Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 205 insertions, 0 deletions

diff --git a/drivers/iio/humidity/hts221_buffer.c b/drivers/iio/humidity/hts221_buffer.c
new file mode 100644
index 000000000..2a4107a79
--- /dev/null
+++ b/drivers/iio/humidity/hts221_buffer.c
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * STMicroelectronics hts221 sensor driver
+ *
+ * Copyright 2016 STMicroelectronics Inc.
+ *
+ * Lorenzo Bianconi <lorenzo.bianconi@st.com>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/bitfield.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/events.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/buffer.h>
+
+#include <linux/platform_data/st_sensors_pdata.h>
+
+#include "hts221.h"
+
+#define HTS221_REG_DRDY_HL_ADDR		0x22
+#define HTS221_REG_DRDY_HL_MASK		BIT(7)
+#define HTS221_REG_DRDY_PP_OD_ADDR	0x22
+#define HTS221_REG_DRDY_PP_OD_MASK	BIT(6)
+#define HTS221_REG_DRDY_EN_ADDR		0x22
+#define HTS221_REG_DRDY_EN_MASK		BIT(2)
+#define HTS221_REG_STATUS_ADDR		0x27
+#define HTS221_RH_DRDY_MASK		BIT(1)
+#define HTS221_TEMP_DRDY_MASK		BIT(0)
+
+static int hts221_trig_set_state(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *iio_dev = iio_trigger_get_drvdata(trig);
+	struct hts221_hw *hw = iio_priv(iio_dev);
+
+	return regmap_update_bits(hw->regmap, HTS221_REG_DRDY_EN_ADDR,
+				  HTS221_REG_DRDY_EN_MASK,
+				  FIELD_PREP(HTS221_REG_DRDY_EN_MASK, state));
+}
+
+static const struct iio_trigger_ops hts221_trigger_ops = {
+	.set_trigger_state = hts221_trig_set_state,
+};
+
+static irqreturn_t hts221_trigger_handler_thread(int irq, void *private)
+{
+	struct hts221_hw *hw = private;
+	int err, status;
+
+	err = regmap_read(hw->regmap, HTS221_REG_STATUS_ADDR, &status);
+	if (err < 0)
+		return IRQ_HANDLED;
+
+	/*
+	 * H_DA bit (humidity data available) is routed to DRDY line.
+	 * Humidity sample is computed after temperature one.
+	 * Here we can assume data channels are both available if H_DA bit
+	 * is set in status register
+	 */
+	if (!(status & HTS221_RH_DRDY_MASK))
+		return IRQ_NONE;
+
+	iio_trigger_poll_chained(hw->trig);
+
+	return IRQ_HANDLED;
+}
+
+int hts221_allocate_trigger(struct iio_dev *iio_dev)
+{
+	struct hts221_hw *hw = iio_priv(iio_dev);
+	struct st_sensors_platform_data *pdata = dev_get_platdata(hw->dev);
+	bool irq_active_low = false, open_drain = false;
+	unsigned long irq_type;
+	int err;
+
+	irq_type = irqd_get_trigger_type(irq_get_irq_data(hw->irq));
+
+	switch (irq_type) {
+	case IRQF_TRIGGER_HIGH:
+	case IRQF_TRIGGER_RISING:
+		break;
+	case IRQF_TRIGGER_LOW:
+	case IRQF_TRIGGER_FALLING:
+		irq_active_low = true;
+		break;
+	default:
+		dev_info(hw->dev,
+			 "mode %lx unsupported, using IRQF_TRIGGER_RISING\n",
+			 irq_type);
+		irq_type = IRQF_TRIGGER_RISING;
+		break;
+	}
+
+	err = regmap_update_bits(hw->regmap, HTS221_REG_DRDY_HL_ADDR,
+				 HTS221_REG_DRDY_HL_MASK,
+				 FIELD_PREP(HTS221_REG_DRDY_HL_MASK,
+					    irq_active_low));
+	if (err < 0)
+		return err;
+
+	if (device_property_read_bool(hw->dev, "drive-open-drain") ||
+	    (pdata && pdata->open_drain)) {
+		irq_type |= IRQF_SHARED;
+		open_drain = true;
+	}
+
+	err = regmap_update_bits(hw->regmap, HTS221_REG_DRDY_PP_OD_ADDR,
+				 HTS221_REG_DRDY_PP_OD_MASK,
+				 FIELD_PREP(HTS221_REG_DRDY_PP_OD_MASK,
+					    open_drain));
+	if (err < 0)
+		return err;
+
+	err = devm_request_threaded_irq(hw->dev, hw->irq, NULL,
+					hts221_trigger_handler_thread,
+					irq_type | IRQF_ONESHOT,
+					hw->name, hw);
+	if (err) {
+		dev_err(hw->dev, "failed to request trigger irq %d\n",
+			hw->irq);
+		return err;
+	}
+
+	hw->trig = devm_iio_trigger_alloc(hw->dev, "%s-trigger",
+					  iio_dev->name);
+	if (!hw->trig)
+		return -ENOMEM;
+
+	iio_trigger_set_drvdata(hw->trig, iio_dev);
+	hw->trig->ops = &hts221_trigger_ops;
+
+	err = devm_iio_trigger_register(hw->dev, hw->trig);
+
+	iio_dev->trig = iio_trigger_get(hw->trig);
+
+	return err;
+}
+
+static int hts221_buffer_preenable(struct iio_dev *iio_dev)
+{
+	return hts221_set_enable(iio_priv(iio_dev), true);
+}
+
+static int hts221_buffer_postdisable(struct iio_dev *iio_dev)
+{
+	return hts221_set_enable(iio_priv(iio_dev), false);
+}
+
+static const struct iio_buffer_setup_ops hts221_buffer_ops = {
+	.preenable = hts221_buffer_preenable,
+	.postdisable = hts221_buffer_postdisable,
+};
+
+static irqreturn_t hts221_buffer_handler_thread(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *iio_dev = pf->indio_dev;
+	struct hts221_hw *hw = iio_priv(iio_dev);
+	struct iio_chan_spec const *ch;
+	int err;
+
+	/* humidity data */
+	ch = &iio_dev->channels[HTS221_SENSOR_H];
+	err = regmap_bulk_read(hw->regmap, ch->address,
+			       &hw->scan.channels[0],
+			       sizeof(hw->scan.channels[0]));
+	if (err < 0)
+		goto out;
+
+	/* temperature data */
+	ch = &iio_dev->channels[HTS221_SENSOR_T];
+	err = regmap_bulk_read(hw->regmap, ch->address,
+			       &hw->scan.channels[1],
+			       sizeof(hw->scan.channels[1]));
+	if (err < 0)
+		goto out;
+
+	iio_push_to_buffers_with_timestamp(iio_dev, &hw->scan,
+					   iio_get_time_ns(iio_dev));
+
+out:
+	iio_trigger_notify_done(hw->trig);
+
+	return IRQ_HANDLED;
+}
+
+int hts221_allocate_buffers(struct iio_dev *iio_dev)
+{
+	struct hts221_hw *hw = iio_priv(iio_dev);
+	return devm_iio_triggered_buffer_setup(hw->dev, iio_dev,
+					NULL, hts221_buffer_handler_thread,
+					&hts221_buffer_ops);
+}
+
+MODULE_AUTHOR("Lorenzo Bianconi <lorenzo.bianconi@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics hts221 buffer driver");
+MODULE_LICENSE("GPL v2");