Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 583 insertions, 0 deletions

diff --git a/drivers/crypto/cavium/nitrox/nitrox_main.c b/drivers/crypto/cavium/nitrox/nitrox_main.c
new file mode 100644
index 000000000..432a61aca
--- /dev/null
+++ b/drivers/crypto/cavium/nitrox/nitrox_main.c
@@ -0,0 +1,583 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/aer.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+
+#include "nitrox_dev.h"
+#include "nitrox_common.h"
+#include "nitrox_csr.h"
+#include "nitrox_hal.h"
+#include "nitrox_isr.h"
+#include "nitrox_debugfs.h"
+
+#define CNN55XX_DEV_ID	0x12
+#define UCODE_HLEN 48
+#define DEFAULT_SE_GROUP 0
+#define DEFAULT_AE_GROUP 0
+
+#define DRIVER_VERSION "1.2"
+#define CNN55XX_UCD_BLOCK_SIZE 32768
+#define CNN55XX_MAX_UCODE_SIZE (CNN55XX_UCD_BLOCK_SIZE * 2)
+#define FW_DIR "cavium/"
+/* SE microcode */
+#define SE_FW	FW_DIR "cnn55xx_se.fw"
+/* AE microcode */
+#define AE_FW	FW_DIR "cnn55xx_ae.fw"
+
+static const char nitrox_driver_name[] = "CNN55XX";
+
+static LIST_HEAD(ndevlist);
+static DEFINE_MUTEX(devlist_lock);
+static unsigned int num_devices;
+
+/*
+ * nitrox_pci_tbl - PCI Device ID Table
+ */
+static const struct pci_device_id nitrox_pci_tbl[] = {
+	{PCI_VDEVICE(CAVIUM, CNN55XX_DEV_ID), 0},
+	/* required last entry */
+	{0, }
+};
+MODULE_DEVICE_TABLE(pci, nitrox_pci_tbl);
+
+static unsigned int qlen = DEFAULT_CMD_QLEN;
+module_param(qlen, uint, 0644);
+MODULE_PARM_DESC(qlen, "Command queue length - default 2048");
+
+/**
+ * struct ucode - Firmware Header
+ * @id: microcode ID
+ * @version: firmware version
+ * @code_size: code section size
+ * @raz: alignment
+ * @code: code section
+ */
+struct ucode {
+	u8 id;
+	char version[VERSION_LEN - 1];
+	__be32 code_size;
+	u8 raz[12];
+	u64 code[];
+};
+
+/*
+ * write_to_ucd_unit - Write Firmware to NITROX UCD unit
+ */
+static void write_to_ucd_unit(struct nitrox_device *ndev, u32 ucode_size,
+			      u64 *ucode_data, int block_num)
+{
+	u32 code_size;
+	u64 offset, data;
+	int i = 0;
+
+	/*
+	 * UCD structure
+	 *
+	 *  -------------
+	 *  |    BLK 7  |
+	 *  -------------
+	 *  |    BLK 6  |
+	 *  -------------
+	 *  |    ...    |
+	 *  -------------
+	 *  |    BLK 0  |
+	 *  -------------
+	 *  Total of 8 blocks, each size 32KB
+	 */
+
+	/* set the block number */
+	offset = UCD_UCODE_LOAD_BLOCK_NUM;
+	nitrox_write_csr(ndev, offset, block_num);
+
+	code_size = roundup(ucode_size, 16);
+	while (code_size) {
+		data = ucode_data[i];
+		/* write 8 bytes at a time */
+		offset = UCD_UCODE_LOAD_IDX_DATAX(i);
+		nitrox_write_csr(ndev, offset, data);
+		code_size -= 8;
+		i++;
+	}
+
+	usleep_range(300, 400);
+}
+
+static int nitrox_load_fw(struct nitrox_device *ndev)
+{
+	const struct firmware *fw;
+	const char *fw_name;
+	struct ucode *ucode;
+	u64 *ucode_data;
+	u64 offset;
+	union ucd_core_eid_ucode_block_num core_2_eid_val;
+	union aqm_grp_execmsk_lo aqm_grp_execmask_lo;
+	union aqm_grp_execmsk_hi aqm_grp_execmask_hi;
+	u32 ucode_size;
+	int ret, i = 0;
+
+	fw_name = SE_FW;
+	dev_info(DEV(ndev), "Loading firmware \"%s\"\n", fw_name);
+
+	ret = request_firmware(&fw, fw_name, DEV(ndev));
+	if (ret < 0) {
+		dev_err(DEV(ndev), "failed to get firmware %s\n", fw_name);
+		return ret;
+	}
+
+	ucode = (struct ucode *)fw->data;
+
+	ucode_size = be32_to_cpu(ucode->code_size) * 2;
+	if (!ucode_size || ucode_size > CNN55XX_MAX_UCODE_SIZE) {
+		dev_err(DEV(ndev), "Invalid ucode size: %u for firmware %s\n",
+			ucode_size, fw_name);
+		release_firmware(fw);
+		return -EINVAL;
+	}
+	ucode_data = ucode->code;
+
+	/* copy the firmware version */
+	memcpy(&ndev->hw.fw_name[0][0], ucode->version, (VERSION_LEN - 2));
+	ndev->hw.fw_name[0][VERSION_LEN - 1] = '\0';
+
+	/* Load SE Firmware on UCD Block 0 */
+	write_to_ucd_unit(ndev, ucode_size, ucode_data, 0);
+
+	release_firmware(fw);
+
+	/* put all SE cores in DEFAULT_SE_GROUP */
+	offset = POM_GRP_EXECMASKX(DEFAULT_SE_GROUP);
+	nitrox_write_csr(ndev, offset, (~0ULL));
+
+	/* write block number and firmware length
+	 * bit:<2:0> block number
+	 * bit:3 is set SE uses 32KB microcode
+	 * bit:3 is clear SE uses 64KB microcode
+	 */
+	core_2_eid_val.value = 0ULL;
+	core_2_eid_val.ucode_blk = 0;
+	if (ucode_size <= CNN55XX_UCD_BLOCK_SIZE)
+		core_2_eid_val.ucode_len = 1;
+	else
+		core_2_eid_val.ucode_len = 0;
+
+	for (i = 0; i < ndev->hw.se_cores; i++) {
+		offset = UCD_SE_EID_UCODE_BLOCK_NUMX(i);
+		nitrox_write_csr(ndev, offset, core_2_eid_val.value);
+	}
+
+
+	fw_name = AE_FW;
+	dev_info(DEV(ndev), "Loading firmware \"%s\"\n", fw_name);
+
+	ret = request_firmware(&fw, fw_name, DEV(ndev));
+	if (ret < 0) {
+		dev_err(DEV(ndev), "failed to get firmware %s\n", fw_name);
+		return ret;
+	}
+
+	ucode = (struct ucode *)fw->data;
+
+	ucode_size = be32_to_cpu(ucode->code_size) * 2;
+	if (!ucode_size || ucode_size > CNN55XX_MAX_UCODE_SIZE) {
+		dev_err(DEV(ndev), "Invalid ucode size: %u for firmware %s\n",
+			ucode_size, fw_name);
+		release_firmware(fw);
+		return -EINVAL;
+	}
+	ucode_data = ucode->code;
+
+	/* copy the firmware version */
+	memcpy(&ndev->hw.fw_name[1][0], ucode->version, (VERSION_LEN - 2));
+	ndev->hw.fw_name[1][VERSION_LEN - 1] = '\0';
+
+	/* Load AE Firmware on UCD Block 2 */
+	write_to_ucd_unit(ndev, ucode_size, ucode_data, 2);
+
+	release_firmware(fw);
+
+	/* put all AE cores in DEFAULT_AE_GROUP */
+	offset = AQM_GRP_EXECMSK_LOX(DEFAULT_AE_GROUP);
+	aqm_grp_execmask_lo.exec_0_to_39 = 0xFFFFFFFFFFULL;
+	nitrox_write_csr(ndev, offset, aqm_grp_execmask_lo.value);
+	offset = AQM_GRP_EXECMSK_HIX(DEFAULT_AE_GROUP);
+	aqm_grp_execmask_hi.exec_40_to_79 = 0xFFFFFFFFFFULL;
+	nitrox_write_csr(ndev, offset, aqm_grp_execmask_hi.value);
+
+	/* write block number and firmware length
+	 * bit:<2:0> block number
+	 * bit:3 is set AE uses 32KB microcode
+	 * bit:3 is clear AE uses 64KB microcode
+	 */
+	core_2_eid_val.value = 0ULL;
+	core_2_eid_val.ucode_blk = 2;
+	if (ucode_size <= CNN55XX_UCD_BLOCK_SIZE)
+		core_2_eid_val.ucode_len = 1;
+	else
+		core_2_eid_val.ucode_len = 0;
+
+	for (i = 0; i < ndev->hw.ae_cores; i++) {
+		offset = UCD_AE_EID_UCODE_BLOCK_NUMX(i);
+		nitrox_write_csr(ndev, offset, core_2_eid_val.value);
+	}
+
+	return 0;
+}
+
+/**
+ * nitrox_add_to_devlist - add NITROX device to global device list
+ * @ndev: NITROX device
+ */
+static int nitrox_add_to_devlist(struct nitrox_device *ndev)
+{
+	struct nitrox_device *dev;
+	int ret = 0;
+
+	INIT_LIST_HEAD(&ndev->list);
+	refcount_set(&ndev->refcnt, 1);
+
+	mutex_lock(&devlist_lock);
+	list_for_each_entry(dev, &ndevlist, list) {
+		if (dev == ndev) {
+			ret = -EEXIST;
+			goto unlock;
+		}
+	}
+	ndev->idx = num_devices++;
+	list_add_tail(&ndev->list, &ndevlist);
+unlock:
+	mutex_unlock(&devlist_lock);
+	return ret;
+}
+
+/**
+ * nitrox_remove_from_devlist - remove NITROX device from
+ *   global device list
+ * @ndev: NITROX device
+ */
+static void nitrox_remove_from_devlist(struct nitrox_device *ndev)
+{
+	mutex_lock(&devlist_lock);
+	list_del(&ndev->list);
+	num_devices--;
+	mutex_unlock(&devlist_lock);
+}
+
+struct nitrox_device *nitrox_get_first_device(void)
+{
+	struct nitrox_device *ndev = NULL, *iter;
+
+	mutex_lock(&devlist_lock);
+	list_for_each_entry(iter, &ndevlist, list) {
+		if (nitrox_ready(iter)) {
+			ndev = iter;
+			break;
+		}
+	}
+	mutex_unlock(&devlist_lock);
+	if (!ndev)
+		return NULL;
+
+	refcount_inc(&ndev->refcnt);
+	/* barrier to sync with other cpus */
+	smp_mb__after_atomic();
+	return ndev;
+}
+
+void nitrox_put_device(struct nitrox_device *ndev)
+{
+	if (!ndev)
+		return;
+
+	refcount_dec(&ndev->refcnt);
+	/* barrier to sync with other cpus */
+	smp_mb__after_atomic();
+}
+
+static int nitrox_device_flr(struct pci_dev *pdev)
+{
+	int pos = 0;
+
+	pos = pci_save_state(pdev);
+	if (pos) {
+		dev_err(&pdev->dev, "Failed to save pci state\n");
+		return -ENOMEM;
+	}
+
+	pcie_reset_flr(pdev, PCI_RESET_DO_RESET);
+
+	pci_restore_state(pdev);
+
+	return 0;
+}
+
+static int nitrox_pf_sw_init(struct nitrox_device *ndev)
+{
+	int err;
+
+	err = nitrox_common_sw_init(ndev);
+	if (err)
+		return err;
+
+	err = nitrox_register_interrupts(ndev);
+	if (err)
+		nitrox_common_sw_cleanup(ndev);
+
+	return err;
+}
+
+static void nitrox_pf_sw_cleanup(struct nitrox_device *ndev)
+{
+	nitrox_unregister_interrupts(ndev);
+	nitrox_common_sw_cleanup(ndev);
+}
+
+/**
+ * nitrox_bist_check - Check NITROX BIST registers status
+ * @ndev: NITROX device
+ */
+static int nitrox_bist_check(struct nitrox_device *ndev)
+{
+	u64 value = 0;
+	int i;
+
+	for (i = 0; i < NR_CLUSTERS; i++) {
+		value += nitrox_read_csr(ndev, EMU_BIST_STATUSX(i));
+		value += nitrox_read_csr(ndev, EFL_CORE_BIST_REGX(i));
+	}
+	value += nitrox_read_csr(ndev, UCD_BIST_STATUS);
+	value += nitrox_read_csr(ndev, NPS_CORE_BIST_REG);
+	value += nitrox_read_csr(ndev, NPS_CORE_NPC_BIST_REG);
+	value += nitrox_read_csr(ndev, NPS_PKT_SLC_BIST_REG);
+	value += nitrox_read_csr(ndev, NPS_PKT_IN_BIST_REG);
+	value += nitrox_read_csr(ndev, POM_BIST_REG);
+	value += nitrox_read_csr(ndev, BMI_BIST_REG);
+	value += nitrox_read_csr(ndev, EFL_TOP_BIST_STAT);
+	value += nitrox_read_csr(ndev, BMO_BIST_REG);
+	value += nitrox_read_csr(ndev, LBC_BIST_STATUS);
+	value += nitrox_read_csr(ndev, PEM_BIST_STATUSX(0));
+	if (value)
+		return -EIO;
+	return 0;
+}
+
+static int nitrox_pf_hw_init(struct nitrox_device *ndev)
+{
+	int err;
+
+	err = nitrox_bist_check(ndev);
+	if (err) {
+		dev_err(&ndev->pdev->dev, "BIST check failed\n");
+		return err;
+	}
+	/* get cores information */
+	nitrox_get_hwinfo(ndev);
+
+	nitrox_config_nps_core_unit(ndev);
+	nitrox_config_aqm_unit(ndev);
+	nitrox_config_nps_pkt_unit(ndev);
+	nitrox_config_pom_unit(ndev);
+	nitrox_config_efl_unit(ndev);
+	/* configure IO units */
+	nitrox_config_bmi_unit(ndev);
+	nitrox_config_bmo_unit(ndev);
+	/* configure Local Buffer Cache */
+	nitrox_config_lbc_unit(ndev);
+	nitrox_config_rand_unit(ndev);
+
+	/* load firmware on cores */
+	err = nitrox_load_fw(ndev);
+	if (err)
+		return err;
+
+	nitrox_config_emu_unit(ndev);
+
+	return 0;
+}
+
+/**
+ * nitrox_probe - NITROX Initialization function.
+ * @pdev: PCI device information struct
+ * @id: entry in nitrox_pci_tbl
+ *
+ * Return: 0, if the driver is bound to the device, or
+ *         a negative error if there is failure.
+ */
+static int nitrox_probe(struct pci_dev *pdev,
+			const struct pci_device_id *id)
+{
+	struct nitrox_device *ndev;
+	int err;
+
+	dev_info_once(&pdev->dev, "%s driver version %s\n",
+		      nitrox_driver_name, DRIVER_VERSION);
+
+	err = pci_enable_device_mem(pdev);
+	if (err)
+		return err;
+
+	/* do FLR */
+	err = nitrox_device_flr(pdev);
+	if (err) {
+		dev_err(&pdev->dev, "FLR failed\n");
+		goto flr_fail;
+	}
+
+	if (!dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64))) {
+		dev_dbg(&pdev->dev, "DMA to 64-BIT address\n");
+	} else {
+		err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+		if (err) {
+			dev_err(&pdev->dev, "DMA configuration failed\n");
+			goto flr_fail;
+		}
+	}
+
+	err = pci_request_mem_regions(pdev, nitrox_driver_name);
+	if (err)
+		goto flr_fail;
+	pci_set_master(pdev);
+
+	ndev = kzalloc(sizeof(*ndev), GFP_KERNEL);
+	if (!ndev) {
+		err = -ENOMEM;
+		goto ndev_fail;
+	}
+
+	pci_set_drvdata(pdev, ndev);
+	ndev->pdev = pdev;
+
+	/* add to device list */
+	nitrox_add_to_devlist(ndev);
+
+	ndev->hw.vendor_id = pdev->vendor;
+	ndev->hw.device_id = pdev->device;
+	ndev->hw.revision_id = pdev->revision;
+	/* command timeout in jiffies */
+	ndev->timeout = msecs_to_jiffies(CMD_TIMEOUT);
+	ndev->node = dev_to_node(&pdev->dev);
+	if (ndev->node == NUMA_NO_NODE)
+		ndev->node = 0;
+
+	ndev->bar_addr = ioremap(pci_resource_start(pdev, 0),
+				 pci_resource_len(pdev, 0));
+	if (!ndev->bar_addr) {
+		err = -EIO;
+		goto ioremap_err;
+	}
+	/* allocate command queus based on cpus, max queues are 64 */
+	ndev->nr_queues = min_t(u32, MAX_PF_QUEUES, num_online_cpus());
+	ndev->qlen = qlen;
+
+	err = nitrox_pf_sw_init(ndev);
+	if (err)
+		goto pf_sw_fail;
+
+	err = nitrox_pf_hw_init(ndev);
+	if (err)
+		goto pf_hw_fail;
+
+	nitrox_debugfs_init(ndev);
+
+	/* clear the statistics */
+	atomic64_set(&ndev->stats.posted, 0);
+	atomic64_set(&ndev->stats.completed, 0);
+	atomic64_set(&ndev->stats.dropped, 0);
+
+	atomic_set(&ndev->state, __NDEV_READY);
+	/* barrier to sync with other cpus */
+	smp_mb__after_atomic();
+
+	err = nitrox_crypto_register();
+	if (err)
+		goto crypto_fail;
+
+	return 0;
+
+crypto_fail:
+	nitrox_debugfs_exit(ndev);
+	atomic_set(&ndev->state, __NDEV_NOT_READY);
+	/* barrier to sync with other cpus */
+	smp_mb__after_atomic();
+pf_hw_fail:
+	nitrox_pf_sw_cleanup(ndev);
+pf_sw_fail:
+	iounmap(ndev->bar_addr);
+ioremap_err:
+	nitrox_remove_from_devlist(ndev);
+	kfree(ndev);
+	pci_set_drvdata(pdev, NULL);
+ndev_fail:
+	pci_release_mem_regions(pdev);
+flr_fail:
+	pci_disable_device(pdev);
+	return err;
+}
+
+/**
+ * nitrox_remove - Unbind the driver from the device.
+ * @pdev: PCI device information struct
+ */
+static void nitrox_remove(struct pci_dev *pdev)
+{
+	struct nitrox_device *ndev = pci_get_drvdata(pdev);
+
+	if (!ndev)
+		return;
+
+	if (!refcount_dec_and_test(&ndev->refcnt)) {
+		dev_err(DEV(ndev), "Device refcnt not zero (%d)\n",
+			refcount_read(&ndev->refcnt));
+		return;
+	}
+
+	dev_info(DEV(ndev), "Removing Device %x:%x\n",
+		 ndev->hw.vendor_id, ndev->hw.device_id);
+
+	atomic_set(&ndev->state, __NDEV_NOT_READY);
+	/* barrier to sync with other cpus */
+	smp_mb__after_atomic();
+
+	nitrox_remove_from_devlist(ndev);
+
+	/* disable SR-IOV */
+	nitrox_sriov_configure(pdev, 0);
+	nitrox_crypto_unregister();
+	nitrox_debugfs_exit(ndev);
+	nitrox_pf_sw_cleanup(ndev);
+
+	iounmap(ndev->bar_addr);
+	kfree(ndev);
+
+	pci_set_drvdata(pdev, NULL);
+	pci_release_mem_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static void nitrox_shutdown(struct pci_dev *pdev)
+{
+	pci_set_drvdata(pdev, NULL);
+	pci_release_mem_regions(pdev);
+	pci_disable_device(pdev);
+}
+
+static struct pci_driver nitrox_driver = {
+	.name = nitrox_driver_name,
+	.id_table = nitrox_pci_tbl,
+	.probe = nitrox_probe,
+	.remove	= nitrox_remove,
+	.shutdown = nitrox_shutdown,
+	.sriov_configure = nitrox_sriov_configure,
+};
+
+module_pci_driver(nitrox_driver);
+
+MODULE_AUTHOR("Srikanth Jampala <Jampala.Srikanth@cavium.com>");
+MODULE_DESCRIPTION("Cavium CNN55XX PF Driver" DRIVER_VERSION " ");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_FIRMWARE(SE_FW);