Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 505 insertions, 0 deletions

diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c
new file mode 100644
index 000000000..2531959d3
--- /dev/null
+++ b/drivers/gpu/drm/gma500/oaktrail_device.c
@@ -0,0 +1,505 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/**************************************************************************
+ * Copyright (c) 2011, Intel Corporation.
+ * All Rights Reserved.
+ *
+ **************************************************************************/
+
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/module.h>
+
+#include <drm/drm.h>
+
+#include "intel_bios.h"
+#include "mid_bios.h"
+#include "psb_drv.h"
+#include "psb_intel_reg.h"
+#include "psb_reg.h"
+
+static int oaktrail_output_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	if (dev_priv->iLVDS_enable)
+		oaktrail_lvds_init(dev, &dev_priv->mode_dev);
+	else
+		dev_err(dev->dev, "DSI is not supported\n");
+	if (dev_priv->hdmi_priv)
+		oaktrail_hdmi_init(dev, &dev_priv->mode_dev);
+
+	psb_intel_sdvo_init(dev, SDVOB);
+
+	return 0;
+}
+
+/*
+ *	Provide the low level interfaces for the Moorestown backlight
+ */
+
+#define MRST_BLC_MAX_PWM_REG_FREQ	    0xFFFF
+#define BLC_PWM_PRECISION_FACTOR 100	/* 10000000 */
+#define BLC_PWM_FREQ_CALC_CONSTANT 32
+#define MHz 1000000
+#define BLC_ADJUSTMENT_MAX 100
+
+static void oaktrail_set_brightness(struct drm_device *dev, int level)
+{
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	u32 blc_pwm_ctl;
+	u32 max_pwm_blc;
+
+	if (gma_power_begin(dev, 0)) {
+		/* Calculate and set the brightness value */
+		max_pwm_blc = REG_READ(BLC_PWM_CTL) >> 16;
+		blc_pwm_ctl = level * max_pwm_blc / 100;
+
+		/* Adjust the backlight level with the percent in
+		 * dev_priv->blc_adj1;
+		 */
+		blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj1;
+		blc_pwm_ctl = blc_pwm_ctl / 100;
+
+		/* Adjust the backlight level with the percent in
+		 * dev_priv->blc_adj2;
+		 */
+		blc_pwm_ctl = blc_pwm_ctl * dev_priv->blc_adj2;
+		blc_pwm_ctl = blc_pwm_ctl / 100;
+
+		/* force PWM bit on */
+		REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
+		REG_WRITE(BLC_PWM_CTL, (max_pwm_blc << 16) | blc_pwm_ctl);
+		gma_power_end(dev);
+	}
+}
+
+static int oaktrail_backlight_init(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	unsigned long core_clock;
+	u16 bl_max_freq;
+	uint32_t value;
+	uint32_t blc_pwm_precision_factor;
+
+	dev_priv->blc_adj1 = BLC_ADJUSTMENT_MAX;
+	dev_priv->blc_adj2 = BLC_ADJUSTMENT_MAX;
+	bl_max_freq = 256;
+	/* this needs to be set elsewhere */
+	blc_pwm_precision_factor = BLC_PWM_PRECISION_FACTOR;
+
+	core_clock = dev_priv->core_freq;
+
+	value = (core_clock * MHz) / BLC_PWM_FREQ_CALC_CONSTANT;
+	value *= blc_pwm_precision_factor;
+	value /= bl_max_freq;
+	value /= blc_pwm_precision_factor;
+
+	if (value > (unsigned long long)MRST_BLC_MAX_PWM_REG_FREQ)
+			return -ERANGE;
+
+	if (gma_power_begin(dev, false)) {
+		REG_WRITE(BLC_PWM_CTL2, (0x80000000 | REG_READ(BLC_PWM_CTL2)));
+		REG_WRITE(BLC_PWM_CTL, value | (value << 16));
+		gma_power_end(dev);
+	}
+
+	oaktrail_set_brightness(dev, PSB_MAX_BRIGHTNESS);
+	return 0;
+}
+
+/*
+ *	Provide the Moorestown specific chip logic and low level methods
+ *	for power management
+ */
+
+/**
+ *	oaktrail_save_display_registers	-	save registers lost on suspend
+ *	@dev: our DRM device
+ *
+ *	Save the state we need in order to be able to restore the interface
+ *	upon resume from suspend
+ */
+static int oaktrail_save_display_registers(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	struct psb_save_area *regs = &dev_priv->regs;
+	struct psb_pipe *p = &regs->pipe[0];
+	int i;
+	u32 pp_stat;
+
+	/* Display arbitration control + watermarks */
+	regs->psb.saveDSPARB = PSB_RVDC32(DSPARB);
+	regs->psb.saveDSPFW1 = PSB_RVDC32(DSPFW1);
+	regs->psb.saveDSPFW2 = PSB_RVDC32(DSPFW2);
+	regs->psb.saveDSPFW3 = PSB_RVDC32(DSPFW3);
+	regs->psb.saveDSPFW4 = PSB_RVDC32(DSPFW4);
+	regs->psb.saveDSPFW5 = PSB_RVDC32(DSPFW5);
+	regs->psb.saveDSPFW6 = PSB_RVDC32(DSPFW6);
+	regs->psb.saveCHICKENBIT = PSB_RVDC32(DSPCHICKENBIT);
+
+	/* Pipe & plane A info */
+	p->conf = PSB_RVDC32(PIPEACONF);
+	p->src = PSB_RVDC32(PIPEASRC);
+	p->fp0 = PSB_RVDC32(MRST_FPA0);
+	p->fp1 = PSB_RVDC32(MRST_FPA1);
+	p->dpll = PSB_RVDC32(MRST_DPLL_A);
+	p->htotal = PSB_RVDC32(HTOTAL_A);
+	p->hblank = PSB_RVDC32(HBLANK_A);
+	p->hsync = PSB_RVDC32(HSYNC_A);
+	p->vtotal = PSB_RVDC32(VTOTAL_A);
+	p->vblank = PSB_RVDC32(VBLANK_A);
+	p->vsync = PSB_RVDC32(VSYNC_A);
+	regs->psb.saveBCLRPAT_A = PSB_RVDC32(BCLRPAT_A);
+	p->cntr = PSB_RVDC32(DSPACNTR);
+	p->stride = PSB_RVDC32(DSPASTRIDE);
+	p->addr = PSB_RVDC32(DSPABASE);
+	p->surf = PSB_RVDC32(DSPASURF);
+	p->linoff = PSB_RVDC32(DSPALINOFF);
+	p->tileoff = PSB_RVDC32(DSPATILEOFF);
+
+	/* Save cursor regs */
+	regs->psb.saveDSPACURSOR_CTRL = PSB_RVDC32(CURACNTR);
+	regs->psb.saveDSPACURSOR_BASE = PSB_RVDC32(CURABASE);
+	regs->psb.saveDSPACURSOR_POS = PSB_RVDC32(CURAPOS);
+
+	/* Save palette (gamma) */
+	for (i = 0; i < 256; i++)
+		p->palette[i] = PSB_RVDC32(PALETTE_A + (i << 2));
+
+	if (dev_priv->hdmi_priv)
+		oaktrail_hdmi_save(dev);
+
+	/* Save performance state */
+	regs->psb.savePERF_MODE = PSB_RVDC32(MRST_PERF_MODE);
+
+	/* LVDS state */
+	regs->psb.savePP_CONTROL = PSB_RVDC32(PP_CONTROL);
+	regs->psb.savePFIT_PGM_RATIOS = PSB_RVDC32(PFIT_PGM_RATIOS);
+	regs->psb.savePFIT_AUTO_RATIOS = PSB_RVDC32(PFIT_AUTO_RATIOS);
+	regs->saveBLC_PWM_CTL = PSB_RVDC32(BLC_PWM_CTL);
+	regs->saveBLC_PWM_CTL2 = PSB_RVDC32(BLC_PWM_CTL2);
+	regs->psb.saveLVDS = PSB_RVDC32(LVDS);
+	regs->psb.savePFIT_CONTROL = PSB_RVDC32(PFIT_CONTROL);
+	regs->psb.savePP_ON_DELAYS = PSB_RVDC32(LVDSPP_ON);
+	regs->psb.savePP_OFF_DELAYS = PSB_RVDC32(LVDSPP_OFF);
+	regs->psb.savePP_DIVISOR = PSB_RVDC32(PP_CYCLE);
+
+	/* HW overlay */
+	regs->psb.saveOV_OVADD = PSB_RVDC32(OV_OVADD);
+	regs->psb.saveOV_OGAMC0 = PSB_RVDC32(OV_OGAMC0);
+	regs->psb.saveOV_OGAMC1 = PSB_RVDC32(OV_OGAMC1);
+	regs->psb.saveOV_OGAMC2 = PSB_RVDC32(OV_OGAMC2);
+	regs->psb.saveOV_OGAMC3 = PSB_RVDC32(OV_OGAMC3);
+	regs->psb.saveOV_OGAMC4 = PSB_RVDC32(OV_OGAMC4);
+	regs->psb.saveOV_OGAMC5 = PSB_RVDC32(OV_OGAMC5);
+
+	/* DPST registers */
+	regs->psb.saveHISTOGRAM_INT_CONTROL_REG =
+					PSB_RVDC32(HISTOGRAM_INT_CONTROL);
+	regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG =
+					PSB_RVDC32(HISTOGRAM_LOGIC_CONTROL);
+	regs->psb.savePWM_CONTROL_LOGIC = PSB_RVDC32(PWM_CONTROL_LOGIC);
+
+	if (dev_priv->iLVDS_enable) {
+		/* Shut down the panel */
+		PSB_WVDC32(0, PP_CONTROL);
+
+		do {
+			pp_stat = PSB_RVDC32(PP_STATUS);
+		} while (pp_stat & 0x80000000);
+
+		/* Turn off the plane */
+		PSB_WVDC32(0x58000000, DSPACNTR);
+		/* Trigger the plane disable */
+		PSB_WVDC32(0, DSPASURF);
+
+		/* Wait ~4 ticks */
+		msleep(4);
+
+		/* Turn off pipe */
+		PSB_WVDC32(0x0, PIPEACONF);
+		/* Wait ~8 ticks */
+		msleep(8);
+
+		/* Turn off PLLs */
+		PSB_WVDC32(0, MRST_DPLL_A);
+	}
+	return 0;
+}
+
+/**
+ *	oaktrail_restore_display_registers	-	restore lost register state
+ *	@dev: our DRM device
+ *
+ *	Restore register state that was lost during suspend and resume.
+ */
+static int oaktrail_restore_display_registers(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	struct psb_save_area *regs = &dev_priv->regs;
+	struct psb_pipe *p = &regs->pipe[0];
+	u32 pp_stat;
+	int i;
+
+	/* Display arbitration + watermarks */
+	PSB_WVDC32(regs->psb.saveDSPARB, DSPARB);
+	PSB_WVDC32(regs->psb.saveDSPFW1, DSPFW1);
+	PSB_WVDC32(regs->psb.saveDSPFW2, DSPFW2);
+	PSB_WVDC32(regs->psb.saveDSPFW3, DSPFW3);
+	PSB_WVDC32(regs->psb.saveDSPFW4, DSPFW4);
+	PSB_WVDC32(regs->psb.saveDSPFW5, DSPFW5);
+	PSB_WVDC32(regs->psb.saveDSPFW6, DSPFW6);
+	PSB_WVDC32(regs->psb.saveCHICKENBIT, DSPCHICKENBIT);
+
+	/* Make sure VGA plane is off. it initializes to on after reset!*/
+	PSB_WVDC32(0x80000000, VGACNTRL);
+
+	/* set the plls */
+	PSB_WVDC32(p->fp0, MRST_FPA0);
+	PSB_WVDC32(p->fp1, MRST_FPA1);
+
+	/* Actually enable it */
+	PSB_WVDC32(p->dpll, MRST_DPLL_A);
+	udelay(150);
+
+	/* Restore mode */
+	PSB_WVDC32(p->htotal, HTOTAL_A);
+	PSB_WVDC32(p->hblank, HBLANK_A);
+	PSB_WVDC32(p->hsync, HSYNC_A);
+	PSB_WVDC32(p->vtotal, VTOTAL_A);
+	PSB_WVDC32(p->vblank, VBLANK_A);
+	PSB_WVDC32(p->vsync, VSYNC_A);
+	PSB_WVDC32(p->src, PIPEASRC);
+	PSB_WVDC32(regs->psb.saveBCLRPAT_A, BCLRPAT_A);
+
+	/* Restore performance mode*/
+	PSB_WVDC32(regs->psb.savePERF_MODE, MRST_PERF_MODE);
+
+	/* Enable the pipe*/
+	if (dev_priv->iLVDS_enable)
+		PSB_WVDC32(p->conf, PIPEACONF);
+
+	/* Set up the plane*/
+	PSB_WVDC32(p->linoff, DSPALINOFF);
+	PSB_WVDC32(p->stride, DSPASTRIDE);
+	PSB_WVDC32(p->tileoff, DSPATILEOFF);
+
+	/* Enable the plane */
+	PSB_WVDC32(p->cntr, DSPACNTR);
+	PSB_WVDC32(p->surf, DSPASURF);
+
+	/* Enable Cursor A */
+	PSB_WVDC32(regs->psb.saveDSPACURSOR_CTRL, CURACNTR);
+	PSB_WVDC32(regs->psb.saveDSPACURSOR_POS, CURAPOS);
+	PSB_WVDC32(regs->psb.saveDSPACURSOR_BASE, CURABASE);
+
+	/* Restore palette (gamma) */
+	for (i = 0; i < 256; i++)
+		PSB_WVDC32(p->palette[i], PALETTE_A + (i << 2));
+
+	if (dev_priv->hdmi_priv)
+		oaktrail_hdmi_restore(dev);
+
+	if (dev_priv->iLVDS_enable) {
+		PSB_WVDC32(regs->saveBLC_PWM_CTL2, BLC_PWM_CTL2);
+		PSB_WVDC32(regs->psb.saveLVDS, LVDS); /*port 61180h*/
+		PSB_WVDC32(regs->psb.savePFIT_CONTROL, PFIT_CONTROL);
+		PSB_WVDC32(regs->psb.savePFIT_PGM_RATIOS, PFIT_PGM_RATIOS);
+		PSB_WVDC32(regs->psb.savePFIT_AUTO_RATIOS, PFIT_AUTO_RATIOS);
+		PSB_WVDC32(regs->saveBLC_PWM_CTL, BLC_PWM_CTL);
+		PSB_WVDC32(regs->psb.savePP_ON_DELAYS, LVDSPP_ON);
+		PSB_WVDC32(regs->psb.savePP_OFF_DELAYS, LVDSPP_OFF);
+		PSB_WVDC32(regs->psb.savePP_DIVISOR, PP_CYCLE);
+		PSB_WVDC32(regs->psb.savePP_CONTROL, PP_CONTROL);
+	}
+
+	/* Wait for cycle delay */
+	do {
+		pp_stat = PSB_RVDC32(PP_STATUS);
+	} while (pp_stat & 0x08000000);
+
+	/* Wait for panel power up */
+	do {
+		pp_stat = PSB_RVDC32(PP_STATUS);
+	} while (pp_stat & 0x10000000);
+
+	/* Restore HW overlay */
+	PSB_WVDC32(regs->psb.saveOV_OVADD, OV_OVADD);
+	PSB_WVDC32(regs->psb.saveOV_OGAMC0, OV_OGAMC0);
+	PSB_WVDC32(regs->psb.saveOV_OGAMC1, OV_OGAMC1);
+	PSB_WVDC32(regs->psb.saveOV_OGAMC2, OV_OGAMC2);
+	PSB_WVDC32(regs->psb.saveOV_OGAMC3, OV_OGAMC3);
+	PSB_WVDC32(regs->psb.saveOV_OGAMC4, OV_OGAMC4);
+	PSB_WVDC32(regs->psb.saveOV_OGAMC5, OV_OGAMC5);
+
+	/* DPST registers */
+	PSB_WVDC32(regs->psb.saveHISTOGRAM_INT_CONTROL_REG,
+						HISTOGRAM_INT_CONTROL);
+	PSB_WVDC32(regs->psb.saveHISTOGRAM_LOGIC_CONTROL_REG,
+						HISTOGRAM_LOGIC_CONTROL);
+	PSB_WVDC32(regs->psb.savePWM_CONTROL_LOGIC, PWM_CONTROL_LOGIC);
+
+	return 0;
+}
+
+/**
+ *	oaktrail_power_down	-	power down the display island
+ *	@dev: our DRM device
+ *
+ *	Power down the display interface of our device
+ */
+static int oaktrail_power_down(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	u32 pwr_mask ;
+	u32 pwr_sts;
+
+	pwr_mask = PSB_PWRGT_DISPLAY_MASK;
+	outl(pwr_mask, dev_priv->ospm_base + PSB_PM_SSC);
+
+	while (true) {
+		pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+		if ((pwr_sts & pwr_mask) == pwr_mask)
+			break;
+		else
+			udelay(10);
+	}
+	return 0;
+}
+
+/*
+ * oaktrail_power_up
+ *
+ * Restore power to the specified island(s) (powergating)
+ */
+static int oaktrail_power_up(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	u32 pwr_mask = PSB_PWRGT_DISPLAY_MASK;
+	u32 pwr_sts, pwr_cnt;
+
+	pwr_cnt = inl(dev_priv->ospm_base + PSB_PM_SSC);
+	pwr_cnt &= ~pwr_mask;
+	outl(pwr_cnt, (dev_priv->ospm_base + PSB_PM_SSC));
+
+	while (true) {
+		pwr_sts = inl(dev_priv->ospm_base + PSB_PM_SSS);
+		if ((pwr_sts & pwr_mask) == 0)
+			break;
+		else
+			udelay(10);
+	}
+	return 0;
+}
+
+/* Oaktrail */
+static const struct psb_offset oaktrail_regmap[2] = {
+	{
+		.fp0 = MRST_FPA0,
+		.fp1 = MRST_FPA1,
+		.cntr = DSPACNTR,
+		.conf = PIPEACONF,
+		.src = PIPEASRC,
+		.dpll = MRST_DPLL_A,
+		.htotal = HTOTAL_A,
+		.hblank = HBLANK_A,
+		.hsync = HSYNC_A,
+		.vtotal = VTOTAL_A,
+		.vblank = VBLANK_A,
+		.vsync = VSYNC_A,
+		.stride = DSPASTRIDE,
+		.size = DSPASIZE,
+		.pos = DSPAPOS,
+		.surf = DSPASURF,
+		.addr = MRST_DSPABASE,
+		.base = MRST_DSPABASE,
+		.status = PIPEASTAT,
+		.linoff = DSPALINOFF,
+		.tileoff = DSPATILEOFF,
+		.palette = PALETTE_A,
+	},
+	{
+		.fp0 = FPB0,
+		.fp1 = FPB1,
+		.cntr = DSPBCNTR,
+		.conf = PIPEBCONF,
+		.src = PIPEBSRC,
+		.dpll = DPLL_B,
+		.htotal = HTOTAL_B,
+		.hblank = HBLANK_B,
+		.hsync = HSYNC_B,
+		.vtotal = VTOTAL_B,
+		.vblank = VBLANK_B,
+		.vsync = VSYNC_B,
+		.stride = DSPBSTRIDE,
+		.size = DSPBSIZE,
+		.pos = DSPBPOS,
+		.surf = DSPBSURF,
+		.addr = DSPBBASE,
+		.base = DSPBBASE,
+		.status = PIPEBSTAT,
+		.linoff = DSPBLINOFF,
+		.tileoff = DSPBTILEOFF,
+		.palette = PALETTE_B,
+	},
+};
+
+static int oaktrail_chip_setup(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+	int ret;
+
+	dev_priv->use_msi = true;
+	dev_priv->regmap = oaktrail_regmap;
+
+	ret = mid_chip_setup(dev);
+	if (ret < 0)
+		return ret;
+	if (!dev_priv->has_gct) {
+		/* Now pull the BIOS data */
+		psb_intel_opregion_init(dev);
+		psb_intel_init_bios(dev);
+	}
+	gma_intel_setup_gmbus(dev);
+	oaktrail_hdmi_setup(dev);
+	return 0;
+}
+
+static void oaktrail_teardown(struct drm_device *dev)
+{
+	struct drm_psb_private *dev_priv = to_drm_psb_private(dev);
+
+	gma_intel_teardown_gmbus(dev);
+	oaktrail_hdmi_teardown(dev);
+	if (!dev_priv->has_gct)
+		psb_intel_destroy_bios(dev);
+}
+
+const struct psb_ops oaktrail_chip_ops = {
+	.name = "Oaktrail",
+	.pipes = 2,
+	.crtcs = 2,
+	.hdmi_mask = (1 << 1),
+	.lvds_mask = (1 << 0),
+	.sdvo_mask = (1 << 1),
+	.cursor_needs_phys = 0,
+	.sgx_offset = MRST_SGX_OFFSET,
+
+	.chip_setup = oaktrail_chip_setup,
+	.chip_teardown = oaktrail_teardown,
+	.crtc_helper = &oaktrail_helper_funcs,
+
+	.output_init = oaktrail_output_init,
+
+	.backlight_init = oaktrail_backlight_init,
+	.backlight_set = oaktrail_set_brightness,
+	.backlight_name = "oaktrail-bl",
+
+	.save_regs = oaktrail_save_display_registers,
+	.restore_regs = oaktrail_restore_display_registers,
+	.save_crtc = gma_crtc_save,
+	.restore_crtc = gma_crtc_restore,
+	.power_down = oaktrail_power_down,
+	.power_up = oaktrail_power_up,
+
+	.i2c_bus = 1,
+};