Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

24 files changed, 8622 insertions, 0 deletions

diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig
new file mode 100644
index 000000000..c30657e10
--- /dev/null
+++ b/drivers/iio/chemical/Kconfig
@@ -0,0 +1,205 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Chemical sensors
+#
+
+menu "Chemical Sensors"
+
+config ATLAS_PH_SENSOR
+	tristate "Atlas Scientific OEM SM sensors"
+	depends on I2C
+	select REGMAP_I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select IRQ_WORK
+	help
+	  Say Y here to build I2C interface support for the following
+	  Atlas Scientific OEM SM sensors:
+	    * pH SM sensor
+	    * EC SM sensor
+	    * ORP SM sensor
+
+	  To compile this driver as module, choose M here: the
+	  module will be called atlas-ph-sensor.
+
+config ATLAS_EZO_SENSOR
+	tristate "Atlas Scientific EZO sensors"
+	depends on I2C
+	help
+	  Say Y here to build I2C interface support for the following
+	  Atlas Scientific EZO sensors
+	    * CO2 EZO Sensor
+
+	  To compile this driver as module, choose M here: the
+	  module will be called atlas-ezo-sensor.
+
+config BME680
+	tristate "Bosch Sensortec BME680 sensor driver"
+	depends on (I2C || SPI)
+	select REGMAP
+	select BME680_I2C if I2C
+	select BME680_SPI if SPI
+	help
+	  Say yes here to build support for Bosch Sensortec BME680 sensor with
+	  temperature, pressure, humidity and gas sensing capability.
+
+	  This driver can also be built as a module. If so, the module for I2C
+	  would be called bme680_i2c and bme680_spi for SPI support.
+
+config BME680_I2C
+	tristate
+	depends on I2C && BME680
+	select REGMAP_I2C
+
+config BME680_SPI
+	tristate
+	depends on SPI && BME680
+	select REGMAP_SPI
+
+config CCS811
+	tristate "AMS CCS811 VOC sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here to build I2C interface support for the AMS
+	  CCS811 VOC (Volatile Organic Compounds) sensor
+
+config IAQCORE
+	tristate "AMS iAQ-Core VOC sensors"
+	depends on I2C
+	help
+	  Say Y here to build I2C interface support for the AMS
+	  iAQ-Core Continuous/Pulsed VOC (Volatile Organic Compounds)
+	  sensors
+
+config PMS7003
+	tristate "Plantower PMS7003 particulate matter sensor"
+	depends on SERIAL_DEV_BUS
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here to build support for the Plantower PMS7003 particulate
+	  matter sensor.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called pms7003.
+
+config SCD30_CORE
+	tristate "SCD30 carbon dioxide sensor driver"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say Y here to build support for the Sensirion SCD30 sensor with carbon
+	  dioxide, relative humidity and temperature sensing capabilities.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called scd30_core.
+
+config SCD30_I2C
+	tristate "SCD30 carbon dioxide sensor I2C driver"
+	depends on SCD30_CORE && I2C
+	select CRC8
+	help
+	  Say Y here to build support for the Sensirion SCD30 I2C interface
+	  driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called scd30_i2c.
+
+config SCD30_SERIAL
+	tristate "SCD30 carbon dioxide sensor serial driver"
+	depends on SCD30_CORE && SERIAL_DEV_BUS
+	select CRC16
+	help
+	  Say Y here to build support for the Sensirion SCD30 serial interface
+	  driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called scd30_serial.
+
+config SCD4X
+	tristate "SCD4X carbon dioxide sensor driver"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	depends on I2C
+	select CRC8
+	help
+	  Say Y here to build support for the Sensirion SCD4X sensor with carbon
+	  dioxide, relative humidity and temperature sensing capabilities.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called scd4x.
+
+config SENSIRION_SGP30
+	tristate "Sensirion SGPxx gas sensors"
+	depends on I2C
+	select CRC8
+	help
+	  Say Y here to build I2C interface support for the following
+	  Sensirion SGP gas sensors:
+	    * SGP30 gas sensor
+	    * SGPC3 low power gas sensor
+
+	  To compile this driver as module, choose M here: the
+	  module will be called sgp30.
+
+config SENSIRION_SGP40
+	tristate "Sensirion SGP40 gas sensor"
+	depends on I2C
+	select CRC8
+	help
+	  Say Y here to build I2C interface to support Sensirion SGP40 gas
+	  sensor
+
+	  To compile this driver as module, choose M here: the
+	  module will be called sgp40.
+
+config SPS30
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+
+config SPS30_I2C
+	tristate "SPS30 particulate matter sensor I2C driver"
+	depends on I2C
+	select SPS30
+	select CRC8
+	help
+	  Say Y here to build support for the Sensirion SPS30 I2C interface
+	  driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called sps30_i2c.
+
+config SPS30_SERIAL
+	tristate "SPS30 particulate matter sensor serial driver"
+	depends on SERIAL_DEV_BUS
+	select SPS30
+	help
+	  Say Y here to build support for the Sensirion SPS30 serial interface
+	  driver.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called sps30_serial.
+
+config SENSEAIR_SUNRISE_CO2
+	tristate "Senseair Sunrise 006-0-0007 CO2 sensor"
+	depends on I2C
+	select REGMAP_I2C
+	help
+	  Say yes here to build support for Senseair Sunrise 006-0-0007 CO2
+	  sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sunrise_co2.
+
+config VZ89X
+	tristate "SGX Sensortech MiCS VZ89X VOC sensor"
+	depends on I2C
+	help
+	  Say Y here to build I2C interface support for the SGX
+	  Sensortech MiCS VZ89X VOC (Volatile Organic Compounds)
+	  sensors
+
+endmenu
diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile
new file mode 100644
index 000000000..a11e777a7
--- /dev/null
+++ b/drivers/iio/chemical/Makefile
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Makefile for IIO chemical sensors
+#
+
+# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_ATLAS_PH_SENSOR)	+= atlas-sensor.o
+obj-$(CONFIG_ATLAS_EZO_SENSOR)	+= atlas-ezo-sensor.o
+obj-$(CONFIG_BME680) += bme680_core.o
+obj-$(CONFIG_BME680_I2C) += bme680_i2c.o
+obj-$(CONFIG_BME680_SPI) += bme680_spi.o
+obj-$(CONFIG_CCS811)		+= ccs811.o
+obj-$(CONFIG_IAQCORE)		+= ams-iaq-core.o
+obj-$(CONFIG_PMS7003) += pms7003.o
+obj-$(CONFIG_SCD30_CORE) += scd30_core.o
+obj-$(CONFIG_SCD30_I2C) += scd30_i2c.o
+obj-$(CONFIG_SCD30_SERIAL) += scd30_serial.o
+obj-$(CONFIG_SCD4X) += scd4x.o
+obj-$(CONFIG_SENSEAIR_SUNRISE_CO2) += sunrise_co2.o
+obj-$(CONFIG_SENSIRION_SGP30)	+= sgp30.o
+obj-$(CONFIG_SENSIRION_SGP40)	+= sgp40.o
+obj-$(CONFIG_SPS30) += sps30.o
+obj-$(CONFIG_SPS30_I2C) += sps30_i2c.o
+obj-$(CONFIG_SPS30_SERIAL) += sps30_serial.o
+obj-$(CONFIG_VZ89X)		+= vz89x.o
diff --git a/drivers/iio/chemical/ams-iaq-core.c b/drivers/iio/chemical/ams-iaq-core.c
new file mode 100644
index 000000000..97be3669c
--- /dev/null
+++ b/drivers/iio/chemical/ams-iaq-core.c
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * ams-iaq-core.c - Support for AMS iAQ-Core VOC sensors
+ *
+ * Copyright (C) 2015, 2018
+ * Author: Matt Ranostay <matt.ranostay@konsulko.com>
+ */
+
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+
+#define AMS_IAQCORE_DATA_SIZE		9
+
+#define AMS_IAQCORE_VOC_CO2_IDX		0
+#define AMS_IAQCORE_VOC_RESISTANCE_IDX	1
+#define AMS_IAQCORE_VOC_TVOC_IDX	2
+
+struct ams_iaqcore_reading {
+	__be16 co2_ppm;
+	u8 status;
+	__be32 resistance;
+	__be16 voc_ppb;
+} __attribute__((__packed__));
+
+struct ams_iaqcore_data {
+	struct i2c_client *client;
+	struct mutex lock;
+	unsigned long last_update;
+
+	struct ams_iaqcore_reading buffer;
+};
+
+static const struct iio_chan_spec ams_iaqcore_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_CO2,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = AMS_IAQCORE_VOC_CO2_IDX,
+	},
+	{
+		.type = IIO_RESISTANCE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = AMS_IAQCORE_VOC_RESISTANCE_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_VOC,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = AMS_IAQCORE_VOC_TVOC_IDX,
+	},
+};
+
+static int ams_iaqcore_read_measurement(struct ams_iaqcore_data *data)
+{
+	struct i2c_client *client = data->client;
+	int ret;
+
+	struct i2c_msg msg = {
+		.addr = client->addr,
+		.flags = client->flags | I2C_M_RD,
+		.len = AMS_IAQCORE_DATA_SIZE,
+		.buf = (char *) &data->buffer,
+	};
+
+	ret = i2c_transfer(client->adapter, &msg, 1);
+
+	return (ret == AMS_IAQCORE_DATA_SIZE) ? 0 : ret;
+}
+
+static int ams_iaqcore_get_measurement(struct ams_iaqcore_data *data)
+{
+	int ret;
+
+	/* sensor can only be polled once a second max per datasheet */
+	if (!time_after(jiffies, data->last_update + HZ))
+		return 0;
+
+	ret = ams_iaqcore_read_measurement(data);
+	if (ret < 0)
+		return ret;
+
+	data->last_update = jiffies;
+
+	return 0;
+}
+
+static int ams_iaqcore_read_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan, int *val,
+				int *val2, long mask)
+{
+	struct ams_iaqcore_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (mask != IIO_CHAN_INFO_PROCESSED)
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+	ret = ams_iaqcore_get_measurement(data);
+
+	if (ret)
+		goto err_out;
+
+	switch (chan->address) {
+	case AMS_IAQCORE_VOC_CO2_IDX:
+		*val = 0;
+		*val2 = be16_to_cpu(data->buffer.co2_ppm);
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case AMS_IAQCORE_VOC_RESISTANCE_IDX:
+		*val = be32_to_cpu(data->buffer.resistance);
+		ret = IIO_VAL_INT;
+		break;
+	case AMS_IAQCORE_VOC_TVOC_IDX:
+		*val = 0;
+		*val2 = be16_to_cpu(data->buffer.voc_ppb);
+		ret = IIO_VAL_INT_PLUS_NANO;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+err_out:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static const struct iio_info ams_iaqcore_info = {
+	.read_raw	= ams_iaqcore_read_raw,
+};
+
+static int ams_iaqcore_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct ams_iaqcore_data *data;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	/* so initial reading will complete */
+	data->last_update = jiffies - HZ;
+	mutex_init(&data->lock);
+
+	indio_dev->info = &ams_iaqcore_info;
+	indio_dev->name = dev_name(&client->dev);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	indio_dev->channels = ams_iaqcore_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ams_iaqcore_channels);
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id ams_iaqcore_id[] = {
+	{ "ams-iaq-core", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ams_iaqcore_id);
+
+static const struct of_device_id ams_iaqcore_dt_ids[] = {
+	{ .compatible = "ams,iaq-core" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ams_iaqcore_dt_ids);
+
+static struct i2c_driver ams_iaqcore_driver = {
+	.driver = {
+		.name	= "ams-iaq-core",
+		.of_match_table = ams_iaqcore_dt_ids,
+	},
+	.probe = ams_iaqcore_probe,
+	.id_table = ams_iaqcore_id,
+};
+module_i2c_driver(ams_iaqcore_driver);
+
+MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
+MODULE_DESCRIPTION("AMS iAQ-Core VOC sensors");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/atlas-ezo-sensor.c b/drivers/iio/chemical/atlas-ezo-sensor.c
new file mode 100644
index 000000000..bbcf5a59c
--- /dev/null
+++ b/drivers/iio/chemical/atlas-ezo-sensor.c
@@ -0,0 +1,248 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * atlas-ezo-sensor.c - Support for Atlas Scientific EZO sensors
+ *
+ * Copyright (C) 2020 Konsulko Group
+ * Author: Matt Ranostay <matt.ranostay@konsulko.com>
+ */
+
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/property.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+
+#include <linux/iio/iio.h>
+
+#define ATLAS_EZO_DRV_NAME		"atlas-ezo-sensor"
+#define ATLAS_INT_TIME_IN_MS		950
+#define ATLAS_INT_HUM_TIME_IN_MS	350
+
+enum {
+	ATLAS_CO2_EZO,
+	ATLAS_O2_EZO,
+	ATLAS_HUM_EZO,
+};
+
+struct atlas_ezo_device {
+	const struct iio_chan_spec *channels;
+	int num_channels;
+	int delay;
+};
+
+struct atlas_ezo_data {
+	struct i2c_client *client;
+	const struct atlas_ezo_device *chip;
+
+	/* lock to avoid multiple concurrent read calls */
+	struct mutex lock;
+
+	u8 buffer[8];
+};
+
+#define ATLAS_CONCENTRATION_CHANNEL(_modifier) \
+	{ \
+		.type = IIO_CONCENTRATION, \
+		.modified = 1,\
+		.channel2 = _modifier, \
+		.info_mask_separate = \
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \
+		.scan_index = 0, \
+		.scan_type =  { \
+			.sign = 'u', \
+			.realbits = 32, \
+			.storagebits = 32, \
+			.endianness = IIO_CPU, \
+		}, \
+	}
+
+static const struct iio_chan_spec atlas_co2_ezo_channels[] = {
+	ATLAS_CONCENTRATION_CHANNEL(IIO_MOD_CO2),
+};
+
+static const struct iio_chan_spec atlas_o2_ezo_channels[] = {
+	ATLAS_CONCENTRATION_CHANNEL(IIO_MOD_O2),
+};
+
+static const struct iio_chan_spec atlas_hum_ezo_channels[] = {
+	{
+		.type = IIO_HUMIDITYRELATIVE,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type =  {
+			.sign = 'u',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_CPU,
+		},
+	},
+};
+
+static struct atlas_ezo_device atlas_ezo_devices[] = {
+	[ATLAS_CO2_EZO] = {
+		.channels = atlas_co2_ezo_channels,
+		.num_channels = 1,
+		.delay = ATLAS_INT_TIME_IN_MS,
+	},
+	[ATLAS_O2_EZO] = {
+		.channels = atlas_o2_ezo_channels,
+		.num_channels = 1,
+		.delay = ATLAS_INT_TIME_IN_MS,
+	},
+	[ATLAS_HUM_EZO] = {
+		.channels = atlas_hum_ezo_channels,
+		.num_channels = 1,
+		.delay = ATLAS_INT_HUM_TIME_IN_MS,
+	},
+};
+
+static void atlas_ezo_sanitize(char *buf)
+{
+	char *ptr = strchr(buf, '.');
+
+	if (!ptr)
+		return;
+
+	memmove(ptr, ptr + 1, strlen(ptr));
+}
+
+static int atlas_ezo_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct atlas_ezo_data *data = iio_priv(indio_dev);
+	struct i2c_client *client = data->client;
+
+	if (chan->type != IIO_CONCENTRATION)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW: {
+		int ret;
+		long tmp;
+
+		mutex_lock(&data->lock);
+
+		tmp = i2c_smbus_write_byte(client, 'R');
+
+		if (tmp < 0) {
+			mutex_unlock(&data->lock);
+			return tmp;
+		}
+
+		msleep(data->chip->delay);
+
+		tmp = i2c_master_recv(client, data->buffer, sizeof(data->buffer));
+
+		if (tmp < 0 || data->buffer[0] != 1) {
+			mutex_unlock(&data->lock);
+			return -EBUSY;
+		}
+
+		/* removing floating point for fixed number representation */
+		atlas_ezo_sanitize(data->buffer + 2);
+
+		ret = kstrtol(data->buffer + 1, 10, &tmp);
+
+		*val = tmp;
+
+		mutex_unlock(&data->lock);
+
+		return ret ? ret : IIO_VAL_INT;
+	}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_HUMIDITYRELATIVE:
+			*val = 10;
+			return IIO_VAL_INT;
+		case IIO_CONCENTRATION:
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		/* IIO_CONCENTRATION modifiers */
+		switch (chan->channel2) {
+		case IIO_MOD_CO2:
+			*val = 0;
+			*val2 = 100; /* 0.0001 */
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_MOD_O2:
+			*val = 100;
+			return IIO_VAL_INT;
+		}
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct iio_info atlas_info = {
+	.read_raw = atlas_ezo_read_raw,
+};
+
+static const struct i2c_device_id atlas_ezo_id[] = {
+	{ "atlas-co2-ezo", (kernel_ulong_t)&atlas_ezo_devices[ATLAS_CO2_EZO] },
+	{ "atlas-o2-ezo", (kernel_ulong_t)&atlas_ezo_devices[ATLAS_O2_EZO] },
+	{ "atlas-hum-ezo", (kernel_ulong_t)&atlas_ezo_devices[ATLAS_HUM_EZO] },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, atlas_ezo_id);
+
+static const struct of_device_id atlas_ezo_dt_ids[] = {
+	{ .compatible = "atlas,co2-ezo", .data = &atlas_ezo_devices[ATLAS_CO2_EZO], },
+	{ .compatible = "atlas,o2-ezo", .data = &atlas_ezo_devices[ATLAS_O2_EZO], },
+	{ .compatible = "atlas,hum-ezo", .data = &atlas_ezo_devices[ATLAS_HUM_EZO], },
+	{}
+};
+MODULE_DEVICE_TABLE(of, atlas_ezo_dt_ids);
+
+static int atlas_ezo_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	const struct atlas_ezo_device *chip;
+	struct atlas_ezo_data *data;
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	if (dev_fwnode(&client->dev))
+		chip = device_get_match_data(&client->dev);
+	else
+		chip = (const struct atlas_ezo_device *)id->driver_data;
+	if (!chip)
+		return -EINVAL;
+
+	indio_dev->info = &atlas_info;
+	indio_dev->name = ATLAS_EZO_DRV_NAME;
+	indio_dev->channels = chip->channels;
+	indio_dev->num_channels = chip->num_channels;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	data->chip = chip;
+	mutex_init(&data->lock);
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+};
+
+static struct i2c_driver atlas_ezo_driver = {
+	.driver = {
+		.name	= ATLAS_EZO_DRV_NAME,
+		.of_match_table	= atlas_ezo_dt_ids,
+	},
+	.probe		= atlas_ezo_probe,
+	.id_table	= atlas_ezo_id,
+};
+module_i2c_driver(atlas_ezo_driver);
+
+MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
+MODULE_DESCRIPTION("Atlas Scientific EZO sensors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/chemical/atlas-sensor.c b/drivers/iio/chemical/atlas-sensor.c
new file mode 100644
index 000000000..7cac77a93
--- /dev/null
+++ b/drivers/iio/chemical/atlas-sensor.c
@@ -0,0 +1,778 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * atlas-sensor.c - Support for Atlas Scientific OEM SM sensors
+ *
+ * Copyright (C) 2015-2019 Konsulko Group
+ * Author: Matt Ranostay <matt.ranostay@konsulko.com>
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/irq_work.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/pm_runtime.h>
+
+#define ATLAS_REGMAP_NAME	"atlas_regmap"
+#define ATLAS_DRV_NAME		"atlas"
+
+#define ATLAS_REG_DEV_TYPE		0x00
+#define ATLAS_REG_DEV_VERSION		0x01
+
+#define ATLAS_REG_INT_CONTROL		0x04
+#define ATLAS_REG_INT_CONTROL_EN	BIT(3)
+
+#define ATLAS_REG_PWR_CONTROL		0x06
+
+#define ATLAS_REG_PH_CALIB_STATUS	0x0d
+#define ATLAS_REG_PH_CALIB_STATUS_MASK	0x07
+#define ATLAS_REG_PH_CALIB_STATUS_LOW	BIT(0)
+#define ATLAS_REG_PH_CALIB_STATUS_MID	BIT(1)
+#define ATLAS_REG_PH_CALIB_STATUS_HIGH	BIT(2)
+
+#define ATLAS_REG_EC_CALIB_STATUS		0x0f
+#define ATLAS_REG_EC_CALIB_STATUS_MASK		0x0f
+#define ATLAS_REG_EC_CALIB_STATUS_DRY		BIT(0)
+#define ATLAS_REG_EC_CALIB_STATUS_SINGLE	BIT(1)
+#define ATLAS_REG_EC_CALIB_STATUS_LOW		BIT(2)
+#define ATLAS_REG_EC_CALIB_STATUS_HIGH		BIT(3)
+
+#define ATLAS_REG_DO_CALIB_STATUS		0x09
+#define ATLAS_REG_DO_CALIB_STATUS_MASK		0x03
+#define ATLAS_REG_DO_CALIB_STATUS_PRESSURE	BIT(0)
+#define ATLAS_REG_DO_CALIB_STATUS_DO		BIT(1)
+
+#define ATLAS_REG_RTD_DATA		0x0e
+
+#define ATLAS_REG_PH_TEMP_DATA		0x0e
+#define ATLAS_REG_PH_DATA		0x16
+
+#define ATLAS_REG_EC_PROBE		0x08
+#define ATLAS_REG_EC_TEMP_DATA		0x10
+#define ATLAS_REG_EC_DATA		0x18
+#define ATLAS_REG_TDS_DATA		0x1c
+#define ATLAS_REG_PSS_DATA		0x20
+
+#define ATLAS_REG_ORP_CALIB_STATUS	0x0d
+#define ATLAS_REG_ORP_DATA		0x0e
+
+#define ATLAS_REG_DO_TEMP_DATA		0x12
+#define ATLAS_REG_DO_DATA		0x22
+
+#define ATLAS_PH_INT_TIME_IN_MS		450
+#define ATLAS_EC_INT_TIME_IN_MS		650
+#define ATLAS_ORP_INT_TIME_IN_MS	450
+#define ATLAS_DO_INT_TIME_IN_MS		450
+#define ATLAS_RTD_INT_TIME_IN_MS	450
+
+enum {
+	ATLAS_PH_SM,
+	ATLAS_EC_SM,
+	ATLAS_ORP_SM,
+	ATLAS_DO_SM,
+	ATLAS_RTD_SM,
+};
+
+struct atlas_data {
+	struct i2c_client *client;
+	struct iio_trigger *trig;
+	struct atlas_device *chip;
+	struct regmap *regmap;
+	struct irq_work work;
+	unsigned int interrupt_enabled;
+	/* 96-bit data + 32-bit pad + 64-bit timestamp */
+	__be32 buffer[6] __aligned(8);
+};
+
+static const struct regmap_config atlas_regmap_config = {
+	.name = ATLAS_REGMAP_NAME,
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int atlas_buffer_num_channels(const struct iio_chan_spec *spec)
+{
+	int idx = 0;
+
+	for (; spec->type != IIO_TIMESTAMP; spec++)
+		idx++;
+
+	return idx;
+};
+
+static const struct iio_chan_spec atlas_ph_channels[] = {
+	{
+		.type = IIO_PH,
+		.address = ATLAS_REG_PH_DATA,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+	{
+		.type = IIO_TEMP,
+		.address = ATLAS_REG_PH_TEMP_DATA,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.output = 1,
+		.scan_index = -1
+	},
+};
+
+#define ATLAS_CONCENTRATION_CHANNEL(_idx, _addr) \
+	{\
+		.type = IIO_CONCENTRATION, \
+		.indexed = 1, \
+		.channel = _idx, \
+		.address = _addr, \
+		.info_mask_separate = \
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), \
+		.scan_index = _idx + 1, \
+		.scan_type = { \
+			.sign = 'u', \
+			.realbits = 32, \
+			.storagebits = 32, \
+			.endianness = IIO_BE, \
+		}, \
+	}
+
+static const struct iio_chan_spec atlas_ec_channels[] = {
+	{
+		.type = IIO_ELECTRICALCONDUCTIVITY,
+		.address = ATLAS_REG_EC_DATA,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_BE,
+		},
+	},
+	ATLAS_CONCENTRATION_CHANNEL(0, ATLAS_REG_TDS_DATA),
+	ATLAS_CONCENTRATION_CHANNEL(1, ATLAS_REG_PSS_DATA),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+	{
+		.type = IIO_TEMP,
+		.address = ATLAS_REG_EC_TEMP_DATA,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.output = 1,
+		.scan_index = -1
+	},
+};
+
+static const struct iio_chan_spec atlas_orp_channels[] = {
+	{
+		.type = IIO_VOLTAGE,
+		.address = ATLAS_REG_ORP_DATA,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct iio_chan_spec atlas_do_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.address = ATLAS_REG_DO_DATA,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+	{
+		.type = IIO_TEMP,
+		.address = ATLAS_REG_DO_TEMP_DATA,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.output = 1,
+		.scan_index = -1
+	},
+};
+
+static const struct iio_chan_spec atlas_rtd_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.address = ATLAS_REG_RTD_DATA,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static int atlas_check_ph_calibration(struct atlas_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(data->regmap, ATLAS_REG_PH_CALIB_STATUS, &val);
+	if (ret)
+		return ret;
+
+	if (!(val & ATLAS_REG_PH_CALIB_STATUS_MASK)) {
+		dev_warn(dev, "device has not been calibrated\n");
+		return 0;
+	}
+
+	if (!(val & ATLAS_REG_PH_CALIB_STATUS_LOW))
+		dev_warn(dev, "device missing low point calibration\n");
+
+	if (!(val & ATLAS_REG_PH_CALIB_STATUS_MID))
+		dev_warn(dev, "device missing mid point calibration\n");
+
+	if (!(val & ATLAS_REG_PH_CALIB_STATUS_HIGH))
+		dev_warn(dev, "device missing high point calibration\n");
+
+	return 0;
+}
+
+static int atlas_check_ec_calibration(struct atlas_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	unsigned int val;
+	__be16	rval;
+
+	ret = regmap_bulk_read(data->regmap, ATLAS_REG_EC_PROBE, &rval, 2);
+	if (ret)
+		return ret;
+
+	val = be16_to_cpu(rval);
+	dev_info(dev, "probe set to K = %d.%.2d", val / 100, val % 100);
+
+	ret = regmap_read(data->regmap, ATLAS_REG_EC_CALIB_STATUS, &val);
+	if (ret)
+		return ret;
+
+	if (!(val & ATLAS_REG_EC_CALIB_STATUS_MASK)) {
+		dev_warn(dev, "device has not been calibrated\n");
+		return 0;
+	}
+
+	if (!(val & ATLAS_REG_EC_CALIB_STATUS_DRY))
+		dev_warn(dev, "device missing dry point calibration\n");
+
+	if (val & ATLAS_REG_EC_CALIB_STATUS_SINGLE) {
+		dev_warn(dev, "device using single point calibration\n");
+	} else {
+		if (!(val & ATLAS_REG_EC_CALIB_STATUS_LOW))
+			dev_warn(dev, "device missing low point calibration\n");
+
+		if (!(val & ATLAS_REG_EC_CALIB_STATUS_HIGH))
+			dev_warn(dev, "device missing high point calibration\n");
+	}
+
+	return 0;
+}
+
+static int atlas_check_orp_calibration(struct atlas_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(data->regmap, ATLAS_REG_ORP_CALIB_STATUS, &val);
+	if (ret)
+		return ret;
+
+	if (!val)
+		dev_warn(dev, "device has not been calibrated\n");
+
+	return 0;
+}
+
+static int atlas_check_do_calibration(struct atlas_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(data->regmap, ATLAS_REG_DO_CALIB_STATUS, &val);
+	if (ret)
+		return ret;
+
+	if (!(val & ATLAS_REG_DO_CALIB_STATUS_MASK)) {
+		dev_warn(dev, "device has not been calibrated\n");
+		return 0;
+	}
+
+	if (!(val & ATLAS_REG_DO_CALIB_STATUS_PRESSURE))
+		dev_warn(dev, "device missing atmospheric pressure calibration\n");
+
+	if (!(val & ATLAS_REG_DO_CALIB_STATUS_DO))
+		dev_warn(dev, "device missing dissolved oxygen calibration\n");
+
+	return 0;
+}
+
+struct atlas_device {
+	const struct iio_chan_spec *channels;
+	int num_channels;
+	int data_reg;
+
+	int (*calibration)(struct atlas_data *data);
+	int delay;
+};
+
+static struct atlas_device atlas_devices[] = {
+	[ATLAS_PH_SM] = {
+				.channels = atlas_ph_channels,
+				.num_channels = 3,
+				.data_reg = ATLAS_REG_PH_DATA,
+				.calibration = &atlas_check_ph_calibration,
+				.delay = ATLAS_PH_INT_TIME_IN_MS,
+	},
+	[ATLAS_EC_SM] = {
+				.channels = atlas_ec_channels,
+				.num_channels = 5,
+				.data_reg = ATLAS_REG_EC_DATA,
+				.calibration = &atlas_check_ec_calibration,
+				.delay = ATLAS_EC_INT_TIME_IN_MS,
+	},
+	[ATLAS_ORP_SM] = {
+				.channels = atlas_orp_channels,
+				.num_channels = 2,
+				.data_reg = ATLAS_REG_ORP_DATA,
+				.calibration = &atlas_check_orp_calibration,
+				.delay = ATLAS_ORP_INT_TIME_IN_MS,
+	},
+	[ATLAS_DO_SM] = {
+				.channels = atlas_do_channels,
+				.num_channels = 3,
+				.data_reg = ATLAS_REG_DO_DATA,
+				.calibration = &atlas_check_do_calibration,
+				.delay = ATLAS_DO_INT_TIME_IN_MS,
+	},
+	[ATLAS_RTD_SM] = {
+				.channels = atlas_rtd_channels,
+				.num_channels = 2,
+				.data_reg = ATLAS_REG_RTD_DATA,
+				.delay = ATLAS_RTD_INT_TIME_IN_MS,
+	},
+};
+
+static int atlas_set_powermode(struct atlas_data *data, int on)
+{
+	return regmap_write(data->regmap, ATLAS_REG_PWR_CONTROL, on);
+}
+
+static int atlas_set_interrupt(struct atlas_data *data, bool state)
+{
+	if (!data->interrupt_enabled)
+		return 0;
+
+	return regmap_update_bits(data->regmap, ATLAS_REG_INT_CONTROL,
+				  ATLAS_REG_INT_CONTROL_EN,
+				  state ? ATLAS_REG_INT_CONTROL_EN : 0);
+}
+
+static int atlas_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct atlas_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(&data->client->dev);
+	if (ret)
+		return ret;
+
+	return atlas_set_interrupt(data, true);
+}
+
+static int atlas_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct atlas_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = atlas_set_interrupt(data, false);
+	if (ret)
+		return ret;
+
+	pm_runtime_mark_last_busy(&data->client->dev);
+	ret = pm_runtime_put_autosuspend(&data->client->dev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops atlas_buffer_setup_ops = {
+	.postenable = atlas_buffer_postenable,
+	.predisable = atlas_buffer_predisable,
+};
+
+static void atlas_work_handler(struct irq_work *work)
+{
+	struct atlas_data *data = container_of(work, struct atlas_data, work);
+
+	iio_trigger_poll(data->trig);
+}
+
+static irqreturn_t atlas_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct atlas_data *data = iio_priv(indio_dev);
+	int channels = atlas_buffer_num_channels(data->chip->channels);
+	int ret;
+
+	ret = regmap_bulk_read(data->regmap, data->chip->data_reg,
+			      &data->buffer, sizeof(__be32) * channels);
+
+	if (!ret)
+		iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+				iio_get_time_ns(indio_dev));
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t atlas_interrupt_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct atlas_data *data = iio_priv(indio_dev);
+
+	irq_work_queue(&data->work);
+
+	return IRQ_HANDLED;
+}
+
+static int atlas_read_measurement(struct atlas_data *data, int reg, __be32 *val)
+{
+	struct device *dev = &data->client->dev;
+	int suspended = pm_runtime_suspended(dev);
+	int ret;
+
+	ret = pm_runtime_resume_and_get(dev);
+	if (ret)
+		return ret;
+
+	if (suspended)
+		msleep(data->chip->delay);
+
+	ret = regmap_bulk_read(data->regmap, reg, val, sizeof(*val));
+
+	pm_runtime_mark_last_busy(dev);
+	pm_runtime_put_autosuspend(dev);
+
+	return ret;
+}
+
+static int atlas_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct atlas_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+	case IIO_CHAN_INFO_RAW: {
+		int ret;
+		__be32 reg;
+
+		switch (chan->type) {
+		case IIO_TEMP:
+			ret = regmap_bulk_read(data->regmap, chan->address,
+					       &reg, sizeof(reg));
+			break;
+		case IIO_PH:
+		case IIO_CONCENTRATION:
+		case IIO_ELECTRICALCONDUCTIVITY:
+		case IIO_VOLTAGE:
+			ret = iio_device_claim_direct_mode(indio_dev);
+			if (ret)
+				return ret;
+
+			ret = atlas_read_measurement(data, chan->address, &reg);
+
+			iio_device_release_direct_mode(indio_dev);
+			break;
+		default:
+			ret = -EINVAL;
+		}
+
+		if (!ret) {
+			*val = be32_to_cpu(reg);
+			ret = IIO_VAL_INT;
+		}
+		return ret;
+	}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = 10;
+			return IIO_VAL_INT;
+		case IIO_PH:
+			*val = 1; /* 0.001 */
+			*val2 = 1000;
+			break;
+		case IIO_ELECTRICALCONDUCTIVITY:
+			*val = 1; /* 0.00001 */
+			*val2 = 100000;
+			break;
+		case IIO_CONCENTRATION:
+			*val = 0; /* 0.000000001 */
+			*val2 = 1000;
+			return IIO_VAL_INT_PLUS_NANO;
+		case IIO_VOLTAGE:
+			*val = 1; /* 0.1 */
+			*val2 = 10;
+			break;
+		default:
+			return -EINVAL;
+		}
+		return IIO_VAL_FRACTIONAL;
+	}
+
+	return -EINVAL;
+}
+
+static int atlas_write_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int val, int val2, long mask)
+{
+	struct atlas_data *data = iio_priv(indio_dev);
+	__be32 reg = cpu_to_be32(val / 10);
+
+	if (val2 != 0 || val < 0 || val > 20000)
+		return -EINVAL;
+
+	if (mask != IIO_CHAN_INFO_RAW || chan->type != IIO_TEMP)
+		return -EINVAL;
+
+	return regmap_bulk_write(data->regmap, chan->address,
+				 &reg, sizeof(reg));
+}
+
+static const struct iio_info atlas_info = {
+	.read_raw = atlas_read_raw,
+	.write_raw = atlas_write_raw,
+};
+
+static const struct i2c_device_id atlas_id[] = {
+	{ "atlas-ph-sm", ATLAS_PH_SM },
+	{ "atlas-ec-sm", ATLAS_EC_SM },
+	{ "atlas-orp-sm", ATLAS_ORP_SM },
+	{ "atlas-do-sm", ATLAS_DO_SM },
+	{ "atlas-rtd-sm", ATLAS_RTD_SM },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, atlas_id);
+
+static const struct of_device_id atlas_dt_ids[] = {
+	{ .compatible = "atlas,ph-sm", .data = (void *)ATLAS_PH_SM, },
+	{ .compatible = "atlas,ec-sm", .data = (void *)ATLAS_EC_SM, },
+	{ .compatible = "atlas,orp-sm", .data = (void *)ATLAS_ORP_SM, },
+	{ .compatible = "atlas,do-sm", .data = (void *)ATLAS_DO_SM, },
+	{ .compatible = "atlas,rtd-sm", .data = (void *)ATLAS_RTD_SM, },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, atlas_dt_ids);
+
+static int atlas_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct atlas_data *data;
+	struct atlas_device *chip;
+	struct iio_trigger *trig;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	if (!dev_fwnode(&client->dev))
+		chip = &atlas_devices[id->driver_data];
+	else
+		chip = &atlas_devices[(unsigned long)device_get_match_data(&client->dev)];
+
+	indio_dev->info = &atlas_info;
+	indio_dev->name = ATLAS_DRV_NAME;
+	indio_dev->channels = chip->channels;
+	indio_dev->num_channels = chip->num_channels;
+	indio_dev->modes = INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE;
+
+	trig = devm_iio_trigger_alloc(&client->dev, "%s-dev%d",
+				      indio_dev->name, iio_device_id(indio_dev));
+
+	if (!trig)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	data->trig = trig;
+	data->chip = chip;
+	iio_trigger_set_drvdata(trig, indio_dev);
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data->regmap = devm_regmap_init_i2c(client, &atlas_regmap_config);
+	if (IS_ERR(data->regmap)) {
+		dev_err(&client->dev, "regmap initialization failed\n");
+		return PTR_ERR(data->regmap);
+	}
+
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret)
+		return ret;
+
+	ret = chip->calibration(data);
+	if (ret)
+		return ret;
+
+	ret = iio_trigger_register(trig);
+	if (ret) {
+		dev_err(&client->dev, "failed to register trigger\n");
+		return ret;
+	}
+
+	ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		&atlas_trigger_handler, &atlas_buffer_setup_ops);
+	if (ret) {
+		dev_err(&client->dev, "cannot setup iio trigger\n");
+		goto unregister_trigger;
+	}
+
+	init_irq_work(&data->work, atlas_work_handler);
+
+	if (client->irq > 0) {
+		/* interrupt pin toggles on new conversion */
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+				NULL, atlas_interrupt_handler,
+				IRQF_TRIGGER_RISING |
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				"atlas_irq",
+				indio_dev);
+
+		if (ret)
+			dev_warn(&client->dev,
+				"request irq (%d) failed\n", client->irq);
+		else
+			data->interrupt_enabled = 1;
+	}
+
+	ret = atlas_set_powermode(data, 1);
+	if (ret) {
+		dev_err(&client->dev, "cannot power device on");
+		goto unregister_buffer;
+	}
+
+	pm_runtime_enable(&client->dev);
+	pm_runtime_set_autosuspend_delay(&client->dev, 2500);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&client->dev, "unable to register device\n");
+		goto unregister_pm;
+	}
+
+	return 0;
+
+unregister_pm:
+	pm_runtime_disable(&client->dev);
+	atlas_set_powermode(data, 0);
+
+unregister_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+
+unregister_trigger:
+	iio_trigger_unregister(data->trig);
+
+	return ret;
+}
+
+static void atlas_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct atlas_data *data = iio_priv(indio_dev);
+	int ret;
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	iio_trigger_unregister(data->trig);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+
+	ret = atlas_set_powermode(data, 0);
+	if (ret)
+		dev_err(&client->dev, "Failed to power down device (%pe)\n",
+			ERR_PTR(ret));
+}
+
+static int atlas_runtime_suspend(struct device *dev)
+{
+	struct atlas_data *data =
+		     iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+	return atlas_set_powermode(data, 0);
+}
+
+static int atlas_runtime_resume(struct device *dev)
+{
+	struct atlas_data *data =
+		     iio_priv(i2c_get_clientdata(to_i2c_client(dev)));
+
+	return atlas_set_powermode(data, 1);
+}
+
+static const struct dev_pm_ops atlas_pm_ops = {
+	RUNTIME_PM_OPS(atlas_runtime_suspend, atlas_runtime_resume, NULL)
+};
+
+static struct i2c_driver atlas_driver = {
+	.driver = {
+		.name	= ATLAS_DRV_NAME,
+		.of_match_table	= atlas_dt_ids,
+		.pm	= pm_ptr(&atlas_pm_ops),
+	},
+	.probe		= atlas_probe,
+	.remove		= atlas_remove,
+	.id_table	= atlas_id,
+};
+module_i2c_driver(atlas_driver);
+
+MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
+MODULE_DESCRIPTION("Atlas Scientific SM sensors");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/chemical/bme680.h b/drivers/iio/chemical/bme680.h
new file mode 100644
index 000000000..4edc5d21c
--- /dev/null
+++ b/drivers/iio/chemical/bme680.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef BME680_H_
+#define BME680_H_
+
+#define BME680_REG_CHIP_ID			0xD0
+#define   BME680_CHIP_ID_VAL			0x61
+#define BME680_REG_SOFT_RESET			0xE0
+#define   BME680_CMD_SOFTRESET			0xB6
+#define BME680_REG_STATUS			0x73
+#define   BME680_SPI_MEM_PAGE_BIT		BIT(4)
+#define     BME680_SPI_MEM_PAGE_1_VAL		1
+
+#define BME680_REG_TEMP_MSB			0x22
+#define BME680_REG_PRESS_MSB			0x1F
+#define BM6880_REG_HUMIDITY_MSB			0x25
+#define BME680_REG_GAS_MSB			0x2A
+#define BME680_REG_GAS_R_LSB			0x2B
+#define   BME680_GAS_STAB_BIT			BIT(4)
+#define   BME680_GAS_RANGE_MASK			GENMASK(3, 0)
+
+#define BME680_REG_CTRL_HUMIDITY		0x72
+#define   BME680_OSRS_HUMIDITY_MASK		GENMASK(2, 0)
+
+#define BME680_REG_CTRL_MEAS			0x74
+#define   BME680_OSRS_TEMP_MASK			GENMASK(7, 5)
+#define   BME680_OSRS_PRESS_MASK		GENMASK(4, 2)
+#define   BME680_MODE_MASK			GENMASK(1, 0)
+#define     BME680_MODE_FORCED			1
+#define     BME680_MODE_SLEEP			0
+
+#define BME680_REG_CONFIG			0x75
+#define   BME680_FILTER_MASK			GENMASK(4, 2)
+#define     BME680_FILTER_COEFF_VAL		BIT(1)
+
+/* TEMP/PRESS/HUMID reading skipped */
+#define BME680_MEAS_SKIPPED			0x8000
+
+#define BME680_MAX_OVERFLOW_VAL			0x40000000
+#define BME680_HUM_REG_SHIFT_VAL		4
+#define BME680_BIT_H1_DATA_MASK			GENMASK(3, 0)
+
+#define BME680_REG_RES_HEAT_RANGE		0x02
+#define   BME680_RHRANGE_MASK			GENMASK(5, 4)
+#define BME680_REG_RES_HEAT_VAL			0x00
+#define BME680_REG_RANGE_SW_ERR			0x04
+#define   BME680_RSERROR_MASK			GENMASK(7, 4)
+#define BME680_REG_RES_HEAT_0			0x5A
+#define BME680_REG_GAS_WAIT_0			0x64
+#define BME680_ADC_GAS_RES_SHIFT		6
+#define BME680_AMB_TEMP				25
+
+#define BME680_REG_CTRL_GAS_1			0x71
+#define   BME680_RUN_GAS_MASK			BIT(4)
+#define   BME680_NB_CONV_MASK			GENMASK(3, 0)
+
+#define BME680_REG_MEAS_STAT_0			0x1D
+#define   BME680_GAS_MEAS_BIT			BIT(6)
+
+/* Calibration Parameters */
+#define BME680_T2_LSB_REG	0x8A
+#define BME680_T3_REG		0x8C
+#define BME680_P1_LSB_REG	0x8E
+#define BME680_P2_LSB_REG	0x90
+#define BME680_P3_REG		0x92
+#define BME680_P4_LSB_REG	0x94
+#define BME680_P5_LSB_REG	0x96
+#define BME680_P7_REG		0x98
+#define BME680_P6_REG		0x99
+#define BME680_P8_LSB_REG	0x9C
+#define BME680_P9_LSB_REG	0x9E
+#define BME680_P10_REG		0xA0
+#define BME680_H2_LSB_REG	0xE2
+#define BME680_H2_MSB_REG	0xE1
+#define BME680_H1_MSB_REG	0xE3
+#define BME680_H1_LSB_REG	0xE2
+#define BME680_H3_REG		0xE4
+#define BME680_H4_REG		0xE5
+#define BME680_H5_REG		0xE6
+#define BME680_H6_REG		0xE7
+#define BME680_H7_REG		0xE8
+#define BME680_T1_LSB_REG	0xE9
+#define BME680_GH2_LSB_REG	0xEB
+#define BME680_GH1_REG		0xED
+#define BME680_GH3_REG		0xEE
+
+extern const struct regmap_config bme680_regmap_config;
+
+int bme680_core_probe(struct device *dev, struct regmap *regmap,
+		      const char *name);
+
+#endif  /* BME680_H_ */
diff --git a/drivers/iio/chemical/bme680_core.c b/drivers/iio/chemical/bme680_core.c
new file mode 100644
index 000000000..ef5e0e46f
--- /dev/null
+++ b/drivers/iio/chemical/bme680_core.c
@@ -0,0 +1,964 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Bosch BME680 - Temperature, Pressure, Humidity & Gas Sensor
+ *
+ * Copyright (C) 2017 - 2018 Bosch Sensortec GmbH
+ * Copyright (C) 2018 Himanshu Jha <himanshujha199640@gmail.com>
+ *
+ * Datasheet:
+ * https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME680-DS001-00.pdf
+ */
+#include <linux/acpi.h>
+#include <linux/bitfield.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/log2.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include "bme680.h"
+
+struct bme680_calib {
+	u16 par_t1;
+	s16 par_t2;
+	s8  par_t3;
+	u16 par_p1;
+	s16 par_p2;
+	s8  par_p3;
+	s16 par_p4;
+	s16 par_p5;
+	s8  par_p6;
+	s8  par_p7;
+	s16 par_p8;
+	s16 par_p9;
+	u8  par_p10;
+	u16 par_h1;
+	u16 par_h2;
+	s8  par_h3;
+	s8  par_h4;
+	s8  par_h5;
+	s8  par_h6;
+	s8  par_h7;
+	s8  par_gh1;
+	s16 par_gh2;
+	s8  par_gh3;
+	u8  res_heat_range;
+	s8  res_heat_val;
+	s8  range_sw_err;
+};
+
+struct bme680_data {
+	struct regmap *regmap;
+	struct bme680_calib bme680;
+	u8 oversampling_temp;
+	u8 oversampling_press;
+	u8 oversampling_humid;
+	u16 heater_dur;
+	u16 heater_temp;
+	/*
+	 * Carryover value from temperature conversion, used in pressure
+	 * and humidity compensation calculations.
+	 */
+	s32 t_fine;
+};
+
+static const struct regmap_range bme680_volatile_ranges[] = {
+	regmap_reg_range(BME680_REG_MEAS_STAT_0, BME680_REG_GAS_R_LSB),
+	regmap_reg_range(BME680_REG_STATUS, BME680_REG_STATUS),
+	regmap_reg_range(BME680_T2_LSB_REG, BME680_GH3_REG),
+};
+
+static const struct regmap_access_table bme680_volatile_table = {
+	.yes_ranges	= bme680_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(bme680_volatile_ranges),
+};
+
+const struct regmap_config bme680_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xef,
+	.volatile_table = &bme680_volatile_table,
+	.cache_type = REGCACHE_RBTREE,
+};
+EXPORT_SYMBOL_NS(bme680_regmap_config, IIO_BME680);
+
+static const struct iio_chan_spec bme680_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+	},
+	{
+		.type = IIO_PRESSURE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+	},
+	{
+		.type = IIO_HUMIDITYRELATIVE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				      BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+	},
+	{
+		.type = IIO_RESISTANCE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+	},
+};
+
+static int bme680_read_calib(struct bme680_data *data,
+			     struct bme680_calib *calib)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	unsigned int tmp, tmp_msb, tmp_lsb;
+	int ret;
+	__le16 buf;
+
+	/* Temperature related coefficients */
+	ret = regmap_bulk_read(data->regmap, BME680_T1_LSB_REG,
+			       &buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_T1_LSB_REG\n");
+		return ret;
+	}
+	calib->par_t1 = le16_to_cpu(buf);
+
+	ret = regmap_bulk_read(data->regmap, BME680_T2_LSB_REG,
+			       &buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_T2_LSB_REG\n");
+		return ret;
+	}
+	calib->par_t2 = le16_to_cpu(buf);
+
+	ret = regmap_read(data->regmap, BME680_T3_REG, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_T3_REG\n");
+		return ret;
+	}
+	calib->par_t3 = tmp;
+
+	/* Pressure related coefficients */
+	ret = regmap_bulk_read(data->regmap, BME680_P1_LSB_REG,
+			       &buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_P1_LSB_REG\n");
+		return ret;
+	}
+	calib->par_p1 = le16_to_cpu(buf);
+
+	ret = regmap_bulk_read(data->regmap, BME680_P2_LSB_REG,
+			       &buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_P2_LSB_REG\n");
+		return ret;
+	}
+	calib->par_p2 = le16_to_cpu(buf);
+
+	ret = regmap_read(data->regmap, BME680_P3_REG, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_P3_REG\n");
+		return ret;
+	}
+	calib->par_p3 = tmp;
+
+	ret = regmap_bulk_read(data->regmap, BME680_P4_LSB_REG,
+			       &buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_P4_LSB_REG\n");
+		return ret;
+	}
+	calib->par_p4 = le16_to_cpu(buf);
+
+	ret = regmap_bulk_read(data->regmap, BME680_P5_LSB_REG,
+			       &buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_P5_LSB_REG\n");
+		return ret;
+	}
+	calib->par_p5 = le16_to_cpu(buf);
+
+	ret = regmap_read(data->regmap, BME680_P6_REG, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_P6_REG\n");
+		return ret;
+	}
+	calib->par_p6 = tmp;
+
+	ret = regmap_read(data->regmap, BME680_P7_REG, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_P7_REG\n");
+		return ret;
+	}
+	calib->par_p7 = tmp;
+
+	ret = regmap_bulk_read(data->regmap, BME680_P8_LSB_REG,
+			       &buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_P8_LSB_REG\n");
+		return ret;
+	}
+	calib->par_p8 = le16_to_cpu(buf);
+
+	ret = regmap_bulk_read(data->regmap, BME680_P9_LSB_REG,
+			       &buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_P9_LSB_REG\n");
+		return ret;
+	}
+	calib->par_p9 = le16_to_cpu(buf);
+
+	ret = regmap_read(data->regmap, BME680_P10_REG, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_P10_REG\n");
+		return ret;
+	}
+	calib->par_p10 = tmp;
+
+	/* Humidity related coefficients */
+	ret = regmap_read(data->regmap, BME680_H1_MSB_REG, &tmp_msb);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_H1_MSB_REG\n");
+		return ret;
+	}
+	ret = regmap_read(data->regmap, BME680_H1_LSB_REG, &tmp_lsb);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_H1_LSB_REG\n");
+		return ret;
+	}
+	calib->par_h1 = (tmp_msb << BME680_HUM_REG_SHIFT_VAL) |
+			(tmp_lsb & BME680_BIT_H1_DATA_MASK);
+
+	ret = regmap_read(data->regmap, BME680_H2_MSB_REG, &tmp_msb);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_H2_MSB_REG\n");
+		return ret;
+	}
+	ret = regmap_read(data->regmap, BME680_H2_LSB_REG, &tmp_lsb);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_H2_LSB_REG\n");
+		return ret;
+	}
+	calib->par_h2 = (tmp_msb << BME680_HUM_REG_SHIFT_VAL) |
+			(tmp_lsb >> BME680_HUM_REG_SHIFT_VAL);
+
+	ret = regmap_read(data->regmap, BME680_H3_REG, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_H3_REG\n");
+		return ret;
+	}
+	calib->par_h3 = tmp;
+
+	ret = regmap_read(data->regmap, BME680_H4_REG, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_H4_REG\n");
+		return ret;
+	}
+	calib->par_h4 = tmp;
+
+	ret = regmap_read(data->regmap, BME680_H5_REG, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_H5_REG\n");
+		return ret;
+	}
+	calib->par_h5 = tmp;
+
+	ret = regmap_read(data->regmap, BME680_H6_REG, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_H6_REG\n");
+		return ret;
+	}
+	calib->par_h6 = tmp;
+
+	ret = regmap_read(data->regmap, BME680_H7_REG, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_H7_REG\n");
+		return ret;
+	}
+	calib->par_h7 = tmp;
+
+	/* Gas heater related coefficients */
+	ret = regmap_read(data->regmap, BME680_GH1_REG, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_GH1_REG\n");
+		return ret;
+	}
+	calib->par_gh1 = tmp;
+
+	ret = regmap_bulk_read(data->regmap, BME680_GH2_LSB_REG,
+			       &buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_GH2_LSB_REG\n");
+		return ret;
+	}
+	calib->par_gh2 = le16_to_cpu(buf);
+
+	ret = regmap_read(data->regmap, BME680_GH3_REG, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read BME680_GH3_REG\n");
+		return ret;
+	}
+	calib->par_gh3 = tmp;
+
+	/* Other coefficients */
+	ret = regmap_read(data->regmap, BME680_REG_RES_HEAT_RANGE, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read resistance heat range\n");
+		return ret;
+	}
+	calib->res_heat_range = FIELD_GET(BME680_RHRANGE_MASK, tmp);
+
+	ret = regmap_read(data->regmap, BME680_REG_RES_HEAT_VAL, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read resistance heat value\n");
+		return ret;
+	}
+	calib->res_heat_val = tmp;
+
+	ret = regmap_read(data->regmap, BME680_REG_RANGE_SW_ERR, &tmp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read range software error\n");
+		return ret;
+	}
+	calib->range_sw_err = FIELD_GET(BME680_RSERROR_MASK, tmp);
+
+	return 0;
+}
+
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L876
+ *
+ * Returns temperature measurement in DegC, resolutions is 0.01 DegC. Therefore,
+ * output value of "3233" represents 32.33 DegC.
+ */
+static s16 bme680_compensate_temp(struct bme680_data *data,
+				  s32 adc_temp)
+{
+	struct bme680_calib *calib = &data->bme680;
+	s64 var1, var2, var3;
+	s16 calc_temp;
+
+	/* If the calibration is invalid, attempt to reload it */
+	if (!calib->par_t2)
+		bme680_read_calib(data, calib);
+
+	var1 = (adc_temp >> 3) - (calib->par_t1 << 1);
+	var2 = (var1 * calib->par_t2) >> 11;
+	var3 = ((var1 >> 1) * (var1 >> 1)) >> 12;
+	var3 = (var3 * (calib->par_t3 << 4)) >> 14;
+	data->t_fine = var2 + var3;
+	calc_temp = (data->t_fine * 5 + 128) >> 8;
+
+	return calc_temp;
+}
+
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L896
+ *
+ * Returns pressure measurement in Pa. Output value of "97356" represents
+ * 97356 Pa = 973.56 hPa.
+ */
+static u32 bme680_compensate_press(struct bme680_data *data,
+				   u32 adc_press)
+{
+	struct bme680_calib *calib = &data->bme680;
+	s32 var1, var2, var3, press_comp;
+
+	var1 = (data->t_fine >> 1) - 64000;
+	var2 = ((((var1 >> 2) * (var1 >> 2)) >> 11) * calib->par_p6) >> 2;
+	var2 = var2 + (var1 * calib->par_p5 << 1);
+	var2 = (var2 >> 2) + (calib->par_p4 << 16);
+	var1 = (((((var1 >> 2) * (var1 >> 2)) >> 13) *
+			(calib->par_p3 << 5)) >> 3) +
+			((calib->par_p2 * var1) >> 1);
+	var1 = var1 >> 18;
+	var1 = ((32768 + var1) * calib->par_p1) >> 15;
+	press_comp = 1048576 - adc_press;
+	press_comp = ((press_comp - (var2 >> 12)) * 3125);
+
+	if (press_comp >= BME680_MAX_OVERFLOW_VAL)
+		press_comp = ((press_comp / (u32)var1) << 1);
+	else
+		press_comp = ((press_comp << 1) / (u32)var1);
+
+	var1 = (calib->par_p9 * (((press_comp >> 3) *
+			(press_comp >> 3)) >> 13)) >> 12;
+	var2 = ((press_comp >> 2) * calib->par_p8) >> 13;
+	var3 = ((press_comp >> 8) * (press_comp >> 8) *
+			(press_comp >> 8) * calib->par_p10) >> 17;
+
+	press_comp += (var1 + var2 + var3 + (calib->par_p7 << 7)) >> 4;
+
+	return press_comp;
+}
+
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L937
+ *
+ * Returns humidity measurement in percent, resolution is 0.001 percent. Output
+ * value of "43215" represents 43.215 %rH.
+ */
+static u32 bme680_compensate_humid(struct bme680_data *data,
+				   u16 adc_humid)
+{
+	struct bme680_calib *calib = &data->bme680;
+	s32 var1, var2, var3, var4, var5, var6, temp_scaled, calc_hum;
+
+	temp_scaled = (data->t_fine * 5 + 128) >> 8;
+	var1 = (adc_humid - ((s32) ((s32) calib->par_h1 * 16))) -
+		(((temp_scaled * (s32) calib->par_h3) / 100) >> 1);
+	var2 = ((s32) calib->par_h2 *
+		(((temp_scaled * calib->par_h4) / 100) +
+		 (((temp_scaled * ((temp_scaled * calib->par_h5) / 100))
+		   >> 6) / 100) + (1 << 14))) >> 10;
+	var3 = var1 * var2;
+	var4 = calib->par_h6 << 7;
+	var4 = (var4 + ((temp_scaled * calib->par_h7) / 100)) >> 4;
+	var5 = ((var3 >> 14) * (var3 >> 14)) >> 10;
+	var6 = (var4 * var5) >> 1;
+	calc_hum = (((var3 + var6) >> 10) * 1000) >> 12;
+
+	calc_hum = clamp(calc_hum, 0, 100000); /* clamp between 0-100 %rH */
+
+	return calc_hum;
+}
+
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L973
+ *
+ * Returns gas measurement in Ohm. Output value of "82986" represent 82986 ohms.
+ */
+static u32 bme680_compensate_gas(struct bme680_data *data, u16 gas_res_adc,
+				 u8 gas_range)
+{
+	struct bme680_calib *calib = &data->bme680;
+	s64 var1;
+	u64 var2;
+	s64 var3;
+	u32 calc_gas_res;
+
+	/* Look up table for the possible gas range values */
+	const u32 lookupTable[16] = {2147483647u, 2147483647u,
+				2147483647u, 2147483647u, 2147483647u,
+				2126008810u, 2147483647u, 2130303777u,
+				2147483647u, 2147483647u, 2143188679u,
+				2136746228u, 2147483647u, 2126008810u,
+				2147483647u, 2147483647u};
+
+	var1 = ((1340 + (5 * (s64) calib->range_sw_err)) *
+			((s64) lookupTable[gas_range])) >> 16;
+	var2 = ((gas_res_adc << 15) - 16777216) + var1;
+	var3 = ((125000 << (15 - gas_range)) * var1) >> 9;
+	var3 += (var2 >> 1);
+	calc_gas_res = div64_s64(var3, (s64) var2);
+
+	return calc_gas_res;
+}
+
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L1002
+ */
+static u8 bme680_calc_heater_res(struct bme680_data *data, u16 temp)
+{
+	struct bme680_calib *calib = &data->bme680;
+	s32 var1, var2, var3, var4, var5, heatr_res_x100;
+	u8 heatr_res;
+
+	if (temp > 400) /* Cap temperature */
+		temp = 400;
+
+	var1 = (((s32) BME680_AMB_TEMP * calib->par_gh3) / 1000) * 256;
+	var2 = (calib->par_gh1 + 784) * (((((calib->par_gh2 + 154009) *
+						temp * 5) / 100)
+						+ 3276800) / 10);
+	var3 = var1 + (var2 / 2);
+	var4 = (var3 / (calib->res_heat_range + 4));
+	var5 = 131 * calib->res_heat_val + 65536;
+	heatr_res_x100 = ((var4 / var5) - 250) * 34;
+	heatr_res = DIV_ROUND_CLOSEST(heatr_res_x100, 100);
+
+	return heatr_res;
+}
+
+/*
+ * Taken from Bosch BME680 API:
+ * https://github.com/BoschSensortec/BME680_driver/blob/63bb5336/bme680.c#L1188
+ */
+static u8 bme680_calc_heater_dur(u16 dur)
+{
+	u8 durval, factor = 0;
+
+	if (dur >= 0xfc0) {
+		durval = 0xff; /* Max duration */
+	} else {
+		while (dur > 0x3F) {
+			dur = dur / 4;
+			factor += 1;
+		}
+		durval = dur + (factor * 64);
+	}
+
+	return durval;
+}
+
+static int bme680_set_mode(struct bme680_data *data, bool mode)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+
+	if (mode) {
+		ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS,
+					BME680_MODE_MASK, BME680_MODE_FORCED);
+		if (ret < 0)
+			dev_err(dev, "failed to set forced mode\n");
+
+	} else {
+		ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS,
+					BME680_MODE_MASK, BME680_MODE_SLEEP);
+		if (ret < 0)
+			dev_err(dev, "failed to set sleep mode\n");
+
+	}
+
+	return ret;
+}
+
+static u8 bme680_oversampling_to_reg(u8 val)
+{
+	return ilog2(val) + 1;
+}
+
+static int bme680_chip_config(struct bme680_data *data)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	u8 osrs;
+
+	osrs = FIELD_PREP(
+		BME680_OSRS_HUMIDITY_MASK,
+		bme680_oversampling_to_reg(data->oversampling_humid));
+	/*
+	 * Highly recommended to set oversampling of humidity before
+	 * temperature/pressure oversampling.
+	 */
+	ret = regmap_update_bits(data->regmap, BME680_REG_CTRL_HUMIDITY,
+				 BME680_OSRS_HUMIDITY_MASK, osrs);
+	if (ret < 0) {
+		dev_err(dev, "failed to write ctrl_hum register\n");
+		return ret;
+	}
+
+	/* IIR filter settings */
+	ret = regmap_update_bits(data->regmap, BME680_REG_CONFIG,
+				 BME680_FILTER_MASK,
+				 BME680_FILTER_COEFF_VAL);
+	if (ret < 0) {
+		dev_err(dev, "failed to write config register\n");
+		return ret;
+	}
+
+	osrs = FIELD_PREP(BME680_OSRS_TEMP_MASK,
+			  bme680_oversampling_to_reg(data->oversampling_temp)) |
+	       FIELD_PREP(BME680_OSRS_PRESS_MASK,
+			  bme680_oversampling_to_reg(data->oversampling_press));
+	ret = regmap_write_bits(data->regmap, BME680_REG_CTRL_MEAS,
+				BME680_OSRS_TEMP_MASK | BME680_OSRS_PRESS_MASK,
+				osrs);
+	if (ret < 0)
+		dev_err(dev, "failed to write ctrl_meas register\n");
+
+	return ret;
+}
+
+static int bme680_gas_config(struct bme680_data *data)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	u8 heatr_res, heatr_dur;
+
+	heatr_res = bme680_calc_heater_res(data, data->heater_temp);
+
+	/* set target heater temperature */
+	ret = regmap_write(data->regmap, BME680_REG_RES_HEAT_0, heatr_res);
+	if (ret < 0) {
+		dev_err(dev, "failed to write res_heat_0 register\n");
+		return ret;
+	}
+
+	heatr_dur = bme680_calc_heater_dur(data->heater_dur);
+
+	/* set target heating duration */
+	ret = regmap_write(data->regmap, BME680_REG_GAS_WAIT_0, heatr_dur);
+	if (ret < 0) {
+		dev_err(dev, "failed to write gas_wait_0 register\n");
+		return ret;
+	}
+
+	/* Enable the gas sensor and select heater profile set-point 0 */
+	ret = regmap_update_bits(data->regmap, BME680_REG_CTRL_GAS_1,
+				 BME680_RUN_GAS_MASK | BME680_NB_CONV_MASK,
+				 FIELD_PREP(BME680_RUN_GAS_MASK, 1) |
+				 FIELD_PREP(BME680_NB_CONV_MASK, 0));
+	if (ret < 0)
+		dev_err(dev, "failed to write ctrl_gas_1 register\n");
+
+	return ret;
+}
+
+static int bme680_read_temp(struct bme680_data *data, int *val)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	__be32 tmp = 0;
+	s32 adc_temp;
+	s16 comp_temp;
+
+	/* set forced mode to trigger measurement */
+	ret = bme680_set_mode(data, true);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_bulk_read(data->regmap, BME680_REG_TEMP_MSB,
+			       &tmp, 3);
+	if (ret < 0) {
+		dev_err(dev, "failed to read temperature\n");
+		return ret;
+	}
+
+	adc_temp = be32_to_cpu(tmp) >> 12;
+	if (adc_temp == BME680_MEAS_SKIPPED) {
+		/* reading was skipped */
+		dev_err(dev, "reading temperature skipped\n");
+		return -EINVAL;
+	}
+	comp_temp = bme680_compensate_temp(data, adc_temp);
+	/*
+	 * val might be NULL if we're called by the read_press/read_humid
+	 * routine which is called to get t_fine value used in
+	 * compensate_press/compensate_humid to get compensated
+	 * pressure/humidity readings.
+	 */
+	if (val) {
+		*val = comp_temp * 10; /* Centidegrees to millidegrees */
+		return IIO_VAL_INT;
+	}
+
+	return ret;
+}
+
+static int bme680_read_press(struct bme680_data *data,
+			     int *val, int *val2)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	__be32 tmp = 0;
+	s32 adc_press;
+
+	/* Read and compensate temperature to get a reading of t_fine */
+	ret = bme680_read_temp(data, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_bulk_read(data->regmap, BME680_REG_PRESS_MSB,
+			       &tmp, 3);
+	if (ret < 0) {
+		dev_err(dev, "failed to read pressure\n");
+		return ret;
+	}
+
+	adc_press = be32_to_cpu(tmp) >> 12;
+	if (adc_press == BME680_MEAS_SKIPPED) {
+		/* reading was skipped */
+		dev_err(dev, "reading pressure skipped\n");
+		return -EINVAL;
+	}
+
+	*val = bme680_compensate_press(data, adc_press);
+	*val2 = 100;
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int bme680_read_humid(struct bme680_data *data,
+			     int *val, int *val2)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	__be16 tmp = 0;
+	s32 adc_humidity;
+	u32 comp_humidity;
+
+	/* Read and compensate temperature to get a reading of t_fine */
+	ret = bme680_read_temp(data, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_bulk_read(data->regmap, BM6880_REG_HUMIDITY_MSB,
+			       &tmp, sizeof(tmp));
+	if (ret < 0) {
+		dev_err(dev, "failed to read humidity\n");
+		return ret;
+	}
+
+	adc_humidity = be16_to_cpu(tmp);
+	if (adc_humidity == BME680_MEAS_SKIPPED) {
+		/* reading was skipped */
+		dev_err(dev, "reading humidity skipped\n");
+		return -EINVAL;
+	}
+	comp_humidity = bme680_compensate_humid(data, adc_humidity);
+
+	*val = comp_humidity;
+	*val2 = 1000;
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int bme680_read_gas(struct bme680_data *data,
+			   int *val)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	__be16 tmp = 0;
+	unsigned int check;
+	u16 adc_gas_res;
+	u8 gas_range;
+
+	/* Set heater settings */
+	ret = bme680_gas_config(data);
+	if (ret < 0) {
+		dev_err(dev, "failed to set gas config\n");
+		return ret;
+	}
+
+	/* set forced mode to trigger measurement */
+	ret = bme680_set_mode(data, true);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(data->regmap, BME680_REG_MEAS_STAT_0, &check);
+	if (check & BME680_GAS_MEAS_BIT) {
+		dev_err(dev, "gas measurement incomplete\n");
+		return -EBUSY;
+	}
+
+	ret = regmap_read(data->regmap, BME680_REG_GAS_R_LSB, &check);
+	if (ret < 0) {
+		dev_err(dev, "failed to read gas_r_lsb register\n");
+		return ret;
+	}
+
+	/*
+	 * occurs if either the gas heating duration was insuffient
+	 * to reach the target heater temperature or the target
+	 * heater temperature was too high for the heater sink to
+	 * reach.
+	 */
+	if ((check & BME680_GAS_STAB_BIT) == 0) {
+		dev_err(dev, "heater failed to reach the target temperature\n");
+		return -EINVAL;
+	}
+
+	ret = regmap_bulk_read(data->regmap, BME680_REG_GAS_MSB,
+			       &tmp, sizeof(tmp));
+	if (ret < 0) {
+		dev_err(dev, "failed to read gas resistance\n");
+		return ret;
+	}
+
+	gas_range = check & BME680_GAS_RANGE_MASK;
+	adc_gas_res = be16_to_cpu(tmp) >> BME680_ADC_GAS_RES_SHIFT;
+
+	*val = bme680_compensate_gas(data, adc_gas_res, gas_range);
+	return IIO_VAL_INT;
+}
+
+static int bme680_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct bme680_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_TEMP:
+			return bme680_read_temp(data, val);
+		case IIO_PRESSURE:
+			return bme680_read_press(data, val, val2);
+		case IIO_HUMIDITYRELATIVE:
+			return bme680_read_humid(data, val, val2);
+		case IIO_RESISTANCE:
+			return bme680_read_gas(data, val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = data->oversampling_temp;
+			return IIO_VAL_INT;
+		case IIO_PRESSURE:
+			*val = data->oversampling_press;
+			return IIO_VAL_INT;
+		case IIO_HUMIDITYRELATIVE:
+			*val = data->oversampling_humid;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static bool bme680_is_valid_oversampling(int rate)
+{
+	return (rate > 0 && rate <= 16 && is_power_of_2(rate));
+}
+
+static int bme680_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct bme680_data *data = iio_priv(indio_dev);
+
+	if (val2 != 0)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+	{
+		if (!bme680_is_valid_oversampling(val))
+			return -EINVAL;
+
+		switch (chan->type) {
+		case IIO_TEMP:
+			data->oversampling_temp = val;
+			break;
+		case IIO_PRESSURE:
+			data->oversampling_press = val;
+			break;
+		case IIO_HUMIDITYRELATIVE:
+			data->oversampling_humid = val;
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		return bme680_chip_config(data);
+	}
+	default:
+		return -EINVAL;
+	}
+}
+
+static const char bme680_oversampling_ratio_show[] = "1 2 4 8 16";
+
+static IIO_CONST_ATTR(oversampling_ratio_available,
+		      bme680_oversampling_ratio_show);
+
+static struct attribute *bme680_attributes[] = {
+	&iio_const_attr_oversampling_ratio_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group bme680_attribute_group = {
+	.attrs = bme680_attributes,
+};
+
+static const struct iio_info bme680_info = {
+	.read_raw = &bme680_read_raw,
+	.write_raw = &bme680_write_raw,
+	.attrs = &bme680_attribute_group,
+};
+
+static const char *bme680_match_acpi_device(struct device *dev)
+{
+	const struct acpi_device_id *id;
+
+	id = acpi_match_device(dev->driver->acpi_match_table, dev);
+	if (!id)
+		return NULL;
+
+	return dev_name(dev);
+}
+
+int bme680_core_probe(struct device *dev, struct regmap *regmap,
+		      const char *name)
+{
+	struct iio_dev *indio_dev;
+	struct bme680_data *data;
+	unsigned int val;
+	int ret;
+
+	ret = regmap_write(regmap, BME680_REG_SOFT_RESET,
+			   BME680_CMD_SOFTRESET);
+	if (ret < 0) {
+		dev_err(dev, "Failed to reset chip\n");
+		return ret;
+	}
+
+	ret = regmap_read(regmap, BME680_REG_CHIP_ID, &val);
+	if (ret < 0) {
+		dev_err(dev, "Error reading chip ID\n");
+		return ret;
+	}
+
+	if (val != BME680_CHIP_ID_VAL) {
+		dev_err(dev, "Wrong chip ID, got %x expected %x\n",
+				val, BME680_CHIP_ID_VAL);
+		return -ENODEV;
+	}
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	if (!name && ACPI_HANDLE(dev))
+		name = bme680_match_acpi_device(dev);
+
+	data = iio_priv(indio_dev);
+	dev_set_drvdata(dev, indio_dev);
+	data->regmap = regmap;
+	indio_dev->name = name;
+	indio_dev->channels = bme680_channels;
+	indio_dev->num_channels = ARRAY_SIZE(bme680_channels);
+	indio_dev->info = &bme680_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	/* default values for the sensor */
+	data->oversampling_humid = 2; /* 2X oversampling rate */
+	data->oversampling_press = 4; /* 4X oversampling rate */
+	data->oversampling_temp = 8;  /* 8X oversampling rate */
+	data->heater_temp = 320; /* degree Celsius */
+	data->heater_dur = 150;  /* milliseconds */
+
+	ret = bme680_chip_config(data);
+	if (ret < 0) {
+		dev_err(dev, "failed to set chip_config data\n");
+		return ret;
+	}
+
+	ret = bme680_gas_config(data);
+	if (ret < 0) {
+		dev_err(dev, "failed to set gas config data\n");
+		return ret;
+	}
+
+	ret = bme680_read_calib(data, &data->bme680);
+	if (ret < 0) {
+		dev_err(dev,
+			"failed to read calibration coefficients at probe\n");
+		return ret;
+	}
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_NS_GPL(bme680_core_probe, IIO_BME680);
+
+MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>");
+MODULE_DESCRIPTION("Bosch BME680 Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/bme680_i2c.c b/drivers/iio/chemical/bme680_i2c.c
new file mode 100644
index 000000000..20f2c20b6
--- /dev/null
+++ b/drivers/iio/chemical/bme680_i2c.c
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BME680 - I2C Driver
+ *
+ * Copyright (C) 2018 Himanshu Jha <himanshujha199640@gmail.com>
+ *
+ * 7-Bit I2C slave address is:
+ *	- 0x76 if SDO is pulled to GND
+ *	- 0x77 if SDO is pulled to VDDIO
+ *
+ * Note: SDO pin cannot be left floating otherwise I2C address
+ *	 will be undefined.
+ */
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "bme680.h"
+
+static int bme680_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	const char *name = NULL;
+
+	regmap = devm_regmap_init_i2c(client, &bme680_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to register i2c regmap %ld\n", PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	if (id)
+		name = id->name;
+
+	return bme680_core_probe(&client->dev, regmap, name);
+}
+
+static const struct i2c_device_id bme680_i2c_id[] = {
+	{"bme680", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, bme680_i2c_id);
+
+static const struct of_device_id bme680_of_i2c_match[] = {
+	{ .compatible = "bosch,bme680", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bme680_of_i2c_match);
+
+static struct i2c_driver bme680_i2c_driver = {
+	.driver = {
+		.name			= "bme680_i2c",
+		.of_match_table		= bme680_of_i2c_match,
+	},
+	.probe = bme680_i2c_probe,
+	.id_table = bme680_i2c_id,
+};
+module_i2c_driver(bme680_i2c_driver);
+
+MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>");
+MODULE_DESCRIPTION("BME680 I2C driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_BME680);
diff --git a/drivers/iio/chemical/bme680_spi.c b/drivers/iio/chemical/bme680_spi.c
new file mode 100644
index 000000000..4404d42ae
--- /dev/null
+++ b/drivers/iio/chemical/bme680_spi.c
@@ -0,0 +1,166 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * BME680 - SPI Driver
+ *
+ * Copyright (C) 2018 Himanshu Jha <himanshujha199640@gmail.com>
+ */
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "bme680.h"
+
+struct bme680_spi_bus_context {
+	struct spi_device *spi;
+	u8 current_page;
+};
+
+/*
+ * In SPI mode there are only 7 address bits, a "page" register determines
+ * which part of the 8-bit range is active. This function looks at the address
+ * and writes the page selection bit if needed
+ */
+static int bme680_regmap_spi_select_page(
+	struct bme680_spi_bus_context *ctx, u8 reg)
+{
+	struct spi_device *spi = ctx->spi;
+	int ret;
+	u8 buf[2];
+	u8 page = (reg & 0x80) ? 0 : 1; /* Page "1" is low range */
+
+	if (page == ctx->current_page)
+		return 0;
+
+	/*
+	 * Data sheet claims we're only allowed to change bit 4, so we must do
+	 * a read-modify-write on each and every page select
+	 */
+	buf[0] = BME680_REG_STATUS;
+	ret = spi_write_then_read(spi, buf, 1, buf + 1, 1);
+	if (ret < 0) {
+		dev_err(&spi->dev, "failed to set page %u\n", page);
+		return ret;
+	}
+
+	buf[0] = BME680_REG_STATUS;
+	if (page)
+		buf[1] |= BME680_SPI_MEM_PAGE_BIT;
+	else
+		buf[1] &= ~BME680_SPI_MEM_PAGE_BIT;
+
+	ret = spi_write(spi, buf, 2);
+	if (ret < 0) {
+		dev_err(&spi->dev, "failed to set page %u\n", page);
+		return ret;
+	}
+
+	ctx->current_page = page;
+
+	return 0;
+}
+
+static int bme680_regmap_spi_write(void *context, const void *data,
+				   size_t count)
+{
+	struct bme680_spi_bus_context *ctx = context;
+	struct spi_device *spi = ctx->spi;
+	int ret;
+	u8 buf[2];
+
+	memcpy(buf, data, 2);
+
+	ret = bme680_regmap_spi_select_page(ctx, buf[0]);
+	if (ret)
+		return ret;
+
+	/*
+	 * The SPI register address (= full register address without bit 7)
+	 * and the write command (bit7 = RW = '0')
+	 */
+	buf[0] &= ~0x80;
+
+	return spi_write(spi, buf, 2);
+}
+
+static int bme680_regmap_spi_read(void *context, const void *reg,
+				  size_t reg_size, void *val, size_t val_size)
+{
+	struct bme680_spi_bus_context *ctx = context;
+	struct spi_device *spi = ctx->spi;
+	int ret;
+	u8 addr = *(const u8 *)reg;
+
+	ret = bme680_regmap_spi_select_page(ctx, addr);
+	if (ret)
+		return ret;
+
+	addr |= 0x80; /* bit7 = RW = '1' */
+
+	return spi_write_then_read(spi, &addr, 1, val, val_size);
+}
+
+static struct regmap_bus bme680_regmap_bus = {
+	.write = bme680_regmap_spi_write,
+	.read = bme680_regmap_spi_read,
+	.reg_format_endian_default = REGMAP_ENDIAN_BIG,
+	.val_format_endian_default = REGMAP_ENDIAN_BIG,
+};
+
+static int bme680_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct bme680_spi_bus_context *bus_context;
+	struct regmap *regmap;
+	int ret;
+
+	spi->bits_per_word = 8;
+	ret = spi_setup(spi);
+	if (ret < 0) {
+		dev_err(&spi->dev, "spi_setup failed!\n");
+		return ret;
+	}
+
+	bus_context = devm_kzalloc(&spi->dev, sizeof(*bus_context), GFP_KERNEL);
+	if (!bus_context)
+		return -ENOMEM;
+
+	bus_context->spi = spi;
+	bus_context->current_page = 0xff; /* Undefined on warm boot */
+
+	regmap = devm_regmap_init(&spi->dev, &bme680_regmap_bus,
+				  bus_context, &bme680_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "Failed to register spi regmap %ld\n", PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return bme680_core_probe(&spi->dev, regmap, id->name);
+}
+
+static const struct spi_device_id bme680_spi_id[] = {
+	{"bme680", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(spi, bme680_spi_id);
+
+static const struct of_device_id bme680_of_spi_match[] = {
+	{ .compatible = "bosch,bme680", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bme680_of_spi_match);
+
+static struct spi_driver bme680_spi_driver = {
+	.driver = {
+		.name			= "bme680_spi",
+		.of_match_table		= bme680_of_spi_match,
+	},
+	.probe = bme680_spi_probe,
+	.id_table = bme680_spi_id,
+};
+module_spi_driver(bme680_spi_driver);
+
+MODULE_AUTHOR("Himanshu Jha <himanshujha199640@gmail.com>");
+MODULE_DESCRIPTION("Bosch BME680 SPI driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_BME680);
diff --git a/drivers/iio/chemical/ccs811.c b/drivers/iio/chemical/ccs811.c
new file mode 100644
index 000000000..ba4045e20
--- /dev/null
+++ b/drivers/iio/chemical/ccs811.c
@@ -0,0 +1,578 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ccs811.c - Support for AMS CCS811 VOC Sensor
+ *
+ * Copyright (C) 2017 Narcisa Vasile <narcisaanamaria12@gmail.com>
+ *
+ * Datasheet: ams.com/content/download/951091/2269479/CCS811_DS000459_3-00.pdf
+ *
+ * IIO driver for AMS CCS811 (I2C address 0x5A/0x5B set by ADDR Low/High)
+ *
+ * TODO:
+ * 1. Make the drive mode selectable form userspace
+ * 2. Add support for interrupts
+ * 3. Adjust time to wait for data to be ready based on selected operation mode
+ * 4. Read error register and put the information in logs
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/module.h>
+
+#define CCS811_STATUS		0x00
+#define CCS811_MEAS_MODE	0x01
+#define CCS811_ALG_RESULT_DATA	0x02
+#define CCS811_RAW_DATA		0x03
+#define CCS811_HW_ID		0x20
+#define CCS811_HW_ID_VALUE	0x81
+#define CCS811_HW_VERSION	0x21
+#define CCS811_HW_VERSION_VALUE	0x10
+#define CCS811_HW_VERSION_MASK	0xF0
+#define CCS811_ERR		0xE0
+/* Used to transition from boot to application mode */
+#define CCS811_APP_START	0xF4
+#define CCS811_SW_RESET		0xFF
+
+/* Status register flags */
+#define CCS811_STATUS_ERROR		BIT(0)
+#define CCS811_STATUS_DATA_READY	BIT(3)
+#define CCS811_STATUS_APP_VALID_MASK	BIT(4)
+#define CCS811_STATUS_APP_VALID_LOADED	BIT(4)
+/*
+ * Value of FW_MODE bit of STATUS register describes the sensor's state:
+ * 0: Firmware is in boot mode, this allows new firmware to be loaded
+ * 1: Firmware is in application mode. CCS811 is ready to take ADC measurements
+ */
+#define CCS811_STATUS_FW_MODE_MASK	BIT(7)
+#define CCS811_STATUS_FW_MODE_APPLICATION	BIT(7)
+
+/* Measurement modes */
+#define CCS811_MODE_IDLE	0x00
+#define CCS811_MODE_IAQ_1SEC	0x10
+#define CCS811_MODE_IAQ_10SEC	0x20
+#define CCS811_MODE_IAQ_60SEC	0x30
+#define CCS811_MODE_RAW_DATA	0x40
+
+#define CCS811_MEAS_MODE_INTERRUPT	BIT(3)
+
+#define CCS811_VOLTAGE_MASK	0x3FF
+
+struct ccs811_reading {
+	__be16 co2;
+	__be16 voc;
+	u8 status;
+	u8 error;
+	__be16 raw_data;
+} __attribute__((__packed__));
+
+struct ccs811_data {
+	struct i2c_client *client;
+	struct mutex lock; /* Protect readings */
+	struct ccs811_reading buffer;
+	struct iio_trigger *drdy_trig;
+	struct gpio_desc *wakeup_gpio;
+	bool drdy_trig_on;
+	/* Ensures correct alignment of timestamp if present */
+	struct {
+		s16 channels[2];
+		s64 ts __aligned(8);
+	} scan;
+};
+
+static const struct iio_chan_spec ccs811_channels[] = {
+	{
+		.type = IIO_CURRENT,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = -1,
+	}, {
+		.type = IIO_VOLTAGE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = -1,
+	}, {
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_CO2,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	}, {
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_VOC,
+		.modified = 1,
+		.info_mask_separate =  BIT(IIO_CHAN_INFO_RAW) |
+				       BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(2),
+};
+
+/*
+ * The CCS811 powers-up in boot mode. A setup write to CCS811_APP_START will
+ * transition the sensor to application mode.
+ */
+static int ccs811_start_sensor_application(struct i2c_client *client)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, CCS811_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if ((ret & CCS811_STATUS_FW_MODE_APPLICATION))
+		return 0;
+
+	if ((ret & CCS811_STATUS_APP_VALID_MASK) !=
+	    CCS811_STATUS_APP_VALID_LOADED)
+		return -EIO;
+
+	ret = i2c_smbus_write_byte(client, CCS811_APP_START);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_read_byte_data(client, CCS811_STATUS);
+	if (ret < 0)
+		return ret;
+
+	if ((ret & CCS811_STATUS_FW_MODE_MASK) !=
+	    CCS811_STATUS_FW_MODE_APPLICATION) {
+		dev_err(&client->dev, "Application failed to start. Sensor is still in boot mode.\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int ccs811_setup(struct i2c_client *client)
+{
+	int ret;
+
+	ret = ccs811_start_sensor_application(client);
+	if (ret < 0)
+		return ret;
+
+	return i2c_smbus_write_byte_data(client, CCS811_MEAS_MODE,
+					 CCS811_MODE_IAQ_1SEC);
+}
+
+static void ccs811_set_wakeup(struct ccs811_data *data, bool enable)
+{
+	if (!data->wakeup_gpio)
+		return;
+
+	gpiod_set_value(data->wakeup_gpio, enable);
+
+	if (enable)
+		usleep_range(50, 60);
+	else
+		usleep_range(20, 30);
+}
+
+static int ccs811_get_measurement(struct ccs811_data *data)
+{
+	int ret, tries = 11;
+
+	ccs811_set_wakeup(data, true);
+
+	/* Maximum waiting time: 1s, as measurements are made every second */
+	while (tries-- > 0) {
+		ret = i2c_smbus_read_byte_data(data->client, CCS811_STATUS);
+		if (ret < 0)
+			return ret;
+
+		if ((ret & CCS811_STATUS_DATA_READY) || tries == 0)
+			break;
+		msleep(100);
+	}
+	if (!(ret & CCS811_STATUS_DATA_READY))
+		return -EIO;
+
+	ret = i2c_smbus_read_i2c_block_data(data->client,
+					    CCS811_ALG_RESULT_DATA, 8,
+					    (char *)&data->buffer);
+	ccs811_set_wakeup(data, false);
+
+	return ret;
+}
+
+static int ccs811_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct ccs811_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+		mutex_lock(&data->lock);
+		ret = ccs811_get_measurement(data);
+		if (ret < 0) {
+			mutex_unlock(&data->lock);
+			iio_device_release_direct_mode(indio_dev);
+			return ret;
+		}
+
+		switch (chan->type) {
+		case IIO_VOLTAGE:
+			*val = be16_to_cpu(data->buffer.raw_data) &
+					   CCS811_VOLTAGE_MASK;
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_CURRENT:
+			*val = be16_to_cpu(data->buffer.raw_data) >> 10;
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_CONCENTRATION:
+			switch (chan->channel2) {
+			case IIO_MOD_CO2:
+				*val = be16_to_cpu(data->buffer.co2);
+				ret =  IIO_VAL_INT;
+				break;
+			case IIO_MOD_VOC:
+				*val = be16_to_cpu(data->buffer.voc);
+				ret = IIO_VAL_INT;
+				break;
+			default:
+				ret = -EINVAL;
+			}
+			break;
+		default:
+			ret = -EINVAL;
+		}
+		mutex_unlock(&data->lock);
+		iio_device_release_direct_mode(indio_dev);
+
+		return ret;
+
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_VOLTAGE:
+			*val = 1;
+			*val2 = 612903;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_CURRENT:
+			*val = 0;
+			*val2 = 1000;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_CONCENTRATION:
+			switch (chan->channel2) {
+			case IIO_MOD_CO2:
+				*val = 0;
+				*val2 = 100;
+				return IIO_VAL_INT_PLUS_MICRO;
+			case IIO_MOD_VOC:
+				*val = 0;
+				*val2 = 100;
+				return IIO_VAL_INT_PLUS_NANO;
+			default:
+				return -EINVAL;
+			}
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ccs811_info = {
+	.read_raw = ccs811_read_raw,
+};
+
+static int ccs811_set_trigger_state(struct iio_trigger *trig,
+				    bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct ccs811_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(data->client, CCS811_MEAS_MODE);
+	if (ret < 0)
+		return ret;
+
+	if (state)
+		ret |= CCS811_MEAS_MODE_INTERRUPT;
+	else
+		ret &= ~CCS811_MEAS_MODE_INTERRUPT;
+
+	data->drdy_trig_on = state;
+
+	return i2c_smbus_write_byte_data(data->client, CCS811_MEAS_MODE, ret);
+}
+
+static const struct iio_trigger_ops ccs811_trigger_ops = {
+	.set_trigger_state = ccs811_set_trigger_state,
+};
+
+static irqreturn_t ccs811_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct ccs811_data *data = iio_priv(indio_dev);
+	struct i2c_client *client = data->client;
+	int ret;
+
+	ret = i2c_smbus_read_i2c_block_data(client, CCS811_ALG_RESULT_DATA,
+					    sizeof(data->scan.channels),
+					    (u8 *)data->scan.channels);
+	if (ret != 4) {
+		dev_err(&client->dev, "cannot read sensor data\n");
+		goto err;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
+					   iio_get_time_ns(indio_dev));
+
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t ccs811_data_rdy_trigger_poll(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct ccs811_data *data = iio_priv(indio_dev);
+
+	if (data->drdy_trig_on)
+		iio_trigger_poll(data->drdy_trig);
+
+	return IRQ_HANDLED;
+}
+
+static int ccs811_reset(struct i2c_client *client)
+{
+	struct gpio_desc *reset_gpio;
+	int ret;
+
+	reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
+					     GPIOD_OUT_LOW);
+	if (IS_ERR(reset_gpio))
+		return PTR_ERR(reset_gpio);
+
+	/* Try to reset using nRESET pin if available else do SW reset */
+	if (reset_gpio) {
+		gpiod_set_value(reset_gpio, 1);
+		usleep_range(20, 30);
+		gpiod_set_value(reset_gpio, 0);
+	} else {
+		/*
+		 * As per the datasheet, this sequence of values needs to be
+		 * written to the SW_RESET register for triggering the soft
+		 * reset in the device and placing it in boot mode.
+		 */
+		static const u8 reset_seq[] = {
+			0x11, 0xE5, 0x72, 0x8A,
+		};
+
+		ret = i2c_smbus_write_i2c_block_data(client, CCS811_SW_RESET,
+					     sizeof(reset_seq), reset_seq);
+		if (ret < 0) {
+			dev_err(&client->dev, "Failed to reset sensor\n");
+			return ret;
+		}
+	}
+
+	/* tSTART delay required after reset */
+	usleep_range(1000, 2000);
+
+	return 0;
+}
+
+static int ccs811_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct ccs811_data *data;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WRITE_BYTE
+				     | I2C_FUNC_SMBUS_BYTE_DATA
+				     | I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+		return -EOPNOTSUPP;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	data->wakeup_gpio = devm_gpiod_get_optional(&client->dev, "wakeup",
+						    GPIOD_OUT_HIGH);
+	if (IS_ERR(data->wakeup_gpio))
+		return PTR_ERR(data->wakeup_gpio);
+
+	ccs811_set_wakeup(data, true);
+
+	ret = ccs811_reset(client);
+	if (ret) {
+		ccs811_set_wakeup(data, false);
+		return ret;
+	}
+
+	/* Check hardware id (should be 0x81 for this family of devices) */
+	ret = i2c_smbus_read_byte_data(client, CCS811_HW_ID);
+	if (ret < 0) {
+		ccs811_set_wakeup(data, false);
+		return ret;
+	}
+
+	if (ret != CCS811_HW_ID_VALUE) {
+		dev_err(&client->dev, "hardware id doesn't match CCS81x\n");
+		ccs811_set_wakeup(data, false);
+		return -ENODEV;
+	}
+
+	ret = i2c_smbus_read_byte_data(client, CCS811_HW_VERSION);
+	if (ret < 0) {
+		ccs811_set_wakeup(data, false);
+		return ret;
+	}
+
+	if ((ret & CCS811_HW_VERSION_MASK) != CCS811_HW_VERSION_VALUE) {
+		dev_err(&client->dev, "no CCS811 sensor\n");
+		ccs811_set_wakeup(data, false);
+		return -ENODEV;
+	}
+
+	ret = ccs811_setup(client);
+	if (ret < 0) {
+		ccs811_set_wakeup(data, false);
+		return ret;
+	}
+
+	ccs811_set_wakeup(data, false);
+
+	mutex_init(&data->lock);
+
+	indio_dev->name = id->name;
+	indio_dev->info = &ccs811_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	indio_dev->channels = ccs811_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ccs811_channels);
+
+	if (client->irq > 0) {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+						ccs811_data_rdy_trigger_poll,
+						NULL,
+						IRQF_TRIGGER_FALLING |
+						IRQF_ONESHOT,
+						"ccs811_irq", indio_dev);
+		if (ret) {
+			dev_err(&client->dev, "irq request error %d\n", -ret);
+			goto err_poweroff;
+		}
+
+		data->drdy_trig = devm_iio_trigger_alloc(&client->dev,
+							 "%s-dev%d",
+							 indio_dev->name,
+							 iio_device_id(indio_dev));
+		if (!data->drdy_trig) {
+			ret = -ENOMEM;
+			goto err_poweroff;
+		}
+
+		data->drdy_trig->ops = &ccs811_trigger_ops;
+		iio_trigger_set_drvdata(data->drdy_trig, indio_dev);
+		ret = iio_trigger_register(data->drdy_trig);
+		if (ret)
+			goto err_poweroff;
+
+		indio_dev->trig = iio_trigger_get(data->drdy_trig);
+	}
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 ccs811_trigger_handler, NULL);
+
+	if (ret < 0) {
+		dev_err(&client->dev, "triggered buffer setup failed\n");
+		goto err_trigger_unregister;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to register iio device\n");
+		goto err_buffer_cleanup;
+	}
+	return 0;
+
+err_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+err_trigger_unregister:
+	if (data->drdy_trig)
+		iio_trigger_unregister(data->drdy_trig);
+err_poweroff:
+	i2c_smbus_write_byte_data(client, CCS811_MEAS_MODE, CCS811_MODE_IDLE);
+
+	return ret;
+}
+
+static void ccs811_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct ccs811_data *data = iio_priv(indio_dev);
+	int ret;
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	if (data->drdy_trig)
+		iio_trigger_unregister(data->drdy_trig);
+
+	ret = i2c_smbus_write_byte_data(client, CCS811_MEAS_MODE,
+					CCS811_MODE_IDLE);
+	if (ret)
+		dev_warn(&client->dev, "Failed to power down device (%pe)\n",
+			 ERR_PTR(ret));
+}
+
+static const struct i2c_device_id ccs811_id[] = {
+	{"ccs811", 0},
+	{	}
+};
+MODULE_DEVICE_TABLE(i2c, ccs811_id);
+
+static const struct of_device_id ccs811_dt_ids[] = {
+	{ .compatible = "ams,ccs811" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ccs811_dt_ids);
+
+static struct i2c_driver ccs811_driver = {
+	.driver = {
+		.name = "ccs811",
+		.of_match_table = ccs811_dt_ids,
+	},
+	.probe = ccs811_probe,
+	.remove = ccs811_remove,
+	.id_table = ccs811_id,
+};
+module_i2c_driver(ccs811_driver);
+
+MODULE_AUTHOR("Narcisa Vasile <narcisaanamaria12@gmail.com>");
+MODULE_DESCRIPTION("CCS811 volatile organic compounds sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/pms7003.c b/drivers/iio/chemical/pms7003.c
new file mode 100644
index 000000000..e9857d93b
--- /dev/null
+++ b/drivers/iio/chemical/pms7003.c
@@ -0,0 +1,351 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Plantower PMS7003 particulate matter sensor driver
+ *
+ * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com>
+ */
+
+#include <asm/unaligned.h>
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/serdev.h>
+
+#define PMS7003_DRIVER_NAME "pms7003"
+
+#define PMS7003_MAGIC 0x424d
+/* last 2 data bytes hold frame checksum */
+#define PMS7003_MAX_DATA_LENGTH 28
+#define PMS7003_CHECKSUM_LENGTH 2
+#define PMS7003_PM10_OFFSET 10
+#define PMS7003_PM2P5_OFFSET 8
+#define PMS7003_PM1_OFFSET 6
+
+#define PMS7003_TIMEOUT msecs_to_jiffies(6000)
+#define PMS7003_CMD_LENGTH 7
+#define PMS7003_PM_MAX 1000
+#define PMS7003_PM_MIN 0
+
+enum {
+	PM1,
+	PM2P5,
+	PM10,
+};
+
+enum pms7003_cmd {
+	CMD_WAKEUP,
+	CMD_ENTER_PASSIVE_MODE,
+	CMD_READ_PASSIVE,
+	CMD_SLEEP,
+};
+
+/*
+ * commands have following format:
+ *
+ * +------+------+-----+------+-----+-----------+-----------+
+ * | 0x42 | 0x4d | cmd | 0x00 | arg | cksum msb | cksum lsb |
+ * +------+------+-----+------+-----+-----------+-----------+
+ */
+static const u8 pms7003_cmd_tbl[][PMS7003_CMD_LENGTH] = {
+	[CMD_WAKEUP] = { 0x42, 0x4d, 0xe4, 0x00, 0x01, 0x01, 0x74 },
+	[CMD_ENTER_PASSIVE_MODE] = { 0x42, 0x4d, 0xe1, 0x00, 0x00, 0x01, 0x70 },
+	[CMD_READ_PASSIVE] = { 0x42, 0x4d, 0xe2, 0x00, 0x00, 0x01, 0x71 },
+	[CMD_SLEEP] = { 0x42, 0x4d, 0xe4, 0x00, 0x00, 0x01, 0x73 },
+};
+
+struct pms7003_frame {
+	u8 data[PMS7003_MAX_DATA_LENGTH];
+	u16 expected_length;
+	u16 length;
+};
+
+struct pms7003_state {
+	struct serdev_device *serdev;
+	struct pms7003_frame frame;
+	struct completion frame_ready;
+	struct mutex lock; /* must be held whenever state gets touched */
+	/* Used to construct scan to push to the IIO buffer */
+	struct {
+		u16 data[3]; /* PM1, PM2P5, PM10 */
+		s64 ts;
+	} scan;
+};
+
+static int pms7003_do_cmd(struct pms7003_state *state, enum pms7003_cmd cmd)
+{
+	int ret;
+
+	ret = serdev_device_write(state->serdev, pms7003_cmd_tbl[cmd],
+				  PMS7003_CMD_LENGTH, PMS7003_TIMEOUT);
+	if (ret < PMS7003_CMD_LENGTH)
+		return ret < 0 ? ret : -EIO;
+
+	ret = wait_for_completion_interruptible_timeout(&state->frame_ready,
+							PMS7003_TIMEOUT);
+	if (!ret)
+		ret = -ETIMEDOUT;
+
+	return ret < 0 ? ret : 0;
+}
+
+static u16 pms7003_get_pm(const u8 *data)
+{
+	return clamp_val(get_unaligned_be16(data),
+			 PMS7003_PM_MIN, PMS7003_PM_MAX);
+}
+
+static irqreturn_t pms7003_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct pms7003_state *state = iio_priv(indio_dev);
+	struct pms7003_frame *frame = &state->frame;
+	int ret;
+
+	mutex_lock(&state->lock);
+	ret = pms7003_do_cmd(state, CMD_READ_PASSIVE);
+	if (ret) {
+		mutex_unlock(&state->lock);
+		goto err;
+	}
+
+	state->scan.data[PM1] =
+		pms7003_get_pm(frame->data + PMS7003_PM1_OFFSET);
+	state->scan.data[PM2P5] =
+		pms7003_get_pm(frame->data + PMS7003_PM2P5_OFFSET);
+	state->scan.data[PM10] =
+		pms7003_get_pm(frame->data + PMS7003_PM10_OFFSET);
+	mutex_unlock(&state->lock);
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &state->scan,
+					   iio_get_time_ns(indio_dev));
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int pms7003_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2, long mask)
+{
+	struct pms7003_state *state = iio_priv(indio_dev);
+	struct pms7003_frame *frame = &state->frame;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_MASSCONCENTRATION:
+			mutex_lock(&state->lock);
+			ret = pms7003_do_cmd(state, CMD_READ_PASSIVE);
+			if (ret) {
+				mutex_unlock(&state->lock);
+				return ret;
+			}
+
+			*val = pms7003_get_pm(frame->data + chan->address);
+			mutex_unlock(&state->lock);
+
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info pms7003_info = {
+	.read_raw = pms7003_read_raw,
+};
+
+#define PMS7003_CHAN(_index, _mod, _addr) { \
+	.type = IIO_MASSCONCENTRATION, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## _mod, \
+	.address = _addr, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+	.scan_index = _index, \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = 10, \
+		.storagebits = 16, \
+		.endianness = IIO_CPU, \
+	}, \
+}
+
+static const struct iio_chan_spec pms7003_channels[] = {
+	PMS7003_CHAN(0, PM1, PMS7003_PM1_OFFSET),
+	PMS7003_CHAN(1, PM2P5, PMS7003_PM2P5_OFFSET),
+	PMS7003_CHAN(2, PM10, PMS7003_PM10_OFFSET),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static u16 pms7003_calc_checksum(struct pms7003_frame *frame)
+{
+	u16 checksum = (PMS7003_MAGIC >> 8) + (u8)(PMS7003_MAGIC & 0xff) +
+		       (frame->length >> 8) + (u8)frame->length;
+	int i;
+
+	for (i = 0; i < frame->length - PMS7003_CHECKSUM_LENGTH; i++)
+		checksum += frame->data[i];
+
+	return checksum;
+}
+
+static bool pms7003_frame_is_okay(struct pms7003_frame *frame)
+{
+	int offset = frame->length - PMS7003_CHECKSUM_LENGTH;
+	u16 checksum = get_unaligned_be16(frame->data + offset);
+
+	return checksum == pms7003_calc_checksum(frame);
+}
+
+static int pms7003_receive_buf(struct serdev_device *serdev,
+			       const unsigned char *buf, size_t size)
+{
+	struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev);
+	struct pms7003_state *state = iio_priv(indio_dev);
+	struct pms7003_frame *frame = &state->frame;
+	int num;
+
+	if (!frame->expected_length) {
+		u16 magic;
+
+		/* wait for SOF and data length */
+		if (size < 4)
+			return 0;
+
+		magic = get_unaligned_be16(buf);
+		if (magic != PMS7003_MAGIC)
+			return 2;
+
+		num = get_unaligned_be16(buf + 2);
+		if (num <= PMS7003_MAX_DATA_LENGTH) {
+			frame->expected_length = num;
+			frame->length = 0;
+		}
+
+		return 4;
+	}
+
+	num = min(size, (size_t)(frame->expected_length - frame->length));
+	memcpy(frame->data + frame->length, buf, num);
+	frame->length += num;
+
+	if (frame->length == frame->expected_length) {
+		if (pms7003_frame_is_okay(frame))
+			complete(&state->frame_ready);
+
+		frame->expected_length = 0;
+	}
+
+	return num;
+}
+
+static const struct serdev_device_ops pms7003_serdev_ops = {
+	.receive_buf = pms7003_receive_buf,
+	.write_wakeup = serdev_device_write_wakeup,
+};
+
+static void pms7003_stop(void *data)
+{
+	struct pms7003_state *state = data;
+
+	pms7003_do_cmd(state, CMD_SLEEP);
+}
+
+static const unsigned long pms7003_scan_masks[] = { 0x07, 0x00 };
+
+static int pms7003_probe(struct serdev_device *serdev)
+{
+	struct pms7003_state *state;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&serdev->dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	state = iio_priv(indio_dev);
+	serdev_device_set_drvdata(serdev, indio_dev);
+	state->serdev = serdev;
+	indio_dev->info = &pms7003_info;
+	indio_dev->name = PMS7003_DRIVER_NAME;
+	indio_dev->channels = pms7003_channels;
+	indio_dev->num_channels = ARRAY_SIZE(pms7003_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->available_scan_masks = pms7003_scan_masks;
+
+	mutex_init(&state->lock);
+	init_completion(&state->frame_ready);
+
+	serdev_device_set_client_ops(serdev, &pms7003_serdev_ops);
+	ret = devm_serdev_device_open(&serdev->dev, serdev);
+	if (ret)
+		return ret;
+
+	serdev_device_set_baudrate(serdev, 9600);
+	serdev_device_set_flow_control(serdev, false);
+
+	ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
+	if (ret)
+		return ret;
+
+	ret = pms7003_do_cmd(state, CMD_WAKEUP);
+	if (ret) {
+		dev_err(&serdev->dev, "failed to wakeup sensor\n");
+		return ret;
+	}
+
+	ret = pms7003_do_cmd(state, CMD_ENTER_PASSIVE_MODE);
+	if (ret) {
+		dev_err(&serdev->dev, "failed to enter passive mode\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(&serdev->dev, pms7003_stop, state);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(&serdev->dev, indio_dev, NULL,
+					      pms7003_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&serdev->dev, indio_dev);
+}
+
+static const struct of_device_id pms7003_of_match[] = {
+	{ .compatible = "plantower,pms1003" },
+	{ .compatible = "plantower,pms3003" },
+	{ .compatible = "plantower,pms5003" },
+	{ .compatible = "plantower,pms6003" },
+	{ .compatible = "plantower,pms7003" },
+	{ .compatible = "plantower,pmsa003" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pms7003_of_match);
+
+static struct serdev_device_driver pms7003_driver = {
+	.driver = {
+		.name = PMS7003_DRIVER_NAME,
+		.of_match_table = pms7003_of_match,
+	},
+	.probe = pms7003_probe,
+};
+module_serdev_device_driver(pms7003_driver);
+
+MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>");
+MODULE_DESCRIPTION("Plantower PMS7003 particulate matter sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/scd30.h b/drivers/iio/chemical/scd30.h
new file mode 100644
index 000000000..1ac9f3f79
--- /dev/null
+++ b/drivers/iio/chemical/scd30.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SCD30_H
+#define _SCD30_H
+
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/pm.h>
+#include <linux/regulator/consumer.h>
+#include <linux/types.h>
+
+struct scd30_state;
+
+enum scd30_cmd {
+	/* start continuous measurement with pressure compensation */
+	CMD_START_MEAS,
+	/* stop continuous measurement */
+	CMD_STOP_MEAS,
+	/* set/get measurement interval */
+	CMD_MEAS_INTERVAL,
+	/* check whether new measurement is ready */
+	CMD_MEAS_READY,
+	/* get measurement */
+	CMD_READ_MEAS,
+	/* turn on/off automatic self calibration */
+	CMD_ASC,
+	/* set/get forced recalibration value */
+	CMD_FRC,
+	/* set/get temperature offset */
+	CMD_TEMP_OFFSET,
+	/* get firmware version */
+	CMD_FW_VERSION,
+	/* reset sensor */
+	CMD_RESET,
+	/*
+	 * Command for altitude compensation was omitted intentionally because
+	 * the same can be achieved by means of CMD_START_MEAS which takes
+	 * pressure above the sea level as an argument.
+	 */
+};
+
+#define SCD30_MEAS_COUNT 3
+
+typedef int (*scd30_command_t)(struct scd30_state *state, enum scd30_cmd cmd, u16 arg,
+			       void *response, int size);
+
+struct scd30_state {
+	/* serialize access to the device */
+	struct mutex lock;
+	struct device *dev;
+	struct regulator *vdd;
+	struct completion meas_ready;
+	/*
+	 * priv pointer is solely for serdev driver private data. We keep it
+	 * here because driver_data inside dev has been already used for iio and
+	 * struct serdev_device doesn't have one.
+	 */
+	void *priv;
+	int irq;
+	/*
+	 * no way to retrieve current ambient pressure compensation value from
+	 * the sensor so keep one around
+	 */
+	u16 pressure_comp;
+	u16 meas_interval;
+	int meas[SCD30_MEAS_COUNT];
+
+	scd30_command_t command;
+};
+
+extern const struct dev_pm_ops scd30_pm_ops;
+
+int scd30_probe(struct device *dev, int irq, const char *name, void *priv, scd30_command_t command);
+
+#endif
diff --git a/drivers/iio/chemical/scd30_core.c b/drivers/iio/chemical/scd30_core.c
new file mode 100644
index 000000000..682fca39d
--- /dev/null
+++ b/drivers/iio/chemical/scd30_core.c
@@ -0,0 +1,766 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sensirion SCD30 carbon dioxide sensor core driver
+ *
+ * Copyright (c) 2020 Tomasz Duszynski <tomasz.duszynski@octakon.com>
+ */
+#include <linux/bits.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/types.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regulator/consumer.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#include "scd30.h"
+
+#define SCD30_PRESSURE_COMP_MIN_MBAR 700
+#define SCD30_PRESSURE_COMP_MAX_MBAR 1400
+#define SCD30_PRESSURE_COMP_DEFAULT 1013
+#define SCD30_MEAS_INTERVAL_MIN_S 2
+#define SCD30_MEAS_INTERVAL_MAX_S 1800
+#define SCD30_MEAS_INTERVAL_DEFAULT SCD30_MEAS_INTERVAL_MIN_S
+#define SCD30_FRC_MIN_PPM 400
+#define SCD30_FRC_MAX_PPM 2000
+#define SCD30_TEMP_OFFSET_MAX 655360
+#define SCD30_EXTRA_TIMEOUT_PER_S 250
+
+enum {
+	SCD30_CONC,
+	SCD30_TEMP,
+	SCD30_HR,
+};
+
+static int scd30_command_write(struct scd30_state *state, enum scd30_cmd cmd, u16 arg)
+{
+	return state->command(state, cmd, arg, NULL, 0);
+}
+
+static int scd30_command_read(struct scd30_state *state, enum scd30_cmd cmd, u16 *val)
+{
+	__be16 tmp;
+	int ret;
+
+	ret = state->command(state, cmd, 0, &tmp, sizeof(tmp));
+	*val = be16_to_cpup(&tmp);
+
+	return ret;
+}
+
+static int scd30_reset(struct scd30_state *state)
+{
+	int ret;
+	u16 val;
+
+	ret = scd30_command_write(state, CMD_RESET, 0);
+	if (ret)
+		return ret;
+
+	/* sensor boots up within 2 secs */
+	msleep(2000);
+	/*
+	 * Power-on-reset causes sensor to produce some glitch on i2c bus and
+	 * some controllers end up in error state. Try to recover by placing
+	 * any data on the bus.
+	 */
+	scd30_command_read(state, CMD_MEAS_READY, &val);
+
+	return 0;
+}
+
+/* simplified float to fixed point conversion with a scaling factor of 0.01 */
+static int scd30_float_to_fp(int float32)
+{
+	int fraction, shift,
+	    mantissa = float32 & GENMASK(22, 0),
+	    sign = (float32 & BIT(31)) ? -1 : 1,
+	    exp = (float32 & ~BIT(31)) >> 23;
+
+	/* special case 0 */
+	if (!exp && !mantissa)
+		return 0;
+
+	exp -= 127;
+	if (exp < 0) {
+		exp = -exp;
+		/* return values ranging from 1 to 99 */
+		return sign * ((((BIT(23) + mantissa) * 100) >> 23) >> exp);
+	}
+
+	/* return values starting at 100 */
+	shift = 23 - exp;
+	float32 = BIT(exp) + (mantissa >> shift);
+	fraction = mantissa & GENMASK(shift - 1, 0);
+
+	return sign * (float32 * 100 + ((fraction * 100) >> shift));
+}
+
+static int scd30_read_meas(struct scd30_state *state)
+{
+	int i, ret;
+
+	ret = state->command(state, CMD_READ_MEAS, 0, state->meas, sizeof(state->meas));
+	if (ret)
+		return ret;
+
+	be32_to_cpu_array(state->meas, (__be32 *)state->meas, ARRAY_SIZE(state->meas));
+
+	for (i = 0; i < ARRAY_SIZE(state->meas); i++)
+		state->meas[i] = scd30_float_to_fp(state->meas[i]);
+
+	/*
+	 * co2 is left unprocessed while temperature and humidity are scaled
+	 * to milli deg C and milli percent respectively.
+	 */
+	state->meas[SCD30_TEMP] *= 10;
+	state->meas[SCD30_HR] *= 10;
+
+	return 0;
+}
+
+static int scd30_wait_meas_irq(struct scd30_state *state)
+{
+	int ret, timeout;
+
+	reinit_completion(&state->meas_ready);
+	enable_irq(state->irq);
+	timeout = msecs_to_jiffies(state->meas_interval * (1000 + SCD30_EXTRA_TIMEOUT_PER_S));
+	ret = wait_for_completion_interruptible_timeout(&state->meas_ready, timeout);
+	if (ret > 0)
+		ret = 0;
+	else if (!ret)
+		ret = -ETIMEDOUT;
+
+	disable_irq(state->irq);
+
+	return ret;
+}
+
+static int scd30_wait_meas_poll(struct scd30_state *state)
+{
+	int timeout = state->meas_interval * SCD30_EXTRA_TIMEOUT_PER_S, tries = 5;
+
+	do {
+		int ret;
+		u16 val;
+
+		ret = scd30_command_read(state, CMD_MEAS_READY, &val);
+		if (ret)
+			return -EIO;
+
+		/* new measurement available */
+		if (val)
+			break;
+
+		msleep_interruptible(timeout);
+	} while (--tries);
+
+	return tries ? 0 : -ETIMEDOUT;
+}
+
+static int scd30_read_poll(struct scd30_state *state)
+{
+	int ret;
+
+	ret = scd30_wait_meas_poll(state);
+	if (ret)
+		return ret;
+
+	return scd30_read_meas(state);
+}
+
+static int scd30_read(struct scd30_state *state)
+{
+	if (state->irq > 0)
+		return scd30_wait_meas_irq(state);
+
+	return scd30_read_poll(state);
+}
+
+static int scd30_read_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct scd30_state *state = iio_priv(indio_dev);
+	int ret = -EINVAL;
+	u16 tmp;
+
+	mutex_lock(&state->lock);
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
+		if (chan->output) {
+			*val = state->pressure_comp;
+			ret = IIO_VAL_INT;
+			break;
+		}
+
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			break;
+
+		ret = scd30_read(state);
+		if (ret) {
+			iio_device_release_direct_mode(indio_dev);
+			break;
+		}
+
+		*val = state->meas[chan->address];
+		iio_device_release_direct_mode(indio_dev);
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = 1;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = scd30_command_read(state, CMD_MEAS_INTERVAL, &tmp);
+		if (ret)
+			break;
+
+		*val = 0;
+		*val2 = 1000000000 / tmp;
+		ret = IIO_VAL_INT_PLUS_NANO;
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		ret = scd30_command_read(state, CMD_TEMP_OFFSET, &tmp);
+		if (ret)
+			break;
+
+		*val = tmp;
+		ret = IIO_VAL_INT;
+		break;
+	}
+	mutex_unlock(&state->lock);
+
+	return ret;
+}
+
+static int scd30_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			   int val, int val2, long mask)
+{
+	struct scd30_state *state = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	mutex_lock(&state->lock);
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val)
+			break;
+
+		val = 1000000000 / val2;
+		if (val < SCD30_MEAS_INTERVAL_MIN_S || val > SCD30_MEAS_INTERVAL_MAX_S)
+			break;
+
+		ret = scd30_command_write(state, CMD_MEAS_INTERVAL, val);
+		if (ret)
+			break;
+
+		state->meas_interval = val;
+		break;
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_PRESSURE:
+			if (val < SCD30_PRESSURE_COMP_MIN_MBAR ||
+			    val > SCD30_PRESSURE_COMP_MAX_MBAR)
+				break;
+
+			ret = scd30_command_write(state, CMD_START_MEAS, val);
+			if (ret)
+				break;
+
+			state->pressure_comp = val;
+			break;
+		default:
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (val < 0 || val > SCD30_TEMP_OFFSET_MAX)
+			break;
+		/*
+		 * Manufacturer does not explicitly specify min/max sensible
+		 * values hence check is omitted for simplicity.
+		 */
+		ret = scd30_command_write(state, CMD_TEMP_OFFSET / 10, val);
+	}
+	mutex_unlock(&state->lock);
+
+	return ret;
+}
+
+static int scd30_write_raw_get_fmt(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+				   long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_CALIBBIAS:
+		return IIO_VAL_INT;
+	}
+
+	return -EINVAL;
+}
+
+static const int scd30_pressure_raw_available[] = {
+	SCD30_PRESSURE_COMP_MIN_MBAR, 1, SCD30_PRESSURE_COMP_MAX_MBAR,
+};
+
+static const int scd30_temp_calibbias_available[] = {
+	0, 10, SCD30_TEMP_OFFSET_MAX,
+};
+
+static int scd30_read_avail(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+			    const int **vals, int *type, int *length, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		*vals = scd30_pressure_raw_available;
+		*type = IIO_VAL_INT;
+
+		return IIO_AVAIL_RANGE;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		*vals = scd30_temp_calibbias_available;
+		*type = IIO_VAL_INT;
+
+		return IIO_AVAIL_RANGE;
+	}
+
+	return -EINVAL;
+}
+
+static ssize_t sampling_frequency_available_show(struct device *dev, struct device_attribute *attr,
+						 char *buf)
+{
+	int i = SCD30_MEAS_INTERVAL_MIN_S;
+	ssize_t len = 0;
+
+	do {
+		len += scnprintf(buf + len, PAGE_SIZE - len, "0.%09u ", 1000000000 / i);
+		/*
+		 * Not all values fit PAGE_SIZE buffer hence print every 6th
+		 * (each frequency differs by 6s in time domain from the
+		 * adjacent). Unlisted but valid ones are still accepted.
+		 */
+		i += 6;
+	} while (i <= SCD30_MEAS_INTERVAL_MAX_S);
+
+	buf[len - 1] = '\n';
+
+	return len;
+}
+
+static ssize_t calibration_auto_enable_show(struct device *dev, struct device_attribute *attr,
+					    char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct scd30_state *state = iio_priv(indio_dev);
+	int ret;
+	u16 val;
+
+	mutex_lock(&state->lock);
+	ret = scd30_command_read(state, CMD_ASC, &val);
+	mutex_unlock(&state->lock);
+
+	return ret ?: sprintf(buf, "%d\n", val);
+}
+
+static ssize_t calibration_auto_enable_store(struct device *dev, struct device_attribute *attr,
+					     const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct scd30_state *state = iio_priv(indio_dev);
+	bool val;
+	int ret;
+
+	ret = kstrtobool(buf, &val);
+	if (ret)
+		return ret;
+
+	mutex_lock(&state->lock);
+	ret = scd30_command_write(state, CMD_ASC, val);
+	mutex_unlock(&state->lock);
+
+	return ret ?: len;
+}
+
+static ssize_t calibration_forced_value_show(struct device *dev, struct device_attribute *attr,
+					     char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct scd30_state *state = iio_priv(indio_dev);
+	int ret;
+	u16 val;
+
+	mutex_lock(&state->lock);
+	ret = scd30_command_read(state, CMD_FRC, &val);
+	mutex_unlock(&state->lock);
+
+	return ret ?: sprintf(buf, "%d\n", val);
+}
+
+static ssize_t calibration_forced_value_store(struct device *dev, struct device_attribute *attr,
+					      const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct scd30_state *state = iio_priv(indio_dev);
+	int ret;
+	u16 val;
+
+	ret = kstrtou16(buf, 0, &val);
+	if (ret)
+		return ret;
+
+	if (val < SCD30_FRC_MIN_PPM || val > SCD30_FRC_MAX_PPM)
+		return -EINVAL;
+
+	mutex_lock(&state->lock);
+	ret = scd30_command_write(state, CMD_FRC, val);
+	mutex_unlock(&state->lock);
+
+	return ret ?: len;
+}
+
+static IIO_DEVICE_ATTR_RO(sampling_frequency_available, 0);
+static IIO_DEVICE_ATTR_RW(calibration_auto_enable, 0);
+static IIO_DEVICE_ATTR_RW(calibration_forced_value, 0);
+
+static struct attribute *scd30_attrs[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_calibration_auto_enable.dev_attr.attr,
+	&iio_dev_attr_calibration_forced_value.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group scd30_attr_group = {
+	.attrs = scd30_attrs,
+};
+
+static const struct iio_info scd30_info = {
+	.attrs = &scd30_attr_group,
+	.read_raw = scd30_read_raw,
+	.write_raw = scd30_write_raw,
+	.write_raw_get_fmt = scd30_write_raw_get_fmt,
+	.read_avail = scd30_read_avail,
+};
+
+#define SCD30_CHAN_SCAN_TYPE(_sign, _realbits) .scan_type = { \
+	.sign = _sign, \
+	.realbits = _realbits, \
+	.storagebits = 32, \
+	.endianness = IIO_CPU, \
+}
+
+static const struct iio_chan_spec scd30_channels[] = {
+	{
+		/*
+		 * this channel is special in a sense we are pretending that
+		 * sensor is able to change measurement chamber pressure but in
+		 * fact we're just setting pressure compensation value
+		 */
+		.type = IIO_PRESSURE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW),
+		.output = 1,
+		.scan_index = -1,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_CO2,
+		.address = SCD30_CONC,
+		.scan_index = SCD30_CONC,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.modified = 1,
+
+		SCD30_CHAN_SCAN_TYPE('u', 20),
+	},
+	{
+		.type = IIO_TEMP,
+		.address = SCD30_TEMP,
+		.scan_index = SCD30_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED) |
+				      BIT(IIO_CHAN_INFO_CALIBBIAS),
+		.info_mask_separate_available = BIT(IIO_CHAN_INFO_CALIBBIAS),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+
+		SCD30_CHAN_SCAN_TYPE('s', 18),
+	},
+	{
+		.type = IIO_HUMIDITYRELATIVE,
+		.address = SCD30_HR,
+		.scan_index = SCD30_HR,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+
+		SCD30_CHAN_SCAN_TYPE('u', 17),
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static int scd30_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct scd30_state *state  = iio_priv(indio_dev);
+	int ret;
+
+	ret = scd30_command_write(state, CMD_STOP_MEAS, 0);
+	if (ret)
+		return ret;
+
+	return regulator_disable(state->vdd);
+}
+
+static int scd30_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct scd30_state *state = iio_priv(indio_dev);
+	int ret;
+
+	ret = regulator_enable(state->vdd);
+	if (ret)
+		return ret;
+
+	return scd30_command_write(state, CMD_START_MEAS, state->pressure_comp);
+}
+
+EXPORT_NS_SIMPLE_DEV_PM_OPS(scd30_pm_ops, scd30_suspend, scd30_resume, IIO_SCD30);
+
+static void scd30_stop_meas(void *data)
+{
+	struct scd30_state *state = data;
+
+	scd30_command_write(state, CMD_STOP_MEAS, 0);
+}
+
+static void scd30_disable_regulator(void *data)
+{
+	struct scd30_state *state = data;
+
+	regulator_disable(state->vdd);
+}
+
+static irqreturn_t scd30_irq_handler(int irq, void *priv)
+{
+	struct iio_dev *indio_dev = priv;
+
+	if (iio_buffer_enabled(indio_dev)) {
+		iio_trigger_poll(indio_dev->trig);
+
+		return IRQ_HANDLED;
+	}
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t scd30_irq_thread_handler(int irq, void *priv)
+{
+	struct iio_dev *indio_dev = priv;
+	struct scd30_state *state = iio_priv(indio_dev);
+	int ret;
+
+	ret = scd30_read_meas(state);
+	if (ret)
+		goto out;
+
+	complete_all(&state->meas_ready);
+out:
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t scd30_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct scd30_state *state = iio_priv(indio_dev);
+	struct {
+		int data[SCD30_MEAS_COUNT];
+		s64 ts __aligned(8);
+	} scan;
+	int ret;
+
+	mutex_lock(&state->lock);
+	if (!iio_trigger_using_own(indio_dev))
+		ret = scd30_read_poll(state);
+	else
+		ret = scd30_read_meas(state);
+	memset(&scan, 0, sizeof(scan));
+	memcpy(scan.data, state->meas, sizeof(state->meas));
+	mutex_unlock(&state->lock);
+	if (ret)
+		goto out;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev));
+out:
+	iio_trigger_notify_done(indio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+static int scd30_set_trigger_state(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct scd30_state *st = iio_priv(indio_dev);
+
+	if (state)
+		enable_irq(st->irq);
+	else
+		disable_irq(st->irq);
+
+	return 0;
+}
+
+static const struct iio_trigger_ops scd30_trigger_ops = {
+	.set_trigger_state = scd30_set_trigger_state,
+	.validate_device = iio_trigger_validate_own_device,
+};
+
+static int scd30_setup_trigger(struct iio_dev *indio_dev)
+{
+	struct scd30_state *state = iio_priv(indio_dev);
+	struct device *dev = indio_dev->dev.parent;
+	struct iio_trigger *trig;
+	int ret;
+
+	trig = devm_iio_trigger_alloc(dev, "%s-dev%d", indio_dev->name,
+				      iio_device_id(indio_dev));
+	if (!trig) {
+		dev_err(dev, "failed to allocate trigger\n");
+		return -ENOMEM;
+	}
+
+	trig->ops = &scd30_trigger_ops;
+	iio_trigger_set_drvdata(trig, indio_dev);
+
+	ret = devm_iio_trigger_register(dev, trig);
+	if (ret)
+		return ret;
+
+	indio_dev->trig = iio_trigger_get(trig);
+
+	/*
+	 * Interrupt is enabled just before taking a fresh measurement
+	 * and disabled afterwards. This means we need to ensure it is not
+	 * enabled here to keep calls to enable/disable balanced.
+	 */
+	ret = devm_request_threaded_irq(dev, state->irq, scd30_irq_handler,
+					scd30_irq_thread_handler,
+					IRQF_TRIGGER_HIGH | IRQF_ONESHOT |
+					IRQF_NO_AUTOEN,
+					indio_dev->name, indio_dev);
+	if (ret)
+		dev_err(dev, "failed to request irq\n");
+
+	return ret;
+}
+
+int scd30_probe(struct device *dev, int irq, const char *name, void *priv,
+		scd30_command_t command)
+{
+	static const unsigned long scd30_scan_masks[] = { 0x07, 0x00 };
+	struct scd30_state *state;
+	struct iio_dev *indio_dev;
+	int ret;
+	u16 val;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	state = iio_priv(indio_dev);
+	state->dev = dev;
+	state->priv = priv;
+	state->irq = irq;
+	state->pressure_comp = SCD30_PRESSURE_COMP_DEFAULT;
+	state->meas_interval = SCD30_MEAS_INTERVAL_DEFAULT;
+	state->command = command;
+	mutex_init(&state->lock);
+	init_completion(&state->meas_ready);
+
+	dev_set_drvdata(dev, indio_dev);
+
+	indio_dev->info = &scd30_info;
+	indio_dev->name = name;
+	indio_dev->channels = scd30_channels;
+	indio_dev->num_channels = ARRAY_SIZE(scd30_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->available_scan_masks = scd30_scan_masks;
+
+	state->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(state->vdd))
+		return dev_err_probe(dev, PTR_ERR(state->vdd), "failed to get regulator\n");
+
+	ret = regulator_enable(state->vdd);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, scd30_disable_regulator, state);
+	if (ret)
+		return ret;
+
+	ret = scd30_reset(state);
+	if (ret) {
+		dev_err(dev, "failed to reset device: %d\n", ret);
+		return ret;
+	}
+
+	if (state->irq > 0) {
+		ret = scd30_setup_trigger(indio_dev);
+		if (ret) {
+			dev_err(dev, "failed to setup trigger: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, scd30_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	ret = scd30_command_read(state, CMD_FW_VERSION, &val);
+	if (ret) {
+		dev_err(dev, "failed to read firmware version: %d\n", ret);
+		return ret;
+	}
+	dev_info(dev, "firmware version: %d.%d\n", val >> 8, (char)val);
+
+	ret = scd30_command_write(state, CMD_MEAS_INTERVAL, state->meas_interval);
+	if (ret) {
+		dev_err(dev, "failed to set measurement interval: %d\n", ret);
+		return ret;
+	}
+
+	ret = scd30_command_write(state, CMD_START_MEAS, state->pressure_comp);
+	if (ret) {
+		dev_err(dev, "failed to start measurement: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, scd30_stop_meas, state);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_NS(scd30_probe, IIO_SCD30);
+
+MODULE_AUTHOR("Tomasz Duszynski <tomasz.duszynski@octakon.com>");
+MODULE_DESCRIPTION("Sensirion SCD30 carbon dioxide sensor core driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/scd30_i2c.c b/drivers/iio/chemical/scd30_i2c.c
new file mode 100644
index 000000000..bae479a47
--- /dev/null
+++ b/drivers/iio/chemical/scd30_i2c.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sensirion SCD30 carbon dioxide sensor i2c driver
+ *
+ * Copyright (c) 2020 Tomasz Duszynski <tomasz.duszynski@octakon.com>
+ *
+ * I2C slave address: 0x61
+ */
+#include <linux/crc8.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <asm/unaligned.h>
+
+#include "scd30.h"
+
+#define SCD30_I2C_MAX_BUF_SIZE 18
+#define SCD30_I2C_CRC8_POLYNOMIAL 0x31
+
+static u16 scd30_i2c_cmd_lookup_tbl[] = {
+	[CMD_START_MEAS] = 0x0010,
+	[CMD_STOP_MEAS] = 0x0104,
+	[CMD_MEAS_INTERVAL] = 0x4600,
+	[CMD_MEAS_READY] = 0x0202,
+	[CMD_READ_MEAS] = 0x0300,
+	[CMD_ASC] = 0x5306,
+	[CMD_FRC] = 0x5204,
+	[CMD_TEMP_OFFSET] = 0x5403,
+	[CMD_FW_VERSION] = 0xd100,
+	[CMD_RESET] = 0xd304,
+};
+
+DECLARE_CRC8_TABLE(scd30_i2c_crc8_tbl);
+
+static int scd30_i2c_xfer(struct scd30_state *state, char *txbuf, int txsize,
+			  char *rxbuf, int rxsize)
+{
+	struct i2c_client *client = to_i2c_client(state->dev);
+	int ret;
+
+	/*
+	 * repeated start is not supported hence instead of sending two i2c
+	 * messages in a row we send one by one
+	 */
+	ret = i2c_master_send(client, txbuf, txsize);
+	if (ret < 0)
+		return ret;
+	if (ret != txsize)
+		return -EIO;
+
+	if (!rxbuf)
+		return 0;
+
+	ret = i2c_master_recv(client, rxbuf, rxsize);
+	if (ret < 0)
+		return ret;
+	if (ret != rxsize)
+		return -EIO;
+
+	return 0;
+}
+
+static int scd30_i2c_command(struct scd30_state *state, enum scd30_cmd cmd, u16 arg,
+			     void *response, int size)
+{
+	char buf[SCD30_I2C_MAX_BUF_SIZE];
+	char *rsp = response;
+	int i, ret;
+	char crc;
+
+	put_unaligned_be16(scd30_i2c_cmd_lookup_tbl[cmd], buf);
+	i = 2;
+
+	if (rsp) {
+		/* each two bytes are followed by a crc8 */
+		size += size / 2;
+	} else {
+		put_unaligned_be16(arg, buf + i);
+		crc = crc8(scd30_i2c_crc8_tbl, buf + i, 2, CRC8_INIT_VALUE);
+		i += 2;
+		buf[i] = crc;
+		i += 1;
+
+		/* commands below don't take an argument */
+		if ((cmd == CMD_STOP_MEAS) || (cmd == CMD_RESET))
+			i -= 3;
+	}
+
+	ret = scd30_i2c_xfer(state, buf, i, buf, size);
+	if (ret)
+		return ret;
+
+	/* validate received data and strip off crc bytes */
+	for (i = 0; i < size; i += 3) {
+		crc = crc8(scd30_i2c_crc8_tbl, buf + i, 2, CRC8_INIT_VALUE);
+		if (crc != buf[i + 2]) {
+			dev_err(state->dev, "data integrity check failed\n");
+			return -EIO;
+		}
+
+		*rsp++ = buf[i];
+		*rsp++ = buf[i + 1];
+	}
+
+	return 0;
+}
+
+static int scd30_i2c_probe(struct i2c_client *client)
+{
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -EOPNOTSUPP;
+
+	crc8_populate_msb(scd30_i2c_crc8_tbl, SCD30_I2C_CRC8_POLYNOMIAL);
+
+	return scd30_probe(&client->dev, client->irq, client->name, NULL, scd30_i2c_command);
+}
+
+static const struct of_device_id scd30_i2c_of_match[] = {
+	{ .compatible = "sensirion,scd30" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, scd30_i2c_of_match);
+
+static struct i2c_driver scd30_i2c_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = scd30_i2c_of_match,
+		.pm = pm_sleep_ptr(&scd30_pm_ops),
+	},
+	.probe_new = scd30_i2c_probe,
+};
+module_i2c_driver(scd30_i2c_driver);
+
+MODULE_AUTHOR("Tomasz Duszynski <tomasz.duszynski@octakon.com>");
+MODULE_DESCRIPTION("Sensirion SCD30 carbon dioxide sensor i2c driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_SCD30);
diff --git a/drivers/iio/chemical/scd30_serial.c b/drivers/iio/chemical/scd30_serial.c
new file mode 100644
index 000000000..3c519103d
--- /dev/null
+++ b/drivers/iio/chemical/scd30_serial.c
@@ -0,0 +1,264 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sensirion SCD30 carbon dioxide sensor serial driver
+ *
+ * Copyright (c) 2020 Tomasz Duszynski <tomasz.duszynski@octakon.com>
+ */
+#include <linux/crc16.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/iio/iio.h>
+#include <linux/jiffies.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/serdev.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <asm/unaligned.h>
+
+#include "scd30.h"
+
+#define SCD30_SERDEV_ADDR 0x61
+#define SCD30_SERDEV_WRITE 0x06
+#define SCD30_SERDEV_READ 0x03
+#define SCD30_SERDEV_MAX_BUF_SIZE 17
+#define SCD30_SERDEV_RX_HEADER_SIZE 3
+#define SCD30_SERDEV_CRC_SIZE 2
+#define SCD30_SERDEV_TIMEOUT msecs_to_jiffies(200)
+
+struct scd30_serdev_priv {
+	struct completion meas_ready;
+	char *buf;
+	int num_expected;
+	int num;
+};
+
+static u16 scd30_serdev_cmd_lookup_tbl[] = {
+	[CMD_START_MEAS] = 0x0036,
+	[CMD_STOP_MEAS] = 0x0037,
+	[CMD_MEAS_INTERVAL] = 0x0025,
+	[CMD_MEAS_READY] = 0x0027,
+	[CMD_READ_MEAS] = 0x0028,
+	[CMD_ASC] = 0x003a,
+	[CMD_FRC] = 0x0039,
+	[CMD_TEMP_OFFSET] = 0x003b,
+	[CMD_FW_VERSION] = 0x0020,
+	[CMD_RESET] = 0x0034,
+};
+
+static u16 scd30_serdev_calc_crc(const char *buf, int size)
+{
+	return crc16(0xffff, buf, size);
+}
+
+static int scd30_serdev_xfer(struct scd30_state *state, char *txbuf, int txsize,
+			     char *rxbuf, int rxsize)
+{
+	struct serdev_device *serdev = to_serdev_device(state->dev);
+	struct scd30_serdev_priv *priv = state->priv;
+	int ret;
+
+	priv->buf = rxbuf;
+	priv->num_expected = rxsize;
+	priv->num = 0;
+
+	ret = serdev_device_write(serdev, txbuf, txsize, SCD30_SERDEV_TIMEOUT);
+	if (ret < 0)
+		return ret;
+	if (ret != txsize)
+		return -EIO;
+
+	ret = wait_for_completion_interruptible_timeout(&priv->meas_ready, SCD30_SERDEV_TIMEOUT);
+	if (ret < 0)
+		return ret;
+	if (!ret)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int scd30_serdev_command(struct scd30_state *state, enum scd30_cmd cmd, u16 arg,
+				void *response, int size)
+{
+	/*
+	 * Communication over serial line is based on modbus protocol (or rather
+	 * its variation called modbus over serial to be precise). Upon
+	 * receiving a request device should reply with response.
+	 *
+	 * Frame below represents a request message. Each field takes
+	 * exactly one byte.
+	 *
+	 * +------+------+-----+-----+-------+-------+-----+-----+
+	 * | dev  | op   | reg | reg | byte1 | byte0 | crc | crc |
+	 * | addr | code | msb | lsb |       |       | lsb | msb |
+	 * +------+------+-----+-----+-------+-------+-----+-----+
+	 *
+	 * The message device replies with depends on the 'op code' field from
+	 * the request. In case it was set to SCD30_SERDEV_WRITE sensor should
+	 * reply with unchanged request. Otherwise 'op code' was set to
+	 * SCD30_SERDEV_READ and response looks like the one below. As with
+	 * request, each field takes one byte.
+	 *
+	 * +------+------+--------+-------+-----+-------+-----+-----+
+	 * | dev  | op   | num of | byte0 | ... | byteN | crc | crc |
+	 * | addr | code | bytes  |       |     |       | lsb | msb |
+	 * +------+------+--------+-------+-----+-------+-----+-----+
+	 */
+	char txbuf[SCD30_SERDEV_MAX_BUF_SIZE] = { SCD30_SERDEV_ADDR },
+	     rxbuf[SCD30_SERDEV_MAX_BUF_SIZE];
+	int ret, rxsize, txsize = 2;
+	char *rsp = response;
+	u16 crc;
+
+	put_unaligned_be16(scd30_serdev_cmd_lookup_tbl[cmd], txbuf + txsize);
+	txsize += 2;
+
+	if (rsp) {
+		txbuf[1] = SCD30_SERDEV_READ;
+		if (cmd == CMD_READ_MEAS)
+			/* number of u16 words to read */
+			put_unaligned_be16(size / 2, txbuf + txsize);
+		else
+			put_unaligned_be16(0x0001, txbuf + txsize);
+		txsize += 2;
+		crc = scd30_serdev_calc_crc(txbuf, txsize);
+		put_unaligned_le16(crc, txbuf + txsize);
+		txsize += 2;
+		rxsize = SCD30_SERDEV_RX_HEADER_SIZE + size + SCD30_SERDEV_CRC_SIZE;
+	} else {
+		if ((cmd == CMD_STOP_MEAS) || (cmd == CMD_RESET))
+			arg = 0x0001;
+
+		txbuf[1] = SCD30_SERDEV_WRITE;
+		put_unaligned_be16(arg, txbuf + txsize);
+		txsize += 2;
+		crc = scd30_serdev_calc_crc(txbuf, txsize);
+		put_unaligned_le16(crc, txbuf + txsize);
+		txsize += 2;
+		rxsize = txsize;
+	}
+
+	ret = scd30_serdev_xfer(state, txbuf, txsize, rxbuf, rxsize);
+	if (ret)
+		return ret;
+
+	switch (txbuf[1]) {
+	case SCD30_SERDEV_WRITE:
+		if (memcmp(txbuf, rxbuf, txsize)) {
+			dev_err(state->dev, "wrong message received\n");
+			return -EIO;
+		}
+		break;
+	case SCD30_SERDEV_READ:
+		if (rxbuf[2] != (rxsize - SCD30_SERDEV_RX_HEADER_SIZE - SCD30_SERDEV_CRC_SIZE)) {
+			dev_err(state->dev, "received data size does not match header\n");
+			return -EIO;
+		}
+
+		rxsize -= SCD30_SERDEV_CRC_SIZE;
+		crc = get_unaligned_le16(rxbuf + rxsize);
+		if (crc != scd30_serdev_calc_crc(rxbuf, rxsize)) {
+			dev_err(state->dev, "data integrity check failed\n");
+			return -EIO;
+		}
+
+		rxsize -= SCD30_SERDEV_RX_HEADER_SIZE;
+		memcpy(rsp, rxbuf + SCD30_SERDEV_RX_HEADER_SIZE, rxsize);
+		break;
+	default:
+		dev_err(state->dev, "received unknown op code\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int scd30_serdev_receive_buf(struct serdev_device *serdev,
+				    const unsigned char *buf, size_t size)
+{
+	struct iio_dev *indio_dev = serdev_device_get_drvdata(serdev);
+	struct scd30_serdev_priv *priv;
+	struct scd30_state *state;
+	int num;
+
+	if (!indio_dev)
+		return 0;
+
+	state = iio_priv(indio_dev);
+	priv = state->priv;
+
+	/* just in case sensor puts some unexpected bytes on the bus */
+	if (!priv->buf)
+		return 0;
+
+	if (priv->num + size >= priv->num_expected)
+		num = priv->num_expected - priv->num;
+	else
+		num = size;
+
+	memcpy(priv->buf + priv->num, buf, num);
+	priv->num += num;
+
+	if (priv->num == priv->num_expected) {
+		priv->buf = NULL;
+		complete(&priv->meas_ready);
+	}
+
+	return num;
+}
+
+static const struct serdev_device_ops scd30_serdev_ops = {
+	.receive_buf = scd30_serdev_receive_buf,
+	.write_wakeup = serdev_device_write_wakeup,
+};
+
+static int scd30_serdev_probe(struct serdev_device *serdev)
+{
+	struct device *dev = &serdev->dev;
+	struct scd30_serdev_priv *priv;
+	int irq, ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	init_completion(&priv->meas_ready);
+	serdev_device_set_client_ops(serdev, &scd30_serdev_ops);
+
+	ret = devm_serdev_device_open(dev, serdev);
+	if (ret)
+		return ret;
+
+	serdev_device_set_baudrate(serdev, 19200);
+	serdev_device_set_flow_control(serdev, false);
+
+	ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
+	if (ret)
+		return ret;
+
+	irq = fwnode_irq_get(dev_fwnode(dev), 0);
+
+	return scd30_probe(dev, irq, KBUILD_MODNAME, priv, scd30_serdev_command);
+}
+
+static const struct of_device_id scd30_serdev_of_match[] = {
+	{ .compatible = "sensirion,scd30" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, scd30_serdev_of_match);
+
+static struct serdev_device_driver scd30_serdev_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = scd30_serdev_of_match,
+		.pm = pm_sleep_ptr(&scd30_pm_ops),
+	},
+	.probe = scd30_serdev_probe,
+};
+module_serdev_device_driver(scd30_serdev_driver);
+
+MODULE_AUTHOR("Tomasz Duszynski <tomasz.duszynski@octakon.com>");
+MODULE_DESCRIPTION("Sensirion SCD30 carbon dioxide sensor serial driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_SCD30);
diff --git a/drivers/iio/chemical/scd4x.c b/drivers/iio/chemical/scd4x.c
new file mode 100644
index 000000000..54066532e
--- /dev/null
+++ b/drivers/iio/chemical/scd4x.c
@@ -0,0 +1,699 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sensirion SCD4X carbon dioxide sensor i2c driver
+ *
+ * Copyright (C) 2021 Protonic Holland
+ * Author: Roan van Dijk <roan@protonic.nl>
+ *
+ * I2C slave address: 0x62
+ *
+ * Datasheets:
+ * https://www.sensirion.com/file/datasheet_scd4x
+ */
+
+#include <asm/unaligned.h>
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/types.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/string.h>
+#include <linux/sysfs.h>
+#include <linux/types.h>
+
+#define SCD4X_CRC8_POLYNOMIAL 0x31
+#define SCD4X_TIMEOUT_ERR 1000
+#define SCD4X_READ_BUF_SIZE 9
+#define SCD4X_COMMAND_BUF_SIZE 2
+#define SCD4X_WRITE_BUF_SIZE 5
+#define SCD4X_FRC_MIN_PPM 0
+#define SCD4X_FRC_MAX_PPM 2000
+#define SCD4X_READY_MASK 0x01
+
+/*Commands SCD4X*/
+enum scd4x_cmd {
+	CMD_START_MEAS          = 0x21b1,
+	CMD_READ_MEAS           = 0xec05,
+	CMD_STOP_MEAS           = 0x3f86,
+	CMD_SET_TEMP_OFFSET     = 0x241d,
+	CMD_GET_TEMP_OFFSET     = 0x2318,
+	CMD_FRC                 = 0x362f,
+	CMD_SET_ASC             = 0x2416,
+	CMD_GET_ASC             = 0x2313,
+	CMD_GET_DATA_READY      = 0xe4b8,
+};
+
+enum scd4x_channel_idx {
+	SCD4X_CO2,
+	SCD4X_TEMP,
+	SCD4X_HR,
+};
+
+struct scd4x_state {
+	struct i2c_client *client;
+	/* maintain access to device, to prevent concurrent reads/writes */
+	struct mutex lock;
+	struct regulator *vdd;
+};
+
+DECLARE_CRC8_TABLE(scd4x_crc8_table);
+
+static int scd4x_i2c_xfer(struct scd4x_state *state, char *txbuf, int txsize,
+				char *rxbuf, int rxsize)
+{
+	struct i2c_client *client = state->client;
+	int ret;
+
+	ret = i2c_master_send(client, txbuf, txsize);
+
+	if (ret < 0)
+		return ret;
+	if (ret != txsize)
+		return -EIO;
+
+	if (rxsize == 0)
+		return 0;
+
+	ret = i2c_master_recv(client, rxbuf, rxsize);
+	if (ret < 0)
+		return ret;
+	if (ret != rxsize)
+		return -EIO;
+
+	return 0;
+}
+
+static int scd4x_send_command(struct scd4x_state *state, enum scd4x_cmd cmd)
+{
+	char buf[SCD4X_COMMAND_BUF_SIZE];
+	int ret;
+
+	/*
+	 * Measurement needs to be stopped before sending commands.
+	 * Except stop and start command.
+	 */
+	if ((cmd != CMD_STOP_MEAS) && (cmd != CMD_START_MEAS)) {
+
+		ret = scd4x_send_command(state, CMD_STOP_MEAS);
+		if (ret)
+			return ret;
+
+		/* execution time for stopping measurement */
+		msleep_interruptible(500);
+	}
+
+	put_unaligned_be16(cmd, buf);
+	ret = scd4x_i2c_xfer(state, buf, 2, buf, 0);
+	if (ret)
+		return ret;
+
+	if ((cmd != CMD_STOP_MEAS) && (cmd != CMD_START_MEAS)) {
+		ret = scd4x_send_command(state, CMD_START_MEAS);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int scd4x_read(struct scd4x_state *state, enum scd4x_cmd cmd,
+			void *response, int response_sz)
+{
+	struct i2c_client *client = state->client;
+	char buf[SCD4X_READ_BUF_SIZE];
+	char *rsp = response;
+	int i, ret;
+	char crc;
+
+	/*
+	 * Measurement needs to be stopped before sending commands.
+	 * Except for reading measurement and data ready command.
+	 */
+	if ((cmd != CMD_GET_DATA_READY) && (cmd != CMD_READ_MEAS)) {
+		ret = scd4x_send_command(state, CMD_STOP_MEAS);
+		if (ret)
+			return ret;
+
+		/* execution time for stopping measurement */
+		msleep_interruptible(500);
+	}
+
+	/* CRC byte for every 2 bytes of data */
+	response_sz += response_sz / 2;
+
+	put_unaligned_be16(cmd, buf);
+	ret = scd4x_i2c_xfer(state, buf, 2, buf, response_sz);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < response_sz; i += 3) {
+		crc = crc8(scd4x_crc8_table, buf + i, 2, CRC8_INIT_VALUE);
+		if (crc != buf[i + 2]) {
+			dev_err(&client->dev, "CRC error\n");
+			return -EIO;
+		}
+
+		*rsp++ = buf[i];
+		*rsp++ = buf[i + 1];
+	}
+
+	/* start measurement */
+	if ((cmd != CMD_GET_DATA_READY) && (cmd != CMD_READ_MEAS)) {
+		ret = scd4x_send_command(state, CMD_START_MEAS);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int scd4x_write(struct scd4x_state *state, enum scd4x_cmd cmd, uint16_t arg)
+{
+	char buf[SCD4X_WRITE_BUF_SIZE];
+	int ret;
+	char crc;
+
+	put_unaligned_be16(cmd, buf);
+	put_unaligned_be16(arg, buf + 2);
+
+	crc = crc8(scd4x_crc8_table, buf + 2, 2, CRC8_INIT_VALUE);
+	buf[4] = crc;
+
+	/* measurement needs to be stopped before sending commands */
+	ret = scd4x_send_command(state, CMD_STOP_MEAS);
+	if (ret)
+		return ret;
+
+	/* execution time */
+	msleep_interruptible(500);
+
+	ret = scd4x_i2c_xfer(state, buf, SCD4X_WRITE_BUF_SIZE, buf, 0);
+	if (ret)
+		return ret;
+
+	/* start measurement, except for forced calibration command */
+	if (cmd != CMD_FRC) {
+		ret = scd4x_send_command(state, CMD_START_MEAS);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static int scd4x_write_and_fetch(struct scd4x_state *state, enum scd4x_cmd cmd,
+				uint16_t arg, void *response, int response_sz)
+{
+	struct i2c_client *client = state->client;
+	char buf[SCD4X_READ_BUF_SIZE];
+	char *rsp = response;
+	int i, ret;
+	char crc;
+
+	ret = scd4x_write(state, CMD_FRC, arg);
+	if (ret)
+		goto err;
+
+	/* execution time */
+	msleep_interruptible(400);
+
+	/* CRC byte for every 2 bytes of data */
+	response_sz += response_sz / 2;
+
+	ret = i2c_master_recv(client, buf, response_sz);
+	if (ret < 0)
+		goto err;
+	if (ret != response_sz) {
+		ret = -EIO;
+		goto err;
+	}
+
+	for (i = 0; i < response_sz; i += 3) {
+		crc = crc8(scd4x_crc8_table, buf + i, 2, CRC8_INIT_VALUE);
+		if (crc != buf[i + 2]) {
+			dev_err(&client->dev, "CRC error\n");
+			ret = -EIO;
+			goto err;
+		}
+
+		*rsp++ = buf[i];
+		*rsp++ = buf[i + 1];
+	}
+
+	return scd4x_send_command(state, CMD_START_MEAS);
+
+err:
+	/*
+	 * on error try to start the measurement,
+	 * puts sensor back into continuous measurement
+	 */
+	scd4x_send_command(state, CMD_START_MEAS);
+
+	return ret;
+}
+
+static int scd4x_read_meas(struct scd4x_state *state, uint16_t *meas)
+{
+	int i, ret;
+	__be16 buf[3];
+
+	ret = scd4x_read(state, CMD_READ_MEAS, buf, sizeof(buf));
+	if (ret)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(buf); i++)
+		meas[i] = be16_to_cpu(buf[i]);
+
+	return 0;
+}
+
+static int scd4x_wait_meas_poll(struct scd4x_state *state)
+{
+	struct i2c_client *client = state->client;
+	int tries = 6;
+	int ret;
+
+	do {
+		__be16 bval;
+		uint16_t val;
+
+		ret = scd4x_read(state, CMD_GET_DATA_READY, &bval, sizeof(bval));
+		if (ret)
+			return -EIO;
+		val = be16_to_cpu(bval);
+
+		/* new measurement available */
+		if (val & 0x7FF)
+			return 0;
+
+		msleep_interruptible(1000);
+	} while (--tries);
+
+	/* try to start sensor on timeout */
+	ret = scd4x_send_command(state, CMD_START_MEAS);
+	if (ret)
+		dev_err(&client->dev, "failed to start measurement: %d\n", ret);
+
+	return -ETIMEDOUT;
+}
+
+static int scd4x_read_poll(struct scd4x_state *state, uint16_t *buf)
+{
+	int ret;
+
+	ret = scd4x_wait_meas_poll(state);
+	if (ret)
+		return ret;
+
+	return scd4x_read_meas(state, buf);
+}
+
+static int scd4x_read_channel(struct scd4x_state *state, int chan)
+{
+	int ret;
+	uint16_t buf[3];
+
+	ret = scd4x_read_poll(state, buf);
+	if (ret)
+		return ret;
+
+	return buf[chan];
+}
+
+static int scd4x_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan, int *val,
+			int *val2, long mask)
+{
+	struct scd4x_state *state = iio_priv(indio_dev);
+	int ret;
+	__be16 tmp;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		mutex_lock(&state->lock);
+		ret = scd4x_read_channel(state, chan->address);
+		mutex_unlock(&state->lock);
+
+		iio_device_release_direct_mode(indio_dev);
+		if (ret < 0)
+			return ret;
+
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type == IIO_CONCENTRATION) {
+			*val = 0;
+			*val2 = 100;
+			return IIO_VAL_INT_PLUS_MICRO;
+		} else if (chan->type == IIO_TEMP) {
+			*val = 175000;
+			*val2 = 65536;
+			return IIO_VAL_FRACTIONAL;
+		} else if (chan->type == IIO_HUMIDITYRELATIVE) {
+			*val = 100000;
+			*val2 = 65536;
+			return IIO_VAL_FRACTIONAL;
+		}
+		return -EINVAL;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = -16852;
+		*val2 = 114286;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		mutex_lock(&state->lock);
+		ret = scd4x_read(state, CMD_GET_TEMP_OFFSET, &tmp, sizeof(tmp));
+		mutex_unlock(&state->lock);
+		if (ret)
+			return ret;
+
+		*val = be16_to_cpu(tmp);
+
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int scd4x_write_raw(struct iio_dev *indio_dev, struct iio_chan_spec const *chan,
+				int val, int val2, long mask)
+{
+	struct scd4x_state *state = iio_priv(indio_dev);
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		mutex_lock(&state->lock);
+		ret = scd4x_write(state, CMD_SET_TEMP_OFFSET, val);
+		mutex_unlock(&state->lock);
+
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static ssize_t calibration_auto_enable_show(struct device *dev,
+			struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct scd4x_state *state = iio_priv(indio_dev);
+	int ret;
+	__be16 bval;
+	u16 val;
+
+	mutex_lock(&state->lock);
+	ret = scd4x_read(state, CMD_GET_ASC, &bval, sizeof(bval));
+	mutex_unlock(&state->lock);
+	if (ret) {
+		dev_err(dev, "failed to read automatic calibration");
+		return ret;
+	}
+
+	val = (be16_to_cpu(bval) & SCD4X_READY_MASK) ? 1 : 0;
+
+	return sysfs_emit(buf, "%d\n", val);
+}
+
+static ssize_t calibration_auto_enable_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct scd4x_state *state = iio_priv(indio_dev);
+	bool val;
+	int ret;
+	uint16_t value;
+
+	ret = kstrtobool(buf, &val);
+	if (ret)
+		return ret;
+
+	value = val;
+
+	mutex_lock(&state->lock);
+	ret = scd4x_write(state, CMD_SET_ASC, value);
+	mutex_unlock(&state->lock);
+	if (ret)
+		dev_err(dev, "failed to set automatic calibration");
+
+	return ret ?: len;
+}
+
+static ssize_t calibration_forced_value_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct scd4x_state *state = iio_priv(indio_dev);
+	uint16_t val, arg;
+	int ret;
+
+	ret = kstrtou16(buf, 0, &arg);
+	if (ret)
+		return ret;
+
+	if (arg < SCD4X_FRC_MIN_PPM || arg > SCD4X_FRC_MAX_PPM)
+		return -EINVAL;
+
+	mutex_lock(&state->lock);
+	ret = scd4x_write_and_fetch(state, CMD_FRC, arg, &val, sizeof(val));
+	mutex_unlock(&state->lock);
+
+	if (ret)
+		return ret;
+
+	if (val == 0xff) {
+		dev_err(dev, "forced calibration has failed");
+		return -EINVAL;
+	}
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR_RW(calibration_auto_enable, 0);
+static IIO_DEVICE_ATTR_WO(calibration_forced_value, 0);
+
+static IIO_CONST_ATTR(calibration_forced_value_available,
+	       __stringify([SCD4X_FRC_MIN_PPM 1 SCD4X_FRC_MAX_PPM]));
+
+static struct attribute *scd4x_attrs[] = {
+	&iio_dev_attr_calibration_auto_enable.dev_attr.attr,
+	&iio_dev_attr_calibration_forced_value.dev_attr.attr,
+	&iio_const_attr_calibration_forced_value_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group scd4x_attr_group = {
+	.attrs = scd4x_attrs,
+};
+
+static const struct iio_info scd4x_info = {
+	.attrs = &scd4x_attr_group,
+	.read_raw = scd4x_read_raw,
+	.write_raw = scd4x_write_raw,
+};
+
+static const struct iio_chan_spec scd4x_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_CO2,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+					BIT(IIO_CHAN_INFO_SCALE),
+		.address = SCD4X_CO2,
+		.scan_index = SCD4X_CO2,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+					BIT(IIO_CHAN_INFO_SCALE) |
+					BIT(IIO_CHAN_INFO_OFFSET) |
+					BIT(IIO_CHAN_INFO_CALIBBIAS),
+		.address = SCD4X_TEMP,
+		.scan_index = SCD4X_TEMP,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	{
+		.type = IIO_HUMIDITYRELATIVE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+					BIT(IIO_CHAN_INFO_SCALE),
+		.address = SCD4X_HR,
+		.scan_index = SCD4X_HR,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+};
+
+static int scd4x_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct scd4x_state *state  = iio_priv(indio_dev);
+	int ret;
+
+	ret = scd4x_send_command(state, CMD_STOP_MEAS);
+	if (ret)
+		return ret;
+
+	return regulator_disable(state->vdd);
+}
+
+static int scd4x_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct scd4x_state *state = iio_priv(indio_dev);
+	int ret;
+
+	ret = regulator_enable(state->vdd);
+	if (ret)
+		return ret;
+
+	return scd4x_send_command(state, CMD_START_MEAS);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(scd4x_pm_ops, scd4x_suspend, scd4x_resume);
+
+static void scd4x_stop_meas(void *state)
+{
+	scd4x_send_command(state, CMD_STOP_MEAS);
+}
+
+static void scd4x_disable_regulator(void *data)
+{
+	struct scd4x_state *state = data;
+
+	regulator_disable(state->vdd);
+}
+
+static irqreturn_t scd4x_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct scd4x_state *state = iio_priv(indio_dev);
+	struct {
+		uint16_t data[3];
+		int64_t ts __aligned(8);
+	} scan;
+	int ret;
+
+	memset(&scan, 0, sizeof(scan));
+	mutex_lock(&state->lock);
+	ret = scd4x_read_poll(state, scan.data);
+	mutex_unlock(&state->lock);
+	if (ret)
+		goto out;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan, iio_get_time_ns(indio_dev));
+out:
+	iio_trigger_notify_done(indio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+static int scd4x_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	static const unsigned long scd4x_scan_masks[] = { 0x07, 0x00 };
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct scd4x_state *state;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	state = iio_priv(indio_dev);
+	mutex_init(&state->lock);
+	state->client = client;
+	crc8_populate_msb(scd4x_crc8_table, SCD4X_CRC8_POLYNOMIAL);
+
+	indio_dev->info = &scd4x_info;
+	indio_dev->name = client->name;
+	indio_dev->channels = scd4x_channels;
+	indio_dev->num_channels = ARRAY_SIZE(scd4x_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->available_scan_masks = scd4x_scan_masks;
+
+	state->vdd = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(state->vdd))
+		return dev_err_probe(dev, PTR_ERR(state->vdd), "failed to get regulator\n");
+
+	ret = regulator_enable(state->vdd);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, scd4x_disable_regulator, state);
+	if (ret)
+		return ret;
+
+	ret = scd4x_send_command(state, CMD_STOP_MEAS);
+	if (ret) {
+		dev_err(dev, "failed to stop measurement: %d\n", ret);
+		return ret;
+	}
+
+	/* execution time */
+	msleep_interruptible(500);
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, scd4x_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	ret = scd4x_send_command(state, CMD_START_MEAS);
+	if (ret) {
+		dev_err(dev, "failed to start measurement: %d\n", ret);
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, scd4x_stop_meas, state);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id scd4x_dt_ids[] = {
+	{ .compatible = "sensirion,scd40" },
+	{ .compatible = "sensirion,scd41" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, scd4x_dt_ids);
+
+static struct i2c_driver scd4x_i2c_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = scd4x_dt_ids,
+		.pm = pm_sleep_ptr(&scd4x_pm_ops),
+	},
+	.probe = scd4x_probe,
+};
+module_i2c_driver(scd4x_i2c_driver);
+
+MODULE_AUTHOR("Roan van Dijk <roan@protonic.nl>");
+MODULE_DESCRIPTION("Sensirion SCD4X carbon dioxide sensor core driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/sgp30.c b/drivers/iio/chemical/sgp30.c
new file mode 100644
index 000000000..e2c13c78c
--- /dev/null
+++ b/drivers/iio/chemical/sgp30.c
@@ -0,0 +1,587 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * sgp30.c - Support for Sensirion SGP Gas Sensors
+ *
+ * Copyright (C) 2018 Andreas Brauchli <andreas.brauchli@sensirion.com>
+ *
+ * I2C slave address: 0x58
+ *
+ * Datasheets:
+ * https://www.sensirion.com/file/datasheet_sgp30
+ * https://www.sensirion.com/file/datasheet_sgpc3
+ *
+ * TODO:
+ * - baseline support
+ * - humidity compensation
+ * - power mode switching (SGPC3)
+ */
+
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define SGP_WORD_LEN				2
+#define SGP_CRC8_POLYNOMIAL			0x31
+#define SGP_CRC8_INIT				0xff
+#define SGP_CRC8_LEN				1
+#define SGP_CMD(cmd_word)			cpu_to_be16(cmd_word)
+#define SGP_CMD_DURATION_US			12000
+#define SGP_MEASUREMENT_DURATION_US		50000
+#define SGP_CMD_LEN				SGP_WORD_LEN
+#define SGP_CMD_MAX_BUF_SIZE			(SGP_CMD_LEN + 2 * SGP_WORD_LEN)
+#define SGP_MEASUREMENT_LEN			2
+#define SGP30_MEASURE_INTERVAL_HZ		1
+#define SGPC3_MEASURE_INTERVAL_HZ		2
+#define SGP_VERS_PRODUCT(data)	((((data)->feature_set) & 0xf000) >> 12)
+#define SGP_VERS_RESERVED(data)	((((data)->feature_set) & 0x0800) >> 11)
+#define SGP_VERS_GEN(data)	((((data)->feature_set) & 0x0600) >> 9)
+#define SGP_VERS_ENG_BIT(data)	((((data)->feature_set) & 0x0100) >> 8)
+#define SGP_VERS_MAJOR(data)	((((data)->feature_set) & 0x00e0) >> 5)
+#define SGP_VERS_MINOR(data)	(((data)->feature_set) & 0x001f)
+
+DECLARE_CRC8_TABLE(sgp_crc8_table);
+
+enum sgp_product_id {
+	SGP30 = 0,
+	SGPC3,
+};
+
+enum sgp30_channel_idx {
+	SGP30_IAQ_TVOC_IDX = 0,
+	SGP30_IAQ_CO2EQ_IDX,
+	SGP30_SIG_ETOH_IDX,
+	SGP30_SIG_H2_IDX,
+};
+
+enum sgpc3_channel_idx {
+	SGPC3_IAQ_TVOC_IDX = 10,
+	SGPC3_SIG_ETOH_IDX,
+};
+
+enum sgp_cmd {
+	SGP_CMD_IAQ_INIT			= SGP_CMD(0x2003),
+	SGP_CMD_IAQ_MEASURE			= SGP_CMD(0x2008),
+	SGP_CMD_GET_FEATURE_SET			= SGP_CMD(0x202f),
+	SGP_CMD_GET_SERIAL_ID			= SGP_CMD(0x3682),
+
+	SGP30_CMD_MEASURE_SIGNAL		= SGP_CMD(0x2050),
+
+	SGPC3_CMD_MEASURE_RAW			= SGP_CMD(0x2046),
+};
+
+struct sgp_version {
+	u8 major;
+	u8 minor;
+};
+
+struct sgp_crc_word {
+	__be16 value;
+	u8 crc8;
+} __attribute__((__packed__));
+
+union sgp_reading {
+	u8 start;
+	struct sgp_crc_word raw_words[4];
+};
+
+enum _iaq_buffer_state {
+	IAQ_BUFFER_EMPTY = 0,
+	IAQ_BUFFER_DEFAULT_VALS,
+	IAQ_BUFFER_VALID,
+};
+
+struct sgp_data {
+	struct i2c_client *client;
+	struct task_struct *iaq_thread;
+	struct mutex data_lock;
+	unsigned long iaq_init_start_jiffies;
+	unsigned long iaq_defval_skip_jiffies;
+	u16 product_id;
+	u16 feature_set;
+	unsigned long measure_interval_jiffies;
+	enum sgp_cmd iaq_init_cmd;
+	enum sgp_cmd measure_iaq_cmd;
+	enum sgp_cmd measure_gas_signals_cmd;
+	union sgp_reading buffer;
+	union sgp_reading iaq_buffer;
+	enum _iaq_buffer_state iaq_buffer_state;
+};
+
+struct sgp_device {
+	const struct iio_chan_spec *channels;
+	int num_channels;
+};
+
+static const struct sgp_version supported_versions_sgp30[] = {
+	{
+		.major = 1,
+		.minor = 0,
+	},
+};
+
+static const struct sgp_version supported_versions_sgpc3[] = {
+	{
+		.major = 0,
+		.minor = 4,
+	},
+};
+
+static const struct iio_chan_spec sgp30_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_VOC,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = SGP30_IAQ_TVOC_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_CO2,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = SGP30_IAQ_CO2EQ_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_ETHANOL,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.address = SGP30_SIG_ETOH_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_H2,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.address = SGP30_SIG_H2_IDX,
+	},
+};
+
+static const struct iio_chan_spec sgpc3_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_VOC,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+		.address = SGPC3_IAQ_TVOC_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_ETHANOL,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.address = SGPC3_SIG_ETOH_IDX,
+	},
+};
+
+static const struct sgp_device sgp_devices[] = {
+	[SGP30] = {
+		.channels = sgp30_channels,
+		.num_channels = ARRAY_SIZE(sgp30_channels),
+	},
+	[SGPC3] = {
+		.channels = sgpc3_channels,
+		.num_channels = ARRAY_SIZE(sgpc3_channels),
+	},
+};
+
+/**
+ * sgp_verify_buffer() - verify the checksums of the data buffer words
+ *
+ * @data:       SGP data
+ * @buf:        Raw data buffer
+ * @word_count: Num data words stored in the buffer, excluding CRC bytes
+ *
+ * Return:      0 on success, negative error otherwise.
+ */
+static int sgp_verify_buffer(const struct sgp_data *data,
+			     union sgp_reading *buf, size_t word_count)
+{
+	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
+	int i;
+	u8 crc;
+	u8 *data_buf = &buf->start;
+
+	for (i = 0; i < size; i += SGP_WORD_LEN + SGP_CRC8_LEN) {
+		crc = crc8(sgp_crc8_table, &data_buf[i], SGP_WORD_LEN,
+			   SGP_CRC8_INIT);
+		if (crc != data_buf[i + SGP_WORD_LEN]) {
+			dev_err(&data->client->dev, "CRC error\n");
+			return -EIO;
+		}
+	}
+
+	return 0;
+}
+
+/**
+ * sgp_read_cmd() - reads data from sensor after issuing a command
+ * The caller must hold data->data_lock for the duration of the call.
+ * @data:        SGP data
+ * @cmd:         SGP Command to issue
+ * @buf:         Raw data buffer to use
+ * @word_count:  Num words to read, excluding CRC bytes
+ * @duration_us: Time taken to sensor to take a reading and data to be ready.
+ *
+ * Return:       0 on success, negative error otherwise.
+ */
+static int sgp_read_cmd(struct sgp_data *data, enum sgp_cmd cmd,
+			union sgp_reading *buf, size_t word_count,
+			unsigned long duration_us)
+{
+	int ret;
+	struct i2c_client *client = data->client;
+	size_t size = word_count * (SGP_WORD_LEN + SGP_CRC8_LEN);
+	u8 *data_buf;
+
+	ret = i2c_master_send(client, (const char *)&cmd, SGP_CMD_LEN);
+	if (ret != SGP_CMD_LEN)
+		return -EIO;
+	usleep_range(duration_us, duration_us + 1000);
+
+	if (word_count == 0)
+		return 0;
+
+	data_buf = &buf->start;
+	ret = i2c_master_recv(client, data_buf, size);
+	if (ret < 0)
+		return ret;
+	if (ret != size)
+		return -EIO;
+
+	return sgp_verify_buffer(data, buf, word_count);
+}
+
+/**
+ * sgp_measure_iaq() - measure and retrieve IAQ values from sensor
+ * The caller must hold data->data_lock for the duration of the call.
+ * @data:       SGP data
+ *
+ * Return:      0 on success, -EBUSY on default values, negative error
+ *              otherwise.
+ */
+
+static int sgp_measure_iaq(struct sgp_data *data)
+{
+	int ret;
+	/* data contains default values */
+	bool default_vals = !time_after(jiffies, data->iaq_init_start_jiffies +
+						 data->iaq_defval_skip_jiffies);
+
+	ret = sgp_read_cmd(data, data->measure_iaq_cmd, &data->iaq_buffer,
+			   SGP_MEASUREMENT_LEN, SGP_MEASUREMENT_DURATION_US);
+	if (ret < 0)
+		return ret;
+
+	data->iaq_buffer_state = IAQ_BUFFER_DEFAULT_VALS;
+
+	if (default_vals)
+		return -EBUSY;
+
+	data->iaq_buffer_state = IAQ_BUFFER_VALID;
+
+	return 0;
+}
+
+static void sgp_iaq_thread_sleep_until(const struct sgp_data *data,
+				       unsigned long sleep_jiffies)
+{
+	const long IAQ_POLL = 50000;
+
+	while (!time_after(jiffies, sleep_jiffies)) {
+		usleep_range(IAQ_POLL, IAQ_POLL + 10000);
+		if (kthread_should_stop() || data->iaq_init_start_jiffies == 0)
+			return;
+	}
+}
+
+static int sgp_iaq_threadfn(void *p)
+{
+	struct sgp_data *data = (struct sgp_data *)p;
+	unsigned long next_update_jiffies;
+	int ret;
+
+	while (!kthread_should_stop()) {
+		mutex_lock(&data->data_lock);
+		if (data->iaq_init_start_jiffies == 0) {
+			ret = sgp_read_cmd(data, data->iaq_init_cmd, NULL, 0,
+					   SGP_CMD_DURATION_US);
+			if (ret < 0)
+				goto unlock_sleep_continue;
+			data->iaq_init_start_jiffies = jiffies;
+		}
+
+		ret = sgp_measure_iaq(data);
+		if (ret && ret != -EBUSY) {
+			dev_warn(&data->client->dev,
+				 "IAQ measurement error [%d]\n", ret);
+		}
+unlock_sleep_continue:
+		next_update_jiffies = jiffies + data->measure_interval_jiffies;
+		mutex_unlock(&data->data_lock);
+		sgp_iaq_thread_sleep_until(data, next_update_jiffies);
+	}
+
+	return 0;
+}
+
+static int sgp_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan, int *val,
+			int *val2, long mask)
+{
+	struct sgp_data *data = iio_priv(indio_dev);
+	struct sgp_crc_word *words;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		mutex_lock(&data->data_lock);
+		if (data->iaq_buffer_state != IAQ_BUFFER_VALID) {
+			mutex_unlock(&data->data_lock);
+			return -EBUSY;
+		}
+		words = data->iaq_buffer.raw_words;
+		switch (chan->address) {
+		case SGP30_IAQ_TVOC_IDX:
+		case SGPC3_IAQ_TVOC_IDX:
+			*val = 0;
+			*val2 = be16_to_cpu(words[1].value);
+			ret = IIO_VAL_INT_PLUS_NANO;
+			break;
+		case SGP30_IAQ_CO2EQ_IDX:
+			*val = 0;
+			*val2 = be16_to_cpu(words[0].value);
+			ret = IIO_VAL_INT_PLUS_MICRO;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		mutex_unlock(&data->data_lock);
+		break;
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&data->data_lock);
+		if (chan->address == SGPC3_SIG_ETOH_IDX) {
+			if (data->iaq_buffer_state == IAQ_BUFFER_EMPTY)
+				ret = -EBUSY;
+			else
+				ret = 0;
+			words = data->iaq_buffer.raw_words;
+		} else {
+			ret = sgp_read_cmd(data, data->measure_gas_signals_cmd,
+					   &data->buffer, SGP_MEASUREMENT_LEN,
+					   SGP_MEASUREMENT_DURATION_US);
+			words = data->buffer.raw_words;
+		}
+		if (ret) {
+			mutex_unlock(&data->data_lock);
+			return ret;
+		}
+
+		switch (chan->address) {
+		case SGP30_SIG_ETOH_IDX:
+			*val = be16_to_cpu(words[1].value);
+			ret = IIO_VAL_INT;
+			break;
+		case SGPC3_SIG_ETOH_IDX:
+		case SGP30_SIG_H2_IDX:
+			*val = be16_to_cpu(words[0].value);
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		mutex_unlock(&data->data_lock);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+static int sgp_check_compat(struct sgp_data *data,
+			    unsigned int product_id)
+{
+	struct device *dev = &data->client->dev;
+	const struct sgp_version *supported_versions;
+	u16 ix, num_fs;
+	u16 product, generation, major, minor;
+
+	/* driver does not match product */
+	generation = SGP_VERS_GEN(data);
+	if (generation != 0) {
+		dev_err(dev,
+			"incompatible product generation %d != 0", generation);
+		return -ENODEV;
+	}
+
+	product = SGP_VERS_PRODUCT(data);
+	if (product != product_id) {
+		dev_err(dev, "sensor reports a different product: 0x%04x\n",
+			product);
+		return -ENODEV;
+	}
+
+	if (SGP_VERS_RESERVED(data))
+		dev_warn(dev, "reserved bit is set\n");
+
+	/* engineering samples are not supported: no interface guarantees */
+	if (SGP_VERS_ENG_BIT(data))
+		return -ENODEV;
+
+	switch (product) {
+	case SGP30:
+		supported_versions = supported_versions_sgp30;
+		num_fs = ARRAY_SIZE(supported_versions_sgp30);
+		break;
+	case SGPC3:
+		supported_versions = supported_versions_sgpc3;
+		num_fs = ARRAY_SIZE(supported_versions_sgpc3);
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	major = SGP_VERS_MAJOR(data);
+	minor = SGP_VERS_MINOR(data);
+	for (ix = 0; ix < num_fs; ix++) {
+		if (major == supported_versions[ix].major &&
+		    minor >= supported_versions[ix].minor)
+			return 0;
+	}
+	dev_err(dev, "unsupported sgp version: %d.%d\n", major, minor);
+
+	return -ENODEV;
+}
+
+static void sgp_init(struct sgp_data *data)
+{
+	data->iaq_init_cmd = SGP_CMD_IAQ_INIT;
+	data->iaq_init_start_jiffies = 0;
+	data->iaq_buffer_state = IAQ_BUFFER_EMPTY;
+	switch (SGP_VERS_PRODUCT(data)) {
+	case SGP30:
+		data->measure_interval_jiffies = SGP30_MEASURE_INTERVAL_HZ * HZ;
+		data->measure_iaq_cmd = SGP_CMD_IAQ_MEASURE;
+		data->measure_gas_signals_cmd = SGP30_CMD_MEASURE_SIGNAL;
+		data->product_id = SGP30;
+		data->iaq_defval_skip_jiffies = 15 * HZ;
+		break;
+	case SGPC3:
+		data->measure_interval_jiffies = SGPC3_MEASURE_INTERVAL_HZ * HZ;
+		data->measure_iaq_cmd = SGPC3_CMD_MEASURE_RAW;
+		data->measure_gas_signals_cmd = SGPC3_CMD_MEASURE_RAW;
+		data->product_id = SGPC3;
+		data->iaq_defval_skip_jiffies =
+			43 * data->measure_interval_jiffies;
+		break;
+	}
+}
+
+static const struct iio_info sgp_info = {
+	.read_raw	= sgp_read_raw,
+};
+
+static const struct of_device_id sgp_dt_ids[] = {
+	{ .compatible = "sensirion,sgp30", .data = (void *)SGP30 },
+	{ .compatible = "sensirion,sgpc3", .data = (void *)SGPC3 },
+	{ }
+};
+
+static int sgp_probe(struct i2c_client *client,
+		     const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct sgp_data *data;
+	unsigned long product_id;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	if (dev_fwnode(dev))
+		product_id = (unsigned long)device_get_match_data(dev);
+	else
+		product_id = id->driver_data;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	crc8_populate_msb(sgp_crc8_table, SGP_CRC8_POLYNOMIAL);
+	mutex_init(&data->data_lock);
+
+	/* get feature set version and write it to client data */
+	ret = sgp_read_cmd(data, SGP_CMD_GET_FEATURE_SET, &data->buffer, 1,
+			   SGP_CMD_DURATION_US);
+	if (ret < 0)
+		return ret;
+
+	data->feature_set = be16_to_cpu(data->buffer.raw_words[0].value);
+
+	ret = sgp_check_compat(data, product_id);
+	if (ret)
+		return ret;
+
+	indio_dev->info = &sgp_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = sgp_devices[product_id].channels;
+	indio_dev->num_channels = sgp_devices[product_id].num_channels;
+
+	sgp_init(data);
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret) {
+		dev_err(dev, "failed to register iio device\n");
+		return ret;
+	}
+
+	data->iaq_thread = kthread_run(sgp_iaq_threadfn, data,
+				       "%s-iaq", data->client->name);
+
+	return 0;
+}
+
+static void sgp_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct sgp_data *data = iio_priv(indio_dev);
+
+	if (data->iaq_thread)
+		kthread_stop(data->iaq_thread);
+}
+
+static const struct i2c_device_id sgp_id[] = {
+	{ "sgp30", SGP30 },
+	{ "sgpc3", SGPC3 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, sgp_id);
+MODULE_DEVICE_TABLE(of, sgp_dt_ids);
+
+static struct i2c_driver sgp_driver = {
+	.driver = {
+		.name = "sgp30",
+		.of_match_table = sgp_dt_ids,
+	},
+	.probe = sgp_probe,
+	.remove = sgp_remove,
+	.id_table = sgp_id,
+};
+module_i2c_driver(sgp_driver);
+
+MODULE_AUTHOR("Andreas Brauchli <andreas.brauchli@sensirion.com>");
+MODULE_AUTHOR("Pascal Sachs <pascal.sachs@sensirion.com>");
+MODULE_DESCRIPTION("Sensirion SGP gas sensors");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/sgp40.c b/drivers/iio/chemical/sgp40.c
new file mode 100644
index 000000000..8a56394ce
--- /dev/null
+++ b/drivers/iio/chemical/sgp40.c
@@ -0,0 +1,378 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * sgp40.c - Support for Sensirion SGP40 Gas Sensor
+ *
+ * Copyright (C) 2021 Andreas Klinger <ak@it-klinger.de>
+ *
+ * I2C slave address: 0x59
+ *
+ * Datasheet can be found here:
+ * https://www.sensirion.com/file/datasheet_sgp40
+ *
+ * There are two functionalities supported:
+ *
+ * 1) read raw logarithmic resistance value from sensor
+ *    --> useful to pass it to the algorithm of the sensor vendor for
+ *    measuring deteriorations and improvements of air quality.
+ *
+ * 2) calculate an estimated absolute voc index (0 - 500 index points) for
+ *    measuring the air quality.
+ *    For this purpose the value of the resistance for which the voc index
+ *    will be 250 can be set up using calibbias.
+ *
+ * Compensation values of relative humidity and temperature can be set up
+ * by writing to the out values of temp and humidityrelative.
+ */
+
+#include <linux/delay.h>
+#include <linux/crc8.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+
+/*
+ * floating point calculation of voc is done as integer
+ * where numbers are multiplied by 1 << SGP40_CALC_POWER
+ */
+#define SGP40_CALC_POWER	14
+
+#define SGP40_CRC8_POLYNOMIAL	0x31
+#define SGP40_CRC8_INIT		0xff
+
+DECLARE_CRC8_TABLE(sgp40_crc8_table);
+
+struct sgp40_data {
+	struct device		*dev;
+	struct i2c_client	*client;
+	int			rht;
+	int			temp;
+	int			res_calibbias;
+	/* Prevent concurrent access to rht, tmp, calibbias */
+	struct mutex		lock;
+};
+
+struct sgp40_tg_measure {
+	u8	command[2];
+	__be16	rht_ticks;
+	u8	rht_crc;
+	__be16	temp_ticks;
+	u8	temp_crc;
+} __packed;
+
+struct sgp40_tg_result {
+	__be16	res_ticks;
+	u8	res_crc;
+} __packed;
+
+static const struct iio_chan_spec sgp40_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_VOC,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+	},
+	{
+		.type = IIO_RESISTANCE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_CALIBBIAS),
+	},
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.output = 1,
+	},
+	{
+		.type = IIO_HUMIDITYRELATIVE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.output = 1,
+	},
+};
+
+/*
+ * taylor approximation of e^x:
+ * y = 1 + x + x^2 / 2 + x^3 / 6 + x^4 / 24 + ... + x^n / n!
+ *
+ * Because we are calculating x real value multiplied by 2^power we get
+ * an additional 2^power^n to divide for every element. For a reasonable
+ * precision this would overflow after a few iterations. Therefore we
+ * divide the x^n part whenever its about to overflow (xmax).
+ */
+
+static u32 sgp40_exp(int exp, u32 power, u32 rounds)
+{
+        u32 x, y, xp;
+        u32 factorial, divider, xmax;
+        int sign = 1;
+	int i;
+
+        if (exp == 0)
+                return 1 << power;
+        else if (exp < 0) {
+                sign = -1;
+                exp *= -1;
+        }
+
+        xmax = 0x7FFFFFFF / exp;
+        x = exp;
+        xp = 1;
+        factorial = 1;
+        y = 1 << power;
+        divider = 0;
+
+        for (i = 1; i <= rounds; i++) {
+                xp *= x;
+                factorial *= i;
+                y += (xp >> divider) / factorial;
+                divider += power;
+                /* divide when next multiplication would overflow */
+                if (xp >= xmax) {
+                        xp >>= power;
+                        divider -= power;
+                }
+        }
+
+        if (sign == -1)
+                return (1 << (power * 2)) / y;
+        else
+                return y;
+}
+
+static int sgp40_calc_voc(struct sgp40_data *data, u16 resistance_raw, int *voc)
+{
+	int x;
+	u32 exp = 0;
+
+	/* we calculate as a multiple of 16384 (2^14) */
+	mutex_lock(&data->lock);
+	x = ((int)resistance_raw - data->res_calibbias) * 106;
+	mutex_unlock(&data->lock);
+
+	/* voc = 500 / (1 + e^x) */
+	exp = sgp40_exp(x, SGP40_CALC_POWER, 18);
+	*voc = 500 * ((1 << (SGP40_CALC_POWER * 2)) / ((1<<SGP40_CALC_POWER) + exp));
+
+	dev_dbg(data->dev, "raw: %d res_calibbias: %d x: %d exp: %d voc: %d\n",
+				resistance_raw, data->res_calibbias, x, exp, *voc);
+
+	return 0;
+}
+
+static int sgp40_measure_resistance_raw(struct sgp40_data *data, u16 *resistance_raw)
+{
+	int ret;
+	struct i2c_client *client = data->client;
+	u32 ticks;
+	u16 ticks16;
+	u8 crc;
+	struct sgp40_tg_measure tg = {.command = {0x26, 0x0F}};
+	struct sgp40_tg_result tgres;
+
+	mutex_lock(&data->lock);
+
+	ticks = (data->rht / 10) * 65535 / 10000;
+	ticks16 = (u16)clamp(ticks, 0u, 65535u); /* clamp between 0 .. 100 %rH */
+	tg.rht_ticks = cpu_to_be16(ticks16);
+	tg.rht_crc = crc8(sgp40_crc8_table, (u8 *)&tg.rht_ticks, 2, SGP40_CRC8_INIT);
+
+	ticks = ((data->temp + 45000) / 10 ) * 65535 / 17500;
+	ticks16 = (u16)clamp(ticks, 0u, 65535u); /* clamp between -45 .. +130 °C */
+	tg.temp_ticks = cpu_to_be16(ticks16);
+	tg.temp_crc = crc8(sgp40_crc8_table, (u8 *)&tg.temp_ticks, 2, SGP40_CRC8_INIT);
+
+	mutex_unlock(&data->lock);
+
+	ret = i2c_master_send(client, (const char *)&tg, sizeof(tg));
+	if (ret != sizeof(tg)) {
+		dev_warn(data->dev, "i2c_master_send ret: %d sizeof: %zu\n", ret, sizeof(tg));
+		return -EIO;
+	}
+	msleep(30);
+
+	ret = i2c_master_recv(client, (u8 *)&tgres, sizeof(tgres));
+	if (ret < 0)
+		return ret;
+	if (ret != sizeof(tgres)) {
+		dev_warn(data->dev, "i2c_master_recv ret: %d sizeof: %zu\n", ret, sizeof(tgres));
+		return -EIO;
+	}
+
+	crc = crc8(sgp40_crc8_table, (u8 *)&tgres.res_ticks, 2, SGP40_CRC8_INIT);
+	if (crc != tgres.res_crc) {
+		dev_err(data->dev, "CRC error while measure-raw\n");
+		return -EIO;
+	}
+
+	*resistance_raw = be16_to_cpu(tgres.res_ticks);
+
+	return 0;
+}
+
+static int sgp40_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan, int *val,
+			int *val2, long mask)
+{
+	struct sgp40_data *data = iio_priv(indio_dev);
+	int ret, voc;
+	u16 resistance_raw;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_RESISTANCE:
+			ret = sgp40_measure_resistance_raw(data, &resistance_raw);
+			if (ret)
+				return ret;
+
+			*val = resistance_raw;
+			return IIO_VAL_INT;
+		case IIO_TEMP:
+			mutex_lock(&data->lock);
+			*val = data->temp;
+			mutex_unlock(&data->lock);
+			return IIO_VAL_INT;
+		case IIO_HUMIDITYRELATIVE:
+			mutex_lock(&data->lock);
+			*val = data->rht;
+			mutex_unlock(&data->lock);
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_PROCESSED:
+		ret = sgp40_measure_resistance_raw(data, &resistance_raw);
+		if (ret)
+			return ret;
+
+		ret = sgp40_calc_voc(data, resistance_raw, &voc);
+		if (ret)
+			return ret;
+
+		*val = voc / (1 << SGP40_CALC_POWER);
+		/*
+		 * calculation should fit into integer, where:
+		 * voc <= (500 * 2^SGP40_CALC_POWER) = 8192000
+		 * (with SGP40_CALC_POWER = 14)
+		 */
+		*val2 = ((voc % (1 << SGP40_CALC_POWER)) * 244) / (1 << (SGP40_CALC_POWER - 12));
+		dev_dbg(data->dev, "voc: %d val: %d.%06d\n", voc, *val, *val2);
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		mutex_lock(&data->lock);
+		*val = data->res_calibbias;
+		mutex_unlock(&data->lock);
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sgp40_write_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *chan, int val,
+			int val2, long mask)
+{
+	struct sgp40_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_TEMP:
+			if ((val < -45000) || (val > 130000))
+				return -EINVAL;
+
+			mutex_lock(&data->lock);
+			data->temp = val;
+			mutex_unlock(&data->lock);
+			return 0;
+		case IIO_HUMIDITYRELATIVE:
+			if ((val < 0) || (val > 100000))
+				return -EINVAL;
+
+			mutex_lock(&data->lock);
+			data->rht = val;
+			mutex_unlock(&data->lock);
+			return 0;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if ((val < 20000) || (val > 52768))
+			return -EINVAL;
+
+		mutex_lock(&data->lock);
+		data->res_calibbias = val;
+		mutex_unlock(&data->lock);
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static const struct iio_info sgp40_info = {
+	.read_raw	= sgp40_read_raw,
+	.write_raw	= sgp40_write_raw,
+};
+
+static int sgp40_probe(struct i2c_client *client,
+		     const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct sgp40_data *data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	data->dev = dev;
+
+	crc8_populate_msb(sgp40_crc8_table, SGP40_CRC8_POLYNOMIAL);
+
+	mutex_init(&data->lock);
+
+	/* set default values */
+	data->rht = 50000;		/* 50 % */
+	data->temp = 25000;		/* 25 °C */
+	data->res_calibbias = 30000;	/* resistance raw value for voc index of 250 */
+
+	indio_dev->info = &sgp40_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = sgp40_channels;
+	indio_dev->num_channels = ARRAY_SIZE(sgp40_channels);
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		dev_err(dev, "failed to register iio device\n");
+
+	return ret;
+}
+
+static const struct i2c_device_id sgp40_id[] = {
+	{ "sgp40" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, sgp40_id);
+
+static const struct of_device_id sgp40_dt_ids[] = {
+	{ .compatible = "sensirion,sgp40" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, sgp40_dt_ids);
+
+static struct i2c_driver sgp40_driver = {
+	.driver = {
+		.name = "sgp40",
+		.of_match_table = sgp40_dt_ids,
+	},
+	.probe = sgp40_probe,
+	.id_table = sgp40_id,
+};
+module_i2c_driver(sgp40_driver);
+
+MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
+MODULE_DESCRIPTION("Sensirion SGP40 gas sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/sps30.c b/drivers/iio/chemical/sps30.c
new file mode 100644
index 000000000..814ce0aad
--- /dev/null
+++ b/drivers/iio/chemical/sps30.c
@@ -0,0 +1,379 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sensirion SPS30 particulate matter sensor driver
+ *
+ * Copyright (c) Tomasz Duszynski <tduszyns@gmail.com>
+ */
+
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include "sps30.h"
+
+/* sensor measures reliably up to 3000 ug / m3 */
+#define SPS30_MAX_PM 3000
+/* minimum and maximum self cleaning periods in seconds */
+#define SPS30_AUTO_CLEANING_PERIOD_MIN 0
+#define SPS30_AUTO_CLEANING_PERIOD_MAX 604800
+
+enum {
+	PM1,
+	PM2P5,
+	PM4,
+	PM10,
+};
+
+enum {
+	RESET,
+	MEASURING,
+};
+
+static s32 sps30_float_to_int_clamped(__be32 *fp)
+{
+	int val = be32_to_cpup(fp);
+	int mantissa = val & GENMASK(22, 0);
+	/* this is fine since passed float is always non-negative */
+	int exp = val >> 23;
+	int fraction, shift;
+
+	/* special case 0 */
+	if (!exp && !mantissa)
+		return 0;
+
+	exp -= 127;
+	if (exp < 0) {
+		/* return values ranging from 1 to 99 */
+		return ((((1 << 23) + mantissa) * 100) >> 23) >> (-exp);
+	}
+
+	/* return values ranging from 100 to 300000 */
+	shift = 23 - exp;
+	val = (1 << exp) + (mantissa >> shift);
+	if (val >= SPS30_MAX_PM)
+		return SPS30_MAX_PM * 100;
+
+	fraction = mantissa & GENMASK(shift - 1, 0);
+
+	return val * 100 + ((fraction * 100) >> shift);
+}
+
+static int sps30_do_meas(struct sps30_state *state, s32 *data, int size)
+{
+	int i, ret;
+
+	if (state->state == RESET) {
+		ret = state->ops->start_meas(state);
+		if (ret)
+			return ret;
+
+		state->state = MEASURING;
+	}
+
+	ret = state->ops->read_meas(state, (__be32 *)data, size);
+	if (ret)
+		return ret;
+
+	for (i = 0; i < size; i++)
+		data[i] = sps30_float_to_int_clamped((__be32 *)&data[i]);
+
+	return 0;
+}
+
+static int sps30_do_reset(struct sps30_state *state)
+{
+	int ret;
+
+	ret = state->ops->reset(state);
+	if (ret)
+		return ret;
+
+	state->state = RESET;
+
+	return 0;
+}
+
+static irqreturn_t sps30_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct sps30_state *state = iio_priv(indio_dev);
+	int ret;
+	struct {
+		s32 data[4]; /* PM1, PM2P5, PM4, PM10 */
+		s64 ts;
+	} scan;
+
+	mutex_lock(&state->lock);
+	ret = sps30_do_meas(state, scan.data, ARRAY_SIZE(scan.data));
+	mutex_unlock(&state->lock);
+	if (ret)
+		goto err;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan,
+					   iio_get_time_ns(indio_dev));
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int sps30_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct sps30_state *state = iio_priv(indio_dev);
+	int data[4], ret = -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_PROCESSED:
+		switch (chan->type) {
+		case IIO_MASSCONCENTRATION:
+			mutex_lock(&state->lock);
+			/* read up to the number of bytes actually needed */
+			switch (chan->channel2) {
+			case IIO_MOD_PM1:
+				ret = sps30_do_meas(state, data, 1);
+				break;
+			case IIO_MOD_PM2P5:
+				ret = sps30_do_meas(state, data, 2);
+				break;
+			case IIO_MOD_PM4:
+				ret = sps30_do_meas(state, data, 3);
+				break;
+			case IIO_MOD_PM10:
+				ret = sps30_do_meas(state, data, 4);
+				break;
+			}
+			mutex_unlock(&state->lock);
+			if (ret)
+				return ret;
+
+			*val = data[chan->address] / 100;
+			*val2 = (data[chan->address] % 100) * 10000;
+
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_MASSCONCENTRATION:
+			switch (chan->channel2) {
+			case IIO_MOD_PM1:
+			case IIO_MOD_PM2P5:
+			case IIO_MOD_PM4:
+			case IIO_MOD_PM10:
+				*val = 0;
+				*val2 = 10000;
+
+				return IIO_VAL_INT_PLUS_MICRO;
+			default:
+				return -EINVAL;
+			}
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static ssize_t start_cleaning_store(struct device *dev,
+				    struct device_attribute *attr,
+				    const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct sps30_state *state = iio_priv(indio_dev);
+	int val, ret;
+
+	if (kstrtoint(buf, 0, &val) || val != 1)
+		return -EINVAL;
+
+	mutex_lock(&state->lock);
+	ret = state->ops->clean_fan(state);
+	mutex_unlock(&state->lock);
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+static ssize_t cleaning_period_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct sps30_state *state = iio_priv(indio_dev);
+	__be32 val;
+	int ret;
+
+	mutex_lock(&state->lock);
+	ret = state->ops->read_cleaning_period(state, &val);
+	mutex_unlock(&state->lock);
+	if (ret)
+		return ret;
+
+	return sysfs_emit(buf, "%d\n", be32_to_cpu(val));
+}
+
+static ssize_t cleaning_period_store(struct device *dev, struct device_attribute *attr,
+				     const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct sps30_state *state = iio_priv(indio_dev);
+	int val, ret;
+
+	if (kstrtoint(buf, 0, &val))
+		return -EINVAL;
+
+	if ((val < SPS30_AUTO_CLEANING_PERIOD_MIN) ||
+	    (val > SPS30_AUTO_CLEANING_PERIOD_MAX))
+		return -EINVAL;
+
+	mutex_lock(&state->lock);
+	ret = state->ops->write_cleaning_period(state, cpu_to_be32(val));
+	if (ret) {
+		mutex_unlock(&state->lock);
+		return ret;
+	}
+
+	msleep(20);
+
+	/*
+	 * sensor requires reset in order to return up to date self cleaning
+	 * period
+	 */
+	ret = sps30_do_reset(state);
+	if (ret)
+		dev_warn(dev,
+			 "period changed but reads will return the old value\n");
+
+	mutex_unlock(&state->lock);
+
+	return len;
+}
+
+static ssize_t cleaning_period_available_show(struct device *dev,
+					      struct device_attribute *attr,
+					      char *buf)
+{
+	return sysfs_emit(buf, "[%d %d %d]\n",
+			  SPS30_AUTO_CLEANING_PERIOD_MIN, 1,
+			  SPS30_AUTO_CLEANING_PERIOD_MAX);
+}
+
+static IIO_DEVICE_ATTR_WO(start_cleaning, 0);
+static IIO_DEVICE_ATTR_RW(cleaning_period, 0);
+static IIO_DEVICE_ATTR_RO(cleaning_period_available, 0);
+
+static struct attribute *sps30_attrs[] = {
+	&iio_dev_attr_start_cleaning.dev_attr.attr,
+	&iio_dev_attr_cleaning_period.dev_attr.attr,
+	&iio_dev_attr_cleaning_period_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group sps30_attr_group = {
+	.attrs = sps30_attrs,
+};
+
+static const struct iio_info sps30_info = {
+	.attrs = &sps30_attr_group,
+	.read_raw = sps30_read_raw,
+};
+
+#define SPS30_CHAN(_index, _mod) { \
+	.type = IIO_MASSCONCENTRATION, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## _mod, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.address = _mod, \
+	.scan_index = _index, \
+	.scan_type = { \
+		.sign = 'u', \
+		.realbits = 19, \
+		.storagebits = 32, \
+		.endianness = IIO_CPU, \
+	}, \
+}
+
+static const struct iio_chan_spec sps30_channels[] = {
+	SPS30_CHAN(0, PM1),
+	SPS30_CHAN(1, PM2P5),
+	SPS30_CHAN(2, PM4),
+	SPS30_CHAN(3, PM10),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static void sps30_devm_stop_meas(void *data)
+{
+	struct sps30_state *state = data;
+
+	if (state->state == MEASURING)
+		state->ops->stop_meas(state);
+}
+
+static const unsigned long sps30_scan_masks[] = { 0x0f, 0x00 };
+
+int sps30_probe(struct device *dev, const char *name, void *priv, const struct sps30_ops *ops)
+{
+	struct iio_dev *indio_dev;
+	struct sps30_state *state;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, indio_dev);
+
+	state = iio_priv(indio_dev);
+	state->dev = dev;
+	state->priv = priv;
+	state->ops = ops;
+	mutex_init(&state->lock);
+
+	indio_dev->info = &sps30_info;
+	indio_dev->name = name;
+	indio_dev->channels = sps30_channels;
+	indio_dev->num_channels = ARRAY_SIZE(sps30_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->available_scan_masks = sps30_scan_masks;
+
+	ret = sps30_do_reset(state);
+	if (ret) {
+		dev_err(dev, "failed to reset device\n");
+		return ret;
+	}
+
+	ret = state->ops->show_info(state);
+	if (ret) {
+		dev_err(dev, "failed to read device info\n");
+		return ret;
+	}
+
+	ret = devm_add_action_or_reset(dev, sps30_devm_stop_meas, state);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+					      sps30_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_NS_GPL(sps30_probe, IIO_SPS30);
+
+MODULE_AUTHOR("Tomasz Duszynski <tduszyns@gmail.com>");
+MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/sps30.h b/drivers/iio/chemical/sps30.h
new file mode 100644
index 000000000..a58ee43cf
--- /dev/null
+++ b/drivers/iio/chemical/sps30.h
@@ -0,0 +1,35 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _SPS30_H
+#define _SPS30_H
+
+#include <linux/types.h>
+
+struct sps30_state;
+struct sps30_ops {
+	int (*start_meas)(struct sps30_state *state);
+	int (*stop_meas)(struct sps30_state *state);
+	int (*read_meas)(struct sps30_state *state, __be32 *meas, size_t num);
+	int (*reset)(struct sps30_state *state);
+	int (*clean_fan)(struct sps30_state *state);
+	int (*read_cleaning_period)(struct sps30_state *state, __be32 *period);
+	int (*write_cleaning_period)(struct sps30_state *state, __be32 period);
+	int (*show_info)(struct sps30_state *state);
+};
+
+struct sps30_state {
+	/* serialize access to the device */
+	struct mutex lock;
+	struct device *dev;
+	int state;
+	/*
+	 * priv pointer is solely for serdev driver private data. We keep it
+	 * here because driver_data inside dev has been already used for iio and
+	 * struct serdev_device doesn't have one.
+	 */
+	void *priv;
+	const struct sps30_ops *ops;
+};
+
+int sps30_probe(struct device *dev, const char *name, void *priv, const struct sps30_ops *ops);
+
+#endif
diff --git a/drivers/iio/chemical/sps30_i2c.c b/drivers/iio/chemical/sps30_i2c.c
new file mode 100644
index 000000000..2aed483a2
--- /dev/null
+++ b/drivers/iio/chemical/sps30_i2c.c
@@ -0,0 +1,259 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sensirion SPS30 particulate matter sensor i2c driver
+ *
+ * Copyright (c) 2020 Tomasz Duszynski <tomasz.duszynski@octakon.com>
+ *
+ * I2C slave address: 0x69
+ */
+#include <asm/unaligned.h>
+#include <linux/crc8.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include "sps30.h"
+
+#define SPS30_I2C_CRC8_POLYNOMIAL 0x31
+/* max number of bytes needed to store PM measurements or serial string */
+#define SPS30_I2C_MAX_BUF_SIZE 48
+
+DECLARE_CRC8_TABLE(sps30_i2c_crc8_table);
+
+#define SPS30_I2C_START_MEAS 0x0010
+#define SPS30_I2C_STOP_MEAS 0x0104
+#define SPS30_I2C_READ_MEAS 0x0300
+#define SPS30_I2C_MEAS_READY 0x0202
+#define SPS30_I2C_RESET 0xd304
+#define SPS30_I2C_CLEAN_FAN 0x5607
+#define SPS30_I2C_PERIOD 0x8004
+#define SPS30_I2C_READ_SERIAL 0xd033
+#define SPS30_I2C_READ_VERSION 0xd100
+
+static int sps30_i2c_xfer(struct sps30_state *state, unsigned char *txbuf, size_t txsize,
+			  unsigned char *rxbuf, size_t rxsize)
+{
+	struct i2c_client *client = to_i2c_client(state->dev);
+	int ret;
+
+	/*
+	 * Sensor does not support repeated start so instead of
+	 * sending two i2c messages in a row we just send one by one.
+	 */
+	ret = i2c_master_send(client, txbuf, txsize);
+	if (ret < 0)
+		return ret;
+	if (ret != txsize)
+		return -EIO;
+
+	if (!rxsize)
+		return 0;
+
+	ret = i2c_master_recv(client, rxbuf, rxsize);
+	if (ret < 0)
+		return ret;
+	if (ret != rxsize)
+		return -EIO;
+
+	return 0;
+}
+
+static int sps30_i2c_command(struct sps30_state *state, u16 cmd, void *arg, size_t arg_size,
+			     void *rsp, size_t rsp_size)
+{
+	/*
+	 * Internally sensor stores measurements in a following manner:
+	 *
+	 * PM1: upper two bytes, crc8, lower two bytes, crc8
+	 * PM2P5: upper two bytes, crc8, lower two bytes, crc8
+	 * PM4: upper two bytes, crc8, lower two bytes, crc8
+	 * PM10: upper two bytes, crc8, lower two bytes, crc8
+	 *
+	 * What follows next are number concentration measurements and
+	 * typical particle size measurement which we omit.
+	 */
+	unsigned char buf[SPS30_I2C_MAX_BUF_SIZE];
+	unsigned char *tmp;
+	unsigned char crc;
+	size_t i;
+	int ret;
+
+	put_unaligned_be16(cmd, buf);
+	i = 2;
+
+	if (rsp) {
+		/* each two bytes are followed by a crc8 */
+		rsp_size += rsp_size / 2;
+	} else {
+		tmp = arg;
+
+		while (arg_size) {
+			buf[i] = *tmp++;
+			buf[i + 1] = *tmp++;
+			buf[i + 2] = crc8(sps30_i2c_crc8_table, buf + i, 2, CRC8_INIT_VALUE);
+			arg_size -= 2;
+			i += 3;
+		}
+	}
+
+	ret = sps30_i2c_xfer(state, buf, i, buf, rsp_size);
+	if (ret)
+		return ret;
+
+	/* validate received data and strip off crc bytes */
+	tmp = rsp;
+	for (i = 0; i < rsp_size; i += 3) {
+		crc = crc8(sps30_i2c_crc8_table, buf + i, 2, CRC8_INIT_VALUE);
+		if (crc != buf[i + 2]) {
+			dev_err(state->dev, "data integrity check failed\n");
+			return -EIO;
+		}
+
+		*tmp++ = buf[i];
+		*tmp++ = buf[i + 1];
+	}
+
+	return 0;
+}
+
+static int sps30_i2c_start_meas(struct sps30_state *state)
+{
+	/* request BE IEEE754 formatted data */
+	unsigned char buf[] = { 0x03, 0x00 };
+
+	return sps30_i2c_command(state, SPS30_I2C_START_MEAS, buf, sizeof(buf), NULL, 0);
+}
+
+static int sps30_i2c_stop_meas(struct sps30_state *state)
+{
+	return sps30_i2c_command(state, SPS30_I2C_STOP_MEAS, NULL, 0, NULL, 0);
+}
+
+static int sps30_i2c_reset(struct sps30_state *state)
+{
+	int ret;
+
+	ret = sps30_i2c_command(state, SPS30_I2C_RESET, NULL, 0, NULL, 0);
+	msleep(500);
+	/*
+	 * Power-on-reset causes sensor to produce some glitch on i2c bus and
+	 * some controllers end up in error state. Recover simply by placing
+	 * some data on the bus, for example STOP_MEAS command, which
+	 * is NOP in this case.
+	 */
+	sps30_i2c_stop_meas(state);
+
+	return ret;
+}
+
+static bool sps30_i2c_meas_ready(struct sps30_state *state)
+{
+	unsigned char buf[2];
+	int ret;
+
+	ret = sps30_i2c_command(state, SPS30_I2C_MEAS_READY, NULL, 0, buf, sizeof(buf));
+	if (ret)
+		return false;
+
+	return buf[1];
+}
+
+static int sps30_i2c_read_meas(struct sps30_state *state, __be32 *meas, size_t num)
+{
+	/* measurements are ready within a second */
+	if (msleep_interruptible(1000))
+		return -EINTR;
+
+	if (!sps30_i2c_meas_ready(state))
+		return -ETIMEDOUT;
+
+	return sps30_i2c_command(state, SPS30_I2C_READ_MEAS, NULL, 0, meas, sizeof(num) * num);
+}
+
+static int sps30_i2c_clean_fan(struct sps30_state *state)
+{
+	return sps30_i2c_command(state, SPS30_I2C_CLEAN_FAN, NULL, 0, NULL, 0);
+}
+
+static int sps30_i2c_read_cleaning_period(struct sps30_state *state, __be32 *period)
+{
+	return sps30_i2c_command(state, SPS30_I2C_PERIOD, NULL, 0, period, sizeof(*period));
+}
+
+static int sps30_i2c_write_cleaning_period(struct sps30_state *state, __be32 period)
+{
+	return sps30_i2c_command(state, SPS30_I2C_PERIOD, &period, sizeof(period), NULL, 0);
+}
+
+static int sps30_i2c_show_info(struct sps30_state *state)
+{
+	/* extra nul just in case */
+	unsigned char buf[32 + 1] = { 0x00 };
+	int ret;
+
+	ret = sps30_i2c_command(state, SPS30_I2C_READ_SERIAL, NULL, 0, buf, sizeof(buf) - 1);
+	if (ret)
+		return ret;
+
+	dev_info(state->dev, "serial number: %s\n", buf);
+
+	ret = sps30_i2c_command(state, SPS30_I2C_READ_VERSION, NULL, 0, buf, 2);
+	if (ret)
+		return ret;
+
+	dev_info(state->dev, "fw version: %u.%u\n", buf[0], buf[1]);
+
+	return 0;
+}
+
+static const struct sps30_ops sps30_i2c_ops = {
+	.start_meas = sps30_i2c_start_meas,
+	.stop_meas = sps30_i2c_stop_meas,
+	.read_meas = sps30_i2c_read_meas,
+	.reset = sps30_i2c_reset,
+	.clean_fan = sps30_i2c_clean_fan,
+	.read_cleaning_period = sps30_i2c_read_cleaning_period,
+	.write_cleaning_period = sps30_i2c_write_cleaning_period,
+	.show_info = sps30_i2c_show_info,
+};
+
+static int sps30_i2c_probe(struct i2c_client *client)
+{
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -EOPNOTSUPP;
+
+	crc8_populate_msb(sps30_i2c_crc8_table, SPS30_I2C_CRC8_POLYNOMIAL);
+
+	return sps30_probe(&client->dev, client->name, NULL, &sps30_i2c_ops);
+}
+
+static const struct i2c_device_id sps30_i2c_id[] = {
+	{ "sps30" },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sps30_i2c_id);
+
+static const struct of_device_id sps30_i2c_of_match[] = {
+	{ .compatible = "sensirion,sps30" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sps30_i2c_of_match);
+
+static struct i2c_driver sps30_i2c_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = sps30_i2c_of_match,
+	},
+	.id_table = sps30_i2c_id,
+	.probe_new = sps30_i2c_probe,
+};
+module_i2c_driver(sps30_i2c_driver);
+
+MODULE_AUTHOR("Tomasz Duszynski <tomasz.duszynski@octakon.com>");
+MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor i2c driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_SPS30);
diff --git a/drivers/iio/chemical/sps30_serial.c b/drivers/iio/chemical/sps30_serial.c
new file mode 100644
index 000000000..164f4b3e0
--- /dev/null
+++ b/drivers/iio/chemical/sps30_serial.c
@@ -0,0 +1,432 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Sensirion SPS30 particulate matter sensor serial driver
+ *
+ * Copyright (c) 2021 Tomasz Duszynski <tomasz.duszynski@octakon.com>
+ */
+#include <linux/completion.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/iio/iio.h>
+#include <linux/minmax.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/serdev.h>
+#include <linux/types.h>
+
+#include "sps30.h"
+
+#define SPS30_SERIAL_DEV_NAME "sps30"
+
+#define SPS30_SERIAL_SOF_EOF 0x7e
+#define SPS30_SERIAL_TIMEOUT msecs_to_jiffies(20)
+#define SPS30_SERIAL_MAX_BUF_SIZE 263
+#define SPS30_SERIAL_ESCAPE_CHAR 0x7d
+
+#define SPS30_SERIAL_FRAME_MIN_SIZE 7
+#define SPS30_SERIAL_FRAME_ADR_OFFSET 1
+#define SPS30_SERIAL_FRAME_CMD_OFFSET 2
+#define SPS30_SERIAL_FRAME_MOSI_LEN_OFFSET 3
+#define SPS30_SERIAL_FRAME_MISO_STATE_OFFSET 3
+#define SPS30_SERIAL_FRAME_MISO_LEN_OFFSET 4
+#define SPS30_SERIAL_FRAME_MISO_DATA_OFFSET 5
+
+#define SPS30_SERIAL_START_MEAS 0x00
+#define SPS30_SERIAL_STOP_MEAS 0x01
+#define SPS30_SERIAL_READ_MEAS 0x03
+#define SPS30_SERIAL_RESET 0xd3
+#define SPS30_SERIAL_CLEAN_FAN 0x56
+#define SPS30_SERIAL_PERIOD 0x80
+#define SPS30_SERIAL_DEV_INFO 0xd0
+#define SPS30_SERIAL_READ_VERSION 0xd1
+
+struct sps30_serial_priv {
+	struct completion new_frame;
+	unsigned char buf[SPS30_SERIAL_MAX_BUF_SIZE];
+	size_t num;
+	bool escaped;
+	bool done;
+};
+
+static int sps30_serial_xfer(struct sps30_state *state, const unsigned char *buf, size_t size)
+{
+	struct serdev_device *serdev = to_serdev_device(state->dev);
+	struct sps30_serial_priv *priv = state->priv;
+	int ret;
+
+	priv->num = 0;
+	priv->escaped = false;
+	priv->done = false;
+
+	ret = serdev_device_write(serdev, buf, size, SPS30_SERIAL_TIMEOUT);
+	if (ret < 0)
+		return ret;
+	if (ret != size)
+		return -EIO;
+
+	ret = wait_for_completion_interruptible_timeout(&priv->new_frame, SPS30_SERIAL_TIMEOUT);
+	if (ret < 0)
+		return ret;
+	if (!ret)
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static const struct {
+	unsigned char byte;
+	unsigned char byte2;
+} sps30_serial_bytes[] = {
+	{ 0x11, 0x31 },
+	{ 0x13, 0x33 },
+	{ 0x7e, 0x5e },
+	{ 0x7d, 0x5d },
+};
+
+static int sps30_serial_put_byte(unsigned char *buf, unsigned char byte)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(sps30_serial_bytes); i++) {
+		if (sps30_serial_bytes[i].byte != byte)
+			continue;
+
+		buf[0] = SPS30_SERIAL_ESCAPE_CHAR;
+		buf[1] = sps30_serial_bytes[i].byte2;
+
+		return 2;
+	}
+
+	buf[0] = byte;
+
+	return 1;
+}
+
+static char sps30_serial_get_byte(bool escaped, unsigned char byte2)
+{
+	int i;
+
+	if (!escaped)
+		return byte2;
+
+	for (i = 0; i < ARRAY_SIZE(sps30_serial_bytes); i++) {
+		if (sps30_serial_bytes[i].byte2 != byte2)
+			continue;
+
+		return sps30_serial_bytes[i].byte;
+	}
+
+	return 0;
+}
+
+static unsigned char sps30_serial_calc_chksum(const unsigned char *buf, size_t num)
+{
+	unsigned int chksum = 0;
+	size_t i;
+
+	for (i = 0; i < num; i++)
+		chksum += buf[i];
+
+	return ~chksum;
+}
+
+static int sps30_serial_prep_frame(unsigned char *buf, unsigned char cmd,
+				   const unsigned char *arg, size_t arg_size)
+{
+	unsigned char chksum;
+	int num = 0;
+	size_t i;
+
+	buf[num++] = SPS30_SERIAL_SOF_EOF;
+	buf[num++] = 0;
+	num += sps30_serial_put_byte(buf + num, cmd);
+	num += sps30_serial_put_byte(buf + num, arg_size);
+
+	for (i = 0; i < arg_size; i++)
+		num += sps30_serial_put_byte(buf + num, arg[i]);
+
+	/* SOF isn't checksummed */
+	chksum = sps30_serial_calc_chksum(buf + 1, num - 1);
+	num += sps30_serial_put_byte(buf + num, chksum);
+	buf[num++] = SPS30_SERIAL_SOF_EOF;
+
+	return num;
+}
+
+static bool sps30_serial_frame_valid(struct sps30_state *state, const unsigned char *buf)
+{
+	struct sps30_serial_priv *priv = state->priv;
+	unsigned char chksum;
+
+	if ((priv->num < SPS30_SERIAL_FRAME_MIN_SIZE) ||
+	    (priv->num != SPS30_SERIAL_FRAME_MIN_SIZE +
+	     priv->buf[SPS30_SERIAL_FRAME_MISO_LEN_OFFSET])) {
+		dev_err(state->dev, "frame has invalid number of bytes\n");
+		return false;
+	}
+
+	if ((priv->buf[SPS30_SERIAL_FRAME_ADR_OFFSET] != buf[SPS30_SERIAL_FRAME_ADR_OFFSET]) ||
+	    (priv->buf[SPS30_SERIAL_FRAME_CMD_OFFSET] != buf[SPS30_SERIAL_FRAME_CMD_OFFSET])) {
+		dev_err(state->dev, "frame has wrong ADR and CMD bytes\n");
+		return false;
+	}
+
+	if (priv->buf[SPS30_SERIAL_FRAME_MISO_STATE_OFFSET]) {
+		dev_err(state->dev, "frame with non-zero state received (0x%02x)\n",
+			priv->buf[SPS30_SERIAL_FRAME_MISO_STATE_OFFSET]);
+		return false;
+	}
+
+	/* SOF, checksum and EOF are not checksummed */
+	chksum = sps30_serial_calc_chksum(priv->buf + 1, priv->num - 3);
+	if (priv->buf[priv->num - 2] != chksum) {
+		dev_err(state->dev, "frame integrity check failed\n");
+		return false;
+	}
+
+	return true;
+}
+
+static int sps30_serial_command(struct sps30_state *state, unsigned char cmd,
+				const void *arg, size_t arg_size, void *rsp, size_t rsp_size)
+{
+	struct sps30_serial_priv *priv = state->priv;
+	unsigned char buf[SPS30_SERIAL_MAX_BUF_SIZE];
+	int ret, size;
+
+	size = sps30_serial_prep_frame(buf, cmd, arg, arg_size);
+	ret = sps30_serial_xfer(state, buf, size);
+	if (ret)
+		return ret;
+
+	if (!sps30_serial_frame_valid(state, buf))
+		return -EIO;
+
+	if (rsp) {
+		rsp_size = min_t(size_t, priv->buf[SPS30_SERIAL_FRAME_MISO_LEN_OFFSET], rsp_size);
+		memcpy(rsp, &priv->buf[SPS30_SERIAL_FRAME_MISO_DATA_OFFSET], rsp_size);
+	}
+
+	return rsp_size;
+}
+
+static int sps30_serial_receive_buf(struct serdev_device *serdev,
+				    const unsigned char *buf, size_t size)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(&serdev->dev);
+	struct sps30_serial_priv *priv;
+	struct sps30_state *state;
+	unsigned char byte;
+	size_t i;
+
+	if (!indio_dev)
+		return 0;
+
+	state = iio_priv(indio_dev);
+	priv = state->priv;
+
+	/* just in case device put some unexpected data on the bus */
+	if (priv->done)
+		return size;
+
+	/* wait for the start of frame */
+	if (!priv->num && size && buf[0] != SPS30_SERIAL_SOF_EOF)
+		return 1;
+
+	if (priv->num + size >= ARRAY_SIZE(priv->buf))
+		size = ARRAY_SIZE(priv->buf) - priv->num;
+
+	for (i = 0; i < size; i++) {
+		byte = buf[i];
+		/* remove stuffed bytes on-the-fly */
+		if (byte == SPS30_SERIAL_ESCAPE_CHAR) {
+			priv->escaped = true;
+			continue;
+		}
+
+		byte = sps30_serial_get_byte(priv->escaped, byte);
+		if (priv->escaped && !byte)
+			dev_warn(state->dev, "unrecognized escaped char (0x%02x)\n", byte);
+
+		priv->buf[priv->num++] = byte;
+
+		/* EOF received */
+		if (!priv->escaped && byte == SPS30_SERIAL_SOF_EOF) {
+			if (priv->num < SPS30_SERIAL_FRAME_MIN_SIZE)
+				continue;
+
+			priv->done = true;
+			complete(&priv->new_frame);
+			i++;
+			break;
+		}
+
+		priv->escaped = false;
+	}
+
+	return i;
+}
+
+static const struct serdev_device_ops sps30_serial_device_ops = {
+	.receive_buf = sps30_serial_receive_buf,
+	.write_wakeup = serdev_device_write_wakeup,
+};
+
+static int sps30_serial_start_meas(struct sps30_state *state)
+{
+	/* request BE IEEE754 formatted data */
+	unsigned char buf[] = { 0x01, 0x03 };
+
+	return sps30_serial_command(state, SPS30_SERIAL_START_MEAS, buf, sizeof(buf), NULL, 0);
+}
+
+static int sps30_serial_stop_meas(struct sps30_state *state)
+{
+	return sps30_serial_command(state, SPS30_SERIAL_STOP_MEAS, NULL, 0, NULL, 0);
+}
+
+static int sps30_serial_reset(struct sps30_state *state)
+{
+	int ret;
+
+	ret = sps30_serial_command(state, SPS30_SERIAL_RESET, NULL, 0, NULL, 0);
+	msleep(500);
+
+	return ret;
+}
+
+static int sps30_serial_read_meas(struct sps30_state *state, __be32 *meas, size_t num)
+{
+	int ret;
+
+	/* measurements are ready within a second */
+	if (msleep_interruptible(1000))
+		return -EINTR;
+
+	ret = sps30_serial_command(state, SPS30_SERIAL_READ_MEAS, NULL, 0, meas, num * sizeof(num));
+	if (ret < 0)
+		return ret;
+	/* if measurements aren't ready sensor returns empty frame */
+	if (ret == SPS30_SERIAL_FRAME_MIN_SIZE)
+		return -ETIMEDOUT;
+	if (ret != num * sizeof(*meas))
+		return -EIO;
+
+	return 0;
+}
+
+static int sps30_serial_clean_fan(struct sps30_state *state)
+{
+	return sps30_serial_command(state, SPS30_SERIAL_CLEAN_FAN, NULL, 0, NULL, 0);
+}
+
+static int sps30_serial_read_cleaning_period(struct sps30_state *state, __be32 *period)
+{
+	unsigned char buf[] = { 0x00 };
+	int ret;
+
+	ret = sps30_serial_command(state, SPS30_SERIAL_PERIOD, buf, sizeof(buf),
+				   period, sizeof(*period));
+	if (ret < 0)
+		return ret;
+	if (ret != sizeof(*period))
+		return -EIO;
+
+	return 0;
+}
+
+static int sps30_serial_write_cleaning_period(struct sps30_state *state, __be32 period)
+{
+	unsigned char buf[5] = { 0x00 };
+
+	memcpy(buf + 1, &period, sizeof(period));
+
+	return sps30_serial_command(state, SPS30_SERIAL_PERIOD, buf, sizeof(buf), NULL, 0);
+}
+
+static int sps30_serial_show_info(struct sps30_state *state)
+{
+	/*
+	 * tell device do return serial number and add extra nul byte just in case
+	 * serial number isn't a valid string
+	 */
+	unsigned char buf[32 + 1] = { 0x03 };
+	struct device *dev = state->dev;
+	int ret;
+
+	ret = sps30_serial_command(state, SPS30_SERIAL_DEV_INFO, buf, 1, buf, sizeof(buf) - 1);
+	if (ret < 0)
+		return ret;
+	if (ret != sizeof(buf) - 1)
+		return -EIO;
+
+	dev_info(dev, "serial number: %s\n", buf);
+
+	ret = sps30_serial_command(state, SPS30_SERIAL_READ_VERSION, NULL, 0, buf, sizeof(buf) - 1);
+	if (ret < 0)
+		return ret;
+	if (ret < 2)
+		return -EIO;
+
+	dev_info(dev, "fw version: %u.%u\n", buf[0], buf[1]);
+
+	return 0;
+}
+
+static const struct sps30_ops sps30_serial_ops = {
+	.start_meas = sps30_serial_start_meas,
+	.stop_meas = sps30_serial_stop_meas,
+	.read_meas = sps30_serial_read_meas,
+	.reset = sps30_serial_reset,
+	.clean_fan = sps30_serial_clean_fan,
+	.read_cleaning_period = sps30_serial_read_cleaning_period,
+	.write_cleaning_period = sps30_serial_write_cleaning_period,
+	.show_info = sps30_serial_show_info,
+};
+
+static int sps30_serial_probe(struct serdev_device *serdev)
+{
+	struct device *dev = &serdev->dev;
+	struct sps30_serial_priv *priv;
+	int ret;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	init_completion(&priv->new_frame);
+	serdev_device_set_client_ops(serdev, &sps30_serial_device_ops);
+
+	ret = devm_serdev_device_open(dev, serdev);
+	if (ret)
+		return ret;
+
+	serdev_device_set_baudrate(serdev, 115200);
+	serdev_device_set_flow_control(serdev, false);
+
+	ret = serdev_device_set_parity(serdev, SERDEV_PARITY_NONE);
+	if (ret)
+		return ret;
+
+	return sps30_probe(dev, SPS30_SERIAL_DEV_NAME, priv, &sps30_serial_ops);
+}
+
+static const struct of_device_id sps30_serial_of_match[] = {
+	{ .compatible = "sensirion,sps30" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sps30_serial_of_match);
+
+static struct serdev_device_driver sps30_serial_driver = {
+	.driver = {
+		.name = KBUILD_MODNAME,
+		.of_match_table = sps30_serial_of_match,
+	},
+	.probe = sps30_serial_probe,
+};
+module_serdev_device_driver(sps30_serial_driver);
+
+MODULE_AUTHOR("Tomasz Duszynski <tomasz.duszynski@octakon.com>");
+MODULE_DESCRIPTION("Sensirion SPS30 particulate matter sensor serial driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_SPS30);
diff --git a/drivers/iio/chemical/sunrise_co2.c b/drivers/iio/chemical/sunrise_co2.c
new file mode 100644
index 000000000..8440dc0c7
--- /dev/null
+++ b/drivers/iio/chemical/sunrise_co2.c
@@ -0,0 +1,537 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Senseair Sunrise 006-0-0007 CO2 sensor driver.
+ *
+ * Copyright (C) 2021 Jacopo Mondi
+ *
+ * List of features not yet supported by the driver:
+ * - controllable EN pin
+ * - single-shot operations using the nDRY pin.
+ * - ABC/target calibration
+ */
+
+#include <linux/bitops.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/time64.h>
+
+#include <linux/iio/iio.h>
+
+#define DRIVER_NAME "sunrise_co2"
+
+#define SUNRISE_ERROR_STATUS_REG		0x00
+#define SUNRISE_CO2_FILTERED_COMP_REG		0x06
+#define SUNRISE_CHIP_TEMPERATURE_REG		0x08
+#define SUNRISE_CALIBRATION_STATUS_REG		0x81
+#define SUNRISE_CALIBRATION_COMMAND_REG		0x82
+#define SUNRISE_CALIBRATION_FACTORY_CMD		0x7c02
+#define SUNRISE_CALIBRATION_BACKGROUND_CMD	0x7c06
+/*
+ * The calibration timeout is not characterized in the datasheet.
+ * Use 30 seconds as a reasonable upper limit.
+ */
+#define SUNRISE_CALIBRATION_TIMEOUT_US		(30 * USEC_PER_SEC)
+
+struct sunrise_dev {
+	struct i2c_client *client;
+	struct regmap *regmap;
+	/* Protects access to IIO attributes. */
+	struct mutex lock;
+	bool ignore_nak;
+};
+
+/* Custom regmap read/write operations: perform unlocked access to the i2c bus. */
+
+static int sunrise_regmap_read(void *context, const void *reg_buf,
+			       size_t reg_size, void *val_buf, size_t val_size)
+{
+	struct i2c_client *client = context;
+	struct sunrise_dev *sunrise = i2c_get_clientdata(client);
+	union i2c_smbus_data data;
+	int ret;
+
+	if (reg_size != 1 || !val_size)
+		return -EINVAL;
+
+	memset(&data, 0, sizeof(data));
+	data.block[0] = val_size;
+
+	/*
+	 * Wake up sensor by sending sensor address: START, sensor address,
+	 * STOP. Sensor will not ACK this byte.
+	 *
+	 * The chip enters a low power state after 15ms without
+	 * communications or after a complete read/write sequence.
+	 */
+	__i2c_smbus_xfer(client->adapter, client->addr,
+			 sunrise->ignore_nak ? I2C_M_IGNORE_NAK : 0,
+			 I2C_SMBUS_WRITE, 0, I2C_SMBUS_BYTE_DATA, &data);
+
+	usleep_range(500, 1500);
+
+	ret = __i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			       I2C_SMBUS_READ, ((u8 *)reg_buf)[0],
+			       I2C_SMBUS_I2C_BLOCK_DATA, &data);
+	if (ret < 0)
+		return ret;
+
+	memcpy(val_buf, &data.block[1], data.block[0]);
+
+	return 0;
+}
+
+static int sunrise_regmap_write(void *context, const void *val_buf, size_t count)
+{
+	struct i2c_client *client = context;
+	struct sunrise_dev *sunrise = i2c_get_clientdata(client);
+	union i2c_smbus_data data;
+
+	/* Discard reg address from values count. */
+	if (!count)
+		return -EINVAL;
+	count--;
+
+	memset(&data, 0, sizeof(data));
+	data.block[0] = count;
+	memcpy(&data.block[1], (u8 *)val_buf + 1, count);
+
+	__i2c_smbus_xfer(client->adapter, client->addr,
+			 sunrise->ignore_nak ? I2C_M_IGNORE_NAK : 0,
+			 I2C_SMBUS_WRITE, 0, I2C_SMBUS_BYTE_DATA, &data);
+
+	usleep_range(500, 1500);
+
+	return __i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+				I2C_SMBUS_WRITE, ((u8 *)val_buf)[0],
+				I2C_SMBUS_I2C_BLOCK_DATA, &data);
+}
+
+/*
+ * Sunrise i2c read/write operations: lock the i2c segment to avoid losing the
+ * wake up session. Use custom regmap operations that perform unlocked access to
+ * the i2c bus.
+ */
+static int sunrise_read_byte(struct sunrise_dev *sunrise, u8 reg)
+{
+	const struct i2c_client *client = sunrise->client;
+	const struct device *dev = &client->dev;
+	unsigned int val;
+	int ret;
+
+	i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
+	ret = regmap_read(sunrise->regmap, reg, &val);
+	i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
+	if (ret) {
+		dev_err(dev, "Read byte failed: reg 0x%02x (%d)\n", reg, ret);
+		return ret;
+	}
+
+	return val;
+}
+
+static int sunrise_read_word(struct sunrise_dev *sunrise, u8 reg, u16 *val)
+{
+	const struct i2c_client *client = sunrise->client;
+	const struct device *dev = &client->dev;
+	__be16 be_val;
+	int ret;
+
+	i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
+	ret = regmap_bulk_read(sunrise->regmap, reg, &be_val, sizeof(be_val));
+	i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
+	if (ret) {
+		dev_err(dev, "Read word failed: reg 0x%02x (%d)\n", reg, ret);
+		return ret;
+	}
+
+	*val = be16_to_cpu(be_val);
+
+	return 0;
+}
+
+static int sunrise_write_byte(struct sunrise_dev *sunrise, u8 reg, u8 val)
+{
+	const struct i2c_client *client = sunrise->client;
+	const struct device *dev = &client->dev;
+	int ret;
+
+	i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
+	ret = regmap_write(sunrise->regmap, reg, val);
+	i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
+	if (ret)
+		dev_err(dev, "Write byte failed: reg 0x%02x (%d)\n", reg, ret);
+
+	return ret;
+}
+
+static int sunrise_write_word(struct sunrise_dev *sunrise, u8 reg, u16 data)
+{
+	const struct i2c_client *client = sunrise->client;
+	const struct device *dev = &client->dev;
+	__be16 be_data = cpu_to_be16(data);
+	int ret;
+
+	i2c_lock_bus(client->adapter, I2C_LOCK_SEGMENT);
+	ret = regmap_bulk_write(sunrise->regmap, reg, &be_data, sizeof(be_data));
+	i2c_unlock_bus(client->adapter, I2C_LOCK_SEGMENT);
+	if (ret)
+		dev_err(dev, "Write word failed: reg 0x%02x (%d)\n", reg, ret);
+
+	return ret;
+}
+
+/* Trigger a calibration cycle. */
+
+enum {
+	SUNRISE_CALIBRATION_FACTORY,
+	SUNRISE_CALIBRATION_BACKGROUND,
+};
+
+static const struct sunrise_calib_data {
+	u16 cmd;
+	u8 bit;
+	const char * const name;
+} calib_data[] = {
+	[SUNRISE_CALIBRATION_FACTORY] = {
+		SUNRISE_CALIBRATION_FACTORY_CMD,
+		BIT(2),
+		"factory_calibration",
+	},
+	[SUNRISE_CALIBRATION_BACKGROUND] = {
+		SUNRISE_CALIBRATION_BACKGROUND_CMD,
+		BIT(5),
+		"background_calibration",
+	},
+};
+
+static int sunrise_calibrate(struct sunrise_dev *sunrise,
+			     const struct sunrise_calib_data *data)
+{
+	unsigned int status;
+	int ret;
+
+	/* Reset the calibration status reg. */
+	ret = sunrise_write_byte(sunrise, SUNRISE_CALIBRATION_STATUS_REG, 0x00);
+	if (ret)
+		return ret;
+
+	/* Write a calibration command and poll the calibration status bit. */
+	ret = sunrise_write_word(sunrise, SUNRISE_CALIBRATION_COMMAND_REG, data->cmd);
+	if (ret)
+		return ret;
+
+	dev_dbg(&sunrise->client->dev, "%s in progress\n", data->name);
+
+	/*
+	 * Calibration takes several seconds, so the sleep time between reads
+	 * can be pretty relaxed.
+	 */
+	return read_poll_timeout(sunrise_read_byte, status, status & data->bit,
+				 200000, SUNRISE_CALIBRATION_TIMEOUT_US, false,
+				 sunrise, SUNRISE_CALIBRATION_STATUS_REG);
+}
+
+static ssize_t sunrise_cal_factory_write(struct iio_dev *iiodev,
+					 uintptr_t private,
+					 const struct iio_chan_spec *chan,
+					 const char *buf, size_t len)
+{
+	struct sunrise_dev *sunrise = iio_priv(iiodev);
+	bool enable;
+	int ret;
+
+	ret = kstrtobool(buf, &enable);
+	if (ret)
+		return ret;
+
+	if (!enable)
+		return len;
+
+	mutex_lock(&sunrise->lock);
+	ret = sunrise_calibrate(sunrise, &calib_data[SUNRISE_CALIBRATION_FACTORY]);
+	mutex_unlock(&sunrise->lock);
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+static ssize_t sunrise_cal_background_write(struct iio_dev *iiodev,
+					    uintptr_t private,
+					    const struct iio_chan_spec *chan,
+					    const char *buf, size_t len)
+{
+	struct sunrise_dev *sunrise = iio_priv(iiodev);
+	bool enable;
+	int ret;
+
+	ret = kstrtobool(buf, &enable);
+	if (ret)
+		return ret;
+
+	if (!enable)
+		return len;
+
+	mutex_lock(&sunrise->lock);
+	ret = sunrise_calibrate(sunrise, &calib_data[SUNRISE_CALIBRATION_BACKGROUND]);
+	mutex_unlock(&sunrise->lock);
+	if (ret)
+		return ret;
+
+	return len;
+}
+
+ /* Enumerate and retrieve the chip error status. */
+enum {
+	SUNRISE_ERROR_FATAL,
+	SUNRISE_ERROR_I2C,
+	SUNRISE_ERROR_ALGORITHM,
+	SUNRISE_ERROR_CALIBRATION,
+	SUNRISE_ERROR_SELF_DIAGNOSTIC,
+	SUNRISE_ERROR_OUT_OF_RANGE,
+	SUNRISE_ERROR_MEMORY,
+	SUNRISE_ERROR_NO_MEASUREMENT,
+	SUNRISE_ERROR_LOW_VOLTAGE,
+	SUNRISE_ERROR_MEASUREMENT_TIMEOUT,
+};
+
+static const char * const sunrise_error_statuses[] = {
+	[SUNRISE_ERROR_FATAL] = "error_fatal",
+	[SUNRISE_ERROR_I2C] = "error_i2c",
+	[SUNRISE_ERROR_ALGORITHM] = "error_algorithm",
+	[SUNRISE_ERROR_CALIBRATION] = "error_calibration",
+	[SUNRISE_ERROR_SELF_DIAGNOSTIC] = "error_self_diagnostic",
+	[SUNRISE_ERROR_OUT_OF_RANGE] = "error_out_of_range",
+	[SUNRISE_ERROR_MEMORY] = "error_memory",
+	[SUNRISE_ERROR_NO_MEASUREMENT] = "error_no_measurement",
+	[SUNRISE_ERROR_LOW_VOLTAGE] = "error_low_voltage",
+	[SUNRISE_ERROR_MEASUREMENT_TIMEOUT] = "error_measurement_timeout",
+};
+
+static const struct iio_enum sunrise_error_statuses_enum = {
+	.items = sunrise_error_statuses,
+	.num_items = ARRAY_SIZE(sunrise_error_statuses),
+};
+
+static ssize_t sunrise_error_status_read(struct iio_dev *iiodev,
+					 uintptr_t private,
+					 const struct iio_chan_spec *chan,
+					 char *buf)
+{
+	struct sunrise_dev *sunrise = iio_priv(iiodev);
+	unsigned long errors;
+	ssize_t len = 0;
+	u16 value;
+	int ret;
+	u8 i;
+
+	mutex_lock(&sunrise->lock);
+	ret = sunrise_read_word(sunrise, SUNRISE_ERROR_STATUS_REG, &value);
+	if (ret) {
+		mutex_unlock(&sunrise->lock);
+		return ret;
+	}
+
+	errors = value;
+	for_each_set_bit(i, &errors, ARRAY_SIZE(sunrise_error_statuses))
+		len += sysfs_emit_at(buf, len, "%s ", sunrise_error_statuses[i]);
+
+	if (len)
+		buf[len - 1] = '\n';
+
+	mutex_unlock(&sunrise->lock);
+
+	return len;
+}
+
+static const struct iio_chan_spec_ext_info sunrise_concentration_ext_info[] = {
+	/* Calibration triggers. */
+	{
+		.name = "calibration_factory",
+		.write = sunrise_cal_factory_write,
+		.shared = IIO_SEPARATE,
+	},
+	{
+		.name = "calibration_background",
+		.write = sunrise_cal_background_write,
+		.shared = IIO_SEPARATE,
+	},
+
+	/* Error statuses. */
+	{
+		.name = "error_status",
+		.read = sunrise_error_status_read,
+		.shared = IIO_SHARED_BY_ALL,
+	},
+	{
+		.name = "error_status_available",
+		.shared = IIO_SHARED_BY_ALL,
+		.read = iio_enum_available_read,
+		.private = (uintptr_t)&sunrise_error_statuses_enum,
+	},
+	{}
+};
+
+static const struct iio_chan_spec sunrise_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.modified = 1,
+		.channel2 = IIO_MOD_CO2,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.ext_info = sunrise_concentration_ext_info,
+	},
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static int sunrise_read_raw(struct iio_dev *iio_dev,
+			    const struct iio_chan_spec *chan,
+			    int *val, int *val2, long mask)
+{
+	struct sunrise_dev *sunrise = iio_priv(iio_dev);
+	u16 value;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_CONCENTRATION:
+			mutex_lock(&sunrise->lock);
+			ret = sunrise_read_word(sunrise, SUNRISE_CO2_FILTERED_COMP_REG,
+						&value);
+			mutex_unlock(&sunrise->lock);
+
+			if (ret)
+				return ret;
+
+			*val = value;
+			return IIO_VAL_INT;
+
+		case IIO_TEMP:
+			mutex_lock(&sunrise->lock);
+			ret = sunrise_read_word(sunrise, SUNRISE_CHIP_TEMPERATURE_REG,
+						&value);
+			mutex_unlock(&sunrise->lock);
+
+			if (ret)
+				return ret;
+
+			*val = value;
+			return IIO_VAL_INT;
+
+		default:
+			return -EINVAL;
+		}
+
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_CONCENTRATION:
+			/*
+			 * 1 / 10^4 to comply with IIO scale for CO2
+			 * (percentage). The chip CO2 reading range is [400 -
+			 * 5000] ppm which corresponds to [0,004 - 0,5] %.
+			 */
+			*val = 1;
+			*val2 = 10000;
+			return IIO_VAL_FRACTIONAL;
+
+		case IIO_TEMP:
+			/* x10 to comply with IIO scale (millidegrees celsius). */
+			*val = 10;
+			return IIO_VAL_INT;
+
+		default:
+			return -EINVAL;
+		}
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info sunrise_info = {
+	.read_raw = sunrise_read_raw,
+};
+
+static const struct regmap_bus sunrise_regmap_bus = {
+	.read = sunrise_regmap_read,
+	.write = sunrise_regmap_write,
+};
+
+static const struct regmap_config sunrise_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int sunrise_probe(struct i2c_client *client)
+{
+	struct sunrise_dev *sunrise;
+	struct iio_dev *iio_dev;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA |
+						      I2C_FUNC_SMBUS_BLOCK_DATA)) {
+		dev_err(&client->dev,
+			"Adapter does not support required functionalities\n");
+		return -EOPNOTSUPP;
+	}
+
+	iio_dev = devm_iio_device_alloc(&client->dev, sizeof(*sunrise));
+	if (!iio_dev)
+		return -ENOMEM;
+
+	sunrise = iio_priv(iio_dev);
+	sunrise->client = client;
+	mutex_init(&sunrise->lock);
+
+	i2c_set_clientdata(client, sunrise);
+
+	sunrise->regmap = devm_regmap_init(&client->dev, &sunrise_regmap_bus,
+					   client, &sunrise_regmap_config);
+	if (IS_ERR(sunrise->regmap)) {
+		dev_err(&client->dev, "Failed to initialize regmap\n");
+		return PTR_ERR(sunrise->regmap);
+	}
+
+	/*
+	 * The chip nacks the wake up message. If the adapter does not support
+	 * protocol mangling do not set the I2C_M_IGNORE_NAK flag at the expense
+	 * of possible cruft in the logs.
+	 */
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_PROTOCOL_MANGLING))
+		sunrise->ignore_nak = true;
+
+	iio_dev->info = &sunrise_info;
+	iio_dev->name = DRIVER_NAME;
+	iio_dev->channels = sunrise_channels;
+	iio_dev->num_channels = ARRAY_SIZE(sunrise_channels);
+	iio_dev->modes = INDIO_DIRECT_MODE;
+
+	return devm_iio_device_register(&client->dev, iio_dev);
+}
+
+static const struct of_device_id sunrise_of_match[] = {
+	{ .compatible = "senseair,sunrise-006-0-0007" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sunrise_of_match);
+
+static struct i2c_driver sunrise_driver = {
+	.driver = {
+		.name = DRIVER_NAME,
+		.of_match_table = sunrise_of_match,
+	},
+	.probe_new = sunrise_probe,
+};
+module_i2c_driver(sunrise_driver);
+
+MODULE_AUTHOR("Jacopo Mondi <jacopo@jmondi.org>");
+MODULE_DESCRIPTION("Senseair Sunrise 006-0-0007 CO2 sensor IIO driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/chemical/vz89x.c b/drivers/iio/chemical/vz89x.c
new file mode 100644
index 000000000..e7e1c74a3
--- /dev/null
+++ b/drivers/iio/chemical/vz89x.c
@@ -0,0 +1,412 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * vz89x.c - Support for SGX Sensortech MiCS VZ89X VOC sensors
+ *
+ * Copyright (C) 2015-2018
+ * Author: Matt Ranostay <matt.ranostay@konsulko.com>
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define VZ89X_REG_MEASUREMENT		0x09
+#define VZ89X_REG_MEASUREMENT_RD_SIZE	6
+#define VZ89X_REG_MEASUREMENT_WR_SIZE	3
+
+#define VZ89X_VOC_CO2_IDX		0
+#define VZ89X_VOC_SHORT_IDX		1
+#define VZ89X_VOC_TVOC_IDX		2
+#define VZ89X_VOC_RESISTANCE_IDX	3
+
+#define VZ89TE_REG_MEASUREMENT		0x0c
+#define VZ89TE_REG_MEASUREMENT_RD_SIZE	7
+#define VZ89TE_REG_MEASUREMENT_WR_SIZE	6
+
+#define VZ89TE_VOC_TVOC_IDX		0
+#define VZ89TE_VOC_CO2_IDX		1
+#define VZ89TE_VOC_RESISTANCE_IDX	2
+
+enum {
+	VZ89X,
+	VZ89TE,
+};
+
+struct vz89x_chip_data;
+
+struct vz89x_data {
+	struct i2c_client *client;
+	const struct vz89x_chip_data *chip;
+	struct mutex lock;
+	int (*xfer)(struct vz89x_data *data, u8 cmd);
+
+	bool is_valid;
+	unsigned long last_update;
+	u8 buffer[VZ89TE_REG_MEASUREMENT_RD_SIZE];
+};
+
+struct vz89x_chip_data {
+	bool (*valid)(struct vz89x_data *data);
+	const struct iio_chan_spec *channels;
+	u8 num_channels;
+
+	u8 cmd;
+	u8 read_size;
+	u8 write_size;
+};
+
+static const struct iio_chan_spec vz89x_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_CO2,
+		.modified = 1,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_RAW),
+		.address = VZ89X_VOC_CO2_IDX,
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_VOC,
+		.modified = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.address = VZ89X_VOC_SHORT_IDX,
+		.extend_name = "short",
+	},
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_VOC,
+		.modified = 1,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_RAW),
+		.address = VZ89X_VOC_TVOC_IDX,
+	},
+	{
+		.type = IIO_RESISTANCE,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.address = VZ89X_VOC_RESISTANCE_IDX,
+		.scan_index = -1,
+		.scan_type = {
+			.endianness = IIO_LE,
+		},
+	},
+};
+
+static const struct iio_chan_spec vz89te_channels[] = {
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_VOC,
+		.modified = 1,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_RAW),
+		.address = VZ89TE_VOC_TVOC_IDX,
+	},
+
+	{
+		.type = IIO_CONCENTRATION,
+		.channel2 = IIO_MOD_CO2,
+		.modified = 1,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_RAW),
+		.address = VZ89TE_VOC_CO2_IDX,
+	},
+	{
+		.type = IIO_RESISTANCE,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.address = VZ89TE_VOC_RESISTANCE_IDX,
+		.scan_index = -1,
+		.scan_type = {
+			.endianness = IIO_BE,
+		},
+	},
+};
+
+static IIO_CONST_ATTR(in_concentration_co2_scale, "0.00000698689");
+static IIO_CONST_ATTR(in_concentration_voc_scale, "0.00000000436681223");
+
+static struct attribute *vz89x_attributes[] = {
+	&iio_const_attr_in_concentration_co2_scale.dev_attr.attr,
+	&iio_const_attr_in_concentration_voc_scale.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group vz89x_attrs_group = {
+	.attrs = vz89x_attributes,
+};
+
+/*
+ * Chipset sometime updates in the middle of a reading causing it to reset the
+ * data pointer, and causing invalid reading of previous data.
+ * We can check for this by reading MSB of the resistance reading that is
+ * always zero, and by also confirming the VOC_short isn't zero.
+ */
+
+static bool vz89x_measurement_is_valid(struct vz89x_data *data)
+{
+	if (data->buffer[VZ89X_VOC_SHORT_IDX] == 0)
+		return true;
+
+	return !!(data->buffer[data->chip->read_size - 1] > 0);
+}
+
+/* VZ89TE device has a modified CRC-8 two complement check */
+static bool vz89te_measurement_is_valid(struct vz89x_data *data)
+{
+	u8 crc = 0;
+	int i, sum = 0;
+
+	for (i = 0; i < (data->chip->read_size - 1); i++) {
+		sum = crc + data->buffer[i];
+		crc = sum;
+		crc += sum / 256;
+	}
+
+	return !((0xff - crc) == data->buffer[data->chip->read_size - 1]);
+}
+
+static int vz89x_i2c_xfer(struct vz89x_data *data, u8 cmd)
+{
+	const struct vz89x_chip_data *chip = data->chip;
+	struct i2c_client *client = data->client;
+	struct i2c_msg msg[2];
+	int ret;
+	u8 buf[6] = { cmd, 0, 0, 0, 0, 0xf3 };
+
+	msg[0].addr = client->addr;
+	msg[0].flags = client->flags;
+	msg[0].len = chip->write_size;
+	msg[0].buf  = (char *) &buf;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = client->flags | I2C_M_RD;
+	msg[1].len = chip->read_size;
+	msg[1].buf = (char *) &data->buffer;
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+
+	return (ret == 2) ? 0 : ret;
+}
+
+static int vz89x_smbus_xfer(struct vz89x_data *data, u8 cmd)
+{
+	struct i2c_client *client = data->client;
+	int ret;
+	int i;
+
+	ret = i2c_smbus_write_word_data(client, cmd, 0);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < data->chip->read_size; i++) {
+		ret = i2c_smbus_read_byte(client);
+		if (ret < 0)
+			return ret;
+		data->buffer[i] = ret;
+	}
+
+	return 0;
+}
+
+static int vz89x_get_measurement(struct vz89x_data *data)
+{
+	const struct vz89x_chip_data *chip = data->chip;
+	int ret;
+
+	/* sensor can only be polled once a second max per datasheet */
+	if (!time_after(jiffies, data->last_update + HZ))
+		return data->is_valid ? 0 : -EAGAIN;
+
+	data->is_valid = false;
+	data->last_update = jiffies;
+
+	ret = data->xfer(data, chip->cmd);
+	if (ret < 0)
+		return ret;
+
+	ret = chip->valid(data);
+	if (ret)
+		return -EAGAIN;
+
+	data->is_valid = true;
+
+	return 0;
+}
+
+static int vz89x_get_resistance_reading(struct vz89x_data *data,
+					struct iio_chan_spec const *chan,
+					int *val)
+{
+	u8 *tmp = &data->buffer[chan->address];
+
+	switch (chan->scan_type.endianness) {
+	case IIO_LE:
+		*val = le32_to_cpup((__le32 *) tmp) & GENMASK(23, 0);
+		break;
+	case IIO_BE:
+		*val = be32_to_cpup((__be32 *) tmp) >> 8;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int vz89x_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan, int *val,
+			  int *val2, long mask)
+{
+	struct vz89x_data *data = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&data->lock);
+		ret = vz89x_get_measurement(data);
+		mutex_unlock(&data->lock);
+
+		if (ret)
+			return ret;
+
+		switch (chan->type) {
+		case IIO_CONCENTRATION:
+			*val = data->buffer[chan->address];
+			return IIO_VAL_INT;
+		case IIO_RESISTANCE:
+			ret = vz89x_get_resistance_reading(data, chan, val);
+			if (!ret)
+				return IIO_VAL_INT;
+			break;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_RESISTANCE:
+			*val = 10;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+		switch (chan->channel2) {
+		case IIO_MOD_CO2:
+			*val = 44;
+			*val2 = 250000;
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_MOD_VOC:
+			*val = -13;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return ret;
+}
+
+static const struct iio_info vz89x_info = {
+	.attrs		= &vz89x_attrs_group,
+	.read_raw	= vz89x_read_raw,
+};
+
+static const struct vz89x_chip_data vz89x_chips[] = {
+	{
+		.valid = vz89x_measurement_is_valid,
+
+		.cmd = VZ89X_REG_MEASUREMENT,
+		.read_size = VZ89X_REG_MEASUREMENT_RD_SIZE,
+		.write_size = VZ89X_REG_MEASUREMENT_WR_SIZE,
+
+		.channels = vz89x_channels,
+		.num_channels = ARRAY_SIZE(vz89x_channels),
+	},
+	{
+		.valid = vz89te_measurement_is_valid,
+
+		.cmd = VZ89TE_REG_MEASUREMENT,
+		.read_size = VZ89TE_REG_MEASUREMENT_RD_SIZE,
+		.write_size = VZ89TE_REG_MEASUREMENT_WR_SIZE,
+
+		.channels = vz89te_channels,
+		.num_channels = ARRAY_SIZE(vz89te_channels),
+	},
+};
+
+static const struct of_device_id vz89x_dt_ids[] = {
+	{ .compatible = "sgx,vz89x", .data = (void *) VZ89X },
+	{ .compatible = "sgx,vz89te", .data = (void *) VZ89TE },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, vz89x_dt_ids);
+
+static int vz89x_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct vz89x_data *data;
+	int chip_id;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+	data = iio_priv(indio_dev);
+
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		data->xfer = vz89x_i2c_xfer;
+	else if (i2c_check_functionality(client->adapter,
+				I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
+		data->xfer = vz89x_smbus_xfer;
+	else
+		return -EOPNOTSUPP;
+
+	if (!dev_fwnode(dev))
+		chip_id = id->driver_data;
+	else
+		chip_id = (unsigned long)device_get_match_data(dev);
+
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	data->chip = &vz89x_chips[chip_id];
+	data->last_update = jiffies - HZ;
+	mutex_init(&data->lock);
+
+	indio_dev->info = &vz89x_info;
+	indio_dev->name = dev_name(dev);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	indio_dev->channels = data->chip->channels;
+	indio_dev->num_channels = data->chip->num_channels;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct i2c_device_id vz89x_id[] = {
+	{ "vz89x", VZ89X },
+	{ "vz89te", VZ89TE },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, vz89x_id);
+
+static struct i2c_driver vz89x_driver = {
+	.driver = {
+		.name	= "vz89x",
+		.of_match_table = vz89x_dt_ids,
+	},
+	.probe = vz89x_probe,
+	.id_table = vz89x_id,
+};
+module_i2c_driver(vz89x_driver);
+
+MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
+MODULE_DESCRIPTION("SGX Sensortech MiCS VZ89X VOC sensors");
+MODULE_LICENSE("GPL v2");