summaryrefslogtreecommitdiffstats
path: root/drivers/bluetooth/btintel.c
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-07 18:49:45 +0000
commit2c3c1048746a4622d8c89a29670120dc8fab93c4 (patch)
tree848558de17fb3008cdf4d861b01ac7781903ce39 /drivers/bluetooth/btintel.c
parentInitial commit. (diff)
downloadlinux-2c3c1048746a4622d8c89a29670120dc8fab93c4.tar.xz
linux-2c3c1048746a4622d8c89a29670120dc8fab93c4.zip
Adding upstream version 6.1.76.upstream/6.1.76upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'drivers/bluetooth/btintel.c')
-rw-r--r--drivers/bluetooth/btintel.c2662
1 files changed, 2662 insertions, 0 deletions
diff --git a/drivers/bluetooth/btintel.c b/drivers/bluetooth/btintel.c
new file mode 100644
index 000000000..bbad1207c
--- /dev/null
+++ b/drivers/bluetooth/btintel.c
@@ -0,0 +1,2662 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *
+ * Bluetooth support for Intel devices
+ *
+ * Copyright (C) 2015 Intel Corporation
+ */
+
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/regmap.h>
+#include <asm/unaligned.h>
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+
+#include "btintel.h"
+
+#define VERSION "0.1"
+
+#define BDADDR_INTEL (&(bdaddr_t){{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
+#define RSA_HEADER_LEN 644
+#define CSS_HEADER_OFFSET 8
+#define ECDSA_OFFSET 644
+#define ECDSA_HEADER_LEN 320
+
+#define CMD_WRITE_BOOT_PARAMS 0xfc0e
+struct cmd_write_boot_params {
+ u32 boot_addr;
+ u8 fw_build_num;
+ u8 fw_build_ww;
+ u8 fw_build_yy;
+} __packed;
+
+int btintel_check_bdaddr(struct hci_dev *hdev)
+{
+ struct hci_rp_read_bd_addr *bda;
+ struct sk_buff *skb;
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ int err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Reading Intel device address failed (%d)",
+ err);
+ return err;
+ }
+
+ if (skb->len != sizeof(*bda)) {
+ bt_dev_err(hdev, "Intel device address length mismatch");
+ kfree_skb(skb);
+ return -EIO;
+ }
+
+ bda = (struct hci_rp_read_bd_addr *)skb->data;
+
+ /* For some Intel based controllers, the default Bluetooth device
+ * address 00:03:19:9E:8B:00 can be found. These controllers are
+ * fully operational, but have the danger of duplicate addresses
+ * and that in turn can cause problems with Bluetooth operation.
+ */
+ if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) {
+ bt_dev_err(hdev, "Found Intel default device address (%pMR)",
+ &bda->bdaddr);
+ set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_check_bdaddr);
+
+int btintel_enter_mfg(struct hci_dev *hdev)
+{
+ static const u8 param[] = { 0x01, 0x00 };
+ struct sk_buff *skb;
+
+ skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Entering manufacturer mode failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_enter_mfg);
+
+int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched)
+{
+ u8 param[] = { 0x00, 0x00 };
+ struct sk_buff *skb;
+
+ /* The 2nd command parameter specifies the manufacturing exit method:
+ * 0x00: Just disable the manufacturing mode (0x00).
+ * 0x01: Disable manufacturing mode and reset with patches deactivated.
+ * 0x02: Disable manufacturing mode and reset with patches activated.
+ */
+ if (reset)
+ param[1] |= patched ? 0x02 : 0x01;
+
+ skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Exiting manufacturer mode failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_exit_mfg);
+
+int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
+{
+ struct sk_buff *skb;
+ int err;
+
+ skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Changing Intel device address failed (%d)",
+ err);
+ return err;
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_set_bdaddr);
+
+static int btintel_set_event_mask(struct hci_dev *hdev, bool debug)
+{
+ u8 mask[8] = { 0x87, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+ struct sk_buff *skb;
+ int err;
+
+ if (debug)
+ mask[1] |= 0x62;
+
+ skb = __hci_cmd_sync(hdev, 0xfc52, 8, mask, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(hdev, "Setting Intel event mask failed (%d)", err);
+ return err;
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+
+int btintel_set_diag(struct hci_dev *hdev, bool enable)
+{
+ struct sk_buff *skb;
+ u8 param[3];
+ int err;
+
+ if (enable) {
+ param[0] = 0x03;
+ param[1] = 0x03;
+ param[2] = 0x03;
+ } else {
+ param[0] = 0x00;
+ param[1] = 0x00;
+ param[2] = 0x00;
+ }
+
+ skb = __hci_cmd_sync(hdev, 0xfc43, 3, param, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ if (err == -ENODATA)
+ goto done;
+ bt_dev_err(hdev, "Changing Intel diagnostic mode failed (%d)",
+ err);
+ return err;
+ }
+ kfree_skb(skb);
+
+done:
+ btintel_set_event_mask(hdev, enable);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_set_diag);
+
+static int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable)
+{
+ int err, ret;
+
+ err = btintel_enter_mfg(hdev);
+ if (err)
+ return err;
+
+ ret = btintel_set_diag(hdev, enable);
+
+ err = btintel_exit_mfg(hdev, false, false);
+ if (err)
+ return err;
+
+ return ret;
+}
+
+static int btintel_set_diag_combined(struct hci_dev *hdev, bool enable)
+{
+ int ret;
+
+ /* Legacy ROM device needs to be in the manufacturer mode to apply
+ * diagnostic setting
+ *
+ * This flag is set after reading the Intel version.
+ */
+ if (btintel_test_flag(hdev, INTEL_ROM_LEGACY))
+ ret = btintel_set_diag_mfg(hdev, enable);
+ else
+ ret = btintel_set_diag(hdev, enable);
+
+ return ret;
+}
+
+static void btintel_hw_error(struct hci_dev *hdev, u8 code)
+{
+ struct sk_buff *skb;
+ u8 type = 0x00;
+
+ bt_dev_err(hdev, "Hardware error 0x%2.2x", code);
+
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reset after hardware error failed (%ld)",
+ PTR_ERR(skb));
+ return;
+ }
+ kfree_skb(skb);
+
+ skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Retrieving Intel exception info failed (%ld)",
+ PTR_ERR(skb));
+ return;
+ }
+
+ if (skb->len != 13) {
+ bt_dev_err(hdev, "Exception info size mismatch");
+ kfree_skb(skb);
+ return;
+ }
+
+ bt_dev_err(hdev, "Exception info %s", (char *)(skb->data + 1));
+
+ kfree_skb(skb);
+}
+
+int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
+{
+ const char *variant;
+
+ /* The hardware platform number has a fixed value of 0x37 and
+ * for now only accept this single value.
+ */
+ if (ver->hw_platform != 0x37) {
+ bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
+ ver->hw_platform);
+ return -EINVAL;
+ }
+
+ /* Check for supported iBT hardware variants of this firmware
+ * loading method.
+ *
+ * This check has been put in place to ensure correct forward
+ * compatibility options when newer hardware variants come along.
+ */
+ switch (ver->hw_variant) {
+ case 0x07: /* WP - Legacy ROM */
+ case 0x08: /* StP - Legacy ROM */
+ case 0x0b: /* SfP */
+ case 0x0c: /* WsP */
+ case 0x11: /* JfP */
+ case 0x12: /* ThP */
+ case 0x13: /* HrP */
+ case 0x14: /* CcP */
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
+ ver->hw_variant);
+ return -EINVAL;
+ }
+
+ switch (ver->fw_variant) {
+ case 0x01:
+ variant = "Legacy ROM 2.5";
+ break;
+ case 0x06:
+ variant = "Bootloader";
+ break;
+ case 0x22:
+ variant = "Legacy ROM 2.x";
+ break;
+ case 0x23:
+ variant = "Firmware";
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported firmware variant(%02x)", ver->fw_variant);
+ return -EINVAL;
+ }
+
+ bt_dev_info(hdev, "%s revision %u.%u build %u week %u %u",
+ variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
+ ver->fw_build_num, ver->fw_build_ww,
+ 2000 + ver->fw_build_yy);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_version_info);
+
+static int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
+ const void *param)
+{
+ while (plen > 0) {
+ struct sk_buff *skb;
+ u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen;
+
+ cmd_param[0] = fragment_type;
+ memcpy(cmd_param + 1, param, fragment_len);
+
+ skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1,
+ cmd_param, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ kfree_skb(skb);
+
+ plen -= fragment_len;
+ param += fragment_len;
+ }
+
+ return 0;
+}
+
+int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name)
+{
+ const struct firmware *fw;
+ struct sk_buff *skb;
+ const u8 *fw_ptr;
+ int err;
+
+ err = request_firmware_direct(&fw, ddc_name, &hdev->dev);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to load Intel DDC file %s (%d)",
+ ddc_name, err);
+ return err;
+ }
+
+ bt_dev_info(hdev, "Found Intel DDC parameters: %s", ddc_name);
+
+ fw_ptr = fw->data;
+
+ /* DDC file contains one or more DDC structure which has
+ * Length (1 byte), DDC ID (2 bytes), and DDC value (Length - 2).
+ */
+ while (fw->size > fw_ptr - fw->data) {
+ u8 cmd_plen = fw_ptr[0] + sizeof(u8);
+
+ skb = __hci_cmd_sync(hdev, 0xfc8b, cmd_plen, fw_ptr,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Failed to send Intel_Write_DDC (%ld)",
+ PTR_ERR(skb));
+ release_firmware(fw);
+ return PTR_ERR(skb);
+ }
+
+ fw_ptr += cmd_plen;
+ kfree_skb(skb);
+ }
+
+ release_firmware(fw);
+
+ bt_dev_info(hdev, "Applying Intel DDC parameters completed");
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_load_ddc_config);
+
+int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug)
+{
+ int err, ret;
+
+ err = btintel_enter_mfg(hdev);
+ if (err)
+ return err;
+
+ ret = btintel_set_event_mask(hdev, debug);
+
+ err = btintel_exit_mfg(hdev, false, false);
+ if (err)
+ return err;
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(btintel_set_event_mask_mfg);
+
+int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver)
+{
+ struct sk_buff *skb;
+
+ skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*ver)) {
+ bt_dev_err(hdev, "Intel version event size mismatch");
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ memcpy(ver, skb->data, sizeof(*ver));
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_read_version);
+
+static int btintel_version_info_tlv(struct hci_dev *hdev,
+ struct intel_version_tlv *version)
+{
+ const char *variant;
+
+ /* The hardware platform number has a fixed value of 0x37 and
+ * for now only accept this single value.
+ */
+ if (INTEL_HW_PLATFORM(version->cnvi_bt) != 0x37) {
+ bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
+ INTEL_HW_PLATFORM(version->cnvi_bt));
+ return -EINVAL;
+ }
+
+ /* Check for supported iBT hardware variants of this firmware
+ * loading method.
+ *
+ * This check has been put in place to ensure correct forward
+ * compatibility options when newer hardware variants come along.
+ */
+ switch (INTEL_HW_VARIANT(version->cnvi_bt)) {
+ case 0x17: /* TyP */
+ case 0x18: /* Slr */
+ case 0x19: /* Slr-F */
+ case 0x1b: /* Mgr */
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported Intel hardware variant (0x%x)",
+ INTEL_HW_VARIANT(version->cnvi_bt));
+ return -EINVAL;
+ }
+
+ switch (version->img_type) {
+ case 0x01:
+ variant = "Bootloader";
+ /* It is required that every single firmware fragment is acknowledged
+ * with a command complete event. If the boot parameters indicate
+ * that this bootloader does not send them, then abort the setup.
+ */
+ if (version->limited_cce != 0x00) {
+ bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)",
+ version->limited_cce);
+ return -EINVAL;
+ }
+
+ /* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */
+ if (version->sbe_type > 0x01) {
+ bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)",
+ version->sbe_type);
+ return -EINVAL;
+ }
+
+ bt_dev_info(hdev, "Device revision is %u", version->dev_rev_id);
+ bt_dev_info(hdev, "Secure boot is %s",
+ version->secure_boot ? "enabled" : "disabled");
+ bt_dev_info(hdev, "OTP lock is %s",
+ version->otp_lock ? "enabled" : "disabled");
+ bt_dev_info(hdev, "API lock is %s",
+ version->api_lock ? "enabled" : "disabled");
+ bt_dev_info(hdev, "Debug lock is %s",
+ version->debug_lock ? "enabled" : "disabled");
+ bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
+ version->min_fw_build_nn, version->min_fw_build_cw,
+ 2000 + version->min_fw_build_yy);
+ break;
+ case 0x03:
+ variant = "Firmware";
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported image type(%02x)", version->img_type);
+ return -EINVAL;
+ }
+
+ bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant,
+ 2000 + (version->timestamp >> 8), version->timestamp & 0xff,
+ version->build_type, version->build_num);
+
+ return 0;
+}
+
+static int btintel_parse_version_tlv(struct hci_dev *hdev,
+ struct intel_version_tlv *version,
+ struct sk_buff *skb)
+{
+ /* Consume Command Complete Status field */
+ skb_pull(skb, 1);
+
+ /* Event parameters contatin multiple TLVs. Read each of them
+ * and only keep the required data. Also, it use existing legacy
+ * version field like hw_platform, hw_variant, and fw_variant
+ * to keep the existing setup flow
+ */
+ while (skb->len) {
+ struct intel_tlv *tlv;
+
+ /* Make sure skb has a minimum length of the header */
+ if (skb->len < sizeof(*tlv))
+ return -EINVAL;
+
+ tlv = (struct intel_tlv *)skb->data;
+
+ /* Make sure skb has a enough data */
+ if (skb->len < tlv->len + sizeof(*tlv))
+ return -EINVAL;
+
+ switch (tlv->type) {
+ case INTEL_TLV_CNVI_TOP:
+ version->cnvi_top = get_unaligned_le32(tlv->val);
+ break;
+ case INTEL_TLV_CNVR_TOP:
+ version->cnvr_top = get_unaligned_le32(tlv->val);
+ break;
+ case INTEL_TLV_CNVI_BT:
+ version->cnvi_bt = get_unaligned_le32(tlv->val);
+ break;
+ case INTEL_TLV_CNVR_BT:
+ version->cnvr_bt = get_unaligned_le32(tlv->val);
+ break;
+ case INTEL_TLV_DEV_REV_ID:
+ version->dev_rev_id = get_unaligned_le16(tlv->val);
+ break;
+ case INTEL_TLV_IMAGE_TYPE:
+ version->img_type = tlv->val[0];
+ break;
+ case INTEL_TLV_TIME_STAMP:
+ /* If image type is Operational firmware (0x03), then
+ * running FW Calendar Week and Year information can
+ * be extracted from Timestamp information
+ */
+ version->min_fw_build_cw = tlv->val[0];
+ version->min_fw_build_yy = tlv->val[1];
+ version->timestamp = get_unaligned_le16(tlv->val);
+ break;
+ case INTEL_TLV_BUILD_TYPE:
+ version->build_type = tlv->val[0];
+ break;
+ case INTEL_TLV_BUILD_NUM:
+ /* If image type is Operational firmware (0x03), then
+ * running FW build number can be extracted from the
+ * Build information
+ */
+ version->min_fw_build_nn = tlv->val[0];
+ version->build_num = get_unaligned_le32(tlv->val);
+ break;
+ case INTEL_TLV_SECURE_BOOT:
+ version->secure_boot = tlv->val[0];
+ break;
+ case INTEL_TLV_OTP_LOCK:
+ version->otp_lock = tlv->val[0];
+ break;
+ case INTEL_TLV_API_LOCK:
+ version->api_lock = tlv->val[0];
+ break;
+ case INTEL_TLV_DEBUG_LOCK:
+ version->debug_lock = tlv->val[0];
+ break;
+ case INTEL_TLV_MIN_FW:
+ version->min_fw_build_nn = tlv->val[0];
+ version->min_fw_build_cw = tlv->val[1];
+ version->min_fw_build_yy = tlv->val[2];
+ break;
+ case INTEL_TLV_LIMITED_CCE:
+ version->limited_cce = tlv->val[0];
+ break;
+ case INTEL_TLV_SBE_TYPE:
+ version->sbe_type = tlv->val[0];
+ break;
+ case INTEL_TLV_OTP_BDADDR:
+ memcpy(&version->otp_bd_addr, tlv->val,
+ sizeof(bdaddr_t));
+ break;
+ default:
+ /* Ignore rest of information */
+ break;
+ }
+ /* consume the current tlv and move to next*/
+ skb_pull(skb, tlv->len + sizeof(*tlv));
+ }
+
+ return 0;
+}
+
+static int btintel_read_version_tlv(struct hci_dev *hdev,
+ struct intel_version_tlv *version)
+{
+ struct sk_buff *skb;
+ const u8 param[1] = { 0xFF };
+
+ if (!version)
+ return -EINVAL;
+
+ skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->data[0]) {
+ bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
+ skb->data[0]);
+ kfree_skb(skb);
+ return -EIO;
+ }
+
+ btintel_parse_version_tlv(hdev, version, skb);
+
+ kfree_skb(skb);
+ return 0;
+}
+
+/* ------- REGMAP IBT SUPPORT ------- */
+
+#define IBT_REG_MODE_8BIT 0x00
+#define IBT_REG_MODE_16BIT 0x01
+#define IBT_REG_MODE_32BIT 0x02
+
+struct regmap_ibt_context {
+ struct hci_dev *hdev;
+ __u16 op_write;
+ __u16 op_read;
+};
+
+struct ibt_cp_reg_access {
+ __le32 addr;
+ __u8 mode;
+ __u8 len;
+ __u8 data[];
+} __packed;
+
+struct ibt_rp_reg_access {
+ __u8 status;
+ __le32 addr;
+ __u8 data[];
+} __packed;
+
+static int regmap_ibt_read(void *context, const void *addr, size_t reg_size,
+ void *val, size_t val_size)
+{
+ struct regmap_ibt_context *ctx = context;
+ struct ibt_cp_reg_access cp;
+ struct ibt_rp_reg_access *rp;
+ struct sk_buff *skb;
+ int err = 0;
+
+ if (reg_size != sizeof(__le32))
+ return -EINVAL;
+
+ switch (val_size) {
+ case 1:
+ cp.mode = IBT_REG_MODE_8BIT;
+ break;
+ case 2:
+ cp.mode = IBT_REG_MODE_16BIT;
+ break;
+ case 4:
+ cp.mode = IBT_REG_MODE_32BIT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* regmap provides a little-endian formatted addr */
+ cp.addr = *(__le32 *)addr;
+ cp.len = val_size;
+
+ bt_dev_dbg(ctx->hdev, "Register (0x%x) read", le32_to_cpu(cp.addr));
+
+ skb = hci_cmd_sync(ctx->hdev, ctx->op_read, sizeof(cp), &cp,
+ HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error (%d)",
+ le32_to_cpu(cp.addr), err);
+ return err;
+ }
+
+ if (skb->len != sizeof(*rp) + val_size) {
+ bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad len",
+ le32_to_cpu(cp.addr));
+ err = -EINVAL;
+ goto done;
+ }
+
+ rp = (struct ibt_rp_reg_access *)skb->data;
+
+ if (rp->addr != cp.addr) {
+ bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad addr",
+ le32_to_cpu(rp->addr));
+ err = -EINVAL;
+ goto done;
+ }
+
+ memcpy(val, rp->data, val_size);
+
+done:
+ kfree_skb(skb);
+ return err;
+}
+
+static int regmap_ibt_gather_write(void *context,
+ const void *addr, size_t reg_size,
+ const void *val, size_t val_size)
+{
+ struct regmap_ibt_context *ctx = context;
+ struct ibt_cp_reg_access *cp;
+ struct sk_buff *skb;
+ int plen = sizeof(*cp) + val_size;
+ u8 mode;
+ int err = 0;
+
+ if (reg_size != sizeof(__le32))
+ return -EINVAL;
+
+ switch (val_size) {
+ case 1:
+ mode = IBT_REG_MODE_8BIT;
+ break;
+ case 2:
+ mode = IBT_REG_MODE_16BIT;
+ break;
+ case 4:
+ mode = IBT_REG_MODE_32BIT;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ cp = kmalloc(plen, GFP_KERNEL);
+ if (!cp)
+ return -ENOMEM;
+
+ /* regmap provides a little-endian formatted addr/value */
+ cp->addr = *(__le32 *)addr;
+ cp->mode = mode;
+ cp->len = val_size;
+ memcpy(&cp->data, val, val_size);
+
+ bt_dev_dbg(ctx->hdev, "Register (0x%x) write", le32_to_cpu(cp->addr));
+
+ skb = hci_cmd_sync(ctx->hdev, ctx->op_write, plen, cp, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ err = PTR_ERR(skb);
+ bt_dev_err(ctx->hdev, "regmap: Register (0x%x) write error (%d)",
+ le32_to_cpu(cp->addr), err);
+ goto done;
+ }
+ kfree_skb(skb);
+
+done:
+ kfree(cp);
+ return err;
+}
+
+static int regmap_ibt_write(void *context, const void *data, size_t count)
+{
+ /* data contains register+value, since we only support 32bit addr,
+ * minimum data size is 4 bytes.
+ */
+ if (WARN_ONCE(count < 4, "Invalid register access"))
+ return -EINVAL;
+
+ return regmap_ibt_gather_write(context, data, 4, data + 4, count - 4);
+}
+
+static void regmap_ibt_free_context(void *context)
+{
+ kfree(context);
+}
+
+static const struct regmap_bus regmap_ibt = {
+ .read = regmap_ibt_read,
+ .write = regmap_ibt_write,
+ .gather_write = regmap_ibt_gather_write,
+ .free_context = regmap_ibt_free_context,
+ .reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
+ .val_format_endian_default = REGMAP_ENDIAN_LITTLE,
+};
+
+/* Config is the same for all register regions */
+static const struct regmap_config regmap_ibt_cfg = {
+ .name = "btintel_regmap",
+ .reg_bits = 32,
+ .val_bits = 32,
+};
+
+struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
+ u16 opcode_write)
+{
+ struct regmap_ibt_context *ctx;
+
+ bt_dev_info(hdev, "regmap: Init R%x-W%x region", opcode_read,
+ opcode_write);
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return ERR_PTR(-ENOMEM);
+
+ ctx->op_read = opcode_read;
+ ctx->op_write = opcode_write;
+ ctx->hdev = hdev;
+
+ return regmap_init(&hdev->dev, &regmap_ibt, ctx, &regmap_ibt_cfg);
+}
+EXPORT_SYMBOL_GPL(btintel_regmap_init);
+
+int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param)
+{
+ struct intel_reset params = { 0x00, 0x01, 0x00, 0x01, 0x00000000 };
+ struct sk_buff *skb;
+
+ params.boot_param = cpu_to_le32(boot_param);
+
+ skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params), &params,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Failed to send Intel Reset command");
+ return PTR_ERR(skb);
+ }
+
+ kfree_skb(skb);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_send_intel_reset);
+
+int btintel_read_boot_params(struct hci_dev *hdev,
+ struct intel_boot_params *params)
+{
+ struct sk_buff *skb;
+
+ skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != sizeof(*params)) {
+ bt_dev_err(hdev, "Intel boot parameters size mismatch");
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ memcpy(params, skb->data, sizeof(*params));
+
+ kfree_skb(skb);
+
+ if (params->status) {
+ bt_dev_err(hdev, "Intel boot parameters command failed (%02x)",
+ params->status);
+ return -bt_to_errno(params->status);
+ }
+
+ bt_dev_info(hdev, "Device revision is %u",
+ le16_to_cpu(params->dev_revid));
+
+ bt_dev_info(hdev, "Secure boot is %s",
+ params->secure_boot ? "enabled" : "disabled");
+
+ bt_dev_info(hdev, "OTP lock is %s",
+ params->otp_lock ? "enabled" : "disabled");
+
+ bt_dev_info(hdev, "API lock is %s",
+ params->api_lock ? "enabled" : "disabled");
+
+ bt_dev_info(hdev, "Debug lock is %s",
+ params->debug_lock ? "enabled" : "disabled");
+
+ bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
+ params->min_fw_build_nn, params->min_fw_build_cw,
+ 2000 + params->min_fw_build_yy);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_read_boot_params);
+
+static int btintel_sfi_rsa_header_secure_send(struct hci_dev *hdev,
+ const struct firmware *fw)
+{
+ int err;
+
+ /* Start the firmware download transaction with the Init fragment
+ * represented by the 128 bytes of CSS header.
+ */
+ err = btintel_secure_send(hdev, 0x00, 128, fw->data);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
+ goto done;
+ }
+
+ /* Send the 256 bytes of public key information from the firmware
+ * as the PKey fragment.
+ */
+ err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err);
+ goto done;
+ }
+
+ /* Send the 256 bytes of signature information from the firmware
+ * as the Sign fragment.
+ */
+ err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send firmware signature (%d)", err);
+ goto done;
+ }
+
+done:
+ return err;
+}
+
+static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev,
+ const struct firmware *fw)
+{
+ int err;
+
+ /* Start the firmware download transaction with the Init fragment
+ * represented by the 128 bytes of CSS header.
+ */
+ err = btintel_secure_send(hdev, 0x00, 128, fw->data + 644);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
+ return err;
+ }
+
+ /* Send the 96 bytes of public key information from the firmware
+ * as the PKey fragment.
+ */
+ err = btintel_secure_send(hdev, 0x03, 96, fw->data + 644 + 128);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err);
+ return err;
+ }
+
+ /* Send the 96 bytes of signature information from the firmware
+ * as the Sign fragment
+ */
+ err = btintel_secure_send(hdev, 0x02, 96, fw->data + 644 + 224);
+ if (err < 0) {
+ bt_dev_err(hdev, "Failed to send firmware signature (%d)",
+ err);
+ return err;
+ }
+ return 0;
+}
+
+static int btintel_download_firmware_payload(struct hci_dev *hdev,
+ const struct firmware *fw,
+ size_t offset)
+{
+ int err;
+ const u8 *fw_ptr;
+ u32 frag_len;
+
+ fw_ptr = fw->data + offset;
+ frag_len = 0;
+ err = -EINVAL;
+
+ while (fw_ptr - fw->data < fw->size) {
+ struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
+
+ frag_len += sizeof(*cmd) + cmd->plen;
+
+ /* The parameter length of the secure send command requires
+ * a 4 byte alignment. It happens so that the firmware file
+ * contains proper Intel_NOP commands to align the fragments
+ * as needed.
+ *
+ * Send set of commands with 4 byte alignment from the
+ * firmware data buffer as a single Data fragement.
+ */
+ if (!(frag_len % 4)) {
+ err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
+ if (err < 0) {
+ bt_dev_err(hdev,
+ "Failed to send firmware data (%d)",
+ err);
+ goto done;
+ }
+
+ fw_ptr += frag_len;
+ frag_len = 0;
+ }
+ }
+
+done:
+ return err;
+}
+
+static bool btintel_firmware_version(struct hci_dev *hdev,
+ u8 num, u8 ww, u8 yy,
+ const struct firmware *fw,
+ u32 *boot_addr)
+{
+ const u8 *fw_ptr;
+
+ fw_ptr = fw->data;
+
+ while (fw_ptr - fw->data < fw->size) {
+ struct hci_command_hdr *cmd = (void *)(fw_ptr);
+
+ /* Each SKU has a different reset parameter to use in the
+ * HCI_Intel_Reset command and it is embedded in the firmware
+ * data. So, instead of using static value per SKU, check
+ * the firmware data and save it for later use.
+ */
+ if (le16_to_cpu(cmd->opcode) == CMD_WRITE_BOOT_PARAMS) {
+ struct cmd_write_boot_params *params;
+
+ params = (void *)(fw_ptr + sizeof(*cmd));
+
+ *boot_addr = le32_to_cpu(params->boot_addr);
+
+ bt_dev_info(hdev, "Boot Address: 0x%x", *boot_addr);
+
+ bt_dev_info(hdev, "Firmware Version: %u-%u.%u",
+ params->fw_build_num, params->fw_build_ww,
+ params->fw_build_yy);
+
+ return (num == params->fw_build_num &&
+ ww == params->fw_build_ww &&
+ yy == params->fw_build_yy);
+ }
+
+ fw_ptr += sizeof(*cmd) + cmd->plen;
+ }
+
+ return false;
+}
+
+int btintel_download_firmware(struct hci_dev *hdev,
+ struct intel_version *ver,
+ const struct firmware *fw,
+ u32 *boot_param)
+{
+ int err;
+
+ /* SfP and WsP don't seem to update the firmware version on file
+ * so version checking is currently not possible.
+ */
+ switch (ver->hw_variant) {
+ case 0x0b: /* SfP */
+ case 0x0c: /* WsP */
+ /* Skip version checking */
+ break;
+ default:
+
+ /* Skip download if firmware has the same version */
+ if (btintel_firmware_version(hdev, ver->fw_build_num,
+ ver->fw_build_ww, ver->fw_build_yy,
+ fw, boot_param)) {
+ bt_dev_info(hdev, "Firmware already loaded");
+ /* Return -EALREADY to indicate that the firmware has
+ * already been loaded.
+ */
+ return -EALREADY;
+ }
+ }
+
+ /* The firmware variant determines if the device is in bootloader
+ * mode or is running operational firmware. The value 0x06 identifies
+ * the bootloader and the value 0x23 identifies the operational
+ * firmware.
+ *
+ * If the firmware version has changed that means it needs to be reset
+ * to bootloader when operational so the new firmware can be loaded.
+ */
+ if (ver->fw_variant == 0x23)
+ return -EINVAL;
+
+ err = btintel_sfi_rsa_header_secure_send(hdev, fw);
+ if (err)
+ return err;
+
+ return btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
+}
+EXPORT_SYMBOL_GPL(btintel_download_firmware);
+
+static int btintel_download_fw_tlv(struct hci_dev *hdev,
+ struct intel_version_tlv *ver,
+ const struct firmware *fw, u32 *boot_param,
+ u8 hw_variant, u8 sbe_type)
+{
+ int err;
+ u32 css_header_ver;
+
+ /* Skip download if firmware has the same version */
+ if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
+ ver->min_fw_build_cw,
+ ver->min_fw_build_yy,
+ fw, boot_param)) {
+ bt_dev_info(hdev, "Firmware already loaded");
+ /* Return -EALREADY to indicate that firmware has
+ * already been loaded.
+ */
+ return -EALREADY;
+ }
+
+ /* The firmware variant determines if the device is in bootloader
+ * mode or is running operational firmware. The value 0x01 identifies
+ * the bootloader and the value 0x03 identifies the operational
+ * firmware.
+ *
+ * If the firmware version has changed that means it needs to be reset
+ * to bootloader when operational so the new firmware can be loaded.
+ */
+ if (ver->img_type == 0x03)
+ return -EINVAL;
+
+ /* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
+ * only RSA secure boot engine. Hence, the corresponding sfi file will
+ * have RSA header of 644 bytes followed by Command Buffer.
+ *
+ * iBT hardware variants 0x17, 0x18 onwards support both RSA and ECDSA
+ * secure boot engine. As a result, the corresponding sfi file will
+ * have RSA header of 644, ECDSA header of 320 bytes followed by
+ * Command Buffer.
+ *
+ * CSS Header byte positions 0x08 to 0x0B represent the CSS Header
+ * version: RSA(0x00010000) , ECDSA (0x00020000)
+ */
+ css_header_ver = get_unaligned_le32(fw->data + CSS_HEADER_OFFSET);
+ if (css_header_ver != 0x00010000) {
+ bt_dev_err(hdev, "Invalid CSS Header version");
+ return -EINVAL;
+ }
+
+ if (hw_variant <= 0x14) {
+ if (sbe_type != 0x00) {
+ bt_dev_err(hdev, "Invalid SBE type for hardware variant (%d)",
+ hw_variant);
+ return -EINVAL;
+ }
+
+ err = btintel_sfi_rsa_header_secure_send(hdev, fw);
+ if (err)
+ return err;
+
+ err = btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
+ if (err)
+ return err;
+ } else if (hw_variant >= 0x17) {
+ /* Check if CSS header for ECDSA follows the RSA header */
+ if (fw->data[ECDSA_OFFSET] != 0x06)
+ return -EINVAL;
+
+ /* Check if the CSS Header version is ECDSA(0x00020000) */
+ css_header_ver = get_unaligned_le32(fw->data + ECDSA_OFFSET + CSS_HEADER_OFFSET);
+ if (css_header_ver != 0x00020000) {
+ bt_dev_err(hdev, "Invalid CSS Header version");
+ return -EINVAL;
+ }
+
+ if (sbe_type == 0x00) {
+ err = btintel_sfi_rsa_header_secure_send(hdev, fw);
+ if (err)
+ return err;
+
+ err = btintel_download_firmware_payload(hdev, fw,
+ RSA_HEADER_LEN + ECDSA_HEADER_LEN);
+ if (err)
+ return err;
+ } else if (sbe_type == 0x01) {
+ err = btintel_sfi_ecdsa_header_secure_send(hdev, fw);
+ if (err)
+ return err;
+
+ err = btintel_download_firmware_payload(hdev, fw,
+ RSA_HEADER_LEN + ECDSA_HEADER_LEN);
+ if (err)
+ return err;
+ }
+ }
+ return 0;
+}
+
+static void btintel_reset_to_bootloader(struct hci_dev *hdev)
+{
+ struct intel_reset params;
+ struct sk_buff *skb;
+
+ /* Send Intel Reset command. This will result in
+ * re-enumeration of BT controller.
+ *
+ * Intel Reset parameter description:
+ * reset_type : 0x00 (Soft reset),
+ * 0x01 (Hard reset)
+ * patch_enable : 0x00 (Do not enable),
+ * 0x01 (Enable)
+ * ddc_reload : 0x00 (Do not reload),
+ * 0x01 (Reload)
+ * boot_option: 0x00 (Current image),
+ * 0x01 (Specified boot address)
+ * boot_param: Boot address
+ *
+ */
+ params.reset_type = 0x01;
+ params.patch_enable = 0x01;
+ params.ddc_reload = 0x01;
+ params.boot_option = 0x00;
+ params.boot_param = cpu_to_le32(0x00000000);
+
+ skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params),
+ &params, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "FW download error recovery failed (%ld)",
+ PTR_ERR(skb));
+ return;
+ }
+ bt_dev_info(hdev, "Intel reset sent to retry FW download");
+ kfree_skb(skb);
+
+ /* Current Intel BT controllers(ThP/JfP) hold the USB reset
+ * lines for 2ms when it receives Intel Reset in bootloader mode.
+ * Whereas, the upcoming Intel BT controllers will hold USB reset
+ * for 150ms. To keep the delay generic, 150ms is chosen here.
+ */
+ msleep(150);
+}
+
+static int btintel_read_debug_features(struct hci_dev *hdev,
+ struct intel_debug_features *features)
+{
+ struct sk_buff *skb;
+ u8 page_no = 1;
+
+ /* Intel controller supports two pages, each page is of 128-bit
+ * feature bit mask. And each bit defines specific feature support
+ */
+ skb = __hci_cmd_sync(hdev, 0xfca6, sizeof(page_no), &page_no,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading supported features failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len != (sizeof(features->page1) + 3)) {
+ bt_dev_err(hdev, "Supported features event size mismatch");
+ kfree_skb(skb);
+ return -EILSEQ;
+ }
+
+ memcpy(features->page1, skb->data + 3, sizeof(features->page1));
+
+ /* Read the supported features page2 if required in future.
+ */
+ kfree_skb(skb);
+ return 0;
+}
+
+static int btintel_set_debug_features(struct hci_dev *hdev,
+ const struct intel_debug_features *features)
+{
+ u8 mask[11] = { 0x0a, 0x92, 0x02, 0x7f, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00 };
+ u8 period[5] = { 0x04, 0x91, 0x02, 0x05, 0x00 };
+ u8 trace_enable = 0x02;
+ struct sk_buff *skb;
+
+ if (!features) {
+ bt_dev_warn(hdev, "Debug features not read");
+ return -EINVAL;
+ }
+
+ if (!(features->page1[0] & 0x3f)) {
+ bt_dev_info(hdev, "Telemetry exception format not supported");
+ return 0;
+ }
+
+ skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ skb = __hci_cmd_sync(hdev, 0xfc8b, 5, period, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Setting periodicity for link statistics traces failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ skb = __hci_cmd_sync(hdev, 0xfca1, 1, &trace_enable, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Enable tracing of link statistics events failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ bt_dev_info(hdev, "set debug features: trace_enable 0x%02x mask 0x%02x",
+ trace_enable, mask[3]);
+
+ return 0;
+}
+
+static int btintel_reset_debug_features(struct hci_dev *hdev,
+ const struct intel_debug_features *features)
+{
+ u8 mask[11] = { 0x0a, 0x92, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00 };
+ u8 trace_enable = 0x00;
+ struct sk_buff *skb;
+
+ if (!features) {
+ bt_dev_warn(hdev, "Debug features not read");
+ return -EINVAL;
+ }
+
+ if (!(features->page1[0] & 0x3f)) {
+ bt_dev_info(hdev, "Telemetry exception format not supported");
+ return 0;
+ }
+
+ /* Should stop the trace before writing ddc event mask. */
+ skb = __hci_cmd_sync(hdev, 0xfca1, 1, &trace_enable, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Stop tracing of link statistics events failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+ bt_dev_info(hdev, "reset debug features: trace_enable 0x%02x mask 0x%02x",
+ trace_enable, mask[3]);
+
+ return 0;
+}
+
+int btintel_set_quality_report(struct hci_dev *hdev, bool enable)
+{
+ struct intel_debug_features features;
+ int err;
+
+ bt_dev_dbg(hdev, "enable %d", enable);
+
+ /* Read the Intel supported features and if new exception formats
+ * supported, need to load the additional DDC config to enable.
+ */
+ err = btintel_read_debug_features(hdev, &features);
+ if (err)
+ return err;
+
+ /* Set or reset the debug features. */
+ if (enable)
+ err = btintel_set_debug_features(hdev, &features);
+ else
+ err = btintel_reset_debug_features(hdev, &features);
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(btintel_set_quality_report);
+
+static const struct firmware *btintel_legacy_rom_get_fw(struct hci_dev *hdev,
+ struct intel_version *ver)
+{
+ const struct firmware *fw;
+ char fwname[64];
+ int ret;
+
+ snprintf(fwname, sizeof(fwname),
+ "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
+ ver->hw_platform, ver->hw_variant, ver->hw_revision,
+ ver->fw_variant, ver->fw_revision, ver->fw_build_num,
+ ver->fw_build_ww, ver->fw_build_yy);
+
+ ret = request_firmware(&fw, fwname, &hdev->dev);
+ if (ret < 0) {
+ if (ret == -EINVAL) {
+ bt_dev_err(hdev, "Intel firmware file request failed (%d)",
+ ret);
+ return NULL;
+ }
+
+ bt_dev_err(hdev, "failed to open Intel firmware file: %s (%d)",
+ fwname, ret);
+
+ /* If the correct firmware patch file is not found, use the
+ * default firmware patch file instead
+ */
+ snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
+ ver->hw_platform, ver->hw_variant);
+ if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
+ bt_dev_err(hdev, "failed to open default fw file: %s",
+ fwname);
+ return NULL;
+ }
+ }
+
+ bt_dev_info(hdev, "Intel Bluetooth firmware file: %s", fwname);
+
+ return fw;
+}
+
+static int btintel_legacy_rom_patching(struct hci_dev *hdev,
+ const struct firmware *fw,
+ const u8 **fw_ptr, int *disable_patch)
+{
+ struct sk_buff *skb;
+ struct hci_command_hdr *cmd;
+ const u8 *cmd_param;
+ struct hci_event_hdr *evt = NULL;
+ const u8 *evt_param = NULL;
+ int remain = fw->size - (*fw_ptr - fw->data);
+
+ /* The first byte indicates the types of the patch command or event.
+ * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
+ * in the current firmware buffer doesn't start with 0x01 or
+ * the size of remain buffer is smaller than HCI command header,
+ * the firmware file is corrupted and it should stop the patching
+ * process.
+ */
+ if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
+ bt_dev_err(hdev, "Intel fw corrupted: invalid cmd read");
+ return -EINVAL;
+ }
+ (*fw_ptr)++;
+ remain--;
+
+ cmd = (struct hci_command_hdr *)(*fw_ptr);
+ *fw_ptr += sizeof(*cmd);
+ remain -= sizeof(*cmd);
+
+ /* Ensure that the remain firmware data is long enough than the length
+ * of command parameter. If not, the firmware file is corrupted.
+ */
+ if (remain < cmd->plen) {
+ bt_dev_err(hdev, "Intel fw corrupted: invalid cmd len");
+ return -EFAULT;
+ }
+
+ /* If there is a command that loads a patch in the firmware
+ * file, then enable the patch upon success, otherwise just
+ * disable the manufacturer mode, for example patch activation
+ * is not required when the default firmware patch file is used
+ * because there are no patch data to load.
+ */
+ if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
+ *disable_patch = 0;
+
+ cmd_param = *fw_ptr;
+ *fw_ptr += cmd->plen;
+ remain -= cmd->plen;
+
+ /* This reads the expected events when the above command is sent to the
+ * device. Some vendor commands expects more than one events, for
+ * example command status event followed by vendor specific event.
+ * For this case, it only keeps the last expected event. so the command
+ * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
+ * last expected event.
+ */
+ while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
+ (*fw_ptr)++;
+ remain--;
+
+ evt = (struct hci_event_hdr *)(*fw_ptr);
+ *fw_ptr += sizeof(*evt);
+ remain -= sizeof(*evt);
+
+ if (remain < evt->plen) {
+ bt_dev_err(hdev, "Intel fw corrupted: invalid evt len");
+ return -EFAULT;
+ }
+
+ evt_param = *fw_ptr;
+ *fw_ptr += evt->plen;
+ remain -= evt->plen;
+ }
+
+ /* Every HCI commands in the firmware file has its correspond event.
+ * If event is not found or remain is smaller than zero, the firmware
+ * file is corrupted.
+ */
+ if (!evt || !evt_param || remain < 0) {
+ bt_dev_err(hdev, "Intel fw corrupted: invalid evt read");
+ return -EFAULT;
+ }
+
+ skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
+ cmd_param, evt->evt, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "sending Intel patch command (0x%4.4x) failed (%ld)",
+ cmd->opcode, PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ /* It ensures that the returned event matches the event data read from
+ * the firmware file. At fist, it checks the length and then
+ * the contents of the event.
+ */
+ if (skb->len != evt->plen) {
+ bt_dev_err(hdev, "mismatch event length (opcode 0x%4.4x)",
+ le16_to_cpu(cmd->opcode));
+ kfree_skb(skb);
+ return -EFAULT;
+ }
+
+ if (memcmp(skb->data, evt_param, evt->plen)) {
+ bt_dev_err(hdev, "mismatch event parameter (opcode 0x%4.4x)",
+ le16_to_cpu(cmd->opcode));
+ kfree_skb(skb);
+ return -EFAULT;
+ }
+ kfree_skb(skb);
+
+ return 0;
+}
+
+static int btintel_legacy_rom_setup(struct hci_dev *hdev,
+ struct intel_version *ver)
+{
+ const struct firmware *fw;
+ const u8 *fw_ptr;
+ int disable_patch, err;
+ struct intel_version new_ver;
+
+ BT_DBG("%s", hdev->name);
+
+ /* fw_patch_num indicates the version of patch the device currently
+ * have. If there is no patch data in the device, it is always 0x00.
+ * So, if it is other than 0x00, no need to patch the device again.
+ */
+ if (ver->fw_patch_num) {
+ bt_dev_info(hdev,
+ "Intel device is already patched. patch num: %02x",
+ ver->fw_patch_num);
+ goto complete;
+ }
+
+ /* Opens the firmware patch file based on the firmware version read
+ * from the controller. If it fails to open the matching firmware
+ * patch file, it tries to open the default firmware patch file.
+ * If no patch file is found, allow the device to operate without
+ * a patch.
+ */
+ fw = btintel_legacy_rom_get_fw(hdev, ver);
+ if (!fw)
+ goto complete;
+ fw_ptr = fw->data;
+
+ /* Enable the manufacturer mode of the controller.
+ * Only while this mode is enabled, the driver can download the
+ * firmware patch data and configuration parameters.
+ */
+ err = btintel_enter_mfg(hdev);
+ if (err) {
+ release_firmware(fw);
+ return err;
+ }
+
+ disable_patch = 1;
+
+ /* The firmware data file consists of list of Intel specific HCI
+ * commands and its expected events. The first byte indicates the
+ * type of the message, either HCI command or HCI event.
+ *
+ * It reads the command and its expected event from the firmware file,
+ * and send to the controller. Once __hci_cmd_sync_ev() returns,
+ * the returned event is compared with the event read from the firmware
+ * file and it will continue until all the messages are downloaded to
+ * the controller.
+ *
+ * Once the firmware patching is completed successfully,
+ * the manufacturer mode is disabled with reset and activating the
+ * downloaded patch.
+ *
+ * If the firmware patching fails, the manufacturer mode is
+ * disabled with reset and deactivating the patch.
+ *
+ * If the default patch file is used, no reset is done when disabling
+ * the manufacturer.
+ */
+ while (fw->size > fw_ptr - fw->data) {
+ int ret;
+
+ ret = btintel_legacy_rom_patching(hdev, fw, &fw_ptr,
+ &disable_patch);
+ if (ret < 0)
+ goto exit_mfg_deactivate;
+ }
+
+ release_firmware(fw);
+
+ if (disable_patch)
+ goto exit_mfg_disable;
+
+ /* Patching completed successfully and disable the manufacturer mode
+ * with reset and activate the downloaded firmware patches.
+ */
+ err = btintel_exit_mfg(hdev, true, true);
+ if (err)
+ return err;
+
+ /* Need build number for downloaded fw patches in
+ * every power-on boot
+ */
+ err = btintel_read_version(hdev, &new_ver);
+ if (err)
+ return err;
+
+ bt_dev_info(hdev, "Intel BT fw patch 0x%02x completed & activated",
+ new_ver.fw_patch_num);
+
+ goto complete;
+
+exit_mfg_disable:
+ /* Disable the manufacturer mode without reset */
+ err = btintel_exit_mfg(hdev, false, false);
+ if (err)
+ return err;
+
+ bt_dev_info(hdev, "Intel firmware patch completed");
+
+ goto complete;
+
+exit_mfg_deactivate:
+ release_firmware(fw);
+
+ /* Patching failed. Disable the manufacturer mode with reset and
+ * deactivate the downloaded firmware patches.
+ */
+ err = btintel_exit_mfg(hdev, true, false);
+ if (err)
+ return err;
+
+ bt_dev_info(hdev, "Intel firmware patch completed and deactivated");
+
+complete:
+ /* Set the event mask for Intel specific vendor events. This enables
+ * a few extra events that are useful during general operation.
+ */
+ btintel_set_event_mask_mfg(hdev, false);
+
+ btintel_check_bdaddr(hdev);
+
+ return 0;
+}
+
+static int btintel_download_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
+{
+ ktime_t delta, rettime;
+ unsigned long long duration;
+ int err;
+
+ btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+
+ bt_dev_info(hdev, "Waiting for firmware download to complete");
+
+ err = btintel_wait_on_flag_timeout(hdev, INTEL_DOWNLOADING,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(msec));
+ if (err == -EINTR) {
+ bt_dev_err(hdev, "Firmware loading interrupted");
+ return err;
+ }
+
+ if (err) {
+ bt_dev_err(hdev, "Firmware loading timeout");
+ return -ETIMEDOUT;
+ }
+
+ if (btintel_test_flag(hdev, INTEL_FIRMWARE_FAILED)) {
+ bt_dev_err(hdev, "Firmware loading failed");
+ return -ENOEXEC;
+ }
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long)ktime_to_ns(delta) >> 10;
+
+ bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
+
+ return 0;
+}
+
+static int btintel_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
+{
+ ktime_t delta, rettime;
+ unsigned long long duration;
+ int err;
+
+ bt_dev_info(hdev, "Waiting for device to boot");
+
+ err = btintel_wait_on_flag_timeout(hdev, INTEL_BOOTING,
+ TASK_INTERRUPTIBLE,
+ msecs_to_jiffies(msec));
+ if (err == -EINTR) {
+ bt_dev_err(hdev, "Device boot interrupted");
+ return -EINTR;
+ }
+
+ if (err) {
+ bt_dev_err(hdev, "Device boot timeout");
+ return -ETIMEDOUT;
+ }
+
+ rettime = ktime_get();
+ delta = ktime_sub(rettime, calltime);
+ duration = (unsigned long long) ktime_to_ns(delta) >> 10;
+
+ bt_dev_info(hdev, "Device booted in %llu usecs", duration);
+
+ return 0;
+}
+
+static int btintel_boot(struct hci_dev *hdev, u32 boot_addr)
+{
+ ktime_t calltime;
+ int err;
+
+ calltime = ktime_get();
+
+ btintel_set_flag(hdev, INTEL_BOOTING);
+
+ err = btintel_send_intel_reset(hdev, boot_addr);
+ if (err) {
+ bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
+ btintel_reset_to_bootloader(hdev);
+ return err;
+ }
+
+ /* The bootloader will not indicate when the device is ready. This
+ * is done by the operational firmware sending bootup notification.
+ *
+ * Booting into operational firmware should not take longer than
+ * 1 second. However if that happens, then just fail the setup
+ * since something went wrong.
+ */
+ err = btintel_boot_wait(hdev, calltime, 1000);
+ if (err == -ETIMEDOUT)
+ btintel_reset_to_bootloader(hdev);
+
+ return err;
+}
+
+static int btintel_get_fw_name(struct intel_version *ver,
+ struct intel_boot_params *params,
+ char *fw_name, size_t len,
+ const char *suffix)
+{
+ switch (ver->hw_variant) {
+ case 0x0b: /* SfP */
+ case 0x0c: /* WsP */
+ snprintf(fw_name, len, "intel/ibt-%u-%u.%s",
+ le16_to_cpu(ver->hw_variant),
+ le16_to_cpu(params->dev_revid),
+ suffix);
+ break;
+ case 0x11: /* JfP */
+ case 0x12: /* ThP */
+ case 0x13: /* HrP */
+ case 0x14: /* CcP */
+ snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s",
+ le16_to_cpu(ver->hw_variant),
+ le16_to_cpu(ver->hw_revision),
+ le16_to_cpu(ver->fw_revision),
+ suffix);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int btintel_download_fw(struct hci_dev *hdev,
+ struct intel_version *ver,
+ struct intel_boot_params *params,
+ u32 *boot_param)
+{
+ const struct firmware *fw;
+ char fwname[64];
+ int err;
+ ktime_t calltime;
+
+ if (!ver || !params)
+ return -EINVAL;
+
+ /* The firmware variant determines if the device is in bootloader
+ * mode or is running operational firmware. The value 0x06 identifies
+ * the bootloader and the value 0x23 identifies the operational
+ * firmware.
+ *
+ * When the operational firmware is already present, then only
+ * the check for valid Bluetooth device address is needed. This
+ * determines if the device will be added as configured or
+ * unconfigured controller.
+ *
+ * It is not possible to use the Secure Boot Parameters in this
+ * case since that command is only available in bootloader mode.
+ */
+ if (ver->fw_variant == 0x23) {
+ btintel_clear_flag(hdev, INTEL_BOOTLOADER);
+ btintel_check_bdaddr(hdev);
+
+ /* SfP and WsP don't seem to update the firmware version on file
+ * so version checking is currently possible.
+ */
+ switch (ver->hw_variant) {
+ case 0x0b: /* SfP */
+ case 0x0c: /* WsP */
+ return 0;
+ }
+
+ /* Proceed to download to check if the version matches */
+ goto download;
+ }
+
+ /* Read the secure boot parameters to identify the operating
+ * details of the bootloader.
+ */
+ err = btintel_read_boot_params(hdev, params);
+ if (err)
+ return err;
+
+ /* It is required that every single firmware fragment is acknowledged
+ * with a command complete event. If the boot parameters indicate
+ * that this bootloader does not send them, then abort the setup.
+ */
+ if (params->limited_cce != 0x00) {
+ bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
+ params->limited_cce);
+ return -EINVAL;
+ }
+
+ /* If the OTP has no valid Bluetooth device address, then there will
+ * also be no valid address for the operational firmware.
+ */
+ if (!bacmp(&params->otp_bdaddr, BDADDR_ANY)) {
+ bt_dev_info(hdev, "No device address configured");
+ set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+ }
+
+download:
+ /* With this Intel bootloader only the hardware variant and device
+ * revision information are used to select the right firmware for SfP
+ * and WsP.
+ *
+ * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
+ *
+ * Currently the supported hardware variants are:
+ * 11 (0x0b) for iBT3.0 (LnP/SfP)
+ * 12 (0x0c) for iBT3.5 (WsP)
+ *
+ * For ThP/JfP and for future SKU's, the FW name varies based on HW
+ * variant, HW revision and FW revision, as these are dependent on CNVi
+ * and RF Combination.
+ *
+ * 17 (0x11) for iBT3.5 (JfP)
+ * 18 (0x12) for iBT3.5 (ThP)
+ *
+ * The firmware file name for these will be
+ * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
+ *
+ */
+ err = btintel_get_fw_name(ver, params, fwname, sizeof(fwname), "sfi");
+ if (err < 0) {
+ if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
+ /* Firmware has already been loaded */
+ btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+ return 0;
+ }
+
+ bt_dev_err(hdev, "Unsupported Intel firmware naming");
+ return -EINVAL;
+ }
+
+ err = firmware_request_nowarn(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
+ /* Firmware has already been loaded */
+ btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+ return 0;
+ }
+
+ bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
+ fwname, err);
+ return err;
+ }
+
+ bt_dev_info(hdev, "Found device firmware: %s", fwname);
+
+ if (fw->size < 644) {
+ bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
+ fw->size);
+ err = -EBADF;
+ goto done;
+ }
+
+ calltime = ktime_get();
+
+ btintel_set_flag(hdev, INTEL_DOWNLOADING);
+
+ /* Start firmware downloading and get boot parameter */
+ err = btintel_download_firmware(hdev, ver, fw, boot_param);
+ if (err < 0) {
+ if (err == -EALREADY) {
+ /* Firmware has already been loaded */
+ btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+ err = 0;
+ goto done;
+ }
+
+ /* When FW download fails, send Intel Reset to retry
+ * FW download.
+ */
+ btintel_reset_to_bootloader(hdev);
+ goto done;
+ }
+
+ /* Before switching the device into operational mode and with that
+ * booting the loaded firmware, wait for the bootloader notification
+ * that all fragments have been successfully received.
+ *
+ * When the event processing receives the notification, then the
+ * INTEL_DOWNLOADING flag will be cleared.
+ *
+ * The firmware loading should not take longer than 5 seconds
+ * and thus just timeout if that happens and fail the setup
+ * of this device.
+ */
+ err = btintel_download_wait(hdev, calltime, 5000);
+ if (err == -ETIMEDOUT)
+ btintel_reset_to_bootloader(hdev);
+
+done:
+ release_firmware(fw);
+ return err;
+}
+
+static int btintel_bootloader_setup(struct hci_dev *hdev,
+ struct intel_version *ver)
+{
+ struct intel_version new_ver;
+ struct intel_boot_params params;
+ u32 boot_param;
+ char ddcname[64];
+ int err;
+
+ BT_DBG("%s", hdev->name);
+
+ /* Set the default boot parameter to 0x0 and it is updated to
+ * SKU specific boot parameter after reading Intel_Write_Boot_Params
+ * command while downloading the firmware.
+ */
+ boot_param = 0x00000000;
+
+ btintel_set_flag(hdev, INTEL_BOOTLOADER);
+
+ err = btintel_download_fw(hdev, ver, &params, &boot_param);
+ if (err)
+ return err;
+
+ /* controller is already having an operational firmware */
+ if (ver->fw_variant == 0x23)
+ goto finish;
+
+ err = btintel_boot(hdev, boot_param);
+ if (err)
+ return err;
+
+ btintel_clear_flag(hdev, INTEL_BOOTLOADER);
+
+ err = btintel_get_fw_name(ver, &params, ddcname,
+ sizeof(ddcname), "ddc");
+
+ if (err < 0) {
+ bt_dev_err(hdev, "Unsupported Intel firmware naming");
+ } else {
+ /* Once the device is running in operational mode, it needs to
+ * apply the device configuration (DDC) parameters.
+ *
+ * The device can work without DDC parameters, so even if it
+ * fails to load the file, no need to fail the setup.
+ */
+ btintel_load_ddc_config(hdev, ddcname);
+ }
+
+ hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT);
+
+ /* Read the Intel version information after loading the FW */
+ err = btintel_read_version(hdev, &new_ver);
+ if (err)
+ return err;
+
+ btintel_version_info(hdev, &new_ver);
+
+finish:
+ /* Set the event mask for Intel specific vendor events. This enables
+ * a few extra events that are useful during general operation. It
+ * does not enable any debugging related events.
+ *
+ * The device will function correctly without these events enabled
+ * and thus no need to fail the setup.
+ */
+ btintel_set_event_mask(hdev, false);
+
+ return 0;
+}
+
+static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver,
+ char *fw_name, size_t len,
+ const char *suffix)
+{
+ /* The firmware file name for new generation controllers will be
+ * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step>
+ */
+ snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s",
+ INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvi_top),
+ INTEL_CNVX_TOP_STEP(ver->cnvi_top)),
+ INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top),
+ INTEL_CNVX_TOP_STEP(ver->cnvr_top)),
+ suffix);
+}
+
+static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev,
+ struct intel_version_tlv *ver,
+ u32 *boot_param)
+{
+ const struct firmware *fw;
+ char fwname[64];
+ int err;
+ ktime_t calltime;
+
+ if (!ver || !boot_param)
+ return -EINVAL;
+
+ /* The firmware variant determines if the device is in bootloader
+ * mode or is running operational firmware. The value 0x03 identifies
+ * the bootloader and the value 0x23 identifies the operational
+ * firmware.
+ *
+ * When the operational firmware is already present, then only
+ * the check for valid Bluetooth device address is needed. This
+ * determines if the device will be added as configured or
+ * unconfigured controller.
+ *
+ * It is not possible to use the Secure Boot Parameters in this
+ * case since that command is only available in bootloader mode.
+ */
+ if (ver->img_type == 0x03) {
+ btintel_clear_flag(hdev, INTEL_BOOTLOADER);
+ btintel_check_bdaddr(hdev);
+ } else {
+ /*
+ * Check for valid bd address in boot loader mode. Device
+ * will be marked as unconfigured if empty bd address is
+ * found.
+ */
+ if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) {
+ bt_dev_info(hdev, "No device address configured");
+ set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
+ }
+ }
+
+ btintel_get_fw_name_tlv(ver, fwname, sizeof(fwname), "sfi");
+ err = firmware_request_nowarn(&fw, fwname, &hdev->dev);
+ if (err < 0) {
+ if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
+ /* Firmware has already been loaded */
+ btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+ return 0;
+ }
+
+ bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
+ fwname, err);
+
+ return err;
+ }
+
+ bt_dev_info(hdev, "Found device firmware: %s", fwname);
+
+ if (fw->size < 644) {
+ bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
+ fw->size);
+ err = -EBADF;
+ goto done;
+ }
+
+ calltime = ktime_get();
+
+ btintel_set_flag(hdev, INTEL_DOWNLOADING);
+
+ /* Start firmware downloading and get boot parameter */
+ err = btintel_download_fw_tlv(hdev, ver, fw, boot_param,
+ INTEL_HW_VARIANT(ver->cnvi_bt),
+ ver->sbe_type);
+ if (err < 0) {
+ if (err == -EALREADY) {
+ /* Firmware has already been loaded */
+ btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
+ err = 0;
+ goto done;
+ }
+
+ /* When FW download fails, send Intel Reset to retry
+ * FW download.
+ */
+ btintel_reset_to_bootloader(hdev);
+ goto done;
+ }
+
+ /* Before switching the device into operational mode and with that
+ * booting the loaded firmware, wait for the bootloader notification
+ * that all fragments have been successfully received.
+ *
+ * When the event processing receives the notification, then the
+ * BTUSB_DOWNLOADING flag will be cleared.
+ *
+ * The firmware loading should not take longer than 5 seconds
+ * and thus just timeout if that happens and fail the setup
+ * of this device.
+ */
+ err = btintel_download_wait(hdev, calltime, 5000);
+ if (err == -ETIMEDOUT)
+ btintel_reset_to_bootloader(hdev);
+
+done:
+ release_firmware(fw);
+ return err;
+}
+
+static int btintel_get_codec_config_data(struct hci_dev *hdev,
+ __u8 link, struct bt_codec *codec,
+ __u8 *ven_len, __u8 **ven_data)
+{
+ int err = 0;
+
+ if (!ven_data || !ven_len)
+ return -EINVAL;
+
+ *ven_len = 0;
+ *ven_data = NULL;
+
+ if (link != ESCO_LINK) {
+ bt_dev_err(hdev, "Invalid link type(%u)", link);
+ return -EINVAL;
+ }
+
+ *ven_data = kmalloc(sizeof(__u8), GFP_KERNEL);
+ if (!*ven_data) {
+ err = -ENOMEM;
+ goto error;
+ }
+
+ /* supports only CVSD and mSBC offload codecs */
+ switch (codec->id) {
+ case 0x02:
+ **ven_data = 0x00;
+ break;
+ case 0x05:
+ **ven_data = 0x01;
+ break;
+ default:
+ err = -EINVAL;
+ bt_dev_err(hdev, "Invalid codec id(%u)", codec->id);
+ goto error;
+ }
+ /* codec and its capabilities are pre-defined to ids
+ * preset id = 0x00 represents CVSD codec with sampling rate 8K
+ * preset id = 0x01 represents mSBC codec with sampling rate 16K
+ */
+ *ven_len = sizeof(__u8);
+ return err;
+
+error:
+ kfree(*ven_data);
+ *ven_data = NULL;
+ return err;
+}
+
+static int btintel_get_data_path_id(struct hci_dev *hdev, __u8 *data_path_id)
+{
+ /* Intel uses 1 as data path id for all the usecases */
+ *data_path_id = 1;
+ return 0;
+}
+
+static int btintel_configure_offload(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ int err = 0;
+ struct intel_offload_use_cases *use_cases;
+
+ skb = __hci_cmd_sync(hdev, 0xfc86, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading offload use cases failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ if (skb->len < sizeof(*use_cases)) {
+ err = -EIO;
+ goto error;
+ }
+
+ use_cases = (void *)skb->data;
+
+ if (use_cases->status) {
+ err = -bt_to_errno(skb->data[0]);
+ goto error;
+ }
+
+ if (use_cases->preset[0] & 0x03) {
+ hdev->get_data_path_id = btintel_get_data_path_id;
+ hdev->get_codec_config_data = btintel_get_codec_config_data;
+ }
+error:
+ kfree_skb(skb);
+ return err;
+}
+
+static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,
+ struct intel_version_tlv *ver)
+{
+ u32 boot_param;
+ char ddcname[64];
+ int err;
+ struct intel_version_tlv new_ver;
+
+ bt_dev_dbg(hdev, "");
+
+ /* Set the default boot parameter to 0x0 and it is updated to
+ * SKU specific boot parameter after reading Intel_Write_Boot_Params
+ * command while downloading the firmware.
+ */
+ boot_param = 0x00000000;
+
+ btintel_set_flag(hdev, INTEL_BOOTLOADER);
+
+ err = btintel_prepare_fw_download_tlv(hdev, ver, &boot_param);
+ if (err)
+ return err;
+
+ /* check if controller is already having an operational firmware */
+ if (ver->img_type == 0x03)
+ goto finish;
+
+ err = btintel_boot(hdev, boot_param);
+ if (err)
+ return err;
+
+ btintel_clear_flag(hdev, INTEL_BOOTLOADER);
+
+ btintel_get_fw_name_tlv(ver, ddcname, sizeof(ddcname), "ddc");
+ /* Once the device is running in operational mode, it needs to
+ * apply the device configuration (DDC) parameters.
+ *
+ * The device can work without DDC parameters, so even if it
+ * fails to load the file, no need to fail the setup.
+ */
+ btintel_load_ddc_config(hdev, ddcname);
+
+ /* Read supported use cases and set callbacks to fetch datapath id */
+ btintel_configure_offload(hdev);
+
+ hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT);
+
+ /* Read the Intel version information after loading the FW */
+ err = btintel_read_version_tlv(hdev, &new_ver);
+ if (err)
+ return err;
+
+ btintel_version_info_tlv(hdev, &new_ver);
+
+finish:
+ /* Set the event mask for Intel specific vendor events. This enables
+ * a few extra events that are useful during general operation. It
+ * does not enable any debugging related events.
+ *
+ * The device will function correctly without these events enabled
+ * and thus no need to fail the setup.
+ */
+ btintel_set_event_mask(hdev, false);
+
+ return 0;
+}
+
+static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant)
+{
+ switch (hw_variant) {
+ /* Legacy bootloader devices that supports MSFT Extension */
+ case 0x11: /* JfP */
+ case 0x12: /* ThP */
+ case 0x13: /* HrP */
+ case 0x14: /* CcP */
+ /* All Intel new genration controllers support the Microsoft vendor
+ * extension are using 0xFC1E for VsMsftOpCode.
+ */
+ case 0x17:
+ case 0x18:
+ case 0x19:
+ case 0x1b:
+ hci_set_msft_opcode(hdev, 0xFC1E);
+ break;
+ default:
+ /* Not supported */
+ break;
+ }
+}
+
+static int btintel_setup_combined(struct hci_dev *hdev)
+{
+ const u8 param[1] = { 0xFF };
+ struct intel_version ver;
+ struct intel_version_tlv ver_tlv;
+ struct sk_buff *skb;
+ int err;
+
+ BT_DBG("%s", hdev->name);
+
+ /* The some controllers have a bug with the first HCI command sent to it
+ * returning number of completed commands as zero. This would stall the
+ * command processing in the Bluetooth core.
+ *
+ * As a workaround, send HCI Reset command first which will reset the
+ * number of completed commands and allow normal command processing
+ * from now on.
+ *
+ * Regarding the INTEL_BROKEN_SHUTDOWN_LED flag, these devices maybe
+ * in the SW_RFKILL ON state as a workaround of fixing LED issue during
+ * the shutdown() procedure, and once the device is in SW_RFKILL ON
+ * state, the only way to exit out of it is sending the HCI_Reset
+ * command.
+ */
+ if (btintel_test_flag(hdev, INTEL_BROKEN_INITIAL_NCMD) ||
+ btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) {
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL,
+ HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev,
+ "sending initial HCI reset failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+ }
+
+ /* Starting from TyP device, the command parameter and response are
+ * changed even though the OCF for HCI_Intel_Read_Version command
+ * remains same. The legacy devices can handle even if the
+ * command has a parameter and returns a correct version information.
+ * So, it uses new format to support both legacy and new format.
+ */
+ skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "Reading Intel version command failed (%ld)",
+ PTR_ERR(skb));
+ return PTR_ERR(skb);
+ }
+
+ /* Check the status */
+ if (skb->data[0]) {
+ bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
+ skb->data[0]);
+ err = -EIO;
+ goto exit_error;
+ }
+
+ /* Apply the common HCI quirks for Intel device */
+ set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
+ set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
+ set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
+
+ /* Set up the quality report callback for Intel devices */
+ hdev->set_quality_report = btintel_set_quality_report;
+
+ /* For Legacy device, check the HW platform value and size */
+ if (skb->len == sizeof(ver) && skb->data[1] == 0x37) {
+ bt_dev_dbg(hdev, "Read the legacy Intel version information");
+
+ memcpy(&ver, skb->data, sizeof(ver));
+
+ /* Display version information */
+ btintel_version_info(hdev, &ver);
+
+ /* Check for supported iBT hardware variants of this firmware
+ * loading method.
+ *
+ * This check has been put in place to ensure correct forward
+ * compatibility options when newer hardware variants come
+ * along.
+ */
+ switch (ver.hw_variant) {
+ case 0x07: /* WP */
+ case 0x08: /* StP */
+ /* Legacy ROM product */
+ btintel_set_flag(hdev, INTEL_ROM_LEGACY);
+
+ /* Apply the device specific HCI quirks
+ *
+ * WBS for SdP - For the Legacy ROM products, only SdP
+ * supports the WBS. But the version information is not
+ * enough to use here because the StP2 and SdP have same
+ * hw_variant and fw_variant. So, this flag is set by
+ * the transport driver (btusb) based on the HW info
+ * (idProduct)
+ */
+ if (!btintel_test_flag(hdev,
+ INTEL_ROM_LEGACY_NO_WBS_SUPPORT))
+ set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
+ &hdev->quirks);
+ if (ver.hw_variant == 0x08 && ver.fw_variant == 0x22)
+ set_bit(HCI_QUIRK_VALID_LE_STATES,
+ &hdev->quirks);
+
+ err = btintel_legacy_rom_setup(hdev, &ver);
+ break;
+ case 0x0b: /* SfP */
+ case 0x11: /* JfP */
+ case 0x12: /* ThP */
+ case 0x13: /* HrP */
+ case 0x14: /* CcP */
+ set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+ fallthrough;
+ case 0x0c: /* WsP */
+ /* Apply the device specific HCI quirks
+ *
+ * All Legacy bootloader devices support WBS
+ */
+ set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
+ &hdev->quirks);
+
+ /* Setup MSFT Extension support */
+ btintel_set_msft_opcode(hdev, ver.hw_variant);
+
+ err = btintel_bootloader_setup(hdev, &ver);
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
+ ver.hw_variant);
+ err = -EINVAL;
+ }
+
+ goto exit_error;
+ }
+
+ /* memset ver_tlv to start with clean state as few fields are exclusive
+ * to bootloader mode and are not populated in operational mode
+ */
+ memset(&ver_tlv, 0, sizeof(ver_tlv));
+ /* For TLV type device, parse the tlv data */
+ err = btintel_parse_version_tlv(hdev, &ver_tlv, skb);
+ if (err) {
+ bt_dev_err(hdev, "Failed to parse TLV version information");
+ goto exit_error;
+ }
+
+ if (INTEL_HW_PLATFORM(ver_tlv.cnvi_bt) != 0x37) {
+ bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
+ INTEL_HW_PLATFORM(ver_tlv.cnvi_bt));
+ err = -EINVAL;
+ goto exit_error;
+ }
+
+ /* Check for supported iBT hardware variants of this firmware
+ * loading method.
+ *
+ * This check has been put in place to ensure correct forward
+ * compatibility options when newer hardware variants come
+ * along.
+ */
+ switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) {
+ case 0x11: /* JfP */
+ case 0x12: /* ThP */
+ case 0x13: /* HrP */
+ case 0x14: /* CcP */
+ /* Some legacy bootloader devices starting from JfP,
+ * the operational firmware supports both old and TLV based
+ * HCI_Intel_Read_Version command based on the command
+ * parameter.
+ *
+ * For upgrading firmware case, the TLV based version cannot
+ * be used because the firmware filename for legacy bootloader
+ * is based on the old format.
+ *
+ * Also, it is not easy to convert TLV based version from the
+ * legacy version format.
+ *
+ * So, as a workaround for those devices, use the legacy
+ * HCI_Intel_Read_Version to get the version information and
+ * run the legacy bootloader setup.
+ */
+ err = btintel_read_version(hdev, &ver);
+ if (err)
+ break;
+
+ /* Apply the device specific HCI quirks
+ *
+ * All Legacy bootloader devices support WBS
+ */
+ set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+
+ /* Set Valid LE States quirk */
+ set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
+ /* Setup MSFT Extension support */
+ btintel_set_msft_opcode(hdev, ver.hw_variant);
+
+ err = btintel_bootloader_setup(hdev, &ver);
+ break;
+ case 0x17:
+ case 0x18:
+ case 0x19:
+ case 0x1b:
+ /* Display version information of TLV type */
+ btintel_version_info_tlv(hdev, &ver_tlv);
+
+ /* Apply the device specific HCI quirks for TLV based devices
+ *
+ * All TLV based devices support WBS
+ */
+ set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
+
+ /* Apply LE States quirk from solar onwards */
+ set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
+
+ /* Setup MSFT Extension support */
+ btintel_set_msft_opcode(hdev,
+ INTEL_HW_VARIANT(ver_tlv.cnvi_bt));
+
+ err = btintel_bootloader_setup_tlv(hdev, &ver_tlv);
+ break;
+ default:
+ bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
+ INTEL_HW_VARIANT(ver_tlv.cnvi_bt));
+ err = -EINVAL;
+ break;
+ }
+
+exit_error:
+ kfree_skb(skb);
+
+ return err;
+}
+
+static int btintel_shutdown_combined(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ int ret;
+
+ /* Send HCI Reset to the controller to stop any BT activity which
+ * were triggered. This will help to save power and maintain the
+ * sync b/w Host and controller
+ */
+ skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ bt_dev_err(hdev, "HCI reset during shutdown failed");
+ return PTR_ERR(skb);
+ }
+ kfree_skb(skb);
+
+
+ /* Some platforms have an issue with BT LED when the interface is
+ * down or BT radio is turned off, which takes 5 seconds to BT LED
+ * goes off. As a workaround, sends HCI_Intel_SW_RFKILL to put the
+ * device in the RFKILL ON state which turns off the BT LED immediately.
+ */
+ if (btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) {
+ skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
+ if (IS_ERR(skb)) {
+ ret = PTR_ERR(skb);
+ bt_dev_err(hdev, "turning off Intel device LED failed");
+ return ret;
+ }
+ kfree_skb(skb);
+ }
+
+ return 0;
+}
+
+int btintel_configure_setup(struct hci_dev *hdev)
+{
+ hdev->manufacturer = 2;
+ hdev->setup = btintel_setup_combined;
+ hdev->shutdown = btintel_shutdown_combined;
+ hdev->hw_error = btintel_hw_error;
+ hdev->set_diag = btintel_set_diag_combined;
+ hdev->set_bdaddr = btintel_set_bdaddr;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btintel_configure_setup);
+
+void btintel_bootup(struct hci_dev *hdev, const void *ptr, unsigned int len)
+{
+ const struct intel_bootup *evt = ptr;
+
+ if (len != sizeof(*evt))
+ return;
+
+ if (btintel_test_and_clear_flag(hdev, INTEL_BOOTING))
+ btintel_wake_up_flag(hdev, INTEL_BOOTING);
+}
+EXPORT_SYMBOL_GPL(btintel_bootup);
+
+void btintel_secure_send_result(struct hci_dev *hdev,
+ const void *ptr, unsigned int len)
+{
+ const struct intel_secure_send_result *evt = ptr;
+
+ if (len != sizeof(*evt))
+ return;
+
+ if (evt->result)
+ btintel_set_flag(hdev, INTEL_FIRMWARE_FAILED);
+
+ if (btintel_test_and_clear_flag(hdev, INTEL_DOWNLOADING) &&
+ btintel_test_flag(hdev, INTEL_FIRMWARE_LOADED))
+ btintel_wake_up_flag(hdev, INTEL_DOWNLOADING);
+}
+EXPORT_SYMBOL_GPL(btintel_secure_send_result);
+
+MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
+MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
+MODULE_VERSION(VERSION);
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("intel/ibt-11-5.sfi");
+MODULE_FIRMWARE("intel/ibt-11-5.ddc");
+MODULE_FIRMWARE("intel/ibt-12-16.sfi");
+MODULE_FIRMWARE("intel/ibt-12-16.ddc");