Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

28 files changed, 9060 insertions, 0 deletions

diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
new file mode 100644
index 000000000..97b86c4a5
--- /dev/null
+++ b/drivers/iio/gyro/Kconfig
@@ -0,0 +1,182 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# IIO Digital Gyroscope Sensor drivers configuration
+#
+# When adding new entries keep the list in alphabetical order
+
+menu "Digital gyroscope sensors"
+
+config ADIS16080
+	tristate "Analog Devices ADIS16080/100 Yaw Rate Gyroscope with SPI driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices ADIS16080, ADIS16100 Yaw
+	  Rate Gyroscope with SPI.
+
+config ADIS16130
+	tristate "Analog Devices ADIS16130 High Precision Angular Rate Sensor driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices ADIS16130 High Precision
+	  Angular Rate Sensor driver.
+
+config ADIS16136
+	tristate "Analog devices ADIS16136 and similar gyroscopes driver"
+	depends on SPI_MASTER
+	select IIO_ADIS_LIB
+	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+	help
+	  Say yes here to build support for the Analog Devices ADIS16133, ADIS16135,
+	  ADIS16136 gyroscope devices.
+
+config ADIS16260
+	tristate "Analog Devices ADIS16260 Digital Gyroscope Sensor SPI driver"
+	depends on SPI
+	select IIO_ADIS_LIB
+	select IIO_ADIS_LIB_BUFFER if IIO_BUFFER
+	help
+	  Say yes here to build support for Analog Devices ADIS16260 ADIS16265
+	  ADIS16250 ADIS16255 and ADIS16251 programmable digital gyroscope sensors.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called adis16260.
+
+config ADXRS290
+	tristate "Analog Devices ADXRS290 Dual-Axis MEMS Gyroscope SPI driver"
+	depends on SPI
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	help
+	  Say yes here to build support for Analog Devices ADXRS290 programmable
+	  digital output gyroscope.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called adxrs290.
+
+config ADXRS450
+	tristate "Analog Devices ADXRS450/3 Digital Output Gyroscope SPI driver"
+	depends on SPI
+	help
+	  Say yes here to build support for Analog Devices ADXRS450 and ADXRS453
+	  programmable digital output gyroscope.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called adxrs450.
+
+config BMG160
+	tristate "BOSCH BMG160 Gyro Sensor"
+	depends on (I2C || SPI_MASTER)
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select BMG160_I2C if (I2C)
+	select BMG160_SPI if (SPI)
+	help
+	  Say yes here to build support for BOSCH BMG160 Tri-axis Gyro Sensor
+	  driver connected via I2C or SPI. This driver also supports BMI055
+	  and BMI088 gyroscope.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called bmg160_i2c or bmg160_spi.
+
+config BMG160_I2C
+	tristate
+	select REGMAP_I2C
+
+config BMG160_SPI
+	tristate
+	select REGMAP_SPI
+
+config FXAS21002C
+	tristate "NXP FXAS21002C Gyro Sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select FXAS21002C_I2C if (I2C)
+	select FXAS21002C_SPI if (SPI)
+	depends on (I2C || SPI_MASTER)
+	help
+	  Say yes here to build support for NXP FXAS21002C Tri-axis Gyro
+	  Sensor driver connected via I2C or SPI.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called fxas21002c_i2c or fxas21002c_spi.
+
+config FXAS21002C_I2C
+	tristate
+	select REGMAP_I2C
+
+config FXAS21002C_SPI
+	tristate
+	select REGMAP_SPI
+
+config HID_SENSOR_GYRO_3D
+	depends on HID_SENSOR_HUB
+	select IIO_BUFFER
+	select HID_SENSOR_IIO_COMMON
+	select HID_SENSOR_IIO_TRIGGER
+	tristate "HID Gyroscope 3D"
+	help
+	  Say yes here to build support for the HID SENSOR
+	  Gyroscope 3D.
+
+config MPU3050
+	tristate
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP
+
+config MPU3050_I2C
+	tristate "Invensense MPU3050 devices on I2C"
+	depends on I2C
+	select MPU3050
+	select REGMAP_I2C
+	select I2C_MUX
+	help
+	  This driver supports the Invensense MPU3050 gyroscope over I2C.
+	  This driver can be built as a module. The module will be called
+	  inv-mpu3050-i2c.
+
+config IIO_ST_GYRO_3AXIS
+	tristate "STMicroelectronics gyroscopes 3-Axis Driver"
+	depends on (I2C || SPI_MASTER) && SYSFS
+	select IIO_ST_SENSORS_CORE
+	select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
+	help
+	  Say yes here to build support for STMicroelectronics gyroscopes:
+	  L3G4200D, LSM330DL, L3GD20, LSM330DLC, L3G4IS, LSM330, LSM9DS0.
+
+	  Also need to enable at least one of I2C and SPI interface drivers
+	  below.
+
+config IIO_ST_GYRO_I2C_3AXIS
+	tristate "STMicroelectronics gyroscopes 3-Axis I2C Interface"
+	depends on I2C && IIO_ST_GYRO_3AXIS
+	default I2C && IIO_ST_GYRO_3AXIS
+	select IIO_ST_SENSORS_I2C
+	help
+	  Build support for STMicroelectronics gyroscopes I2C interface.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called st_gyro_i2c.
+
+
+config IIO_ST_GYRO_SPI_3AXIS
+	tristate "STMicroelectronics gyroscopes 3-Axis SPI Interface"
+	depends on SPI_MASTER && IIO_ST_GYRO_3AXIS
+	default SPI_MASTER && IIO_ST_GYRO_3AXIS
+	select IIO_ST_SENSORS_SPI
+	help
+	  Build support for STMicroelectronics gyroscopes SPI interface.
+
+	  To compile this driver as a module, choose M here. The module
+	  will be called st_gyro_spi.
+
+
+config ITG3200
+	tristate "InvenSense ITG3200 Digital 3-Axis Gyroscope I2C driver"
+	depends on I2C
+	select IIO_TRIGGERED_BUFFER if IIO_BUFFER
+	help
+	  Say yes here to add support for the InvenSense ITG3200 digital
+	  3-axis gyroscope sensor.
+
+endmenu
diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
new file mode 100644
index 000000000..0319b397d
--- /dev/null
+++ b/drivers/iio/gyro/Makefile
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for industrial I/O gyroscope sensor drivers
+#
+
+# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_ADIS16080) += adis16080.o
+obj-$(CONFIG_ADIS16130) += adis16130.o
+obj-$(CONFIG_ADIS16136) += adis16136.o
+obj-$(CONFIG_ADIS16260) += adis16260.o
+obj-$(CONFIG_ADXRS290) += adxrs290.o
+obj-$(CONFIG_ADXRS450) += adxrs450.o
+obj-$(CONFIG_BMG160) += bmg160_core.o
+obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o
+obj-$(CONFIG_BMG160_SPI) += bmg160_spi.o
+obj-$(CONFIG_FXAS21002C) += fxas21002c_core.o
+obj-$(CONFIG_FXAS21002C_I2C) += fxas21002c_i2c.o
+obj-$(CONFIG_FXAS21002C_SPI) += fxas21002c_spi.o
+
+obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
+
+# Currently this is rolled into one module, split it if
+# we ever create a separate SPI interface for MPU-3050
+obj-$(CONFIG_MPU3050) += mpu3050.o
+mpu3050-objs := mpu3050-core.o mpu3050-i2c.o
+
+itg3200-y               := itg3200_core.o
+itg3200-$(CONFIG_IIO_BUFFER) += itg3200_buffer.o
+obj-$(CONFIG_ITG3200)   += itg3200.o
+
+obj-$(CONFIG_IIO_SSP_SENSORS_COMMONS) += ssp_gyro_sensor.o
+
+obj-$(CONFIG_IIO_ST_GYRO_3AXIS) += st_gyro.o
+st_gyro-y := st_gyro_core.o
+st_gyro-$(CONFIG_IIO_BUFFER) += st_gyro_buffer.o
+
+obj-$(CONFIG_IIO_ST_GYRO_I2C_3AXIS) += st_gyro_i2c.o
+obj-$(CONFIG_IIO_ST_GYRO_SPI_3AXIS) += st_gyro_spi.o
diff --git a/drivers/iio/gyro/adis16080.c b/drivers/iio/gyro/adis16080.c
new file mode 100644
index 000000000..14b3abf6d
--- /dev/null
+++ b/drivers/iio/gyro/adis16080.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ADIS16080/100 Yaw Rate Gyroscope with SPI driver
+ *
+ * Copyright 2010 Analog Devices Inc.
+ */
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define ADIS16080_DIN_GYRO   (0 << 10) /* Gyroscope output */
+#define ADIS16080_DIN_TEMP   (1 << 10) /* Temperature output */
+#define ADIS16080_DIN_AIN1   (2 << 10)
+#define ADIS16080_DIN_AIN2   (3 << 10)
+
+/*
+ * 1: Write contents on DIN to control register.
+ * 0: No changes to control register.
+ */
+
+#define ADIS16080_DIN_WRITE  (1 << 15)
+
+struct adis16080_chip_info {
+	int scale_val;
+	int scale_val2;
+};
+
+/**
+ * struct adis16080_state - device instance specific data
+ * @us:			actual spi_device to write data
+ * @info:		chip specific parameters
+ * @buf:		transmit or receive buffer
+ * @lock:		lock to protect buffer during reads
+ **/
+struct adis16080_state {
+	struct spi_device		*us;
+	const struct adis16080_chip_info *info;
+	struct mutex			lock;
+
+	__be16 buf __aligned(IIO_DMA_MINALIGN);
+};
+
+static int adis16080_read_sample(struct iio_dev *indio_dev,
+		u16 addr, int *val)
+{
+	struct adis16080_state *st = iio_priv(indio_dev);
+	int ret;
+	struct spi_transfer	t[] = {
+		{
+			.tx_buf		= &st->buf,
+			.len		= 2,
+			.cs_change	= 1,
+		}, {
+			.rx_buf		= &st->buf,
+			.len		= 2,
+		},
+	};
+
+	st->buf = cpu_to_be16(addr | ADIS16080_DIN_WRITE);
+
+	ret = spi_sync_transfer(st->us, t, ARRAY_SIZE(t));
+	if (ret == 0)
+		*val = sign_extend32(be16_to_cpu(st->buf), 11);
+
+	return ret;
+}
+
+static int adis16080_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val,
+			     int *val2,
+			     long mask)
+{
+	struct adis16080_state *st = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&st->lock);
+		ret = adis16080_read_sample(indio_dev, chan->address, val);
+		mutex_unlock(&st->lock);
+		return ret ? ret : IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = st->info->scale_val;
+			*val2 = st->info->scale_val2;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_VOLTAGE:
+			/* VREF = 5V, 12 bits */
+			*val = 5000;
+			*val2 = 12;
+			return IIO_VAL_FRACTIONAL_LOG2;
+		case IIO_TEMP:
+			/* 85 C = 585, 25 C = 0 */
+			*val = 85000 - 25000;
+			*val2 = 585;
+			return IIO_VAL_FRACTIONAL;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		switch (chan->type) {
+		case IIO_VOLTAGE:
+			/* 2.5 V = 0 */
+			*val = 2048;
+			return IIO_VAL_INT;
+		case IIO_TEMP:
+			/* 85 C = 585, 25 C = 0 */
+			*val = DIV_ROUND_CLOSEST(25 * 585, 85 - 25);
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_chan_spec adis16080_channels[] = {
+	{
+		.type = IIO_ANGL_VEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Z,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		.address = ADIS16080_DIN_GYRO,
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
+		.address = ADIS16080_DIN_AIN1,
+	}, {
+		.type = IIO_VOLTAGE,
+		.indexed = 1,
+		.channel = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
+		.address = ADIS16080_DIN_AIN2,
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
+		.address = ADIS16080_DIN_TEMP,
+	}
+};
+
+static const struct iio_info adis16080_info = {
+	.read_raw = &adis16080_read_raw,
+};
+
+enum {
+	ID_ADIS16080,
+	ID_ADIS16100,
+};
+
+static const struct adis16080_chip_info adis16080_chip_info[] = {
+	[ID_ADIS16080] = {
+		/* 80 degree = 819, 819 rad = 46925 degree */
+		.scale_val = 80,
+		.scale_val2 = 46925,
+	},
+	[ID_ADIS16100] = {
+		/* 300 degree = 1230, 1230 rad = 70474 degree */
+		.scale_val = 300,
+		.scale_val2 = 70474,
+	},
+};
+
+static int adis16080_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct adis16080_state *st;
+	struct iio_dev *indio_dev;
+
+	/* setup the industrialio driver allocated elements */
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+	st = iio_priv(indio_dev);
+
+	mutex_init(&st->lock);
+
+	/* Allocate the comms buffers */
+	st->us = spi;
+	st->info = &adis16080_chip_info[id->driver_data];
+
+	indio_dev->name = spi->dev.driver->name;
+	indio_dev->channels = adis16080_channels;
+	indio_dev->num_channels = ARRAY_SIZE(adis16080_channels);
+	indio_dev->info = &adis16080_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct spi_device_id adis16080_ids[] = {
+	{ "adis16080", ID_ADIS16080 },
+	{ "adis16100", ID_ADIS16100 },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, adis16080_ids);
+
+static struct spi_driver adis16080_driver = {
+	.driver = {
+		.name = "adis16080",
+	},
+	.probe = adis16080_probe,
+	.id_table = adis16080_ids,
+};
+module_spi_driver(adis16080_driver);
+
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_DESCRIPTION("Analog Devices ADIS16080/100 Yaw Rate Gyroscope Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/adis16130.c b/drivers/iio/gyro/adis16130.c
new file mode 100644
index 000000000..33cde9e6f
--- /dev/null
+++ b/drivers/iio/gyro/adis16130.c
@@ -0,0 +1,175 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ADIS16130 Digital Output, High Precision Angular Rate Sensor driver
+ *
+ * Copyright 2010 Analog Devices Inc.
+ */
+
+#include <linux/mutex.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+
+#include <asm/unaligned.h>
+
+#define ADIS16130_CON         0x0
+#define ADIS16130_CON_RD      (1 << 6)
+#define ADIS16130_IOP         0x1
+
+/* 1 = data-ready signal low when unread data on all channels; */
+#define ADIS16130_IOP_ALL_RDY (1 << 3)
+#define ADIS16130_IOP_SYNC    (1 << 0) /* 1 = synchronization enabled */
+#define ADIS16130_RATEDATA    0x8 /* Gyroscope output, rate of rotation */
+#define ADIS16130_TEMPDATA    0xA /* Temperature output */
+#define ADIS16130_RATECS      0x28 /* Gyroscope channel setup */
+#define ADIS16130_RATECS_EN   (1 << 3) /* 1 = channel enable; */
+#define ADIS16130_TEMPCS      0x2A /* Temperature channel setup */
+#define ADIS16130_TEMPCS_EN   (1 << 3)
+#define ADIS16130_RATECONV    0x30
+#define ADIS16130_TEMPCONV    0x32
+#define ADIS16130_MODE        0x38
+#define ADIS16130_MODE_24BIT  (1 << 1) /* 1 = 24-bit resolution; */
+
+/**
+ * struct adis16130_state - device instance specific data
+ * @us:			actual spi_device to write data
+ * @buf_lock:		mutex to protect tx and rx
+ * @buf:		unified tx/rx buffer
+ **/
+struct adis16130_state {
+	struct spi_device		*us;
+	struct mutex			buf_lock;
+	u8				buf[4] __aligned(IIO_DMA_MINALIGN);
+};
+
+static int adis16130_spi_read(struct iio_dev *indio_dev, u8 reg_addr, u32 *val)
+{
+	int ret;
+	struct adis16130_state *st = iio_priv(indio_dev);
+	struct spi_transfer xfer = {
+		.tx_buf = st->buf,
+		.rx_buf = st->buf,
+		.len = 4,
+	};
+
+	mutex_lock(&st->buf_lock);
+
+	st->buf[0] = ADIS16130_CON_RD | reg_addr;
+	st->buf[1] = st->buf[2] = st->buf[3] = 0;
+
+	ret = spi_sync_transfer(st->us, &xfer, 1);
+	if (ret == 0)
+		*val = get_unaligned_be24(&st->buf[1]);
+	mutex_unlock(&st->buf_lock);
+
+	return ret;
+}
+
+static int adis16130_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2,
+			      long mask)
+{
+	int ret;
+	u32 temp;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		/* Take the iio_dev status lock */
+		ret = adis16130_spi_read(indio_dev, chan->address, &temp);
+		if (ret)
+			return ret;
+		*val = temp;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			/* 0 degree = 838860, 250 degree = 14260608 */
+			*val = 250;
+			*val2 = 336440817; /* RAD_TO_DEGREE(14260608 - 8388608) */
+			return IIO_VAL_FRACTIONAL;
+		case IIO_TEMP:
+			/* 0C = 8036283, 105C = 9516048 */
+			*val = 105000;
+			*val2 = 9516048 - 8036283;
+			return IIO_VAL_FRACTIONAL;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = -8388608;
+			return IIO_VAL_INT;
+		case IIO_TEMP:
+			*val = -8036283;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_chan_spec adis16130_channels[] = {
+	{
+		.type = IIO_ANGL_VEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Z,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
+		.address = ADIS16130_RATEDATA,
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_OFFSET),
+		.address = ADIS16130_TEMPDATA,
+	}
+};
+
+static const struct iio_info adis16130_info = {
+	.read_raw = &adis16130_read_raw,
+};
+
+static int adis16130_probe(struct spi_device *spi)
+{
+	struct adis16130_state *st;
+	struct iio_dev *indio_dev;
+
+	/* setup the industrialio driver allocated elements */
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+	st = iio_priv(indio_dev);
+	/* this is only used for removal purposes */
+	spi_set_drvdata(spi, indio_dev);
+	st->us = spi;
+	mutex_init(&st->buf_lock);
+	indio_dev->name = spi->dev.driver->name;
+	indio_dev->channels = adis16130_channels;
+	indio_dev->num_channels = ARRAY_SIZE(adis16130_channels);
+	indio_dev->info = &adis16130_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static struct spi_driver adis16130_driver = {
+	.driver = {
+		.name = "adis16130",
+	},
+	.probe = adis16130_probe,
+};
+module_spi_driver(adis16130_driver);
+
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_DESCRIPTION("Analog Devices ADIS16130 High Precision Angular Rate");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("spi:adis16130");
diff --git a/drivers/iio/gyro/adis16136.c b/drivers/iio/gyro/adis16136.c
new file mode 100644
index 000000000..71295709f
--- /dev/null
+++ b/drivers/iio/gyro/adis16136.c
@@ -0,0 +1,594 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ADIS16133/ADIS16135/ADIS16136 gyroscope driver
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *   Author: Lars-Peter Clausen <lars@metafoo.de>
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/sysfs.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/imu/adis.h>
+
+#include <linux/debugfs.h>
+
+#define ADIS16136_REG_FLASH_CNT		0x00
+#define ADIS16136_REG_TEMP_OUT		0x02
+#define ADIS16136_REG_GYRO_OUT2		0x04
+#define ADIS16136_REG_GYRO_OUT		0x06
+#define ADIS16136_REG_GYRO_OFF2		0x08
+#define ADIS16136_REG_GYRO_OFF		0x0A
+#define ADIS16136_REG_ALM_MAG1		0x10
+#define ADIS16136_REG_ALM_MAG2		0x12
+#define ADIS16136_REG_ALM_SAMPL1	0x14
+#define ADIS16136_REG_ALM_SAMPL2	0x16
+#define ADIS16136_REG_ALM_CTRL		0x18
+#define ADIS16136_REG_GPIO_CTRL		0x1A
+#define ADIS16136_REG_MSC_CTRL		0x1C
+#define ADIS16136_REG_SMPL_PRD		0x1E
+#define ADIS16136_REG_AVG_CNT		0x20
+#define ADIS16136_REG_DEC_RATE		0x22
+#define ADIS16136_REG_SLP_CTRL		0x24
+#define ADIS16136_REG_DIAG_STAT		0x26
+#define ADIS16136_REG_GLOB_CMD		0x28
+#define ADIS16136_REG_LOT1		0x32
+#define ADIS16136_REG_LOT2		0x34
+#define ADIS16136_REG_LOT3		0x36
+#define ADIS16136_REG_PROD_ID		0x38
+#define ADIS16136_REG_SERIAL_NUM	0x3A
+
+#define ADIS16136_DIAG_STAT_FLASH_UPDATE_FAIL	2
+#define ADIS16136_DIAG_STAT_SPI_FAIL		3
+#define ADIS16136_DIAG_STAT_SELF_TEST_FAIL	5
+#define ADIS16136_DIAG_STAT_FLASH_CHKSUM_FAIL	6
+
+#define ADIS16136_MSC_CTRL_MEMORY_TEST BIT(11)
+#define ADIS16136_MSC_CTRL_SELF_TEST BIT(10)
+
+struct adis16136_chip_info {
+	unsigned int precision;
+	unsigned int fullscale;
+	const struct adis_data adis_data;
+};
+
+struct adis16136 {
+	const struct adis16136_chip_info *chip_info;
+
+	struct adis adis;
+};
+
+#ifdef CONFIG_DEBUG_FS
+
+static ssize_t adis16136_show_serial(struct file *file,
+		char __user *userbuf, size_t count, loff_t *ppos)
+{
+	struct adis16136 *adis16136 = file->private_data;
+	uint16_t lot1, lot2, lot3, serial;
+	char buf[20];
+	size_t len;
+	int ret;
+
+	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_SERIAL_NUM,
+		&serial);
+	if (ret)
+		return ret;
+
+	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_LOT1, &lot1);
+	if (ret)
+		return ret;
+
+	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_LOT2, &lot2);
+	if (ret)
+		return ret;
+
+	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_LOT3, &lot3);
+	if (ret)
+		return ret;
+
+	len = snprintf(buf, sizeof(buf), "%.4x%.4x%.4x-%.4x\n", lot1, lot2,
+		lot3, serial);
+
+	return simple_read_from_buffer(userbuf, count, ppos, buf, len);
+}
+
+static const struct file_operations adis16136_serial_fops = {
+	.open = simple_open,
+	.read = adis16136_show_serial,
+	.llseek = default_llseek,
+	.owner = THIS_MODULE,
+};
+
+static int adis16136_show_product_id(void *arg, u64 *val)
+{
+	struct adis16136 *adis16136 = arg;
+	u16 prod_id;
+	int ret;
+
+	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_PROD_ID,
+		&prod_id);
+	if (ret)
+		return ret;
+
+	*val = prod_id;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16136_product_id_fops,
+	adis16136_show_product_id, NULL, "%llu\n");
+
+static int adis16136_show_flash_count(void *arg, u64 *val)
+{
+	struct adis16136 *adis16136 = arg;
+	uint16_t flash_count;
+	int ret;
+
+	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_FLASH_CNT,
+		&flash_count);
+	if (ret)
+		return ret;
+
+	*val = flash_count;
+
+	return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(adis16136_flash_count_fops,
+	adis16136_show_flash_count, NULL, "%lld\n");
+
+static int adis16136_debugfs_init(struct iio_dev *indio_dev)
+{
+	struct adis16136 *adis16136 = iio_priv(indio_dev);
+	struct dentry *d = iio_get_debugfs_dentry(indio_dev);
+
+	debugfs_create_file_unsafe("serial_number", 0400,
+		d, adis16136, &adis16136_serial_fops);
+	debugfs_create_file_unsafe("product_id", 0400,
+		d, adis16136, &adis16136_product_id_fops);
+	debugfs_create_file_unsafe("flash_count", 0400,
+		d, adis16136, &adis16136_flash_count_fops);
+
+	return 0;
+}
+
+#else
+
+static int adis16136_debugfs_init(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+
+#endif
+
+static int adis16136_set_freq(struct adis16136 *adis16136, unsigned int freq)
+{
+	unsigned int t;
+
+	t = 32768 / freq;
+	if (t < 0xf)
+		t = 0xf;
+	else if (t > 0xffff)
+		t = 0xffff;
+	else
+		t--;
+
+	return adis_write_reg_16(&adis16136->adis, ADIS16136_REG_SMPL_PRD, t);
+}
+
+static int __adis16136_get_freq(struct adis16136 *adis16136, unsigned int *freq)
+{
+	uint16_t t;
+	int ret;
+
+	ret = __adis_read_reg_16(&adis16136->adis, ADIS16136_REG_SMPL_PRD, &t);
+	if (ret)
+		return ret;
+
+	*freq = 32768 / (t + 1);
+
+	return 0;
+}
+
+static ssize_t adis16136_write_frequency(struct device *dev,
+	struct device_attribute *attr, const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct adis16136 *adis16136 = iio_priv(indio_dev);
+	unsigned int val;
+	int ret;
+
+	ret = kstrtouint(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	if (val == 0)
+		return -EINVAL;
+
+	ret = adis16136_set_freq(adis16136, val);
+
+	return ret ? ret : len;
+}
+
+static ssize_t adis16136_read_frequency(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct adis16136 *adis16136 = iio_priv(indio_dev);
+	unsigned int freq;
+	int ret;
+
+	adis_dev_lock(&adis16136->adis);
+	ret = __adis16136_get_freq(adis16136, &freq);
+	adis_dev_unlock(&adis16136->adis);
+	if (ret)
+		return ret;
+
+	return sprintf(buf, "%d\n", freq);
+}
+
+static IIO_DEV_ATTR_SAMP_FREQ(S_IWUSR | S_IRUGO,
+				  adis16136_read_frequency,
+				  adis16136_write_frequency);
+
+static const unsigned adis16136_3db_divisors[] = {
+	[0] = 2, /* Special case */
+	[1] = 6,
+	[2] = 12,
+	[3] = 25,
+	[4] = 50,
+	[5] = 100,
+	[6] = 200,
+	[7] = 200, /* Not a valid setting */
+};
+
+static int adis16136_set_filter(struct iio_dev *indio_dev, int val)
+{
+	struct adis16136 *adis16136 = iio_priv(indio_dev);
+	unsigned int freq;
+	int i, ret;
+
+	adis_dev_lock(&adis16136->adis);
+	ret = __adis16136_get_freq(adis16136, &freq);
+	if (ret)
+		goto out_unlock;
+
+	for (i = ARRAY_SIZE(adis16136_3db_divisors) - 1; i >= 1; i--) {
+		if (freq / adis16136_3db_divisors[i] >= val)
+			break;
+	}
+
+	ret = __adis_write_reg_16(&adis16136->adis, ADIS16136_REG_AVG_CNT, i);
+out_unlock:
+	adis_dev_unlock(&adis16136->adis);
+
+	return ret;
+}
+
+static int adis16136_get_filter(struct iio_dev *indio_dev, int *val)
+{
+	struct adis16136 *adis16136 = iio_priv(indio_dev);
+	unsigned int freq;
+	uint16_t val16;
+	int ret;
+
+	adis_dev_lock(&adis16136->adis);
+
+	ret = __adis_read_reg_16(&adis16136->adis, ADIS16136_REG_AVG_CNT,
+				 &val16);
+	if (ret)
+		goto err_unlock;
+
+	ret = __adis16136_get_freq(adis16136, &freq);
+	if (ret)
+		goto err_unlock;
+
+	*val = freq / adis16136_3db_divisors[val16 & 0x07];
+
+err_unlock:
+	adis_dev_unlock(&adis16136->adis);
+
+	return ret ? ret : IIO_VAL_INT;
+}
+
+static int adis16136_read_raw(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int *val, int *val2, long info)
+{
+	struct adis16136 *adis16136 = iio_priv(indio_dev);
+	uint32_t val32;
+	int ret;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		return adis_single_conversion(indio_dev, chan, 0, val);
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = adis16136->chip_info->precision;
+			*val2 = (adis16136->chip_info->fullscale << 16);
+			return IIO_VAL_FRACTIONAL;
+		case IIO_TEMP:
+			*val = 10;
+			*val2 = 697000; /* 0.010697 degree Celsius */
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_CALIBBIAS:
+		ret = adis_read_reg_32(&adis16136->adis,
+			ADIS16136_REG_GYRO_OFF2, &val32);
+		if (ret)
+			return ret;
+
+		*val = sign_extend32(val32, 31);
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		return adis16136_get_filter(indio_dev, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int adis16136_write_raw(struct iio_dev *indio_dev,
+	const struct iio_chan_spec *chan, int val, int val2, long info)
+{
+	struct adis16136 *adis16136 = iio_priv(indio_dev);
+
+	switch (info) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		return adis_write_reg_32(&adis16136->adis,
+			ADIS16136_REG_GYRO_OFF2, val);
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		return adis16136_set_filter(indio_dev, val);
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+enum {
+	ADIS16136_SCAN_GYRO,
+	ADIS16136_SCAN_TEMP,
+};
+
+static const struct iio_chan_spec adis16136_channels[] = {
+	{
+		.type = IIO_ANGL_VEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_CALIBBIAS) |
+			BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+
+		.address = ADIS16136_REG_GYRO_OUT2,
+		.scan_index = ADIS16136_SCAN_GYRO,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 32,
+			.storagebits = 32,
+			.endianness = IIO_BE,
+		},
+	}, {
+		.type = IIO_TEMP,
+		.indexed = 1,
+		.channel = 0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		.address = ADIS16136_REG_TEMP_OUT,
+		.scan_index = ADIS16136_SCAN_TEMP,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(2),
+};
+
+static struct attribute *adis16136_attributes[] = {
+	&iio_dev_attr_sampling_frequency.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group adis16136_attribute_group = {
+	.attrs = adis16136_attributes,
+};
+
+static const struct iio_info adis16136_info = {
+	.attrs = &adis16136_attribute_group,
+	.read_raw = &adis16136_read_raw,
+	.write_raw = &adis16136_write_raw,
+	.update_scan_mode = adis_update_scan_mode,
+	.debugfs_reg_access = adis_debugfs_reg_access,
+};
+
+static int adis16136_stop_device(struct iio_dev *indio_dev)
+{
+	struct adis16136 *adis16136 = iio_priv(indio_dev);
+	int ret;
+
+	ret = adis_write_reg_16(&adis16136->adis, ADIS16136_REG_SLP_CTRL, 0xff);
+	if (ret)
+		dev_err(&indio_dev->dev,
+			"Could not power down device: %d\n", ret);
+
+	return ret;
+}
+
+static int adis16136_initial_setup(struct iio_dev *indio_dev)
+{
+	struct adis16136 *adis16136 = iio_priv(indio_dev);
+	unsigned int device_id;
+	uint16_t prod_id;
+	int ret;
+
+	ret = adis_initial_startup(&adis16136->adis);
+	if (ret)
+		return ret;
+
+	ret = adis_read_reg_16(&adis16136->adis, ADIS16136_REG_PROD_ID,
+		&prod_id);
+	if (ret)
+		return ret;
+
+	ret = sscanf(indio_dev->name, "adis%u\n", &device_id);
+	if (ret != 1)
+		return -EINVAL;
+
+	if (prod_id != device_id)
+		dev_warn(&indio_dev->dev, "Device ID(%u) and product ID(%u) do not match.",
+				device_id, prod_id);
+
+	return 0;
+}
+
+static const char * const adis16136_status_error_msgs[] = {
+	[ADIS16136_DIAG_STAT_FLASH_UPDATE_FAIL] = "Flash update failed",
+	[ADIS16136_DIAG_STAT_SPI_FAIL] = "SPI failure",
+	[ADIS16136_DIAG_STAT_SELF_TEST_FAIL] = "Self test error",
+	[ADIS16136_DIAG_STAT_FLASH_CHKSUM_FAIL] = "Flash checksum error",
+};
+
+#define ADIS16136_DATA(_timeouts)					\
+{									\
+	.diag_stat_reg = ADIS16136_REG_DIAG_STAT,			\
+	.glob_cmd_reg = ADIS16136_REG_GLOB_CMD,				\
+	.msc_ctrl_reg = ADIS16136_REG_MSC_CTRL,				\
+	.self_test_reg = ADIS16136_REG_MSC_CTRL,			\
+	.self_test_mask = ADIS16136_MSC_CTRL_SELF_TEST,			\
+	.read_delay = 10,						\
+	.write_delay = 10,						\
+	.status_error_msgs = adis16136_status_error_msgs,		\
+	.status_error_mask = BIT(ADIS16136_DIAG_STAT_FLASH_UPDATE_FAIL) |	\
+		BIT(ADIS16136_DIAG_STAT_SPI_FAIL) |			\
+		BIT(ADIS16136_DIAG_STAT_SELF_TEST_FAIL) |		\
+		BIT(ADIS16136_DIAG_STAT_FLASH_CHKSUM_FAIL),		\
+	.timeouts = (_timeouts),					\
+}
+
+enum adis16136_id {
+	ID_ADIS16133,
+	ID_ADIS16135,
+	ID_ADIS16136,
+	ID_ADIS16137,
+};
+
+static const struct adis_timeout adis16133_timeouts = {
+	.reset_ms = 75,
+	.sw_reset_ms = 75,
+	.self_test_ms = 50,
+};
+
+static const struct adis_timeout adis16136_timeouts = {
+	.reset_ms = 128,
+	.sw_reset_ms = 75,
+	.self_test_ms = 245,
+};
+
+static const struct adis16136_chip_info adis16136_chip_info[] = {
+	[ID_ADIS16133] = {
+		.precision = IIO_DEGREE_TO_RAD(1200),
+		.fullscale = 24000,
+		.adis_data = ADIS16136_DATA(&adis16133_timeouts),
+	},
+	[ID_ADIS16135] = {
+		.precision = IIO_DEGREE_TO_RAD(300),
+		.fullscale = 24000,
+		.adis_data = ADIS16136_DATA(&adis16133_timeouts),
+	},
+	[ID_ADIS16136] = {
+		.precision = IIO_DEGREE_TO_RAD(450),
+		.fullscale = 24623,
+		.adis_data = ADIS16136_DATA(&adis16136_timeouts),
+	},
+	[ID_ADIS16137] = {
+		.precision = IIO_DEGREE_TO_RAD(1000),
+		.fullscale = 24609,
+		.adis_data = ADIS16136_DATA(&adis16136_timeouts),
+	},
+};
+
+static void adis16136_stop(void *data)
+{
+	adis16136_stop_device(data);
+}
+
+static int adis16136_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct adis16136 *adis16136;
+	struct iio_dev *indio_dev;
+	const struct adis_data *adis16136_data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adis16136));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, indio_dev);
+
+	adis16136 = iio_priv(indio_dev);
+
+	adis16136->chip_info = &adis16136_chip_info[id->driver_data];
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->channels = adis16136_channels;
+	indio_dev->num_channels = ARRAY_SIZE(adis16136_channels);
+	indio_dev->info = &adis16136_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	adis16136_data = &adis16136->chip_info->adis_data;
+
+	ret = adis_init(&adis16136->adis, indio_dev, spi, adis16136_data);
+	if (ret)
+		return ret;
+
+	ret = devm_adis_setup_buffer_and_trigger(&adis16136->adis, indio_dev, NULL);
+	if (ret)
+		return ret;
+
+	ret = adis16136_initial_setup(indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(&spi->dev, adis16136_stop, indio_dev);
+	if (ret)
+		return ret;
+
+	ret = devm_iio_device_register(&spi->dev, indio_dev);
+	if (ret)
+		return ret;
+
+	adis16136_debugfs_init(indio_dev);
+
+	return 0;
+}
+
+static const struct spi_device_id adis16136_ids[] = {
+	{ "adis16133", ID_ADIS16133 },
+	{ "adis16135", ID_ADIS16135 },
+	{ "adis16136", ID_ADIS16136 },
+	{ "adis16137", ID_ADIS16137 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, adis16136_ids);
+
+static struct spi_driver adis16136_driver = {
+	.driver = {
+		.name = "adis16136",
+	},
+	.id_table = adis16136_ids,
+	.probe = adis16136_probe,
+};
+module_spi_driver(adis16136_driver);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Analog Devices ADIS16133/ADIS16135/ADIS16136 gyroscope driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/gyro/adis16260.c b/drivers/iio/gyro/adis16260.c
new file mode 100644
index 000000000..eaf57bd33
--- /dev/null
+++ b/drivers/iio/gyro/adis16260.c
@@ -0,0 +1,436 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ADIS16260/ADIS16265 Programmable Digital Gyroscope Sensor Driver
+ *
+ * Copyright 2010 Analog Devices Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/imu/adis.h>
+
+#define ADIS16260_STARTUP_DELAY	220 /* ms */
+
+#define ADIS16260_FLASH_CNT  0x00 /* Flash memory write count */
+#define ADIS16260_SUPPLY_OUT 0x02 /* Power supply measurement */
+#define ADIS16260_GYRO_OUT   0x04 /* X-axis gyroscope output */
+#define ADIS16260_AUX_ADC    0x0A /* analog input channel measurement */
+#define ADIS16260_TEMP_OUT   0x0C /* internal temperature measurement */
+#define ADIS16260_ANGL_OUT   0x0E /* angle displacement */
+#define ADIS16260_GYRO_OFF   0x14 /* Calibration, offset/bias adjustment */
+#define ADIS16260_GYRO_SCALE 0x16 /* Calibration, scale adjustment */
+#define ADIS16260_ALM_MAG1   0x20 /* Alarm 1 magnitude/polarity setting */
+#define ADIS16260_ALM_MAG2   0x22 /* Alarm 2 magnitude/polarity setting */
+#define ADIS16260_ALM_SMPL1  0x24 /* Alarm 1 dynamic rate of change setting */
+#define ADIS16260_ALM_SMPL2  0x26 /* Alarm 2 dynamic rate of change setting */
+#define ADIS16260_ALM_CTRL   0x28 /* Alarm control */
+#define ADIS16260_AUX_DAC    0x30 /* Auxiliary DAC data */
+#define ADIS16260_GPIO_CTRL  0x32 /* Control, digital I/O line */
+#define ADIS16260_MSC_CTRL   0x34 /* Control, data ready, self-test settings */
+#define ADIS16260_SMPL_PRD   0x36 /* Control, internal sample rate */
+#define ADIS16260_SENS_AVG   0x38 /* Control, dynamic range, filtering */
+#define ADIS16260_SLP_CNT    0x3A /* Control, sleep mode initiation */
+#define ADIS16260_DIAG_STAT  0x3C /* Diagnostic, error flags */
+#define ADIS16260_GLOB_CMD   0x3E /* Control, global commands */
+#define ADIS16260_LOT_ID1    0x52 /* Lot Identification Code 1 */
+#define ADIS16260_LOT_ID2    0x54 /* Lot Identification Code 2 */
+#define ADIS16260_PROD_ID    0x56 /* Product identifier;
+				   * convert to decimal = 16,265/16,260 */
+#define ADIS16260_SERIAL_NUM 0x58 /* Serial number */
+
+#define ADIS16260_ERROR_ACTIVE			(1<<14)
+#define ADIS16260_NEW_DATA			(1<<15)
+
+/* MSC_CTRL */
+#define ADIS16260_MSC_CTRL_MEM_TEST		(1<<11)
+/* Internal self-test enable */
+#define ADIS16260_MSC_CTRL_INT_SELF_TEST	(1<<10)
+#define ADIS16260_MSC_CTRL_NEG_SELF_TEST	(1<<9)
+#define ADIS16260_MSC_CTRL_POS_SELF_TEST	(1<<8)
+#define ADIS16260_MSC_CTRL_DATA_RDY_EN		(1<<2)
+#define ADIS16260_MSC_CTRL_DATA_RDY_POL_HIGH	(1<<1)
+#define ADIS16260_MSC_CTRL_DATA_RDY_DIO2	(1<<0)
+
+/* SMPL_PRD */
+/* Time base (tB): 0 = 1.953 ms, 1 = 60.54 ms */
+#define ADIS16260_SMPL_PRD_TIME_BASE	(1<<7)
+#define ADIS16260_SMPL_PRD_DIV_MASK	0x7F
+
+/* SLP_CNT */
+#define ADIS16260_SLP_CNT_POWER_OFF     0x80
+
+/* DIAG_STAT */
+#define ADIS16260_DIAG_STAT_ALARM2	(1<<9)
+#define ADIS16260_DIAG_STAT_ALARM1	(1<<8)
+#define ADIS16260_DIAG_STAT_FLASH_CHK_BIT	6
+#define ADIS16260_DIAG_STAT_SELF_TEST_BIT	5
+#define ADIS16260_DIAG_STAT_OVERFLOW_BIT	4
+#define ADIS16260_DIAG_STAT_SPI_FAIL_BIT	3
+#define ADIS16260_DIAG_STAT_FLASH_UPT_BIT	2
+#define ADIS16260_DIAG_STAT_POWER_HIGH_BIT	1
+#define ADIS16260_DIAG_STAT_POWER_LOW_BIT	0
+
+/* GLOB_CMD */
+#define ADIS16260_GLOB_CMD_SW_RESET	(1<<7)
+#define ADIS16260_GLOB_CMD_FLASH_UPD	(1<<3)
+#define ADIS16260_GLOB_CMD_DAC_LATCH	(1<<2)
+#define ADIS16260_GLOB_CMD_FAC_CALIB	(1<<1)
+#define ADIS16260_GLOB_CMD_AUTO_NULL	(1<<0)
+
+#define ADIS16260_SPI_SLOW	(u32)(300 * 1000)
+#define ADIS16260_SPI_BURST	(u32)(1000 * 1000)
+#define ADIS16260_SPI_FAST	(u32)(2000 * 1000)
+
+/* At the moment triggers are only used for ring buffer
+ * filling. This may change!
+ */
+
+#define ADIS16260_SCAN_GYRO	0
+#define ADIS16260_SCAN_SUPPLY	1
+#define ADIS16260_SCAN_AUX_ADC	2
+#define ADIS16260_SCAN_TEMP	3
+#define ADIS16260_SCAN_ANGL	4
+
+struct adis16260_chip_info {
+	unsigned int gyro_max_val;
+	unsigned int gyro_max_scale;
+	const struct iio_chan_spec *channels;
+	unsigned int num_channels;
+};
+
+struct adis16260 {
+	const struct adis16260_chip_info *info;
+
+	struct adis adis;
+};
+
+enum adis16260_type {
+	ADIS16251,
+	ADIS16260,
+	ADIS16266,
+};
+
+static const struct iio_chan_spec adis16260_channels[] = {
+	ADIS_GYRO_CHAN(X, ADIS16260_GYRO_OUT, ADIS16260_SCAN_GYRO,
+		BIT(IIO_CHAN_INFO_CALIBBIAS) |
+		BIT(IIO_CHAN_INFO_CALIBSCALE),
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 14),
+	ADIS_INCLI_CHAN(X, ADIS16260_ANGL_OUT, ADIS16260_SCAN_ANGL, 0,
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 14),
+	ADIS_TEMP_CHAN(ADIS16260_TEMP_OUT, ADIS16260_SCAN_TEMP,
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
+	ADIS_SUPPLY_CHAN(ADIS16260_SUPPLY_OUT, ADIS16260_SCAN_SUPPLY,
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
+	ADIS_AUX_ADC_CHAN(ADIS16260_AUX_ADC, ADIS16260_SCAN_AUX_ADC,
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
+	IIO_CHAN_SOFT_TIMESTAMP(5),
+};
+
+static const struct iio_chan_spec adis16266_channels[] = {
+	ADIS_GYRO_CHAN(X, ADIS16260_GYRO_OUT, ADIS16260_SCAN_GYRO,
+		BIT(IIO_CHAN_INFO_CALIBBIAS) |
+		BIT(IIO_CHAN_INFO_CALIBSCALE),
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 14),
+	ADIS_TEMP_CHAN(ADIS16260_TEMP_OUT, ADIS16260_SCAN_TEMP,
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
+	ADIS_SUPPLY_CHAN(ADIS16260_SUPPLY_OUT, ADIS16260_SCAN_SUPPLY,
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
+	ADIS_AUX_ADC_CHAN(ADIS16260_AUX_ADC, ADIS16260_SCAN_AUX_ADC,
+		BIT(IIO_CHAN_INFO_SAMP_FREQ), 12),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static const struct adis16260_chip_info adis16260_chip_info_table[] = {
+	[ADIS16251] = {
+		.gyro_max_scale = 80,
+		.gyro_max_val = IIO_RAD_TO_DEGREE(4368),
+		.channels = adis16260_channels,
+		.num_channels = ARRAY_SIZE(adis16260_channels),
+	},
+	[ADIS16260] = {
+		.gyro_max_scale = 320,
+		.gyro_max_val = IIO_RAD_TO_DEGREE(4368),
+		.channels = adis16260_channels,
+		.num_channels = ARRAY_SIZE(adis16260_channels),
+	},
+	[ADIS16266] = {
+		.gyro_max_scale = 14000,
+		.gyro_max_val = IIO_RAD_TO_DEGREE(3357),
+		.channels = adis16266_channels,
+		.num_channels = ARRAY_SIZE(adis16266_channels),
+	},
+};
+
+/* Power down the device */
+static int adis16260_stop_device(struct iio_dev *indio_dev)
+{
+	struct adis16260 *adis16260 = iio_priv(indio_dev);
+	int ret;
+	u16 val = ADIS16260_SLP_CNT_POWER_OFF;
+
+	ret = adis_write_reg_16(&adis16260->adis, ADIS16260_SLP_CNT, val);
+	if (ret)
+		dev_err(&indio_dev->dev, "problem with turning device off: SLP_CNT");
+
+	return ret;
+}
+
+static const u8 adis16260_addresses[][2] = {
+	[ADIS16260_SCAN_GYRO] = { ADIS16260_GYRO_OFF, ADIS16260_GYRO_SCALE },
+};
+
+static int adis16260_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2,
+			      long mask)
+{
+	struct adis16260 *adis16260 = iio_priv(indio_dev);
+	const struct adis16260_chip_info *info = adis16260->info;
+	struct adis *adis = &adis16260->adis;
+	int ret;
+	u8 addr;
+	s16 val16;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		return adis_single_conversion(indio_dev, chan,
+				ADIS16260_ERROR_ACTIVE, val);
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = info->gyro_max_scale;
+			*val2 = info->gyro_max_val;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_INCLI:
+			*val = 0;
+			*val2 = IIO_DEGREE_TO_RAD(36630);
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_VOLTAGE:
+			if (chan->channel == 0) {
+				*val = 1;
+				*val2 = 831500; /* 1.8315 mV */
+			} else {
+				*val = 0;
+				*val2 = 610500; /* 610.5 uV */
+			}
+			return IIO_VAL_INT_PLUS_MICRO;
+		case IIO_TEMP:
+			*val = 145;
+			*val2 = 300000; /* 0.1453 C */
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		*val = 250000 / 1453; /* 25 C = 0x00 */
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		addr = adis16260_addresses[chan->scan_index][0];
+		ret = adis_read_reg_16(adis, addr, &val16);
+		if (ret)
+			return ret;
+
+		*val = sign_extend32(val16, 11);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_CALIBSCALE:
+		addr = adis16260_addresses[chan->scan_index][1];
+		ret = adis_read_reg_16(adis, addr, &val16);
+		if (ret)
+			return ret;
+
+		*val = val16;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = adis_read_reg_16(adis, ADIS16260_SMPL_PRD, &val16);
+		if (ret)
+			return ret;
+
+		if (spi_get_device_id(adis->spi)->driver_data)
+		/* If an adis16251 */
+			*val = (val16 & ADIS16260_SMPL_PRD_TIME_BASE) ?
+				8 : 256;
+		else
+			*val = (val16 & ADIS16260_SMPL_PRD_TIME_BASE) ?
+				66 : 2048;
+		*val /= (val16 & ADIS16260_SMPL_PRD_DIV_MASK) + 1;
+		return IIO_VAL_INT;
+	}
+	return -EINVAL;
+}
+
+static int adis16260_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct adis16260 *adis16260 = iio_priv(indio_dev);
+	struct adis *adis = &adis16260->adis;
+	int ret;
+	u8 addr;
+	u8 t;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (val < -2048 || val >= 2048)
+			return -EINVAL;
+
+		addr = adis16260_addresses[chan->scan_index][0];
+		return adis_write_reg_16(adis, addr, val);
+	case IIO_CHAN_INFO_CALIBSCALE:
+		if (val < 0 || val >= 4096)
+			return -EINVAL;
+
+		addr = adis16260_addresses[chan->scan_index][1];
+		return adis_write_reg_16(adis, addr, val);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		adis_dev_lock(adis);
+		if (spi_get_device_id(adis->spi)->driver_data)
+			t = 256 / val;
+		else
+			t = 2048 / val;
+
+		if (t > ADIS16260_SMPL_PRD_DIV_MASK)
+			t = ADIS16260_SMPL_PRD_DIV_MASK;
+		else if (t > 0)
+			t--;
+
+		if (t >= 0x0A)
+			adis->spi->max_speed_hz = ADIS16260_SPI_SLOW;
+		else
+			adis->spi->max_speed_hz = ADIS16260_SPI_FAST;
+		ret = __adis_write_reg_8(adis, ADIS16260_SMPL_PRD, t);
+
+		adis_dev_unlock(adis);
+		return ret;
+	}
+	return -EINVAL;
+}
+
+static const struct iio_info adis16260_info = {
+	.read_raw = &adis16260_read_raw,
+	.write_raw = &adis16260_write_raw,
+	.update_scan_mode = adis_update_scan_mode,
+};
+
+static const char * const adis1620_status_error_msgs[] = {
+	[ADIS16260_DIAG_STAT_FLASH_CHK_BIT] = "Flash checksum error",
+	[ADIS16260_DIAG_STAT_SELF_TEST_BIT] = "Self test error",
+	[ADIS16260_DIAG_STAT_OVERFLOW_BIT] = "Sensor overrange",
+	[ADIS16260_DIAG_STAT_SPI_FAIL_BIT] = "SPI failure",
+	[ADIS16260_DIAG_STAT_FLASH_UPT_BIT] = "Flash update failed",
+	[ADIS16260_DIAG_STAT_POWER_HIGH_BIT] = "Power supply above 5.25",
+	[ADIS16260_DIAG_STAT_POWER_LOW_BIT] = "Power supply below 4.75",
+};
+
+static const struct adis_timeout adis16260_timeouts = {
+	.reset_ms = ADIS16260_STARTUP_DELAY,
+	.sw_reset_ms = ADIS16260_STARTUP_DELAY,
+	.self_test_ms = ADIS16260_STARTUP_DELAY,
+};
+
+static const struct adis_data adis16260_data = {
+	.write_delay = 30,
+	.read_delay = 30,
+	.msc_ctrl_reg = ADIS16260_MSC_CTRL,
+	.glob_cmd_reg = ADIS16260_GLOB_CMD,
+	.diag_stat_reg = ADIS16260_DIAG_STAT,
+
+	.self_test_mask = ADIS16260_MSC_CTRL_MEM_TEST,
+	.self_test_reg = ADIS16260_MSC_CTRL,
+	.timeouts = &adis16260_timeouts,
+
+	.status_error_msgs = adis1620_status_error_msgs,
+	.status_error_mask = BIT(ADIS16260_DIAG_STAT_FLASH_CHK_BIT) |
+		BIT(ADIS16260_DIAG_STAT_SELF_TEST_BIT) |
+		BIT(ADIS16260_DIAG_STAT_OVERFLOW_BIT) |
+		BIT(ADIS16260_DIAG_STAT_SPI_FAIL_BIT) |
+		BIT(ADIS16260_DIAG_STAT_FLASH_UPT_BIT) |
+		BIT(ADIS16260_DIAG_STAT_POWER_HIGH_BIT) |
+		BIT(ADIS16260_DIAG_STAT_POWER_LOW_BIT),
+};
+
+static void adis16260_stop(void *data)
+{
+	adis16260_stop_device(data);
+}
+
+static int adis16260_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id;
+	struct adis16260 *adis16260;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	id = spi_get_device_id(spi);
+	if (!id)
+		return -ENODEV;
+
+	/* setup the industrialio driver allocated elements */
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adis16260));
+	if (!indio_dev)
+		return -ENOMEM;
+	adis16260 = iio_priv(indio_dev);
+	/* this is only used for removal purposes */
+	spi_set_drvdata(spi, indio_dev);
+
+	adis16260->info = &adis16260_chip_info_table[id->driver_data];
+
+	indio_dev->name = id->name;
+	indio_dev->info = &adis16260_info;
+	indio_dev->channels = adis16260->info->channels;
+	indio_dev->num_channels = adis16260->info->num_channels;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = adis_init(&adis16260->adis, indio_dev, spi, &adis16260_data);
+	if (ret)
+		return ret;
+
+	ret = devm_adis_setup_buffer_and_trigger(&adis16260->adis, indio_dev, NULL);
+	if (ret)
+		return ret;
+
+	/* Get the device into a sane initial state */
+	ret = adis_initial_startup(&adis16260->adis);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(&spi->dev, adis16260_stop, indio_dev);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+/*
+ * These parts do not need to be differentiated until someone adds
+ * support for the on chip filtering.
+ */
+static const struct spi_device_id adis16260_id[] = {
+	{"adis16260", ADIS16260},
+	{"adis16265", ADIS16260},
+	{"adis16266", ADIS16266},
+	{"adis16250", ADIS16260},
+	{"adis16255", ADIS16260},
+	{"adis16251", ADIS16251},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, adis16260_id);
+
+static struct spi_driver adis16260_driver = {
+	.driver = {
+		.name = "adis16260",
+	},
+	.probe = adis16260_probe,
+	.id_table = adis16260_id,
+};
+module_spi_driver(adis16260_driver);
+
+MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
+MODULE_DESCRIPTION("Analog Devices ADIS16260/5 Digital Gyroscope Sensor");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ADISLIB);
diff --git a/drivers/iio/gyro/adxrs290.c b/drivers/iio/gyro/adxrs290.c
new file mode 100644
index 000000000..600e9725d
--- /dev/null
+++ b/drivers/iio/gyro/adxrs290.c
@@ -0,0 +1,708 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * ADXRS290 SPI Gyroscope Driver
+ *
+ * Copyright (C) 2020 Nishant Malpani <nish.malpani25@gmail.com>
+ * Copyright (C) 2020 Analog Devices, Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define ADXRS290_ADI_ID		0xAD
+#define ADXRS290_MEMS_ID	0x1D
+#define ADXRS290_DEV_ID		0x92
+
+#define ADXRS290_REG_ADI_ID	0x00
+#define ADXRS290_REG_MEMS_ID	0x01
+#define ADXRS290_REG_DEV_ID	0x02
+#define ADXRS290_REG_REV_ID	0x03
+#define ADXRS290_REG_SN0	0x04 /* Serial Number Registers, 4 bytes */
+#define ADXRS290_REG_DATAX0	0x08 /* Roll Rate o/p Data Regs, 2 bytes */
+#define ADXRS290_REG_DATAY0	0x0A /* Pitch Rate o/p Data Regs, 2 bytes */
+#define ADXRS290_REG_TEMP0	0x0C
+#define ADXRS290_REG_POWER_CTL	0x10
+#define ADXRS290_REG_FILTER	0x11
+#define ADXRS290_REG_DATA_RDY	0x12
+
+#define ADXRS290_READ		BIT(7)
+#define ADXRS290_TSM		BIT(0)
+#define ADXRS290_MEASUREMENT	BIT(1)
+#define ADXRS290_DATA_RDY_OUT	BIT(0)
+#define ADXRS290_SYNC_MASK	GENMASK(1, 0)
+#define ADXRS290_SYNC(x)	FIELD_PREP(ADXRS290_SYNC_MASK, x)
+#define ADXRS290_LPF_MASK	GENMASK(2, 0)
+#define ADXRS290_LPF(x)		FIELD_PREP(ADXRS290_LPF_MASK, x)
+#define ADXRS290_HPF_MASK	GENMASK(7, 4)
+#define ADXRS290_HPF(x)		FIELD_PREP(ADXRS290_HPF_MASK, x)
+
+#define ADXRS290_READ_REG(reg)	(ADXRS290_READ | (reg))
+
+#define ADXRS290_MAX_TRANSITION_TIME_MS 100
+
+enum adxrs290_mode {
+	ADXRS290_MODE_STANDBY,
+	ADXRS290_MODE_MEASUREMENT,
+};
+
+enum adxrs290_scan_index {
+	ADXRS290_IDX_X,
+	ADXRS290_IDX_Y,
+	ADXRS290_IDX_TEMP,
+	ADXRS290_IDX_TS,
+};
+
+struct adxrs290_state {
+	struct spi_device	*spi;
+	/* Serialize reads and their subsequent processing */
+	struct mutex		lock;
+	enum adxrs290_mode	mode;
+	unsigned int		lpf_3db_freq_idx;
+	unsigned int		hpf_3db_freq_idx;
+	struct iio_trigger      *dready_trig;
+	/* Ensure correct alignment of timestamp when present */
+	struct {
+		s16 channels[3];
+		s64 ts __aligned(8);
+	} buffer;
+};
+
+/*
+ * Available cut-off frequencies of the low pass filter in Hz.
+ * The integer part and fractional part are represented separately.
+ */
+static const int adxrs290_lpf_3db_freq_hz_table[][2] = {
+	[0] = {480, 0},
+	[1] = {320, 0},
+	[2] = {160, 0},
+	[3] = {80, 0},
+	[4] = {56, 600000},
+	[5] = {40, 0},
+	[6] = {28, 300000},
+	[7] = {20, 0},
+};
+
+/*
+ * Available cut-off frequencies of the high pass filter in Hz.
+ * The integer part and fractional part are represented separately.
+ */
+static const int adxrs290_hpf_3db_freq_hz_table[][2] = {
+	[0] = {0, 0},
+	[1] = {0, 11000},
+	[2] = {0, 22000},
+	[3] = {0, 44000},
+	[4] = {0, 87000},
+	[5] = {0, 175000},
+	[6] = {0, 350000},
+	[7] = {0, 700000},
+	[8] = {1, 400000},
+	[9] = {2, 800000},
+	[10] = {11, 300000},
+};
+
+static int adxrs290_get_rate_data(struct iio_dev *indio_dev, const u8 cmd, int *val)
+{
+	struct adxrs290_state *st = iio_priv(indio_dev);
+	int ret = 0;
+	int temp;
+
+	mutex_lock(&st->lock);
+	temp = spi_w8r16(st->spi, cmd);
+	if (temp < 0) {
+		ret = temp;
+		goto err_unlock;
+	}
+
+	*val = sign_extend32(temp, 15);
+
+err_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+static int adxrs290_get_temp_data(struct iio_dev *indio_dev, int *val)
+{
+	const u8 cmd = ADXRS290_READ_REG(ADXRS290_REG_TEMP0);
+	struct adxrs290_state *st = iio_priv(indio_dev);
+	int ret = 0;
+	int temp;
+
+	mutex_lock(&st->lock);
+	temp = spi_w8r16(st->spi, cmd);
+	if (temp < 0) {
+		ret = temp;
+		goto err_unlock;
+	}
+
+	/* extract lower 12 bits temperature reading */
+	*val = sign_extend32(temp, 11);
+
+err_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+static int adxrs290_get_3db_freq(struct iio_dev *indio_dev, u8 *val, u8 *val2)
+{
+	const u8 cmd = ADXRS290_READ_REG(ADXRS290_REG_FILTER);
+	struct adxrs290_state *st = iio_priv(indio_dev);
+	int ret = 0;
+	short temp;
+
+	mutex_lock(&st->lock);
+	temp = spi_w8r8(st->spi, cmd);
+	if (temp < 0) {
+		ret = temp;
+		goto err_unlock;
+	}
+
+	*val = FIELD_GET(ADXRS290_LPF_MASK, temp);
+	*val2 = FIELD_GET(ADXRS290_HPF_MASK, temp);
+
+err_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+static int adxrs290_spi_write_reg(struct spi_device *spi, const u8 reg,
+				  const u8 val)
+{
+	u8 buf[2];
+
+	buf[0] = reg;
+	buf[1] = val;
+
+	return spi_write_then_read(spi, buf, ARRAY_SIZE(buf), NULL, 0);
+}
+
+static int adxrs290_find_match(const int (*freq_tbl)[2], const int n,
+			       const int val, const int val2)
+{
+	int i;
+
+	for (i = 0; i < n; i++) {
+		if (freq_tbl[i][0] == val && freq_tbl[i][1] == val2)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static int adxrs290_set_filter_freq(struct iio_dev *indio_dev,
+				    const unsigned int lpf_idx,
+				    const unsigned int hpf_idx)
+{
+	struct adxrs290_state *st = iio_priv(indio_dev);
+	u8 val;
+
+	val = ADXRS290_HPF(hpf_idx) | ADXRS290_LPF(lpf_idx);
+
+	return adxrs290_spi_write_reg(st->spi, ADXRS290_REG_FILTER, val);
+}
+
+static int adxrs290_set_mode(struct iio_dev *indio_dev, enum adxrs290_mode mode)
+{
+	struct adxrs290_state *st = iio_priv(indio_dev);
+	int val, ret;
+
+	if (st->mode == mode)
+		return 0;
+
+	mutex_lock(&st->lock);
+
+	ret = spi_w8r8(st->spi, ADXRS290_READ_REG(ADXRS290_REG_POWER_CTL));
+	if (ret < 0)
+		goto out_unlock;
+
+	val = ret;
+
+	switch (mode) {
+	case ADXRS290_MODE_STANDBY:
+		val &= ~ADXRS290_MEASUREMENT;
+		break;
+	case ADXRS290_MODE_MEASUREMENT:
+		val |= ADXRS290_MEASUREMENT;
+		break;
+	default:
+		ret = -EINVAL;
+		goto out_unlock;
+	}
+
+	ret = adxrs290_spi_write_reg(st->spi, ADXRS290_REG_POWER_CTL, val);
+	if (ret < 0) {
+		dev_err(&st->spi->dev, "unable to set mode: %d\n", ret);
+		goto out_unlock;
+	}
+
+	/* update cached mode */
+	st->mode = mode;
+
+out_unlock:
+	mutex_unlock(&st->lock);
+	return ret;
+}
+
+static void adxrs290_chip_off_action(void *data)
+{
+	struct iio_dev *indio_dev = data;
+
+	adxrs290_set_mode(indio_dev, ADXRS290_MODE_STANDBY);
+}
+
+static int adxrs290_initial_setup(struct iio_dev *indio_dev)
+{
+	struct adxrs290_state *st = iio_priv(indio_dev);
+	struct spi_device *spi = st->spi;
+	int ret;
+
+	ret = adxrs290_spi_write_reg(spi, ADXRS290_REG_POWER_CTL,
+				     ADXRS290_MEASUREMENT | ADXRS290_TSM);
+	if (ret < 0)
+		return ret;
+
+	st->mode = ADXRS290_MODE_MEASUREMENT;
+
+	return devm_add_action_or_reset(&spi->dev, adxrs290_chip_off_action,
+					indio_dev);
+}
+
+static int adxrs290_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val,
+			     int *val2,
+			     long mask)
+{
+	struct adxrs290_state *st = iio_priv(indio_dev);
+	unsigned int t;
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			ret = adxrs290_get_rate_data(indio_dev,
+						     ADXRS290_READ_REG(chan->address),
+						     val);
+			if (ret < 0)
+				break;
+
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_TEMP:
+			ret = adxrs290_get_temp_data(indio_dev, val);
+			if (ret < 0)
+				break;
+
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			/* 1 LSB = 0.005 degrees/sec */
+			*val = 0;
+			*val2 = 87266;
+			return IIO_VAL_INT_PLUS_NANO;
+		case IIO_TEMP:
+			/* 1 LSB = 0.1 degrees Celsius */
+			*val = 100;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			t = st->lpf_3db_freq_idx;
+			*val = adxrs290_lpf_3db_freq_hz_table[t][0];
+			*val2 = adxrs290_lpf_3db_freq_hz_table[t][1];
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			t = st->hpf_3db_freq_idx;
+			*val = adxrs290_hpf_3db_freq_hz_table[t][0];
+			*val2 = adxrs290_hpf_3db_freq_hz_table[t][1];
+			return IIO_VAL_INT_PLUS_MICRO;
+		default:
+			return -EINVAL;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int adxrs290_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val,
+			      int val2,
+			      long mask)
+{
+	struct adxrs290_state *st = iio_priv(indio_dev);
+	int ret, lpf_idx, hpf_idx;
+
+	ret = iio_device_claim_direct_mode(indio_dev);
+	if (ret)
+		return ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		lpf_idx = adxrs290_find_match(adxrs290_lpf_3db_freq_hz_table,
+					      ARRAY_SIZE(adxrs290_lpf_3db_freq_hz_table),
+					      val, val2);
+		if (lpf_idx < 0) {
+			ret = -EINVAL;
+			break;
+		}
+
+		/* caching the updated state of the low-pass filter */
+		st->lpf_3db_freq_idx = lpf_idx;
+		/* retrieving the current state of the high-pass filter */
+		hpf_idx = st->hpf_3db_freq_idx;
+		ret = adxrs290_set_filter_freq(indio_dev, lpf_idx, hpf_idx);
+		break;
+
+	case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
+		hpf_idx = adxrs290_find_match(adxrs290_hpf_3db_freq_hz_table,
+					      ARRAY_SIZE(adxrs290_hpf_3db_freq_hz_table),
+					      val, val2);
+		if (hpf_idx < 0) {
+			ret = -EINVAL;
+			break;
+		}
+
+		/* caching the updated state of the high-pass filter */
+		st->hpf_3db_freq_idx = hpf_idx;
+		/* retrieving the current state of the low-pass filter */
+		lpf_idx = st->lpf_3db_freq_idx;
+		ret = adxrs290_set_filter_freq(indio_dev, lpf_idx, hpf_idx);
+		break;
+
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	iio_device_release_direct_mode(indio_dev);
+	return ret;
+}
+
+static int adxrs290_read_avail(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       const int **vals, int *type, int *length,
+			       long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		*vals = (const int *)adxrs290_lpf_3db_freq_hz_table;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		/* Values are stored in a 2D matrix */
+		*length = ARRAY_SIZE(adxrs290_lpf_3db_freq_hz_table) * 2;
+
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
+		*vals = (const int *)adxrs290_hpf_3db_freq_hz_table;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		/* Values are stored in a 2D matrix */
+		*length = ARRAY_SIZE(adxrs290_hpf_3db_freq_hz_table) * 2;
+
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int adxrs290_reg_access_rw(struct spi_device *spi, unsigned int reg,
+				  unsigned int *readval)
+{
+	int ret;
+
+	ret = spi_w8r8(spi, ADXRS290_READ_REG(reg));
+	if (ret < 0)
+		return ret;
+
+	*readval = ret;
+
+	return 0;
+}
+
+static int adxrs290_reg_access(struct iio_dev *indio_dev, unsigned int reg,
+			       unsigned int writeval, unsigned int *readval)
+{
+	struct adxrs290_state *st = iio_priv(indio_dev);
+
+	if (readval)
+		return adxrs290_reg_access_rw(st->spi, reg, readval);
+	else
+		return adxrs290_spi_write_reg(st->spi, reg, writeval);
+}
+
+static int adxrs290_data_rdy_trigger_set_state(struct iio_trigger *trig,
+					       bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct adxrs290_state *st = iio_priv(indio_dev);
+	int ret;
+	u8 val;
+
+	val = state ? ADXRS290_SYNC(ADXRS290_DATA_RDY_OUT) : 0;
+
+	ret = adxrs290_spi_write_reg(st->spi, ADXRS290_REG_DATA_RDY, val);
+	if (ret < 0)
+		dev_err(&st->spi->dev, "failed to start data rdy interrupt\n");
+
+	return ret;
+}
+
+static void adxrs290_reset_trig(struct iio_trigger *trig)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	int val;
+
+	/*
+	 * Data ready interrupt is reset after a read of the data registers.
+	 * Here, we only read the 16b DATAY registers as that marks the end of
+	 * a read of the data registers and initiates a reset for the interrupt
+	 * line.
+	 */
+	adxrs290_get_rate_data(indio_dev,
+			       ADXRS290_READ_REG(ADXRS290_REG_DATAY0), &val);
+}
+
+static const struct iio_trigger_ops adxrs290_trigger_ops = {
+	.set_trigger_state = &adxrs290_data_rdy_trigger_set_state,
+	.validate_device = &iio_trigger_validate_own_device,
+	.reenable = &adxrs290_reset_trig,
+};
+
+static irqreturn_t adxrs290_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct adxrs290_state *st = iio_priv(indio_dev);
+	u8 tx = ADXRS290_READ_REG(ADXRS290_REG_DATAX0);
+	int ret;
+
+	mutex_lock(&st->lock);
+
+	/* exercise a bulk data capture starting from reg DATAX0... */
+	ret = spi_write_then_read(st->spi, &tx, sizeof(tx), st->buffer.channels,
+				  sizeof(st->buffer.channels));
+	if (ret < 0)
+		goto out_unlock_notify;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &st->buffer,
+					   pf->timestamp);
+
+out_unlock_notify:
+	mutex_unlock(&st->lock);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+#define ADXRS290_ANGL_VEL_CHANNEL(reg, axis) {				\
+	.type = IIO_ANGL_VEL,						\
+	.address = reg,							\
+	.modified = 1,							\
+	.channel2 = IIO_MOD_##axis,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
+	BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |		\
+	BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY),		\
+	.info_mask_shared_by_type_available =				\
+	BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |		\
+	BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY),		\
+	.scan_index = ADXRS290_IDX_##axis,				\
+	.scan_type = {                                                  \
+		.sign = 's',                                            \
+		.realbits = 16,                                         \
+		.storagebits = 16,                                      \
+		.endianness = IIO_LE,					\
+	},                                                              \
+}
+
+static const struct iio_chan_spec adxrs290_channels[] = {
+	ADXRS290_ANGL_VEL_CHANNEL(ADXRS290_REG_DATAX0, X),
+	ADXRS290_ANGL_VEL_CHANNEL(ADXRS290_REG_DATAY0, Y),
+	{
+		.type = IIO_TEMP,
+		.address = ADXRS290_REG_TEMP0,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+		BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = ADXRS290_IDX_TEMP,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 12,
+			.storagebits = 16,
+			.endianness = IIO_LE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(ADXRS290_IDX_TS),
+};
+
+static const unsigned long adxrs290_avail_scan_masks[] = {
+	BIT(ADXRS290_IDX_X) | BIT(ADXRS290_IDX_Y) | BIT(ADXRS290_IDX_TEMP),
+	0
+};
+
+static const struct iio_info adxrs290_info = {
+	.read_raw = &adxrs290_read_raw,
+	.write_raw = &adxrs290_write_raw,
+	.read_avail = &adxrs290_read_avail,
+	.debugfs_reg_access = &adxrs290_reg_access,
+};
+
+static int adxrs290_probe_trigger(struct iio_dev *indio_dev)
+{
+	struct adxrs290_state *st = iio_priv(indio_dev);
+	int ret;
+
+	if (!st->spi->irq) {
+		dev_info(&st->spi->dev, "no irq, using polling\n");
+		return 0;
+	}
+
+	st->dready_trig = devm_iio_trigger_alloc(&st->spi->dev, "%s-dev%d",
+						 indio_dev->name,
+						 iio_device_id(indio_dev));
+	if (!st->dready_trig)
+		return -ENOMEM;
+
+	st->dready_trig->ops = &adxrs290_trigger_ops;
+	iio_trigger_set_drvdata(st->dready_trig, indio_dev);
+
+	ret = devm_request_irq(&st->spi->dev, st->spi->irq,
+			       &iio_trigger_generic_data_rdy_poll,
+			       IRQF_ONESHOT, "adxrs290_irq", st->dready_trig);
+	if (ret < 0)
+		return dev_err_probe(&st->spi->dev, ret,
+				     "request irq %d failed\n", st->spi->irq);
+
+	ret = devm_iio_trigger_register(&st->spi->dev, st->dready_trig);
+	if (ret) {
+		dev_err(&st->spi->dev, "iio trigger register failed\n");
+		return ret;
+	}
+
+	indio_dev->trig = iio_trigger_get(st->dready_trig);
+
+	return 0;
+}
+
+static int adxrs290_probe(struct spi_device *spi)
+{
+	struct iio_dev *indio_dev;
+	struct adxrs290_state *st;
+	u8 val, val2;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	st->spi = spi;
+
+	indio_dev->name = "adxrs290";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = adxrs290_channels;
+	indio_dev->num_channels = ARRAY_SIZE(adxrs290_channels);
+	indio_dev->info = &adxrs290_info;
+	indio_dev->available_scan_masks = adxrs290_avail_scan_masks;
+
+	mutex_init(&st->lock);
+
+	val = spi_w8r8(spi, ADXRS290_READ_REG(ADXRS290_REG_ADI_ID));
+	if (val != ADXRS290_ADI_ID) {
+		dev_err(&spi->dev, "Wrong ADI ID 0x%02x\n", val);
+		return -ENODEV;
+	}
+
+	val = spi_w8r8(spi, ADXRS290_READ_REG(ADXRS290_REG_MEMS_ID));
+	if (val != ADXRS290_MEMS_ID) {
+		dev_err(&spi->dev, "Wrong MEMS ID 0x%02x\n", val);
+		return -ENODEV;
+	}
+
+	val = spi_w8r8(spi, ADXRS290_READ_REG(ADXRS290_REG_DEV_ID));
+	if (val != ADXRS290_DEV_ID) {
+		dev_err(&spi->dev, "Wrong DEV ID 0x%02x\n", val);
+		return -ENODEV;
+	}
+
+	/* default mode the gyroscope starts in */
+	st->mode = ADXRS290_MODE_STANDBY;
+
+	/* switch to measurement mode and switch on the temperature sensor */
+	ret = adxrs290_initial_setup(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	/* max transition time to measurement mode */
+	msleep(ADXRS290_MAX_TRANSITION_TIME_MS);
+
+	ret = adxrs290_get_3db_freq(indio_dev, &val, &val2);
+	if (ret < 0)
+		return ret;
+
+	st->lpf_3db_freq_idx = val;
+	st->hpf_3db_freq_idx = val2;
+
+	ret = devm_iio_triggered_buffer_setup(&spi->dev, indio_dev,
+					      &iio_pollfunc_store_time,
+					      &adxrs290_trigger_handler, NULL);
+	if (ret < 0)
+		return dev_err_probe(&spi->dev, ret,
+				     "iio triggered buffer setup failed\n");
+
+	ret = adxrs290_probe_trigger(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	return devm_iio_device_register(&spi->dev, indio_dev);
+}
+
+static const struct of_device_id adxrs290_of_match[] = {
+	{ .compatible = "adi,adxrs290" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, adxrs290_of_match);
+
+static struct spi_driver adxrs290_driver = {
+	.driver = {
+		.name = "adxrs290",
+		.of_match_table = adxrs290_of_match,
+	},
+	.probe = adxrs290_probe,
+};
+module_spi_driver(adxrs290_driver);
+
+MODULE_AUTHOR("Nishant Malpani <nish.malpani25@gmail.com>");
+MODULE_DESCRIPTION("Analog Devices ADXRS290 Gyroscope SPI driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/gyro/adxrs450.c b/drivers/iio/gyro/adxrs450.c
new file mode 100644
index 000000000..f84438e0c
--- /dev/null
+++ b/drivers/iio/gyro/adxrs450.c
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * ADXRS450/ADXRS453 Digital Output Gyroscope Driver
+ *
+ * Copyright 2011 Analog Devices Inc.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/mutex.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/spi/spi.h>
+#include <linux/slab.h>
+#include <linux/sysfs.h>
+#include <linux/list.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#define ADXRS450_STARTUP_DELAY	50 /* ms */
+
+/* The MSB for the spi commands */
+#define ADXRS450_SENSOR_DATA    (0x20 << 24)
+#define ADXRS450_WRITE_DATA	(0x40 << 24)
+#define ADXRS450_READ_DATA	(0x80 << 24)
+
+#define ADXRS450_RATE1	0x00	/* Rate Registers */
+#define ADXRS450_TEMP1	0x02	/* Temperature Registers */
+#define ADXRS450_LOCST1	0x04	/* Low CST Memory Registers */
+#define ADXRS450_HICST1	0x06	/* High CST Memory Registers */
+#define ADXRS450_QUAD1	0x08	/* Quad Memory Registers */
+#define ADXRS450_FAULT1	0x0A	/* Fault Registers */
+#define ADXRS450_PID1	0x0C	/* Part ID Register 1 */
+#define ADXRS450_SNH	0x0E	/* Serial Number Registers, 4 bytes */
+#define ADXRS450_SNL	0x10
+#define ADXRS450_DNC1	0x12	/* Dynamic Null Correction Registers */
+/* Check bits */
+#define ADXRS450_P	0x01
+#define ADXRS450_CHK	0x02
+#define ADXRS450_CST	0x04
+#define ADXRS450_PWR	0x08
+#define ADXRS450_POR	0x10
+#define ADXRS450_NVM	0x20
+#define ADXRS450_Q	0x40
+#define ADXRS450_PLL	0x80
+#define ADXRS450_UV	0x100
+#define ADXRS450_OV	0x200
+#define ADXRS450_AMP	0x400
+#define ADXRS450_FAIL	0x800
+
+#define ADXRS450_WRERR_MASK	(0x7 << 29)
+
+#define ADXRS450_MAX_RX 4
+#define ADXRS450_MAX_TX 4
+
+#define ADXRS450_GET_ST(a)	((a >> 26) & 0x3)
+
+enum {
+	ID_ADXRS450,
+	ID_ADXRS453,
+};
+
+/**
+ * struct adxrs450_state - device instance specific data
+ * @us:			actual spi_device
+ * @buf_lock:		mutex to protect tx and rx
+ * @tx:			transmit buffer
+ * @rx:			receive buffer
+ **/
+struct adxrs450_state {
+	struct spi_device	*us;
+	struct mutex		buf_lock;
+	__be32			tx __aligned(IIO_DMA_MINALIGN);
+	__be32			rx;
+
+};
+
+/**
+ * adxrs450_spi_read_reg_16() - read 2 bytes from a register pair
+ * @indio_dev: device associated with child of actual iio_dev
+ * @reg_address: the address of the lower of the two registers, which should be
+ *	an even address, the second register's address is reg_address + 1.
+ * @val: somewhere to pass back the value read
+ **/
+static int adxrs450_spi_read_reg_16(struct iio_dev *indio_dev,
+				    u8 reg_address,
+				    u16 *val)
+{
+	struct adxrs450_state *st = iio_priv(indio_dev);
+	u32 tx;
+	int ret;
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = &st->tx,
+			.bits_per_word = 8,
+			.len = sizeof(st->tx),
+			.cs_change = 1,
+		}, {
+			.rx_buf = &st->rx,
+			.bits_per_word = 8,
+			.len = sizeof(st->rx),
+		},
+	};
+
+	mutex_lock(&st->buf_lock);
+	tx = ADXRS450_READ_DATA | (reg_address << 17);
+
+	if (!(hweight32(tx) & 1))
+		tx |= ADXRS450_P;
+
+	st->tx = cpu_to_be32(tx);
+	ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
+	if (ret) {
+		dev_err(&st->us->dev, "problem while reading 16 bit register 0x%02x\n",
+				reg_address);
+		goto error_ret;
+	}
+
+	*val = (be32_to_cpu(st->rx) >> 5) & 0xFFFF;
+
+error_ret:
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
+/**
+ * adxrs450_spi_write_reg_16() - write 2 bytes data to a register pair
+ * @indio_dev: device associated with child of actual actual iio_dev
+ * @reg_address: the address of the lower of the two registers,which should be
+ *	an even address, the second register's address is reg_address + 1.
+ * @val: value to be written.
+ **/
+static int adxrs450_spi_write_reg_16(struct iio_dev *indio_dev,
+				     u8 reg_address,
+				     u16 val)
+{
+	struct adxrs450_state *st = iio_priv(indio_dev);
+	u32 tx;
+	int ret;
+
+	mutex_lock(&st->buf_lock);
+	tx = ADXRS450_WRITE_DATA | (reg_address << 17) | (val << 1);
+
+	if (!(hweight32(tx) & 1))
+		tx |= ADXRS450_P;
+
+	st->tx = cpu_to_be32(tx);
+	ret = spi_write(st->us, &st->tx, sizeof(st->tx));
+	if (ret)
+		dev_err(&st->us->dev, "problem while writing 16 bit register 0x%02x\n",
+			reg_address);
+	usleep_range(100, 1000); /* enforce sequential transfer delay 0.1ms */
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
+/**
+ * adxrs450_spi_sensor_data() - read 2 bytes sensor data
+ * @indio_dev: device associated with child of actual iio_dev
+ * @val: somewhere to pass back the value read
+ **/
+static int adxrs450_spi_sensor_data(struct iio_dev *indio_dev, s16 *val)
+{
+	struct adxrs450_state *st = iio_priv(indio_dev);
+	int ret;
+	struct spi_transfer xfers[] = {
+		{
+			.tx_buf = &st->tx,
+			.bits_per_word = 8,
+			.len = sizeof(st->tx),
+			.cs_change = 1,
+		}, {
+			.rx_buf = &st->rx,
+			.bits_per_word = 8,
+			.len = sizeof(st->rx),
+		},
+	};
+
+	mutex_lock(&st->buf_lock);
+	st->tx = cpu_to_be32(ADXRS450_SENSOR_DATA);
+
+	ret = spi_sync_transfer(st->us, xfers, ARRAY_SIZE(xfers));
+	if (ret) {
+		dev_err(&st->us->dev, "Problem while reading sensor data\n");
+		goto error_ret;
+	}
+
+	*val = (be32_to_cpu(st->rx) >> 10) & 0xFFFF;
+
+error_ret:
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
+/**
+ * adxrs450_spi_initial() - use for initializing procedure.
+ * @st: device instance specific data
+ * @val: somewhere to pass back the value read
+ * @chk: Whether to perform fault check
+ **/
+static int adxrs450_spi_initial(struct adxrs450_state *st,
+		u32 *val, char chk)
+{
+	int ret;
+	u32 tx;
+	struct spi_transfer xfers = {
+		.tx_buf = &st->tx,
+		.rx_buf = &st->rx,
+		.bits_per_word = 8,
+		.len = sizeof(st->tx),
+	};
+
+	mutex_lock(&st->buf_lock);
+	tx = ADXRS450_SENSOR_DATA;
+	if (chk)
+		tx |= (ADXRS450_CHK | ADXRS450_P);
+	st->tx = cpu_to_be32(tx);
+	ret = spi_sync_transfer(st->us, &xfers, 1);
+	if (ret) {
+		dev_err(&st->us->dev, "Problem while reading initializing data\n");
+		goto error_ret;
+	}
+
+	*val = be32_to_cpu(st->rx);
+
+error_ret:
+	mutex_unlock(&st->buf_lock);
+	return ret;
+}
+
+/* Recommended Startup Sequence by spec */
+static int adxrs450_initial_setup(struct iio_dev *indio_dev)
+{
+	u32 t;
+	u16 data;
+	int ret;
+	struct adxrs450_state *st = iio_priv(indio_dev);
+
+	msleep(ADXRS450_STARTUP_DELAY*2);
+	ret = adxrs450_spi_initial(st, &t, 1);
+	if (ret)
+		return ret;
+	if (t != 0x01)
+		dev_warn(&st->us->dev, "The initial power on response is not correct! Restart without reset?\n");
+
+	msleep(ADXRS450_STARTUP_DELAY);
+	ret = adxrs450_spi_initial(st, &t, 0);
+	if (ret)
+		return ret;
+
+	msleep(ADXRS450_STARTUP_DELAY);
+	ret = adxrs450_spi_initial(st, &t, 0);
+	if (ret)
+		return ret;
+	if (((t & 0xff) | 0x01) != 0xff || ADXRS450_GET_ST(t) != 2) {
+		dev_err(&st->us->dev, "The second response is not correct!\n");
+		return -EIO;
+
+	}
+	ret = adxrs450_spi_initial(st, &t, 0);
+	if (ret)
+		return ret;
+	if (((t & 0xff) | 0x01) != 0xff || ADXRS450_GET_ST(t) != 2) {
+		dev_err(&st->us->dev, "The third response is not correct!\n");
+		return -EIO;
+
+	}
+	ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_FAULT1, &data);
+	if (ret)
+		return ret;
+	if (data & 0x0fff) {
+		dev_err(&st->us->dev, "The device is not in normal status!\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int adxrs450_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val,
+			      int val2,
+			      long mask)
+{
+	int ret;
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (val < -0x400 || val >= 0x400)
+			return -EINVAL;
+		ret = adxrs450_spi_write_reg_16(indio_dev,
+						ADXRS450_DNC1, val);
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+static int adxrs450_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val,
+			     int *val2,
+			     long mask)
+{
+	int ret;
+	s16 t;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			ret = adxrs450_spi_sensor_data(indio_dev, &t);
+			if (ret)
+				break;
+			*val = t;
+			ret = IIO_VAL_INT;
+			break;
+		case IIO_TEMP:
+			ret = adxrs450_spi_read_reg_16(indio_dev,
+						       ADXRS450_TEMP1, &t);
+			if (ret)
+				break;
+			*val = (t >> 6) + 225;
+			ret = IIO_VAL_INT;
+			break;
+		default:
+			ret = -EINVAL;
+			break;
+		}
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = 0;
+			*val2 = 218166;
+			return IIO_VAL_INT_PLUS_NANO;
+		case IIO_TEMP:
+			*val = 200;
+			*val2 = 0;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW:
+		ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_QUAD1, &t);
+		if (ret)
+			break;
+		*val = t;
+		ret = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_CALIBBIAS:
+		ret = adxrs450_spi_read_reg_16(indio_dev, ADXRS450_DNC1, &t);
+		if (ret)
+			break;
+		*val = sign_extend32(t, 9);
+		ret = IIO_VAL_INT;
+		break;
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static const struct iio_chan_spec adxrs450_channels[2][2] = {
+	[ID_ADXRS450] = {
+		{
+			.type = IIO_ANGL_VEL,
+			.modified = 1,
+			.channel2 = IIO_MOD_Z,
+			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_CALIBBIAS) |
+			BIT(IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		}, {
+			.type = IIO_TEMP,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		}
+	},
+	[ID_ADXRS453] = {
+		{
+			.type = IIO_ANGL_VEL,
+			.modified = 1,
+			.channel2 = IIO_MOD_Z,
+			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_QUADRATURE_CORRECTION_RAW),
+		}, {
+			.type = IIO_TEMP,
+			.indexed = 1,
+			.channel = 0,
+			.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		}
+	},
+};
+
+static const struct iio_info adxrs450_info = {
+	.read_raw = &adxrs450_read_raw,
+	.write_raw = &adxrs450_write_raw,
+};
+
+static int adxrs450_probe(struct spi_device *spi)
+{
+	int ret;
+	struct adxrs450_state *st;
+	struct iio_dev *indio_dev;
+
+	/* setup the industrialio driver allocated elements */
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+	st = iio_priv(indio_dev);
+	st->us = spi;
+	mutex_init(&st->buf_lock);
+	/* This is only used for removal purposes */
+	spi_set_drvdata(spi, indio_dev);
+
+	indio_dev->info = &adxrs450_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels =
+		adxrs450_channels[spi_get_device_id(spi)->driver_data];
+	indio_dev->num_channels = ARRAY_SIZE(adxrs450_channels);
+	indio_dev->name = spi->dev.driver->name;
+
+	ret = devm_iio_device_register(&spi->dev, indio_dev);
+	if (ret)
+		return ret;
+
+	/* Get the device into a sane initial state */
+	ret = adxrs450_initial_setup(indio_dev);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct spi_device_id adxrs450_id[] = {
+	{"adxrs450", ID_ADXRS450},
+	{"adxrs453", ID_ADXRS453},
+	{}
+};
+MODULE_DEVICE_TABLE(spi, adxrs450_id);
+
+static struct spi_driver adxrs450_driver = {
+	.driver = {
+		.name = "adxrs450",
+	},
+	.probe = adxrs450_probe,
+	.id_table	= adxrs450_id,
+};
+module_spi_driver(adxrs450_driver);
+
+MODULE_AUTHOR("Cliff Cai <cliff.cai@xxxxxxxxxx>");
+MODULE_DESCRIPTION("Analog Devices ADXRS450/ADXRS453 Gyroscope SPI driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/bmg160.h b/drivers/iio/gyro/bmg160.h
new file mode 100644
index 000000000..6bcff6562
--- /dev/null
+++ b/drivers/iio/gyro/bmg160.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef BMG160_H_
+#define BMG160_H_
+
+extern const struct dev_pm_ops bmg160_pm_ops;
+
+int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
+		      const char *name);
+void bmg160_core_remove(struct device *dev);
+
+#endif  /* BMG160_H_ */
diff --git a/drivers/iio/gyro/bmg160_core.c b/drivers/iio/gyro/bmg160_core.c
new file mode 100644
index 000000000..cedd9f02e
--- /dev/null
+++ b/drivers/iio/gyro/bmg160_core.c
@@ -0,0 +1,1304 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * BMG160 Gyro Sensor driver
+ * Copyright (c) 2014, Intel Corporation.
+ */
+
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/events.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include "bmg160.h"
+
+#define BMG160_IRQ_NAME		"bmg160_event"
+
+#define BMG160_REG_CHIP_ID		0x00
+#define BMG160_CHIP_ID_VAL		0x0F
+
+#define BMG160_REG_PMU_LPW		0x11
+#define BMG160_MODE_NORMAL		0x00
+#define BMG160_MODE_DEEP_SUSPEND	0x20
+#define BMG160_MODE_SUSPEND		0x80
+
+#define BMG160_REG_RANGE		0x0F
+
+#define BMG160_RANGE_2000DPS		0
+#define BMG160_RANGE_1000DPS		1
+#define BMG160_RANGE_500DPS		2
+#define BMG160_RANGE_250DPS		3
+#define BMG160_RANGE_125DPS		4
+
+#define BMG160_REG_PMU_BW		0x10
+#define BMG160_NO_FILTER		0
+#define BMG160_DEF_BW			100
+#define BMG160_REG_PMU_BW_RES		BIT(7)
+
+#define BMG160_GYRO_REG_RESET		0x14
+#define BMG160_GYRO_RESET_VAL		0xb6
+
+#define BMG160_REG_INT_MAP_0		0x17
+#define BMG160_INT_MAP_0_BIT_ANY	BIT(1)
+
+#define BMG160_REG_INT_MAP_1		0x18
+#define BMG160_INT_MAP_1_BIT_NEW_DATA	BIT(0)
+
+#define BMG160_REG_INT_RST_LATCH	0x21
+#define BMG160_INT_MODE_LATCH_RESET	0x80
+#define BMG160_INT_MODE_LATCH_INT	0x0F
+#define BMG160_INT_MODE_NON_LATCH_INT	0x00
+
+#define BMG160_REG_INT_EN_0		0x15
+#define BMG160_DATA_ENABLE_INT		BIT(7)
+
+#define BMG160_REG_INT_EN_1		0x16
+#define BMG160_INT1_BIT_OD		BIT(1)
+
+#define BMG160_REG_XOUT_L		0x02
+#define BMG160_AXIS_TO_REG(axis)	(BMG160_REG_XOUT_L + (axis * 2))
+
+#define BMG160_REG_SLOPE_THRES		0x1B
+#define BMG160_SLOPE_THRES_MASK	0x0F
+
+#define BMG160_REG_MOTION_INTR		0x1C
+#define BMG160_INT_MOTION_X		BIT(0)
+#define BMG160_INT_MOTION_Y		BIT(1)
+#define BMG160_INT_MOTION_Z		BIT(2)
+#define BMG160_ANY_DUR_MASK		0x30
+#define BMG160_ANY_DUR_SHIFT		4
+
+#define BMG160_REG_INT_STATUS_2	0x0B
+#define BMG160_ANY_MOTION_MASK		0x07
+#define BMG160_ANY_MOTION_BIT_X		BIT(0)
+#define BMG160_ANY_MOTION_BIT_Y		BIT(1)
+#define BMG160_ANY_MOTION_BIT_Z		BIT(2)
+
+#define BMG160_REG_TEMP		0x08
+#define BMG160_TEMP_CENTER_VAL		23
+
+#define BMG160_MAX_STARTUP_TIME_MS	80
+
+#define BMG160_AUTO_SUSPEND_DELAY_MS	2000
+
+struct bmg160_data {
+	struct regmap *regmap;
+	struct regulator_bulk_data regulators[2];
+	struct iio_trigger *dready_trig;
+	struct iio_trigger *motion_trig;
+	struct iio_mount_matrix orientation;
+	struct mutex mutex;
+	/* Ensure naturally aligned timestamp */
+	struct {
+		s16 chans[3];
+		s64 timestamp __aligned(8);
+	} scan;
+	u32 dps_range;
+	int ev_enable_state;
+	int slope_thres;
+	bool dready_trigger_on;
+	bool motion_trigger_on;
+	int irq;
+};
+
+enum bmg160_axis {
+	AXIS_X,
+	AXIS_Y,
+	AXIS_Z,
+	AXIS_MAX,
+};
+
+static const struct {
+	int odr;
+	int filter;
+	int bw_bits;
+} bmg160_samp_freq_table[] = { {100, 32, 0x07},
+			       {200, 64, 0x06},
+			       {100, 12, 0x05},
+			       {200, 23, 0x04},
+			       {400, 47, 0x03},
+			       {1000, 116, 0x02},
+			       {2000, 230, 0x01} };
+
+static const struct {
+	int scale;
+	int dps_range;
+} bmg160_scale_table[] = { { 1065, BMG160_RANGE_2000DPS},
+			   { 532, BMG160_RANGE_1000DPS},
+			   { 266, BMG160_RANGE_500DPS},
+			   { 133, BMG160_RANGE_250DPS},
+			   { 66, BMG160_RANGE_125DPS} };
+
+static int bmg160_set_mode(struct bmg160_data *data, u8 mode)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+
+	ret = regmap_write(data->regmap, BMG160_REG_PMU_LPW, mode);
+	if (ret < 0) {
+		dev_err(dev, "Error writing reg_pmu_lpw\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bmg160_convert_freq_to_bit(int val)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
+		if (bmg160_samp_freq_table[i].odr == val)
+			return bmg160_samp_freq_table[i].bw_bits;
+	}
+
+	return -EINVAL;
+}
+
+static int bmg160_set_bw(struct bmg160_data *data, int val)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	int bw_bits;
+
+	bw_bits = bmg160_convert_freq_to_bit(val);
+	if (bw_bits < 0)
+		return bw_bits;
+
+	ret = regmap_write(data->regmap, BMG160_REG_PMU_BW, bw_bits);
+	if (ret < 0) {
+		dev_err(dev, "Error writing reg_pmu_bw\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bmg160_get_filter(struct bmg160_data *data, int *val)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	int i;
+	unsigned int bw_bits;
+
+	ret = regmap_read(data->regmap, BMG160_REG_PMU_BW, &bw_bits);
+	if (ret < 0) {
+		dev_err(dev, "Error reading reg_pmu_bw\n");
+		return ret;
+	}
+
+	/* Ignore the readonly reserved bit. */
+	bw_bits &= ~BMG160_REG_PMU_BW_RES;
+
+	for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
+		if (bmg160_samp_freq_table[i].bw_bits == bw_bits)
+			break;
+	}
+
+	*val = bmg160_samp_freq_table[i].filter;
+
+	return ret ? ret : IIO_VAL_INT;
+}
+
+
+static int bmg160_set_filter(struct bmg160_data *data, int val)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
+		if (bmg160_samp_freq_table[i].filter == val)
+			break;
+	}
+
+	ret = regmap_write(data->regmap, BMG160_REG_PMU_BW,
+			   bmg160_samp_freq_table[i].bw_bits);
+	if (ret < 0) {
+		dev_err(dev, "Error writing reg_pmu_bw\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bmg160_chip_init(struct bmg160_data *data)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	unsigned int val;
+
+	/*
+	 * Reset chip to get it in a known good state. A delay of 30ms after
+	 * reset is required according to the datasheet.
+	 */
+	regmap_write(data->regmap, BMG160_GYRO_REG_RESET,
+		     BMG160_GYRO_RESET_VAL);
+	usleep_range(30000, 30700);
+
+	ret = regmap_read(data->regmap, BMG160_REG_CHIP_ID, &val);
+	if (ret < 0) {
+		dev_err(dev, "Error reading reg_chip_id\n");
+		return ret;
+	}
+
+	dev_dbg(dev, "Chip Id %x\n", val);
+	if (val != BMG160_CHIP_ID_VAL) {
+		dev_err(dev, "invalid chip %x\n", val);
+		return -ENODEV;
+	}
+
+	ret = bmg160_set_mode(data, BMG160_MODE_NORMAL);
+	if (ret < 0)
+		return ret;
+
+	/* Wait upto 500 ms to be ready after changing mode */
+	usleep_range(500, 1000);
+
+	/* Set Bandwidth */
+	ret = bmg160_set_bw(data, BMG160_DEF_BW);
+	if (ret < 0)
+		return ret;
+
+	/* Set Default Range */
+	ret = regmap_write(data->regmap, BMG160_REG_RANGE, BMG160_RANGE_500DPS);
+	if (ret < 0) {
+		dev_err(dev, "Error writing reg_range\n");
+		return ret;
+	}
+	data->dps_range = BMG160_RANGE_500DPS;
+
+	ret = regmap_read(data->regmap, BMG160_REG_SLOPE_THRES, &val);
+	if (ret < 0) {
+		dev_err(dev, "Error reading reg_slope_thres\n");
+		return ret;
+	}
+	data->slope_thres = val;
+
+	/* Set default interrupt mode */
+	ret = regmap_update_bits(data->regmap, BMG160_REG_INT_EN_1,
+				 BMG160_INT1_BIT_OD, 0);
+	if (ret < 0) {
+		dev_err(dev, "Error updating bits in reg_int_en_1\n");
+		return ret;
+	}
+
+	ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
+			   BMG160_INT_MODE_LATCH_INT |
+			   BMG160_INT_MODE_LATCH_RESET);
+	if (ret < 0) {
+		dev_err(dev,
+			"Error writing reg_motion_intr\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bmg160_set_power_state(struct bmg160_data *data, bool on)
+{
+#ifdef CONFIG_PM
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+
+	if (on)
+		ret = pm_runtime_get_sync(dev);
+	else {
+		pm_runtime_mark_last_busy(dev);
+		ret = pm_runtime_put_autosuspend(dev);
+	}
+
+	if (ret < 0) {
+		dev_err(dev, "Failed: bmg160_set_power_state for %d\n", on);
+
+		if (on)
+			pm_runtime_put_noidle(dev);
+
+		return ret;
+	}
+#endif
+
+	return 0;
+}
+
+static int bmg160_setup_any_motion_interrupt(struct bmg160_data *data,
+					     bool status)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+
+	/* Enable/Disable INT_MAP0 mapping */
+	ret = regmap_update_bits(data->regmap, BMG160_REG_INT_MAP_0,
+				 BMG160_INT_MAP_0_BIT_ANY,
+				 (status ? BMG160_INT_MAP_0_BIT_ANY : 0));
+	if (ret < 0) {
+		dev_err(dev, "Error updating bits reg_int_map0\n");
+		return ret;
+	}
+
+	/* Enable/Disable slope interrupts */
+	if (status) {
+		/* Update slope thres */
+		ret = regmap_write(data->regmap, BMG160_REG_SLOPE_THRES,
+				   data->slope_thres);
+		if (ret < 0) {
+			dev_err(dev, "Error writing reg_slope_thres\n");
+			return ret;
+		}
+
+		ret = regmap_write(data->regmap, BMG160_REG_MOTION_INTR,
+				   BMG160_INT_MOTION_X | BMG160_INT_MOTION_Y |
+				   BMG160_INT_MOTION_Z);
+		if (ret < 0) {
+			dev_err(dev, "Error writing reg_motion_intr\n");
+			return ret;
+		}
+
+		/*
+		 * New data interrupt is always non-latched,
+		 * which will have higher priority, so no need
+		 * to set latched mode, we will be flooded anyway with INTR
+		 */
+		if (!data->dready_trigger_on) {
+			ret = regmap_write(data->regmap,
+					   BMG160_REG_INT_RST_LATCH,
+					   BMG160_INT_MODE_LATCH_INT |
+					   BMG160_INT_MODE_LATCH_RESET);
+			if (ret < 0) {
+				dev_err(dev, "Error writing reg_rst_latch\n");
+				return ret;
+			}
+		}
+
+		ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0,
+				   BMG160_DATA_ENABLE_INT);
+
+	} else {
+		ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0);
+	}
+
+	if (ret < 0) {
+		dev_err(dev, "Error writing reg_int_en0\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bmg160_setup_new_data_interrupt(struct bmg160_data *data,
+					   bool status)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+
+	/* Enable/Disable INT_MAP1 mapping */
+	ret = regmap_update_bits(data->regmap, BMG160_REG_INT_MAP_1,
+				 BMG160_INT_MAP_1_BIT_NEW_DATA,
+				 (status ? BMG160_INT_MAP_1_BIT_NEW_DATA : 0));
+	if (ret < 0) {
+		dev_err(dev, "Error updating bits in reg_int_map1\n");
+		return ret;
+	}
+
+	if (status) {
+		ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
+				   BMG160_INT_MODE_NON_LATCH_INT |
+				   BMG160_INT_MODE_LATCH_RESET);
+		if (ret < 0) {
+			dev_err(dev, "Error writing reg_rst_latch\n");
+			return ret;
+		}
+
+		ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0,
+				   BMG160_DATA_ENABLE_INT);
+
+	} else {
+		/* Restore interrupt mode */
+		ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
+				   BMG160_INT_MODE_LATCH_INT |
+				   BMG160_INT_MODE_LATCH_RESET);
+		if (ret < 0) {
+			dev_err(dev, "Error writing reg_rst_latch\n");
+			return ret;
+		}
+
+		ret = regmap_write(data->regmap, BMG160_REG_INT_EN_0, 0);
+	}
+
+	if (ret < 0) {
+		dev_err(dev, "Error writing reg_int_en0\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int bmg160_get_bw(struct bmg160_data *data, int *val)
+{
+	struct device *dev = regmap_get_device(data->regmap);	
+	int i;
+	unsigned int bw_bits;
+	int ret;
+
+	ret = regmap_read(data->regmap, BMG160_REG_PMU_BW, &bw_bits);
+	if (ret < 0) {
+		dev_err(dev, "Error reading reg_pmu_bw\n");
+		return ret;
+	}
+
+	/* Ignore the readonly reserved bit. */
+	bw_bits &= ~BMG160_REG_PMU_BW_RES;
+
+	for (i = 0; i < ARRAY_SIZE(bmg160_samp_freq_table); ++i) {
+		if (bmg160_samp_freq_table[i].bw_bits == bw_bits) {
+			*val = bmg160_samp_freq_table[i].odr;
+			return IIO_VAL_INT;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int bmg160_set_scale(struct bmg160_data *data, int val)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret, i;
+
+	for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
+		if (bmg160_scale_table[i].scale == val) {
+			ret = regmap_write(data->regmap, BMG160_REG_RANGE,
+					   bmg160_scale_table[i].dps_range);
+			if (ret < 0) {
+				dev_err(dev, "Error writing reg_range\n");
+				return ret;
+			}
+			data->dps_range = bmg160_scale_table[i].dps_range;
+			return 0;
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int bmg160_get_temp(struct bmg160_data *data, int *val)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	unsigned int raw_val;
+
+	mutex_lock(&data->mutex);
+	ret = bmg160_set_power_state(data, true);
+	if (ret < 0) {
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+
+	ret = regmap_read(data->regmap, BMG160_REG_TEMP, &raw_val);
+	if (ret < 0) {
+		dev_err(dev, "Error reading reg_temp\n");
+		bmg160_set_power_state(data, false);
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+
+	*val = sign_extend32(raw_val, 7);
+	ret = bmg160_set_power_state(data, false);
+	mutex_unlock(&data->mutex);
+	if (ret < 0)
+		return ret;
+
+	return IIO_VAL_INT;
+}
+
+static int bmg160_get_axis(struct bmg160_data *data, int axis, int *val)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	__le16 raw_val;
+
+	mutex_lock(&data->mutex);
+	ret = bmg160_set_power_state(data, true);
+	if (ret < 0) {
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+
+	ret = regmap_bulk_read(data->regmap, BMG160_AXIS_TO_REG(axis), &raw_val,
+			       sizeof(raw_val));
+	if (ret < 0) {
+		dev_err(dev, "Error reading axis %d\n", axis);
+		bmg160_set_power_state(data, false);
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+
+	*val = sign_extend32(le16_to_cpu(raw_val), 15);
+	ret = bmg160_set_power_state(data, false);
+	mutex_unlock(&data->mutex);
+	if (ret < 0)
+		return ret;
+
+	return IIO_VAL_INT;
+}
+
+static int bmg160_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val, int *val2, long mask)
+{
+	struct bmg160_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_TEMP:
+			return bmg160_get_temp(data, val);
+		case IIO_ANGL_VEL:
+			if (iio_buffer_enabled(indio_dev))
+				return -EBUSY;
+			else
+				return bmg160_get_axis(data, chan->scan_index,
+						       val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_OFFSET:
+		if (chan->type == IIO_TEMP) {
+			*val = BMG160_TEMP_CENTER_VAL;
+			return IIO_VAL_INT;
+		} else
+			return -EINVAL;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		return bmg160_get_filter(data, val);
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			*val = 500;
+			return IIO_VAL_INT;
+		case IIO_ANGL_VEL:
+		{
+			int i;
+
+			for (i = 0; i < ARRAY_SIZE(bmg160_scale_table); ++i) {
+				if (bmg160_scale_table[i].dps_range ==
+							data->dps_range) {
+					*val = 0;
+					*val2 = bmg160_scale_table[i].scale;
+					return IIO_VAL_INT_PLUS_MICRO;
+				}
+			}
+			return -EINVAL;
+		}
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val2 = 0;
+		mutex_lock(&data->mutex);
+		ret = bmg160_get_bw(data, val);
+		mutex_unlock(&data->mutex);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int bmg160_write_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int val, int val2, long mask)
+{
+	struct bmg160_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		mutex_lock(&data->mutex);
+		/*
+		 * Section 4.2 of spec
+		 * In suspend mode, the only supported operations are reading
+		 * registers as well as writing to the (0x14) softreset
+		 * register. Since we will be in suspend mode by default, change
+		 * mode to power on for other writes.
+		 */
+		ret = bmg160_set_power_state(data, true);
+		if (ret < 0) {
+			mutex_unlock(&data->mutex);
+			return ret;
+		}
+		ret = bmg160_set_bw(data, val);
+		if (ret < 0) {
+			bmg160_set_power_state(data, false);
+			mutex_unlock(&data->mutex);
+			return ret;
+		}
+		ret = bmg160_set_power_state(data, false);
+		mutex_unlock(&data->mutex);
+		return ret;
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		if (val2)
+			return -EINVAL;
+
+		mutex_lock(&data->mutex);
+		ret = bmg160_set_power_state(data, true);
+		if (ret < 0) {
+			bmg160_set_power_state(data, false);
+			mutex_unlock(&data->mutex);
+			return ret;
+		}
+		ret = bmg160_set_filter(data, val);
+		if (ret < 0) {
+			bmg160_set_power_state(data, false);
+			mutex_unlock(&data->mutex);
+			return ret;
+		}
+		ret = bmg160_set_power_state(data, false);
+		mutex_unlock(&data->mutex);
+		return ret;
+	case IIO_CHAN_INFO_SCALE:
+		if (val)
+			return -EINVAL;
+
+		mutex_lock(&data->mutex);
+		/* Refer to comments above for the suspend mode ops */
+		ret = bmg160_set_power_state(data, true);
+		if (ret < 0) {
+			mutex_unlock(&data->mutex);
+			return ret;
+		}
+		ret = bmg160_set_scale(data, val2);
+		if (ret < 0) {
+			bmg160_set_power_state(data, false);
+			mutex_unlock(&data->mutex);
+			return ret;
+		}
+		ret = bmg160_set_power_state(data, false);
+		mutex_unlock(&data->mutex);
+		return ret;
+	default:
+		return -EINVAL;
+	}
+
+	return -EINVAL;
+}
+
+static int bmg160_read_event(struct iio_dev *indio_dev,
+			     const struct iio_chan_spec *chan,
+			     enum iio_event_type type,
+			     enum iio_event_direction dir,
+			     enum iio_event_info info,
+			     int *val, int *val2)
+{
+	struct bmg160_data *data = iio_priv(indio_dev);
+
+	*val2 = 0;
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		*val = data->slope_thres & BMG160_SLOPE_THRES_MASK;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return IIO_VAL_INT;
+}
+
+static int bmg160_write_event(struct iio_dev *indio_dev,
+			      const struct iio_chan_spec *chan,
+			      enum iio_event_type type,
+			      enum iio_event_direction dir,
+			      enum iio_event_info info,
+			      int val, int val2)
+{
+	struct bmg160_data *data = iio_priv(indio_dev);
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		if (data->ev_enable_state)
+			return -EBUSY;
+		data->slope_thres &= ~BMG160_SLOPE_THRES_MASK;
+		data->slope_thres |= (val & BMG160_SLOPE_THRES_MASK);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bmg160_read_event_config(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir)
+{
+
+	struct bmg160_data *data = iio_priv(indio_dev);
+
+	return data->ev_enable_state;
+}
+
+static int bmg160_write_event_config(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir,
+				     int state)
+{
+	struct bmg160_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (state && data->ev_enable_state)
+		return 0;
+
+	mutex_lock(&data->mutex);
+
+	if (!state && data->motion_trigger_on) {
+		data->ev_enable_state = 0;
+		mutex_unlock(&data->mutex);
+		return 0;
+	}
+	/*
+	 * We will expect the enable and disable to do operation
+	 * in reverse order. This will happen here anyway as our
+	 * resume operation uses sync mode runtime pm calls, the
+	 * suspend operation will be delayed by autosuspend delay
+	 * So the disable operation will still happen in reverse of
+	 * enable operation. When runtime pm is disabled the mode
+	 * is always on so sequence doesn't matter
+	 */
+	ret = bmg160_set_power_state(data, state);
+	if (ret < 0) {
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+
+	ret =  bmg160_setup_any_motion_interrupt(data, state);
+	if (ret < 0) {
+		bmg160_set_power_state(data, false);
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+
+	data->ev_enable_state = state;
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static const struct iio_mount_matrix *
+bmg160_get_mount_matrix(const struct iio_dev *indio_dev,
+			 const struct iio_chan_spec *chan)
+{
+	struct bmg160_data *data = iio_priv(indio_dev);
+
+	return &data->orientation;
+}
+
+static const struct iio_chan_spec_ext_info bmg160_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bmg160_get_mount_matrix),
+	{ }
+};
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("100 200 400 1000 2000");
+
+static IIO_CONST_ATTR(in_anglvel_scale_available,
+		      "0.001065 0.000532 0.000266 0.000133 0.000066");
+
+static struct attribute *bmg160_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_anglvel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group bmg160_attrs_group = {
+	.attrs = bmg160_attributes,
+};
+
+static const struct iio_event_spec bmg160_event = {
+		.type = IIO_EV_TYPE_ROC,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
+				       BIT(IIO_EV_INFO_ENABLE)
+};
+
+#define BMG160_CHANNEL(_axis) {					\
+	.type = IIO_ANGL_VEL,						\
+	.modified = 1,							\
+	.channel2 = IIO_MOD_##_axis,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |				\
+		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),	\
+	.scan_index = AXIS_##_axis,					\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = 16,					\
+		.storagebits = 16,					\
+		.endianness = IIO_LE,					\
+	},								\
+	.ext_info = bmg160_ext_info,					\
+	.event_spec = &bmg160_event,					\
+	.num_event_specs = 1						\
+}
+
+static const struct iio_chan_spec bmg160_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OFFSET),
+		.scan_index = -1,
+	},
+	BMG160_CHANNEL(X),
+	BMG160_CHANNEL(Y),
+	BMG160_CHANNEL(Z),
+	IIO_CHAN_SOFT_TIMESTAMP(3),
+};
+
+static const struct iio_info bmg160_info = {
+	.attrs			= &bmg160_attrs_group,
+	.read_raw		= bmg160_read_raw,
+	.write_raw		= bmg160_write_raw,
+	.read_event_value	= bmg160_read_event,
+	.write_event_value	= bmg160_write_event,
+	.write_event_config	= bmg160_write_event_config,
+	.read_event_config	= bmg160_read_event_config,
+};
+
+static const unsigned long bmg160_accel_scan_masks[] = {
+					BIT(AXIS_X) | BIT(AXIS_Y) | BIT(AXIS_Z),
+					0};
+
+static irqreturn_t bmg160_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct bmg160_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_bulk_read(data->regmap, BMG160_REG_XOUT_L,
+			       data->scan.chans, AXIS_MAX * 2);
+	mutex_unlock(&data->mutex);
+	if (ret < 0)
+		goto err;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
+					   pf->timestamp);
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static void bmg160_trig_reen(struct iio_trigger *trig)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct bmg160_data *data = iio_priv(indio_dev);
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+
+	/* new data interrupts don't need ack */
+	if (data->dready_trigger_on)
+		return;
+
+	/* Set latched mode interrupt and clear any latched interrupt */
+	ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
+			   BMG160_INT_MODE_LATCH_INT |
+			   BMG160_INT_MODE_LATCH_RESET);
+	if (ret < 0)
+		dev_err(dev, "Error writing reg_rst_latch\n");
+}
+
+static int bmg160_data_rdy_trigger_set_state(struct iio_trigger *trig,
+					     bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct bmg160_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	if (!state && data->ev_enable_state && data->motion_trigger_on) {
+		data->motion_trigger_on = false;
+		mutex_unlock(&data->mutex);
+		return 0;
+	}
+
+	/*
+	 * Refer to comment in bmg160_write_event_config for
+	 * enable/disable operation order
+	 */
+	ret = bmg160_set_power_state(data, state);
+	if (ret < 0) {
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+	if (data->motion_trig == trig)
+		ret =  bmg160_setup_any_motion_interrupt(data, state);
+	else
+		ret = bmg160_setup_new_data_interrupt(data, state);
+	if (ret < 0) {
+		bmg160_set_power_state(data, false);
+		mutex_unlock(&data->mutex);
+		return ret;
+	}
+	if (data->motion_trig == trig)
+		data->motion_trigger_on = state;
+	else
+		data->dready_trigger_on = state;
+
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static const struct iio_trigger_ops bmg160_trigger_ops = {
+	.set_trigger_state = bmg160_data_rdy_trigger_set_state,
+	.reenable = bmg160_trig_reen,
+};
+
+static irqreturn_t bmg160_event_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct bmg160_data *data = iio_priv(indio_dev);
+	struct device *dev = regmap_get_device(data->regmap);
+	int ret;
+	int dir;
+	unsigned int val;
+
+	ret = regmap_read(data->regmap, BMG160_REG_INT_STATUS_2, &val);
+	if (ret < 0) {
+		dev_err(dev, "Error reading reg_int_status2\n");
+		goto ack_intr_status;
+	}
+
+	if (val & 0x08)
+		dir = IIO_EV_DIR_RISING;
+	else
+		dir = IIO_EV_DIR_FALLING;
+
+	if (val & BMG160_ANY_MOTION_BIT_X)
+		iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
+							     0,
+							     IIO_MOD_X,
+							     IIO_EV_TYPE_ROC,
+							     dir),
+			       iio_get_time_ns(indio_dev));
+	if (val & BMG160_ANY_MOTION_BIT_Y)
+		iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
+							     0,
+							     IIO_MOD_Y,
+							     IIO_EV_TYPE_ROC,
+							     dir),
+			       iio_get_time_ns(indio_dev));
+	if (val & BMG160_ANY_MOTION_BIT_Z)
+		iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
+							     0,
+							     IIO_MOD_Z,
+							     IIO_EV_TYPE_ROC,
+							     dir),
+			       iio_get_time_ns(indio_dev));
+
+ack_intr_status:
+	if (!data->dready_trigger_on) {
+		ret = regmap_write(data->regmap, BMG160_REG_INT_RST_LATCH,
+				   BMG160_INT_MODE_LATCH_INT |
+				   BMG160_INT_MODE_LATCH_RESET);
+		if (ret < 0)
+			dev_err(dev, "Error writing reg_rst_latch\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t bmg160_data_rdy_trig_poll(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct bmg160_data *data = iio_priv(indio_dev);
+
+	if (data->dready_trigger_on)
+		iio_trigger_poll(data->dready_trig);
+	else if (data->motion_trigger_on)
+		iio_trigger_poll(data->motion_trig);
+
+	if (data->ev_enable_state)
+		return IRQ_WAKE_THREAD;
+	else
+		return IRQ_HANDLED;
+
+}
+
+static int bmg160_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct bmg160_data *data = iio_priv(indio_dev);
+
+	return bmg160_set_power_state(data, true);
+}
+
+static int bmg160_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct bmg160_data *data = iio_priv(indio_dev);
+
+	return bmg160_set_power_state(data, false);
+}
+
+static const struct iio_buffer_setup_ops bmg160_buffer_setup_ops = {
+	.preenable = bmg160_buffer_preenable,
+	.postdisable = bmg160_buffer_postdisable,
+};
+
+static const char *bmg160_match_acpi_device(struct device *dev)
+{
+	const struct acpi_device_id *id;
+
+	id = acpi_match_device(dev->driver->acpi_match_table, dev);
+	if (!id)
+		return NULL;
+
+	return dev_name(dev);
+}
+
+static void bmg160_disable_regulators(void *d)
+{
+	struct bmg160_data *data = d;
+
+	regulator_bulk_disable(ARRAY_SIZE(data->regulators), data->regulators);
+}
+
+int bmg160_core_probe(struct device *dev, struct regmap *regmap, int irq,
+		      const char *name)
+{
+	struct bmg160_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	dev_set_drvdata(dev, indio_dev);
+	data->irq = irq;
+	data->regmap = regmap;
+
+	data->regulators[0].supply = "vdd";
+	data->regulators[1].supply = "vddio";
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->regulators),
+				      data->regulators);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to get regulators\n");
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(data->regulators),
+				    data->regulators);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, bmg160_disable_regulators, data);
+	if (ret)
+		return ret;
+
+	ret = iio_read_mount_matrix(dev, &data->orientation);
+	if (ret)
+		return ret;
+
+	ret = bmg160_chip_init(data);
+	if (ret < 0)
+		return ret;
+
+	mutex_init(&data->mutex);
+
+	if (ACPI_HANDLE(dev))
+		name = bmg160_match_acpi_device(dev);
+
+	indio_dev->channels = bmg160_channels;
+	indio_dev->num_channels = ARRAY_SIZE(bmg160_channels);
+	indio_dev->name = name;
+	indio_dev->available_scan_masks = bmg160_accel_scan_masks;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &bmg160_info;
+
+	if (data->irq > 0) {
+		ret = devm_request_threaded_irq(dev,
+						data->irq,
+						bmg160_data_rdy_trig_poll,
+						bmg160_event_handler,
+						IRQF_TRIGGER_RISING,
+						BMG160_IRQ_NAME,
+						indio_dev);
+		if (ret)
+			return ret;
+
+		data->dready_trig = devm_iio_trigger_alloc(dev,
+							   "%s-dev%d",
+							   indio_dev->name,
+							   iio_device_id(indio_dev));
+		if (!data->dready_trig)
+			return -ENOMEM;
+
+		data->motion_trig = devm_iio_trigger_alloc(dev,
+							  "%s-any-motion-dev%d",
+							  indio_dev->name,
+							  iio_device_id(indio_dev));
+		if (!data->motion_trig)
+			return -ENOMEM;
+
+		data->dready_trig->ops = &bmg160_trigger_ops;
+		iio_trigger_set_drvdata(data->dready_trig, indio_dev);
+		ret = iio_trigger_register(data->dready_trig);
+		if (ret)
+			return ret;
+
+		data->motion_trig->ops = &bmg160_trigger_ops;
+		iio_trigger_set_drvdata(data->motion_trig, indio_dev);
+		ret = iio_trigger_register(data->motion_trig);
+		if (ret) {
+			data->motion_trig = NULL;
+			goto err_trigger_unregister;
+		}
+	}
+
+	ret = iio_triggered_buffer_setup(indio_dev,
+					 iio_pollfunc_store_time,
+					 bmg160_trigger_handler,
+					 &bmg160_buffer_setup_ops);
+	if (ret < 0) {
+		dev_err(dev,
+			"iio triggered buffer setup failed\n");
+		goto err_trigger_unregister;
+	}
+
+	ret = pm_runtime_set_active(dev);
+	if (ret)
+		goto err_buffer_cleanup;
+
+	pm_runtime_enable(dev);
+	pm_runtime_set_autosuspend_delay(dev,
+					 BMG160_AUTO_SUSPEND_DELAY_MS);
+	pm_runtime_use_autosuspend(dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(dev, "unable to register iio device\n");
+		goto err_pm_cleanup;
+	}
+
+	return 0;
+
+err_pm_cleanup:
+	pm_runtime_dont_use_autosuspend(dev);
+	pm_runtime_disable(dev);
+err_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+err_trigger_unregister:
+	if (data->dready_trig)
+		iio_trigger_unregister(data->dready_trig);
+	if (data->motion_trig)
+		iio_trigger_unregister(data->motion_trig);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(bmg160_core_probe);
+
+void bmg160_core_remove(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct bmg160_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+	pm_runtime_put_noidle(dev);
+
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	if (data->dready_trig) {
+		iio_trigger_unregister(data->dready_trig);
+		iio_trigger_unregister(data->motion_trig);
+	}
+
+	mutex_lock(&data->mutex);
+	bmg160_set_mode(data, BMG160_MODE_DEEP_SUSPEND);
+	mutex_unlock(&data->mutex);
+}
+EXPORT_SYMBOL_GPL(bmg160_core_remove);
+
+#ifdef CONFIG_PM_SLEEP
+static int bmg160_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct bmg160_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->mutex);
+	bmg160_set_mode(data, BMG160_MODE_SUSPEND);
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static int bmg160_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct bmg160_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->mutex);
+	if (data->dready_trigger_on || data->motion_trigger_on ||
+							data->ev_enable_state)
+		bmg160_set_mode(data, BMG160_MODE_NORMAL);
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_PM
+static int bmg160_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct bmg160_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND);
+	if (ret < 0) {
+		dev_err(dev, "set mode failed\n");
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+
+static int bmg160_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct bmg160_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = bmg160_set_mode(data, BMG160_MODE_NORMAL);
+	if (ret < 0)
+		return ret;
+
+	msleep_interruptible(BMG160_MAX_STARTUP_TIME_MS);
+
+	return 0;
+}
+#endif
+
+const struct dev_pm_ops bmg160_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(bmg160_suspend, bmg160_resume)
+	SET_RUNTIME_PM_OPS(bmg160_runtime_suspend,
+			   bmg160_runtime_resume, NULL)
+};
+EXPORT_SYMBOL_GPL(bmg160_pm_ops);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("BMG160 Gyro driver");
diff --git a/drivers/iio/gyro/bmg160_i2c.c b/drivers/iio/gyro/bmg160_i2c.c
new file mode 100644
index 000000000..908ccc385
--- /dev/null
+++ b/drivers/iio/gyro/bmg160_i2c.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/acpi.h>
+
+#include "bmg160.h"
+
+static const struct regmap_config bmg160_regmap_i2c_conf = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x3f
+};
+
+static int bmg160_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	const char *name = NULL;
+
+	regmap = devm_regmap_init_i2c(client, &bmg160_regmap_i2c_conf);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+			regmap);
+		return PTR_ERR(regmap);
+	}
+
+	if (id)
+		name = id->name;
+
+	return bmg160_core_probe(&client->dev, regmap, client->irq, name);
+}
+
+static void bmg160_i2c_remove(struct i2c_client *client)
+{
+	bmg160_core_remove(&client->dev);
+}
+
+static const struct acpi_device_id bmg160_acpi_match[] = {
+	{"BMG0160", 0},
+	{"BMI055B", 0},
+	{"BMI088B", 0},
+	{},
+};
+
+MODULE_DEVICE_TABLE(acpi, bmg160_acpi_match);
+
+static const struct i2c_device_id bmg160_i2c_id[] = {
+	{"bmg160", 0},
+	{"bmi055_gyro", 0},
+	{"bmi088_gyro", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, bmg160_i2c_id);
+
+static const struct of_device_id bmg160_of_match[] = {
+	{ .compatible = "bosch,bmg160" },
+	{ .compatible = "bosch,bmi055_gyro" },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(of, bmg160_of_match);
+
+static struct i2c_driver bmg160_i2c_driver = {
+	.driver = {
+		.name	= "bmg160_i2c",
+		.acpi_match_table = ACPI_PTR(bmg160_acpi_match),
+		.of_match_table = bmg160_of_match,
+		.pm	= &bmg160_pm_ops,
+	},
+	.probe		= bmg160_i2c_probe,
+	.remove		= bmg160_i2c_remove,
+	.id_table	= bmg160_i2c_id,
+};
+module_i2c_driver(bmg160_i2c_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("BMG160 I2C Gyro driver");
diff --git a/drivers/iio/gyro/bmg160_spi.c b/drivers/iio/gyro/bmg160_spi.c
new file mode 100644
index 000000000..fc2e45352
--- /dev/null
+++ b/drivers/iio/gyro/bmg160_spi.c
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+
+#include "bmg160.h"
+
+static const struct regmap_config bmg160_regmap_spi_conf = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x3f,
+};
+
+static int bmg160_spi_probe(struct spi_device *spi)
+{
+	struct regmap *regmap;
+	const struct spi_device_id *id = spi_get_device_id(spi);
+
+	regmap = devm_regmap_init_spi(spi, &bmg160_regmap_spi_conf);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "Failed to register spi regmap: %pe\n",
+			regmap);
+		return PTR_ERR(regmap);
+	}
+
+	return bmg160_core_probe(&spi->dev, regmap, spi->irq, id->name);
+}
+
+static void bmg160_spi_remove(struct spi_device *spi)
+{
+	bmg160_core_remove(&spi->dev);
+}
+
+static const struct spi_device_id bmg160_spi_id[] = {
+	{"bmg160", 0},
+	{"bmi055_gyro", 0},
+	{"bmi088_gyro", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(spi, bmg160_spi_id);
+
+static struct spi_driver bmg160_spi_driver = {
+	.driver = {
+		.name	= "bmg160_spi",
+		.pm	= &bmg160_pm_ops,
+	},
+	.probe		= bmg160_spi_probe,
+	.remove		= bmg160_spi_remove,
+	.id_table	= bmg160_spi_id,
+};
+module_spi_driver(bmg160_spi_driver);
+
+MODULE_AUTHOR("Markus Pargmann <mpa@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("BMG160 SPI Gyro driver");
diff --git a/drivers/iio/gyro/fxas21002c.h b/drivers/iio/gyro/fxas21002c.h
new file mode 100644
index 000000000..c81cecee1
--- /dev/null
+++ b/drivers/iio/gyro/fxas21002c.h
@@ -0,0 +1,84 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Driver for NXP FXAS21002C Gyroscope - Header
+ *
+ * Copyright (C) 2019 Linaro Ltd.
+ */
+
+#ifndef FXAS21002C_H_
+#define FXAS21002C_H_
+
+#include <linux/regmap.h>
+
+#define FXAS21002C_REG_STATUS		0x00
+#define FXAS21002C_REG_OUT_X_MSB	0x01
+#define FXAS21002C_REG_OUT_X_LSB	0x02
+#define FXAS21002C_REG_OUT_Y_MSB	0x03
+#define FXAS21002C_REG_OUT_Y_LSB	0x04
+#define FXAS21002C_REG_OUT_Z_MSB	0x05
+#define FXAS21002C_REG_OUT_Z_LSB	0x06
+#define FXAS21002C_REG_DR_STATUS	0x07
+#define FXAS21002C_REG_F_STATUS		0x08
+#define FXAS21002C_REG_F_SETUP		0x09
+#define FXAS21002C_REG_F_EVENT		0x0A
+#define FXAS21002C_REG_INT_SRC_FLAG	0x0B
+#define FXAS21002C_REG_WHO_AM_I		0x0C
+#define FXAS21002C_REG_CTRL0		0x0D
+#define FXAS21002C_REG_RT_CFG		0x0E
+#define FXAS21002C_REG_RT_SRC		0x0F
+#define FXAS21002C_REG_RT_THS		0x10
+#define FXAS21002C_REG_RT_COUNT		0x11
+#define FXAS21002C_REG_TEMP		0x12
+#define FXAS21002C_REG_CTRL1		0x13
+#define FXAS21002C_REG_CTRL2		0x14
+#define FXAS21002C_REG_CTRL3		0x15
+
+enum fxas21002c_fields {
+	F_DR_STATUS,
+	F_OUT_X_MSB,
+	F_OUT_X_LSB,
+	F_OUT_Y_MSB,
+	F_OUT_Y_LSB,
+	F_OUT_Z_MSB,
+	F_OUT_Z_LSB,
+	/* DR_STATUS */
+	F_ZYX_OW, F_Z_OW, F_Y_OW, F_X_OW, F_ZYX_DR, F_Z_DR, F_Y_DR, F_X_DR,
+	/* F_STATUS */
+	F_OVF, F_WMKF, F_CNT,
+	/* F_SETUP */
+	F_MODE, F_WMRK,
+	/* F_EVENT */
+	F_EVENT, FE_TIME,
+	/* INT_SOURCE_FLAG */
+	F_BOOTEND, F_SRC_FIFO, F_SRC_RT, F_SRC_DRDY,
+	/* WHO_AM_I */
+	F_WHO_AM_I,
+	/* CTRL_REG0 */
+	F_BW, F_SPIW, F_SEL, F_HPF_EN, F_FS,
+	/* RT_CFG */
+	F_ELE, F_ZTEFE, F_YTEFE, F_XTEFE,
+	/* RT_SRC */
+	F_EA, F_ZRT, F_ZRT_POL, F_YRT, F_YRT_POL, F_XRT, F_XRT_POL,
+	/* RT_THS */
+	F_DBCNTM, F_THS,
+	/* RT_COUNT */
+	F_RT_COUNT,
+	/* TEMP */
+	F_TEMP,
+	/* CTRL_REG1 */
+	F_RST, F_ST, F_DR, F_ACTIVE, F_READY,
+	/* CTRL_REG2 */
+	F_INT_CFG_FIFO, F_INT_EN_FIFO, F_INT_CFG_RT, F_INT_EN_RT,
+	F_INT_CFG_DRDY, F_INT_EN_DRDY, F_IPOL, F_PP_OD,
+	/* CTRL_REG3 */
+	F_WRAPTOONE, F_EXTCTRLEN, F_FS_DOUBLE,
+	/* MAX FIELDS */
+	F_MAX_FIELDS,
+};
+
+extern const struct dev_pm_ops fxas21002c_pm_ops;
+
+int fxas21002c_core_probe(struct device *dev, struct regmap *regmap, int irq,
+			  const char *name);
+void fxas21002c_core_remove(struct device *dev);
+#endif
diff --git a/drivers/iio/gyro/fxas21002c_core.c b/drivers/iio/gyro/fxas21002c_core.c
new file mode 100644
index 000000000..a36d71d9e
--- /dev/null
+++ b/drivers/iio/gyro/fxas21002c_core.c
@@ -0,0 +1,1059 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for NXP FXAS21002C Gyroscope - Core
+ *
+ * Copyright (C) 2019 Linaro Ltd.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include "fxas21002c.h"
+
+#define FXAS21002C_CHIP_ID_1	0xD6
+#define FXAS21002C_CHIP_ID_2	0xD7
+
+enum fxas21002c_mode_state {
+	FXAS21002C_MODE_STANDBY,
+	FXAS21002C_MODE_READY,
+	FXAS21002C_MODE_ACTIVE,
+};
+
+#define FXAS21002C_STANDBY_ACTIVE_TIME_MS	62
+#define FXAS21002C_READY_ACTIVE_TIME_MS		7
+
+#define FXAS21002C_ODR_LIST_MAX		10
+
+#define FXAS21002C_SCALE_FRACTIONAL	32
+#define FXAS21002C_RANGE_LIMIT_DOUBLE	2000
+
+#define FXAS21002C_AXIS_TO_REG(axis) (FXAS21002C_REG_OUT_X_MSB + ((axis) * 2))
+
+static const struct reg_field fxas21002c_reg_fields[] = {
+	[F_DR_STATUS]		= REG_FIELD(FXAS21002C_REG_STATUS, 0, 7),
+	[F_OUT_X_MSB]		= REG_FIELD(FXAS21002C_REG_OUT_X_MSB, 0, 7),
+	[F_OUT_X_LSB]		= REG_FIELD(FXAS21002C_REG_OUT_X_LSB, 0, 7),
+	[F_OUT_Y_MSB]		= REG_FIELD(FXAS21002C_REG_OUT_Y_MSB, 0, 7),
+	[F_OUT_Y_LSB]		= REG_FIELD(FXAS21002C_REG_OUT_Y_LSB, 0, 7),
+	[F_OUT_Z_MSB]		= REG_FIELD(FXAS21002C_REG_OUT_Z_MSB, 0, 7),
+	[F_OUT_Z_LSB]		= REG_FIELD(FXAS21002C_REG_OUT_Z_LSB, 0, 7),
+	[F_ZYX_OW]		= REG_FIELD(FXAS21002C_REG_DR_STATUS, 7, 7),
+	[F_Z_OW]		= REG_FIELD(FXAS21002C_REG_DR_STATUS, 6, 6),
+	[F_Y_OW]		= REG_FIELD(FXAS21002C_REG_DR_STATUS, 5, 5),
+	[F_X_OW]		= REG_FIELD(FXAS21002C_REG_DR_STATUS, 4, 4),
+	[F_ZYX_DR]		= REG_FIELD(FXAS21002C_REG_DR_STATUS, 3, 3),
+	[F_Z_DR]		= REG_FIELD(FXAS21002C_REG_DR_STATUS, 2, 2),
+	[F_Y_DR]		= REG_FIELD(FXAS21002C_REG_DR_STATUS, 1, 1),
+	[F_X_DR]		= REG_FIELD(FXAS21002C_REG_DR_STATUS, 0, 0),
+	[F_OVF]			= REG_FIELD(FXAS21002C_REG_F_STATUS, 7, 7),
+	[F_WMKF]		= REG_FIELD(FXAS21002C_REG_F_STATUS, 6, 6),
+	[F_CNT]			= REG_FIELD(FXAS21002C_REG_F_STATUS, 0, 5),
+	[F_MODE]		= REG_FIELD(FXAS21002C_REG_F_SETUP, 6, 7),
+	[F_WMRK]		= REG_FIELD(FXAS21002C_REG_F_SETUP, 0, 5),
+	[F_EVENT]		= REG_FIELD(FXAS21002C_REG_F_EVENT, 5, 5),
+	[FE_TIME]		= REG_FIELD(FXAS21002C_REG_F_EVENT, 0, 4),
+	[F_BOOTEND]		= REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 3, 3),
+	[F_SRC_FIFO]		= REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 2, 2),
+	[F_SRC_RT]		= REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 1, 1),
+	[F_SRC_DRDY]		= REG_FIELD(FXAS21002C_REG_INT_SRC_FLAG, 0, 0),
+	[F_WHO_AM_I]		= REG_FIELD(FXAS21002C_REG_WHO_AM_I, 0, 7),
+	[F_BW]			= REG_FIELD(FXAS21002C_REG_CTRL0, 6, 7),
+	[F_SPIW]		= REG_FIELD(FXAS21002C_REG_CTRL0, 5, 5),
+	[F_SEL]			= REG_FIELD(FXAS21002C_REG_CTRL0, 3, 4),
+	[F_HPF_EN]		= REG_FIELD(FXAS21002C_REG_CTRL0, 2, 2),
+	[F_FS]			= REG_FIELD(FXAS21002C_REG_CTRL0, 0, 1),
+	[F_ELE]			= REG_FIELD(FXAS21002C_REG_RT_CFG, 3, 3),
+	[F_ZTEFE]		= REG_FIELD(FXAS21002C_REG_RT_CFG, 2, 2),
+	[F_YTEFE]		= REG_FIELD(FXAS21002C_REG_RT_CFG, 1, 1),
+	[F_XTEFE]		= REG_FIELD(FXAS21002C_REG_RT_CFG, 0, 0),
+	[F_EA]			= REG_FIELD(FXAS21002C_REG_RT_SRC, 6, 6),
+	[F_ZRT]			= REG_FIELD(FXAS21002C_REG_RT_SRC, 5, 5),
+	[F_ZRT_POL]		= REG_FIELD(FXAS21002C_REG_RT_SRC, 4, 4),
+	[F_YRT]			= REG_FIELD(FXAS21002C_REG_RT_SRC, 3, 3),
+	[F_YRT_POL]		= REG_FIELD(FXAS21002C_REG_RT_SRC, 2, 2),
+	[F_XRT]			= REG_FIELD(FXAS21002C_REG_RT_SRC, 1, 1),
+	[F_XRT_POL]		= REG_FIELD(FXAS21002C_REG_RT_SRC, 0, 0),
+	[F_DBCNTM]		= REG_FIELD(FXAS21002C_REG_RT_THS, 7, 7),
+	[F_THS]			= REG_FIELD(FXAS21002C_REG_RT_SRC, 0, 6),
+	[F_RT_COUNT]		= REG_FIELD(FXAS21002C_REG_RT_COUNT, 0, 7),
+	[F_TEMP]		= REG_FIELD(FXAS21002C_REG_TEMP, 0, 7),
+	[F_RST]			= REG_FIELD(FXAS21002C_REG_CTRL1, 6, 6),
+	[F_ST]			= REG_FIELD(FXAS21002C_REG_CTRL1, 5, 5),
+	[F_DR]			= REG_FIELD(FXAS21002C_REG_CTRL1, 2, 4),
+	[F_ACTIVE]		= REG_FIELD(FXAS21002C_REG_CTRL1, 1, 1),
+	[F_READY]		= REG_FIELD(FXAS21002C_REG_CTRL1, 0, 0),
+	[F_INT_CFG_FIFO]	= REG_FIELD(FXAS21002C_REG_CTRL2, 7, 7),
+	[F_INT_EN_FIFO]		= REG_FIELD(FXAS21002C_REG_CTRL2, 6, 6),
+	[F_INT_CFG_RT]		= REG_FIELD(FXAS21002C_REG_CTRL2, 5, 5),
+	[F_INT_EN_RT]		= REG_FIELD(FXAS21002C_REG_CTRL2, 4, 4),
+	[F_INT_CFG_DRDY]	= REG_FIELD(FXAS21002C_REG_CTRL2, 3, 3),
+	[F_INT_EN_DRDY]		= REG_FIELD(FXAS21002C_REG_CTRL2, 2, 2),
+	[F_IPOL]		= REG_FIELD(FXAS21002C_REG_CTRL2, 1, 1),
+	[F_PP_OD]		= REG_FIELD(FXAS21002C_REG_CTRL2, 0, 0),
+	[F_WRAPTOONE]		= REG_FIELD(FXAS21002C_REG_CTRL3, 3, 3),
+	[F_EXTCTRLEN]		= REG_FIELD(FXAS21002C_REG_CTRL3, 2, 2),
+	[F_FS_DOUBLE]		= REG_FIELD(FXAS21002C_REG_CTRL3, 0, 0),
+};
+
+static const int fxas21002c_odr_values[] = {
+	800, 400, 200, 100, 50, 25, 12, 12
+};
+
+/*
+ * These values are taken from the low-pass filter cutoff frequency calculated
+ * ODR * 0.lpf_values. So, for ODR = 800Hz with a lpf value = 0.32
+ * => LPF cutoff frequency = 800 * 0.32 = 256 Hz
+ */
+static const int fxas21002c_lpf_values[] = {
+	32, 16, 8
+};
+
+/*
+ * These values are taken from the high-pass filter cutoff frequency calculated
+ * ODR * 0.0hpf_values. So, for ODR = 800Hz with a hpf value = 0.018750
+ * => HPF cutoff frequency = 800 * 0.018750 = 15 Hz
+ */
+static const int fxas21002c_hpf_values[] = {
+	18750, 9625, 4875, 2475
+};
+
+static const int fxas21002c_range_values[] = {
+	4000, 2000, 1000, 500, 250
+};
+
+struct fxas21002c_data {
+	u8 chip_id;
+	enum fxas21002c_mode_state mode;
+	enum fxas21002c_mode_state prev_mode;
+
+	struct mutex lock;		/* serialize data access */
+	struct regmap *regmap;
+	struct regmap_field *regmap_fields[F_MAX_FIELDS];
+	struct iio_trigger *dready_trig;
+	s64 timestamp;
+	int irq;
+
+	struct regulator *vdd;
+	struct regulator *vddio;
+
+	/*
+	 * DMA (thus cache coherency maintenance) may require the
+	 * transfer buffers live in their own cache lines.
+	 */
+	s16 buffer[8] __aligned(IIO_DMA_MINALIGN);
+};
+
+enum fxas21002c_channel_index {
+	CHANNEL_SCAN_INDEX_X,
+	CHANNEL_SCAN_INDEX_Y,
+	CHANNEL_SCAN_INDEX_Z,
+	CHANNEL_SCAN_MAX,
+};
+
+static int fxas21002c_odr_hz_from_value(struct fxas21002c_data *data, u8 value)
+{
+	int odr_value_max = ARRAY_SIZE(fxas21002c_odr_values) - 1;
+
+	value = min_t(u8, value, odr_value_max);
+
+	return fxas21002c_odr_values[value];
+}
+
+static int fxas21002c_odr_value_from_hz(struct fxas21002c_data *data,
+					unsigned int hz)
+{
+	int odr_table_size = ARRAY_SIZE(fxas21002c_odr_values);
+	int i;
+
+	for (i = 0; i < odr_table_size; i++)
+		if (fxas21002c_odr_values[i] == hz)
+			return i;
+
+	return -EINVAL;
+}
+
+static int fxas21002c_lpf_bw_from_value(struct fxas21002c_data *data, u8 value)
+{
+	int lpf_value_max = ARRAY_SIZE(fxas21002c_lpf_values) - 1;
+
+	value = min_t(u8, value, lpf_value_max);
+
+	return fxas21002c_lpf_values[value];
+}
+
+static int fxas21002c_lpf_value_from_bw(struct fxas21002c_data *data,
+					unsigned int hz)
+{
+	int lpf_table_size = ARRAY_SIZE(fxas21002c_lpf_values);
+	int i;
+
+	for (i = 0; i < lpf_table_size; i++)
+		if (fxas21002c_lpf_values[i] == hz)
+			return i;
+
+	return -EINVAL;
+}
+
+static int fxas21002c_hpf_sel_from_value(struct fxas21002c_data *data, u8 value)
+{
+	int hpf_value_max = ARRAY_SIZE(fxas21002c_hpf_values) - 1;
+
+	value = min_t(u8, value, hpf_value_max);
+
+	return fxas21002c_hpf_values[value];
+}
+
+static int fxas21002c_hpf_value_from_sel(struct fxas21002c_data *data,
+					 unsigned int hz)
+{
+	int hpf_table_size = ARRAY_SIZE(fxas21002c_hpf_values);
+	int i;
+
+	for (i = 0; i < hpf_table_size; i++)
+		if (fxas21002c_hpf_values[i] == hz)
+			return i;
+
+	return -EINVAL;
+}
+
+static int fxas21002c_range_fs_from_value(struct fxas21002c_data *data,
+					  u8 value)
+{
+	int range_value_max = ARRAY_SIZE(fxas21002c_range_values) - 1;
+	unsigned int fs_double;
+	int ret;
+
+	/* We need to check if FS_DOUBLE is enabled to offset the value */
+	ret = regmap_field_read(data->regmap_fields[F_FS_DOUBLE], &fs_double);
+	if (ret < 0)
+		return ret;
+
+	if (!fs_double)
+		value += 1;
+
+	value = min_t(u8, value, range_value_max);
+
+	return fxas21002c_range_values[value];
+}
+
+static int fxas21002c_range_value_from_fs(struct fxas21002c_data *data,
+					  unsigned int range)
+{
+	int range_table_size = ARRAY_SIZE(fxas21002c_range_values);
+	bool found = false;
+	int fs_double = 0;
+	int ret;
+	int i;
+
+	for (i = 0; i < range_table_size; i++)
+		if (fxas21002c_range_values[i] == range) {
+			found = true;
+			break;
+		}
+
+	if (!found)
+		return -EINVAL;
+
+	if (range > FXAS21002C_RANGE_LIMIT_DOUBLE)
+		fs_double = 1;
+
+	ret = regmap_field_write(data->regmap_fields[F_FS_DOUBLE], fs_double);
+	if (ret < 0)
+		return ret;
+
+	return i;
+}
+
+static int fxas21002c_mode_get(struct fxas21002c_data *data)
+{
+	unsigned int active;
+	unsigned int ready;
+	int ret;
+
+	ret = regmap_field_read(data->regmap_fields[F_ACTIVE], &active);
+	if (ret < 0)
+		return ret;
+	if (active)
+		return FXAS21002C_MODE_ACTIVE;
+
+	ret = regmap_field_read(data->regmap_fields[F_READY], &ready);
+	if (ret < 0)
+		return ret;
+	if (ready)
+		return FXAS21002C_MODE_READY;
+
+	return FXAS21002C_MODE_STANDBY;
+}
+
+static int fxas21002c_mode_set(struct fxas21002c_data *data,
+			       enum fxas21002c_mode_state mode)
+{
+	int ret;
+
+	if (mode == data->mode)
+		return 0;
+
+	if (mode == FXAS21002C_MODE_READY)
+		ret = regmap_field_write(data->regmap_fields[F_READY], 1);
+	else
+		ret = regmap_field_write(data->regmap_fields[F_READY], 0);
+	if (ret < 0)
+		return ret;
+
+	if (mode == FXAS21002C_MODE_ACTIVE)
+		ret = regmap_field_write(data->regmap_fields[F_ACTIVE], 1);
+	else
+		ret = regmap_field_write(data->regmap_fields[F_ACTIVE], 0);
+	if (ret < 0)
+		return ret;
+
+	/* if going to active wait the setup times */
+	if (mode == FXAS21002C_MODE_ACTIVE &&
+	    data->mode == FXAS21002C_MODE_STANDBY)
+		msleep_interruptible(FXAS21002C_STANDBY_ACTIVE_TIME_MS);
+
+	if (data->mode == FXAS21002C_MODE_READY)
+		msleep_interruptible(FXAS21002C_READY_ACTIVE_TIME_MS);
+
+	data->prev_mode = data->mode;
+	data->mode = mode;
+
+	return ret;
+}
+
+static int fxas21002c_write(struct fxas21002c_data *data,
+			    enum fxas21002c_fields field, int bits)
+{
+	int actual_mode;
+	int ret;
+
+	mutex_lock(&data->lock);
+
+	actual_mode = fxas21002c_mode_get(data);
+	if (actual_mode < 0) {
+		ret = actual_mode;
+		goto out_unlock;
+	}
+
+	ret = fxas21002c_mode_set(data, FXAS21002C_MODE_READY);
+	if (ret < 0)
+		goto out_unlock;
+
+	ret = regmap_field_write(data->regmap_fields[field], bits);
+	if (ret < 0)
+		goto out_unlock;
+
+	ret = fxas21002c_mode_set(data, data->prev_mode);
+
+out_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int  fxas21002c_pm_get(struct fxas21002c_data *data)
+{
+	return pm_runtime_resume_and_get(regmap_get_device(data->regmap));
+}
+
+static int  fxas21002c_pm_put(struct fxas21002c_data *data)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+
+	pm_runtime_mark_last_busy(dev);
+
+	return pm_runtime_put_autosuspend(dev);
+}
+
+static int fxas21002c_temp_get(struct fxas21002c_data *data, int *val)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	unsigned int temp;
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = fxas21002c_pm_get(data);
+	if (ret < 0)
+		goto data_unlock;
+
+	ret = regmap_field_read(data->regmap_fields[F_TEMP], &temp);
+	if (ret < 0) {
+		dev_err(dev, "failed to read temp: %d\n", ret);
+		fxas21002c_pm_put(data);
+		goto data_unlock;
+	}
+
+	*val = sign_extend32(temp, 7);
+
+	ret = fxas21002c_pm_put(data);
+	if (ret < 0)
+		goto data_unlock;
+
+	ret = IIO_VAL_INT;
+
+data_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int fxas21002c_axis_get(struct fxas21002c_data *data,
+			       int index, int *val)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	__be16 axis_be;
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = fxas21002c_pm_get(data);
+	if (ret < 0)
+		goto data_unlock;
+
+	ret = regmap_bulk_read(data->regmap, FXAS21002C_AXIS_TO_REG(index),
+			       &axis_be, sizeof(axis_be));
+	if (ret < 0) {
+		dev_err(dev, "failed to read axis: %d: %d\n", index, ret);
+		fxas21002c_pm_put(data);
+		goto data_unlock;
+	}
+
+	*val = sign_extend32(be16_to_cpu(axis_be), 15);
+
+	ret = fxas21002c_pm_put(data);
+	if (ret < 0)
+		goto data_unlock;
+
+	ret = IIO_VAL_INT;
+
+data_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int fxas21002c_odr_get(struct fxas21002c_data *data, int *odr)
+{
+	unsigned int odr_bits;
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = regmap_field_read(data->regmap_fields[F_DR], &odr_bits);
+	if (ret < 0)
+		goto data_unlock;
+
+	*odr = fxas21002c_odr_hz_from_value(data, odr_bits);
+
+	ret = IIO_VAL_INT;
+
+data_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int fxas21002c_odr_set(struct fxas21002c_data *data, int odr)
+{
+	int odr_bits;
+
+	odr_bits = fxas21002c_odr_value_from_hz(data, odr);
+	if (odr_bits < 0)
+		return odr_bits;
+
+	return fxas21002c_write(data, F_DR, odr_bits);
+}
+
+static int fxas21002c_lpf_get(struct fxas21002c_data *data, int *val2)
+{
+	unsigned int bw_bits;
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = regmap_field_read(data->regmap_fields[F_BW], &bw_bits);
+	if (ret < 0)
+		goto data_unlock;
+
+	*val2 = fxas21002c_lpf_bw_from_value(data, bw_bits) * 10000;
+
+	ret = IIO_VAL_INT_PLUS_MICRO;
+
+data_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int fxas21002c_lpf_set(struct fxas21002c_data *data, int bw)
+{
+	int bw_bits;
+	int odr;
+	int ret;
+
+	bw_bits = fxas21002c_lpf_value_from_bw(data, bw);
+	if (bw_bits < 0)
+		return bw_bits;
+
+	/*
+	 * From table 33 of the device spec, for ODR = 25Hz and 12.5 value 0.08
+	 * is not allowed and for ODR = 12.5 value 0.16 is also not allowed
+	 */
+	ret = fxas21002c_odr_get(data, &odr);
+	if (ret < 0)
+		return -EINVAL;
+
+	if ((odr == 25 && bw_bits > 0x01) || (odr == 12 && bw_bits > 0))
+		return -EINVAL;
+
+	return fxas21002c_write(data, F_BW, bw_bits);
+}
+
+static int fxas21002c_hpf_get(struct fxas21002c_data *data, int *val2)
+{
+	unsigned int sel_bits;
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = regmap_field_read(data->regmap_fields[F_SEL], &sel_bits);
+	if (ret < 0)
+		goto data_unlock;
+
+	*val2 = fxas21002c_hpf_sel_from_value(data, sel_bits);
+
+	ret = IIO_VAL_INT_PLUS_MICRO;
+
+data_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int fxas21002c_hpf_set(struct fxas21002c_data *data, int sel)
+{
+	int sel_bits;
+
+	sel_bits = fxas21002c_hpf_value_from_sel(data, sel);
+	if (sel_bits < 0)
+		return sel_bits;
+
+	return fxas21002c_write(data, F_SEL, sel_bits);
+}
+
+static int fxas21002c_scale_get(struct fxas21002c_data *data, int *val)
+{
+	int fs_bits;
+	int scale;
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = regmap_field_read(data->regmap_fields[F_FS], &fs_bits);
+	if (ret < 0)
+		goto data_unlock;
+
+	scale = fxas21002c_range_fs_from_value(data, fs_bits);
+	if (scale < 0) {
+		ret = scale;
+		goto data_unlock;
+	}
+
+	*val = scale;
+
+data_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static int fxas21002c_scale_set(struct fxas21002c_data *data, int range)
+{
+	int fs_bits;
+
+	fs_bits = fxas21002c_range_value_from_fs(data, range);
+	if (fs_bits < 0)
+		return fs_bits;
+
+	return fxas21002c_write(data, F_FS, fs_bits);
+}
+
+static int fxas21002c_read_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan, int *val,
+			       int *val2, long mask)
+{
+	struct fxas21002c_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		switch (chan->type) {
+		case IIO_TEMP:
+			return fxas21002c_temp_get(data, val);
+		case IIO_ANGL_VEL:
+			return fxas21002c_axis_get(data, chan->scan_index, val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val2 = FXAS21002C_SCALE_FRACTIONAL;
+			ret = fxas21002c_scale_get(data, val);
+			if (ret < 0)
+				return ret;
+
+			return IIO_VAL_FRACTIONAL;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		*val = 0;
+		return fxas21002c_lpf_get(data, val2);
+	case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
+		*val = 0;
+		return fxas21002c_hpf_get(data, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val2 = 0;
+		return fxas21002c_odr_get(data, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int fxas21002c_write_raw(struct iio_dev *indio_dev,
+				struct iio_chan_spec const *chan, int val,
+				int val2, long mask)
+{
+	struct fxas21002c_data *data = iio_priv(indio_dev);
+	int range;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2)
+			return -EINVAL;
+
+		return fxas21002c_odr_set(data, val);
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		if (val)
+			return -EINVAL;
+
+		val2 = val2 / 10000;
+		return fxas21002c_lpf_set(data, val2);
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			range = (((val * 1000 + val2 / 1000) *
+				  FXAS21002C_SCALE_FRACTIONAL) / 1000);
+			return fxas21002c_scale_set(data, range);
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY:
+		return fxas21002c_hpf_set(data, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL("12.5 25 50 100 200 400 800");
+
+static IIO_CONST_ATTR(in_anglvel_filter_low_pass_3db_frequency_available,
+		      "0.32 0.16 0.08");
+
+static IIO_CONST_ATTR(in_anglvel_filter_high_pass_3db_frequency_available,
+		      "0.018750 0.009625 0.004875 0.002475");
+
+static IIO_CONST_ATTR(in_anglvel_scale_available,
+		      "125.0 62.5 31.25 15.625 7.8125");
+
+static struct attribute *fxas21002c_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_anglvel_filter_low_pass_3db_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_anglvel_filter_high_pass_3db_frequency_available.dev_attr.attr,
+	&iio_const_attr_in_anglvel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group fxas21002c_attrs_group = {
+	.attrs = fxas21002c_attributes,
+};
+
+#define FXAS21002C_CHANNEL(_axis) {					\
+	.type = IIO_ANGL_VEL,						\
+	.modified = 1,							\
+	.channel2 = IIO_MOD_##_axis,					\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |		\
+		BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) |	\
+		BIT(IIO_CHAN_INFO_HIGH_PASS_FILTER_3DB_FREQUENCY) |	\
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),				\
+	.scan_index = CHANNEL_SCAN_INDEX_##_axis,			\
+	.scan_type = {							\
+		.sign = 's',						\
+		.realbits = 16,						\
+		.storagebits = 16,					\
+		.endianness = IIO_BE,					\
+	},								\
+}
+
+static const struct iio_chan_spec fxas21002c_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_index = -1,
+	},
+	FXAS21002C_CHANNEL(X),
+	FXAS21002C_CHANNEL(Y),
+	FXAS21002C_CHANNEL(Z),
+};
+
+static const struct iio_info fxas21002c_info = {
+	.attrs			= &fxas21002c_attrs_group,
+	.read_raw		= &fxas21002c_read_raw,
+	.write_raw		= &fxas21002c_write_raw,
+};
+
+static irqreturn_t fxas21002c_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct fxas21002c_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->lock);
+	ret = regmap_bulk_read(data->regmap, FXAS21002C_REG_OUT_X_MSB,
+			       data->buffer, CHANNEL_SCAN_MAX * sizeof(s16));
+	if (ret < 0)
+		goto out_unlock;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+					   data->timestamp);
+
+out_unlock:
+	mutex_unlock(&data->lock);
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int fxas21002c_chip_init(struct fxas21002c_data *data)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	unsigned int chip_id;
+	int ret;
+
+	ret = regmap_field_read(data->regmap_fields[F_WHO_AM_I], &chip_id);
+	if (ret < 0)
+		return ret;
+
+	if (chip_id != FXAS21002C_CHIP_ID_1 &&
+	    chip_id != FXAS21002C_CHIP_ID_2) {
+		dev_err(dev, "chip id 0x%02x is not supported\n", chip_id);
+		return -EINVAL;
+	}
+
+	data->chip_id = chip_id;
+
+	ret = fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY);
+	if (ret < 0)
+		return ret;
+
+	/* Set ODR to 200HZ as default */
+	ret = fxas21002c_odr_set(data, 200);
+	if (ret < 0)
+		dev_err(dev, "failed to set ODR: %d\n", ret);
+
+	return ret;
+}
+
+static int fxas21002c_data_rdy_trigger_set_state(struct iio_trigger *trig,
+						 bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct fxas21002c_data *data = iio_priv(indio_dev);
+
+	return regmap_field_write(data->regmap_fields[F_INT_EN_DRDY], state);
+}
+
+static const struct iio_trigger_ops fxas21002c_trigger_ops = {
+	.set_trigger_state = &fxas21002c_data_rdy_trigger_set_state,
+};
+
+static irqreturn_t fxas21002c_data_rdy_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct fxas21002c_data *data = iio_priv(indio_dev);
+
+	data->timestamp = iio_get_time_ns(indio_dev);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t fxas21002c_data_rdy_thread(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct fxas21002c_data *data = iio_priv(indio_dev);
+	unsigned int data_ready;
+	int ret;
+
+	ret = regmap_field_read(data->regmap_fields[F_SRC_DRDY], &data_ready);
+	if (ret < 0)
+		return IRQ_NONE;
+
+	if (!data_ready)
+		return IRQ_NONE;
+
+	iio_trigger_poll_chained(data->dready_trig);
+
+	return IRQ_HANDLED;
+}
+
+static int fxas21002c_trigger_probe(struct fxas21002c_data *data)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	unsigned long irq_trig;
+	bool irq_open_drain;
+	int irq1;
+	int ret;
+
+	if (!data->irq)
+		return 0;
+
+	irq1 = fwnode_irq_get_byname(dev_fwnode(dev), "INT1");
+	if (irq1 == data->irq) {
+		dev_info(dev, "using interrupt line INT1\n");
+		ret = regmap_field_write(data->regmap_fields[F_INT_CFG_DRDY],
+					 1);
+		if (ret < 0)
+			return ret;
+	}
+
+	dev_info(dev, "using interrupt line INT2\n");
+
+	irq_open_drain = device_property_read_bool(dev, "drive-open-drain");
+
+	data->dready_trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+						   indio_dev->name,
+						   iio_device_id(indio_dev));
+	if (!data->dready_trig)
+		return -ENOMEM;
+
+	irq_trig = irqd_get_trigger_type(irq_get_irq_data(data->irq));
+
+	if (irq_trig == IRQF_TRIGGER_RISING) {
+		ret = regmap_field_write(data->regmap_fields[F_IPOL], 1);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (irq_open_drain)
+		irq_trig |= IRQF_SHARED;
+
+	ret = devm_request_threaded_irq(dev, data->irq,
+					fxas21002c_data_rdy_handler,
+					fxas21002c_data_rdy_thread,
+					irq_trig, "fxas21002c_data_ready",
+					indio_dev);
+	if (ret < 0)
+		return ret;
+
+	data->dready_trig->ops = &fxas21002c_trigger_ops;
+	iio_trigger_set_drvdata(data->dready_trig, indio_dev);
+
+	return devm_iio_trigger_register(dev, data->dready_trig);
+}
+
+static int fxas21002c_power_enable(struct fxas21002c_data *data)
+{
+	int ret;
+
+	ret = regulator_enable(data->vdd);
+	if (ret < 0)
+		return ret;
+
+	ret = regulator_enable(data->vddio);
+	if (ret < 0) {
+		regulator_disable(data->vdd);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void fxas21002c_power_disable(struct fxas21002c_data *data)
+{
+	regulator_disable(data->vdd);
+	regulator_disable(data->vddio);
+}
+
+static void fxas21002c_power_disable_action(void *_data)
+{
+	struct fxas21002c_data *data = _data;
+
+	fxas21002c_power_disable(data);
+}
+
+static int fxas21002c_regulators_get(struct fxas21002c_data *data)
+{
+	struct device *dev = regmap_get_device(data->regmap);
+
+	data->vdd = devm_regulator_get(dev->parent, "vdd");
+	if (IS_ERR(data->vdd))
+		return PTR_ERR(data->vdd);
+
+	data->vddio = devm_regulator_get(dev->parent, "vddio");
+
+	return PTR_ERR_OR_ZERO(data->vddio);
+}
+
+int fxas21002c_core_probe(struct device *dev, struct regmap *regmap, int irq,
+			  const char *name)
+{
+	struct fxas21002c_data *data;
+	struct iio_dev *indio_dev;
+	struct regmap_field *f;
+	int i;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	dev_set_drvdata(dev, indio_dev);
+	data->irq = irq;
+	data->regmap = regmap;
+
+	for (i = 0; i < F_MAX_FIELDS; i++) {
+		f = devm_regmap_field_alloc(dev, data->regmap,
+					    fxas21002c_reg_fields[i]);
+		if (IS_ERR(f))
+			return PTR_ERR(f);
+
+		data->regmap_fields[i] = f;
+	}
+
+	mutex_init(&data->lock);
+
+	ret = fxas21002c_regulators_get(data);
+	if (ret < 0)
+		return ret;
+
+	ret = fxas21002c_power_enable(data);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, fxas21002c_power_disable_action,
+				       data);
+	if (ret < 0)
+		return ret;
+
+	ret = fxas21002c_chip_init(data);
+	if (ret < 0)
+		return ret;
+
+	indio_dev->channels = fxas21002c_channels;
+	indio_dev->num_channels = ARRAY_SIZE(fxas21002c_channels);
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &fxas21002c_info;
+
+	ret = fxas21002c_trigger_probe(data);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+					      fxas21002c_trigger_handler, NULL);
+	if (ret < 0)
+		return ret;
+
+	ret = pm_runtime_set_active(dev);
+	if (ret)
+		return ret;
+
+	pm_runtime_enable(dev);
+	pm_runtime_set_autosuspend_delay(dev, 2000);
+	pm_runtime_use_autosuspend(dev);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto pm_disable;
+
+	return 0;
+
+pm_disable:
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(fxas21002c_core_probe);
+
+void fxas21002c_core_remove(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+
+	iio_device_unregister(indio_dev);
+
+	pm_runtime_disable(dev);
+	pm_runtime_set_suspended(dev);
+}
+EXPORT_SYMBOL_GPL(fxas21002c_core_remove);
+
+static int __maybe_unused fxas21002c_suspend(struct device *dev)
+{
+	struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
+
+	fxas21002c_mode_set(data, FXAS21002C_MODE_STANDBY);
+	fxas21002c_power_disable(data);
+
+	return 0;
+}
+
+static int __maybe_unused fxas21002c_resume(struct device *dev)
+{
+	struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
+	int ret;
+
+	ret = fxas21002c_power_enable(data);
+	if (ret < 0)
+		return ret;
+
+	return fxas21002c_mode_set(data, data->prev_mode);
+}
+
+static int __maybe_unused fxas21002c_runtime_suspend(struct device *dev)
+{
+	struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
+
+	return fxas21002c_mode_set(data, FXAS21002C_MODE_READY);
+}
+
+static int __maybe_unused fxas21002c_runtime_resume(struct device *dev)
+{
+	struct fxas21002c_data *data = iio_priv(dev_get_drvdata(dev));
+
+	return fxas21002c_mode_set(data, FXAS21002C_MODE_ACTIVE);
+}
+
+const struct dev_pm_ops fxas21002c_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(fxas21002c_suspend, fxas21002c_resume)
+	SET_RUNTIME_PM_OPS(fxas21002c_runtime_suspend,
+			   fxas21002c_runtime_resume, NULL)
+};
+EXPORT_SYMBOL_GPL(fxas21002c_pm_ops);
+
+MODULE_AUTHOR("Rui Miguel Silva <rui.silva@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("FXAS21002C Gyro driver");
diff --git a/drivers/iio/gyro/fxas21002c_i2c.c b/drivers/iio/gyro/fxas21002c_i2c.c
new file mode 100644
index 000000000..13bb52c59
--- /dev/null
+++ b/drivers/iio/gyro/fxas21002c_i2c.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for NXP FXAS21002C Gyroscope - I2C
+ *
+ * Copyright (C) 2018 Linaro Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+
+#include "fxas21002c.h"
+
+static const struct regmap_config fxas21002c_regmap_i2c_conf = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = FXAS21002C_REG_CTRL3,
+};
+
+static int fxas21002c_i2c_probe(struct i2c_client *i2c)
+{
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_i2c(i2c, &fxas21002c_regmap_i2c_conf);
+	if (IS_ERR(regmap)) {
+		dev_err(&i2c->dev, "Failed to register i2c regmap: %ld\n",
+			PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return fxas21002c_core_probe(&i2c->dev, regmap, i2c->irq, i2c->name);
+}
+
+static void fxas21002c_i2c_remove(struct i2c_client *i2c)
+{
+	fxas21002c_core_remove(&i2c->dev);
+}
+
+static const struct i2c_device_id fxas21002c_i2c_id[] = {
+	{ "fxas21002c", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, fxas21002c_i2c_id);
+
+static const struct of_device_id fxas21002c_i2c_of_match[] = {
+	{ .compatible = "nxp,fxas21002c", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fxas21002c_i2c_of_match);
+
+static struct i2c_driver fxas21002c_i2c_driver = {
+	.driver = {
+		.name = "fxas21002c_i2c",
+		.pm = &fxas21002c_pm_ops,
+		.of_match_table = fxas21002c_i2c_of_match,
+	},
+	.probe_new	= fxas21002c_i2c_probe,
+	.remove		= fxas21002c_i2c_remove,
+	.id_table	= fxas21002c_i2c_id,
+};
+module_i2c_driver(fxas21002c_i2c_driver);
+
+MODULE_AUTHOR("Rui Miguel Silva <rui.silva@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("FXAS21002C I2C Gyro driver");
diff --git a/drivers/iio/gyro/fxas21002c_spi.c b/drivers/iio/gyro/fxas21002c_spi.c
new file mode 100644
index 000000000..c3ac169fa
--- /dev/null
+++ b/drivers/iio/gyro/fxas21002c_spi.c
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for NXP Fxas21002c Gyroscope - SPI
+ *
+ * Copyright (C) 2019 Linaro Ltd.
+ */
+
+#include <linux/err.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "fxas21002c.h"
+
+static const struct regmap_config fxas21002c_regmap_spi_conf = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = FXAS21002C_REG_CTRL3,
+};
+
+static int fxas21002c_spi_probe(struct spi_device *spi)
+{
+	const struct spi_device_id *id = spi_get_device_id(spi);
+	struct regmap *regmap;
+
+	regmap = devm_regmap_init_spi(spi, &fxas21002c_regmap_spi_conf);
+	if (IS_ERR(regmap)) {
+		dev_err(&spi->dev, "Failed to register spi regmap: %ld\n",
+			PTR_ERR(regmap));
+		return PTR_ERR(regmap);
+	}
+
+	return fxas21002c_core_probe(&spi->dev, regmap, spi->irq, id->name);
+}
+
+static void fxas21002c_spi_remove(struct spi_device *spi)
+{
+	fxas21002c_core_remove(&spi->dev);
+}
+
+static const struct spi_device_id fxas21002c_spi_id[] = {
+	{ "fxas21002c", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(spi, fxas21002c_spi_id);
+
+static const struct of_device_id fxas21002c_spi_of_match[] = {
+	{ .compatible = "nxp,fxas21002c", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, fxas21002c_spi_of_match);
+
+static struct spi_driver fxas21002c_spi_driver = {
+	.driver = {
+		.name = "fxas21002c_spi",
+		.pm = &fxas21002c_pm_ops,
+		.of_match_table = fxas21002c_spi_of_match,
+	},
+	.probe		= fxas21002c_spi_probe,
+	.remove		= fxas21002c_spi_remove,
+	.id_table	= fxas21002c_spi_id,
+};
+module_spi_driver(fxas21002c_spi_driver);
+
+MODULE_AUTHOR("Rui Miguel Silva <rui.silva@linaro.org>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("FXAS21002C SPI Gyro driver");
diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c
new file mode 100644
index 000000000..698c50da1
--- /dev/null
+++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c
@@ -0,0 +1,398 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HID Sensors Driver
+ * Copyright (c) 2012, Intel Corporation.
+ */
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/slab.h>
+#include <linux/hid-sensor-hub.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include "../common/hid-sensors/hid-sensor-trigger.h"
+
+enum gyro_3d_channel {
+	CHANNEL_SCAN_INDEX_X,
+	CHANNEL_SCAN_INDEX_Y,
+	CHANNEL_SCAN_INDEX_Z,
+	GYRO_3D_CHANNEL_MAX,
+};
+
+#define CHANNEL_SCAN_INDEX_TIMESTAMP GYRO_3D_CHANNEL_MAX
+struct gyro_3d_state {
+	struct hid_sensor_hub_callbacks callbacks;
+	struct hid_sensor_common common_attributes;
+	struct hid_sensor_hub_attribute_info gyro[GYRO_3D_CHANNEL_MAX];
+	struct {
+		u32 gyro_val[GYRO_3D_CHANNEL_MAX];
+		u64 timestamp __aligned(8);
+	} scan;
+	int scale_pre_decml;
+	int scale_post_decml;
+	int scale_precision;
+	int value_offset;
+	s64 timestamp;
+};
+
+static const u32 gyro_3d_addresses[GYRO_3D_CHANNEL_MAX] = {
+	HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS,
+	HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS,
+	HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS
+};
+
+static const u32 gryo_3d_sensitivity_addresses[] = {
+	HID_USAGE_SENSOR_DATA_ANGL_VELOCITY,
+};
+
+/* Channel definitions */
+static const struct iio_chan_spec gyro_3d_channels[] = {
+	{
+		.type = IIO_ANGL_VEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_X,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+		.scan_index = CHANNEL_SCAN_INDEX_X,
+	}, {
+		.type = IIO_ANGL_VEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Y,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+		.scan_index = CHANNEL_SCAN_INDEX_Y,
+	}, {
+		.type = IIO_ANGL_VEL,
+		.modified = 1,
+		.channel2 = IIO_MOD_Z,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE) |
+		BIT(IIO_CHAN_INFO_SAMP_FREQ) |
+		BIT(IIO_CHAN_INFO_HYSTERESIS),
+		.scan_index = CHANNEL_SCAN_INDEX_Z,
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(CHANNEL_SCAN_INDEX_TIMESTAMP)
+};
+
+/* Adjust channel real bits based on report descriptor */
+static void gyro_3d_adjust_channel_bit_mask(struct iio_chan_spec *channels,
+						int channel, int size)
+{
+	channels[channel].scan_type.sign = 's';
+	/* Real storage bits will change based on the report desc. */
+	channels[channel].scan_type.realbits = size * 8;
+	/* Maximum size of a sample to capture is u32 */
+	channels[channel].scan_type.storagebits = sizeof(u32) * 8;
+}
+
+/* Channel read_raw handler */
+static int gyro_3d_read_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int *val, int *val2,
+			      long mask)
+{
+	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
+	int report_id = -1;
+	u32 address;
+	int ret_type;
+	s32 min;
+
+	*val = 0;
+	*val2 = 0;
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		hid_sensor_power_state(&gyro_state->common_attributes, true);
+		report_id = gyro_state->gyro[chan->scan_index].report_id;
+		min = gyro_state->gyro[chan->scan_index].logical_minimum;
+		address = gyro_3d_addresses[chan->scan_index];
+		if (report_id >= 0)
+			*val = sensor_hub_input_attr_get_raw_value(
+					gyro_state->common_attributes.hsdev,
+					HID_USAGE_SENSOR_GYRO_3D, address,
+					report_id,
+					SENSOR_HUB_SYNC,
+					min < 0);
+		else {
+			*val = 0;
+			hid_sensor_power_state(&gyro_state->common_attributes,
+						false);
+			return -EINVAL;
+		}
+		hid_sensor_power_state(&gyro_state->common_attributes, false);
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = gyro_state->scale_pre_decml;
+		*val2 = gyro_state->scale_post_decml;
+		ret_type = gyro_state->scale_precision;
+		break;
+	case IIO_CHAN_INFO_OFFSET:
+		*val = gyro_state->value_offset;
+		ret_type = IIO_VAL_INT;
+		break;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret_type = hid_sensor_read_samp_freq_value(
+			&gyro_state->common_attributes, val, val2);
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		ret_type = hid_sensor_read_raw_hyst_value(
+			&gyro_state->common_attributes, val, val2);
+		break;
+	default:
+		ret_type = -EINVAL;
+		break;
+	}
+
+	return ret_type;
+}
+
+/* Channel write_raw handler */
+static int gyro_3d_write_raw(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       int val,
+			       int val2,
+			       long mask)
+{
+	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
+	int ret = 0;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = hid_sensor_write_samp_freq_value(
+				&gyro_state->common_attributes, val, val2);
+		break;
+	case IIO_CHAN_INFO_HYSTERESIS:
+		ret = hid_sensor_write_raw_hyst_value(
+				&gyro_state->common_attributes, val, val2);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static const struct iio_info gyro_3d_info = {
+	.read_raw = &gyro_3d_read_raw,
+	.write_raw = &gyro_3d_write_raw,
+};
+
+/* Callback handler to send event after all samples are received and captured */
+static int gyro_3d_proc_event(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
+
+	dev_dbg(&indio_dev->dev, "gyro_3d_proc_event\n");
+	if (atomic_read(&gyro_state->common_attributes.data_ready)) {
+		if (!gyro_state->timestamp)
+			gyro_state->timestamp = iio_get_time_ns(indio_dev);
+
+		iio_push_to_buffers_with_timestamp(indio_dev, &gyro_state->scan,
+						   gyro_state->timestamp);
+
+		gyro_state->timestamp = 0;
+	}
+
+	return 0;
+}
+
+/* Capture samples in local storage */
+static int gyro_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
+				unsigned usage_id,
+				size_t raw_len, char *raw_data,
+				void *priv)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(priv);
+	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
+	int offset;
+	int ret = -EINVAL;
+
+	switch (usage_id) {
+	case HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS:
+	case HID_USAGE_SENSOR_ANGL_VELOCITY_Y_AXIS:
+	case HID_USAGE_SENSOR_ANGL_VELOCITY_Z_AXIS:
+		offset = usage_id - HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS;
+		gyro_state->scan.gyro_val[CHANNEL_SCAN_INDEX_X + offset] =
+				*(u32 *)raw_data;
+		ret = 0;
+	break;
+	case HID_USAGE_SENSOR_TIME_TIMESTAMP:
+		gyro_state->timestamp =
+			hid_sensor_convert_timestamp(&gyro_state->common_attributes,
+						     *(s64 *)raw_data);
+		ret = 0;
+	break;
+	default:
+		break;
+	}
+
+	return ret;
+}
+
+/* Parse report which is specific to an usage id*/
+static int gyro_3d_parse_report(struct platform_device *pdev,
+				struct hid_sensor_hub_device *hsdev,
+				struct iio_chan_spec *channels,
+				unsigned usage_id,
+				struct gyro_3d_state *st)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i <= CHANNEL_SCAN_INDEX_Z; ++i) {
+		ret = sensor_hub_input_get_attribute_info(hsdev,
+				HID_INPUT_REPORT,
+				usage_id,
+				HID_USAGE_SENSOR_ANGL_VELOCITY_X_AXIS + i,
+				&st->gyro[CHANNEL_SCAN_INDEX_X + i]);
+		if (ret < 0)
+			break;
+		gyro_3d_adjust_channel_bit_mask(channels,
+				CHANNEL_SCAN_INDEX_X + i,
+				st->gyro[CHANNEL_SCAN_INDEX_X + i].size);
+	}
+	dev_dbg(&pdev->dev, "gyro_3d %x:%x, %x:%x, %x:%x\n",
+			st->gyro[0].index,
+			st->gyro[0].report_id,
+			st->gyro[1].index, st->gyro[1].report_id,
+			st->gyro[2].index, st->gyro[2].report_id);
+
+	st->scale_precision = hid_sensor_format_scale(
+				HID_USAGE_SENSOR_GYRO_3D,
+				&st->gyro[CHANNEL_SCAN_INDEX_X],
+				&st->scale_pre_decml, &st->scale_post_decml);
+
+	return ret;
+}
+
+/* Function to initialize the processing for usage id */
+static int hid_gyro_3d_probe(struct platform_device *pdev)
+{
+	int ret = 0;
+	static const char *name = "gyro_3d";
+	struct iio_dev *indio_dev;
+	struct gyro_3d_state *gyro_state;
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*gyro_state));
+	if (!indio_dev)
+		return -ENOMEM;
+	platform_set_drvdata(pdev, indio_dev);
+
+	gyro_state = iio_priv(indio_dev);
+	gyro_state->common_attributes.hsdev = hsdev;
+	gyro_state->common_attributes.pdev = pdev;
+
+	ret = hid_sensor_parse_common_attributes(hsdev,
+						HID_USAGE_SENSOR_GYRO_3D,
+						&gyro_state->common_attributes,
+						gryo_3d_sensitivity_addresses,
+						ARRAY_SIZE(gryo_3d_sensitivity_addresses));
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup common attributes\n");
+		return ret;
+	}
+
+	indio_dev->channels = devm_kmemdup(&pdev->dev, gyro_3d_channels,
+					   sizeof(gyro_3d_channels), GFP_KERNEL);
+	if (!indio_dev->channels) {
+		dev_err(&pdev->dev, "failed to duplicate channels\n");
+		return -ENOMEM;
+	}
+
+	ret = gyro_3d_parse_report(pdev, hsdev,
+				   (struct iio_chan_spec *)indio_dev->channels,
+				   HID_USAGE_SENSOR_GYRO_3D, gyro_state);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to setup attributes\n");
+		return ret;
+	}
+
+	indio_dev->num_channels = ARRAY_SIZE(gyro_3d_channels);
+	indio_dev->info = &gyro_3d_info;
+	indio_dev->name = name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	atomic_set(&gyro_state->common_attributes.data_ready, 0);
+
+	ret = hid_sensor_setup_trigger(indio_dev, name,
+					&gyro_state->common_attributes);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "trigger setup failed\n");
+		return ret;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "device register failed\n");
+		goto error_remove_trigger;
+	}
+
+	gyro_state->callbacks.send_event = gyro_3d_proc_event;
+	gyro_state->callbacks.capture_sample = gyro_3d_capture_sample;
+	gyro_state->callbacks.pdev = pdev;
+	ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D,
+					&gyro_state->callbacks);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "callback reg failed\n");
+		goto error_iio_unreg;
+	}
+
+	return ret;
+
+error_iio_unreg:
+	iio_device_unregister(indio_dev);
+error_remove_trigger:
+	hid_sensor_remove_trigger(indio_dev, &gyro_state->common_attributes);
+	return ret;
+}
+
+/* Function to deinitialize the processing for usage id */
+static int hid_gyro_3d_remove(struct platform_device *pdev)
+{
+	struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct gyro_3d_state *gyro_state = iio_priv(indio_dev);
+
+	sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_GYRO_3D);
+	iio_device_unregister(indio_dev);
+	hid_sensor_remove_trigger(indio_dev, &gyro_state->common_attributes);
+
+	return 0;
+}
+
+static const struct platform_device_id hid_gyro_3d_ids[] = {
+	{
+		/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
+		.name = "HID-SENSOR-200076",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, hid_gyro_3d_ids);
+
+static struct platform_driver hid_gyro_3d_platform_driver = {
+	.id_table = hid_gyro_3d_ids,
+	.driver = {
+		.name	= KBUILD_MODNAME,
+		.pm	= &hid_sensor_pm_ops,
+	},
+	.probe		= hid_gyro_3d_probe,
+	.remove		= hid_gyro_3d_remove,
+};
+module_platform_driver(hid_gyro_3d_platform_driver);
+
+MODULE_DESCRIPTION("HID Sensor Gyroscope 3D");
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@intel.com>");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_HID);
diff --git a/drivers/iio/gyro/itg3200_buffer.c b/drivers/iio/gyro/itg3200_buffer.c
new file mode 100644
index 000000000..4cfa0d439
--- /dev/null
+++ b/drivers/iio/gyro/itg3200_buffer.c
@@ -0,0 +1,155 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * itg3200_buffer.c -- support InvenSense ITG3200
+ *                     Digital 3-Axis Gyroscope driver
+ *
+ * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de>
+ * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
+ * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
+ */
+
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/gyro/itg3200.h>
+
+
+static int itg3200_read_all_channels(struct i2c_client *i2c, __be16 *buf)
+{
+	u8 tx = 0x80 | ITG3200_REG_TEMP_OUT_H;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = i2c->addr,
+			.flags = i2c->flags,
+			.len = 1,
+			.buf = &tx,
+		},
+		{
+			.addr = i2c->addr,
+			.flags = i2c->flags | I2C_M_RD,
+			.len = ITG3200_SCAN_ELEMENTS * sizeof(s16),
+			.buf = (char *)&buf,
+		},
+	};
+
+	return i2c_transfer(i2c->adapter, msg, 2);
+}
+
+static irqreturn_t itg3200_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct itg3200 *st = iio_priv(indio_dev);
+	/*
+	 * Ensure correct alignment and padding including for the
+	 * timestamp that may be inserted.
+	 */
+	struct {
+		__be16 buf[ITG3200_SCAN_ELEMENTS];
+		s64 ts __aligned(8);
+	} scan;
+
+	int ret = itg3200_read_all_channels(st->i2c, scan.buf);
+	if (ret < 0)
+		goto error_ret;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan, pf->timestamp);
+
+error_ret:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+int itg3200_buffer_configure(struct iio_dev *indio_dev)
+{
+	return iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
+		itg3200_trigger_handler, NULL);
+}
+
+void itg3200_buffer_unconfigure(struct iio_dev *indio_dev)
+{
+	iio_triggered_buffer_cleanup(indio_dev);
+}
+
+
+static int itg3200_data_rdy_trigger_set_state(struct iio_trigger *trig,
+		bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	int ret;
+	u8 msc;
+
+	ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_IRQ_CONFIG, &msc);
+	if (ret)
+		goto error_ret;
+
+	if (state)
+		msc |= ITG3200_IRQ_DATA_RDY_ENABLE;
+	else
+		msc &= ~ITG3200_IRQ_DATA_RDY_ENABLE;
+
+	ret = itg3200_write_reg_8(indio_dev, ITG3200_REG_IRQ_CONFIG, msc);
+	if (ret)
+		goto error_ret;
+
+error_ret:
+	return ret;
+
+}
+
+static const struct iio_trigger_ops itg3200_trigger_ops = {
+	.set_trigger_state = &itg3200_data_rdy_trigger_set_state,
+};
+
+int itg3200_probe_trigger(struct iio_dev *indio_dev)
+{
+	int ret;
+	struct itg3200 *st = iio_priv(indio_dev);
+
+	st->trig = iio_trigger_alloc(&st->i2c->dev, "%s-dev%d", indio_dev->name,
+				     iio_device_id(indio_dev));
+	if (!st->trig)
+		return -ENOMEM;
+
+	ret = request_irq(st->i2c->irq,
+			  &iio_trigger_generic_data_rdy_poll,
+			  IRQF_TRIGGER_RISING,
+			  "itg3200_data_rdy",
+			  st->trig);
+	if (ret)
+		goto error_free_trig;
+
+
+	st->trig->ops = &itg3200_trigger_ops;
+	iio_trigger_set_drvdata(st->trig, indio_dev);
+	ret = iio_trigger_register(st->trig);
+	if (ret)
+		goto error_free_irq;
+
+	/* select default trigger */
+	indio_dev->trig = iio_trigger_get(st->trig);
+
+	return 0;
+
+error_free_irq:
+	free_irq(st->i2c->irq, st->trig);
+error_free_trig:
+	iio_trigger_free(st->trig);
+	return ret;
+}
+
+void itg3200_remove_trigger(struct iio_dev *indio_dev)
+{
+	struct itg3200 *st = iio_priv(indio_dev);
+
+	iio_trigger_unregister(st->trig);
+	free_irq(st->i2c->irq, st->trig);
+	iio_trigger_free(st->trig);
+}
diff --git a/drivers/iio/gyro/itg3200_core.c b/drivers/iio/gyro/itg3200_core.c
new file mode 100644
index 000000000..421501584
--- /dev/null
+++ b/drivers/iio/gyro/itg3200_core.c
@@ -0,0 +1,413 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * itg3200_core.c -- support InvenSense ITG3200
+ *                   Digital 3-Axis Gyroscope driver
+ *
+ * Copyright (c) 2011 Christian Strobel <christian.strobel@iis.fraunhofer.de>
+ * Copyright (c) 2011 Manuel Stahl <manuel.stahl@iis.fraunhofer.de>
+ * Copyright (c) 2012 Thorsten Nowak <thorsten.nowak@iis.fraunhofer.de>
+ *
+ * TODO:
+ * - Support digital low pass filter
+ * - Support power management
+ */
+
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/stat.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/iio/gyro/itg3200.h>
+
+
+int itg3200_write_reg_8(struct iio_dev *indio_dev,
+		u8 reg_address, u8 val)
+{
+	struct itg3200 *st = iio_priv(indio_dev);
+
+	return i2c_smbus_write_byte_data(st->i2c, 0x80 | reg_address, val);
+}
+
+int itg3200_read_reg_8(struct iio_dev *indio_dev,
+		u8 reg_address, u8 *val)
+{
+	struct itg3200 *st = iio_priv(indio_dev);
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(st->i2c, reg_address);
+	if (ret < 0)
+		return ret;
+	*val = ret;
+	return 0;
+}
+
+static int itg3200_read_reg_s16(struct iio_dev *indio_dev, u8 lower_reg_address,
+		int *val)
+{
+	struct itg3200 *st = iio_priv(indio_dev);
+	struct i2c_client *client = st->i2c;
+	int ret;
+	s16 out;
+
+	struct i2c_msg msg[2] = {
+		{
+			.addr = client->addr,
+			.flags = client->flags,
+			.len = 1,
+			.buf = (char *)&lower_reg_address,
+		},
+		{
+			.addr = client->addr,
+			.flags = client->flags | I2C_M_RD,
+			.len = 2,
+			.buf = (char *)&out,
+		},
+	};
+
+	lower_reg_address |= 0x80;
+	ret = i2c_transfer(client->adapter, msg, 2);
+	be16_to_cpus(&out);
+	*val = out;
+
+	return (ret == 2) ? 0 : ret;
+}
+
+static int itg3200_read_raw(struct iio_dev *indio_dev,
+		const struct iio_chan_spec *chan,
+		int *val, int *val2, long info)
+{
+	int ret = 0;
+	u8 reg;
+	u8 regval;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		reg = (u8)chan->address;
+		ret = itg3200_read_reg_s16(indio_dev, reg, val);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		if (chan->type == IIO_TEMP)
+			*val2 = 1000000000/280;
+		else
+			*val2 = 1214142; /* (1 / 14,375) * (PI / 180) */
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_CHAN_INFO_OFFSET:
+		/* Only the temperature channel has an offset */
+		*val = 23000;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &regval);
+		if (ret)
+			return ret;
+
+		*val = (regval & ITG3200_DLPF_CFG_MASK) ? 1000 : 8000;
+
+		ret = itg3200_read_reg_8(indio_dev,
+					 ITG3200_REG_SAMPLE_RATE_DIV,
+					 &regval);
+		if (ret)
+			return ret;
+
+		*val /= regval + 1;
+		return IIO_VAL_INT;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int itg3200_write_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int val,
+			     int val2,
+			     long mask)
+{
+	int ret;
+	u8 t;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val == 0 || val2 != 0)
+			return -EINVAL;
+
+		mutex_lock(&indio_dev->mlock);
+
+		ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &t);
+		if (ret) {
+			mutex_unlock(&indio_dev->mlock);
+			return ret;
+		}
+		t = ((t & ITG3200_DLPF_CFG_MASK) ? 1000u : 8000u) / val - 1;
+
+		ret = itg3200_write_reg_8(indio_dev,
+					  ITG3200_REG_SAMPLE_RATE_DIV,
+					  t);
+
+		mutex_unlock(&indio_dev->mlock);
+		return ret;
+
+	default:
+		return -EINVAL;
+	}
+}
+
+/*
+ * Reset device and internal registers to the power-up-default settings
+ * Use the gyro clock as reference, as suggested by the datasheet
+ */
+static int itg3200_reset(struct iio_dev *indio_dev)
+{
+	struct itg3200 *st = iio_priv(indio_dev);
+	int ret;
+
+	dev_dbg(&st->i2c->dev, "reset device");
+
+	ret = itg3200_write_reg_8(indio_dev,
+			ITG3200_REG_POWER_MANAGEMENT,
+			ITG3200_RESET);
+	if (ret) {
+		dev_err(&st->i2c->dev, "error resetting device");
+		goto error_ret;
+	}
+
+	/* Wait for PLL (1ms according to datasheet) */
+	udelay(1500);
+
+	ret = itg3200_write_reg_8(indio_dev,
+			ITG3200_REG_IRQ_CONFIG,
+			ITG3200_IRQ_ACTIVE_HIGH |
+			ITG3200_IRQ_PUSH_PULL |
+			ITG3200_IRQ_LATCH_50US_PULSE |
+			ITG3200_IRQ_LATCH_CLEAR_ANY);
+
+	if (ret)
+		dev_err(&st->i2c->dev, "error init device");
+
+error_ret:
+	return ret;
+}
+
+/* itg3200_enable_full_scale() - Disables the digital low pass filter */
+static int itg3200_enable_full_scale(struct iio_dev *indio_dev)
+{
+	u8 val;
+	int ret;
+
+	ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_DLPF, &val);
+	if (ret)
+		goto err_ret;
+
+	val |= ITG3200_DLPF_FS_SEL_2000;
+	return itg3200_write_reg_8(indio_dev, ITG3200_REG_DLPF, val);
+
+err_ret:
+	return ret;
+}
+
+static int itg3200_initial_setup(struct iio_dev *indio_dev)
+{
+	struct itg3200 *st = iio_priv(indio_dev);
+	int ret;
+	u8 val;
+
+	ret = itg3200_reset(indio_dev);
+	if (ret)
+		goto err_ret;
+
+	ret = itg3200_read_reg_8(indio_dev, ITG3200_REG_ADDRESS, &val);
+	if (ret)
+		goto err_ret;
+
+	if (((val >> 1) & 0x3f) != 0x34) {
+		dev_err(&st->i2c->dev, "invalid reg value 0x%02x", val);
+		ret = -ENXIO;
+		goto err_ret;
+	}
+
+	ret = itg3200_enable_full_scale(indio_dev);
+err_ret:
+	return ret;
+}
+
+static const struct iio_mount_matrix *
+itg3200_get_mount_matrix(const struct iio_dev *indio_dev,
+			  const struct iio_chan_spec *chan)
+{
+	struct itg3200 *data = iio_priv(indio_dev);
+
+	return &data->orientation;
+}
+
+static const struct iio_chan_spec_ext_info itg3200_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, itg3200_get_mount_matrix),
+	{ }
+};
+
+#define ITG3200_ST						\
+	{ .sign = 's', .realbits = 16, .storagebits = 16, .endianness = IIO_BE }
+
+#define ITG3200_GYRO_CHAN(_mod) { \
+	.type = IIO_ANGL_VEL, \
+	.modified = 1, \
+	.channel2 = IIO_MOD_ ## _mod, \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.address = ITG3200_REG_GYRO_ ## _mod ## OUT_H, \
+	.scan_index = ITG3200_SCAN_GYRO_ ## _mod, \
+	.scan_type = ITG3200_ST, \
+	.ext_info = itg3200_ext_info, \
+}
+
+static const struct iio_chan_spec itg3200_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.channel2 = IIO_NO_MOD,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
+		BIT(IIO_CHAN_INFO_SCALE),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.address = ITG3200_REG_TEMP_OUT_H,
+		.scan_index = ITG3200_SCAN_TEMP,
+		.scan_type = ITG3200_ST,
+	},
+	ITG3200_GYRO_CHAN(X),
+	ITG3200_GYRO_CHAN(Y),
+	ITG3200_GYRO_CHAN(Z),
+	IIO_CHAN_SOFT_TIMESTAMP(ITG3200_SCAN_ELEMENTS),
+};
+
+static const struct iio_info itg3200_info = {
+	.read_raw = &itg3200_read_raw,
+	.write_raw = &itg3200_write_raw,
+};
+
+static const unsigned long itg3200_available_scan_masks[] = { 0xffffffff, 0x0 };
+
+static int itg3200_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	int ret;
+	struct itg3200 *st;
+	struct iio_dev *indio_dev;
+
+	dev_dbg(&client->dev, "probe I2C dev with IRQ %i", client->irq);
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+
+	ret = iio_read_mount_matrix(&client->dev, &st->orientation);
+	if (ret)
+		return ret;
+
+	i2c_set_clientdata(client, indio_dev);
+	st->i2c = client;
+
+	indio_dev->name = client->dev.driver->name;
+	indio_dev->channels = itg3200_channels;
+	indio_dev->num_channels = ARRAY_SIZE(itg3200_channels);
+	indio_dev->available_scan_masks = itg3200_available_scan_masks;
+	indio_dev->info = &itg3200_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = itg3200_buffer_configure(indio_dev);
+	if (ret)
+		return ret;
+
+	if (client->irq) {
+		ret = itg3200_probe_trigger(indio_dev);
+		if (ret)
+			goto error_unconfigure_buffer;
+	}
+
+	ret = itg3200_initial_setup(indio_dev);
+	if (ret)
+		goto error_remove_trigger;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_remove_trigger;
+
+	return 0;
+
+error_remove_trigger:
+	if (client->irq)
+		itg3200_remove_trigger(indio_dev);
+error_unconfigure_buffer:
+	itg3200_buffer_unconfigure(indio_dev);
+	return ret;
+}
+
+static void itg3200_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+
+	if (client->irq)
+		itg3200_remove_trigger(indio_dev);
+
+	itg3200_buffer_unconfigure(indio_dev);
+}
+
+static int itg3200_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct itg3200 *st = iio_priv(indio_dev);
+
+	dev_dbg(&st->i2c->dev, "suspend device");
+
+	return itg3200_write_reg_8(indio_dev, ITG3200_REG_POWER_MANAGEMENT,
+				   ITG3200_SLEEP);
+}
+
+static int itg3200_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+
+	return itg3200_initial_setup(indio_dev);
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(itg3200_pm_ops, itg3200_suspend,
+				itg3200_resume);
+
+static const struct i2c_device_id itg3200_id[] = {
+	{ "itg3200", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, itg3200_id);
+
+static const struct of_device_id itg3200_of_match[] = {
+	{ .compatible = "invensense,itg3200" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, itg3200_of_match);
+
+static struct i2c_driver itg3200_driver = {
+	.driver = {
+		.name	= "itg3200",
+		.of_match_table = itg3200_of_match,
+		.pm	= pm_sleep_ptr(&itg3200_pm_ops),
+	},
+	.id_table	= itg3200_id,
+	.probe		= itg3200_probe,
+	.remove		= itg3200_remove,
+};
+
+module_i2c_driver(itg3200_driver);
+
+MODULE_AUTHOR("Christian Strobel <christian.strobel@iis.fraunhofer.de>");
+MODULE_DESCRIPTION("ITG3200 Gyroscope I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/gyro/mpu3050-core.c b/drivers/iio/gyro/mpu3050-core.c
new file mode 100644
index 000000000..6a6d84a3d
--- /dev/null
+++ b/drivers/iio/gyro/mpu3050-core.c
@@ -0,0 +1,1295 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * MPU3050 gyroscope driver
+ *
+ * Copyright (C) 2016 Linaro Ltd.
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Based on the input subsystem driver, Copyright (C) 2011 Wistron Co.Ltd
+ * Joseph Lai <joseph_lai@wistron.com> and trimmed down by
+ * Alan Cox <alan@linux.intel.com> in turn based on bma023.c.
+ * Device behaviour based on a misc driver posted by Nathan Royer in 2011.
+ *
+ * TODO: add support for setting up the low pass 3dB frequency.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+
+#include "mpu3050.h"
+
+#define MPU3050_CHIP_ID		0x68
+#define MPU3050_CHIP_ID_MASK	0x7E
+
+/*
+ * Register map: anything suffixed *_H is a big-endian high byte and always
+ * followed by the corresponding low byte (*_L) even though these are not
+ * explicitly included in the register definitions.
+ */
+#define MPU3050_CHIP_ID_REG	0x00
+#define MPU3050_PRODUCT_ID_REG	0x01
+#define MPU3050_XG_OFFS_TC	0x05
+#define MPU3050_YG_OFFS_TC	0x08
+#define MPU3050_ZG_OFFS_TC	0x0B
+#define MPU3050_X_OFFS_USR_H	0x0C
+#define MPU3050_Y_OFFS_USR_H	0x0E
+#define MPU3050_Z_OFFS_USR_H	0x10
+#define MPU3050_FIFO_EN		0x12
+#define MPU3050_AUX_VDDIO	0x13
+#define MPU3050_SLV_ADDR	0x14
+#define MPU3050_SMPLRT_DIV	0x15
+#define MPU3050_DLPF_FS_SYNC	0x16
+#define MPU3050_INT_CFG		0x17
+#define MPU3050_AUX_ADDR	0x18
+#define MPU3050_INT_STATUS	0x1A
+#define MPU3050_TEMP_H		0x1B
+#define MPU3050_XOUT_H		0x1D
+#define MPU3050_YOUT_H		0x1F
+#define MPU3050_ZOUT_H		0x21
+#define MPU3050_DMP_CFG1	0x35
+#define MPU3050_DMP_CFG2	0x36
+#define MPU3050_BANK_SEL	0x37
+#define MPU3050_MEM_START_ADDR	0x38
+#define MPU3050_MEM_R_W		0x39
+#define MPU3050_FIFO_COUNT_H	0x3A
+#define MPU3050_FIFO_R		0x3C
+#define MPU3050_USR_CTRL	0x3D
+#define MPU3050_PWR_MGM		0x3E
+
+/* MPU memory bank read options */
+#define MPU3050_MEM_PRFTCH	BIT(5)
+#define MPU3050_MEM_USER_BANK	BIT(4)
+/* Bits 8-11 select memory bank */
+#define MPU3050_MEM_RAM_BANK_0	0
+#define MPU3050_MEM_RAM_BANK_1	1
+#define MPU3050_MEM_RAM_BANK_2	2
+#define MPU3050_MEM_RAM_BANK_3	3
+#define MPU3050_MEM_OTP_BANK_0	4
+
+#define MPU3050_AXIS_REGS(axis) (MPU3050_XOUT_H + (axis * 2))
+
+/* Register bits */
+
+/* FIFO Enable */
+#define MPU3050_FIFO_EN_FOOTER		BIT(0)
+#define MPU3050_FIFO_EN_AUX_ZOUT	BIT(1)
+#define MPU3050_FIFO_EN_AUX_YOUT	BIT(2)
+#define MPU3050_FIFO_EN_AUX_XOUT	BIT(3)
+#define MPU3050_FIFO_EN_GYRO_ZOUT	BIT(4)
+#define MPU3050_FIFO_EN_GYRO_YOUT	BIT(5)
+#define MPU3050_FIFO_EN_GYRO_XOUT	BIT(6)
+#define MPU3050_FIFO_EN_TEMP_OUT	BIT(7)
+
+/*
+ * Digital Low Pass filter (DLPF)
+ * Full Scale (FS)
+ * and Synchronization
+ */
+#define MPU3050_EXT_SYNC_NONE		0x00
+#define MPU3050_EXT_SYNC_TEMP		0x20
+#define MPU3050_EXT_SYNC_GYROX		0x40
+#define MPU3050_EXT_SYNC_GYROY		0x60
+#define MPU3050_EXT_SYNC_GYROZ		0x80
+#define MPU3050_EXT_SYNC_ACCELX	0xA0
+#define MPU3050_EXT_SYNC_ACCELY	0xC0
+#define MPU3050_EXT_SYNC_ACCELZ	0xE0
+#define MPU3050_EXT_SYNC_MASK		0xE0
+#define MPU3050_EXT_SYNC_SHIFT		5
+
+#define MPU3050_FS_250DPS		0x00
+#define MPU3050_FS_500DPS		0x08
+#define MPU3050_FS_1000DPS		0x10
+#define MPU3050_FS_2000DPS		0x18
+#define MPU3050_FS_MASK			0x18
+#define MPU3050_FS_SHIFT		3
+
+#define MPU3050_DLPF_CFG_256HZ_NOLPF2	0x00
+#define MPU3050_DLPF_CFG_188HZ		0x01
+#define MPU3050_DLPF_CFG_98HZ		0x02
+#define MPU3050_DLPF_CFG_42HZ		0x03
+#define MPU3050_DLPF_CFG_20HZ		0x04
+#define MPU3050_DLPF_CFG_10HZ		0x05
+#define MPU3050_DLPF_CFG_5HZ		0x06
+#define MPU3050_DLPF_CFG_2100HZ_NOLPF	0x07
+#define MPU3050_DLPF_CFG_MASK		0x07
+#define MPU3050_DLPF_CFG_SHIFT		0
+
+/* Interrupt config */
+#define MPU3050_INT_RAW_RDY_EN		BIT(0)
+#define MPU3050_INT_DMP_DONE_EN		BIT(1)
+#define MPU3050_INT_MPU_RDY_EN		BIT(2)
+#define MPU3050_INT_ANYRD_2CLEAR	BIT(4)
+#define MPU3050_INT_LATCH_EN		BIT(5)
+#define MPU3050_INT_OPEN		BIT(6)
+#define MPU3050_INT_ACTL		BIT(7)
+/* Interrupt status */
+#define MPU3050_INT_STATUS_RAW_RDY	BIT(0)
+#define MPU3050_INT_STATUS_DMP_DONE	BIT(1)
+#define MPU3050_INT_STATUS_MPU_RDY	BIT(2)
+#define MPU3050_INT_STATUS_FIFO_OVFLW	BIT(7)
+/* USR_CTRL */
+#define MPU3050_USR_CTRL_FIFO_EN	BIT(6)
+#define MPU3050_USR_CTRL_AUX_IF_EN	BIT(5)
+#define MPU3050_USR_CTRL_AUX_IF_RST	BIT(3)
+#define MPU3050_USR_CTRL_FIFO_RST	BIT(1)
+#define MPU3050_USR_CTRL_GYRO_RST	BIT(0)
+/* PWR_MGM */
+#define MPU3050_PWR_MGM_PLL_X		0x01
+#define MPU3050_PWR_MGM_PLL_Y		0x02
+#define MPU3050_PWR_MGM_PLL_Z		0x03
+#define MPU3050_PWR_MGM_CLKSEL_MASK	0x07
+#define MPU3050_PWR_MGM_STBY_ZG		BIT(3)
+#define MPU3050_PWR_MGM_STBY_YG		BIT(4)
+#define MPU3050_PWR_MGM_STBY_XG		BIT(5)
+#define MPU3050_PWR_MGM_SLEEP		BIT(6)
+#define MPU3050_PWR_MGM_RESET		BIT(7)
+#define MPU3050_PWR_MGM_MASK		0xff
+
+/*
+ * Fullscale precision is (for finest precision) +/- 250 deg/s, so the full
+ * scale is actually 500 deg/s. All 16 bits are then used to cover this scale,
+ * in two's complement.
+ */
+static unsigned int mpu3050_fs_precision[] = {
+	IIO_DEGREE_TO_RAD(250),
+	IIO_DEGREE_TO_RAD(500),
+	IIO_DEGREE_TO_RAD(1000),
+	IIO_DEGREE_TO_RAD(2000)
+};
+
+/*
+ * Regulator names
+ */
+static const char mpu3050_reg_vdd[] = "vdd";
+static const char mpu3050_reg_vlogic[] = "vlogic";
+
+static unsigned int mpu3050_get_freq(struct mpu3050 *mpu3050)
+{
+	unsigned int freq;
+
+	if (mpu3050->lpf == MPU3050_DLPF_CFG_256HZ_NOLPF2)
+		freq = 8000;
+	else
+		freq = 1000;
+	freq /= (mpu3050->divisor + 1);
+
+	return freq;
+}
+
+static int mpu3050_start_sampling(struct mpu3050 *mpu3050)
+{
+	__be16 raw_val[3];
+	int ret;
+	int i;
+
+	/* Reset */
+	ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM,
+				 MPU3050_PWR_MGM_RESET, MPU3050_PWR_MGM_RESET);
+	if (ret)
+		return ret;
+
+	/* Turn on the Z-axis PLL */
+	ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM,
+				 MPU3050_PWR_MGM_CLKSEL_MASK,
+				 MPU3050_PWR_MGM_PLL_Z);
+	if (ret)
+		return ret;
+
+	/* Write calibration offset registers */
+	for (i = 0; i < 3; i++)
+		raw_val[i] = cpu_to_be16(mpu3050->calibration[i]);
+
+	ret = regmap_bulk_write(mpu3050->map, MPU3050_X_OFFS_USR_H, raw_val,
+				sizeof(raw_val));
+	if (ret)
+		return ret;
+
+	/* Set low pass filter (sample rate), sync and full scale */
+	ret = regmap_write(mpu3050->map, MPU3050_DLPF_FS_SYNC,
+			   MPU3050_EXT_SYNC_NONE << MPU3050_EXT_SYNC_SHIFT |
+			   mpu3050->fullscale << MPU3050_FS_SHIFT |
+			   mpu3050->lpf << MPU3050_DLPF_CFG_SHIFT);
+	if (ret)
+		return ret;
+
+	/* Set up sampling frequency */
+	ret = regmap_write(mpu3050->map, MPU3050_SMPLRT_DIV, mpu3050->divisor);
+	if (ret)
+		return ret;
+
+	/*
+	 * Max 50 ms start-up time after setting DLPF_FS_SYNC
+	 * according to the data sheet, then wait for the next sample
+	 * at this frequency T = 1000/f ms.
+	 */
+	msleep(50 + 1000 / mpu3050_get_freq(mpu3050));
+
+	return 0;
+}
+
+static int mpu3050_set_8khz_samplerate(struct mpu3050 *mpu3050)
+{
+	int ret;
+	u8 divisor;
+	enum mpu3050_lpf lpf;
+
+	lpf = mpu3050->lpf;
+	divisor = mpu3050->divisor;
+
+	mpu3050->lpf = LPF_256_HZ_NOLPF; /* 8 kHz base frequency */
+	mpu3050->divisor = 0; /* Divide by 1 */
+	ret = mpu3050_start_sampling(mpu3050);
+
+	mpu3050->lpf = lpf;
+	mpu3050->divisor = divisor;
+
+	return ret;
+}
+
+static int mpu3050_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *chan,
+			    int *val, int *val2,
+			    long mask)
+{
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	int ret;
+	__be16 raw_val;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_OFFSET:
+		switch (chan->type) {
+		case IIO_TEMP:
+			/*
+			 * The temperature scaling is (x+23000)/280 Celsius
+			 * for the "best fit straight line" temperature range
+			 * of -30C..85C.  The 23000 includes room temperature
+			 * offset of +35C, 280 is the precision scale and x is
+			 * the 16-bit signed integer reported by hardware.
+			 *
+			 * Temperature value itself represents temperature of
+			 * the sensor die.
+			 */
+			*val = 23000;
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_CALIBBIAS:
+		switch (chan->type) {
+		case IIO_ANGL_VEL:
+			*val = mpu3050->calibration[chan->scan_index-1];
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = mpu3050_get_freq(mpu3050);
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		switch (chan->type) {
+		case IIO_TEMP:
+			/* Millidegrees, see about temperature scaling above */
+			*val = 1000;
+			*val2 = 280;
+			return IIO_VAL_FRACTIONAL;
+		case IIO_ANGL_VEL:
+			/*
+			 * Convert to the corresponding full scale in
+			 * radians. All 16 bits are used with sign to
+			 * span the available scale: to account for the one
+			 * missing value if we multiply by 1/S16_MAX, instead
+			 * multiply with 2/U16_MAX.
+			 */
+			*val = mpu3050_fs_precision[mpu3050->fullscale] * 2;
+			*val2 = U16_MAX;
+			return IIO_VAL_FRACTIONAL;
+		default:
+			return -EINVAL;
+		}
+	case IIO_CHAN_INFO_RAW:
+		/* Resume device */
+		pm_runtime_get_sync(mpu3050->dev);
+		mutex_lock(&mpu3050->lock);
+
+		ret = mpu3050_set_8khz_samplerate(mpu3050);
+		if (ret)
+			goto out_read_raw_unlock;
+
+		switch (chan->type) {
+		case IIO_TEMP:
+			ret = regmap_bulk_read(mpu3050->map, MPU3050_TEMP_H,
+					       &raw_val, sizeof(raw_val));
+			if (ret) {
+				dev_err(mpu3050->dev,
+					"error reading temperature\n");
+				goto out_read_raw_unlock;
+			}
+
+			*val = (s16)be16_to_cpu(raw_val);
+			ret = IIO_VAL_INT;
+
+			goto out_read_raw_unlock;
+		case IIO_ANGL_VEL:
+			ret = regmap_bulk_read(mpu3050->map,
+				       MPU3050_AXIS_REGS(chan->scan_index-1),
+				       &raw_val,
+				       sizeof(raw_val));
+			if (ret) {
+				dev_err(mpu3050->dev,
+					"error reading axis data\n");
+				goto out_read_raw_unlock;
+			}
+
+			*val = be16_to_cpu(raw_val);
+			ret = IIO_VAL_INT;
+
+			goto out_read_raw_unlock;
+		default:
+			ret = -EINVAL;
+			goto out_read_raw_unlock;
+		}
+	default:
+		break;
+	}
+
+	return -EINVAL;
+
+out_read_raw_unlock:
+	mutex_unlock(&mpu3050->lock);
+	pm_runtime_mark_last_busy(mpu3050->dev);
+	pm_runtime_put_autosuspend(mpu3050->dev);
+
+	return ret;
+}
+
+static int mpu3050_write_raw(struct iio_dev *indio_dev,
+			     const struct iio_chan_spec *chan,
+			     int val, int val2, long mask)
+{
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	/*
+	 * Couldn't figure out a way to precalculate these at compile time.
+	 */
+	unsigned int fs250 =
+		DIV_ROUND_CLOSEST(mpu3050_fs_precision[0] * 1000000 * 2,
+				  U16_MAX);
+	unsigned int fs500 =
+		DIV_ROUND_CLOSEST(mpu3050_fs_precision[1] * 1000000 * 2,
+				  U16_MAX);
+	unsigned int fs1000 =
+		DIV_ROUND_CLOSEST(mpu3050_fs_precision[2] * 1000000 * 2,
+				  U16_MAX);
+	unsigned int fs2000 =
+		DIV_ROUND_CLOSEST(mpu3050_fs_precision[3] * 1000000 * 2,
+				  U16_MAX);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_CALIBBIAS:
+		if (chan->type != IIO_ANGL_VEL)
+			return -EINVAL;
+		mpu3050->calibration[chan->scan_index-1] = val;
+		return 0;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		/*
+		 * The max samplerate is 8000 Hz, the minimum
+		 * 1000 / 256 ~= 4 Hz
+		 */
+		if (val < 4 || val > 8000)
+			return -EINVAL;
+
+		/*
+		 * Above 1000 Hz we must turn off the digital low pass filter
+		 * so we get a base frequency of 8kHz to the divider
+		 */
+		if (val > 1000) {
+			mpu3050->lpf = LPF_256_HZ_NOLPF;
+			mpu3050->divisor = DIV_ROUND_CLOSEST(8000, val) - 1;
+			return 0;
+		}
+
+		mpu3050->lpf = LPF_188_HZ;
+		mpu3050->divisor = DIV_ROUND_CLOSEST(1000, val) - 1;
+		return 0;
+	case IIO_CHAN_INFO_SCALE:
+		if (chan->type != IIO_ANGL_VEL)
+			return -EINVAL;
+		/*
+		 * We support +/-250, +/-500, +/-1000 and +/2000 deg/s
+		 * which means we need to round to the closest radians
+		 * which will be roughly +/-4.3, +/-8.7, +/-17.5, +/-35
+		 * rad/s. The scale is then for the 16 bits used to cover
+		 * it 2/(2^16) of that.
+		 */
+
+		/* Just too large, set the max range */
+		if (val != 0) {
+			mpu3050->fullscale = FS_2000_DPS;
+			return 0;
+		}
+
+		/*
+		 * Now we're dealing with fractions below zero in millirad/s
+		 * do some integer interpolation and match with the closest
+		 * fullscale in the table.
+		 */
+		if (val2 <= fs250 ||
+		    val2 < ((fs500 + fs250) / 2))
+			mpu3050->fullscale = FS_250_DPS;
+		else if (val2 <= fs500 ||
+			 val2 < ((fs1000 + fs500) / 2))
+			mpu3050->fullscale = FS_500_DPS;
+		else if (val2 <= fs1000 ||
+			 val2 < ((fs2000 + fs1000) / 2))
+			mpu3050->fullscale = FS_1000_DPS;
+		else
+			/* Catch-all */
+			mpu3050->fullscale = FS_2000_DPS;
+		return 0;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static irqreturn_t mpu3050_trigger_handler(int irq, void *p)
+{
+	const struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	int ret;
+	struct {
+		__be16 chans[4];
+		s64 timestamp __aligned(8);
+	} scan;
+	s64 timestamp;
+	unsigned int datums_from_fifo = 0;
+
+	/*
+	 * If we're using the hardware trigger, get the precise timestamp from
+	 * the top half of the threaded IRQ handler. Otherwise get the
+	 * timestamp here so it will be close in time to the actual values
+	 * read from the registers.
+	 */
+	if (iio_trigger_using_own(indio_dev))
+		timestamp = mpu3050->hw_timestamp;
+	else
+		timestamp = iio_get_time_ns(indio_dev);
+
+	mutex_lock(&mpu3050->lock);
+
+	/* Using the hardware IRQ trigger? Check the buffer then. */
+	if (mpu3050->hw_irq_trigger) {
+		__be16 raw_fifocnt;
+		u16 fifocnt;
+		/* X, Y, Z + temperature */
+		unsigned int bytes_per_datum = 8;
+		bool fifo_overflow = false;
+
+		ret = regmap_bulk_read(mpu3050->map,
+				       MPU3050_FIFO_COUNT_H,
+				       &raw_fifocnt,
+				       sizeof(raw_fifocnt));
+		if (ret)
+			goto out_trigger_unlock;
+		fifocnt = be16_to_cpu(raw_fifocnt);
+
+		if (fifocnt == 512) {
+			dev_info(mpu3050->dev,
+				 "FIFO overflow! Emptying and resetting FIFO\n");
+			fifo_overflow = true;
+			/* Reset and enable the FIFO */
+			ret = regmap_update_bits(mpu3050->map,
+						 MPU3050_USR_CTRL,
+						 MPU3050_USR_CTRL_FIFO_EN |
+						 MPU3050_USR_CTRL_FIFO_RST,
+						 MPU3050_USR_CTRL_FIFO_EN |
+						 MPU3050_USR_CTRL_FIFO_RST);
+			if (ret) {
+				dev_info(mpu3050->dev, "error resetting FIFO\n");
+				goto out_trigger_unlock;
+			}
+			mpu3050->pending_fifo_footer = false;
+		}
+
+		if (fifocnt)
+			dev_dbg(mpu3050->dev,
+				"%d bytes in the FIFO\n",
+				fifocnt);
+
+		while (!fifo_overflow && fifocnt > bytes_per_datum) {
+			unsigned int toread;
+			unsigned int offset;
+			__be16 fifo_values[5];
+
+			/*
+			 * If there is a FIFO footer in the pipe, first clear
+			 * that out. This follows the complex algorithm in the
+			 * datasheet that states that you may never leave the
+			 * FIFO empty after the first reading: you have to
+			 * always leave two footer bytes in it. The footer is
+			 * in practice just two zero bytes.
+			 */
+			if (mpu3050->pending_fifo_footer) {
+				toread = bytes_per_datum + 2;
+				offset = 0;
+			} else {
+				toread = bytes_per_datum;
+				offset = 1;
+				/* Put in some dummy value */
+				fifo_values[0] = cpu_to_be16(0xAAAA);
+			}
+
+			ret = regmap_bulk_read(mpu3050->map,
+					       MPU3050_FIFO_R,
+					       &fifo_values[offset],
+					       toread);
+			if (ret)
+				goto out_trigger_unlock;
+
+			dev_dbg(mpu3050->dev,
+				"%04x %04x %04x %04x %04x\n",
+				fifo_values[0],
+				fifo_values[1],
+				fifo_values[2],
+				fifo_values[3],
+				fifo_values[4]);
+
+			/* Index past the footer (fifo_values[0]) and push */
+			iio_push_to_buffers_with_ts_unaligned(indio_dev,
+							      &fifo_values[1],
+							      sizeof(__be16) * 4,
+							      timestamp);
+
+			fifocnt -= toread;
+			datums_from_fifo++;
+			mpu3050->pending_fifo_footer = true;
+
+			/*
+			 * If we're emptying the FIFO, just make sure to
+			 * check if something new appeared.
+			 */
+			if (fifocnt < bytes_per_datum) {
+				ret = regmap_bulk_read(mpu3050->map,
+						       MPU3050_FIFO_COUNT_H,
+						       &raw_fifocnt,
+						       sizeof(raw_fifocnt));
+				if (ret)
+					goto out_trigger_unlock;
+				fifocnt = be16_to_cpu(raw_fifocnt);
+			}
+
+			if (fifocnt < bytes_per_datum)
+				dev_dbg(mpu3050->dev,
+					"%d bytes left in the FIFO\n",
+					fifocnt);
+
+			/*
+			 * At this point, the timestamp that triggered the
+			 * hardware interrupt is no longer valid for what
+			 * we are reading (the interrupt likely fired for
+			 * the value on the top of the FIFO), so set the
+			 * timestamp to zero and let userspace deal with it.
+			 */
+			timestamp = 0;
+		}
+	}
+
+	/*
+	 * If we picked some datums from the FIFO that's enough, else
+	 * fall through and just read from the current value registers.
+	 * This happens in two cases:
+	 *
+	 * - We are using some other trigger (external, like an HRTimer)
+	 *   than the sensor's own sample generator. In this case the
+	 *   sensor is just set to the max sampling frequency and we give
+	 *   the trigger a copy of the latest value every time we get here.
+	 *
+	 * - The hardware trigger is active but unused and we actually use
+	 *   another trigger which calls here with a frequency higher
+	 *   than what the device provides data. We will then just read
+	 *   duplicate values directly from the hardware registers.
+	 */
+	if (datums_from_fifo) {
+		dev_dbg(mpu3050->dev,
+			"read %d datums from the FIFO\n",
+			datums_from_fifo);
+		goto out_trigger_unlock;
+	}
+
+	ret = regmap_bulk_read(mpu3050->map, MPU3050_TEMP_H, scan.chans,
+			       sizeof(scan.chans));
+	if (ret) {
+		dev_err(mpu3050->dev,
+			"error reading axis data\n");
+		goto out_trigger_unlock;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &scan, timestamp);
+
+out_trigger_unlock:
+	mutex_unlock(&mpu3050->lock);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int mpu3050_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+
+	pm_runtime_get_sync(mpu3050->dev);
+
+	/* Unless we have OUR trigger active, run at full speed */
+	if (!mpu3050->hw_irq_trigger)
+		return mpu3050_set_8khz_samplerate(mpu3050);
+
+	return 0;
+}
+
+static int mpu3050_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+
+	pm_runtime_mark_last_busy(mpu3050->dev);
+	pm_runtime_put_autosuspend(mpu3050->dev);
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops mpu3050_buffer_setup_ops = {
+	.preenable = mpu3050_buffer_preenable,
+	.postdisable = mpu3050_buffer_postdisable,
+};
+
+static const struct iio_mount_matrix *
+mpu3050_get_mount_matrix(const struct iio_dev *indio_dev,
+			 const struct iio_chan_spec *chan)
+{
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+
+	return &mpu3050->orientation;
+}
+
+static const struct iio_chan_spec_ext_info mpu3050_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_TYPE, mpu3050_get_mount_matrix),
+	{ },
+};
+
+#define MPU3050_AXIS_CHANNEL(axis, index)				\
+	{								\
+		.type = IIO_ANGL_VEL,					\
+		.modified = 1,						\
+		.channel2 = IIO_MOD_##axis,				\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		\
+			BIT(IIO_CHAN_INFO_CALIBBIAS),			\
+		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),	\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\
+		.ext_info = mpu3050_ext_info,				\
+		.scan_index = index,					\
+		.scan_type = {						\
+			.sign = 's',					\
+			.realbits = 16,					\
+			.storagebits = 16,				\
+			.endianness = IIO_BE,				\
+		},							\
+	}
+
+static const struct iio_chan_spec mpu3050_channels[] = {
+	{
+		.type = IIO_TEMP,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE) |
+				      BIT(IIO_CHAN_INFO_OFFSET),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	MPU3050_AXIS_CHANNEL(X, 1),
+	MPU3050_AXIS_CHANNEL(Y, 2),
+	MPU3050_AXIS_CHANNEL(Z, 3),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+/* Four channels apart from timestamp, scan mask = 0x0f */
+static const unsigned long mpu3050_scan_masks[] = { 0xf, 0 };
+
+/*
+ * These are just the hardcoded factors resulting from the more elaborate
+ * calculations done with fractions in the scale raw get/set functions.
+ */
+static IIO_CONST_ATTR(anglevel_scale_available,
+		      "0.000122070 "
+		      "0.000274658 "
+		      "0.000518798 "
+		      "0.001068115");
+
+static struct attribute *mpu3050_attributes[] = {
+	&iio_const_attr_anglevel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group mpu3050_attribute_group = {
+	.attrs = mpu3050_attributes,
+};
+
+static const struct iio_info mpu3050_info = {
+	.read_raw = mpu3050_read_raw,
+	.write_raw = mpu3050_write_raw,
+	.attrs = &mpu3050_attribute_group,
+};
+
+/**
+ * mpu3050_read_mem() - read MPU-3050 internal memory
+ * @mpu3050: device to read from
+ * @bank: target bank
+ * @addr: target address
+ * @len: number of bytes
+ * @buf: the buffer to store the read bytes in
+ */
+static int mpu3050_read_mem(struct mpu3050 *mpu3050,
+			    u8 bank,
+			    u8 addr,
+			    u8 len,
+			    u8 *buf)
+{
+	int ret;
+
+	ret = regmap_write(mpu3050->map,
+			   MPU3050_BANK_SEL,
+			   bank);
+	if (ret)
+		return ret;
+
+	ret = regmap_write(mpu3050->map,
+			   MPU3050_MEM_START_ADDR,
+			   addr);
+	if (ret)
+		return ret;
+
+	return regmap_bulk_read(mpu3050->map,
+				MPU3050_MEM_R_W,
+				buf,
+				len);
+}
+
+static int mpu3050_hw_init(struct mpu3050 *mpu3050)
+{
+	int ret;
+	__le64 otp_le;
+	u64 otp;
+
+	/* Reset */
+	ret = regmap_update_bits(mpu3050->map,
+				 MPU3050_PWR_MGM,
+				 MPU3050_PWR_MGM_RESET,
+				 MPU3050_PWR_MGM_RESET);
+	if (ret)
+		return ret;
+
+	/* Turn on the PLL */
+	ret = regmap_update_bits(mpu3050->map,
+				 MPU3050_PWR_MGM,
+				 MPU3050_PWR_MGM_CLKSEL_MASK,
+				 MPU3050_PWR_MGM_PLL_Z);
+	if (ret)
+		return ret;
+
+	/* Disable IRQs */
+	ret = regmap_write(mpu3050->map,
+			   MPU3050_INT_CFG,
+			   0);
+	if (ret)
+		return ret;
+
+	/* Read out the 8 bytes of OTP (one-time-programmable) memory */
+	ret = mpu3050_read_mem(mpu3050,
+			       (MPU3050_MEM_PRFTCH |
+				MPU3050_MEM_USER_BANK |
+				MPU3050_MEM_OTP_BANK_0),
+			       0,
+			       sizeof(otp_le),
+			       (u8 *)&otp_le);
+	if (ret)
+		return ret;
+
+	/* This is device-unique data so it goes into the entropy pool */
+	add_device_randomness(&otp_le, sizeof(otp_le));
+
+	otp = le64_to_cpu(otp_le);
+
+	dev_info(mpu3050->dev,
+		 "die ID: %04llX, wafer ID: %02llX, A lot ID: %04llX, "
+		 "W lot ID: %03llX, WP ID: %01llX, rev ID: %02llX\n",
+		 /* Die ID, bits 0-12 */
+		 FIELD_GET(GENMASK_ULL(12, 0), otp),
+		 /* Wafer ID, bits 13-17 */
+		 FIELD_GET(GENMASK_ULL(17, 13), otp),
+		 /* A lot ID, bits 18-33 */
+		 FIELD_GET(GENMASK_ULL(33, 18), otp),
+		 /* W lot ID, bits 34-45 */
+		 FIELD_GET(GENMASK_ULL(45, 34), otp),
+		 /* WP ID, bits 47-49 */
+		 FIELD_GET(GENMASK_ULL(49, 47), otp),
+		 /* rev ID, bits 50-55 */
+		 FIELD_GET(GENMASK_ULL(55, 50), otp));
+
+	return 0;
+}
+
+static int mpu3050_power_up(struct mpu3050 *mpu3050)
+{
+	int ret;
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(mpu3050->regs), mpu3050->regs);
+	if (ret) {
+		dev_err(mpu3050->dev, "cannot enable regulators\n");
+		return ret;
+	}
+	/*
+	 * 20-100 ms start-up time for register read/write according to
+	 * the datasheet, be on the safe side and wait 200 ms.
+	 */
+	msleep(200);
+
+	/* Take device out of sleep mode */
+	ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM,
+				 MPU3050_PWR_MGM_SLEEP, 0);
+	if (ret) {
+		regulator_bulk_disable(ARRAY_SIZE(mpu3050->regs), mpu3050->regs);
+		dev_err(mpu3050->dev, "error setting power mode\n");
+		return ret;
+	}
+	usleep_range(10000, 20000);
+
+	return 0;
+}
+
+static int mpu3050_power_down(struct mpu3050 *mpu3050)
+{
+	int ret;
+
+	/*
+	 * Put MPU-3050 into sleep mode before cutting regulators.
+	 * This is important, because we may not be the sole user
+	 * of the regulator so the power may stay on after this, and
+	 * then we would be wasting power unless we go to sleep mode
+	 * first.
+	 */
+	ret = regmap_update_bits(mpu3050->map, MPU3050_PWR_MGM,
+				 MPU3050_PWR_MGM_SLEEP, MPU3050_PWR_MGM_SLEEP);
+	if (ret)
+		dev_err(mpu3050->dev, "error putting to sleep\n");
+
+	ret = regulator_bulk_disable(ARRAY_SIZE(mpu3050->regs), mpu3050->regs);
+	if (ret)
+		dev_err(mpu3050->dev, "error disabling regulators\n");
+
+	return 0;
+}
+
+static irqreturn_t mpu3050_irq_handler(int irq, void *p)
+{
+	struct iio_trigger *trig = p;
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+
+	if (!mpu3050->hw_irq_trigger)
+		return IRQ_NONE;
+
+	/* Get the time stamp as close in time as possible */
+	mpu3050->hw_timestamp = iio_get_time_ns(indio_dev);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t mpu3050_irq_thread(int irq, void *p)
+{
+	struct iio_trigger *trig = p;
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	unsigned int val;
+	int ret;
+
+	/* ACK IRQ and check if it was from us */
+	ret = regmap_read(mpu3050->map, MPU3050_INT_STATUS, &val);
+	if (ret) {
+		dev_err(mpu3050->dev, "error reading IRQ status\n");
+		return IRQ_HANDLED;
+	}
+	if (!(val & MPU3050_INT_STATUS_RAW_RDY))
+		return IRQ_NONE;
+
+	iio_trigger_poll_chained(p);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * mpu3050_drdy_trigger_set_state() - set data ready interrupt state
+ * @trig: trigger instance
+ * @enable: true if trigger should be enabled, false to disable
+ */
+static int mpu3050_drdy_trigger_set_state(struct iio_trigger *trig,
+					  bool enable)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	unsigned int val;
+	int ret;
+
+	/* Disabling trigger: disable interrupt and return */
+	if (!enable) {
+		/* Disable all interrupts */
+		ret = regmap_write(mpu3050->map,
+				   MPU3050_INT_CFG,
+				   0);
+		if (ret)
+			dev_err(mpu3050->dev, "error disabling IRQ\n");
+
+		/* Clear IRQ flag */
+		ret = regmap_read(mpu3050->map, MPU3050_INT_STATUS, &val);
+		if (ret)
+			dev_err(mpu3050->dev, "error clearing IRQ status\n");
+
+		/* Disable all things in the FIFO and reset it */
+		ret = regmap_write(mpu3050->map, MPU3050_FIFO_EN, 0);
+		if (ret)
+			dev_err(mpu3050->dev, "error disabling FIFO\n");
+
+		ret = regmap_write(mpu3050->map, MPU3050_USR_CTRL,
+				   MPU3050_USR_CTRL_FIFO_RST);
+		if (ret)
+			dev_err(mpu3050->dev, "error resetting FIFO\n");
+
+		pm_runtime_mark_last_busy(mpu3050->dev);
+		pm_runtime_put_autosuspend(mpu3050->dev);
+		mpu3050->hw_irq_trigger = false;
+
+		return 0;
+	} else {
+		/* Else we're enabling the trigger from this point */
+		pm_runtime_get_sync(mpu3050->dev);
+		mpu3050->hw_irq_trigger = true;
+
+		/* Disable all things in the FIFO */
+		ret = regmap_write(mpu3050->map, MPU3050_FIFO_EN, 0);
+		if (ret)
+			return ret;
+
+		/* Reset and enable the FIFO */
+		ret = regmap_update_bits(mpu3050->map, MPU3050_USR_CTRL,
+					 MPU3050_USR_CTRL_FIFO_EN |
+					 MPU3050_USR_CTRL_FIFO_RST,
+					 MPU3050_USR_CTRL_FIFO_EN |
+					 MPU3050_USR_CTRL_FIFO_RST);
+		if (ret)
+			return ret;
+
+		mpu3050->pending_fifo_footer = false;
+
+		/* Turn on the FIFO for temp+X+Y+Z */
+		ret = regmap_write(mpu3050->map, MPU3050_FIFO_EN,
+				   MPU3050_FIFO_EN_TEMP_OUT |
+				   MPU3050_FIFO_EN_GYRO_XOUT |
+				   MPU3050_FIFO_EN_GYRO_YOUT |
+				   MPU3050_FIFO_EN_GYRO_ZOUT |
+				   MPU3050_FIFO_EN_FOOTER);
+		if (ret)
+			return ret;
+
+		/* Configure the sample engine */
+		ret = mpu3050_start_sampling(mpu3050);
+		if (ret)
+			return ret;
+
+		/* Clear IRQ flag */
+		ret = regmap_read(mpu3050->map, MPU3050_INT_STATUS, &val);
+		if (ret)
+			dev_err(mpu3050->dev, "error clearing IRQ status\n");
+
+		/* Give us interrupts whenever there is new data ready */
+		val = MPU3050_INT_RAW_RDY_EN;
+
+		if (mpu3050->irq_actl)
+			val |= MPU3050_INT_ACTL;
+		if (mpu3050->irq_latch)
+			val |= MPU3050_INT_LATCH_EN;
+		if (mpu3050->irq_opendrain)
+			val |= MPU3050_INT_OPEN;
+
+		ret = regmap_write(mpu3050->map, MPU3050_INT_CFG, val);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+static const struct iio_trigger_ops mpu3050_trigger_ops = {
+	.set_trigger_state = mpu3050_drdy_trigger_set_state,
+};
+
+static int mpu3050_trigger_probe(struct iio_dev *indio_dev, int irq)
+{
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+	struct device *dev = mpu3050->dev;
+	unsigned long irq_trig;
+	int ret;
+
+	mpu3050->trig = devm_iio_trigger_alloc(&indio_dev->dev,
+					       "%s-dev%d",
+					       indio_dev->name,
+					       iio_device_id(indio_dev));
+	if (!mpu3050->trig)
+		return -ENOMEM;
+
+	/* Check if IRQ is open drain */
+	mpu3050->irq_opendrain = device_property_read_bool(dev, "drive-open-drain");
+
+	irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq));
+	/*
+	 * Configure the interrupt generator hardware to supply whatever
+	 * the interrupt is configured for, edges low/high level low/high,
+	 * we can provide it all.
+	 */
+	switch (irq_trig) {
+	case IRQF_TRIGGER_RISING:
+		dev_info(&indio_dev->dev,
+			 "pulse interrupts on the rising edge\n");
+		break;
+	case IRQF_TRIGGER_FALLING:
+		mpu3050->irq_actl = true;
+		dev_info(&indio_dev->dev,
+			 "pulse interrupts on the falling edge\n");
+		break;
+	case IRQF_TRIGGER_HIGH:
+		mpu3050->irq_latch = true;
+		dev_info(&indio_dev->dev,
+			 "interrupts active high level\n");
+		/*
+		 * With level IRQs, we mask the IRQ until it is processed,
+		 * but with edge IRQs (pulses) we can queue several interrupts
+		 * in the top half.
+		 */
+		irq_trig |= IRQF_ONESHOT;
+		break;
+	case IRQF_TRIGGER_LOW:
+		mpu3050->irq_latch = true;
+		mpu3050->irq_actl = true;
+		irq_trig |= IRQF_ONESHOT;
+		dev_info(&indio_dev->dev,
+			 "interrupts active low level\n");
+		break;
+	default:
+		/* This is the most preferred mode, if possible */
+		dev_err(&indio_dev->dev,
+			"unsupported IRQ trigger specified (%lx), enforce "
+			"rising edge\n", irq_trig);
+		irq_trig = IRQF_TRIGGER_RISING;
+		break;
+	}
+
+	/* An open drain line can be shared with several devices */
+	if (mpu3050->irq_opendrain)
+		irq_trig |= IRQF_SHARED;
+
+	ret = request_threaded_irq(irq,
+				   mpu3050_irq_handler,
+				   mpu3050_irq_thread,
+				   irq_trig,
+				   mpu3050->trig->name,
+				   mpu3050->trig);
+	if (ret) {
+		dev_err(dev, "can't get IRQ %d, error %d\n", irq, ret);
+		return ret;
+	}
+
+	mpu3050->irq = irq;
+	mpu3050->trig->dev.parent = dev;
+	mpu3050->trig->ops = &mpu3050_trigger_ops;
+	iio_trigger_set_drvdata(mpu3050->trig, indio_dev);
+
+	ret = iio_trigger_register(mpu3050->trig);
+	if (ret)
+		return ret;
+
+	indio_dev->trig = iio_trigger_get(mpu3050->trig);
+
+	return 0;
+}
+
+int mpu3050_common_probe(struct device *dev,
+			 struct regmap *map,
+			 int irq,
+			 const char *name)
+{
+	struct iio_dev *indio_dev;
+	struct mpu3050 *mpu3050;
+	unsigned int val;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*mpu3050));
+	if (!indio_dev)
+		return -ENOMEM;
+	mpu3050 = iio_priv(indio_dev);
+
+	mpu3050->dev = dev;
+	mpu3050->map = map;
+	mutex_init(&mpu3050->lock);
+	/* Default fullscale: 2000 degrees per second */
+	mpu3050->fullscale = FS_2000_DPS;
+	/* 1 kHz, divide by 100, default frequency = 10 Hz */
+	mpu3050->lpf = MPU3050_DLPF_CFG_188HZ;
+	mpu3050->divisor = 99;
+
+	/* Read the mounting matrix, if present */
+	ret = iio_read_mount_matrix(dev, &mpu3050->orientation);
+	if (ret)
+		return ret;
+
+	/* Fetch and turn on regulators */
+	mpu3050->regs[0].supply = mpu3050_reg_vdd;
+	mpu3050->regs[1].supply = mpu3050_reg_vlogic;
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(mpu3050->regs),
+				      mpu3050->regs);
+	if (ret) {
+		dev_err(dev, "Cannot get regulators\n");
+		return ret;
+	}
+
+	ret = mpu3050_power_up(mpu3050);
+	if (ret)
+		return ret;
+
+	ret = regmap_read(map, MPU3050_CHIP_ID_REG, &val);
+	if (ret) {
+		dev_err(dev, "could not read device ID\n");
+		ret = -ENODEV;
+
+		goto err_power_down;
+	}
+
+	if ((val & MPU3050_CHIP_ID_MASK) != MPU3050_CHIP_ID) {
+		dev_err(dev, "unsupported chip id %02x\n",
+				(u8)(val & MPU3050_CHIP_ID_MASK));
+		ret = -ENODEV;
+		goto err_power_down;
+	}
+
+	ret = regmap_read(map, MPU3050_PRODUCT_ID_REG, &val);
+	if (ret) {
+		dev_err(dev, "could not read device ID\n");
+		ret = -ENODEV;
+
+		goto err_power_down;
+	}
+	dev_info(dev, "found MPU-3050 part no: %d, version: %d\n",
+		 ((val >> 4) & 0xf), (val & 0xf));
+
+	ret = mpu3050_hw_init(mpu3050);
+	if (ret)
+		goto err_power_down;
+
+	indio_dev->channels = mpu3050_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mpu3050_channels);
+	indio_dev->info = &mpu3050_info;
+	indio_dev->available_scan_masks = mpu3050_scan_masks;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->name = name;
+
+	ret = iio_triggered_buffer_setup(indio_dev, iio_pollfunc_store_time,
+					 mpu3050_trigger_handler,
+					 &mpu3050_buffer_setup_ops);
+	if (ret) {
+		dev_err(dev, "triggered buffer setup failed\n");
+		goto err_power_down;
+	}
+
+	ret = iio_device_register(indio_dev);
+	if (ret) {
+		dev_err(dev, "device register failed\n");
+		goto err_cleanup_buffer;
+	}
+
+	dev_set_drvdata(dev, indio_dev);
+
+	/* Check if we have an assigned IRQ to use as trigger */
+	if (irq) {
+		ret = mpu3050_trigger_probe(indio_dev, irq);
+		if (ret)
+			dev_err(dev, "failed to register trigger\n");
+	}
+
+	/* Enable runtime PM */
+	pm_runtime_get_noresume(dev);
+	pm_runtime_set_active(dev);
+	pm_runtime_enable(dev);
+	/*
+	 * Set autosuspend to two orders of magnitude larger than the
+	 * start-up time. 100ms start-up time means 10000ms autosuspend,
+	 * i.e. 10 seconds.
+	 */
+	pm_runtime_set_autosuspend_delay(dev, 10000);
+	pm_runtime_use_autosuspend(dev);
+	pm_runtime_put(dev);
+
+	return 0;
+
+err_cleanup_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+err_power_down:
+	mpu3050_power_down(mpu3050);
+
+	return ret;
+}
+
+void mpu3050_common_remove(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+
+	pm_runtime_get_sync(dev);
+	pm_runtime_put_noidle(dev);
+	pm_runtime_disable(dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	if (mpu3050->irq)
+		free_irq(mpu3050->irq, mpu3050);
+	iio_device_unregister(indio_dev);
+	mpu3050_power_down(mpu3050);
+}
+
+static int mpu3050_runtime_suspend(struct device *dev)
+{
+	return mpu3050_power_down(iio_priv(dev_get_drvdata(dev)));
+}
+
+static int mpu3050_runtime_resume(struct device *dev)
+{
+	return mpu3050_power_up(iio_priv(dev_get_drvdata(dev)));
+}
+
+DEFINE_RUNTIME_DEV_PM_OPS(mpu3050_dev_pm_ops, mpu3050_runtime_suspend,
+			  mpu3050_runtime_resume, NULL);
+MODULE_AUTHOR("Linus Walleij");
+MODULE_DESCRIPTION("MPU3050 gyroscope driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/gyro/mpu3050-i2c.c b/drivers/iio/gyro/mpu3050-i2c.c
new file mode 100644
index 000000000..12e3afa9d
--- /dev/null
+++ b/drivers/iio/gyro/mpu3050-i2c.c
@@ -0,0 +1,124 @@
+// SPDX-License-Identifier: GPL-2.0-only
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/iio/iio.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/pm_runtime.h>
+
+#include "mpu3050.h"
+
+static const struct regmap_config mpu3050_i2c_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+};
+
+static int mpu3050_i2c_bypass_select(struct i2c_mux_core *mux, u32 chan_id)
+{
+	struct mpu3050 *mpu3050 = i2c_mux_priv(mux);
+
+	/* Just power up the device, that is all that is needed */
+	pm_runtime_get_sync(mpu3050->dev);
+	return 0;
+}
+
+static int mpu3050_i2c_bypass_deselect(struct i2c_mux_core *mux, u32 chan_id)
+{
+	struct mpu3050 *mpu3050 = i2c_mux_priv(mux);
+
+	pm_runtime_mark_last_busy(mpu3050->dev);
+	pm_runtime_put_autosuspend(mpu3050->dev);
+	return 0;
+}
+
+static int mpu3050_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	struct regmap *regmap;
+	const char *name;
+	struct mpu3050 *mpu3050;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_I2C_BLOCK))
+		return -EOPNOTSUPP;
+
+	if (id)
+		name = id->name;
+	else
+		return -ENODEV;
+
+	regmap = devm_regmap_init_i2c(client, &mpu3050_i2c_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "Failed to register i2c regmap: %pe\n",
+			regmap);
+		return PTR_ERR(regmap);
+	}
+
+	ret = mpu3050_common_probe(&client->dev, regmap, client->irq, name);
+	if (ret)
+		return ret;
+
+	/* The main driver is up, now register the I2C mux */
+	mpu3050 = iio_priv(dev_get_drvdata(&client->dev));
+	mpu3050->i2cmux = i2c_mux_alloc(client->adapter, &client->dev,
+					1, 0, I2C_MUX_LOCKED | I2C_MUX_GATE,
+					mpu3050_i2c_bypass_select,
+					mpu3050_i2c_bypass_deselect);
+	/* Just fail the mux, there is no point in killing the driver */
+	if (!mpu3050->i2cmux)
+		dev_err(&client->dev, "failed to allocate I2C mux\n");
+	else {
+		mpu3050->i2cmux->priv = mpu3050;
+		/* Ignore failure, not critical */
+		i2c_mux_add_adapter(mpu3050->i2cmux, 0, 0, 0);
+	}
+
+	return 0;
+}
+
+static void mpu3050_i2c_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(&client->dev);
+	struct mpu3050 *mpu3050 = iio_priv(indio_dev);
+
+	if (mpu3050->i2cmux)
+		i2c_mux_del_adapters(mpu3050->i2cmux);
+
+	mpu3050_common_remove(&client->dev);
+}
+
+/*
+ * device id table is used to identify what device can be
+ * supported by this driver
+ */
+static const struct i2c_device_id mpu3050_i2c_id[] = {
+	{ "mpu3050" },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, mpu3050_i2c_id);
+
+static const struct of_device_id mpu3050_i2c_of_match[] = {
+	{ .compatible = "invensense,mpu3050", .data = "mpu3050" },
+	/* Deprecated vendor ID from the Input driver */
+	{ .compatible = "invn,mpu3050", .data = "mpu3050" },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, mpu3050_i2c_of_match);
+
+static struct i2c_driver mpu3050_i2c_driver = {
+	.probe = mpu3050_i2c_probe,
+	.remove = mpu3050_i2c_remove,
+	.id_table = mpu3050_i2c_id,
+	.driver = {
+		.of_match_table = mpu3050_i2c_of_match,
+		.name = "mpu3050-i2c",
+		.pm = pm_ptr(&mpu3050_dev_pm_ops),
+	},
+};
+module_i2c_driver(mpu3050_i2c_driver);
+
+MODULE_AUTHOR("Linus Walleij");
+MODULE_DESCRIPTION("Invensense MPU3050 gyroscope driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/gyro/mpu3050.h b/drivers/iio/gyro/mpu3050.h
new file mode 100644
index 000000000..faf4168a3
--- /dev/null
+++ b/drivers/iio/gyro/mpu3050.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#include <linux/iio/iio.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/i2c.h>
+
+/**
+ * enum mpu3050_fullscale - indicates the full range of the sensor in deg/sec
+ */
+enum mpu3050_fullscale {
+	FS_250_DPS = 0,
+	FS_500_DPS,
+	FS_1000_DPS,
+	FS_2000_DPS,
+};
+
+/**
+ * enum mpu3050_lpf - indicates the low pass filter width
+ */
+enum mpu3050_lpf {
+	/* This implicity sets sample frequency to 8 kHz */
+	LPF_256_HZ_NOLPF = 0,
+	/* All others sets the sample frequency to 1 kHz */
+	LPF_188_HZ,
+	LPF_98_HZ,
+	LPF_42_HZ,
+	LPF_20_HZ,
+	LPF_10_HZ,
+	LPF_5_HZ,
+	LPF_2100_HZ_NOLPF,
+};
+
+enum mpu3050_axis {
+	AXIS_X = 0,
+	AXIS_Y,
+	AXIS_Z,
+	AXIS_MAX,
+};
+
+/**
+ * struct mpu3050 - instance state container for the device
+ * @dev: parent device for this instance
+ * @orientation: mounting matrix, flipped axis etc
+ * @map: regmap to reach the registers
+ * @lock: serialization lock to marshal all requests
+ * @irq: the IRQ used for this device
+ * @regs: the regulators to power this device
+ * @fullscale: the current fullscale setting for the device
+ * @lpf: digital low pass filter setting for the device
+ * @divisor: base frequency divider: divides 8 or 1 kHz
+ * @calibration: the three signed 16-bit calibration settings that
+ * get written into the offset registers for each axis to compensate
+ * for DC offsets
+ * @trig: trigger for the MPU-3050 interrupt, if present
+ * @hw_irq_trigger: hardware interrupt trigger is in use
+ * @irq_actl: interrupt is active low
+ * @irq_latch: latched IRQ, this means that it is a level IRQ
+ * @irq_opendrain: the interrupt line shall be configured open drain
+ * @pending_fifo_footer: tells us if there is a pending footer in the FIFO
+ * that we have to read out first when handling the FIFO
+ * @hw_timestamp: latest hardware timestamp from the trigger IRQ, when in
+ * use
+ * @i2cmux: an I2C mux reflecting the fact that this sensor is a hub with
+ * a pass-through I2C interface coming out of it: this device needs to be
+ * powered up in order to reach devices on the other side of this mux
+ */
+struct mpu3050 {
+	struct device *dev;
+	struct iio_mount_matrix orientation;
+	struct regmap *map;
+	struct mutex lock;
+	int irq;
+	struct regulator_bulk_data regs[2];
+	enum mpu3050_fullscale fullscale;
+	enum mpu3050_lpf lpf;
+	u8 divisor;
+	s16 calibration[3];
+	struct iio_trigger *trig;
+	bool hw_irq_trigger;
+	bool irq_actl;
+	bool irq_latch;
+	bool irq_opendrain;
+	bool pending_fifo_footer;
+	s64 hw_timestamp;
+	struct i2c_mux_core *i2cmux;
+};
+
+/* Probe called from different transports */
+int mpu3050_common_probe(struct device *dev,
+			 struct regmap *map,
+			 int irq,
+			 const char *name);
+void mpu3050_common_remove(struct device *dev);
+
+/* PM ops */
+extern const struct dev_pm_ops mpu3050_dev_pm_ops;
diff --git a/drivers/iio/gyro/ssp_gyro_sensor.c b/drivers/iio/gyro/ssp_gyro_sensor.c
new file mode 100644
index 000000000..d332474bc
--- /dev/null
+++ b/drivers/iio/gyro/ssp_gyro_sensor.c
@@ -0,0 +1,144 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
+ */
+
+#include <linux/iio/common/ssp_sensors.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include "../common/ssp_sensors/ssp_iio_sensor.h"
+
+#define SSP_CHANNEL_COUNT 3
+
+#define SSP_GYROSCOPE_NAME "ssp-gyroscope"
+static const char ssp_gyro_name[] = SSP_GYROSCOPE_NAME;
+
+enum ssp_gyro_3d_channel {
+	SSP_CHANNEL_SCAN_INDEX_X,
+	SSP_CHANNEL_SCAN_INDEX_Y,
+	SSP_CHANNEL_SCAN_INDEX_Z,
+	SSP_CHANNEL_SCAN_INDEX_TIME,
+};
+
+static int ssp_gyro_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, int *val,
+			     int *val2, long mask)
+{
+	u32 t;
+	struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		t = ssp_get_sensor_delay(data, SSP_GYROSCOPE_SENSOR);
+		ssp_convert_to_freq(t, val, val2);
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int ssp_gyro_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan, int val,
+			      int val2, long mask)
+{
+	int ret;
+	struct ssp_data *data = dev_get_drvdata(indio_dev->dev.parent->parent);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		ret = ssp_convert_to_time(val, val2);
+		ret = ssp_change_delay(data, SSP_GYROSCOPE_SENSOR, ret);
+		if (ret < 0)
+			dev_err(&indio_dev->dev, "gyro sensor enable fail\n");
+
+		return ret;
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct iio_info ssp_gyro_iio_info = {
+	.read_raw = &ssp_gyro_read_raw,
+	.write_raw = &ssp_gyro_write_raw,
+};
+
+static const unsigned long ssp_gyro_scan_mask[] = { 0x07, 0, };
+
+static const struct iio_chan_spec ssp_gyro_channels[] = {
+	SSP_CHANNEL_AG(IIO_ANGL_VEL, IIO_MOD_X, SSP_CHANNEL_SCAN_INDEX_X),
+	SSP_CHANNEL_AG(IIO_ANGL_VEL, IIO_MOD_Y, SSP_CHANNEL_SCAN_INDEX_Y),
+	SSP_CHANNEL_AG(IIO_ANGL_VEL, IIO_MOD_Z, SSP_CHANNEL_SCAN_INDEX_Z),
+	SSP_CHAN_TIMESTAMP(SSP_CHANNEL_SCAN_INDEX_TIME),
+};
+
+static int ssp_process_gyro_data(struct iio_dev *indio_dev, void *buf,
+				 int64_t timestamp)
+{
+	return ssp_common_process_data(indio_dev, buf, SSP_GYROSCOPE_SIZE,
+				       timestamp);
+}
+
+static const struct iio_buffer_setup_ops ssp_gyro_buffer_ops = {
+	.postenable = &ssp_common_buffer_postenable,
+	.postdisable = &ssp_common_buffer_postdisable,
+};
+
+static int ssp_gyro_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct iio_dev *indio_dev;
+	struct ssp_sensor_data *spd;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*spd));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	spd = iio_priv(indio_dev);
+
+	spd->process_data = ssp_process_gyro_data;
+	spd->type = SSP_GYROSCOPE_SENSOR;
+
+	indio_dev->name = ssp_gyro_name;
+	indio_dev->info = &ssp_gyro_iio_info;
+	indio_dev->channels = ssp_gyro_channels;
+	indio_dev->num_channels = ARRAY_SIZE(ssp_gyro_channels);
+	indio_dev->available_scan_masks = ssp_gyro_scan_mask;
+
+	ret = devm_iio_kfifo_buffer_setup(&pdev->dev, indio_dev,
+					  &ssp_gyro_buffer_ops);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	ret = devm_iio_device_register(&pdev->dev, indio_dev);
+	if (ret < 0)
+		return ret;
+
+	/* ssp registering should be done after all iio setup */
+	ssp_register_consumer(indio_dev, SSP_GYROSCOPE_SENSOR);
+
+	return 0;
+}
+
+static struct platform_driver ssp_gyro_driver = {
+	.driver = {
+		.name = SSP_GYROSCOPE_NAME,
+	},
+	.probe = ssp_gyro_probe,
+};
+
+module_platform_driver(ssp_gyro_driver);
+
+MODULE_AUTHOR("Karol Wrona <k.wrona@samsung.com>");
+MODULE_DESCRIPTION("Samsung sensorhub gyroscopes driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(IIO_SSP_SENSORS);
diff --git a/drivers/iio/gyro/st_gyro.h b/drivers/iio/gyro/st_gyro.h
new file mode 100644
index 000000000..f5332b6a0
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro.h
@@ -0,0 +1,39 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ * v. 1.0.0
+ */
+
+#ifndef ST_GYRO_H
+#define ST_GYRO_H
+
+#include <linux/types.h>
+#include <linux/iio/common/st_sensors.h>
+
+#define L3G4200D_GYRO_DEV_NAME		"l3g4200d"
+#define LSM330D_GYRO_DEV_NAME		"lsm330d_gyro"
+#define LSM330DL_GYRO_DEV_NAME		"lsm330dl_gyro"
+#define LSM330DLC_GYRO_DEV_NAME		"lsm330dlc_gyro"
+#define L3GD20_GYRO_DEV_NAME		"l3gd20"
+#define L3GD20H_GYRO_DEV_NAME		"l3gd20h"
+#define L3G4IS_GYRO_DEV_NAME		"l3g4is_ui"
+#define LSM330_GYRO_DEV_NAME		"lsm330_gyro"
+#define LSM9DS0_GYRO_DEV_NAME		"lsm9ds0_gyro"
+
+#ifdef CONFIG_IIO_BUFFER
+int st_gyro_allocate_ring(struct iio_dev *indio_dev);
+int st_gyro_trig_set_state(struct iio_trigger *trig, bool state);
+#define ST_GYRO_TRIGGER_SET_STATE (&st_gyro_trig_set_state)
+#else /* CONFIG_IIO_BUFFER */
+static inline int st_gyro_allocate_ring(struct iio_dev *indio_dev)
+{
+	return 0;
+}
+#define ST_GYRO_TRIGGER_SET_STATE NULL
+#endif /* CONFIG_IIO_BUFFER */
+
+#endif /* ST_GYRO_H */
diff --git a/drivers/iio/gyro/st_gyro_buffer.c b/drivers/iio/gyro/st_gyro_buffer.c
new file mode 100644
index 000000000..1ebfe7aa6
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_buffer.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_gyro.h"
+
+int st_gyro_trig_set_state(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+
+	return st_sensors_set_dataready_irq(indio_dev, state);
+}
+
+static int st_gyro_buffer_postenable(struct iio_dev *indio_dev)
+{
+	int err;
+
+	err = st_sensors_set_axis_enable(indio_dev, indio_dev->active_scan_mask[0]);
+	if (err < 0)
+		return err;
+
+	err = st_sensors_set_enable(indio_dev, true);
+	if (err < 0)
+		goto st_gyro_buffer_enable_all_axis;
+
+	return 0;
+
+st_gyro_buffer_enable_all_axis:
+	st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
+	return err;
+}
+
+static int st_gyro_buffer_predisable(struct iio_dev *indio_dev)
+{
+	int err;
+
+	err = st_sensors_set_enable(indio_dev, false);
+	if (err < 0)
+		return err;
+
+	return st_sensors_set_axis_enable(indio_dev, ST_SENSORS_ENABLE_ALL_AXIS);
+}
+
+static const struct iio_buffer_setup_ops st_gyro_buffer_setup_ops = {
+	.postenable = &st_gyro_buffer_postenable,
+	.predisable = &st_gyro_buffer_predisable,
+};
+
+int st_gyro_allocate_ring(struct iio_dev *indio_dev)
+{
+	return devm_iio_triggered_buffer_setup(indio_dev->dev.parent, indio_dev,
+		NULL, &st_sensors_trigger_handler, &st_gyro_buffer_setup_ops);
+}
+
diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c
new file mode 100644
index 000000000..eaa35da42
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_core.c
@@ -0,0 +1,519 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/interrupt.h>
+#include <linux/sysfs.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include "st_gyro.h"
+
+#define ST_GYRO_NUMBER_DATA_CHANNELS		3
+
+/* DEFAULT VALUE FOR SENSORS */
+#define ST_GYRO_DEFAULT_OUT_X_L_ADDR		0x28
+#define ST_GYRO_DEFAULT_OUT_Y_L_ADDR		0x2a
+#define ST_GYRO_DEFAULT_OUT_Z_L_ADDR		0x2c
+
+/* FULLSCALE */
+#define ST_GYRO_FS_AVL_245DPS			245
+#define ST_GYRO_FS_AVL_250DPS			250
+#define ST_GYRO_FS_AVL_500DPS			500
+#define ST_GYRO_FS_AVL_2000DPS			2000
+
+static const struct iio_mount_matrix *
+st_gyro_get_mount_matrix(const struct iio_dev *indio_dev,
+			 const struct iio_chan_spec *chan)
+{
+	struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+	return &gdata->mount_matrix;
+}
+
+static const struct iio_chan_spec_ext_info st_gyro_mount_matrix_ext_info[] = {
+	IIO_MOUNT_MATRIX(IIO_SHARED_BY_ALL, st_gyro_get_mount_matrix),
+	{ }
+};
+
+static const struct iio_chan_spec st_gyro_16bit_channels[] = {
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ANGL_VEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_X, 1, IIO_MOD_X, 's', IIO_LE, 16, 16,
+			ST_GYRO_DEFAULT_OUT_X_L_ADDR,
+			st_gyro_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ANGL_VEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Y, 1, IIO_MOD_Y, 's', IIO_LE, 16, 16,
+			ST_GYRO_DEFAULT_OUT_Y_L_ADDR,
+			st_gyro_mount_matrix_ext_info),
+	ST_SENSORS_LSM_CHANNELS_EXT(IIO_ANGL_VEL,
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+			ST_SENSORS_SCAN_Z, 1, IIO_MOD_Z, 's', IIO_LE, 16, 16,
+			ST_GYRO_DEFAULT_OUT_Z_L_ADDR,
+			st_gyro_mount_matrix_ext_info),
+	IIO_CHAN_SOFT_TIMESTAMP(3)
+};
+
+static const struct st_sensor_settings st_gyro_sensors_settings[] = {
+	{
+		.wai = 0xd3,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = L3G4200D_GYRO_DEV_NAME,
+			[1] = LSM330DL_GYRO_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0xc0,
+			.odr_avl = {
+				{ .hz = 100, .value = 0x00, },
+				{ .hz = 200, .value = 0x01, },
+				{ .hz = 400, .value = 0x02, },
+				{ .hz = 800, .value = 0x03, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0x08,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_GYRO_FS_AVL_250DPS,
+					.value = 0x00,
+					.gain = IIO_DEGREE_TO_RAD(8750),
+				},
+				[1] = {
+					.num = ST_GYRO_FS_AVL_500DPS,
+					.value = 0x01,
+					.gain = IIO_DEGREE_TO_RAD(17500),
+				},
+				[2] = {
+					.num = ST_GYRO_FS_AVL_2000DPS,
+					.value = 0x02,
+					.gain = IIO_DEGREE_TO_RAD(70000),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x23,
+			.mask = 0x80,
+		},
+		.drdy_irq = {
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x08,
+			},
+			/*
+			 * The sensor has IHL (active low) and open
+			 * drain settings, but only for INT1 and not
+			 * for the DRDY line on INT2.
+			 */
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+	{
+		.wai = 0xd4,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = L3GD20_GYRO_DEV_NAME,
+			[1] = LSM330D_GYRO_DEV_NAME,
+			[2] = LSM330DLC_GYRO_DEV_NAME,
+			[3] = L3G4IS_GYRO_DEV_NAME,
+			[4] = LSM330_GYRO_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0xc0,
+			.odr_avl = {
+				{ .hz = 95, .value = 0x00, },
+				{ .hz = 190, .value = 0x01, },
+				{ .hz = 380, .value = 0x02, },
+				{ .hz = 760, .value = 0x03, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0x08,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_GYRO_FS_AVL_250DPS,
+					.value = 0x00,
+					.gain = IIO_DEGREE_TO_RAD(8750),
+				},
+				[1] = {
+					.num = ST_GYRO_FS_AVL_500DPS,
+					.value = 0x01,
+					.gain = IIO_DEGREE_TO_RAD(17500),
+				},
+				[2] = {
+					.num = ST_GYRO_FS_AVL_2000DPS,
+					.value = 0x02,
+					.gain = IIO_DEGREE_TO_RAD(70000),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x23,
+			.mask = 0x80,
+		},
+		.drdy_irq = {
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x08,
+			},
+			/*
+			 * The sensor has IHL (active low) and open
+			 * drain settings, but only for INT1 and not
+			 * for the DRDY line on INT2.
+			 */
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+	{
+		.wai = 0xd4,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = LSM9DS0_GYRO_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = GENMASK(7, 6),
+			.odr_avl = {
+				{ .hz = 95, .value = 0x00, },
+				{ .hz = 190, .value = 0x01, },
+				{ .hz = 380, .value = 0x02, },
+				{ .hz = 760, .value = 0x03, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = BIT(3),
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = GENMASK(5, 4),
+			.fs_avl = {
+				[0] = {
+					.num = ST_GYRO_FS_AVL_245DPS,
+					.value = 0x00,
+					.gain = IIO_DEGREE_TO_RAD(8750),
+				},
+				[1] = {
+					.num = ST_GYRO_FS_AVL_500DPS,
+					.value = 0x01,
+					.gain = IIO_DEGREE_TO_RAD(17500),
+				},
+				[2] = {
+					.num = ST_GYRO_FS_AVL_2000DPS,
+					.value = 0x02,
+					.gain = IIO_DEGREE_TO_RAD(70000),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x23,
+			.mask = BIT(7),
+		},
+		.drdy_irq = {
+			.int2 = {
+				.addr = 0x22,
+				.mask = BIT(3),
+			},
+			/*
+			 * The sensor has IHL (active low) and open
+			 * drain settings, but only for INT1 and not
+			 * for the DRDY line on INT2.
+			 */
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = GENMASK(2, 0),
+			},
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+	{
+		.wai = 0xd7,
+		.wai_addr = ST_SENSORS_DEFAULT_WAI_ADDRESS,
+		.sensors_supported = {
+			[0] = L3GD20H_GYRO_DEV_NAME,
+		},
+		.ch = (struct iio_chan_spec *)st_gyro_16bit_channels,
+		.odr = {
+			.addr = 0x20,
+			.mask = 0xc0,
+			.odr_avl = {
+				{ .hz = 100, .value = 0x00, },
+				{ .hz = 200, .value = 0x01, },
+				{ .hz = 400, .value = 0x02, },
+				{ .hz = 800, .value = 0x03, },
+			},
+		},
+		.pw = {
+			.addr = 0x20,
+			.mask = 0x08,
+			.value_on = ST_SENSORS_DEFAULT_POWER_ON_VALUE,
+			.value_off = ST_SENSORS_DEFAULT_POWER_OFF_VALUE,
+		},
+		.enable_axis = {
+			.addr = ST_SENSORS_DEFAULT_AXIS_ADDR,
+			.mask = ST_SENSORS_DEFAULT_AXIS_MASK,
+		},
+		.fs = {
+			.addr = 0x23,
+			.mask = 0x30,
+			.fs_avl = {
+				[0] = {
+					.num = ST_GYRO_FS_AVL_245DPS,
+					.value = 0x00,
+					.gain = IIO_DEGREE_TO_RAD(8750),
+				},
+				[1] = {
+					.num = ST_GYRO_FS_AVL_500DPS,
+					.value = 0x01,
+					.gain = IIO_DEGREE_TO_RAD(17500),
+				},
+				[2] = {
+					.num = ST_GYRO_FS_AVL_2000DPS,
+					.value = 0x02,
+					.gain = IIO_DEGREE_TO_RAD(70000),
+				},
+			},
+		},
+		.bdu = {
+			.addr = 0x23,
+			.mask = 0x80,
+		},
+		.drdy_irq = {
+			.int2 = {
+				.addr = 0x22,
+				.mask = 0x08,
+			},
+			/*
+			 * The sensor has IHL (active low) and open
+			 * drain settings, but only for INT1 and not
+			 * for the DRDY line on INT2.
+			 */
+			.stat_drdy = {
+				.addr = ST_SENSORS_DEFAULT_STAT_ADDR,
+				.mask = 0x07,
+			},
+		},
+		.sim = {
+			.addr = 0x23,
+			.value = BIT(0),
+		},
+		.multi_read_bit = true,
+		.bootime = 2,
+	},
+};
+
+/* DRDY on gyros is available only on INT2 pin */
+static const struct st_sensors_platform_data gyro_pdata = {
+	.drdy_int_pin = 2,
+};
+
+static int st_gyro_read_raw(struct iio_dev *indio_dev,
+			struct iio_chan_spec const *ch, int *val,
+							int *val2, long mask)
+{
+	int err;
+	struct st_sensor_data *gdata = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		err = st_sensors_read_info_raw(indio_dev, ch, val);
+		if (err < 0)
+			goto read_error;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = gdata->current_fullscale->gain;
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*val = gdata->odr;
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+
+read_error:
+	return err;
+}
+
+static int st_gyro_write_raw(struct iio_dev *indio_dev,
+		struct iio_chan_spec const *chan, int val, int val2, long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SCALE:
+		return st_sensors_set_fullscale_by_gain(indio_dev, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		if (val2)
+			return -EINVAL;
+
+		return st_sensors_set_odr(indio_dev, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static ST_SENSORS_DEV_ATTR_SAMP_FREQ_AVAIL();
+static ST_SENSORS_DEV_ATTR_SCALE_AVAIL(in_anglvel_scale_available);
+
+static struct attribute *st_gyro_attributes[] = {
+	&iio_dev_attr_sampling_frequency_available.dev_attr.attr,
+	&iio_dev_attr_in_anglvel_scale_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group st_gyro_attribute_group = {
+	.attrs = st_gyro_attributes,
+};
+
+static const struct iio_info gyro_info = {
+	.attrs = &st_gyro_attribute_group,
+	.read_raw = &st_gyro_read_raw,
+	.write_raw = &st_gyro_write_raw,
+	.debugfs_reg_access = &st_sensors_debugfs_reg_access,
+};
+
+#ifdef CONFIG_IIO_TRIGGER
+static const struct iio_trigger_ops st_gyro_trigger_ops = {
+	.set_trigger_state = ST_GYRO_TRIGGER_SET_STATE,
+	.validate_device = st_sensors_validate_device,
+};
+#define ST_GYRO_TRIGGER_OPS (&st_gyro_trigger_ops)
+#else
+#define ST_GYRO_TRIGGER_OPS NULL
+#endif
+
+/*
+ * st_gyro_get_settings() - get sensor settings from device name
+ * @name: device name buffer reference.
+ *
+ * Return: valid reference on success, NULL otherwise.
+ */
+const struct st_sensor_settings *st_gyro_get_settings(const char *name)
+{
+	int index = st_sensors_get_settings_index(name,
+					st_gyro_sensors_settings,
+					ARRAY_SIZE(st_gyro_sensors_settings));
+	if (index < 0)
+		return NULL;
+
+	return &st_gyro_sensors_settings[index];
+}
+EXPORT_SYMBOL_NS(st_gyro_get_settings, IIO_ST_SENSORS);
+
+int st_gyro_common_probe(struct iio_dev *indio_dev)
+{
+	struct st_sensor_data *gdata = iio_priv(indio_dev);
+	struct st_sensors_platform_data *pdata;
+	struct device *parent = indio_dev->dev.parent;
+	int err;
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &gyro_info;
+
+	err = st_sensors_verify_id(indio_dev);
+	if (err < 0)
+		return err;
+
+	gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
+	indio_dev->channels = gdata->sensor_settings->ch;
+	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
+
+	err = iio_read_mount_matrix(parent, &gdata->mount_matrix);
+	if (err)
+		return err;
+
+	gdata->current_fullscale = &gdata->sensor_settings->fs.fs_avl[0];
+	gdata->odr = gdata->sensor_settings->odr.odr_avl[0].hz;
+
+	pdata = (struct st_sensors_platform_data *)&gyro_pdata;
+
+	err = st_sensors_init_sensor(indio_dev, pdata);
+	if (err < 0)
+		return err;
+
+	err = st_gyro_allocate_ring(indio_dev);
+	if (err < 0)
+		return err;
+
+	if (gdata->irq > 0) {
+		err = st_sensors_allocate_trigger(indio_dev,
+						  ST_GYRO_TRIGGER_OPS);
+		if (err < 0)
+			return err;
+	}
+
+	return devm_iio_device_register(parent, indio_dev);
+}
+EXPORT_SYMBOL_NS(st_gyro_common_probe, IIO_ST_SENSORS);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics gyroscopes driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ST_SENSORS);
diff --git a/drivers/iio/gyro/st_gyro_i2c.c b/drivers/iio/gyro/st_gyro_i2c.c
new file mode 100644
index 000000000..8c7af42b6
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_i2c.c
@@ -0,0 +1,123 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/i2c.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_i2c.h>
+#include "st_gyro.h"
+
+static const struct of_device_id st_gyro_of_match[] = {
+	{
+		.compatible = "st,l3g4200d-gyro",
+		.data = L3G4200D_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330d-gyro",
+		.data = LSM330D_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dl-gyro",
+		.data = LSM330DL_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dlc-gyro",
+		.data = LSM330DLC_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,l3gd20-gyro",
+		.data = L3GD20_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,l3gd20h-gyro",
+		.data = L3GD20H_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,l3g4is-gyro",
+		.data = L3G4IS_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330-gyro",
+		.data = LSM330_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm9ds0-gyro",
+		.data = LSM9DS0_GYRO_DEV_NAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_gyro_of_match);
+
+static int st_gyro_i2c_probe(struct i2c_client *client,
+			     const struct i2c_device_id *id)
+{
+	const struct st_sensor_settings *settings;
+	struct st_sensor_data *gdata;
+	struct iio_dev *indio_dev;
+	int err;
+
+	st_sensors_dev_name_probe(&client->dev, client->name, sizeof(client->name));
+
+	settings = st_gyro_get_settings(client->name);
+	if (!settings) {
+		dev_err(&client->dev, "device name %s not recognized.\n",
+			client->name);
+		return -ENODEV;
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*gdata));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	gdata = iio_priv(indio_dev);
+	gdata->sensor_settings = (struct st_sensor_settings *)settings;
+
+	err = st_sensors_i2c_configure(indio_dev, client);
+	if (err < 0)
+		return err;
+
+	err = st_sensors_power_enable(indio_dev);
+	if (err)
+		return err;
+
+	return st_gyro_common_probe(indio_dev);
+}
+
+static const struct i2c_device_id st_gyro_id_table[] = {
+	{ L3G4200D_GYRO_DEV_NAME },
+	{ LSM330D_GYRO_DEV_NAME },
+	{ LSM330DL_GYRO_DEV_NAME },
+	{ LSM330DLC_GYRO_DEV_NAME },
+	{ L3GD20_GYRO_DEV_NAME },
+	{ L3GD20H_GYRO_DEV_NAME },
+	{ L3G4IS_GYRO_DEV_NAME },
+	{ LSM330_GYRO_DEV_NAME },
+	{ LSM9DS0_GYRO_DEV_NAME },
+	{},
+};
+MODULE_DEVICE_TABLE(i2c, st_gyro_id_table);
+
+static struct i2c_driver st_gyro_driver = {
+	.driver = {
+		.name = "st-gyro-i2c",
+		.of_match_table = st_gyro_of_match,
+	},
+	.probe = st_gyro_i2c_probe,
+	.id_table = st_gyro_id_table,
+};
+module_i2c_driver(st_gyro_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics gyroscopes i2c driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ST_SENSORS);
diff --git a/drivers/iio/gyro/st_gyro_spi.c b/drivers/iio/gyro/st_gyro_spi.c
new file mode 100644
index 000000000..22aaabe48
--- /dev/null
+++ b/drivers/iio/gyro/st_gyro_spi.c
@@ -0,0 +1,127 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics gyroscopes driver
+ *
+ * Copyright 2012-2013 STMicroelectronics Inc.
+ *
+ * Denis Ciocca <denis.ciocca@st.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+
+#include <linux/iio/common/st_sensors.h>
+#include <linux/iio/common/st_sensors_spi.h>
+#include "st_gyro.h"
+
+/*
+ * For new single-chip sensors use <device_name> as compatible string.
+ * For old single-chip devices keep <device_name>-gyro to maintain
+ * compatibility
+ */
+static const struct of_device_id st_gyro_of_match[] = {
+	{
+		.compatible = "st,l3g4200d-gyro",
+		.data = L3G4200D_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330d-gyro",
+		.data = LSM330D_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dl-gyro",
+		.data = LSM330DL_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330dlc-gyro",
+		.data = LSM330DLC_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,l3gd20-gyro",
+		.data = L3GD20_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,l3gd20h-gyro",
+		.data = L3GD20H_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,l3g4is-gyro",
+		.data = L3G4IS_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm330-gyro",
+		.data = LSM330_GYRO_DEV_NAME,
+	},
+	{
+		.compatible = "st,lsm9ds0-gyro",
+		.data = LSM9DS0_GYRO_DEV_NAME,
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_gyro_of_match);
+
+static int st_gyro_spi_probe(struct spi_device *spi)
+{
+	const struct st_sensor_settings *settings;
+	struct st_sensor_data *gdata;
+	struct iio_dev *indio_dev;
+	int err;
+
+	st_sensors_dev_name_probe(&spi->dev, spi->modalias, sizeof(spi->modalias));
+
+	settings = st_gyro_get_settings(spi->modalias);
+	if (!settings) {
+		dev_err(&spi->dev, "device name %s not recognized.\n",
+			spi->modalias);
+		return -ENODEV;
+	}
+
+	indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*gdata));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	gdata = iio_priv(indio_dev);
+	gdata->sensor_settings = (struct st_sensor_settings *)settings;
+
+	err = st_sensors_spi_configure(indio_dev, spi);
+	if (err < 0)
+		return err;
+
+	err = st_sensors_power_enable(indio_dev);
+	if (err)
+		return err;
+
+	return st_gyro_common_probe(indio_dev);
+}
+
+static const struct spi_device_id st_gyro_id_table[] = {
+	{ L3G4200D_GYRO_DEV_NAME },
+	{ LSM330D_GYRO_DEV_NAME },
+	{ LSM330DL_GYRO_DEV_NAME },
+	{ LSM330DLC_GYRO_DEV_NAME },
+	{ L3GD20_GYRO_DEV_NAME },
+	{ L3GD20H_GYRO_DEV_NAME },
+	{ L3G4IS_GYRO_DEV_NAME },
+	{ LSM330_GYRO_DEV_NAME },
+	{ LSM9DS0_GYRO_DEV_NAME },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, st_gyro_id_table);
+
+static struct spi_driver st_gyro_driver = {
+	.driver = {
+		.name = "st-gyro-spi",
+		.of_match_table = st_gyro_of_match,
+	},
+	.probe = st_gyro_spi_probe,
+	.id_table = st_gyro_id_table,
+};
+module_spi_driver(st_gyro_driver);
+
+MODULE_AUTHOR("Denis Ciocca <denis.ciocca@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics gyroscopes spi driver");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(IIO_ST_SENSORS);