Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 455 insertions, 0 deletions

diff --git a/drivers/gpu/drm/udl/udl_modeset.c b/drivers/gpu/drm/udl/udl_modeset.c
new file mode 100644
index 000000000..ec6876f44
--- /dev/null
+++ b/drivers/gpu/drm/udl/udl_modeset.c
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2012 Red Hat
+ *
+ * based in parts on udlfb.c:
+ * Copyright (C) 2009 Roberto De Ioris <roberto@unbit.it>
+ * Copyright (C) 2009 Jaya Kumar <jayakumar.lkml@gmail.com>
+ * Copyright (C) 2009 Bernie Thompson <bernie@plugable.com>
+ */
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_crtc_helper.h>
+#include <drm/drm_damage_helper.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_gem_shmem_helper.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_vblank.h>
+
+#include "udl_drv.h"
+
+#define UDL_COLOR_DEPTH_16BPP	0
+
+/*
+ * All DisplayLink bulk operations start with 0xAF, followed by specific code
+ * All operations are written to buffers which then later get sent to device
+ */
+static char *udl_set_register(char *buf, u8 reg, u8 val)
+{
+	*buf++ = 0xAF;
+	*buf++ = 0x20;
+	*buf++ = reg;
+	*buf++ = val;
+	return buf;
+}
+
+static char *udl_vidreg_lock(char *buf)
+{
+	return udl_set_register(buf, 0xFF, 0x00);
+}
+
+static char *udl_vidreg_unlock(char *buf)
+{
+	return udl_set_register(buf, 0xFF, 0xFF);
+}
+
+static char *udl_set_blank_mode(char *buf, u8 mode)
+{
+	return udl_set_register(buf, UDL_REG_BLANK_MODE, mode);
+}
+
+static char *udl_set_color_depth(char *buf, u8 selection)
+{
+	return udl_set_register(buf, 0x00, selection);
+}
+
+static char *udl_set_base16bpp(char *wrptr, u32 base)
+{
+	/* the base pointer is 16 bits wide, 0x20 is hi byte. */
+	wrptr = udl_set_register(wrptr, 0x20, base >> 16);
+	wrptr = udl_set_register(wrptr, 0x21, base >> 8);
+	return udl_set_register(wrptr, 0x22, base);
+}
+
+/*
+ * DisplayLink HW has separate 16bpp and 8bpp framebuffers.
+ * In 24bpp modes, the low 323 RGB bits go in the 8bpp framebuffer
+ */
+static char *udl_set_base8bpp(char *wrptr, u32 base)
+{
+	wrptr = udl_set_register(wrptr, 0x26, base >> 16);
+	wrptr = udl_set_register(wrptr, 0x27, base >> 8);
+	return udl_set_register(wrptr, 0x28, base);
+}
+
+static char *udl_set_register_16(char *wrptr, u8 reg, u16 value)
+{
+	wrptr = udl_set_register(wrptr, reg, value >> 8);
+	return udl_set_register(wrptr, reg+1, value);
+}
+
+/*
+ * This is kind of weird because the controller takes some
+ * register values in a different byte order than other registers.
+ */
+static char *udl_set_register_16be(char *wrptr, u8 reg, u16 value)
+{
+	wrptr = udl_set_register(wrptr, reg, value);
+	return udl_set_register(wrptr, reg+1, value >> 8);
+}
+
+/*
+ * LFSR is linear feedback shift register. The reason we have this is
+ * because the display controller needs to minimize the clock depth of
+ * various counters used in the display path. So this code reverses the
+ * provided value into the lfsr16 value by counting backwards to get
+ * the value that needs to be set in the hardware comparator to get the
+ * same actual count. This makes sense once you read above a couple of
+ * times and think about it from a hardware perspective.
+ */
+static u16 udl_lfsr16(u16 actual_count)
+{
+	u32 lv = 0xFFFF; /* This is the lfsr value that the hw starts with */
+
+	while (actual_count--) {
+		lv =	 ((lv << 1) |
+			(((lv >> 15) ^ (lv >> 4) ^ (lv >> 2) ^ (lv >> 1)) & 1))
+			& 0xFFFF;
+	}
+
+	return (u16) lv;
+}
+
+/*
+ * This does LFSR conversion on the value that is to be written.
+ * See LFSR explanation above for more detail.
+ */
+static char *udl_set_register_lfsr16(char *wrptr, u8 reg, u16 value)
+{
+	return udl_set_register_16(wrptr, reg, udl_lfsr16(value));
+}
+
+/*
+ * This takes a standard fbdev screeninfo struct and all of its monitor mode
+ * details and converts them into the DisplayLink equivalent register commands.
+  ERR(vreg(dev,               0x00, (color_depth == 16) ? 0 : 1));
+  ERR(vreg_lfsr16(dev,        0x01, xDisplayStart));
+  ERR(vreg_lfsr16(dev,        0x03, xDisplayEnd));
+  ERR(vreg_lfsr16(dev,        0x05, yDisplayStart));
+  ERR(vreg_lfsr16(dev,        0x07, yDisplayEnd));
+  ERR(vreg_lfsr16(dev,        0x09, xEndCount));
+  ERR(vreg_lfsr16(dev,        0x0B, hSyncStart));
+  ERR(vreg_lfsr16(dev,        0x0D, hSyncEnd));
+  ERR(vreg_big_endian(dev,    0x0F, hPixels));
+  ERR(vreg_lfsr16(dev,        0x11, yEndCount));
+  ERR(vreg_lfsr16(dev,        0x13, vSyncStart));
+  ERR(vreg_lfsr16(dev,        0x15, vSyncEnd));
+  ERR(vreg_big_endian(dev,    0x17, vPixels));
+  ERR(vreg_little_endian(dev, 0x1B, pixelClock5KHz));
+
+  ERR(vreg(dev,               0x1F, 0));
+
+  ERR(vbuf(dev, WRITE_VIDREG_UNLOCK, DSIZEOF(WRITE_VIDREG_UNLOCK)));
+ */
+static char *udl_set_vid_cmds(char *wrptr, struct drm_display_mode *mode)
+{
+	u16 xds, yds;
+	u16 xde, yde;
+	u16 yec;
+
+	/* x display start */
+	xds = mode->crtc_htotal - mode->crtc_hsync_start;
+	wrptr = udl_set_register_lfsr16(wrptr, 0x01, xds);
+	/* x display end */
+	xde = xds + mode->crtc_hdisplay;
+	wrptr = udl_set_register_lfsr16(wrptr, 0x03, xde);
+
+	/* y display start */
+	yds = mode->crtc_vtotal - mode->crtc_vsync_start;
+	wrptr = udl_set_register_lfsr16(wrptr, 0x05, yds);
+	/* y display end */
+	yde = yds + mode->crtc_vdisplay;
+	wrptr = udl_set_register_lfsr16(wrptr, 0x07, yde);
+
+	/* x end count is active + blanking - 1 */
+	wrptr = udl_set_register_lfsr16(wrptr, 0x09,
+					mode->crtc_htotal - 1);
+
+	/* libdlo hardcodes hsync start to 1 */
+	wrptr = udl_set_register_lfsr16(wrptr, 0x0B, 1);
+
+	/* hsync end is width of sync pulse + 1 */
+	wrptr = udl_set_register_lfsr16(wrptr, 0x0D,
+					mode->crtc_hsync_end - mode->crtc_hsync_start + 1);
+
+	/* hpixels is active pixels */
+	wrptr = udl_set_register_16(wrptr, 0x0F, mode->hdisplay);
+
+	/* yendcount is vertical active + vertical blanking */
+	yec = mode->crtc_vtotal;
+	wrptr = udl_set_register_lfsr16(wrptr, 0x11, yec);
+
+	/* libdlo hardcodes vsync start to 0 */
+	wrptr = udl_set_register_lfsr16(wrptr, 0x13, 0);
+
+	/* vsync end is width of vsync pulse */
+	wrptr = udl_set_register_lfsr16(wrptr, 0x15, mode->crtc_vsync_end - mode->crtc_vsync_start);
+
+	/* vpixels is active pixels */
+	wrptr = udl_set_register_16(wrptr, 0x17, mode->crtc_vdisplay);
+
+	wrptr = udl_set_register_16be(wrptr, 0x1B,
+				      mode->clock / 5);
+
+	return wrptr;
+}
+
+static char *udl_dummy_render(char *wrptr)
+{
+	*wrptr++ = 0xAF;
+	*wrptr++ = 0x6A; /* copy */
+	*wrptr++ = 0x00; /* from addr */
+	*wrptr++ = 0x00;
+	*wrptr++ = 0x00;
+	*wrptr++ = 0x01; /* one pixel */
+	*wrptr++ = 0x00; /* to address */
+	*wrptr++ = 0x00;
+	*wrptr++ = 0x00;
+	return wrptr;
+}
+
+static int udl_crtc_write_mode_to_hw(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct udl_device *udl = to_udl(dev);
+	struct urb *urb;
+	char *buf;
+	int retval;
+
+	if (udl->mode_buf_len == 0) {
+		DRM_ERROR("No mode set\n");
+		return -EINVAL;
+	}
+
+	urb = udl_get_urb(dev);
+	if (!urb)
+		return -ENOMEM;
+
+	buf = (char *)urb->transfer_buffer;
+
+	memcpy(buf, udl->mode_buf, udl->mode_buf_len);
+	retval = udl_submit_urb(dev, urb, udl->mode_buf_len);
+	DRM_DEBUG("write mode info %d\n", udl->mode_buf_len);
+	return retval;
+}
+
+static long udl_log_cpp(unsigned int cpp)
+{
+	if (WARN_ON(!is_power_of_2(cpp)))
+		return -EINVAL;
+	return __ffs(cpp);
+}
+
+static int udl_handle_damage(struct drm_framebuffer *fb,
+			     const struct iosys_map *map,
+			     const struct drm_rect *clip)
+{
+	struct drm_device *dev = fb->dev;
+	void *vaddr = map->vaddr; /* TODO: Use mapping abstraction properly */
+	int i, ret;
+	char *cmd;
+	struct urb *urb;
+	int log_bpp;
+
+	ret = udl_log_cpp(fb->format->cpp[0]);
+	if (ret < 0)
+		return ret;
+	log_bpp = ret;
+
+	ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE);
+	if (ret)
+		return ret;
+
+	urb = udl_get_urb(dev);
+	if (!urb) {
+		ret = -ENOMEM;
+		goto out_drm_gem_fb_end_cpu_access;
+	}
+	cmd = urb->transfer_buffer;
+
+	for (i = clip->y1; i < clip->y2; i++) {
+		const int line_offset = fb->pitches[0] * i;
+		const int byte_offset = line_offset + (clip->x1 << log_bpp);
+		const int dev_byte_offset = (fb->width * i + clip->x1) << log_bpp;
+		const int byte_width = drm_rect_width(clip) << log_bpp;
+		ret = udl_render_hline(dev, log_bpp, &urb, (char *)vaddr,
+				       &cmd, byte_offset, dev_byte_offset,
+				       byte_width);
+		if (ret)
+			goto out_drm_gem_fb_end_cpu_access;
+	}
+
+	if (cmd > (char *)urb->transfer_buffer) {
+		/* Send partial buffer remaining before exiting */
+		int len;
+		if (cmd < (char *)urb->transfer_buffer + urb->transfer_buffer_length)
+			*cmd++ = 0xAF;
+		len = cmd - (char *)urb->transfer_buffer;
+		ret = udl_submit_urb(dev, urb, len);
+	} else {
+		udl_urb_completion(urb);
+	}
+
+	ret = 0;
+
+out_drm_gem_fb_end_cpu_access:
+	drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE);
+	return ret;
+}
+
+/*
+ * Simple display pipeline
+ */
+
+static const uint32_t udl_simple_display_pipe_formats[] = {
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_XRGB8888,
+};
+
+static enum drm_mode_status
+udl_simple_display_pipe_mode_valid(struct drm_simple_display_pipe *pipe,
+				   const struct drm_display_mode *mode)
+{
+	return MODE_OK;
+}
+
+static void
+udl_simple_display_pipe_enable(struct drm_simple_display_pipe *pipe,
+			       struct drm_crtc_state *crtc_state,
+			       struct drm_plane_state *plane_state)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_device *dev = crtc->dev;
+	struct drm_framebuffer *fb = plane_state->fb;
+	struct udl_device *udl = to_udl(dev);
+	struct drm_display_mode *mode = &crtc_state->mode;
+	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(plane_state);
+	struct drm_rect clip = DRM_RECT_INIT(0, 0, fb->width, fb->height);
+	char *buf;
+	char *wrptr;
+	int color_depth = UDL_COLOR_DEPTH_16BPP;
+
+	buf = (char *)udl->mode_buf;
+
+	/* This first section has to do with setting the base address on the
+	 * controller associated with the display. There are 2 base
+	 * pointers, currently, we only use the 16 bpp segment.
+	 */
+	wrptr = udl_vidreg_lock(buf);
+	wrptr = udl_set_color_depth(wrptr, color_depth);
+	/* set base for 16bpp segment to 0 */
+	wrptr = udl_set_base16bpp(wrptr, 0);
+	/* set base for 8bpp segment to end of fb */
+	wrptr = udl_set_base8bpp(wrptr, 2 * mode->vdisplay * mode->hdisplay);
+
+	wrptr = udl_set_vid_cmds(wrptr, mode);
+	wrptr = udl_set_blank_mode(wrptr, UDL_BLANK_MODE_ON);
+	wrptr = udl_vidreg_unlock(wrptr);
+
+	wrptr = udl_dummy_render(wrptr);
+
+	udl->mode_buf_len = wrptr - buf;
+
+	udl_handle_damage(fb, &shadow_plane_state->data[0], &clip);
+
+	/* enable display */
+	udl_crtc_write_mode_to_hw(crtc);
+}
+
+static void
+udl_simple_display_pipe_disable(struct drm_simple_display_pipe *pipe)
+{
+	struct drm_crtc *crtc = &pipe->crtc;
+	struct drm_device *dev = crtc->dev;
+	struct urb *urb;
+	char *buf;
+
+	urb = udl_get_urb(dev);
+	if (!urb)
+		return;
+
+	buf = (char *)urb->transfer_buffer;
+	buf = udl_vidreg_lock(buf);
+	buf = udl_set_blank_mode(buf, UDL_BLANK_MODE_POWERDOWN);
+	buf = udl_vidreg_unlock(buf);
+	buf = udl_dummy_render(buf);
+
+	udl_submit_urb(dev, urb, buf - (char *)urb->transfer_buffer);
+}
+
+static void
+udl_simple_display_pipe_update(struct drm_simple_display_pipe *pipe,
+			       struct drm_plane_state *old_plane_state)
+{
+	struct drm_plane_state *state = pipe->plane.state;
+	struct drm_shadow_plane_state *shadow_plane_state = to_drm_shadow_plane_state(state);
+	struct drm_framebuffer *fb = state->fb;
+	struct drm_rect rect;
+
+	if (!fb)
+		return;
+
+	if (drm_atomic_helper_damage_merged(old_plane_state, state, &rect))
+		udl_handle_damage(fb, &shadow_plane_state->data[0], &rect);
+}
+
+static const struct drm_simple_display_pipe_funcs udl_simple_display_pipe_funcs = {
+	.mode_valid = udl_simple_display_pipe_mode_valid,
+	.enable = udl_simple_display_pipe_enable,
+	.disable = udl_simple_display_pipe_disable,
+	.update = udl_simple_display_pipe_update,
+	DRM_GEM_SIMPLE_DISPLAY_PIPE_SHADOW_PLANE_FUNCS,
+};
+
+/*
+ * Modesetting
+ */
+
+static const struct drm_mode_config_funcs udl_mode_funcs = {
+	.fb_create = drm_gem_fb_create_with_dirty,
+	.atomic_check  = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+int udl_modeset_init(struct drm_device *dev)
+{
+	size_t format_count = ARRAY_SIZE(udl_simple_display_pipe_formats);
+	struct udl_device *udl = to_udl(dev);
+	struct drm_connector *connector;
+	int ret;
+
+	ret = drmm_mode_config_init(dev);
+	if (ret)
+		return ret;
+
+	dev->mode_config.min_width = 640;
+	dev->mode_config.min_height = 480;
+
+	dev->mode_config.max_width = 2048;
+	dev->mode_config.max_height = 2048;
+
+	dev->mode_config.prefer_shadow = 0;
+	dev->mode_config.preferred_depth = 16;
+
+	dev->mode_config.funcs = &udl_mode_funcs;
+
+	connector = udl_connector_init(dev);
+	if (IS_ERR(connector))
+		return PTR_ERR(connector);
+
+	format_count = ARRAY_SIZE(udl_simple_display_pipe_formats);
+
+	ret = drm_simple_display_pipe_init(dev, &udl->display_pipe,
+					   &udl_simple_display_pipe_funcs,
+					   udl_simple_display_pipe_formats,
+					   format_count, NULL, connector);
+	if (ret)
+		return ret;
+	drm_plane_enable_fb_damage_clips(&udl->display_pipe.plane);
+
+	drm_mode_config_reset(dev);
+
+	return 0;
+}