Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

25 files changed, 5389 insertions, 0 deletions

diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig
new file mode 100644
index 000000000..557d62137
--- /dev/null
+++ b/drivers/clk/mvebu/Kconfig
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MVEBU_CLK_COMMON
+	bool
+
+config MVEBU_CLK_CPU
+	bool
+
+config MVEBU_CLK_COREDIV
+	bool
+
+config ARMADA_AP_CP_HELPER
+	bool
+
+config ARMADA_370_CLK
+	bool
+	select MVEBU_CLK_COMMON
+	select MVEBU_CLK_CPU
+
+config ARMADA_375_CLK
+	bool
+	select MVEBU_CLK_COMMON
+
+config ARMADA_38X_CLK
+	bool
+	select MVEBU_CLK_COMMON
+
+config ARMADA_39X_CLK
+	bool
+	select MVEBU_CLK_COMMON
+
+config ARMADA_37XX_CLK
+	bool
+
+config ARMADA_XP_CLK
+	bool
+	select MVEBU_CLK_COMMON
+	select MVEBU_CLK_CPU
+
+config ARMADA_AP806_SYSCON
+	bool
+	select ARMADA_AP_CP_HELPER
+
+config ARMADA_AP_CPU_CLK
+	bool
+	select ARMADA_AP_CP_HELPER
+
+config ARMADA_CP110_SYSCON
+	bool
+	select ARMADA_AP_CP_HELPER
+
+config DOVE_CLK
+	bool
+	select MVEBU_CLK_COMMON
+
+config KIRKWOOD_CLK
+	bool
+	select MVEBU_CLK_COMMON
+
+config ORION_CLK
+	bool
+	select MVEBU_CLK_COMMON
diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile
new file mode 100644
index 000000000..04464cef0
--- /dev/null
+++ b/drivers/clk/mvebu/Makefile
@@ -0,0 +1,20 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_MVEBU_CLK_COMMON)	+= common.o
+obj-$(CONFIG_MVEBU_CLK_CPU) 	+= clk-cpu.o
+obj-$(CONFIG_MVEBU_CLK_COREDIV)	+= clk-corediv.o
+obj-$(CONFIG_ARMADA_AP_CP_HELPER) += armada_ap_cp_helper.o
+
+obj-$(CONFIG_ARMADA_370_CLK)	+= armada-370.o
+obj-$(CONFIG_ARMADA_375_CLK)	+= armada-375.o
+obj-$(CONFIG_ARMADA_38X_CLK)	+= armada-38x.o
+obj-$(CONFIG_ARMADA_39X_CLK)	+= armada-39x.o
+obj-$(CONFIG_ARMADA_37XX_CLK)	+= armada-37xx-xtal.o
+obj-$(CONFIG_ARMADA_37XX_CLK)	+= armada-37xx-tbg.o
+obj-$(CONFIG_ARMADA_37XX_CLK)	+= armada-37xx-periph.o
+obj-$(CONFIG_ARMADA_XP_CLK)	+= armada-xp.o mv98dx3236.o
+obj-$(CONFIG_ARMADA_AP806_SYSCON) += ap806-system-controller.o
+obj-$(CONFIG_ARMADA_AP_CPU_CLK) += ap-cpu-clk.o
+obj-$(CONFIG_ARMADA_CP110_SYSCON) += cp110-system-controller.o
+obj-$(CONFIG_DOVE_CLK)		+= dove.o dove-divider.o
+obj-$(CONFIG_KIRKWOOD_CLK)	+= kirkwood.o
+obj-$(CONFIG_ORION_CLK)		+= orion.o
diff --git a/drivers/clk/mvebu/ap-cpu-clk.c b/drivers/clk/mvebu/ap-cpu-clk.c
new file mode 100644
index 000000000..71bdd7c3f
--- /dev/null
+++ b/drivers/clk/mvebu/ap-cpu-clk.c
@@ -0,0 +1,364 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Marvell Armada AP CPU Clock Controller
+ *
+ * Copyright (C) 2018 Marvell
+ *
+ * Omri Itach <omrii@marvell.com>
+ * Gregory Clement <gregory.clement@bootlin.com>
+ */
+
+#define pr_fmt(fmt) "ap-cpu-clk: " fmt
+
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include "armada_ap_cp_helper.h"
+
+#define AP806_CPU_CLUSTER0		0
+#define AP806_CPU_CLUSTER1		1
+#define AP806_CPUS_PER_CLUSTER		2
+#define APN806_CPU1_MASK		0x1
+
+#define APN806_CLUSTER_NUM_OFFSET	8
+#define APN806_CLUSTER_NUM_MASK		BIT(APN806_CLUSTER_NUM_OFFSET)
+
+#define APN806_MAX_DIVIDER		32
+
+/*
+ * struct cpu_dfs_regs: CPU DFS register mapping
+ * @divider_reg: full integer ratio from PLL frequency to CPU clock frequency
+ * @force_reg: request to force new ratio regardless of relation to other clocks
+ * @ratio_reg: central request to switch ratios
+ */
+struct cpu_dfs_regs {
+	unsigned int divider_reg;
+	unsigned int force_reg;
+	unsigned int ratio_reg;
+	unsigned int ratio_state_reg;
+	unsigned int divider_mask;
+	unsigned int cluster_offset;
+	unsigned int force_mask;
+	int divider_offset;
+	int divider_ratio;
+	int ratio_offset;
+	int ratio_state_offset;
+	int ratio_state_cluster_offset;
+};
+
+/* AP806 CPU DFS register mapping*/
+#define AP806_CA72MP2_0_PLL_CR_0_REG_OFFSET		0x278
+#define AP806_CA72MP2_0_PLL_CR_1_REG_OFFSET		0x280
+#define AP806_CA72MP2_0_PLL_CR_2_REG_OFFSET		0x284
+#define AP806_CA72MP2_0_PLL_SR_REG_OFFSET		0xC94
+
+#define AP806_CA72MP2_0_PLL_CR_CLUSTER_OFFSET		0x14
+#define AP806_PLL_CR_0_CPU_CLK_DIV_RATIO_OFFSET		0
+#define AP806_PLL_CR_CPU_CLK_DIV_RATIO			0
+#define AP806_PLL_CR_0_CPU_CLK_DIV_RATIO_MASK \
+			(0x3f << AP806_PLL_CR_0_CPU_CLK_DIV_RATIO_OFFSET)
+#define AP806_PLL_CR_0_CPU_CLK_RELOAD_FORCE_OFFSET	24
+#define AP806_PLL_CR_0_CPU_CLK_RELOAD_FORCE_MASK \
+			(0x1 << AP806_PLL_CR_0_CPU_CLK_RELOAD_FORCE_OFFSET)
+#define AP806_PLL_CR_0_CPU_CLK_RELOAD_RATIO_OFFSET	16
+#define AP806_CA72MP2_0_PLL_RATIO_STABLE_OFFSET	0
+#define AP806_CA72MP2_0_PLL_RATIO_STATE			11
+
+#define STATUS_POLL_PERIOD_US		1
+#define STATUS_POLL_TIMEOUT_US		1000000
+
+#define to_ap_cpu_clk(_hw) container_of(_hw, struct ap_cpu_clk, hw)
+
+static const struct cpu_dfs_regs ap806_dfs_regs = {
+	.divider_reg = AP806_CA72MP2_0_PLL_CR_0_REG_OFFSET,
+	.force_reg = AP806_CA72MP2_0_PLL_CR_1_REG_OFFSET,
+	.ratio_reg = AP806_CA72MP2_0_PLL_CR_2_REG_OFFSET,
+	.ratio_state_reg = AP806_CA72MP2_0_PLL_SR_REG_OFFSET,
+	.divider_mask = AP806_PLL_CR_0_CPU_CLK_DIV_RATIO_MASK,
+	.cluster_offset = AP806_CA72MP2_0_PLL_CR_CLUSTER_OFFSET,
+	.force_mask = AP806_PLL_CR_0_CPU_CLK_RELOAD_FORCE_MASK,
+	.divider_offset = AP806_PLL_CR_0_CPU_CLK_DIV_RATIO_OFFSET,
+	.divider_ratio = AP806_PLL_CR_CPU_CLK_DIV_RATIO,
+	.ratio_offset = AP806_PLL_CR_0_CPU_CLK_RELOAD_RATIO_OFFSET,
+	.ratio_state_offset = AP806_CA72MP2_0_PLL_RATIO_STABLE_OFFSET,
+	.ratio_state_cluster_offset = AP806_CA72MP2_0_PLL_RATIO_STABLE_OFFSET,
+};
+
+/* AP807 CPU DFS register mapping */
+#define AP807_DEVICE_GENERAL_CONTROL_10_REG_OFFSET		0x278
+#define AP807_DEVICE_GENERAL_CONTROL_11_REG_OFFSET		0x27c
+#define AP807_DEVICE_GENERAL_STATUS_6_REG_OFFSET		0xc98
+#define AP807_CA72MP2_0_PLL_CR_CLUSTER_OFFSET			0x8
+#define AP807_PLL_CR_0_CPU_CLK_DIV_RATIO_OFFSET			18
+#define AP807_PLL_CR_0_CPU_CLK_DIV_RATIO_MASK \
+		(0x3f << AP807_PLL_CR_0_CPU_CLK_DIV_RATIO_OFFSET)
+#define AP807_PLL_CR_1_CPU_CLK_DIV_RATIO_OFFSET			12
+#define AP807_PLL_CR_1_CPU_CLK_DIV_RATIO_MASK \
+		(0x3f << AP807_PLL_CR_1_CPU_CLK_DIV_RATIO_OFFSET)
+#define AP807_PLL_CR_CPU_CLK_DIV_RATIO				3
+#define AP807_PLL_CR_0_CPU_CLK_RELOAD_FORCE_OFFSET		0
+#define AP807_PLL_CR_0_CPU_CLK_RELOAD_FORCE_MASK \
+		(0x3 << AP807_PLL_CR_0_CPU_CLK_RELOAD_FORCE_OFFSET)
+#define AP807_PLL_CR_0_CPU_CLK_RELOAD_RATIO_OFFSET		6
+#define	AP807_CA72MP2_0_PLL_CLKDIV_RATIO_STABLE_OFFSET		20
+#define AP807_CA72MP2_0_PLL_CLKDIV_RATIO_STABLE_CLUSTER_OFFSET	3
+
+static const struct cpu_dfs_regs ap807_dfs_regs = {
+	.divider_reg = AP807_DEVICE_GENERAL_CONTROL_10_REG_OFFSET,
+	.force_reg = AP807_DEVICE_GENERAL_CONTROL_11_REG_OFFSET,
+	.ratio_reg = AP807_DEVICE_GENERAL_CONTROL_11_REG_OFFSET,
+	.ratio_state_reg = AP807_DEVICE_GENERAL_STATUS_6_REG_OFFSET,
+	.divider_mask = AP807_PLL_CR_0_CPU_CLK_DIV_RATIO_MASK,
+	.cluster_offset = AP807_CA72MP2_0_PLL_CR_CLUSTER_OFFSET,
+	.force_mask = AP807_PLL_CR_0_CPU_CLK_RELOAD_FORCE_MASK,
+	.divider_offset = AP807_PLL_CR_0_CPU_CLK_DIV_RATIO_OFFSET,
+	.divider_ratio = AP807_PLL_CR_CPU_CLK_DIV_RATIO,
+	.ratio_offset = AP807_PLL_CR_0_CPU_CLK_RELOAD_RATIO_OFFSET,
+	.ratio_state_offset = AP807_CA72MP2_0_PLL_CLKDIV_RATIO_STABLE_OFFSET,
+	.ratio_state_cluster_offset =
+		AP807_CA72MP2_0_PLL_CLKDIV_RATIO_STABLE_CLUSTER_OFFSET
+};
+
+/*
+ * struct ap806_clk: CPU cluster clock controller instance
+ * @cluster: Cluster clock controller index
+ * @clk_name: Cluster clock controller name
+ * @dev : Cluster clock device
+ * @hw: HW specific structure of Cluster clock controller
+ * @pll_cr_base: CA72MP2 Register base (Device Sample at Reset register)
+ */
+struct ap_cpu_clk {
+	unsigned int cluster;
+	const char *clk_name;
+	struct device *dev;
+	struct clk_hw hw;
+	struct regmap *pll_cr_base;
+	const struct cpu_dfs_regs *pll_regs;
+};
+
+static unsigned long ap_cpu_clk_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct ap_cpu_clk *clk = to_ap_cpu_clk(hw);
+	unsigned int cpu_clkdiv_reg;
+	int cpu_clkdiv_ratio;
+
+	cpu_clkdiv_reg = clk->pll_regs->divider_reg +
+		(clk->cluster * clk->pll_regs->cluster_offset);
+	regmap_read(clk->pll_cr_base, cpu_clkdiv_reg, &cpu_clkdiv_ratio);
+	cpu_clkdiv_ratio &= clk->pll_regs->divider_mask;
+	cpu_clkdiv_ratio >>= clk->pll_regs->divider_offset;
+
+	return parent_rate / cpu_clkdiv_ratio;
+}
+
+static int ap_cpu_clk_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct ap_cpu_clk *clk = to_ap_cpu_clk(hw);
+	int ret, reg, divider = parent_rate / rate;
+	unsigned int cpu_clkdiv_reg, cpu_force_reg, cpu_ratio_reg, stable_bit;
+
+	cpu_clkdiv_reg = clk->pll_regs->divider_reg +
+		(clk->cluster * clk->pll_regs->cluster_offset);
+	cpu_force_reg = clk->pll_regs->force_reg +
+		(clk->cluster * clk->pll_regs->cluster_offset);
+	cpu_ratio_reg = clk->pll_regs->ratio_reg +
+		(clk->cluster * clk->pll_regs->cluster_offset);
+
+	regmap_read(clk->pll_cr_base, cpu_clkdiv_reg, &reg);
+	reg &= ~(clk->pll_regs->divider_mask);
+	reg |= (divider << clk->pll_regs->divider_offset);
+
+	/*
+	 * AP807 CPU divider has two channels with ratio 1:3 and divider_ratio
+	 * is 1. Otherwise, in the case of the AP806, divider_ratio is 0.
+	 */
+	if (clk->pll_regs->divider_ratio) {
+		reg &= ~(AP807_PLL_CR_1_CPU_CLK_DIV_RATIO_MASK);
+		reg |= ((divider * clk->pll_regs->divider_ratio) <<
+				AP807_PLL_CR_1_CPU_CLK_DIV_RATIO_OFFSET);
+	}
+	regmap_write(clk->pll_cr_base, cpu_clkdiv_reg, reg);
+
+
+	regmap_update_bits(clk->pll_cr_base, cpu_force_reg,
+			   clk->pll_regs->force_mask,
+			   clk->pll_regs->force_mask);
+
+	regmap_update_bits(clk->pll_cr_base, cpu_ratio_reg,
+			   BIT(clk->pll_regs->ratio_offset),
+			   BIT(clk->pll_regs->ratio_offset));
+
+	stable_bit = BIT(clk->pll_regs->ratio_state_offset +
+			 clk->cluster *
+			 clk->pll_regs->ratio_state_cluster_offset);
+	ret = regmap_read_poll_timeout(clk->pll_cr_base,
+				       clk->pll_regs->ratio_state_reg, reg,
+				       reg & stable_bit, STATUS_POLL_PERIOD_US,
+				       STATUS_POLL_TIMEOUT_US);
+	if (ret)
+		return ret;
+
+	regmap_update_bits(clk->pll_cr_base, cpu_ratio_reg,
+			   BIT(clk->pll_regs->ratio_offset), 0);
+
+	return 0;
+}
+
+static long ap_cpu_clk_round_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *parent_rate)
+{
+	int divider = *parent_rate / rate;
+
+	divider = min(divider, APN806_MAX_DIVIDER);
+
+	return *parent_rate / divider;
+}
+
+static const struct clk_ops ap_cpu_clk_ops = {
+	.recalc_rate	= ap_cpu_clk_recalc_rate,
+	.round_rate	= ap_cpu_clk_round_rate,
+	.set_rate	= ap_cpu_clk_set_rate,
+};
+
+static int ap_cpu_clock_probe(struct platform_device *pdev)
+{
+	int ret, nclusters = 0, cluster_index = 0;
+	struct device *dev = &pdev->dev;
+	struct device_node *dn, *np = dev->of_node;
+	struct clk_hw_onecell_data *ap_cpu_data;
+	struct ap_cpu_clk *ap_cpu_clk;
+	struct regmap *regmap;
+
+	regmap = syscon_node_to_regmap(np->parent);
+	if (IS_ERR(regmap)) {
+		pr_err("cannot get pll_cr_base regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	/*
+	 * AP806 has 4 cpus and DFS for AP806 is controlled per
+	 * cluster (2 CPUs per cluster), cpu0 and cpu1 are fixed to
+	 * cluster0 while cpu2 and cpu3 are fixed to cluster1 whether
+	 * they are enabled or not.  Since cpu0 is the boot cpu, then
+	 * cluster0 must exist.  If cpu2 or cpu3 is enabled, cluster1
+	 * will exist and the cluster number is 2; otherwise the
+	 * cluster number is 1.
+	 */
+	nclusters = 1;
+	for_each_of_cpu_node(dn) {
+		int cpu, err;
+
+		err = of_property_read_u32(dn, "reg", &cpu);
+		if (WARN_ON(err)) {
+			of_node_put(dn);
+			return err;
+		}
+
+		/* If cpu2 or cpu3 is enabled */
+		if (cpu & APN806_CLUSTER_NUM_MASK) {
+			nclusters = 2;
+			of_node_put(dn);
+			break;
+		}
+	}
+	/*
+	 * DFS for AP806 is controlled per cluster (2 CPUs per cluster),
+	 * so allocate structs per cluster
+	 */
+	ap_cpu_clk = devm_kcalloc(dev, nclusters, sizeof(*ap_cpu_clk),
+				  GFP_KERNEL);
+	if (!ap_cpu_clk)
+		return -ENOMEM;
+
+	ap_cpu_data = devm_kzalloc(dev, struct_size(ap_cpu_data, hws,
+						    nclusters),
+				GFP_KERNEL);
+	if (!ap_cpu_data)
+		return -ENOMEM;
+
+	for_each_of_cpu_node(dn) {
+		char *clk_name = "cpu-cluster-0";
+		struct clk_init_data init;
+		const char *parent_name;
+		struct clk *parent;
+		int cpu, err;
+
+		err = of_property_read_u32(dn, "reg", &cpu);
+		if (WARN_ON(err)) {
+			of_node_put(dn);
+			return err;
+		}
+
+		cluster_index = cpu & APN806_CLUSTER_NUM_MASK;
+		cluster_index >>= APN806_CLUSTER_NUM_OFFSET;
+
+		/* Initialize once for one cluster */
+		if (ap_cpu_data->hws[cluster_index])
+			continue;
+
+		parent = of_clk_get(np, cluster_index);
+		if (IS_ERR(parent)) {
+			dev_err(dev, "Could not get the clock parent\n");
+			of_node_put(dn);
+			return -EINVAL;
+		}
+		parent_name =  __clk_get_name(parent);
+		clk_name[12] += cluster_index;
+		ap_cpu_clk[cluster_index].clk_name =
+			ap_cp_unique_name(dev, np->parent, clk_name);
+		ap_cpu_clk[cluster_index].cluster = cluster_index;
+		ap_cpu_clk[cluster_index].pll_cr_base = regmap;
+		ap_cpu_clk[cluster_index].hw.init = &init;
+		ap_cpu_clk[cluster_index].dev = dev;
+		ap_cpu_clk[cluster_index].pll_regs = of_device_get_match_data(&pdev->dev);
+
+		init.name = ap_cpu_clk[cluster_index].clk_name;
+		init.ops = &ap_cpu_clk_ops;
+		init.num_parents = 1;
+		init.parent_names = &parent_name;
+
+		ret = devm_clk_hw_register(dev, &ap_cpu_clk[cluster_index].hw);
+		if (ret) {
+			of_node_put(dn);
+			return ret;
+		}
+		ap_cpu_data->hws[cluster_index] = &ap_cpu_clk[cluster_index].hw;
+	}
+
+	ap_cpu_data->num = cluster_index + 1;
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, ap_cpu_data);
+	if (ret)
+		dev_err(dev, "failed to register OF clock provider\n");
+
+	return ret;
+}
+
+static const struct of_device_id ap_cpu_clock_of_match[] = {
+	{
+		.compatible = "marvell,ap806-cpu-clock",
+		.data = &ap806_dfs_regs,
+	},
+	{
+		.compatible = "marvell,ap807-cpu-clock",
+		.data = &ap807_dfs_regs,
+	},
+	{ }
+};
+
+static struct platform_driver ap_cpu_clock_driver = {
+	.probe = ap_cpu_clock_probe,
+	.driver		= {
+		.name	= "marvell-ap-cpu-clock",
+		.of_match_table = ap_cpu_clock_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(ap_cpu_clock_driver);
diff --git a/drivers/clk/mvebu/ap806-system-controller.c b/drivers/clk/mvebu/ap806-system-controller.c
new file mode 100644
index 000000000..948bd1e71
--- /dev/null
+++ b/drivers/clk/mvebu/ap806-system-controller.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Armada AP806 System Controller
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+#define pr_fmt(fmt) "ap806-system-controller: " fmt
+
+#include "armada_ap_cp_helper.h"
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define AP806_SAR_REG			0x400
+#define AP806_SAR_CLKFREQ_MODE_MASK	0x1f
+
+#define AP806_CLK_NUM			6
+
+static struct clk *ap806_clks[AP806_CLK_NUM];
+
+static struct clk_onecell_data ap806_clk_data = {
+	.clks = ap806_clks,
+	.clk_num = AP806_CLK_NUM,
+};
+
+static int ap806_get_sar_clocks(unsigned int freq_mode,
+				unsigned int *cpuclk_freq,
+				unsigned int *dclk_freq)
+{
+	switch (freq_mode) {
+	case 0x0:
+		*cpuclk_freq = 2000;
+		*dclk_freq = 600;
+		break;
+	case 0x1:
+		*cpuclk_freq = 2000;
+		*dclk_freq = 525;
+		break;
+	case 0x6:
+		*cpuclk_freq = 1800;
+		*dclk_freq = 600;
+		break;
+	case 0x7:
+		*cpuclk_freq = 1800;
+		*dclk_freq = 525;
+		break;
+	case 0x4:
+		*cpuclk_freq = 1600;
+		*dclk_freq = 400;
+		break;
+	case 0xB:
+		*cpuclk_freq = 1600;
+		*dclk_freq = 450;
+		break;
+	case 0xD:
+		*cpuclk_freq = 1600;
+		*dclk_freq = 525;
+		break;
+	case 0x1a:
+		*cpuclk_freq = 1400;
+		*dclk_freq = 400;
+		break;
+	case 0x14:
+		*cpuclk_freq = 1300;
+		*dclk_freq = 400;
+		break;
+	case 0x17:
+		*cpuclk_freq = 1300;
+		*dclk_freq = 325;
+		break;
+	case 0x19:
+		*cpuclk_freq = 1200;
+		*dclk_freq = 400;
+		break;
+	case 0x13:
+		*cpuclk_freq = 1000;
+		*dclk_freq = 325;
+		break;
+	case 0x1d:
+		*cpuclk_freq = 1000;
+		*dclk_freq = 400;
+		break;
+	case 0x1c:
+		*cpuclk_freq = 800;
+		*dclk_freq = 400;
+		break;
+	case 0x1b:
+		*cpuclk_freq = 600;
+		*dclk_freq = 400;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ap807_get_sar_clocks(unsigned int freq_mode,
+				unsigned int *cpuclk_freq,
+				unsigned int *dclk_freq)
+{
+	switch (freq_mode) {
+	case 0x0:
+		*cpuclk_freq = 2000;
+		*dclk_freq = 1200;
+		break;
+	case 0x6:
+		*cpuclk_freq = 2200;
+		*dclk_freq = 1200;
+		break;
+	case 0xD:
+		*cpuclk_freq = 1600;
+		*dclk_freq = 1200;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int ap806_syscon_common_probe(struct platform_device *pdev,
+				     struct device_node *syscon_node)
+{
+	unsigned int freq_mode, cpuclk_freq, dclk_freq;
+	const char *name, *fixedclk_name;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct regmap *regmap;
+	u32 reg;
+	int ret;
+
+	regmap = syscon_node_to_regmap(syscon_node);
+	if (IS_ERR(regmap)) {
+		dev_err(dev, "cannot get regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	ret = regmap_read(regmap, AP806_SAR_REG, &reg);
+	if (ret) {
+		dev_err(dev, "cannot read from regmap\n");
+		return ret;
+	}
+
+	freq_mode = reg & AP806_SAR_CLKFREQ_MODE_MASK;
+
+	if (of_device_is_compatible(pdev->dev.of_node,
+				    "marvell,ap806-clock")) {
+		ret = ap806_get_sar_clocks(freq_mode, &cpuclk_freq, &dclk_freq);
+	} else if (of_device_is_compatible(pdev->dev.of_node,
+					   "marvell,ap807-clock")) {
+		ret = ap807_get_sar_clocks(freq_mode, &cpuclk_freq, &dclk_freq);
+	} else {
+		dev_err(dev, "compatible not supported\n");
+		return -EINVAL;
+	}
+
+	if (ret) {
+		dev_err(dev, "invalid Sample at Reset value\n");
+		return ret;
+	}
+
+	/* Convert to hertz */
+	cpuclk_freq *= 1000 * 1000;
+	dclk_freq *= 1000 * 1000;
+
+	/* CPU clocks depend on the Sample At Reset configuration */
+	name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-0");
+	ap806_clks[0] = clk_register_fixed_rate(dev, name, NULL,
+						0, cpuclk_freq);
+	if (IS_ERR(ap806_clks[0])) {
+		ret = PTR_ERR(ap806_clks[0]);
+		goto fail0;
+	}
+
+	name = ap_cp_unique_name(dev, syscon_node, "pll-cluster-1");
+	ap806_clks[1] = clk_register_fixed_rate(dev, name, NULL, 0,
+						cpuclk_freq);
+	if (IS_ERR(ap806_clks[1])) {
+		ret = PTR_ERR(ap806_clks[1]);
+		goto fail1;
+	}
+
+	/* Fixed clock is always 1200 Mhz */
+	fixedclk_name = ap_cp_unique_name(dev, syscon_node, "fixed");
+	ap806_clks[2] = clk_register_fixed_rate(dev, fixedclk_name, NULL,
+						0, 1200 * 1000 * 1000);
+	if (IS_ERR(ap806_clks[2])) {
+		ret = PTR_ERR(ap806_clks[2]);
+		goto fail2;
+	}
+
+	/* MSS Clock is fixed clock divided by 6 */
+	name = ap_cp_unique_name(dev, syscon_node, "mss");
+	ap806_clks[3] = clk_register_fixed_factor(NULL, name, fixedclk_name,
+						  0, 1, 6);
+	if (IS_ERR(ap806_clks[3])) {
+		ret = PTR_ERR(ap806_clks[3]);
+		goto fail3;
+	}
+
+	/* SDIO(/eMMC) Clock is fixed clock divided by 3 */
+	name = ap_cp_unique_name(dev, syscon_node, "sdio");
+	ap806_clks[4] = clk_register_fixed_factor(NULL, name,
+						  fixedclk_name,
+						  0, 1, 3);
+	if (IS_ERR(ap806_clks[4])) {
+		ret = PTR_ERR(ap806_clks[4]);
+		goto fail4;
+	}
+
+	/* AP-DCLK(HCLK) Clock is DDR clock divided by 2 */
+	name = ap_cp_unique_name(dev, syscon_node, "ap-dclk");
+	ap806_clks[5] = clk_register_fixed_rate(dev, name, NULL, 0, dclk_freq);
+	if (IS_ERR(ap806_clks[5])) {
+		ret = PTR_ERR(ap806_clks[5]);
+		goto fail5;
+	}
+
+	ret = of_clk_add_provider(np, of_clk_src_onecell_get, &ap806_clk_data);
+	if (ret)
+		goto fail_clk_add;
+
+	return 0;
+
+fail_clk_add:
+	clk_unregister_fixed_factor(ap806_clks[5]);
+fail5:
+	clk_unregister_fixed_factor(ap806_clks[4]);
+fail4:
+	clk_unregister_fixed_factor(ap806_clks[3]);
+fail3:
+	clk_unregister_fixed_rate(ap806_clks[2]);
+fail2:
+	clk_unregister_fixed_rate(ap806_clks[1]);
+fail1:
+	clk_unregister_fixed_rate(ap806_clks[0]);
+fail0:
+	return ret;
+}
+
+static int ap806_syscon_legacy_probe(struct platform_device *pdev)
+{
+	dev_warn(&pdev->dev, FW_WARN "Using legacy device tree binding\n");
+	dev_warn(&pdev->dev, FW_WARN "Update your device tree:\n");
+	dev_warn(&pdev->dev, FW_WARN
+		 "This binding won't be supported in future kernel\n");
+
+	return ap806_syscon_common_probe(pdev, pdev->dev.of_node);
+
+}
+
+static int ap806_clock_probe(struct platform_device *pdev)
+{
+	return ap806_syscon_common_probe(pdev, pdev->dev.of_node->parent);
+}
+
+static const struct of_device_id ap806_syscon_legacy_of_match[] = {
+	{ .compatible = "marvell,ap806-system-controller", },
+	{ }
+};
+
+static struct platform_driver ap806_syscon_legacy_driver = {
+	.probe = ap806_syscon_legacy_probe,
+	.driver		= {
+		.name	= "marvell-ap806-system-controller",
+		.of_match_table = ap806_syscon_legacy_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(ap806_syscon_legacy_driver);
+
+static const struct of_device_id ap806_clock_of_match[] = {
+	{ .compatible = "marvell,ap806-clock", },
+	{ .compatible = "marvell,ap807-clock", },
+	{ }
+};
+
+static struct platform_driver ap806_clock_driver = {
+	.probe = ap806_clock_probe,
+	.driver		= {
+		.name	= "marvell-ap806-clock",
+		.of_match_table = ap806_clock_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(ap806_clock_driver);
diff --git a/drivers/clk/mvebu/armada-370.c b/drivers/clk/mvebu/armada-370.c
new file mode 100644
index 000000000..5c6bbee39
--- /dev/null
+++ b/drivers/clk/mvebu/armada-370.c
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Armada 370 SoC clocks
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include "common.h"
+
+/*
+ * Core Clocks
+ */
+
+#define SARL				0	/* Low part [0:31] */
+#define	 SARL_A370_SSCG_ENABLE		BIT(10)
+#define	 SARL_A370_PCLK_FREQ_OPT	11
+#define	 SARL_A370_PCLK_FREQ_OPT_MASK	0xF
+#define	 SARL_A370_FAB_FREQ_OPT		15
+#define	 SARL_A370_FAB_FREQ_OPT_MASK	0x1F
+#define	 SARL_A370_TCLK_FREQ_OPT	20
+#define	 SARL_A370_TCLK_FREQ_OPT_MASK	0x1
+
+enum { A370_CPU_TO_NBCLK, A370_CPU_TO_HCLK, A370_CPU_TO_DRAMCLK };
+
+static const struct coreclk_ratio a370_coreclk_ratios[] __initconst = {
+	{ .id = A370_CPU_TO_NBCLK, .name = "nbclk" },
+	{ .id = A370_CPU_TO_HCLK, .name = "hclk" },
+	{ .id = A370_CPU_TO_DRAMCLK, .name = "dramclk" },
+};
+
+static const u32 a370_tclk_freqs[] __initconst = {
+	166000000,
+	200000000,
+};
+
+static u32 __init a370_get_tclk_freq(void __iomem *sar)
+{
+	u8 tclk_freq_select = 0;
+
+	tclk_freq_select = ((readl(sar) >> SARL_A370_TCLK_FREQ_OPT) &
+			    SARL_A370_TCLK_FREQ_OPT_MASK);
+	return a370_tclk_freqs[tclk_freq_select];
+}
+
+static const u32 a370_cpu_freqs[] __initconst = {
+	400000000,
+	533000000,
+	667000000,
+	800000000,
+	1000000000,
+	1067000000,
+	1200000000,
+};
+
+static u32 __init a370_get_cpu_freq(void __iomem *sar)
+{
+	u32 cpu_freq;
+	u8 cpu_freq_select = 0;
+
+	cpu_freq_select = ((readl(sar) >> SARL_A370_PCLK_FREQ_OPT) &
+			   SARL_A370_PCLK_FREQ_OPT_MASK);
+	if (cpu_freq_select >= ARRAY_SIZE(a370_cpu_freqs)) {
+		pr_err("CPU freq select unsupported %d\n", cpu_freq_select);
+		cpu_freq = 0;
+	} else
+		cpu_freq = a370_cpu_freqs[cpu_freq_select];
+
+	return cpu_freq;
+}
+
+static const int a370_nbclk_ratios[32][2] __initconst = {
+	{0, 1}, {1, 2}, {2, 2}, {2, 2},
+	{1, 2}, {1, 2}, {1, 1}, {2, 3},
+	{0, 1}, {1, 2}, {2, 4}, {0, 1},
+	{1, 2}, {0, 1}, {0, 1}, {2, 2},
+	{0, 1}, {0, 1}, {0, 1}, {1, 1},
+	{2, 3}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {1, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static const int a370_hclk_ratios[32][2] __initconst = {
+	{0, 1}, {1, 2}, {2, 6}, {2, 3},
+	{1, 3}, {1, 4}, {1, 2}, {2, 6},
+	{0, 1}, {1, 6}, {2, 10}, {0, 1},
+	{1, 4}, {0, 1}, {0, 1}, {2, 5},
+	{0, 1}, {0, 1}, {0, 1}, {1, 2},
+	{2, 6}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {1, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static const int a370_dramclk_ratios[32][2] __initconst = {
+	{0, 1}, {1, 2}, {2, 3}, {2, 3},
+	{1, 3}, {1, 2}, {1, 2}, {2, 6},
+	{0, 1}, {1, 3}, {2, 5}, {0, 1},
+	{1, 4}, {0, 1}, {0, 1}, {2, 5},
+	{0, 1}, {0, 1}, {0, 1}, {1, 1},
+	{2, 3}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {1, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static void __init a370_get_clk_ratio(
+	void __iomem *sar, int id, int *mult, int *div)
+{
+	u32 opt = ((readl(sar) >> SARL_A370_FAB_FREQ_OPT) &
+		SARL_A370_FAB_FREQ_OPT_MASK);
+
+	switch (id) {
+	case A370_CPU_TO_NBCLK:
+		*mult = a370_nbclk_ratios[opt][0];
+		*div = a370_nbclk_ratios[opt][1];
+		break;
+	case A370_CPU_TO_HCLK:
+		*mult = a370_hclk_ratios[opt][0];
+		*div = a370_hclk_ratios[opt][1];
+		break;
+	case A370_CPU_TO_DRAMCLK:
+		*mult = a370_dramclk_ratios[opt][0];
+		*div = a370_dramclk_ratios[opt][1];
+		break;
+	}
+}
+
+static bool a370_is_sscg_enabled(void __iomem *sar)
+{
+	return !(readl(sar) & SARL_A370_SSCG_ENABLE);
+}
+
+static const struct coreclk_soc_desc a370_coreclks = {
+	.get_tclk_freq = a370_get_tclk_freq,
+	.get_cpu_freq = a370_get_cpu_freq,
+	.get_clk_ratio = a370_get_clk_ratio,
+	.is_sscg_enabled = a370_is_sscg_enabled,
+	.fix_sscg_deviation = kirkwood_fix_sscg_deviation,
+	.ratios = a370_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(a370_coreclk_ratios),
+};
+
+/*
+ * Clock Gating Control
+ */
+
+static const struct clk_gating_soc_desc a370_gating_desc[] __initconst = {
+	{ "audio", NULL, 0, 0 },
+	{ "pex0_en", NULL, 1, 0 },
+	{ "pex1_en", NULL,  2, 0 },
+	{ "ge1", NULL, 3, 0 },
+	{ "ge0", NULL, 4, 0 },
+	{ "pex0", "pex0_en", 5, 0 },
+	{ "pex1", "pex1_en", 9, 0 },
+	{ "sata0", NULL, 15, 0 },
+	{ "sdio", NULL, 17, 0 },
+	{ "crypto", NULL, 23, CLK_IGNORE_UNUSED },
+	{ "tdm", NULL, 25, 0 },
+	{ "ddr", NULL, 28, CLK_IGNORE_UNUSED },
+	{ "sata1", NULL, 30, 0 },
+	{ }
+};
+
+static void __init a370_clk_init(struct device_node *np)
+{
+	struct device_node *cgnp =
+		of_find_compatible_node(NULL, NULL, "marvell,armada-370-gating-clock");
+
+	mvebu_coreclk_setup(np, &a370_coreclks);
+
+	if (cgnp) {
+		mvebu_clk_gating_setup(cgnp, a370_gating_desc);
+		of_node_put(cgnp);
+	}
+}
+CLK_OF_DECLARE(a370_clk, "marvell,armada-370-core-clock", a370_clk_init);
+
diff --git a/drivers/clk/mvebu/armada-375.c b/drivers/clk/mvebu/armada-375.c
new file mode 100644
index 000000000..a7157c690
--- /dev/null
+++ b/drivers/clk/mvebu/armada-375.c
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Armada 375 SoC clocks
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include "common.h"
+
+/*
+ * Core Clocks
+ */
+
+/*
+ * For the Armada 375 SoCs, the CPU, DDR and L2 clocks frequencies are
+ * all modified at the same time, and not separately as for the Armada
+ * 370 or the Armada XP SoCs.
+ *
+ * SAR1[21:17]   : CPU frequency    DDR frequency   L2 frequency
+ *		 6   =  400 MHz	    400 MHz	    200 MHz
+ *		 15  =  600 MHz	    600 MHz	    300 MHz
+ *		 21  =  800 MHz	    534 MHz	    400 MHz
+ *		 25  = 1000 MHz	    500 MHz	    500 MHz
+ *		 others reserved.
+ *
+ * SAR1[22]   : TCLK frequency
+ *		 0 = 166 MHz
+ *		 1 = 200 MHz
+ */
+
+#define SAR1_A375_TCLK_FREQ_OPT		   22
+#define SAR1_A375_TCLK_FREQ_OPT_MASK	   0x1
+#define SAR1_A375_CPU_DDR_L2_FREQ_OPT	   17
+#define SAR1_A375_CPU_DDR_L2_FREQ_OPT_MASK 0x1F
+
+static const u32 armada_375_tclk_frequencies[] __initconst = {
+	166000000,
+	200000000,
+};
+
+static u32 __init armada_375_get_tclk_freq(void __iomem *sar)
+{
+	u8 tclk_freq_select;
+
+	tclk_freq_select = ((readl(sar) >> SAR1_A375_TCLK_FREQ_OPT) &
+			    SAR1_A375_TCLK_FREQ_OPT_MASK);
+	return armada_375_tclk_frequencies[tclk_freq_select];
+}
+
+
+static const u32 armada_375_cpu_frequencies[] __initconst = {
+	0, 0, 0, 0, 0, 0,
+	400000000,
+	0, 0, 0, 0, 0, 0, 0, 0,
+	600000000,
+	0, 0, 0, 0, 0,
+	800000000,
+	0, 0, 0,
+	1000000000,
+};
+
+static u32 __init armada_375_get_cpu_freq(void __iomem *sar)
+{
+	u8 cpu_freq_select;
+
+	cpu_freq_select = ((readl(sar) >> SAR1_A375_CPU_DDR_L2_FREQ_OPT) &
+			   SAR1_A375_CPU_DDR_L2_FREQ_OPT_MASK);
+	if (cpu_freq_select >= ARRAY_SIZE(armada_375_cpu_frequencies)) {
+		pr_err("Selected CPU frequency (%d) unsupported\n",
+			cpu_freq_select);
+		return 0;
+	} else
+		return armada_375_cpu_frequencies[cpu_freq_select];
+}
+
+enum { A375_CPU_TO_DDR, A375_CPU_TO_L2 };
+
+static const struct coreclk_ratio armada_375_coreclk_ratios[] __initconst = {
+	{ .id = A375_CPU_TO_L2,	 .name = "l2clk" },
+	{ .id = A375_CPU_TO_DDR, .name = "ddrclk" },
+};
+
+static const int armada_375_cpu_l2_ratios[32][2] __initconst = {
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {1, 2}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {1, 2},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {1, 2}, {0, 1}, {0, 1},
+	{0, 1}, {1, 2}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static const int armada_375_cpu_ddr_ratios[32][2] __initconst = {
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {1, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {2, 3},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {2, 3}, {0, 1}, {0, 1},
+	{0, 1}, {1, 2}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static void __init armada_375_get_clk_ratio(
+	void __iomem *sar, int id, int *mult, int *div)
+{
+	u32 opt = ((readl(sar) >> SAR1_A375_CPU_DDR_L2_FREQ_OPT) &
+		SAR1_A375_CPU_DDR_L2_FREQ_OPT_MASK);
+
+	switch (id) {
+	case A375_CPU_TO_L2:
+		*mult = armada_375_cpu_l2_ratios[opt][0];
+		*div = armada_375_cpu_l2_ratios[opt][1];
+		break;
+	case A375_CPU_TO_DDR:
+		*mult = armada_375_cpu_ddr_ratios[opt][0];
+		*div = armada_375_cpu_ddr_ratios[opt][1];
+		break;
+	}
+}
+
+static const struct coreclk_soc_desc armada_375_coreclks = {
+	.get_tclk_freq = armada_375_get_tclk_freq,
+	.get_cpu_freq = armada_375_get_cpu_freq,
+	.get_clk_ratio = armada_375_get_clk_ratio,
+	.ratios = armada_375_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(armada_375_coreclk_ratios),
+};
+
+static void __init armada_375_coreclk_init(struct device_node *np)
+{
+	mvebu_coreclk_setup(np, &armada_375_coreclks);
+}
+CLK_OF_DECLARE(armada_375_core_clk, "marvell,armada-375-core-clock",
+	       armada_375_coreclk_init);
+
+/*
+ * Clock Gating Control
+ */
+static const struct clk_gating_soc_desc armada_375_gating_desc[] __initconst = {
+	{ "mu", NULL, 2 },
+	{ "pp", NULL, 3 },
+	{ "ptp", NULL, 4 },
+	{ "pex0", NULL, 5 },
+	{ "pex1", NULL, 6 },
+	{ "audio", NULL, 8 },
+	{ "nd_clk", "nand", 11 },
+	{ "sata0_link", "sata0_core", 14 },
+	{ "sata0_core", NULL, 15 },
+	{ "usb3", NULL, 16 },
+	{ "sdio", NULL, 17 },
+	{ "usb", NULL, 18 },
+	{ "gop", NULL, 19 },
+	{ "sata1_link", "sata1_core", 20 },
+	{ "sata1_core", NULL, 21 },
+	{ "xor0", NULL, 22 },
+	{ "xor1", NULL, 23 },
+	{ "copro", NULL, 24 },
+	{ "tdm", NULL, 25 },
+	{ "crypto0_enc", NULL, 28 },
+	{ "crypto0_core", NULL, 29 },
+	{ "crypto1_enc", NULL, 30 },
+	{ "crypto1_core", NULL, 31 },
+	{ }
+};
+
+static void __init armada_375_clk_gating_init(struct device_node *np)
+{
+	mvebu_clk_gating_setup(np, armada_375_gating_desc);
+}
+CLK_OF_DECLARE(armada_375_clk_gating, "marvell,armada-375-gating-clock",
+	       armada_375_clk_gating_init);
diff --git a/drivers/clk/mvebu/armada-37xx-periph.c b/drivers/clk/mvebu/armada-37xx-periph.c
new file mode 100644
index 000000000..e3777ca65
--- /dev/null
+++ b/drivers/clk/mvebu/armada-37xx-periph.c
@@ -0,0 +1,808 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Marvell Armada 37xx SoC Peripheral clocks
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ * Most of the peripheral clocks can be modelled like this:
+ *             _____    _______    _______
+ * TBG-A-P  --|     |  |       |  |       |   ______
+ * TBG-B-P  --| Mux |--| /div1 |--| /div2 |--| Gate |--> perip_clk
+ * TBG-A-S  --|     |  |       |  |       |  |______|
+ * TBG-B-S  --|_____|  |_______|  |_______|
+ *
+ * However some clocks may use only one or two block or and use the
+ * xtal clock as parent.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+
+#define TBG_SEL		0x0
+#define DIV_SEL0	0x4
+#define DIV_SEL1	0x8
+#define DIV_SEL2	0xC
+#define CLK_SEL		0x10
+#define CLK_DIS		0x14
+
+#define  ARMADA_37XX_DVFS_LOAD_1 1
+#define LOAD_LEVEL_NR	4
+
+#define ARMADA_37XX_NB_L0L1	0x18
+#define ARMADA_37XX_NB_L2L3	0x1C
+#define		ARMADA_37XX_NB_TBG_DIV_OFF	13
+#define		ARMADA_37XX_NB_TBG_DIV_MASK	0x7
+#define		ARMADA_37XX_NB_CLK_SEL_OFF	11
+#define		ARMADA_37XX_NB_CLK_SEL_MASK	0x1
+#define		ARMADA_37XX_NB_TBG_SEL_OFF	9
+#define		ARMADA_37XX_NB_TBG_SEL_MASK	0x3
+#define		ARMADA_37XX_NB_CONFIG_SHIFT	16
+#define ARMADA_37XX_NB_DYN_MOD	0x24
+#define		ARMADA_37XX_NB_DFS_EN	31
+#define ARMADA_37XX_NB_CPU_LOAD	0x30
+#define		ARMADA_37XX_NB_CPU_LOAD_MASK	0x3
+#define		ARMADA_37XX_DVFS_LOAD_0		0
+#define		ARMADA_37XX_DVFS_LOAD_1		1
+#define		ARMADA_37XX_DVFS_LOAD_2		2
+#define		ARMADA_37XX_DVFS_LOAD_3		3
+
+struct clk_periph_driver_data {
+	struct clk_hw_onecell_data *hw_data;
+	spinlock_t lock;
+	void __iomem *reg;
+
+	/* Storage registers for suspend/resume operations */
+	u32 tbg_sel;
+	u32 div_sel0;
+	u32 div_sel1;
+	u32 div_sel2;
+	u32 clk_sel;
+	u32 clk_dis;
+};
+
+struct clk_double_div {
+	struct clk_hw hw;
+	void __iomem *reg1;
+	u8 shift1;
+	void __iomem *reg2;
+	u8 shift2;
+};
+
+struct clk_pm_cpu {
+	struct clk_hw hw;
+	void __iomem *reg_mux;
+	u8 shift_mux;
+	u32 mask_mux;
+	void __iomem *reg_div;
+	u8 shift_div;
+	struct regmap *nb_pm_base;
+	unsigned long l1_expiration;
+};
+
+#define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
+#define to_clk_pm_cpu(_hw) container_of(_hw, struct clk_pm_cpu, hw)
+
+struct clk_periph_data {
+	const char *name;
+	const char * const *parent_names;
+	int num_parents;
+	struct clk_hw *mux_hw;
+	struct clk_hw *rate_hw;
+	struct clk_hw *gate_hw;
+	struct clk_hw *muxrate_hw;
+	bool is_double_div;
+};
+
+static const struct clk_div_table clk_table6[] = {
+	{ .val = 1, .div = 1, },
+	{ .val = 2, .div = 2, },
+	{ .val = 3, .div = 3, },
+	{ .val = 4, .div = 4, },
+	{ .val = 5, .div = 5, },
+	{ .val = 6, .div = 6, },
+	{ .val = 0, .div = 0, }, /* last entry */
+};
+
+static const struct clk_div_table clk_table1[] = {
+	{ .val = 0, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 0, .div = 0, }, /* last entry */
+};
+
+static const struct clk_div_table clk_table2[] = {
+	{ .val = 0, .div = 2, },
+	{ .val = 1, .div = 4, },
+	{ .val = 0, .div = 0, }, /* last entry */
+};
+
+static const struct clk_ops clk_double_div_ops;
+static const struct clk_ops clk_pm_cpu_ops;
+
+#define PERIPH_GATE(_name, _bit)		\
+struct clk_gate gate_##_name = {		\
+	.reg = (void *)CLK_DIS,			\
+	.bit_idx = _bit,			\
+	.hw.init = &(struct clk_init_data){	\
+		.ops =  &clk_gate_ops,		\
+	}					\
+};
+
+#define PERIPH_MUX(_name, _shift)		\
+struct clk_mux mux_##_name = {			\
+	.reg = (void *)TBG_SEL,			\
+	.shift = _shift,			\
+	.mask = 3,				\
+	.hw.init = &(struct clk_init_data){	\
+		.ops =  &clk_mux_ro_ops,	\
+	}					\
+};
+
+#define PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2)	\
+struct clk_double_div rate_##_name = {		\
+	.reg1 = (void *)_reg1,			\
+	.reg2 = (void *)_reg2,			\
+	.shift1 = _shift1,			\
+	.shift2 = _shift2,			\
+	.hw.init = &(struct clk_init_data){	\
+		.ops =  &clk_double_div_ops,	\
+	}					\
+};
+
+#define PERIPH_DIV(_name, _reg, _shift, _table)	\
+struct clk_divider rate_##_name = {		\
+	.reg = (void *)_reg,			\
+	.table = _table,			\
+	.shift = _shift,			\
+	.hw.init = &(struct clk_init_data){	\
+		.ops =  &clk_divider_ro_ops,	\
+	}					\
+};
+
+#define PERIPH_PM_CPU(_name, _shift1, _reg, _shift2)	\
+struct clk_pm_cpu muxrate_##_name = {		\
+	.reg_mux = (void *)TBG_SEL,		\
+	.mask_mux = 3,				\
+	.shift_mux = _shift1,			\
+	.reg_div = (void *)_reg,		\
+	.shift_div = _shift2,			\
+	.hw.init = &(struct clk_init_data){	\
+		.ops =  &clk_pm_cpu_ops,	\
+	}					\
+};
+
+#define PERIPH_CLK_FULL_DD(_name, _bit, _shift, _reg1, _reg2, _shift1, _shift2)\
+static PERIPH_GATE(_name, _bit);			    \
+static PERIPH_MUX(_name, _shift);			    \
+static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);
+
+#define PERIPH_CLK_FULL(_name, _bit, _shift, _reg, _shift1, _table)	\
+static PERIPH_GATE(_name, _bit);			    \
+static PERIPH_MUX(_name, _shift);			    \
+static PERIPH_DIV(_name, _reg, _shift1, _table);
+
+#define PERIPH_CLK_GATE_DIV(_name, _bit,  _reg, _shift, _table)	\
+static PERIPH_GATE(_name, _bit);			\
+static PERIPH_DIV(_name, _reg, _shift, _table);
+
+#define PERIPH_CLK_MUX_DD(_name, _shift, _reg1, _reg2, _shift1, _shift2)\
+static PERIPH_MUX(_name, _shift);			    \
+static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);
+
+#define REF_CLK_FULL(_name)				\
+	{ .name = #_name,				\
+	  .parent_names = (const char *[]){ "TBG-A-P",	\
+	      "TBG-B-P", "TBG-A-S", "TBG-B-S"},		\
+	  .num_parents = 4,				\
+	  .mux_hw = &mux_##_name.hw,			\
+	  .gate_hw = &gate_##_name.hw,			\
+	  .rate_hw = &rate_##_name.hw,			\
+	}
+
+#define REF_CLK_FULL_DD(_name)				\
+	{ .name = #_name,				\
+	  .parent_names = (const char *[]){ "TBG-A-P",	\
+	      "TBG-B-P", "TBG-A-S", "TBG-B-S"},		\
+	  .num_parents = 4,				\
+	  .mux_hw = &mux_##_name.hw,			\
+	  .gate_hw = &gate_##_name.hw,			\
+	  .rate_hw = &rate_##_name.hw,			\
+	  .is_double_div = true,			\
+	}
+
+#define REF_CLK_GATE(_name, _parent_name)			\
+	{ .name = #_name,					\
+	  .parent_names = (const char *[]){ _parent_name},	\
+	  .num_parents = 1,					\
+	  .gate_hw = &gate_##_name.hw,				\
+	}
+
+#define REF_CLK_GATE_DIV(_name, _parent_name)			\
+	{ .name = #_name,					\
+	  .parent_names = (const char *[]){ _parent_name},	\
+	  .num_parents = 1,					\
+	  .gate_hw = &gate_##_name.hw,				\
+	  .rate_hw = &rate_##_name.hw,				\
+	}
+
+#define REF_CLK_PM_CPU(_name)				\
+	{ .name = #_name,				\
+	  .parent_names = (const char *[]){ "TBG-A-P",	\
+	      "TBG-B-P", "TBG-A-S", "TBG-B-S"},		\
+	  .num_parents = 4,				\
+	  .muxrate_hw = &muxrate_##_name.hw,		\
+	}
+
+#define REF_CLK_MUX_DD(_name)				\
+	{ .name = #_name,				\
+	  .parent_names = (const char *[]){ "TBG-A-P",	\
+	      "TBG-B-P", "TBG-A-S", "TBG-B-S"},		\
+	  .num_parents = 4,				\
+	  .mux_hw = &mux_##_name.hw,			\
+	  .rate_hw = &rate_##_name.hw,			\
+	  .is_double_div = true,			\
+	}
+
+/* NB periph clocks */
+PERIPH_CLK_FULL_DD(mmc, 2, 0, DIV_SEL2, DIV_SEL2, 16, 13);
+PERIPH_CLK_FULL_DD(sata_host, 3, 2, DIV_SEL2, DIV_SEL2, 10, 7);
+PERIPH_CLK_FULL_DD(sec_at, 6, 4, DIV_SEL1, DIV_SEL1, 3, 0);
+PERIPH_CLK_FULL_DD(sec_dap, 7, 6, DIV_SEL1, DIV_SEL1, 9, 6);
+PERIPH_CLK_FULL_DD(tscem, 8, 8, DIV_SEL1, DIV_SEL1, 15, 12);
+PERIPH_CLK_FULL(tscem_tmx, 10, 10, DIV_SEL1, 18, clk_table6);
+static PERIPH_GATE(avs, 11);
+PERIPH_CLK_FULL_DD(pwm, 13, 14, DIV_SEL0, DIV_SEL0, 3, 0);
+PERIPH_CLK_FULL_DD(sqf, 12, 12, DIV_SEL1, DIV_SEL1, 27, 24);
+static PERIPH_GATE(i2c_2, 16);
+static PERIPH_GATE(i2c_1, 17);
+PERIPH_CLK_GATE_DIV(ddr_phy, 19, DIV_SEL0, 18, clk_table2);
+PERIPH_CLK_FULL_DD(ddr_fclk, 21, 16, DIV_SEL0, DIV_SEL0, 15, 12);
+PERIPH_CLK_FULL(trace, 22, 18, DIV_SEL0, 20, clk_table6);
+PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL0, 23, clk_table6);
+PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
+static PERIPH_PM_CPU(cpu, 22, DIV_SEL0, 28);
+
+static struct clk_periph_data data_nb[] = {
+	REF_CLK_FULL_DD(mmc),
+	REF_CLK_FULL_DD(sata_host),
+	REF_CLK_FULL_DD(sec_at),
+	REF_CLK_FULL_DD(sec_dap),
+	REF_CLK_FULL_DD(tscem),
+	REF_CLK_FULL(tscem_tmx),
+	REF_CLK_GATE(avs, "xtal"),
+	REF_CLK_FULL_DD(sqf),
+	REF_CLK_FULL_DD(pwm),
+	REF_CLK_GATE(i2c_2, "xtal"),
+	REF_CLK_GATE(i2c_1, "xtal"),
+	REF_CLK_GATE_DIV(ddr_phy, "TBG-A-S"),
+	REF_CLK_FULL_DD(ddr_fclk),
+	REF_CLK_FULL(trace),
+	REF_CLK_FULL(counter),
+	REF_CLK_FULL_DD(eip97),
+	REF_CLK_PM_CPU(cpu),
+	{ },
+};
+
+/* SB periph clocks */
+PERIPH_CLK_MUX_DD(gbe_50, 6, DIV_SEL2, DIV_SEL2, 6, 9);
+PERIPH_CLK_MUX_DD(gbe_core, 8, DIV_SEL1, DIV_SEL1, 18, 21);
+PERIPH_CLK_MUX_DD(gbe_125, 10, DIV_SEL1, DIV_SEL1, 6, 9);
+static PERIPH_GATE(gbe1_50, 0);
+static PERIPH_GATE(gbe0_50, 1);
+static PERIPH_GATE(gbe1_125, 2);
+static PERIPH_GATE(gbe0_125, 3);
+PERIPH_CLK_GATE_DIV(gbe1_core, 4, DIV_SEL1, 13, clk_table1);
+PERIPH_CLK_GATE_DIV(gbe0_core, 5, DIV_SEL1, 14, clk_table1);
+PERIPH_CLK_GATE_DIV(gbe_bm, 12, DIV_SEL1, 0, clk_table1);
+PERIPH_CLK_FULL_DD(sdio, 11, 14, DIV_SEL0, DIV_SEL0, 3, 6);
+PERIPH_CLK_FULL_DD(usb32_usb2_sys, 16, 16, DIV_SEL0, DIV_SEL0, 9, 12);
+PERIPH_CLK_FULL_DD(usb32_ss_sys, 17, 18, DIV_SEL0, DIV_SEL0, 15, 18);
+static PERIPH_GATE(pcie, 14);
+
+static struct clk_periph_data data_sb[] = {
+	REF_CLK_MUX_DD(gbe_50),
+	REF_CLK_MUX_DD(gbe_core),
+	REF_CLK_MUX_DD(gbe_125),
+	REF_CLK_GATE(gbe1_50, "gbe_50"),
+	REF_CLK_GATE(gbe0_50, "gbe_50"),
+	REF_CLK_GATE(gbe1_125, "gbe_125"),
+	REF_CLK_GATE(gbe0_125, "gbe_125"),
+	REF_CLK_GATE_DIV(gbe1_core, "gbe_core"),
+	REF_CLK_GATE_DIV(gbe0_core, "gbe_core"),
+	REF_CLK_GATE_DIV(gbe_bm, "gbe_core"),
+	REF_CLK_FULL_DD(sdio),
+	REF_CLK_FULL_DD(usb32_usb2_sys),
+	REF_CLK_FULL_DD(usb32_ss_sys),
+	REF_CLK_GATE(pcie, "gbe_core"),
+	{ },
+};
+
+static unsigned int get_div(void __iomem *reg, int shift)
+{
+	u32 val;
+
+	val = (readl(reg) >> shift) & 0x7;
+	if (val > 6)
+		return 0;
+	return val;
+}
+
+static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw,
+						unsigned long parent_rate)
+{
+	struct clk_double_div *double_div = to_clk_double_div(hw);
+	unsigned int div;
+
+	div = get_div(double_div->reg1, double_div->shift1);
+	div *= get_div(double_div->reg2, double_div->shift2);
+
+	return DIV_ROUND_UP_ULL((u64)parent_rate, div);
+}
+
+static const struct clk_ops clk_double_div_ops = {
+	.recalc_rate = clk_double_div_recalc_rate,
+};
+
+static void armada_3700_pm_dvfs_update_regs(unsigned int load_level,
+					    unsigned int *reg,
+					    unsigned int *offset)
+{
+	if (load_level <= ARMADA_37XX_DVFS_LOAD_1)
+		*reg = ARMADA_37XX_NB_L0L1;
+	else
+		*reg = ARMADA_37XX_NB_L2L3;
+
+	if (load_level == ARMADA_37XX_DVFS_LOAD_0 ||
+	    load_level ==  ARMADA_37XX_DVFS_LOAD_2)
+		*offset += ARMADA_37XX_NB_CONFIG_SHIFT;
+}
+
+static bool armada_3700_pm_dvfs_is_enabled(struct regmap *base)
+{
+	unsigned int val, reg = ARMADA_37XX_NB_DYN_MOD;
+
+	if (IS_ERR(base))
+		return false;
+
+	regmap_read(base, reg, &val);
+
+	return !!(val & BIT(ARMADA_37XX_NB_DFS_EN));
+}
+
+static unsigned int armada_3700_pm_dvfs_get_cpu_div(struct regmap *base)
+{
+	unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
+	unsigned int offset = ARMADA_37XX_NB_TBG_DIV_OFF;
+	unsigned int load_level, div;
+
+	/*
+	 * This function is always called after the function
+	 * armada_3700_pm_dvfs_is_enabled, so no need to check again
+	 * if the base is valid.
+	 */
+	regmap_read(base, reg, &load_level);
+
+	/*
+	 * The register and the offset inside this register accessed to
+	 * read the current divider depend on the load level
+	 */
+	load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
+	armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
+
+	regmap_read(base, reg, &div);
+
+	return (div >> offset) & ARMADA_37XX_NB_TBG_DIV_MASK;
+}
+
+static unsigned int armada_3700_pm_dvfs_get_cpu_parent(struct regmap *base)
+{
+	unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
+	unsigned int offset = ARMADA_37XX_NB_TBG_SEL_OFF;
+	unsigned int load_level, sel;
+
+	/*
+	 * This function is always called after the function
+	 * armada_3700_pm_dvfs_is_enabled, so no need to check again
+	 * if the base is valid
+	 */
+	regmap_read(base, reg, &load_level);
+
+	/*
+	 * The register and the offset inside this register accessed to
+	 * read the current divider depend on the load level
+	 */
+	load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
+	armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
+
+	regmap_read(base, reg, &sel);
+
+	return (sel >> offset) & ARMADA_37XX_NB_TBG_SEL_MASK;
+}
+
+static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
+{
+	struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
+	u32 val;
+
+	if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) {
+		val = armada_3700_pm_dvfs_get_cpu_parent(pm_cpu->nb_pm_base);
+	} else {
+		val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
+		val &= pm_cpu->mask_mux;
+	}
+
+	return val;
+}
+
+static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw,
+					    unsigned long parent_rate)
+{
+	struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
+	unsigned int div;
+
+	if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base))
+		div = armada_3700_pm_dvfs_get_cpu_div(pm_cpu->nb_pm_base);
+	else
+		div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
+	return DIV_ROUND_UP_ULL((u64)parent_rate, div);
+}
+
+static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *parent_rate)
+{
+	struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
+	struct regmap *base = pm_cpu->nb_pm_base;
+	unsigned int div = *parent_rate / rate;
+	unsigned int load_level;
+	/* only available when DVFS is enabled */
+	if (!armada_3700_pm_dvfs_is_enabled(base))
+		return -EINVAL;
+
+	for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
+		unsigned int reg, val, offset = ARMADA_37XX_NB_TBG_DIV_OFF;
+
+		armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
+
+		regmap_read(base, reg, &val);
+
+		val >>= offset;
+		val &= ARMADA_37XX_NB_TBG_DIV_MASK;
+		if (val == div)
+			/*
+			 * We found a load level matching the target
+			 * divider, switch to this load level and
+			 * return.
+			 */
+			return *parent_rate / div;
+	}
+
+	/* We didn't find any valid divider */
+	return -EINVAL;
+}
+
+/*
+ * Workaround when base CPU frequnecy is 1000 or 1200 MHz
+ *
+ * Switching the CPU from the L2 or L3 frequencies (250/300 or 200 MHz
+ * respectively) to L0 frequency (1/1.2 GHz) requires a significant
+ * amount of time to let VDD stabilize to the appropriate
+ * voltage. This amount of time is large enough that it cannot be
+ * covered by the hardware countdown register. Due to this, the CPU
+ * might start operating at L0 before the voltage is stabilized,
+ * leading to CPU stalls.
+ *
+ * To work around this problem, we prevent switching directly from the
+ * L2/L3 frequencies to the L0 frequency, and instead switch to the L1
+ * frequency in-between. The sequence therefore becomes:
+ * 1. First switch from L2/L3 (200/250/300 MHz) to L1 (500/600 MHz)
+ * 2. Sleep 20ms for stabling VDD voltage
+ * 3. Then switch from L1 (500/600 MHz) to L0 (1000/1200 MHz).
+ */
+static void clk_pm_cpu_set_rate_wa(struct clk_pm_cpu *pm_cpu,
+				   unsigned int new_level, unsigned long rate,
+				   struct regmap *base)
+{
+	unsigned int cur_level;
+
+	regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level);
+	cur_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
+
+	if (cur_level == new_level)
+		return;
+
+	/*
+	 * System wants to go to L1 on its own. If we are going from L2/L3,
+	 * remember when 20ms will expire. If from L0, set the value so that
+	 * next switch to L0 won't have to wait.
+	 */
+	if (new_level == ARMADA_37XX_DVFS_LOAD_1) {
+		if (cur_level == ARMADA_37XX_DVFS_LOAD_0)
+			pm_cpu->l1_expiration = jiffies;
+		else
+			pm_cpu->l1_expiration = jiffies + msecs_to_jiffies(20);
+		return;
+	}
+
+	/*
+	 * If we are setting to L2/L3, just invalidate L1 expiration time,
+	 * sleeping is not needed.
+	 */
+	if (rate < 1000*1000*1000)
+		goto invalidate_l1_exp;
+
+	/*
+	 * We are going to L0 with rate >= 1GHz. Check whether we have been at
+	 * L1 for long enough time. If not, go to L1 for 20ms.
+	 */
+	if (pm_cpu->l1_expiration && time_is_before_eq_jiffies(pm_cpu->l1_expiration))
+		goto invalidate_l1_exp;
+
+	regmap_update_bits(base, ARMADA_37XX_NB_CPU_LOAD,
+			   ARMADA_37XX_NB_CPU_LOAD_MASK,
+			   ARMADA_37XX_DVFS_LOAD_1);
+	msleep(20);
+
+invalidate_l1_exp:
+	pm_cpu->l1_expiration = 0;
+}
+
+static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
+	struct regmap *base = pm_cpu->nb_pm_base;
+	unsigned int div = parent_rate / rate;
+	unsigned int load_level;
+
+	/* only available when DVFS is enabled */
+	if (!armada_3700_pm_dvfs_is_enabled(base))
+		return -EINVAL;
+
+	for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
+		unsigned int reg, mask, val,
+			offset = ARMADA_37XX_NB_TBG_DIV_OFF;
+
+		armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
+
+		regmap_read(base, reg, &val);
+		val >>= offset;
+		val &= ARMADA_37XX_NB_TBG_DIV_MASK;
+
+		if (val == div) {
+			/*
+			 * We found a load level matching the target
+			 * divider, switch to this load level and
+			 * return.
+			 */
+			reg = ARMADA_37XX_NB_CPU_LOAD;
+			mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
+
+			/* Apply workaround when base CPU frequency is 1000 or 1200 MHz */
+			if (parent_rate >= 1000*1000*1000)
+				clk_pm_cpu_set_rate_wa(pm_cpu, load_level, rate, base);
+
+			regmap_update_bits(base, reg, mask, load_level);
+
+			return rate;
+		}
+	}
+
+	/* We didn't find any valid divider */
+	return -EINVAL;
+}
+
+static const struct clk_ops clk_pm_cpu_ops = {
+	.get_parent = clk_pm_cpu_get_parent,
+	.round_rate = clk_pm_cpu_round_rate,
+	.set_rate = clk_pm_cpu_set_rate,
+	.recalc_rate = clk_pm_cpu_recalc_rate,
+};
+
+static const struct of_device_id armada_3700_periph_clock_of_match[] = {
+	{ .compatible = "marvell,armada-3700-periph-clock-nb",
+	  .data = data_nb, },
+	{ .compatible = "marvell,armada-3700-periph-clock-sb",
+	.data = data_sb, },
+	{ }
+};
+
+static int armada_3700_add_composite_clk(const struct clk_periph_data *data,
+					 void __iomem *reg, spinlock_t *lock,
+					 struct device *dev, struct clk_hw **hw)
+{
+	const struct clk_ops *mux_ops = NULL, *gate_ops = NULL,
+		*rate_ops = NULL;
+	struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *rate_hw = NULL;
+
+	if (data->mux_hw) {
+		struct clk_mux *mux;
+
+		mux_hw = data->mux_hw;
+		mux = to_clk_mux(mux_hw);
+		mux->lock = lock;
+		mux_ops = mux_hw->init->ops;
+		mux->reg = reg + (u64)mux->reg;
+	}
+
+	if (data->gate_hw) {
+		struct clk_gate *gate;
+
+		gate_hw = data->gate_hw;
+		gate = to_clk_gate(gate_hw);
+		gate->lock = lock;
+		gate_ops = gate_hw->init->ops;
+		gate->reg = reg + (u64)gate->reg;
+		gate->flags = CLK_GATE_SET_TO_DISABLE;
+	}
+
+	if (data->rate_hw) {
+		rate_hw = data->rate_hw;
+		rate_ops = rate_hw->init->ops;
+		if (data->is_double_div) {
+			struct clk_double_div *rate;
+
+			rate =  to_clk_double_div(rate_hw);
+			rate->reg1 = reg + (u64)rate->reg1;
+			rate->reg2 = reg + (u64)rate->reg2;
+		} else {
+			struct clk_divider *rate = to_clk_divider(rate_hw);
+			const struct clk_div_table *clkt;
+			int table_size = 0;
+
+			rate->reg = reg + (u64)rate->reg;
+			for (clkt = rate->table; clkt->div; clkt++)
+				table_size++;
+			rate->width = order_base_2(table_size);
+			rate->lock = lock;
+		}
+	}
+
+	if (data->muxrate_hw) {
+		struct clk_pm_cpu *pmcpu_clk;
+		struct clk_hw *muxrate_hw = data->muxrate_hw;
+		struct regmap *map;
+
+		pmcpu_clk =  to_clk_pm_cpu(muxrate_hw);
+		pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux;
+		pmcpu_clk->reg_div = reg + (u64)pmcpu_clk->reg_div;
+
+		mux_hw = muxrate_hw;
+		rate_hw = muxrate_hw;
+		mux_ops = muxrate_hw->init->ops;
+		rate_ops = muxrate_hw->init->ops;
+
+		map = syscon_regmap_lookup_by_compatible(
+				"marvell,armada-3700-nb-pm");
+		pmcpu_clk->nb_pm_base = map;
+	}
+
+	*hw = clk_hw_register_composite(dev, data->name, data->parent_names,
+					data->num_parents, mux_hw,
+					mux_ops, rate_hw, rate_ops,
+					gate_hw, gate_ops, CLK_IGNORE_UNUSED);
+
+	return PTR_ERR_OR_ZERO(*hw);
+}
+
+static int __maybe_unused armada_3700_periph_clock_suspend(struct device *dev)
+{
+	struct clk_periph_driver_data *data = dev_get_drvdata(dev);
+
+	data->tbg_sel = readl(data->reg + TBG_SEL);
+	data->div_sel0 = readl(data->reg + DIV_SEL0);
+	data->div_sel1 = readl(data->reg + DIV_SEL1);
+	data->div_sel2 = readl(data->reg + DIV_SEL2);
+	data->clk_sel = readl(data->reg + CLK_SEL);
+	data->clk_dis = readl(data->reg + CLK_DIS);
+
+	return 0;
+}
+
+static int __maybe_unused armada_3700_periph_clock_resume(struct device *dev)
+{
+	struct clk_periph_driver_data *data = dev_get_drvdata(dev);
+
+	/* Follow the same order than what the Cortex-M3 does (ATF code) */
+	writel(data->clk_dis, data->reg + CLK_DIS);
+	writel(data->div_sel0, data->reg + DIV_SEL0);
+	writel(data->div_sel1, data->reg + DIV_SEL1);
+	writel(data->div_sel2, data->reg + DIV_SEL2);
+	writel(data->tbg_sel, data->reg + TBG_SEL);
+	writel(data->clk_sel, data->reg + CLK_SEL);
+
+	return 0;
+}
+
+static const struct dev_pm_ops armada_3700_periph_clock_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(armada_3700_periph_clock_suspend,
+				      armada_3700_periph_clock_resume)
+};
+
+static int armada_3700_periph_clock_probe(struct platform_device *pdev)
+{
+	struct clk_periph_driver_data *driver_data;
+	struct device_node *np = pdev->dev.of_node;
+	const struct clk_periph_data *data;
+	struct device *dev = &pdev->dev;
+	int num_periph = 0, i, ret;
+	struct resource *res;
+
+	data = of_device_get_match_data(dev);
+	if (!data)
+		return -ENODEV;
+
+	while (data[num_periph].name)
+		num_periph++;
+
+	driver_data = devm_kzalloc(dev, sizeof(*driver_data), GFP_KERNEL);
+	if (!driver_data)
+		return -ENOMEM;
+
+	driver_data->hw_data = devm_kzalloc(dev,
+					    struct_size(driver_data->hw_data,
+							hws, num_periph),
+					    GFP_KERNEL);
+	if (!driver_data->hw_data)
+		return -ENOMEM;
+	driver_data->hw_data->num = num_periph;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	driver_data->reg = devm_ioremap_resource(dev, res);
+	if (IS_ERR(driver_data->reg))
+		return PTR_ERR(driver_data->reg);
+
+	spin_lock_init(&driver_data->lock);
+
+	for (i = 0; i < num_periph; i++) {
+		struct clk_hw **hw = &driver_data->hw_data->hws[i];
+		if (armada_3700_add_composite_clk(&data[i], driver_data->reg,
+						  &driver_data->lock, dev, hw))
+			dev_err(dev, "Can't register periph clock %s\n",
+				data[i].name);
+	}
+
+	ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
+				     driver_data->hw_data);
+	if (ret) {
+		for (i = 0; i < num_periph; i++)
+			clk_hw_unregister(driver_data->hw_data->hws[i]);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, driver_data);
+	return 0;
+}
+
+static int armada_3700_periph_clock_remove(struct platform_device *pdev)
+{
+	struct clk_periph_driver_data *data = platform_get_drvdata(pdev);
+	struct clk_hw_onecell_data *hw_data = data->hw_data;
+	int i;
+
+	of_clk_del_provider(pdev->dev.of_node);
+
+	for (i = 0; i < hw_data->num; i++)
+		clk_hw_unregister(hw_data->hws[i]);
+
+	return 0;
+}
+
+static struct platform_driver armada_3700_periph_clock_driver = {
+	.probe = armada_3700_periph_clock_probe,
+	.remove = armada_3700_periph_clock_remove,
+	.driver		= {
+		.name	= "marvell-armada-3700-periph-clock",
+		.of_match_table = armada_3700_periph_clock_of_match,
+		.pm	= &armada_3700_periph_clock_pm_ops,
+	},
+};
+
+builtin_platform_driver(armada_3700_periph_clock_driver);
diff --git a/drivers/clk/mvebu/armada-37xx-tbg.c b/drivers/clk/mvebu/armada-37xx-tbg.c
new file mode 100644
index 000000000..fc403ad73
--- /dev/null
+++ b/drivers/clk/mvebu/armada-37xx-tbg.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Marvell Armada 37xx SoC Time Base Generator clocks
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define NUM_TBG	    4
+
+#define TBG_CTRL0		0x4
+#define TBG_CTRL1		0x8
+#define TBG_CTRL7		0x20
+#define TBG_CTRL8		0x30
+
+#define TBG_DIV_MASK		0x1FF
+
+#define TBG_A_REFDIV		0
+#define TBG_B_REFDIV		16
+
+#define TBG_A_FBDIV		2
+#define TBG_B_FBDIV		18
+
+#define TBG_A_VCODIV_SE		0
+#define TBG_B_VCODIV_SE		16
+
+#define TBG_A_VCODIV_DIFF	1
+#define TBG_B_VCODIV_DIFF	17
+
+struct tbg_def {
+	char *name;
+	u32 refdiv_offset;
+	u32 fbdiv_offset;
+	u32 vcodiv_reg;
+	u32 vcodiv_offset;
+};
+
+static const struct tbg_def tbg[NUM_TBG] = {
+	{"TBG-A-P", TBG_A_REFDIV, TBG_A_FBDIV, TBG_CTRL8, TBG_A_VCODIV_DIFF},
+	{"TBG-B-P", TBG_B_REFDIV, TBG_B_FBDIV, TBG_CTRL8, TBG_B_VCODIV_DIFF},
+	{"TBG-A-S", TBG_A_REFDIV, TBG_A_FBDIV, TBG_CTRL1, TBG_A_VCODIV_SE},
+	{"TBG-B-S", TBG_B_REFDIV, TBG_B_FBDIV, TBG_CTRL1, TBG_B_VCODIV_SE},
+};
+
+static unsigned int tbg_get_mult(void __iomem *reg, const struct tbg_def *ptbg)
+{
+	u32 val;
+
+	val = readl(reg + TBG_CTRL0);
+
+	return ((val >> ptbg->fbdiv_offset) & TBG_DIV_MASK) << 2;
+}
+
+static unsigned int tbg_get_div(void __iomem *reg, const struct tbg_def *ptbg)
+{
+	u32 val;
+	unsigned int div;
+
+	val = readl(reg + TBG_CTRL7);
+
+	div = (val >> ptbg->refdiv_offset) & TBG_DIV_MASK;
+	if (div == 0)
+		div = 1;
+	val = readl(reg + ptbg->vcodiv_reg);
+
+	div *= 1 << ((val >>  ptbg->vcodiv_offset) & TBG_DIV_MASK);
+
+	return div;
+}
+
+
+static int armada_3700_tbg_clock_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct clk_hw_onecell_data *hw_tbg_data;
+	struct device *dev = &pdev->dev;
+	const char *parent_name;
+	struct resource *res;
+	struct clk *parent;
+	void __iomem *reg;
+	int i;
+
+	hw_tbg_data = devm_kzalloc(&pdev->dev,
+				   struct_size(hw_tbg_data, hws, NUM_TBG),
+				   GFP_KERNEL);
+	if (!hw_tbg_data)
+		return -ENOMEM;
+	hw_tbg_data->num = NUM_TBG;
+	platform_set_drvdata(pdev, hw_tbg_data);
+
+	parent = clk_get(dev, NULL);
+	if (IS_ERR(parent)) {
+		dev_err(dev, "Could get the clock parent\n");
+		return -EINVAL;
+	}
+	parent_name = __clk_get_name(parent);
+	clk_put(parent);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg = devm_ioremap_resource(dev, res);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
+
+	for (i = 0; i < NUM_TBG; i++) {
+		const char *name;
+		unsigned int mult, div;
+
+		name = tbg[i].name;
+		mult = tbg_get_mult(reg, &tbg[i]);
+		div = tbg_get_div(reg, &tbg[i]);
+		hw_tbg_data->hws[i] = clk_hw_register_fixed_factor(NULL, name,
+						parent_name, 0, mult, div);
+		if (IS_ERR(hw_tbg_data->hws[i]))
+			dev_err(dev, "Can't register TBG clock %s\n", name);
+	}
+
+	return of_clk_add_hw_provider(np, of_clk_hw_onecell_get, hw_tbg_data);
+}
+
+static int armada_3700_tbg_clock_remove(struct platform_device *pdev)
+{
+	int i;
+	struct clk_hw_onecell_data *hw_tbg_data = platform_get_drvdata(pdev);
+
+	of_clk_del_provider(pdev->dev.of_node);
+	for (i = 0; i < hw_tbg_data->num; i++)
+		clk_hw_unregister_fixed_factor(hw_tbg_data->hws[i]);
+
+	return 0;
+}
+
+static const struct of_device_id armada_3700_tbg_clock_of_match[] = {
+	{ .compatible = "marvell,armada-3700-tbg-clock", },
+	{ }
+};
+
+static struct platform_driver armada_3700_tbg_clock_driver = {
+	.probe = armada_3700_tbg_clock_probe,
+	.remove = armada_3700_tbg_clock_remove,
+	.driver		= {
+		.name	= "marvell-armada-3700-tbg-clock",
+		.of_match_table = armada_3700_tbg_clock_of_match,
+	},
+};
+
+builtin_platform_driver(armada_3700_tbg_clock_driver);
diff --git a/drivers/clk/mvebu/armada-37xx-xtal.c b/drivers/clk/mvebu/armada-37xx-xtal.c
new file mode 100644
index 000000000..41271351c
--- /dev/null
+++ b/drivers/clk/mvebu/armada-37xx-xtal.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Armada 37xx SoC xtal clocks
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define NB_GPIO1_LATCH	0x8
+#define XTAL_MODE	    BIT(9)
+
+static int armada_3700_xtal_clock_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	const char *xtal_name = "xtal";
+	struct device_node *parent;
+	struct regmap *regmap;
+	struct clk_hw *xtal_hw;
+	unsigned int rate;
+	u32 reg;
+	int ret;
+
+	xtal_hw = devm_kzalloc(&pdev->dev, sizeof(*xtal_hw), GFP_KERNEL);
+	if (!xtal_hw)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, xtal_hw);
+
+	parent = np->parent;
+	if (!parent) {
+		dev_err(&pdev->dev, "no parent\n");
+		return -ENODEV;
+	}
+
+	regmap = syscon_node_to_regmap(parent);
+	if (IS_ERR(regmap)) {
+		dev_err(&pdev->dev, "cannot get regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	ret = regmap_read(regmap, NB_GPIO1_LATCH, &reg);
+	if (ret) {
+		dev_err(&pdev->dev, "cannot read from regmap\n");
+		return ret;
+	}
+
+	if (reg & XTAL_MODE)
+		rate = 40000000;
+	else
+		rate = 25000000;
+
+	of_property_read_string_index(np, "clock-output-names", 0, &xtal_name);
+	xtal_hw = clk_hw_register_fixed_rate(NULL, xtal_name, NULL, 0, rate);
+	if (IS_ERR(xtal_hw))
+		return PTR_ERR(xtal_hw);
+	ret = of_clk_add_hw_provider(np, of_clk_hw_simple_get, xtal_hw);
+
+	return ret;
+}
+
+static int armada_3700_xtal_clock_remove(struct platform_device *pdev)
+{
+	of_clk_del_provider(pdev->dev.of_node);
+
+	return 0;
+}
+
+static const struct of_device_id armada_3700_xtal_clock_of_match[] = {
+	{ .compatible = "marvell,armada-3700-xtal-clock", },
+	{ }
+};
+
+static struct platform_driver armada_3700_xtal_clock_driver = {
+	.probe = armada_3700_xtal_clock_probe,
+	.remove = armada_3700_xtal_clock_remove,
+	.driver		= {
+		.name	= "marvell-armada-3700-xtal-clock",
+		.of_match_table = armada_3700_xtal_clock_of_match,
+	},
+};
+
+builtin_platform_driver(armada_3700_xtal_clock_driver);
diff --git a/drivers/clk/mvebu/armada-38x.c b/drivers/clk/mvebu/armada-38x.c
new file mode 100644
index 000000000..ef2ab81f0
--- /dev/null
+++ b/drivers/clk/mvebu/armada-38x.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Armada 380/385 SoC clocks
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include "common.h"
+
+/*
+ * SAR[14:10] : Ratios between PCLK0, NBCLK, HCLK and DRAM clocks
+ *
+ * SAR[15]    : TCLK frequency
+ *		 0 = 250 MHz
+ *		 1 = 200 MHz
+ */
+
+#define SAR_A380_TCLK_FREQ_OPT		  15
+#define SAR_A380_TCLK_FREQ_OPT_MASK	  0x1
+#define SAR_A380_CPU_DDR_L2_FREQ_OPT	  10
+#define SAR_A380_CPU_DDR_L2_FREQ_OPT_MASK 0x1F
+
+static const u32 armada_38x_tclk_frequencies[] __initconst = {
+	250000000,
+	200000000,
+};
+
+static u32 __init armada_38x_get_tclk_freq(void __iomem *sar)
+{
+	u8 tclk_freq_select;
+
+	tclk_freq_select = ((readl(sar) >> SAR_A380_TCLK_FREQ_OPT) &
+			    SAR_A380_TCLK_FREQ_OPT_MASK);
+	return armada_38x_tclk_frequencies[tclk_freq_select];
+}
+
+static const u32 armada_38x_cpu_frequencies[] __initconst = {
+	666 * 1000 * 1000,  0, 800 * 1000 * 1000, 0,
+	1066 * 1000 * 1000, 0, 1200 * 1000 * 1000, 0,
+	1332 * 1000 * 1000, 0, 0, 0,
+	1600 * 1000 * 1000, 0, 0, 0,
+	1866 * 1000 * 1000, 0, 0, 2000 * 1000 * 1000,
+};
+
+static u32 __init armada_38x_get_cpu_freq(void __iomem *sar)
+{
+	u8 cpu_freq_select;
+
+	cpu_freq_select = ((readl(sar) >> SAR_A380_CPU_DDR_L2_FREQ_OPT) &
+			   SAR_A380_CPU_DDR_L2_FREQ_OPT_MASK);
+	if (cpu_freq_select >= ARRAY_SIZE(armada_38x_cpu_frequencies)) {
+		pr_err("Selected CPU frequency (%d) unsupported\n",
+			cpu_freq_select);
+		return 0;
+	}
+
+	return armada_38x_cpu_frequencies[cpu_freq_select];
+}
+
+enum { A380_CPU_TO_DDR, A380_CPU_TO_L2 };
+
+static const struct coreclk_ratio armada_38x_coreclk_ratios[] __initconst = {
+	{ .id = A380_CPU_TO_L2,	 .name = "l2clk" },
+	{ .id = A380_CPU_TO_DDR, .name = "ddrclk" },
+};
+
+static const int armada_38x_cpu_l2_ratios[32][2] __initconst = {
+	{1, 2}, {0, 1}, {1, 2}, {0, 1},
+	{1, 2}, {0, 1}, {1, 2}, {0, 1},
+	{1, 2}, {0, 1}, {0, 1}, {0, 1},
+	{1, 2}, {0, 1}, {0, 1}, {0, 1},
+	{1, 2}, {0, 1}, {0, 1}, {1, 2},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static const int armada_38x_cpu_ddr_ratios[32][2] __initconst = {
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+	{1, 2}, {0, 1}, {0, 1}, {0, 1},
+	{1, 2}, {0, 1}, {0, 1}, {0, 1},
+	{1, 2}, {0, 1}, {0, 1}, {0, 1},
+	{1, 2}, {0, 1}, {0, 1}, {7, 15},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static void __init armada_38x_get_clk_ratio(
+	void __iomem *sar, int id, int *mult, int *div)
+{
+	u32 opt = ((readl(sar) >> SAR_A380_CPU_DDR_L2_FREQ_OPT) &
+		SAR_A380_CPU_DDR_L2_FREQ_OPT_MASK);
+
+	switch (id) {
+	case A380_CPU_TO_L2:
+		*mult = armada_38x_cpu_l2_ratios[opt][0];
+		*div = armada_38x_cpu_l2_ratios[opt][1];
+		break;
+	case A380_CPU_TO_DDR:
+		*mult = armada_38x_cpu_ddr_ratios[opt][0];
+		*div = armada_38x_cpu_ddr_ratios[opt][1];
+		break;
+	}
+}
+
+static const struct coreclk_soc_desc armada_38x_coreclks = {
+	.get_tclk_freq = armada_38x_get_tclk_freq,
+	.get_cpu_freq = armada_38x_get_cpu_freq,
+	.get_clk_ratio = armada_38x_get_clk_ratio,
+	.ratios = armada_38x_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(armada_38x_coreclk_ratios),
+};
+
+static void __init armada_38x_coreclk_init(struct device_node *np)
+{
+	mvebu_coreclk_setup(np, &armada_38x_coreclks);
+}
+CLK_OF_DECLARE(armada_38x_core_clk, "marvell,armada-380-core-clock",
+	       armada_38x_coreclk_init);
+
+/*
+ * Clock Gating Control
+ */
+static const struct clk_gating_soc_desc armada_38x_gating_desc[] __initconst = {
+	{ "audio", NULL, 0 },
+	{ "ge2", NULL, 2 },
+	{ "ge1", NULL, 3 },
+	{ "ge0", NULL, 4 },
+	{ "pex1", NULL, 5 },
+	{ "pex2", NULL, 6 },
+	{ "pex3", NULL, 7 },
+	{ "pex0", NULL, 8 },
+	{ "usb3h0", NULL, 9 },
+	{ "usb3h1", NULL, 10 },
+	{ "usb3d", NULL, 11 },
+	{ "bm", NULL, 13 },
+	{ "crypto0z", NULL, 14 },
+	{ "sata0", NULL, 15 },
+	{ "crypto1z", NULL, 16 },
+	{ "sdio", NULL, 17 },
+	{ "usb2", NULL, 18 },
+	{ "crypto1", NULL, 21 },
+	{ "xor0", NULL, 22 },
+	{ "crypto0", NULL, 23 },
+	{ "tdm", NULL, 25 },
+	{ "xor1", NULL, 28 },
+	{ "sata1", NULL, 30 },
+	{ }
+};
+
+static void __init armada_38x_clk_gating_init(struct device_node *np)
+{
+	mvebu_clk_gating_setup(np, armada_38x_gating_desc);
+}
+CLK_OF_DECLARE(armada_38x_clk_gating, "marvell,armada-380-gating-clock",
+	       armada_38x_clk_gating_init);
diff --git a/drivers/clk/mvebu/armada-39x.c b/drivers/clk/mvebu/armada-39x.c
new file mode 100644
index 000000000..674ccfd62
--- /dev/null
+++ b/drivers/clk/mvebu/armada-39x.c
@@ -0,0 +1,156 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Armada 39x SoC clocks
+ *
+ * Copyright (C) 2015 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include "common.h"
+
+/*
+ * SARL[14:10] : Ratios between CPU, NBCLK, HCLK and DCLK.
+ *
+ * SARL[15]    : TCLK frequency
+ *		 0 = 250 MHz
+ *		 1 = 200 MHz
+ *
+ * SARH[0]     : Reference clock frequency
+ *               0 = 25 Mhz
+ *               1 = 40 Mhz
+ */
+
+#define SARL 					0
+#define  SARL_A390_TCLK_FREQ_OPT		15
+#define  SARL_A390_TCLK_FREQ_OPT_MASK		0x1
+#define  SARL_A390_CPU_DDR_L2_FREQ_OPT		10
+#define  SARL_A390_CPU_DDR_L2_FREQ_OPT_MASK	0x1F
+#define SARH					4
+#define  SARH_A390_REFCLK_FREQ			BIT(0)
+
+static const u32 armada_39x_tclk_frequencies[] __initconst = {
+	250000000,
+	200000000,
+};
+
+static u32 __init armada_39x_get_tclk_freq(void __iomem *sar)
+{
+	u8 tclk_freq_select;
+
+	tclk_freq_select = ((readl(sar + SARL) >> SARL_A390_TCLK_FREQ_OPT) &
+			    SARL_A390_TCLK_FREQ_OPT_MASK);
+	return armada_39x_tclk_frequencies[tclk_freq_select];
+}
+
+static const u32 armada_39x_cpu_frequencies[] __initconst = {
+	[0x0] = 666 * 1000 * 1000,
+	[0x2] = 800 * 1000 * 1000,
+	[0x3] = 800 * 1000 * 1000,
+	[0x4] = 1066 * 1000 * 1000,
+	[0x5] = 1066 * 1000 * 1000,
+	[0x6] = 1200 * 1000 * 1000,
+	[0x8] = 1332 * 1000 * 1000,
+	[0xB] = 1600 * 1000 * 1000,
+	[0xC] = 1600 * 1000 * 1000,
+	[0x12] = 1800 * 1000 * 1000,
+	[0x1E] = 1800 * 1000 * 1000,
+};
+
+static u32 __init armada_39x_get_cpu_freq(void __iomem *sar)
+{
+	u8 cpu_freq_select;
+
+	cpu_freq_select = ((readl(sar + SARL) >> SARL_A390_CPU_DDR_L2_FREQ_OPT) &
+			   SARL_A390_CPU_DDR_L2_FREQ_OPT_MASK);
+	if (cpu_freq_select >= ARRAY_SIZE(armada_39x_cpu_frequencies)) {
+		pr_err("Selected CPU frequency (%d) unsupported\n",
+			cpu_freq_select);
+		return 0;
+	}
+
+	return armada_39x_cpu_frequencies[cpu_freq_select];
+}
+
+enum { A390_CPU_TO_NBCLK, A390_CPU_TO_HCLK, A390_CPU_TO_DCLK };
+
+static const struct coreclk_ratio armada_39x_coreclk_ratios[] __initconst = {
+	{ .id = A390_CPU_TO_NBCLK, .name = "nbclk" },
+	{ .id = A390_CPU_TO_HCLK, .name = "hclk" },
+	{ .id = A390_CPU_TO_DCLK, .name = "dclk" },
+};
+
+static void __init armada_39x_get_clk_ratio(
+	void __iomem *sar, int id, int *mult, int *div)
+{
+	switch (id) {
+	case A390_CPU_TO_NBCLK:
+		*mult = 1;
+		*div = 2;
+		break;
+	case A390_CPU_TO_HCLK:
+		*mult = 1;
+		*div = 4;
+		break;
+	case A390_CPU_TO_DCLK:
+		*mult = 1;
+		*div = 2;
+		break;
+	}
+}
+
+static u32 __init armada_39x_refclk_ratio(void __iomem *sar)
+{
+	if (readl(sar + SARH) & SARH_A390_REFCLK_FREQ)
+		return 40 * 1000 * 1000;
+	else
+		return 25 * 1000 * 1000;
+}
+
+static const struct coreclk_soc_desc armada_39x_coreclks = {
+	.get_tclk_freq = armada_39x_get_tclk_freq,
+	.get_cpu_freq = armada_39x_get_cpu_freq,
+	.get_clk_ratio = armada_39x_get_clk_ratio,
+	.get_refclk_freq = armada_39x_refclk_ratio,
+	.ratios = armada_39x_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(armada_39x_coreclk_ratios),
+};
+
+static void __init armada_39x_coreclk_init(struct device_node *np)
+{
+	mvebu_coreclk_setup(np, &armada_39x_coreclks);
+}
+CLK_OF_DECLARE(armada_39x_core_clk, "marvell,armada-390-core-clock",
+	       armada_39x_coreclk_init);
+
+/*
+ * Clock Gating Control
+ */
+static const struct clk_gating_soc_desc armada_39x_gating_desc[] __initconst = {
+	{ "pex1", NULL, 5 },
+	{ "pex2", NULL, 6 },
+	{ "pex3", NULL, 7 },
+	{ "pex0", NULL, 8 },
+	{ "usb3h0", NULL, 9 },
+	{ "usb3h1", NULL, 10 },
+	{ "sata0", NULL, 15 },
+	{ "sdio", NULL, 17 },
+	{ "xor0", NULL, 22 },
+	{ "xor1", NULL, 28 },
+	{ }
+};
+
+static void __init armada_39x_clk_gating_init(struct device_node *np)
+{
+	mvebu_clk_gating_setup(np, armada_39x_gating_desc);
+}
+CLK_OF_DECLARE(armada_39x_clk_gating, "marvell,armada-390-gating-clock",
+	       armada_39x_clk_gating_init);
diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c
new file mode 100644
index 000000000..45665655a
--- /dev/null
+++ b/drivers/clk/mvebu/armada-xp.c
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Armada XP SoC clocks
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include "common.h"
+
+/*
+ * Core Clocks
+ *
+ * Armada XP Sample At Reset is a 64 bit bitfiled split in two
+ * register of 32 bits
+ */
+
+#define SARL				0	/* Low part [0:31] */
+#define	 SARL_AXP_PCLK_FREQ_OPT		21
+#define	 SARL_AXP_PCLK_FREQ_OPT_MASK	0x7
+#define	 SARL_AXP_FAB_FREQ_OPT		24
+#define	 SARL_AXP_FAB_FREQ_OPT_MASK	0xF
+#define SARH				4	/* High part [32:63] */
+#define	 SARH_AXP_PCLK_FREQ_OPT		(52-32)
+#define	 SARH_AXP_PCLK_FREQ_OPT_MASK	0x1
+#define	 SARH_AXP_PCLK_FREQ_OPT_SHIFT	3
+#define	 SARH_AXP_FAB_FREQ_OPT		(51-32)
+#define	 SARH_AXP_FAB_FREQ_OPT_MASK	0x1
+#define	 SARH_AXP_FAB_FREQ_OPT_SHIFT	4
+
+enum { AXP_CPU_TO_NBCLK, AXP_CPU_TO_HCLK, AXP_CPU_TO_DRAMCLK };
+
+static const struct coreclk_ratio axp_coreclk_ratios[] __initconst = {
+	{ .id = AXP_CPU_TO_NBCLK, .name = "nbclk" },
+	{ .id = AXP_CPU_TO_HCLK, .name = "hclk" },
+	{ .id = AXP_CPU_TO_DRAMCLK, .name = "dramclk" },
+};
+
+/* Armada XP TCLK frequency is fixed to 250MHz */
+static u32 __init axp_get_tclk_freq(void __iomem *sar)
+{
+	return 250000000;
+}
+
+static const u32 axp_cpu_freqs[] __initconst = {
+	1000000000,
+	1066000000,
+	1200000000,
+	1333000000,
+	1500000000,
+	1666000000,
+	1800000000,
+	2000000000,
+	667000000,
+	0,
+	800000000,
+	1600000000,
+};
+
+static u32 __init axp_get_cpu_freq(void __iomem *sar)
+{
+	u32 cpu_freq;
+	u8 cpu_freq_select = 0;
+
+	cpu_freq_select = ((readl(sar + SARL) >> SARL_AXP_PCLK_FREQ_OPT) &
+			   SARL_AXP_PCLK_FREQ_OPT_MASK);
+	/*
+	 * The upper bit is not contiguous to the other ones and
+	 * located in the high part of the SAR registers
+	 */
+	cpu_freq_select |= (((readl(sar + SARH) >> SARH_AXP_PCLK_FREQ_OPT) &
+	     SARH_AXP_PCLK_FREQ_OPT_MASK) << SARH_AXP_PCLK_FREQ_OPT_SHIFT);
+	if (cpu_freq_select >= ARRAY_SIZE(axp_cpu_freqs)) {
+		pr_err("CPU freq select unsupported: %d\n", cpu_freq_select);
+		cpu_freq = 0;
+	} else
+		cpu_freq = axp_cpu_freqs[cpu_freq_select];
+
+	return cpu_freq;
+}
+
+static const int axp_nbclk_ratios[32][2] __initconst = {
+	{0, 1}, {1, 2}, {2, 2}, {2, 2},
+	{1, 2}, {1, 2}, {1, 1}, {2, 3},
+	{0, 1}, {1, 2}, {2, 4}, {0, 1},
+	{1, 2}, {0, 1}, {0, 1}, {2, 2},
+	{0, 1}, {0, 1}, {0, 1}, {1, 1},
+	{2, 3}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {1, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static const int axp_hclk_ratios[32][2] __initconst = {
+	{0, 1}, {1, 2}, {2, 6}, {2, 3},
+	{1, 3}, {1, 4}, {1, 2}, {2, 6},
+	{0, 1}, {1, 6}, {2, 10}, {0, 1},
+	{1, 4}, {0, 1}, {0, 1}, {2, 5},
+	{0, 1}, {0, 1}, {0, 1}, {1, 2},
+	{2, 6}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {1, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static const int axp_dramclk_ratios[32][2] __initconst = {
+	{0, 1}, {1, 2}, {2, 3}, {2, 3},
+	{1, 3}, {1, 2}, {1, 2}, {2, 6},
+	{0, 1}, {1, 3}, {2, 5}, {0, 1},
+	{1, 4}, {0, 1}, {0, 1}, {2, 5},
+	{0, 1}, {0, 1}, {0, 1}, {1, 1},
+	{2, 3}, {0, 1}, {0, 1}, {0, 1},
+	{0, 1}, {0, 1}, {0, 1}, {1, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static void __init axp_get_clk_ratio(
+	void __iomem *sar, int id, int *mult, int *div)
+{
+	u32 opt = ((readl(sar + SARL) >> SARL_AXP_FAB_FREQ_OPT) &
+	      SARL_AXP_FAB_FREQ_OPT_MASK);
+	/*
+	 * The upper bit is not contiguous to the other ones and
+	 * located in the high part of the SAR registers
+	 */
+	opt |= (((readl(sar + SARH) >> SARH_AXP_FAB_FREQ_OPT) &
+		 SARH_AXP_FAB_FREQ_OPT_MASK) << SARH_AXP_FAB_FREQ_OPT_SHIFT);
+
+	switch (id) {
+	case AXP_CPU_TO_NBCLK:
+		*mult = axp_nbclk_ratios[opt][0];
+		*div = axp_nbclk_ratios[opt][1];
+		break;
+	case AXP_CPU_TO_HCLK:
+		*mult = axp_hclk_ratios[opt][0];
+		*div = axp_hclk_ratios[opt][1];
+		break;
+	case AXP_CPU_TO_DRAMCLK:
+		*mult = axp_dramclk_ratios[opt][0];
+		*div = axp_dramclk_ratios[opt][1];
+		break;
+	}
+}
+
+static const struct coreclk_soc_desc axp_coreclks = {
+	.get_tclk_freq = axp_get_tclk_freq,
+	.get_cpu_freq = axp_get_cpu_freq,
+	.get_clk_ratio = axp_get_clk_ratio,
+	.ratios = axp_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(axp_coreclk_ratios),
+};
+
+/*
+ * Clock Gating Control
+ */
+
+static const struct clk_gating_soc_desc axp_gating_desc[] __initconst = {
+	{ "audio", NULL, 0, 0 },
+	{ "ge3", NULL, 1, 0 },
+	{ "ge2", NULL,  2, 0 },
+	{ "ge1", NULL, 3, 0 },
+	{ "ge0", NULL, 4, 0 },
+	{ "pex00", NULL, 5, 0 },
+	{ "pex01", NULL, 6, 0 },
+	{ "pex02", NULL, 7, 0 },
+	{ "pex03", NULL, 8, 0 },
+	{ "pex10", NULL, 9, 0 },
+	{ "pex11", NULL, 10, 0 },
+	{ "pex12", NULL, 11, 0 },
+	{ "pex13", NULL, 12, 0 },
+	{ "bp", NULL, 13, 0 },
+	{ "sata0lnk", NULL, 14, 0 },
+	{ "sata0", "sata0lnk", 15, 0 },
+	{ "lcd", NULL, 16, 0 },
+	{ "sdio", NULL, 17, 0 },
+	{ "usb0", NULL, 18, 0 },
+	{ "usb1", NULL, 19, 0 },
+	{ "usb2", NULL, 20, 0 },
+	{ "xor0", NULL, 22, 0 },
+	{ "crypto", NULL, 23, 0 },
+	{ "tdm", NULL, 25, 0 },
+	{ "pex20", NULL, 26, 0 },
+	{ "pex30", NULL, 27, 0 },
+	{ "xor1", NULL, 28, 0 },
+	{ "sata1lnk", NULL, 29, 0 },
+	{ "sata1", "sata1lnk", 30, 0 },
+	{ }
+};
+
+static void __init axp_clk_init(struct device_node *np)
+{
+	struct device_node *cgnp =
+		of_find_compatible_node(NULL, NULL, "marvell,armada-xp-gating-clock");
+
+	mvebu_coreclk_setup(np, &axp_coreclks);
+
+	if (cgnp) {
+		mvebu_clk_gating_setup(cgnp, axp_gating_desc);
+		of_node_put(cgnp);
+	}
+}
+CLK_OF_DECLARE(axp_clk, "marvell,armada-xp-core-clock", axp_clk_init);
diff --git a/drivers/clk/mvebu/armada_ap_cp_helper.c b/drivers/clk/mvebu/armada_ap_cp_helper.c
new file mode 100644
index 000000000..6a930f697
--- /dev/null
+++ b/drivers/clk/mvebu/armada_ap_cp_helper.c
@@ -0,0 +1,30 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Marvell Armada AP and CP110 helper
+ *
+ * Copyright (C) 2018 Marvell
+ *
+ * Gregory Clement <gregory.clement@bootlin.com>
+ *
+ */
+
+#include "armada_ap_cp_helper.h"
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+char *ap_cp_unique_name(struct device *dev, struct device_node *np,
+			const char *name)
+{
+	const __be32 *reg;
+	u64 addr;
+
+	/* Do not create a name if there is no clock */
+	if (!name)
+		return NULL;
+
+	reg = of_get_property(np, "reg", NULL);
+	addr = of_translate_address(np, reg);
+	return devm_kasprintf(dev, GFP_KERNEL, "%llx-%s",
+			      (unsigned long long)addr, name);
+}
diff --git a/drivers/clk/mvebu/armada_ap_cp_helper.h b/drivers/clk/mvebu/armada_ap_cp_helper.h
new file mode 100644
index 000000000..810af1e5d
--- /dev/null
+++ b/drivers/clk/mvebu/armada_ap_cp_helper.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __ARMADA_AP_CP_HELPER_H
+#define __ARMADA_AP_CP_HELPER_H
+
+struct device;
+struct device_node;
+
+char *ap_cp_unique_name(struct device *dev, struct device_node *np,
+			const char *name);
+#endif
diff --git a/drivers/clk/mvebu/clk-corediv.c b/drivers/clk/mvebu/clk-corediv.c
new file mode 100644
index 000000000..818b17539
--- /dev/null
+++ b/drivers/clk/mvebu/clk-corediv.c
@@ -0,0 +1,337 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MVEBU Core divider clock
+ *
+ * Copyright (C) 2013 Marvell
+ *
+ * Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include "common.h"
+
+#define CORE_CLK_DIV_RATIO_MASK		0xff
+
+/*
+ * This structure describes the hardware details (bit offset and mask)
+ * to configure one particular core divider clock. Those hardware
+ * details may differ from one SoC to another. This structure is
+ * therefore typically instantiated statically to describe the
+ * hardware details.
+ */
+struct clk_corediv_desc {
+	unsigned int mask;
+	unsigned int offset;
+	unsigned int fieldbit;
+};
+
+/*
+ * This structure describes the hardware details to configure the core
+ * divider clocks on a given SoC. Amongst others, it points to the
+ * array of core divider clock descriptors for this SoC, as well as
+ * the corresponding operations to manipulate them.
+ */
+struct clk_corediv_soc_desc {
+	const struct clk_corediv_desc *descs;
+	unsigned int ndescs;
+	const struct clk_ops ops;
+	u32 ratio_reload;
+	u32 enable_bit_offset;
+	u32 ratio_offset;
+};
+
+/*
+ * This structure represents one core divider clock for the clock
+ * framework, and is dynamically allocated for each core divider clock
+ * existing in the current SoC.
+ */
+struct clk_corediv {
+	struct clk_hw hw;
+	void __iomem *reg;
+	const struct clk_corediv_desc *desc;
+	const struct clk_corediv_soc_desc *soc_desc;
+	spinlock_t lock;
+};
+
+static struct clk_onecell_data clk_data;
+
+/*
+ * Description of the core divider clocks available. For now, we
+ * support only NAND, and it is available at the same register
+ * locations regardless of the SoC.
+ */
+static const struct clk_corediv_desc mvebu_corediv_desc[] = {
+	{ .mask = 0x3f, .offset = 8, .fieldbit = 1 }, /* NAND clock */
+};
+
+static const struct clk_corediv_desc mv98dx3236_corediv_desc[] = {
+	{ .mask = 0x0f, .offset = 6, .fieldbit = 27 }, /* NAND clock */
+};
+
+#define to_corediv_clk(p) container_of(p, struct clk_corediv, hw)
+
+static int clk_corediv_is_enabled(struct clk_hw *hwclk)
+{
+	struct clk_corediv *corediv = to_corediv_clk(hwclk);
+	const struct clk_corediv_soc_desc *soc_desc = corediv->soc_desc;
+	const struct clk_corediv_desc *desc = corediv->desc;
+	u32 enable_mask = BIT(desc->fieldbit) << soc_desc->enable_bit_offset;
+
+	return !!(readl(corediv->reg) & enable_mask);
+}
+
+static int clk_corediv_enable(struct clk_hw *hwclk)
+{
+	struct clk_corediv *corediv = to_corediv_clk(hwclk);
+	const struct clk_corediv_soc_desc *soc_desc = corediv->soc_desc;
+	const struct clk_corediv_desc *desc = corediv->desc;
+	unsigned long flags = 0;
+	u32 reg;
+
+	spin_lock_irqsave(&corediv->lock, flags);
+
+	reg = readl(corediv->reg);
+	reg |= (BIT(desc->fieldbit) << soc_desc->enable_bit_offset);
+	writel(reg, corediv->reg);
+
+	spin_unlock_irqrestore(&corediv->lock, flags);
+
+	return 0;
+}
+
+static void clk_corediv_disable(struct clk_hw *hwclk)
+{
+	struct clk_corediv *corediv = to_corediv_clk(hwclk);
+	const struct clk_corediv_soc_desc *soc_desc = corediv->soc_desc;
+	const struct clk_corediv_desc *desc = corediv->desc;
+	unsigned long flags = 0;
+	u32 reg;
+
+	spin_lock_irqsave(&corediv->lock, flags);
+
+	reg = readl(corediv->reg);
+	reg &= ~(BIT(desc->fieldbit) << soc_desc->enable_bit_offset);
+	writel(reg, corediv->reg);
+
+	spin_unlock_irqrestore(&corediv->lock, flags);
+}
+
+static unsigned long clk_corediv_recalc_rate(struct clk_hw *hwclk,
+					 unsigned long parent_rate)
+{
+	struct clk_corediv *corediv = to_corediv_clk(hwclk);
+	const struct clk_corediv_soc_desc *soc_desc = corediv->soc_desc;
+	const struct clk_corediv_desc *desc = corediv->desc;
+	u32 reg, div;
+
+	reg = readl(corediv->reg + soc_desc->ratio_offset);
+	div = (reg >> desc->offset) & desc->mask;
+	return parent_rate / div;
+}
+
+static long clk_corediv_round_rate(struct clk_hw *hwclk, unsigned long rate,
+			       unsigned long *parent_rate)
+{
+	/* Valid ratio are 1:4, 1:5, 1:6 and 1:8 */
+	u32 div;
+
+	div = *parent_rate / rate;
+	if (div < 4)
+		div = 4;
+	else if (div > 6)
+		div = 8;
+
+	return *parent_rate / div;
+}
+
+static int clk_corediv_set_rate(struct clk_hw *hwclk, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	struct clk_corediv *corediv = to_corediv_clk(hwclk);
+	const struct clk_corediv_soc_desc *soc_desc = corediv->soc_desc;
+	const struct clk_corediv_desc *desc = corediv->desc;
+	unsigned long flags = 0;
+	u32 reg, div;
+
+	div = parent_rate / rate;
+
+	spin_lock_irqsave(&corediv->lock, flags);
+
+	/* Write new divider to the divider ratio register */
+	reg = readl(corediv->reg + soc_desc->ratio_offset);
+	reg &= ~(desc->mask << desc->offset);
+	reg |= (div & desc->mask) << desc->offset;
+	writel(reg, corediv->reg + soc_desc->ratio_offset);
+
+	/* Set reload-force for this clock */
+	reg = readl(corediv->reg) | BIT(desc->fieldbit);
+	writel(reg, corediv->reg);
+
+	/* Now trigger the clock update */
+	reg = readl(corediv->reg) | soc_desc->ratio_reload;
+	writel(reg, corediv->reg);
+
+	/*
+	 * Wait for clocks to settle down, and then clear all the
+	 * ratios request and the reload request.
+	 */
+	udelay(1000);
+	reg &= ~(CORE_CLK_DIV_RATIO_MASK | soc_desc->ratio_reload);
+	writel(reg, corediv->reg);
+	udelay(1000);
+
+	spin_unlock_irqrestore(&corediv->lock, flags);
+
+	return 0;
+}
+
+static const struct clk_corediv_soc_desc armada370_corediv_soc = {
+	.descs = mvebu_corediv_desc,
+	.ndescs = ARRAY_SIZE(mvebu_corediv_desc),
+	.ops = {
+		.enable = clk_corediv_enable,
+		.disable = clk_corediv_disable,
+		.is_enabled = clk_corediv_is_enabled,
+		.recalc_rate = clk_corediv_recalc_rate,
+		.round_rate = clk_corediv_round_rate,
+		.set_rate = clk_corediv_set_rate,
+	},
+	.ratio_reload = BIT(8),
+	.enable_bit_offset = 24,
+	.ratio_offset = 0x8,
+};
+
+static const struct clk_corediv_soc_desc armada380_corediv_soc = {
+	.descs = mvebu_corediv_desc,
+	.ndescs = ARRAY_SIZE(mvebu_corediv_desc),
+	.ops = {
+		.enable = clk_corediv_enable,
+		.disable = clk_corediv_disable,
+		.is_enabled = clk_corediv_is_enabled,
+		.recalc_rate = clk_corediv_recalc_rate,
+		.round_rate = clk_corediv_round_rate,
+		.set_rate = clk_corediv_set_rate,
+	},
+	.ratio_reload = BIT(8),
+	.enable_bit_offset = 16,
+	.ratio_offset = 0x4,
+};
+
+static const struct clk_corediv_soc_desc armada375_corediv_soc = {
+	.descs = mvebu_corediv_desc,
+	.ndescs = ARRAY_SIZE(mvebu_corediv_desc),
+	.ops = {
+		.recalc_rate = clk_corediv_recalc_rate,
+		.round_rate = clk_corediv_round_rate,
+		.set_rate = clk_corediv_set_rate,
+	},
+	.ratio_reload = BIT(8),
+	.ratio_offset = 0x4,
+};
+
+static const struct clk_corediv_soc_desc mv98dx3236_corediv_soc = {
+	.descs = mv98dx3236_corediv_desc,
+	.ndescs = ARRAY_SIZE(mv98dx3236_corediv_desc),
+	.ops = {
+		.recalc_rate = clk_corediv_recalc_rate,
+		.round_rate = clk_corediv_round_rate,
+		.set_rate = clk_corediv_set_rate,
+	},
+	.ratio_reload = BIT(10),
+	.ratio_offset = 0x8,
+};
+
+static void __init
+mvebu_corediv_clk_init(struct device_node *node,
+		       const struct clk_corediv_soc_desc *soc_desc)
+{
+	struct clk_init_data init;
+	struct clk_corediv *corediv;
+	struct clk **clks;
+	void __iomem *base;
+	const char *parent_name;
+	const char *clk_name;
+	int i;
+
+	base = of_iomap(node, 0);
+	if (WARN_ON(!base))
+		return;
+
+	parent_name = of_clk_get_parent_name(node, 0);
+
+	clk_data.clk_num = soc_desc->ndescs;
+
+	/* clks holds the clock array */
+	clks = kcalloc(clk_data.clk_num, sizeof(struct clk *),
+				GFP_KERNEL);
+	if (WARN_ON(!clks))
+		goto err_unmap;
+	/* corediv holds the clock specific array */
+	corediv = kcalloc(clk_data.clk_num, sizeof(struct clk_corediv),
+				GFP_KERNEL);
+	if (WARN_ON(!corediv))
+		goto err_free_clks;
+
+	spin_lock_init(&corediv->lock);
+
+	for (i = 0; i < clk_data.clk_num; i++) {
+		of_property_read_string_index(node, "clock-output-names",
+					      i, &clk_name);
+		init.num_parents = 1;
+		init.parent_names = &parent_name;
+		init.name = clk_name;
+		init.ops = &soc_desc->ops;
+		init.flags = 0;
+
+		corediv[i].soc_desc = soc_desc;
+		corediv[i].desc = soc_desc->descs + i;
+		corediv[i].reg = base;
+		corediv[i].hw.init = &init;
+
+		clks[i] = clk_register(NULL, &corediv[i].hw);
+		WARN_ON(IS_ERR(clks[i]));
+	}
+
+	clk_data.clks = clks;
+	of_clk_add_provider(node, of_clk_src_onecell_get, &clk_data);
+	return;
+
+err_free_clks:
+	kfree(clks);
+err_unmap:
+	iounmap(base);
+}
+
+static void __init armada370_corediv_clk_init(struct device_node *node)
+{
+	return mvebu_corediv_clk_init(node, &armada370_corediv_soc);
+}
+CLK_OF_DECLARE(armada370_corediv_clk, "marvell,armada-370-corediv-clock",
+	       armada370_corediv_clk_init);
+
+static void __init armada375_corediv_clk_init(struct device_node *node)
+{
+	return mvebu_corediv_clk_init(node, &armada375_corediv_soc);
+}
+CLK_OF_DECLARE(armada375_corediv_clk, "marvell,armada-375-corediv-clock",
+	       armada375_corediv_clk_init);
+
+static void __init armada380_corediv_clk_init(struct device_node *node)
+{
+	return mvebu_corediv_clk_init(node, &armada380_corediv_soc);
+}
+CLK_OF_DECLARE(armada380_corediv_clk, "marvell,armada-380-corediv-clock",
+	       armada380_corediv_clk_init);
+
+static void __init mv98dx3236_corediv_clk_init(struct device_node *node)
+{
+	return mvebu_corediv_clk_init(node, &mv98dx3236_corediv_soc);
+}
+CLK_OF_DECLARE(mv98dx3236_corediv_clk, "marvell,mv98dx3236-corediv-clock",
+	       mv98dx3236_corediv_clk_init);
diff --git a/drivers/clk/mvebu/clk-cpu.c b/drivers/clk/mvebu/clk-cpu.c
new file mode 100644
index 000000000..c2af3395c
--- /dev/null
+++ b/drivers/clk/mvebu/clk-cpu.c
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell MVEBU CPU clock handling.
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/delay.h>
+#include <linux/mvebu-pmsu.h>
+#include <asm/smp_plat.h>
+
+#define SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET               0x0
+#define   SYS_CTRL_CLK_DIVIDER_CTRL_RESET_ALL          0xff
+#define   SYS_CTRL_CLK_DIVIDER_CTRL_RESET_SHIFT        8
+#define SYS_CTRL_CLK_DIVIDER_CTRL2_OFFSET              0x8
+#define   SYS_CTRL_CLK_DIVIDER_CTRL2_NBCLK_RATIO_SHIFT 16
+#define SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET              0xC
+#define SYS_CTRL_CLK_DIVIDER_MASK                      0x3F
+
+#define PMU_DFS_RATIO_SHIFT 16
+#define PMU_DFS_RATIO_MASK  0x3F
+
+#define MAX_CPU	    4
+struct cpu_clk {
+	struct clk_hw hw;
+	int cpu;
+	const char *clk_name;
+	const char *parent_name;
+	void __iomem *reg_base;
+	void __iomem *pmu_dfs;
+};
+
+static struct clk **clks;
+
+static struct clk_onecell_data clk_data;
+
+#define to_cpu_clk(p) container_of(p, struct cpu_clk, hw)
+
+static unsigned long clk_cpu_recalc_rate(struct clk_hw *hwclk,
+					 unsigned long parent_rate)
+{
+	struct cpu_clk *cpuclk = to_cpu_clk(hwclk);
+	u32 reg, div;
+
+	reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET);
+	div = (reg >> (cpuclk->cpu * 8)) & SYS_CTRL_CLK_DIVIDER_MASK;
+	return parent_rate / div;
+}
+
+static long clk_cpu_round_rate(struct clk_hw *hwclk, unsigned long rate,
+			       unsigned long *parent_rate)
+{
+	/* Valid ratio are 1:1, 1:2 and 1:3 */
+	u32 div;
+
+	div = *parent_rate / rate;
+	if (div == 0)
+		div = 1;
+	else if (div > 3)
+		div = 3;
+
+	return *parent_rate / div;
+}
+
+static int clk_cpu_off_set_rate(struct clk_hw *hwclk, unsigned long rate,
+				unsigned long parent_rate)
+
+{
+	struct cpu_clk *cpuclk = to_cpu_clk(hwclk);
+	u32 reg, div;
+	u32 reload_mask;
+
+	div = parent_rate / rate;
+	reg = (readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET)
+		& (~(SYS_CTRL_CLK_DIVIDER_MASK << (cpuclk->cpu * 8))))
+		| (div << (cpuclk->cpu * 8));
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_VALUE_OFFSET);
+	/* Set clock divider reload smooth bit mask */
+	reload_mask = 1 << (20 + cpuclk->cpu);
+
+	reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET)
+	    | reload_mask;
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+
+	/* Now trigger the clock update */
+	reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET)
+	    | 1 << 24;
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+
+	/* Wait for clocks to settle down then clear reload request */
+	udelay(1000);
+	reg &= ~(reload_mask | 1 << 24);
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+	udelay(1000);
+
+	return 0;
+}
+
+static int clk_cpu_on_set_rate(struct clk_hw *hwclk, unsigned long rate,
+			       unsigned long parent_rate)
+{
+	u32 reg;
+	unsigned long fabric_div, target_div, cur_rate;
+	struct cpu_clk *cpuclk = to_cpu_clk(hwclk);
+
+	/*
+	 * PMU DFS registers are not mapped, Device Tree does not
+	 * describes them. We cannot change the frequency dynamically.
+	 */
+	if (!cpuclk->pmu_dfs)
+		return -ENODEV;
+
+	cur_rate = clk_hw_get_rate(hwclk);
+
+	reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL2_OFFSET);
+	fabric_div = (reg >> SYS_CTRL_CLK_DIVIDER_CTRL2_NBCLK_RATIO_SHIFT) &
+		SYS_CTRL_CLK_DIVIDER_MASK;
+
+	/* Frequency is going up */
+	if (rate == 2 * cur_rate)
+		target_div = fabric_div / 2;
+	/* Frequency is going down */
+	else
+		target_div = fabric_div;
+
+	if (target_div == 0)
+		target_div = 1;
+
+	reg = readl(cpuclk->pmu_dfs);
+	reg &= ~(PMU_DFS_RATIO_MASK << PMU_DFS_RATIO_SHIFT);
+	reg |= (target_div << PMU_DFS_RATIO_SHIFT);
+	writel(reg, cpuclk->pmu_dfs);
+
+	reg = readl(cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+	reg |= (SYS_CTRL_CLK_DIVIDER_CTRL_RESET_ALL <<
+		SYS_CTRL_CLK_DIVIDER_CTRL_RESET_SHIFT);
+	writel(reg, cpuclk->reg_base + SYS_CTRL_CLK_DIVIDER_CTRL_OFFSET);
+
+	return mvebu_pmsu_dfs_request(cpuclk->cpu);
+}
+
+static int clk_cpu_set_rate(struct clk_hw *hwclk, unsigned long rate,
+			    unsigned long parent_rate)
+{
+	if (__clk_is_enabled(hwclk->clk))
+		return clk_cpu_on_set_rate(hwclk, rate, parent_rate);
+	else
+		return clk_cpu_off_set_rate(hwclk, rate, parent_rate);
+}
+
+static const struct clk_ops cpu_ops = {
+	.recalc_rate = clk_cpu_recalc_rate,
+	.round_rate = clk_cpu_round_rate,
+	.set_rate = clk_cpu_set_rate,
+};
+
+static void __init of_cpu_clk_setup(struct device_node *node)
+{
+	struct cpu_clk *cpuclk;
+	void __iomem *clock_complex_base = of_iomap(node, 0);
+	void __iomem *pmu_dfs_base = of_iomap(node, 1);
+	int ncpus = 0;
+	struct device_node *dn;
+
+	if (clock_complex_base == NULL) {
+		pr_err("%s: clock-complex base register not set\n",
+			__func__);
+		return;
+	}
+
+	if (pmu_dfs_base == NULL)
+		pr_warn("%s: pmu-dfs base register not set, dynamic frequency scaling not available\n",
+			__func__);
+
+	for_each_of_cpu_node(dn)
+		ncpus++;
+
+	cpuclk = kcalloc(ncpus, sizeof(*cpuclk), GFP_KERNEL);
+	if (WARN_ON(!cpuclk))
+		goto cpuclk_out;
+
+	clks = kcalloc(ncpus, sizeof(*clks), GFP_KERNEL);
+	if (WARN_ON(!clks))
+		goto clks_out;
+
+	for_each_of_cpu_node(dn) {
+		struct clk_init_data init;
+		struct clk *clk;
+		char *clk_name = kzalloc(5, GFP_KERNEL);
+		int cpu, err;
+
+		if (WARN_ON(!clk_name))
+			goto bail_out;
+
+		err = of_property_read_u32(dn, "reg", &cpu);
+		if (WARN_ON(err))
+			goto bail_out;
+
+		sprintf(clk_name, "cpu%d", cpu);
+
+		cpuclk[cpu].parent_name = of_clk_get_parent_name(node, 0);
+		cpuclk[cpu].clk_name = clk_name;
+		cpuclk[cpu].cpu = cpu;
+		cpuclk[cpu].reg_base = clock_complex_base;
+		if (pmu_dfs_base)
+			cpuclk[cpu].pmu_dfs = pmu_dfs_base + 4 * cpu;
+		cpuclk[cpu].hw.init = &init;
+
+		init.name = cpuclk[cpu].clk_name;
+		init.ops = &cpu_ops;
+		init.flags = 0;
+		init.parent_names = &cpuclk[cpu].parent_name;
+		init.num_parents = 1;
+
+		clk = clk_register(NULL, &cpuclk[cpu].hw);
+		if (WARN_ON(IS_ERR(clk)))
+			goto bail_out;
+		clks[cpu] = clk;
+	}
+	clk_data.clk_num = MAX_CPU;
+	clk_data.clks = clks;
+	of_clk_add_provider(node, of_clk_src_onecell_get, &clk_data);
+
+	return;
+bail_out:
+	kfree(clks);
+	while(ncpus--)
+		kfree(cpuclk[ncpus].clk_name);
+clks_out:
+	kfree(cpuclk);
+cpuclk_out:
+	iounmap(clock_complex_base);
+}
+
+CLK_OF_DECLARE(armada_xp_cpu_clock, "marvell,armada-xp-cpu-clock",
+					 of_cpu_clk_setup);
+
+static void __init of_mv98dx3236_cpu_clk_setup(struct device_node *node)
+{
+	of_clk_add_provider(node, of_clk_src_simple_get, NULL);
+}
+
+CLK_OF_DECLARE(mv98dx3236_cpu_clock, "marvell,mv98dx3236-cpu-clock",
+					 of_mv98dx3236_cpu_clk_setup);
diff --git a/drivers/clk/mvebu/common.c b/drivers/clk/mvebu/common.c
new file mode 100644
index 000000000..785dbede4
--- /dev/null
+++ b/drivers/clk/mvebu/common.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell EBU SoC common clock handling
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
+
+#include "common.h"
+
+/*
+ * Core Clocks
+ */
+
+#define SSCG_CONF_MODE(reg)	(((reg) >> 16) & 0x3)
+#define SSCG_SPREAD_DOWN	0x0
+#define SSCG_SPREAD_UP		0x1
+#define SSCG_SPREAD_CENTRAL	0x2
+#define SSCG_CONF_LOW(reg)	(((reg) >> 8) & 0xFF)
+#define SSCG_CONF_HIGH(reg)	((reg) & 0xFF)
+
+static struct clk_onecell_data clk_data;
+
+/*
+ * This function can be used by the Kirkwood, the Armada 370, the
+ * Armada XP and the Armada 375 SoC. The name of the function was
+ * chosen following the dt convention: using the first known SoC
+ * compatible with it.
+ */
+u32 kirkwood_fix_sscg_deviation(u32 system_clk)
+{
+	struct device_node *sscg_np = NULL;
+	void __iomem *sscg_map;
+	u32 sscg_reg;
+	s32 low_bound, high_bound;
+	u64 freq_swing_half;
+
+	sscg_np = of_find_node_by_name(NULL, "sscg");
+	if (sscg_np == NULL) {
+		pr_err("cannot get SSCG register node\n");
+		return system_clk;
+	}
+
+	sscg_map = of_iomap(sscg_np, 0);
+	if (sscg_map == NULL) {
+		pr_err("cannot map SSCG register\n");
+		goto out;
+	}
+
+	sscg_reg = readl(sscg_map);
+	high_bound = SSCG_CONF_HIGH(sscg_reg);
+	low_bound = SSCG_CONF_LOW(sscg_reg);
+
+	if ((high_bound - low_bound) <= 0)
+		goto out;
+	/*
+	 * From Marvell engineer we got the following formula (when
+	 * this code was written, the datasheet was erroneous)
+	 * Spread percentage = 1/96 * (H - L) / H
+	 * H = SSCG_High_Boundary
+	 * L = SSCG_Low_Boundary
+	 *
+	 * As the deviation is half of spread then it lead to the
+	 * following formula in the code.
+	 *
+	 * To avoid an overflow and not lose any significant digit in
+	 * the same time we have to use a 64 bit integer.
+	 */
+
+	freq_swing_half = (((u64)high_bound - (u64)low_bound)
+			* (u64)system_clk);
+	do_div(freq_swing_half, (2 * 96 * high_bound));
+
+	switch (SSCG_CONF_MODE(sscg_reg)) {
+	case SSCG_SPREAD_DOWN:
+		system_clk -= freq_swing_half;
+		break;
+	case SSCG_SPREAD_UP:
+		system_clk += freq_swing_half;
+		break;
+	case SSCG_SPREAD_CENTRAL:
+	default:
+		break;
+	}
+
+	iounmap(sscg_map);
+
+out:
+	of_node_put(sscg_np);
+
+	return system_clk;
+}
+
+void __init mvebu_coreclk_setup(struct device_node *np,
+				const struct coreclk_soc_desc *desc)
+{
+	const char *tclk_name = "tclk";
+	const char *cpuclk_name = "cpuclk";
+	void __iomem *base;
+	unsigned long rate;
+	int n;
+
+	base = of_iomap(np, 0);
+	if (WARN_ON(!base))
+		return;
+
+	/* Allocate struct for TCLK, cpu clk, and core ratio clocks */
+	clk_data.clk_num = 2 + desc->num_ratios;
+
+	/* One more clock for the optional refclk */
+	if (desc->get_refclk_freq)
+		clk_data.clk_num += 1;
+
+	clk_data.clks = kcalloc(clk_data.clk_num, sizeof(*clk_data.clks),
+				GFP_KERNEL);
+	if (WARN_ON(!clk_data.clks)) {
+		iounmap(base);
+		return;
+	}
+
+	/* Register TCLK */
+	of_property_read_string_index(np, "clock-output-names", 0,
+				      &tclk_name);
+	rate = desc->get_tclk_freq(base);
+	clk_data.clks[0] = clk_register_fixed_rate(NULL, tclk_name, NULL, 0,
+						   rate);
+	WARN_ON(IS_ERR(clk_data.clks[0]));
+
+	/* Register CPU clock */
+	of_property_read_string_index(np, "clock-output-names", 1,
+				      &cpuclk_name);
+	rate = desc->get_cpu_freq(base);
+
+	if (desc->is_sscg_enabled && desc->fix_sscg_deviation
+		&& desc->is_sscg_enabled(base))
+		rate = desc->fix_sscg_deviation(rate);
+
+	clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, 0,
+						   rate);
+	WARN_ON(IS_ERR(clk_data.clks[1]));
+
+	/* Register fixed-factor clocks derived from CPU clock */
+	for (n = 0; n < desc->num_ratios; n++) {
+		const char *rclk_name = desc->ratios[n].name;
+		int mult, div;
+
+		of_property_read_string_index(np, "clock-output-names",
+					      2+n, &rclk_name);
+		desc->get_clk_ratio(base, desc->ratios[n].id, &mult, &div);
+		clk_data.clks[2+n] = clk_register_fixed_factor(NULL, rclk_name,
+				       cpuclk_name, 0, mult, div);
+		WARN_ON(IS_ERR(clk_data.clks[2+n]));
+	}
+
+	/* Register optional refclk */
+	if (desc->get_refclk_freq) {
+		const char *name = "refclk";
+		of_property_read_string_index(np, "clock-output-names",
+					      2 + desc->num_ratios, &name);
+		rate = desc->get_refclk_freq(base);
+		clk_data.clks[2 + desc->num_ratios] =
+			clk_register_fixed_rate(NULL, name, NULL, 0, rate);
+		WARN_ON(IS_ERR(clk_data.clks[2 + desc->num_ratios]));
+	}
+
+	/* SAR register isn't needed anymore */
+	iounmap(base);
+
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data);
+}
+
+/*
+ * Clock Gating Control
+ */
+
+DEFINE_SPINLOCK(ctrl_gating_lock);
+
+struct clk_gating_ctrl {
+	spinlock_t *lock;
+	struct clk **gates;
+	int num_gates;
+	void __iomem *base;
+	u32 saved_reg;
+};
+
+static struct clk_gating_ctrl *ctrl;
+
+static struct clk *clk_gating_get_src(
+	struct of_phandle_args *clkspec, void *data)
+{
+	int n;
+
+	if (clkspec->args_count < 1)
+		return ERR_PTR(-EINVAL);
+
+	for (n = 0; n < ctrl->num_gates; n++) {
+		struct clk_gate *gate =
+			to_clk_gate(__clk_get_hw(ctrl->gates[n]));
+		if (clkspec->args[0] == gate->bit_idx)
+			return ctrl->gates[n];
+	}
+	return ERR_PTR(-ENODEV);
+}
+
+static int mvebu_clk_gating_suspend(void)
+{
+	ctrl->saved_reg = readl(ctrl->base);
+	return 0;
+}
+
+static void mvebu_clk_gating_resume(void)
+{
+	writel(ctrl->saved_reg, ctrl->base);
+}
+
+static struct syscore_ops clk_gate_syscore_ops = {
+	.suspend = mvebu_clk_gating_suspend,
+	.resume = mvebu_clk_gating_resume,
+};
+
+void __init mvebu_clk_gating_setup(struct device_node *np,
+				   const struct clk_gating_soc_desc *desc)
+{
+	struct clk *clk;
+	void __iomem *base;
+	const char *default_parent = NULL;
+	int n;
+
+	if (ctrl) {
+		pr_err("mvebu-clk-gating: cannot instantiate more than one gateable clock device\n");
+		return;
+	}
+
+	base = of_iomap(np, 0);
+	if (WARN_ON(!base))
+		return;
+
+	clk = of_clk_get(np, 0);
+	if (!IS_ERR(clk)) {
+		default_parent = __clk_get_name(clk);
+		clk_put(clk);
+	}
+
+	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
+	if (WARN_ON(!ctrl))
+		goto ctrl_out;
+
+	/* lock must already be initialized */
+	ctrl->lock = &ctrl_gating_lock;
+
+	ctrl->base = base;
+
+	/* Count, allocate, and register clock gates */
+	for (n = 0; desc[n].name;)
+		n++;
+
+	ctrl->num_gates = n;
+	ctrl->gates = kcalloc(ctrl->num_gates, sizeof(*ctrl->gates),
+			      GFP_KERNEL);
+	if (WARN_ON(!ctrl->gates))
+		goto gates_out;
+
+	for (n = 0; n < ctrl->num_gates; n++) {
+		const char *parent =
+			(desc[n].parent) ? desc[n].parent : default_parent;
+		ctrl->gates[n] = clk_register_gate(NULL, desc[n].name, parent,
+					desc[n].flags, base, desc[n].bit_idx,
+					0, ctrl->lock);
+		WARN_ON(IS_ERR(ctrl->gates[n]));
+	}
+
+	of_clk_add_provider(np, clk_gating_get_src, ctrl);
+
+	register_syscore_ops(&clk_gate_syscore_ops);
+
+	return;
+gates_out:
+	kfree(ctrl);
+ctrl_out:
+	iounmap(base);
+}
diff --git a/drivers/clk/mvebu/common.h b/drivers/clk/mvebu/common.h
new file mode 100644
index 000000000..d1ab79b43
--- /dev/null
+++ b/drivers/clk/mvebu/common.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Marvell EBU SoC common clock handling
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ */
+
+#ifndef __CLK_MVEBU_COMMON_H_
+#define __CLK_MVEBU_COMMON_H_
+
+#include <linux/kernel.h>
+
+extern spinlock_t ctrl_gating_lock;
+
+struct device_node;
+
+struct coreclk_ratio {
+	int id;
+	const char *name;
+};
+
+struct coreclk_soc_desc {
+	u32 (*get_tclk_freq)(void __iomem *sar);
+	u32 (*get_cpu_freq)(void __iomem *sar);
+	void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div);
+	u32 (*get_refclk_freq)(void __iomem *sar);
+	bool (*is_sscg_enabled)(void __iomem *sar);
+	u32 (*fix_sscg_deviation)(u32 system_clk);
+	const struct coreclk_ratio *ratios;
+	int num_ratios;
+};
+
+struct clk_gating_soc_desc {
+	const char *name;
+	const char *parent;
+	int bit_idx;
+	unsigned long flags;
+};
+
+void __init mvebu_coreclk_setup(struct device_node *np,
+				const struct coreclk_soc_desc *desc);
+
+void __init mvebu_clk_gating_setup(struct device_node *np,
+				   const struct clk_gating_soc_desc *desc);
+
+/*
+ * This function is shared among the Kirkwood, Armada 370, Armada XP
+ * and Armada 375 SoC
+ */
+u32 kirkwood_fix_sscg_deviation(u32 system_clk);
+#endif
diff --git a/drivers/clk/mvebu/cp110-system-controller.c b/drivers/clk/mvebu/cp110-system-controller.c
new file mode 100644
index 000000000..84c890054
--- /dev/null
+++ b/drivers/clk/mvebu/cp110-system-controller.c
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Armada CP110 System Controller
+ *
+ * Copyright (C) 2016 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+/*
+ * CP110 has 6 core clocks:
+ *
+ *  - PLL0		(1 Ghz)
+ *    - PPv2 core	(1/3 PLL0)
+ *    - x2 Core		(1/2 PLL0)
+ *	- Core		(1/2 x2 Core)
+ *    - SDIO		(2/5 PLL0)
+ *
+ *  - NAND clock, which is either:
+ *    - Equal to SDIO clock
+ *    - 2/5 PLL0
+ *
+ * CP110 has 32 gateable clocks, for the various peripherals in the IP.
+ */
+
+#define pr_fmt(fmt) "cp110-system-controller: " fmt
+
+#include "armada_ap_cp_helper.h"
+#include <linux/clk-provider.h>
+#include <linux/mfd/syscon.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define CP110_PM_CLOCK_GATING_REG	0x220
+#define CP110_NAND_FLASH_CLK_CTRL_REG	0x700
+#define    NF_CLOCK_SEL_400_MASK	BIT(0)
+
+enum {
+	CP110_CLK_TYPE_CORE,
+	CP110_CLK_TYPE_GATABLE,
+};
+
+#define CP110_MAX_CORE_CLOCKS		6
+#define CP110_MAX_GATABLE_CLOCKS	32
+
+#define CP110_CLK_NUM \
+	(CP110_MAX_CORE_CLOCKS + CP110_MAX_GATABLE_CLOCKS)
+
+#define CP110_CORE_PLL0			0
+#define CP110_CORE_PPV2			1
+#define CP110_CORE_X2CORE		2
+#define CP110_CORE_CORE			3
+#define CP110_CORE_NAND			4
+#define CP110_CORE_SDIO			5
+
+/* A number of gateable clocks need special handling */
+#define CP110_GATE_AUDIO		0
+#define CP110_GATE_COMM_UNIT		1
+#define CP110_GATE_NAND			2
+#define CP110_GATE_PPV2			3
+#define CP110_GATE_SDIO			4
+#define CP110_GATE_MG			5
+#define CP110_GATE_MG_CORE		6
+#define CP110_GATE_XOR1			7
+#define CP110_GATE_XOR0			8
+#define CP110_GATE_GOP_DP		9
+#define CP110_GATE_PCIE_X1_0		11
+#define CP110_GATE_PCIE_X1_1		12
+#define CP110_GATE_PCIE_X4		13
+#define CP110_GATE_PCIE_XOR		14
+#define CP110_GATE_SATA			15
+#define CP110_GATE_SATA_USB		16
+#define CP110_GATE_MAIN			17
+#define CP110_GATE_SDMMC_GOP		18
+#define CP110_GATE_SLOW_IO		21
+#define CP110_GATE_USB3H0		22
+#define CP110_GATE_USB3H1		23
+#define CP110_GATE_USB3DEV		24
+#define CP110_GATE_EIP150		25
+#define CP110_GATE_EIP197		26
+
+static const char * const gate_base_names[] = {
+	[CP110_GATE_AUDIO]	= "audio",
+	[CP110_GATE_COMM_UNIT]	= "communit",
+	[CP110_GATE_NAND]	= "nand",
+	[CP110_GATE_PPV2]	= "ppv2",
+	[CP110_GATE_SDIO]	= "sdio",
+	[CP110_GATE_MG]		= "mg-domain",
+	[CP110_GATE_MG_CORE]	= "mg-core",
+	[CP110_GATE_XOR1]	= "xor1",
+	[CP110_GATE_XOR0]	= "xor0",
+	[CP110_GATE_GOP_DP]	= "gop-dp",
+	[CP110_GATE_PCIE_X1_0]	= "pcie_x10",
+	[CP110_GATE_PCIE_X1_1]	= "pcie_x11",
+	[CP110_GATE_PCIE_X4]	= "pcie_x4",
+	[CP110_GATE_PCIE_XOR]	= "pcie-xor",
+	[CP110_GATE_SATA]	= "sata",
+	[CP110_GATE_SATA_USB]	= "sata-usb",
+	[CP110_GATE_MAIN]	= "main",
+	[CP110_GATE_SDMMC_GOP]	= "sd-mmc-gop",
+	[CP110_GATE_SLOW_IO]	= "slow-io",
+	[CP110_GATE_USB3H0]	= "usb3h0",
+	[CP110_GATE_USB3H1]	= "usb3h1",
+	[CP110_GATE_USB3DEV]	= "usb3dev",
+	[CP110_GATE_EIP150]	= "eip150",
+	[CP110_GATE_EIP197]	= "eip197"
+};
+
+struct cp110_gate_clk {
+	struct clk_hw hw;
+	struct regmap *regmap;
+	u8 bit_idx;
+};
+
+#define to_cp110_gate_clk(hw) container_of(hw, struct cp110_gate_clk, hw)
+
+static int cp110_gate_enable(struct clk_hw *hw)
+{
+	struct cp110_gate_clk *gate = to_cp110_gate_clk(hw);
+
+	regmap_update_bits(gate->regmap, CP110_PM_CLOCK_GATING_REG,
+			   BIT(gate->bit_idx), BIT(gate->bit_idx));
+
+	return 0;
+}
+
+static void cp110_gate_disable(struct clk_hw *hw)
+{
+	struct cp110_gate_clk *gate = to_cp110_gate_clk(hw);
+
+	regmap_update_bits(gate->regmap, CP110_PM_CLOCK_GATING_REG,
+			   BIT(gate->bit_idx), 0);
+}
+
+static int cp110_gate_is_enabled(struct clk_hw *hw)
+{
+	struct cp110_gate_clk *gate = to_cp110_gate_clk(hw);
+	u32 val;
+
+	regmap_read(gate->regmap, CP110_PM_CLOCK_GATING_REG, &val);
+
+	return val & BIT(gate->bit_idx);
+}
+
+static const struct clk_ops cp110_gate_ops = {
+	.enable = cp110_gate_enable,
+	.disable = cp110_gate_disable,
+	.is_enabled = cp110_gate_is_enabled,
+};
+
+static struct clk_hw *cp110_register_gate(const char *name,
+					  const char *parent_name,
+					  struct regmap *regmap, u8 bit_idx)
+{
+	struct cp110_gate_clk *gate;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret;
+
+	gate = kzalloc(sizeof(*gate), GFP_KERNEL);
+	if (!gate)
+		return ERR_PTR(-ENOMEM);
+
+	memset(&init, 0, sizeof(init));
+
+	init.name = name;
+	init.ops = &cp110_gate_ops;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	gate->regmap = regmap;
+	gate->bit_idx = bit_idx;
+	gate->hw.init = &init;
+
+	hw = &gate->hw;
+	ret = clk_hw_register(NULL, hw);
+	if (ret) {
+		kfree(gate);
+		hw = ERR_PTR(ret);
+	}
+
+	return hw;
+}
+
+static void cp110_unregister_gate(struct clk_hw *hw)
+{
+	clk_hw_unregister(hw);
+	kfree(to_cp110_gate_clk(hw));
+}
+
+static struct clk_hw *cp110_of_clk_get(struct of_phandle_args *clkspec,
+				       void *data)
+{
+	struct clk_hw_onecell_data *clk_data = data;
+	unsigned int type = clkspec->args[0];
+	unsigned int idx = clkspec->args[1];
+
+	if (type == CP110_CLK_TYPE_CORE) {
+		if (idx >= CP110_MAX_CORE_CLOCKS)
+			return ERR_PTR(-EINVAL);
+		return clk_data->hws[idx];
+	} else if (type == CP110_CLK_TYPE_GATABLE) {
+		if (idx >= CP110_MAX_GATABLE_CLOCKS)
+			return ERR_PTR(-EINVAL);
+		return clk_data->hws[CP110_MAX_CORE_CLOCKS + idx];
+	}
+
+	return ERR_PTR(-EINVAL);
+}
+
+static int cp110_syscon_common_probe(struct platform_device *pdev,
+				     struct device_node *syscon_node)
+{
+	struct regmap *regmap;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const char *ppv2_name, *pll0_name, *core_name, *x2core_name, *nand_name,
+		*sdio_name;
+	struct clk_hw_onecell_data *cp110_clk_data;
+	struct clk_hw *hw, **cp110_clks;
+	u32 nand_clk_ctrl;
+	int i, ret;
+	char *gate_name[ARRAY_SIZE(gate_base_names)];
+
+	regmap = syscon_node_to_regmap(syscon_node);
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	ret = regmap_read(regmap, CP110_NAND_FLASH_CLK_CTRL_REG,
+			  &nand_clk_ctrl);
+	if (ret)
+		return ret;
+
+	cp110_clk_data = devm_kzalloc(dev, struct_size(cp110_clk_data, hws,
+						       CP110_CLK_NUM),
+				      GFP_KERNEL);
+	if (!cp110_clk_data)
+		return -ENOMEM;
+
+	cp110_clks = cp110_clk_data->hws;
+	cp110_clk_data->num = CP110_CLK_NUM;
+
+	/* Register the PLL0 which is the root of the hw tree */
+	pll0_name = ap_cp_unique_name(dev, syscon_node, "pll0");
+	hw = clk_hw_register_fixed_rate(NULL, pll0_name, NULL, 0,
+					1000 * 1000 * 1000);
+	if (IS_ERR(hw)) {
+		ret = PTR_ERR(hw);
+		goto fail_pll0;
+	}
+
+	cp110_clks[CP110_CORE_PLL0] = hw;
+
+	/* PPv2 is PLL0/3 */
+	ppv2_name = ap_cp_unique_name(dev, syscon_node, "ppv2-core");
+	hw = clk_hw_register_fixed_factor(NULL, ppv2_name, pll0_name, 0, 1, 3);
+	if (IS_ERR(hw)) {
+		ret = PTR_ERR(hw);
+		goto fail_ppv2;
+	}
+
+	cp110_clks[CP110_CORE_PPV2] = hw;
+
+	/* X2CORE clock is PLL0/2 */
+	x2core_name = ap_cp_unique_name(dev, syscon_node, "x2core");
+	hw = clk_hw_register_fixed_factor(NULL, x2core_name, pll0_name,
+					  0, 1, 2);
+	if (IS_ERR(hw)) {
+		ret = PTR_ERR(hw);
+		goto fail_eip;
+	}
+
+	cp110_clks[CP110_CORE_X2CORE] = hw;
+
+	/* Core clock is X2CORE/2 */
+	core_name = ap_cp_unique_name(dev, syscon_node, "core");
+	hw = clk_hw_register_fixed_factor(NULL, core_name, x2core_name,
+					  0, 1, 2);
+	if (IS_ERR(hw)) {
+		ret = PTR_ERR(hw);
+		goto fail_core;
+	}
+
+	cp110_clks[CP110_CORE_CORE] = hw;
+	/* NAND can be either PLL0/2.5 or core clock */
+	nand_name = ap_cp_unique_name(dev, syscon_node, "nand-core");
+	if (nand_clk_ctrl & NF_CLOCK_SEL_400_MASK)
+		hw = clk_hw_register_fixed_factor(NULL, nand_name,
+						   pll0_name, 0, 2, 5);
+	else
+		hw = clk_hw_register_fixed_factor(NULL, nand_name,
+						   core_name, 0, 1, 1);
+	if (IS_ERR(hw)) {
+		ret = PTR_ERR(hw);
+		goto fail_nand;
+	}
+
+	cp110_clks[CP110_CORE_NAND] = hw;
+
+	/* SDIO clock is PLL0/2.5 */
+	sdio_name = ap_cp_unique_name(dev, syscon_node, "sdio-core");
+	hw = clk_hw_register_fixed_factor(NULL, sdio_name,
+					  pll0_name, 0, 2, 5);
+	if (IS_ERR(hw)) {
+		ret = PTR_ERR(hw);
+		goto fail_sdio;
+	}
+
+	cp110_clks[CP110_CORE_SDIO] = hw;
+
+	/* create the unique name for all the gate clocks */
+	for (i = 0; i < ARRAY_SIZE(gate_base_names); i++)
+		gate_name[i] =	ap_cp_unique_name(dev, syscon_node,
+						  gate_base_names[i]);
+
+	for (i = 0; i < ARRAY_SIZE(gate_base_names); i++) {
+		const char *parent;
+
+		if (gate_name[i] == NULL)
+			continue;
+
+		switch (i) {
+		case CP110_GATE_NAND:
+			parent = nand_name;
+			break;
+		case CP110_GATE_MG:
+		case CP110_GATE_GOP_DP:
+		case CP110_GATE_PPV2:
+			parent = ppv2_name;
+			break;
+		case CP110_GATE_SDIO:
+			parent = sdio_name;
+			break;
+		case CP110_GATE_MAIN:
+		case CP110_GATE_PCIE_XOR:
+		case CP110_GATE_PCIE_X4:
+		case CP110_GATE_EIP150:
+		case CP110_GATE_EIP197:
+			parent = x2core_name;
+			break;
+		default:
+			parent = core_name;
+			break;
+		}
+		hw = cp110_register_gate(gate_name[i], parent, regmap, i);
+
+		if (IS_ERR(hw)) {
+			ret = PTR_ERR(hw);
+			goto fail_gate;
+		}
+
+		cp110_clks[CP110_MAX_CORE_CLOCKS + i] = hw;
+	}
+
+	ret = of_clk_add_hw_provider(np, cp110_of_clk_get, cp110_clk_data);
+	if (ret)
+		goto fail_clk_add;
+
+	platform_set_drvdata(pdev, cp110_clks);
+
+	return 0;
+
+fail_clk_add:
+fail_gate:
+	for (i = 0; i < CP110_MAX_GATABLE_CLOCKS; i++) {
+		hw = cp110_clks[CP110_MAX_CORE_CLOCKS + i];
+
+		if (hw)
+			cp110_unregister_gate(hw);
+	}
+
+	clk_hw_unregister_fixed_factor(cp110_clks[CP110_CORE_SDIO]);
+fail_sdio:
+	clk_hw_unregister_fixed_factor(cp110_clks[CP110_CORE_NAND]);
+fail_nand:
+	clk_hw_unregister_fixed_factor(cp110_clks[CP110_CORE_CORE]);
+fail_core:
+	clk_hw_unregister_fixed_factor(cp110_clks[CP110_CORE_X2CORE]);
+fail_eip:
+	clk_hw_unregister_fixed_factor(cp110_clks[CP110_CORE_PPV2]);
+fail_ppv2:
+	clk_hw_unregister_fixed_rate(cp110_clks[CP110_CORE_PLL0]);
+fail_pll0:
+	return ret;
+}
+
+static int cp110_syscon_legacy_clk_probe(struct platform_device *pdev)
+{
+	dev_warn(&pdev->dev, FW_WARN "Using legacy device tree binding\n");
+	dev_warn(&pdev->dev, FW_WARN "Update your device tree:\n");
+	dev_warn(&pdev->dev, FW_WARN
+		 "This binding won't be supported in future kernels\n");
+
+	return cp110_syscon_common_probe(pdev, pdev->dev.of_node);
+}
+
+static int cp110_clk_probe(struct platform_device *pdev)
+{
+	return cp110_syscon_common_probe(pdev, pdev->dev.of_node->parent);
+}
+
+static const struct of_device_id cp110_syscon_legacy_of_match[] = {
+	{ .compatible = "marvell,cp110-system-controller0", },
+	{ }
+};
+
+static struct platform_driver cp110_syscon_legacy_driver = {
+	.probe = cp110_syscon_legacy_clk_probe,
+	.driver		= {
+		.name	= "marvell-cp110-system-controller0",
+		.of_match_table = cp110_syscon_legacy_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(cp110_syscon_legacy_driver);
+
+static const struct of_device_id cp110_clock_of_match[] = {
+	{ .compatible = "marvell,cp110-clock", },
+	{ }
+};
+
+static struct platform_driver cp110_clock_driver = {
+	.probe = cp110_clk_probe,
+	.driver		= {
+		.name	= "marvell-cp110-clock",
+		.of_match_table = cp110_clock_of_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(cp110_clock_driver);
diff --git a/drivers/clk/mvebu/dove-divider.c b/drivers/clk/mvebu/dove-divider.c
new file mode 100644
index 000000000..0a90452ee
--- /dev/null
+++ b/drivers/clk/mvebu/dove-divider.c
@@ -0,0 +1,262 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Dove PMU Core PLL divider driver
+ *
+ * Cleaned up by substantially rewriting, and converted to DT by
+ * Russell King.  Origin is not known.
+ */
+#include <linux/clk-provider.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+#include "dove-divider.h"
+
+struct dove_clk {
+	const char *name;
+	struct clk_hw hw;
+	void __iomem *base;
+	spinlock_t *lock;
+	u8 div_bit_start;
+	u8 div_bit_end;
+	u8 div_bit_load;
+	u8 div_bit_size;
+	u32 *divider_table;
+};
+
+enum {
+	DIV_CTRL0 = 0,
+	DIV_CTRL1 = 4,
+	DIV_CTRL1_N_RESET_MASK = BIT(10),
+};
+
+#define to_dove_clk(hw) container_of(hw, struct dove_clk, hw)
+
+static void dove_load_divider(void __iomem *base, u32 val, u32 mask, u32 load)
+{
+	u32 v;
+
+	v = readl_relaxed(base + DIV_CTRL1) | DIV_CTRL1_N_RESET_MASK;
+	writel_relaxed(v, base + DIV_CTRL1);
+
+	v = (readl_relaxed(base + DIV_CTRL0) & ~(mask | load)) | val;
+	writel_relaxed(v, base + DIV_CTRL0);
+	writel_relaxed(v | load, base + DIV_CTRL0);
+	ndelay(250);
+	writel_relaxed(v, base + DIV_CTRL0);
+}
+
+static unsigned int dove_get_divider(struct dove_clk *dc)
+{
+	unsigned int divider;
+	u32 val;
+
+	val = readl_relaxed(dc->base + DIV_CTRL0);
+	val >>= dc->div_bit_start;
+
+	divider = val & ~(~0 << dc->div_bit_size);
+
+	if (dc->divider_table)
+		divider = dc->divider_table[divider];
+
+	return divider;
+}
+
+static int dove_calc_divider(const struct dove_clk *dc, unsigned long rate,
+			     unsigned long parent_rate, bool set)
+{
+	unsigned int divider, max;
+
+	divider = DIV_ROUND_CLOSEST(parent_rate, rate);
+
+	if (dc->divider_table) {
+		unsigned int i;
+
+		for (i = 0; dc->divider_table[i]; i++)
+			if (divider == dc->divider_table[i]) {
+				divider = i;
+				break;
+			}
+
+		if (!dc->divider_table[i])
+			return -EINVAL;
+	} else {
+		max = 1 << dc->div_bit_size;
+
+		if (set && (divider == 0 || divider >= max))
+			return -EINVAL;
+		if (divider >= max)
+			divider = max - 1;
+		else if (divider == 0)
+			divider = 1;
+	}
+
+	return divider;
+}
+
+static unsigned long dove_recalc_rate(struct clk_hw *hw, unsigned long parent)
+{
+	struct dove_clk *dc = to_dove_clk(hw);
+	unsigned int divider = dove_get_divider(dc);
+	unsigned long rate = DIV_ROUND_CLOSEST(parent, divider);
+
+	pr_debug("%s(): %s divider=%u parent=%lu rate=%lu\n",
+		 __func__, dc->name, divider, parent, rate);
+
+	return rate;
+}
+
+static long dove_round_rate(struct clk_hw *hw, unsigned long rate,
+			    unsigned long *parent)
+{
+	struct dove_clk *dc = to_dove_clk(hw);
+	unsigned long parent_rate = *parent;
+	int divider;
+
+	divider = dove_calc_divider(dc, rate, parent_rate, false);
+	if (divider < 0)
+		return divider;
+
+	rate = DIV_ROUND_CLOSEST(parent_rate, divider);
+
+	pr_debug("%s(): %s divider=%u parent=%lu rate=%lu\n",
+		 __func__, dc->name, divider, parent_rate, rate);
+
+	return rate;
+}
+
+static int dove_set_clock(struct clk_hw *hw, unsigned long rate,
+			  unsigned long parent_rate)
+{
+	struct dove_clk *dc = to_dove_clk(hw);
+	u32 mask, load, div;
+	int divider;
+
+	divider = dove_calc_divider(dc, rate, parent_rate, true);
+	if (divider < 0)
+		return divider;
+
+	pr_debug("%s(): %s divider=%u parent=%lu rate=%lu\n",
+		 __func__, dc->name, divider, parent_rate, rate);
+
+	div = (u32)divider << dc->div_bit_start;
+	mask = ~(~0 << dc->div_bit_size) << dc->div_bit_start;
+	load = BIT(dc->div_bit_load);
+
+	spin_lock(dc->lock);
+	dove_load_divider(dc->base, div, mask, load);
+	spin_unlock(dc->lock);
+
+	return 0;
+}
+
+static const struct clk_ops dove_divider_ops = {
+	.set_rate	= dove_set_clock,
+	.round_rate	= dove_round_rate,
+	.recalc_rate	= dove_recalc_rate,
+};
+
+static struct clk *clk_register_dove_divider(struct device *dev,
+	struct dove_clk *dc, const char **parent_names, size_t num_parents,
+	void __iomem *base)
+{
+	char name[32];
+	struct clk_init_data init = {
+		.name = name,
+		.ops = &dove_divider_ops,
+		.parent_names = parent_names,
+		.num_parents = num_parents,
+	};
+
+	strscpy(name, dc->name, sizeof(name));
+
+	dc->hw.init = &init;
+	dc->base = base;
+	dc->div_bit_size = dc->div_bit_end - dc->div_bit_start + 1;
+
+	return clk_register(dev, &dc->hw);
+}
+
+static DEFINE_SPINLOCK(dove_divider_lock);
+
+static u32 axi_divider[] = {-1, 2, 1, 3, 4, 6, 5, 7, 8, 10, 9, 0};
+
+static struct dove_clk dove_hw_clocks[4] = {
+	{
+		.name = "axi",
+		.lock = &dove_divider_lock,
+		.div_bit_start = 1,
+		.div_bit_end = 6,
+		.div_bit_load = 7,
+		.divider_table = axi_divider,
+	}, {
+		.name = "gpu",
+		.lock = &dove_divider_lock,
+		.div_bit_start = 8,
+		.div_bit_end = 13,
+		.div_bit_load = 14,
+	}, {
+		.name = "vmeta",
+		.lock = &dove_divider_lock,
+		.div_bit_start = 15,
+		.div_bit_end = 20,
+		.div_bit_load = 21,
+	}, {
+		.name = "lcd",
+		.lock = &dove_divider_lock,
+		.div_bit_start = 22,
+		.div_bit_end = 27,
+		.div_bit_load = 28,
+	},
+};
+
+static const char *core_pll[] = {
+	"core-pll",
+};
+
+static int dove_divider_init(struct device *dev, void __iomem *base,
+	struct clk **clks)
+{
+	struct clk *clk;
+	int i;
+
+	/*
+	 * Create the core PLL clock.  We treat this as a fixed rate
+	 * clock as we don't know any better, and documentation is sparse.
+	 */
+	clk = clk_register_fixed_rate(dev, core_pll[0], NULL, 0, 2000000000UL);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	for (i = 0; i < ARRAY_SIZE(dove_hw_clocks); i++)
+		clks[i] = clk_register_dove_divider(dev, &dove_hw_clocks[i],
+						    core_pll,
+						    ARRAY_SIZE(core_pll), base);
+
+	return 0;
+}
+
+static struct clk *dove_divider_clocks[4];
+
+static struct clk_onecell_data dove_divider_data = {
+	.clks = dove_divider_clocks,
+	.clk_num = ARRAY_SIZE(dove_divider_clocks),
+};
+
+void __init dove_divider_clk_init(struct device_node *np)
+{
+	void __iomem *base;
+
+	base = of_iomap(np, 0);
+	if (WARN_ON(!base))
+		return;
+
+	if (WARN_ON(dove_divider_init(NULL, base, dove_divider_clocks))) {
+		iounmap(base);
+		return;
+	}
+
+	of_clk_add_provider(np, of_clk_src_onecell_get, &dove_divider_data);
+}
diff --git a/drivers/clk/mvebu/dove-divider.h b/drivers/clk/mvebu/dove-divider.h
new file mode 100644
index 000000000..38ea37308
--- /dev/null
+++ b/drivers/clk/mvebu/dove-divider.h
@@ -0,0 +1,7 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef DOVE_DIVIDER_H
+#define DOVE_DIVIDER_H
+
+void __init dove_divider_clk_init(struct device_node *np);
+
+#endif
diff --git a/drivers/clk/mvebu/dove.c b/drivers/clk/mvebu/dove.c
new file mode 100644
index 000000000..0bd09d33f
--- /dev/null
+++ b/drivers/clk/mvebu/dove.c
@@ -0,0 +1,201 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Dove SoC clocks
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include "common.h"
+#include "dove-divider.h"
+
+/*
+ * Core Clocks
+ *
+ * Dove PLL sample-at-reset configuration
+ *
+ * SAR0[8:5]   : CPU frequency
+ *		 5  = 1000 MHz
+ *		 6  =  933 MHz
+ *		 7  =  933 MHz
+ *		 8  =  800 MHz
+ *		 9  =  800 MHz
+ *		 10 =  800 MHz
+ *		 11 = 1067 MHz
+ *		 12 =  667 MHz
+ *		 13 =  533 MHz
+ *		 14 =  400 MHz
+ *		 15 =  333 MHz
+ *		 others reserved.
+ *
+ * SAR0[11:9]  : CPU to L2 Clock divider ratio
+ *		 0 = (1/1) * CPU
+ *		 2 = (1/2) * CPU
+ *		 4 = (1/3) * CPU
+ *		 6 = (1/4) * CPU
+ *		 others reserved.
+ *
+ * SAR0[15:12] : CPU to DDR DRAM Clock divider ratio
+ *		 0  = (1/1) * CPU
+ *		 2  = (1/2) * CPU
+ *		 3  = (2/5) * CPU
+ *		 4  = (1/3) * CPU
+ *		 6  = (1/4) * CPU
+ *		 8  = (1/5) * CPU
+ *		 10 = (1/6) * CPU
+ *		 12 = (1/7) * CPU
+ *		 14 = (1/8) * CPU
+ *		 15 = (1/10) * CPU
+ *		 others reserved.
+ *
+ * SAR0[24:23] : TCLK frequency
+ *		 0 = 166 MHz
+ *		 1 = 125 MHz
+ *		 others reserved.
+ */
+
+#define SAR_DOVE_CPU_FREQ		5
+#define SAR_DOVE_CPU_FREQ_MASK		0xf
+#define SAR_DOVE_L2_RATIO		9
+#define SAR_DOVE_L2_RATIO_MASK		0x7
+#define SAR_DOVE_DDR_RATIO		12
+#define SAR_DOVE_DDR_RATIO_MASK		0xf
+#define SAR_DOVE_TCLK_FREQ		23
+#define SAR_DOVE_TCLK_FREQ_MASK		0x3
+
+enum { DOVE_CPU_TO_L2, DOVE_CPU_TO_DDR };
+
+static const struct coreclk_ratio dove_coreclk_ratios[] __initconst = {
+	{ .id = DOVE_CPU_TO_L2, .name = "l2clk", },
+	{ .id = DOVE_CPU_TO_DDR, .name = "ddrclk", }
+};
+
+static const u32 dove_tclk_freqs[] __initconst = {
+	166666667,
+	125000000,
+	0, 0
+};
+
+static u32 __init dove_get_tclk_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_DOVE_TCLK_FREQ) &
+		SAR_DOVE_TCLK_FREQ_MASK;
+	return dove_tclk_freqs[opt];
+}
+
+static const u32 dove_cpu_freqs[] __initconst = {
+	0, 0, 0, 0, 0,
+	1000000000,
+	933333333, 933333333,
+	800000000, 800000000, 800000000,
+	1066666667,
+	666666667,
+	533333333,
+	400000000,
+	333333333
+};
+
+static u32 __init dove_get_cpu_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_DOVE_CPU_FREQ) &
+		SAR_DOVE_CPU_FREQ_MASK;
+	return dove_cpu_freqs[opt];
+}
+
+static const int dove_cpu_l2_ratios[8][2] __initconst = {
+	{ 1, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 },
+	{ 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 }
+};
+
+static const int dove_cpu_ddr_ratios[16][2] __initconst = {
+	{ 1, 1 }, { 0, 1 }, { 1, 2 }, { 2, 5 },
+	{ 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 },
+	{ 1, 5 }, { 0, 1 }, { 1, 6 }, { 0, 1 },
+	{ 1, 7 }, { 0, 1 }, { 1, 8 }, { 1, 10 }
+};
+
+static void __init dove_get_clk_ratio(
+	void __iomem *sar, int id, int *mult, int *div)
+{
+	switch (id) {
+	case DOVE_CPU_TO_L2:
+	{
+		u32 opt = (readl(sar) >> SAR_DOVE_L2_RATIO) &
+			SAR_DOVE_L2_RATIO_MASK;
+		*mult = dove_cpu_l2_ratios[opt][0];
+		*div = dove_cpu_l2_ratios[opt][1];
+		break;
+	}
+	case DOVE_CPU_TO_DDR:
+	{
+		u32 opt = (readl(sar) >> SAR_DOVE_DDR_RATIO) &
+			SAR_DOVE_DDR_RATIO_MASK;
+		*mult = dove_cpu_ddr_ratios[opt][0];
+		*div = dove_cpu_ddr_ratios[opt][1];
+		break;
+	}
+	}
+}
+
+static const struct coreclk_soc_desc dove_coreclks = {
+	.get_tclk_freq = dove_get_tclk_freq,
+	.get_cpu_freq = dove_get_cpu_freq,
+	.get_clk_ratio = dove_get_clk_ratio,
+	.ratios = dove_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(dove_coreclk_ratios),
+};
+
+/*
+ * Clock Gating Control
+ */
+
+static const struct clk_gating_soc_desc dove_gating_desc[] __initconst = {
+	{ "usb0", NULL, 0, 0 },
+	{ "usb1", NULL, 1, 0 },
+	{ "ge",	"gephy", 2, 0 },
+	{ "sata", NULL, 3, 0 },
+	{ "pex0", NULL, 4, 0 },
+	{ "pex1", NULL, 5, 0 },
+	{ "sdio0", NULL, 8, 0 },
+	{ "sdio1", NULL, 9, 0 },
+	{ "nand", NULL, 10, 0 },
+	{ "camera", NULL, 11, 0 },
+	{ "i2s0", NULL, 12, 0 },
+	{ "i2s1", NULL, 13, 0 },
+	{ "crypto", NULL, 15, 0 },
+	{ "ac97", NULL, 21, 0 },
+	{ "pdma", NULL, 22, 0 },
+	{ "xor0", NULL, 23, 0 },
+	{ "xor1", NULL, 24, 0 },
+	{ "gephy", NULL, 30, 0 },
+	{ }
+};
+
+static void __init dove_clk_init(struct device_node *np)
+{
+	struct device_node *cgnp =
+		of_find_compatible_node(NULL, NULL, "marvell,dove-gating-clock");
+	struct device_node *ddnp =
+		of_find_compatible_node(NULL, NULL, "marvell,dove-divider-clock");
+
+	mvebu_coreclk_setup(np, &dove_coreclks);
+
+	if (ddnp) {
+		dove_divider_clk_init(ddnp);
+		of_node_put(ddnp);
+	}
+
+	if (cgnp) {
+		mvebu_clk_gating_setup(cgnp, dove_gating_desc);
+		of_node_put(cgnp);
+	}
+}
+CLK_OF_DECLARE(dove_clk, "marvell,dove-core-clock", dove_clk_init);
diff --git a/drivers/clk/mvebu/kirkwood.c b/drivers/clk/mvebu/kirkwood.c
new file mode 100644
index 000000000..8bc893df4
--- /dev/null
+++ b/drivers/clk/mvebu/kirkwood.c
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Kirkwood SoC clocks
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include "common.h"
+
+/*
+ * Core Clocks
+ *
+ * Kirkwood PLL sample-at-reset configuration
+ * (6180 has different SAR layout than other Kirkwood SoCs)
+ *
+ * SAR0[4:3,22,1] : CPU frequency (6281,6292,6282)
+ *	4  =  600 MHz
+ *	6  =  800 MHz
+ *	7  = 1000 MHz
+ *	9  = 1200 MHz
+ *	12 = 1500 MHz
+ *	13 = 1600 MHz
+ *	14 = 1800 MHz
+ *	15 = 2000 MHz
+ *	others reserved.
+ *
+ * SAR0[19,10:9] : CPU to L2 Clock divider ratio (6281,6292,6282)
+ *	1 = (1/2) * CPU
+ *	3 = (1/3) * CPU
+ *	5 = (1/4) * CPU
+ *	others reserved.
+ *
+ * SAR0[8:5] : CPU to DDR DRAM Clock divider ratio (6281,6292,6282)
+ *	2 = (1/2) * CPU
+ *	4 = (1/3) * CPU
+ *	6 = (1/4) * CPU
+ *	7 = (2/9) * CPU
+ *	8 = (1/5) * CPU
+ *	9 = (1/6) * CPU
+ *	others reserved.
+ *
+ * SAR0[4:2] : Kirkwood 6180 cpu/l2/ddr clock configuration (6180 only)
+ *	5 = [CPU =  600 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/3) * CPU]
+ *	6 = [CPU =  800 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/4) * CPU]
+ *	7 = [CPU = 1000 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/5) * CPU]
+ *	others reserved.
+ *
+ * SAR0[21] : TCLK frequency
+ *	0 = 200 MHz
+ *	1 = 166 MHz
+ *	others reserved.
+ */
+
+#define SAR_KIRKWOOD_CPU_FREQ(x)	\
+	(((x & (1 <<  1)) >>  1) |	\
+	 ((x & (1 << 22)) >> 21) |	\
+	 ((x & (3 <<  3)) >>  1))
+#define SAR_KIRKWOOD_L2_RATIO(x)	\
+	(((x & (3 <<  9)) >> 9) |	\
+	 (((x & (1 << 19)) >> 17)))
+#define SAR_KIRKWOOD_DDR_RATIO		5
+#define SAR_KIRKWOOD_DDR_RATIO_MASK	0xf
+#define SAR_MV88F6180_CLK		2
+#define SAR_MV88F6180_CLK_MASK		0x7
+#define SAR_KIRKWOOD_TCLK_FREQ		21
+#define SAR_KIRKWOOD_TCLK_FREQ_MASK	0x1
+
+enum { KIRKWOOD_CPU_TO_L2, KIRKWOOD_CPU_TO_DDR };
+
+static const struct coreclk_ratio kirkwood_coreclk_ratios[] __initconst = {
+	{ .id = KIRKWOOD_CPU_TO_L2, .name = "l2clk", },
+	{ .id = KIRKWOOD_CPU_TO_DDR, .name = "ddrclk", }
+};
+
+static u32 __init kirkwood_get_tclk_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_KIRKWOOD_TCLK_FREQ) &
+		SAR_KIRKWOOD_TCLK_FREQ_MASK;
+	return (opt) ? 166666667 : 200000000;
+}
+
+static const u32 kirkwood_cpu_freqs[] __initconst = {
+	0, 0, 0, 0,
+	600000000,
+	0,
+	800000000,
+	1000000000,
+	0,
+	1200000000,
+	0, 0,
+	1500000000,
+	1600000000,
+	1800000000,
+	2000000000
+};
+
+static u32 __init kirkwood_get_cpu_freq(void __iomem *sar)
+{
+	u32 opt = SAR_KIRKWOOD_CPU_FREQ(readl(sar));
+	return kirkwood_cpu_freqs[opt];
+}
+
+static const int kirkwood_cpu_l2_ratios[8][2] __initconst = {
+	{ 0, 1 }, { 1, 2 }, { 0, 1 }, { 1, 3 },
+	{ 0, 1 }, { 1, 4 }, { 0, 1 }, { 0, 1 }
+};
+
+static const int kirkwood_cpu_ddr_ratios[16][2] __initconst = {
+	{ 0, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 },
+	{ 1, 3 }, { 0, 1 }, { 1, 4 }, { 2, 9 },
+	{ 1, 5 }, { 1, 6 }, { 0, 1 }, { 0, 1 },
+	{ 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 }
+};
+
+static void __init kirkwood_get_clk_ratio(
+	void __iomem *sar, int id, int *mult, int *div)
+{
+	switch (id) {
+	case KIRKWOOD_CPU_TO_L2:
+	{
+		u32 opt = SAR_KIRKWOOD_L2_RATIO(readl(sar));
+		*mult = kirkwood_cpu_l2_ratios[opt][0];
+		*div = kirkwood_cpu_l2_ratios[opt][1];
+		break;
+	}
+	case KIRKWOOD_CPU_TO_DDR:
+	{
+		u32 opt = (readl(sar) >> SAR_KIRKWOOD_DDR_RATIO) &
+			SAR_KIRKWOOD_DDR_RATIO_MASK;
+		*mult = kirkwood_cpu_ddr_ratios[opt][0];
+		*div = kirkwood_cpu_ddr_ratios[opt][1];
+		break;
+	}
+	}
+}
+
+static const u32 mv88f6180_cpu_freqs[] __initconst = {
+	0, 0, 0, 0, 0,
+	600000000,
+	800000000,
+	1000000000
+};
+
+static u32 __init mv88f6180_get_cpu_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & SAR_MV88F6180_CLK_MASK;
+	return mv88f6180_cpu_freqs[opt];
+}
+
+static const int mv88f6180_cpu_ddr_ratios[8][2] __initconst = {
+	{ 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 },
+	{ 0, 1 }, { 1, 3 }, { 1, 4 }, { 1, 5 }
+};
+
+static void __init mv88f6180_get_clk_ratio(
+	void __iomem *sar, int id, int *mult, int *div)
+{
+	switch (id) {
+	case KIRKWOOD_CPU_TO_L2:
+	{
+		/* mv88f6180 has a fixed 1:2 CPU-to-L2 ratio */
+		*mult = 1;
+		*div = 2;
+		break;
+	}
+	case KIRKWOOD_CPU_TO_DDR:
+	{
+		u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) &
+			SAR_MV88F6180_CLK_MASK;
+		*mult = mv88f6180_cpu_ddr_ratios[opt][0];
+		*div = mv88f6180_cpu_ddr_ratios[opt][1];
+		break;
+	}
+	}
+}
+
+static u32 __init mv98dx1135_get_tclk_freq(void __iomem *sar)
+{
+	return 166666667;
+}
+
+static const struct coreclk_soc_desc kirkwood_coreclks = {
+	.get_tclk_freq = kirkwood_get_tclk_freq,
+	.get_cpu_freq = kirkwood_get_cpu_freq,
+	.get_clk_ratio = kirkwood_get_clk_ratio,
+	.ratios = kirkwood_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(kirkwood_coreclk_ratios),
+};
+
+static const struct coreclk_soc_desc mv88f6180_coreclks = {
+	.get_tclk_freq = kirkwood_get_tclk_freq,
+	.get_cpu_freq = mv88f6180_get_cpu_freq,
+	.get_clk_ratio = mv88f6180_get_clk_ratio,
+	.ratios = kirkwood_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(kirkwood_coreclk_ratios),
+};
+
+static const struct coreclk_soc_desc mv98dx1135_coreclks = {
+	.get_tclk_freq = mv98dx1135_get_tclk_freq,
+	.get_cpu_freq = kirkwood_get_cpu_freq,
+	.get_clk_ratio = kirkwood_get_clk_ratio,
+	.ratios = kirkwood_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(kirkwood_coreclk_ratios),
+};
+
+/*
+ * Clock Gating Control
+ */
+
+static const struct clk_gating_soc_desc kirkwood_gating_desc[] __initconst = {
+	{ "ge0", NULL, 0, 0 },
+	{ "pex0", NULL, 2, 0 },
+	{ "usb0", NULL, 3, 0 },
+	{ "sdio", NULL, 4, 0 },
+	{ "tsu", NULL, 5, 0 },
+	{ "runit", NULL, 7, 0 },
+	{ "xor0", NULL, 8, 0 },
+	{ "audio", NULL, 9, 0 },
+	{ "sata0", NULL, 14, 0 },
+	{ "sata1", NULL, 15, 0 },
+	{ "xor1", NULL, 16, 0 },
+	{ "crypto", NULL, 17, 0 },
+	{ "pex1", NULL, 18, 0 },
+	{ "ge1", NULL, 19, 0 },
+	{ "tdm", NULL, 20, 0 },
+	{ }
+};
+
+
+/*
+ * Clock Muxing Control
+ */
+
+struct clk_muxing_soc_desc {
+	const char *name;
+	const char **parents;
+	int num_parents;
+	int shift;
+	int width;
+	unsigned long flags;
+};
+
+struct clk_muxing_ctrl {
+	spinlock_t *lock;
+	struct clk **muxes;
+	int num_muxes;
+};
+
+static const char *powersave_parents[] = {
+	"cpuclk",
+	"ddrclk",
+};
+
+static const struct clk_muxing_soc_desc kirkwood_mux_desc[] __initconst = {
+	{ "powersave", powersave_parents, ARRAY_SIZE(powersave_parents),
+		11, 1, 0 },
+	{ }
+};
+
+static struct clk *clk_muxing_get_src(
+	struct of_phandle_args *clkspec, void *data)
+{
+	struct clk_muxing_ctrl *ctrl = (struct clk_muxing_ctrl *)data;
+	int n;
+
+	if (clkspec->args_count < 1)
+		return ERR_PTR(-EINVAL);
+
+	for (n = 0; n < ctrl->num_muxes; n++) {
+		struct clk_mux *mux =
+			to_clk_mux(__clk_get_hw(ctrl->muxes[n]));
+		if (clkspec->args[0] == mux->shift)
+			return ctrl->muxes[n];
+	}
+	return ERR_PTR(-ENODEV);
+}
+
+static void __init kirkwood_clk_muxing_setup(struct device_node *np,
+				   const struct clk_muxing_soc_desc *desc)
+{
+	struct clk_muxing_ctrl *ctrl;
+	void __iomem *base;
+	int n;
+
+	base = of_iomap(np, 0);
+	if (WARN_ON(!base))
+		return;
+
+	ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
+	if (WARN_ON(!ctrl))
+		goto ctrl_out;
+
+	/* lock must already be initialized */
+	ctrl->lock = &ctrl_gating_lock;
+
+	/* Count, allocate, and register clock muxes */
+	for (n = 0; desc[n].name;)
+		n++;
+
+	ctrl->num_muxes = n;
+	ctrl->muxes = kcalloc(ctrl->num_muxes, sizeof(struct clk *),
+			GFP_KERNEL);
+	if (WARN_ON(!ctrl->muxes))
+		goto muxes_out;
+
+	for (n = 0; n < ctrl->num_muxes; n++) {
+		ctrl->muxes[n] = clk_register_mux(NULL, desc[n].name,
+				desc[n].parents, desc[n].num_parents,
+				desc[n].flags, base, desc[n].shift,
+				desc[n].width, desc[n].flags, ctrl->lock);
+		WARN_ON(IS_ERR(ctrl->muxes[n]));
+	}
+
+	of_clk_add_provider(np, clk_muxing_get_src, ctrl);
+
+	return;
+muxes_out:
+	kfree(ctrl);
+ctrl_out:
+	iounmap(base);
+}
+
+static void __init kirkwood_clk_init(struct device_node *np)
+{
+	struct device_node *cgnp =
+		of_find_compatible_node(NULL, NULL, "marvell,kirkwood-gating-clock");
+
+
+	if (of_device_is_compatible(np, "marvell,mv88f6180-core-clock"))
+		mvebu_coreclk_setup(np, &mv88f6180_coreclks);
+	else if (of_device_is_compatible(np, "marvell,mv98dx1135-core-clock"))
+		mvebu_coreclk_setup(np, &mv98dx1135_coreclks);
+	else
+		mvebu_coreclk_setup(np, &kirkwood_coreclks);
+
+	if (cgnp) {
+		mvebu_clk_gating_setup(cgnp, kirkwood_gating_desc);
+		kirkwood_clk_muxing_setup(cgnp, kirkwood_mux_desc);
+
+		of_node_put(cgnp);
+	}
+}
+CLK_OF_DECLARE(kirkwood_clk, "marvell,kirkwood-core-clock",
+	       kirkwood_clk_init);
+CLK_OF_DECLARE(mv88f6180_clk, "marvell,mv88f6180-core-clock",
+	       kirkwood_clk_init);
+CLK_OF_DECLARE(98dx1135_clk, "marvell,mv98dx1135-core-clock",
+	       kirkwood_clk_init);
diff --git a/drivers/clk/mvebu/mv98dx3236.c b/drivers/clk/mvebu/mv98dx3236.c
new file mode 100644
index 000000000..1c8ab4f83
--- /dev/null
+++ b/drivers/clk/mvebu/mv98dx3236.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell MV98DX3236 SoC clocks
+ *
+ * Copyright (C) 2012 Marvell
+ *
+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ * Andrew Lunn <andrew@lunn.ch>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include "common.h"
+
+
+/*
+ * For 98DX4251 Sample At Reset the CPU, DDR and Main PLL clocks are all
+ * defined at the same time
+ *
+ * SAR1[20:18]   : CPU frequency    DDR frequency   MPLL frequency
+ *		 0  =  400 MHz	    400 MHz	    800 MHz
+ *		 2  =  667 MHz	    667 MHz	    2000 MHz
+ *		 3  =  800 MHz	    800 MHz	    1600 MHz
+ *		 others reserved.
+ *
+ * For 98DX3236 Sample At Reset the CPU, DDR and Main PLL clocks are all
+ * defined at the same time
+ *
+ * SAR1[20:18]   : CPU frequency    DDR frequency   MPLL frequency
+ *		 1  =  667 MHz	    667 MHz	    2000 MHz
+ *		 2  =  400 MHz	    400 MHz	    400 MHz
+ *		 3  =  800 MHz	    800 MHz	    800 MHz
+ *		 5  =  800 MHz	    400 MHz	    800 MHz
+ *		 others reserved.
+ */
+
+#define SAR1_MV98DX3236_CPU_DDR_MPLL_FREQ_OPT		18
+#define SAR1_MV98DX3236_CPU_DDR_MPLL_FREQ_OPT_MASK	0x7
+
+static u32 __init mv98dx3236_get_tclk_freq(void __iomem *sar)
+{
+	/* Tclk = 200MHz, no SaR dependency */
+	return 200000000;
+}
+
+static const u32 mv98dx3236_cpu_frequencies[] __initconst = {
+	0,
+	667000000,
+	400000000,
+	800000000,
+	0,
+	800000000,
+	0, 0,
+};
+
+static const u32 mv98dx4251_cpu_frequencies[] __initconst = {
+	400000000,
+	0,
+	667000000,
+	800000000,
+	0, 0, 0, 0,
+};
+
+static u32 __init mv98dx3236_get_cpu_freq(void __iomem *sar)
+{
+	u32 cpu_freq = 0;
+	u8 cpu_freq_select = 0;
+
+	cpu_freq_select = ((readl(sar) >> SAR1_MV98DX3236_CPU_DDR_MPLL_FREQ_OPT) &
+			   SAR1_MV98DX3236_CPU_DDR_MPLL_FREQ_OPT_MASK);
+
+	if (of_machine_is_compatible("marvell,armadaxp-98dx4251"))
+		cpu_freq = mv98dx4251_cpu_frequencies[cpu_freq_select];
+	else if (of_machine_is_compatible("marvell,armadaxp-98dx3236"))
+		cpu_freq = mv98dx3236_cpu_frequencies[cpu_freq_select];
+
+	if (!cpu_freq)
+		pr_err("CPU freq select unsupported %d\n", cpu_freq_select);
+
+	return cpu_freq;
+}
+
+enum {
+	MV98DX3236_CPU_TO_DDR,
+	MV98DX3236_CPU_TO_MPLL
+};
+
+static const struct coreclk_ratio mv98dx3236_core_ratios[] __initconst = {
+	{ .id = MV98DX3236_CPU_TO_DDR, .name = "ddrclk" },
+	{ .id = MV98DX3236_CPU_TO_MPLL, .name = "mpll" },
+};
+
+static const int __initconst mv98dx3236_cpu_mpll_ratios[8][2] = {
+	{0, 1}, {3, 1}, {1, 1}, {1, 1},
+	{0, 1}, {1, 1}, {0, 1}, {0, 1},
+};
+
+static const int __initconst mv98dx3236_cpu_ddr_ratios[8][2] = {
+	{0, 1}, {1, 1}, {1, 1}, {1, 1},
+	{0, 1}, {1, 2}, {0, 1}, {0, 1},
+};
+
+static const int __initconst mv98dx4251_cpu_mpll_ratios[8][2] = {
+	{2, 1}, {0, 1}, {3, 1}, {2, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static const int __initconst mv98dx4251_cpu_ddr_ratios[8][2] = {
+	{1, 1}, {0, 1}, {1, 1}, {1, 1},
+	{0, 1}, {0, 1}, {0, 1}, {0, 1},
+};
+
+static void __init mv98dx3236_get_clk_ratio(
+	void __iomem *sar, int id, int *mult, int *div)
+{
+	u32 opt = ((readl(sar) >> SAR1_MV98DX3236_CPU_DDR_MPLL_FREQ_OPT) &
+		SAR1_MV98DX3236_CPU_DDR_MPLL_FREQ_OPT_MASK);
+
+	switch (id) {
+	case MV98DX3236_CPU_TO_DDR:
+		if (of_machine_is_compatible("marvell,armadaxp-98dx4251")) {
+			*mult = mv98dx4251_cpu_ddr_ratios[opt][0];
+			*div = mv98dx4251_cpu_ddr_ratios[opt][1];
+		} else if (of_machine_is_compatible("marvell,armadaxp-98dx3236")) {
+			*mult = mv98dx3236_cpu_ddr_ratios[opt][0];
+			*div = mv98dx3236_cpu_ddr_ratios[opt][1];
+		}
+		break;
+	case MV98DX3236_CPU_TO_MPLL:
+		if (of_machine_is_compatible("marvell,armadaxp-98dx4251")) {
+			*mult = mv98dx4251_cpu_mpll_ratios[opt][0];
+			*div = mv98dx4251_cpu_mpll_ratios[opt][1];
+		} else if (of_machine_is_compatible("marvell,armadaxp-98dx3236")) {
+			*mult = mv98dx3236_cpu_mpll_ratios[opt][0];
+			*div = mv98dx3236_cpu_mpll_ratios[opt][1];
+		}
+		break;
+	}
+}
+
+static const struct coreclk_soc_desc mv98dx3236_core_clocks = {
+	.get_tclk_freq = mv98dx3236_get_tclk_freq,
+	.get_cpu_freq = mv98dx3236_get_cpu_freq,
+	.get_clk_ratio = mv98dx3236_get_clk_ratio,
+	.ratios = mv98dx3236_core_ratios,
+	.num_ratios = ARRAY_SIZE(mv98dx3236_core_ratios),
+};
+
+
+/*
+ * Clock Gating Control
+ */
+
+static const struct clk_gating_soc_desc mv98dx3236_gating_desc[] __initconst = {
+	{ "ge1", NULL, 3, 0 },
+	{ "ge0", NULL, 4, 0 },
+	{ "pex00", NULL, 5, 0 },
+	{ "sdio", NULL, 17, 0 },
+	{ "usb0", NULL, 18, 0 },
+	{ "xor0", NULL, 22, 0 },
+	{ }
+};
+
+static void __init mv98dx3236_clk_init(struct device_node *np)
+{
+	struct device_node *cgnp =
+		of_find_compatible_node(NULL, NULL, "marvell,mv98dx3236-gating-clock");
+
+	mvebu_coreclk_setup(np, &mv98dx3236_core_clocks);
+
+	if (cgnp) {
+		mvebu_clk_gating_setup(cgnp, mv98dx3236_gating_desc);
+		of_node_put(cgnp);
+	}
+}
+CLK_OF_DECLARE(mv98dx3236_clk, "marvell,mv98dx3236-core-clock", mv98dx3236_clk_init);
diff --git a/drivers/clk/mvebu/orion.c b/drivers/clk/mvebu/orion.c
new file mode 100644
index 000000000..f681a65be
--- /dev/null
+++ b/drivers/clk/mvebu/orion.c
@@ -0,0 +1,278 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Marvell Orion SoC clocks
+ *
+ * Copyright (C) 2014 Thomas Petazzoni
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include "common.h"
+
+static const struct coreclk_ratio orion_coreclk_ratios[] __initconst = {
+	{ .id = 0, .name = "ddrclk", }
+};
+
+/*
+ * Orion 5181
+ */
+
+#define SAR_MV88F5181_TCLK_FREQ      8
+#define SAR_MV88F5181_TCLK_FREQ_MASK 0x3
+
+static u32 __init mv88f5181_get_tclk_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5181_TCLK_FREQ) &
+		SAR_MV88F5181_TCLK_FREQ_MASK;
+	if (opt == 0)
+		return 133333333;
+	else if (opt == 1)
+		return 150000000;
+	else if (opt == 2)
+		return 166666667;
+	else
+		return 0;
+}
+
+#define SAR_MV88F5181_CPU_FREQ       4
+#define SAR_MV88F5181_CPU_FREQ_MASK  0xf
+
+static u32 __init mv88f5181_get_cpu_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5181_CPU_FREQ) &
+		SAR_MV88F5181_CPU_FREQ_MASK;
+	if (opt == 0)
+		return 333333333;
+	else if (opt == 1 || opt == 2)
+		return 400000000;
+	else if (opt == 3)
+		return 500000000;
+	else
+		return 0;
+}
+
+static void __init mv88f5181_get_clk_ratio(void __iomem *sar, int id,
+					   int *mult, int *div)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5181_CPU_FREQ) &
+		SAR_MV88F5181_CPU_FREQ_MASK;
+	if (opt == 0 || opt == 1) {
+		*mult = 1;
+		*div  = 2;
+	} else if (opt == 2 || opt == 3) {
+		*mult = 1;
+		*div  = 3;
+	} else {
+		*mult = 0;
+		*div  = 1;
+	}
+}
+
+static const struct coreclk_soc_desc mv88f5181_coreclks = {
+	.get_tclk_freq = mv88f5181_get_tclk_freq,
+	.get_cpu_freq = mv88f5181_get_cpu_freq,
+	.get_clk_ratio = mv88f5181_get_clk_ratio,
+	.ratios = orion_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(orion_coreclk_ratios),
+};
+
+static void __init mv88f5181_clk_init(struct device_node *np)
+{
+	return mvebu_coreclk_setup(np, &mv88f5181_coreclks);
+}
+
+CLK_OF_DECLARE(mv88f5181_clk, "marvell,mv88f5181-core-clock", mv88f5181_clk_init);
+
+/*
+ * Orion 5182
+ */
+
+#define SAR_MV88F5182_TCLK_FREQ      8
+#define SAR_MV88F5182_TCLK_FREQ_MASK 0x3
+
+static u32 __init mv88f5182_get_tclk_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5182_TCLK_FREQ) &
+		SAR_MV88F5182_TCLK_FREQ_MASK;
+	if (opt == 1)
+		return 150000000;
+	else if (opt == 2)
+		return 166666667;
+	else
+		return 0;
+}
+
+#define SAR_MV88F5182_CPU_FREQ       4
+#define SAR_MV88F5182_CPU_FREQ_MASK  0xf
+
+static u32 __init mv88f5182_get_cpu_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5182_CPU_FREQ) &
+		SAR_MV88F5182_CPU_FREQ_MASK;
+	if (opt == 0)
+		return 333333333;
+	else if (opt == 1 || opt == 2)
+		return 400000000;
+	else if (opt == 3)
+		return 500000000;
+	else
+		return 0;
+}
+
+static void __init mv88f5182_get_clk_ratio(void __iomem *sar, int id,
+					   int *mult, int *div)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5182_CPU_FREQ) &
+		SAR_MV88F5182_CPU_FREQ_MASK;
+	if (opt == 0 || opt == 1) {
+		*mult = 1;
+		*div  = 2;
+	} else if (opt == 2 || opt == 3) {
+		*mult = 1;
+		*div  = 3;
+	} else {
+		*mult = 0;
+		*div  = 1;
+	}
+}
+
+static const struct coreclk_soc_desc mv88f5182_coreclks = {
+	.get_tclk_freq = mv88f5182_get_tclk_freq,
+	.get_cpu_freq = mv88f5182_get_cpu_freq,
+	.get_clk_ratio = mv88f5182_get_clk_ratio,
+	.ratios = orion_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(orion_coreclk_ratios),
+};
+
+static void __init mv88f5182_clk_init(struct device_node *np)
+{
+	return mvebu_coreclk_setup(np, &mv88f5182_coreclks);
+}
+
+CLK_OF_DECLARE(mv88f5182_clk, "marvell,mv88f5182-core-clock", mv88f5182_clk_init);
+
+/*
+ * Orion 5281
+ */
+
+static u32 __init mv88f5281_get_tclk_freq(void __iomem *sar)
+{
+	/* On 5281, tclk is always 166 Mhz */
+	return 166666667;
+}
+
+#define SAR_MV88F5281_CPU_FREQ       4
+#define SAR_MV88F5281_CPU_FREQ_MASK  0xf
+
+static u32 __init mv88f5281_get_cpu_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5281_CPU_FREQ) &
+		SAR_MV88F5281_CPU_FREQ_MASK;
+	if (opt == 1 || opt == 2)
+		return 400000000;
+	else if (opt == 3)
+		return 500000000;
+	else
+		return 0;
+}
+
+static void __init mv88f5281_get_clk_ratio(void __iomem *sar, int id,
+					   int *mult, int *div)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F5281_CPU_FREQ) &
+		SAR_MV88F5281_CPU_FREQ_MASK;
+	if (opt == 1) {
+		*mult = 1;
+		*div = 2;
+	} else if (opt == 2 || opt == 3) {
+		*mult = 1;
+		*div = 3;
+	} else {
+		*mult = 0;
+		*div = 1;
+	}
+}
+
+static const struct coreclk_soc_desc mv88f5281_coreclks = {
+	.get_tclk_freq = mv88f5281_get_tclk_freq,
+	.get_cpu_freq = mv88f5281_get_cpu_freq,
+	.get_clk_ratio = mv88f5281_get_clk_ratio,
+	.ratios = orion_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(orion_coreclk_ratios),
+};
+
+static void __init mv88f5281_clk_init(struct device_node *np)
+{
+	return mvebu_coreclk_setup(np, &mv88f5281_coreclks);
+}
+
+CLK_OF_DECLARE(mv88f5281_clk, "marvell,mv88f5281-core-clock", mv88f5281_clk_init);
+
+/*
+ * Orion 6183
+ */
+
+#define SAR_MV88F6183_TCLK_FREQ      9
+#define SAR_MV88F6183_TCLK_FREQ_MASK 0x1
+
+static u32 __init mv88f6183_get_tclk_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F6183_TCLK_FREQ) &
+		SAR_MV88F6183_TCLK_FREQ_MASK;
+	if (opt == 0)
+		return 133333333;
+	else if (opt == 1)
+		return 166666667;
+	else
+		return 0;
+}
+
+#define SAR_MV88F6183_CPU_FREQ       1
+#define SAR_MV88F6183_CPU_FREQ_MASK  0x3f
+
+static u32 __init mv88f6183_get_cpu_freq(void __iomem *sar)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F6183_CPU_FREQ) &
+		SAR_MV88F6183_CPU_FREQ_MASK;
+	if (opt == 9)
+		return 333333333;
+	else if (opt == 17)
+		return 400000000;
+	else
+		return 0;
+}
+
+static void __init mv88f6183_get_clk_ratio(void __iomem *sar, int id,
+					   int *mult, int *div)
+{
+	u32 opt = (readl(sar) >> SAR_MV88F6183_CPU_FREQ) &
+		SAR_MV88F6183_CPU_FREQ_MASK;
+	if (opt == 9 || opt == 17) {
+		*mult = 1;
+		*div  = 2;
+	} else {
+		*mult = 0;
+		*div  = 1;
+	}
+}
+
+static const struct coreclk_soc_desc mv88f6183_coreclks = {
+	.get_tclk_freq = mv88f6183_get_tclk_freq,
+	.get_cpu_freq = mv88f6183_get_cpu_freq,
+	.get_clk_ratio = mv88f6183_get_clk_ratio,
+	.ratios = orion_coreclk_ratios,
+	.num_ratios = ARRAY_SIZE(orion_coreclk_ratios),
+};
+
+
+static void __init mv88f6183_clk_init(struct device_node *np)
+{
+	return mvebu_coreclk_setup(np, &mv88f6183_coreclks);
+}
+
+CLK_OF_DECLARE(mv88f6183_clk, "marvell,mv88f6183-core-clock", mv88f6183_clk_init);