Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 335 insertions, 0 deletions

diff --git a/drivers/crypto/caam/dpseci.h b/drivers/crypto/caam/dpseci.h
new file mode 100644
index 000000000..6dcd9be81
--- /dev/null
+++ b/drivers/crypto/caam/dpseci.h
@@ -0,0 +1,335 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
+/*
+ * Copyright 2013-2016 Freescale Semiconductor Inc.
+ * Copyright 2017-2018 NXP
+ */
+#ifndef _DPSECI_H_
+#define _DPSECI_H_
+
+/*
+ * Data Path SEC Interface API
+ * Contains initialization APIs and runtime control APIs for DPSECI
+ */
+
+struct fsl_mc_io;
+
+/**
+ * General DPSECI macros
+ */
+
+/**
+ * Maximum number of Tx/Rx queues per DPSECI object
+ */
+#define DPSECI_MAX_QUEUE_NUM		16
+
+/**
+ * All queues considered; see dpseci_set_rx_queue()
+ */
+#define DPSECI_ALL_QUEUES	(u8)(-1)
+
+int dpseci_open(struct fsl_mc_io *mc_io, u32 cmd_flags, int dpseci_id,
+		u16 *token);
+
+int dpseci_close(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
+
+/**
+ * Enable the Congestion Group support
+ */
+#define DPSECI_OPT_HAS_CG		0x000020
+
+/**
+ * struct dpseci_cfg - Structure representing DPSECI configuration
+ * @options: Any combination of the following flags:
+ *		DPSECI_OPT_HAS_CG
+ * @num_tx_queues: num of queues towards the SEC
+ * @num_rx_queues: num of queues back from the SEC
+ * @priorities: Priorities for the SEC hardware processing;
+ *		each place in the array is the priority of the tx queue
+ *		towards the SEC;
+ *		valid priorities are configured with values 1-8;
+ */
+struct dpseci_cfg {
+	u32 options;
+	u8 num_tx_queues;
+	u8 num_rx_queues;
+	u8 priorities[DPSECI_MAX_QUEUE_NUM];
+};
+
+int dpseci_enable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
+
+int dpseci_disable(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
+
+int dpseci_reset(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token);
+
+int dpseci_is_enabled(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
+		      int *en);
+
+/**
+ * struct dpseci_attr - Structure representing DPSECI attributes
+ * @id: DPSECI object ID
+ * @num_tx_queues: number of queues towards the SEC
+ * @num_rx_queues: number of queues back from the SEC
+ * @options: any combination of the following flags:
+ *		DPSECI_OPT_HAS_CG
+ */
+struct dpseci_attr {
+	int id;
+	u8 num_tx_queues;
+	u8 num_rx_queues;
+	u32 options;
+};
+
+int dpseci_get_attributes(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
+			  struct dpseci_attr *attr);
+
+/**
+ * enum dpseci_dest - DPSECI destination types
+ * @DPSECI_DEST_NONE: Unassigned destination; The queue is set in parked mode
+ *	and does not generate FQDAN notifications; user is expected to dequeue
+ *	from the queue based on polling or other user-defined method
+ * @DPSECI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN
+ *	notifications to the specified DPIO; user is expected to dequeue from
+ *	the queue only after notification is received
+ * @DPSECI_DEST_DPCON: The queue is set in schedule mode and does not generate
+ *	FQDAN notifications, but is connected to the specified DPCON object;
+ *	user is expected to dequeue from the DPCON channel
+ */
+enum dpseci_dest {
+	DPSECI_DEST_NONE = 0,
+	DPSECI_DEST_DPIO,
+	DPSECI_DEST_DPCON
+};
+
+/**
+ * struct dpseci_dest_cfg - Structure representing DPSECI destination parameters
+ * @dest_type: Destination type
+ * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type
+ * @priority: Priority selection within the DPIO or DPCON channel; valid values
+ *	are 0-1 or 0-7, depending on the number of priorities in that channel;
+ *	not relevant for 'DPSECI_DEST_NONE' option
+ */
+struct dpseci_dest_cfg {
+	enum dpseci_dest dest_type;
+	int dest_id;
+	u8 priority;
+};
+
+/**
+ * DPSECI queue modification options
+ */
+
+/**
+ * Select to modify the user's context associated with the queue
+ */
+#define DPSECI_QUEUE_OPT_USER_CTX		0x00000001
+
+/**
+ * Select to modify the queue's destination
+ */
+#define DPSECI_QUEUE_OPT_DEST			0x00000002
+
+/**
+ * Select to modify the queue's order preservation
+ */
+#define DPSECI_QUEUE_OPT_ORDER_PRESERVATION	0x00000004
+
+/**
+ * struct dpseci_rx_queue_cfg - DPSECI RX queue configuration
+ * @options: Flags representing the suggested modifications to the queue;
+ *	Use any combination of 'DPSECI_QUEUE_OPT_<X>' flags
+ * @order_preservation_en: order preservation configuration for the rx queue
+ * valid only if 'DPSECI_QUEUE_OPT_ORDER_PRESERVATION' is contained in 'options'
+ * @user_ctx: User context value provided in the frame descriptor of each
+ *	dequeued frame;	valid only if 'DPSECI_QUEUE_OPT_USER_CTX' is contained
+ *	in 'options'
+ * @dest_cfg: Queue destination parameters; valid only if
+ *	'DPSECI_QUEUE_OPT_DEST' is contained in 'options'
+ */
+struct dpseci_rx_queue_cfg {
+	u32 options;
+	int order_preservation_en;
+	u64 user_ctx;
+	struct dpseci_dest_cfg dest_cfg;
+};
+
+int dpseci_set_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
+			u8 queue, const struct dpseci_rx_queue_cfg *cfg);
+
+/**
+ * struct dpseci_rx_queue_attr - Structure representing attributes of Rx queues
+ * @user_ctx: User context value provided in the frame descriptor of each
+ *	dequeued frame
+ * @order_preservation_en: Status of the order preservation configuration on the
+ *	queue
+ * @dest_cfg: Queue destination configuration
+ * @fqid: Virtual FQID value to be used for dequeue operations
+ */
+struct dpseci_rx_queue_attr {
+	u64 user_ctx;
+	int order_preservation_en;
+	struct dpseci_dest_cfg dest_cfg;
+	u32 fqid;
+};
+
+int dpseci_get_rx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
+			u8 queue, struct dpseci_rx_queue_attr *attr);
+
+/**
+ * struct dpseci_tx_queue_attr - Structure representing attributes of Tx queues
+ * @fqid: Virtual FQID to be used for sending frames to SEC hardware
+ * @priority: SEC hardware processing priority for the queue
+ */
+struct dpseci_tx_queue_attr {
+	u32 fqid;
+	u8 priority;
+};
+
+int dpseci_get_tx_queue(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
+			u8 queue, struct dpseci_tx_queue_attr *attr);
+
+/**
+ * struct dpseci_sec_attr - Structure representing attributes of the SEC
+ *	hardware accelerator
+ * @ip_id: ID for SEC
+ * @major_rev: Major revision number for SEC
+ * @minor_rev: Minor revision number for SEC
+ * @era: SEC Era
+ * @deco_num: The number of copies of the DECO that are implemented in this
+ *	version of SEC
+ * @zuc_auth_acc_num: The number of copies of ZUCA that are implemented in this
+ *	version of SEC
+ * @zuc_enc_acc_num: The number of copies of ZUCE that are implemented in this
+ *	version of SEC
+ * @snow_f8_acc_num: The number of copies of the SNOW-f8 module that are
+ *	implemented in this version of SEC
+ * @snow_f9_acc_num: The number of copies of the SNOW-f9 module that are
+ *	implemented in this version of SEC
+ * @crc_acc_num: The number of copies of the CRC module that are implemented in
+ *	this version of SEC
+ * @pk_acc_num:  The number of copies of the Public Key module that are
+ *	implemented in this version of SEC
+ * @kasumi_acc_num: The number of copies of the Kasumi module that are
+ *	implemented in this version of SEC
+ * @rng_acc_num: The number of copies of the Random Number Generator that are
+ *	implemented in this version of SEC
+ * @md_acc_num: The number of copies of the MDHA (Hashing module) that are
+ *	implemented in this version of SEC
+ * @arc4_acc_num: The number of copies of the ARC4 module that are implemented
+ *	in this version of SEC
+ * @des_acc_num: The number of copies of the DES module that are implemented in
+ *	this version of SEC
+ * @aes_acc_num: The number of copies of the AES module that are implemented in
+ *	this version of SEC
+ * @ccha_acc_num: The number of copies of the ChaCha20 module that are
+ *	implemented in this version of SEC.
+ * @ptha_acc_num: The number of copies of the Poly1305 module that are
+ *	implemented in this version of SEC.
+ **/
+struct dpseci_sec_attr {
+	u16 ip_id;
+	u8 major_rev;
+	u8 minor_rev;
+	u8 era;
+	u8 deco_num;
+	u8 zuc_auth_acc_num;
+	u8 zuc_enc_acc_num;
+	u8 snow_f8_acc_num;
+	u8 snow_f9_acc_num;
+	u8 crc_acc_num;
+	u8 pk_acc_num;
+	u8 kasumi_acc_num;
+	u8 rng_acc_num;
+	u8 md_acc_num;
+	u8 arc4_acc_num;
+	u8 des_acc_num;
+	u8 aes_acc_num;
+	u8 ccha_acc_num;
+	u8 ptha_acc_num;
+};
+
+int dpseci_get_sec_attr(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token,
+			struct dpseci_sec_attr *attr);
+
+int dpseci_get_api_version(struct fsl_mc_io *mc_io, u32 cmd_flags,
+			   u16 *major_ver, u16 *minor_ver);
+
+/**
+ * enum dpseci_congestion_unit - DPSECI congestion units
+ * @DPSECI_CONGESTION_UNIT_BYTES: bytes units
+ * @DPSECI_CONGESTION_UNIT_FRAMES: frames units
+ */
+enum dpseci_congestion_unit {
+	DPSECI_CONGESTION_UNIT_BYTES = 0,
+	DPSECI_CONGESTION_UNIT_FRAMES
+};
+
+/**
+ * CSCN message is written to message_iova once entering a
+ * congestion state (see 'threshold_entry')
+ */
+#define DPSECI_CGN_MODE_WRITE_MEM_ON_ENTER		0x00000001
+
+/**
+ * CSCN message is written to message_iova once exiting a
+ * congestion state (see 'threshold_exit')
+ */
+#define DPSECI_CGN_MODE_WRITE_MEM_ON_EXIT		0x00000002
+
+/**
+ * CSCN write will attempt to allocate into a cache (coherent write);
+ * valid only if 'DPSECI_CGN_MODE_WRITE_MEM_<X>' is selected
+ */
+#define DPSECI_CGN_MODE_COHERENT_WRITE			0x00000004
+
+/**
+ * if 'dpseci_dest_cfg.dest_type != DPSECI_DEST_NONE' CSCN message is sent to
+ * DPIO/DPCON's WQ channel once entering a congestion state
+ * (see 'threshold_entry')
+ */
+#define DPSECI_CGN_MODE_NOTIFY_DEST_ON_ENTER		0x00000008
+
+/**
+ * if 'dpseci_dest_cfg.dest_type != DPSECI_DEST_NONE' CSCN message is sent to
+ * DPIO/DPCON's WQ channel once exiting a congestion state
+ * (see 'threshold_exit')
+ */
+#define DPSECI_CGN_MODE_NOTIFY_DEST_ON_EXIT		0x00000010
+
+/**
+ * if 'dpseci_dest_cfg.dest_type != DPSECI_DEST_NONE' when the CSCN is written
+ * to the sw-portal's DQRR, the DQRI interrupt is asserted immediately
+ * (if enabled)
+ */
+#define DPSECI_CGN_MODE_INTR_COALESCING_DISABLED	0x00000020
+
+/**
+ * struct dpseci_congestion_notification_cfg - congestion notification
+ *	configuration
+ * @units: units type
+ * @threshold_entry: above this threshold we enter a congestion state.
+ *	set it to '0' to disable it
+ * @threshold_exit: below this threshold we exit the congestion state.
+ * @message_ctx: The context that will be part of the CSCN message
+ * @message_iova: I/O virtual address (must be in DMA-able memory),
+ *	must be 16B aligned;
+ * @dest_cfg: CSCN can be send to either DPIO or DPCON WQ channel
+ * @notification_mode: Mask of available options; use 'DPSECI_CGN_MODE_<X>'
+ *	values
+ */
+struct dpseci_congestion_notification_cfg {
+	enum dpseci_congestion_unit units;
+	u32 threshold_entry;
+	u32 threshold_exit;
+	u64 message_ctx;
+	u64 message_iova;
+	struct dpseci_dest_cfg dest_cfg;
+	u16 notification_mode;
+};
+
+int dpseci_set_congestion_notification(struct fsl_mc_io *mc_io, u32 cmd_flags,
+	u16 token, const struct dpseci_congestion_notification_cfg *cfg);
+
+int dpseci_get_congestion_notification(struct fsl_mc_io *mc_io, u32 cmd_flags,
+	u16 token, struct dpseci_congestion_notification_cfg *cfg);
+
+#endif /* _DPSECI_H_ */