Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

4 files changed, 1416 insertions, 0 deletions

diff --git a/drivers/clk/xilinx/Kconfig b/drivers/clk/xilinx/Kconfig
new file mode 100644
index 000000000..f205522c4
--- /dev/null
+++ b/drivers/clk/xilinx/Kconfig
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+
+config XILINX_VCU
+	tristate "Xilinx VCU logicoreIP Init"
+	depends on HAS_IOMEM && COMMON_CLK
+	select REGMAP_MMIO
+	help
+	  Provides the driver to enable and disable the isolation between the
+	  processing system and programmable logic part by using the logicoreIP
+	  register set. This driver also configures the frequency based on the
+	  clock information from the logicoreIP register set.
+
+	  If you say yes here you get support for the logicoreIP.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xlnx_vcu.
+
+config COMMON_CLK_XLNX_CLKWZRD
+	tristate "Xilinx Clocking Wizard"
+	depends on COMMON_CLK && OF
+	depends on HAS_IOMEM
+	help
+	  Support for the Xilinx Clocking Wizard IP core clock generator.
+	  Adds support for clocking wizard and compatible.
+	  This driver supports the Xilinx clocking wizard programmable clock
+	  synthesizer. The number of output is configurable in the design.
+
+	  If unsure, say N.
+
diff --git a/drivers/clk/xilinx/Makefile b/drivers/clk/xilinx/Makefile
new file mode 100644
index 000000000..7ac1789c6
--- /dev/null
+++ b/drivers/clk/xilinx/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_XILINX_VCU)	+= xlnx_vcu.o
+obj-$(CONFIG_COMMON_CLK_XLNX_CLKWZRD)	+= clk-xlnx-clock-wizard.o
diff --git a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
new file mode 100644
index 000000000..4a2358393
--- /dev/null
+++ b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c
@@ -0,0 +1,639 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx 'Clocking Wizard' driver
+ *
+ *  Copyright (C) 2013 - 2021 Xilinx
+ *
+ *  Sören Brinkmann <soren.brinkmann@xilinx.com>
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/iopoll.h>
+
+#define WZRD_NUM_OUTPUTS	7
+#define WZRD_ACLK_MAX_FREQ	250000000UL
+
+#define WZRD_CLK_CFG_REG(n)	(0x200 + 4 * (n))
+
+#define WZRD_CLKOUT0_FRAC_EN	BIT(18)
+#define WZRD_CLKFBOUT_FRAC_EN	BIT(26)
+
+#define WZRD_CLKFBOUT_MULT_SHIFT	8
+#define WZRD_CLKFBOUT_MULT_MASK		(0xff << WZRD_CLKFBOUT_MULT_SHIFT)
+#define WZRD_CLKFBOUT_FRAC_SHIFT	16
+#define WZRD_CLKFBOUT_FRAC_MASK		(0x3ff << WZRD_CLKFBOUT_FRAC_SHIFT)
+#define WZRD_DIVCLK_DIVIDE_SHIFT	0
+#define WZRD_DIVCLK_DIVIDE_MASK		(0xff << WZRD_DIVCLK_DIVIDE_SHIFT)
+#define WZRD_CLKOUT_DIVIDE_SHIFT	0
+#define WZRD_CLKOUT_DIVIDE_WIDTH	8
+#define WZRD_CLKOUT_DIVIDE_MASK		(0xff << WZRD_DIVCLK_DIVIDE_SHIFT)
+#define WZRD_CLKOUT_FRAC_SHIFT		8
+#define WZRD_CLKOUT_FRAC_MASK		0x3ff
+
+#define WZRD_DR_MAX_INT_DIV_VALUE	255
+#define WZRD_DR_STATUS_REG_OFFSET	0x04
+#define WZRD_DR_LOCK_BIT_MASK		0x00000001
+#define WZRD_DR_INIT_REG_OFFSET		0x25C
+#define WZRD_DR_DIV_TO_PHASE_OFFSET	4
+#define WZRD_DR_BEGIN_DYNA_RECONF	0x03
+#define WZRD_DR_BEGIN_DYNA_RECONF_5_2	0x07
+#define WZRD_DR_BEGIN_DYNA_RECONF1_5_2	0x02
+
+#define WZRD_USEC_POLL		10
+#define WZRD_TIMEOUT_POLL		1000
+/* Get the mask from width */
+#define div_mask(width)			((1 << (width)) - 1)
+
+/* Extract divider instance from clock hardware instance */
+#define to_clk_wzrd_divider(_hw) container_of(_hw, struct clk_wzrd_divider, hw)
+
+enum clk_wzrd_int_clks {
+	wzrd_clk_mul,
+	wzrd_clk_mul_div,
+	wzrd_clk_mul_frac,
+	wzrd_clk_int_max
+};
+
+/**
+ * struct clk_wzrd - Clock wizard private data structure
+ *
+ * @clk_data:		Clock data
+ * @nb:			Notifier block
+ * @base:		Memory base
+ * @clk_in1:		Handle to input clock 'clk_in1'
+ * @axi_clk:		Handle to input clock 's_axi_aclk'
+ * @clks_internal:	Internal clocks
+ * @clkout:		Output clocks
+ * @speed_grade:	Speed grade of the device
+ * @suspended:		Flag indicating power state of the device
+ */
+struct clk_wzrd {
+	struct clk_onecell_data clk_data;
+	struct notifier_block nb;
+	void __iomem *base;
+	struct clk *clk_in1;
+	struct clk *axi_clk;
+	struct clk *clks_internal[wzrd_clk_int_max];
+	struct clk *clkout[WZRD_NUM_OUTPUTS];
+	unsigned int speed_grade;
+	bool suspended;
+};
+
+/**
+ * struct clk_wzrd_divider - clock divider specific to clk_wzrd
+ *
+ * @hw:		handle between common and hardware-specific interfaces
+ * @base:	base address of register containing the divider
+ * @offset:	offset address of register containing the divider
+ * @shift:	shift to the divider bit field
+ * @width:	width of the divider bit field
+ * @flags:	clk_wzrd divider flags
+ * @table:	array of value/divider pairs, last entry should have div = 0
+ * @lock:	register lock
+ */
+struct clk_wzrd_divider {
+	struct clk_hw hw;
+	void __iomem *base;
+	u16 offset;
+	u8 shift;
+	u8 width;
+	u8 flags;
+	const struct clk_div_table *table;
+	spinlock_t *lock;  /* divider lock */
+};
+
+#define to_clk_wzrd(_nb) container_of(_nb, struct clk_wzrd, nb)
+
+/* maximum frequencies for input/output clocks per speed grade */
+static const unsigned long clk_wzrd_max_freq[] = {
+	800000000UL,
+	933000000UL,
+	1066000000UL
+};
+
+/* spin lock variable for clk_wzrd */
+static DEFINE_SPINLOCK(clkwzrd_lock);
+
+static unsigned long clk_wzrd_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
+	void __iomem *div_addr = divider->base + divider->offset;
+	unsigned int val;
+
+	val = readl(div_addr) >> divider->shift;
+	val &= div_mask(divider->width);
+
+	return divider_recalc_rate(hw, parent_rate, val, divider->table,
+			divider->flags, divider->width);
+}
+
+static int clk_wzrd_dynamic_reconfig(struct clk_hw *hw, unsigned long rate,
+				     unsigned long parent_rate)
+{
+	int err;
+	u32 value;
+	unsigned long flags = 0;
+	struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
+	void __iomem *div_addr = divider->base + divider->offset;
+
+	if (divider->lock)
+		spin_lock_irqsave(divider->lock, flags);
+	else
+		__acquire(divider->lock);
+
+	value = DIV_ROUND_CLOSEST(parent_rate, rate);
+
+	/* Cap the value to max */
+	min_t(u32, value, WZRD_DR_MAX_INT_DIV_VALUE);
+
+	/* Set divisor and clear phase offset */
+	writel(value, div_addr);
+	writel(0x00, div_addr + WZRD_DR_DIV_TO_PHASE_OFFSET);
+
+	/* Check status register */
+	err = readl_poll_timeout(divider->base + WZRD_DR_STATUS_REG_OFFSET,
+				 value, value & WZRD_DR_LOCK_BIT_MASK,
+				 WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
+	if (err)
+		goto err_reconfig;
+
+	/* Initiate reconfiguration */
+	writel(WZRD_DR_BEGIN_DYNA_RECONF_5_2,
+	       divider->base + WZRD_DR_INIT_REG_OFFSET);
+	writel(WZRD_DR_BEGIN_DYNA_RECONF1_5_2,
+	       divider->base + WZRD_DR_INIT_REG_OFFSET);
+
+	/* Check status register */
+	err = readl_poll_timeout(divider->base + WZRD_DR_STATUS_REG_OFFSET,
+				 value, value & WZRD_DR_LOCK_BIT_MASK,
+				 WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
+err_reconfig:
+	if (divider->lock)
+		spin_unlock_irqrestore(divider->lock, flags);
+	else
+		__release(divider->lock);
+	return err;
+}
+
+static long clk_wzrd_round_rate(struct clk_hw *hw, unsigned long rate,
+				unsigned long *prate)
+{
+	u8 div;
+
+	/*
+	 * since we don't change parent rate we just round rate to closest
+	 * achievable
+	 */
+	div = DIV_ROUND_CLOSEST(*prate, rate);
+
+	return *prate / div;
+}
+
+static const struct clk_ops clk_wzrd_clk_divider_ops = {
+	.round_rate = clk_wzrd_round_rate,
+	.set_rate = clk_wzrd_dynamic_reconfig,
+	.recalc_rate = clk_wzrd_recalc_rate,
+};
+
+static unsigned long clk_wzrd_recalc_ratef(struct clk_hw *hw,
+					   unsigned long parent_rate)
+{
+	unsigned int val;
+	u32 div, frac;
+	struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
+	void __iomem *div_addr = divider->base + divider->offset;
+
+	val = readl(div_addr);
+	div = val & div_mask(divider->width);
+	frac = (val >> WZRD_CLKOUT_FRAC_SHIFT) & WZRD_CLKOUT_FRAC_MASK;
+
+	return mult_frac(parent_rate, 1000, (div * 1000) + frac);
+}
+
+static int clk_wzrd_dynamic_reconfig_f(struct clk_hw *hw, unsigned long rate,
+				       unsigned long parent_rate)
+{
+	int err;
+	u32 value, pre;
+	unsigned long rate_div, f, clockout0_div;
+	struct clk_wzrd_divider *divider = to_clk_wzrd_divider(hw);
+	void __iomem *div_addr = divider->base + divider->offset;
+
+	rate_div = DIV_ROUND_DOWN_ULL(parent_rate * 1000, rate);
+	clockout0_div = rate_div / 1000;
+
+	pre = DIV_ROUND_CLOSEST((parent_rate * 1000), rate);
+	f = (u32)(pre - (clockout0_div * 1000));
+	f = f & WZRD_CLKOUT_FRAC_MASK;
+	f = f << WZRD_CLKOUT_DIVIDE_WIDTH;
+
+	value = (f  | (clockout0_div & WZRD_CLKOUT_DIVIDE_MASK));
+
+	/* Set divisor and clear phase offset */
+	writel(value, div_addr);
+	writel(0x0, div_addr + WZRD_DR_DIV_TO_PHASE_OFFSET);
+
+	/* Check status register */
+	err = readl_poll_timeout(divider->base + WZRD_DR_STATUS_REG_OFFSET, value,
+				 value & WZRD_DR_LOCK_BIT_MASK,
+				 WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
+	if (err)
+		return err;
+
+	/* Initiate reconfiguration */
+	writel(WZRD_DR_BEGIN_DYNA_RECONF_5_2,
+	       divider->base + WZRD_DR_INIT_REG_OFFSET);
+	writel(WZRD_DR_BEGIN_DYNA_RECONF1_5_2,
+	       divider->base + WZRD_DR_INIT_REG_OFFSET);
+
+	/* Check status register */
+	return readl_poll_timeout(divider->base + WZRD_DR_STATUS_REG_OFFSET, value,
+				value & WZRD_DR_LOCK_BIT_MASK,
+				WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
+}
+
+static long clk_wzrd_round_rate_f(struct clk_hw *hw, unsigned long rate,
+				  unsigned long *prate)
+{
+	return rate;
+}
+
+static const struct clk_ops clk_wzrd_clk_divider_ops_f = {
+	.round_rate = clk_wzrd_round_rate_f,
+	.set_rate = clk_wzrd_dynamic_reconfig_f,
+	.recalc_rate = clk_wzrd_recalc_ratef,
+};
+
+static struct clk *clk_wzrd_register_divf(struct device *dev,
+					  const char *name,
+					  const char *parent_name,
+					  unsigned long flags,
+					  void __iomem *base, u16 offset,
+					  u8 shift, u8 width,
+					  u8 clk_divider_flags,
+					  const struct clk_div_table *table,
+					  spinlock_t *lock)
+{
+	struct clk_wzrd_divider *div;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret;
+
+	div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
+	if (!div)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+
+	init.ops = &clk_wzrd_clk_divider_ops_f;
+
+	init.flags = flags;
+	init.parent_names = &parent_name;
+	init.num_parents = 1;
+
+	div->base = base;
+	div->offset = offset;
+	div->shift = shift;
+	div->width = width;
+	div->flags = clk_divider_flags;
+	div->lock = lock;
+	div->hw.init = &init;
+	div->table = table;
+
+	hw = &div->hw;
+	ret =  devm_clk_hw_register(dev, hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return hw->clk;
+}
+
+static struct clk *clk_wzrd_register_divider(struct device *dev,
+					     const char *name,
+					     const char *parent_name,
+					     unsigned long flags,
+					     void __iomem *base, u16 offset,
+					     u8 shift, u8 width,
+					     u8 clk_divider_flags,
+					     const struct clk_div_table *table,
+					     spinlock_t *lock)
+{
+	struct clk_wzrd_divider *div;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret;
+
+	div = devm_kzalloc(dev, sizeof(*div), GFP_KERNEL);
+	if (!div)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &clk_wzrd_clk_divider_ops;
+	init.flags = flags;
+	init.parent_names =  &parent_name;
+	init.num_parents =  1;
+
+	div->base = base;
+	div->offset = offset;
+	div->shift = shift;
+	div->width = width;
+	div->flags = clk_divider_flags;
+	div->lock = lock;
+	div->hw.init = &init;
+	div->table = table;
+
+	hw = &div->hw;
+	ret = devm_clk_hw_register(dev, hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return hw->clk;
+}
+
+static int clk_wzrd_clk_notifier(struct notifier_block *nb, unsigned long event,
+				 void *data)
+{
+	unsigned long max;
+	struct clk_notifier_data *ndata = data;
+	struct clk_wzrd *clk_wzrd = to_clk_wzrd(nb);
+
+	if (clk_wzrd->suspended)
+		return NOTIFY_OK;
+
+	if (ndata->clk == clk_wzrd->clk_in1)
+		max = clk_wzrd_max_freq[clk_wzrd->speed_grade - 1];
+	else if (ndata->clk == clk_wzrd->axi_clk)
+		max = WZRD_ACLK_MAX_FREQ;
+	else
+		return NOTIFY_DONE;	/* should never happen */
+
+	switch (event) {
+	case PRE_RATE_CHANGE:
+		if (ndata->new_rate > max)
+			return NOTIFY_BAD;
+		return NOTIFY_OK;
+	case POST_RATE_CHANGE:
+	case ABORT_RATE_CHANGE:
+	default:
+		return NOTIFY_DONE;
+	}
+}
+
+static int __maybe_unused clk_wzrd_suspend(struct device *dev)
+{
+	struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(clk_wzrd->axi_clk);
+	clk_wzrd->suspended = true;
+
+	return 0;
+}
+
+static int __maybe_unused clk_wzrd_resume(struct device *dev)
+{
+	int ret;
+	struct clk_wzrd *clk_wzrd = dev_get_drvdata(dev);
+
+	ret = clk_prepare_enable(clk_wzrd->axi_clk);
+	if (ret) {
+		dev_err(dev, "unable to enable s_axi_aclk\n");
+		return ret;
+	}
+
+	clk_wzrd->suspended = false;
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(clk_wzrd_dev_pm_ops, clk_wzrd_suspend,
+			 clk_wzrd_resume);
+
+static int clk_wzrd_probe(struct platform_device *pdev)
+{
+	int i, ret;
+	u32 reg, reg_f, mult;
+	unsigned long rate;
+	const char *clk_name;
+	void __iomem *ctrl_reg;
+	struct clk_wzrd *clk_wzrd;
+	struct device_node *np = pdev->dev.of_node;
+	int nr_outputs;
+	unsigned long flags = 0;
+
+	clk_wzrd = devm_kzalloc(&pdev->dev, sizeof(*clk_wzrd), GFP_KERNEL);
+	if (!clk_wzrd)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, clk_wzrd);
+
+	clk_wzrd->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(clk_wzrd->base))
+		return PTR_ERR(clk_wzrd->base);
+
+	ret = of_property_read_u32(np, "xlnx,speed-grade", &clk_wzrd->speed_grade);
+	if (!ret) {
+		if (clk_wzrd->speed_grade < 1 || clk_wzrd->speed_grade > 3) {
+			dev_warn(&pdev->dev, "invalid speed grade '%d'\n",
+				 clk_wzrd->speed_grade);
+			clk_wzrd->speed_grade = 0;
+		}
+	}
+
+	clk_wzrd->clk_in1 = devm_clk_get(&pdev->dev, "clk_in1");
+	if (IS_ERR(clk_wzrd->clk_in1))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->clk_in1),
+				     "clk_in1 not found\n");
+
+	clk_wzrd->axi_clk = devm_clk_get(&pdev->dev, "s_axi_aclk");
+	if (IS_ERR(clk_wzrd->axi_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(clk_wzrd->axi_clk),
+				     "s_axi_aclk not found\n");
+	ret = clk_prepare_enable(clk_wzrd->axi_clk);
+	if (ret) {
+		dev_err(&pdev->dev, "enabling s_axi_aclk failed\n");
+		return ret;
+	}
+	rate = clk_get_rate(clk_wzrd->axi_clk);
+	if (rate > WZRD_ACLK_MAX_FREQ) {
+		dev_err(&pdev->dev, "s_axi_aclk frequency (%lu) too high\n",
+			rate);
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
+
+	reg = readl(clk_wzrd->base + WZRD_CLK_CFG_REG(0));
+	reg_f = reg & WZRD_CLKFBOUT_FRAC_MASK;
+	reg_f =  reg_f >> WZRD_CLKFBOUT_FRAC_SHIFT;
+
+	reg = reg & WZRD_CLKFBOUT_MULT_MASK;
+	reg =  reg >> WZRD_CLKFBOUT_MULT_SHIFT;
+	mult = (reg * 1000) + reg_f;
+	clk_name = kasprintf(GFP_KERNEL, "%s_mul", dev_name(&pdev->dev));
+	if (!clk_name) {
+		ret = -ENOMEM;
+		goto err_disable_clk;
+	}
+
+	ret = of_property_read_u32(np, "xlnx,nr-outputs", &nr_outputs);
+	if (ret || nr_outputs > WZRD_NUM_OUTPUTS) {
+		ret = -EINVAL;
+		goto err_disable_clk;
+	}
+	if (nr_outputs == 1)
+		flags = CLK_SET_RATE_PARENT;
+
+	clk_wzrd->clks_internal[wzrd_clk_mul] = clk_register_fixed_factor
+			(&pdev->dev, clk_name,
+			 __clk_get_name(clk_wzrd->clk_in1),
+			0, mult, 1000);
+	if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul])) {
+		dev_err(&pdev->dev, "unable to register fixed-factor clock\n");
+		ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul]);
+		goto err_disable_clk;
+	}
+
+	clk_name = kasprintf(GFP_KERNEL, "%s_mul_div", dev_name(&pdev->dev));
+	if (!clk_name) {
+		ret = -ENOMEM;
+		goto err_rm_int_clk;
+	}
+
+	ctrl_reg = clk_wzrd->base + WZRD_CLK_CFG_REG(0);
+	/* register div */
+	clk_wzrd->clks_internal[wzrd_clk_mul_div] = clk_register_divider
+			(&pdev->dev, clk_name,
+			 __clk_get_name(clk_wzrd->clks_internal[wzrd_clk_mul]),
+			flags, ctrl_reg, 0, 8, CLK_DIVIDER_ONE_BASED |
+			CLK_DIVIDER_ALLOW_ZERO, &clkwzrd_lock);
+	if (IS_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div])) {
+		dev_err(&pdev->dev, "unable to register divider clock\n");
+		ret = PTR_ERR(clk_wzrd->clks_internal[wzrd_clk_mul_div]);
+		goto err_rm_int_clk;
+	}
+
+	/* register div per output */
+	for (i = nr_outputs - 1; i >= 0 ; i--) {
+		const char *clkout_name;
+
+		clkout_name = kasprintf(GFP_KERNEL, "%s_out%d", dev_name(&pdev->dev), i);
+		if (!clkout_name) {
+			ret = -ENOMEM;
+			goto err_rm_int_clk;
+		}
+
+		if (!i)
+			clk_wzrd->clkout[i] = clk_wzrd_register_divf
+				(&pdev->dev, clkout_name,
+				clk_name, flags,
+				clk_wzrd->base, (WZRD_CLK_CFG_REG(2) + i * 12),
+				WZRD_CLKOUT_DIVIDE_SHIFT,
+				WZRD_CLKOUT_DIVIDE_WIDTH,
+				CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+				NULL, &clkwzrd_lock);
+		else
+			clk_wzrd->clkout[i] = clk_wzrd_register_divider
+				(&pdev->dev, clkout_name,
+				clk_name, 0,
+				clk_wzrd->base, (WZRD_CLK_CFG_REG(2) + i * 12),
+				WZRD_CLKOUT_DIVIDE_SHIFT,
+				WZRD_CLKOUT_DIVIDE_WIDTH,
+				CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO,
+				NULL, &clkwzrd_lock);
+		if (IS_ERR(clk_wzrd->clkout[i])) {
+			int j;
+
+			for (j = i + 1; j < nr_outputs; j++)
+				clk_unregister(clk_wzrd->clkout[j]);
+			dev_err(&pdev->dev,
+				"unable to register divider clock\n");
+			ret = PTR_ERR(clk_wzrd->clkout[i]);
+			goto err_rm_int_clks;
+		}
+	}
+
+	kfree(clk_name);
+
+	clk_wzrd->clk_data.clks = clk_wzrd->clkout;
+	clk_wzrd->clk_data.clk_num = ARRAY_SIZE(clk_wzrd->clkout);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &clk_wzrd->clk_data);
+
+	if (clk_wzrd->speed_grade) {
+		clk_wzrd->nb.notifier_call = clk_wzrd_clk_notifier;
+
+		ret = clk_notifier_register(clk_wzrd->clk_in1,
+					    &clk_wzrd->nb);
+		if (ret)
+			dev_warn(&pdev->dev,
+				 "unable to register clock notifier\n");
+
+		ret = clk_notifier_register(clk_wzrd->axi_clk, &clk_wzrd->nb);
+		if (ret)
+			dev_warn(&pdev->dev,
+				 "unable to register clock notifier\n");
+	}
+
+	return 0;
+
+err_rm_int_clks:
+	clk_unregister(clk_wzrd->clks_internal[1]);
+err_rm_int_clk:
+	kfree(clk_name);
+	clk_unregister(clk_wzrd->clks_internal[0]);
+err_disable_clk:
+	clk_disable_unprepare(clk_wzrd->axi_clk);
+
+	return ret;
+}
+
+static int clk_wzrd_remove(struct platform_device *pdev)
+{
+	int i;
+	struct clk_wzrd *clk_wzrd = platform_get_drvdata(pdev);
+
+	of_clk_del_provider(pdev->dev.of_node);
+
+	for (i = 0; i < WZRD_NUM_OUTPUTS; i++)
+		clk_unregister(clk_wzrd->clkout[i]);
+	for (i = 0; i < wzrd_clk_int_max; i++)
+		clk_unregister(clk_wzrd->clks_internal[i]);
+
+	if (clk_wzrd->speed_grade) {
+		clk_notifier_unregister(clk_wzrd->axi_clk, &clk_wzrd->nb);
+		clk_notifier_unregister(clk_wzrd->clk_in1, &clk_wzrd->nb);
+	}
+
+	clk_disable_unprepare(clk_wzrd->axi_clk);
+
+	return 0;
+}
+
+static const struct of_device_id clk_wzrd_ids[] = {
+	{ .compatible = "xlnx,clocking-wizard" },
+	{ .compatible = "xlnx,clocking-wizard-v5.2" },
+	{ .compatible = "xlnx,clocking-wizard-v6.0" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, clk_wzrd_ids);
+
+static struct platform_driver clk_wzrd_driver = {
+	.driver = {
+		.name = "clk-wizard",
+		.of_match_table = clk_wzrd_ids,
+		.pm = &clk_wzrd_dev_pm_ops,
+	},
+	.probe = clk_wzrd_probe,
+	.remove = clk_wzrd_remove,
+};
+module_platform_driver(clk_wzrd_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Soeren Brinkmann <soren.brinkmann@xilinx.com");
+MODULE_DESCRIPTION("Driver for the Xilinx Clocking Wizard IP core");
diff --git a/drivers/clk/xilinx/xlnx_vcu.c b/drivers/clk/xilinx/xlnx_vcu.c
new file mode 100644
index 000000000..d66b13151
--- /dev/null
+++ b/drivers/clk/xilinx/xlnx_vcu.c
@@ -0,0 +1,743 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Xilinx VCU Init
+ *
+ * Copyright (C) 2016 - 2017 Xilinx, Inc.
+ *
+ * Contacts   Dhaval Shah <dshah@xilinx.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/xlnx-vcu.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/xlnx-vcu.h>
+
+#define VCU_PLL_CTRL			0x24
+#define VCU_PLL_CTRL_RESET		BIT(0)
+#define VCU_PLL_CTRL_POR_IN		BIT(1)
+#define VCU_PLL_CTRL_PWR_POR		BIT(2)
+#define VCU_PLL_CTRL_BYPASS		BIT(3)
+#define VCU_PLL_CTRL_FBDIV		GENMASK(14, 8)
+#define VCU_PLL_CTRL_CLKOUTDIV		GENMASK(18, 16)
+
+#define VCU_PLL_CFG			0x28
+#define VCU_PLL_CFG_RES			GENMASK(3, 0)
+#define VCU_PLL_CFG_CP			GENMASK(8, 5)
+#define VCU_PLL_CFG_LFHF		GENMASK(12, 10)
+#define VCU_PLL_CFG_LOCK_CNT		GENMASK(22, 13)
+#define VCU_PLL_CFG_LOCK_DLY		GENMASK(31, 25)
+#define VCU_ENC_CORE_CTRL		0x30
+#define VCU_ENC_MCU_CTRL		0x34
+#define VCU_DEC_CORE_CTRL		0x38
+#define VCU_DEC_MCU_CTRL		0x3c
+#define VCU_PLL_STATUS			0x60
+#define VCU_PLL_STATUS_LOCK_STATUS	BIT(0)
+
+#define MHZ				1000000
+#define FVCO_MIN			(1500U * MHZ)
+#define FVCO_MAX			(3000U * MHZ)
+
+/**
+ * struct xvcu_device - Xilinx VCU init device structure
+ * @dev: Platform device
+ * @pll_ref: pll ref clock source
+ * @aclk: axi clock source
+ * @logicore_reg_ba: logicore reg base address
+ * @vcu_slcr_ba: vcu_slcr Register base address
+ * @pll: handle for the VCU PLL
+ * @pll_post: handle for the VCU PLL post divider
+ * @clk_data: clocks provided by the vcu clock provider
+ */
+struct xvcu_device {
+	struct device *dev;
+	struct clk *pll_ref;
+	struct clk *aclk;
+	struct regmap *logicore_reg_ba;
+	void __iomem *vcu_slcr_ba;
+	struct clk_hw *pll;
+	struct clk_hw *pll_post;
+	struct clk_hw_onecell_data *clk_data;
+};
+
+static struct regmap_config vcu_settings_regmap_config = {
+	.name = "regmap",
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0xfff,
+	.cache_type = REGCACHE_NONE,
+};
+
+/**
+ * struct xvcu_pll_cfg - Helper data
+ * @fbdiv: The integer portion of the feedback divider to the PLL
+ * @cp: PLL charge pump control
+ * @res: PLL loop filter resistor control
+ * @lfhf: PLL loop filter high frequency capacitor control
+ * @lock_dly: Lock circuit configuration settings for lock windowsize
+ * @lock_cnt: Lock circuit counter setting
+ */
+struct xvcu_pll_cfg {
+	u32 fbdiv;
+	u32 cp;
+	u32 res;
+	u32 lfhf;
+	u32 lock_dly;
+	u32 lock_cnt;
+};
+
+static const struct xvcu_pll_cfg xvcu_pll_cfg[] = {
+	{ 25, 3, 10, 3, 63, 1000 },
+	{ 26, 3, 10, 3, 63, 1000 },
+	{ 27, 4, 6, 3, 63, 1000 },
+	{ 28, 4, 6, 3, 63, 1000 },
+	{ 29, 4, 6, 3, 63, 1000 },
+	{ 30, 4, 6, 3, 63, 1000 },
+	{ 31, 6, 1, 3, 63, 1000 },
+	{ 32, 6, 1, 3, 63, 1000 },
+	{ 33, 4, 10, 3, 63, 1000 },
+	{ 34, 5, 6, 3, 63, 1000 },
+	{ 35, 5, 6, 3, 63, 1000 },
+	{ 36, 5, 6, 3, 63, 1000 },
+	{ 37, 5, 6, 3, 63, 1000 },
+	{ 38, 5, 6, 3, 63, 975 },
+	{ 39, 3, 12, 3, 63, 950 },
+	{ 40, 3, 12, 3, 63, 925 },
+	{ 41, 3, 12, 3, 63, 900 },
+	{ 42, 3, 12, 3, 63, 875 },
+	{ 43, 3, 12, 3, 63, 850 },
+	{ 44, 3, 12, 3, 63, 850 },
+	{ 45, 3, 12, 3, 63, 825 },
+	{ 46, 3, 12, 3, 63, 800 },
+	{ 47, 3, 12, 3, 63, 775 },
+	{ 48, 3, 12, 3, 63, 775 },
+	{ 49, 3, 12, 3, 63, 750 },
+	{ 50, 3, 12, 3, 63, 750 },
+	{ 51, 3, 2, 3, 63, 725 },
+	{ 52, 3, 2, 3, 63, 700 },
+	{ 53, 3, 2, 3, 63, 700 },
+	{ 54, 3, 2, 3, 63, 675 },
+	{ 55, 3, 2, 3, 63, 675 },
+	{ 56, 3, 2, 3, 63, 650 },
+	{ 57, 3, 2, 3, 63, 650 },
+	{ 58, 3, 2, 3, 63, 625 },
+	{ 59, 3, 2, 3, 63, 625 },
+	{ 60, 3, 2, 3, 63, 625 },
+	{ 61, 3, 2, 3, 63, 600 },
+	{ 62, 3, 2, 3, 63, 600 },
+	{ 63, 3, 2, 3, 63, 600 },
+	{ 64, 3, 2, 3, 63, 600 },
+	{ 65, 3, 2, 3, 63, 600 },
+	{ 66, 3, 2, 3, 63, 600 },
+	{ 67, 3, 2, 3, 63, 600 },
+	{ 68, 3, 2, 3, 63, 600 },
+	{ 69, 3, 2, 3, 63, 600 },
+	{ 70, 3, 2, 3, 63, 600 },
+	{ 71, 3, 2, 3, 63, 600 },
+	{ 72, 3, 2, 3, 63, 600 },
+	{ 73, 3, 2, 3, 63, 600 },
+	{ 74, 3, 2, 3, 63, 600 },
+	{ 75, 3, 2, 3, 63, 600 },
+	{ 76, 3, 2, 3, 63, 600 },
+	{ 77, 3, 2, 3, 63, 600 },
+	{ 78, 3, 2, 3, 63, 600 },
+	{ 79, 3, 2, 3, 63, 600 },
+	{ 80, 3, 2, 3, 63, 600 },
+	{ 81, 3, 2, 3, 63, 600 },
+	{ 82, 3, 2, 3, 63, 600 },
+	{ 83, 4, 2, 3, 63, 600 },
+	{ 84, 4, 2, 3, 63, 600 },
+	{ 85, 4, 2, 3, 63, 600 },
+	{ 86, 4, 2, 3, 63, 600 },
+	{ 87, 4, 2, 3, 63, 600 },
+	{ 88, 4, 2, 3, 63, 600 },
+	{ 89, 4, 2, 3, 63, 600 },
+	{ 90, 4, 2, 3, 63, 600 },
+	{ 91, 4, 2, 3, 63, 600 },
+	{ 92, 4, 2, 3, 63, 600 },
+	{ 93, 4, 2, 3, 63, 600 },
+	{ 94, 4, 2, 3, 63, 600 },
+	{ 95, 4, 2, 3, 63, 600 },
+	{ 96, 4, 2, 3, 63, 600 },
+	{ 97, 4, 2, 3, 63, 600 },
+	{ 98, 4, 2, 3, 63, 600 },
+	{ 99, 4, 2, 3, 63, 600 },
+	{ 100, 4, 2, 3, 63, 600 },
+	{ 101, 4, 2, 3, 63, 600 },
+	{ 102, 4, 2, 3, 63, 600 },
+	{ 103, 5, 2, 3, 63, 600 },
+	{ 104, 5, 2, 3, 63, 600 },
+	{ 105, 5, 2, 3, 63, 600 },
+	{ 106, 5, 2, 3, 63, 600 },
+	{ 107, 3, 4, 3, 63, 600 },
+	{ 108, 3, 4, 3, 63, 600 },
+	{ 109, 3, 4, 3, 63, 600 },
+	{ 110, 3, 4, 3, 63, 600 },
+	{ 111, 3, 4, 3, 63, 600 },
+	{ 112, 3, 4, 3, 63, 600 },
+	{ 113, 3, 4, 3, 63, 600 },
+	{ 114, 3, 4, 3, 63, 600 },
+	{ 115, 3, 4, 3, 63, 600 },
+	{ 116, 3, 4, 3, 63, 600 },
+	{ 117, 3, 4, 3, 63, 600 },
+	{ 118, 3, 4, 3, 63, 600 },
+	{ 119, 3, 4, 3, 63, 600 },
+	{ 120, 3, 4, 3, 63, 600 },
+	{ 121, 3, 4, 3, 63, 600 },
+	{ 122, 3, 4, 3, 63, 600 },
+	{ 123, 3, 4, 3, 63, 600 },
+	{ 124, 3, 4, 3, 63, 600 },
+	{ 125, 3, 4, 3, 63, 600 },
+};
+
+/**
+ * xvcu_read - Read from the VCU register space
+ * @iomem:	vcu reg space base address
+ * @offset:	vcu reg offset from base
+ *
+ * Return:	Returns 32bit value from VCU register specified
+ *
+ */
+static inline u32 xvcu_read(void __iomem *iomem, u32 offset)
+{
+	return ioread32(iomem + offset);
+}
+
+/**
+ * xvcu_write - Write to the VCU register space
+ * @iomem:	vcu reg space base address
+ * @offset:	vcu reg offset from base
+ * @value:	Value to write
+ */
+static inline void xvcu_write(void __iomem *iomem, u32 offset, u32 value)
+{
+	iowrite32(value, iomem + offset);
+}
+
+#define to_vcu_pll(_hw) container_of(_hw, struct vcu_pll, hw)
+
+struct vcu_pll {
+	struct clk_hw hw;
+	void __iomem *reg_base;
+	unsigned long fvco_min;
+	unsigned long fvco_max;
+};
+
+static int xvcu_pll_wait_for_lock(struct vcu_pll *pll)
+{
+	void __iomem *base = pll->reg_base;
+	unsigned long timeout;
+	u32 lock_status;
+
+	timeout = jiffies + msecs_to_jiffies(2000);
+	do {
+		lock_status = xvcu_read(base, VCU_PLL_STATUS);
+		if (lock_status & VCU_PLL_STATUS_LOCK_STATUS)
+			return 0;
+	} while (!time_after(jiffies, timeout));
+
+	return -ETIMEDOUT;
+}
+
+static struct clk_hw *xvcu_register_pll_post(struct device *dev,
+					     const char *name,
+					     const struct clk_hw *parent_hw,
+					     void __iomem *reg_base)
+{
+	u32 div;
+	u32 vcu_pll_ctrl;
+
+	/*
+	 * The output divider of the PLL must be set to 1/2 to meet the
+	 * timing in the design.
+	 */
+	vcu_pll_ctrl = xvcu_read(reg_base, VCU_PLL_CTRL);
+	div = FIELD_GET(VCU_PLL_CTRL_CLKOUTDIV, vcu_pll_ctrl);
+	if (div != 1)
+		return ERR_PTR(-EINVAL);
+
+	return clk_hw_register_fixed_factor(dev, "vcu_pll_post",
+					    clk_hw_get_name(parent_hw),
+					    CLK_SET_RATE_PARENT, 1, 2);
+}
+
+static const struct xvcu_pll_cfg *xvcu_find_cfg(int div)
+{
+	const struct xvcu_pll_cfg *cfg = NULL;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(xvcu_pll_cfg) - 1; i++)
+		if (xvcu_pll_cfg[i].fbdiv == div)
+			cfg = &xvcu_pll_cfg[i];
+
+	return cfg;
+}
+
+static int xvcu_pll_set_div(struct vcu_pll *pll, int div)
+{
+	void __iomem *base = pll->reg_base;
+	const struct xvcu_pll_cfg *cfg = NULL;
+	u32 vcu_pll_ctrl;
+	u32 cfg_val;
+
+	cfg = xvcu_find_cfg(div);
+	if (!cfg)
+		return -EINVAL;
+
+	vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
+	vcu_pll_ctrl &= ~VCU_PLL_CTRL_FBDIV;
+	vcu_pll_ctrl |= FIELD_PREP(VCU_PLL_CTRL_FBDIV, cfg->fbdiv);
+	xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
+
+	cfg_val = FIELD_PREP(VCU_PLL_CFG_RES, cfg->res) |
+		  FIELD_PREP(VCU_PLL_CFG_CP, cfg->cp) |
+		  FIELD_PREP(VCU_PLL_CFG_LFHF, cfg->lfhf) |
+		  FIELD_PREP(VCU_PLL_CFG_LOCK_CNT, cfg->lock_cnt) |
+		  FIELD_PREP(VCU_PLL_CFG_LOCK_DLY, cfg->lock_dly);
+	xvcu_write(base, VCU_PLL_CFG, cfg_val);
+
+	return 0;
+}
+
+static long xvcu_pll_round_rate(struct clk_hw *hw,
+				unsigned long rate, unsigned long *parent_rate)
+{
+	struct vcu_pll *pll = to_vcu_pll(hw);
+	unsigned int feedback_div;
+
+	rate = clamp_t(unsigned long, rate, pll->fvco_min, pll->fvco_max);
+
+	feedback_div = DIV_ROUND_CLOSEST_ULL(rate, *parent_rate);
+	feedback_div = clamp_t(unsigned int, feedback_div, 25, 125);
+
+	return *parent_rate * feedback_div;
+}
+
+static unsigned long xvcu_pll_recalc_rate(struct clk_hw *hw,
+					  unsigned long parent_rate)
+{
+	struct vcu_pll *pll = to_vcu_pll(hw);
+	void __iomem *base = pll->reg_base;
+	unsigned int div;
+	u32 vcu_pll_ctrl;
+
+	vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
+	div = FIELD_GET(VCU_PLL_CTRL_FBDIV, vcu_pll_ctrl);
+
+	return div * parent_rate;
+}
+
+static int xvcu_pll_set_rate(struct clk_hw *hw,
+			     unsigned long rate, unsigned long parent_rate)
+{
+	struct vcu_pll *pll = to_vcu_pll(hw);
+
+	return xvcu_pll_set_div(pll, rate / parent_rate);
+}
+
+static int xvcu_pll_enable(struct clk_hw *hw)
+{
+	struct vcu_pll *pll = to_vcu_pll(hw);
+	void __iomem *base = pll->reg_base;
+	u32 vcu_pll_ctrl;
+	int ret;
+
+	vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
+	vcu_pll_ctrl |= VCU_PLL_CTRL_BYPASS;
+	xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
+
+	vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
+	vcu_pll_ctrl &= ~VCU_PLL_CTRL_POR_IN;
+	vcu_pll_ctrl &= ~VCU_PLL_CTRL_PWR_POR;
+	vcu_pll_ctrl &= ~VCU_PLL_CTRL_RESET;
+	xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
+
+	ret = xvcu_pll_wait_for_lock(pll);
+	if (ret) {
+		pr_err("VCU PLL is not locked\n");
+		goto err;
+	}
+
+	vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
+	vcu_pll_ctrl &= ~VCU_PLL_CTRL_BYPASS;
+	xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
+
+err:
+	return ret;
+}
+
+static void xvcu_pll_disable(struct clk_hw *hw)
+{
+	struct vcu_pll *pll = to_vcu_pll(hw);
+	void __iomem *base = pll->reg_base;
+	u32 vcu_pll_ctrl;
+
+	vcu_pll_ctrl = xvcu_read(base, VCU_PLL_CTRL);
+	vcu_pll_ctrl |= VCU_PLL_CTRL_POR_IN;
+	vcu_pll_ctrl |= VCU_PLL_CTRL_PWR_POR;
+	vcu_pll_ctrl |= VCU_PLL_CTRL_RESET;
+	xvcu_write(base, VCU_PLL_CTRL, vcu_pll_ctrl);
+}
+
+static const struct clk_ops vcu_pll_ops = {
+	.enable = xvcu_pll_enable,
+	.disable = xvcu_pll_disable,
+	.round_rate = xvcu_pll_round_rate,
+	.recalc_rate = xvcu_pll_recalc_rate,
+	.set_rate = xvcu_pll_set_rate,
+};
+
+static struct clk_hw *xvcu_register_pll(struct device *dev,
+					void __iomem *reg_base,
+					const char *name, const char *parent,
+					unsigned long flags)
+{
+	struct vcu_pll *pll;
+	struct clk_hw *hw;
+	struct clk_init_data init;
+	int ret;
+
+	init.name = name;
+	init.parent_names = &parent;
+	init.ops = &vcu_pll_ops;
+	init.num_parents = 1;
+	init.flags = flags;
+
+	pll = devm_kmalloc(dev, sizeof(*pll), GFP_KERNEL);
+	if (!pll)
+		return ERR_PTR(-ENOMEM);
+
+	pll->hw.init = &init;
+	pll->reg_base = reg_base;
+	pll->fvco_min = FVCO_MIN;
+	pll->fvco_max = FVCO_MAX;
+
+	hw = &pll->hw;
+	ret = devm_clk_hw_register(dev, hw);
+	if (ret)
+		return ERR_PTR(ret);
+
+	clk_hw_set_rate_range(hw, pll->fvco_min, pll->fvco_max);
+
+	return hw;
+}
+
+static struct clk_hw *xvcu_clk_hw_register_leaf(struct device *dev,
+						const char *name,
+						const struct clk_parent_data *parent_data,
+						u8 num_parents,
+						void __iomem *reg)
+{
+	u8 mux_flags = CLK_MUX_ROUND_CLOSEST;
+	u8 divider_flags = CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO |
+			   CLK_DIVIDER_ROUND_CLOSEST;
+	struct clk_hw *mux = NULL;
+	struct clk_hw *divider = NULL;
+	struct clk_hw *gate = NULL;
+	char *name_mux;
+	char *name_div;
+	int err;
+	/* Protect register shared by clocks */
+	spinlock_t *lock;
+
+	lock = devm_kzalloc(dev, sizeof(*lock), GFP_KERNEL);
+	if (!lock)
+		return ERR_PTR(-ENOMEM);
+	spin_lock_init(lock);
+
+	name_mux = devm_kasprintf(dev, GFP_KERNEL, "%s%s", name, "_mux");
+	if (!name_mux)
+		return ERR_PTR(-ENOMEM);
+	mux = clk_hw_register_mux_parent_data(dev, name_mux,
+					      parent_data, num_parents,
+					      CLK_SET_RATE_PARENT,
+					      reg, 0, 1, mux_flags, lock);
+	if (IS_ERR(mux))
+		return mux;
+
+	name_div = devm_kasprintf(dev, GFP_KERNEL, "%s%s", name, "_div");
+	if (!name_div) {
+		err = -ENOMEM;
+		goto unregister_mux;
+	}
+	divider = clk_hw_register_divider_parent_hw(dev, name_div, mux,
+						    CLK_SET_RATE_PARENT,
+						    reg, 4, 6, divider_flags,
+						    lock);
+	if (IS_ERR(divider)) {
+		err = PTR_ERR(divider);
+		goto unregister_mux;
+	}
+
+	gate = clk_hw_register_gate_parent_hw(dev, name, divider,
+					      CLK_SET_RATE_PARENT, reg, 12, 0,
+					      lock);
+	if (IS_ERR(gate)) {
+		err = PTR_ERR(gate);
+		goto unregister_divider;
+	}
+
+	return gate;
+
+unregister_divider:
+	clk_hw_unregister_divider(divider);
+unregister_mux:
+	clk_hw_unregister_mux(mux);
+
+	return ERR_PTR(err);
+}
+
+static void xvcu_clk_hw_unregister_leaf(struct clk_hw *hw)
+{
+	struct clk_hw *gate = hw;
+	struct clk_hw *divider;
+	struct clk_hw *mux;
+
+	if (!gate)
+		return;
+
+	divider = clk_hw_get_parent(gate);
+	clk_hw_unregister_gate(gate);
+	if (!divider)
+		return;
+
+	mux = clk_hw_get_parent(divider);
+	clk_hw_unregister_mux(mux);
+	if (!divider)
+		return;
+
+	clk_hw_unregister_divider(divider);
+}
+
+static int xvcu_register_clock_provider(struct xvcu_device *xvcu)
+{
+	struct device *dev = xvcu->dev;
+	struct clk_parent_data parent_data[2] = { 0 };
+	struct clk_hw_onecell_data *data;
+	struct clk_hw **hws;
+	struct clk_hw *hw;
+	void __iomem *reg_base = xvcu->vcu_slcr_ba;
+
+	data = devm_kzalloc(dev, struct_size(data, hws, CLK_XVCU_NUM_CLOCKS), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	data->num = CLK_XVCU_NUM_CLOCKS;
+	hws = data->hws;
+
+	xvcu->clk_data = data;
+
+	hw = xvcu_register_pll(dev, reg_base,
+			       "vcu_pll", __clk_get_name(xvcu->pll_ref),
+			       CLK_SET_RATE_NO_REPARENT | CLK_OPS_PARENT_ENABLE);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	xvcu->pll = hw;
+
+	hw = xvcu_register_pll_post(dev, "vcu_pll_post", xvcu->pll, reg_base);
+	if (IS_ERR(hw))
+		return PTR_ERR(hw);
+	xvcu->pll_post = hw;
+
+	parent_data[0].fw_name = "pll_ref";
+	parent_data[1].hw = xvcu->pll_post;
+
+	hws[CLK_XVCU_ENC_CORE] =
+		xvcu_clk_hw_register_leaf(dev, "venc_core_clk",
+					  parent_data,
+					  ARRAY_SIZE(parent_data),
+					  reg_base + VCU_ENC_CORE_CTRL);
+	hws[CLK_XVCU_ENC_MCU] =
+		xvcu_clk_hw_register_leaf(dev, "venc_mcu_clk",
+					  parent_data,
+					  ARRAY_SIZE(parent_data),
+					  reg_base + VCU_ENC_MCU_CTRL);
+	hws[CLK_XVCU_DEC_CORE] =
+		xvcu_clk_hw_register_leaf(dev, "vdec_core_clk",
+					  parent_data,
+					  ARRAY_SIZE(parent_data),
+					  reg_base + VCU_DEC_CORE_CTRL);
+	hws[CLK_XVCU_DEC_MCU] =
+		xvcu_clk_hw_register_leaf(dev, "vdec_mcu_clk",
+					  parent_data,
+					  ARRAY_SIZE(parent_data),
+					  reg_base + VCU_DEC_MCU_CTRL);
+
+	return devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get, data);
+}
+
+static void xvcu_unregister_clock_provider(struct xvcu_device *xvcu)
+{
+	struct clk_hw_onecell_data *data = xvcu->clk_data;
+	struct clk_hw **hws = data->hws;
+
+	if (!IS_ERR_OR_NULL(hws[CLK_XVCU_DEC_MCU]))
+		xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_DEC_MCU]);
+	if (!IS_ERR_OR_NULL(hws[CLK_XVCU_DEC_CORE]))
+		xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_DEC_CORE]);
+	if (!IS_ERR_OR_NULL(hws[CLK_XVCU_ENC_MCU]))
+		xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_ENC_MCU]);
+	if (!IS_ERR_OR_NULL(hws[CLK_XVCU_ENC_CORE]))
+		xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_ENC_CORE]);
+
+	clk_hw_unregister_fixed_factor(xvcu->pll_post);
+}
+
+/**
+ * xvcu_probe - Probe existence of the logicoreIP
+ *			and initialize PLL
+ *
+ * @pdev:	Pointer to the platform_device structure
+ *
+ * Return:	Returns 0 on success
+ *		Negative error code otherwise
+ */
+static int xvcu_probe(struct platform_device *pdev)
+{
+	struct resource *res;
+	struct xvcu_device *xvcu;
+	void __iomem *regs;
+	int ret;
+
+	xvcu = devm_kzalloc(&pdev->dev, sizeof(*xvcu), GFP_KERNEL);
+	if (!xvcu)
+		return -ENOMEM;
+
+	xvcu->dev = &pdev->dev;
+	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vcu_slcr");
+	if (!res) {
+		dev_err(&pdev->dev, "get vcu_slcr memory resource failed.\n");
+		return -ENODEV;
+	}
+
+	xvcu->vcu_slcr_ba = devm_ioremap(&pdev->dev, res->start,
+					 resource_size(res));
+	if (!xvcu->vcu_slcr_ba) {
+		dev_err(&pdev->dev, "vcu_slcr register mapping failed.\n");
+		return -ENOMEM;
+	}
+
+	xvcu->logicore_reg_ba =
+		syscon_regmap_lookup_by_compatible("xlnx,vcu-settings");
+	if (IS_ERR(xvcu->logicore_reg_ba)) {
+		dev_info(&pdev->dev,
+			 "could not find xlnx,vcu-settings: trying direct register access\n");
+
+		res = platform_get_resource_byname(pdev,
+						   IORESOURCE_MEM, "logicore");
+		if (!res) {
+			dev_err(&pdev->dev, "get logicore memory resource failed.\n");
+			return -ENODEV;
+		}
+
+		regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+		if (!regs) {
+			dev_err(&pdev->dev, "logicore register mapping failed.\n");
+			return -ENOMEM;
+		}
+
+		xvcu->logicore_reg_ba =
+			devm_regmap_init_mmio(&pdev->dev, regs,
+					      &vcu_settings_regmap_config);
+		if (IS_ERR(xvcu->logicore_reg_ba)) {
+			dev_err(&pdev->dev, "failed to init regmap\n");
+			return PTR_ERR(xvcu->logicore_reg_ba);
+		}
+	}
+
+	xvcu->aclk = devm_clk_get(&pdev->dev, "aclk");
+	if (IS_ERR(xvcu->aclk)) {
+		dev_err(&pdev->dev, "Could not get aclk clock\n");
+		return PTR_ERR(xvcu->aclk);
+	}
+
+	xvcu->pll_ref = devm_clk_get(&pdev->dev, "pll_ref");
+	if (IS_ERR(xvcu->pll_ref)) {
+		dev_err(&pdev->dev, "Could not get pll_ref clock\n");
+		return PTR_ERR(xvcu->pll_ref);
+	}
+
+	ret = clk_prepare_enable(xvcu->aclk);
+	if (ret) {
+		dev_err(&pdev->dev, "aclk clock enable failed\n");
+		return ret;
+	}
+
+	/*
+	 * Do the Gasket isolation and put the VCU out of reset
+	 * Bit 0 : Gasket isolation
+	 * Bit 1 : put VCU out of reset
+	 */
+	regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE);
+
+	ret = xvcu_register_clock_provider(xvcu);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register clock provider\n");
+		goto error_clk_provider;
+	}
+
+	dev_set_drvdata(&pdev->dev, xvcu);
+
+	return 0;
+
+error_clk_provider:
+	xvcu_unregister_clock_provider(xvcu);
+	clk_disable_unprepare(xvcu->aclk);
+	return ret;
+}
+
+/**
+ * xvcu_remove - Insert gasket isolation
+ *			and disable the clock
+ * @pdev:	Pointer to the platform_device structure
+ *
+ * Return:	Returns 0 on success
+ *		Negative error code otherwise
+ */
+static int xvcu_remove(struct platform_device *pdev)
+{
+	struct xvcu_device *xvcu;
+
+	xvcu = platform_get_drvdata(pdev);
+	if (!xvcu)
+		return -ENODEV;
+
+	xvcu_unregister_clock_provider(xvcu);
+
+	/* Add the Gasket isolation and put the VCU in reset. */
+	regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0);
+
+	clk_disable_unprepare(xvcu->aclk);
+
+	return 0;
+}
+
+static const struct of_device_id xvcu_of_id_table[] = {
+	{ .compatible = "xlnx,vcu" },
+	{ .compatible = "xlnx,vcu-logicoreip-1.0" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, xvcu_of_id_table);
+
+static struct platform_driver xvcu_driver = {
+	.driver = {
+		.name           = "xilinx-vcu",
+		.of_match_table = xvcu_of_id_table,
+	},
+	.probe                  = xvcu_probe,
+	.remove                 = xvcu_remove,
+};
+
+module_platform_driver(xvcu_driver);
+
+MODULE_AUTHOR("Dhaval Shah <dshah@xilinx.com>");
+MODULE_DESCRIPTION("Xilinx VCU init Driver");
+MODULE_LICENSE("GPL v2");