Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 227 insertions, 0 deletions

diff --git a/drivers/comedi/comedi_pci.c b/drivers/comedi/comedi_pci.c
new file mode 100644
index 000000000..cc2581902
--- /dev/null
+++ b/drivers/comedi/comedi_pci.c
@@ -0,0 +1,227 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * comedi_pci.c
+ * Comedi PCI driver specific functions.
+ *
+ * COMEDI - Linux Control and Measurement Device Interface
+ * Copyright (C) 1997-2000 David A. Schleef <ds@schleef.org>
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/comedi/comedi_pci.h>
+
+/**
+ * comedi_to_pci_dev() - Return PCI device attached to COMEDI device
+ * @dev: COMEDI device.
+ *
+ * Assuming @dev->hw_dev is non-%NULL, it is assumed to be pointing to a
+ * a &struct device embedded in a &struct pci_dev.
+ *
+ * Return: Attached PCI device if @dev->hw_dev is non-%NULL.
+ * Return %NULL if @dev->hw_dev is %NULL.
+ */
+struct pci_dev *comedi_to_pci_dev(struct comedi_device *dev)
+{
+	return dev->hw_dev ? to_pci_dev(dev->hw_dev) : NULL;
+}
+EXPORT_SYMBOL_GPL(comedi_to_pci_dev);
+
+/**
+ * comedi_pci_enable() - Enable the PCI device and request the regions
+ * @dev: COMEDI device.
+ *
+ * Assuming @dev->hw_dev is non-%NULL, it is assumed to be pointing to a
+ * a &struct device embedded in a &struct pci_dev.  Enable the PCI device
+ * and request its regions.  Set @dev->ioenabled to %true if successful,
+ * otherwise undo what was done.
+ *
+ * Calls to comedi_pci_enable() and comedi_pci_disable() cannot be nested.
+ *
+ * Return:
+ *	0 on success,
+ *	-%ENODEV if @dev->hw_dev is %NULL,
+ *	-%EBUSY if regions busy,
+ *	or some negative error number if failed to enable PCI device.
+ *
+ */
+int comedi_pci_enable(struct comedi_device *dev)
+{
+	struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+	int rc;
+
+	if (!pcidev)
+		return -ENODEV;
+
+	rc = pci_enable_device(pcidev);
+	if (rc < 0)
+		return rc;
+
+	rc = pci_request_regions(pcidev, dev->board_name);
+	if (rc < 0)
+		pci_disable_device(pcidev);
+	else
+		dev->ioenabled = true;
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(comedi_pci_enable);
+
+/**
+ * comedi_pci_disable() - Release the regions and disable the PCI device
+ * @dev: COMEDI device.
+ *
+ * Assuming @dev->hw_dev is non-%NULL, it is assumed to be pointing to a
+ * a &struct device embedded in a &struct pci_dev.  If the earlier call
+ * to comedi_pci_enable() was successful, release the PCI device's regions
+ * and disable it.  Reset @dev->ioenabled back to %false.
+ */
+void comedi_pci_disable(struct comedi_device *dev)
+{
+	struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+
+	if (pcidev && dev->ioenabled) {
+		pci_release_regions(pcidev);
+		pci_disable_device(pcidev);
+	}
+	dev->ioenabled = false;
+}
+EXPORT_SYMBOL_GPL(comedi_pci_disable);
+
+/**
+ * comedi_pci_detach() - A generic "detach" handler for PCI COMEDI drivers
+ * @dev: COMEDI device.
+ *
+ * COMEDI drivers for PCI devices that need no special clean-up of private data
+ * and have no ioremapped regions other than that pointed to by @dev->mmio may
+ * use this function as its "detach" handler called by the COMEDI core when a
+ * COMEDI device is being detached from the low-level driver.  It may be also
+ * called from a more specific "detach" handler that does additional clean-up.
+ *
+ * Free the IRQ if @dev->irq is non-zero, iounmap @dev->mmio if it is
+ * non-%NULL, and call comedi_pci_disable() to release the PCI device's regions
+ * and disable it.
+ */
+void comedi_pci_detach(struct comedi_device *dev)
+{
+	struct pci_dev *pcidev = comedi_to_pci_dev(dev);
+
+	if (!pcidev || !dev->ioenabled)
+		return;
+
+	if (dev->irq) {
+		free_irq(dev->irq, dev);
+		dev->irq = 0;
+	}
+	if (dev->mmio) {
+		iounmap(dev->mmio);
+		dev->mmio = NULL;
+	}
+	comedi_pci_disable(dev);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_detach);
+
+/**
+ * comedi_pci_auto_config() - Configure/probe a PCI COMEDI device
+ * @pcidev: PCI device.
+ * @driver: Registered COMEDI driver.
+ * @context: Driver specific data, passed to comedi_auto_config().
+ *
+ * Typically called from the pci_driver (*probe) function.  Auto-configure
+ * a COMEDI device, using the &struct device embedded in *@pcidev as the
+ * hardware device.  The @context value gets passed through to @driver's
+ * "auto_attach" handler.  The "auto_attach" handler may call
+ * comedi_to_pci_dev() on the passed in COMEDI device to recover @pcidev.
+ *
+ * Return: The result of calling comedi_auto_config() (0 on success, or
+ * a negative error number on failure).
+ */
+int comedi_pci_auto_config(struct pci_dev *pcidev,
+			   struct comedi_driver *driver,
+			   unsigned long context)
+{
+	return comedi_auto_config(&pcidev->dev, driver, context);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_auto_config);
+
+/**
+ * comedi_pci_auto_unconfig() - Unconfigure/remove a PCI COMEDI device
+ * @pcidev: PCI device.
+ *
+ * Typically called from the pci_driver (*remove) function.  Auto-unconfigure
+ * a COMEDI device attached to this PCI device, using a pointer to the
+ * &struct device embedded in *@pcidev as the hardware device.  The COMEDI
+ * driver's "detach" handler will be called during unconfiguration of the
+ * COMEDI device.
+ *
+ * Note that the COMEDI device may have already been unconfigured using the
+ * %COMEDI_DEVCONFIG ioctl, in which case this attempt to unconfigure it
+ * again should be ignored.
+ */
+void comedi_pci_auto_unconfig(struct pci_dev *pcidev)
+{
+	comedi_auto_unconfig(&pcidev->dev);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_auto_unconfig);
+
+/**
+ * comedi_pci_driver_register() - Register a PCI COMEDI driver
+ * @comedi_driver: COMEDI driver to be registered.
+ * @pci_driver: PCI driver to be registered.
+ *
+ * This function is called from the module_init() of PCI COMEDI driver modules
+ * to register the COMEDI driver and the PCI driver.  Do not call it directly,
+ * use the module_comedi_pci_driver() helper macro instead.
+ *
+ * Return: 0 on success, or a negative error number on failure.
+ */
+int comedi_pci_driver_register(struct comedi_driver *comedi_driver,
+			       struct pci_driver *pci_driver)
+{
+	int ret;
+
+	ret = comedi_driver_register(comedi_driver);
+	if (ret < 0)
+		return ret;
+
+	ret = pci_register_driver(pci_driver);
+	if (ret < 0) {
+		comedi_driver_unregister(comedi_driver);
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(comedi_pci_driver_register);
+
+/**
+ * comedi_pci_driver_unregister() - Unregister a PCI COMEDI driver
+ * @comedi_driver: COMEDI driver to be unregistered.
+ * @pci_driver: PCI driver to be unregistered.
+ *
+ * This function is called from the module_exit() of PCI COMEDI driver modules
+ * to unregister the PCI driver and the COMEDI driver.  Do not call it
+ * directly, use the module_comedi_pci_driver() helper macro instead.
+ */
+void comedi_pci_driver_unregister(struct comedi_driver *comedi_driver,
+				  struct pci_driver *pci_driver)
+{
+	pci_unregister_driver(pci_driver);
+	comedi_driver_unregister(comedi_driver);
+}
+EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
+
+static int __init comedi_pci_init(void)
+{
+	return 0;
+}
+module_init(comedi_pci_init);
+
+static void __exit comedi_pci_exit(void)
+{
+}
+module_exit(comedi_pci_exit);
+
+MODULE_AUTHOR("https://www.comedi.org");
+MODULE_DESCRIPTION("Comedi PCI interface module");
+MODULE_LICENSE("GPL");