Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1798 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/qib/qib_init.c b/drivers/infiniband/hw/qib/qib_init.c
new file mode 100644
index 000000000..452110084
--- /dev/null
+++ b/drivers/infiniband/hw/qib/qib_init.c
@@ -0,0 +1,1798 @@
+/*
+ * Copyright (c) 2012, 2013 Intel Corporation.  All rights reserved.
+ * Copyright (c) 2006 - 2012 QLogic Corporation. All rights reserved.
+ * Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses.  You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ *     Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *      - Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *
+ *      - Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/printk.h>
+#ifdef CONFIG_INFINIBAND_QIB_DCA
+#include <linux/dca.h>
+#endif
+#include <rdma/rdma_vt.h>
+
+#include "qib.h"
+#include "qib_common.h"
+#include "qib_mad.h"
+#ifdef CONFIG_DEBUG_FS
+#include "qib_debugfs.h"
+#include "qib_verbs.h"
+#endif
+
+#undef pr_fmt
+#define pr_fmt(fmt) QIB_DRV_NAME ": " fmt
+
+/*
+ * min buffers we want to have per context, after driver
+ */
+#define QIB_MIN_USER_CTXT_BUFCNT 7
+
+#define QLOGIC_IB_R_SOFTWARE_MASK 0xFF
+#define QLOGIC_IB_R_SOFTWARE_SHIFT 24
+#define QLOGIC_IB_R_EMULATOR_MASK (1ULL<<62)
+
+/*
+ * Number of ctxts we are configured to use (to allow for more pio
+ * buffers per ctxt, etc.)  Zero means use chip value.
+ */
+ushort qib_cfgctxts;
+module_param_named(cfgctxts, qib_cfgctxts, ushort, S_IRUGO);
+MODULE_PARM_DESC(cfgctxts, "Set max number of contexts to use");
+
+unsigned qib_numa_aware;
+module_param_named(numa_aware, qib_numa_aware, uint, S_IRUGO);
+MODULE_PARM_DESC(numa_aware,
+	"0 -> PSM allocation close to HCA, 1 -> PSM allocation local to process");
+
+/*
+ * If set, do not write to any regs if avoidable, hack to allow
+ * check for deranged default register values.
+ */
+ushort qib_mini_init;
+module_param_named(mini_init, qib_mini_init, ushort, S_IRUGO);
+MODULE_PARM_DESC(mini_init, "If set, do minimal diag init");
+
+unsigned qib_n_krcv_queues;
+module_param_named(krcvqs, qib_n_krcv_queues, uint, S_IRUGO);
+MODULE_PARM_DESC(krcvqs, "number of kernel receive queues per IB port");
+
+unsigned qib_cc_table_size;
+module_param_named(cc_table_size, qib_cc_table_size, uint, S_IRUGO);
+MODULE_PARM_DESC(cc_table_size, "Congestion control table entries 0 (CCA disabled - default), min = 128, max = 1984");
+
+static void verify_interrupt(struct timer_list *);
+
+DEFINE_XARRAY_FLAGS(qib_dev_table, XA_FLAGS_ALLOC | XA_FLAGS_LOCK_IRQ);
+u32 qib_cpulist_count;
+unsigned long *qib_cpulist;
+
+/* set number of contexts we'll actually use */
+void qib_set_ctxtcnt(struct qib_devdata *dd)
+{
+	if (!qib_cfgctxts) {
+		dd->cfgctxts = dd->first_user_ctxt + num_online_cpus();
+		if (dd->cfgctxts > dd->ctxtcnt)
+			dd->cfgctxts = dd->ctxtcnt;
+	} else if (qib_cfgctxts < dd->num_pports)
+		dd->cfgctxts = dd->ctxtcnt;
+	else if (qib_cfgctxts <= dd->ctxtcnt)
+		dd->cfgctxts = qib_cfgctxts;
+	else
+		dd->cfgctxts = dd->ctxtcnt;
+	dd->freectxts = (dd->first_user_ctxt > dd->cfgctxts) ? 0 :
+		dd->cfgctxts - dd->first_user_ctxt;
+}
+
+/*
+ * Common code for creating the receive context array.
+ */
+int qib_create_ctxts(struct qib_devdata *dd)
+{
+	unsigned i;
+	int local_node_id = pcibus_to_node(dd->pcidev->bus);
+
+	if (local_node_id < 0)
+		local_node_id = numa_node_id();
+	dd->assigned_node_id = local_node_id;
+
+	/*
+	 * Allocate full ctxtcnt array, rather than just cfgctxts, because
+	 * cleanup iterates across all possible ctxts.
+	 */
+	dd->rcd = kcalloc(dd->ctxtcnt, sizeof(*dd->rcd), GFP_KERNEL);
+	if (!dd->rcd)
+		return -ENOMEM;
+
+	/* create (one or more) kctxt */
+	for (i = 0; i < dd->first_user_ctxt; ++i) {
+		struct qib_pportdata *ppd;
+		struct qib_ctxtdata *rcd;
+
+		if (dd->skip_kctxt_mask & (1 << i))
+			continue;
+
+		ppd = dd->pport + (i % dd->num_pports);
+
+		rcd = qib_create_ctxtdata(ppd, i, dd->assigned_node_id);
+		if (!rcd) {
+			qib_dev_err(dd,
+				"Unable to allocate ctxtdata for Kernel ctxt, failing\n");
+			kfree(dd->rcd);
+			dd->rcd = NULL;
+			return -ENOMEM;
+		}
+		rcd->pkeys[0] = QIB_DEFAULT_P_KEY;
+		rcd->seq_cnt = 1;
+	}
+	return 0;
+}
+
+/*
+ * Common code for user and kernel context setup.
+ */
+struct qib_ctxtdata *qib_create_ctxtdata(struct qib_pportdata *ppd, u32 ctxt,
+	int node_id)
+{
+	struct qib_devdata *dd = ppd->dd;
+	struct qib_ctxtdata *rcd;
+
+	rcd = kzalloc_node(sizeof(*rcd), GFP_KERNEL, node_id);
+	if (rcd) {
+		INIT_LIST_HEAD(&rcd->qp_wait_list);
+		rcd->node_id = node_id;
+		rcd->ppd = ppd;
+		rcd->dd = dd;
+		rcd->cnt = 1;
+		rcd->ctxt = ctxt;
+		dd->rcd[ctxt] = rcd;
+#ifdef CONFIG_DEBUG_FS
+		if (ctxt < dd->first_user_ctxt) { /* N/A for PSM contexts */
+			rcd->opstats = kzalloc_node(sizeof(*rcd->opstats),
+				GFP_KERNEL, node_id);
+			if (!rcd->opstats) {
+				kfree(rcd);
+				qib_dev_err(dd,
+					"Unable to allocate per ctxt stats buffer\n");
+				return NULL;
+			}
+		}
+#endif
+		dd->f_init_ctxt(rcd);
+
+		/*
+		 * To avoid wasting a lot of memory, we allocate 32KB chunks
+		 * of physically contiguous memory, advance through it until
+		 * used up and then allocate more.  Of course, we need
+		 * memory to store those extra pointers, now.  32KB seems to
+		 * be the most that is "safe" under memory pressure
+		 * (creating large files and then copying them over
+		 * NFS while doing lots of MPI jobs).  The OOM killer can
+		 * get invoked, even though we say we can sleep and this can
+		 * cause significant system problems....
+		 */
+		rcd->rcvegrbuf_size = 0x8000;
+		rcd->rcvegrbufs_perchunk =
+			rcd->rcvegrbuf_size / dd->rcvegrbufsize;
+		rcd->rcvegrbuf_chunks = (rcd->rcvegrcnt +
+			rcd->rcvegrbufs_perchunk - 1) /
+			rcd->rcvegrbufs_perchunk;
+		rcd->rcvegrbufs_perchunk_shift =
+			ilog2(rcd->rcvegrbufs_perchunk);
+	}
+	return rcd;
+}
+
+/*
+ * Common code for initializing the physical port structure.
+ */
+int qib_init_pportdata(struct qib_pportdata *ppd, struct qib_devdata *dd,
+			u8 hw_pidx, u8 port)
+{
+	int size;
+
+	ppd->dd = dd;
+	ppd->hw_pidx = hw_pidx;
+	ppd->port = port; /* IB port number, not index */
+
+	spin_lock_init(&ppd->sdma_lock);
+	spin_lock_init(&ppd->lflags_lock);
+	spin_lock_init(&ppd->cc_shadow_lock);
+	init_waitqueue_head(&ppd->state_wait);
+
+	timer_setup(&ppd->symerr_clear_timer, qib_clear_symerror_on_linkup, 0);
+
+	ppd->qib_wq = NULL;
+	ppd->ibport_data.pmastats =
+		alloc_percpu(struct qib_pma_counters);
+	if (!ppd->ibport_data.pmastats)
+		return -ENOMEM;
+	ppd->ibport_data.rvp.rc_acks = alloc_percpu(u64);
+	ppd->ibport_data.rvp.rc_qacks = alloc_percpu(u64);
+	ppd->ibport_data.rvp.rc_delayed_comp = alloc_percpu(u64);
+	if (!(ppd->ibport_data.rvp.rc_acks) ||
+	    !(ppd->ibport_data.rvp.rc_qacks) ||
+	    !(ppd->ibport_data.rvp.rc_delayed_comp))
+		return -ENOMEM;
+
+	if (qib_cc_table_size < IB_CCT_MIN_ENTRIES)
+		goto bail;
+
+	ppd->cc_supported_table_entries = min(max_t(int, qib_cc_table_size,
+		IB_CCT_MIN_ENTRIES), IB_CCT_ENTRIES*IB_CC_TABLE_CAP_DEFAULT);
+
+	ppd->cc_max_table_entries =
+		ppd->cc_supported_table_entries/IB_CCT_ENTRIES;
+
+	size = IB_CC_TABLE_CAP_DEFAULT * sizeof(struct ib_cc_table_entry)
+		* IB_CCT_ENTRIES;
+	ppd->ccti_entries = kzalloc(size, GFP_KERNEL);
+	if (!ppd->ccti_entries)
+		goto bail;
+
+	size = IB_CC_CCS_ENTRIES * sizeof(struct ib_cc_congestion_entry);
+	ppd->congestion_entries = kzalloc(size, GFP_KERNEL);
+	if (!ppd->congestion_entries)
+		goto bail_1;
+
+	size = sizeof(struct cc_table_shadow);
+	ppd->ccti_entries_shadow = kzalloc(size, GFP_KERNEL);
+	if (!ppd->ccti_entries_shadow)
+		goto bail_2;
+
+	size = sizeof(struct ib_cc_congestion_setting_attr);
+	ppd->congestion_entries_shadow = kzalloc(size, GFP_KERNEL);
+	if (!ppd->congestion_entries_shadow)
+		goto bail_3;
+
+	return 0;
+
+bail_3:
+	kfree(ppd->ccti_entries_shadow);
+	ppd->ccti_entries_shadow = NULL;
+bail_2:
+	kfree(ppd->congestion_entries);
+	ppd->congestion_entries = NULL;
+bail_1:
+	kfree(ppd->ccti_entries);
+	ppd->ccti_entries = NULL;
+bail:
+	/* User is intentionally disabling the congestion control agent */
+	if (!qib_cc_table_size)
+		return 0;
+
+	if (qib_cc_table_size < IB_CCT_MIN_ENTRIES) {
+		qib_cc_table_size = 0;
+		qib_dev_err(dd,
+		 "Congestion Control table size %d less than minimum %d for port %d\n",
+		 qib_cc_table_size, IB_CCT_MIN_ENTRIES, port);
+	}
+
+	qib_dev_err(dd, "Congestion Control Agent disabled for port %d\n",
+		port);
+	return 0;
+}
+
+static int init_pioavailregs(struct qib_devdata *dd)
+{
+	int ret, pidx;
+	u64 *status_page;
+
+	dd->pioavailregs_dma = dma_alloc_coherent(
+		&dd->pcidev->dev, PAGE_SIZE, &dd->pioavailregs_phys,
+		GFP_KERNEL);
+	if (!dd->pioavailregs_dma) {
+		qib_dev_err(dd,
+			"failed to allocate PIOavail reg area in memory\n");
+		ret = -ENOMEM;
+		goto done;
+	}
+
+	/*
+	 * We really want L2 cache aligned, but for current CPUs of
+	 * interest, they are the same.
+	 */
+	status_page = (u64 *)
+		((char *) dd->pioavailregs_dma +
+		 ((2 * L1_CACHE_BYTES +
+		   dd->pioavregs * sizeof(u64)) & ~L1_CACHE_BYTES));
+	/* device status comes first, for backwards compatibility */
+	dd->devstatusp = status_page;
+	*status_page++ = 0;
+	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+		dd->pport[pidx].statusp = status_page;
+		*status_page++ = 0;
+	}
+
+	/*
+	 * Setup buffer to hold freeze and other messages, accessible to
+	 * apps, following statusp.  This is per-unit, not per port.
+	 */
+	dd->freezemsg = (char *) status_page;
+	*dd->freezemsg = 0;
+	/* length of msg buffer is "whatever is left" */
+	ret = (char *) status_page - (char *) dd->pioavailregs_dma;
+	dd->freezelen = PAGE_SIZE - ret;
+
+	ret = 0;
+
+done:
+	return ret;
+}
+
+/**
+ * init_shadow_tids - allocate the shadow TID array
+ * @dd: the qlogic_ib device
+ *
+ * allocate the shadow TID array, so we can qib_munlock previous
+ * entries.  It may make more sense to move the pageshadow to the
+ * ctxt data structure, so we only allocate memory for ctxts actually
+ * in use, since we at 8k per ctxt, now.
+ * We don't want failures here to prevent use of the driver/chip,
+ * so no return value.
+ */
+static void init_shadow_tids(struct qib_devdata *dd)
+{
+	struct page **pages;
+	dma_addr_t *addrs;
+
+	pages = vzalloc(array_size(sizeof(struct page *),
+				   dd->cfgctxts * dd->rcvtidcnt));
+	if (!pages)
+		goto bail;
+
+	addrs = vzalloc(array_size(sizeof(dma_addr_t),
+				   dd->cfgctxts * dd->rcvtidcnt));
+	if (!addrs)
+		goto bail_free;
+
+	dd->pageshadow = pages;
+	dd->physshadow = addrs;
+	return;
+
+bail_free:
+	vfree(pages);
+bail:
+	dd->pageshadow = NULL;
+}
+
+/*
+ * Do initialization for device that is only needed on
+ * first detect, not on resets.
+ */
+static int loadtime_init(struct qib_devdata *dd)
+{
+	int ret = 0;
+
+	if (((dd->revision >> QLOGIC_IB_R_SOFTWARE_SHIFT) &
+	     QLOGIC_IB_R_SOFTWARE_MASK) != QIB_CHIP_SWVERSION) {
+		qib_dev_err(dd,
+			"Driver only handles version %d, chip swversion is %d (%llx), failing\n",
+			QIB_CHIP_SWVERSION,
+			(int)(dd->revision >>
+				QLOGIC_IB_R_SOFTWARE_SHIFT) &
+				QLOGIC_IB_R_SOFTWARE_MASK,
+			(unsigned long long) dd->revision);
+		ret = -ENOSYS;
+		goto done;
+	}
+
+	if (dd->revision & QLOGIC_IB_R_EMULATOR_MASK)
+		qib_devinfo(dd->pcidev, "%s", dd->boardversion);
+
+	spin_lock_init(&dd->pioavail_lock);
+	spin_lock_init(&dd->sendctrl_lock);
+	spin_lock_init(&dd->uctxt_lock);
+	spin_lock_init(&dd->qib_diag_trans_lock);
+	spin_lock_init(&dd->eep_st_lock);
+	mutex_init(&dd->eep_lock);
+
+	if (qib_mini_init)
+		goto done;
+
+	ret = init_pioavailregs(dd);
+	init_shadow_tids(dd);
+
+	qib_get_eeprom_info(dd);
+
+	/* setup time (don't start yet) to verify we got interrupt */
+	timer_setup(&dd->intrchk_timer, verify_interrupt, 0);
+done:
+	return ret;
+}
+
+/**
+ * init_after_reset - re-initialize after a reset
+ * @dd: the qlogic_ib device
+ *
+ * sanity check at least some of the values after reset, and
+ * ensure no receive or transmit (explicitly, in case reset
+ * failed
+ */
+static int init_after_reset(struct qib_devdata *dd)
+{
+	int i;
+
+	/*
+	 * Ensure chip does no sends or receives, tail updates, or
+	 * pioavail updates while we re-initialize.  This is mostly
+	 * for the driver data structures, not chip registers.
+	 */
+	for (i = 0; i < dd->num_pports; ++i) {
+		/*
+		 * ctxt == -1 means "all contexts". Only really safe for
+		 * _dis_abling things, as here.
+		 */
+		dd->f_rcvctrl(dd->pport + i, QIB_RCVCTRL_CTXT_DIS |
+				  QIB_RCVCTRL_INTRAVAIL_DIS |
+				  QIB_RCVCTRL_TAILUPD_DIS, -1);
+		/* Redundant across ports for some, but no big deal.  */
+		dd->f_sendctrl(dd->pport + i, QIB_SENDCTRL_SEND_DIS |
+			QIB_SENDCTRL_AVAIL_DIS);
+	}
+
+	return 0;
+}
+
+static void enable_chip(struct qib_devdata *dd)
+{
+	u64 rcvmask;
+	int i;
+
+	/*
+	 * Enable PIO send, and update of PIOavail regs to memory.
+	 */
+	for (i = 0; i < dd->num_pports; ++i)
+		dd->f_sendctrl(dd->pport + i, QIB_SENDCTRL_SEND_ENB |
+			QIB_SENDCTRL_AVAIL_ENB);
+	/*
+	 * Enable kernel ctxts' receive and receive interrupt.
+	 * Other ctxts done as user opens and inits them.
+	 */
+	rcvmask = QIB_RCVCTRL_CTXT_ENB | QIB_RCVCTRL_INTRAVAIL_ENB;
+	rcvmask |= (dd->flags & QIB_NODMA_RTAIL) ?
+		  QIB_RCVCTRL_TAILUPD_DIS : QIB_RCVCTRL_TAILUPD_ENB;
+	for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) {
+		struct qib_ctxtdata *rcd = dd->rcd[i];
+
+		if (rcd)
+			dd->f_rcvctrl(rcd->ppd, rcvmask, i);
+	}
+}
+
+static void verify_interrupt(struct timer_list *t)
+{
+	struct qib_devdata *dd = from_timer(dd, t, intrchk_timer);
+	u64 int_counter;
+
+	if (!dd)
+		return; /* being torn down */
+
+	/*
+	 * If we don't have a lid or any interrupts, let the user know and
+	 * don't bother checking again.
+	 */
+	int_counter = qib_int_counter(dd) - dd->z_int_counter;
+	if (int_counter == 0) {
+		if (!dd->f_intr_fallback(dd))
+			dev_err(&dd->pcidev->dev,
+				"No interrupts detected, not usable.\n");
+		else /* re-arm the timer to see if fallback works */
+			mod_timer(&dd->intrchk_timer, jiffies + HZ/2);
+	}
+}
+
+static void init_piobuf_state(struct qib_devdata *dd)
+{
+	int i, pidx;
+	u32 uctxts;
+
+	/*
+	 * Ensure all buffers are free, and fifos empty.  Buffers
+	 * are common, so only do once for port 0.
+	 *
+	 * After enable and qib_chg_pioavailkernel so we can safely
+	 * enable pioavail updates and PIOENABLE.  After this, packets
+	 * are ready and able to go out.
+	 */
+	dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_ALL);
+	for (pidx = 0; pidx < dd->num_pports; ++pidx)
+		dd->f_sendctrl(dd->pport + pidx, QIB_SENDCTRL_FLUSH);
+
+	/*
+	 * If not all sendbufs are used, add the one to each of the lower
+	 * numbered contexts.  pbufsctxt and lastctxt_piobuf are
+	 * calculated in chip-specific code because it may cause some
+	 * chip-specific adjustments to be made.
+	 */
+	uctxts = dd->cfgctxts - dd->first_user_ctxt;
+	dd->ctxts_extrabuf = dd->pbufsctxt ?
+		dd->lastctxt_piobuf - (dd->pbufsctxt * uctxts) : 0;
+
+	/*
+	 * Set up the shadow copies of the piobufavail registers,
+	 * which we compare against the chip registers for now, and
+	 * the in memory DMA'ed copies of the registers.
+	 * By now pioavail updates to memory should have occurred, so
+	 * copy them into our working/shadow registers; this is in
+	 * case something went wrong with abort, but mostly to get the
+	 * initial values of the generation bit correct.
+	 */
+	for (i = 0; i < dd->pioavregs; i++) {
+		__le64 tmp;
+
+		tmp = dd->pioavailregs_dma[i];
+		/*
+		 * Don't need to worry about pioavailkernel here
+		 * because we will call qib_chg_pioavailkernel() later
+		 * in initialization, to busy out buffers as needed.
+		 */
+		dd->pioavailshadow[i] = le64_to_cpu(tmp);
+	}
+	while (i < ARRAY_SIZE(dd->pioavailshadow))
+		dd->pioavailshadow[i++] = 0; /* for debugging sanity */
+
+	/* after pioavailshadow is setup */
+	qib_chg_pioavailkernel(dd, 0, dd->piobcnt2k + dd->piobcnt4k,
+			       TXCHK_CHG_TYPE_KERN, NULL);
+	dd->f_initvl15_bufs(dd);
+}
+
+/**
+ * qib_create_workqueues - create per port workqueues
+ * @dd: the qlogic_ib device
+ */
+static int qib_create_workqueues(struct qib_devdata *dd)
+{
+	int pidx;
+	struct qib_pportdata *ppd;
+
+	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+		ppd = dd->pport + pidx;
+		if (!ppd->qib_wq) {
+			char wq_name[8]; /* 3 + 2 + 1 + 1 + 1 */
+
+			snprintf(wq_name, sizeof(wq_name), "qib%d_%d",
+				dd->unit, pidx);
+			ppd->qib_wq = alloc_ordered_workqueue(wq_name,
+							      WQ_MEM_RECLAIM);
+			if (!ppd->qib_wq)
+				goto wq_error;
+		}
+	}
+	return 0;
+wq_error:
+	pr_err("create_singlethread_workqueue failed for port %d\n",
+		pidx + 1);
+	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+		ppd = dd->pport + pidx;
+		if (ppd->qib_wq) {
+			destroy_workqueue(ppd->qib_wq);
+			ppd->qib_wq = NULL;
+		}
+	}
+	return -ENOMEM;
+}
+
+static void qib_free_pportdata(struct qib_pportdata *ppd)
+{
+	free_percpu(ppd->ibport_data.pmastats);
+	free_percpu(ppd->ibport_data.rvp.rc_acks);
+	free_percpu(ppd->ibport_data.rvp.rc_qacks);
+	free_percpu(ppd->ibport_data.rvp.rc_delayed_comp);
+	ppd->ibport_data.pmastats = NULL;
+}
+
+/**
+ * qib_init - do the actual initialization sequence on the chip
+ * @dd: the qlogic_ib device
+ * @reinit: reinitializing, so don't allocate new memory
+ *
+ * Do the actual initialization sequence on the chip.  This is done
+ * both from the init routine called from the PCI infrastructure, and
+ * when we reset the chip, or detect that it was reset internally,
+ * or it's administratively re-enabled.
+ *
+ * Memory allocation here and in called routines is only done in
+ * the first case (reinit == 0).  We have to be careful, because even
+ * without memory allocation, we need to re-write all the chip registers
+ * TIDs, etc. after the reset or enable has completed.
+ */
+int qib_init(struct qib_devdata *dd, int reinit)
+{
+	int ret = 0, pidx, lastfail = 0;
+	u32 portok = 0;
+	unsigned i;
+	struct qib_ctxtdata *rcd;
+	struct qib_pportdata *ppd;
+	unsigned long flags;
+
+	/* Set linkstate to unknown, so we can watch for a transition. */
+	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+		ppd = dd->pport + pidx;
+		spin_lock_irqsave(&ppd->lflags_lock, flags);
+		ppd->lflags &= ~(QIBL_LINKACTIVE | QIBL_LINKARMED |
+				 QIBL_LINKDOWN | QIBL_LINKINIT |
+				 QIBL_LINKV);
+		spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+	}
+
+	if (reinit)
+		ret = init_after_reset(dd);
+	else
+		ret = loadtime_init(dd);
+	if (ret)
+		goto done;
+
+	/* Bypass most chip-init, to get to device creation */
+	if (qib_mini_init)
+		return 0;
+
+	ret = dd->f_late_initreg(dd);
+	if (ret)
+		goto done;
+
+	/* dd->rcd can be NULL if early init failed */
+	for (i = 0; dd->rcd && i < dd->first_user_ctxt; ++i) {
+		/*
+		 * Set up the (kernel) rcvhdr queue and egr TIDs.  If doing
+		 * re-init, the simplest way to handle this is to free
+		 * existing, and re-allocate.
+		 * Need to re-create rest of ctxt 0 ctxtdata as well.
+		 */
+		rcd = dd->rcd[i];
+		if (!rcd)
+			continue;
+
+		lastfail = qib_create_rcvhdrq(dd, rcd);
+		if (!lastfail)
+			lastfail = qib_setup_eagerbufs(rcd);
+		if (lastfail)
+			qib_dev_err(dd,
+				"failed to allocate kernel ctxt's rcvhdrq and/or egr bufs\n");
+	}
+
+	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+		int mtu;
+
+		if (lastfail)
+			ret = lastfail;
+		ppd = dd->pport + pidx;
+		mtu = ib_mtu_enum_to_int(qib_ibmtu);
+		if (mtu == -1) {
+			mtu = QIB_DEFAULT_MTU;
+			qib_ibmtu = 0; /* don't leave invalid value */
+		}
+		/* set max we can ever have for this driver load */
+		ppd->init_ibmaxlen = min(mtu > 2048 ?
+					 dd->piosize4k : dd->piosize2k,
+					 dd->rcvegrbufsize +
+					 (dd->rcvhdrentsize << 2));
+		/*
+		 * Have to initialize ibmaxlen, but this will normally
+		 * change immediately in qib_set_mtu().
+		 */
+		ppd->ibmaxlen = ppd->init_ibmaxlen;
+		qib_set_mtu(ppd, mtu);
+
+		spin_lock_irqsave(&ppd->lflags_lock, flags);
+		ppd->lflags |= QIBL_IB_LINK_DISABLED;
+		spin_unlock_irqrestore(&ppd->lflags_lock, flags);
+
+		lastfail = dd->f_bringup_serdes(ppd);
+		if (lastfail) {
+			qib_devinfo(dd->pcidev,
+				 "Failed to bringup IB port %u\n", ppd->port);
+			lastfail = -ENETDOWN;
+			continue;
+		}
+
+		portok++;
+	}
+
+	if (!portok) {
+		/* none of the ports initialized */
+		if (!ret && lastfail)
+			ret = lastfail;
+		else if (!ret)
+			ret = -ENETDOWN;
+		/* but continue on, so we can debug cause */
+	}
+
+	enable_chip(dd);
+
+	init_piobuf_state(dd);
+
+done:
+	if (!ret) {
+		/* chip is OK for user apps; mark it as initialized */
+		for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+			ppd = dd->pport + pidx;
+			/*
+			 * Set status even if port serdes is not initialized
+			 * so that diags will work.
+			 */
+			*ppd->statusp |= QIB_STATUS_CHIP_PRESENT |
+				QIB_STATUS_INITTED;
+			if (!ppd->link_speed_enabled)
+				continue;
+			if (dd->flags & QIB_HAS_SEND_DMA)
+				ret = qib_setup_sdma(ppd);
+			timer_setup(&ppd->hol_timer, qib_hol_event, 0);
+			ppd->hol_state = QIB_HOL_UP;
+		}
+
+		/* now we can enable all interrupts from the chip */
+		dd->f_set_intr_state(dd, 1);
+
+		/*
+		 * Setup to verify we get an interrupt, and fallback
+		 * to an alternate if necessary and possible.
+		 */
+		mod_timer(&dd->intrchk_timer, jiffies + HZ/2);
+		/* start stats retrieval timer */
+		mod_timer(&dd->stats_timer, jiffies + HZ * ACTIVITY_TIMER);
+	}
+
+	/* if ret is non-zero, we probably should do some cleanup here... */
+	return ret;
+}
+
+/*
+ * These next two routines are placeholders in case we don't have per-arch
+ * code for controlling write combining.  If explicit control of write
+ * combining is not available, performance will probably be awful.
+ */
+
+int __attribute__((weak)) qib_enable_wc(struct qib_devdata *dd)
+{
+	return -EOPNOTSUPP;
+}
+
+void __attribute__((weak)) qib_disable_wc(struct qib_devdata *dd)
+{
+}
+
+struct qib_devdata *qib_lookup(int unit)
+{
+	return xa_load(&qib_dev_table, unit);
+}
+
+/*
+ * Stop the timers during unit shutdown, or after an error late
+ * in initialization.
+ */
+static void qib_stop_timers(struct qib_devdata *dd)
+{
+	struct qib_pportdata *ppd;
+	int pidx;
+
+	if (dd->stats_timer.function)
+		del_timer_sync(&dd->stats_timer);
+	if (dd->intrchk_timer.function)
+		del_timer_sync(&dd->intrchk_timer);
+	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+		ppd = dd->pport + pidx;
+		if (ppd->hol_timer.function)
+			del_timer_sync(&ppd->hol_timer);
+		if (ppd->led_override_timer.function) {
+			del_timer_sync(&ppd->led_override_timer);
+			atomic_set(&ppd->led_override_timer_active, 0);
+		}
+		if (ppd->symerr_clear_timer.function)
+			del_timer_sync(&ppd->symerr_clear_timer);
+	}
+}
+
+/**
+ * qib_shutdown_device - shut down a device
+ * @dd: the qlogic_ib device
+ *
+ * This is called to make the device quiet when we are about to
+ * unload the driver, and also when the device is administratively
+ * disabled.   It does not free any data structures.
+ * Everything it does has to be setup again by qib_init(dd, 1)
+ */
+static void qib_shutdown_device(struct qib_devdata *dd)
+{
+	struct qib_pportdata *ppd;
+	unsigned pidx;
+
+	if (dd->flags & QIB_SHUTDOWN)
+		return;
+	dd->flags |= QIB_SHUTDOWN;
+
+	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+		ppd = dd->pport + pidx;
+
+		spin_lock_irq(&ppd->lflags_lock);
+		ppd->lflags &= ~(QIBL_LINKDOWN | QIBL_LINKINIT |
+				 QIBL_LINKARMED | QIBL_LINKACTIVE |
+				 QIBL_LINKV);
+		spin_unlock_irq(&ppd->lflags_lock);
+		*ppd->statusp &= ~(QIB_STATUS_IB_CONF | QIB_STATUS_IB_READY);
+	}
+	dd->flags &= ~QIB_INITTED;
+
+	/* mask interrupts, but not errors */
+	dd->f_set_intr_state(dd, 0);
+
+	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+		ppd = dd->pport + pidx;
+		dd->f_rcvctrl(ppd, QIB_RCVCTRL_TAILUPD_DIS |
+				   QIB_RCVCTRL_CTXT_DIS |
+				   QIB_RCVCTRL_INTRAVAIL_DIS |
+				   QIB_RCVCTRL_PKEY_ENB, -1);
+		/*
+		 * Gracefully stop all sends allowing any in progress to
+		 * trickle out first.
+		 */
+		dd->f_sendctrl(ppd, QIB_SENDCTRL_CLEAR);
+	}
+
+	/*
+	 * Enough for anything that's going to trickle out to have actually
+	 * done so.
+	 */
+	udelay(20);
+
+	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+		ppd = dd->pport + pidx;
+		dd->f_setextled(ppd, 0); /* make sure LEDs are off */
+
+		if (dd->flags & QIB_HAS_SEND_DMA)
+			qib_teardown_sdma(ppd);
+
+		dd->f_sendctrl(ppd, QIB_SENDCTRL_AVAIL_DIS |
+				    QIB_SENDCTRL_SEND_DIS);
+		/*
+		 * Clear SerdesEnable.
+		 * We can't count on interrupts since we are stopping.
+		 */
+		dd->f_quiet_serdes(ppd);
+
+		if (ppd->qib_wq) {
+			destroy_workqueue(ppd->qib_wq);
+			ppd->qib_wq = NULL;
+		}
+		qib_free_pportdata(ppd);
+	}
+
+}
+
+/**
+ * qib_free_ctxtdata - free a context's allocated data
+ * @dd: the qlogic_ib device
+ * @rcd: the ctxtdata structure
+ *
+ * free up any allocated data for a context
+ * This should not touch anything that would affect a simultaneous
+ * re-allocation of context data, because it is called after qib_mutex
+ * is released (and can be called from reinit as well).
+ * It should never change any chip state, or global driver state.
+ */
+void qib_free_ctxtdata(struct qib_devdata *dd, struct qib_ctxtdata *rcd)
+{
+	if (!rcd)
+		return;
+
+	if (rcd->rcvhdrq) {
+		dma_free_coherent(&dd->pcidev->dev, rcd->rcvhdrq_size,
+				  rcd->rcvhdrq, rcd->rcvhdrq_phys);
+		rcd->rcvhdrq = NULL;
+		if (rcd->rcvhdrtail_kvaddr) {
+			dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+					  rcd->rcvhdrtail_kvaddr,
+					  rcd->rcvhdrqtailaddr_phys);
+			rcd->rcvhdrtail_kvaddr = NULL;
+		}
+	}
+	if (rcd->rcvegrbuf) {
+		unsigned e;
+
+		for (e = 0; e < rcd->rcvegrbuf_chunks; e++) {
+			void *base = rcd->rcvegrbuf[e];
+			size_t size = rcd->rcvegrbuf_size;
+
+			dma_free_coherent(&dd->pcidev->dev, size,
+					  base, rcd->rcvegrbuf_phys[e]);
+		}
+		kfree(rcd->rcvegrbuf);
+		rcd->rcvegrbuf = NULL;
+		kfree(rcd->rcvegrbuf_phys);
+		rcd->rcvegrbuf_phys = NULL;
+		rcd->rcvegrbuf_chunks = 0;
+	}
+
+	kfree(rcd->tid_pg_list);
+	vfree(rcd->user_event_mask);
+	vfree(rcd->subctxt_uregbase);
+	vfree(rcd->subctxt_rcvegrbuf);
+	vfree(rcd->subctxt_rcvhdr_base);
+#ifdef CONFIG_DEBUG_FS
+	kfree(rcd->opstats);
+	rcd->opstats = NULL;
+#endif
+	kfree(rcd);
+}
+
+/*
+ * Perform a PIO buffer bandwidth write test, to verify proper system
+ * configuration.  Even when all the setup calls work, occasionally
+ * BIOS or other issues can prevent write combining from working, or
+ * can cause other bandwidth problems to the chip.
+ *
+ * This test simply writes the same buffer over and over again, and
+ * measures close to the peak bandwidth to the chip (not testing
+ * data bandwidth to the wire).   On chips that use an address-based
+ * trigger to send packets to the wire, this is easy.  On chips that
+ * use a count to trigger, we want to make sure that the packet doesn't
+ * go out on the wire, or trigger flow control checks.
+ */
+static void qib_verify_pioperf(struct qib_devdata *dd)
+{
+	u32 pbnum, cnt, lcnt;
+	u32 __iomem *piobuf;
+	u32 *addr;
+	u64 msecs, emsecs;
+
+	piobuf = dd->f_getsendbuf(dd->pport, 0ULL, &pbnum);
+	if (!piobuf) {
+		qib_devinfo(dd->pcidev,
+			 "No PIObufs for checking perf, skipping\n");
+		return;
+	}
+
+	/*
+	 * Enough to give us a reasonable test, less than piobuf size, and
+	 * likely multiple of store buffer length.
+	 */
+	cnt = 1024;
+
+	addr = vmalloc(cnt);
+	if (!addr)
+		goto done;
+
+	preempt_disable();  /* we want reasonably accurate elapsed time */
+	msecs = 1 + jiffies_to_msecs(jiffies);
+	for (lcnt = 0; lcnt < 10000U; lcnt++) {
+		/* wait until we cross msec boundary */
+		if (jiffies_to_msecs(jiffies) >= msecs)
+			break;
+		udelay(1);
+	}
+
+	dd->f_set_armlaunch(dd, 0);
+
+	/*
+	 * length 0, no dwords actually sent
+	 */
+	writeq(0, piobuf);
+	qib_flush_wc();
+
+	/*
+	 * This is only roughly accurate, since even with preempt we
+	 * still take interrupts that could take a while.   Running for
+	 * >= 5 msec seems to get us "close enough" to accurate values.
+	 */
+	msecs = jiffies_to_msecs(jiffies);
+	for (emsecs = lcnt = 0; emsecs <= 5UL; lcnt++) {
+		qib_pio_copy(piobuf + 64, addr, cnt >> 2);
+		emsecs = jiffies_to_msecs(jiffies) - msecs;
+	}
+
+	/* 1 GiB/sec, slightly over IB SDR line rate */
+	if (lcnt < (emsecs * 1024U))
+		qib_dev_err(dd,
+			    "Performance problem: bandwidth to PIO buffers is only %u MiB/sec\n",
+			    lcnt / (u32) emsecs);
+
+	preempt_enable();
+
+	vfree(addr);
+
+done:
+	/* disarm piobuf, so it's available again */
+	dd->f_sendctrl(dd->pport, QIB_SENDCTRL_DISARM_BUF(pbnum));
+	qib_sendbuf_done(dd, pbnum);
+	dd->f_set_armlaunch(dd, 1);
+}
+
+void qib_free_devdata(struct qib_devdata *dd)
+{
+	unsigned long flags;
+
+	xa_lock_irqsave(&qib_dev_table, flags);
+	__xa_erase(&qib_dev_table, dd->unit);
+	xa_unlock_irqrestore(&qib_dev_table, flags);
+
+#ifdef CONFIG_DEBUG_FS
+	qib_dbg_ibdev_exit(&dd->verbs_dev);
+#endif
+	free_percpu(dd->int_counter);
+	rvt_dealloc_device(&dd->verbs_dev.rdi);
+}
+
+u64 qib_int_counter(struct qib_devdata *dd)
+{
+	int cpu;
+	u64 int_counter = 0;
+
+	for_each_possible_cpu(cpu)
+		int_counter += *per_cpu_ptr(dd->int_counter, cpu);
+	return int_counter;
+}
+
+u64 qib_sps_ints(void)
+{
+	unsigned long index, flags;
+	struct qib_devdata *dd;
+	u64 sps_ints = 0;
+
+	xa_lock_irqsave(&qib_dev_table, flags);
+	xa_for_each(&qib_dev_table, index, dd) {
+		sps_ints += qib_int_counter(dd);
+	}
+	xa_unlock_irqrestore(&qib_dev_table, flags);
+	return sps_ints;
+}
+
+/*
+ * Allocate our primary per-unit data structure.  Must be done via verbs
+ * allocator, because the verbs cleanup process both does cleanup and
+ * free of the data structure.
+ * "extra" is for chip-specific data.
+ */
+struct qib_devdata *qib_alloc_devdata(struct pci_dev *pdev, size_t extra)
+{
+	struct qib_devdata *dd;
+	int ret, nports;
+
+	/* extra is * number of ports */
+	nports = extra / sizeof(struct qib_pportdata);
+	dd = (struct qib_devdata *)rvt_alloc_device(sizeof(*dd) + extra,
+						    nports);
+	if (!dd)
+		return ERR_PTR(-ENOMEM);
+
+	ret = xa_alloc_irq(&qib_dev_table, &dd->unit, dd, xa_limit_32b,
+			GFP_KERNEL);
+	if (ret < 0) {
+		qib_early_err(&pdev->dev,
+			      "Could not allocate unit ID: error %d\n", -ret);
+		goto bail;
+	}
+	rvt_set_ibdev_name(&dd->verbs_dev.rdi, "%s%d", "qib", dd->unit);
+
+	dd->int_counter = alloc_percpu(u64);
+	if (!dd->int_counter) {
+		ret = -ENOMEM;
+		qib_early_err(&pdev->dev,
+			      "Could not allocate per-cpu int_counter\n");
+		goto bail;
+	}
+
+	if (!qib_cpulist_count) {
+		u32 count = num_online_cpus();
+
+		qib_cpulist = bitmap_zalloc(count, GFP_KERNEL);
+		if (qib_cpulist)
+			qib_cpulist_count = count;
+	}
+#ifdef CONFIG_DEBUG_FS
+	qib_dbg_ibdev_init(&dd->verbs_dev);
+#endif
+	return dd;
+bail:
+	if (!list_empty(&dd->list))
+		list_del_init(&dd->list);
+	rvt_dealloc_device(&dd->verbs_dev.rdi);
+	return ERR_PTR(ret);
+}
+
+/*
+ * Called from freeze mode handlers, and from PCI error
+ * reporting code.  Should be paranoid about state of
+ * system and data structures.
+ */
+void qib_disable_after_error(struct qib_devdata *dd)
+{
+	if (dd->flags & QIB_INITTED) {
+		u32 pidx;
+
+		dd->flags &= ~QIB_INITTED;
+		if (dd->pport)
+			for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+				struct qib_pportdata *ppd;
+
+				ppd = dd->pport + pidx;
+				if (dd->flags & QIB_PRESENT) {
+					qib_set_linkstate(ppd,
+						QIB_IB_LINKDOWN_DISABLE);
+					dd->f_setextled(ppd, 0);
+				}
+				*ppd->statusp &= ~QIB_STATUS_IB_READY;
+			}
+	}
+
+	/*
+	 * Mark as having had an error for driver, and also
+	 * for /sys and status word mapped to user programs.
+	 * This marks unit as not usable, until reset.
+	 */
+	if (dd->devstatusp)
+		*dd->devstatusp |= QIB_STATUS_HWERROR;
+}
+
+static void qib_remove_one(struct pci_dev *);
+static int qib_init_one(struct pci_dev *, const struct pci_device_id *);
+static void qib_shutdown_one(struct pci_dev *);
+
+#define DRIVER_LOAD_MSG "Intel " QIB_DRV_NAME " loaded: "
+#define PFX QIB_DRV_NAME ": "
+
+static const struct pci_device_id qib_pci_tbl[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_PATHSCALE, PCI_DEVICE_ID_QLOGIC_IB_6120) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_IB_7220) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_IB_7322) },
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, qib_pci_tbl);
+
+static struct pci_driver qib_driver = {
+	.name = QIB_DRV_NAME,
+	.probe = qib_init_one,
+	.remove = qib_remove_one,
+	.shutdown = qib_shutdown_one,
+	.id_table = qib_pci_tbl,
+	.err_handler = &qib_pci_err_handler,
+};
+
+#ifdef CONFIG_INFINIBAND_QIB_DCA
+
+static int qib_notify_dca(struct notifier_block *, unsigned long, void *);
+static struct notifier_block dca_notifier = {
+	.notifier_call  = qib_notify_dca,
+	.next           = NULL,
+	.priority       = 0
+};
+
+static int qib_notify_dca_device(struct device *device, void *data)
+{
+	struct qib_devdata *dd = dev_get_drvdata(device);
+	unsigned long event = *(unsigned long *)data;
+
+	return dd->f_notify_dca(dd, event);
+}
+
+static int qib_notify_dca(struct notifier_block *nb, unsigned long event,
+					  void *p)
+{
+	int rval;
+
+	rval = driver_for_each_device(&qib_driver.driver, NULL,
+				      &event, qib_notify_dca_device);
+	return rval ? NOTIFY_BAD : NOTIFY_DONE;
+}
+
+#endif
+
+/*
+ * Do all the generic driver unit- and chip-independent memory
+ * allocation and initialization.
+ */
+static int __init qib_ib_init(void)
+{
+	int ret;
+
+	ret = qib_dev_init();
+	if (ret)
+		goto bail;
+
+	/*
+	 * These must be called before the driver is registered with
+	 * the PCI subsystem.
+	 */
+#ifdef CONFIG_INFINIBAND_QIB_DCA
+	dca_register_notify(&dca_notifier);
+#endif
+#ifdef CONFIG_DEBUG_FS
+	qib_dbg_init();
+#endif
+	ret = pci_register_driver(&qib_driver);
+	if (ret < 0) {
+		pr_err("Unable to register driver: error %d\n", -ret);
+		goto bail_dev;
+	}
+
+	/* not fatal if it doesn't work */
+	if (qib_init_qibfs())
+		pr_err("Unable to register ipathfs\n");
+	goto bail; /* all OK */
+
+bail_dev:
+#ifdef CONFIG_INFINIBAND_QIB_DCA
+	dca_unregister_notify(&dca_notifier);
+#endif
+#ifdef CONFIG_DEBUG_FS
+	qib_dbg_exit();
+#endif
+	qib_dev_cleanup();
+bail:
+	return ret;
+}
+
+module_init(qib_ib_init);
+
+/*
+ * Do the non-unit driver cleanup, memory free, etc. at unload.
+ */
+static void __exit qib_ib_cleanup(void)
+{
+	int ret;
+
+	ret = qib_exit_qibfs();
+	if (ret)
+		pr_err(
+			"Unable to cleanup counter filesystem: error %d\n",
+			-ret);
+
+#ifdef CONFIG_INFINIBAND_QIB_DCA
+	dca_unregister_notify(&dca_notifier);
+#endif
+	pci_unregister_driver(&qib_driver);
+#ifdef CONFIG_DEBUG_FS
+	qib_dbg_exit();
+#endif
+
+	qib_cpulist_count = 0;
+	bitmap_free(qib_cpulist);
+
+	WARN_ON(!xa_empty(&qib_dev_table));
+	qib_dev_cleanup();
+}
+
+module_exit(qib_ib_cleanup);
+
+/* this can only be called after a successful initialization */
+static void cleanup_device_data(struct qib_devdata *dd)
+{
+	int ctxt;
+	int pidx;
+	struct qib_ctxtdata **tmp;
+	unsigned long flags;
+
+	/* users can't do anything more with chip */
+	for (pidx = 0; pidx < dd->num_pports; ++pidx) {
+		if (dd->pport[pidx].statusp)
+			*dd->pport[pidx].statusp &= ~QIB_STATUS_CHIP_PRESENT;
+
+		spin_lock(&dd->pport[pidx].cc_shadow_lock);
+
+		kfree(dd->pport[pidx].congestion_entries);
+		dd->pport[pidx].congestion_entries = NULL;
+		kfree(dd->pport[pidx].ccti_entries);
+		dd->pport[pidx].ccti_entries = NULL;
+		kfree(dd->pport[pidx].ccti_entries_shadow);
+		dd->pport[pidx].ccti_entries_shadow = NULL;
+		kfree(dd->pport[pidx].congestion_entries_shadow);
+		dd->pport[pidx].congestion_entries_shadow = NULL;
+
+		spin_unlock(&dd->pport[pidx].cc_shadow_lock);
+	}
+
+	qib_disable_wc(dd);
+
+	if (dd->pioavailregs_dma) {
+		dma_free_coherent(&dd->pcidev->dev, PAGE_SIZE,
+				  (void *) dd->pioavailregs_dma,
+				  dd->pioavailregs_phys);
+		dd->pioavailregs_dma = NULL;
+	}
+
+	if (dd->pageshadow) {
+		struct page **tmpp = dd->pageshadow;
+		dma_addr_t *tmpd = dd->physshadow;
+		int i;
+
+		for (ctxt = 0; ctxt < dd->cfgctxts; ctxt++) {
+			int ctxt_tidbase = ctxt * dd->rcvtidcnt;
+			int maxtid = ctxt_tidbase + dd->rcvtidcnt;
+
+			for (i = ctxt_tidbase; i < maxtid; i++) {
+				if (!tmpp[i])
+					continue;
+				dma_unmap_page(&dd->pcidev->dev, tmpd[i],
+					       PAGE_SIZE, DMA_FROM_DEVICE);
+				qib_release_user_pages(&tmpp[i], 1);
+				tmpp[i] = NULL;
+			}
+		}
+
+		dd->pageshadow = NULL;
+		vfree(tmpp);
+		dd->physshadow = NULL;
+		vfree(tmpd);
+	}
+
+	/*
+	 * Free any resources still in use (usually just kernel contexts)
+	 * at unload; we do for ctxtcnt, because that's what we allocate.
+	 * We acquire lock to be really paranoid that rcd isn't being
+	 * accessed from some interrupt-related code (that should not happen,
+	 * but best to be sure).
+	 */
+	spin_lock_irqsave(&dd->uctxt_lock, flags);
+	tmp = dd->rcd;
+	dd->rcd = NULL;
+	spin_unlock_irqrestore(&dd->uctxt_lock, flags);
+	for (ctxt = 0; tmp && ctxt < dd->ctxtcnt; ctxt++) {
+		struct qib_ctxtdata *rcd = tmp[ctxt];
+
+		tmp[ctxt] = NULL; /* debugging paranoia */
+		qib_free_ctxtdata(dd, rcd);
+	}
+	kfree(tmp);
+}
+
+/*
+ * Clean up on unit shutdown, or error during unit load after
+ * successful initialization.
+ */
+static void qib_postinit_cleanup(struct qib_devdata *dd)
+{
+	/*
+	 * Clean up chip-specific stuff.
+	 * We check for NULL here, because it's outside
+	 * the kregbase check, and we need to call it
+	 * after the free_irq.  Thus it's possible that
+	 * the function pointers were never initialized.
+	 */
+	if (dd->f_cleanup)
+		dd->f_cleanup(dd);
+
+	qib_pcie_ddcleanup(dd);
+
+	cleanup_device_data(dd);
+
+	qib_free_devdata(dd);
+}
+
+static int qib_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+	int ret, j, pidx, initfail;
+	struct qib_devdata *dd = NULL;
+
+	ret = qib_pcie_init(pdev, ent);
+	if (ret)
+		goto bail;
+
+	/*
+	 * Do device-specific initialiation, function table setup, dd
+	 * allocation, etc.
+	 */
+	switch (ent->device) {
+	case PCI_DEVICE_ID_QLOGIC_IB_6120:
+#ifdef CONFIG_PCI_MSI
+		dd = qib_init_iba6120_funcs(pdev, ent);
+#else
+		qib_early_err(&pdev->dev,
+			"Intel PCIE device 0x%x cannot work if CONFIG_PCI_MSI is not enabled\n",
+			ent->device);
+		dd = ERR_PTR(-ENODEV);
+#endif
+		break;
+
+	case PCI_DEVICE_ID_QLOGIC_IB_7220:
+		dd = qib_init_iba7220_funcs(pdev, ent);
+		break;
+
+	case PCI_DEVICE_ID_QLOGIC_IB_7322:
+		dd = qib_init_iba7322_funcs(pdev, ent);
+		break;
+
+	default:
+		qib_early_err(&pdev->dev,
+			"Failing on unknown Intel deviceid 0x%x\n",
+			ent->device);
+		ret = -ENODEV;
+	}
+
+	if (IS_ERR(dd))
+		ret = PTR_ERR(dd);
+	if (ret)
+		goto bail; /* error already printed */
+
+	ret = qib_create_workqueues(dd);
+	if (ret)
+		goto bail;
+
+	/* do the generic initialization */
+	initfail = qib_init(dd, 0);
+
+	ret = qib_register_ib_device(dd);
+
+	/*
+	 * Now ready for use.  this should be cleared whenever we
+	 * detect a reset, or initiate one.  If earlier failure,
+	 * we still create devices, so diags, etc. can be used
+	 * to determine cause of problem.
+	 */
+	if (!qib_mini_init && !initfail && !ret)
+		dd->flags |= QIB_INITTED;
+
+	j = qib_device_create(dd);
+	if (j)
+		qib_dev_err(dd, "Failed to create /dev devices: %d\n", -j);
+	j = qibfs_add(dd);
+	if (j)
+		qib_dev_err(dd, "Failed filesystem setup for counters: %d\n",
+			    -j);
+
+	if (qib_mini_init || initfail || ret) {
+		qib_stop_timers(dd);
+		flush_workqueue(ib_wq);
+		for (pidx = 0; pidx < dd->num_pports; ++pidx)
+			dd->f_quiet_serdes(dd->pport + pidx);
+		if (qib_mini_init)
+			goto bail;
+		if (!j) {
+			(void) qibfs_remove(dd);
+			qib_device_remove(dd);
+		}
+		if (!ret)
+			qib_unregister_ib_device(dd);
+		qib_postinit_cleanup(dd);
+		if (initfail)
+			ret = initfail;
+		goto bail;
+	}
+
+	ret = qib_enable_wc(dd);
+	if (ret) {
+		qib_dev_err(dd,
+			"Write combining not enabled (err %d): performance may be poor\n",
+			-ret);
+		ret = 0;
+	}
+
+	qib_verify_pioperf(dd);
+bail:
+	return ret;
+}
+
+static void qib_remove_one(struct pci_dev *pdev)
+{
+	struct qib_devdata *dd = pci_get_drvdata(pdev);
+	int ret;
+
+	/* unregister from IB core */
+	qib_unregister_ib_device(dd);
+
+	/*
+	 * Disable the IB link, disable interrupts on the device,
+	 * clear dma engines, etc.
+	 */
+	if (!qib_mini_init)
+		qib_shutdown_device(dd);
+
+	qib_stop_timers(dd);
+
+	/* wait until all of our (qsfp) queue_work() calls complete */
+	flush_workqueue(ib_wq);
+
+	ret = qibfs_remove(dd);
+	if (ret)
+		qib_dev_err(dd, "Failed counters filesystem cleanup: %d\n",
+			    -ret);
+
+	qib_device_remove(dd);
+
+	qib_postinit_cleanup(dd);
+}
+
+static void qib_shutdown_one(struct pci_dev *pdev)
+{
+	struct qib_devdata *dd = pci_get_drvdata(pdev);
+
+	qib_shutdown_device(dd);
+}
+
+/**
+ * qib_create_rcvhdrq - create a receive header queue
+ * @dd: the qlogic_ib device
+ * @rcd: the context data
+ *
+ * This must be contiguous memory (from an i/o perspective), and must be
+ * DMA'able (which means for some systems, it will go through an IOMMU,
+ * or be forced into a low address range).
+ */
+int qib_create_rcvhdrq(struct qib_devdata *dd, struct qib_ctxtdata *rcd)
+{
+	unsigned amt;
+	int old_node_id;
+
+	if (!rcd->rcvhdrq) {
+		dma_addr_t phys_hdrqtail;
+		gfp_t gfp_flags;
+
+		amt = ALIGN(dd->rcvhdrcnt * dd->rcvhdrentsize *
+			    sizeof(u32), PAGE_SIZE);
+		gfp_flags = (rcd->ctxt >= dd->first_user_ctxt) ?
+			GFP_USER : GFP_KERNEL;
+
+		old_node_id = dev_to_node(&dd->pcidev->dev);
+		set_dev_node(&dd->pcidev->dev, rcd->node_id);
+		rcd->rcvhdrq = dma_alloc_coherent(
+			&dd->pcidev->dev, amt, &rcd->rcvhdrq_phys,
+			gfp_flags | __GFP_COMP);
+		set_dev_node(&dd->pcidev->dev, old_node_id);
+
+		if (!rcd->rcvhdrq) {
+			qib_dev_err(dd,
+				"attempt to allocate %d bytes for ctxt %u rcvhdrq failed\n",
+				amt, rcd->ctxt);
+			goto bail;
+		}
+
+		if (rcd->ctxt >= dd->first_user_ctxt) {
+			rcd->user_event_mask = vmalloc_user(PAGE_SIZE);
+			if (!rcd->user_event_mask)
+				goto bail_free_hdrq;
+		}
+
+		if (!(dd->flags & QIB_NODMA_RTAIL)) {
+			set_dev_node(&dd->pcidev->dev, rcd->node_id);
+			rcd->rcvhdrtail_kvaddr = dma_alloc_coherent(
+				&dd->pcidev->dev, PAGE_SIZE, &phys_hdrqtail,
+				gfp_flags);
+			set_dev_node(&dd->pcidev->dev, old_node_id);
+			if (!rcd->rcvhdrtail_kvaddr)
+				goto bail_free;
+			rcd->rcvhdrqtailaddr_phys = phys_hdrqtail;
+		}
+
+		rcd->rcvhdrq_size = amt;
+	}
+
+	/* clear for security and sanity on each use */
+	memset(rcd->rcvhdrq, 0, rcd->rcvhdrq_size);
+	if (rcd->rcvhdrtail_kvaddr)
+		memset(rcd->rcvhdrtail_kvaddr, 0, PAGE_SIZE);
+	return 0;
+
+bail_free:
+	qib_dev_err(dd,
+		"attempt to allocate 1 page for ctxt %u rcvhdrqtailaddr failed\n",
+		rcd->ctxt);
+	vfree(rcd->user_event_mask);
+	rcd->user_event_mask = NULL;
+bail_free_hdrq:
+	dma_free_coherent(&dd->pcidev->dev, amt, rcd->rcvhdrq,
+			  rcd->rcvhdrq_phys);
+	rcd->rcvhdrq = NULL;
+bail:
+	return -ENOMEM;
+}
+
+/**
+ * qib_setup_eagerbufs - allocate eager buffers, both kernel and user contexts.
+ * @rcd: the context we are setting up.
+ *
+ * Allocate the eager TID buffers and program them into hip.
+ * They are no longer completely contiguous, we do multiple allocation
+ * calls.  Otherwise we get the OOM code involved, by asking for too
+ * much per call, with disastrous results on some kernels.
+ */
+int qib_setup_eagerbufs(struct qib_ctxtdata *rcd)
+{
+	struct qib_devdata *dd = rcd->dd;
+	unsigned e, egrcnt, egrperchunk, chunk, egrsize, egroff;
+	size_t size;
+	gfp_t gfp_flags;
+	int old_node_id;
+
+	/*
+	 * GFP_USER, but without GFP_FS, so buffer cache can be
+	 * coalesced (we hope); otherwise, even at order 4,
+	 * heavy filesystem activity makes these fail, and we can
+	 * use compound pages.
+	 */
+	gfp_flags = __GFP_RECLAIM | __GFP_IO | __GFP_COMP;
+
+	egrcnt = rcd->rcvegrcnt;
+	egroff = rcd->rcvegr_tid_base;
+	egrsize = dd->rcvegrbufsize;
+
+	chunk = rcd->rcvegrbuf_chunks;
+	egrperchunk = rcd->rcvegrbufs_perchunk;
+	size = rcd->rcvegrbuf_size;
+	if (!rcd->rcvegrbuf) {
+		rcd->rcvegrbuf =
+			kcalloc_node(chunk, sizeof(rcd->rcvegrbuf[0]),
+				     GFP_KERNEL, rcd->node_id);
+		if (!rcd->rcvegrbuf)
+			goto bail;
+	}
+	if (!rcd->rcvegrbuf_phys) {
+		rcd->rcvegrbuf_phys =
+			kmalloc_array_node(chunk,
+					   sizeof(rcd->rcvegrbuf_phys[0]),
+					   GFP_KERNEL, rcd->node_id);
+		if (!rcd->rcvegrbuf_phys)
+			goto bail_rcvegrbuf;
+	}
+	for (e = 0; e < rcd->rcvegrbuf_chunks; e++) {
+		if (rcd->rcvegrbuf[e])
+			continue;
+
+		old_node_id = dev_to_node(&dd->pcidev->dev);
+		set_dev_node(&dd->pcidev->dev, rcd->node_id);
+		rcd->rcvegrbuf[e] =
+			dma_alloc_coherent(&dd->pcidev->dev, size,
+					   &rcd->rcvegrbuf_phys[e],
+					   gfp_flags);
+		set_dev_node(&dd->pcidev->dev, old_node_id);
+		if (!rcd->rcvegrbuf[e])
+			goto bail_rcvegrbuf_phys;
+	}
+
+	rcd->rcvegr_phys = rcd->rcvegrbuf_phys[0];
+
+	for (e = chunk = 0; chunk < rcd->rcvegrbuf_chunks; chunk++) {
+		dma_addr_t pa = rcd->rcvegrbuf_phys[chunk];
+		unsigned i;
+
+		/* clear for security and sanity on each use */
+		memset(rcd->rcvegrbuf[chunk], 0, size);
+
+		for (i = 0; e < egrcnt && i < egrperchunk; e++, i++) {
+			dd->f_put_tid(dd, e + egroff +
+					  (u64 __iomem *)
+					  ((char __iomem *)
+					   dd->kregbase +
+					   dd->rcvegrbase),
+					  RCVHQ_RCV_TYPE_EAGER, pa);
+			pa += egrsize;
+		}
+		cond_resched(); /* don't hog the cpu */
+	}
+
+	return 0;
+
+bail_rcvegrbuf_phys:
+	for (e = 0; e < rcd->rcvegrbuf_chunks && rcd->rcvegrbuf[e]; e++)
+		dma_free_coherent(&dd->pcidev->dev, size,
+				  rcd->rcvegrbuf[e], rcd->rcvegrbuf_phys[e]);
+	kfree(rcd->rcvegrbuf_phys);
+	rcd->rcvegrbuf_phys = NULL;
+bail_rcvegrbuf:
+	kfree(rcd->rcvegrbuf);
+	rcd->rcvegrbuf = NULL;
+bail:
+	return -ENOMEM;
+}
+
+/*
+ * Note: Changes to this routine should be mirrored
+ * for the diagnostics routine qib_remap_ioaddr32().
+ * There is also related code for VL15 buffers in qib_init_7322_variables().
+ * The teardown code that unmaps is in qib_pcie_ddcleanup()
+ */
+int init_chip_wc_pat(struct qib_devdata *dd, u32 vl15buflen)
+{
+	u64 __iomem *qib_kregbase = NULL;
+	void __iomem *qib_piobase = NULL;
+	u64 __iomem *qib_userbase = NULL;
+	u64 qib_kreglen;
+	u64 qib_pio2koffset = dd->piobufbase & 0xffffffff;
+	u64 qib_pio4koffset = dd->piobufbase >> 32;
+	u64 qib_pio2klen = dd->piobcnt2k * dd->palign;
+	u64 qib_pio4klen = dd->piobcnt4k * dd->align4k;
+	u64 qib_physaddr = dd->physaddr;
+	u64 qib_piolen;
+	u64 qib_userlen = 0;
+
+	/*
+	 * Free the old mapping because the kernel will try to reuse the
+	 * old mapping and not create a new mapping with the
+	 * write combining attribute.
+	 */
+	iounmap(dd->kregbase);
+	dd->kregbase = NULL;
+
+	/*
+	 * Assumes chip address space looks like:
+	 *	- kregs + sregs + cregs + uregs (in any order)
+	 *	- piobufs (2K and 4K bufs in either order)
+	 * or:
+	 *	- kregs + sregs + cregs (in any order)
+	 *	- piobufs (2K and 4K bufs in either order)
+	 *	- uregs
+	 */
+	if (dd->piobcnt4k == 0) {
+		qib_kreglen = qib_pio2koffset;
+		qib_piolen = qib_pio2klen;
+	} else if (qib_pio2koffset < qib_pio4koffset) {
+		qib_kreglen = qib_pio2koffset;
+		qib_piolen = qib_pio4koffset + qib_pio4klen - qib_kreglen;
+	} else {
+		qib_kreglen = qib_pio4koffset;
+		qib_piolen = qib_pio2koffset + qib_pio2klen - qib_kreglen;
+	}
+	qib_piolen += vl15buflen;
+	/* Map just the configured ports (not all hw ports) */
+	if (dd->uregbase > qib_kreglen)
+		qib_userlen = dd->ureg_align * dd->cfgctxts;
+
+	/* Sanity checks passed, now create the new mappings */
+	qib_kregbase = ioremap(qib_physaddr, qib_kreglen);
+	if (!qib_kregbase)
+		goto bail;
+
+	qib_piobase = ioremap_wc(qib_physaddr + qib_kreglen, qib_piolen);
+	if (!qib_piobase)
+		goto bail_kregbase;
+
+	if (qib_userlen) {
+		qib_userbase = ioremap(qib_physaddr + dd->uregbase,
+					       qib_userlen);
+		if (!qib_userbase)
+			goto bail_piobase;
+	}
+
+	dd->kregbase = qib_kregbase;
+	dd->kregend = (u64 __iomem *)
+		((char __iomem *) qib_kregbase + qib_kreglen);
+	dd->piobase = qib_piobase;
+	dd->pio2kbase = (void __iomem *)
+		(((char __iomem *) dd->piobase) +
+		 qib_pio2koffset - qib_kreglen);
+	if (dd->piobcnt4k)
+		dd->pio4kbase = (void __iomem *)
+			(((char __iomem *) dd->piobase) +
+			 qib_pio4koffset - qib_kreglen);
+	if (qib_userlen)
+		/* ureg will now be accessed relative to dd->userbase */
+		dd->userbase = qib_userbase;
+	return 0;
+
+bail_piobase:
+	iounmap(qib_piobase);
+bail_kregbase:
+	iounmap(qib_kregbase);
+bail:
+	return -ENOMEM;
+}