Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 318 insertions, 0 deletions

diff --git a/drivers/gpio/gpio-xlp.c b/drivers/gpio/gpio-xlp.c
new file mode 100644
index 000000000..0199f5453
--- /dev/null
+++ b/drivers/gpio/gpio-xlp.c
@@ -0,0 +1,318 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2003-2015 Broadcom Corporation
+ * All Rights Reserved
+ */
+
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/acpi.h>
+
+/*
+ * XLP GPIO has multiple 32 bit registers for each feature where each register
+ * controls 32 pins. So, pins up to 64 require 2 32-bit registers and up to 96
+ * require 3 32-bit registers for each feature.
+ * Here we only define offset of the first register for each feature. Offset of
+ * the registers for pins greater than 32 can be calculated as following(Use
+ * GPIO_INT_STAT as example):
+ *
+ * offset = (gpio / XLP_GPIO_REGSZ) * 4;
+ * reg_addr = addr + offset;
+ *
+ * where addr is base address of the that feature register and gpio is the pin.
+ */
+#define GPIO_9XX_BYTESWAP	0X00
+#define GPIO_9XX_CTRL		0X04
+#define GPIO_9XX_OUTPUT_EN	0x14
+#define GPIO_9XX_PADDRV		0x24
+/*
+ * Only for 4 interrupt enable reg are defined for now,
+ * total reg available are 12.
+ */
+#define GPIO_9XX_INT_EN00	0x44
+#define GPIO_9XX_INT_EN10	0x54
+#define GPIO_9XX_INT_EN20	0x64
+#define GPIO_9XX_INT_EN30	0x74
+#define GPIO_9XX_INT_POL	0x104
+#define GPIO_9XX_INT_TYPE	0x114
+#define GPIO_9XX_INT_STAT	0x124
+
+/* Interrupt type register mask */
+#define XLP_GPIO_IRQ_TYPE_LVL	0x0
+#define XLP_GPIO_IRQ_TYPE_EDGE	0x1
+
+/* Interrupt polarity register mask */
+#define XLP_GPIO_IRQ_POL_HIGH	0x0
+#define XLP_GPIO_IRQ_POL_LOW	0x1
+
+#define XLP_GPIO_REGSZ		32
+#define XLP_GPIO_IRQ_BASE	768
+#define XLP_MAX_NR_GPIO		96
+
+struct xlp_gpio_priv {
+	struct gpio_chip chip;
+	DECLARE_BITMAP(gpio_enabled_mask, XLP_MAX_NR_GPIO);
+	void __iomem *gpio_intr_en;	/* pointer to first intr enable reg */
+	void __iomem *gpio_intr_stat;	/* pointer to first intr status reg */
+	void __iomem *gpio_intr_type;	/* pointer to first intr type reg */
+	void __iomem *gpio_intr_pol;	/* pointer to first intr polarity reg */
+	void __iomem *gpio_out_en;	/* pointer to first output enable reg */
+	void __iomem *gpio_paddrv;	/* pointer to first pad drive reg */
+	spinlock_t lock;
+};
+
+static int xlp_gpio_get_reg(void __iomem *addr, unsigned gpio)
+{
+	u32 pos, regset;
+
+	pos = gpio % XLP_GPIO_REGSZ;
+	regset = (gpio / XLP_GPIO_REGSZ) * 4;
+	return !!(readl(addr + regset) & BIT(pos));
+}
+
+static void xlp_gpio_set_reg(void __iomem *addr, unsigned gpio, int state)
+{
+	u32 value, pos, regset;
+
+	pos = gpio % XLP_GPIO_REGSZ;
+	regset = (gpio / XLP_GPIO_REGSZ) * 4;
+	value = readl(addr + regset);
+
+	if (state)
+		value |= BIT(pos);
+	else
+		value &= ~BIT(pos);
+
+	writel(value, addr + regset);
+}
+
+static void xlp_gpio_irq_disable(struct irq_data *d)
+{
+	struct gpio_chip *gc  = irq_data_get_irq_chip_data(d);
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
+	__clear_bit(d->hwirq, priv->gpio_enabled_mask);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void xlp_gpio_irq_mask_ack(struct irq_data *d)
+{
+	struct gpio_chip *gc  = irq_data_get_irq_chip_data(d);
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x0);
+	xlp_gpio_set_reg(priv->gpio_intr_stat, d->hwirq, 0x1);
+	__clear_bit(d->hwirq, priv->gpio_enabled_mask);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void xlp_gpio_irq_unmask(struct irq_data *d)
+{
+	struct gpio_chip *gc  = irq_data_get_irq_chip_data(d);
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+	unsigned long flags;
+
+	spin_lock_irqsave(&priv->lock, flags);
+	xlp_gpio_set_reg(priv->gpio_intr_en, d->hwirq, 0x1);
+	__set_bit(d->hwirq, priv->gpio_enabled_mask);
+	spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int xlp_gpio_set_irq_type(struct irq_data *d, unsigned int type)
+{
+	struct gpio_chip *gc  = irq_data_get_irq_chip_data(d);
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+	int pol, irq_type;
+
+	switch (type) {
+	case IRQ_TYPE_EDGE_RISING:
+		irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
+		pol = XLP_GPIO_IRQ_POL_HIGH;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		irq_type = XLP_GPIO_IRQ_TYPE_EDGE;
+		pol = XLP_GPIO_IRQ_POL_LOW;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		irq_type = XLP_GPIO_IRQ_TYPE_LVL;
+		pol = XLP_GPIO_IRQ_POL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		irq_type = XLP_GPIO_IRQ_TYPE_LVL;
+		pol = XLP_GPIO_IRQ_POL_LOW;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	xlp_gpio_set_reg(priv->gpio_intr_type, d->hwirq, irq_type);
+	xlp_gpio_set_reg(priv->gpio_intr_pol, d->hwirq, pol);
+
+	return 0;
+}
+
+static struct irq_chip xlp_gpio_irq_chip = {
+	.name		= "XLP-GPIO",
+	.irq_mask_ack	= xlp_gpio_irq_mask_ack,
+	.irq_disable	= xlp_gpio_irq_disable,
+	.irq_set_type	= xlp_gpio_set_irq_type,
+	.irq_unmask	= xlp_gpio_irq_unmask,
+	.flags		= IRQCHIP_ONESHOT_SAFE,
+};
+
+static void xlp_gpio_generic_handler(struct irq_desc *desc)
+{
+	struct xlp_gpio_priv *priv = irq_desc_get_handler_data(desc);
+	struct irq_chip *irqchip = irq_desc_get_chip(desc);
+	int gpio, regoff;
+	u32 gpio_stat;
+
+	regoff = -1;
+	gpio_stat = 0;
+
+	chained_irq_enter(irqchip, desc);
+	for_each_set_bit(gpio, priv->gpio_enabled_mask, XLP_MAX_NR_GPIO) {
+		if (regoff != gpio / XLP_GPIO_REGSZ) {
+			regoff = gpio / XLP_GPIO_REGSZ;
+			gpio_stat = readl(priv->gpio_intr_stat + regoff * 4);
+		}
+
+		if (gpio_stat & BIT(gpio % XLP_GPIO_REGSZ))
+			generic_handle_domain_irq(priv->chip.irq.domain, gpio);
+	}
+	chained_irq_exit(irqchip, desc);
+}
+
+static int xlp_gpio_dir_output(struct gpio_chip *gc, unsigned gpio, int state)
+{
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+
+	BUG_ON(gpio >= gc->ngpio);
+	xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x1);
+
+	return 0;
+}
+
+static int xlp_gpio_dir_input(struct gpio_chip *gc, unsigned gpio)
+{
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+
+	BUG_ON(gpio >= gc->ngpio);
+	xlp_gpio_set_reg(priv->gpio_out_en, gpio, 0x0);
+
+	return 0;
+}
+
+static int xlp_gpio_get(struct gpio_chip *gc, unsigned gpio)
+{
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+
+	BUG_ON(gpio >= gc->ngpio);
+	return xlp_gpio_get_reg(priv->gpio_paddrv, gpio);
+}
+
+static void xlp_gpio_set(struct gpio_chip *gc, unsigned gpio, int state)
+{
+	struct xlp_gpio_priv *priv = gpiochip_get_data(gc);
+
+	BUG_ON(gpio >= gc->ngpio);
+	xlp_gpio_set_reg(priv->gpio_paddrv, gpio, state);
+}
+
+static int xlp_gpio_probe(struct platform_device *pdev)
+{
+	struct gpio_chip *gc;
+	struct gpio_irq_chip *girq;
+	struct xlp_gpio_priv *priv;
+	void __iomem *gpio_base;
+	int irq, err;
+
+	priv = devm_kzalloc(&pdev->dev,	sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	gpio_base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gpio_base))
+		return PTR_ERR(gpio_base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	priv->gpio_out_en = gpio_base + GPIO_9XX_OUTPUT_EN;
+	priv->gpio_paddrv = gpio_base + GPIO_9XX_PADDRV;
+	priv->gpio_intr_stat = gpio_base + GPIO_9XX_INT_STAT;
+	priv->gpio_intr_type = gpio_base + GPIO_9XX_INT_TYPE;
+	priv->gpio_intr_pol = gpio_base + GPIO_9XX_INT_POL;
+	priv->gpio_intr_en = gpio_base + GPIO_9XX_INT_EN00;
+
+	bitmap_zero(priv->gpio_enabled_mask, XLP_MAX_NR_GPIO);
+
+	gc = &priv->chip;
+
+	gc->owner = THIS_MODULE;
+	gc->label = dev_name(&pdev->dev);
+	gc->base = 0;
+	gc->parent = &pdev->dev;
+	gc->ngpio = 70;
+	gc->direction_output = xlp_gpio_dir_output;
+	gc->direction_input = xlp_gpio_dir_input;
+	gc->set = xlp_gpio_set;
+	gc->get = xlp_gpio_get;
+
+	spin_lock_init(&priv->lock);
+
+	girq = &gc->irq;
+	girq->chip = &xlp_gpio_irq_chip;
+	girq->parent_handler = xlp_gpio_generic_handler;
+	girq->num_parents = 1;
+	girq->parents = devm_kcalloc(&pdev->dev, 1,
+				     sizeof(*girq->parents),
+				     GFP_KERNEL);
+	if (!girq->parents)
+		return -ENOMEM;
+	girq->parents[0] = irq;
+	girq->first = 0;
+	girq->default_type = IRQ_TYPE_NONE;
+	girq->handler = handle_level_irq;
+
+	err = gpiochip_add_data(gc, priv);
+	if (err < 0)
+		return err;
+
+	dev_info(&pdev->dev, "registered %d GPIOs\n", gc->ngpio);
+
+	return 0;
+}
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id xlp_gpio_acpi_match[] = {
+	{ "BRCM9006" },
+	{ "CAV9006" },
+	{},
+};
+MODULE_DEVICE_TABLE(acpi, xlp_gpio_acpi_match);
+#endif
+
+static struct platform_driver xlp_gpio_driver = {
+	.driver		= {
+		.name	= "xlp-gpio",
+		.acpi_match_table = ACPI_PTR(xlp_gpio_acpi_match),
+	},
+	.probe		= xlp_gpio_probe,
+};
+module_platform_driver(xlp_gpio_driver);
+
+MODULE_AUTHOR("Kamlakant Patel <kamlakant.patel@broadcom.com>");
+MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@broadcom.com>");
+MODULE_DESCRIPTION("Netlogic XLP GPIO Driver");
+MODULE_LICENSE("GPL v2");