Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1252 insertions, 0 deletions

diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
new file mode 100644
index 000000000..e309e7156
--- /dev/null
+++ b/arch/x86/entry/entry_32.S
@@ -0,0 +1,1252 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright (C) 1991,1992  Linus Torvalds
+ *
+ * entry_32.S contains the system-call and low-level fault and trap handling routines.
+ *
+ * Stack layout while running C code:
+ *	ptrace needs to have all registers on the stack.
+ *	If the order here is changed, it needs to be
+ *	updated in fork.c:copy_process(), signal.c:do_signal(),
+ *	ptrace.c and ptrace.h
+ *
+ *	 0(%esp) - %ebx
+ *	 4(%esp) - %ecx
+ *	 8(%esp) - %edx
+ *	 C(%esp) - %esi
+ *	10(%esp) - %edi
+ *	14(%esp) - %ebp
+ *	18(%esp) - %eax
+ *	1C(%esp) - %ds
+ *	20(%esp) - %es
+ *	24(%esp) - %fs
+ *	28(%esp) - unused -- was %gs on old stackprotector kernels
+ *	2C(%esp) - orig_eax
+ *	30(%esp) - %eip
+ *	34(%esp) - %cs
+ *	38(%esp) - %eflags
+ *	3C(%esp) - %oldesp
+ *	40(%esp) - %oldss
+ */
+
+#include <linux/linkage.h>
+#include <linux/err.h>
+#include <asm/thread_info.h>
+#include <asm/irqflags.h>
+#include <asm/errno.h>
+#include <asm/segment.h>
+#include <asm/smp.h>
+#include <asm/percpu.h>
+#include <asm/processor-flags.h>
+#include <asm/irq_vectors.h>
+#include <asm/cpufeatures.h>
+#include <asm/alternative.h>
+#include <asm/asm.h>
+#include <asm/smap.h>
+#include <asm/frame.h>
+#include <asm/trapnr.h>
+#include <asm/nospec-branch.h>
+
+#include "calling.h"
+
+	.section .entry.text, "ax"
+
+#define PTI_SWITCH_MASK         (1 << PAGE_SHIFT)
+
+/* Unconditionally switch to user cr3 */
+.macro SWITCH_TO_USER_CR3 scratch_reg:req
+	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+
+	movl	%cr3, \scratch_reg
+	orl	$PTI_SWITCH_MASK, \scratch_reg
+	movl	\scratch_reg, %cr3
+.Lend_\@:
+.endm
+
+.macro BUG_IF_WRONG_CR3 no_user_check=0
+#ifdef CONFIG_DEBUG_ENTRY
+	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+	.if \no_user_check == 0
+	/* coming from usermode? */
+	testl	$USER_SEGMENT_RPL_MASK, PT_CS(%esp)
+	jz	.Lend_\@
+	.endif
+	/* On user-cr3? */
+	movl	%cr3, %eax
+	testl	$PTI_SWITCH_MASK, %eax
+	jnz	.Lend_\@
+	/* From userspace with kernel cr3 - BUG */
+	ud2
+.Lend_\@:
+#endif
+.endm
+
+/*
+ * Switch to kernel cr3 if not already loaded and return current cr3 in
+ * \scratch_reg
+ */
+.macro SWITCH_TO_KERNEL_CR3 scratch_reg:req
+	ALTERNATIVE "jmp .Lend_\@", "", X86_FEATURE_PTI
+	movl	%cr3, \scratch_reg
+	/* Test if we are already on kernel CR3 */
+	testl	$PTI_SWITCH_MASK, \scratch_reg
+	jz	.Lend_\@
+	andl	$(~PTI_SWITCH_MASK), \scratch_reg
+	movl	\scratch_reg, %cr3
+	/* Return original CR3 in \scratch_reg */
+	orl	$PTI_SWITCH_MASK, \scratch_reg
+.Lend_\@:
+.endm
+
+#define CS_FROM_ENTRY_STACK	(1 << 31)
+#define CS_FROM_USER_CR3	(1 << 30)
+#define CS_FROM_KERNEL		(1 << 29)
+#define CS_FROM_ESPFIX		(1 << 28)
+
+.macro FIXUP_FRAME
+	/*
+	 * The high bits of the CS dword (__csh) are used for CS_FROM_*.
+	 * Clear them in case hardware didn't do this for us.
+	 */
+	andl	$0x0000ffff, 4*4(%esp)
+
+#ifdef CONFIG_VM86
+	testl	$X86_EFLAGS_VM, 5*4(%esp)
+	jnz	.Lfrom_usermode_no_fixup_\@
+#endif
+	testl	$USER_SEGMENT_RPL_MASK, 4*4(%esp)
+	jnz	.Lfrom_usermode_no_fixup_\@
+
+	orl	$CS_FROM_KERNEL, 4*4(%esp)
+
+	/*
+	 * When we're here from kernel mode; the (exception) stack looks like:
+	 *
+	 *  6*4(%esp) - <previous context>
+	 *  5*4(%esp) - flags
+	 *  4*4(%esp) - cs
+	 *  3*4(%esp) - ip
+	 *  2*4(%esp) - orig_eax
+	 *  1*4(%esp) - gs / function
+	 *  0*4(%esp) - fs
+	 *
+	 * Lets build a 5 entry IRET frame after that, such that struct pt_regs
+	 * is complete and in particular regs->sp is correct. This gives us
+	 * the original 6 entries as gap:
+	 *
+	 * 14*4(%esp) - <previous context>
+	 * 13*4(%esp) - gap / flags
+	 * 12*4(%esp) - gap / cs
+	 * 11*4(%esp) - gap / ip
+	 * 10*4(%esp) - gap / orig_eax
+	 *  9*4(%esp) - gap / gs / function
+	 *  8*4(%esp) - gap / fs
+	 *  7*4(%esp) - ss
+	 *  6*4(%esp) - sp
+	 *  5*4(%esp) - flags
+	 *  4*4(%esp) - cs
+	 *  3*4(%esp) - ip
+	 *  2*4(%esp) - orig_eax
+	 *  1*4(%esp) - gs / function
+	 *  0*4(%esp) - fs
+	 */
+
+	pushl	%ss		# ss
+	pushl	%esp		# sp (points at ss)
+	addl	$7*4, (%esp)	# point sp back at the previous context
+	pushl	7*4(%esp)	# flags
+	pushl	7*4(%esp)	# cs
+	pushl	7*4(%esp)	# ip
+	pushl	7*4(%esp)	# orig_eax
+	pushl	7*4(%esp)	# gs / function
+	pushl	7*4(%esp)	# fs
+.Lfrom_usermode_no_fixup_\@:
+.endm
+
+.macro IRET_FRAME
+	/*
+	 * We're called with %ds, %es, %fs, and %gs from the interrupted
+	 * frame, so we shouldn't use them.  Also, we may be in ESPFIX
+	 * mode and therefore have a nonzero SS base and an offset ESP,
+	 * so any attempt to access the stack needs to use SS.  (except for
+	 * accesses through %esp, which automatically use SS.)
+	 */
+	testl $CS_FROM_KERNEL, 1*4(%esp)
+	jz .Lfinished_frame_\@
+
+	/*
+	 * Reconstruct the 3 entry IRET frame right after the (modified)
+	 * regs->sp without lowering %esp in between, such that an NMI in the
+	 * middle doesn't scribble our stack.
+	 */
+	pushl	%eax
+	pushl	%ecx
+	movl	5*4(%esp), %eax		# (modified) regs->sp
+
+	movl	4*4(%esp), %ecx		# flags
+	movl	%ecx, %ss:-1*4(%eax)
+
+	movl	3*4(%esp), %ecx		# cs
+	andl	$0x0000ffff, %ecx
+	movl	%ecx, %ss:-2*4(%eax)
+
+	movl	2*4(%esp), %ecx		# ip
+	movl	%ecx, %ss:-3*4(%eax)
+
+	movl	1*4(%esp), %ecx		# eax
+	movl	%ecx, %ss:-4*4(%eax)
+
+	popl	%ecx
+	lea	-4*4(%eax), %esp
+	popl	%eax
+.Lfinished_frame_\@:
+.endm
+
+.macro SAVE_ALL pt_regs_ax=%eax switch_stacks=0 skip_gs=0 unwind_espfix=0
+	cld
+.if \skip_gs == 0
+	pushl	$0
+.endif
+	pushl	%fs
+
+	pushl	%eax
+	movl	$(__KERNEL_PERCPU), %eax
+	movl	%eax, %fs
+.if \unwind_espfix > 0
+	UNWIND_ESPFIX_STACK
+.endif
+	popl	%eax
+
+	FIXUP_FRAME
+	pushl	%es
+	pushl	%ds
+	pushl	\pt_regs_ax
+	pushl	%ebp
+	pushl	%edi
+	pushl	%esi
+	pushl	%edx
+	pushl	%ecx
+	pushl	%ebx
+	movl	$(__USER_DS), %edx
+	movl	%edx, %ds
+	movl	%edx, %es
+	/* Switch to kernel stack if necessary */
+.if \switch_stacks > 0
+	SWITCH_TO_KERNEL_STACK
+.endif
+.endm
+
+.macro SAVE_ALL_NMI cr3_reg:req unwind_espfix=0
+	SAVE_ALL unwind_espfix=\unwind_espfix
+
+	BUG_IF_WRONG_CR3
+
+	/*
+	 * Now switch the CR3 when PTI is enabled.
+	 *
+	 * We can enter with either user or kernel cr3, the code will
+	 * store the old cr3 in \cr3_reg and switches to the kernel cr3
+	 * if necessary.
+	 */
+	SWITCH_TO_KERNEL_CR3 scratch_reg=\cr3_reg
+
+.Lend_\@:
+.endm
+
+.macro RESTORE_INT_REGS
+	popl	%ebx
+	popl	%ecx
+	popl	%edx
+	popl	%esi
+	popl	%edi
+	popl	%ebp
+	popl	%eax
+.endm
+
+.macro RESTORE_REGS pop=0
+	RESTORE_INT_REGS
+1:	popl	%ds
+2:	popl	%es
+3:	popl	%fs
+4:	addl	$(4 + \pop), %esp	/* pop the unused "gs" slot */
+	IRET_FRAME
+
+	/*
+	 * There is no _ASM_EXTABLE_TYPE_REG() for ASM, however since this is
+	 * ASM the registers are known and we can trivially hard-code them.
+	 */
+	_ASM_EXTABLE_TYPE(1b, 2b, EX_TYPE_POP_ZERO|EX_REG_DS)
+	_ASM_EXTABLE_TYPE(2b, 3b, EX_TYPE_POP_ZERO|EX_REG_ES)
+	_ASM_EXTABLE_TYPE(3b, 4b, EX_TYPE_POP_ZERO|EX_REG_FS)
+.endm
+
+.macro RESTORE_ALL_NMI cr3_reg:req pop=0
+	/*
+	 * Now switch the CR3 when PTI is enabled.
+	 *
+	 * We enter with kernel cr3 and switch the cr3 to the value
+	 * stored on \cr3_reg, which is either a user or a kernel cr3.
+	 */
+	ALTERNATIVE "jmp .Lswitched_\@", "", X86_FEATURE_PTI
+
+	testl	$PTI_SWITCH_MASK, \cr3_reg
+	jz	.Lswitched_\@
+
+	/* User cr3 in \cr3_reg - write it to hardware cr3 */
+	movl	\cr3_reg, %cr3
+
+.Lswitched_\@:
+
+	BUG_IF_WRONG_CR3
+
+	RESTORE_REGS pop=\pop
+.endm
+
+.macro CHECK_AND_APPLY_ESPFIX
+#ifdef CONFIG_X86_ESPFIX32
+#define GDT_ESPFIX_OFFSET (GDT_ENTRY_ESPFIX_SS * 8)
+#define GDT_ESPFIX_SS PER_CPU_VAR(gdt_page) + GDT_ESPFIX_OFFSET
+
+	ALTERNATIVE	"jmp .Lend_\@", "", X86_BUG_ESPFIX
+
+	movl	PT_EFLAGS(%esp), %eax		# mix EFLAGS, SS and CS
+	/*
+	 * Warning: PT_OLDSS(%esp) contains the wrong/random values if we
+	 * are returning to the kernel.
+	 * See comments in process.c:copy_thread() for details.
+	 */
+	movb	PT_OLDSS(%esp), %ah
+	movb	PT_CS(%esp), %al
+	andl	$(X86_EFLAGS_VM | (SEGMENT_TI_MASK << 8) | SEGMENT_RPL_MASK), %eax
+	cmpl	$((SEGMENT_LDT << 8) | USER_RPL), %eax
+	jne	.Lend_\@	# returning to user-space with LDT SS
+
+	/*
+	 * Setup and switch to ESPFIX stack
+	 *
+	 * We're returning to userspace with a 16 bit stack. The CPU will not
+	 * restore the high word of ESP for us on executing iret... This is an
+	 * "official" bug of all the x86-compatible CPUs, which we can work
+	 * around to make dosemu and wine happy. We do this by preloading the
+	 * high word of ESP with the high word of the userspace ESP while
+	 * compensating for the offset by changing to the ESPFIX segment with
+	 * a base address that matches for the difference.
+	 */
+	mov	%esp, %edx			/* load kernel esp */
+	mov	PT_OLDESP(%esp), %eax		/* load userspace esp */
+	mov	%dx, %ax			/* eax: new kernel esp */
+	sub	%eax, %edx			/* offset (low word is 0) */
+	shr	$16, %edx
+	mov	%dl, GDT_ESPFIX_SS + 4		/* bits 16..23 */
+	mov	%dh, GDT_ESPFIX_SS + 7		/* bits 24..31 */
+	pushl	$__ESPFIX_SS
+	pushl	%eax				/* new kernel esp */
+	/*
+	 * Disable interrupts, but do not irqtrace this section: we
+	 * will soon execute iret and the tracer was already set to
+	 * the irqstate after the IRET:
+	 */
+	cli
+	lss	(%esp), %esp			/* switch to espfix segment */
+.Lend_\@:
+#endif /* CONFIG_X86_ESPFIX32 */
+.endm
+
+/*
+ * Called with pt_regs fully populated and kernel segments loaded,
+ * so we can access PER_CPU and use the integer registers.
+ *
+ * We need to be very careful here with the %esp switch, because an NMI
+ * can happen everywhere. If the NMI handler finds itself on the
+ * entry-stack, it will overwrite the task-stack and everything we
+ * copied there. So allocate the stack-frame on the task-stack and
+ * switch to it before we do any copying.
+ */
+
+.macro SWITCH_TO_KERNEL_STACK
+
+	BUG_IF_WRONG_CR3
+
+	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
+
+	/*
+	 * %eax now contains the entry cr3 and we carry it forward in
+	 * that register for the time this macro runs
+	 */
+
+	/* Are we on the entry stack? Bail out if not! */
+	movl	PER_CPU_VAR(cpu_entry_area), %ecx
+	addl	$CPU_ENTRY_AREA_entry_stack + SIZEOF_entry_stack, %ecx
+	subl	%esp, %ecx	/* ecx = (end of entry_stack) - esp */
+	cmpl	$SIZEOF_entry_stack, %ecx
+	jae	.Lend_\@
+
+	/* Load stack pointer into %esi and %edi */
+	movl	%esp, %esi
+	movl	%esi, %edi
+
+	/* Move %edi to the top of the entry stack */
+	andl	$(MASK_entry_stack), %edi
+	addl	$(SIZEOF_entry_stack), %edi
+
+	/* Load top of task-stack into %edi */
+	movl	TSS_entry2task_stack(%edi), %edi
+
+	/* Special case - entry from kernel mode via entry stack */
+#ifdef CONFIG_VM86
+	movl	PT_EFLAGS(%esp), %ecx		# mix EFLAGS and CS
+	movb	PT_CS(%esp), %cl
+	andl	$(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %ecx
+#else
+	movl	PT_CS(%esp), %ecx
+	andl	$SEGMENT_RPL_MASK, %ecx
+#endif
+	cmpl	$USER_RPL, %ecx
+	jb	.Lentry_from_kernel_\@
+
+	/* Bytes to copy */
+	movl	$PTREGS_SIZE, %ecx
+
+#ifdef CONFIG_VM86
+	testl	$X86_EFLAGS_VM, PT_EFLAGS(%esi)
+	jz	.Lcopy_pt_regs_\@
+
+	/*
+	 * Stack-frame contains 4 additional segment registers when
+	 * coming from VM86 mode
+	 */
+	addl	$(4 * 4), %ecx
+
+#endif
+.Lcopy_pt_regs_\@:
+
+	/* Allocate frame on task-stack */
+	subl	%ecx, %edi
+
+	/* Switch to task-stack */
+	movl	%edi, %esp
+
+	/*
+	 * We are now on the task-stack and can safely copy over the
+	 * stack-frame
+	 */
+	shrl	$2, %ecx
+	cld
+	rep movsl
+
+	jmp .Lend_\@
+
+.Lentry_from_kernel_\@:
+
+	/*
+	 * This handles the case when we enter the kernel from
+	 * kernel-mode and %esp points to the entry-stack. When this
+	 * happens we need to switch to the task-stack to run C code,
+	 * but switch back to the entry-stack again when we approach
+	 * iret and return to the interrupted code-path. This usually
+	 * happens when we hit an exception while restoring user-space
+	 * segment registers on the way back to user-space or when the
+	 * sysenter handler runs with eflags.tf set.
+	 *
+	 * When we switch to the task-stack here, we can't trust the
+	 * contents of the entry-stack anymore, as the exception handler
+	 * might be scheduled out or moved to another CPU. Therefore we
+	 * copy the complete entry-stack to the task-stack and set a
+	 * marker in the iret-frame (bit 31 of the CS dword) to detect
+	 * what we've done on the iret path.
+	 *
+	 * On the iret path we copy everything back and switch to the
+	 * entry-stack, so that the interrupted kernel code-path
+	 * continues on the same stack it was interrupted with.
+	 *
+	 * Be aware that an NMI can happen anytime in this code.
+	 *
+	 * %esi: Entry-Stack pointer (same as %esp)
+	 * %edi: Top of the task stack
+	 * %eax: CR3 on kernel entry
+	 */
+
+	/* Calculate number of bytes on the entry stack in %ecx */
+	movl	%esi, %ecx
+
+	/* %ecx to the top of entry-stack */
+	andl	$(MASK_entry_stack), %ecx
+	addl	$(SIZEOF_entry_stack), %ecx
+
+	/* Number of bytes on the entry stack to %ecx */
+	sub	%esi, %ecx
+
+	/* Mark stackframe as coming from entry stack */
+	orl	$CS_FROM_ENTRY_STACK, PT_CS(%esp)
+
+	/*
+	 * Test the cr3 used to enter the kernel and add a marker
+	 * so that we can switch back to it before iret.
+	 */
+	testl	$PTI_SWITCH_MASK, %eax
+	jz	.Lcopy_pt_regs_\@
+	orl	$CS_FROM_USER_CR3, PT_CS(%esp)
+
+	/*
+	 * %esi and %edi are unchanged, %ecx contains the number of
+	 * bytes to copy. The code at .Lcopy_pt_regs_\@ will allocate
+	 * the stack-frame on task-stack and copy everything over
+	 */
+	jmp .Lcopy_pt_regs_\@
+
+.Lend_\@:
+.endm
+
+/*
+ * Switch back from the kernel stack to the entry stack.
+ *
+ * The %esp register must point to pt_regs on the task stack. It will
+ * first calculate the size of the stack-frame to copy, depending on
+ * whether we return to VM86 mode or not. With that it uses 'rep movsl'
+ * to copy the contents of the stack over to the entry stack.
+ *
+ * We must be very careful here, as we can't trust the contents of the
+ * task-stack once we switched to the entry-stack. When an NMI happens
+ * while on the entry-stack, the NMI handler will switch back to the top
+ * of the task stack, overwriting our stack-frame we are about to copy.
+ * Therefore we switch the stack only after everything is copied over.
+ */
+.macro SWITCH_TO_ENTRY_STACK
+
+	/* Bytes to copy */
+	movl	$PTREGS_SIZE, %ecx
+
+#ifdef CONFIG_VM86
+	testl	$(X86_EFLAGS_VM), PT_EFLAGS(%esp)
+	jz	.Lcopy_pt_regs_\@
+
+	/* Additional 4 registers to copy when returning to VM86 mode */
+	addl    $(4 * 4), %ecx
+
+.Lcopy_pt_regs_\@:
+#endif
+
+	/* Initialize source and destination for movsl */
+	movl	PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %edi
+	subl	%ecx, %edi
+	movl	%esp, %esi
+
+	/* Save future stack pointer in %ebx */
+	movl	%edi, %ebx
+
+	/* Copy over the stack-frame */
+	shrl	$2, %ecx
+	cld
+	rep movsl
+
+	/*
+	 * Switch to entry-stack - needs to happen after everything is
+	 * copied because the NMI handler will overwrite the task-stack
+	 * when on entry-stack
+	 */
+	movl	%ebx, %esp
+
+.Lend_\@:
+.endm
+
+/*
+ * This macro handles the case when we return to kernel-mode on the iret
+ * path and have to switch back to the entry stack and/or user-cr3
+ *
+ * See the comments below the .Lentry_from_kernel_\@ label in the
+ * SWITCH_TO_KERNEL_STACK macro for more details.
+ */
+.macro PARANOID_EXIT_TO_KERNEL_MODE
+
+	/*
+	 * Test if we entered the kernel with the entry-stack. Most
+	 * likely we did not, because this code only runs on the
+	 * return-to-kernel path.
+	 */
+	testl	$CS_FROM_ENTRY_STACK, PT_CS(%esp)
+	jz	.Lend_\@
+
+	/* Unlikely slow-path */
+
+	/* Clear marker from stack-frame */
+	andl	$(~CS_FROM_ENTRY_STACK), PT_CS(%esp)
+
+	/* Copy the remaining task-stack contents to entry-stack */
+	movl	%esp, %esi
+	movl	PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %edi
+
+	/* Bytes on the task-stack to ecx */
+	movl	PER_CPU_VAR(cpu_tss_rw + TSS_sp1), %ecx
+	subl	%esi, %ecx
+
+	/* Allocate stack-frame on entry-stack */
+	subl	%ecx, %edi
+
+	/*
+	 * Save future stack-pointer, we must not switch until the
+	 * copy is done, otherwise the NMI handler could destroy the
+	 * contents of the task-stack we are about to copy.
+	 */
+	movl	%edi, %ebx
+
+	/* Do the copy */
+	shrl	$2, %ecx
+	cld
+	rep movsl
+
+	/* Safe to switch to entry-stack now */
+	movl	%ebx, %esp
+
+	/*
+	 * We came from entry-stack and need to check if we also need to
+	 * switch back to user cr3.
+	 */
+	testl	$CS_FROM_USER_CR3, PT_CS(%esp)
+	jz	.Lend_\@
+
+	/* Clear marker from stack-frame */
+	andl	$(~CS_FROM_USER_CR3), PT_CS(%esp)
+
+	SWITCH_TO_USER_CR3 scratch_reg=%eax
+
+.Lend_\@:
+.endm
+
+/**
+ * idtentry - Macro to generate entry stubs for simple IDT entries
+ * @vector:		Vector number
+ * @asmsym:		ASM symbol for the entry point
+ * @cfunc:		C function to be called
+ * @has_error_code:	Hardware pushed error code on stack
+ */
+.macro idtentry vector asmsym cfunc has_error_code:req
+SYM_CODE_START(\asmsym)
+	ASM_CLAC
+	cld
+
+	.if \has_error_code == 0
+		pushl	$0		/* Clear the error code */
+	.endif
+
+	/* Push the C-function address into the GS slot */
+	pushl	$\cfunc
+	/* Invoke the common exception entry */
+	jmp	handle_exception
+SYM_CODE_END(\asmsym)
+.endm
+
+.macro idtentry_irq vector cfunc
+	.p2align CONFIG_X86_L1_CACHE_SHIFT
+SYM_CODE_START_LOCAL(asm_\cfunc)
+	ASM_CLAC
+	SAVE_ALL switch_stacks=1
+	ENCODE_FRAME_POINTER
+	movl	%esp, %eax
+	movl	PT_ORIG_EAX(%esp), %edx		/* get the vector from stack */
+	movl	$-1, PT_ORIG_EAX(%esp)		/* no syscall to restart */
+	call	\cfunc
+	jmp	handle_exception_return
+SYM_CODE_END(asm_\cfunc)
+.endm
+
+.macro idtentry_sysvec vector cfunc
+	idtentry \vector asm_\cfunc \cfunc has_error_code=0
+.endm
+
+/*
+ * Include the defines which emit the idt entries which are shared
+ * shared between 32 and 64 bit and emit the __irqentry_text_* markers
+ * so the stacktrace boundary checks work.
+ */
+	.align 16
+	.globl __irqentry_text_start
+__irqentry_text_start:
+
+#include <asm/idtentry.h>
+
+	.align 16
+	.globl __irqentry_text_end
+__irqentry_text_end:
+
+/*
+ * %eax: prev task
+ * %edx: next task
+ */
+.pushsection .text, "ax"
+SYM_CODE_START(__switch_to_asm)
+	/*
+	 * Save callee-saved registers
+	 * This must match the order in struct inactive_task_frame
+	 */
+	pushl	%ebp
+	pushl	%ebx
+	pushl	%edi
+	pushl	%esi
+	/*
+	 * Flags are saved to prevent AC leakage. This could go
+	 * away if objtool would have 32bit support to verify
+	 * the STAC/CLAC correctness.
+	 */
+	pushfl
+
+	/* switch stack */
+	movl	%esp, TASK_threadsp(%eax)
+	movl	TASK_threadsp(%edx), %esp
+
+#ifdef CONFIG_STACKPROTECTOR
+	movl	TASK_stack_canary(%edx), %ebx
+	movl	%ebx, PER_CPU_VAR(__stack_chk_guard)
+#endif
+
+	/*
+	 * When switching from a shallower to a deeper call stack
+	 * the RSB may either underflow or use entries populated
+	 * with userspace addresses. On CPUs where those concerns
+	 * exist, overwrite the RSB with entries which capture
+	 * speculative execution to prevent attack.
+	 */
+	FILL_RETURN_BUFFER %ebx, RSB_CLEAR_LOOPS, X86_FEATURE_RSB_CTXSW
+
+	/* Restore flags or the incoming task to restore AC state. */
+	popfl
+	/* restore callee-saved registers */
+	popl	%esi
+	popl	%edi
+	popl	%ebx
+	popl	%ebp
+
+	jmp	__switch_to
+SYM_CODE_END(__switch_to_asm)
+.popsection
+
+/*
+ * The unwinder expects the last frame on the stack to always be at the same
+ * offset from the end of the page, which allows it to validate the stack.
+ * Calling schedule_tail() directly would break that convention because its an
+ * asmlinkage function so its argument has to be pushed on the stack.  This
+ * wrapper creates a proper "end of stack" frame header before the call.
+ */
+.pushsection .text, "ax"
+SYM_FUNC_START(schedule_tail_wrapper)
+	FRAME_BEGIN
+
+	pushl	%eax
+	call	schedule_tail
+	popl	%eax
+
+	FRAME_END
+	RET
+SYM_FUNC_END(schedule_tail_wrapper)
+.popsection
+
+/*
+ * A newly forked process directly context switches into this address.
+ *
+ * eax: prev task we switched from
+ * ebx: kernel thread func (NULL for user thread)
+ * edi: kernel thread arg
+ */
+.pushsection .text, "ax"
+SYM_CODE_START(ret_from_fork)
+	call	schedule_tail_wrapper
+
+	testl	%ebx, %ebx
+	jnz	1f		/* kernel threads are uncommon */
+
+2:
+	/* When we fork, we trace the syscall return in the child, too. */
+	movl    %esp, %eax
+	call    syscall_exit_to_user_mode
+	jmp     .Lsyscall_32_done
+
+	/* kernel thread */
+1:	movl	%edi, %eax
+	CALL_NOSPEC ebx
+	/*
+	 * A kernel thread is allowed to return here after successfully
+	 * calling kernel_execve().  Exit to userspace to complete the execve()
+	 * syscall.
+	 */
+	movl	$0, PT_EAX(%esp)
+	jmp	2b
+SYM_CODE_END(ret_from_fork)
+.popsection
+
+SYM_ENTRY(__begin_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
+/*
+ * All code from here through __end_SYSENTER_singlestep_region is subject
+ * to being single-stepped if a user program sets TF and executes SYSENTER.
+ * There is absolutely nothing that we can do to prevent this from happening
+ * (thanks Intel!).  To keep our handling of this situation as simple as
+ * possible, we handle TF just like AC and NT, except that our #DB handler
+ * will ignore all of the single-step traps generated in this range.
+ */
+
+/*
+ * 32-bit SYSENTER entry.
+ *
+ * 32-bit system calls through the vDSO's __kernel_vsyscall enter here
+ * if X86_FEATURE_SEP is available.  This is the preferred system call
+ * entry on 32-bit systems.
+ *
+ * The SYSENTER instruction, in principle, should *only* occur in the
+ * vDSO.  In practice, a small number of Android devices were shipped
+ * with a copy of Bionic that inlined a SYSENTER instruction.  This
+ * never happened in any of Google's Bionic versions -- it only happened
+ * in a narrow range of Intel-provided versions.
+ *
+ * SYSENTER loads SS, ESP, CS, and EIP from previously programmed MSRs.
+ * IF and VM in RFLAGS are cleared (IOW: interrupts are off).
+ * SYSENTER does not save anything on the stack,
+ * and does not save old EIP (!!!), ESP, or EFLAGS.
+ *
+ * To avoid losing track of EFLAGS.VM (and thus potentially corrupting
+ * user and/or vm86 state), we explicitly disable the SYSENTER
+ * instruction in vm86 mode by reprogramming the MSRs.
+ *
+ * Arguments:
+ * eax  system call number
+ * ebx  arg1
+ * ecx  arg2
+ * edx  arg3
+ * esi  arg4
+ * edi  arg5
+ * ebp  user stack
+ * 0(%ebp) arg6
+ */
+SYM_FUNC_START(entry_SYSENTER_32)
+	/*
+	 * On entry-stack with all userspace-regs live - save and
+	 * restore eflags and %eax to use it as scratch-reg for the cr3
+	 * switch.
+	 */
+	pushfl
+	pushl	%eax
+	BUG_IF_WRONG_CR3 no_user_check=1
+	SWITCH_TO_KERNEL_CR3 scratch_reg=%eax
+	popl	%eax
+	popfl
+
+	/* Stack empty again, switch to task stack */
+	movl	TSS_entry2task_stack(%esp), %esp
+
+.Lsysenter_past_esp:
+	pushl	$__USER_DS		/* pt_regs->ss */
+	pushl	$0			/* pt_regs->sp (placeholder) */
+	pushfl				/* pt_regs->flags (except IF = 0) */
+	pushl	$__USER_CS		/* pt_regs->cs */
+	pushl	$0			/* pt_regs->ip = 0 (placeholder) */
+	pushl	%eax			/* pt_regs->orig_ax */
+	SAVE_ALL pt_regs_ax=$-ENOSYS	/* save rest, stack already switched */
+
+	/*
+	 * SYSENTER doesn't filter flags, so we need to clear NT, AC
+	 * and TF ourselves.  To save a few cycles, we can check whether
+	 * either was set instead of doing an unconditional popfq.
+	 * This needs to happen before enabling interrupts so that
+	 * we don't get preempted with NT set.
+	 *
+	 * If TF is set, we will single-step all the way to here -- do_debug
+	 * will ignore all the traps.  (Yes, this is slow, but so is
+	 * single-stepping in general.  This allows us to avoid having
+	 * a more complicated code to handle the case where a user program
+	 * forces us to single-step through the SYSENTER entry code.)
+	 *
+	 * NB.: .Lsysenter_fix_flags is a label with the code under it moved
+	 * out-of-line as an optimization: NT is unlikely to be set in the
+	 * majority of the cases and instead of polluting the I$ unnecessarily,
+	 * we're keeping that code behind a branch which will predict as
+	 * not-taken and therefore its instructions won't be fetched.
+	 */
+	testl	$X86_EFLAGS_NT|X86_EFLAGS_AC|X86_EFLAGS_TF, PT_EFLAGS(%esp)
+	jnz	.Lsysenter_fix_flags
+.Lsysenter_flags_fixed:
+
+	movl	%esp, %eax
+	call	do_SYSENTER_32
+	testl	%eax, %eax
+	jz	.Lsyscall_32_done
+
+	STACKLEAK_ERASE
+
+	/* Opportunistic SYSEXIT */
+
+	/*
+	 * Setup entry stack - we keep the pointer in %eax and do the
+	 * switch after almost all user-state is restored.
+	 */
+
+	/* Load entry stack pointer and allocate frame for eflags/eax */
+	movl	PER_CPU_VAR(cpu_tss_rw + TSS_sp0), %eax
+	subl	$(2*4), %eax
+
+	/* Copy eflags and eax to entry stack */
+	movl	PT_EFLAGS(%esp), %edi
+	movl	PT_EAX(%esp), %esi
+	movl	%edi, (%eax)
+	movl	%esi, 4(%eax)
+
+	/* Restore user registers and segments */
+	movl	PT_EIP(%esp), %edx	/* pt_regs->ip */
+	movl	PT_OLDESP(%esp), %ecx	/* pt_regs->sp */
+1:	mov	PT_FS(%esp), %fs
+
+	popl	%ebx			/* pt_regs->bx */
+	addl	$2*4, %esp		/* skip pt_regs->cx and pt_regs->dx */
+	popl	%esi			/* pt_regs->si */
+	popl	%edi			/* pt_regs->di */
+	popl	%ebp			/* pt_regs->bp */
+
+	/* Switch to entry stack */
+	movl	%eax, %esp
+
+	/* Now ready to switch the cr3 */
+	SWITCH_TO_USER_CR3 scratch_reg=%eax
+
+	/*
+	 * Restore all flags except IF. (We restore IF separately because
+	 * STI gives a one-instruction window in which we won't be interrupted,
+	 * whereas POPF does not.)
+	 */
+	btrl	$X86_EFLAGS_IF_BIT, (%esp)
+	BUG_IF_WRONG_CR3 no_user_check=1
+	popfl
+	popl	%eax
+
+	/*
+	 * Return back to the vDSO, which will pop ecx and edx.
+	 * Don't bother with DS and ES (they already contain __USER_DS).
+	 */
+	sti
+	sysexit
+
+2:	movl    $0, PT_FS(%esp)
+	jmp     1b
+	_ASM_EXTABLE(1b, 2b)
+
+.Lsysenter_fix_flags:
+	pushl	$X86_EFLAGS_FIXED
+	popfl
+	jmp	.Lsysenter_flags_fixed
+SYM_ENTRY(__end_SYSENTER_singlestep_region, SYM_L_GLOBAL, SYM_A_NONE)
+SYM_FUNC_END(entry_SYSENTER_32)
+
+/*
+ * 32-bit legacy system call entry.
+ *
+ * 32-bit x86 Linux system calls traditionally used the INT $0x80
+ * instruction.  INT $0x80 lands here.
+ *
+ * This entry point can be used by any 32-bit perform system calls.
+ * Instances of INT $0x80 can be found inline in various programs and
+ * libraries.  It is also used by the vDSO's __kernel_vsyscall
+ * fallback for hardware that doesn't support a faster entry method.
+ * Restarted 32-bit system calls also fall back to INT $0x80
+ * regardless of what instruction was originally used to do the system
+ * call.  (64-bit programs can use INT $0x80 as well, but they can
+ * only run on 64-bit kernels and therefore land in
+ * entry_INT80_compat.)
+ *
+ * This is considered a slow path.  It is not used by most libc
+ * implementations on modern hardware except during process startup.
+ *
+ * Arguments:
+ * eax  system call number
+ * ebx  arg1
+ * ecx  arg2
+ * edx  arg3
+ * esi  arg4
+ * edi  arg5
+ * ebp  arg6
+ */
+SYM_FUNC_START(entry_INT80_32)
+	ASM_CLAC
+	pushl	%eax			/* pt_regs->orig_ax */
+
+	SAVE_ALL pt_regs_ax=$-ENOSYS switch_stacks=1	/* save rest */
+
+	movl	%esp, %eax
+	call	do_int80_syscall_32
+.Lsyscall_32_done:
+	STACKLEAK_ERASE
+
+restore_all_switch_stack:
+	SWITCH_TO_ENTRY_STACK
+	CHECK_AND_APPLY_ESPFIX
+
+	/* Switch back to user CR3 */
+	SWITCH_TO_USER_CR3 scratch_reg=%eax
+
+	BUG_IF_WRONG_CR3
+
+	/* Restore user state */
+	RESTORE_REGS pop=4			# skip orig_eax/error_code
+.Lirq_return:
+	/*
+	 * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on IRET core serialization
+	 * when returning from IPI handler and when returning from
+	 * scheduler to user-space.
+	 */
+	iret
+
+.Lasm_iret_error:
+	pushl	$0				# no error code
+	pushl	$iret_error
+
+#ifdef CONFIG_DEBUG_ENTRY
+	/*
+	 * The stack-frame here is the one that iret faulted on, so its a
+	 * return-to-user frame. We are on kernel-cr3 because we come here from
+	 * the fixup code. This confuses the CR3 checker, so switch to user-cr3
+	 * as the checker expects it.
+	 */
+	pushl	%eax
+	SWITCH_TO_USER_CR3 scratch_reg=%eax
+	popl	%eax
+#endif
+
+	jmp	handle_exception
+
+	_ASM_EXTABLE(.Lirq_return, .Lasm_iret_error)
+SYM_FUNC_END(entry_INT80_32)
+
+.macro FIXUP_ESPFIX_STACK
+/*
+ * Switch back for ESPFIX stack to the normal zerobased stack
+ *
+ * We can't call C functions using the ESPFIX stack. This code reads
+ * the high word of the segment base from the GDT and swiches to the
+ * normal stack and adjusts ESP with the matching offset.
+ *
+ * We might be on user CR3 here, so percpu data is not mapped and we can't
+ * access the GDT through the percpu segment.  Instead, use SGDT to find
+ * the cpu_entry_area alias of the GDT.
+ */
+#ifdef CONFIG_X86_ESPFIX32
+	/* fixup the stack */
+	pushl	%ecx
+	subl	$2*4, %esp
+	sgdt	(%esp)
+	movl	2(%esp), %ecx				/* GDT address */
+	/*
+	 * Careful: ECX is a linear pointer, so we need to force base
+	 * zero.  %cs is the only known-linear segment we have right now.
+	 */
+	mov	%cs:GDT_ESPFIX_OFFSET + 4(%ecx), %al	/* bits 16..23 */
+	mov	%cs:GDT_ESPFIX_OFFSET + 7(%ecx), %ah	/* bits 24..31 */
+	shl	$16, %eax
+	addl	$2*4, %esp
+	popl	%ecx
+	addl	%esp, %eax			/* the adjusted stack pointer */
+	pushl	$__KERNEL_DS
+	pushl	%eax
+	lss	(%esp), %esp			/* switch to the normal stack segment */
+#endif
+.endm
+
+.macro UNWIND_ESPFIX_STACK
+	/* It's safe to clobber %eax, all other regs need to be preserved */
+#ifdef CONFIG_X86_ESPFIX32
+	movl	%ss, %eax
+	/* see if on espfix stack */
+	cmpw	$__ESPFIX_SS, %ax
+	jne	.Lno_fixup_\@
+	/* switch to normal stack */
+	FIXUP_ESPFIX_STACK
+.Lno_fixup_\@:
+#endif
+.endm
+
+SYM_CODE_START_LOCAL_NOALIGN(handle_exception)
+	/* the function address is in %gs's slot on the stack */
+	SAVE_ALL switch_stacks=1 skip_gs=1 unwind_espfix=1
+	ENCODE_FRAME_POINTER
+
+	movl	PT_GS(%esp), %edi		# get the function address
+
+	/* fixup orig %eax */
+	movl	PT_ORIG_EAX(%esp), %edx		# get the error code
+	movl	$-1, PT_ORIG_EAX(%esp)		# no syscall to restart
+
+	movl	%esp, %eax			# pt_regs pointer
+	CALL_NOSPEC edi
+
+handle_exception_return:
+#ifdef CONFIG_VM86
+	movl	PT_EFLAGS(%esp), %eax		# mix EFLAGS and CS
+	movb	PT_CS(%esp), %al
+	andl	$(X86_EFLAGS_VM | SEGMENT_RPL_MASK), %eax
+#else
+	/*
+	 * We can be coming here from child spawned by kernel_thread().
+	 */
+	movl	PT_CS(%esp), %eax
+	andl	$SEGMENT_RPL_MASK, %eax
+#endif
+	cmpl	$USER_RPL, %eax			# returning to v8086 or userspace ?
+	jnb	ret_to_user
+
+	PARANOID_EXIT_TO_KERNEL_MODE
+	BUG_IF_WRONG_CR3
+	RESTORE_REGS 4
+	jmp	.Lirq_return
+
+ret_to_user:
+	movl	%esp, %eax
+	jmp	restore_all_switch_stack
+SYM_CODE_END(handle_exception)
+
+SYM_CODE_START(asm_exc_double_fault)
+1:
+	/*
+	 * This is a task gate handler, not an interrupt gate handler.
+	 * The error code is on the stack, but the stack is otherwise
+	 * empty.  Interrupts are off.  Our state is sane with the following
+	 * exceptions:
+	 *
+	 *  - CR0.TS is set.  "TS" literally means "task switched".
+	 *  - EFLAGS.NT is set because we're a "nested task".
+	 *  - The doublefault TSS has back_link set and has been marked busy.
+	 *  - TR points to the doublefault TSS and the normal TSS is busy.
+	 *  - CR3 is the normal kernel PGD.  This would be delightful, except
+	 *    that the CPU didn't bother to save the old CR3 anywhere.  This
+	 *    would make it very awkward to return back to the context we came
+	 *    from.
+	 *
+	 * The rest of EFLAGS is sanitized for us, so we don't need to
+	 * worry about AC or DF.
+	 *
+	 * Don't even bother popping the error code.  It's always zero,
+	 * and ignoring it makes us a bit more robust against buggy
+	 * hypervisor task gate implementations.
+	 *
+	 * We will manually undo the task switch instead of doing a
+	 * task-switching IRET.
+	 */
+
+	clts				/* clear CR0.TS */
+	pushl	$X86_EFLAGS_FIXED
+	popfl				/* clear EFLAGS.NT */
+
+	call	doublefault_shim
+
+	/* We don't support returning, so we have no IRET here. */
+1:
+	hlt
+	jmp 1b
+SYM_CODE_END(asm_exc_double_fault)
+
+/*
+ * NMI is doubly nasty.  It can happen on the first instruction of
+ * entry_SYSENTER_32 (just like #DB), but it can also interrupt the beginning
+ * of the #DB handler even if that #DB in turn hit before entry_SYSENTER_32
+ * switched stacks.  We handle both conditions by simply checking whether we
+ * interrupted kernel code running on the SYSENTER stack.
+ */
+SYM_CODE_START(asm_exc_nmi)
+	ASM_CLAC
+
+#ifdef CONFIG_X86_ESPFIX32
+	/*
+	 * ESPFIX_SS is only ever set on the return to user path
+	 * after we've switched to the entry stack.
+	 */
+	pushl	%eax
+	movl	%ss, %eax
+	cmpw	$__ESPFIX_SS, %ax
+	popl	%eax
+	je	.Lnmi_espfix_stack
+#endif
+
+	pushl	%eax				# pt_regs->orig_ax
+	SAVE_ALL_NMI cr3_reg=%edi
+	ENCODE_FRAME_POINTER
+	xorl	%edx, %edx			# zero error code
+	movl	%esp, %eax			# pt_regs pointer
+
+	/* Are we currently on the SYSENTER stack? */
+	movl	PER_CPU_VAR(cpu_entry_area), %ecx
+	addl	$CPU_ENTRY_AREA_entry_stack + SIZEOF_entry_stack, %ecx
+	subl	%eax, %ecx	/* ecx = (end of entry_stack) - esp */
+	cmpl	$SIZEOF_entry_stack, %ecx
+	jb	.Lnmi_from_sysenter_stack
+
+	/* Not on SYSENTER stack. */
+	call	exc_nmi
+	jmp	.Lnmi_return
+
+.Lnmi_from_sysenter_stack:
+	/*
+	 * We're on the SYSENTER stack.  Switch off.  No one (not even debug)
+	 * is using the thread stack right now, so it's safe for us to use it.
+	 */
+	movl	%esp, %ebx
+	movl	PER_CPU_VAR(cpu_current_top_of_stack), %esp
+	call	exc_nmi
+	movl	%ebx, %esp
+
+.Lnmi_return:
+#ifdef CONFIG_X86_ESPFIX32
+	testl	$CS_FROM_ESPFIX, PT_CS(%esp)
+	jnz	.Lnmi_from_espfix
+#endif
+
+	CHECK_AND_APPLY_ESPFIX
+	RESTORE_ALL_NMI cr3_reg=%edi pop=4
+	jmp	.Lirq_return
+
+#ifdef CONFIG_X86_ESPFIX32
+.Lnmi_espfix_stack:
+	/*
+	 * Create the pointer to LSS back
+	 */
+	pushl	%ss
+	pushl	%esp
+	addl	$4, (%esp)
+
+	/* Copy the (short) IRET frame */
+	pushl	4*4(%esp)	# flags
+	pushl	4*4(%esp)	# cs
+	pushl	4*4(%esp)	# ip
+
+	pushl	%eax		# orig_ax
+
+	SAVE_ALL_NMI cr3_reg=%edi unwind_espfix=1
+	ENCODE_FRAME_POINTER
+
+	/* clear CS_FROM_KERNEL, set CS_FROM_ESPFIX */
+	xorl	$(CS_FROM_ESPFIX | CS_FROM_KERNEL), PT_CS(%esp)
+
+	xorl	%edx, %edx			# zero error code
+	movl	%esp, %eax			# pt_regs pointer
+	jmp	.Lnmi_from_sysenter_stack
+
+.Lnmi_from_espfix:
+	RESTORE_ALL_NMI cr3_reg=%edi
+	/*
+	 * Because we cleared CS_FROM_KERNEL, IRET_FRAME 'forgot' to
+	 * fix up the gap and long frame:
+	 *
+	 *  3 - original frame	(exception)
+	 *  2 - ESPFIX block	(above)
+	 *  6 - gap		(FIXUP_FRAME)
+	 *  5 - long frame	(FIXUP_FRAME)
+	 *  1 - orig_ax
+	 */
+	lss	(1+5+6)*4(%esp), %esp			# back to espfix stack
+	jmp	.Lirq_return
+#endif
+SYM_CODE_END(asm_exc_nmi)
+
+.pushsection .text, "ax"
+SYM_CODE_START(rewind_stack_and_make_dead)
+	/* Prevent any naive code from trying to unwind to our caller. */
+	xorl	%ebp, %ebp
+
+	movl	PER_CPU_VAR(cpu_current_top_of_stack), %esi
+	leal	-TOP_OF_KERNEL_STACK_PADDING-PTREGS_SIZE(%esi), %esp
+
+	call	make_task_dead
+1:	jmp 1b
+SYM_CODE_END(rewind_stack_and_make_dead)
+.popsection