Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 797 insertions, 0 deletions

diff --git a/drivers/firmware/efi/libstub/efi-stub-helper.c b/drivers/firmware/efi/libstub/efi-stub-helper.c
new file mode 100644
index 000000000..3d9b2469a
--- /dev/null
+++ b/drivers/firmware/efi/libstub/efi-stub-helper.c
@@ -0,0 +1,797 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Helper functions used by the EFI stub on multiple
+ * architectures. This should be #included by the EFI stub
+ * implementation files.
+ *
+ * Copyright 2011 Intel Corporation; author Matt Fleming
+ */
+
+#include <linux/stdarg.h>
+
+#include <linux/ctype.h>
+#include <linux/efi.h>
+#include <linux/kernel.h>
+#include <linux/printk.h> /* For CONSOLE_LOGLEVEL_* */
+#include <asm/efi.h>
+#include <asm/setup.h>
+
+#include "efistub.h"
+
+bool efi_nochunk;
+bool efi_nokaslr = !IS_ENABLED(CONFIG_RANDOMIZE_BASE);
+int efi_loglevel = CONSOLE_LOGLEVEL_DEFAULT;
+bool efi_novamap;
+
+static bool efi_noinitrd;
+static bool efi_nosoftreserve;
+static bool efi_disable_pci_dma = IS_ENABLED(CONFIG_EFI_DISABLE_PCI_DMA);
+
+bool __pure __efi_soft_reserve_enabled(void)
+{
+	return !efi_nosoftreserve;
+}
+
+/**
+ * efi_char16_puts() - Write a UCS-2 encoded string to the console
+ * @str:	UCS-2 encoded string
+ */
+void efi_char16_puts(efi_char16_t *str)
+{
+	efi_call_proto(efi_table_attr(efi_system_table, con_out),
+		       output_string, str);
+}
+
+static
+u32 utf8_to_utf32(const u8 **s8)
+{
+	u32 c32;
+	u8 c0, cx;
+	size_t clen, i;
+
+	c0 = cx = *(*s8)++;
+	/*
+	 * The position of the most-significant 0 bit gives us the length of
+	 * a multi-octet encoding.
+	 */
+	for (clen = 0; cx & 0x80; ++clen)
+		cx <<= 1;
+	/*
+	 * If the 0 bit is in position 8, this is a valid single-octet
+	 * encoding. If the 0 bit is in position 7 or positions 1-3, the
+	 * encoding is invalid.
+	 * In either case, we just return the first octet.
+	 */
+	if (clen < 2 || clen > 4)
+		return c0;
+	/* Get the bits from the first octet. */
+	c32 = cx >> clen--;
+	for (i = 0; i < clen; ++i) {
+		/* Trailing octets must have 10 in most significant bits. */
+		cx = (*s8)[i] ^ 0x80;
+		if (cx & 0xc0)
+			return c0;
+		c32 = (c32 << 6) | cx;
+	}
+	/*
+	 * Check for validity:
+	 * - The character must be in the Unicode range.
+	 * - It must not be a surrogate.
+	 * - It must be encoded using the correct number of octets.
+	 */
+	if (c32 > 0x10ffff ||
+	    (c32 & 0xf800) == 0xd800 ||
+	    clen != (c32 >= 0x80) + (c32 >= 0x800) + (c32 >= 0x10000))
+		return c0;
+	*s8 += clen;
+	return c32;
+}
+
+/**
+ * efi_puts() - Write a UTF-8 encoded string to the console
+ * @str:	UTF-8 encoded string
+ */
+void efi_puts(const char *str)
+{
+	efi_char16_t buf[128];
+	size_t pos = 0, lim = ARRAY_SIZE(buf);
+	const u8 *s8 = (const u8 *)str;
+	u32 c32;
+
+	while (*s8) {
+		if (*s8 == '\n')
+			buf[pos++] = L'\r';
+		c32 = utf8_to_utf32(&s8);
+		if (c32 < 0x10000) {
+			/* Characters in plane 0 use a single word. */
+			buf[pos++] = c32;
+		} else {
+			/*
+			 * Characters in other planes encode into a surrogate
+			 * pair.
+			 */
+			buf[pos++] = (0xd800 - (0x10000 >> 10)) + (c32 >> 10);
+			buf[pos++] = 0xdc00 + (c32 & 0x3ff);
+		}
+		if (*s8 == '\0' || pos >= lim - 2) {
+			buf[pos] = L'\0';
+			efi_char16_puts(buf);
+			pos = 0;
+		}
+	}
+}
+
+/**
+ * efi_printk() - Print a kernel message
+ * @fmt:	format string
+ *
+ * The first letter of the format string is used to determine the logging level
+ * of the message. If the level is less then the current EFI logging level, the
+ * message is suppressed. The message will be truncated to 255 bytes.
+ *
+ * Return:	number of printed characters
+ */
+int efi_printk(const char *fmt, ...)
+{
+	char printf_buf[256];
+	va_list args;
+	int printed;
+	int loglevel = printk_get_level(fmt);
+
+	switch (loglevel) {
+	case '0' ... '9':
+		loglevel -= '0';
+		break;
+	default:
+		/*
+		 * Use loglevel -1 for cases where we just want to print to
+		 * the screen.
+		 */
+		loglevel = -1;
+		break;
+	}
+
+	if (loglevel >= efi_loglevel)
+		return 0;
+
+	if (loglevel >= 0)
+		efi_puts("EFI stub: ");
+
+	fmt = printk_skip_level(fmt);
+
+	va_start(args, fmt);
+	printed = vsnprintf(printf_buf, sizeof(printf_buf), fmt, args);
+	va_end(args);
+
+	efi_puts(printf_buf);
+	if (printed >= sizeof(printf_buf)) {
+		efi_puts("[Message truncated]\n");
+		return -1;
+	}
+
+	return printed;
+}
+
+/**
+ * efi_parse_options() - Parse EFI command line options
+ * @cmdline:	kernel command line
+ *
+ * Parse the ASCII string @cmdline for EFI options, denoted by the efi=
+ * option, e.g. efi=nochunk.
+ *
+ * It should be noted that efi= is parsed in two very different
+ * environments, first in the early boot environment of the EFI boot
+ * stub, and subsequently during the kernel boot.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_parse_options(char const *cmdline)
+{
+	size_t len;
+	efi_status_t status;
+	char *str, *buf;
+
+	if (!cmdline)
+		return EFI_SUCCESS;
+
+	len = strnlen(cmdline, COMMAND_LINE_SIZE - 1) + 1;
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, len, (void **)&buf);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	memcpy(buf, cmdline, len - 1);
+	buf[len - 1] = '\0';
+	str = skip_spaces(buf);
+
+	while (*str) {
+		char *param, *val;
+
+		str = next_arg(str, &param, &val);
+		if (!val && !strcmp(param, "--"))
+			break;
+
+		if (!strcmp(param, "nokaslr")) {
+			efi_nokaslr = true;
+		} else if (!strcmp(param, "quiet")) {
+			efi_loglevel = CONSOLE_LOGLEVEL_QUIET;
+		} else if (!strcmp(param, "noinitrd")) {
+			efi_noinitrd = true;
+		} else if (!strcmp(param, "efi") && val) {
+			efi_nochunk = parse_option_str(val, "nochunk");
+			efi_novamap |= parse_option_str(val, "novamap");
+
+			efi_nosoftreserve = IS_ENABLED(CONFIG_EFI_SOFT_RESERVE) &&
+					    parse_option_str(val, "nosoftreserve");
+
+			if (parse_option_str(val, "disable_early_pci_dma"))
+				efi_disable_pci_dma = true;
+			if (parse_option_str(val, "no_disable_early_pci_dma"))
+				efi_disable_pci_dma = false;
+			if (parse_option_str(val, "debug"))
+				efi_loglevel = CONSOLE_LOGLEVEL_DEBUG;
+		} else if (!strcmp(param, "video") &&
+			   val && strstarts(val, "efifb:")) {
+			efi_parse_option_graphics(val + strlen("efifb:"));
+		}
+	}
+	efi_bs_call(free_pool, buf);
+	return EFI_SUCCESS;
+}
+
+/*
+ * The EFI_LOAD_OPTION descriptor has the following layout:
+ *	u32 Attributes;
+ *	u16 FilePathListLength;
+ *	u16 Description[];
+ *	efi_device_path_protocol_t FilePathList[];
+ *	u8 OptionalData[];
+ *
+ * This function validates and unpacks the variable-size data fields.
+ */
+static
+bool efi_load_option_unpack(efi_load_option_unpacked_t *dest,
+			    const efi_load_option_t *src, size_t size)
+{
+	const void *pos;
+	u16 c;
+	efi_device_path_protocol_t header;
+	const efi_char16_t *description;
+	const efi_device_path_protocol_t *file_path_list;
+
+	if (size < offsetof(efi_load_option_t, variable_data))
+		return false;
+	pos = src->variable_data;
+	size -= offsetof(efi_load_option_t, variable_data);
+
+	if ((src->attributes & ~EFI_LOAD_OPTION_MASK) != 0)
+		return false;
+
+	/* Scan description. */
+	description = pos;
+	do {
+		if (size < sizeof(c))
+			return false;
+		c = *(const u16 *)pos;
+		pos += sizeof(c);
+		size -= sizeof(c);
+	} while (c != L'\0');
+
+	/* Scan file_path_list. */
+	file_path_list = pos;
+	do {
+		if (size < sizeof(header))
+			return false;
+		header = *(const efi_device_path_protocol_t *)pos;
+		if (header.length < sizeof(header))
+			return false;
+		if (size < header.length)
+			return false;
+		pos += header.length;
+		size -= header.length;
+	} while ((header.type != EFI_DEV_END_PATH && header.type != EFI_DEV_END_PATH2) ||
+		 (header.sub_type != EFI_DEV_END_ENTIRE));
+	if (pos != (const void *)file_path_list + src->file_path_list_length)
+		return false;
+
+	dest->attributes = src->attributes;
+	dest->file_path_list_length = src->file_path_list_length;
+	dest->description = description;
+	dest->file_path_list = file_path_list;
+	dest->optional_data_size = size;
+	dest->optional_data = size ? pos : NULL;
+
+	return true;
+}
+
+/*
+ * At least some versions of Dell firmware pass the entire contents of the
+ * Boot#### variable, i.e. the EFI_LOAD_OPTION descriptor, rather than just the
+ * OptionalData field.
+ *
+ * Detect this case and extract OptionalData.
+ */
+void efi_apply_loadoptions_quirk(const void **load_options, u32 *load_options_size)
+{
+	const efi_load_option_t *load_option = *load_options;
+	efi_load_option_unpacked_t load_option_unpacked;
+
+	if (!IS_ENABLED(CONFIG_X86))
+		return;
+	if (!load_option)
+		return;
+	if (*load_options_size < sizeof(*load_option))
+		return;
+	if ((load_option->attributes & ~EFI_LOAD_OPTION_BOOT_MASK) != 0)
+		return;
+
+	if (!efi_load_option_unpack(&load_option_unpacked, load_option, *load_options_size))
+		return;
+
+	efi_warn_once(FW_BUG "LoadOptions is an EFI_LOAD_OPTION descriptor\n");
+	efi_warn_once(FW_BUG "Using OptionalData as a workaround\n");
+
+	*load_options = load_option_unpacked.optional_data;
+	*load_options_size = load_option_unpacked.optional_data_size;
+}
+
+enum efistub_event {
+	EFISTUB_EVT_INITRD,
+	EFISTUB_EVT_LOAD_OPTIONS,
+	EFISTUB_EVT_COUNT,
+};
+
+#define STR_WITH_SIZE(s)	sizeof(s), s
+
+static const struct {
+	u32		pcr_index;
+	u32		event_id;
+	u32		event_data_len;
+	u8		event_data[52];
+} events[] = {
+	[EFISTUB_EVT_INITRD] = {
+		9,
+		INITRD_EVENT_TAG_ID,
+		STR_WITH_SIZE("Linux initrd")
+	},
+	[EFISTUB_EVT_LOAD_OPTIONS] = {
+		9,
+		LOAD_OPTIONS_EVENT_TAG_ID,
+		STR_WITH_SIZE("LOADED_IMAGE::LoadOptions")
+	},
+};
+
+static efi_status_t efi_measure_tagged_event(unsigned long load_addr,
+					     unsigned long load_size,
+					     enum efistub_event event)
+{
+	efi_guid_t tcg2_guid = EFI_TCG2_PROTOCOL_GUID;
+	efi_tcg2_protocol_t *tcg2 = NULL;
+	efi_status_t status;
+
+	efi_bs_call(locate_protocol, &tcg2_guid, NULL, (void **)&tcg2);
+	if (tcg2) {
+		struct efi_measured_event {
+			efi_tcg2_event_t	event_data;
+			efi_tcg2_tagged_event_t tagged_event;
+			u8			tagged_event_data[];
+		} *evt;
+		int size = sizeof(*evt) + events[event].event_data_len;
+
+		status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, size,
+				     (void **)&evt);
+		if (status != EFI_SUCCESS)
+			goto fail;
+
+		evt->event_data = (struct efi_tcg2_event){
+			.event_size			= size,
+			.event_header.header_size	= sizeof(evt->event_data.event_header),
+			.event_header.header_version	= EFI_TCG2_EVENT_HEADER_VERSION,
+			.event_header.pcr_index		= events[event].pcr_index,
+			.event_header.event_type	= EV_EVENT_TAG,
+		};
+
+		evt->tagged_event = (struct efi_tcg2_tagged_event){
+			.tagged_event_id		= events[event].event_id,
+			.tagged_event_data_size		= events[event].event_data_len,
+		};
+
+		memcpy(evt->tagged_event_data, events[event].event_data,
+		       events[event].event_data_len);
+
+		status = efi_call_proto(tcg2, hash_log_extend_event, 0,
+					load_addr, load_size, &evt->event_data);
+		efi_bs_call(free_pool, evt);
+
+		if (status != EFI_SUCCESS)
+			goto fail;
+		return EFI_SUCCESS;
+	}
+
+	return EFI_UNSUPPORTED;
+fail:
+	efi_warn("Failed to measure data for event %d: 0x%lx\n", event, status);
+	return status;
+}
+
+/*
+ * Convert the unicode UEFI command line to ASCII to pass to kernel.
+ * Size of memory allocated return in *cmd_line_len.
+ * Returns NULL on error.
+ */
+char *efi_convert_cmdline(efi_loaded_image_t *image, int *cmd_line_len)
+{
+	const efi_char16_t *options = efi_table_attr(image, load_options);
+	u32 options_size = efi_table_attr(image, load_options_size);
+	int options_bytes = 0, safe_options_bytes = 0;  /* UTF-8 bytes */
+	unsigned long cmdline_addr = 0;
+	const efi_char16_t *s2;
+	bool in_quote = false;
+	efi_status_t status;
+	u32 options_chars;
+
+	if (options_size > 0)
+		efi_measure_tagged_event((unsigned long)options, options_size,
+					 EFISTUB_EVT_LOAD_OPTIONS);
+
+	efi_apply_loadoptions_quirk((const void **)&options, &options_size);
+	options_chars = options_size / sizeof(efi_char16_t);
+
+	if (options) {
+		s2 = options;
+		while (options_bytes < COMMAND_LINE_SIZE && options_chars--) {
+			efi_char16_t c = *s2++;
+
+			if (c < 0x80) {
+				if (c == L'\0' || c == L'\n')
+					break;
+				if (c == L'"')
+					in_quote = !in_quote;
+				else if (!in_quote && isspace((char)c))
+					safe_options_bytes = options_bytes;
+
+				options_bytes++;
+				continue;
+			}
+
+			/*
+			 * Get the number of UTF-8 bytes corresponding to a
+			 * UTF-16 character.
+			 * The first part handles everything in the BMP.
+			 */
+			options_bytes += 2 + (c >= 0x800);
+			/*
+			 * Add one more byte for valid surrogate pairs. Invalid
+			 * surrogates will be replaced with 0xfffd and take up
+			 * only 3 bytes.
+			 */
+			if ((c & 0xfc00) == 0xd800) {
+				/*
+				 * If the very last word is a high surrogate,
+				 * we must ignore it since we can't access the
+				 * low surrogate.
+				 */
+				if (!options_chars) {
+					options_bytes -= 3;
+				} else if ((*s2 & 0xfc00) == 0xdc00) {
+					options_bytes++;
+					options_chars--;
+					s2++;
+				}
+			}
+		}
+		if (options_bytes >= COMMAND_LINE_SIZE) {
+			options_bytes = safe_options_bytes;
+			efi_err("Command line is too long: truncated to %d bytes\n",
+				options_bytes);
+		}
+	}
+
+	options_bytes++;	/* NUL termination */
+
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, options_bytes,
+			     (void **)&cmdline_addr);
+	if (status != EFI_SUCCESS)
+		return NULL;
+
+	snprintf((char *)cmdline_addr, options_bytes, "%.*ls",
+		 options_bytes - 1, options);
+
+	*cmd_line_len = options_bytes;
+	return (char *)cmdline_addr;
+}
+
+/**
+ * efi_exit_boot_services() - Exit boot services
+ * @handle:	handle of the exiting image
+ * @priv:	argument to be passed to @priv_func
+ * @priv_func:	function to process the memory map before exiting boot services
+ *
+ * Handle calling ExitBootServices according to the requirements set out by the
+ * spec.  Obtains the current memory map, and returns that info after calling
+ * ExitBootServices.  The client must specify a function to perform any
+ * processing of the memory map data prior to ExitBootServices.  A client
+ * specific structure may be passed to the function via priv.  The client
+ * function may be called multiple times.
+ *
+ * Return:	status code
+ */
+efi_status_t efi_exit_boot_services(void *handle, void *priv,
+				    efi_exit_boot_map_processing priv_func)
+{
+	struct efi_boot_memmap *map;
+	efi_status_t status;
+
+	if (efi_disable_pci_dma)
+		efi_pci_disable_bridge_busmaster();
+
+	status = efi_get_memory_map(&map, true);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	status = priv_func(map, priv);
+	if (status != EFI_SUCCESS) {
+		efi_bs_call(free_pool, map);
+		return status;
+	}
+
+	status = efi_bs_call(exit_boot_services, handle, map->map_key);
+
+	if (status == EFI_INVALID_PARAMETER) {
+		/*
+		 * The memory map changed between efi_get_memory_map() and
+		 * exit_boot_services().  Per the UEFI Spec v2.6, Section 6.4:
+		 * EFI_BOOT_SERVICES.ExitBootServices we need to get the
+		 * updated map, and try again.  The spec implies one retry
+		 * should be sufficent, which is confirmed against the EDK2
+		 * implementation.  Per the spec, we can only invoke
+		 * get_memory_map() and exit_boot_services() - we cannot alloc
+		 * so efi_get_memory_map() cannot be used, and we must reuse
+		 * the buffer.  For all practical purposes, the headroom in the
+		 * buffer should account for any changes in the map so the call
+		 * to get_memory_map() is expected to succeed here.
+		 */
+		map->map_size = map->buff_size;
+		status = efi_bs_call(get_memory_map,
+				     &map->map_size,
+				     &map->map,
+				     &map->map_key,
+				     &map->desc_size,
+				     &map->desc_ver);
+
+		/* exit_boot_services() was called, thus cannot free */
+		if (status != EFI_SUCCESS)
+			return status;
+
+		status = priv_func(map, priv);
+		/* exit_boot_services() was called, thus cannot free */
+		if (status != EFI_SUCCESS)
+			return status;
+
+		status = efi_bs_call(exit_boot_services, handle, map->map_key);
+	}
+
+	return status;
+}
+
+/**
+ * get_efi_config_table() - retrieve UEFI configuration table
+ * @guid:	GUID of the configuration table to be retrieved
+ * Return:	pointer to the configuration table or NULL
+ */
+void *get_efi_config_table(efi_guid_t guid)
+{
+	unsigned long tables = efi_table_attr(efi_system_table, tables);
+	int nr_tables = efi_table_attr(efi_system_table, nr_tables);
+	int i;
+
+	for (i = 0; i < nr_tables; i++) {
+		efi_config_table_t *t = (void *)tables;
+
+		if (efi_guidcmp(t->guid, guid) == 0)
+			return efi_table_attr(t, table);
+
+		tables += efi_is_native() ? sizeof(efi_config_table_t)
+					  : sizeof(efi_config_table_32_t);
+	}
+	return NULL;
+}
+
+/*
+ * The LINUX_EFI_INITRD_MEDIA_GUID vendor media device path below provides a way
+ * for the firmware or bootloader to expose the initrd data directly to the stub
+ * via the trivial LoadFile2 protocol, which is defined in the UEFI spec, and is
+ * very easy to implement. It is a simple Linux initrd specific conduit between
+ * kernel and firmware, allowing us to put the EFI stub (being part of the
+ * kernel) in charge of where and when to load the initrd, while leaving it up
+ * to the firmware to decide whether it needs to expose its filesystem hierarchy
+ * via EFI protocols.
+ */
+static const struct {
+	struct efi_vendor_dev_path	vendor;
+	struct efi_generic_dev_path	end;
+} __packed initrd_dev_path = {
+	{
+		{
+			EFI_DEV_MEDIA,
+			EFI_DEV_MEDIA_VENDOR,
+			sizeof(struct efi_vendor_dev_path),
+		},
+		LINUX_EFI_INITRD_MEDIA_GUID
+	}, {
+		EFI_DEV_END_PATH,
+		EFI_DEV_END_ENTIRE,
+		sizeof(struct efi_generic_dev_path)
+	}
+};
+
+/**
+ * efi_load_initrd_dev_path() - load the initrd from the Linux initrd device path
+ * @load_addr:	pointer to store the address where the initrd was loaded
+ * @load_size:	pointer to store the size of the loaded initrd
+ * @max:	upper limit for the initrd memory allocation
+ *
+ * Return:
+ * * %EFI_SUCCESS if the initrd was loaded successfully, in which
+ *   case @load_addr and @load_size are assigned accordingly
+ * * %EFI_NOT_FOUND if no LoadFile2 protocol exists on the initrd device path
+ * * %EFI_OUT_OF_RESOURCES if memory allocation failed
+ * * %EFI_LOAD_ERROR in all other cases
+ */
+static
+efi_status_t efi_load_initrd_dev_path(struct linux_efi_initrd *initrd,
+				      unsigned long max)
+{
+	efi_guid_t lf2_proto_guid = EFI_LOAD_FILE2_PROTOCOL_GUID;
+	efi_device_path_protocol_t *dp;
+	efi_load_file2_protocol_t *lf2;
+	efi_handle_t handle;
+	efi_status_t status;
+
+	dp = (efi_device_path_protocol_t *)&initrd_dev_path;
+	status = efi_bs_call(locate_device_path, &lf2_proto_guid, &dp, &handle);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	status = efi_bs_call(handle_protocol, handle, &lf2_proto_guid,
+			     (void **)&lf2);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	initrd->size = 0;
+	status = efi_call_proto(lf2, load_file, dp, false, &initrd->size, NULL);
+	if (status != EFI_BUFFER_TOO_SMALL)
+		return EFI_LOAD_ERROR;
+
+	status = efi_allocate_pages(initrd->size, &initrd->base, max);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	status = efi_call_proto(lf2, load_file, dp, false, &initrd->size,
+				(void *)initrd->base);
+	if (status != EFI_SUCCESS) {
+		efi_free(initrd->size, initrd->base);
+		return EFI_LOAD_ERROR;
+	}
+	return EFI_SUCCESS;
+}
+
+static
+efi_status_t efi_load_initrd_cmdline(efi_loaded_image_t *image,
+				     struct linux_efi_initrd *initrd,
+				     unsigned long soft_limit,
+				     unsigned long hard_limit)
+{
+	if (!IS_ENABLED(CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER) ||
+	    (IS_ENABLED(CONFIG_X86) && (!efi_is_native() || image == NULL)))
+		return EFI_UNSUPPORTED;
+
+	return handle_cmdline_files(image, L"initrd=", sizeof(L"initrd=") - 2,
+				    soft_limit, hard_limit,
+				    &initrd->base, &initrd->size);
+}
+
+/**
+ * efi_load_initrd() - Load initial RAM disk
+ * @image:	EFI loaded image protocol
+ * @soft_limit:	preferred address for loading the initrd
+ * @hard_limit:	upper limit address for loading the initrd
+ *
+ * Return:	status code
+ */
+efi_status_t efi_load_initrd(efi_loaded_image_t *image,
+			     unsigned long soft_limit,
+			     unsigned long hard_limit,
+			     const struct linux_efi_initrd **out)
+{
+	efi_guid_t tbl_guid = LINUX_EFI_INITRD_MEDIA_GUID;
+	efi_status_t status = EFI_SUCCESS;
+	struct linux_efi_initrd initrd, *tbl;
+
+	if (!IS_ENABLED(CONFIG_BLK_DEV_INITRD) || efi_noinitrd)
+		return EFI_SUCCESS;
+
+	status = efi_load_initrd_dev_path(&initrd, hard_limit);
+	if (status == EFI_SUCCESS) {
+		efi_info("Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path\n");
+		if (initrd.size > 0 &&
+		    efi_measure_tagged_event(initrd.base, initrd.size,
+					     EFISTUB_EVT_INITRD) == EFI_SUCCESS)
+			efi_info("Measured initrd data into PCR 9\n");
+	} else if (status == EFI_NOT_FOUND) {
+		status = efi_load_initrd_cmdline(image, &initrd, soft_limit,
+						 hard_limit);
+		/* command line loader disabled or no initrd= passed? */
+		if (status == EFI_UNSUPPORTED || status == EFI_NOT_READY)
+			return EFI_SUCCESS;
+		if (status == EFI_SUCCESS)
+			efi_info("Loaded initrd from command line option\n");
+	}
+	if (status != EFI_SUCCESS)
+		goto failed;
+
+	status = efi_bs_call(allocate_pool, EFI_LOADER_DATA, sizeof(initrd),
+			     (void **)&tbl);
+	if (status != EFI_SUCCESS)
+		goto free_initrd;
+
+	*tbl = initrd;
+	status = efi_bs_call(install_configuration_table, &tbl_guid, tbl);
+	if (status != EFI_SUCCESS)
+		goto free_tbl;
+
+	if (out)
+		*out = tbl;
+	return EFI_SUCCESS;
+
+free_tbl:
+	efi_bs_call(free_pool, tbl);
+free_initrd:
+	efi_free(initrd.size, initrd.base);
+failed:
+	efi_err("Failed to load initrd: 0x%lx\n", status);
+	return status;
+}
+
+/**
+ * efi_wait_for_key() - Wait for key stroke
+ * @usec:	number of microseconds to wait for key stroke
+ * @key:	key entered
+ *
+ * Wait for up to @usec microseconds for a key stroke.
+ *
+ * Return:	status code, EFI_SUCCESS if key received
+ */
+efi_status_t efi_wait_for_key(unsigned long usec, efi_input_key_t *key)
+{
+	efi_event_t events[2], timer;
+	unsigned long index;
+	efi_simple_text_input_protocol_t *con_in;
+	efi_status_t status;
+
+	con_in = efi_table_attr(efi_system_table, con_in);
+	if (!con_in)
+		return EFI_UNSUPPORTED;
+	efi_set_event_at(events, 0, efi_table_attr(con_in, wait_for_key));
+
+	status = efi_bs_call(create_event, EFI_EVT_TIMER, 0, NULL, NULL, &timer);
+	if (status != EFI_SUCCESS)
+		return status;
+
+	status = efi_bs_call(set_timer, timer, EfiTimerRelative,
+			     EFI_100NSEC_PER_USEC * usec);
+	if (status != EFI_SUCCESS)
+		return status;
+	efi_set_event_at(events, 1, timer);
+
+	status = efi_bs_call(wait_for_event, 2, events, &index);
+	if (status == EFI_SUCCESS) {
+		if (index == 0)
+			status = efi_call_proto(con_in, read_keystroke, key);
+		else
+			status = EFI_TIMEOUT;
+	}
+
+	efi_bs_call(close_event, timer);
+
+	return status;
+}