Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

19 files changed, 10166 insertions, 0 deletions

diff --git a/drivers/iio/proximity/Kconfig b/drivers/iio/proximity/Kconfig
new file mode 100644
index 000000000..0e5c17530
--- /dev/null
+++ b/drivers/iio/proximity/Kconfig
@@ -0,0 +1,210 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# Proximity sensors
+#
+
+menu "Lightning sensors"
+
+config AS3935
+	tristate "AS3935 Franklin lightning sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	depends on SPI
+	help
+	  Say Y here to build SPI interface support for the Austrian
+	  Microsystems AS3935 lightning detection sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called as3935
+
+endmenu
+
+menu "Proximity and distance sensors"
+
+config CROS_EC_MKBP_PROXIMITY
+	tristate "ChromeOS EC MKBP Proximity sensor"
+	depends on CROS_EC
+	help
+	  Say Y here to enable the proximity sensor implemented via the ChromeOS EC MKBP
+	  switches protocol. You must enable one bus option (CROS_EC_I2C or CROS_EC_SPI)
+	  to use this.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_ec_mkbp_proximity.
+
+config ISL29501
+	tristate "Intersil ISL29501 Time Of Flight sensor"
+	depends on I2C
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select IIO_KFIFO_BUF
+	help
+	  Say Y here if you want to build a driver for the Intersil ISL29501
+	  Time of Flight sensor.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called isl29501.
+
+config LIDAR_LITE_V2
+	tristate "PulsedLight LIDAR sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	depends on I2C
+	help
+	  Say Y to build a driver for PulsedLight LIDAR range finding
+	  sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pulsedlight-lite-v2
+
+config MB1232
+	tristate "MaxSonar I2CXL family ultrasonic sensors"
+	depends on I2C
+	help
+	  Say Y to build a driver for the ultrasonic sensors I2CXL of
+	  MaxBotix which have an i2c interface. It can be used to measure
+	  the distance of objects. Supported types are mb1202, mb1212,
+	  mb1222, mb1232, mb1242, mb7040, mb7137
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mb1232.
+
+config PING
+	tristate "Parallax GPIO bitbanged ranger sensors"
+	depends on GPIOLIB
+	help
+	  Say Y here to build a driver for GPIO bitbanged ranger sensors
+	  with just one GPIO for the trigger and echo. This driver can be
+	  used to measure the distance of objects.
+
+	  Actually supported are:
+	  - Parallax PING))) (ultrasonic)
+	  - Parallax LaserPING (time-of-flight)
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ping.
+
+config RFD77402
+	tristate "RFD77402 ToF sensor"
+	depends on I2C
+	help
+	  Say Y to build a driver for the RFD77402 Time-of-Flight (distance)
+	  sensor module with I2C interface.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rfd77402.
+
+config SRF04
+	tristate "GPIO bitbanged ultrasonic ranger sensor (SRF04, MB1000)"
+	depends on GPIOLIB
+	help
+	  Say Y here to build a driver for GPIO bitbanged ultrasonic
+	  ranger sensor. This driver can be used to measure the distance
+	  of objects. It is using two GPIOs.
+	  Actually Supported types are:
+	  - Devantech SRF04
+	  - Maxbotix mb1000
+	  - Maxbotix mb1010
+	  - Maxbotix mb1020
+	  - Maxbotix mb1030
+	  - Maxbotix mb1040
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called srf04.
+
+config SX_COMMON
+	tristate
+	help
+	  Common Semtech proximity sensor code.
+
+config SX9310
+	tristate "SX9310/SX9311 Semtech proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	select SX_COMMON
+	depends on I2C
+	help
+	  Say Y here to build a driver for Semtech's SX9310/SX9311 capacitive
+	  proximity/button sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx9310.
+
+config SX9324
+	tristate "SX9324 Semtech proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	select SX_COMMON
+	depends on I2C
+	help
+	  Say Y here to build a driver for Semtech's SX9324
+	  proximity/button sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx9324.
+
+config SX9360
+	tristate "SX9360 Semtech proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	select SX_COMMON
+	depends on I2C
+	help
+	  Say Y here to build a driver for Semtech's SX9360
+	  proximity/button sensor, a simplified SX9324.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx9360.
+
+config SX9500
+	tristate "SX9500 Semtech proximity sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say Y here to build a driver for Semtech's SX9500 capacitive
+	  proximity/button sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx9500.
+
+config SRF08
+	tristate "Devantech SRF02/SRF08/SRF10 ultrasonic ranger sensor"
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
+	depends on I2C
+	help
+	  Say Y here to build a driver for Devantech SRF02/SRF08/SRF10
+	  ultrasonic ranger sensors with i2c interface.
+	  This driver can be used to measure the distance of objects.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called srf08.
+
+config VCNL3020
+	tristate "VCNL3020 proximity sensor"
+	select REGMAP_I2C
+	depends on I2C
+	help
+	  Say Y here if you want to build a driver for the Vishay VCNL3020
+	  proximity sensor.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vcnl3020.
+
+config VL53L0X_I2C
+	tristate "STMicroelectronics VL53L0X ToF ranger sensor (I2C)"
+	depends on I2C
+	help
+	  Say Y here to build a driver for STMicroelectronics VL53L0X
+	  ToF ranger sensors with i2c interface.
+	  This driver can be used to measure the distance of objects.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vl53l0x-i2c.
+
+endmenu
diff --git a/drivers/iio/proximity/Makefile b/drivers/iio/proximity/Makefile
new file mode 100644
index 000000000..cc838bb54
--- /dev/null
+++ b/drivers/iio/proximity/Makefile
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for IIO proximity sensors
+#
+
+# When adding new entries keep the list in alphabetical order
+obj-$(CONFIG_AS3935)		+= as3935.o
+obj-$(CONFIG_CROS_EC_MKBP_PROXIMITY) += cros_ec_mkbp_proximity.o
+obj-$(CONFIG_ISL29501)		+= isl29501.o
+obj-$(CONFIG_LIDAR_LITE_V2)	+= pulsedlight-lidar-lite-v2.o
+obj-$(CONFIG_MB1232)		+= mb1232.o
+obj-$(CONFIG_PING)		+= ping.o
+obj-$(CONFIG_RFD77402)		+= rfd77402.o
+obj-$(CONFIG_SRF04)		+= srf04.o
+obj-$(CONFIG_SRF08)		+= srf08.o
+obj-$(CONFIG_SX9310)		+= sx9310.o
+obj-$(CONFIG_SX9324)		+= sx9324.o
+obj-$(CONFIG_SX9360)		+= sx9360.o
+obj-$(CONFIG_SX_COMMON) 	+= sx_common.o
+obj-$(CONFIG_SX9500)		+= sx9500.o
+obj-$(CONFIG_VCNL3020)		+= vcnl3020.o
+obj-$(CONFIG_VL53L0X_I2C)	+= vl53l0x-i2c.o
+
diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c
new file mode 100644
index 000000000..ebc95cf8f
--- /dev/null
+++ b/drivers/iio/proximity/as3935.c
@@ -0,0 +1,470 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * as3935.c - Support for AS3935 Franklin lightning sensor
+ *
+ * Copyright (C) 2014, 2017-2018
+ * Author: Matt Ranostay <matt.ranostay@konsulko.com>
+ */
+
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/devm-helpers.h>
+#include <linux/mutex.h>
+#include <linux/err.h>
+#include <linux/irq.h>
+#include <linux/spi/spi.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#define AS3935_AFE_GAIN		0x00
+#define AS3935_AFE_MASK		0x3F
+#define AS3935_AFE_GAIN_MAX	0x1F
+#define AS3935_AFE_PWR_BIT	BIT(0)
+
+#define AS3935_NFLWDTH		0x01
+#define AS3935_NFLWDTH_MASK	0x7f
+
+#define AS3935_INT		0x03
+#define AS3935_INT_MASK		0x0f
+#define AS3935_DISTURB_INT	BIT(2)
+#define AS3935_EVENT_INT	BIT(3)
+#define AS3935_NOISE_INT	BIT(0)
+
+#define AS3935_DATA		0x07
+#define AS3935_DATA_MASK	0x3F
+
+#define AS3935_TUNE_CAP		0x08
+#define AS3935_DEFAULTS		0x3C
+#define AS3935_CALIBRATE	0x3D
+
+#define AS3935_READ_DATA	BIT(14)
+#define AS3935_ADDRESS(x)	((x) << 8)
+
+#define MAX_PF_CAP		120
+#define TUNE_CAP_DIV		8
+
+struct as3935_state {
+	struct spi_device *spi;
+	struct iio_trigger *trig;
+	struct mutex lock;
+	struct delayed_work work;
+
+	unsigned long noise_tripped;
+	u32 tune_cap;
+	u32 nflwdth_reg;
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		u8 chan;
+		s64 timestamp __aligned(8);
+	} scan;
+	u8 buf[2] __aligned(IIO_DMA_MINALIGN);
+};
+
+static const struct iio_chan_spec as3935_channels[] = {
+	{
+		.type           = IIO_PROXIMITY,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) |
+			BIT(IIO_CHAN_INFO_PROCESSED) |
+			BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index     = 0,
+		.scan_type = {
+			.sign           = 'u',
+			.realbits       = 6,
+			.storagebits    = 8,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static int as3935_read(struct as3935_state *st, unsigned int reg, int *val)
+{
+	u8 cmd;
+	int ret;
+
+	cmd = (AS3935_READ_DATA | AS3935_ADDRESS(reg)) >> 8;
+	ret = spi_w8r8(st->spi, cmd);
+	if (ret < 0)
+		return ret;
+	*val = ret;
+
+	return 0;
+}
+
+static int as3935_write(struct as3935_state *st,
+				unsigned int reg,
+				unsigned int val)
+{
+	u8 *buf = st->buf;
+
+	buf[0] = AS3935_ADDRESS(reg) >> 8;
+	buf[1] = val;
+
+	return spi_write(st->spi, buf, 2);
+}
+
+static ssize_t as3935_sensor_sensitivity_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct as3935_state *st = iio_priv(dev_to_iio_dev(dev));
+	int val, ret;
+
+	ret = as3935_read(st, AS3935_AFE_GAIN, &val);
+	if (ret)
+		return ret;
+	val = (val & AS3935_AFE_MASK) >> 1;
+
+	return sysfs_emit(buf, "%d\n", val);
+}
+
+static ssize_t as3935_sensor_sensitivity_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t len)
+{
+	struct as3935_state *st = iio_priv(dev_to_iio_dev(dev));
+	unsigned long val;
+	int ret;
+
+	ret = kstrtoul(buf, 10, &val);
+	if (ret)
+		return -EINVAL;
+
+	if (val > AS3935_AFE_GAIN_MAX)
+		return -EINVAL;
+
+	as3935_write(st, AS3935_AFE_GAIN, val << 1);
+
+	return len;
+}
+
+static ssize_t as3935_noise_level_tripped_show(struct device *dev,
+					struct device_attribute *attr,
+					char *buf)
+{
+	struct as3935_state *st = iio_priv(dev_to_iio_dev(dev));
+	int ret;
+
+	mutex_lock(&st->lock);
+	ret = sysfs_emit(buf, "%d\n", !time_after(jiffies, st->noise_tripped + HZ));
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR,
+	as3935_sensor_sensitivity_show, as3935_sensor_sensitivity_store, 0);
+
+static IIO_DEVICE_ATTR(noise_level_tripped, S_IRUGO,
+	as3935_noise_level_tripped_show, NULL, 0);
+
+static struct attribute *as3935_attributes[] = {
+	&iio_dev_attr_sensor_sensitivity.dev_attr.attr,
+	&iio_dev_attr_noise_level_tripped.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group as3935_attribute_group = {
+	.attrs = as3935_attributes,
+};
+
+static int as3935_read_raw(struct iio_dev *indio_dev,
+			   struct iio_chan_spec const *chan,
+			   int *val,
+			   int *val2,
+			   long m)
+{
+	struct as3935_state *st = iio_priv(indio_dev);
+	int ret;
+
+
+	switch (m) {
+	case IIO_CHAN_INFO_PROCESSED:
+	case IIO_CHAN_INFO_RAW:
+		*val2 = 0;
+		ret = as3935_read(st, AS3935_DATA, val);
+		if (ret)
+			return ret;
+
+		/* storm out of range */
+		if (*val == AS3935_DATA_MASK)
+			return -EINVAL;
+
+		if (m == IIO_CHAN_INFO_RAW)
+			return IIO_VAL_INT;
+
+		if (m == IIO_CHAN_INFO_PROCESSED)
+			*val *= 1000;
+		break;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 1000;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return IIO_VAL_INT;
+}
+
+static const struct iio_info as3935_info = {
+	.attrs = &as3935_attribute_group,
+	.read_raw = &as3935_read_raw,
+};
+
+static irqreturn_t as3935_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct as3935_state *st = iio_priv(indio_dev);
+	int val, ret;
+
+	ret = as3935_read(st, AS3935_DATA, &val);
+	if (ret)
+		goto err_read;
+
+	st->scan.chan = val & AS3935_DATA_MASK;
+	iio_push_to_buffers_with_timestamp(indio_dev, &st->scan,
+					   iio_get_time_ns(indio_dev));
+err_read:
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static void as3935_event_work(struct work_struct *work)
+{
+	struct as3935_state *st;
+	int val;
+	int ret;
+
+	st = container_of(work, struct as3935_state, work.work);
+
+	ret = as3935_read(st, AS3935_INT, &val);
+	if (ret) {
+		dev_warn(&st->spi->dev, "read error\n");
+		return;
+	}
+
+	val &= AS3935_INT_MASK;
+
+	switch (val) {
+	case AS3935_EVENT_INT:
+		iio_trigger_poll_chained(st->trig);
+		break;
+	case AS3935_DISTURB_INT:
+	case AS3935_NOISE_INT:
+		mutex_lock(&st->lock);
+		st->noise_tripped = jiffies;
+		mutex_unlock(&st->lock);
+		dev_warn(&st->spi->dev, "noise level is too high\n");
+		break;
+	}
+}
+
+static irqreturn_t as3935_interrupt_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct as3935_state *st = iio_priv(indio_dev);
+
+	/*
+	 * Delay work for >2 milliseconds after an interrupt to allow
+	 * estimated distance to recalculated.
+	 */
+
+	schedule_delayed_work(&st->work, msecs_to_jiffies(3));
+
+	return IRQ_HANDLED;
+}
+
+static void calibrate_as3935(struct as3935_state *st)
+{
+	as3935_write(st, AS3935_DEFAULTS, 0x96);
+	as3935_write(st, AS3935_CALIBRATE, 0x96);
+	as3935_write(st, AS3935_TUNE_CAP,
+		BIT(5) | (st->tune_cap / TUNE_CAP_DIV));
+
+	mdelay(2);
+	as3935_write(st, AS3935_TUNE_CAP, (st->tune_cap / TUNE_CAP_DIV));
+	as3935_write(st, AS3935_NFLWDTH, st->nflwdth_reg);
+}
+
+static int as3935_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct as3935_state *st = iio_priv(indio_dev);
+	int val, ret;
+
+	mutex_lock(&st->lock);
+	ret = as3935_read(st, AS3935_AFE_GAIN, &val);
+	if (ret)
+		goto err_suspend;
+	val |= AS3935_AFE_PWR_BIT;
+
+	ret = as3935_write(st, AS3935_AFE_GAIN, val);
+
+err_suspend:
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static int as3935_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct as3935_state *st = iio_priv(indio_dev);
+	int val, ret;
+
+	mutex_lock(&st->lock);
+	ret = as3935_read(st, AS3935_AFE_GAIN, &val);
+	if (ret)
+		goto err_resume;
+	val &= ~AS3935_AFE_PWR_BIT;
+	ret = as3935_write(st, AS3935_AFE_GAIN, val);
+
+	calibrate_as3935(st);
+
+err_resume:
+	mutex_unlock(&st->lock);
+
+	return ret;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(as3935_pm_ops, as3935_suspend, as3935_resume);
+
+static int as3935_probe(struct spi_device *spi)
+{
+	struct device *dev = &spi->dev;
+	struct iio_dev *indio_dev;
+	struct iio_trigger *trig;
+	struct as3935_state *st;
+	int ret;
+
+	/* Be sure lightning event interrupt is specified */
+	if (!spi->irq) {
+		dev_err(dev, "unable to get event interrupt\n");
+		return -EINVAL;
+	}
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	st = iio_priv(indio_dev);
+	st->spi = spi;
+
+	spi_set_drvdata(spi, indio_dev);
+	mutex_init(&st->lock);
+
+	ret = device_property_read_u32(dev,
+			"ams,tuning-capacitor-pf", &st->tune_cap);
+	if (ret) {
+		st->tune_cap = 0;
+		dev_warn(dev, "no tuning-capacitor-pf set, defaulting to %d",
+			st->tune_cap);
+	}
+
+	if (st->tune_cap > MAX_PF_CAP) {
+		dev_err(dev, "wrong tuning-capacitor-pf setting of %d\n",
+			st->tune_cap);
+		return -EINVAL;
+	}
+
+	ret = device_property_read_u32(dev,
+			"ams,nflwdth", &st->nflwdth_reg);
+	if (!ret && st->nflwdth_reg > AS3935_NFLWDTH_MASK) {
+		dev_err(dev, "invalid nflwdth setting of %d\n",
+			st->nflwdth_reg);
+		return -EINVAL;
+	}
+
+	indio_dev->name = spi_get_device_id(spi)->name;
+	indio_dev->channels = as3935_channels;
+	indio_dev->num_channels = ARRAY_SIZE(as3935_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->info = &as3935_info;
+
+	trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+				      indio_dev->name,
+				      iio_device_id(indio_dev));
+
+	if (!trig)
+		return -ENOMEM;
+
+	st->trig = trig;
+	st->noise_tripped = jiffies - HZ;
+	iio_trigger_set_drvdata(trig, indio_dev);
+
+	ret = devm_iio_trigger_register(dev, trig);
+	if (ret) {
+		dev_err(dev, "failed to register trigger\n");
+		return ret;
+	}
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					      iio_pollfunc_store_time,
+					      as3935_trigger_handler, NULL);
+
+	if (ret) {
+		dev_err(dev, "cannot setup iio trigger\n");
+		return ret;
+	}
+
+	calibrate_as3935(st);
+
+	ret = devm_delayed_work_autocancel(dev, &st->work, as3935_event_work);
+	if (ret)
+		return ret;
+
+	ret = devm_request_irq(dev, spi->irq,
+				&as3935_interrupt_handler,
+				IRQF_TRIGGER_RISING,
+				dev_name(dev),
+				indio_dev);
+
+	if (ret) {
+		dev_err(dev, "unable to request irq\n");
+		return ret;
+	}
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret < 0) {
+		dev_err(dev, "unable to register device\n");
+		return ret;
+	}
+	return 0;
+}
+
+static const struct of_device_id as3935_of_match[] = {
+	{ .compatible = "ams,as3935", },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, as3935_of_match);
+
+static const struct spi_device_id as3935_id[] = {
+	{"as3935", 0},
+	{},
+};
+MODULE_DEVICE_TABLE(spi, as3935_id);
+
+static struct spi_driver as3935_driver = {
+	.driver = {
+		.name	= "as3935",
+		.of_match_table = as3935_of_match,
+		.pm	= pm_sleep_ptr(&as3935_pm_ops),
+	},
+	.probe		= as3935_probe,
+	.id_table	= as3935_id,
+};
+module_spi_driver(as3935_driver);
+
+MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
+MODULE_DESCRIPTION("AS3935 lightning sensor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/proximity/cros_ec_mkbp_proximity.c b/drivers/iio/proximity/cros_ec_mkbp_proximity.c
new file mode 100644
index 000000000..571ea1812
--- /dev/null
+++ b/drivers/iio/proximity/cros_ec_mkbp_proximity.c
@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Driver for cros-ec proximity sensor exposed through MKBP switch
+ *
+ * Copyright 2021 Google LLC.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include <asm/unaligned.h>
+
+struct cros_ec_mkbp_proximity_data {
+	struct cros_ec_device *ec;
+	struct iio_dev *indio_dev;
+	struct mutex lock;
+	struct notifier_block notifier;
+	int last_proximity;
+	bool enabled;
+};
+
+static const struct iio_event_spec cros_ec_mkbp_proximity_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec cros_ec_mkbp_proximity_chan_spec[] = {
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.event_spec = cros_ec_mkbp_proximity_events,
+		.num_event_specs = ARRAY_SIZE(cros_ec_mkbp_proximity_events),
+	},
+};
+
+static int cros_ec_mkbp_proximity_parse_state(const void *data)
+{
+	u32 switches = get_unaligned_le32(data);
+
+	return !!(switches & BIT(EC_MKBP_FRONT_PROXIMITY));
+}
+
+static int cros_ec_mkbp_proximity_query(struct cros_ec_device *ec_dev,
+					int *state)
+{
+	struct {
+		struct cros_ec_command msg;
+		union {
+			struct ec_params_mkbp_info params;
+			u32 switches;
+		};
+	} __packed buf = { };
+	struct ec_params_mkbp_info *params = &buf.params;
+	struct cros_ec_command *msg = &buf.msg;
+	u32 *switches = &buf.switches;
+	size_t insize = sizeof(*switches);
+	int ret;
+
+	msg->command = EC_CMD_MKBP_INFO;
+	msg->version = 1;
+	msg->outsize = sizeof(*params);
+	msg->insize = insize;
+
+	params->info_type = EC_MKBP_INFO_CURRENT;
+	params->event_type = EC_MKBP_EVENT_SWITCH;
+
+	ret = cros_ec_cmd_xfer_status(ec_dev, msg);
+	if (ret < 0)
+		return ret;
+
+	if (ret != insize) {
+		dev_warn(ec_dev->dev, "wrong result size: %d != %zu\n", ret,
+			 insize);
+		return -EPROTO;
+	}
+
+	*state = cros_ec_mkbp_proximity_parse_state(switches);
+	return IIO_VAL_INT;
+}
+
+static void cros_ec_mkbp_proximity_push_event(struct cros_ec_mkbp_proximity_data *data, int state)
+{
+	s64 timestamp;
+	u64 ev;
+	int dir;
+	struct iio_dev *indio_dev = data->indio_dev;
+	struct cros_ec_device *ec = data->ec;
+
+	mutex_lock(&data->lock);
+	if (state != data->last_proximity) {
+		if (data->enabled) {
+			timestamp = ktime_to_ns(ec->last_event_time);
+			if (iio_device_get_clock(indio_dev) != CLOCK_BOOTTIME)
+				timestamp = iio_get_time_ns(indio_dev);
+
+			dir = state ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
+			ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
+						  IIO_EV_TYPE_THRESH, dir);
+			iio_push_event(indio_dev, ev, timestamp);
+		}
+		data->last_proximity = state;
+	}
+	mutex_unlock(&data->lock);
+}
+
+static int cros_ec_mkbp_proximity_notify(struct notifier_block *nb,
+					 unsigned long queued_during_suspend,
+					 void *_ec)
+{
+	struct cros_ec_mkbp_proximity_data *data;
+	struct cros_ec_device *ec = _ec;
+	u8 event_type = ec->event_data.event_type & EC_MKBP_EVENT_TYPE_MASK;
+	void *switches;
+	int state;
+
+	if (event_type == EC_MKBP_EVENT_SWITCH) {
+		data = container_of(nb, struct cros_ec_mkbp_proximity_data,
+				    notifier);
+
+		switches = &ec->event_data.data.switches;
+		state = cros_ec_mkbp_proximity_parse_state(switches);
+		cros_ec_mkbp_proximity_push_event(data, state);
+	}
+
+	return NOTIFY_OK;
+}
+
+static int cros_ec_mkbp_proximity_read_raw(struct iio_dev *indio_dev,
+			   const struct iio_chan_spec *chan, int *val,
+			   int *val2, long mask)
+{
+	struct cros_ec_mkbp_proximity_data *data = iio_priv(indio_dev);
+	struct cros_ec_device *ec = data->ec;
+
+	if (chan->type == IIO_PROXIMITY && mask == IIO_CHAN_INFO_RAW)
+		return cros_ec_mkbp_proximity_query(ec, val);
+
+	return -EINVAL;
+}
+
+static int cros_ec_mkbp_proximity_read_event_config(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir)
+{
+	struct cros_ec_mkbp_proximity_data *data = iio_priv(indio_dev);
+
+	return data->enabled;
+}
+
+static int cros_ec_mkbp_proximity_write_event_config(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir, int state)
+{
+	struct cros_ec_mkbp_proximity_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->lock);
+	data->enabled = state;
+	mutex_unlock(&data->lock);
+
+	return 0;
+}
+
+static const struct iio_info cros_ec_mkbp_proximity_info = {
+	.read_raw = cros_ec_mkbp_proximity_read_raw,
+	.read_event_config = cros_ec_mkbp_proximity_read_event_config,
+	.write_event_config = cros_ec_mkbp_proximity_write_event_config,
+};
+
+static int cros_ec_mkbp_proximity_resume(struct device *dev)
+{
+	struct cros_ec_mkbp_proximity_data *data = dev_get_drvdata(dev);
+	struct cros_ec_device *ec = data->ec;
+	int ret, state;
+
+	ret = cros_ec_mkbp_proximity_query(ec, &state);
+	if (ret < 0) {
+		dev_warn(dev, "failed to fetch proximity state on resume: %d\n",
+			 ret);
+	} else {
+		cros_ec_mkbp_proximity_push_event(data, state);
+	}
+
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(cros_ec_mkbp_proximity_pm_ops, NULL,
+				cros_ec_mkbp_proximity_resume);
+
+static int cros_ec_mkbp_proximity_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct cros_ec_device *ec = dev_get_drvdata(dev->parent);
+	struct iio_dev *indio_dev;
+	struct cros_ec_mkbp_proximity_data *data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->ec = ec;
+	data->indio_dev = indio_dev;
+	data->last_proximity = -1; /* Unknown to start */
+	mutex_init(&data->lock);
+	platform_set_drvdata(pdev, data);
+
+	indio_dev->name = dev->driver->name;
+	indio_dev->info = &cros_ec_mkbp_proximity_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = cros_ec_mkbp_proximity_chan_spec;
+	indio_dev->num_channels = ARRAY_SIZE(cros_ec_mkbp_proximity_chan_spec);
+
+	ret = devm_iio_device_register(dev, indio_dev);
+	if (ret)
+		return ret;
+
+	data->notifier.notifier_call = cros_ec_mkbp_proximity_notify;
+	blocking_notifier_chain_register(&ec->event_notifier, &data->notifier);
+
+	return 0;
+}
+
+static int cros_ec_mkbp_proximity_remove(struct platform_device *pdev)
+{
+	struct cros_ec_mkbp_proximity_data *data = platform_get_drvdata(pdev);
+	struct cros_ec_device *ec = data->ec;
+
+	blocking_notifier_chain_unregister(&ec->event_notifier,
+					   &data->notifier);
+
+	return 0;
+}
+
+static const struct of_device_id cros_ec_mkbp_proximity_of_match[] = {
+	{ .compatible = "google,cros-ec-mkbp-proximity" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, cros_ec_mkbp_proximity_of_match);
+
+static struct platform_driver cros_ec_mkbp_proximity_driver = {
+	.driver = {
+		.name = "cros-ec-mkbp-proximity",
+		.of_match_table = cros_ec_mkbp_proximity_of_match,
+		.pm = pm_sleep_ptr(&cros_ec_mkbp_proximity_pm_ops),
+	},
+	.probe = cros_ec_mkbp_proximity_probe,
+	.remove = cros_ec_mkbp_proximity_remove,
+};
+module_platform_driver(cros_ec_mkbp_proximity_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ChromeOS EC MKBP proximity sensor driver");
diff --git a/drivers/iio/proximity/isl29501.c b/drivers/iio/proximity/isl29501.c
new file mode 100644
index 000000000..5b6ea7837
--- /dev/null
+++ b/drivers/iio/proximity/isl29501.c
@@ -0,0 +1,1018 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * isl29501.c: ISL29501 Time of Flight sensor driver.
+ *
+ * Copyright (C) 2018
+ * Author: Mathieu Othacehe <m.othacehe@gmail.com>
+ *
+ * 7-bit I2C slave address: 0x57
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/of_device.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/triggered_buffer.h>
+
+/* Control, setting and status registers */
+#define ISL29501_DEVICE_ID			0x00
+#define ISL29501_ID				0x0A
+
+/* Sampling control registers */
+#define ISL29501_INTEGRATION_PERIOD		0x10
+#define ISL29501_SAMPLE_PERIOD			0x11
+
+/* Closed loop calibration registers */
+#define ISL29501_CROSSTALK_I_MSB		0x24
+#define ISL29501_CROSSTALK_I_LSB		0x25
+#define ISL29501_CROSSTALK_I_EXPONENT		0x26
+#define ISL29501_CROSSTALK_Q_MSB		0x27
+#define ISL29501_CROSSTALK_Q_LSB		0x28
+#define ISL29501_CROSSTALK_Q_EXPONENT		0x29
+#define ISL29501_CROSSTALK_GAIN_MSB		0x2A
+#define ISL29501_CROSSTALK_GAIN_LSB		0x2B
+#define ISL29501_MAGNITUDE_REF_EXP		0x2C
+#define ISL29501_MAGNITUDE_REF_MSB		0x2D
+#define ISL29501_MAGNITUDE_REF_LSB		0x2E
+#define ISL29501_PHASE_OFFSET_MSB		0x2F
+#define ISL29501_PHASE_OFFSET_LSB		0x30
+
+/* Analog control registers */
+#define ISL29501_DRIVER_RANGE			0x90
+#define ISL29501_EMITTER_DAC			0x91
+
+#define ISL29501_COMMAND_REGISTER		0xB0
+
+/* Commands */
+#define ISL29501_EMUL_SAMPLE_START_PIN		0x49
+#define ISL29501_RESET_ALL_REGISTERS		0xD7
+#define ISL29501_RESET_INT_SM			0xD1
+
+/* Ambiant light and temperature corrections */
+#define ISL29501_TEMP_REFERENCE			0x31
+#define ISL29501_PHASE_EXPONENT			0x33
+#define ISL29501_TEMP_COEFF_A			0x34
+#define ISL29501_TEMP_COEFF_B			0x39
+#define ISL29501_AMBIANT_COEFF_A		0x36
+#define ISL29501_AMBIANT_COEFF_B		0x3B
+
+/* Data output registers */
+#define ISL29501_DISTANCE_MSB_DATA		0xD1
+#define ISL29501_DISTANCE_LSB_DATA		0xD2
+#define ISL29501_PRECISION_MSB			0xD3
+#define ISL29501_PRECISION_LSB			0xD4
+#define ISL29501_MAGNITUDE_EXPONENT		0xD5
+#define ISL29501_MAGNITUDE_MSB			0xD6
+#define ISL29501_MAGNITUDE_LSB			0xD7
+#define ISL29501_PHASE_MSB			0xD8
+#define ISL29501_PHASE_LSB			0xD9
+#define ISL29501_I_RAW_EXPONENT			0xDA
+#define ISL29501_I_RAW_MSB			0xDB
+#define ISL29501_I_RAW_LSB			0xDC
+#define ISL29501_Q_RAW_EXPONENT			0xDD
+#define ISL29501_Q_RAW_MSB			0xDE
+#define ISL29501_Q_RAW_LSB			0xDF
+#define ISL29501_DIE_TEMPERATURE		0xE2
+#define ISL29501_AMBIENT_LIGHT			0xE3
+#define ISL29501_GAIN_MSB			0xE6
+#define ISL29501_GAIN_LSB			0xE7
+
+#define ISL29501_MAX_EXP_VAL 15
+
+#define ISL29501_INT_TIME_AVAILABLE \
+	"0.00007 0.00014 0.00028 0.00057 0.00114 " \
+	"0.00228 0.00455 0.00910 0.01820 0.03640 " \
+	"0.07281 0.14561"
+
+#define ISL29501_CURRENT_SCALE_AVAILABLE \
+	"0.0039 0.0078 0.0118 0.0157 0.0196 " \
+	"0.0235 0.0275 0.0314 0.0352 0.0392 " \
+	"0.0431 0.0471 0.0510 0.0549 0.0588"
+
+enum isl29501_correction_coeff {
+	COEFF_TEMP_A,
+	COEFF_TEMP_B,
+	COEFF_LIGHT_A,
+	COEFF_LIGHT_B,
+	COEFF_MAX,
+};
+
+struct isl29501_private {
+	struct i2c_client *client;
+	struct mutex lock;
+	/* Exact representation of correction coefficients. */
+	unsigned int shadow_coeffs[COEFF_MAX];
+};
+
+enum isl29501_register_name {
+	REG_DISTANCE,
+	REG_PHASE,
+	REG_TEMPERATURE,
+	REG_AMBIENT_LIGHT,
+	REG_GAIN,
+	REG_GAIN_BIAS,
+	REG_PHASE_EXP,
+	REG_CALIB_PHASE_TEMP_A,
+	REG_CALIB_PHASE_TEMP_B,
+	REG_CALIB_PHASE_LIGHT_A,
+	REG_CALIB_PHASE_LIGHT_B,
+	REG_DISTANCE_BIAS,
+	REG_TEMPERATURE_BIAS,
+	REG_INT_TIME,
+	REG_SAMPLE_TIME,
+	REG_DRIVER_RANGE,
+	REG_EMITTER_DAC,
+};
+
+struct isl29501_register_desc {
+	u8 msb;
+	u8 lsb;
+};
+
+static const struct isl29501_register_desc isl29501_registers[] = {
+	[REG_DISTANCE] = {
+		.msb = ISL29501_DISTANCE_MSB_DATA,
+		.lsb = ISL29501_DISTANCE_LSB_DATA,
+	},
+	[REG_PHASE] = {
+		.msb = ISL29501_PHASE_MSB,
+		.lsb = ISL29501_PHASE_LSB,
+	},
+	[REG_TEMPERATURE] = {
+		.lsb = ISL29501_DIE_TEMPERATURE,
+	},
+	[REG_AMBIENT_LIGHT] = {
+		.lsb = ISL29501_AMBIENT_LIGHT,
+	},
+	[REG_GAIN] = {
+		.msb = ISL29501_GAIN_MSB,
+		.lsb = ISL29501_GAIN_LSB,
+	},
+	[REG_GAIN_BIAS] = {
+		.msb = ISL29501_CROSSTALK_GAIN_MSB,
+		.lsb = ISL29501_CROSSTALK_GAIN_LSB,
+	},
+	[REG_PHASE_EXP] = {
+		.lsb = ISL29501_PHASE_EXPONENT,
+	},
+	[REG_CALIB_PHASE_TEMP_A] = {
+		.lsb = ISL29501_TEMP_COEFF_A,
+	},
+	[REG_CALIB_PHASE_TEMP_B] = {
+		.lsb = ISL29501_TEMP_COEFF_B,
+	},
+	[REG_CALIB_PHASE_LIGHT_A] = {
+		.lsb = ISL29501_AMBIANT_COEFF_A,
+	},
+	[REG_CALIB_PHASE_LIGHT_B] = {
+		.lsb = ISL29501_AMBIANT_COEFF_B,
+	},
+	[REG_DISTANCE_BIAS] = {
+		.msb = ISL29501_PHASE_OFFSET_MSB,
+		.lsb = ISL29501_PHASE_OFFSET_LSB,
+	},
+	[REG_TEMPERATURE_BIAS] = {
+		.lsb = ISL29501_TEMP_REFERENCE,
+	},
+	[REG_INT_TIME] = {
+		.lsb = ISL29501_INTEGRATION_PERIOD,
+	},
+	[REG_SAMPLE_TIME] = {
+		.lsb = ISL29501_SAMPLE_PERIOD,
+	},
+	[REG_DRIVER_RANGE] = {
+		.lsb = ISL29501_DRIVER_RANGE,
+	},
+	[REG_EMITTER_DAC] = {
+		.lsb = ISL29501_EMITTER_DAC,
+	},
+};
+
+static int isl29501_register_read(struct isl29501_private *isl29501,
+				  enum isl29501_register_name name,
+				  u32 *val)
+{
+	const struct isl29501_register_desc *reg = &isl29501_registers[name];
+	u8 msb = 0, lsb = 0;
+	s32 ret;
+
+	mutex_lock(&isl29501->lock);
+	if (reg->msb) {
+		ret = i2c_smbus_read_byte_data(isl29501->client, reg->msb);
+		if (ret < 0)
+			goto err;
+		msb = ret;
+	}
+
+	if (reg->lsb) {
+		ret = i2c_smbus_read_byte_data(isl29501->client, reg->lsb);
+		if (ret < 0)
+			goto err;
+		lsb = ret;
+	}
+	mutex_unlock(&isl29501->lock);
+
+	*val = (msb << 8) + lsb;
+
+	return 0;
+err:
+	mutex_unlock(&isl29501->lock);
+
+	return ret;
+}
+
+static u32 isl29501_register_write(struct isl29501_private *isl29501,
+				   enum isl29501_register_name name,
+				   u32 value)
+{
+	const struct isl29501_register_desc *reg = &isl29501_registers[name];
+	int ret;
+
+	if (!reg->msb && value > U8_MAX)
+		return -ERANGE;
+
+	if (value > U16_MAX)
+		return -ERANGE;
+
+	mutex_lock(&isl29501->lock);
+	if (reg->msb) {
+		ret = i2c_smbus_write_byte_data(isl29501->client,
+						reg->msb, value >> 8);
+		if (ret < 0)
+			goto err;
+	}
+
+	ret = i2c_smbus_write_byte_data(isl29501->client, reg->lsb, value);
+
+err:
+	mutex_unlock(&isl29501->lock);
+	return ret;
+}
+
+static ssize_t isl29501_read_ext(struct iio_dev *indio_dev,
+				 uintptr_t private,
+				 const struct iio_chan_spec *chan,
+				 char *buf)
+{
+	struct isl29501_private *isl29501 = iio_priv(indio_dev);
+	enum isl29501_register_name reg = private;
+	int ret;
+	u32 value, gain, coeff, exp;
+
+	switch (reg) {
+	case REG_GAIN:
+	case REG_GAIN_BIAS:
+		ret = isl29501_register_read(isl29501, reg, &gain);
+		if (ret < 0)
+			return ret;
+
+		value = gain;
+		break;
+	case REG_CALIB_PHASE_TEMP_A:
+	case REG_CALIB_PHASE_TEMP_B:
+	case REG_CALIB_PHASE_LIGHT_A:
+	case REG_CALIB_PHASE_LIGHT_B:
+		ret = isl29501_register_read(isl29501, REG_PHASE_EXP, &exp);
+		if (ret < 0)
+			return ret;
+
+		ret = isl29501_register_read(isl29501, reg, &coeff);
+		if (ret < 0)
+			return ret;
+
+		value = coeff << exp;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return sprintf(buf, "%u\n", value);
+}
+
+static int isl29501_set_shadow_coeff(struct isl29501_private *isl29501,
+				     enum isl29501_register_name reg,
+				     unsigned int val)
+{
+	enum isl29501_correction_coeff coeff;
+
+	switch (reg) {
+	case REG_CALIB_PHASE_TEMP_A:
+		coeff = COEFF_TEMP_A;
+		break;
+	case REG_CALIB_PHASE_TEMP_B:
+		coeff = COEFF_TEMP_B;
+		break;
+	case REG_CALIB_PHASE_LIGHT_A:
+		coeff = COEFF_LIGHT_A;
+		break;
+	case REG_CALIB_PHASE_LIGHT_B:
+		coeff = COEFF_LIGHT_B;
+		break;
+	default:
+		return -EINVAL;
+	}
+	isl29501->shadow_coeffs[coeff] = val;
+
+	return 0;
+}
+
+static int isl29501_write_coeff(struct isl29501_private *isl29501,
+				enum isl29501_correction_coeff coeff,
+				int val)
+{
+	enum isl29501_register_name reg;
+
+	switch (coeff) {
+	case COEFF_TEMP_A:
+		reg = REG_CALIB_PHASE_TEMP_A;
+		break;
+	case COEFF_TEMP_B:
+		reg = REG_CALIB_PHASE_TEMP_B;
+		break;
+	case COEFF_LIGHT_A:
+		reg = REG_CALIB_PHASE_LIGHT_A;
+		break;
+	case COEFF_LIGHT_B:
+		reg = REG_CALIB_PHASE_LIGHT_B;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return isl29501_register_write(isl29501, reg, val);
+}
+
+static unsigned int isl29501_find_corr_exp(unsigned int val,
+					   unsigned int max_exp,
+					   unsigned int max_mantissa)
+{
+	unsigned int exp = 1;
+
+	/*
+	 * Correction coefficients are represented under
+	 * mantissa * 2^exponent form, where mantissa and exponent
+	 * are stored in two separate registers of the sensor.
+	 *
+	 * Compute and return the lowest exponent such as:
+	 *	     mantissa = value / 2^exponent
+	 *
+	 *  where mantissa < max_mantissa.
+	 */
+	if (val <= max_mantissa)
+		return 0;
+
+	while ((val >> exp) > max_mantissa) {
+		exp++;
+
+		if (exp > max_exp)
+			return max_exp;
+	}
+
+	return exp;
+}
+
+static ssize_t isl29501_write_ext(struct iio_dev *indio_dev,
+				  uintptr_t private,
+				  const struct iio_chan_spec *chan,
+				  const char *buf, size_t len)
+{
+	struct isl29501_private *isl29501 = iio_priv(indio_dev);
+	enum isl29501_register_name reg = private;
+	unsigned int val;
+	int max_exp = 0;
+	int ret;
+	int i;
+
+	ret = kstrtouint(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	switch (reg) {
+	case REG_GAIN_BIAS:
+		if (val > U16_MAX)
+			return -ERANGE;
+
+		ret = isl29501_register_write(isl29501, reg, val);
+		if (ret < 0)
+			return ret;
+
+		break;
+	case REG_CALIB_PHASE_TEMP_A:
+	case REG_CALIB_PHASE_TEMP_B:
+	case REG_CALIB_PHASE_LIGHT_A:
+	case REG_CALIB_PHASE_LIGHT_B:
+
+		if (val > (U8_MAX << ISL29501_MAX_EXP_VAL))
+			return -ERANGE;
+
+		/* Store the correction coefficient under its exact form. */
+		ret = isl29501_set_shadow_coeff(isl29501, reg, val);
+		if (ret < 0)
+			return ret;
+
+		/*
+		 * Find the highest exponent needed to represent
+		 * correction coefficients.
+		 */
+		for (i = 0; i < COEFF_MAX; i++) {
+			int corr;
+			int corr_exp;
+
+			corr = isl29501->shadow_coeffs[i];
+			corr_exp = isl29501_find_corr_exp(corr,
+							  ISL29501_MAX_EXP_VAL,
+							  U8_MAX / 2);
+			dev_dbg(&isl29501->client->dev,
+				"found exp of corr(%d) = %d\n", corr, corr_exp);
+
+			max_exp = max(max_exp, corr_exp);
+		}
+
+		/*
+		 * Represent every correction coefficient under
+		 * mantissa * 2^max_exponent form and force the
+		 * writing of those coefficients on the sensor.
+		 */
+		for (i = 0; i < COEFF_MAX; i++) {
+			int corr;
+			int mantissa;
+
+			corr = isl29501->shadow_coeffs[i];
+			if (!corr)
+				continue;
+
+			mantissa = corr >> max_exp;
+
+			ret = isl29501_write_coeff(isl29501, i, mantissa);
+			if (ret < 0)
+				return ret;
+		}
+
+		ret = isl29501_register_write(isl29501, REG_PHASE_EXP, max_exp);
+		if (ret < 0)
+			return ret;
+
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return len;
+}
+
+#define _ISL29501_EXT_INFO(_name, _ident) { \
+	.name = _name, \
+	.read = isl29501_read_ext, \
+	.write = isl29501_write_ext, \
+	.private = _ident, \
+	.shared = IIO_SEPARATE, \
+}
+
+static const struct iio_chan_spec_ext_info isl29501_ext_info[] = {
+	_ISL29501_EXT_INFO("agc_gain", REG_GAIN),
+	_ISL29501_EXT_INFO("agc_gain_bias", REG_GAIN_BIAS),
+	_ISL29501_EXT_INFO("calib_phase_temp_a", REG_CALIB_PHASE_TEMP_A),
+	_ISL29501_EXT_INFO("calib_phase_temp_b", REG_CALIB_PHASE_TEMP_B),
+	_ISL29501_EXT_INFO("calib_phase_light_a", REG_CALIB_PHASE_LIGHT_A),
+	_ISL29501_EXT_INFO("calib_phase_light_b", REG_CALIB_PHASE_LIGHT_B),
+	{ },
+};
+
+#define ISL29501_DISTANCE_SCAN_INDEX 0
+#define ISL29501_TIMESTAMP_SCAN_INDEX 1
+
+static const struct iio_chan_spec isl29501_channels[] = {
+	{
+		.type = IIO_PROXIMITY,
+		.scan_index = ISL29501_DISTANCE_SCAN_INDEX,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW)   |
+			BIT(IIO_CHAN_INFO_SCALE) |
+			BIT(IIO_CHAN_INFO_CALIBBIAS),
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_CPU,
+		},
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_INT_TIME) |
+				BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.ext_info = isl29501_ext_info,
+	},
+	{
+		.type = IIO_PHASE,
+		.scan_index = -1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_SCALE),
+	},
+	{
+		.type = IIO_CURRENT,
+		.scan_index = -1,
+		.output = 1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_SCALE),
+	},
+	{
+		.type = IIO_TEMP,
+		.scan_index = -1,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_SCALE)     |
+				BIT(IIO_CHAN_INFO_CALIBBIAS),
+	},
+	{
+		.type = IIO_INTENSITY,
+		.scan_index = -1,
+		.modified = 1,
+		.channel2 = IIO_MOD_LIGHT_CLEAR,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_SCALE),
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(ISL29501_TIMESTAMP_SCAN_INDEX),
+};
+
+static int isl29501_reset_registers(struct isl29501_private *isl29501)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(isl29501->client,
+					ISL29501_COMMAND_REGISTER,
+					ISL29501_RESET_ALL_REGISTERS);
+	if (ret < 0) {
+		dev_err(&isl29501->client->dev,
+			"cannot reset registers %d\n", ret);
+		return ret;
+	}
+
+	ret = i2c_smbus_write_byte_data(isl29501->client,
+					ISL29501_COMMAND_REGISTER,
+					ISL29501_RESET_INT_SM);
+	if (ret < 0)
+		dev_err(&isl29501->client->dev,
+			"cannot reset state machine %d\n", ret);
+
+	return ret;
+}
+
+static int isl29501_begin_acquisition(struct isl29501_private *isl29501)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(isl29501->client,
+					ISL29501_COMMAND_REGISTER,
+					ISL29501_EMUL_SAMPLE_START_PIN);
+	if (ret < 0)
+		dev_err(&isl29501->client->dev,
+			"cannot begin acquisition %d\n", ret);
+
+	return ret;
+}
+
+static IIO_CONST_ATTR_INT_TIME_AVAIL(ISL29501_INT_TIME_AVAILABLE);
+static IIO_CONST_ATTR(out_current_scale_available,
+		      ISL29501_CURRENT_SCALE_AVAILABLE);
+
+static struct attribute *isl29501_attributes[] = {
+	&iio_const_attr_integration_time_available.dev_attr.attr,
+	&iio_const_attr_out_current_scale_available.dev_attr.attr,
+	NULL
+};
+
+static const struct attribute_group isl29501_attribute_group = {
+	.attrs = isl29501_attributes,
+};
+
+static const int isl29501_current_scale_table[][2] = {
+	{0, 3900}, {0, 7800}, {0, 11800}, {0, 15700},
+	{0, 19600}, {0, 23500}, {0, 27500}, {0, 31400},
+	{0, 35200}, {0, 39200}, {0, 43100}, {0, 47100},
+	{0, 51000}, {0, 54900}, {0, 58800},
+};
+
+static const int isl29501_int_time[][2] = {
+	{0, 70},    /* 0.07 ms */
+	{0, 140},   /* 0.14 ms */
+	{0, 280},   /* 0.28 ms */
+	{0, 570},   /* 0.57 ms */
+	{0, 1140},  /* 1.14 ms */
+	{0, 2280},  /* 2.28 ms */
+	{0, 4550},  /* 4.55 ms */
+	{0, 9100},  /* 9.11 ms */
+	{0, 18200}, /* 18.2 ms */
+	{0, 36400}, /* 36.4 ms */
+	{0, 72810}, /* 72.81 ms */
+	{0, 145610} /* 145.28 ms */
+};
+
+static int isl29501_get_raw(struct isl29501_private *isl29501,
+			    const struct iio_chan_spec *chan,
+			    int *raw)
+{
+	int ret;
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		ret = isl29501_register_read(isl29501, REG_DISTANCE, raw);
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_INTENSITY:
+		ret = isl29501_register_read(isl29501,
+					     REG_AMBIENT_LIGHT,
+					     raw);
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_PHASE:
+		ret = isl29501_register_read(isl29501, REG_PHASE, raw);
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_CURRENT:
+		ret = isl29501_register_read(isl29501, REG_EMITTER_DAC, raw);
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_TEMP:
+		ret = isl29501_register_read(isl29501, REG_TEMPERATURE, raw);
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int isl29501_get_scale(struct isl29501_private *isl29501,
+			      const struct iio_chan_spec *chan,
+			      int *val, int *val2)
+{
+	int ret;
+	u32 current_scale;
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		/* distance = raw_distance * 33.31 / 65536 (m) */
+		*val = 3331;
+		*val2 = 6553600;
+
+		return IIO_VAL_FRACTIONAL;
+	case IIO_PHASE:
+		/* phase = raw_phase * 2pi / 65536 (rad) */
+		*val = 0;
+		*val2 = 95874;
+
+		return IIO_VAL_INT_PLUS_NANO;
+	case IIO_INTENSITY:
+		/* light = raw_light * 35 / 10000 (mA) */
+		*val = 35;
+		*val2 = 10000;
+
+		return IIO_VAL_FRACTIONAL;
+	case IIO_CURRENT:
+		ret = isl29501_register_read(isl29501,
+					     REG_DRIVER_RANGE,
+					     &current_scale);
+		if (ret < 0)
+			return ret;
+
+		if (current_scale > ARRAY_SIZE(isl29501_current_scale_table))
+			return -EINVAL;
+
+		if (!current_scale) {
+			*val = 0;
+			*val2 = 0;
+			return IIO_VAL_INT;
+		}
+
+		*val = isl29501_current_scale_table[current_scale - 1][0];
+		*val2 = isl29501_current_scale_table[current_scale - 1][1];
+
+		return IIO_VAL_INT_PLUS_MICRO;
+	case IIO_TEMP:
+		/* temperature = raw_temperature * 125 / 100000 (milli °C) */
+		*val = 125;
+		*val2 = 100000;
+
+		return IIO_VAL_FRACTIONAL;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int isl29501_get_calibbias(struct isl29501_private *isl29501,
+				  const struct iio_chan_spec *chan,
+				  int *bias)
+{
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		return isl29501_register_read(isl29501,
+					      REG_DISTANCE_BIAS,
+					      bias);
+	case IIO_TEMP:
+		return isl29501_register_read(isl29501,
+					      REG_TEMPERATURE_BIAS,
+					      bias);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int isl29501_get_inttime(struct isl29501_private *isl29501,
+				int *val, int *val2)
+{
+	int ret;
+	u32 inttime;
+
+	ret = isl29501_register_read(isl29501, REG_INT_TIME, &inttime);
+	if (ret < 0)
+		return ret;
+
+	if (inttime >= ARRAY_SIZE(isl29501_int_time))
+		return -EINVAL;
+
+	*val = isl29501_int_time[inttime][0];
+	*val2 = isl29501_int_time[inttime][1];
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int isl29501_get_freq(struct isl29501_private *isl29501,
+			     int *val, int *val2)
+{
+	int ret;
+	int sample_time;
+	unsigned long long freq;
+	u32 temp;
+
+	ret = isl29501_register_read(isl29501, REG_SAMPLE_TIME, &sample_time);
+	if (ret < 0)
+		return ret;
+
+	/* freq = 1 / (0.000450 * (sample_time + 1) * 10^-6) */
+	freq = 1000000ULL * 1000000ULL;
+
+	do_div(freq, 450 * (sample_time + 1));
+
+	temp = do_div(freq, 1000000);
+	*val = freq;
+	*val2 = temp;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int isl29501_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, int *val,
+			     int *val2, long mask)
+{
+	struct isl29501_private *isl29501 = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		return isl29501_get_raw(isl29501, chan, val);
+	case IIO_CHAN_INFO_SCALE:
+		return isl29501_get_scale(isl29501, chan, val, val2);
+	case IIO_CHAN_INFO_INT_TIME:
+		return isl29501_get_inttime(isl29501, val, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return isl29501_get_freq(isl29501, val, val2);
+	case IIO_CHAN_INFO_CALIBBIAS:
+		return isl29501_get_calibbias(isl29501, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int isl29501_set_raw(struct isl29501_private *isl29501,
+			    const struct iio_chan_spec *chan,
+			    int raw)
+{
+	switch (chan->type) {
+	case IIO_CURRENT:
+		return isl29501_register_write(isl29501, REG_EMITTER_DAC, raw);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int isl29501_set_inttime(struct isl29501_private *isl29501,
+				int val, int val2)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(isl29501_int_time); i++) {
+		if (isl29501_int_time[i][0] == val &&
+		    isl29501_int_time[i][1] == val2) {
+			return isl29501_register_write(isl29501,
+						       REG_INT_TIME,
+						       i);
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int isl29501_set_scale(struct isl29501_private *isl29501,
+			      const struct iio_chan_spec *chan,
+			      int val, int val2)
+{
+	int i;
+
+	if (chan->type != IIO_CURRENT)
+		return -EINVAL;
+
+	for (i = 0; i < ARRAY_SIZE(isl29501_current_scale_table); i++) {
+		if (isl29501_current_scale_table[i][0] == val &&
+		    isl29501_current_scale_table[i][1] == val2) {
+			return isl29501_register_write(isl29501,
+						       REG_DRIVER_RANGE,
+						       i + 1);
+		}
+	}
+
+	return -EINVAL;
+}
+
+static int isl29501_set_calibbias(struct isl29501_private *isl29501,
+				  const struct iio_chan_spec *chan,
+				  int bias)
+{
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		return isl29501_register_write(isl29501,
+					      REG_DISTANCE_BIAS,
+					      bias);
+	case IIO_TEMP:
+		return isl29501_register_write(isl29501,
+					       REG_TEMPERATURE_BIAS,
+					       bias);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int isl29501_set_freq(struct isl29501_private *isl29501,
+			     int val, int val2)
+{
+	int freq;
+	unsigned long long sample_time;
+
+	/* sample_freq = 1 / (0.000450 * (sample_time + 1) * 10^-6) */
+	freq = val * 1000000 + val2 % 1000000;
+	sample_time = 2222ULL * 1000000ULL;
+	do_div(sample_time, freq);
+
+	sample_time -= 1;
+
+	if (sample_time > 255)
+		return -ERANGE;
+
+	return isl29501_register_write(isl29501, REG_SAMPLE_TIME, sample_time);
+}
+
+static int isl29501_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct isl29501_private *isl29501 = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		return isl29501_set_raw(isl29501, chan, val);
+	case IIO_CHAN_INFO_INT_TIME:
+		return isl29501_set_inttime(isl29501, val, val2);
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return isl29501_set_freq(isl29501, val, val2);
+	case IIO_CHAN_INFO_SCALE:
+		return isl29501_set_scale(isl29501, chan, val, val2);
+	case IIO_CHAN_INFO_CALIBBIAS:
+		return isl29501_set_calibbias(isl29501, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info isl29501_info = {
+	.read_raw = &isl29501_read_raw,
+	.write_raw = &isl29501_write_raw,
+	.attrs = &isl29501_attribute_group,
+};
+
+static int isl29501_init_chip(struct isl29501_private *isl29501)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(isl29501->client, ISL29501_DEVICE_ID);
+	if (ret < 0) {
+		dev_err(&isl29501->client->dev, "Error reading device id\n");
+		return ret;
+	}
+
+	if (ret != ISL29501_ID) {
+		dev_err(&isl29501->client->dev,
+			"Wrong chip id, got %x expected %x\n",
+			ret, ISL29501_DEVICE_ID);
+		return -ENODEV;
+	}
+
+	ret = isl29501_reset_registers(isl29501);
+	if (ret < 0)
+		return ret;
+
+	return isl29501_begin_acquisition(isl29501);
+}
+
+static irqreturn_t isl29501_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct isl29501_private *isl29501 = iio_priv(indio_dev);
+	const unsigned long *active_mask = indio_dev->active_scan_mask;
+	u32 buffer[4] __aligned(8) = {}; /* 1x16-bit + naturally aligned ts */
+
+	if (test_bit(ISL29501_DISTANCE_SCAN_INDEX, active_mask))
+		isl29501_register_read(isl29501, REG_DISTANCE, buffer);
+
+	iio_push_to_buffers_with_timestamp(indio_dev, buffer, pf->timestamp);
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int isl29501_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct isl29501_private *isl29501;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*isl29501));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	isl29501 = iio_priv(indio_dev);
+
+	i2c_set_clientdata(client, indio_dev);
+	isl29501->client = client;
+
+	mutex_init(&isl29501->lock);
+
+	ret = isl29501_init_chip(isl29501);
+	if (ret < 0)
+		return ret;
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = isl29501_channels;
+	indio_dev->num_channels = ARRAY_SIZE(isl29501_channels);
+	indio_dev->name = client->name;
+	indio_dev->info = &isl29501_info;
+
+	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
+					      iio_pollfunc_store_time,
+					      isl29501_trigger_handler,
+					      NULL);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to setup iio triggered buffer\n");
+		return ret;
+	}
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id isl29501_id[] = {
+	{"isl29501", 0},
+	{}
+};
+
+MODULE_DEVICE_TABLE(i2c, isl29501_id);
+
+#if defined(CONFIG_OF)
+static const struct of_device_id isl29501_i2c_matches[] = {
+	{ .compatible = "renesas,isl29501" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, isl29501_i2c_matches);
+#endif
+
+static struct i2c_driver isl29501_driver = {
+	.driver = {
+		.name	= "isl29501",
+	},
+	.id_table	= isl29501_id,
+	.probe		= isl29501_probe,
+};
+module_i2c_driver(isl29501_driver);
+
+MODULE_AUTHOR("Mathieu Othacehe <m.othacehe@gmail.com>");
+MODULE_DESCRIPTION("ISL29501 Time of Flight sensor driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/proximity/mb1232.c b/drivers/iio/proximity/mb1232.c
new file mode 100644
index 000000000..0bca5f74d
--- /dev/null
+++ b/drivers/iio/proximity/mb1232.c
@@ -0,0 +1,274 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * mb1232.c - Support for MaxBotix I2CXL-MaxSonar-EZ series ultrasonic
+ *   ranger with i2c interface
+ * actually tested with mb1232 type
+ *
+ * Copyright (c) 2019 Andreas Klinger <ak@it-klinger.de>
+ *
+ * For details about the device see:
+ * https://www.maxbotix.com/documents/I2CXL-MaxSonar-EZ_Datasheet.pdf
+ */
+
+#include <linux/bitops.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/property.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+/* registers of MaxSonar device */
+#define MB1232_RANGE_COMMAND	0x51	/* Command for reading range */
+#define MB1232_ADDR_UNLOCK_1	0xAA	/* Command 1 for changing address */
+#define MB1232_ADDR_UNLOCK_2	0xA5	/* Command 2 for changing address */
+
+struct mb1232_data {
+	struct i2c_client	*client;
+
+	struct mutex		lock;
+
+	/*
+	 * optionally a gpio can be used to announce when ranging has
+	 * finished
+	 * since we are just using the falling trigger of it we request
+	 * only the interrupt for announcing when data is ready to be read
+	 */
+	struct completion	ranging;
+	int			irqnr;
+	/* Ensure correct alignment of data to push to IIO buffer */
+	struct {
+		s16 distance;
+		s64 ts __aligned(8);
+	} scan;
+};
+
+static irqreturn_t mb1232_handle_irq(int irq, void *dev_id)
+{
+	struct iio_dev *indio_dev = dev_id;
+	struct mb1232_data *data = iio_priv(indio_dev);
+
+	complete(&data->ranging);
+
+	return IRQ_HANDLED;
+}
+
+static s16 mb1232_read_distance(struct mb1232_data *data)
+{
+	struct i2c_client *client = data->client;
+	int ret;
+	s16 distance;
+	__be16 buf;
+
+	mutex_lock(&data->lock);
+
+	reinit_completion(&data->ranging);
+
+	ret = i2c_smbus_write_byte(client, MB1232_RANGE_COMMAND);
+	if (ret < 0) {
+		dev_err(&client->dev, "write command - err: %d\n", ret);
+		goto error_unlock;
+	}
+
+	if (data->irqnr >= 0) {
+		/* it cannot take more than 100 ms */
+		ret = wait_for_completion_killable_timeout(&data->ranging,
+									HZ/10);
+		if (ret < 0)
+			goto error_unlock;
+		else if (ret == 0) {
+			ret = -ETIMEDOUT;
+			goto error_unlock;
+		}
+	} else {
+		/* use simple sleep if announce irq is not connected */
+		msleep(15);
+	}
+
+	ret = i2c_master_recv(client, (char *)&buf, sizeof(buf));
+	if (ret < 0) {
+		dev_err(&client->dev, "i2c_master_recv: ret=%d\n", ret);
+		goto error_unlock;
+	}
+
+	distance = __be16_to_cpu(buf);
+	/* check for not returning misleading error codes */
+	if (distance < 0) {
+		dev_err(&client->dev, "distance=%d\n", distance);
+		ret = -EINVAL;
+		goto error_unlock;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return distance;
+
+error_unlock:
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static irqreturn_t mb1232_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct mb1232_data *data = iio_priv(indio_dev);
+
+	data->scan.distance = mb1232_read_distance(data);
+	if (data->scan.distance < 0)
+		goto err;
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
+					   pf->timestamp);
+
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+static int mb1232_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *channel, int *val,
+			    int *val2, long mask)
+{
+	struct mb1232_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (channel->type != IIO_DISTANCE)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = mb1232_read_distance(data);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		/* 1 LSB is 1 cm */
+		*val = 0;
+		*val2 = 10000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_chan_spec mb1232_channels[] = {
+	{
+		.type = IIO_DISTANCE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_CPU,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct iio_info mb1232_info = {
+	.read_raw = mb1232_read_raw,
+};
+
+static int mb1232_probe(struct i2c_client *client,
+					 const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct mb1232_data *data;
+	int ret;
+	struct device *dev = &client->dev;
+
+	if (!i2c_check_functionality(client->adapter,
+					I2C_FUNC_SMBUS_READ_BYTE |
+					I2C_FUNC_SMBUS_WRITE_BYTE))
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+
+	indio_dev->info = &mb1232_info;
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = mb1232_channels;
+	indio_dev->num_channels = ARRAY_SIZE(mb1232_channels);
+
+	mutex_init(&data->lock);
+
+	init_completion(&data->ranging);
+
+	data->irqnr = fwnode_irq_get(dev_fwnode(&client->dev), 0);
+	if (data->irqnr <= 0) {
+		/* usage of interrupt is optional */
+		data->irqnr = -1;
+	} else {
+		ret = devm_request_irq(dev, data->irqnr, mb1232_handle_irq,
+				IRQF_TRIGGER_FALLING, id->name, indio_dev);
+		if (ret < 0) {
+			dev_err(dev, "request_irq: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+			iio_pollfunc_store_time, mb1232_trigger_handler, NULL);
+	if (ret < 0) {
+		dev_err(dev, "setup of iio triggered buffer failed\n");
+		return ret;
+	}
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct of_device_id of_mb1232_match[] = {
+	{ .compatible = "maxbotix,mb1202", },
+	{ .compatible = "maxbotix,mb1212", },
+	{ .compatible = "maxbotix,mb1222", },
+	{ .compatible = "maxbotix,mb1232", },
+	{ .compatible = "maxbotix,mb1242", },
+	{ .compatible = "maxbotix,mb7040", },
+	{ .compatible = "maxbotix,mb7137", },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, of_mb1232_match);
+
+static const struct i2c_device_id mb1232_id[] = {
+	{ "maxbotix-mb1202", },
+	{ "maxbotix-mb1212", },
+	{ "maxbotix-mb1222", },
+	{ "maxbotix-mb1232", },
+	{ "maxbotix-mb1242", },
+	{ "maxbotix-mb7040", },
+	{ "maxbotix-mb7137", },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mb1232_id);
+
+static struct i2c_driver mb1232_driver = {
+	.driver = {
+		.name	= "maxbotix-mb1232",
+		.of_match_table	= of_mb1232_match,
+	},
+	.probe = mb1232_probe,
+	.id_table = mb1232_id,
+};
+module_i2c_driver(mb1232_driver);
+
+MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
+MODULE_DESCRIPTION("Maxbotix I2CXL-MaxSonar i2c ultrasonic ranger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/proximity/ping.c b/drivers/iio/proximity/ping.c
new file mode 100644
index 000000000..2ad69b150
--- /dev/null
+++ b/drivers/iio/proximity/ping.c
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * PING: ultrasonic sensor for distance measuring by using only one GPIOs
+ *
+ * Copyright (c) 2019 Andreas Klinger <ak@it-klinger.de>
+ *
+ * For details about the devices see:
+ * http://parallax.com/sites/default/files/downloads/28041-LaserPING-2m-Rangefinder-Guide.pdf
+ * http://parallax.com/sites/default/files/downloads/28015-PING-Documentation-v1.6.pdf
+ *
+ * the measurement cycle as timing diagram looks like:
+ *
+ * GPIO      ___              ________________________
+ * ping:  __/   \____________/                        \________________
+ *          ^   ^            ^                        ^
+ *          |<->|            interrupt                interrupt
+ *         udelay(5)         (ts_rising)              (ts_falling)
+ *                           |<---------------------->|
+ *                           .  pulse time measured   .
+ *                           .  --> one round trip of ultra sonic waves
+ * ultra                     .                        .
+ * sonic            _   _   _.                        .
+ * burst: _________/ \_/ \_/ \_________________________________________
+ *                                                    .
+ * ultra                                              .
+ * sonic                                     _   _   _.
+ * echo:  __________________________________/ \_/ \_/ \________________
+ */
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+struct ping_cfg {
+	unsigned long	trigger_pulse_us;	/* length of trigger pulse */
+	int		laserping_error;	/* support error code in */
+						/*   pulse width of laser */
+						/*   ping sensors */
+	s64		timeout_ns;		/* timeout in ns */
+};
+
+struct ping_data {
+	struct device		*dev;
+	struct gpio_desc	*gpiod_ping;
+	struct mutex		lock;
+	int			irqnr;
+	ktime_t			ts_rising;
+	ktime_t			ts_falling;
+	struct completion	rising;
+	struct completion	falling;
+	const struct ping_cfg	*cfg;
+};
+
+static const struct ping_cfg pa_ping_cfg = {
+	.trigger_pulse_us	= 5,
+	.laserping_error	= 0,
+	.timeout_ns		= 18500000,	/* 3 meters */
+};
+
+static const struct ping_cfg pa_laser_ping_cfg = {
+	.trigger_pulse_us	= 5,
+	.laserping_error	= 1,
+	.timeout_ns		= 15500000,	/* 2 meters plus error codes */
+};
+
+static irqreturn_t ping_handle_irq(int irq, void *dev_id)
+{
+	struct iio_dev *indio_dev = dev_id;
+	struct ping_data *data = iio_priv(indio_dev);
+	ktime_t now = ktime_get();
+
+	if (gpiod_get_value(data->gpiod_ping)) {
+		data->ts_rising = now;
+		complete(&data->rising);
+	} else {
+		data->ts_falling = now;
+		complete(&data->falling);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int ping_read(struct iio_dev *indio_dev)
+{
+	struct ping_data *data = iio_priv(indio_dev);
+	int ret;
+	ktime_t ktime_dt;
+	s64 dt_ns;
+	u32 time_ns, distance_mm;
+	struct platform_device *pdev = to_platform_device(data->dev);
+
+	/*
+	 * just one read-echo-cycle can take place at a time
+	 * ==> lock against concurrent reading calls
+	 */
+	mutex_lock(&data->lock);
+
+	reinit_completion(&data->rising);
+	reinit_completion(&data->falling);
+
+	gpiod_set_value(data->gpiod_ping, 1);
+	udelay(data->cfg->trigger_pulse_us);
+	gpiod_set_value(data->gpiod_ping, 0);
+
+	ret = gpiod_direction_input(data->gpiod_ping);
+	if (ret < 0) {
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	data->irqnr = gpiod_to_irq(data->gpiod_ping);
+	if (data->irqnr < 0) {
+		dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr);
+		mutex_unlock(&data->lock);
+		return data->irqnr;
+	}
+
+	ret = request_irq(data->irqnr, ping_handle_irq,
+				IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+							pdev->name, indio_dev);
+	if (ret < 0) {
+		dev_err(data->dev, "request_irq: %d\n", ret);
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	/* it should not take more than 20 ms until echo is rising */
+	ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
+	if (ret < 0)
+		goto err_reset_direction;
+	else if (ret == 0) {
+		ret = -ETIMEDOUT;
+		goto err_reset_direction;
+	}
+
+	/* it cannot take more than 50 ms until echo is falling */
+	ret = wait_for_completion_killable_timeout(&data->falling, HZ/20);
+	if (ret < 0)
+		goto err_reset_direction;
+	else if (ret == 0) {
+		ret = -ETIMEDOUT;
+		goto err_reset_direction;
+	}
+
+	ktime_dt = ktime_sub(data->ts_falling, data->ts_rising);
+
+	free_irq(data->irqnr, indio_dev);
+
+	ret = gpiod_direction_output(data->gpiod_ping, GPIOD_OUT_LOW);
+	if (ret < 0) {
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	mutex_unlock(&data->lock);
+
+	dt_ns = ktime_to_ns(ktime_dt);
+	if (dt_ns > data->cfg->timeout_ns) {
+		dev_dbg(data->dev, "distance out of range: dt=%lldns\n",
+								dt_ns);
+		return -EIO;
+	}
+
+	time_ns = dt_ns;
+
+	/*
+	 * read error code of laser ping sensor and give users chance to
+	 * figure out error by using dynamic debugging
+	 */
+	if (data->cfg->laserping_error) {
+		if ((time_ns > 12500000) && (time_ns <= 13500000)) {
+			dev_dbg(data->dev, "target too close or to far\n");
+			return -EIO;
+		}
+		if ((time_ns > 13500000) && (time_ns <= 14500000)) {
+			dev_dbg(data->dev, "internal sensor error\n");
+			return -EIO;
+		}
+		if ((time_ns > 14500000) && (time_ns <= 15500000)) {
+			dev_dbg(data->dev, "internal sensor timeout\n");
+			return -EIO;
+		}
+	}
+
+	/*
+	 * the speed as function of the temperature is approximately:
+	 *
+	 * speed = 331,5 + 0,6 * Temp
+	 *   with Temp in °C
+	 *   and speed in m/s
+	 *
+	 * use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the
+	 * temperature
+	 *
+	 * therefore:
+	 *             time     343,5     time * 232
+	 * distance = ------ * ------- = ------------
+	 *             10^6         2        1350800
+	 *   with time in ns
+	 *   and distance in mm (one way)
+	 *
+	 * because we limit to 3 meters the multiplication with 232 just
+	 * fits into 32 bit
+	 */
+	distance_mm = time_ns * 232 / 1350800;
+
+	return distance_mm;
+
+err_reset_direction:
+	free_irq(data->irqnr, indio_dev);
+	mutex_unlock(&data->lock);
+
+	if (gpiod_direction_output(data->gpiod_ping, GPIOD_OUT_LOW))
+		dev_dbg(data->dev, "error in gpiod_direction_output\n");
+	return ret;
+}
+
+static int ping_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *channel, int *val,
+			    int *val2, long info)
+{
+	int ret;
+
+	if (channel->type != IIO_DISTANCE)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		ret = ping_read(indio_dev);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		/*
+		 * maximum resolution in datasheet is 1 mm
+		 * 1 LSB is 1 mm
+		 */
+		*val = 0;
+		*val2 = 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info ping_iio_info = {
+	.read_raw		= ping_read_raw,
+};
+
+static const struct iio_chan_spec ping_chan_spec[] = {
+	{
+		.type = IIO_DISTANCE,
+		.info_mask_separate =
+				BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static const struct of_device_id of_ping_match[] = {
+	{ .compatible = "parallax,ping", .data = &pa_ping_cfg },
+	{ .compatible = "parallax,laserping", .data = &pa_laser_ping_cfg },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, of_ping_match);
+
+static int ping_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct ping_data *data;
+	struct iio_dev *indio_dev;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(struct ping_data));
+	if (!indio_dev) {
+		dev_err(dev, "failed to allocate IIO device\n");
+		return -ENOMEM;
+	}
+
+	data = iio_priv(indio_dev);
+	data->dev = dev;
+	data->cfg = device_get_match_data(dev);
+
+	mutex_init(&data->lock);
+	init_completion(&data->rising);
+	init_completion(&data->falling);
+
+	data->gpiod_ping = devm_gpiod_get(dev, "ping", GPIOD_OUT_LOW);
+	if (IS_ERR(data->gpiod_ping)) {
+		dev_err(dev, "failed to get ping-gpios: err=%ld\n",
+						PTR_ERR(data->gpiod_ping));
+		return PTR_ERR(data->gpiod_ping);
+	}
+
+	if (gpiod_cansleep(data->gpiod_ping)) {
+		dev_err(data->dev, "cansleep-GPIOs not supported\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	indio_dev->name = "ping";
+	indio_dev->info = &ping_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = ping_chan_spec;
+	indio_dev->num_channels = ARRAY_SIZE(ping_chan_spec);
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static struct platform_driver ping_driver = {
+	.probe		= ping_probe,
+	.driver		= {
+		.name		= "ping-gpio",
+		.of_match_table	= of_ping_match,
+	},
+};
+
+module_platform_driver(ping_driver);
+
+MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
+MODULE_DESCRIPTION("PING sensors for distance measuring using one GPIOs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ping");
diff --git a/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
new file mode 100644
index 000000000..791a33d52
--- /dev/null
+++ b/drivers/iio/proximity/pulsedlight-lidar-lite-v2.c
@@ -0,0 +1,377 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * pulsedlight-lidar-lite-v2.c - Support for PulsedLight LIDAR sensor
+ *
+ * Copyright (C) 2015, 2017-2018
+ * Author: Matt Ranostay <matt.ranostay@konsulko.com>
+ *
+ * TODO: interrupt mode, and signal strength reporting
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/pm_runtime.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define LIDAR_REG_CONTROL		0x00
+#define LIDAR_REG_CONTROL_ACQUIRE	BIT(2)
+
+#define LIDAR_REG_STATUS		0x01
+#define LIDAR_REG_STATUS_INVALID	BIT(3)
+#define LIDAR_REG_STATUS_READY		BIT(0)
+
+#define LIDAR_REG_DATA_HBYTE		0x0f
+#define LIDAR_REG_DATA_LBYTE		0x10
+#define LIDAR_REG_DATA_WORD_READ	BIT(7)
+
+#define LIDAR_REG_PWR_CONTROL	0x65
+
+#define LIDAR_DRV_NAME "lidar"
+
+struct lidar_data {
+	struct iio_dev *indio_dev;
+	struct i2c_client *client;
+
+	int (*xfer)(struct lidar_data *data, u8 reg, u8 *val, int len);
+	int i2c_enabled;
+
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		u16 chan;
+		s64 timestamp __aligned(8);
+	} scan;
+};
+
+static const struct iio_chan_spec lidar_channels[] = {
+	{
+		.type = IIO_DISTANCE,
+		.info_mask_separate =
+			BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 16,
+			.storagebits = 16,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static int lidar_i2c_xfer(struct lidar_data *data, u8 reg, u8 *val, int len)
+{
+	struct i2c_client *client = data->client;
+	struct i2c_msg msg[2];
+	int ret;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = client->flags | I2C_M_STOP;
+	msg[0].len = 1;
+	msg[0].buf  = (char *) &reg;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = client->flags | I2C_M_RD;
+	msg[1].len = len;
+	msg[1].buf = (char *) val;
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+
+	return (ret == 2) ? 0 : -EIO;
+}
+
+static int lidar_smbus_xfer(struct lidar_data *data, u8 reg, u8 *val, int len)
+{
+	struct i2c_client *client = data->client;
+	int ret;
+
+	/*
+	 * Device needs a STOP condition between address write, and data read
+	 * so in turn i2c_smbus_read_byte_data cannot be used
+	 */
+
+	while (len--) {
+		ret = i2c_smbus_write_byte(client, reg++);
+		if (ret < 0) {
+			dev_err(&client->dev, "cannot write addr value");
+			return ret;
+		}
+
+		ret = i2c_smbus_read_byte(client);
+		if (ret < 0) {
+			dev_err(&client->dev, "cannot read data value");
+			return ret;
+		}
+
+		*(val++) = ret;
+	}
+
+	return 0;
+}
+
+static int lidar_read_byte(struct lidar_data *data, u8 reg)
+{
+	int ret;
+	u8 val;
+
+	ret = data->xfer(data, reg, &val, 1);
+	if (ret < 0)
+		return ret;
+
+	return val;
+}
+
+static inline int lidar_write_control(struct lidar_data *data, int val)
+{
+	return i2c_smbus_write_byte_data(data->client, LIDAR_REG_CONTROL, val);
+}
+
+static inline int lidar_write_power(struct lidar_data *data, int val)
+{
+	return i2c_smbus_write_byte_data(data->client,
+					 LIDAR_REG_PWR_CONTROL, val);
+}
+
+static int lidar_read_measurement(struct lidar_data *data, u16 *reg)
+{
+	__be16 value;
+	int ret = data->xfer(data, LIDAR_REG_DATA_HBYTE |
+			(data->i2c_enabled ? LIDAR_REG_DATA_WORD_READ : 0),
+			(u8 *) &value, 2);
+
+	if (!ret)
+		*reg = be16_to_cpu(value);
+
+	return ret;
+}
+
+static int lidar_get_measurement(struct lidar_data *data, u16 *reg)
+{
+	struct i2c_client *client = data->client;
+	int tries = 10;
+	int ret;
+
+	ret = pm_runtime_resume_and_get(&client->dev);
+	if (ret < 0)
+		return ret;
+
+	/* start sample */
+	ret = lidar_write_control(data, LIDAR_REG_CONTROL_ACQUIRE);
+	if (ret < 0) {
+		dev_err(&client->dev, "cannot send start measurement command");
+		pm_runtime_put_noidle(&client->dev);
+		return ret;
+	}
+
+	while (tries--) {
+		usleep_range(1000, 2000);
+
+		ret = lidar_read_byte(data, LIDAR_REG_STATUS);
+		if (ret < 0)
+			break;
+
+		/* return -EINVAL since laser is likely pointed out of range */
+		if (ret & LIDAR_REG_STATUS_INVALID) {
+			*reg = 0;
+			ret = -EINVAL;
+			break;
+		}
+
+		/* sample ready to read */
+		if (!(ret & LIDAR_REG_STATUS_READY)) {
+			ret = lidar_read_measurement(data, reg);
+			break;
+		}
+		ret = -EIO;
+	}
+	pm_runtime_mark_last_busy(&client->dev);
+	pm_runtime_put_autosuspend(&client->dev);
+
+	return ret;
+}
+
+static int lidar_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val, int *val2, long mask)
+{
+	struct lidar_data *data = iio_priv(indio_dev);
+	int ret = -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW: {
+		u16 reg;
+
+		if (iio_device_claim_direct_mode(indio_dev))
+			return -EBUSY;
+
+		ret = lidar_get_measurement(data, &reg);
+		if (!ret) {
+			*val = reg;
+			ret = IIO_VAL_INT;
+		}
+		iio_device_release_direct_mode(indio_dev);
+		break;
+	}
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = 10000;
+		ret = IIO_VAL_INT_PLUS_MICRO;
+		break;
+	}
+
+	return ret;
+}
+
+static irqreturn_t lidar_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct lidar_data *data = iio_priv(indio_dev);
+	int ret;
+
+	ret = lidar_get_measurement(data, &data->scan.chan);
+	if (!ret) {
+		iio_push_to_buffers_with_timestamp(indio_dev, &data->scan,
+						   iio_get_time_ns(indio_dev));
+	} else if (ret != -EINVAL) {
+		dev_err(&data->client->dev, "cannot read LIDAR measurement");
+	}
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_info lidar_info = {
+	.read_raw = lidar_read_raw,
+};
+
+static int lidar_probe(struct i2c_client *client,
+		       const struct i2c_device_id *id)
+{
+	struct lidar_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+	data = iio_priv(indio_dev);
+
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		data->xfer = lidar_i2c_xfer;
+		data->i2c_enabled = 1;
+	} else if (i2c_check_functionality(client->adapter,
+				I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BYTE))
+		data->xfer = lidar_smbus_xfer;
+	else
+		return -EOPNOTSUPP;
+
+	indio_dev->info = &lidar_info;
+	indio_dev->name = LIDAR_DRV_NAME;
+	indio_dev->channels = lidar_channels;
+	indio_dev->num_channels = ARRAY_SIZE(lidar_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	data->client = client;
+	data->indio_dev = indio_dev;
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 lidar_trigger_handler, NULL);
+	if (ret)
+		return ret;
+
+	ret = iio_device_register(indio_dev);
+	if (ret)
+		goto error_unreg_buffer;
+
+	pm_runtime_set_autosuspend_delay(&client->dev, 1000);
+	pm_runtime_use_autosuspend(&client->dev);
+
+	ret = pm_runtime_set_active(&client->dev);
+	if (ret)
+		goto error_unreg_buffer;
+	pm_runtime_enable(&client->dev);
+	pm_runtime_idle(&client->dev);
+
+	return 0;
+
+error_unreg_buffer:
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	return ret;
+}
+
+static void lidar_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+
+	pm_runtime_disable(&client->dev);
+	pm_runtime_set_suspended(&client->dev);
+}
+
+static const struct i2c_device_id lidar_id[] = {
+	{"lidar-lite-v2", 0},
+	{"lidar-lite-v3", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, lidar_id);
+
+static const struct of_device_id lidar_dt_ids[] = {
+	{ .compatible = "pulsedlight,lidar-lite-v2" },
+	{ .compatible = "grmn,lidar-lite-v3" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, lidar_dt_ids);
+
+static int lidar_pm_runtime_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct lidar_data *data = iio_priv(indio_dev);
+
+	return lidar_write_power(data, 0x0f);
+}
+
+static int lidar_pm_runtime_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct lidar_data *data = iio_priv(indio_dev);
+	int ret = lidar_write_power(data, 0);
+
+	/* regulator and FPGA needs settling time */
+	usleep_range(15000, 20000);
+
+	return ret;
+}
+
+static const struct dev_pm_ops lidar_pm_ops = {
+	RUNTIME_PM_OPS(lidar_pm_runtime_suspend, lidar_pm_runtime_resume, NULL)
+};
+
+static struct i2c_driver lidar_driver = {
+	.driver = {
+		.name	= LIDAR_DRV_NAME,
+		.of_match_table	= lidar_dt_ids,
+		.pm	= pm_ptr(&lidar_pm_ops),
+	},
+	.probe		= lidar_probe,
+	.remove		= lidar_remove,
+	.id_table	= lidar_id,
+};
+module_i2c_driver(lidar_driver);
+
+MODULE_AUTHOR("Matt Ranostay <matt.ranostay@konsulko.com>");
+MODULE_DESCRIPTION("PulsedLight LIDAR sensor");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/proximity/rfd77402.c b/drivers/iio/proximity/rfd77402.c
new file mode 100644
index 000000000..cb80b3c9d
--- /dev/null
+++ b/drivers/iio/proximity/rfd77402.c
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * rfd77402.c - Support for RF Digital RFD77402 Time-of-Flight (distance) sensor
+ *
+ * Copyright 2017 Peter Meerwald-Stadler <pmeerw@pmeerw.net>
+ *
+ * 7-bit I2C slave address 0x4c
+ *
+ * TODO: interrupt
+ * https://media.digikey.com/pdf/Data%20Sheets/RF%20Digital%20PDFs/RFD77402.pdf
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+
+#include <linux/iio/iio.h>
+
+#define RFD77402_DRV_NAME "rfd77402"
+
+#define RFD77402_ICSR		0x00 /* Interrupt Control Status Register */
+#define RFD77402_ICSR_INT_MODE	BIT(2)
+#define RFD77402_ICSR_INT_POL	BIT(3)
+#define RFD77402_ICSR_RESULT	BIT(4)
+#define RFD77402_ICSR_M2H_MSG	BIT(5)
+#define RFD77402_ICSR_H2M_MSG	BIT(6)
+#define RFD77402_ICSR_RESET	BIT(7)
+
+#define RFD77402_CMD_R		0x04
+#define RFD77402_CMD_SINGLE	0x01
+#define RFD77402_CMD_STANDBY	0x10
+#define RFD77402_CMD_MCPU_OFF	0x11
+#define RFD77402_CMD_MCPU_ON	0x12
+#define RFD77402_CMD_RESET	BIT(6)
+#define RFD77402_CMD_VALID	BIT(7)
+
+#define RFD77402_STATUS_R	0x06
+#define RFD77402_STATUS_PM_MASK	GENMASK(4, 0)
+#define RFD77402_STATUS_STANDBY	0x00
+#define RFD77402_STATUS_MCPU_OFF	0x10
+#define RFD77402_STATUS_MCPU_ON	0x18
+
+#define RFD77402_RESULT_R	0x08
+#define RFD77402_RESULT_DIST_MASK	GENMASK(12, 2)
+#define RFD77402_RESULT_ERR_MASK	GENMASK(14, 13)
+#define RFD77402_RESULT_VALID	BIT(15)
+
+#define RFD77402_PMU_CFG	0x14
+#define RFD77402_PMU_MCPU_INIT	BIT(9)
+
+#define RFD77402_I2C_INIT_CFG	0x1c
+#define RFD77402_I2C_ADDR_INCR	BIT(0)
+#define RFD77402_I2C_DATA_INCR	BIT(2)
+#define RFD77402_I2C_HOST_DEBUG	BIT(5)
+#define RFD77402_I2C_MCPU_DEBUG	BIT(6)
+
+#define RFD77402_CMD_CFGR_A	0x0c
+#define RFD77402_CMD_CFGR_B	0x0e
+#define RFD77402_HFCFG_0	0x20
+#define RFD77402_HFCFG_1	0x22
+#define RFD77402_HFCFG_2	0x24
+#define RFD77402_HFCFG_3	0x26
+
+#define RFD77402_MOD_CHIP_ID	0x28
+
+/* magic configuration values from datasheet */
+static const struct {
+	u8 reg;
+	u16 val;
+} rf77402_tof_config[] = {
+	{RFD77402_CMD_CFGR_A,	0xe100},
+	{RFD77402_CMD_CFGR_B,	0x10ff},
+	{RFD77402_HFCFG_0,	0x07d0},
+	{RFD77402_HFCFG_1,	0x5008},
+	{RFD77402_HFCFG_2,	0xa041},
+	{RFD77402_HFCFG_3,	0x45d4},
+};
+
+struct rfd77402_data {
+	struct i2c_client *client;
+	/* Serialize reads from the sensor */
+	struct mutex lock;
+};
+
+static const struct iio_chan_spec rfd77402_channels[] = {
+	{
+		.type = IIO_DISTANCE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static int rfd77402_set_state(struct i2c_client *client, u8 state, u16 check)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, RFD77402_CMD_R,
+					state | RFD77402_CMD_VALID);
+	if (ret < 0)
+		return ret;
+
+	usleep_range(10000, 20000);
+
+	ret = i2c_smbus_read_word_data(client, RFD77402_STATUS_R);
+	if (ret < 0)
+		return ret;
+	if ((ret & RFD77402_STATUS_PM_MASK) != check)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int rfd77402_measure(struct i2c_client *client)
+{
+	int ret;
+	int tries = 10;
+
+	ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_ON,
+				 RFD77402_STATUS_MCPU_ON);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, RFD77402_CMD_R,
+					RFD77402_CMD_SINGLE |
+					RFD77402_CMD_VALID);
+	if (ret < 0)
+		goto err;
+
+	while (tries-- > 0) {
+		ret = i2c_smbus_read_byte_data(client, RFD77402_ICSR);
+		if (ret < 0)
+			goto err;
+		if (ret & RFD77402_ICSR_RESULT)
+			break;
+		msleep(20);
+	}
+
+	if (tries < 0) {
+		ret = -ETIMEDOUT;
+		goto err;
+	}
+
+	ret = i2c_smbus_read_word_data(client, RFD77402_RESULT_R);
+	if (ret < 0)
+		goto err;
+
+	if ((ret & RFD77402_RESULT_ERR_MASK) ||
+	    !(ret & RFD77402_RESULT_VALID)) {
+		ret = -EIO;
+		goto err;
+	}
+
+	return (ret & RFD77402_RESULT_DIST_MASK) >> 2;
+
+err:
+	rfd77402_set_state(client, RFD77402_CMD_MCPU_OFF,
+			   RFD77402_STATUS_MCPU_OFF);
+	return ret;
+}
+
+static int rfd77402_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     int *val, int *val2, long mask)
+{
+	struct rfd77402_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		mutex_lock(&data->lock);
+		ret = rfd77402_measure(data->client);
+		mutex_unlock(&data->lock);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		/* 1 LSB is 1 mm */
+		*val = 0;
+		*val2 = 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info rfd77402_info = {
+	.read_raw = rfd77402_read_raw,
+};
+
+static int rfd77402_init(struct i2c_client *client)
+{
+	int ret, i;
+
+	ret = rfd77402_set_state(client, RFD77402_CMD_STANDBY,
+				 RFD77402_STATUS_STANDBY);
+	if (ret < 0)
+		return ret;
+
+	/* configure INT pad as push-pull, active low */
+	ret = i2c_smbus_write_byte_data(client, RFD77402_ICSR,
+					RFD77402_ICSR_INT_MODE);
+	if (ret < 0)
+		return ret;
+
+	/* I2C configuration */
+	ret = i2c_smbus_write_word_data(client, RFD77402_I2C_INIT_CFG,
+					RFD77402_I2C_ADDR_INCR |
+					RFD77402_I2C_DATA_INCR |
+					RFD77402_I2C_HOST_DEBUG	|
+					RFD77402_I2C_MCPU_DEBUG);
+	if (ret < 0)
+		return ret;
+
+	/* set initialization */
+	ret = i2c_smbus_write_word_data(client, RFD77402_PMU_CFG, 0x0500);
+	if (ret < 0)
+		return ret;
+
+	ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_OFF,
+				 RFD77402_STATUS_MCPU_OFF);
+	if (ret < 0)
+		return ret;
+
+	/* set initialization */
+	ret = i2c_smbus_write_word_data(client, RFD77402_PMU_CFG, 0x0600);
+	if (ret < 0)
+		return ret;
+
+	ret = rfd77402_set_state(client, RFD77402_CMD_MCPU_ON,
+				 RFD77402_STATUS_MCPU_ON);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(rf77402_tof_config); i++) {
+		ret = i2c_smbus_write_word_data(client,
+						rf77402_tof_config[i].reg,
+						rf77402_tof_config[i].val);
+		if (ret < 0)
+			return ret;
+	}
+
+	ret = rfd77402_set_state(client, RFD77402_CMD_STANDBY,
+				 RFD77402_STATUS_STANDBY);
+
+	return ret;
+}
+
+static int rfd77402_powerdown(struct i2c_client *client)
+{
+	return rfd77402_set_state(client, RFD77402_CMD_STANDBY,
+				  RFD77402_STATUS_STANDBY);
+}
+
+static void rfd77402_disable(void *client)
+{
+	rfd77402_powerdown(client);
+}
+
+static int rfd77402_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	struct rfd77402_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	ret = i2c_smbus_read_word_data(client, RFD77402_MOD_CHIP_ID);
+	if (ret < 0)
+		return ret;
+	if (ret != 0xad01 && ret != 0xad02) /* known chip ids */
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	mutex_init(&data->lock);
+
+	indio_dev->info = &rfd77402_info;
+	indio_dev->channels = rfd77402_channels;
+	indio_dev->num_channels = ARRAY_SIZE(rfd77402_channels);
+	indio_dev->name = RFD77402_DRV_NAME;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	ret = rfd77402_init(client);
+	if (ret < 0)
+		return ret;
+
+	ret = devm_add_action_or_reset(&client->dev, rfd77402_disable, client);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static int rfd77402_suspend(struct device *dev)
+{
+	return rfd77402_powerdown(to_i2c_client(dev));
+}
+
+static int rfd77402_resume(struct device *dev)
+{
+	return rfd77402_init(to_i2c_client(dev));
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(rfd77402_pm_ops, rfd77402_suspend,
+				rfd77402_resume);
+
+static const struct i2c_device_id rfd77402_id[] = {
+	{ "rfd77402", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rfd77402_id);
+
+static struct i2c_driver rfd77402_driver = {
+	.driver = {
+		.name   = RFD77402_DRV_NAME,
+		.pm     = pm_sleep_ptr(&rfd77402_pm_ops),
+	},
+	.probe  = rfd77402_probe,
+	.id_table = rfd77402_id,
+};
+
+module_i2c_driver(rfd77402_driver);
+
+MODULE_AUTHOR("Peter Meerwald-Stadler <pmeerw@pmeerw.net>");
+MODULE_DESCRIPTION("RFD77402 Time-of-Flight sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/proximity/srf04.c b/drivers/iio/proximity/srf04.c
new file mode 100644
index 000000000..faf2f806c
--- /dev/null
+++ b/drivers/iio/proximity/srf04.c
@@ -0,0 +1,407 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * SRF04: ultrasonic sensor for distance measuring by using GPIOs
+ *
+ * Copyright (c) 2017 Andreas Klinger <ak@it-klinger.de>
+ *
+ * For details about the device see:
+ * https://www.robot-electronics.co.uk/htm/srf04tech.htm
+ *
+ * the measurement cycle as timing diagram looks like:
+ *
+ *          +---+
+ * GPIO     |   |
+ * trig:  --+   +------------------------------------------------------
+ *          ^   ^
+ *          |<->|
+ *         udelay(trigger_pulse_us)
+ *
+ * ultra           +-+ +-+ +-+
+ * sonic           | | | | | |
+ * burst: ---------+ +-+ +-+ +-----------------------------------------
+ *                           .
+ * ultra                     .              +-+ +-+ +-+
+ * sonic                     .              | | | | | |
+ * echo:  ----------------------------------+ +-+ +-+ +----------------
+ *                           .                        .
+ *                           +------------------------+
+ * GPIO                      |                        |
+ * echo:  -------------------+                        +---------------
+ *                           ^                        ^
+ *                           interrupt                interrupt
+ *                           (ts_rising)              (ts_falling)
+ *                           |<---------------------->|
+ *                              pulse time measured
+ *                              --> one round trip of ultra sonic waves
+ */
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/pm_runtime.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+
+struct srf04_cfg {
+	unsigned long trigger_pulse_us;
+};
+
+struct srf04_data {
+	struct device		*dev;
+	struct gpio_desc	*gpiod_trig;
+	struct gpio_desc	*gpiod_echo;
+	struct gpio_desc	*gpiod_power;
+	struct mutex		lock;
+	int			irqnr;
+	ktime_t			ts_rising;
+	ktime_t			ts_falling;
+	struct completion	rising;
+	struct completion	falling;
+	const struct srf04_cfg	*cfg;
+	int			startup_time_ms;
+};
+
+static const struct srf04_cfg srf04_cfg = {
+	.trigger_pulse_us = 10,
+};
+
+static const struct srf04_cfg mb_lv_cfg = {
+	.trigger_pulse_us = 20,
+};
+
+static irqreturn_t srf04_handle_irq(int irq, void *dev_id)
+{
+	struct iio_dev *indio_dev = dev_id;
+	struct srf04_data *data = iio_priv(indio_dev);
+	ktime_t now = ktime_get();
+
+	if (gpiod_get_value(data->gpiod_echo)) {
+		data->ts_rising = now;
+		complete(&data->rising);
+	} else {
+		data->ts_falling = now;
+		complete(&data->falling);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int srf04_read(struct srf04_data *data)
+{
+	int ret;
+	ktime_t ktime_dt;
+	u64 dt_ns;
+	u32 time_ns, distance_mm;
+
+	if (data->gpiod_power) {
+		ret = pm_runtime_resume_and_get(data->dev);
+		if (ret < 0)
+			return ret;
+	}
+	/*
+	 * just one read-echo-cycle can take place at a time
+	 * ==> lock against concurrent reading calls
+	 */
+	mutex_lock(&data->lock);
+
+	reinit_completion(&data->rising);
+	reinit_completion(&data->falling);
+
+	gpiod_set_value(data->gpiod_trig, 1);
+	udelay(data->cfg->trigger_pulse_us);
+	gpiod_set_value(data->gpiod_trig, 0);
+
+	if (data->gpiod_power) {
+		pm_runtime_mark_last_busy(data->dev);
+		pm_runtime_put_autosuspend(data->dev);
+	}
+
+	/* it should not take more than 20 ms until echo is rising */
+	ret = wait_for_completion_killable_timeout(&data->rising, HZ/50);
+	if (ret < 0) {
+		mutex_unlock(&data->lock);
+		return ret;
+	} else if (ret == 0) {
+		mutex_unlock(&data->lock);
+		return -ETIMEDOUT;
+	}
+
+	/* it cannot take more than 50 ms until echo is falling */
+	ret = wait_for_completion_killable_timeout(&data->falling, HZ/20);
+	if (ret < 0) {
+		mutex_unlock(&data->lock);
+		return ret;
+	} else if (ret == 0) {
+		mutex_unlock(&data->lock);
+		return -ETIMEDOUT;
+	}
+
+	ktime_dt = ktime_sub(data->ts_falling, data->ts_rising);
+
+	mutex_unlock(&data->lock);
+
+	dt_ns = ktime_to_ns(ktime_dt);
+	/*
+	 * measuring more than 6,45 meters is beyond the capabilities of
+	 * the supported sensors
+	 * ==> filter out invalid results for not measuring echos of
+	 *     another us sensor
+	 *
+	 * formula:
+	 *         distance     6,45 * 2 m
+	 * time = ---------- = ------------ = 40438871 ns
+	 *          speed         319 m/s
+	 *
+	 * using a minimum speed at -20 °C of 319 m/s
+	 */
+	if (dt_ns > 40438871)
+		return -EIO;
+
+	time_ns = dt_ns;
+
+	/*
+	 * the speed as function of the temperature is approximately:
+	 *
+	 * speed = 331,5 + 0,6 * Temp
+	 *   with Temp in °C
+	 *   and speed in m/s
+	 *
+	 * use 343,5 m/s as ultrasonic speed at 20 °C here in absence of the
+	 * temperature
+	 *
+	 * therefore:
+	 *             time     343,5     time * 106
+	 * distance = ------ * ------- = ------------
+	 *             10^6         2         617176
+	 *   with time in ns
+	 *   and distance in mm (one way)
+	 *
+	 * because we limit to 6,45 meters the multiplication with 106 just
+	 * fits into 32 bit
+	 */
+	distance_mm = time_ns * 106 / 617176;
+
+	return distance_mm;
+}
+
+static int srf04_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *channel, int *val,
+			    int *val2, long info)
+{
+	struct srf04_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (channel->type != IIO_DISTANCE)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_CHAN_INFO_RAW:
+		ret = srf04_read(data);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		/*
+		 * theoretical maximum resolution is 3 mm
+		 * 1 LSB is 1 mm
+		 */
+		*val = 0;
+		*val2 = 1000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info srf04_iio_info = {
+	.read_raw		= srf04_read_raw,
+};
+
+static const struct iio_chan_spec srf04_chan_spec[] = {
+	{
+		.type = IIO_DISTANCE,
+		.info_mask_separate =
+				BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static const struct of_device_id of_srf04_match[] = {
+	{ .compatible = "devantech,srf04", .data = &srf04_cfg },
+	{ .compatible = "maxbotix,mb1000", .data = &mb_lv_cfg },
+	{ .compatible = "maxbotix,mb1010", .data = &mb_lv_cfg },
+	{ .compatible = "maxbotix,mb1020", .data = &mb_lv_cfg },
+	{ .compatible = "maxbotix,mb1030", .data = &mb_lv_cfg },
+	{ .compatible = "maxbotix,mb1040", .data = &mb_lv_cfg },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, of_srf04_match);
+
+static int srf04_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct srf04_data *data;
+	struct iio_dev *indio_dev;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(struct srf04_data));
+	if (!indio_dev) {
+		dev_err(dev, "failed to allocate IIO device\n");
+		return -ENOMEM;
+	}
+
+	data = iio_priv(indio_dev);
+	data->dev = dev;
+	data->cfg = device_get_match_data(dev);
+
+	mutex_init(&data->lock);
+	init_completion(&data->rising);
+	init_completion(&data->falling);
+
+	data->gpiod_trig = devm_gpiod_get(dev, "trig", GPIOD_OUT_LOW);
+	if (IS_ERR(data->gpiod_trig)) {
+		dev_err(dev, "failed to get trig-gpios: err=%ld\n",
+					PTR_ERR(data->gpiod_trig));
+		return PTR_ERR(data->gpiod_trig);
+	}
+
+	data->gpiod_echo = devm_gpiod_get(dev, "echo", GPIOD_IN);
+	if (IS_ERR(data->gpiod_echo)) {
+		dev_err(dev, "failed to get echo-gpios: err=%ld\n",
+					PTR_ERR(data->gpiod_echo));
+		return PTR_ERR(data->gpiod_echo);
+	}
+
+	data->gpiod_power = devm_gpiod_get_optional(dev, "power",
+								GPIOD_OUT_LOW);
+	if (IS_ERR(data->gpiod_power)) {
+		dev_err(dev, "failed to get power-gpios: err=%ld\n",
+						PTR_ERR(data->gpiod_power));
+		return PTR_ERR(data->gpiod_power);
+	}
+	if (data->gpiod_power) {
+		data->startup_time_ms = 100;
+		device_property_read_u32(dev, "startup-time-ms", &data->startup_time_ms);
+		dev_dbg(dev, "using power gpio: startup-time-ms=%d\n",
+							data->startup_time_ms);
+	}
+
+	if (gpiod_cansleep(data->gpiod_echo)) {
+		dev_err(data->dev, "cansleep-GPIOs not supported\n");
+		return -ENODEV;
+	}
+
+	data->irqnr = gpiod_to_irq(data->gpiod_echo);
+	if (data->irqnr < 0) {
+		dev_err(data->dev, "gpiod_to_irq: %d\n", data->irqnr);
+		return data->irqnr;
+	}
+
+	ret = devm_request_irq(dev, data->irqnr, srf04_handle_irq,
+			IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			pdev->name, indio_dev);
+	if (ret < 0) {
+		dev_err(data->dev, "request_irq: %d\n", ret);
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	indio_dev->name = "srf04";
+	indio_dev->info = &srf04_iio_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = srf04_chan_spec;
+	indio_dev->num_channels = ARRAY_SIZE(srf04_chan_spec);
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0) {
+		dev_err(data->dev, "iio_device_register: %d\n", ret);
+		return ret;
+	}
+
+	if (data->gpiod_power) {
+		pm_runtime_set_autosuspend_delay(data->dev, 1000);
+		pm_runtime_use_autosuspend(data->dev);
+
+		ret = pm_runtime_set_active(data->dev);
+		if (ret) {
+			dev_err(data->dev, "pm_runtime_set_active: %d\n", ret);
+			iio_device_unregister(indio_dev);
+		}
+
+		pm_runtime_enable(data->dev);
+		pm_runtime_idle(data->dev);
+	}
+
+	return ret;
+}
+
+static int srf04_remove(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct srf04_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+
+	if (data->gpiod_power) {
+		pm_runtime_disable(data->dev);
+		pm_runtime_set_suspended(data->dev);
+	}
+
+	return 0;
+}
+
+static int  srf04_pm_runtime_suspend(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev,
+						struct platform_device, dev);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct srf04_data *data = iio_priv(indio_dev);
+
+	gpiod_set_value(data->gpiod_power, 0);
+
+	return 0;
+}
+
+static int srf04_pm_runtime_resume(struct device *dev)
+{
+	struct platform_device *pdev = container_of(dev,
+						struct platform_device, dev);
+	struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+	struct srf04_data *data = iio_priv(indio_dev);
+
+	gpiod_set_value(data->gpiod_power, 1);
+	msleep(data->startup_time_ms);
+
+	return 0;
+}
+
+static const struct dev_pm_ops srf04_pm_ops = {
+	RUNTIME_PM_OPS(srf04_pm_runtime_suspend,
+		       srf04_pm_runtime_resume, NULL)
+};
+
+static struct platform_driver srf04_driver = {
+	.probe		= srf04_probe,
+	.remove		= srf04_remove,
+	.driver		= {
+		.name		= "srf04-gpio",
+		.of_match_table	= of_srf04_match,
+		.pm		= pm_ptr(&srf04_pm_ops),
+	},
+};
+
+module_platform_driver(srf04_driver);
+
+MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
+MODULE_DESCRIPTION("SRF04 ultrasonic sensor for distance measuring using GPIOs");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:srf04");
diff --git a/drivers/iio/proximity/srf08.c b/drivers/iio/proximity/srf08.c
new file mode 100644
index 000000000..7ed11339c
--- /dev/null
+++ b/drivers/iio/proximity/srf08.c
@@ -0,0 +1,559 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * srf08.c - Support for Devantech SRFxx ultrasonic ranger
+ *           with i2c interface
+ * actually supported are srf02, srf08, srf10
+ *
+ * Copyright (c) 2016, 2017 Andreas Klinger <ak@it-klinger.de>
+ *
+ * For details about the device see:
+ * https://www.robot-electronics.co.uk/htm/srf08tech.html
+ * https://www.robot-electronics.co.uk/htm/srf10tech.htm
+ * https://www.robot-electronics.co.uk/htm/srf02tech.htm
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+/* registers of SRF08 device */
+#define SRF08_WRITE_COMMAND	0x00	/* Command Register */
+#define SRF08_WRITE_MAX_GAIN	0x01	/* Max Gain Register: 0 .. 31 */
+#define SRF08_WRITE_RANGE	0x02	/* Range Register: 0 .. 255 */
+#define SRF08_READ_SW_REVISION	0x00	/* Software Revision */
+#define SRF08_READ_LIGHT	0x01	/* Light Sensor during last echo */
+#define SRF08_READ_ECHO_1_HIGH	0x02	/* Range of first echo received */
+#define SRF08_READ_ECHO_1_LOW	0x03	/* Range of first echo received */
+
+#define SRF08_CMD_RANGING_CM	0x51	/* Ranging Mode - Result in cm */
+
+enum srf08_sensor_type {
+	SRF02,
+	SRF08,
+	SRF10,
+	SRF_MAX_TYPE
+};
+
+struct srf08_chip_info {
+	const int		*sensitivity_avail;
+	int			num_sensitivity_avail;
+	int			sensitivity_default;
+
+	/* default value of Range in mm */
+	int			range_default;
+};
+
+struct srf08_data {
+	struct i2c_client	*client;
+
+	/*
+	 * Gain in the datasheet is called sensitivity here to distinct it
+	 * from the gain used with amplifiers of adc's
+	 */
+	int			sensitivity;
+
+	/* max. Range in mm */
+	int			range_mm;
+	struct mutex		lock;
+
+	/* Ensure timestamp is naturally aligned */
+	struct {
+		s16 chan;
+		s64 timestamp __aligned(8);
+	} scan;
+
+	/* Sensor-Type */
+	enum srf08_sensor_type	sensor_type;
+
+	/* Chip-specific information */
+	const struct srf08_chip_info	*chip_info;
+};
+
+/*
+ * in the documentation one can read about the "Gain" of the device
+ * which is used here for amplifying the signal and filtering out unwanted
+ * ones.
+ * But with ADC's this term is already used differently and that's why it
+ * is called "Sensitivity" here.
+ */
+static const struct srf08_chip_info srf02_chip_info = {
+	.sensitivity_avail	= NULL,
+	.num_sensitivity_avail	= 0,
+	.sensitivity_default	= 0,
+
+	.range_default		= 0,
+};
+
+static const int srf08_sensitivity_avail[] = {
+	 94,  97, 100, 103, 107, 110, 114, 118,
+	123, 128, 133, 139, 145, 152, 159, 168,
+	177, 187, 199, 212, 227, 245, 265, 288,
+	317, 352, 395, 450, 524, 626, 777, 1025
+	};
+
+static const struct srf08_chip_info srf08_chip_info = {
+	.sensitivity_avail	= srf08_sensitivity_avail,
+	.num_sensitivity_avail	= ARRAY_SIZE(srf08_sensitivity_avail),
+	.sensitivity_default	= 1025,
+
+	.range_default		= 6020,
+};
+
+static const int srf10_sensitivity_avail[] = {
+	 40,  40,  50,  60,  70,  80, 100, 120,
+	140, 200, 250, 300, 350, 400, 500, 600,
+	700,
+	};
+
+static const struct srf08_chip_info srf10_chip_info = {
+	.sensitivity_avail	= srf10_sensitivity_avail,
+	.num_sensitivity_avail	= ARRAY_SIZE(srf10_sensitivity_avail),
+	.sensitivity_default	= 700,
+
+	.range_default		= 6020,
+};
+
+static int srf08_read_ranging(struct srf08_data *data)
+{
+	struct i2c_client *client = data->client;
+	int ret, i;
+	int waittime;
+
+	mutex_lock(&data->lock);
+
+	ret = i2c_smbus_write_byte_data(data->client,
+			SRF08_WRITE_COMMAND, SRF08_CMD_RANGING_CM);
+	if (ret < 0) {
+		dev_err(&client->dev, "write command - err: %d\n", ret);
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	/*
+	 * we read here until a correct version number shows up as
+	 * suggested by the documentation
+	 *
+	 * with an ultrasonic speed of 343 m/s and a roundtrip of it
+	 * sleep the expected duration and try to read from the device
+	 * if nothing useful is read try it in a shorter grid
+	 *
+	 * polling for not more than 20 ms should be enough
+	 */
+	waittime = 1 + data->range_mm / 172;
+	msleep(waittime);
+	for (i = 0; i < 4; i++) {
+		ret = i2c_smbus_read_byte_data(data->client,
+						SRF08_READ_SW_REVISION);
+
+		/* check if a valid version number is read */
+		if (ret < 255 && ret > 0)
+			break;
+		msleep(5);
+	}
+
+	if (ret >= 255 || ret <= 0) {
+		dev_err(&client->dev, "device not ready\n");
+		mutex_unlock(&data->lock);
+		return -EIO;
+	}
+
+	ret = i2c_smbus_read_word_swapped(data->client,
+						SRF08_READ_ECHO_1_HIGH);
+	if (ret < 0) {
+		dev_err(&client->dev, "cannot read distance: ret=%d\n", ret);
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	mutex_unlock(&data->lock);
+
+	return ret;
+}
+
+static irqreturn_t srf08_trigger_handler(int irq, void *p)
+{
+	struct iio_poll_func *pf = p;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct srf08_data *data = iio_priv(indio_dev);
+	s16 sensor_data;
+
+	sensor_data = srf08_read_ranging(data);
+	if (sensor_data < 0)
+		goto err;
+
+	mutex_lock(&data->lock);
+
+	data->scan.chan = sensor_data;
+	iio_push_to_buffers_with_timestamp(indio_dev,
+					   &data->scan, pf->timestamp);
+
+	mutex_unlock(&data->lock);
+err:
+	iio_trigger_notify_done(indio_dev->trig);
+	return IRQ_HANDLED;
+}
+
+static int srf08_read_raw(struct iio_dev *indio_dev,
+			    struct iio_chan_spec const *channel, int *val,
+			    int *val2, long mask)
+{
+	struct srf08_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (channel->type != IIO_DISTANCE)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = srf08_read_ranging(data);
+		if (ret < 0)
+			return ret;
+		*val = ret;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		/* 1 LSB is 1 cm */
+		*val = 0;
+		*val2 = 10000;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static ssize_t srf08_show_range_mm_available(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	return sprintf(buf, "[0.043 0.043 11.008]\n");
+}
+
+static IIO_DEVICE_ATTR(sensor_max_range_available, S_IRUGO,
+				srf08_show_range_mm_available, NULL, 0);
+
+static ssize_t srf08_show_range_mm(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct srf08_data *data = iio_priv(indio_dev);
+
+	return sprintf(buf, "%d.%03d\n", data->range_mm / 1000,
+						data->range_mm % 1000);
+}
+
+/*
+ * set the range of the sensor to an even multiple of 43 mm
+ * which corresponds to 1 LSB in the register
+ *
+ * register value    corresponding range
+ *         0x00             43 mm
+ *         0x01             86 mm
+ *         0x02            129 mm
+ *         ...
+ *         0xFF          11008 mm
+ */
+static ssize_t srf08_write_range_mm(struct srf08_data *data, unsigned int val)
+{
+	int ret;
+	struct i2c_client *client = data->client;
+	unsigned int mod;
+	u8 regval;
+
+	ret = val / 43 - 1;
+	mod = val % 43;
+
+	if (mod || (ret < 0) || (ret > 255))
+		return -EINVAL;
+
+	regval = ret;
+
+	mutex_lock(&data->lock);
+
+	ret = i2c_smbus_write_byte_data(client, SRF08_WRITE_RANGE, regval);
+	if (ret < 0) {
+		dev_err(&client->dev, "write_range - err: %d\n", ret);
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	data->range_mm = val;
+
+	mutex_unlock(&data->lock);
+
+	return 0;
+}
+
+static ssize_t srf08_store_range_mm(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct srf08_data *data = iio_priv(indio_dev);
+	int ret;
+	int integer, fract;
+
+	ret = iio_str_to_fixpoint(buf, 100, &integer, &fract);
+	if (ret)
+		return ret;
+
+	ret = srf08_write_range_mm(data, integer * 1000 + fract);
+	if (ret < 0)
+		return ret;
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR(sensor_max_range, S_IRUGO | S_IWUSR,
+			srf08_show_range_mm, srf08_store_range_mm, 0);
+
+static ssize_t srf08_show_sensitivity_available(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	int i, len = 0;
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct srf08_data *data = iio_priv(indio_dev);
+
+	for (i = 0; i < data->chip_info->num_sensitivity_avail; i++)
+		if (data->chip_info->sensitivity_avail[i])
+			len += sprintf(buf + len, "%d ",
+				data->chip_info->sensitivity_avail[i]);
+
+	len += sprintf(buf + len, "\n");
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR(sensor_sensitivity_available, S_IRUGO,
+				srf08_show_sensitivity_available, NULL, 0);
+
+static ssize_t srf08_show_sensitivity(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct srf08_data *data = iio_priv(indio_dev);
+	int len;
+
+	len = sprintf(buf, "%d\n", data->sensitivity);
+
+	return len;
+}
+
+static ssize_t srf08_write_sensitivity(struct srf08_data *data,
+							unsigned int val)
+{
+	struct i2c_client *client = data->client;
+	int ret, i;
+	u8 regval;
+
+	if (!val)
+		return -EINVAL;
+
+	for (i = 0; i < data->chip_info->num_sensitivity_avail; i++)
+		if (val == data->chip_info->sensitivity_avail[i]) {
+			regval = i;
+			break;
+		}
+
+	if (i >= data->chip_info->num_sensitivity_avail)
+		return -EINVAL;
+
+	mutex_lock(&data->lock);
+
+	ret = i2c_smbus_write_byte_data(client, SRF08_WRITE_MAX_GAIN, regval);
+	if (ret < 0) {
+		dev_err(&client->dev, "write_sensitivity - err: %d\n", ret);
+		mutex_unlock(&data->lock);
+		return ret;
+	}
+
+	data->sensitivity = val;
+
+	mutex_unlock(&data->lock);
+
+	return 0;
+}
+
+static ssize_t srf08_store_sensitivity(struct device *dev,
+						struct device_attribute *attr,
+						const char *buf, size_t len)
+{
+	struct iio_dev *indio_dev = dev_to_iio_dev(dev);
+	struct srf08_data *data = iio_priv(indio_dev);
+	int ret;
+	unsigned int val;
+
+	ret = kstrtouint(buf, 10, &val);
+	if (ret)
+		return ret;
+
+	ret = srf08_write_sensitivity(data, val);
+	if (ret < 0)
+		return ret;
+
+	return len;
+}
+
+static IIO_DEVICE_ATTR(sensor_sensitivity, S_IRUGO | S_IWUSR,
+			srf08_show_sensitivity, srf08_store_sensitivity, 0);
+
+static struct attribute *srf08_attributes[] = {
+	&iio_dev_attr_sensor_max_range.dev_attr.attr,
+	&iio_dev_attr_sensor_max_range_available.dev_attr.attr,
+	&iio_dev_attr_sensor_sensitivity.dev_attr.attr,
+	&iio_dev_attr_sensor_sensitivity_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group srf08_attribute_group = {
+	.attrs = srf08_attributes,
+};
+
+static const struct iio_chan_spec srf08_channels[] = {
+	{
+		.type = IIO_DISTANCE,
+		.info_mask_separate =
+				BIT(IIO_CHAN_INFO_RAW) |
+				BIT(IIO_CHAN_INFO_SCALE),
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 16,
+			.storagebits = 16,
+			.endianness = IIO_CPU,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1),
+};
+
+static const struct iio_info srf08_info = {
+	.read_raw = srf08_read_raw,
+	.attrs = &srf08_attribute_group,
+};
+
+/*
+ * srf02 don't have an adjustable range or sensitivity,
+ * so we don't need attributes at all
+ */
+static const struct iio_info srf02_info = {
+	.read_raw = srf08_read_raw,
+};
+
+static int srf08_probe(struct i2c_client *client,
+					 const struct i2c_device_id *id)
+{
+	struct iio_dev *indio_dev;
+	struct srf08_data *data;
+	int ret;
+
+	if (!i2c_check_functionality(client->adapter,
+					I2C_FUNC_SMBUS_READ_BYTE_DATA |
+					I2C_FUNC_SMBUS_WRITE_BYTE_DATA |
+					I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -ENODEV;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->client = client;
+	data->sensor_type = (enum srf08_sensor_type)id->driver_data;
+
+	switch (data->sensor_type) {
+	case SRF02:
+		data->chip_info = &srf02_chip_info;
+		indio_dev->info = &srf02_info;
+		break;
+	case SRF08:
+		data->chip_info = &srf08_chip_info;
+		indio_dev->info = &srf08_info;
+		break;
+	case SRF10:
+		data->chip_info = &srf10_chip_info;
+		indio_dev->info = &srf08_info;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	indio_dev->name = id->name;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	indio_dev->channels = srf08_channels;
+	indio_dev->num_channels = ARRAY_SIZE(srf08_channels);
+
+	mutex_init(&data->lock);
+
+	ret = devm_iio_triggered_buffer_setup(&client->dev, indio_dev,
+			iio_pollfunc_store_time, srf08_trigger_handler, NULL);
+	if (ret < 0) {
+		dev_err(&client->dev, "setup of iio triggered buffer failed\n");
+		return ret;
+	}
+
+	if (data->chip_info->range_default) {
+		/*
+		 * set default range of device in mm here
+		 * these register values cannot be read from the hardware
+		 * therefore set driver specific default values
+		 *
+		 * srf02 don't have a default value so it'll be omitted
+		 */
+		ret = srf08_write_range_mm(data,
+					data->chip_info->range_default);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (data->chip_info->sensitivity_default) {
+		/*
+		 * set default sensitivity of device here
+		 * these register values cannot be read from the hardware
+		 * therefore set driver specific default values
+		 *
+		 * srf02 don't have a default value so it'll be omitted
+		 */
+		ret = srf08_write_sensitivity(data,
+				data->chip_info->sensitivity_default);
+		if (ret < 0)
+			return ret;
+	}
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct of_device_id of_srf08_match[] = {
+	{ .compatible = "devantech,srf02", (void *)SRF02 },
+	{ .compatible = "devantech,srf08", (void *)SRF08 },
+	{ .compatible = "devantech,srf10", (void *)SRF10 },
+	{},
+};
+
+MODULE_DEVICE_TABLE(of, of_srf08_match);
+
+static const struct i2c_device_id srf08_id[] = {
+	{ "srf02", SRF02 },
+	{ "srf08", SRF08 },
+	{ "srf10", SRF10 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, srf08_id);
+
+static struct i2c_driver srf08_driver = {
+	.driver = {
+		.name	= "srf08",
+		.of_match_table	= of_srf08_match,
+	},
+	.probe = srf08_probe,
+	.id_table = srf08_id,
+};
+module_i2c_driver(srf08_driver);
+
+MODULE_AUTHOR("Andreas Klinger <ak@it-klinger.de>");
+MODULE_DESCRIPTION("Devantech SRF02/SRF08/SRF10 i2c ultrasonic ranger driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/proximity/sx9310.c b/drivers/iio/proximity/sx9310.c
new file mode 100644
index 000000000..0e4747ccd
--- /dev/null
+++ b/drivers/iio/proximity/sx9310.c
@@ -0,0 +1,1062 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2018 Google LLC.
+ *
+ * Driver for Semtech's SX9310/SX9311 capacitive proximity/button solution.
+ * Based on SX9500 driver and Semtech driver using the input framework
+ * <https://my.syncplicity.com/share/teouwsim8niiaud/
+ *          linux-driver-SX9310_NoSmartHSensing>.
+ * Reworked in April 2019 by Evan Green <evgreen@chromium.org>
+ * and in January 2020 by Daniel Campello <campello@chromium.org>.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/iio/iio.h>
+
+#include "sx_common.h"
+
+/* Register definitions. */
+#define SX9310_REG_IRQ_SRC				SX_COMMON_REG_IRQ_SRC
+#define SX9310_REG_STAT0				0x01
+#define SX9310_REG_STAT1				0x02
+#define SX9310_REG_STAT1_COMPSTAT_MASK			GENMASK(3, 0)
+#define SX9310_REG_IRQ_MSK				0x03
+#define   SX9310_CONVDONE_IRQ				BIT(3)
+#define   SX9310_FAR_IRQ				BIT(5)
+#define   SX9310_CLOSE_IRQ				BIT(6)
+#define SX9310_REG_IRQ_FUNC				0x04
+
+#define SX9310_REG_PROX_CTRL0				0x10
+#define   SX9310_REG_PROX_CTRL0_SENSOREN_MASK		GENMASK(3, 0)
+#define   SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK		GENMASK(7, 4)
+#define   SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS		0x01
+#define SX9310_REG_PROX_CTRL1				0x11
+#define SX9310_REG_PROX_CTRL2				0x12
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_MASK		GENMASK(7, 6)
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1_CS2_CS3 (0x03 << 6)
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2	(0x02 << 6)
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1	(0x01 << 6)
+#define   SX9310_REG_PROX_CTRL2_COMBMODE_CS3		(0x00 << 6)
+#define   SX9310_REG_PROX_CTRL2_SHIELDEN_MASK		GENMASK(3, 2)
+#define   SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC	(0x01 << 2)
+#define   SX9310_REG_PROX_CTRL2_SHIELDEN_GROUND		(0x02 << 2)
+#define SX9310_REG_PROX_CTRL3				0x13
+#define   SX9310_REG_PROX_CTRL3_GAIN0_MASK		GENMASK(3, 2)
+#define   SX9310_REG_PROX_CTRL3_GAIN0_X8		(0x03 << 2)
+#define   SX9310_REG_PROX_CTRL3_GAIN12_MASK		GENMASK(1, 0)
+#define   SX9310_REG_PROX_CTRL3_GAIN12_X4		0x02
+#define SX9310_REG_PROX_CTRL4				0x14
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_MASK		GENMASK(2, 0)
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST	0x07
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_FINE	0x06
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_FINE		0x05
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM	0x04
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM_COARSE 0x03
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_COARSE	0x02
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_COARSE	0x01
+#define   SX9310_REG_PROX_CTRL4_RESOLUTION_COARSEST	0x00
+#define SX9310_REG_PROX_CTRL5				0x15
+#define   SX9310_REG_PROX_CTRL5_RANGE_SMALL		(0x03 << 6)
+#define   SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK	GENMASK(3, 2)
+#define   SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1		(0x01 << 2)
+#define   SX9310_REG_PROX_CTRL5_RAWFILT_MASK		GENMASK(1, 0)
+#define   SX9310_REG_PROX_CTRL5_RAWFILT_SHIFT		0
+#define   SX9310_REG_PROX_CTRL5_RAWFILT_1P25		0x02
+#define SX9310_REG_PROX_CTRL6				0x16
+#define   SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT	0x20
+#define SX9310_REG_PROX_CTRL7				0x17
+#define   SX9310_REG_PROX_CTRL7_AVGNEGFILT_2		(0x01 << 3)
+#define   SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK		GENMASK(2, 0)
+#define   SX9310_REG_PROX_CTRL7_AVGPOSFILT_SHIFT	0
+#define   SX9310_REG_PROX_CTRL7_AVGPOSFILT_512		0x05
+#define SX9310_REG_PROX_CTRL8				0x18
+#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK		GENMASK(7, 3)
+#define SX9310_REG_PROX_CTRL9				0x19
+#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_28		(0x08 << 3)
+#define   SX9310_REG_PROX_CTRL8_9_PTHRESH_96		(0x11 << 3)
+#define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900	0x03
+#define   SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500	0x05
+#define SX9310_REG_PROX_CTRL10				0x1a
+#define   SX9310_REG_PROX_CTRL10_HYST_MASK		GENMASK(5, 4)
+#define   SX9310_REG_PROX_CTRL10_HYST_6PCT		(0x01 << 4)
+#define   SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK	GENMASK(3, 2)
+#define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK	GENMASK(1, 0)
+#define   SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2		0x01
+#define SX9310_REG_PROX_CTRL11				0x1b
+#define SX9310_REG_PROX_CTRL12				0x1c
+#define SX9310_REG_PROX_CTRL13				0x1d
+#define SX9310_REG_PROX_CTRL14				0x1e
+#define SX9310_REG_PROX_CTRL15				0x1f
+#define SX9310_REG_PROX_CTRL16				0x20
+#define SX9310_REG_PROX_CTRL17				0x21
+#define SX9310_REG_PROX_CTRL18				0x22
+#define SX9310_REG_PROX_CTRL19				0x23
+#define SX9310_REG_SAR_CTRL0				0x2a
+#define   SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES		(0x02 << 5)
+#define   SX9310_REG_SAR_CTRL0_SARHYST_8		(0x02 << 3)
+#define SX9310_REG_SAR_CTRL1				0x2b
+/* Each increment of the slope register is 0.0078125. */
+#define   SX9310_REG_SAR_CTRL1_SLOPE(_hnslope)		(_hnslope / 78125)
+#define SX9310_REG_SAR_CTRL2				0x2c
+#define   SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT	0x3c
+
+#define SX9310_REG_SENSOR_SEL				0x30
+#define SX9310_REG_USE_MSB				0x31
+#define SX9310_REG_USE_LSB				0x32
+#define SX9310_REG_AVG_MSB				0x33
+#define SX9310_REG_AVG_LSB				0x34
+#define SX9310_REG_DIFF_MSB				0x35
+#define SX9310_REG_DIFF_LSB				0x36
+#define SX9310_REG_OFFSET_MSB				0x37
+#define SX9310_REG_OFFSET_LSB				0x38
+#define SX9310_REG_SAR_MSB				0x39
+#define SX9310_REG_SAR_LSB				0x3a
+#define SX9310_REG_I2C_ADDR				0x40
+#define SX9310_REG_PAUSE				0x41
+#define SX9310_REG_WHOAMI				0x42
+#define   SX9310_WHOAMI_VALUE				0x01
+#define   SX9311_WHOAMI_VALUE				0x02
+#define SX9310_REG_RESET				0x7f
+
+
+/* 4 hardware channels, as defined in STAT0: COMB, CS2, CS1 and CS0. */
+#define SX9310_NUM_CHANNELS				4
+static_assert(SX9310_NUM_CHANNELS <= SX_COMMON_MAX_NUM_CHANNELS);
+
+#define SX9310_NAMED_CHANNEL(idx, name)				 \
+{								 \
+	.type = IIO_PROXIMITY,					 \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		 \
+			      BIT(IIO_CHAN_INFO_HARDWAREGAIN),   \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.info_mask_separate_available =				 \
+		BIT(IIO_CHAN_INFO_HARDWAREGAIN),		 \
+	.info_mask_shared_by_all_available =			 \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),			 \
+	.indexed = 1,						 \
+	.channel = idx,						 \
+	.extend_name = name,					 \
+	.address = SX9310_REG_DIFF_MSB,				 \
+	.event_spec = sx_common_events,				 \
+	.num_event_specs = ARRAY_SIZE(sx_common_events),	 \
+	.scan_index = idx,					 \
+	.scan_type = {						 \
+		.sign = 's',					 \
+		.realbits = 12,					 \
+		.storagebits = 16,				 \
+		.endianness = IIO_BE,				 \
+	},							 \
+}
+#define SX9310_CHANNEL(idx) SX9310_NAMED_CHANNEL(idx, NULL)
+
+static const struct iio_chan_spec sx9310_channels[] = {
+	SX9310_CHANNEL(0),			/* CS0 */
+	SX9310_CHANNEL(1),			/* CS1 */
+	SX9310_CHANNEL(2),			/* CS2 */
+	SX9310_NAMED_CHANNEL(3, "comb"),	/* COMB */
+
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+/*
+ * Each entry contains the integer part (val) and the fractional part, in micro
+ * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO.
+ */
+static const struct {
+	int val;
+	int val2;
+} sx9310_samp_freq_table[] = {
+	{ 500, 0 }, /* 0000: Min (no idle time) */
+	{ 66, 666666 }, /* 0001: 15 ms */
+	{ 33, 333333 }, /* 0010: 30 ms (Typ.) */
+	{ 22, 222222 }, /* 0011: 45 ms */
+	{ 16, 666666 }, /* 0100: 60 ms */
+	{ 11, 111111 }, /* 0101: 90 ms */
+	{ 8, 333333 }, /* 0110: 120 ms */
+	{ 5, 0 }, /* 0111: 200 ms */
+	{ 2, 500000 }, /* 1000: 400 ms */
+	{ 1, 666666 }, /* 1001: 600 ms */
+	{ 1, 250000 }, /* 1010: 800 ms */
+	{ 1, 0 }, /* 1011: 1 s */
+	{ 0, 500000 }, /* 1100: 2 s */
+	{ 0, 333333 }, /* 1101: 3 s */
+	{ 0, 250000 }, /* 1110: 4 s */
+	{ 0, 200000 }, /* 1111: 5 s */
+};
+static const unsigned int sx9310_scan_period_table[] = {
+	2,   15,  30,  45,   60,   90,	 120,  200,
+	400, 600, 800, 1000, 2000, 3000, 4000, 5000,
+};
+
+static const struct regmap_range sx9310_writable_reg_ranges[] = {
+	regmap_reg_range(SX9310_REG_IRQ_MSK, SX9310_REG_IRQ_FUNC),
+	regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
+	regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
+	regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SENSOR_SEL),
+	regmap_reg_range(SX9310_REG_OFFSET_MSB, SX9310_REG_OFFSET_LSB),
+	regmap_reg_range(SX9310_REG_PAUSE, SX9310_REG_PAUSE),
+	regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
+};
+
+static const struct regmap_access_table sx9310_writeable_regs = {
+	.yes_ranges = sx9310_writable_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9310_writable_reg_ranges),
+};
+
+static const struct regmap_range sx9310_readable_reg_ranges[] = {
+	regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_IRQ_FUNC),
+	regmap_reg_range(SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL19),
+	regmap_reg_range(SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL2),
+	regmap_reg_range(SX9310_REG_SENSOR_SEL, SX9310_REG_SAR_LSB),
+	regmap_reg_range(SX9310_REG_I2C_ADDR, SX9310_REG_WHOAMI),
+	regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
+};
+
+static const struct regmap_access_table sx9310_readable_regs = {
+	.yes_ranges = sx9310_readable_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9310_readable_reg_ranges),
+};
+
+static const struct regmap_range sx9310_volatile_reg_ranges[] = {
+	regmap_reg_range(SX9310_REG_IRQ_SRC, SX9310_REG_STAT1),
+	regmap_reg_range(SX9310_REG_USE_MSB, SX9310_REG_DIFF_LSB),
+	regmap_reg_range(SX9310_REG_SAR_MSB, SX9310_REG_SAR_LSB),
+	regmap_reg_range(SX9310_REG_RESET, SX9310_REG_RESET),
+};
+
+static const struct regmap_access_table sx9310_volatile_regs = {
+	.yes_ranges = sx9310_volatile_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9310_volatile_reg_ranges),
+};
+
+static const struct regmap_config sx9310_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = SX9310_REG_RESET,
+	.cache_type = REGCACHE_RBTREE,
+
+	.wr_table = &sx9310_writeable_regs,
+	.rd_table = &sx9310_readable_regs,
+	.volatile_table = &sx9310_volatile_regs,
+};
+
+static int sx9310_read_prox_data(struct sx_common_data *data,
+				 const struct iio_chan_spec *chan, __be16 *val)
+{
+	int ret;
+
+	ret = regmap_write(data->regmap, SX9310_REG_SENSOR_SEL, chan->channel);
+	if (ret)
+		return ret;
+
+	return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val));
+}
+
+/*
+ * If we have no interrupt support, we have to wait for a scan period
+ * after enabling a channel to get a result.
+ */
+static int sx9310_wait_for_sample(struct sx_common_data *data)
+{
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &val);
+	if (ret)
+		return ret;
+
+	val = FIELD_GET(SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, val);
+
+	msleep(sx9310_scan_period_table[val]);
+
+	return 0;
+}
+
+static int sx9310_read_gain(struct sx_common_data *data,
+			    const struct iio_chan_spec *chan, int *val)
+{
+	unsigned int regval, gain;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL3, &regval);
+	if (ret)
+		return ret;
+
+	switch (chan->channel) {
+	case 0:
+	case 3:
+		gain = FIELD_GET(SX9310_REG_PROX_CTRL3_GAIN0_MASK, regval);
+		break;
+	case 1:
+	case 2:
+		gain = FIELD_GET(SX9310_REG_PROX_CTRL3_GAIN12_MASK, regval);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	*val = 1 << gain;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9310_read_samp_freq(struct sx_common_data *data, int *val, int *val2)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, regval);
+	*val = sx9310_samp_freq_table[regval].val;
+	*val2 = sx9310_samp_freq_table[regval].val2;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int sx9310_read_raw(struct iio_dev *indio_dev,
+			   const struct iio_chan_spec *chan, int *val,
+			   int *val2, long mask)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = sx_common_read_proximity(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = sx9310_read_gain(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return sx9310_read_samp_freq(data, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const int sx9310_gain_vals[] = { 1, 2, 4, 8 };
+
+static int sx9310_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long mask)
+{
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		*type = IIO_VAL_INT;
+		*length = ARRAY_SIZE(sx9310_gain_vals);
+		*vals = sx9310_gain_vals;
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = ARRAY_SIZE(sx9310_samp_freq_table) * 2;
+		*vals = (int *)sx9310_samp_freq_table;
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const unsigned int sx9310_pthresh_codes[] = {
+	2, 4, 6, 8, 12, 16, 20, 24, 28, 32, 40, 48, 56, 64, 72, 80, 88, 96, 112,
+	128, 144, 160, 192, 224, 256, 320, 384, 512, 640, 768, 1024, 1536
+};
+
+static int sx9310_get_thresh_reg(unsigned int channel)
+{
+	switch (channel) {
+	case 0:
+	case 3:
+		return SX9310_REG_PROX_CTRL8;
+	case 1:
+	case 2:
+		return SX9310_REG_PROX_CTRL9;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9310_read_thresh(struct sx_common_data *data,
+			      const struct iio_chan_spec *chan, int *val)
+{
+	unsigned int reg;
+	unsigned int regval;
+	int ret;
+
+	reg = ret = sx9310_get_thresh_reg(chan->channel);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(data->regmap, reg, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval);
+	if (regval >= ARRAY_SIZE(sx9310_pthresh_codes))
+		return -EINVAL;
+
+	*val = sx9310_pthresh_codes[regval];
+	return IIO_VAL_INT;
+}
+
+static int sx9310_read_hysteresis(struct sx_common_data *data,
+				  const struct iio_chan_spec *chan, int *val)
+{
+	unsigned int regval, pthresh;
+	int ret;
+
+	ret = sx9310_read_thresh(data, chan, &pthresh);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL10, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9310_REG_PROX_CTRL10_HYST_MASK, regval);
+	if (!regval)
+		regval = 5;
+
+	/* regval is at most 5 */
+	*val = pthresh >> (5 - regval);
+
+	return IIO_VAL_INT;
+}
+
+static int sx9310_read_far_debounce(struct sx_common_data *data, int *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL10, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, regval);
+	if (regval)
+		*val = 1 << regval;
+	else
+		*val = 0;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9310_read_close_debounce(struct sx_common_data *data, int *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL10, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, regval);
+	if (regval)
+		*val = 1 << regval;
+	else
+		*val = 0;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9310_read_event_val(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir,
+				 enum iio_event_info info, int *val, int *val2)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		return sx9310_read_thresh(data, chan, val);
+	case IIO_EV_INFO_PERIOD:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			return sx9310_read_far_debounce(data, val);
+		case IIO_EV_DIR_FALLING:
+			return sx9310_read_close_debounce(data, val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_EV_INFO_HYSTERESIS:
+		return sx9310_read_hysteresis(data, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9310_write_thresh(struct sx_common_data *data,
+			       const struct iio_chan_spec *chan, int val)
+{
+	unsigned int reg;
+	unsigned int regval;
+	int ret, i;
+
+	reg = ret = sx9310_get_thresh_reg(chan->channel);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(sx9310_pthresh_codes); i++) {
+		if (sx9310_pthresh_codes[i] == val) {
+			regval = i;
+			break;
+		}
+	}
+
+	if (i == ARRAY_SIZE(sx9310_pthresh_codes))
+		return -EINVAL;
+
+	regval = FIELD_PREP(SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval);
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, reg,
+				 SX9310_REG_PROX_CTRL8_9_PTHRESH_MASK, regval);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9310_write_hysteresis(struct sx_common_data *data,
+				   const struct iio_chan_spec *chan, int _val)
+{
+	unsigned int hyst, val = _val;
+	int ret, pthresh;
+
+	ret = sx9310_read_thresh(data, chan, &pthresh);
+	if (ret < 0)
+		return ret;
+
+	if (val == 0)
+		hyst = 0;
+	else if (val == pthresh >> 2)
+		hyst = 3;
+	else if (val == pthresh >> 3)
+		hyst = 2;
+	else if (val == pthresh >> 4)
+		hyst = 1;
+	else
+		return -EINVAL;
+
+	hyst = FIELD_PREP(SX9310_REG_PROX_CTRL10_HYST_MASK, hyst);
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10,
+				 SX9310_REG_PROX_CTRL10_HYST_MASK, hyst);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9310_write_far_debounce(struct sx_common_data *data, int val)
+{
+	int ret;
+	unsigned int regval;
+
+	if (val > 0)
+		val = ilog2(val);
+	if (!FIELD_FIT(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, val))
+		return -EINVAL;
+
+	regval = FIELD_PREP(SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK, val);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10,
+				 SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_MASK,
+				 regval);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9310_write_close_debounce(struct sx_common_data *data, int val)
+{
+	int ret;
+	unsigned int regval;
+
+	if (val > 0)
+		val = ilog2(val);
+	if (!FIELD_FIT(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, val))
+		return -EINVAL;
+
+	regval = FIELD_PREP(SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK, val);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL10,
+				 SX9310_REG_PROX_CTRL10_CLOSE_DEBOUNCE_MASK,
+				 regval);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9310_write_event_val(struct iio_dev *indio_dev,
+				  const struct iio_chan_spec *chan,
+				  enum iio_event_type type,
+				  enum iio_event_direction dir,
+				  enum iio_event_info info, int val, int val2)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		return sx9310_write_thresh(data, chan, val);
+	case IIO_EV_INFO_PERIOD:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			return sx9310_write_far_debounce(data, val);
+		case IIO_EV_DIR_FALLING:
+			return sx9310_write_close_debounce(data, val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_EV_INFO_HYSTERESIS:
+		return sx9310_write_hysteresis(data, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9310_set_samp_freq(struct sx_common_data *data, int val, int val2)
+{
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(sx9310_samp_freq_table); i++)
+		if (val == sx9310_samp_freq_table[i].val &&
+		    val2 == sx9310_samp_freq_table[i].val2)
+			break;
+
+	if (i == ARRAY_SIZE(sx9310_samp_freq_table))
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+
+	ret = regmap_update_bits(
+		data->regmap, SX9310_REG_PROX_CTRL0,
+		SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK,
+		FIELD_PREP(SX9310_REG_PROX_CTRL0_SCANPERIOD_MASK, i));
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9310_write_gain(struct sx_common_data *data,
+			     const struct iio_chan_spec *chan, int val)
+{
+	unsigned int gain, mask;
+	int ret;
+
+	gain = ilog2(val);
+
+	switch (chan->channel) {
+	case 0:
+	case 3:
+		mask = SX9310_REG_PROX_CTRL3_GAIN0_MASK;
+		gain = FIELD_PREP(SX9310_REG_PROX_CTRL3_GAIN0_MASK, gain);
+		break;
+	case 1:
+	case 2:
+		mask = SX9310_REG_PROX_CTRL3_GAIN12_MASK;
+		gain = FIELD_PREP(SX9310_REG_PROX_CTRL3_GAIN12_MASK, gain);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9310_REG_PROX_CTRL3, mask,
+				 gain);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9310_write_raw(struct iio_dev *indio_dev,
+			    const struct iio_chan_spec *chan, int val, int val2,
+			    long mask)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return sx9310_set_samp_freq(data, val, val2);
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		return sx9310_write_gain(data, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct sx_common_reg_default sx9310_default_regs[] = {
+	{ SX9310_REG_IRQ_MSK, 0x00 },
+	{ SX9310_REG_IRQ_FUNC, 0x00 },
+	/*
+	 * The lower 4 bits should not be set as it enable sensors measurements.
+	 * Turning the detection on before the configuration values are set to
+	 * good values can cause the device to return erroneous readings.
+	 */
+	{ SX9310_REG_PROX_CTRL0, SX9310_REG_PROX_CTRL0_SCANPERIOD_15MS },
+	{ SX9310_REG_PROX_CTRL1, 0x00 },
+	{ SX9310_REG_PROX_CTRL2, SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2 |
+				 SX9310_REG_PROX_CTRL2_SHIELDEN_DYNAMIC },
+	{ SX9310_REG_PROX_CTRL3, SX9310_REG_PROX_CTRL3_GAIN0_X8 |
+				 SX9310_REG_PROX_CTRL3_GAIN12_X4 },
+	{ SX9310_REG_PROX_CTRL4, SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST },
+	{ SX9310_REG_PROX_CTRL5, SX9310_REG_PROX_CTRL5_RANGE_SMALL |
+				 SX9310_REG_PROX_CTRL5_STARTUPSENS_CS1 |
+				 SX9310_REG_PROX_CTRL5_RAWFILT_1P25 },
+	{ SX9310_REG_PROX_CTRL6, SX9310_REG_PROX_CTRL6_AVGTHRESH_DEFAULT },
+	{ SX9310_REG_PROX_CTRL7, SX9310_REG_PROX_CTRL7_AVGNEGFILT_2 |
+				 SX9310_REG_PROX_CTRL7_AVGPOSFILT_512 },
+	{ SX9310_REG_PROX_CTRL8, SX9310_REG_PROX_CTRL8_9_PTHRESH_96 |
+				 SX9310_REG_PROX_CTRL8_9_BODYTHRESH_1500 },
+	{ SX9310_REG_PROX_CTRL9, SX9310_REG_PROX_CTRL8_9_PTHRESH_28 |
+				 SX9310_REG_PROX_CTRL8_9_BODYTHRESH_900 },
+	{ SX9310_REG_PROX_CTRL10, SX9310_REG_PROX_CTRL10_HYST_6PCT |
+				  SX9310_REG_PROX_CTRL10_FAR_DEBOUNCE_2 },
+	{ SX9310_REG_PROX_CTRL11, 0x00 },
+	{ SX9310_REG_PROX_CTRL12, 0x00 },
+	{ SX9310_REG_PROX_CTRL13, 0x00 },
+	{ SX9310_REG_PROX_CTRL14, 0x00 },
+	{ SX9310_REG_PROX_CTRL15, 0x00 },
+	{ SX9310_REG_PROX_CTRL16, 0x00 },
+	{ SX9310_REG_PROX_CTRL17, 0x00 },
+	{ SX9310_REG_PROX_CTRL18, 0x00 },
+	{ SX9310_REG_PROX_CTRL19, 0x00 },
+	{ SX9310_REG_SAR_CTRL0, SX9310_REG_SAR_CTRL0_SARDEB_4_SAMPLES |
+				SX9310_REG_SAR_CTRL0_SARHYST_8 },
+	{ SX9310_REG_SAR_CTRL1, SX9310_REG_SAR_CTRL1_SLOPE(10781250) },
+	{ SX9310_REG_SAR_CTRL2, SX9310_REG_SAR_CTRL2_SAROFFSET_DEFAULT },
+};
+
+/* Activate all channels and perform an initial compensation. */
+static int sx9310_init_compensation(struct iio_dev *indio_dev)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	int ret;
+	unsigned int val;
+	unsigned int ctrl0;
+
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0, &ctrl0);
+	if (ret)
+		return ret;
+
+	/* run the compensation phase on all channels */
+	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
+			   ctrl0 | SX9310_REG_PROX_CTRL0_SENSOREN_MASK);
+	if (ret)
+		return ret;
+
+	ret = regmap_read_poll_timeout(data->regmap, SX9310_REG_STAT1, val,
+				       !(val & SX9310_REG_STAT1_COMPSTAT_MASK),
+				       20000, 2000000);
+	if (ret)
+		return ret;
+
+	regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
+	return ret;
+}
+
+static const struct sx_common_reg_default *
+sx9310_get_default_reg(struct device *dev, int idx,
+		       struct sx_common_reg_default *reg_def)
+{
+	u32 combined[SX9310_NUM_CHANNELS];
+	u32 start = 0, raw = 0, pos = 0;
+	unsigned long comb_mask = 0;
+	int ret, i, count;
+	const char *res;
+
+	memcpy(reg_def, &sx9310_default_regs[idx], sizeof(*reg_def));
+	switch (reg_def->reg) {
+	case SX9310_REG_PROX_CTRL2:
+		if (device_property_read_bool(dev, "semtech,cs0-ground")) {
+			reg_def->def &= ~SX9310_REG_PROX_CTRL2_SHIELDEN_MASK;
+			reg_def->def |= SX9310_REG_PROX_CTRL2_SHIELDEN_GROUND;
+		}
+
+		count = device_property_count_u32(dev, "semtech,combined-sensors");
+		if (count < 0 || count > ARRAY_SIZE(combined))
+			break;
+		ret = device_property_read_u32_array(dev, "semtech,combined-sensors",
+				combined, count);
+		if (ret)
+			break;
+
+		for (i = 0; i < count; i++)
+			comb_mask |= BIT(combined[i]);
+
+		reg_def->def &= ~SX9310_REG_PROX_CTRL2_COMBMODE_MASK;
+		if (comb_mask == (BIT(3) | BIT(2) | BIT(1) | BIT(0)))
+			reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1_CS2_CS3;
+		else if (comb_mask == (BIT(1) | BIT(2)))
+			reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS1_CS2;
+		else if (comb_mask == (BIT(0) | BIT(1)))
+			reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS0_CS1;
+		else if (comb_mask == BIT(3))
+			reg_def->def |= SX9310_REG_PROX_CTRL2_COMBMODE_CS3;
+
+		break;
+	case SX9310_REG_PROX_CTRL4:
+		ret = device_property_read_string(dev, "semtech,resolution", &res);
+		if (ret)
+			break;
+
+		reg_def->def &= ~SX9310_REG_PROX_CTRL4_RESOLUTION_MASK;
+		if (!strcmp(res, "coarsest"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_COARSEST;
+		else if (!strcmp(res, "very-coarse"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_COARSE;
+		else if (!strcmp(res, "coarse"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_COARSE;
+		else if (!strcmp(res, "medium-coarse"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM_COARSE;
+		else if (!strcmp(res, "medium"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_MEDIUM;
+		else if (!strcmp(res, "fine"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_FINE;
+		else if (!strcmp(res, "very-fine"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_VERY_FINE;
+		else if (!strcmp(res, "finest"))
+			reg_def->def |= SX9310_REG_PROX_CTRL4_RESOLUTION_FINEST;
+
+		break;
+	case SX9310_REG_PROX_CTRL5:
+		ret = device_property_read_u32(dev, "semtech,startup-sensor", &start);
+		if (ret) {
+			start = FIELD_GET(SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK,
+					  reg_def->def);
+		}
+
+		reg_def->def &= ~SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK;
+		reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL5_STARTUPSENS_MASK,
+					   start);
+
+		ret = device_property_read_u32(dev, "semtech,proxraw-strength", &raw);
+		if (ret) {
+			raw = FIELD_GET(SX9310_REG_PROX_CTRL5_RAWFILT_MASK,
+					reg_def->def);
+		} else {
+			raw = ilog2(raw);
+		}
+
+		reg_def->def &= ~SX9310_REG_PROX_CTRL5_RAWFILT_MASK;
+		reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL5_RAWFILT_MASK,
+					   raw);
+		break;
+	case SX9310_REG_PROX_CTRL7:
+		ret = device_property_read_u32(dev, "semtech,avg-pos-strength", &pos);
+		if (ret)
+			break;
+
+		/* Powers of 2, except for a gap between 16 and 64 */
+		pos = clamp(ilog2(pos), 3, 11) - (pos >= 32 ? 4 : 3);
+		reg_def->def &= ~SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK;
+		reg_def->def |= FIELD_PREP(SX9310_REG_PROX_CTRL7_AVGPOSFILT_MASK,
+					   pos);
+		break;
+	}
+
+	return reg_def;
+}
+
+static int sx9310_check_whoami(struct device *dev,
+			       struct iio_dev *indio_dev)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	unsigned int long ddata;
+	unsigned int whoami;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9310_REG_WHOAMI, &whoami);
+	if (ret)
+		return ret;
+
+	ddata = (uintptr_t)device_get_match_data(dev);
+	if (ddata != whoami)
+		return -EINVAL;
+
+	switch (whoami) {
+	case SX9310_WHOAMI_VALUE:
+		indio_dev->name = "sx9310";
+		break;
+	case SX9311_WHOAMI_VALUE:
+		indio_dev->name = "sx9311";
+		break;
+	default:
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static const struct sx_common_chip_info sx9310_chip_info = {
+	.reg_stat = SX9310_REG_STAT0,
+	.reg_irq_msk = SX9310_REG_IRQ_MSK,
+	.reg_enable_chan = SX9310_REG_PROX_CTRL0,
+	.reg_reset = SX9310_REG_RESET,
+
+	.mask_enable_chan = SX9310_REG_STAT1_COMPSTAT_MASK,
+	.irq_msk_offset = 3,
+	.num_channels = SX9310_NUM_CHANNELS,
+	.num_default_regs = ARRAY_SIZE(sx9310_default_regs),
+
+	.ops = {
+		.read_prox_data = sx9310_read_prox_data,
+		.check_whoami = sx9310_check_whoami,
+		.init_compensation = sx9310_init_compensation,
+		.wait_for_sample = sx9310_wait_for_sample,
+		.get_default_reg = sx9310_get_default_reg,
+	},
+
+	.iio_channels = sx9310_channels,
+	.num_iio_channels = ARRAY_SIZE(sx9310_channels),
+	.iio_info =  {
+		.read_raw = sx9310_read_raw,
+		.read_avail = sx9310_read_avail,
+		.read_event_value = sx9310_read_event_val,
+		.write_event_value = sx9310_write_event_val,
+		.write_raw = sx9310_write_raw,
+		.read_event_config = sx_common_read_event_config,
+		.write_event_config = sx_common_write_event_config,
+	},
+};
+
+static int sx9310_probe(struct i2c_client *client)
+{
+	return sx_common_probe(client, &sx9310_chip_info, &sx9310_regmap_config);
+}
+
+static int sx9310_suspend(struct device *dev)
+{
+	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
+	u8 ctrl0;
+	int ret;
+
+	disable_irq_nosync(data->client->irq);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_read(data->regmap, SX9310_REG_PROX_CTRL0,
+			  &data->suspend_ctrl);
+	if (ret)
+		goto out;
+
+	ctrl0 = data->suspend_ctrl & ~SX9310_REG_PROX_CTRL0_SENSOREN_MASK;
+	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0, ctrl0);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 0);
+
+out:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static int sx9310_resume(struct device *dev)
+{
+	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_write(data->regmap, SX9310_REG_PAUSE, 1);
+	if (ret)
+		goto out;
+
+	ret = regmap_write(data->regmap, SX9310_REG_PROX_CTRL0,
+			   data->suspend_ctrl);
+
+out:
+	mutex_unlock(&data->mutex);
+	if (ret)
+		return ret;
+
+	enable_irq(data->client->irq);
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(sx9310_pm_ops, sx9310_suspend, sx9310_resume);
+
+static const struct acpi_device_id sx9310_acpi_match[] = {
+	{ "STH9310", SX9310_WHOAMI_VALUE },
+	{ "STH9311", SX9311_WHOAMI_VALUE },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, sx9310_acpi_match);
+
+static const struct of_device_id sx9310_of_match[] = {
+	{ .compatible = "semtech,sx9310", (void *)SX9310_WHOAMI_VALUE },
+	{ .compatible = "semtech,sx9311", (void *)SX9311_WHOAMI_VALUE },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sx9310_of_match);
+
+static const struct i2c_device_id sx9310_id[] = {
+	{ "sx9310", SX9310_WHOAMI_VALUE },
+	{ "sx9311", SX9311_WHOAMI_VALUE },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, sx9310_id);
+
+static struct i2c_driver sx9310_driver = {
+	.driver = {
+		.name	= "sx9310",
+		.acpi_match_table = sx9310_acpi_match,
+		.of_match_table = sx9310_of_match,
+		.pm = pm_sleep_ptr(&sx9310_pm_ops),
+
+		/*
+		 * Lots of i2c transfers in probe + over 200 ms waiting in
+		 * sx9310_init_compensation() mean a slow probe; prefer async
+		 * so we don't delay boot if we're builtin to the kernel.
+		 */
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.probe_new	= sx9310_probe,
+	.id_table	= sx9310_id,
+};
+module_i2c_driver(sx9310_driver);
+
+MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>");
+MODULE_AUTHOR("Daniel Campello <campello@chromium.org>");
+MODULE_DESCRIPTION("Driver for Semtech SX9310/SX9311 proximity sensor");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(SEMTECH_PROX);
diff --git a/drivers/iio/proximity/sx9324.c b/drivers/iio/proximity/sx9324.c
new file mode 100644
index 000000000..977cf17ce
--- /dev/null
+++ b/drivers/iio/proximity/sx9324.c
@@ -0,0 +1,1159 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Google LLC.
+ *
+ * Driver for Semtech's SX9324 capacitive proximity/button solution.
+ * Based on SX9324 driver and copy of datasheet at:
+ * https://edit.wpgdadawant.com/uploads/news_file/program/2019/30184/tech_files/program_30184_suggest_other_file.pdf
+ */
+
+#include <linux/acpi.h>
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+
+#include "sx_common.h"
+
+/* Register definitions. */
+#define SX9324_REG_IRQ_SRC		SX_COMMON_REG_IRQ_SRC
+#define SX9324_REG_STAT0		0x01
+#define SX9324_REG_STAT1		0x02
+#define SX9324_REG_STAT2		0x03
+#define SX9324_REG_STAT2_COMPSTAT_MASK	GENMASK(3, 0)
+#define SX9324_REG_STAT3		0x04
+#define SX9324_REG_IRQ_MSK		0x05
+#define SX9324_CONVDONE_IRQ		BIT(3)
+#define SX9324_FAR_IRQ			BIT(5)
+#define SX9324_CLOSE_IRQ		BIT(6)
+#define SX9324_REG_IRQ_CFG0		0x06
+#define SX9324_REG_IRQ_CFG1		0x07
+#define SX9324_REG_IRQ_CFG1_FAILCOND    0x80
+#define SX9324_REG_IRQ_CFG2		0x08
+
+#define SX9324_REG_GNRL_CTRL0		0x10
+#define SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK GENMASK(4, 0)
+#define SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS 0x16
+#define SX9324_REG_GNRL_CTRL1		0x11
+#define SX9324_REG_GNRL_CTRL1_PHEN_MASK GENMASK(3, 0)
+#define SX9324_REG_GNRL_CTRL1_PAUSECTRL 0x20
+
+#define SX9324_REG_I2C_ADDR		0x14
+#define SX9324_REG_CLK_SPRD		0x15
+
+#define SX9324_REG_AFE_CTRL0		0x20
+#define SX9324_REG_AFE_CTRL0_RINT_SHIFT		6
+#define SX9324_REG_AFE_CTRL0_RINT_MASK \
+	GENMASK(SX9324_REG_AFE_CTRL0_RINT_SHIFT + 1, \
+		SX9324_REG_AFE_CTRL0_RINT_SHIFT)
+#define SX9324_REG_AFE_CTRL0_RINT_LOWEST	0x00
+#define SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT	4
+#define SX9324_REG_AFE_CTRL0_CSIDLE_MASK \
+	GENMASK(SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT + 1, \
+		SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT)
+#define SX9324_REG_AFE_CTRL0_RINT_LOWEST	0x00
+#define SX9324_REG_AFE_CTRL1		0x21
+#define SX9324_REG_AFE_CTRL2		0x22
+#define SX9324_REG_AFE_CTRL3		0x23
+#define SX9324_REG_AFE_CTRL4		0x24
+#define SX9324_REG_AFE_CTRL4_FREQ_83_33HZ 0x40
+#define SX9324_REG_AFE_CTRL4_RESOLUTION_MASK GENMASK(2, 0)
+#define SX9324_REG_AFE_CTRL4_RES_100	0x04
+#define SX9324_REG_AFE_CTRL5		0x25
+#define SX9324_REG_AFE_CTRL6		0x26
+#define SX9324_REG_AFE_CTRL7		0x27
+#define SX9324_REG_AFE_PH0		0x28
+#define SX9324_REG_AFE_PH0_PIN_MASK(_pin) \
+	GENMASK(2 * (_pin) + 1, 2 * (_pin))
+
+#define SX9324_REG_AFE_PH1		0x29
+#define SX9324_REG_AFE_PH2		0x2a
+#define SX9324_REG_AFE_PH3		0x2b
+#define SX9324_REG_AFE_CTRL8		0x2c
+#define SX9324_REG_AFE_CTRL8_RESERVED	0x10
+#define SX9324_REG_AFE_CTRL8_RESFILTIN_4KOHM 0x02
+#define SX9324_REG_AFE_CTRL8_RESFILTIN_MASK GENMASK(3, 0)
+#define SX9324_REG_AFE_CTRL9		0x2d
+#define SX9324_REG_AFE_CTRL9_AGAIN_MASK			GENMASK(3, 0)
+#define SX9324_REG_AFE_CTRL9_AGAIN_1	0x08
+
+#define SX9324_REG_PROX_CTRL0		0x30
+#define SX9324_REG_PROX_CTRL0_GAIN_MASK	GENMASK(5, 3)
+#define SX9324_REG_PROX_CTRL0_GAIN_SHIFT	3
+#define SX9324_REG_PROX_CTRL0_GAIN_RSVD		0x0
+#define SX9324_REG_PROX_CTRL0_GAIN_1		0x1
+#define SX9324_REG_PROX_CTRL0_GAIN_8		0x4
+#define SX9324_REG_PROX_CTRL0_RAWFILT_MASK	GENMASK(2, 0)
+#define SX9324_REG_PROX_CTRL0_RAWFILT_1P50	0x01
+#define SX9324_REG_PROX_CTRL1		0x31
+#define SX9324_REG_PROX_CTRL2		0x32
+#define SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K 0x20
+#define SX9324_REG_PROX_CTRL3		0x33
+#define SX9324_REG_PROX_CTRL3_AVGDEB_2SAMPLES	0x40
+#define SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K 0x20
+#define SX9324_REG_PROX_CTRL4		0x34
+#define SX9324_REG_PROX_CTRL4_AVGNEGFILT_MASK	GENMASK(5, 3)
+#define SX9324_REG_PROX_CTRL4_AVGNEG_FILT_2 0x08
+#define SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK	GENMASK(2, 0)
+#define SX9324_REG_PROX_CTRL4_AVGPOS_FILT_256 0x04
+#define SX9324_REG_PROX_CTRL5		0x35
+#define SX9324_REG_PROX_CTRL5_HYST_MASK			GENMASK(5, 4)
+#define SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK	GENMASK(3, 2)
+#define SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK		GENMASK(1, 0)
+#define SX9324_REG_PROX_CTRL6		0x36
+#define SX9324_REG_PROX_CTRL6_PROXTHRESH_32	0x08
+#define SX9324_REG_PROX_CTRL7		0x37
+
+#define SX9324_REG_ADV_CTRL0		0x40
+#define SX9324_REG_ADV_CTRL1		0x41
+#define SX9324_REG_ADV_CTRL2		0x42
+#define SX9324_REG_ADV_CTRL3		0x43
+#define SX9324_REG_ADV_CTRL4		0x44
+#define SX9324_REG_ADV_CTRL5		0x45
+#define SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK GENMASK(3, 2)
+#define SX9324_REG_ADV_CTRL5_STARTUP_SENSOR_1	0x04
+#define SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1	0x01
+#define SX9324_REG_ADV_CTRL6		0x46
+#define SX9324_REG_ADV_CTRL7		0x47
+#define SX9324_REG_ADV_CTRL8		0x48
+#define SX9324_REG_ADV_CTRL9		0x49
+#define SX9324_REG_ADV_CTRL10		0x4a
+#define SX9324_REG_ADV_CTRL11		0x4b
+#define SX9324_REG_ADV_CTRL12		0x4c
+#define SX9324_REG_ADV_CTRL13		0x4d
+#define SX9324_REG_ADV_CTRL14		0x4e
+#define SX9324_REG_ADV_CTRL15		0x4f
+#define SX9324_REG_ADV_CTRL16		0x50
+#define SX9324_REG_ADV_CTRL17		0x51
+#define SX9324_REG_ADV_CTRL18		0x52
+#define SX9324_REG_ADV_CTRL19		0x53
+#define SX9324_REG_ADV_CTRL20		0x54
+#define SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION 0xf0
+
+#define SX9324_REG_PHASE_SEL		0x60
+
+#define SX9324_REG_USEFUL_MSB		0x61
+#define SX9324_REG_USEFUL_LSB		0x62
+
+#define SX9324_REG_AVG_MSB		0x63
+#define SX9324_REG_AVG_LSB		0x64
+
+#define SX9324_REG_DIFF_MSB		0x65
+#define SX9324_REG_DIFF_LSB		0x66
+
+#define SX9324_REG_OFFSET_MSB		0x67
+#define SX9324_REG_OFFSET_LSB		0x68
+
+#define SX9324_REG_SAR_MSB		0x69
+#define SX9324_REG_SAR_LSB		0x6a
+
+#define SX9324_REG_RESET		0x9f
+/* Write this to REG_RESET to do a soft reset. */
+#define SX9324_SOFT_RESET		0xde
+
+#define SX9324_REG_WHOAMI		0xfa
+#define   SX9324_WHOAMI_VALUE		0x23
+
+#define SX9324_REG_REVISION		0xfe
+
+/* 4 channels, as defined in STAT0: PH0, PH1, PH2 and PH3. */
+#define SX9324_NUM_CHANNELS		4
+/* 3 CS pins: CS0, CS1, CS2. */
+#define SX9324_NUM_PINS			3
+
+static const char * const sx9324_cs_pin_usage[] = { "HZ", "MI", "DS", "GD" };
+
+static ssize_t sx9324_phase_configuration_show(struct iio_dev *indio_dev,
+					       uintptr_t private,
+					       const struct iio_chan_spec *chan,
+					       char *buf)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	unsigned int val;
+	int i, ret, pin_idx;
+	size_t len = 0;
+
+	ret = regmap_read(data->regmap, SX9324_REG_AFE_PH0 + chan->channel, &val);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < SX9324_NUM_PINS; i++) {
+		pin_idx = (val & SX9324_REG_AFE_PH0_PIN_MASK(i)) >> (2 * i);
+		len += sysfs_emit_at(buf, len, "%s,",
+				     sx9324_cs_pin_usage[pin_idx]);
+	}
+	buf[len - 1] = '\n';
+	return len;
+}
+
+static const struct iio_chan_spec_ext_info sx9324_channel_ext_info[] = {
+	{
+		.name = "setup",
+		.shared = IIO_SEPARATE,
+		.read = sx9324_phase_configuration_show,
+	},
+	{}
+};
+
+#define SX9324_CHANNEL(idx)					 \
+{								 \
+	.type = IIO_PROXIMITY,					 \
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |		 \
+			      BIT(IIO_CHAN_INFO_HARDWAREGAIN),	 \
+	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+	.info_mask_separate_available =				 \
+		BIT(IIO_CHAN_INFO_HARDWAREGAIN),		 \
+	.info_mask_shared_by_all_available =			 \
+		BIT(IIO_CHAN_INFO_SAMP_FREQ),			 \
+	.indexed = 1,						 \
+	.channel = idx,						 \
+	.address = SX9324_REG_DIFF_MSB,				 \
+	.event_spec = sx_common_events,				 \
+	.num_event_specs = ARRAY_SIZE(sx_common_events),	 \
+	.scan_index = idx,					 \
+	.scan_type = {						 \
+		.sign = 's',					 \
+		.realbits = 12,					 \
+		.storagebits = 16,				 \
+		.endianness = IIO_BE,				 \
+	},							 \
+	.ext_info = sx9324_channel_ext_info,			 \
+}
+
+static const struct iio_chan_spec sx9324_channels[] = {
+	SX9324_CHANNEL(0),			/* Phase 0 */
+	SX9324_CHANNEL(1),			/* Phase 1 */
+	SX9324_CHANNEL(2),			/* Phase 2 */
+	SX9324_CHANNEL(3),			/* Phase 3 */
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+/*
+ * Each entry contains the integer part (val) and the fractional part, in micro
+ * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO.
+ */
+static const struct {
+	int val;
+	int val2;
+} sx9324_samp_freq_table[] = {
+	{ 1000, 0 },  /* 00000: Min (no idle time) */
+	{ 500, 0 },  /* 00001: 2 ms */
+	{ 250, 0 },  /* 00010: 4 ms */
+	{ 166, 666666 },  /* 00011: 6 ms */
+	{ 125, 0 },  /* 00100: 8 ms */
+	{ 100, 0 },  /* 00101: 10 ms */
+	{ 71, 428571 },  /* 00110: 14 ms */
+	{ 55, 555556 },  /* 00111: 18 ms */
+	{ 45, 454545 },  /* 01000: 22 ms */
+	{ 38, 461538 },  /* 01001: 26 ms */
+	{ 33, 333333 },  /* 01010: 30 ms */
+	{ 29, 411765 },  /* 01011: 34 ms */
+	{ 26, 315789 },  /* 01100: 38 ms */
+	{ 23, 809524 },  /* 01101: 42 ms */
+	{ 21, 739130 },  /* 01110: 46 ms */
+	{ 20, 0 },  /* 01111: 50 ms */
+	{ 17, 857143 },  /* 10000: 56 ms */
+	{ 16, 129032 },  /* 10001: 62 ms */
+	{ 14, 705882 },  /* 10010: 68 ms */
+	{ 13, 513514 },  /* 10011: 74 ms */
+	{ 12, 500000 },  /* 10100: 80 ms */
+	{ 11, 111111 },  /* 10101: 90 ms */
+	{ 10, 0 },  /* 10110: 100 ms (Typ.) */
+	{ 5, 0 },  /* 10111: 200 ms */
+	{ 3, 333333 },  /* 11000: 300 ms */
+	{ 2, 500000 },  /* 11001: 400 ms */
+	{ 1, 666667 },  /* 11010: 600 ms */
+	{ 1, 250000 },  /* 11011: 800 ms */
+	{ 1, 0 },  /* 11100: 1 s */
+	{ 0, 500000 },  /* 11101: 2 s */
+	{ 0, 333333 },  /* 11110: 3 s */
+	{ 0, 250000 },  /* 11111: 4 s */
+};
+
+static const unsigned int sx9324_scan_period_table[] = {
+	2,   15,  30,  45,   60,   90,	 120,  200,
+	400, 600, 800, 1000, 2000, 3000, 4000, 5000,
+};
+
+static const struct regmap_range sx9324_writable_reg_ranges[] = {
+	/*
+	 * To set COMPSTAT for compensation, even if datasheet says register is
+	 * RO.
+	 */
+	regmap_reg_range(SX9324_REG_STAT2, SX9324_REG_STAT2),
+	regmap_reg_range(SX9324_REG_IRQ_MSK, SX9324_REG_IRQ_CFG2),
+	regmap_reg_range(SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL1),
+	/* Leave i2c and clock spreading as unavailable */
+	regmap_reg_range(SX9324_REG_AFE_CTRL0, SX9324_REG_AFE_CTRL9),
+	regmap_reg_range(SX9324_REG_PROX_CTRL0, SX9324_REG_PROX_CTRL7),
+	regmap_reg_range(SX9324_REG_ADV_CTRL0, SX9324_REG_ADV_CTRL20),
+	regmap_reg_range(SX9324_REG_PHASE_SEL, SX9324_REG_PHASE_SEL),
+	regmap_reg_range(SX9324_REG_OFFSET_MSB, SX9324_REG_OFFSET_LSB),
+	regmap_reg_range(SX9324_REG_RESET, SX9324_REG_RESET),
+};
+
+static const struct regmap_access_table sx9324_writeable_regs = {
+	.yes_ranges = sx9324_writable_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9324_writable_reg_ranges),
+};
+
+/*
+ * All allocated registers are readable, so we just list unallocated
+ * ones.
+ */
+static const struct regmap_range sx9324_non_readable_reg_ranges[] = {
+	regmap_reg_range(SX9324_REG_IRQ_CFG2 + 1, SX9324_REG_GNRL_CTRL0 - 1),
+	regmap_reg_range(SX9324_REG_GNRL_CTRL1 + 1, SX9324_REG_AFE_CTRL0 - 1),
+	regmap_reg_range(SX9324_REG_AFE_CTRL9 + 1, SX9324_REG_PROX_CTRL0 - 1),
+	regmap_reg_range(SX9324_REG_PROX_CTRL7 + 1, SX9324_REG_ADV_CTRL0 - 1),
+	regmap_reg_range(SX9324_REG_ADV_CTRL20 + 1, SX9324_REG_PHASE_SEL - 1),
+	regmap_reg_range(SX9324_REG_SAR_LSB + 1, SX9324_REG_RESET - 1),
+	regmap_reg_range(SX9324_REG_RESET + 1, SX9324_REG_WHOAMI - 1),
+	regmap_reg_range(SX9324_REG_WHOAMI + 1, SX9324_REG_REVISION - 1),
+};
+
+static const struct regmap_access_table sx9324_readable_regs = {
+	.no_ranges = sx9324_non_readable_reg_ranges,
+	.n_no_ranges = ARRAY_SIZE(sx9324_non_readable_reg_ranges),
+};
+
+static const struct regmap_range sx9324_volatile_reg_ranges[] = {
+	regmap_reg_range(SX9324_REG_IRQ_SRC, SX9324_REG_STAT3),
+	regmap_reg_range(SX9324_REG_USEFUL_MSB, SX9324_REG_DIFF_LSB),
+	regmap_reg_range(SX9324_REG_SAR_MSB, SX9324_REG_SAR_LSB),
+	regmap_reg_range(SX9324_REG_WHOAMI, SX9324_REG_WHOAMI),
+	regmap_reg_range(SX9324_REG_REVISION, SX9324_REG_REVISION),
+};
+
+static const struct regmap_access_table sx9324_volatile_regs = {
+	.yes_ranges = sx9324_volatile_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9324_volatile_reg_ranges),
+};
+
+static const struct regmap_config sx9324_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = SX9324_REG_REVISION,
+	.cache_type = REGCACHE_RBTREE,
+
+	.wr_table = &sx9324_writeable_regs,
+	.rd_table = &sx9324_readable_regs,
+	.volatile_table = &sx9324_volatile_regs,
+};
+
+static int sx9324_read_prox_data(struct sx_common_data *data,
+				 const struct iio_chan_spec *chan,
+				 __be16 *val)
+{
+	int ret;
+
+	ret = regmap_write(data->regmap, SX9324_REG_PHASE_SEL, chan->channel);
+	if (ret < 0)
+		return ret;
+
+	return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val));
+}
+
+/*
+ * If we have no interrupt support, we have to wait for a scan period
+ * after enabling a channel to get a result.
+ */
+static int sx9324_wait_for_sample(struct sx_common_data *data)
+{
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL0, &val);
+	if (ret < 0)
+		return ret;
+	val = FIELD_GET(SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, val);
+
+	msleep(sx9324_scan_period_table[val]);
+
+	return 0;
+}
+
+static int sx9324_read_gain(struct sx_common_data *data,
+			    const struct iio_chan_spec *chan, int *val)
+{
+	unsigned int reg, regval;
+	int ret;
+
+	reg = SX9324_REG_PROX_CTRL0 + chan->channel / 2;
+	ret = regmap_read(data->regmap, reg, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9324_REG_PROX_CTRL0_GAIN_MASK, regval);
+	if (regval)
+		regval--;
+	else if (regval == SX9324_REG_PROX_CTRL0_GAIN_RSVD ||
+		 regval > SX9324_REG_PROX_CTRL0_GAIN_8)
+		return -EINVAL;
+
+	*val = 1 << regval;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9324_read_samp_freq(struct sx_common_data *data,
+				 int *val, int *val2)
+{
+	int ret;
+	unsigned int regval;
+
+	ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL0, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, regval);
+	*val = sx9324_samp_freq_table[regval].val;
+	*val2 = sx9324_samp_freq_table[regval].val2;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int sx9324_read_raw(struct iio_dev *indio_dev,
+			   const struct iio_chan_spec *chan,
+			   int *val, int *val2, long mask)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = sx_common_read_proximity(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = sx9324_read_gain(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return sx9324_read_samp_freq(data, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const int sx9324_gain_vals[] = { 1, 2, 4, 8 };
+
+static int sx9324_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long mask)
+{
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		*type = IIO_VAL_INT;
+		*length = ARRAY_SIZE(sx9324_gain_vals);
+		*vals = sx9324_gain_vals;
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = ARRAY_SIZE(sx9324_samp_freq_table) * 2;
+		*vals = (int *)sx9324_samp_freq_table;
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9324_set_samp_freq(struct sx_common_data *data,
+				int val, int val2)
+{
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(sx9324_samp_freq_table); i++)
+		if (val == sx9324_samp_freq_table[i].val &&
+		    val2 == sx9324_samp_freq_table[i].val2)
+			break;
+
+	if (i == ARRAY_SIZE(sx9324_samp_freq_table))
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+
+	ret = regmap_update_bits(data->regmap,
+				 SX9324_REG_GNRL_CTRL0,
+				 SX9324_REG_GNRL_CTRL0_SCANPERIOD_MASK, i);
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9324_read_thresh(struct sx_common_data *data,
+			      const struct iio_chan_spec *chan, int *val)
+{
+	unsigned int regval;
+	unsigned int reg;
+	int ret;
+
+	/*
+	 * TODO(gwendal): Depending on the phase function
+	 * (proximity/table/body), retrieve the right threshold.
+	 * For now, return the proximity threshold.
+	 */
+	reg = SX9324_REG_PROX_CTRL6 + chan->channel / 2;
+	ret = regmap_read(data->regmap, reg, &regval);
+	if (ret)
+		return ret;
+
+	if (regval <= 1)
+		*val = regval;
+	else
+		*val = (regval * regval) / 2;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9324_read_hysteresis(struct sx_common_data *data,
+				  const struct iio_chan_spec *chan, int *val)
+{
+	unsigned int regval, pthresh;
+	int ret;
+
+	ret = sx9324_read_thresh(data, chan, &pthresh);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9324_REG_PROX_CTRL5_HYST_MASK, regval);
+	if (!regval)
+		*val = 0;
+	else
+		*val = pthresh >> (5 - regval);
+
+	return IIO_VAL_INT;
+}
+
+static int sx9324_read_far_debounce(struct sx_common_data *data, int *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, regval);
+	if (regval)
+		*val = 1 << regval;
+	else
+		*val = 0;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9324_read_close_debounce(struct sx_common_data *data, int *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9324_REG_PROX_CTRL5, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, regval);
+	if (regval)
+		*val = 1 << regval;
+	else
+		*val = 0;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9324_read_event_val(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir,
+				 enum iio_event_info info, int *val, int *val2)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		return sx9324_read_thresh(data, chan, val);
+	case IIO_EV_INFO_PERIOD:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			return sx9324_read_far_debounce(data, val);
+		case IIO_EV_DIR_FALLING:
+			return sx9324_read_close_debounce(data, val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_EV_INFO_HYSTERESIS:
+		return sx9324_read_hysteresis(data, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9324_write_thresh(struct sx_common_data *data,
+			       const struct iio_chan_spec *chan, int _val)
+{
+	unsigned int reg, val = _val;
+	int ret;
+
+	reg = SX9324_REG_PROX_CTRL6 + chan->channel / 2;
+
+	if (val >= 1)
+		val = int_sqrt(2 * val);
+
+	if (val > 0xff)
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_write(data->regmap, reg, val);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9324_write_hysteresis(struct sx_common_data *data,
+				   const struct iio_chan_spec *chan, int _val)
+{
+	unsigned int hyst, val = _val;
+	int ret, pthresh;
+
+	ret = sx9324_read_thresh(data, chan, &pthresh);
+	if (ret < 0)
+		return ret;
+
+	if (val == 0)
+		hyst = 0;
+	else if (val >= pthresh >> 2)
+		hyst = 3;
+	else if (val >= pthresh >> 3)
+		hyst = 2;
+	else if (val >= pthresh >> 4)
+		hyst = 1;
+	else
+		return -EINVAL;
+
+	hyst = FIELD_PREP(SX9324_REG_PROX_CTRL5_HYST_MASK, hyst);
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5,
+				 SX9324_REG_PROX_CTRL5_HYST_MASK, hyst);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9324_write_far_debounce(struct sx_common_data *data, int _val)
+{
+	unsigned int regval, val = _val;
+	int ret;
+
+	if (val > 0)
+		val = ilog2(val);
+	if (!FIELD_FIT(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, val))
+		return -EINVAL;
+
+	regval = FIELD_PREP(SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK, val);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5,
+				 SX9324_REG_PROX_CTRL5_FAR_DEBOUNCE_MASK,
+				 regval);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9324_write_close_debounce(struct sx_common_data *data, int _val)
+{
+	unsigned int regval, val = _val;
+	int ret;
+
+	if (val > 0)
+		val = ilog2(val);
+	if (!FIELD_FIT(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, val))
+		return -EINVAL;
+
+	regval = FIELD_PREP(SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK, val);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9324_REG_PROX_CTRL5,
+				 SX9324_REG_PROX_CTRL5_CLOSE_DEBOUNCE_MASK,
+				 regval);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9324_write_event_val(struct iio_dev *indio_dev,
+				  const struct iio_chan_spec *chan,
+				  enum iio_event_type type,
+				  enum iio_event_direction dir,
+				  enum iio_event_info info, int val, int val2)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		return sx9324_write_thresh(data, chan, val);
+	case IIO_EV_INFO_PERIOD:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			return sx9324_write_far_debounce(data, val);
+		case IIO_EV_DIR_FALLING:
+			return sx9324_write_close_debounce(data, val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_EV_INFO_HYSTERESIS:
+		return sx9324_write_hysteresis(data, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9324_write_gain(struct sx_common_data *data,
+			     const struct iio_chan_spec *chan, int val)
+{
+	unsigned int gain, reg;
+	int ret;
+
+	reg = SX9324_REG_PROX_CTRL0 + chan->channel / 2;
+
+	gain = ilog2(val) + 1;
+	if (val <= 0 || gain > SX9324_REG_PROX_CTRL0_GAIN_8)
+		return -EINVAL;
+
+	gain = FIELD_PREP(SX9324_REG_PROX_CTRL0_GAIN_MASK, gain);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, reg,
+				 SX9324_REG_PROX_CTRL0_GAIN_MASK,
+				 gain);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9324_write_raw(struct iio_dev *indio_dev,
+			    const struct iio_chan_spec *chan, int val, int val2,
+			    long mask)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return sx9324_set_samp_freq(data, val, val2);
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		return sx9324_write_gain(data, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct sx_common_reg_default sx9324_default_regs[] = {
+	{ SX9324_REG_IRQ_MSK, 0x00 },
+	{ SX9324_REG_IRQ_CFG0, 0x00 },
+	{ SX9324_REG_IRQ_CFG1, SX9324_REG_IRQ_CFG1_FAILCOND },
+	{ SX9324_REG_IRQ_CFG2, 0x00 },
+	{ SX9324_REG_GNRL_CTRL0, SX9324_REG_GNRL_CTRL0_SCANPERIOD_100MS },
+	/*
+	 * The lower 4 bits should not be set as it enable sensors measurements.
+	 * Turning the detection on before the configuration values are set to
+	 * good values can cause the device to return erroneous readings.
+	 */
+	{ SX9324_REG_GNRL_CTRL1, SX9324_REG_GNRL_CTRL1_PAUSECTRL },
+
+	{ SX9324_REG_AFE_CTRL0, SX9324_REG_AFE_CTRL0_RINT_LOWEST },
+	{ SX9324_REG_AFE_CTRL3, 0x00 },
+	{ SX9324_REG_AFE_CTRL4, SX9324_REG_AFE_CTRL4_FREQ_83_33HZ |
+		SX9324_REG_AFE_CTRL4_RES_100 },
+	{ SX9324_REG_AFE_CTRL6, 0x00 },
+	{ SX9324_REG_AFE_CTRL7, SX9324_REG_AFE_CTRL4_FREQ_83_33HZ |
+		SX9324_REG_AFE_CTRL4_RES_100 },
+
+	/* TODO(gwendal): PHx use chip default or all grounded? */
+	{ SX9324_REG_AFE_PH0, 0x29 },
+	{ SX9324_REG_AFE_PH1, 0x26 },
+	{ SX9324_REG_AFE_PH2, 0x1a },
+	{ SX9324_REG_AFE_PH3, 0x16 },
+
+	{ SX9324_REG_AFE_CTRL8, SX9324_REG_AFE_CTRL8_RESERVED |
+		SX9324_REG_AFE_CTRL8_RESFILTIN_4KOHM },
+	{ SX9324_REG_AFE_CTRL9, SX9324_REG_AFE_CTRL9_AGAIN_1 },
+
+	{ SX9324_REG_PROX_CTRL0,
+		SX9324_REG_PROX_CTRL0_GAIN_1 << SX9324_REG_PROX_CTRL0_GAIN_SHIFT |
+		SX9324_REG_PROX_CTRL0_RAWFILT_1P50 },
+	{ SX9324_REG_PROX_CTRL1,
+		SX9324_REG_PROX_CTRL0_GAIN_1 << SX9324_REG_PROX_CTRL0_GAIN_SHIFT |
+		SX9324_REG_PROX_CTRL0_RAWFILT_1P50 },
+	{ SX9324_REG_PROX_CTRL2, SX9324_REG_PROX_CTRL2_AVGNEG_THRESH_16K },
+	{ SX9324_REG_PROX_CTRL3, SX9324_REG_PROX_CTRL3_AVGDEB_2SAMPLES |
+		SX9324_REG_PROX_CTRL3_AVGPOS_THRESH_16K },
+	{ SX9324_REG_PROX_CTRL4, SX9324_REG_PROX_CTRL4_AVGNEG_FILT_2 |
+		SX9324_REG_PROX_CTRL4_AVGPOS_FILT_256 },
+	{ SX9324_REG_PROX_CTRL5, 0x00 },
+	{ SX9324_REG_PROX_CTRL6, SX9324_REG_PROX_CTRL6_PROXTHRESH_32 },
+	{ SX9324_REG_PROX_CTRL7, SX9324_REG_PROX_CTRL6_PROXTHRESH_32 },
+	{ SX9324_REG_ADV_CTRL0, 0x00 },
+	{ SX9324_REG_ADV_CTRL1, 0x00 },
+	{ SX9324_REG_ADV_CTRL2, 0x00 },
+	{ SX9324_REG_ADV_CTRL3, 0x00 },
+	{ SX9324_REG_ADV_CTRL4, 0x00 },
+	{ SX9324_REG_ADV_CTRL5, SX9324_REG_ADV_CTRL5_STARTUP_SENSOR_1 |
+		SX9324_REG_ADV_CTRL5_STARTUP_METHOD_1 },
+	{ SX9324_REG_ADV_CTRL6, 0x00 },
+	{ SX9324_REG_ADV_CTRL7, 0x00 },
+	{ SX9324_REG_ADV_CTRL8, 0x00 },
+	{ SX9324_REG_ADV_CTRL9, 0x00 },
+	/* Body/Table threshold */
+	{ SX9324_REG_ADV_CTRL10, 0x00 },
+	{ SX9324_REG_ADV_CTRL11, 0x00 },
+	{ SX9324_REG_ADV_CTRL12, 0x00 },
+	/* TODO(gwendal): SAR currenly disabled */
+	{ SX9324_REG_ADV_CTRL13, 0x00 },
+	{ SX9324_REG_ADV_CTRL14, 0x00 },
+	{ SX9324_REG_ADV_CTRL15, 0x00 },
+	{ SX9324_REG_ADV_CTRL16, 0x00 },
+	{ SX9324_REG_ADV_CTRL17, 0x00 },
+	{ SX9324_REG_ADV_CTRL18, 0x00 },
+	{ SX9324_REG_ADV_CTRL19, SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION },
+	{ SX9324_REG_ADV_CTRL20, SX9324_REG_ADV_CTRL19_HIGHT_FAILURE_THRESH_SATURATION },
+};
+
+/* Activate all channels and perform an initial compensation. */
+static int sx9324_init_compensation(struct iio_dev *indio_dev)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	unsigned int val;
+	int ret;
+
+	/* run the compensation phase on all channels */
+	ret = regmap_update_bits(data->regmap, SX9324_REG_STAT2,
+				 SX9324_REG_STAT2_COMPSTAT_MASK,
+				 SX9324_REG_STAT2_COMPSTAT_MASK);
+	if (ret)
+		return ret;
+
+	return regmap_read_poll_timeout(data->regmap, SX9324_REG_STAT2, val,
+					!(val & SX9324_REG_STAT2_COMPSTAT_MASK),
+					20000, 2000000);
+}
+
+static const struct sx_common_reg_default *
+sx9324_get_default_reg(struct device *dev, int idx,
+		       struct sx_common_reg_default *reg_def)
+{
+	static const char * const sx9324_rints[] = { "lowest", "low", "high",
+		"highest" };
+	static const char * const sx9324_csidle[] = { "hi-z", "hi-z", "gnd",
+		"vdd" };
+#define SX9324_PIN_DEF "semtech,ph0-pin"
+#define SX9324_RESOLUTION_DEF "semtech,ph01-resolution"
+#define SX9324_PROXRAW_DEF "semtech,ph01-proxraw-strength"
+	unsigned int pin_defs[SX9324_NUM_PINS];
+	char prop[] = SX9324_PROXRAW_DEF;
+	u32 start = 0, raw = 0, pos = 0;
+	int ret, count, ph, pin;
+	const char *res;
+
+	memcpy(reg_def, &sx9324_default_regs[idx], sizeof(*reg_def));
+	switch (reg_def->reg) {
+	case SX9324_REG_AFE_PH0:
+	case SX9324_REG_AFE_PH1:
+	case SX9324_REG_AFE_PH2:
+	case SX9324_REG_AFE_PH3:
+		ph = reg_def->reg - SX9324_REG_AFE_PH0;
+		scnprintf(prop, ARRAY_SIZE(prop), "semtech,ph%d-pin", ph);
+
+		count = device_property_count_u32(dev, prop);
+		if (count != ARRAY_SIZE(pin_defs))
+			break;
+		ret = device_property_read_u32_array(dev, prop, pin_defs,
+						     ARRAY_SIZE(pin_defs));
+		if (ret)
+			break;
+
+		for (pin = 0; pin < SX9324_NUM_PINS; pin++)
+			raw |= (pin_defs[pin] << (2 * pin)) &
+			       SX9324_REG_AFE_PH0_PIN_MASK(pin);
+		reg_def->def = raw;
+		break;
+	case SX9324_REG_AFE_CTRL0:
+		ret = device_property_read_string(dev,
+				"semtech,cs-idle-sleep", &res);
+		if (!ret)
+			ret = match_string(sx9324_csidle, ARRAY_SIZE(sx9324_csidle), res);
+		if (ret >= 0) {
+			reg_def->def &= ~SX9324_REG_AFE_CTRL0_CSIDLE_MASK;
+			reg_def->def |= ret << SX9324_REG_AFE_CTRL0_CSIDLE_SHIFT;
+		}
+
+		ret = device_property_read_string(dev,
+				"semtech,int-comp-resistor", &res);
+		if (ret)
+			break;
+		ret = match_string(sx9324_rints, ARRAY_SIZE(sx9324_rints), res);
+		if (ret < 0)
+			break;
+		reg_def->def &= ~SX9324_REG_AFE_CTRL0_RINT_MASK;
+		reg_def->def |= ret << SX9324_REG_AFE_CTRL0_RINT_SHIFT;
+		break;
+	case SX9324_REG_AFE_CTRL4:
+	case SX9324_REG_AFE_CTRL7:
+		if (reg_def->reg == SX9324_REG_AFE_CTRL4)
+			strncpy(prop, "semtech,ph01-resolution",
+				ARRAY_SIZE(prop));
+		else
+			strncpy(prop, "semtech,ph23-resolution",
+				ARRAY_SIZE(prop));
+
+		ret = device_property_read_u32(dev, prop, &raw);
+		if (ret)
+			break;
+
+		raw = ilog2(raw) - 3;
+
+		reg_def->def &= ~SX9324_REG_AFE_CTRL4_RESOLUTION_MASK;
+		reg_def->def |= FIELD_PREP(SX9324_REG_AFE_CTRL4_RESOLUTION_MASK,
+					   raw);
+		break;
+	case SX9324_REG_AFE_CTRL8:
+		ret = device_property_read_u32(dev,
+				"semtech,input-precharge-resistor-ohms",
+				&raw);
+		if (ret)
+			break;
+
+		reg_def->def &= ~SX9324_REG_AFE_CTRL8_RESFILTIN_MASK;
+		reg_def->def |= FIELD_PREP(SX9324_REG_AFE_CTRL8_RESFILTIN_MASK,
+					   raw / 2000);
+		break;
+
+	case SX9324_REG_AFE_CTRL9:
+		ret = device_property_read_u32(dev,
+				"semtech,input-analog-gain", &raw);
+		if (ret)
+			break;
+		/*
+		 * The analog gain has the following setting:
+		 * +---------+----------------+----------------+
+		 * | dt(raw) | physical value | register value |
+		 * +---------+----------------+----------------+
+		 * |  0      |      x1.247    |      6         |
+		 * |  1      |      x1        |      8         |
+		 * |  2      |      x0.768    |     11         |
+		 * |  3      |      x0.552    |     15         |
+		 * +---------+----------------+----------------+
+		 */
+		reg_def->def &= ~SX9324_REG_AFE_CTRL9_AGAIN_MASK;
+		reg_def->def |= FIELD_PREP(SX9324_REG_AFE_CTRL9_AGAIN_MASK,
+					   6 + raw * (raw + 3) / 2);
+		break;
+
+	case SX9324_REG_ADV_CTRL5:
+		ret = device_property_read_u32(dev, "semtech,startup-sensor",
+					       &start);
+		if (ret)
+			break;
+
+		reg_def->def &= ~SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK;
+		reg_def->def |= FIELD_PREP(SX9324_REG_ADV_CTRL5_STARTUPSENS_MASK,
+					   start);
+		break;
+	case SX9324_REG_PROX_CTRL4:
+		ret = device_property_read_u32(dev, "semtech,avg-pos-strength",
+					       &pos);
+		if (ret)
+			break;
+
+		/* Powers of 2, except for a gap between 16 and 64 */
+		raw = clamp(ilog2(pos), 3, 11) - (pos >= 32 ? 4 : 3);
+
+		reg_def->def &= ~SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK;
+		reg_def->def |= FIELD_PREP(SX9324_REG_PROX_CTRL4_AVGPOSFILT_MASK,
+					   raw);
+		break;
+	case SX9324_REG_PROX_CTRL0:
+	case SX9324_REG_PROX_CTRL1:
+		if (reg_def->reg == SX9324_REG_PROX_CTRL0)
+			strncpy(prop, "semtech,ph01-proxraw-strength",
+				ARRAY_SIZE(prop));
+		else
+			strncpy(prop, "semtech,ph23-proxraw-strength",
+				ARRAY_SIZE(prop));
+		ret = device_property_read_u32(dev, prop, &raw);
+		if (ret)
+			break;
+
+		reg_def->def &= ~SX9324_REG_PROX_CTRL0_RAWFILT_MASK;
+		reg_def->def |= FIELD_PREP(SX9324_REG_PROX_CTRL0_RAWFILT_MASK,
+					   raw);
+		break;
+	}
+	return reg_def;
+}
+
+static int sx9324_check_whoami(struct device *dev,
+			       struct iio_dev *indio_dev)
+{
+	/*
+	 * Only one sensor for this driver. Assuming the device tree
+	 * is correct, just set the sensor name.
+	 */
+	indio_dev->name = "sx9324";
+	return 0;
+}
+
+static const struct sx_common_chip_info sx9324_chip_info = {
+	.reg_stat = SX9324_REG_STAT0,
+	.reg_irq_msk = SX9324_REG_IRQ_MSK,
+	.reg_enable_chan = SX9324_REG_GNRL_CTRL1,
+	.reg_reset = SX9324_REG_RESET,
+
+	.mask_enable_chan = SX9324_REG_GNRL_CTRL1_PHEN_MASK,
+	.irq_msk_offset = 3,
+	.num_channels = SX9324_NUM_CHANNELS,
+	.num_default_regs = ARRAY_SIZE(sx9324_default_regs),
+
+	.ops = {
+		.read_prox_data = sx9324_read_prox_data,
+		.check_whoami = sx9324_check_whoami,
+		.init_compensation = sx9324_init_compensation,
+		.wait_for_sample = sx9324_wait_for_sample,
+		.get_default_reg = sx9324_get_default_reg,
+	},
+
+	.iio_channels = sx9324_channels,
+	.num_iio_channels = ARRAY_SIZE(sx9324_channels),
+	.iio_info =  {
+		.read_raw = sx9324_read_raw,
+		.read_avail = sx9324_read_avail,
+		.read_event_value = sx9324_read_event_val,
+		.write_event_value = sx9324_write_event_val,
+		.write_raw = sx9324_write_raw,
+		.read_event_config = sx_common_read_event_config,
+		.write_event_config = sx_common_write_event_config,
+	},
+};
+
+static int sx9324_probe(struct i2c_client *client)
+{
+	return sx_common_probe(client, &sx9324_chip_info, &sx9324_regmap_config);
+}
+
+static int sx9324_suspend(struct device *dev)
+{
+	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
+	unsigned int regval;
+	int ret;
+
+	disable_irq_nosync(data->client->irq);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_read(data->regmap, SX9324_REG_GNRL_CTRL1, &regval);
+
+	data->suspend_ctrl =
+		FIELD_GET(SX9324_REG_GNRL_CTRL1_PHEN_MASK, regval);
+
+	if (ret < 0)
+		goto out;
+
+	/* Disable all phases, send the device to sleep. */
+	ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1, 0);
+
+out:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static int sx9324_resume(struct device *dev)
+{
+	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_write(data->regmap, SX9324_REG_GNRL_CTRL1,
+			   data->suspend_ctrl | SX9324_REG_GNRL_CTRL1_PAUSECTRL);
+	mutex_unlock(&data->mutex);
+	if (ret)
+		return ret;
+
+	enable_irq(data->client->irq);
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(sx9324_pm_ops, sx9324_suspend, sx9324_resume);
+
+static const struct acpi_device_id sx9324_acpi_match[] = {
+	{ "STH9324", SX9324_WHOAMI_VALUE },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, sx9324_acpi_match);
+
+static const struct of_device_id sx9324_of_match[] = {
+	{ .compatible = "semtech,sx9324", (void *)SX9324_WHOAMI_VALUE },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sx9324_of_match);
+
+static const struct i2c_device_id sx9324_id[] = {
+	{ "sx9324", SX9324_WHOAMI_VALUE },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sx9324_id);
+
+static struct i2c_driver sx9324_driver = {
+	.driver = {
+		.name	= "sx9324",
+		.acpi_match_table = sx9324_acpi_match,
+		.of_match_table = sx9324_of_match,
+		.pm = pm_sleep_ptr(&sx9324_pm_ops),
+
+		/*
+		 * Lots of i2c transfers in probe + over 200 ms waiting in
+		 * sx9324_init_compensation() mean a slow probe; prefer async
+		 * so we don't delay boot if we're builtin to the kernel.
+		 */
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.probe_new	= sx9324_probe,
+	.id_table	= sx9324_id,
+};
+module_i2c_driver(sx9324_driver);
+
+MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>");
+MODULE_DESCRIPTION("Driver for Semtech SX9324 proximity sensor");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(SEMTECH_PROX);
diff --git a/drivers/iio/proximity/sx9360.c b/drivers/iio/proximity/sx9360.c
new file mode 100644
index 000000000..7fa2213d2
--- /dev/null
+++ b/drivers/iio/proximity/sx9360.c
@@ -0,0 +1,906 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Google LLC.
+ *
+ * Driver for Semtech's SX9360 capacitive proximity/button solution.
+ * Based on SX9360 driver and copy of datasheet at:
+ * https://edit.wpgdadawant.com/uploads/news_file/program/2019/30184/tech_files/program_30184_suggest_other_file.pdf
+ */
+
+#include <linux/acpi.h>
+#include <linux/bits.h>
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/log2.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#include <linux/iio/iio.h>
+
+#include "sx_common.h"
+
+/* Nominal Oscillator Frequency. */
+#define SX9360_FOSC_MHZ			4
+#define SX9360_FOSC_HZ			(SX9360_FOSC_MHZ * 1000000)
+
+/* Register definitions. */
+#define SX9360_REG_IRQ_SRC		SX_COMMON_REG_IRQ_SRC
+#define SX9360_REG_STAT		0x01
+#define SX9360_REG_STAT_COMPSTAT_MASK	GENMASK(2, 1)
+#define SX9360_REG_IRQ_MSK		0x02
+#define SX9360_CONVDONE_IRQ		BIT(0)
+#define SX9360_FAR_IRQ			BIT(2)
+#define SX9360_CLOSE_IRQ		BIT(3)
+#define SX9360_REG_IRQ_CFG		0x03
+
+#define SX9360_REG_GNRL_CTRL0		0x10
+#define SX9360_REG_GNRL_CTRL0_PHEN_MASK GENMASK(1, 0)
+#define SX9360_REG_GNRL_CTRL1		0x11
+#define SX9360_REG_GNRL_CTRL1_SCANPERIOD_MASK GENMASK(2, 0)
+#define SX9360_REG_GNRL_CTRL2		0x12
+#define SX9360_REG_GNRL_CTRL2_PERIOD_102MS	0x32
+#define SX9360_REG_GNRL_REG_2_PERIOD_MS(_r)	\
+	(((_r) * 8192) / (SX9360_FOSC_HZ / 1000))
+#define SX9360_REG_GNRL_FREQ_2_REG(_f)  (((_f) * 8192) / SX9360_FOSC_HZ)
+#define SX9360_REG_GNRL_REG_2_FREQ(_r)  (SX9360_FOSC_HZ / ((_r) * 8192))
+
+#define SX9360_REG_AFE_CTRL1		0x21
+#define SX9360_REG_AFE_CTRL1_RESFILTIN_MASK GENMASK(3, 0)
+#define SX9360_REG_AFE_CTRL1_RESFILTIN_0OHMS 0
+#define SX9360_REG_AFE_PARAM0_PHR	0x22
+#define SX9360_REG_AFE_PARAM1_PHR	0x23
+#define SX9360_REG_AFE_PARAM0_PHM	0x24
+#define SX9360_REG_AFE_PARAM0_RSVD		0x08
+#define SX9360_REG_AFE_PARAM0_RESOLUTION_MASK	GENMASK(2, 0)
+#define SX9360_REG_AFE_PARAM0_RESOLUTION_128	0x02
+#define SX9360_REG_AFE_PARAM1_PHM	0x25
+#define SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF	0x40
+#define SX9360_REG_AFE_PARAM1_FREQ_83_33HZ	0x06
+
+#define SX9360_REG_PROX_CTRL0_PHR	0x40
+#define SX9360_REG_PROX_CTRL0_PHM	0x41
+#define SX9360_REG_PROX_CTRL0_GAIN_MASK	GENMASK(5, 3)
+#define SX9360_REG_PROX_CTRL0_GAIN_1		0x80
+#define SX9360_REG_PROX_CTRL0_RAWFILT_MASK	GENMASK(2, 0)
+#define SX9360_REG_PROX_CTRL0_RAWFILT_1P50	0x01
+#define SX9360_REG_PROX_CTRL1		0x42
+#define SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_MASK	GENMASK(5, 3)
+#define SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_16K 0x20
+#define SX9360_REG_PROX_CTRL2		0x43
+#define SX9360_REG_PROX_CTRL2_AVGDEB_MASK	GENMASK(7, 6)
+#define SX9360_REG_PROX_CTRL2_AVGDEB_2SAMPLES	0x40
+#define SX9360_REG_PROX_CTRL2_AVGPOS_THRESH_16K	0x20
+#define SX9360_REG_PROX_CTRL3		0x44
+#define SX9360_REG_PROX_CTRL3_AVGNEG_FILT_MASK	GENMASK(5, 3)
+#define SX9360_REG_PROX_CTRL3_AVGNEG_FILT_2	0x08
+#define SX9360_REG_PROX_CTRL3_AVGPOS_FILT_MASK	GENMASK(2, 0)
+#define SX9360_REG_PROX_CTRL3_AVGPOS_FILT_256	0x04
+#define SX9360_REG_PROX_CTRL4		0x45
+#define SX9360_REG_PROX_CTRL4_HYST_MASK			GENMASK(5, 4)
+#define SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK	GENMASK(3, 2)
+#define SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK		GENMASK(1, 0)
+#define SX9360_REG_PROX_CTRL5		0x46
+#define SX9360_REG_PROX_CTRL5_PROXTHRESH_32	0x08
+
+#define SX9360_REG_REF_CORR0		0x60
+#define SX9360_REG_REF_CORR1		0x61
+
+#define SX9360_REG_USEFUL_PHR_MSB		0x90
+#define SX9360_REG_USEFUL_PHR_LSB		0x91
+
+#define SX9360_REG_OFFSET_PMR_MSB		0x92
+#define SX9360_REG_OFFSET_PMR_LSB		0x93
+
+#define SX9360_REG_USEFUL_PHM_MSB		0x94
+#define SX9360_REG_USEFUL_PHM_LSB		0x95
+
+#define SX9360_REG_AVG_PHM_MSB		0x96
+#define SX9360_REG_AVG_PHM_LSB		0x97
+
+#define SX9360_REG_DIFF_PHM_MSB		0x98
+#define SX9360_REG_DIFF_PHM_LSB		0x99
+
+#define SX9360_REG_OFFSET_PHM_MSB		0x9a
+#define SX9360_REG_OFFSET_PHM_LSB		0x9b
+
+#define SX9360_REG_USE_FILTER_MSB		0x9a
+#define SX9360_REG_USE_FILTER_LSB		0x9b
+
+#define SX9360_REG_RESET		0xcf
+/* Write this to REG_RESET to do a soft reset. */
+#define SX9360_SOFT_RESET		0xde
+
+#define SX9360_REG_WHOAMI		0xfa
+#define   SX9360_WHOAMI_VALUE				0x60
+
+#define SX9360_REG_REVISION		0xfe
+
+/* 2 channels, Phase Reference and Measurement. */
+#define SX9360_NUM_CHANNELS		2
+
+static const struct iio_chan_spec sx9360_channels[] = {
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_HARDWAREGAIN),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_separate_available =
+			BIT(IIO_CHAN_INFO_HARDWAREGAIN),
+		.info_mask_shared_by_all_available =
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.indexed = 1,
+		.address = SX9360_REG_USEFUL_PHR_MSB,
+		.channel = 0,
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 12,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_HARDWAREGAIN),
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_separate_available =
+			BIT(IIO_CHAN_INFO_HARDWAREGAIN),
+		.info_mask_shared_by_all_available =
+			BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.indexed = 1,
+		.address = SX9360_REG_USEFUL_PHM_MSB,
+		.event_spec = sx_common_events,
+		.num_event_specs = ARRAY_SIZE(sx_common_events),
+		.channel = 1,
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 's',
+			.realbits = 12,
+			.storagebits = 16,
+			.endianness = IIO_BE,
+		},
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(2),
+};
+
+/*
+ * Each entry contains the integer part (val) and the fractional part, in micro
+ * seconds. It conforms to the IIO output IIO_VAL_INT_PLUS_MICRO.
+ *
+ * The frequency control register holds the period, with a ~2ms increment.
+ * Therefore the smallest frequency is 4MHz / (2047 * 8192),
+ * The fastest is 4MHz / 8192.
+ * The interval is not linear, but given there is 2047 possible value,
+ * Returns the fake increment of (Max-Min)/2047
+ */
+static const struct {
+	int val;
+	int val2;
+} sx9360_samp_freq_interval[] = {
+	{ 0, 281250 },  /* 4MHz / (8192 * 2047) */
+	{ 0, 281250 },
+	{ 448, 281250 },  /* 4MHz / 8192 */
+};
+
+static const struct regmap_range sx9360_writable_reg_ranges[] = {
+	/*
+	 * To set COMPSTAT for compensation, even if datasheet says register is
+	 * RO.
+	 */
+	regmap_reg_range(SX9360_REG_STAT, SX9360_REG_IRQ_CFG),
+	regmap_reg_range(SX9360_REG_GNRL_CTRL0, SX9360_REG_GNRL_CTRL2),
+	regmap_reg_range(SX9360_REG_AFE_CTRL1, SX9360_REG_AFE_PARAM1_PHM),
+	regmap_reg_range(SX9360_REG_PROX_CTRL0_PHR, SX9360_REG_PROX_CTRL5),
+	regmap_reg_range(SX9360_REG_REF_CORR0, SX9360_REG_REF_CORR1),
+	regmap_reg_range(SX9360_REG_OFFSET_PMR_MSB, SX9360_REG_OFFSET_PMR_LSB),
+	regmap_reg_range(SX9360_REG_RESET, SX9360_REG_RESET),
+};
+
+static const struct regmap_access_table sx9360_writeable_regs = {
+	.yes_ranges = sx9360_writable_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9360_writable_reg_ranges),
+};
+
+/*
+ * All allocated registers are readable, so we just list unallocated
+ * ones.
+ */
+static const struct regmap_range sx9360_non_readable_reg_ranges[] = {
+	regmap_reg_range(SX9360_REG_IRQ_CFG + 1, SX9360_REG_GNRL_CTRL0 - 1),
+	regmap_reg_range(SX9360_REG_GNRL_CTRL2 + 1, SX9360_REG_AFE_CTRL1 - 1),
+	regmap_reg_range(SX9360_REG_AFE_PARAM1_PHM + 1,
+			 SX9360_REG_PROX_CTRL0_PHR - 1),
+	regmap_reg_range(SX9360_REG_PROX_CTRL5 + 1, SX9360_REG_REF_CORR0 - 1),
+	regmap_reg_range(SX9360_REG_REF_CORR1 + 1,
+			 SX9360_REG_USEFUL_PHR_MSB - 1),
+	regmap_reg_range(SX9360_REG_USE_FILTER_LSB + 1, SX9360_REG_RESET - 1),
+	regmap_reg_range(SX9360_REG_RESET + 1, SX9360_REG_WHOAMI - 1),
+	regmap_reg_range(SX9360_REG_WHOAMI + 1, SX9360_REG_REVISION - 1),
+};
+
+static const struct regmap_access_table sx9360_readable_regs = {
+	.no_ranges = sx9360_non_readable_reg_ranges,
+	.n_no_ranges = ARRAY_SIZE(sx9360_non_readable_reg_ranges),
+};
+
+static const struct regmap_range sx9360_volatile_reg_ranges[] = {
+	regmap_reg_range(SX9360_REG_IRQ_SRC, SX9360_REG_STAT),
+	regmap_reg_range(SX9360_REG_USEFUL_PHR_MSB, SX9360_REG_USE_FILTER_LSB),
+	regmap_reg_range(SX9360_REG_WHOAMI, SX9360_REG_WHOAMI),
+	regmap_reg_range(SX9360_REG_REVISION, SX9360_REG_REVISION),
+};
+
+static const struct regmap_access_table sx9360_volatile_regs = {
+	.yes_ranges = sx9360_volatile_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9360_volatile_reg_ranges),
+};
+
+static const struct regmap_config sx9360_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = SX9360_REG_REVISION,
+	.cache_type = REGCACHE_RBTREE,
+
+	.wr_table = &sx9360_writeable_regs,
+	.rd_table = &sx9360_readable_regs,
+	.volatile_table = &sx9360_volatile_regs,
+};
+
+static int sx9360_read_prox_data(struct sx_common_data *data,
+				 const struct iio_chan_spec *chan,
+				 __be16 *val)
+{
+	return regmap_bulk_read(data->regmap, chan->address, val, sizeof(*val));
+}
+
+/*
+ * If we have no interrupt support, we have to wait for a scan period
+ * after enabling a channel to get a result.
+ */
+static int sx9360_wait_for_sample(struct sx_common_data *data)
+{
+	int ret;
+	__be16 buf;
+
+	ret = regmap_bulk_read(data->regmap, SX9360_REG_GNRL_CTRL1,
+			       &buf, sizeof(buf));
+	if (ret < 0)
+		return ret;
+	msleep(SX9360_REG_GNRL_REG_2_PERIOD_MS(be16_to_cpu(buf)));
+
+	return 0;
+}
+
+static int sx9360_read_gain(struct sx_common_data *data,
+			    const struct iio_chan_spec *chan, int *val)
+{
+	unsigned int reg, regval;
+	int ret;
+
+	reg = SX9360_REG_PROX_CTRL0_PHR + chan->channel;
+	ret = regmap_read(data->regmap, reg, &regval);
+	if (ret)
+		return ret;
+
+	*val = 1 << FIELD_GET(SX9360_REG_PROX_CTRL0_GAIN_MASK, regval);
+
+	return IIO_VAL_INT;
+}
+
+static int sx9360_read_samp_freq(struct sx_common_data *data,
+				 int *val, int *val2)
+{
+	int ret, divisor;
+	__be16 buf;
+
+	ret = regmap_bulk_read(data->regmap, SX9360_REG_GNRL_CTRL1,
+			       &buf, sizeof(buf));
+	if (ret < 0)
+		return ret;
+	divisor = be16_to_cpu(buf);
+	if (divisor == 0) {
+		*val = 0;
+		return IIO_VAL_INT;
+	}
+
+	*val = SX9360_FOSC_HZ;
+	*val2 = divisor * 8192;
+
+	return IIO_VAL_FRACTIONAL;
+}
+
+static int sx9360_read_raw(struct iio_dev *indio_dev,
+			   const struct iio_chan_spec *chan,
+			   int *val, int *val2, long mask)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = sx_common_read_proximity(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		ret = iio_device_claim_direct_mode(indio_dev);
+		if (ret)
+			return ret;
+
+		ret = sx9360_read_gain(data, chan, val);
+		iio_device_release_direct_mode(indio_dev);
+		return ret;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return sx9360_read_samp_freq(data, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const char *sx9360_channel_labels[SX9360_NUM_CHANNELS] = {
+	"reference", "main",
+};
+
+static int sx9360_read_label(struct iio_dev *iio_dev, const struct iio_chan_spec *chan,
+			     char *label)
+{
+	return sysfs_emit(label, "%s\n", sx9360_channel_labels[chan->channel]);
+}
+
+static const int sx9360_gain_vals[] = { 1, 2, 4, 8 };
+
+static int sx9360_read_avail(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan,
+			     const int **vals, int *type, int *length,
+			     long mask)
+{
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		*type = IIO_VAL_INT;
+		*length = ARRAY_SIZE(sx9360_gain_vals);
+		*vals = sx9360_gain_vals;
+		return IIO_AVAIL_LIST;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = ARRAY_SIZE(sx9360_samp_freq_interval) * 2;
+		*vals = (int *)sx9360_samp_freq_interval;
+		return IIO_AVAIL_RANGE;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9360_set_samp_freq(struct sx_common_data *data,
+				int val, int val2)
+{
+	int ret, reg;
+	__be16 buf;
+
+	reg = val * 8192 / SX9360_FOSC_HZ + val2 * 8192 / (SX9360_FOSC_MHZ);
+	buf = cpu_to_be16(reg);
+	mutex_lock(&data->mutex);
+
+	ret = regmap_bulk_write(data->regmap, SX9360_REG_GNRL_CTRL1, &buf,
+				sizeof(buf));
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9360_read_thresh(struct sx_common_data *data, int *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9360_REG_PROX_CTRL5, &regval);
+	if (ret)
+		return ret;
+
+	if (regval <= 1)
+		*val = regval;
+	else
+		*val = (regval * regval) / 2;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9360_read_hysteresis(struct sx_common_data *data, int *val)
+{
+	unsigned int regval, pthresh;
+	int ret;
+
+	ret = sx9360_read_thresh(data, &pthresh);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(data->regmap, SX9360_REG_PROX_CTRL4, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9360_REG_PROX_CTRL4_HYST_MASK, regval);
+	if (!regval)
+		*val = 0;
+	else
+		*val = pthresh >> (5 - regval);
+
+	return IIO_VAL_INT;
+}
+
+static int sx9360_read_far_debounce(struct sx_common_data *data, int *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9360_REG_PROX_CTRL4, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, regval);
+	if (regval)
+		*val = 1 << regval;
+	else
+		*val = 0;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9360_read_close_debounce(struct sx_common_data *data, int *val)
+{
+	unsigned int regval;
+	int ret;
+
+	ret = regmap_read(data->regmap, SX9360_REG_PROX_CTRL4, &regval);
+	if (ret)
+		return ret;
+
+	regval = FIELD_GET(SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, regval);
+	if (regval)
+		*val = 1 << regval;
+	else
+		*val = 0;
+
+	return IIO_VAL_INT;
+}
+
+static int sx9360_read_event_val(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir,
+				 enum iio_event_info info, int *val, int *val2)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		return sx9360_read_thresh(data, val);
+	case IIO_EV_INFO_PERIOD:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			return sx9360_read_far_debounce(data, val);
+		case IIO_EV_DIR_FALLING:
+			return sx9360_read_close_debounce(data, val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_EV_INFO_HYSTERESIS:
+		return sx9360_read_hysteresis(data, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9360_write_thresh(struct sx_common_data *data, int _val)
+{
+	unsigned int val = _val;
+	int ret;
+
+	if (val >= 1)
+		val = int_sqrt(2 * val);
+
+	if (val > 0xff)
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_write(data->regmap, SX9360_REG_PROX_CTRL5, val);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9360_write_hysteresis(struct sx_common_data *data, int _val)
+{
+	unsigned int hyst, val = _val;
+	int ret, pthresh;
+
+	ret = sx9360_read_thresh(data, &pthresh);
+	if (ret < 0)
+		return ret;
+
+	if (val == 0)
+		hyst = 0;
+	else if (val >= pthresh >> 2)
+		hyst = 3;
+	else if (val >= pthresh >> 3)
+		hyst = 2;
+	else if (val >= pthresh >> 4)
+		hyst = 1;
+	else
+		return -EINVAL;
+
+	hyst = FIELD_PREP(SX9360_REG_PROX_CTRL4_HYST_MASK, hyst);
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4,
+				 SX9360_REG_PROX_CTRL4_HYST_MASK, hyst);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9360_write_far_debounce(struct sx_common_data *data, int _val)
+{
+	unsigned int regval, val = _val;
+	int ret;
+
+	if (val > 0)
+		val = ilog2(val);
+	if (!FIELD_FIT(SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, val))
+		return -EINVAL;
+
+	regval = FIELD_PREP(SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK, val);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4,
+				 SX9360_REG_PROX_CTRL4_FAR_DEBOUNCE_MASK,
+				 regval);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9360_write_close_debounce(struct sx_common_data *data, int _val)
+{
+	unsigned int regval, val = _val;
+	int ret;
+
+	if (val > 0)
+		val = ilog2(val);
+	if (!FIELD_FIT(SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, val))
+		return -EINVAL;
+
+	regval = FIELD_PREP(SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK, val);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9360_REG_PROX_CTRL4,
+				 SX9360_REG_PROX_CTRL4_CLOSE_DEBOUNCE_MASK,
+				 regval);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9360_write_event_val(struct iio_dev *indio_dev,
+				  const struct iio_chan_spec *chan,
+				  enum iio_event_type type,
+				  enum iio_event_direction dir,
+				  enum iio_event_info info, int val, int val2)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY)
+		return -EINVAL;
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		return sx9360_write_thresh(data, val);
+	case IIO_EV_INFO_PERIOD:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			return sx9360_write_far_debounce(data, val);
+		case IIO_EV_DIR_FALLING:
+			return sx9360_write_close_debounce(data, val);
+		default:
+			return -EINVAL;
+		}
+	case IIO_EV_INFO_HYSTERESIS:
+		return sx9360_write_hysteresis(data, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9360_write_gain(struct sx_common_data *data,
+			     const struct iio_chan_spec *chan, int val)
+{
+	unsigned int gain, reg;
+	int ret;
+
+	gain = ilog2(val);
+	reg = SX9360_REG_PROX_CTRL0_PHR + chan->channel;
+	gain = FIELD_PREP(SX9360_REG_PROX_CTRL0_GAIN_MASK, gain);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, reg,
+				 SX9360_REG_PROX_CTRL0_GAIN_MASK,
+				 gain);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9360_write_raw(struct iio_dev *indio_dev,
+			    const struct iio_chan_spec *chan, int val, int val2,
+			    long mask)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return sx9360_set_samp_freq(data, val, val2);
+	case IIO_CHAN_INFO_HARDWAREGAIN:
+		return sx9360_write_gain(data, chan, val);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct sx_common_reg_default sx9360_default_regs[] = {
+	{ SX9360_REG_IRQ_MSK, 0x00 },
+	{ SX9360_REG_IRQ_CFG, 0x00 },
+	/*
+	 * The lower 2 bits should not be set as it enable sensors measurements.
+	 * Turning the detection on before the configuration values are set to
+	 * good values can cause the device to return erroneous readings.
+	 */
+	{ SX9360_REG_GNRL_CTRL0, 0x00 },
+	{ SX9360_REG_GNRL_CTRL1, 0x00 },
+	{ SX9360_REG_GNRL_CTRL2, SX9360_REG_GNRL_CTRL2_PERIOD_102MS },
+
+	{ SX9360_REG_AFE_CTRL1, SX9360_REG_AFE_CTRL1_RESFILTIN_0OHMS },
+	{ SX9360_REG_AFE_PARAM0_PHR, SX9360_REG_AFE_PARAM0_RSVD |
+		SX9360_REG_AFE_PARAM0_RESOLUTION_128 },
+	{ SX9360_REG_AFE_PARAM1_PHR, SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF |
+		SX9360_REG_AFE_PARAM1_FREQ_83_33HZ },
+	{ SX9360_REG_AFE_PARAM0_PHM, SX9360_REG_AFE_PARAM0_RSVD |
+		SX9360_REG_AFE_PARAM0_RESOLUTION_128 },
+	{ SX9360_REG_AFE_PARAM1_PHM, SX9360_REG_AFE_PARAM1_AGAIN_PHM_6PF |
+		SX9360_REG_AFE_PARAM1_FREQ_83_33HZ },
+
+	{ SX9360_REG_PROX_CTRL0_PHR, SX9360_REG_PROX_CTRL0_GAIN_1 |
+		SX9360_REG_PROX_CTRL0_RAWFILT_1P50 },
+	{ SX9360_REG_PROX_CTRL0_PHM, SX9360_REG_PROX_CTRL0_GAIN_1 |
+		SX9360_REG_PROX_CTRL0_RAWFILT_1P50 },
+	{ SX9360_REG_PROX_CTRL1, SX9360_REG_PROX_CTRL1_AVGNEG_THRESH_16K },
+	{ SX9360_REG_PROX_CTRL2, SX9360_REG_PROX_CTRL2_AVGDEB_2SAMPLES |
+		SX9360_REG_PROX_CTRL2_AVGPOS_THRESH_16K },
+	{ SX9360_REG_PROX_CTRL3, SX9360_REG_PROX_CTRL3_AVGNEG_FILT_2 |
+		SX9360_REG_PROX_CTRL3_AVGPOS_FILT_256 },
+	{ SX9360_REG_PROX_CTRL4, 0x00 },
+	{ SX9360_REG_PROX_CTRL5, SX9360_REG_PROX_CTRL5_PROXTHRESH_32 },
+};
+
+/* Activate all channels and perform an initial compensation. */
+static int sx9360_init_compensation(struct iio_dev *indio_dev)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	unsigned int val;
+	int ret;
+
+	/* run the compensation phase on all channels */
+	ret = regmap_update_bits(data->regmap, SX9360_REG_STAT,
+				 SX9360_REG_STAT_COMPSTAT_MASK,
+				 SX9360_REG_STAT_COMPSTAT_MASK);
+	if (ret)
+		return ret;
+
+	return regmap_read_poll_timeout(data->regmap, SX9360_REG_STAT, val,
+				       !(val & SX9360_REG_STAT_COMPSTAT_MASK),
+				       20000, 2000000);
+}
+
+static const struct sx_common_reg_default *
+sx9360_get_default_reg(struct device *dev, int idx,
+		       struct sx_common_reg_default *reg_def)
+{
+	u32 raw = 0, pos = 0;
+	int ret;
+
+	memcpy(reg_def, &sx9360_default_regs[idx], sizeof(*reg_def));
+	switch (reg_def->reg) {
+	case SX9360_REG_AFE_CTRL1:
+		ret = device_property_read_u32(dev,
+				"semtech,input-precharge-resistor-ohms",
+				&raw);
+		if (ret)
+			break;
+
+		reg_def->def &= ~SX9360_REG_AFE_CTRL1_RESFILTIN_MASK;
+		reg_def->def |= FIELD_PREP(SX9360_REG_AFE_CTRL1_RESFILTIN_MASK,
+					   raw / 2000);
+		break;
+	case SX9360_REG_AFE_PARAM0_PHR:
+	case SX9360_REG_AFE_PARAM0_PHM:
+		ret = device_property_read_u32(dev, "semtech,resolution", &raw);
+		if (ret)
+			break;
+
+		raw = ilog2(raw) - 3;
+
+		reg_def->def &= ~SX9360_REG_AFE_PARAM0_RESOLUTION_MASK;
+		reg_def->def |= FIELD_PREP(SX9360_REG_AFE_PARAM0_RESOLUTION_MASK, raw);
+		break;
+	case SX9360_REG_PROX_CTRL0_PHR:
+	case SX9360_REG_PROX_CTRL0_PHM:
+		ret = device_property_read_u32(dev, "semtech,proxraw-strength", &raw);
+		if (ret)
+			break;
+
+		reg_def->def &= ~SX9360_REG_PROX_CTRL0_RAWFILT_MASK;
+		reg_def->def |= FIELD_PREP(SX9360_REG_PROX_CTRL0_RAWFILT_MASK, raw);
+		break;
+	case SX9360_REG_PROX_CTRL3:
+		ret = device_property_read_u32(dev, "semtech,avg-pos-strength",
+					       &pos);
+		if (ret)
+			break;
+
+		/* Powers of 2, except for a gap between 16 and 64 */
+		raw = clamp(ilog2(pos), 3, 11) - (pos >= 32 ? 4 : 3);
+		reg_def->def &= ~SX9360_REG_PROX_CTRL3_AVGPOS_FILT_MASK;
+		reg_def->def |= FIELD_PREP(SX9360_REG_PROX_CTRL3_AVGPOS_FILT_MASK, raw);
+		break;
+	}
+
+	return reg_def;
+}
+
+static int sx9360_check_whoami(struct device *dev, struct iio_dev *indio_dev)
+{
+	/*
+	 * Only one sensor for this driver. Assuming the device tree
+	 * is correct, just set the sensor name.
+	 */
+	indio_dev->name = "sx9360";
+	return 0;
+}
+
+static const struct sx_common_chip_info sx9360_chip_info = {
+	.reg_stat = SX9360_REG_STAT,
+	.reg_irq_msk = SX9360_REG_IRQ_MSK,
+	.reg_enable_chan = SX9360_REG_GNRL_CTRL0,
+	.reg_reset = SX9360_REG_RESET,
+
+	.mask_enable_chan = SX9360_REG_GNRL_CTRL0_PHEN_MASK,
+	.stat_offset = 2,
+	.num_channels = SX9360_NUM_CHANNELS,
+	.num_default_regs = ARRAY_SIZE(sx9360_default_regs),
+
+	.ops = {
+		.read_prox_data = sx9360_read_prox_data,
+		.check_whoami = sx9360_check_whoami,
+		.init_compensation = sx9360_init_compensation,
+		.wait_for_sample = sx9360_wait_for_sample,
+		.get_default_reg = sx9360_get_default_reg,
+	},
+
+	.iio_channels = sx9360_channels,
+	.num_iio_channels = ARRAY_SIZE(sx9360_channels),
+	.iio_info =  {
+		.read_raw = sx9360_read_raw,
+		.read_avail = sx9360_read_avail,
+		.read_label = sx9360_read_label,
+		.read_event_value = sx9360_read_event_val,
+		.write_event_value = sx9360_write_event_val,
+		.write_raw = sx9360_write_raw,
+		.read_event_config = sx_common_read_event_config,
+		.write_event_config = sx_common_write_event_config,
+	},
+};
+
+static int sx9360_probe(struct i2c_client *client)
+{
+	return sx_common_probe(client, &sx9360_chip_info, &sx9360_regmap_config);
+}
+
+static int sx9360_suspend(struct device *dev)
+{
+	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
+	unsigned int regval;
+	int ret;
+
+	disable_irq_nosync(data->client->irq);
+
+	mutex_lock(&data->mutex);
+	ret = regmap_read(data->regmap, SX9360_REG_GNRL_CTRL0, &regval);
+
+	data->suspend_ctrl =
+		FIELD_GET(SX9360_REG_GNRL_CTRL0_PHEN_MASK, regval);
+
+	if (ret < 0)
+		goto out;
+
+	/* Disable all phases, send the device to sleep. */
+	ret = regmap_write(data->regmap, SX9360_REG_GNRL_CTRL0, 0);
+
+out:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static int sx9360_resume(struct device *dev)
+{
+	struct sx_common_data *data = iio_priv(dev_get_drvdata(dev));
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_update_bits(data->regmap, SX9360_REG_GNRL_CTRL0,
+				 SX9360_REG_GNRL_CTRL0_PHEN_MASK,
+				 data->suspend_ctrl);
+	mutex_unlock(&data->mutex);
+	if (ret)
+		return ret;
+
+	enable_irq(data->client->irq);
+	return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(sx9360_pm_ops, sx9360_suspend, sx9360_resume);
+
+static const struct acpi_device_id sx9360_acpi_match[] = {
+	{ "STH9360", SX9360_WHOAMI_VALUE },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, sx9360_acpi_match);
+
+static const struct of_device_id sx9360_of_match[] = {
+	{ .compatible = "semtech,sx9360", (void *)SX9360_WHOAMI_VALUE },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sx9360_of_match);
+
+static const struct i2c_device_id sx9360_id[] = {
+	{"sx9360", SX9360_WHOAMI_VALUE },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, sx9360_id);
+
+static struct i2c_driver sx9360_driver = {
+	.driver = {
+		.name	= "sx9360",
+		.acpi_match_table = sx9360_acpi_match,
+		.of_match_table = sx9360_of_match,
+		.pm = pm_sleep_ptr(&sx9360_pm_ops),
+
+		/*
+		 * Lots of i2c transfers in probe + over 200 ms waiting in
+		 * sx9360_init_compensation() mean a slow probe; prefer async
+		 * so we don't delay boot if we're builtin to the kernel.
+		 */
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+	.probe_new	= sx9360_probe,
+	.id_table	= sx9360_id,
+};
+module_i2c_driver(sx9360_driver);
+
+MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>");
+MODULE_DESCRIPTION("Driver for Semtech SX9360 proximity sensor");
+MODULE_LICENSE("GPL v2");
+MODULE_IMPORT_NS(SEMTECH_PROX);
diff --git a/drivers/iio/proximity/sx9500.c b/drivers/iio/proximity/sx9500.c
new file mode 100644
index 000000000..d4670864d
--- /dev/null
+++ b/drivers/iio/proximity/sx9500.c
@@ -0,0 +1,1067 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * Driver for Semtech's SX9500 capacitive proximity/button solution.
+ * Datasheet available at
+ * <http://www.semtech.com/images/datasheet/sx9500.pdf>.
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/acpi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regmap.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/sysfs.h>
+#include <linux/iio/events.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#define SX9500_DRIVER_NAME		"sx9500"
+#define SX9500_IRQ_NAME			"sx9500_event"
+
+/* Register definitions. */
+#define SX9500_REG_IRQ_SRC		0x00
+#define SX9500_REG_STAT			0x01
+#define SX9500_REG_IRQ_MSK		0x03
+
+#define SX9500_REG_PROX_CTRL0		0x06
+#define SX9500_REG_PROX_CTRL1		0x07
+#define SX9500_REG_PROX_CTRL2		0x08
+#define SX9500_REG_PROX_CTRL3		0x09
+#define SX9500_REG_PROX_CTRL4		0x0a
+#define SX9500_REG_PROX_CTRL5		0x0b
+#define SX9500_REG_PROX_CTRL6		0x0c
+#define SX9500_REG_PROX_CTRL7		0x0d
+#define SX9500_REG_PROX_CTRL8		0x0e
+
+#define SX9500_REG_SENSOR_SEL		0x20
+#define SX9500_REG_USE_MSB		0x21
+#define SX9500_REG_USE_LSB		0x22
+#define SX9500_REG_AVG_MSB		0x23
+#define SX9500_REG_AVG_LSB		0x24
+#define SX9500_REG_DIFF_MSB		0x25
+#define SX9500_REG_DIFF_LSB		0x26
+#define SX9500_REG_OFFSET_MSB		0x27
+#define SX9500_REG_OFFSET_LSB		0x28
+
+#define SX9500_REG_RESET		0x7f
+
+/* Write this to REG_RESET to do a soft reset. */
+#define SX9500_SOFT_RESET		0xde
+
+#define SX9500_SCAN_PERIOD_MASK		GENMASK(6, 4)
+#define SX9500_SCAN_PERIOD_SHIFT	4
+
+/*
+ * These serve for identifying IRQ source in the IRQ_SRC register, and
+ * also for masking the IRQs in the IRQ_MSK register.
+ */
+#define SX9500_CLOSE_IRQ		BIT(6)
+#define SX9500_FAR_IRQ			BIT(5)
+#define SX9500_CONVDONE_IRQ		BIT(3)
+
+#define SX9500_PROXSTAT_SHIFT		4
+#define SX9500_COMPSTAT_MASK		GENMASK(3, 0)
+
+#define SX9500_NUM_CHANNELS		4
+#define SX9500_CHAN_MASK		GENMASK(SX9500_NUM_CHANNELS - 1, 0)
+
+struct sx9500_data {
+	struct mutex mutex;
+	struct i2c_client *client;
+	struct iio_trigger *trig;
+	struct regmap *regmap;
+	struct gpio_desc *gpiod_rst;
+	/*
+	 * Last reading of the proximity status for each channel.  We
+	 * only send an event to user space when this changes.
+	 */
+	bool prox_stat[SX9500_NUM_CHANNELS];
+	bool event_enabled[SX9500_NUM_CHANNELS];
+	bool trigger_enabled;
+	u16 *buffer;
+	/* Remember enabled channels and sample rate during suspend. */
+	unsigned int suspend_ctrl0;
+	struct completion completion;
+	int data_rdy_users, close_far_users;
+	int channel_users[SX9500_NUM_CHANNELS];
+};
+
+static const struct iio_event_spec sx9500_events[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+#define SX9500_CHANNEL(idx)					\
+	{							\
+		.type = IIO_PROXIMITY,				\
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),	\
+		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+		.indexed = 1,					\
+		.channel = idx,					\
+		.event_spec = sx9500_events,			\
+		.num_event_specs = ARRAY_SIZE(sx9500_events),	\
+		.scan_index = idx,				\
+		.scan_type = {					\
+			.sign = 'u',				\
+			.realbits = 16,				\
+			.storagebits = 16,			\
+			.shift = 0,				\
+		},						\
+	}
+
+static const struct iio_chan_spec sx9500_channels[] = {
+	SX9500_CHANNEL(0),
+	SX9500_CHANNEL(1),
+	SX9500_CHANNEL(2),
+	SX9500_CHANNEL(3),
+	IIO_CHAN_SOFT_TIMESTAMP(4),
+};
+
+static const struct {
+	int val;
+	int val2;
+} sx9500_samp_freq_table[] = {
+	{33, 333333},
+	{16, 666666},
+	{11, 111111},
+	{8, 333333},
+	{6, 666666},
+	{5, 0},
+	{3, 333333},
+	{2, 500000},
+};
+
+static const unsigned int sx9500_scan_period_table[] = {
+	30, 60, 90, 120, 150, 200, 300, 400,
+};
+
+static const struct regmap_range sx9500_writable_reg_ranges[] = {
+	regmap_reg_range(SX9500_REG_IRQ_MSK, SX9500_REG_IRQ_MSK),
+	regmap_reg_range(SX9500_REG_PROX_CTRL0, SX9500_REG_PROX_CTRL8),
+	regmap_reg_range(SX9500_REG_SENSOR_SEL, SX9500_REG_SENSOR_SEL),
+	regmap_reg_range(SX9500_REG_OFFSET_MSB, SX9500_REG_OFFSET_LSB),
+	regmap_reg_range(SX9500_REG_RESET, SX9500_REG_RESET),
+};
+
+static const struct regmap_access_table sx9500_writeable_regs = {
+	.yes_ranges = sx9500_writable_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9500_writable_reg_ranges),
+};
+
+/*
+ * All allocated registers are readable, so we just list unallocated
+ * ones.
+ */
+static const struct regmap_range sx9500_non_readable_reg_ranges[] = {
+	regmap_reg_range(SX9500_REG_STAT + 1, SX9500_REG_STAT + 1),
+	regmap_reg_range(SX9500_REG_IRQ_MSK + 1, SX9500_REG_PROX_CTRL0 - 1),
+	regmap_reg_range(SX9500_REG_PROX_CTRL8 + 1, SX9500_REG_SENSOR_SEL - 1),
+	regmap_reg_range(SX9500_REG_OFFSET_LSB + 1, SX9500_REG_RESET - 1),
+};
+
+static const struct regmap_access_table sx9500_readable_regs = {
+	.no_ranges = sx9500_non_readable_reg_ranges,
+	.n_no_ranges = ARRAY_SIZE(sx9500_non_readable_reg_ranges),
+};
+
+static const struct regmap_range sx9500_volatile_reg_ranges[] = {
+	regmap_reg_range(SX9500_REG_IRQ_SRC, SX9500_REG_STAT),
+	regmap_reg_range(SX9500_REG_USE_MSB, SX9500_REG_OFFSET_LSB),
+	regmap_reg_range(SX9500_REG_RESET, SX9500_REG_RESET),
+};
+
+static const struct regmap_access_table sx9500_volatile_regs = {
+	.yes_ranges = sx9500_volatile_reg_ranges,
+	.n_yes_ranges = ARRAY_SIZE(sx9500_volatile_reg_ranges),
+};
+
+static const struct regmap_config sx9500_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+
+	.max_register = SX9500_REG_RESET,
+	.cache_type = REGCACHE_RBTREE,
+
+	.wr_table = &sx9500_writeable_regs,
+	.rd_table = &sx9500_readable_regs,
+	.volatile_table = &sx9500_volatile_regs,
+};
+
+static int sx9500_inc_users(struct sx9500_data *data, int *counter,
+			    unsigned int reg, unsigned int bitmask)
+{
+	(*counter)++;
+	if (*counter != 1)
+		/* Bit is already active, nothing to do. */
+		return 0;
+
+	return regmap_update_bits(data->regmap, reg, bitmask, bitmask);
+}
+
+static int sx9500_dec_users(struct sx9500_data *data, int *counter,
+			    unsigned int reg, unsigned int bitmask)
+{
+	(*counter)--;
+	if (*counter != 0)
+		/* There are more users, do not deactivate. */
+		return 0;
+
+	return regmap_update_bits(data->regmap, reg, bitmask, 0);
+}
+
+static int sx9500_inc_chan_users(struct sx9500_data *data, int chan)
+{
+	return sx9500_inc_users(data, &data->channel_users[chan],
+				SX9500_REG_PROX_CTRL0, BIT(chan));
+}
+
+static int sx9500_dec_chan_users(struct sx9500_data *data, int chan)
+{
+	return sx9500_dec_users(data, &data->channel_users[chan],
+				SX9500_REG_PROX_CTRL0, BIT(chan));
+}
+
+static int sx9500_inc_data_rdy_users(struct sx9500_data *data)
+{
+	return sx9500_inc_users(data, &data->data_rdy_users,
+				SX9500_REG_IRQ_MSK, SX9500_CONVDONE_IRQ);
+}
+
+static int sx9500_dec_data_rdy_users(struct sx9500_data *data)
+{
+	return sx9500_dec_users(data, &data->data_rdy_users,
+				SX9500_REG_IRQ_MSK, SX9500_CONVDONE_IRQ);
+}
+
+static int sx9500_inc_close_far_users(struct sx9500_data *data)
+{
+	return sx9500_inc_users(data, &data->close_far_users,
+				SX9500_REG_IRQ_MSK,
+				SX9500_CLOSE_IRQ | SX9500_FAR_IRQ);
+}
+
+static int sx9500_dec_close_far_users(struct sx9500_data *data)
+{
+	return sx9500_dec_users(data, &data->close_far_users,
+				SX9500_REG_IRQ_MSK,
+				SX9500_CLOSE_IRQ | SX9500_FAR_IRQ);
+}
+
+static int sx9500_read_prox_data(struct sx9500_data *data,
+				 const struct iio_chan_spec *chan,
+				 int *val)
+{
+	int ret;
+	__be16 regval;
+
+	ret = regmap_write(data->regmap, SX9500_REG_SENSOR_SEL, chan->channel);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_bulk_read(data->regmap, SX9500_REG_USE_MSB, &regval, 2);
+	if (ret < 0)
+		return ret;
+
+	*val = be16_to_cpu(regval);
+
+	return IIO_VAL_INT;
+}
+
+/*
+ * If we have no interrupt support, we have to wait for a scan period
+ * after enabling a channel to get a result.
+ */
+static int sx9500_wait_for_sample(struct sx9500_data *data)
+{
+	int ret;
+	unsigned int val;
+
+	ret = regmap_read(data->regmap, SX9500_REG_PROX_CTRL0, &val);
+	if (ret < 0)
+		return ret;
+
+	val = (val & SX9500_SCAN_PERIOD_MASK) >> SX9500_SCAN_PERIOD_SHIFT;
+
+	msleep(sx9500_scan_period_table[val]);
+
+	return 0;
+}
+
+static int sx9500_read_proximity(struct sx9500_data *data,
+				 const struct iio_chan_spec *chan,
+				 int *val)
+{
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	ret = sx9500_inc_chan_users(data, chan->channel);
+	if (ret < 0)
+		goto out;
+
+	ret = sx9500_inc_data_rdy_users(data);
+	if (ret < 0)
+		goto out_dec_chan;
+
+	mutex_unlock(&data->mutex);
+
+	if (data->client->irq > 0)
+		ret = wait_for_completion_interruptible(&data->completion);
+	else
+		ret = sx9500_wait_for_sample(data);
+
+	mutex_lock(&data->mutex);
+
+	if (ret < 0)
+		goto out_dec_data_rdy;
+
+	ret = sx9500_read_prox_data(data, chan, val);
+	if (ret < 0)
+		goto out_dec_data_rdy;
+
+	ret = sx9500_dec_data_rdy_users(data);
+	if (ret < 0)
+		goto out_dec_chan;
+
+	ret = sx9500_dec_chan_users(data, chan->channel);
+	if (ret < 0)
+		goto out;
+
+	ret = IIO_VAL_INT;
+
+	goto out;
+
+out_dec_data_rdy:
+	sx9500_dec_data_rdy_users(data);
+out_dec_chan:
+	sx9500_dec_chan_users(data, chan->channel);
+out:
+	mutex_unlock(&data->mutex);
+	reinit_completion(&data->completion);
+
+	return ret;
+}
+
+static int sx9500_read_samp_freq(struct sx9500_data *data,
+				 int *val, int *val2)
+{
+	int ret;
+	unsigned int regval;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_read(data->regmap, SX9500_REG_PROX_CTRL0, &regval);
+	mutex_unlock(&data->mutex);
+
+	if (ret < 0)
+		return ret;
+
+	regval = (regval & SX9500_SCAN_PERIOD_MASK) >> SX9500_SCAN_PERIOD_SHIFT;
+	*val = sx9500_samp_freq_table[regval].val;
+	*val2 = sx9500_samp_freq_table[regval].val2;
+
+	return IIO_VAL_INT_PLUS_MICRO;
+}
+
+static int sx9500_read_raw(struct iio_dev *indio_dev,
+			   const struct iio_chan_spec *chan,
+			   int *val, int *val2, long mask)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret;
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		switch (mask) {
+		case IIO_CHAN_INFO_RAW:
+			ret = iio_device_claim_direct_mode(indio_dev);
+			if (ret)
+				return ret;
+			ret = sx9500_read_proximity(data, chan, val);
+			iio_device_release_direct_mode(indio_dev);
+			return ret;
+		case IIO_CHAN_INFO_SAMP_FREQ:
+			return sx9500_read_samp_freq(data, val, val2);
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int sx9500_set_samp_freq(struct sx9500_data *data,
+				int val, int val2)
+{
+	int i, ret;
+
+	for (i = 0; i < ARRAY_SIZE(sx9500_samp_freq_table); i++)
+		if (val == sx9500_samp_freq_table[i].val &&
+		    val2 == sx9500_samp_freq_table[i].val2)
+			break;
+
+	if (i == ARRAY_SIZE(sx9500_samp_freq_table))
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+
+	ret = regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0,
+				 SX9500_SCAN_PERIOD_MASK,
+				 i << SX9500_SCAN_PERIOD_SHIFT);
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9500_write_raw(struct iio_dev *indio_dev,
+			    const struct iio_chan_spec *chan,
+			    int val, int val2, long mask)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		switch (mask) {
+		case IIO_CHAN_INFO_SAMP_FREQ:
+			return sx9500_set_samp_freq(data, val, val2);
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static irqreturn_t sx9500_irq_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct sx9500_data *data = iio_priv(indio_dev);
+
+	if (data->trigger_enabled)
+		iio_trigger_poll(data->trig);
+
+	/*
+	 * Even if no event is enabled, we need to wake the thread to
+	 * clear the interrupt state by reading SX9500_REG_IRQ_SRC.  It
+	 * is not possible to do that here because regmap_read takes a
+	 * mutex.
+	 */
+	return IRQ_WAKE_THREAD;
+}
+
+static void sx9500_push_events(struct iio_dev *indio_dev)
+{
+	int ret;
+	unsigned int val, chan;
+	struct sx9500_data *data = iio_priv(indio_dev);
+
+	ret = regmap_read(data->regmap, SX9500_REG_STAT, &val);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "i2c transfer error in irq\n");
+		return;
+	}
+
+	val >>= SX9500_PROXSTAT_SHIFT;
+	for (chan = 0; chan < SX9500_NUM_CHANNELS; chan++) {
+		int dir;
+		u64 ev;
+		bool new_prox = val & BIT(chan);
+
+		if (!data->event_enabled[chan])
+			continue;
+		if (new_prox == data->prox_stat[chan])
+			/* No change on this channel. */
+			continue;
+
+		dir = new_prox ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
+		ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
+					  IIO_EV_TYPE_THRESH, dir);
+		iio_push_event(indio_dev, ev, iio_get_time_ns(indio_dev));
+		data->prox_stat[chan] = new_prox;
+	}
+}
+
+static irqreturn_t sx9500_irq_thread_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret;
+	unsigned int val;
+
+	mutex_lock(&data->mutex);
+
+	ret = regmap_read(data->regmap, SX9500_REG_IRQ_SRC, &val);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "i2c transfer error in irq\n");
+		goto out;
+	}
+
+	if (val & (SX9500_CLOSE_IRQ | SX9500_FAR_IRQ))
+		sx9500_push_events(indio_dev);
+
+	if (val & SX9500_CONVDONE_IRQ)
+		complete(&data->completion);
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return IRQ_HANDLED;
+}
+
+static int sx9500_read_event_config(struct iio_dev *indio_dev,
+				    const struct iio_chan_spec *chan,
+				    enum iio_event_type type,
+				    enum iio_event_direction dir)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+
+	if (chan->type != IIO_PROXIMITY || type != IIO_EV_TYPE_THRESH ||
+	    dir != IIO_EV_DIR_EITHER)
+		return -EINVAL;
+
+	return data->event_enabled[chan->channel];
+}
+
+static int sx9500_write_event_config(struct iio_dev *indio_dev,
+				     const struct iio_chan_spec *chan,
+				     enum iio_event_type type,
+				     enum iio_event_direction dir,
+				     int state)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (chan->type != IIO_PROXIMITY || type != IIO_EV_TYPE_THRESH ||
+	    dir != IIO_EV_DIR_EITHER)
+		return -EINVAL;
+
+	mutex_lock(&data->mutex);
+
+	if (state == 1) {
+		ret = sx9500_inc_chan_users(data, chan->channel);
+		if (ret < 0)
+			goto out_unlock;
+		ret = sx9500_inc_close_far_users(data);
+		if (ret < 0)
+			goto out_undo_chan;
+	} else {
+		ret = sx9500_dec_chan_users(data, chan->channel);
+		if (ret < 0)
+			goto out_unlock;
+		ret = sx9500_dec_close_far_users(data);
+		if (ret < 0)
+			goto out_undo_chan;
+	}
+
+	data->event_enabled[chan->channel] = state;
+	goto out_unlock;
+
+out_undo_chan:
+	if (state == 1)
+		sx9500_dec_chan_users(data, chan->channel);
+	else
+		sx9500_inc_chan_users(data, chan->channel);
+out_unlock:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static int sx9500_update_scan_mode(struct iio_dev *indio_dev,
+				   const unsigned long *scan_mask)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->mutex);
+	kfree(data->buffer);
+	data->buffer = kzalloc(indio_dev->scan_bytes, GFP_KERNEL);
+	mutex_unlock(&data->mutex);
+
+	if (data->buffer == NULL)
+		return -ENOMEM;
+
+	return 0;
+}
+
+static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
+	"2.500000 3.333333 5 6.666666 8.333333 11.111111 16.666666 33.333333");
+
+static struct attribute *sx9500_attributes[] = {
+	&iio_const_attr_sampling_frequency_available.dev_attr.attr,
+	NULL,
+};
+
+static const struct attribute_group sx9500_attribute_group = {
+	.attrs = sx9500_attributes,
+};
+
+static const struct iio_info sx9500_info = {
+	.attrs = &sx9500_attribute_group,
+	.read_raw = &sx9500_read_raw,
+	.write_raw = &sx9500_write_raw,
+	.read_event_config = &sx9500_read_event_config,
+	.write_event_config = &sx9500_write_event_config,
+	.update_scan_mode = &sx9500_update_scan_mode,
+};
+
+static int sx9500_set_trigger_state(struct iio_trigger *trig,
+				    bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+
+	if (state)
+		ret = sx9500_inc_data_rdy_users(data);
+	else
+		ret = sx9500_dec_data_rdy_users(data);
+	if (ret < 0)
+		goto out;
+
+	data->trigger_enabled = state;
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static const struct iio_trigger_ops sx9500_trigger_ops = {
+	.set_trigger_state = sx9500_set_trigger_state,
+};
+
+static irqreturn_t sx9500_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int val, bit, ret, i = 0;
+
+	mutex_lock(&data->mutex);
+
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		ret = sx9500_read_prox_data(data, &indio_dev->channels[bit],
+					    &val);
+		if (ret < 0)
+			goto out;
+
+		data->buffer[i++] = val;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, data->buffer,
+					   iio_get_time_ns(indio_dev));
+
+out:
+	mutex_unlock(&data->mutex);
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int sx9500_buffer_postenable(struct iio_dev *indio_dev)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret = 0, i;
+
+	mutex_lock(&data->mutex);
+
+	for (i = 0; i < SX9500_NUM_CHANNELS; i++)
+		if (test_bit(i, indio_dev->active_scan_mask)) {
+			ret = sx9500_inc_chan_users(data, i);
+			if (ret)
+				break;
+		}
+
+	if (ret)
+		for (i = i - 1; i >= 0; i--)
+			if (test_bit(i, indio_dev->active_scan_mask))
+				sx9500_dec_chan_users(data, i);
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static int sx9500_buffer_predisable(struct iio_dev *indio_dev)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret = 0, i;
+
+	mutex_lock(&data->mutex);
+
+	for (i = 0; i < SX9500_NUM_CHANNELS; i++)
+		if (test_bit(i, indio_dev->active_scan_mask)) {
+			ret = sx9500_dec_chan_users(data, i);
+			if (ret)
+				break;
+		}
+
+	if (ret)
+		for (i = i - 1; i >= 0; i--)
+			if (test_bit(i, indio_dev->active_scan_mask))
+				sx9500_inc_chan_users(data, i);
+
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static const struct iio_buffer_setup_ops sx9500_buffer_setup_ops = {
+	.postenable = sx9500_buffer_postenable,
+	.predisable = sx9500_buffer_predisable,
+};
+
+struct sx9500_reg_default {
+	u8 reg;
+	u8 def;
+};
+
+static const struct sx9500_reg_default sx9500_default_regs[] = {
+	{
+		.reg = SX9500_REG_PROX_CTRL1,
+		/* Shield enabled, small range. */
+		.def = 0x43,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL2,
+		/* x8 gain, 167kHz frequency, finest resolution. */
+		.def = 0x77,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL3,
+		/* Doze enabled, 2x scan period doze, no raw filter. */
+		.def = 0x40,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL4,
+		/* Average threshold. */
+		.def = 0x30,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL5,
+		/*
+		 * Debouncer off, lowest average negative filter,
+		 * highest average positive filter.
+		 */
+		.def = 0x0f,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL6,
+		/* Proximity detection threshold: 280 */
+		.def = 0x0e,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL7,
+		/*
+		 * No automatic compensation, compensate each pin
+		 * independently, proximity hysteresis: 32, close
+		 * debouncer off, far debouncer off.
+		 */
+		.def = 0x00,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL8,
+		/* No stuck timeout, no periodic compensation. */
+		.def = 0x00,
+	},
+	{
+		.reg = SX9500_REG_PROX_CTRL0,
+		/* Scan period: 30ms, all sensors disabled. */
+		.def = 0x00,
+	},
+};
+
+/* Activate all channels and perform an initial compensation. */
+static int sx9500_init_compensation(struct iio_dev *indio_dev)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int i, ret;
+	unsigned int val;
+
+	ret = regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0,
+				 SX9500_CHAN_MASK, SX9500_CHAN_MASK);
+	if (ret < 0)
+		return ret;
+
+	for (i = 10; i >= 0; i--) {
+		usleep_range(10000, 20000);
+		ret = regmap_read(data->regmap, SX9500_REG_STAT, &val);
+		if (ret < 0)
+			goto out;
+		if (!(val & SX9500_COMPSTAT_MASK))
+			break;
+	}
+
+	if (i < 0) {
+		dev_err(&data->client->dev, "initial compensation timed out");
+		ret = -ETIMEDOUT;
+	}
+
+out:
+	regmap_update_bits(data->regmap, SX9500_REG_PROX_CTRL0,
+			   SX9500_CHAN_MASK, 0);
+	return ret;
+}
+
+static int sx9500_init_device(struct iio_dev *indio_dev)
+{
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret, i;
+	unsigned int val;
+
+	if (data->gpiod_rst) {
+		gpiod_set_value_cansleep(data->gpiod_rst, 0);
+		usleep_range(1000, 2000);
+		gpiod_set_value_cansleep(data->gpiod_rst, 1);
+		usleep_range(1000, 2000);
+	}
+
+	ret = regmap_write(data->regmap, SX9500_REG_IRQ_MSK, 0);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_write(data->regmap, SX9500_REG_RESET,
+			   SX9500_SOFT_RESET);
+	if (ret < 0)
+		return ret;
+
+	ret = regmap_read(data->regmap, SX9500_REG_IRQ_SRC, &val);
+	if (ret < 0)
+		return ret;
+
+	for (i = 0; i < ARRAY_SIZE(sx9500_default_regs); i++) {
+		ret = regmap_write(data->regmap,
+				   sx9500_default_regs[i].reg,
+				   sx9500_default_regs[i].def);
+		if (ret < 0)
+			return ret;
+	}
+
+	return sx9500_init_compensation(indio_dev);
+}
+
+static const struct acpi_gpio_params reset_gpios = { 0, 0, false };
+static const struct acpi_gpio_params interrupt_gpios = { 2, 0, false };
+
+static const struct acpi_gpio_mapping acpi_sx9500_gpios[] = {
+	{ "reset-gpios", &reset_gpios, 1 },
+	/*
+	 * Some platforms have a bug in ACPI GPIO description making IRQ
+	 * GPIO to be output only. Ask the GPIO core to ignore this limit.
+	 */
+	{ "interrupt-gpios", &interrupt_gpios, 1, ACPI_GPIO_QUIRK_NO_IO_RESTRICTION },
+	{ },
+};
+
+static void sx9500_gpio_probe(struct i2c_client *client,
+			      struct sx9500_data *data)
+{
+	struct gpio_desc *gpiod_int;
+	struct device *dev;
+	int ret;
+
+	if (!client)
+		return;
+
+	dev = &client->dev;
+
+	ret = devm_acpi_dev_add_driver_gpios(dev, acpi_sx9500_gpios);
+	if (ret)
+		dev_dbg(dev, "Unable to add GPIO mapping table\n");
+
+	if (client->irq <= 0) {
+		gpiod_int = devm_gpiod_get(dev, "interrupt", GPIOD_IN);
+		if (IS_ERR(gpiod_int))
+			dev_err(dev, "gpio get irq failed\n");
+		else
+			client->irq = gpiod_to_irq(gpiod_int);
+	}
+
+	data->gpiod_rst = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(data->gpiod_rst)) {
+		dev_warn(dev, "gpio get reset pin failed\n");
+		data->gpiod_rst = NULL;
+	}
+}
+
+static int sx9500_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	int ret;
+	struct iio_dev *indio_dev;
+	struct sx9500_data *data;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (indio_dev == NULL)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	mutex_init(&data->mutex);
+	init_completion(&data->completion);
+	data->trigger_enabled = false;
+
+	data->regmap = devm_regmap_init_i2c(client, &sx9500_regmap_config);
+	if (IS_ERR(data->regmap))
+		return PTR_ERR(data->regmap);
+
+	indio_dev->name = SX9500_DRIVER_NAME;
+	indio_dev->channels = sx9500_channels;
+	indio_dev->num_channels = ARRAY_SIZE(sx9500_channels);
+	indio_dev->info = &sx9500_info;
+	indio_dev->modes = INDIO_DIRECT_MODE;
+	i2c_set_clientdata(client, indio_dev);
+
+	sx9500_gpio_probe(client, data);
+
+	ret = sx9500_init_device(indio_dev);
+	if (ret < 0)
+		return ret;
+
+	if (client->irq <= 0)
+		dev_warn(&client->dev, "no valid irq found\n");
+	else {
+		ret = devm_request_threaded_irq(&client->dev, client->irq,
+				sx9500_irq_handler, sx9500_irq_thread_handler,
+				IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				SX9500_IRQ_NAME, indio_dev);
+		if (ret < 0)
+			return ret;
+
+		data->trig = devm_iio_trigger_alloc(&client->dev,
+				"%s-dev%d", indio_dev->name, iio_device_id(indio_dev));
+		if (!data->trig)
+			return -ENOMEM;
+
+		data->trig->ops = &sx9500_trigger_ops;
+		iio_trigger_set_drvdata(data->trig, indio_dev);
+
+		ret = iio_trigger_register(data->trig);
+		if (ret)
+			return ret;
+	}
+
+	ret = iio_triggered_buffer_setup(indio_dev, NULL,
+					 sx9500_trigger_handler,
+					 &sx9500_buffer_setup_ops);
+	if (ret < 0)
+		goto out_trigger_unregister;
+
+	ret = iio_device_register(indio_dev);
+	if (ret < 0)
+		goto out_buffer_cleanup;
+
+	return 0;
+
+out_buffer_cleanup:
+	iio_triggered_buffer_cleanup(indio_dev);
+out_trigger_unregister:
+	if (client->irq > 0)
+		iio_trigger_unregister(data->trig);
+
+	return ret;
+}
+
+static void sx9500_remove(struct i2c_client *client)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(client);
+	struct sx9500_data *data = iio_priv(indio_dev);
+
+	iio_device_unregister(indio_dev);
+	iio_triggered_buffer_cleanup(indio_dev);
+	if (client->irq > 0)
+		iio_trigger_unregister(data->trig);
+	kfree(data->buffer);
+}
+
+static int sx9500_suspend(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_read(data->regmap, SX9500_REG_PROX_CTRL0,
+			  &data->suspend_ctrl0);
+	if (ret < 0)
+		goto out;
+
+	/*
+	 * Scan period doesn't matter because when all the sensors are
+	 * deactivated the device is in sleep mode.
+	 */
+	ret = regmap_write(data->regmap, SX9500_REG_PROX_CTRL0, 0);
+
+out:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static int sx9500_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
+	struct sx9500_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = regmap_write(data->regmap, SX9500_REG_PROX_CTRL0,
+			   data->suspend_ctrl0);
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(sx9500_pm_ops, sx9500_suspend, sx9500_resume);
+
+static const struct acpi_device_id sx9500_acpi_match[] = {
+	{"SSX9500", 0},
+	{"SASX9500", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(acpi, sx9500_acpi_match);
+
+static const struct of_device_id sx9500_of_match[] = {
+	{ .compatible = "semtech,sx9500", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, sx9500_of_match);
+
+static const struct i2c_device_id sx9500_id[] = {
+	{"sx9500", 0},
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sx9500_id);
+
+static struct i2c_driver sx9500_driver = {
+	.driver = {
+		.name	= SX9500_DRIVER_NAME,
+		.acpi_match_table = ACPI_PTR(sx9500_acpi_match),
+		.of_match_table = of_match_ptr(sx9500_of_match),
+		.pm = pm_sleep_ptr(&sx9500_pm_ops),
+	},
+	.probe		= sx9500_probe,
+	.remove		= sx9500_remove,
+	.id_table	= sx9500_id,
+};
+module_i2c_driver(sx9500_driver);
+
+MODULE_AUTHOR("Vlad Dogaru <vlad.dogaru@intel.com>");
+MODULE_DESCRIPTION("Driver for Semtech SX9500 proximity sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/proximity/sx_common.c b/drivers/iio/proximity/sx_common.c
new file mode 100644
index 000000000..d70a6b4f0
--- /dev/null
+++ b/drivers/iio/proximity/sx_common.c
@@ -0,0 +1,569 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2021 Google LLC.
+ *
+ * Common part of most Semtech SAR sensor.
+ */
+
+#include <linux/bitops.h>
+#include <linux/byteorder/generic.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/interrupt.h>
+#include <linux/irqreturn.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <vdso/bits.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/events.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+
+#include "sx_common.h"
+
+/* All Semtech SAR sensors have IRQ bit in the same order. */
+#define   SX_COMMON_CONVDONE_IRQ			BIT(0)
+#define   SX_COMMON_FAR_IRQ				BIT(2)
+#define   SX_COMMON_CLOSE_IRQ				BIT(3)
+
+const struct iio_event_spec sx_common_events[3] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_shared_by_all = BIT(IIO_EV_INFO_PERIOD),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_shared_by_all = BIT(IIO_EV_INFO_PERIOD),
+	},
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE) |
+				 BIT(IIO_EV_INFO_HYSTERESIS) |
+				 BIT(IIO_EV_INFO_VALUE),
+	},
+};
+EXPORT_SYMBOL_NS_GPL(sx_common_events, SEMTECH_PROX);
+
+static irqreturn_t sx_common_irq_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	if (data->trigger_enabled)
+		iio_trigger_poll(data->trig);
+
+	/*
+	 * Even if no event is enabled, we need to wake the thread to clear the
+	 * interrupt state by reading SX_COMMON_REG_IRQ_SRC.
+	 * It is not possible to do that here because regmap_read takes a mutex.
+	 */
+	return IRQ_WAKE_THREAD;
+}
+
+static void sx_common_push_events(struct iio_dev *indio_dev)
+{
+	int ret;
+	unsigned int val, chan;
+	struct sx_common_data *data = iio_priv(indio_dev);
+	s64 timestamp = iio_get_time_ns(indio_dev);
+	unsigned long prox_changed;
+
+	/* Read proximity state on all channels */
+	ret = regmap_read(data->regmap, data->chip_info->reg_stat, &val);
+	if (ret) {
+		dev_err(&data->client->dev, "i2c transfer error in irq\n");
+		return;
+	}
+
+	val >>= data->chip_info->stat_offset;
+
+	/*
+	 * Only iterate over channels with changes on proximity status that have
+	 * events enabled.
+	 */
+	prox_changed = (data->chan_prox_stat ^ val) & data->chan_event;
+
+	for_each_set_bit(chan, &prox_changed, data->chip_info->num_channels) {
+		int dir;
+		u64 ev;
+
+		dir = (val & BIT(chan)) ? IIO_EV_DIR_FALLING : IIO_EV_DIR_RISING;
+		ev = IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, chan,
+					  IIO_EV_TYPE_THRESH, dir);
+
+		iio_push_event(indio_dev, ev, timestamp);
+	}
+	data->chan_prox_stat = val;
+}
+
+static int sx_common_enable_irq(struct sx_common_data *data, unsigned int irq)
+{
+	if (!data->client->irq)
+		return 0;
+	return regmap_update_bits(data->regmap, data->chip_info->reg_irq_msk,
+				  irq << data->chip_info->irq_msk_offset,
+				  irq << data->chip_info->irq_msk_offset);
+}
+
+static int sx_common_disable_irq(struct sx_common_data *data, unsigned int irq)
+{
+	if (!data->client->irq)
+		return 0;
+	return regmap_update_bits(data->regmap, data->chip_info->reg_irq_msk,
+				  irq << data->chip_info->irq_msk_offset, 0);
+}
+
+static int sx_common_update_chan_en(struct sx_common_data *data,
+				    unsigned long chan_read,
+				    unsigned long chan_event)
+{
+	int ret;
+	unsigned long channels = chan_read | chan_event;
+
+	if ((data->chan_read | data->chan_event) != channels) {
+		ret = regmap_update_bits(data->regmap,
+					 data->chip_info->reg_enable_chan,
+					 data->chip_info->mask_enable_chan,
+					 channels);
+		if (ret)
+			return ret;
+	}
+	data->chan_read = chan_read;
+	data->chan_event = chan_event;
+	return 0;
+}
+
+static int sx_common_get_read_channel(struct sx_common_data *data, int channel)
+{
+	return sx_common_update_chan_en(data, data->chan_read | BIT(channel),
+				     data->chan_event);
+}
+
+static int sx_common_put_read_channel(struct sx_common_data *data, int channel)
+{
+	return sx_common_update_chan_en(data, data->chan_read & ~BIT(channel),
+				     data->chan_event);
+}
+
+static int sx_common_get_event_channel(struct sx_common_data *data, int channel)
+{
+	return sx_common_update_chan_en(data, data->chan_read,
+				     data->chan_event | BIT(channel));
+}
+
+static int sx_common_put_event_channel(struct sx_common_data *data, int channel)
+{
+	return sx_common_update_chan_en(data, data->chan_read,
+				     data->chan_event & ~BIT(channel));
+}
+
+/**
+ * sx_common_read_proximity() - Read raw proximity value.
+ * @data:	Internal data
+ * @chan:	Channel to read
+ * @val:	pointer to return read value.
+ *
+ * Request a conversion, wait for the sensor to be ready and
+ * return the raw proximity value.
+ */
+int sx_common_read_proximity(struct sx_common_data *data,
+			     const struct iio_chan_spec *chan, int *val)
+{
+	int ret;
+	__be16 rawval;
+
+	mutex_lock(&data->mutex);
+
+	ret = sx_common_get_read_channel(data, chan->channel);
+	if (ret)
+		goto out;
+
+	ret = sx_common_enable_irq(data, SX_COMMON_CONVDONE_IRQ);
+	if (ret)
+		goto out_put_channel;
+
+	mutex_unlock(&data->mutex);
+
+	if (data->client->irq) {
+		ret = wait_for_completion_interruptible(&data->completion);
+		reinit_completion(&data->completion);
+	} else {
+		ret = data->chip_info->ops.wait_for_sample(data);
+	}
+
+	mutex_lock(&data->mutex);
+
+	if (ret)
+		goto out_disable_irq;
+
+	ret = data->chip_info->ops.read_prox_data(data, chan, &rawval);
+	if (ret)
+		goto out_disable_irq;
+
+	*val = sign_extend32(be16_to_cpu(rawval), chan->scan_type.realbits - 1);
+
+	ret = sx_common_disable_irq(data, SX_COMMON_CONVDONE_IRQ);
+	if (ret)
+		goto out_put_channel;
+
+	ret = sx_common_put_read_channel(data, chan->channel);
+	if (ret)
+		goto out;
+
+	mutex_unlock(&data->mutex);
+
+	return IIO_VAL_INT;
+
+out_disable_irq:
+	sx_common_disable_irq(data, SX_COMMON_CONVDONE_IRQ);
+out_put_channel:
+	sx_common_put_read_channel(data, chan->channel);
+out:
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_NS_GPL(sx_common_read_proximity, SEMTECH_PROX);
+
+/**
+ * sx_common_read_event_config() - Configure event setting.
+ * @indio_dev:	iio device object
+ * @chan:	Channel to read
+ * @type:	Type of event (unused)
+ * @dir:	Direction of event (unused)
+ *
+ * return if the given channel is used for event gathering.
+ */
+int sx_common_read_event_config(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+
+	return !!(data->chan_event & BIT(chan->channel));
+}
+EXPORT_SYMBOL_NS_GPL(sx_common_read_event_config, SEMTECH_PROX);
+
+/**
+ * sx_common_write_event_config() - Configure event setting.
+ * @indio_dev:	iio device object
+ * @chan:	Channel to enable
+ * @type:	Type of event (unused)
+ * @dir:	Direction of event (unused)
+ * @state:	State of the event.
+ *
+ * Enable/Disable event on a given channel.
+ */
+int sx_common_write_event_config(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir, int state)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	unsigned int eventirq = SX_COMMON_FAR_IRQ | SX_COMMON_CLOSE_IRQ;
+	int ret;
+
+	/* If the state hasn't changed, there's nothing to do. */
+	if (!!(data->chan_event & BIT(chan->channel)) == state)
+		return 0;
+
+	mutex_lock(&data->mutex);
+	if (state) {
+		ret = sx_common_get_event_channel(data, chan->channel);
+		if (ret)
+			goto out_unlock;
+		if (!(data->chan_event & ~BIT(chan->channel))) {
+			ret = sx_common_enable_irq(data, eventirq);
+			if (ret)
+				sx_common_put_event_channel(data, chan->channel);
+		}
+	} else {
+		ret = sx_common_put_event_channel(data, chan->channel);
+		if (ret)
+			goto out_unlock;
+		if (!data->chan_event) {
+			ret = sx_common_disable_irq(data, eventirq);
+			if (ret)
+				sx_common_get_event_channel(data, chan->channel);
+		}
+	}
+
+out_unlock:
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+EXPORT_SYMBOL_NS_GPL(sx_common_write_event_config, SEMTECH_PROX);
+
+static int sx_common_set_trigger_state(struct iio_trigger *trig, bool state)
+{
+	struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+	struct sx_common_data *data = iio_priv(indio_dev);
+	int ret = 0;
+
+	mutex_lock(&data->mutex);
+
+	if (state)
+		ret = sx_common_enable_irq(data, SX_COMMON_CONVDONE_IRQ);
+	else if (!data->chan_read)
+		ret = sx_common_disable_irq(data, SX_COMMON_CONVDONE_IRQ);
+	if (ret)
+		goto out;
+
+	data->trigger_enabled = state;
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return ret;
+}
+
+static const struct iio_trigger_ops sx_common_trigger_ops = {
+	.set_trigger_state = sx_common_set_trigger_state,
+};
+
+static irqreturn_t sx_common_irq_thread_handler(int irq, void *private)
+{
+	struct iio_dev *indio_dev = private;
+	struct sx_common_data *data = iio_priv(indio_dev);
+	int ret;
+	unsigned int val;
+
+	mutex_lock(&data->mutex);
+
+	ret = regmap_read(data->regmap, SX_COMMON_REG_IRQ_SRC, &val);
+	if (ret) {
+		dev_err(&data->client->dev, "i2c transfer error in irq\n");
+		goto out;
+	}
+
+	if (val & ((SX_COMMON_FAR_IRQ | SX_COMMON_CLOSE_IRQ) << data->chip_info->irq_msk_offset))
+		sx_common_push_events(indio_dev);
+
+	if (val & (SX_COMMON_CONVDONE_IRQ << data->chip_info->irq_msk_offset))
+		complete(&data->completion);
+
+out:
+	mutex_unlock(&data->mutex);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t sx_common_trigger_handler(int irq, void *private)
+{
+	struct iio_poll_func *pf = private;
+	struct iio_dev *indio_dev = pf->indio_dev;
+	struct sx_common_data *data = iio_priv(indio_dev);
+	__be16 val;
+	int bit, ret, i = 0;
+
+	mutex_lock(&data->mutex);
+
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 indio_dev->masklength) {
+		ret = data->chip_info->ops.read_prox_data(data,
+						     &indio_dev->channels[bit],
+						     &val);
+		if (ret)
+			goto out;
+
+		data->buffer.channels[i++] = val;
+	}
+
+	iio_push_to_buffers_with_timestamp(indio_dev, &data->buffer,
+					   pf->timestamp);
+
+out:
+	mutex_unlock(&data->mutex);
+
+	iio_trigger_notify_done(indio_dev->trig);
+
+	return IRQ_HANDLED;
+}
+
+static int sx_common_buffer_preenable(struct iio_dev *indio_dev)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	unsigned long channels = 0;
+	int bit, ret;
+
+	mutex_lock(&data->mutex);
+	for_each_set_bit(bit, indio_dev->active_scan_mask,
+			 indio_dev->masklength)
+		__set_bit(indio_dev->channels[bit].channel, &channels);
+
+	ret = sx_common_update_chan_en(data, channels, data->chan_event);
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static int sx_common_buffer_postdisable(struct iio_dev *indio_dev)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	int ret;
+
+	mutex_lock(&data->mutex);
+	ret = sx_common_update_chan_en(data, 0, data->chan_event);
+	mutex_unlock(&data->mutex);
+	return ret;
+}
+
+static const struct iio_buffer_setup_ops sx_common_buffer_setup_ops = {
+	.preenable = sx_common_buffer_preenable,
+	.postdisable = sx_common_buffer_postdisable,
+};
+
+static void sx_common_regulator_disable(void *_data)
+{
+	struct sx_common_data *data = _data;
+
+	regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
+}
+
+#define SX_COMMON_SOFT_RESET				0xde
+
+static int sx_common_init_device(struct device *dev, struct iio_dev *indio_dev)
+{
+	struct sx_common_data *data = iio_priv(indio_dev);
+	struct sx_common_reg_default tmp;
+	const struct sx_common_reg_default *initval;
+	int ret;
+	unsigned int i, val;
+
+	ret = regmap_write(data->regmap, data->chip_info->reg_reset,
+			   SX_COMMON_SOFT_RESET);
+	if (ret)
+		return ret;
+
+	usleep_range(1000, 2000); /* power-up time is ~1ms. */
+
+	/* Clear reset interrupt state by reading SX_COMMON_REG_IRQ_SRC. */
+	ret = regmap_read(data->regmap, SX_COMMON_REG_IRQ_SRC, &val);
+	if (ret)
+		return ret;
+
+	/* Program defaults from constant or BIOS. */
+	for (i = 0; i < data->chip_info->num_default_regs; i++) {
+		initval = data->chip_info->ops.get_default_reg(dev, i, &tmp);
+		ret = regmap_write(data->regmap, initval->reg, initval->def);
+		if (ret)
+			return ret;
+	}
+
+	return data->chip_info->ops.init_compensation(indio_dev);
+}
+
+/**
+ * sx_common_probe() - Common setup for Semtech SAR sensor
+ * @client:		I2C client object
+ * @chip_info:		Semtech sensor chip information.
+ * @regmap_config:	Sensor registers map configuration.
+ */
+int sx_common_probe(struct i2c_client *client,
+		    const struct sx_common_chip_info *chip_info,
+		    const struct regmap_config *regmap_config)
+{
+	struct device *dev = &client->dev;
+	struct iio_dev *indio_dev;
+	struct sx_common_data *data;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+
+	data->chip_info = chip_info;
+	data->client = client;
+	data->supplies[0].supply = "vdd";
+	data->supplies[1].supply = "svdd";
+	mutex_init(&data->mutex);
+	init_completion(&data->completion);
+
+	data->regmap = devm_regmap_init_i2c(client, regmap_config);
+	if (IS_ERR(data->regmap))
+		return dev_err_probe(dev, PTR_ERR(data->regmap),
+				     "Could init register map\n");
+
+	ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(data->supplies),
+				      data->supplies);
+	if (ret)
+		return dev_err_probe(dev, ret, "Unable to get regulators\n");
+
+	ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies);
+	if (ret)
+		return dev_err_probe(dev, ret, "Unable to enable regulators\n");
+
+	/* Must wait for Tpor time after initial power up */
+	usleep_range(1000, 1100);
+
+	ret = devm_add_action_or_reset(dev, sx_common_regulator_disable, data);
+	if (ret)
+		return dev_err_probe(dev, ret,
+				     "Unable to register regulators deleter\n");
+
+	ret = data->chip_info->ops.check_whoami(dev, indio_dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "error reading WHOAMI\n");
+
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	indio_dev->channels =  data->chip_info->iio_channels;
+	indio_dev->num_channels = data->chip_info->num_iio_channels;
+	indio_dev->info = &data->chip_info->iio_info;
+
+	i2c_set_clientdata(client, indio_dev);
+
+	ret = sx_common_init_device(dev, indio_dev);
+	if (ret)
+		return dev_err_probe(dev, ret, "Unable to initialize sensor\n");
+
+	if (client->irq) {
+		ret = devm_request_threaded_irq(dev, client->irq,
+						sx_common_irq_handler,
+						sx_common_irq_thread_handler,
+						IRQF_ONESHOT,
+						"sx_event", indio_dev);
+		if (ret)
+			return dev_err_probe(dev, ret, "No IRQ\n");
+
+		data->trig = devm_iio_trigger_alloc(dev, "%s-dev%d",
+						    indio_dev->name,
+						    iio_device_id(indio_dev));
+		if (!data->trig)
+			return -ENOMEM;
+
+		data->trig->ops = &sx_common_trigger_ops;
+		iio_trigger_set_drvdata(data->trig, indio_dev);
+
+		ret = devm_iio_trigger_register(dev, data->trig);
+		if (ret)
+			return ret;
+	}
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+					      iio_pollfunc_store_time,
+					      sx_common_trigger_handler,
+					      &sx_common_buffer_setup_ops);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_NS_GPL(sx_common_probe, SEMTECH_PROX);
+
+MODULE_AUTHOR("Gwendal Grignou <gwendal@chromium.org>");
+MODULE_DESCRIPTION("Common functions and structures for Semtech sensor");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/iio/proximity/sx_common.h b/drivers/iio/proximity/sx_common.h
new file mode 100644
index 000000000..5d3edeb75
--- /dev/null
+++ b/drivers/iio/proximity/sx_common.h
@@ -0,0 +1,157 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2021 Google LLC.
+ *
+ * Code shared between most Semtech SAR sensor driver.
+ */
+
+#ifndef IIO_SX_COMMON_H
+#define IIO_SX_COMMON_H
+
+#include <linux/iio/iio.h>
+#include <linux/iio/types.h>
+#include <linux/regulator/consumer.h>
+#include <linux/types.h>
+
+struct device;
+struct i2c_client;
+struct regmap_config;
+struct sx_common_data;
+
+#define SX_COMMON_REG_IRQ_SRC				0x00
+
+#define SX_COMMON_MAX_NUM_CHANNELS	4
+static_assert(SX_COMMON_MAX_NUM_CHANNELS < BITS_PER_LONG);
+
+struct sx_common_reg_default {
+	u8 reg;
+	u8 def;
+};
+
+/**
+ * struct sx_common_ops: function pointers needed by common code
+ *
+ * List functions needed by common code to gather information or configure
+ * the sensor.
+ *
+ * @read_prox_data:	Function to read raw proximity data.
+ * @check_whoami:	Set device name based on whoami register.
+ * @init_compensation:	Function to set initial compensation.
+ * @wait_for_sample:	When there are no physical IRQ, function to wait for a
+ *			sample to be ready.
+ * @get_default_reg:	Populate the initial value for a given register.
+ */
+struct sx_common_ops {
+	int (*read_prox_data)(struct sx_common_data *data,
+			      const struct iio_chan_spec *chan, __be16 *val);
+	int (*check_whoami)(struct device *dev, struct iio_dev *indio_dev);
+	int (*init_compensation)(struct iio_dev *indio_dev);
+	int (*wait_for_sample)(struct sx_common_data *data);
+	const struct sx_common_reg_default  *
+		(*get_default_reg)(struct device *dev, int idx,
+				   struct sx_common_reg_default *reg_def);
+};
+
+/**
+ * struct sx_common_chip_info: Semtech Sensor private chip information
+ *
+ * @reg_stat:		Main status register address.
+ * @reg_irq_msk:	IRQ mask register address.
+ * @reg_enable_chan:	Address to enable/disable channels.
+ *			Each phase presented by the sensor is an IIO channel..
+ * @reg_reset:		Reset register address.
+ * @mask_enable_chan:	Mask over the channels bits in the enable channel
+ *			register.
+ * @stat_offset:	Offset to check phase status.
+ * @irq_msk_offset:	Offset to enable interrupt in the IRQ mask
+ *			register.
+ * @num_channels:	Number of channels.
+ * @num_default_regs:	Number of internal registers that can be configured.
+ *
+ * @ops:		Private functions pointers.
+ * @iio_channels:	Description of exposed iio channels.
+ * @num_iio_channels:	Number of iio_channels.
+ * @iio_info:		iio_info structure for this driver.
+ */
+struct sx_common_chip_info {
+	unsigned int reg_stat;
+	unsigned int reg_irq_msk;
+	unsigned int reg_enable_chan;
+	unsigned int reg_reset;
+
+	unsigned int mask_enable_chan;
+	unsigned int stat_offset;
+	unsigned int irq_msk_offset;
+	unsigned int num_channels;
+	int num_default_regs;
+
+	struct sx_common_ops ops;
+
+	const struct iio_chan_spec *iio_channels;
+	int num_iio_channels;
+	struct iio_info iio_info;
+};
+
+/**
+ * struct sx_common_data: Semtech Sensor private data structure.
+ *
+ * @chip_info:		Structure defining sensor internals.
+ * @mutex:		Serialize access to registers and channel configuration.
+ * @completion:		completion object to wait for data acquisition.
+ * @client:		I2C client structure.
+ * @trig:		IIO trigger object.
+ * @regmap:		Register map.
+ * @num_default_regs:	Number of default registers to set at init.
+ * @supplies:		Power supplies object.
+ * @chan_prox_stat:	Last reading of the proximity status for each channel.
+ *			We only send an event to user space when this changes.
+ * @trigger_enabled:	True when the device trigger is enabled.
+ * @buffer:		Buffer to store raw samples.
+ * @suspend_ctrl:	Remember enabled channels and sample rate during suspend.
+ * @chan_read:		Bit field for each raw channel enabled.
+ * @chan_event:		Bit field for each event enabled.
+ */
+struct sx_common_data {
+	const struct sx_common_chip_info *chip_info;
+
+	struct mutex mutex;
+	struct completion completion;
+	struct i2c_client *client;
+	struct iio_trigger *trig;
+	struct regmap *regmap;
+
+	struct regulator_bulk_data supplies[2];
+	unsigned long chan_prox_stat;
+	bool trigger_enabled;
+
+	/* Ensure correct alignment of timestamp when present. */
+	struct {
+		__be16 channels[SX_COMMON_MAX_NUM_CHANNELS];
+		s64 ts __aligned(8);
+	} buffer;
+
+	unsigned int suspend_ctrl;
+	unsigned long chan_read;
+	unsigned long chan_event;
+};
+
+int sx_common_read_proximity(struct sx_common_data *data,
+			     const struct iio_chan_spec *chan, int *val);
+
+int sx_common_read_event_config(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir);
+int sx_common_write_event_config(struct iio_dev *indio_dev,
+				 const struct iio_chan_spec *chan,
+				 enum iio_event_type type,
+				 enum iio_event_direction dir, int state);
+
+int sx_common_probe(struct i2c_client *client,
+		    const struct sx_common_chip_info *chip_info,
+		    const struct regmap_config *regmap_config);
+
+/* 3 is the number of events defined by a single phase. */
+extern const struct iio_event_spec sx_common_events[3];
+
+#endif  /* IIO_SX_COMMON_H */
diff --git a/drivers/iio/proximity/vcnl3020.c b/drivers/iio/proximity/vcnl3020.c
new file mode 100644
index 000000000..cbc8400c7
--- /dev/null
+++ b/drivers/iio/proximity/vcnl3020.c
@@ -0,0 +1,671 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Support for Vishay VCNL3020 proximity sensor on i2c bus.
+ * Based on Vishay VCNL4000 driver code.
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/interrupt.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/events.h>
+
+#define VCNL3020_PROD_ID	0x21
+
+#define VCNL_COMMAND		0x80 /* Command register */
+#define VCNL_PROD_REV		0x81 /* Product ID and Revision ID */
+#define VCNL_PROXIMITY_RATE	0x82 /* Rate of Proximity Measurement */
+#define VCNL_LED_CURRENT	0x83 /* IR LED current for proximity mode */
+#define VCNL_PS_RESULT_HI	0x87 /* Proximity result register, MSB */
+#define VCNL_PS_RESULT_LO	0x88 /* Proximity result register, LSB */
+#define VCNL_PS_ICR		0x89 /* Interrupt Control Register */
+#define VCNL_PS_LO_THR_HI	0x8a /* High byte of low threshold value */
+#define VCNL_PS_LO_THR_LO	0x8b /* Low byte of low threshold value */
+#define VCNL_PS_HI_THR_HI	0x8c /* High byte of high threshold value */
+#define VCNL_PS_HI_THR_LO	0x8d /* Low byte of high threshold value */
+#define VCNL_ISR		0x8e /* Interrupt Status Register */
+#define VCNL_PS_MOD_ADJ		0x8f /* Proximity Modulator Timing Adjustment */
+
+/* Bit masks for COMMAND register */
+#define VCNL_PS_RDY		BIT(5) /* proximity data ready? */
+#define VCNL_PS_OD		BIT(3) /* start on-demand proximity
+					* measurement
+					*/
+
+/* Enables periodic proximity measurement */
+#define VCNL_PS_EN		BIT(1)
+
+/* Enables state machine and LP oscillator for self timed  measurements */
+#define VCNL_PS_SELFTIMED_EN	BIT(0)
+
+/* Bit masks for ICR */
+
+/* Enable interrupts on low or high thresholds */
+#define  VCNL_ICR_THRES_EN	BIT(1)
+
+/* Bit masks for ISR */
+#define VCNL_INT_TH_HI		BIT(0)	/* High threshold hit */
+#define VCNL_INT_TH_LOW		BIT(1)	/* Low threshold hit */
+
+#define VCNL_ON_DEMAND_TIMEOUT_US	100000
+#define VCNL_POLL_US			20000
+
+static const int vcnl3020_prox_sampling_frequency[][2] = {
+	{1, 950000},
+	{3, 906250},
+	{7, 812500},
+	{16, 625000},
+	{31, 250000},
+	{62, 500000},
+	{125, 0},
+	{250, 0},
+};
+
+/**
+ * struct vcnl3020_data - vcnl3020 specific data.
+ * @regmap:	device register map.
+ * @dev:	vcnl3020 device.
+ * @rev:	revision id.
+ * @lock:	lock for protecting access to device hardware registers.
+ * @buf:	__be16 buffer.
+ */
+struct vcnl3020_data {
+	struct regmap *regmap;
+	struct device *dev;
+	u8 rev;
+	struct mutex lock;
+	__be16 buf;
+};
+
+/**
+ * struct vcnl3020_property - vcnl3020 property.
+ * @name:	property name.
+ * @reg:	i2c register offset.
+ * @conversion_func:	conversion function.
+ */
+struct vcnl3020_property {
+	const char *name;
+	u32 reg;
+	u32 (*conversion_func)(u32 *val);
+};
+
+static u32 microamp_to_reg(u32 *val)
+{
+	/*
+	 * An example of conversion from uA to reg val:
+	 * 200000 uA == 200 mA == 20
+	 */
+	return *val /= 10000;
+};
+
+static struct vcnl3020_property vcnl3020_led_current_property = {
+	.name = "vishay,led-current-microamp",
+	.reg = VCNL_LED_CURRENT,
+	.conversion_func = microamp_to_reg,
+};
+
+static int vcnl3020_get_and_apply_property(struct vcnl3020_data *data,
+					   struct vcnl3020_property prop)
+{
+	int rc;
+	u32 val;
+
+	rc = device_property_read_u32(data->dev, prop.name, &val);
+	if (rc)
+		return 0;
+
+	if (prop.conversion_func)
+		prop.conversion_func(&val);
+
+	rc = regmap_write(data->regmap, prop.reg, val);
+	if (rc) {
+		dev_err(data->dev, "Error (%d) setting property (%s)\n",
+			rc, prop.name);
+	}
+
+	return rc;
+}
+
+static int vcnl3020_init(struct vcnl3020_data *data)
+{
+	int rc;
+	unsigned int reg;
+
+	rc = regmap_read(data->regmap, VCNL_PROD_REV, &reg);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) reading product revision\n", rc);
+		return rc;
+	}
+
+	if (reg != VCNL3020_PROD_ID) {
+		dev_err(data->dev,
+			"Product id (%x) did not match vcnl3020 (%x)\n", reg,
+			VCNL3020_PROD_ID);
+		return -ENODEV;
+	}
+
+	data->rev = reg;
+	mutex_init(&data->lock);
+
+	return vcnl3020_get_and_apply_property(data,
+					       vcnl3020_led_current_property);
+};
+
+static bool vcnl3020_is_in_periodic_mode(struct vcnl3020_data *data)
+{
+	int rc;
+	unsigned int cmd;
+
+	rc = regmap_read(data->regmap, VCNL_COMMAND, &cmd);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) reading command register\n", rc);
+		return false;
+	}
+
+	return !!(cmd & VCNL_PS_SELFTIMED_EN);
+}
+
+static int vcnl3020_measure_proximity(struct vcnl3020_data *data, int *val)
+{
+	int rc;
+	unsigned int reg;
+
+	mutex_lock(&data->lock);
+
+	/* Protect against event capture. */
+	if (vcnl3020_is_in_periodic_mode(data)) {
+		rc = -EBUSY;
+		goto err_unlock;
+	}
+
+	rc = regmap_write(data->regmap, VCNL_COMMAND, VCNL_PS_OD);
+	if (rc)
+		goto err_unlock;
+
+	/* wait for data to become ready */
+	rc = regmap_read_poll_timeout(data->regmap, VCNL_COMMAND, reg,
+				      reg & VCNL_PS_RDY, VCNL_POLL_US,
+				      VCNL_ON_DEMAND_TIMEOUT_US);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) reading vcnl3020 command register\n", rc);
+		goto err_unlock;
+	}
+
+	/* high & low result bytes read */
+	rc = regmap_bulk_read(data->regmap, VCNL_PS_RESULT_HI, &data->buf,
+			      sizeof(data->buf));
+	if (rc)
+		goto err_unlock;
+
+	*val = be16_to_cpu(data->buf);
+
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return rc;
+}
+
+static int vcnl3020_read_proxy_samp_freq(struct vcnl3020_data *data, int *val,
+					 int *val2)
+{
+	int rc;
+	unsigned int prox_rate;
+
+	rc = regmap_read(data->regmap, VCNL_PROXIMITY_RATE, &prox_rate);
+	if (rc)
+		return rc;
+
+	if (prox_rate >= ARRAY_SIZE(vcnl3020_prox_sampling_frequency))
+		return -EINVAL;
+
+	*val = vcnl3020_prox_sampling_frequency[prox_rate][0];
+	*val2 = vcnl3020_prox_sampling_frequency[prox_rate][1];
+
+	return 0;
+}
+
+static int vcnl3020_write_proxy_samp_freq(struct vcnl3020_data *data, int val,
+					  int val2)
+{
+	unsigned int i;
+	int index = -1;
+	int rc;
+
+	mutex_lock(&data->lock);
+
+	/* Protect against event capture. */
+	if (vcnl3020_is_in_periodic_mode(data)) {
+		rc = -EBUSY;
+		goto err_unlock;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(vcnl3020_prox_sampling_frequency); i++) {
+		if (val == vcnl3020_prox_sampling_frequency[i][0] &&
+		    val2 == vcnl3020_prox_sampling_frequency[i][1]) {
+			index = i;
+			break;
+		}
+	}
+
+	if (index < 0) {
+		rc = -EINVAL;
+		goto err_unlock;
+	}
+
+	rc = regmap_write(data->regmap, VCNL_PROXIMITY_RATE, index);
+	if (rc)
+		dev_err(data->dev,
+			"Error (%d) writing proximity rate register\n", rc);
+
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return rc;
+}
+
+static bool vcnl3020_is_thr_enabled(struct vcnl3020_data *data)
+{
+	int rc;
+	unsigned int icr;
+
+	rc = regmap_read(data->regmap, VCNL_PS_ICR, &icr);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) reading ICR register\n", rc);
+		return false;
+	}
+
+	return !!(icr & VCNL_ICR_THRES_EN);
+}
+
+static int vcnl3020_read_event(struct iio_dev *indio_dev,
+			       const struct iio_chan_spec *chan,
+			       enum iio_event_type type,
+			       enum iio_event_direction dir,
+			       enum iio_event_info info,
+			       int *val, int *val2)
+{
+	int rc;
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			rc = regmap_bulk_read(data->regmap, VCNL_PS_HI_THR_HI,
+					      &data->buf, sizeof(data->buf));
+			if (rc < 0)
+				return rc;
+			*val = be16_to_cpu(data->buf);
+			return IIO_VAL_INT;
+		case IIO_EV_DIR_FALLING:
+			rc = regmap_bulk_read(data->regmap, VCNL_PS_LO_THR_HI,
+					      &data->buf, sizeof(data->buf));
+			if (rc < 0)
+				return rc;
+			*val = be16_to_cpu(data->buf);
+			return IIO_VAL_INT;
+		default:
+			return -EINVAL;
+		}
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl3020_write_event(struct iio_dev *indio_dev,
+				const struct iio_chan_spec *chan,
+				enum iio_event_type type,
+				enum iio_event_direction dir,
+				enum iio_event_info info,
+				int val, int val2)
+{
+	int rc;
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+
+	mutex_lock(&data->lock);
+
+	switch (info) {
+	case IIO_EV_INFO_VALUE:
+		switch (dir) {
+		case IIO_EV_DIR_RISING:
+			/* 16 bit word/ low * high */
+			data->buf = cpu_to_be16(val);
+			rc = regmap_bulk_write(data->regmap, VCNL_PS_HI_THR_HI,
+					       &data->buf, sizeof(data->buf));
+			if (rc < 0)
+				goto err_unlock;
+			rc = IIO_VAL_INT;
+			goto err_unlock;
+		case IIO_EV_DIR_FALLING:
+			data->buf = cpu_to_be16(val);
+			rc = regmap_bulk_write(data->regmap, VCNL_PS_LO_THR_HI,
+					       &data->buf, sizeof(data->buf));
+			if (rc < 0)
+				goto err_unlock;
+			rc = IIO_VAL_INT;
+			goto err_unlock;
+		default:
+			rc = -EINVAL;
+			goto err_unlock;
+		}
+	default:
+		rc = -EINVAL;
+		goto err_unlock;
+	}
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return rc;
+}
+
+static int vcnl3020_enable_periodic(struct iio_dev *indio_dev,
+				    struct vcnl3020_data *data)
+{
+	int rc;
+	int cmd;
+
+	mutex_lock(&data->lock);
+
+	/* Enable periodic measurement of proximity data. */
+	cmd = VCNL_PS_EN | VCNL_PS_SELFTIMED_EN;
+
+	rc = regmap_write(data->regmap, VCNL_COMMAND, cmd);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) writing command register\n", rc);
+		goto err_unlock;
+	}
+
+	/*
+	 * Enable interrupts on threshold, for proximity data by
+	 * default.
+	 */
+	rc = regmap_write(data->regmap, VCNL_PS_ICR, VCNL_ICR_THRES_EN);
+	if (rc)
+		dev_err(data->dev,
+			"Error (%d) reading ICR register\n", rc);
+
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return rc;
+}
+
+static int vcnl3020_disable_periodic(struct iio_dev *indio_dev,
+				     struct vcnl3020_data *data)
+{
+	int rc;
+
+	mutex_lock(&data->lock);
+
+	rc = regmap_write(data->regmap, VCNL_COMMAND, 0);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) writing command register\n", rc);
+		goto err_unlock;
+	}
+
+	rc = regmap_write(data->regmap, VCNL_PS_ICR, 0);
+	if (rc) {
+		dev_err(data->dev,
+			"Error (%d) writing ICR register\n", rc);
+		goto err_unlock;
+	}
+
+	/* Clear interrupt flag bit */
+	rc = regmap_write(data->regmap, VCNL_ISR, 0);
+	if (rc)
+		dev_err(data->dev,
+			"Error (%d) writing ISR register\n", rc);
+
+err_unlock:
+	mutex_unlock(&data->lock);
+
+	return rc;
+}
+
+static int vcnl3020_config_threshold(struct iio_dev *indio_dev, bool state)
+{
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+
+	if (state) {
+		return vcnl3020_enable_periodic(indio_dev, data);
+	} else {
+		if (!vcnl3020_is_thr_enabled(data))
+			return 0;
+		return vcnl3020_disable_periodic(indio_dev, data);
+	}
+}
+
+static int vcnl3020_write_event_config(struct iio_dev *indio_dev,
+				       const struct iio_chan_spec *chan,
+				       enum iio_event_type type,
+				       enum iio_event_direction dir,
+				       int state)
+{
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		return vcnl3020_config_threshold(indio_dev, state);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl3020_read_event_config(struct iio_dev *indio_dev,
+				      const struct iio_chan_spec *chan,
+				      enum iio_event_type type,
+				      enum iio_event_direction dir)
+{
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+
+	switch (chan->type) {
+	case IIO_PROXIMITY:
+		return vcnl3020_is_thr_enabled(data);
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_event_spec vcnl3020_event_spec[] = {
+	{
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_RISING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_FALLING,
+		.mask_separate = BIT(IIO_EV_INFO_VALUE),
+	}, {
+		.type = IIO_EV_TYPE_THRESH,
+		.dir = IIO_EV_DIR_EITHER,
+		.mask_separate = BIT(IIO_EV_INFO_ENABLE),
+	},
+};
+
+static const struct iio_chan_spec vcnl3020_channels[] = {
+	{
+		.type = IIO_PROXIMITY,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.info_mask_separate_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
+		.event_spec = vcnl3020_event_spec,
+		.num_event_specs = ARRAY_SIZE(vcnl3020_event_spec),
+	},
+};
+
+static int vcnl3020_read_raw(struct iio_dev *indio_dev,
+			     struct iio_chan_spec const *chan, int *val,
+			     int *val2, long mask)
+{
+	int rc;
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		rc = vcnl3020_measure_proximity(data, val);
+		if (rc)
+			return rc;
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		rc = vcnl3020_read_proxy_samp_freq(data, val, val2);
+		if (rc < 0)
+			return rc;
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl3020_write_raw(struct iio_dev *indio_dev,
+			      struct iio_chan_spec const *chan,
+			      int val, int val2, long mask)
+{
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		return vcnl3020_write_proxy_samp_freq(data, val, val2);
+	default:
+		return -EINVAL;
+	}
+}
+
+static int vcnl3020_read_avail(struct iio_dev *indio_dev,
+			       struct iio_chan_spec const *chan,
+			       const int **vals, int *type, int *length,
+			       long mask)
+{
+	switch (mask) {
+	case IIO_CHAN_INFO_SAMP_FREQ:
+		*vals = (int *)vcnl3020_prox_sampling_frequency;
+		*type = IIO_VAL_INT_PLUS_MICRO;
+		*length = 2 * ARRAY_SIZE(vcnl3020_prox_sampling_frequency);
+		return IIO_AVAIL_LIST;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info vcnl3020_info = {
+	.read_raw = vcnl3020_read_raw,
+	.write_raw = vcnl3020_write_raw,
+	.read_avail = vcnl3020_read_avail,
+	.read_event_value = vcnl3020_read_event,
+	.write_event_value = vcnl3020_write_event,
+	.read_event_config = vcnl3020_read_event_config,
+	.write_event_config = vcnl3020_write_event_config,
+};
+
+static const struct regmap_config vcnl3020_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.max_register	= VCNL_PS_MOD_ADJ,
+};
+
+static irqreturn_t vcnl3020_handle_irq_thread(int irq, void *p)
+{
+	struct iio_dev *indio_dev = p;
+	struct vcnl3020_data *data = iio_priv(indio_dev);
+	unsigned int isr;
+	int rc;
+
+	rc = regmap_read(data->regmap, VCNL_ISR, &isr);
+	if (rc) {
+		dev_err(data->dev, "Error (%d) reading reg (0x%x)\n",
+			rc, VCNL_ISR);
+		return IRQ_HANDLED;
+	}
+
+	if (!(isr & VCNL_ICR_THRES_EN))
+		return IRQ_NONE;
+
+	iio_push_event(indio_dev,
+		       IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 1,
+				            IIO_EV_TYPE_THRESH,
+				            IIO_EV_DIR_RISING),
+		       iio_get_time_ns(indio_dev));
+
+	rc = regmap_write(data->regmap, VCNL_ISR, isr & VCNL_ICR_THRES_EN);
+	if (rc)
+		dev_err(data->dev, "Error (%d) writing in reg (0x%x)\n",
+			rc, VCNL_ISR);
+
+	return IRQ_HANDLED;
+}
+
+static int vcnl3020_probe(struct i2c_client *client)
+{
+	struct vcnl3020_data *data;
+	struct iio_dev *indio_dev;
+	struct regmap *regmap;
+	int rc;
+
+	regmap = devm_regmap_init_i2c(client, &vcnl3020_regmap_config);
+	if (IS_ERR(regmap)) {
+		dev_err(&client->dev, "regmap_init failed\n");
+		return PTR_ERR(regmap);
+	}
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	i2c_set_clientdata(client, indio_dev);
+	data->regmap = regmap;
+	data->dev = &client->dev;
+
+	rc = vcnl3020_init(data);
+	if (rc)
+		return rc;
+
+	indio_dev->info = &vcnl3020_info;
+	indio_dev->channels = vcnl3020_channels;
+	indio_dev->num_channels = ARRAY_SIZE(vcnl3020_channels);
+	indio_dev->name = "vcnl3020";
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	if (client->irq) {
+		rc = devm_request_threaded_irq(&client->dev, client->irq,
+					       NULL, vcnl3020_handle_irq_thread,
+					       IRQF_ONESHOT, indio_dev->name,
+					       indio_dev);
+		if (rc) {
+			dev_err(&client->dev,
+				"Error (%d) irq request failed (%u)\n", rc,
+				client->irq);
+			return rc;
+		}
+	}
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct of_device_id vcnl3020_of_match[] = {
+	{
+		.compatible = "vishay,vcnl3020",
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(of, vcnl3020_of_match);
+
+static struct i2c_driver vcnl3020_driver = {
+	.driver = {
+		.name   = "vcnl3020",
+		.of_match_table = vcnl3020_of_match,
+	},
+	.probe_new  = vcnl3020_probe,
+};
+module_i2c_driver(vcnl3020_driver);
+
+MODULE_AUTHOR("Ivan Mikhaylov <i.mikhaylov@yadro.com>");
+MODULE_DESCRIPTION("Vishay VCNL3020 proximity sensor driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/iio/proximity/vl53l0x-i2c.c b/drivers/iio/proximity/vl53l0x-i2c.c
new file mode 100644
index 000000000..c7c4d33d3
--- /dev/null
+++ b/drivers/iio/proximity/vl53l0x-i2c.c
@@ -0,0 +1,304 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Support for ST VL53L0X FlightSense ToF Ranging Sensor on a i2c bus.
+ *
+ * Copyright (C) 2016 STMicroelectronics Imaging Division.
+ * Copyright (C) 2018 Song Qiang <songqiang1304521@gmail.com>
+ * Copyright (C) 2020 Ivan Drobyshevskyi <drobyshevskyi@gmail.com>
+ *
+ * Datasheet available at
+ * <https://www.st.com/resource/en/datasheet/vl53l0x.pdf>
+ *
+ * Default 7-bit i2c slave address 0x29.
+ *
+ * TODO: FIFO buffer, continuous mode, range selection, sensor ID check.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <linux/iio/iio.h>
+
+#define VL_REG_SYSRANGE_START				0x00
+
+#define VL_REG_SYSRANGE_MODE_MASK			GENMASK(3, 0)
+#define VL_REG_SYSRANGE_MODE_SINGLESHOT			0x00
+#define VL_REG_SYSRANGE_MODE_START_STOP			BIT(0)
+#define VL_REG_SYSRANGE_MODE_BACKTOBACK			BIT(1)
+#define VL_REG_SYSRANGE_MODE_TIMED			BIT(2)
+#define VL_REG_SYSRANGE_MODE_HISTOGRAM			BIT(3)
+
+#define VL_REG_SYSTEM_INTERRUPT_CONFIG_GPIO		0x0A
+#define VL_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY	BIT(2)
+
+#define VL_REG_SYSTEM_INTERRUPT_CLEAR			0x0B
+
+#define VL_REG_RESULT_INT_STATUS			0x13
+#define VL_REG_RESULT_RANGE_STATUS			0x14
+#define VL_REG_RESULT_RANGE_STATUS_COMPLETE		BIT(0)
+
+struct vl53l0x_data {
+	struct i2c_client *client;
+	struct completion completion;
+	struct regulator *vdd_supply;
+	struct gpio_desc *reset_gpio;
+};
+
+static irqreturn_t vl53l0x_handle_irq(int irq, void *priv)
+{
+	struct iio_dev *indio_dev = priv;
+	struct vl53l0x_data *data = iio_priv(indio_dev);
+
+	complete(&data->completion);
+
+	return IRQ_HANDLED;
+}
+
+static int vl53l0x_configure_irq(struct i2c_client *client,
+				 struct iio_dev *indio_dev)
+{
+	int irq_flags = irq_get_trigger_type(client->irq);
+	struct vl53l0x_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (!irq_flags)
+		irq_flags = IRQF_TRIGGER_FALLING;
+
+	ret = devm_request_irq(&client->dev, client->irq, vl53l0x_handle_irq,
+			irq_flags, indio_dev->name, indio_dev);
+	if (ret) {
+		dev_err(&client->dev, "devm_request_irq error: %d\n", ret);
+		return ret;
+	}
+
+	ret = i2c_smbus_write_byte_data(data->client,
+			VL_REG_SYSTEM_INTERRUPT_CONFIG_GPIO,
+			VL_REG_SYSTEM_INTERRUPT_GPIO_NEW_SAMPLE_READY);
+	if (ret < 0)
+		dev_err(&client->dev, "failed to configure IRQ: %d\n", ret);
+
+	return ret;
+}
+
+static void vl53l0x_clear_irq(struct vl53l0x_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					VL_REG_SYSTEM_INTERRUPT_CLEAR, 1);
+	if (ret < 0)
+		dev_err(dev, "failed to clear error irq: %d\n", ret);
+
+	ret = i2c_smbus_write_byte_data(data->client,
+					VL_REG_SYSTEM_INTERRUPT_CLEAR, 0);
+	if (ret < 0)
+		dev_err(dev, "failed to clear range irq: %d\n", ret);
+
+	ret = i2c_smbus_read_byte_data(data->client, VL_REG_RESULT_INT_STATUS);
+	if (ret < 0 || ret & 0x07)
+		dev_err(dev, "failed to clear irq: %d\n", ret);
+}
+
+static int vl53l0x_read_proximity(struct vl53l0x_data *data,
+				  const struct iio_chan_spec *chan,
+				  int *val)
+{
+	struct i2c_client *client = data->client;
+	u16 tries = 20;
+	u8 buffer[12];
+	int ret;
+	unsigned long time_left;
+
+	ret = i2c_smbus_write_byte_data(client, VL_REG_SYSRANGE_START, 1);
+	if (ret < 0)
+		return ret;
+
+	if (data->client->irq) {
+		reinit_completion(&data->completion);
+
+		time_left = wait_for_completion_timeout(&data->completion, HZ/10);
+		if (time_left == 0)
+			return -ETIMEDOUT;
+
+		vl53l0x_clear_irq(data);
+	} else {
+		do {
+			ret = i2c_smbus_read_byte_data(client,
+					       VL_REG_RESULT_RANGE_STATUS);
+			if (ret < 0)
+				return ret;
+
+			if (ret & VL_REG_RESULT_RANGE_STATUS_COMPLETE)
+				break;
+
+			usleep_range(1000, 5000);
+		} while (--tries);
+		if (!tries)
+			return -ETIMEDOUT;
+	}
+
+	ret = i2c_smbus_read_i2c_block_data(client, VL_REG_RESULT_RANGE_STATUS,
+					    12, buffer);
+	if (ret < 0)
+		return ret;
+	else if (ret != 12)
+		return -EREMOTEIO;
+
+	/* Values should be between 30~1200 in millimeters. */
+	*val = (buffer[10] << 8) + buffer[11];
+
+	return 0;
+}
+
+static const struct iio_chan_spec vl53l0x_channels[] = {
+	{
+		.type = IIO_DISTANCE,
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
+				      BIT(IIO_CHAN_INFO_SCALE),
+	},
+};
+
+static int vl53l0x_read_raw(struct iio_dev *indio_dev,
+			    const struct iio_chan_spec *chan,
+			    int *val, int *val2, long mask)
+{
+	struct vl53l0x_data *data = iio_priv(indio_dev);
+	int ret;
+
+	if (chan->type != IIO_DISTANCE)
+		return -EINVAL;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+		ret = vl53l0x_read_proximity(data, chan, val);
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+	case IIO_CHAN_INFO_SCALE:
+		*val = 0;
+		*val2 = 1000;
+
+		return IIO_VAL_INT_PLUS_MICRO;
+	default:
+		return -EINVAL;
+	}
+}
+
+static const struct iio_info vl53l0x_info = {
+	.read_raw = vl53l0x_read_raw,
+};
+
+static void vl53l0x_power_off(void *_data)
+{
+	struct vl53l0x_data *data = _data;
+
+	gpiod_set_value_cansleep(data->reset_gpio, 1);
+
+	regulator_disable(data->vdd_supply);
+}
+
+static int vl53l0x_power_on(struct vl53l0x_data *data)
+{
+	int ret;
+
+	ret = regulator_enable(data->vdd_supply);
+	if (ret)
+		return ret;
+
+	gpiod_set_value_cansleep(data->reset_gpio, 0);
+
+	usleep_range(3200, 5000);
+
+	return 0;
+}
+
+static int vl53l0x_probe(struct i2c_client *client)
+{
+	struct vl53l0x_data *data;
+	struct iio_dev *indio_dev;
+	int error;
+
+	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	data = iio_priv(indio_dev);
+	data->client = client;
+	i2c_set_clientdata(client, indio_dev);
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_I2C_BLOCK |
+				     I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EOPNOTSUPP;
+
+	data->vdd_supply = devm_regulator_get(&client->dev, "vdd");
+	if (IS_ERR(data->vdd_supply))
+		return dev_err_probe(&client->dev, PTR_ERR(data->vdd_supply),
+				     "Unable to get VDD regulator\n");
+
+	data->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(data->reset_gpio))
+		return dev_err_probe(&client->dev, PTR_ERR(data->reset_gpio),
+				     "Cannot get reset GPIO\n");
+
+	error = vl53l0x_power_on(data);
+	if (error)
+		return dev_err_probe(&client->dev, error,
+				     "Failed to power on the chip\n");
+
+	error = devm_add_action_or_reset(&client->dev, vl53l0x_power_off, data);
+	if (error)
+		return dev_err_probe(&client->dev, error,
+				     "Failed to install poweroff action\n");
+
+	indio_dev->name = "vl53l0x";
+	indio_dev->info = &vl53l0x_info;
+	indio_dev->channels = vl53l0x_channels;
+	indio_dev->num_channels = ARRAY_SIZE(vl53l0x_channels);
+	indio_dev->modes = INDIO_DIRECT_MODE;
+
+	/* usage of interrupt is optional */
+	if (client->irq) {
+		int ret;
+
+		init_completion(&data->completion);
+
+		ret = vl53l0x_configure_irq(client, indio_dev);
+		if (ret)
+			return ret;
+	}
+
+	return devm_iio_device_register(&client->dev, indio_dev);
+}
+
+static const struct i2c_device_id vl53l0x_id[] = {
+	{ "vl53l0x", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, vl53l0x_id);
+
+static const struct of_device_id st_vl53l0x_dt_match[] = {
+	{ .compatible = "st,vl53l0x", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, st_vl53l0x_dt_match);
+
+static struct i2c_driver vl53l0x_driver = {
+	.driver = {
+		.name = "vl53l0x-i2c",
+		.of_match_table = st_vl53l0x_dt_match,
+	},
+	.probe_new = vl53l0x_probe,
+	.id_table = vl53l0x_id,
+};
+module_i2c_driver(vl53l0x_driver);
+
+MODULE_AUTHOR("Song Qiang <songqiang1304521@gmail.com>");
+MODULE_DESCRIPTION("ST vl53l0x ToF ranging sensor driver");
+MODULE_LICENSE("GPL v2");