIN_INPUT}, /* USBRXD */
+	{2, 6, CPM_PIN_OUTPUT}, /* USBTXN */
+	{2, 7, CPM_PIN_OUTPUT}, /* USBTXP */
+	{2, 10, CPM_PIN_INPUT}, /* USBRXN */
+	{2, 11, CPM_PIN_INPUT}, /* USBRXP */
+
+	/* Misc */
+	{1, 26, CPM_PIN_INPUT}, /* BRGO2 */
+	{1, 27, CPM_PIN_INPUT}, /* BRGO1 */
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ep88xc_pins); i++) {
+		struct cpm_pin *pin = &ep88xc_pins[i];
+		cpm1_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+	cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_TX); /* USB */
+	cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX);
+	cpm1_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_TX);
+	cpm1_clk_setup(CPM_CLK_SCC2, CPM_BRG2, CPM_CLK_RX);
+}
+
+static u8 __iomem *ep88xc_bcsr;
+
+#define BCSR7_SCC2_ENABLE 0x10
+
+#define BCSR8_PHY1_ENABLE 0x80
+#define BCSR8_PHY1_POWER  0x40
+#define BCSR8_PHY2_ENABLE 0x20
+#define BCSR8_PHY2_POWER  0x10
+
+#define BCSR9_USB_ENABLE  0x80
+#define BCSR9_USB_POWER   0x40
+#define BCSR9_USB_HOST    0x20
+#define BCSR9_USB_FULL_SPEED_TARGET 0x10
+
+static void __init ep88xc_setup_arch(void)
+{
+	struct device_node *np;
+
+	cpm_reset();
+	init_ioports();
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,ep88xc-bcsr");
+	if (!np) {
+		printk(KERN_CRIT "Could not find fsl,ep88xc-bcsr node\n");
+		return;
+	}
+
+	ep88xc_bcsr = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (!ep88xc_bcsr) {
+		printk(KERN_CRIT "Could not remap BCSR\n");
+		return;
+	}
+
+	setbits8(&ep88xc_bcsr[7], BCSR7_SCC2_ENABLE);
+	setbits8(&ep88xc_bcsr[8], BCSR8_PHY1_ENABLE | BCSR8_PHY1_POWER |
+	                          BCSR8_PHY2_ENABLE | BCSR8_PHY2_POWER);
+}
+
+static int __init ep88xc_probe(void)
+{
+	return of_machine_is_compatible("fsl,ep88xc");
+}
+
+static const struct of_device_id of_bus_ids[] __initconst = {
+	{ .name = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(ep88xc, declare_of_platform_devices);
+
+define_machine(ep88xc) {
+	.name = "Embedded Planet EP88xC",
+	.probe = ep88xc_probe,
+	.setup_arch = ep88xc_setup_arch,
+	.init_IRQ = mpc8xx_pic_init,
+	.get_irq	= mpc8xx_get_irq,
+	.restart = mpc8xx_restart,
+	.calibrate_decr = mpc8xx_calibrate_decr,
+	.progress = udbg_progress,
+};
diff --git a/arch/powerpc/platforms/8xx/m8xx_setup.c b/arch/powerpc/platforms/8xx/m8xx_setup.c
new file mode 100644
index 000000000..24f358f86
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/m8xx_setup.c
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Adapted from 'alpha' version by Gary Thomas
+ *  Modified by Cort Dougan (cort@cs.nmt.edu)
+ *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
+ *  Further modified for generic 8xx by Dan.
+ */
+
+/*
+ * bootup setup stuff..
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/rtc.h>
+#include <linux/fsl_devices.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+
+#include <asm/io.h>
+#include <asm/8xx_immap.h>
+#include <asm/fs_pd.h>
+#include <mm/mmu_decl.h>
+
+#include "pic.h"
+
+#include "mpc8xx.h"
+
+/* A place holder for time base interrupts, if they are ever enabled. */
+static irqreturn_t timebase_interrupt(int irq, void *dev)
+{
+	printk ("timebase_interrupt()\n");
+
+	return IRQ_HANDLED;
+}
+
+/* per-board overridable init_internal_rtc() function. */
+void __init __attribute__ ((weak))
+init_internal_rtc(void)
+{
+	sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
+
+	/* Disable the RTC one second and alarm interrupts. */
+	clrbits16(&sys_tmr->sit_rtcsc, (RTCSC_SIE | RTCSC_ALE));
+
+	/* Enable the RTC */
+	setbits16(&sys_tmr->sit_rtcsc, (RTCSC_RTF | RTCSC_RTE));
+	immr_unmap(sys_tmr);
+}
+
+static int __init get_freq(char *name, unsigned long *val)
+{
+	struct device_node *cpu;
+	const unsigned int *fp;
+	int found = 0;
+
+	/* The cpu node should have timebase and clock frequency properties */
+	cpu = of_get_cpu_node(0, NULL);
+
+	if (cpu) {
+		fp = of_get_property(cpu, name, NULL);
+		if (fp) {
+			found = 1;
+			*val = *fp;
+		}
+
+		of_node_put(cpu);
+	}
+
+	return found;
+}
+
+/* The decrementer counts at the system (internal) clock frequency divided by
+ * sixteen, or external oscillator divided by four.  We force the processor
+ * to use system clock divided by sixteen.
+ */
+void __init mpc8xx_calibrate_decr(void)
+{
+	struct device_node *cpu;
+	cark8xx_t __iomem *clk_r1;
+	car8xx_t __iomem *clk_r2;
+	sitk8xx_t __iomem *sys_tmr1;
+	sit8xx_t __iomem *sys_tmr2;
+	int irq, virq;
+
+	clk_r1 = immr_map(im_clkrstk);
+
+	/* Unlock the SCCR. */
+	out_be32(&clk_r1->cark_sccrk, ~KAPWR_KEY);
+	out_be32(&clk_r1->cark_sccrk, KAPWR_KEY);
+	immr_unmap(clk_r1);
+
+	/* Force all 8xx processors to use divide by 16 processor clock. */
+	clk_r2 = immr_map(im_clkrst);
+	setbits32(&clk_r2->car_sccr, 0x02000000);
+	immr_unmap(clk_r2);
+
+	/* Processor frequency is MHz.
+	 */
+	ppc_proc_freq = 50000000;
+	if (!get_freq("clock-frequency", &ppc_proc_freq))
+		printk(KERN_ERR "WARNING: Estimating processor frequency "
+		                "(not found)\n");
+
+	ppc_tb_freq = ppc_proc_freq / 16;
+	printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
+
+	/* Perform some more timer/timebase initialization.  This used
+	 * to be done elsewhere, but other changes caused it to get
+	 * called more than once....that is a bad thing.
+	 *
+	 * First, unlock all of the registers we are going to modify.
+	 * To protect them from corruption during power down, registers
+	 * that are maintained by keep alive power are "locked".  To
+	 * modify these registers we have to write the key value to
+	 * the key location associated with the register.
+	 * Some boards power up with these unlocked, while others
+	 * are locked.  Writing anything (including the unlock code?)
+	 * to the unlocked registers will lock them again.  So, here
+	 * we guarantee the registers are locked, then we unlock them
+	 * for our use.
+	 */
+	sys_tmr1 = immr_map(im_sitk);
+	out_be32(&sys_tmr1->sitk_tbscrk, ~KAPWR_KEY);
+	out_be32(&sys_tmr1->sitk_rtcsck, ~KAPWR_KEY);
+	out_be32(&sys_tmr1->sitk_tbk, ~KAPWR_KEY);
+	out_be32(&sys_tmr1->sitk_tbscrk, KAPWR_KEY);
+	out_be32(&sys_tmr1->sitk_rtcsck, KAPWR_KEY);
+	out_be32(&sys_tmr1->sitk_tbk, KAPWR_KEY);
+	immr_unmap(sys_tmr1);
+
+	init_internal_rtc();
+
+	/* Enabling the decrementer also enables the timebase interrupts
+	 * (or from the other point of view, to get decrementer interrupts
+	 * we have to enable the timebase).  The decrementer interrupt
+	 * is wired into the vector table, nothing to do here for that.
+	 */
+	cpu = of_get_cpu_node(0, NULL);
+	virq= irq_of_parse_and_map(cpu, 0);
+	of_node_put(cpu);
+	irq = virq_to_hw(virq);
+
+	sys_tmr2 = immr_map(im_sit);
+	out_be16(&sys_tmr2->sit_tbscr, ((1 << (7 - (irq/2))) << 8) |
+					(TBSCR_TBF | TBSCR_TBE));
+	immr_unmap(sys_tmr2);
+
+	if (request_irq(virq, timebase_interrupt, IRQF_NO_THREAD, "tbint",
+			NULL))
+		panic("Could not allocate timer IRQ!");
+}
+
+/* The RTC on the MPC8xx is an internal register.
+ * We want to protect this during power down, so we need to unlock,
+ * modify, and re-lock.
+ */
+
+int mpc8xx_set_rtc_time(struct rtc_time *tm)
+{
+	sitk8xx_t __iomem *sys_tmr1;
+	sit8xx_t __iomem *sys_tmr2;
+	time64_t time;
+
+	sys_tmr1 = immr_map(im_sitk);
+	sys_tmr2 = immr_map(im_sit);
+	time = rtc_tm_to_time64(tm);
+
+	out_be32(&sys_tmr1->sitk_rtck, KAPWR_KEY);
+	out_be32(&sys_tmr2->sit_rtc, (u32)time);
+	out_be32(&sys_tmr1->sitk_rtck, ~KAPWR_KEY);
+
+	immr_unmap(sys_tmr2);
+	immr_unmap(sys_tmr1);
+	return 0;
+}
+
+void mpc8xx_get_rtc_time(struct rtc_time *tm)
+{
+	unsigned long data;
+	sit8xx_t __iomem *sys_tmr = immr_map(im_sit);
+
+	/* Get time from the RTC. */
+	data = in_be32(&sys_tmr->sit_rtc);
+	rtc_time64_to_tm(data, tm);
+	immr_unmap(sys_tmr);
+	return;
+}
+
+void __noreturn mpc8xx_restart(char *cmd)
+{
+	car8xx_t __iomem *clk_r = immr_map(im_clkrst);
+
+
+	local_irq_disable();
+
+	setbits32(&clk_r->car_plprcr, 0x00000080);
+	/* Clear the ME bit in MSR to cause checkstop on machine check
+	*/
+	mtmsr(mfmsr() & ~0x1000);
+
+	in_8(&clk_r->res[0]);
+	panic("Restart failed\n");
+}
diff --git a/arch/powerpc/platforms/8xx/machine_check.c b/arch/powerpc/platforms/8xx/machine_check.c
new file mode 100644
index 000000000..656365975
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/machine_check.c
@@ -0,0 +1,34 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ */
+
+#include <linux/kernel.h>
+#include <linux/printk.h>
+#include <linux/ptrace.h>
+
+#include <asm/reg.h>
+
+int machine_check_8xx(struct pt_regs *regs)
+{
+	unsigned long reason = regs->msr;
+
+	pr_err("Machine check in kernel mode.\n");
+	pr_err("Caused by (from SRR1=%lx): ", reason);
+	if (reason & 0x40000000)
+		pr_cont("Fetch error at address %lx\n", regs->nip);
+	else
+		pr_cont("Data access error at address %lx\n", regs->dar);
+
+#ifdef CONFIG_PCI
+	/* the qspan pci read routines can cause machine checks -- Cort
+	 *
+	 * yuck !!! that totally needs to go away ! There are better ways
+	 * to deal with that than having a wart in the mcheck handler.
+	 * -- BenH
+	 */
+	bad_page_fault(regs, SIGBUS);
+	return 1;
+#else
+	return 0;
+#endif
+}
diff --git a/arch/powerpc/platforms/8xx/mpc86xads.h b/arch/powerpc/platforms/8xx/mpc86xads.h
new file mode 100644
index 000000000..17b1fe75e
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mpc86xads.h
@@ -0,0 +1,47 @@
+/*
+ * A collection of structures, addresses, and values associated with
+ * the Freescale MPC86xADS board.
+ * Copied from the FADS stuff.
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * 2005 (c) MontaVista Software, Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2.  This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_MPC86XADS_H__
+#define __ASM_MPC86XADS_H__
+
+/* Bits of interest in the BCSRs.
+ */
+#define BCSR1_ETHEN		((uint)0x20000000)
+#define BCSR1_IRDAEN		((uint)0x10000000)
+#define BCSR1_RS232EN_1		((uint)0x01000000)
+#define BCSR1_PCCEN		((uint)0x00800000)
+#define BCSR1_PCCVCC0		((uint)0x00400000)
+#define BCSR1_PCCVPP0		((uint)0x00200000)
+#define BCSR1_PCCVPP1		((uint)0x00100000)
+#define BCSR1_PCCVPP_MASK	(BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
+#define BCSR1_RS232EN_2		((uint)0x00040000)
+#define BCSR1_PCCVCC1		((uint)0x00010000)
+#define BCSR1_PCCVCC_MASK	(BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
+
+#define BCSR4_ETH10_RST		((uint)0x80000000)	/* 10Base-T PHY reset*/
+#define BCSR4_USB_LO_SPD	((uint)0x04000000)
+#define BCSR4_USB_VCC		((uint)0x02000000)
+#define BCSR4_USB_FULL_SPD	((uint)0x00040000)
+#define BCSR4_USB_EN		((uint)0x00020000)
+
+#define BCSR5_MII2_EN		0x40
+#define BCSR5_MII2_RST		0x20
+#define BCSR5_T1_RST		0x10
+#define BCSR5_ATM155_RST	0x08
+#define BCSR5_ATM25_RST		0x04
+#define BCSR5_MII1_EN		0x02
+#define BCSR5_MII1_RST		0x01
+
+#endif /* __ASM_MPC86XADS_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/8xx/mpc86xads_setup.c b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
new file mode 100644
index 000000000..03267e4a4
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mpc86xads_setup.c
@@ -0,0 +1,151 @@
+/*arch/powerpc/platforms/8xx/mpc86xads_setup.c
+ *
+ * Platform setup for the Freescale mpc86xads board
+ *
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * Heavily modified by Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/8xx_immap.h>
+#include <asm/cpm1.h>
+#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+
+#include "mpc86xads.h"
+#include "mpc8xx.h"
+#include "pic.h"
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct cpm_pin mpc866ads_pins[] = {
+	/* SMC1 */
+	{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+	/* SMC2 */
+	{CPM_PORTB, 21, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTB, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+	/* SCC1 */
+	{CPM_PORTA, 6, CPM_PIN_INPUT}, /* CLK1 */
+	{CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */
+	{CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */
+	{CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTB, 19, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
+	{CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
+	{CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
+
+	/* MII */
+	{CPM_PORTD, 3, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 4, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 5, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 6, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 7, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 8, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 9, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 10, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 11, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 12, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 13, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 14, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 15, CPM_PIN_OUTPUT},
+
+	/* I2C */
+	{CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+	{CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mpc866ads_pins); i++) {
+		struct cpm_pin *pin = &mpc866ads_pins[i];
+		cpm1_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+	cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
+	cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK1, CPM_CLK_TX);
+	cpm1_clk_setup(CPM_CLK_SCC1, CPM_CLK2, CPM_CLK_RX);
+
+	/* Set FEC1 and FEC2 to MII mode */
+	clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
+}
+
+static void __init mpc86xads_setup_arch(void)
+{
+	struct device_node *np;
+	u32 __iomem *bcsr_io;
+
+	cpm_reset();
+	init_ioports();
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc866ads-bcsr");
+	if (!np) {
+		printk(KERN_CRIT "Could not find fsl,mpc866ads-bcsr node\n");
+		return;
+	}
+
+	bcsr_io = of_iomap(np, 0);
+	of_node_put(np);
+
+	if (bcsr_io == NULL) {
+		printk(KERN_CRIT "Could not remap BCSR\n");
+		return;
+	}
+
+	clrbits32(bcsr_io, BCSR1_RS232EN_1 | BCSR1_RS232EN_2 | BCSR1_ETHEN);
+	iounmap(bcsr_io);
+}
+
+static int __init mpc86xads_probe(void)
+{
+	return of_machine_is_compatible("fsl,mpc866ads");
+}
+
+static const struct of_device_id of_bus_ids[] __initconst = {
+	{ .name = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(mpc86x_ads, declare_of_platform_devices);
+
+define_machine(mpc86x_ads) {
+	.name			= "MPC86x ADS",
+	.probe			= mpc86xads_probe,
+	.setup_arch		= mpc86xads_setup_arch,
+	.init_IRQ		= mpc8xx_pic_init,
+	.get_irq		= mpc8xx_get_irq,
+	.restart		= mpc8xx_restart,
+	.calibrate_decr		= mpc8xx_calibrate_decr,
+	.set_rtc_time		= mpc8xx_set_rtc_time,
+	.get_rtc_time		= mpc8xx_get_rtc_time,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/8xx/mpc885ads.h b/arch/powerpc/platforms/8xx/mpc885ads.h
new file mode 100644
index 000000000..19412f76f
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mpc885ads.h
@@ -0,0 +1,49 @@
+/*
+ * A collection of structures, addresses, and values associated with
+ * the Freescale MPC885ADS board.
+ * Copied from the FADS stuff.
+ *
+ * Author: MontaVista Software, Inc.
+ *         source@mvista.com
+ *
+ * 2005 (c) MontaVista Software, Inc.  This file is licensed under the
+ * terms of the GNU General Public License version 2.  This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_MPC885ADS_H__
+#define __ASM_MPC885ADS_H__
+
+#include <sysdev/fsl_soc.h>
+
+/* Bits of interest in the BCSRs.
+ */
+#define BCSR1_ETHEN		((uint)0x20000000)
+#define BCSR1_IRDAEN		((uint)0x10000000)
+#define BCSR1_RS232EN_1		((uint)0x01000000)
+#define BCSR1_PCCEN		((uint)0x00800000)
+#define BCSR1_PCCVCC0		((uint)0x00400000)
+#define BCSR1_PCCVPP0		((uint)0x00200000)
+#define BCSR1_PCCVPP1		((uint)0x00100000)
+#define BCSR1_PCCVPP_MASK	(BCSR1_PCCVPP0 | BCSR1_PCCVPP1)
+#define BCSR1_RS232EN_2		((uint)0x00040000)
+#define BCSR1_PCCVCC1		((uint)0x00010000)
+#define BCSR1_PCCVCC_MASK	(BCSR1_PCCVCC0 | BCSR1_PCCVCC1)
+
+#define BCSR4_ETH10_RST		((uint)0x80000000)	/* 10Base-T PHY reset*/
+#define BCSR4_USB_LO_SPD	((uint)0x04000000)
+#define BCSR4_USB_VCC		((uint)0x02000000)
+#define BCSR4_USB_FULL_SPD	((uint)0x00040000)
+#define BCSR4_USB_EN		((uint)0x00020000)
+
+#define BCSR5_MII2_EN		0x40
+#define BCSR5_MII2_RST		0x20
+#define BCSR5_T1_RST		0x10
+#define BCSR5_ATM155_RST	0x08
+#define BCSR5_ATM25_RST		0x04
+#define BCSR5_MII1_EN		0x02
+#define BCSR5_MII1_RST		0x01
+
+#endif /* __ASM_MPC885ADS_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/powerpc/platforms/8xx/mpc885ads_setup.c b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
new file mode 100644
index 000000000..b1e39f96d
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mpc885ads_setup.c
@@ -0,0 +1,225 @@
+/*
+ * Platform setup for the Freescale mpc885ads board
+ *
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * Heavily modified by Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+
+#include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
+#include <linux/fsl_devices.h>
+#include <linux/mii.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/time.h>
+#include <asm/8xx_immap.h>
+#include <asm/cpm1.h>
+#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+
+#include "mpc885ads.h"
+#include "mpc8xx.h"
+#include "pic.h"
+
+static u32 __iomem *bcsr, *bcsr5;
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct cpm_pin mpc885ads_pins[] = {
+	/* SMC1 */
+	{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+	/* SMC2 */
+#ifndef CONFIG_MPC8xx_SECOND_ETH_FEC2
+	{CPM_PORTE, 21, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTE, 20, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+#endif
+
+	/* SCC3 */
+	{CPM_PORTA, 9, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTA, 8, CPM_PIN_INPUT}, /* TX */
+	{CPM_PORTC, 4, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* RENA */
+	{CPM_PORTC, 5, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO}, /* CLSN */
+	{CPM_PORTE, 27, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
+	{CPM_PORTE, 17, CPM_PIN_INPUT}, /* CLK5 */
+	{CPM_PORTE, 16, CPM_PIN_INPUT}, /* CLK6 */
+
+	/* MII1 */
+	{CPM_PORTA, 0, CPM_PIN_INPUT},
+	{CPM_PORTA, 1, CPM_PIN_INPUT},
+	{CPM_PORTA, 2, CPM_PIN_INPUT},
+	{CPM_PORTA, 3, CPM_PIN_INPUT},
+	{CPM_PORTA, 4, CPM_PIN_OUTPUT},
+	{CPM_PORTA, 10, CPM_PIN_OUTPUT},
+	{CPM_PORTA, 11, CPM_PIN_OUTPUT},
+	{CPM_PORTB, 19, CPM_PIN_INPUT},
+	{CPM_PORTB, 31, CPM_PIN_INPUT},
+	{CPM_PORTC, 12, CPM_PIN_INPUT},
+	{CPM_PORTC, 13, CPM_PIN_INPUT},
+	{CPM_PORTE, 30, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 31, CPM_PIN_OUTPUT},
+
+	/* MII2 */
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+	{CPM_PORTE, 14, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 15, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 16, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 17, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 18, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 19, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 20, CPM_PIN_OUTPUT | CPM_PIN_SECONDARY},
+	{CPM_PORTE, 21, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 22, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 23, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 24, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 25, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 26, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 27, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 28, CPM_PIN_OUTPUT},
+	{CPM_PORTE, 29, CPM_PIN_OUTPUT},
+#endif
+	/* I2C */
+	{CPM_PORTB, 26, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+	{CPM_PORTB, 27, CPM_PIN_INPUT | CPM_PIN_OPENDRAIN},
+};
+
+static void __init init_ioports(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(mpc885ads_pins); i++) {
+		struct cpm_pin *pin = &mpc885ads_pins[i];
+		cpm1_set_pin(pin->port, pin->pin, pin->flags);
+	}
+
+	cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+	cpm1_clk_setup(CPM_CLK_SMC2, CPM_BRG2, CPM_CLK_RTX);
+	cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK5, CPM_CLK_TX);
+	cpm1_clk_setup(CPM_CLK_SCC3, CPM_CLK6, CPM_CLK_RX);
+
+	/* Set FEC1 and FEC2 to MII mode */
+	clrbits32(&mpc8xx_immr->im_cpm.cp_cptr, 0x00000180);
+}
+
+static void __init mpc885ads_setup_arch(void)
+{
+	struct device_node *np;
+
+	cpm_reset();
+	init_ioports();
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc885ads-bcsr");
+	if (!np) {
+		printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
+		return;
+	}
+
+	bcsr = of_iomap(np, 0);
+	bcsr5 = of_iomap(np, 1);
+	of_node_put(np);
+
+	if (!bcsr || !bcsr5) {
+		printk(KERN_CRIT "Could not remap BCSR\n");
+		return;
+	}
+
+	clrbits32(&bcsr[1], BCSR1_RS232EN_1);
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+	setbits32(&bcsr[1], BCSR1_RS232EN_2);
+#else
+	clrbits32(&bcsr[1], BCSR1_RS232EN_2);
+#endif
+
+	clrbits32(bcsr5, BCSR5_MII1_EN);
+	setbits32(bcsr5, BCSR5_MII1_RST);
+	udelay(1000);
+	clrbits32(bcsr5, BCSR5_MII1_RST);
+
+#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
+	clrbits32(bcsr5, BCSR5_MII2_EN);
+	setbits32(bcsr5, BCSR5_MII2_RST);
+	udelay(1000);
+	clrbits32(bcsr5, BCSR5_MII2_RST);
+#else
+	setbits32(bcsr5, BCSR5_MII2_EN);
+#endif
+
+#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
+	clrbits32(&bcsr[4], BCSR4_ETH10_RST);
+	udelay(1000);
+	setbits32(&bcsr[4], BCSR4_ETH10_RST);
+
+	setbits32(&bcsr[1], BCSR1_ETHEN);
+
+	np = of_find_node_by_path("/soc@ff000000/cpm@9c0/serial@a80");
+#else
+	np = of_find_node_by_path("/soc@ff000000/cpm@9c0/ethernet@a40");
+#endif
+
+	/* The SCC3 enet registers overlap the SMC1 registers, so
+	 * one of the two must be removed from the device tree.
+	 */
+
+	if (np) {
+		of_detach_node(np);
+		of_node_put(np);
+	}
+}
+
+static int __init mpc885ads_probe(void)
+{
+	return of_machine_is_compatible("fsl,mpc885ads");
+}
+
+static const struct of_device_id of_bus_ids[] __initconst = {
+	{ .name = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	/* Publish the QE devices */
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(mpc885_ads, declare_of_platform_devices);
+
+define_machine(mpc885_ads) {
+	.name			= "Freescale MPC885 ADS",
+	.probe			= mpc885ads_probe,
+	.setup_arch		= mpc885ads_setup_arch,
+	.init_IRQ		= mpc8xx_pic_init,
+	.get_irq		= mpc8xx_get_irq,
+	.restart		= mpc8xx_restart,
+	.calibrate_decr		= mpc8xx_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/8xx/mpc8xx.h b/arch/powerpc/platforms/8xx/mpc8xx.h
new file mode 100644
index 000000000..79fae3324
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/mpc8xx.h
@@ -0,0 +1,20 @@
+/*
+ * Prototypes, etc. for the Freescale MPC8xx embedded cpu chips
+ * May need to be cleaned as the port goes on ...
+ *
+ * Copyright (C) 2008 Jochen Friedrich <jochen@scram.de>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef __MPC8xx_H
+#define __MPC8xx_H
+
+extern void __noreturn mpc8xx_restart(char *cmd);
+extern void mpc8xx_calibrate_decr(void);
+extern int mpc8xx_set_rtc_time(struct rtc_time *tm);
+extern void mpc8xx_get_rtc_time(struct rtc_time *tm);
+extern unsigned int mpc8xx_get_irq(void);
+
+#endif /* __MPC8xx_H */
diff --git a/arch/powerpc/platforms/8xx/pic.c b/arch/powerpc/platforms/8xx/pic.c
new file mode 100644
index 000000000..ea6b0e523
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/pic.c
@@ -0,0 +1,155 @@
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/8xx_immap.h>
+
+#include "pic.h"
+
+
+#define PIC_VEC_SPURRIOUS      15
+
+static struct irq_domain *mpc8xx_pic_host;
+static unsigned long mpc8xx_cached_irq_mask;
+static sysconf8xx_t __iomem *siu_reg;
+
+static inline unsigned long mpc8xx_irqd_to_bit(struct irq_data *d)
+{
+	return 0x80000000 >> irqd_to_hwirq(d);
+}
+
+static void mpc8xx_unmask_irq(struct irq_data *d)
+{
+	mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
+}
+
+static void mpc8xx_mask_irq(struct irq_data *d)
+{
+	mpc8xx_cached_irq_mask &= ~mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
+}
+
+static void mpc8xx_ack(struct irq_data *d)
+{
+	out_be32(&siu_reg->sc_sipend, mpc8xx_irqd_to_bit(d));
+}
+
+static void mpc8xx_end_irq(struct irq_data *d)
+{
+	mpc8xx_cached_irq_mask |= mpc8xx_irqd_to_bit(d);
+	out_be32(&siu_reg->sc_simask, mpc8xx_cached_irq_mask);
+}
+
+static int mpc8xx_set_irq_type(struct irq_data *d, unsigned int flow_type)
+{
+	/* only external IRQ senses are programmable */
+	if ((flow_type & IRQ_TYPE_EDGE_FALLING) && !(irqd_to_hwirq(d) & 1)) {
+		unsigned int siel = in_be32(&siu_reg->sc_siel);
+		siel |= mpc8xx_irqd_to_bit(d);
+		out_be32(&siu_reg->sc_siel, siel);
+		irq_set_handler_locked(d, handle_edge_irq);
+	}
+	return 0;
+}
+
+static struct irq_chip mpc8xx_pic = {
+	.name = "8XX SIU",
+	.irq_unmask = mpc8xx_unmask_irq,
+	.irq_mask = mpc8xx_mask_irq,
+	.irq_ack = mpc8xx_ack,
+	.irq_eoi = mpc8xx_end_irq,
+	.irq_set_type = mpc8xx_set_irq_type,
+};
+
+unsigned int mpc8xx_get_irq(void)
+{
+	int irq;
+
+	/* For MPC8xx, read the SIVEC register and shift the bits down
+	 * to get the irq number.
+	 */
+	irq = in_be32(&siu_reg->sc_sivec) >> 26;
+
+	if (irq == PIC_VEC_SPURRIOUS)
+		return 0;
+
+        return irq_linear_revmap(mpc8xx_pic_host, irq);
+
+}
+
+static int mpc8xx_pic_host_map(struct irq_domain *h, unsigned int virq,
+			  irq_hw_number_t hw)
+{
+	pr_debug("mpc8xx_pic_host_map(%d, 0x%lx)\n", virq, hw);
+
+	/* Set default irq handle */
+	irq_set_chip_and_handler(virq, &mpc8xx_pic, handle_level_irq);
+	return 0;
+}
+
+
+static int mpc8xx_pic_host_xlate(struct irq_domain *h, struct device_node *ct,
+			    const u32 *intspec, unsigned int intsize,
+			    irq_hw_number_t *out_hwirq, unsigned int *out_flags)
+{
+	static unsigned char map_pic_senses[4] = {
+		IRQ_TYPE_EDGE_RISING,
+		IRQ_TYPE_LEVEL_LOW,
+		IRQ_TYPE_LEVEL_HIGH,
+		IRQ_TYPE_EDGE_FALLING,
+	};
+
+	if (intspec[0] > 0x1f)
+		return 0;
+
+	*out_hwirq = intspec[0];
+	if (intsize > 1 && intspec[1] < 4)
+		*out_flags = map_pic_senses[intspec[1]];
+	else
+		*out_flags = IRQ_TYPE_NONE;
+
+	return 0;
+}
+
+
+static const struct irq_domain_ops mpc8xx_pic_host_ops = {
+	.map = mpc8xx_pic_host_map,
+	.xlate = mpc8xx_pic_host_xlate,
+};
+
+void __init mpc8xx_pic_init(void)
+{
+	struct resource res;
+	struct device_node *np;
+	int ret;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,pq1-pic");
+	if (np == NULL)
+		np = of_find_node_by_type(NULL, "mpc8xx-pic");
+	if (np == NULL) {
+		printk(KERN_ERR "Could not find fsl,pq1-pic node\n");
+		return;
+	}
+
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret)
+		goto out;
+
+	siu_reg = ioremap(res.start, resource_size(&res));
+	if (!siu_reg)
+		goto out;
+
+	mpc8xx_pic_host = irq_domain_add_linear(np, 64, &mpc8xx_pic_host_ops, NULL);
+	if (!mpc8xx_pic_host)
+		printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n");
+
+out:
+	of_node_put(np);
+}
diff --git a/arch/powerpc/platforms/8xx/pic.h b/arch/powerpc/platforms/8xx/pic.h
new file mode 100644
index 000000000..c70f1b446
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/pic.h
@@ -0,0 +1,19 @@
+#ifndef _PPC_KERNEL_MPC8xx_H
+#define _PPC_KERNEL_MPC8xx_H
+
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+void mpc8xx_pic_init(void);
+unsigned int mpc8xx_get_irq(void);
+
+/*
+ * Some internal interrupt registers use an 8-bit mask for the interrupt
+ * level instead of a number.
+ */
+static inline uint mk_int_int_mask(uint mask)
+{
+	return (1 << (7 - (mask/2)));
+}
+
+#endif /* _PPC_KERNEL_PPC8xx_H */
diff --git a/arch/powerpc/platforms/8xx/tqm8xx_setup.c b/arch/powerpc/platforms/8xx/tqm8xx_setup.c
new file mode 100644
index 000000000..ffcfd17a5
--- /dev/null
+++ b/arch/powerpc/platforms/8xx/tqm8xx_setup.c
@@ -0,0 +1,156 @@
+/*
+ * Platform setup for the MPC8xx based boards from TQM.
+ *
+ * Heiko Schocher <hs@denx.de>
+ * Copyright 2010 DENX Software Engineering GmbH
+ *
+ * based on:
+ * Vitaly Bordug <vbordug@ru.mvista.com>
+ *
+ * Copyright 2005 MontaVista Software Inc.
+ *
+ * Heavily modified by Scott Wood <scottwood@freescale.com>
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <linux/init.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+
+#include <linux/fs_enet_pd.h>
+#include <linux/fs_uart_pd.h>
+#include <linux/fsl_devices.h>
+#include <linux/mii.h>
+#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
+
+#include <asm/delay.h>
+#include <asm/io.h>
+#include <asm/machdep.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/time.h>
+#include <asm/8xx_immap.h>
+#include <asm/cpm1.h>
+#include <asm/fs_pd.h>
+#include <asm/udbg.h>
+
+#include "mpc8xx.h"
+#include "pic.h"
+
+struct cpm_pin {
+	int port, pin, flags;
+};
+
+static struct cpm_pin tqm8xx_pins[] __initdata = {
+	/* SMC1 */
+	{CPM_PORTB, 24, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTB, 25, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TX */
+
+	/* SCC1 */
+	{CPM_PORTA, 5, CPM_PIN_INPUT}, /* CLK1 */
+	{CPM_PORTA, 7, CPM_PIN_INPUT}, /* CLK2 */
+	{CPM_PORTA, 14, CPM_PIN_INPUT}, /* TX */
+	{CPM_PORTA, 15, CPM_PIN_INPUT}, /* RX */
+	{CPM_PORTC, 15, CPM_PIN_INPUT | CPM_PIN_SECONDARY}, /* TENA */
+	{CPM_PORTC, 10, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
+	{CPM_PORTC, 11, CPM_PIN_INPUT | CPM_PIN_SECONDARY | CPM_PIN_GPIO},
+};
+
+static struct cpm_pin tqm8xx_fec_pins[] __initdata = {
+	/* MII */
+	{CPM_PORTD, 3, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 4, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 5, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 6, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 7, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 8, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 9, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 10, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 11, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 12, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 13, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 14, CPM_PIN_OUTPUT},
+	{CPM_PORTD, 15, CPM_PIN_OUTPUT},
+};
+
+static void __init init_pins(int n, struct cpm_pin *pin)
+{
+	int i;
+
+	for (i = 0; i < n; i++) {
+		cpm1_set_pin(pin->port, pin->pin, pin->flags);
+		pin++;
+	}
+}
+
+static void __init init_ioports(void)
+{
+	struct device_node *dnode;
+	struct property *prop;
+	int	len;
+
+	init_pins(ARRAY_SIZE(tqm8xx_pins), &tqm8xx_pins[0]);
+
+	cpm1_clk_setup(CPM_CLK_SMC1, CPM_BRG1, CPM_CLK_RTX);
+
+	dnode = of_find_node_by_name(NULL, "aliases");
+	if (dnode == NULL)
+		return;
+	prop = of_find_property(dnode, "ethernet1", &len);
+
+	of_node_put(dnode);
+
+	if (prop == NULL)
+		return;
+
+	/* init FEC pins */
+	init_pins(ARRAY_SIZE(tqm8xx_fec_pins), &tqm8xx_fec_pins[0]);
+}
+
+static void __init tqm8xx_setup_arch(void)
+{
+	cpm_reset();
+	init_ioports();
+}
+
+static int __init tqm8xx_probe(void)
+{
+	return of_machine_is_compatible("tqc,tqm8xx");
+}
+
+static const struct of_device_id of_bus_ids[] __initconst = {
+	{ .name = "soc", },
+	{ .name = "cpm", },
+	{ .name = "localbus", },
+	{ .compatible = "simple-bus" },
+	{},
+};
+
+static int __init declare_of_platform_devices(void)
+{
+	of_platform_bus_probe(NULL, of_bus_ids, NULL);
+
+	return 0;
+}
+machine_device_initcall(tqm8xx, declare_of_platform_devices);
+
+define_machine(tqm8xx) {
+	.name			= "TQM8xx",
+	.probe			= tqm8xx_probe,
+	.setup_arch		= tqm8xx_setup_arch,
+	.init_IRQ		= mpc8xx_pic_init,
+	.get_irq		= mpc8xx_get_irq,
+	.restart		= mpc8xx_restart,
+	.calibrate_decr		= mpc8xx_calibrate_decr,
+	.set_rtc_time		= mpc8xx_set_rtc_time,
+	.get_rtc_time		= mpc8xx_get_rtc_time,
+	.progress		= udbg_progress,
+};