Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1713 insertions, 0 deletions

diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
new file mode 100644
index 000000000..8d33c2484
--- /dev/null
+++ b/drivers/hwmon/lm85.c
@@ -0,0 +1,1713 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * lm85.c - Part of lm_sensors, Linux kernel modules for hardware
+ *	    monitoring
+ * Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl>
+ * Copyright (c) 2002, 2003  Philip Pokorny <ppokorny@penguincomputing.com>
+ * Copyright (c) 2003        Margit Schubert-While <margitsw@t-online.de>
+ * Copyright (c) 2004        Justin Thiessen <jthiessen@penguincomputing.com>
+ * Copyright (C) 2007--2014  Jean Delvare <jdelvare@suse.de>
+ *
+ * Chip details at	      <http://www.national.com/ds/LM/LM85.pdf>
+ */
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-vid.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/util_macros.h>
+
+/* Addresses to scan */
+static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+
+enum chips {
+	lm85, lm96000,
+	adm1027, adt7463, adt7468,
+	emc6d100, emc6d102, emc6d103, emc6d103s
+};
+
+/* The LM85 registers */
+
+#define LM85_REG_IN(nr)			(0x20 + (nr))
+#define LM85_REG_IN_MIN(nr)		(0x44 + (nr) * 2)
+#define LM85_REG_IN_MAX(nr)		(0x45 + (nr) * 2)
+
+#define LM85_REG_TEMP(nr)		(0x25 + (nr))
+#define LM85_REG_TEMP_MIN(nr)		(0x4e + (nr) * 2)
+#define LM85_REG_TEMP_MAX(nr)		(0x4f + (nr) * 2)
+
+/* Fan speeds are LSB, MSB (2 bytes) */
+#define LM85_REG_FAN(nr)		(0x28 + (nr) * 2)
+#define LM85_REG_FAN_MIN(nr)		(0x54 + (nr) * 2)
+
+#define LM85_REG_PWM(nr)		(0x30 + (nr))
+
+#define LM85_REG_COMPANY		0x3e
+#define LM85_REG_VERSTEP		0x3f
+
+#define ADT7468_REG_CFG5		0x7c
+#define ADT7468_OFF64			(1 << 0)
+#define ADT7468_HFPWM			(1 << 1)
+#define IS_ADT7468_OFF64(data)		\
+	((data)->type == adt7468 && !((data)->cfg5 & ADT7468_OFF64))
+#define IS_ADT7468_HFPWM(data)		\
+	((data)->type == adt7468 && !((data)->cfg5 & ADT7468_HFPWM))
+
+/* These are the recognized values for the above regs */
+#define LM85_COMPANY_NATIONAL		0x01
+#define LM85_COMPANY_ANALOG_DEV		0x41
+#define LM85_COMPANY_SMSC		0x5c
+#define LM85_VERSTEP_LM85C		0x60
+#define LM85_VERSTEP_LM85B		0x62
+#define LM85_VERSTEP_LM96000_1		0x68
+#define LM85_VERSTEP_LM96000_2		0x69
+#define LM85_VERSTEP_ADM1027		0x60
+#define LM85_VERSTEP_ADT7463		0x62
+#define LM85_VERSTEP_ADT7463C		0x6A
+#define LM85_VERSTEP_ADT7468_1		0x71
+#define LM85_VERSTEP_ADT7468_2		0x72
+#define LM85_VERSTEP_EMC6D100_A0        0x60
+#define LM85_VERSTEP_EMC6D100_A1        0x61
+#define LM85_VERSTEP_EMC6D102		0x65
+#define LM85_VERSTEP_EMC6D103_A0	0x68
+#define LM85_VERSTEP_EMC6D103_A1	0x69
+#define LM85_VERSTEP_EMC6D103S		0x6A	/* Also known as EMC6D103:A2 */
+
+#define LM85_REG_CONFIG			0x40
+
+#define LM85_REG_ALARM1			0x41
+#define LM85_REG_ALARM2			0x42
+
+#define LM85_REG_VID			0x43
+
+/* Automated FAN control */
+#define LM85_REG_AFAN_CONFIG(nr)	(0x5c + (nr))
+#define LM85_REG_AFAN_RANGE(nr)		(0x5f + (nr))
+#define LM85_REG_AFAN_SPIKE1		0x62
+#define LM85_REG_AFAN_MINPWM(nr)	(0x64 + (nr))
+#define LM85_REG_AFAN_LIMIT(nr)		(0x67 + (nr))
+#define LM85_REG_AFAN_CRITICAL(nr)	(0x6a + (nr))
+#define LM85_REG_AFAN_HYST1		0x6d
+#define LM85_REG_AFAN_HYST2		0x6e
+
+#define ADM1027_REG_EXTEND_ADC1		0x76
+#define ADM1027_REG_EXTEND_ADC2		0x77
+
+#define EMC6D100_REG_ALARM3             0x7d
+/* IN5, IN6 and IN7 */
+#define EMC6D100_REG_IN(nr)             (0x70 + ((nr) - 5))
+#define EMC6D100_REG_IN_MIN(nr)         (0x73 + ((nr) - 5) * 2)
+#define EMC6D100_REG_IN_MAX(nr)         (0x74 + ((nr) - 5) * 2)
+#define EMC6D102_REG_EXTEND_ADC1	0x85
+#define EMC6D102_REG_EXTEND_ADC2	0x86
+#define EMC6D102_REG_EXTEND_ADC3	0x87
+#define EMC6D102_REG_EXTEND_ADC4	0x88
+
+/*
+ * Conversions. Rounding and limit checking is only done on the TO_REG
+ * variants. Note that you should be a bit careful with which arguments
+ * these macros are called: arguments may be evaluated more than once.
+ */
+
+/* IN are scaled according to built-in resistors */
+static const int lm85_scaling[] = {  /* .001 Volts */
+	2500, 2250, 3300, 5000, 12000,
+	3300, 1500, 1800 /*EMC6D100*/
+};
+#define SCALE(val, from, to)	(((val) * (to) + ((from) / 2)) / (from))
+
+#define INS_TO_REG(n, val)	\
+		SCALE(clamp_val(val, 0, 255 * lm85_scaling[n] / 192), \
+		      lm85_scaling[n], 192)
+
+#define INSEXT_FROM_REG(n, val, ext)	\
+		SCALE(((val) << 4) + (ext), 192 << 4, lm85_scaling[n])
+
+#define INS_FROM_REG(n, val)	SCALE((val), 192, lm85_scaling[n])
+
+/* FAN speed is measured using 90kHz clock */
+static inline u16 FAN_TO_REG(unsigned long val)
+{
+	if (!val)
+		return 0xffff;
+	return clamp_val(5400000 / val, 1, 0xfffe);
+}
+#define FAN_FROM_REG(val)	((val) == 0 ? -1 : (val) == 0xffff ? 0 : \
+				 5400000 / (val))
+
+/* Temperature is reported in .001 degC increments */
+#define TEMP_TO_REG(val)	\
+		DIV_ROUND_CLOSEST(clamp_val((val), -127000, 127000), 1000)
+#define TEMPEXT_FROM_REG(val, ext)	\
+		SCALE(((val) << 4) + (ext), 16, 1000)
+#define TEMP_FROM_REG(val)	((val) * 1000)
+
+#define PWM_TO_REG(val)			clamp_val(val, 0, 255)
+#define PWM_FROM_REG(val)		(val)
+
+/*
+ * ZONEs have the following parameters:
+ *    Limit (low) temp,           1. degC
+ *    Hysteresis (below limit),   1. degC (0-15)
+ *    Range of speed control,     .1 degC (2-80)
+ *    Critical (high) temp,       1. degC
+ *
+ * FAN PWMs have the following parameters:
+ *    Reference Zone,                 1, 2, 3, etc.
+ *    Spinup time,                    .05 sec
+ *    PWM value at limit/low temp,    1 count
+ *    PWM Frequency,                  1. Hz
+ *    PWM is Min or OFF below limit,  flag
+ *    Invert PWM output,              flag
+ *
+ * Some chips filter the temp, others the fan.
+ *    Filter constant (or disabled)   .1 seconds
+ */
+
+/* These are the zone temperature range encodings in .001 degree C */
+static const int lm85_range_map[] = {
+	2000, 2500, 3300, 4000, 5000, 6600, 8000, 10000,
+	13300, 16000, 20000, 26600, 32000, 40000, 53300, 80000
+};
+
+static int RANGE_TO_REG(long range)
+{
+	return find_closest(range, lm85_range_map, ARRAY_SIZE(lm85_range_map));
+}
+#define RANGE_FROM_REG(val)	lm85_range_map[(val) & 0x0f]
+
+/* These are the PWM frequency encodings */
+static const int lm85_freq_map[] = { /* 1 Hz */
+	10, 15, 23, 30, 38, 47, 61, 94
+};
+
+static const int lm96000_freq_map[] = { /* 1 Hz */
+	10, 15, 23, 30, 38, 47, 61, 94,
+	22500, 24000, 25700, 25700, 27700, 27700, 30000, 30000
+};
+
+static const int adm1027_freq_map[] = { /* 1 Hz */
+	11, 15, 22, 29, 35, 44, 59, 88
+};
+
+static int FREQ_TO_REG(const int *map,
+		       unsigned int map_size, unsigned long freq)
+{
+	return find_closest(freq, map, map_size);
+}
+
+static int FREQ_FROM_REG(const int *map, unsigned int map_size, u8 reg)
+{
+	return map[reg % map_size];
+}
+
+/*
+ * Since we can't use strings, I'm abusing these numbers
+ *   to stand in for the following meanings:
+ *      1 -- PWM responds to Zone 1
+ *      2 -- PWM responds to Zone 2
+ *      3 -- PWM responds to Zone 3
+ *     23 -- PWM responds to the higher temp of Zone 2 or 3
+ *    123 -- PWM responds to highest of Zone 1, 2, or 3
+ *      0 -- PWM is always at 0% (ie, off)
+ *     -1 -- PWM is always at 100%
+ *     -2 -- PWM responds to manual control
+ */
+
+static const int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
+#define ZONE_FROM_REG(val)	lm85_zone_map[(val) >> 5]
+
+static int ZONE_TO_REG(int zone)
+{
+	int i;
+
+	for (i = 0; i <= 7; ++i)
+		if (zone == lm85_zone_map[i])
+			break;
+	if (i > 7)   /* Not found. */
+		i = 3;  /* Always 100% */
+	return i << 5;
+}
+
+#define HYST_TO_REG(val)	clamp_val(((val) + 500) / 1000, 0, 15)
+#define HYST_FROM_REG(val)	((val) * 1000)
+
+/*
+ * Chip sampling rates
+ *
+ * Some sensors are not updated more frequently than once per second
+ *    so it doesn't make sense to read them more often than that.
+ *    We cache the results and return the saved data if the driver
+ *    is called again before a second has elapsed.
+ *
+ * Also, there is significant configuration data for this chip
+ *    given the automatic PWM fan control that is possible.  There
+ *    are about 47 bytes of config data to only 22 bytes of actual
+ *    readings.  So, we keep the config data up to date in the cache
+ *    when it is written and only sample it once every 1 *minute*
+ */
+#define LM85_DATA_INTERVAL  (HZ + HZ / 2)
+#define LM85_CONFIG_INTERVAL  (1 * 60 * HZ)
+
+/*
+ * LM85 can automatically adjust fan speeds based on temperature
+ * This structure encapsulates an entire Zone config.  There are
+ * three zones (one for each temperature input) on the lm85
+ */
+struct lm85_zone {
+	s8 limit;	/* Low temp limit */
+	u8 hyst;	/* Low limit hysteresis. (0-15) */
+	u8 range;	/* Temp range, encoded */
+	s8 critical;	/* "All fans ON" temp limit */
+	u8 max_desired; /*
+			 * Actual "max" temperature specified.  Preserved
+			 * to prevent "drift" as other autofan control
+			 * values change.
+			 */
+};
+
+struct lm85_autofan {
+	u8 config;	/* Register value */
+	u8 min_pwm;	/* Minimum PWM value, encoded */
+	u8 min_off;	/* Min PWM or OFF below "limit", flag */
+};
+
+/*
+ * For each registered chip, we need to keep some data in memory.
+ * The structure is dynamically allocated.
+ */
+struct lm85_data {
+	struct i2c_client *client;
+	const struct attribute_group *groups[6];
+	const int *freq_map;
+	unsigned int freq_map_size;
+
+	enum chips type;
+
+	bool has_vid5;	/* true if VID5 is configured for ADT7463 or ADT7468 */
+
+	struct mutex update_lock;
+	bool valid;		/* true if following fields are valid */
+	unsigned long last_reading;	/* In jiffies */
+	unsigned long last_config;	/* In jiffies */
+
+	u8 in[8];		/* Register value */
+	u8 in_max[8];		/* Register value */
+	u8 in_min[8];		/* Register value */
+	s8 temp[3];		/* Register value */
+	s8 temp_min[3];		/* Register value */
+	s8 temp_max[3];		/* Register value */
+	u16 fan[4];		/* Register value */
+	u16 fan_min[4];		/* Register value */
+	u8 pwm[3];		/* Register value */
+	u8 pwm_freq[3];		/* Register encoding */
+	u8 temp_ext[3];		/* Decoded values */
+	u8 in_ext[8];		/* Decoded values */
+	u8 vid;			/* Register value */
+	u8 vrm;			/* VRM version */
+	u32 alarms;		/* Register encoding, combined */
+	u8 cfg5;		/* Config Register 5 on ADT7468 */
+	struct lm85_autofan autofan[3];
+	struct lm85_zone zone[3];
+};
+
+static int lm85_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+
+	/* What size location is it? */
+	switch (reg) {
+	case LM85_REG_FAN(0):  /* Read WORD data */
+	case LM85_REG_FAN(1):
+	case LM85_REG_FAN(2):
+	case LM85_REG_FAN(3):
+	case LM85_REG_FAN_MIN(0):
+	case LM85_REG_FAN_MIN(1):
+	case LM85_REG_FAN_MIN(2):
+	case LM85_REG_FAN_MIN(3):
+	case LM85_REG_ALARM1:	/* Read both bytes at once */
+		res = i2c_smbus_read_byte_data(client, reg) & 0xff;
+		res |= i2c_smbus_read_byte_data(client, reg + 1) << 8;
+		break;
+	default:	/* Read BYTE data */
+		res = i2c_smbus_read_byte_data(client, reg);
+		break;
+	}
+
+	return res;
+}
+
+static void lm85_write_value(struct i2c_client *client, u8 reg, int value)
+{
+	switch (reg) {
+	case LM85_REG_FAN(0):  /* Write WORD data */
+	case LM85_REG_FAN(1):
+	case LM85_REG_FAN(2):
+	case LM85_REG_FAN(3):
+	case LM85_REG_FAN_MIN(0):
+	case LM85_REG_FAN_MIN(1):
+	case LM85_REG_FAN_MIN(2):
+	case LM85_REG_FAN_MIN(3):
+	/* NOTE: ALARM is read only, so not included here */
+		i2c_smbus_write_byte_data(client, reg, value & 0xff);
+		i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+		break;
+	default:	/* Write BYTE data */
+		i2c_smbus_write_byte_data(client, reg, value);
+		break;
+	}
+}
+
+static struct lm85_data *lm85_update_device(struct device *dev)
+{
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int i;
+
+	mutex_lock(&data->update_lock);
+
+	if (!data->valid ||
+	     time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL)) {
+		/* Things that change quickly */
+		dev_dbg(&client->dev, "Reading sensor values\n");
+
+		/*
+		 * Have to read extended bits first to "freeze" the
+		 * more significant bits that are read later.
+		 * There are 2 additional resolution bits per channel and we
+		 * have room for 4, so we shift them to the left.
+		 */
+		if (data->type == adm1027 || data->type == adt7463 ||
+		    data->type == adt7468) {
+			int ext1 = lm85_read_value(client,
+						   ADM1027_REG_EXTEND_ADC1);
+			int ext2 =  lm85_read_value(client,
+						    ADM1027_REG_EXTEND_ADC2);
+			int val = (ext1 << 8) + ext2;
+
+			for (i = 0; i <= 4; i++)
+				data->in_ext[i] =
+					((val >> (i * 2)) & 0x03) << 2;
+
+			for (i = 0; i <= 2; i++)
+				data->temp_ext[i] =
+					(val >> ((i + 4) * 2)) & 0x0c;
+		}
+
+		data->vid = lm85_read_value(client, LM85_REG_VID);
+
+		for (i = 0; i <= 3; ++i) {
+			data->in[i] =
+			    lm85_read_value(client, LM85_REG_IN(i));
+			data->fan[i] =
+			    lm85_read_value(client, LM85_REG_FAN(i));
+		}
+
+		if (!data->has_vid5)
+			data->in[4] = lm85_read_value(client, LM85_REG_IN(4));
+
+		if (data->type == adt7468)
+			data->cfg5 = lm85_read_value(client, ADT7468_REG_CFG5);
+
+		for (i = 0; i <= 2; ++i) {
+			data->temp[i] =
+			    lm85_read_value(client, LM85_REG_TEMP(i));
+			data->pwm[i] =
+			    lm85_read_value(client, LM85_REG_PWM(i));
+
+			if (IS_ADT7468_OFF64(data))
+				data->temp[i] -= 64;
+		}
+
+		data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
+
+		if (data->type == emc6d100) {
+			/* Three more voltage sensors */
+			for (i = 5; i <= 7; ++i) {
+				data->in[i] = lm85_read_value(client,
+							EMC6D100_REG_IN(i));
+			}
+			/* More alarm bits */
+			data->alarms |= lm85_read_value(client,
+						EMC6D100_REG_ALARM3) << 16;
+		} else if (data->type == emc6d102 || data->type == emc6d103 ||
+			   data->type == emc6d103s) {
+			/*
+			 * Have to read LSB bits after the MSB ones because
+			 * the reading of the MSB bits has frozen the
+			 * LSBs (backward from the ADM1027).
+			 */
+			int ext1 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC1);
+			int ext2 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC2);
+			int ext3 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC3);
+			int ext4 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC4);
+			data->in_ext[0] = ext3 & 0x0f;
+			data->in_ext[1] = ext4 & 0x0f;
+			data->in_ext[2] = ext4 >> 4;
+			data->in_ext[3] = ext3 >> 4;
+			data->in_ext[4] = ext2 >> 4;
+
+			data->temp_ext[0] = ext1 & 0x0f;
+			data->temp_ext[1] = ext2 & 0x0f;
+			data->temp_ext[2] = ext1 >> 4;
+		}
+
+		data->last_reading = jiffies;
+	}  /* last_reading */
+
+	if (!data->valid ||
+	     time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL)) {
+		/* Things that don't change often */
+		dev_dbg(&client->dev, "Reading config values\n");
+
+		for (i = 0; i <= 3; ++i) {
+			data->in_min[i] =
+			    lm85_read_value(client, LM85_REG_IN_MIN(i));
+			data->in_max[i] =
+			    lm85_read_value(client, LM85_REG_IN_MAX(i));
+			data->fan_min[i] =
+			    lm85_read_value(client, LM85_REG_FAN_MIN(i));
+		}
+
+		if (!data->has_vid5)  {
+			data->in_min[4] = lm85_read_value(client,
+					  LM85_REG_IN_MIN(4));
+			data->in_max[4] = lm85_read_value(client,
+					  LM85_REG_IN_MAX(4));
+		}
+
+		if (data->type == emc6d100) {
+			for (i = 5; i <= 7; ++i) {
+				data->in_min[i] = lm85_read_value(client,
+						EMC6D100_REG_IN_MIN(i));
+				data->in_max[i] = lm85_read_value(client,
+						EMC6D100_REG_IN_MAX(i));
+			}
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			int val;
+
+			data->temp_min[i] =
+			    lm85_read_value(client, LM85_REG_TEMP_MIN(i));
+			data->temp_max[i] =
+			    lm85_read_value(client, LM85_REG_TEMP_MAX(i));
+
+			data->autofan[i].config =
+			    lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
+			val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
+			data->pwm_freq[i] = val % data->freq_map_size;
+			data->zone[i].range = val >> 4;
+			data->autofan[i].min_pwm =
+			    lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
+			data->zone[i].limit =
+			    lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
+			data->zone[i].critical =
+			    lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
+
+			if (IS_ADT7468_OFF64(data)) {
+				data->temp_min[i] -= 64;
+				data->temp_max[i] -= 64;
+				data->zone[i].limit -= 64;
+				data->zone[i].critical -= 64;
+			}
+		}
+
+		if (data->type != emc6d103s) {
+			i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
+			data->autofan[0].min_off = (i & 0x20) != 0;
+			data->autofan[1].min_off = (i & 0x40) != 0;
+			data->autofan[2].min_off = (i & 0x80) != 0;
+
+			i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
+			data->zone[0].hyst = i >> 4;
+			data->zone[1].hyst = i & 0x0f;
+
+			i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
+			data->zone[2].hyst = i >> 4;
+		}
+
+		data->last_config = jiffies;
+	}  /* last_config */
+
+	data->valid = true;
+
+	mutex_unlock(&data->update_lock);
+
+	return data;
+}
+
+/* 4 Fans */
+static ssize_t fan_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan[nr]));
+}
+
+static ssize_t fan_min_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", FAN_FROM_REG(data->fan_min[nr]));
+}
+
+static ssize_t fan_min_store(struct device *dev,
+			     struct device_attribute *attr, const char *buf,
+			     size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val);
+	lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_RO(fan1_input, fan, 0);
+static SENSOR_DEVICE_ATTR_RW(fan1_min, fan_min, 0);
+static SENSOR_DEVICE_ATTR_RO(fan2_input, fan, 1);
+static SENSOR_DEVICE_ATTR_RW(fan2_min, fan_min, 1);
+static SENSOR_DEVICE_ATTR_RO(fan3_input, fan, 2);
+static SENSOR_DEVICE_ATTR_RW(fan3_min, fan_min, 2);
+static SENSOR_DEVICE_ATTR_RO(fan4_input, fan, 3);
+static SENSOR_DEVICE_ATTR_RW(fan4_min, fan_min, 3);
+
+/* vid, vrm, alarms */
+
+static ssize_t cpu0_vid_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	int vid;
+
+	if (data->has_vid5) {
+		/* 6-pin VID (VRM 10) */
+		vid = vid_from_reg(data->vid & 0x3f, data->vrm);
+	} else {
+		/* 5-pin VID (VRM 9) */
+		vid = vid_from_reg(data->vid & 0x1f, data->vrm);
+	}
+
+	return sprintf(buf, "%d\n", vid);
+}
+
+static DEVICE_ATTR_RO(cpu0_vid);
+
+static ssize_t vrm_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	struct lm85_data *data = dev_get_drvdata(dev);
+	return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+
+static ssize_t vrm_store(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	struct lm85_data *data = dev_get_drvdata(dev);
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	if (val > 255)
+		return -EINVAL;
+
+	data->vrm = val;
+	return count;
+}
+
+static DEVICE_ATTR_RW(vrm);
+
+static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+
+static DEVICE_ATTR_RO(alarms);
+
+static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%u\n", (data->alarms >> nr) & 1);
+}
+
+static SENSOR_DEVICE_ATTR_RO(in0_alarm, alarm, 0);
+static SENSOR_DEVICE_ATTR_RO(in1_alarm, alarm, 1);
+static SENSOR_DEVICE_ATTR_RO(in2_alarm, alarm, 2);
+static SENSOR_DEVICE_ATTR_RO(in3_alarm, alarm, 3);
+static SENSOR_DEVICE_ATTR_RO(in4_alarm, alarm, 8);
+static SENSOR_DEVICE_ATTR_RO(in5_alarm, alarm, 18);
+static SENSOR_DEVICE_ATTR_RO(in6_alarm, alarm, 16);
+static SENSOR_DEVICE_ATTR_RO(in7_alarm, alarm, 17);
+static SENSOR_DEVICE_ATTR_RO(temp1_alarm, alarm, 4);
+static SENSOR_DEVICE_ATTR_RO(temp1_fault, alarm, 14);
+static SENSOR_DEVICE_ATTR_RO(temp2_alarm, alarm, 5);
+static SENSOR_DEVICE_ATTR_RO(temp3_alarm, alarm, 6);
+static SENSOR_DEVICE_ATTR_RO(temp3_fault, alarm, 15);
+static SENSOR_DEVICE_ATTR_RO(fan1_alarm, alarm, 10);
+static SENSOR_DEVICE_ATTR_RO(fan2_alarm, alarm, 11);
+static SENSOR_DEVICE_ATTR_RO(fan3_alarm, alarm, 12);
+static SENSOR_DEVICE_ATTR_RO(fan4_alarm, alarm, 13);
+
+/* pwm */
+
+static ssize_t pwm_show(struct device *dev, struct device_attribute *attr,
+			char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->pwm[nr]));
+}
+
+static ssize_t pwm_store(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->pwm[nr] = PWM_TO_REG(val);
+	lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t pwm_enable_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	int pwm_zone, enable;
+
+	pwm_zone = ZONE_FROM_REG(data->autofan[nr].config);
+	switch (pwm_zone) {
+	case -1:	/* PWM is always at 100% */
+		enable = 0;
+		break;
+	case 0:		/* PWM is always at 0% */
+	case -2:	/* PWM responds to manual control */
+		enable = 1;
+		break;
+	default:	/* PWM in automatic mode */
+		enable = 2;
+	}
+	return sprintf(buf, "%d\n", enable);
+}
+
+static ssize_t pwm_enable_store(struct device *dev,
+				struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	u8 config;
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	switch (val) {
+	case 0:
+		config = 3;
+		break;
+	case 1:
+		config = 7;
+		break;
+	case 2:
+		/*
+		 * Here we have to choose arbitrarily one of the 5 possible
+		 * configurations; I go for the safest
+		 */
+		config = 6;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->update_lock);
+	data->autofan[nr].config = lm85_read_value(client,
+		LM85_REG_AFAN_CONFIG(nr));
+	data->autofan[nr].config = (data->autofan[nr].config & ~0xe0)
+		| (config << 5);
+	lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
+		data->autofan[nr].config);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t pwm_freq_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	int freq;
+
+	if (IS_ADT7468_HFPWM(data))
+		freq = 22500;
+	else
+		freq = FREQ_FROM_REG(data->freq_map, data->freq_map_size,
+				     data->pwm_freq[nr]);
+
+	return sprintf(buf, "%d\n", freq);
+}
+
+static ssize_t pwm_freq_store(struct device *dev,
+			      struct device_attribute *attr, const char *buf,
+			      size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	/*
+	 * The ADT7468 has a special high-frequency PWM output mode,
+	 * where all PWM outputs are driven by a 22.5 kHz clock.
+	 * This might confuse the user, but there's not much we can do.
+	 */
+	if (data->type == adt7468 && val >= 11300) {	/* High freq. mode */
+		data->cfg5 &= ~ADT7468_HFPWM;
+		lm85_write_value(client, ADT7468_REG_CFG5, data->cfg5);
+	} else {					/* Low freq. mode */
+		data->pwm_freq[nr] = FREQ_TO_REG(data->freq_map,
+						 data->freq_map_size, val);
+		lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+				 (data->zone[nr].range << 4)
+				 | data->pwm_freq[nr]);
+		if (data->type == adt7468) {
+			data->cfg5 |= ADT7468_HFPWM;
+			lm85_write_value(client, ADT7468_REG_CFG5, data->cfg5);
+		}
+	}
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_RW(pwm1, pwm, 0);
+static SENSOR_DEVICE_ATTR_RW(pwm1_enable, pwm_enable, 0);
+static SENSOR_DEVICE_ATTR_RW(pwm1_freq, pwm_freq, 0);
+static SENSOR_DEVICE_ATTR_RW(pwm2, pwm, 1);
+static SENSOR_DEVICE_ATTR_RW(pwm2_enable, pwm_enable, 1);
+static SENSOR_DEVICE_ATTR_RW(pwm2_freq, pwm_freq, 1);
+static SENSOR_DEVICE_ATTR_RW(pwm3, pwm, 2);
+static SENSOR_DEVICE_ATTR_RW(pwm3_enable, pwm_enable, 2);
+static SENSOR_DEVICE_ATTR_RW(pwm3_freq, pwm_freq, 2);
+
+/* Voltages */
+
+static ssize_t in_show(struct device *dev, struct device_attribute *attr,
+		       char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", INSEXT_FROM_REG(nr, data->in[nr],
+						    data->in_ext[nr]));
+}
+
+static ssize_t in_min_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_min[nr]));
+}
+
+static ssize_t in_min_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->in_min[nr] = INS_TO_REG(nr, val);
+	lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t in_max_show(struct device *dev, struct device_attribute *attr,
+			   char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", INS_FROM_REG(nr, data->in_max[nr]));
+}
+
+static ssize_t in_max_store(struct device *dev, struct device_attribute *attr,
+			    const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->in_max[nr] = INS_TO_REG(nr, val);
+	lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_RO(in0_input, in, 0);
+static SENSOR_DEVICE_ATTR_RW(in0_min, in_min, 0);
+static SENSOR_DEVICE_ATTR_RW(in0_max, in_max, 0);
+static SENSOR_DEVICE_ATTR_RO(in1_input, in, 1);
+static SENSOR_DEVICE_ATTR_RW(in1_min, in_min, 1);
+static SENSOR_DEVICE_ATTR_RW(in1_max, in_max, 1);
+static SENSOR_DEVICE_ATTR_RO(in2_input, in, 2);
+static SENSOR_DEVICE_ATTR_RW(in2_min, in_min, 2);
+static SENSOR_DEVICE_ATTR_RW(in2_max, in_max, 2);
+static SENSOR_DEVICE_ATTR_RO(in3_input, in, 3);
+static SENSOR_DEVICE_ATTR_RW(in3_min, in_min, 3);
+static SENSOR_DEVICE_ATTR_RW(in3_max, in_max, 3);
+static SENSOR_DEVICE_ATTR_RO(in4_input, in, 4);
+static SENSOR_DEVICE_ATTR_RW(in4_min, in_min, 4);
+static SENSOR_DEVICE_ATTR_RW(in4_max, in_max, 4);
+static SENSOR_DEVICE_ATTR_RO(in5_input, in, 5);
+static SENSOR_DEVICE_ATTR_RW(in5_min, in_min, 5);
+static SENSOR_DEVICE_ATTR_RW(in5_max, in_max, 5);
+static SENSOR_DEVICE_ATTR_RO(in6_input, in, 6);
+static SENSOR_DEVICE_ATTR_RW(in6_min, in_min, 6);
+static SENSOR_DEVICE_ATTR_RW(in6_max, in_max, 6);
+static SENSOR_DEVICE_ATTR_RO(in7_input, in, 7);
+static SENSOR_DEVICE_ATTR_RW(in7_min, in_min, 7);
+static SENSOR_DEVICE_ATTR_RW(in7_max, in_max, 7);
+
+/* Temps */
+
+static ssize_t temp_show(struct device *dev, struct device_attribute *attr,
+			 char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", TEMPEXT_FROM_REG(data->temp[nr],
+						     data->temp_ext[nr]));
+}
+
+static ssize_t temp_min_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_min[nr]));
+}
+
+static ssize_t temp_min_store(struct device *dev,
+			      struct device_attribute *attr, const char *buf,
+			      size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	if (IS_ADT7468_OFF64(data))
+		val += 64;
+
+	mutex_lock(&data->update_lock);
+	data->temp_min[nr] = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t temp_max_show(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max[nr]));
+}
+
+static ssize_t temp_max_store(struct device *dev,
+			      struct device_attribute *attr, const char *buf,
+			      size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	if (IS_ADT7468_OFF64(data))
+		val += 64;
+
+	mutex_lock(&data->update_lock);
+	data->temp_max[nr] = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, 0);
+static SENSOR_DEVICE_ATTR_RW(temp1_min, temp_min, 0);
+static SENSOR_DEVICE_ATTR_RW(temp1_max, temp_max, 0);
+static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, 1);
+static SENSOR_DEVICE_ATTR_RW(temp2_min, temp_min, 1);
+static SENSOR_DEVICE_ATTR_RW(temp2_max, temp_max, 1);
+static SENSOR_DEVICE_ATTR_RO(temp3_input, temp, 2);
+static SENSOR_DEVICE_ATTR_RW(temp3_min, temp_min, 2);
+static SENSOR_DEVICE_ATTR_RW(temp3_max, temp_max, 2);
+
+/* Automatic PWM control */
+
+static ssize_t pwm_auto_channels_show(struct device *dev,
+				      struct device_attribute *attr,
+				      char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", ZONE_FROM_REG(data->autofan[nr].config));
+}
+
+static ssize_t pwm_auto_channels_store(struct device *dev,
+				       struct device_attribute *attr,
+				       const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
+		| ZONE_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
+		data->autofan[nr].config);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t pwm_auto_pwm_min_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
+}
+
+static ssize_t pwm_auto_pwm_min_store(struct device *dev,
+				      struct device_attribute *attr,
+				      const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	unsigned long val;
+	int err;
+
+	err = kstrtoul(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->autofan[nr].min_pwm = PWM_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr),
+		data->autofan[nr].min_pwm);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t pwm_auto_pwm_minctl_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", data->autofan[nr].min_off);
+}
+
+static ssize_t pwm_auto_pwm_minctl_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	u8 tmp;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->autofan[nr].min_off = val;
+	tmp = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
+	tmp &= ~(0x20 << nr);
+	if (data->autofan[nr].min_off)
+		tmp |= 0x20 << nr;
+	lm85_write_value(client, LM85_REG_AFAN_SPIKE1, tmp);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_RW(pwm1_auto_channels, pwm_auto_channels, 0);
+static SENSOR_DEVICE_ATTR_RW(pwm1_auto_pwm_min, pwm_auto_pwm_min, 0);
+static SENSOR_DEVICE_ATTR_RW(pwm1_auto_pwm_minctl, pwm_auto_pwm_minctl, 0);
+static SENSOR_DEVICE_ATTR_RW(pwm2_auto_channels, pwm_auto_channels, 1);
+static SENSOR_DEVICE_ATTR_RW(pwm2_auto_pwm_min, pwm_auto_pwm_min, 1);
+static SENSOR_DEVICE_ATTR_RW(pwm2_auto_pwm_minctl, pwm_auto_pwm_minctl, 1);
+static SENSOR_DEVICE_ATTR_RW(pwm3_auto_channels, pwm_auto_channels, 2);
+static SENSOR_DEVICE_ATTR_RW(pwm3_auto_pwm_min, pwm_auto_pwm_min, 2);
+static SENSOR_DEVICE_ATTR_RW(pwm3_auto_pwm_minctl, pwm_auto_pwm_minctl, 2);
+
+/* Temperature settings for automatic PWM control */
+
+static ssize_t temp_auto_temp_off_show(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
+		HYST_FROM_REG(data->zone[nr].hyst));
+}
+
+static ssize_t temp_auto_temp_off_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int min;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	min = TEMP_FROM_REG(data->zone[nr].limit);
+	data->zone[nr].hyst = HYST_TO_REG(min - val);
+	if (nr == 0 || nr == 1) {
+		lm85_write_value(client, LM85_REG_AFAN_HYST1,
+			(data->zone[0].hyst << 4)
+			| data->zone[1].hyst);
+	} else {
+		lm85_write_value(client, LM85_REG_AFAN_HYST2,
+			(data->zone[2].hyst << 4));
+	}
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t temp_auto_temp_min_show(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit));
+}
+
+static ssize_t temp_auto_temp_min_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->zone[nr].limit = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr),
+		data->zone[nr].limit);
+
+/* Update temp_auto_max and temp_auto_range */
+	data->zone[nr].range = RANGE_TO_REG(
+		TEMP_FROM_REG(data->zone[nr].max_desired) -
+		TEMP_FROM_REG(data->zone[nr].limit));
+	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+		((data->zone[nr].range & 0x0f) << 4)
+		| data->pwm_freq[nr]);
+
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t temp_auto_temp_max_show(struct device *dev,
+				       struct device_attribute *attr,
+				       char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
+		RANGE_FROM_REG(data->zone[nr].range));
+}
+
+static ssize_t temp_auto_temp_max_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	int min;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	min = TEMP_FROM_REG(data->zone[nr].limit);
+	data->zone[nr].max_desired = TEMP_TO_REG(val);
+	data->zone[nr].range = RANGE_TO_REG(
+		val - min);
+	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+		((data->zone[nr].range & 0x0f) << 4)
+		| data->pwm_freq[nr]);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static ssize_t temp_auto_temp_crit_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%d\n", TEMP_FROM_REG(data->zone[nr].critical));
+}
+
+static ssize_t temp_auto_temp_crit_store(struct device *dev,
+					 struct device_attribute *attr,
+					 const char *buf, size_t count)
+{
+	int nr = to_sensor_dev_attr(attr)->index;
+	struct lm85_data *data = dev_get_drvdata(dev);
+	struct i2c_client *client = data->client;
+	long val;
+	int err;
+
+	err = kstrtol(buf, 10, &val);
+	if (err)
+		return err;
+
+	mutex_lock(&data->update_lock);
+	data->zone[nr].critical = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr),
+		data->zone[nr].critical);
+	mutex_unlock(&data->update_lock);
+	return count;
+}
+
+static SENSOR_DEVICE_ATTR_RW(temp1_auto_temp_off, temp_auto_temp_off, 0);
+static SENSOR_DEVICE_ATTR_RW(temp1_auto_temp_min, temp_auto_temp_min, 0);
+static SENSOR_DEVICE_ATTR_RW(temp1_auto_temp_max, temp_auto_temp_max, 0);
+static SENSOR_DEVICE_ATTR_RW(temp1_auto_temp_crit, temp_auto_temp_crit, 0);
+static SENSOR_DEVICE_ATTR_RW(temp2_auto_temp_off, temp_auto_temp_off, 1);
+static SENSOR_DEVICE_ATTR_RW(temp2_auto_temp_min, temp_auto_temp_min, 1);
+static SENSOR_DEVICE_ATTR_RW(temp2_auto_temp_max, temp_auto_temp_max, 1);
+static SENSOR_DEVICE_ATTR_RW(temp2_auto_temp_crit, temp_auto_temp_crit, 1);
+static SENSOR_DEVICE_ATTR_RW(temp3_auto_temp_off, temp_auto_temp_off, 2);
+static SENSOR_DEVICE_ATTR_RW(temp3_auto_temp_min, temp_auto_temp_min, 2);
+static SENSOR_DEVICE_ATTR_RW(temp3_auto_temp_max, temp_auto_temp_max, 2);
+static SENSOR_DEVICE_ATTR_RW(temp3_auto_temp_crit, temp_auto_temp_crit, 2);
+
+static struct attribute *lm85_attributes[] = {
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan3_min.dev_attr.attr,
+	&sensor_dev_attr_fan4_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm2_freq.dev_attr.attr,
+	&sensor_dev_attr_pwm3_freq.dev_attr.attr,
+
+	&sensor_dev_attr_in0_input.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in3_input.dev_attr.attr,
+	&sensor_dev_attr_in0_min.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in3_min.dev_attr.attr,
+	&sensor_dev_attr_in0_max.dev_attr.attr,
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in3_max.dev_attr.attr,
+	&sensor_dev_attr_in0_alarm.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+	&sensor_dev_attr_in3_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_fault.dev_attr.attr,
+	&sensor_dev_attr_temp3_fault.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1_auto_channels.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channels.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channels.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_pwm_min.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_pwm_min.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_pwm_min.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_auto_temp_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_temp_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_temp_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_auto_temp_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_temp_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_temp_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_auto_temp_crit.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_temp_crit.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_temp_crit.dev_attr.attr,
+
+	&dev_attr_vrm.attr,
+	&dev_attr_cpu0_vid.attr,
+	&dev_attr_alarms.attr,
+	NULL
+};
+
+static const struct attribute_group lm85_group = {
+	.attrs = lm85_attributes,
+};
+
+static struct attribute *lm85_attributes_minctl[] = {
+	&sensor_dev_attr_pwm1_auto_pwm_minctl.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_pwm_minctl.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_pwm_minctl.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group lm85_group_minctl = {
+	.attrs = lm85_attributes_minctl,
+};
+
+static struct attribute *lm85_attributes_temp_off[] = {
+	&sensor_dev_attr_temp1_auto_temp_off.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_temp_off.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_temp_off.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group lm85_group_temp_off = {
+	.attrs = lm85_attributes_temp_off,
+};
+
+static struct attribute *lm85_attributes_in4[] = {
+	&sensor_dev_attr_in4_input.dev_attr.attr,
+	&sensor_dev_attr_in4_min.dev_attr.attr,
+	&sensor_dev_attr_in4_max.dev_attr.attr,
+	&sensor_dev_attr_in4_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group lm85_group_in4 = {
+	.attrs = lm85_attributes_in4,
+};
+
+static struct attribute *lm85_attributes_in567[] = {
+	&sensor_dev_attr_in5_input.dev_attr.attr,
+	&sensor_dev_attr_in6_input.dev_attr.attr,
+	&sensor_dev_attr_in7_input.dev_attr.attr,
+	&sensor_dev_attr_in5_min.dev_attr.attr,
+	&sensor_dev_attr_in6_min.dev_attr.attr,
+	&sensor_dev_attr_in7_min.dev_attr.attr,
+	&sensor_dev_attr_in5_max.dev_attr.attr,
+	&sensor_dev_attr_in6_max.dev_attr.attr,
+	&sensor_dev_attr_in7_max.dev_attr.attr,
+	&sensor_dev_attr_in5_alarm.dev_attr.attr,
+	&sensor_dev_attr_in6_alarm.dev_attr.attr,
+	&sensor_dev_attr_in7_alarm.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group lm85_group_in567 = {
+	.attrs = lm85_attributes_in567,
+};
+
+static void lm85_init_client(struct i2c_client *client)
+{
+	int value;
+
+	/* Start monitoring if needed */
+	value = lm85_read_value(client, LM85_REG_CONFIG);
+	if (!(value & 0x01)) {
+		dev_info(&client->dev, "Starting monitoring\n");
+		lm85_write_value(client, LM85_REG_CONFIG, value | 0x01);
+	}
+
+	/* Warn about unusual configuration bits */
+	if (value & 0x02)
+		dev_warn(&client->dev, "Device configuration is locked\n");
+	if (!(value & 0x04))
+		dev_warn(&client->dev, "Device is not ready\n");
+}
+
+static int lm85_is_fake(struct i2c_client *client)
+{
+	/*
+	 * Differenciate between real LM96000 and Winbond WPCD377I. The latter
+	 * emulate the former except that it has no hardware monitoring function
+	 * so the readings are always 0.
+	 */
+	int i;
+	u8 in_temp, fan;
+
+	for (i = 0; i < 8; i++) {
+		in_temp = i2c_smbus_read_byte_data(client, 0x20 + i);
+		fan = i2c_smbus_read_byte_data(client, 0x28 + i);
+		if (in_temp != 0x00 || fan != 0xff)
+			return 0;
+	}
+
+	return 1;
+}
+
+/* Return 0 if detection is successful, -ENODEV otherwise */
+static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info)
+{
+	struct i2c_adapter *adapter = client->adapter;
+	int address = client->addr;
+	const char *type_name = NULL;
+	int company, verstep;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) {
+		/* We need to be able to do byte I/O */
+		return -ENODEV;
+	}
+
+	/* Determine the chip type */
+	company = lm85_read_value(client, LM85_REG_COMPANY);
+	verstep = lm85_read_value(client, LM85_REG_VERSTEP);
+
+	dev_dbg(&adapter->dev,
+		"Detecting device at 0x%02x with COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+		address, company, verstep);
+
+	if (company == LM85_COMPANY_NATIONAL) {
+		switch (verstep) {
+		case LM85_VERSTEP_LM85C:
+			type_name = "lm85c";
+			break;
+		case LM85_VERSTEP_LM85B:
+			type_name = "lm85b";
+			break;
+		case LM85_VERSTEP_LM96000_1:
+		case LM85_VERSTEP_LM96000_2:
+			/* Check for Winbond WPCD377I */
+			if (lm85_is_fake(client)) {
+				dev_dbg(&adapter->dev,
+					"Found Winbond WPCD377I, ignoring\n");
+				return -ENODEV;
+			}
+			type_name = "lm96000";
+			break;
+		}
+	} else if (company == LM85_COMPANY_ANALOG_DEV) {
+		switch (verstep) {
+		case LM85_VERSTEP_ADM1027:
+			type_name = "adm1027";
+			break;
+		case LM85_VERSTEP_ADT7463:
+		case LM85_VERSTEP_ADT7463C:
+			type_name = "adt7463";
+			break;
+		case LM85_VERSTEP_ADT7468_1:
+		case LM85_VERSTEP_ADT7468_2:
+			type_name = "adt7468";
+			break;
+		}
+	} else if (company == LM85_COMPANY_SMSC) {
+		switch (verstep) {
+		case LM85_VERSTEP_EMC6D100_A0:
+		case LM85_VERSTEP_EMC6D100_A1:
+			/* Note: we can't tell a '100 from a '101 */
+			type_name = "emc6d100";
+			break;
+		case LM85_VERSTEP_EMC6D102:
+			type_name = "emc6d102";
+			break;
+		case LM85_VERSTEP_EMC6D103_A0:
+		case LM85_VERSTEP_EMC6D103_A1:
+			type_name = "emc6d103";
+			break;
+		case LM85_VERSTEP_EMC6D103S:
+			type_name = "emc6d103s";
+			break;
+		}
+	}
+
+	if (!type_name)
+		return -ENODEV;
+
+	strscpy(info->type, type_name, I2C_NAME_SIZE);
+
+	return 0;
+}
+
+static const struct i2c_device_id lm85_id[];
+
+static int lm85_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct device *hwmon_dev;
+	struct lm85_data *data;
+	int idx = 0;
+
+	data = devm_kzalloc(dev, sizeof(struct lm85_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->client = client;
+	if (client->dev.of_node)
+		data->type = (enum chips)of_device_get_match_data(&client->dev);
+	else
+		data->type = i2c_match_id(lm85_id, client)->driver_data;
+	mutex_init(&data->update_lock);
+
+	/* Fill in the chip specific driver values */
+	switch (data->type) {
+	case adm1027:
+	case adt7463:
+	case adt7468:
+	case emc6d100:
+	case emc6d102:
+	case emc6d103:
+	case emc6d103s:
+		data->freq_map = adm1027_freq_map;
+		data->freq_map_size = ARRAY_SIZE(adm1027_freq_map);
+		break;
+	case lm96000:
+		data->freq_map = lm96000_freq_map;
+		data->freq_map_size = ARRAY_SIZE(lm96000_freq_map);
+		break;
+	default:
+		data->freq_map = lm85_freq_map;
+		data->freq_map_size = ARRAY_SIZE(lm85_freq_map);
+	}
+
+	/* Set the VRM version */
+	data->vrm = vid_which_vrm();
+
+	/* Initialize the LM85 chip */
+	lm85_init_client(client);
+
+	/* sysfs hooks */
+	data->groups[idx++] = &lm85_group;
+
+	/* minctl and temp_off exist on all chips except emc6d103s */
+	if (data->type != emc6d103s) {
+		data->groups[idx++] = &lm85_group_minctl;
+		data->groups[idx++] = &lm85_group_temp_off;
+	}
+
+	/*
+	 * The ADT7463/68 have an optional VRM 10 mode where pin 21 is used
+	 * as a sixth digital VID input rather than an analog input.
+	 */
+	if (data->type == adt7463 || data->type == adt7468) {
+		u8 vid = lm85_read_value(client, LM85_REG_VID);
+		if (vid & 0x80)
+			data->has_vid5 = true;
+	}
+
+	if (!data->has_vid5)
+		data->groups[idx++] = &lm85_group_in4;
+
+	/* The EMC6D100 has 3 additional voltage inputs */
+	if (data->type == emc6d100)
+		data->groups[idx++] = &lm85_group_in567;
+
+	hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+							   data, data->groups);
+	return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const struct i2c_device_id lm85_id[] = {
+	{ "adm1027", adm1027 },
+	{ "adt7463", adt7463 },
+	{ "adt7468", adt7468 },
+	{ "lm85", lm85 },
+	{ "lm85b", lm85 },
+	{ "lm85c", lm85 },
+	{ "lm96000", lm96000 },
+	{ "emc6d100", emc6d100 },
+	{ "emc6d101", emc6d100 },
+	{ "emc6d102", emc6d102 },
+	{ "emc6d103", emc6d103 },
+	{ "emc6d103s", emc6d103s },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, lm85_id);
+
+static const struct of_device_id __maybe_unused lm85_of_match[] = {
+	{
+		.compatible = "adi,adm1027",
+		.data = (void *)adm1027
+	},
+	{
+		.compatible = "adi,adt7463",
+		.data = (void *)adt7463
+	},
+	{
+		.compatible = "adi,adt7468",
+		.data = (void *)adt7468
+	},
+	{
+		.compatible = "national,lm85",
+		.data = (void *)lm85
+	},
+	{
+		.compatible = "national,lm85b",
+		.data = (void *)lm85
+	},
+	{
+		.compatible = "national,lm85c",
+		.data = (void *)lm85
+	},
+	{
+		.compatible = "ti,lm96000",
+		.data = (void *)lm96000
+	},
+	{
+		.compatible = "smsc,emc6d100",
+		.data = (void *)emc6d100
+	},
+	{
+		.compatible = "smsc,emc6d101",
+		.data = (void *)emc6d100
+	},
+	{
+		.compatible = "smsc,emc6d102",
+		.data = (void *)emc6d102
+	},
+	{
+		.compatible = "smsc,emc6d103",
+		.data = (void *)emc6d103
+	},
+	{
+		.compatible = "smsc,emc6d103s",
+		.data = (void *)emc6d103s
+	},
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lm85_of_match);
+
+static struct i2c_driver lm85_driver = {
+	.class		= I2C_CLASS_HWMON,
+	.driver = {
+		.name   = "lm85",
+		.of_match_table = of_match_ptr(lm85_of_match),
+	},
+	.probe_new	= lm85_probe,
+	.id_table	= lm85_id,
+	.detect		= lm85_detect,
+	.address_list	= normal_i2c,
+};
+
+module_i2c_driver(lm85_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, "
+	"Margit Schubert-While <margitsw@t-online.de>, "
+	"Justin Thiessen <jthiessen@penguincomputing.com>");
+MODULE_DESCRIPTION("LM85-B, LM85-C driver");