Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 195 insertions, 0 deletions

diff --git a/drivers/clocksource/timer-riscv.c b/drivers/clocksource/timer-riscv.c
new file mode 100644
index 000000000..a01c2bd24
--- /dev/null
+++ b/drivers/clocksource/timer-riscv.c
@@ -0,0 +1,195 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2012 Regents of the University of California
+ * Copyright (C) 2017 SiFive
+ *
+ * All RISC-V systems have a timer attached to every hart.  These timers can
+ * either be read from the "time" and "timeh" CSRs, and can use the SBI to
+ * setup events, or directly accessed using MMIO registers.
+ */
+
+#define pr_fmt(fmt) "riscv-timer: " fmt
+
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/cpu.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/module.h>
+#include <linux/sched_clock.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/interrupt.h>
+#include <linux/of_irq.h>
+#include <clocksource/timer-riscv.h>
+#include <asm/smp.h>
+#include <asm/hwcap.h>
+#include <asm/sbi.h>
+#include <asm/timex.h>
+
+static DEFINE_STATIC_KEY_FALSE(riscv_sstc_available);
+
+static int riscv_clock_next_event(unsigned long delta,
+		struct clock_event_device *ce)
+{
+	u64 next_tval = get_cycles64() + delta;
+
+	csr_set(CSR_IE, IE_TIE);
+	if (static_branch_likely(&riscv_sstc_available)) {
+#if defined(CONFIG_32BIT)
+		csr_write(CSR_STIMECMP, next_tval & 0xFFFFFFFF);
+		csr_write(CSR_STIMECMPH, next_tval >> 32);
+#else
+		csr_write(CSR_STIMECMP, next_tval);
+#endif
+	} else
+		sbi_set_timer(next_tval);
+
+	return 0;
+}
+
+static unsigned int riscv_clock_event_irq;
+static DEFINE_PER_CPU(struct clock_event_device, riscv_clock_event) = {
+	.name			= "riscv_timer_clockevent",
+	.features		= CLOCK_EVT_FEAT_ONESHOT,
+	.rating			= 100,
+	.set_next_event		= riscv_clock_next_event,
+};
+
+/*
+ * It is guaranteed that all the timers across all the harts are synchronized
+ * within one tick of each other, so while this could technically go
+ * backwards when hopping between CPUs, practically it won't happen.
+ */
+static unsigned long long riscv_clocksource_rdtime(struct clocksource *cs)
+{
+	return get_cycles64();
+}
+
+static u64 notrace riscv_sched_clock(void)
+{
+	return get_cycles64();
+}
+
+static struct clocksource riscv_clocksource = {
+	.name		= "riscv_clocksource",
+	.rating		= 300,
+	.mask		= CLOCKSOURCE_MASK(64),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+	.read		= riscv_clocksource_rdtime,
+};
+
+static int riscv_timer_starting_cpu(unsigned int cpu)
+{
+	struct clock_event_device *ce = per_cpu_ptr(&riscv_clock_event, cpu);
+
+	ce->cpumask = cpumask_of(cpu);
+	ce->irq = riscv_clock_event_irq;
+	clockevents_config_and_register(ce, riscv_timebase, 100, 0x7fffffff);
+
+	enable_percpu_irq(riscv_clock_event_irq,
+			  irq_get_trigger_type(riscv_clock_event_irq));
+	return 0;
+}
+
+static int riscv_timer_dying_cpu(unsigned int cpu)
+{
+	disable_percpu_irq(riscv_clock_event_irq);
+	return 0;
+}
+
+void riscv_cs_get_mult_shift(u32 *mult, u32 *shift)
+{
+	*mult = riscv_clocksource.mult;
+	*shift = riscv_clocksource.shift;
+}
+EXPORT_SYMBOL_GPL(riscv_cs_get_mult_shift);
+
+/* called directly from the low-level interrupt handler */
+static irqreturn_t riscv_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evdev = this_cpu_ptr(&riscv_clock_event);
+
+	csr_clear(CSR_IE, IE_TIE);
+	evdev->event_handler(evdev);
+
+	return IRQ_HANDLED;
+}
+
+static int __init riscv_timer_init_dt(struct device_node *n)
+{
+	int cpuid, error;
+	unsigned long hartid;
+	struct device_node *child;
+	struct irq_domain *domain;
+
+	error = riscv_of_processor_hartid(n, &hartid);
+	if (error < 0) {
+		pr_warn("Not valid hartid for node [%pOF] error = [%lu]\n",
+			n, hartid);
+		return error;
+	}
+
+	cpuid = riscv_hartid_to_cpuid(hartid);
+	if (cpuid < 0) {
+		pr_warn("Invalid cpuid for hartid [%lu]\n", hartid);
+		return cpuid;
+	}
+
+	if (cpuid != smp_processor_id())
+		return 0;
+
+	domain = NULL;
+	child = of_get_compatible_child(n, "riscv,cpu-intc");
+	if (!child) {
+		pr_err("Failed to find INTC node [%pOF]\n", n);
+		return -ENODEV;
+	}
+	domain = irq_find_host(child);
+	of_node_put(child);
+	if (!domain) {
+		pr_err("Failed to find IRQ domain for node [%pOF]\n", n);
+		return -ENODEV;
+	}
+
+	riscv_clock_event_irq = irq_create_mapping(domain, RV_IRQ_TIMER);
+	if (!riscv_clock_event_irq) {
+		pr_err("Failed to map timer interrupt for node [%pOF]\n", n);
+		return -ENODEV;
+	}
+
+	pr_info("%s: Registering clocksource cpuid [%d] hartid [%lu]\n",
+	       __func__, cpuid, hartid);
+	error = clocksource_register_hz(&riscv_clocksource, riscv_timebase);
+	if (error) {
+		pr_err("RISCV timer register failed [%d] for cpu = [%d]\n",
+		       error, cpuid);
+		return error;
+	}
+
+	sched_clock_register(riscv_sched_clock, 64, riscv_timebase);
+
+	error = request_percpu_irq(riscv_clock_event_irq,
+				    riscv_timer_interrupt,
+				    "riscv-timer", &riscv_clock_event);
+	if (error) {
+		pr_err("registering percpu irq failed [%d]\n", error);
+		return error;
+	}
+
+	if (riscv_isa_extension_available(NULL, SSTC)) {
+		pr_info("Timer interrupt in S-mode is available via sstc extension\n");
+		static_branch_enable(&riscv_sstc_available);
+	}
+
+	error = cpuhp_setup_state(CPUHP_AP_RISCV_TIMER_STARTING,
+			 "clockevents/riscv/timer:starting",
+			 riscv_timer_starting_cpu, riscv_timer_dying_cpu);
+	if (error)
+		pr_err("cpu hp setup state failed for RISCV timer [%d]\n",
+		       error);
+
+	return error;
+}
+
+TIMER_OF_DECLARE(riscv_timer, "riscv", riscv_timer_init_dt);