Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 585 insertions, 0 deletions

diff --git a/drivers/gpu/drm/i915/gvt/edid.c b/drivers/gpu/drm/i915/gvt/edid.c
new file mode 100644
index 000000000..1b509c1a1
--- /dev/null
+++ b/drivers/gpu/drm/i915/gvt/edid.c
@@ -0,0 +1,585 @@
+/*
+ * Copyright(c) 2011-2016 Intel Corporation. All rights reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ *
+ * Authors:
+ *    Ke Yu
+ *    Zhiyuan Lv <zhiyuan.lv@intel.com>
+ *
+ * Contributors:
+ *    Terrence Xu <terrence.xu@intel.com>
+ *    Changbin Du <changbin.du@intel.com>
+ *    Bing Niu <bing.niu@intel.com>
+ *    Zhi Wang <zhi.a.wang@intel.com>
+ *
+ */
+
+#include "display/intel_gmbus_regs.h"
+#include "gvt.h"
+#include "i915_drv.h"
+#include "i915_reg.h"
+
+#define GMBUS1_TOTAL_BYTES_SHIFT 16
+#define GMBUS1_TOTAL_BYTES_MASK 0x1ff
+#define gmbus1_total_byte_count(v) (((v) >> \
+	GMBUS1_TOTAL_BYTES_SHIFT) & GMBUS1_TOTAL_BYTES_MASK)
+#define gmbus1_slave_addr(v) (((v) & 0xff) >> 1)
+#define gmbus1_slave_index(v) (((v) >> 8) & 0xff)
+#define gmbus1_bus_cycle(v) (((v) >> 25) & 0x7)
+
+/* GMBUS0 bits definitions */
+#define _GMBUS_PIN_SEL_MASK     (0x7)
+
+static unsigned char edid_get_byte(struct intel_vgpu *vgpu)
+{
+	struct intel_vgpu_i2c_edid *edid = &vgpu->display.i2c_edid;
+	unsigned char chr = 0;
+
+	if (edid->state == I2C_NOT_SPECIFIED || !edid->slave_selected) {
+		gvt_vgpu_err("Driver tries to read EDID without proper sequence!\n");
+		return 0;
+	}
+	if (edid->current_edid_read >= EDID_SIZE) {
+		gvt_vgpu_err("edid_get_byte() exceeds the size of EDID!\n");
+		return 0;
+	}
+
+	if (!edid->edid_available) {
+		gvt_vgpu_err("Reading EDID but EDID is not available!\n");
+		return 0;
+	}
+
+	if (intel_vgpu_has_monitor_on_port(vgpu, edid->port)) {
+		struct intel_vgpu_edid_data *edid_data =
+			intel_vgpu_port(vgpu, edid->port)->edid;
+
+		chr = edid_data->edid_block[edid->current_edid_read];
+		edid->current_edid_read++;
+	} else {
+		gvt_vgpu_err("No EDID available during the reading?\n");
+	}
+	return chr;
+}
+
+static inline int cnp_get_port_from_gmbus0(u32 gmbus0)
+{
+	int port_select = gmbus0 & _GMBUS_PIN_SEL_MASK;
+	int port = -EINVAL;
+
+	if (port_select == GMBUS_PIN_1_BXT)
+		port = PORT_B;
+	else if (port_select == GMBUS_PIN_2_BXT)
+		port = PORT_C;
+	else if (port_select == GMBUS_PIN_3_BXT)
+		port = PORT_D;
+	else if (port_select == GMBUS_PIN_4_CNP)
+		port = PORT_E;
+	return port;
+}
+
+static inline int bxt_get_port_from_gmbus0(u32 gmbus0)
+{
+	int port_select = gmbus0 & _GMBUS_PIN_SEL_MASK;
+	int port = -EINVAL;
+
+	if (port_select == GMBUS_PIN_1_BXT)
+		port = PORT_B;
+	else if (port_select == GMBUS_PIN_2_BXT)
+		port = PORT_C;
+	else if (port_select == GMBUS_PIN_3_BXT)
+		port = PORT_D;
+	return port;
+}
+
+static inline int get_port_from_gmbus0(u32 gmbus0)
+{
+	int port_select = gmbus0 & _GMBUS_PIN_SEL_MASK;
+	int port = -EINVAL;
+
+	if (port_select == GMBUS_PIN_VGADDC)
+		port = PORT_E;
+	else if (port_select == GMBUS_PIN_DPC)
+		port = PORT_C;
+	else if (port_select == GMBUS_PIN_DPB)
+		port = PORT_B;
+	else if (port_select == GMBUS_PIN_DPD)
+		port = PORT_D;
+	return port;
+}
+
+static void reset_gmbus_controller(struct intel_vgpu *vgpu)
+{
+	vgpu_vreg_t(vgpu, PCH_GMBUS2) = GMBUS_HW_RDY;
+	if (!vgpu->display.i2c_edid.edid_available)
+		vgpu_vreg_t(vgpu, PCH_GMBUS2) |= GMBUS_SATOER;
+	vgpu->display.i2c_edid.gmbus.phase = GMBUS_IDLE_PHASE;
+}
+
+/* GMBUS0 */
+static int gmbus0_mmio_write(struct intel_vgpu *vgpu,
+			unsigned int offset, void *p_data, unsigned int bytes)
+{
+	struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
+	int port, pin_select;
+
+	memcpy(&vgpu_vreg(vgpu, offset), p_data, bytes);
+
+	pin_select = vgpu_vreg(vgpu, offset) & _GMBUS_PIN_SEL_MASK;
+
+	intel_vgpu_init_i2c_edid(vgpu);
+
+	if (pin_select == 0)
+		return 0;
+
+	if (IS_BROXTON(i915))
+		port = bxt_get_port_from_gmbus0(pin_select);
+	else if (IS_COFFEELAKE(i915) || IS_COMETLAKE(i915))
+		port = cnp_get_port_from_gmbus0(pin_select);
+	else
+		port = get_port_from_gmbus0(pin_select);
+	if (drm_WARN_ON(&i915->drm, port < 0))
+		return 0;
+
+	vgpu->display.i2c_edid.state = I2C_GMBUS;
+	vgpu->display.i2c_edid.gmbus.phase = GMBUS_IDLE_PHASE;
+
+	vgpu_vreg_t(vgpu, PCH_GMBUS2) &= ~GMBUS_ACTIVE;
+	vgpu_vreg_t(vgpu, PCH_GMBUS2) |= GMBUS_HW_RDY | GMBUS_HW_WAIT_PHASE;
+
+	if (intel_vgpu_has_monitor_on_port(vgpu, port) &&
+			!intel_vgpu_port_is_dp(vgpu, port)) {
+		vgpu->display.i2c_edid.port = port;
+		vgpu->display.i2c_edid.edid_available = true;
+		vgpu_vreg_t(vgpu, PCH_GMBUS2) &= ~GMBUS_SATOER;
+	} else
+		vgpu_vreg_t(vgpu, PCH_GMBUS2) |= GMBUS_SATOER;
+	return 0;
+}
+
+static int gmbus1_mmio_write(struct intel_vgpu *vgpu, unsigned int offset,
+		void *p_data, unsigned int bytes)
+{
+	struct intel_vgpu_i2c_edid *i2c_edid = &vgpu->display.i2c_edid;
+	u32 slave_addr;
+	u32 wvalue = *(u32 *)p_data;
+
+	if (vgpu_vreg(vgpu, offset) & GMBUS_SW_CLR_INT) {
+		if (!(wvalue & GMBUS_SW_CLR_INT)) {
+			vgpu_vreg(vgpu, offset) &= ~GMBUS_SW_CLR_INT;
+			reset_gmbus_controller(vgpu);
+		}
+		/*
+		 * TODO: "This bit is cleared to zero when an event
+		 * causes the HW_RDY bit transition to occur "
+		 */
+	} else {
+		/*
+		 * per bspec setting this bit can cause:
+		 * 1) INT status bit cleared
+		 * 2) HW_RDY bit asserted
+		 */
+		if (wvalue & GMBUS_SW_CLR_INT) {
+			vgpu_vreg_t(vgpu, PCH_GMBUS2) &= ~GMBUS_INT;
+			vgpu_vreg_t(vgpu, PCH_GMBUS2) |= GMBUS_HW_RDY;
+		}
+
+		/* For virtualization, we suppose that HW is always ready,
+		 * so GMBUS_SW_RDY should always be cleared
+		 */
+		if (wvalue & GMBUS_SW_RDY)
+			wvalue &= ~GMBUS_SW_RDY;
+
+		i2c_edid->gmbus.total_byte_count =
+			gmbus1_total_byte_count(wvalue);
+		slave_addr = gmbus1_slave_addr(wvalue);
+
+		/* vgpu gmbus only support EDID */
+		if (slave_addr == EDID_ADDR) {
+			i2c_edid->slave_selected = true;
+		} else if (slave_addr != 0) {
+			gvt_dbg_dpy(
+				"vgpu%d: unsupported gmbus slave addr(0x%x)\n"
+				"	gmbus operations will be ignored.\n",
+					vgpu->id, slave_addr);
+		}
+
+		if (wvalue & GMBUS_CYCLE_INDEX)
+			i2c_edid->current_edid_read =
+				gmbus1_slave_index(wvalue);
+
+		i2c_edid->gmbus.cycle_type = gmbus1_bus_cycle(wvalue);
+		switch (gmbus1_bus_cycle(wvalue)) {
+		case GMBUS_NOCYCLE:
+			break;
+		case GMBUS_STOP:
+			/* From spec:
+			 * This can only cause a STOP to be generated
+			 * if a GMBUS cycle is generated, the GMBUS is
+			 * currently in a data/wait/idle phase, or it is in a
+			 * WAIT phase
+			 */
+			if (gmbus1_bus_cycle(vgpu_vreg(vgpu, offset))
+				!= GMBUS_NOCYCLE) {
+				intel_vgpu_init_i2c_edid(vgpu);
+				/* After the 'stop' cycle, hw state would become
+				 * 'stop phase' and then 'idle phase' after a
+				 * few milliseconds. In emulation, we just set
+				 * it as 'idle phase' ('stop phase' is not
+				 * visible in gmbus interface)
+				 */
+				i2c_edid->gmbus.phase = GMBUS_IDLE_PHASE;
+				vgpu_vreg_t(vgpu, PCH_GMBUS2) &= ~GMBUS_ACTIVE;
+			}
+			break;
+		case NIDX_NS_W:
+		case IDX_NS_W:
+		case NIDX_STOP:
+		case IDX_STOP:
+			/* From hw spec the GMBUS phase
+			 * transition like this:
+			 * START (-->INDEX) -->DATA
+			 */
+			i2c_edid->gmbus.phase = GMBUS_DATA_PHASE;
+			vgpu_vreg_t(vgpu, PCH_GMBUS2) |= GMBUS_ACTIVE;
+			break;
+		default:
+			gvt_vgpu_err("Unknown/reserved GMBUS cycle detected!\n");
+			break;
+		}
+		/*
+		 * From hw spec the WAIT state will be
+		 * cleared:
+		 * (1) in a new GMBUS cycle
+		 * (2) by generating a stop
+		 */
+		vgpu_vreg(vgpu, offset) = wvalue;
+	}
+	return 0;
+}
+
+static int gmbus3_mmio_write(struct intel_vgpu *vgpu, unsigned int offset,
+	void *p_data, unsigned int bytes)
+{
+	struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
+
+	drm_WARN_ON(&i915->drm, 1);
+	return 0;
+}
+
+static int gmbus3_mmio_read(struct intel_vgpu *vgpu, unsigned int offset,
+		void *p_data, unsigned int bytes)
+{
+	int i;
+	unsigned char byte_data;
+	struct intel_vgpu_i2c_edid *i2c_edid = &vgpu->display.i2c_edid;
+	int byte_left = i2c_edid->gmbus.total_byte_count -
+				i2c_edid->current_edid_read;
+	int byte_count = byte_left;
+	u32 reg_data = 0;
+
+	/* Data can only be recevied if previous settings correct */
+	if (vgpu_vreg_t(vgpu, PCH_GMBUS1) & GMBUS_SLAVE_READ) {
+		if (byte_left <= 0) {
+			memcpy(p_data, &vgpu_vreg(vgpu, offset), bytes);
+			return 0;
+		}
+
+		if (byte_count > 4)
+			byte_count = 4;
+		for (i = 0; i < byte_count; i++) {
+			byte_data = edid_get_byte(vgpu);
+			reg_data |= (byte_data << (i << 3));
+		}
+
+		memcpy(&vgpu_vreg(vgpu, offset), &reg_data, byte_count);
+		memcpy(p_data, &vgpu_vreg(vgpu, offset), bytes);
+
+		if (byte_left <= 4) {
+			switch (i2c_edid->gmbus.cycle_type) {
+			case NIDX_STOP:
+			case IDX_STOP:
+				i2c_edid->gmbus.phase = GMBUS_IDLE_PHASE;
+				break;
+			case NIDX_NS_W:
+			case IDX_NS_W:
+			default:
+				i2c_edid->gmbus.phase = GMBUS_WAIT_PHASE;
+				break;
+			}
+			intel_vgpu_init_i2c_edid(vgpu);
+		}
+		/*
+		 * Read GMBUS3 during send operation,
+		 * return the latest written value
+		 */
+	} else {
+		memcpy(p_data, &vgpu_vreg(vgpu, offset), bytes);
+		gvt_vgpu_err("warning: gmbus3 read with nothing returned\n");
+	}
+	return 0;
+}
+
+static int gmbus2_mmio_read(struct intel_vgpu *vgpu, unsigned int offset,
+		void *p_data, unsigned int bytes)
+{
+	u32 value = vgpu_vreg(vgpu, offset);
+
+	if (!(vgpu_vreg(vgpu, offset) & GMBUS_INUSE))
+		vgpu_vreg(vgpu, offset) |= GMBUS_INUSE;
+	memcpy(p_data, (void *)&value, bytes);
+	return 0;
+}
+
+static int gmbus2_mmio_write(struct intel_vgpu *vgpu, unsigned int offset,
+		void *p_data, unsigned int bytes)
+{
+	u32 wvalue = *(u32 *)p_data;
+
+	if (wvalue & GMBUS_INUSE)
+		vgpu_vreg(vgpu, offset) &= ~GMBUS_INUSE;
+	/* All other bits are read-only */
+	return 0;
+}
+
+/**
+ * intel_gvt_i2c_handle_gmbus_read - emulate gmbus register mmio read
+ * @vgpu: a vGPU
+ * @offset: reg offset
+ * @p_data: data return buffer
+ * @bytes: access data length
+ *
+ * This function is used to emulate gmbus register mmio read
+ *
+ * Returns:
+ * Zero on success, negative error code if failed.
+ *
+ */
+int intel_gvt_i2c_handle_gmbus_read(struct intel_vgpu *vgpu,
+	unsigned int offset, void *p_data, unsigned int bytes)
+{
+	struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
+
+	if (drm_WARN_ON(&i915->drm, bytes > 8 && (offset & (bytes - 1))))
+		return -EINVAL;
+
+	if (offset == i915_mmio_reg_offset(PCH_GMBUS2))
+		return gmbus2_mmio_read(vgpu, offset, p_data, bytes);
+	else if (offset == i915_mmio_reg_offset(PCH_GMBUS3))
+		return gmbus3_mmio_read(vgpu, offset, p_data, bytes);
+
+	memcpy(p_data, &vgpu_vreg(vgpu, offset), bytes);
+	return 0;
+}
+
+/**
+ * intel_gvt_i2c_handle_gmbus_write - emulate gmbus register mmio write
+ * @vgpu: a vGPU
+ * @offset: reg offset
+ * @p_data: data return buffer
+ * @bytes: access data length
+ *
+ * This function is used to emulate gmbus register mmio write
+ *
+ * Returns:
+ * Zero on success, negative error code if failed.
+ *
+ */
+int intel_gvt_i2c_handle_gmbus_write(struct intel_vgpu *vgpu,
+		unsigned int offset, void *p_data, unsigned int bytes)
+{
+	struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
+
+	if (drm_WARN_ON(&i915->drm, bytes > 8 && (offset & (bytes - 1))))
+		return -EINVAL;
+
+	if (offset == i915_mmio_reg_offset(PCH_GMBUS0))
+		return gmbus0_mmio_write(vgpu, offset, p_data, bytes);
+	else if (offset == i915_mmio_reg_offset(PCH_GMBUS1))
+		return gmbus1_mmio_write(vgpu, offset, p_data, bytes);
+	else if (offset == i915_mmio_reg_offset(PCH_GMBUS2))
+		return gmbus2_mmio_write(vgpu, offset, p_data, bytes);
+	else if (offset == i915_mmio_reg_offset(PCH_GMBUS3))
+		return gmbus3_mmio_write(vgpu, offset, p_data, bytes);
+
+	memcpy(&vgpu_vreg(vgpu, offset), p_data, bytes);
+	return 0;
+}
+
+enum {
+	AUX_CH_CTL = 0,
+	AUX_CH_DATA1,
+	AUX_CH_DATA2,
+	AUX_CH_DATA3,
+	AUX_CH_DATA4,
+	AUX_CH_DATA5
+};
+
+static inline int get_aux_ch_reg(unsigned int offset)
+{
+	int reg;
+
+	switch (offset & 0xff) {
+	case 0x10:
+		reg = AUX_CH_CTL;
+		break;
+	case 0x14:
+		reg = AUX_CH_DATA1;
+		break;
+	case 0x18:
+		reg = AUX_CH_DATA2;
+		break;
+	case 0x1c:
+		reg = AUX_CH_DATA3;
+		break;
+	case 0x20:
+		reg = AUX_CH_DATA4;
+		break;
+	case 0x24:
+		reg = AUX_CH_DATA5;
+		break;
+	default:
+		reg = -1;
+		break;
+	}
+	return reg;
+}
+
+#define AUX_CTL_MSG_LENGTH(reg) \
+	((reg & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> \
+		DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT)
+
+/**
+ * intel_gvt_i2c_handle_aux_ch_write - emulate AUX channel register write
+ * @vgpu: a vGPU
+ * @port_idx: port index
+ * @offset: reg offset
+ * @p_data: write ptr
+ *
+ * This function is used to emulate AUX channel register write
+ *
+ */
+void intel_gvt_i2c_handle_aux_ch_write(struct intel_vgpu *vgpu,
+				int port_idx,
+				unsigned int offset,
+				void *p_data)
+{
+	struct drm_i915_private *i915 = vgpu->gvt->gt->i915;
+	struct intel_vgpu_i2c_edid *i2c_edid = &vgpu->display.i2c_edid;
+	int msg_length, ret_msg_size;
+	int msg, addr, ctrl, op;
+	u32 value = *(u32 *)p_data;
+	int aux_data_for_write = 0;
+	int reg = get_aux_ch_reg(offset);
+
+	if (reg != AUX_CH_CTL) {
+		vgpu_vreg(vgpu, offset) = value;
+		return;
+	}
+
+	msg_length = AUX_CTL_MSG_LENGTH(value);
+	// check the msg in DATA register.
+	msg = vgpu_vreg(vgpu, offset + 4);
+	addr = (msg >> 8) & 0xffff;
+	ctrl = (msg >> 24) & 0xff;
+	op = ctrl >> 4;
+	if (!(value & DP_AUX_CH_CTL_SEND_BUSY)) {
+		/* The ctl write to clear some states */
+		return;
+	}
+
+	/* Always set the wanted value for vms. */
+	ret_msg_size = (((op & 0x1) == GVT_AUX_I2C_READ) ? 2 : 1);
+	vgpu_vreg(vgpu, offset) =
+		DP_AUX_CH_CTL_DONE |
+		((ret_msg_size << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) &
+		DP_AUX_CH_CTL_MESSAGE_SIZE_MASK);
+
+	if (msg_length == 3) {
+		if (!(op & GVT_AUX_I2C_MOT)) {
+			/* stop */
+			intel_vgpu_init_i2c_edid(vgpu);
+		} else {
+			/* start or restart */
+			i2c_edid->aux_ch.i2c_over_aux_ch = true;
+			i2c_edid->aux_ch.aux_ch_mot = true;
+			if (addr == 0) {
+				/* reset the address */
+				intel_vgpu_init_i2c_edid(vgpu);
+			} else if (addr == EDID_ADDR) {
+				i2c_edid->state = I2C_AUX_CH;
+				i2c_edid->port = port_idx;
+				i2c_edid->slave_selected = true;
+				if (intel_vgpu_has_monitor_on_port(vgpu,
+					port_idx) &&
+					intel_vgpu_port_is_dp(vgpu, port_idx))
+					i2c_edid->edid_available = true;
+			}
+		}
+	} else if ((op & 0x1) == GVT_AUX_I2C_WRITE) {
+		/* TODO
+		 * We only support EDID reading from I2C_over_AUX. And
+		 * we do not expect the index mode to be used. Right now
+		 * the WRITE operation is ignored. It is good enough to
+		 * support the gfx driver to do EDID access.
+		 */
+	} else {
+		if (drm_WARN_ON(&i915->drm, (op & 0x1) != GVT_AUX_I2C_READ))
+			return;
+		if (drm_WARN_ON(&i915->drm, msg_length != 4))
+			return;
+		if (i2c_edid->edid_available && i2c_edid->slave_selected) {
+			unsigned char val = edid_get_byte(vgpu);
+
+			aux_data_for_write = (val << 16);
+		} else
+			aux_data_for_write = (0xff << 16);
+	}
+	/* write the return value in AUX_CH_DATA reg which includes:
+	 * ACK of I2C_WRITE
+	 * returned byte if it is READ
+	 */
+	aux_data_for_write |= GVT_AUX_I2C_REPLY_ACK << 24;
+	vgpu_vreg(vgpu, offset + 4) = aux_data_for_write;
+}
+
+/**
+ * intel_vgpu_init_i2c_edid - initialize vGPU i2c edid emulation
+ * @vgpu: a vGPU
+ *
+ * This function is used to initialize vGPU i2c edid emulation stuffs
+ *
+ */
+void intel_vgpu_init_i2c_edid(struct intel_vgpu *vgpu)
+{
+	struct intel_vgpu_i2c_edid *edid = &vgpu->display.i2c_edid;
+
+	edid->state = I2C_NOT_SPECIFIED;
+
+	edid->port = -1;
+	edid->slave_selected = false;
+	edid->edid_available = false;
+	edid->current_edid_read = 0;
+
+	memset(&edid->gmbus, 0, sizeof(struct intel_vgpu_i2c_gmbus));
+
+	edid->aux_ch.i2c_over_aux_ch = false;
+	edid->aux_ch.aux_ch_mot = false;
+}