Adding upstream version 6.1.76.upstream/6.1.76upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 388 insertions, 0 deletions

diff --git a/drivers/input/misc/cma3000_d0x.c b/drivers/input/misc/cma3000_d0x.c
new file mode 100644
index 000000000..e6feb73bb
--- /dev/null
+++ b/drivers/input/misc/cma3000_d0x.c
@@ -0,0 +1,388 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * VTI CMA3000_D0x Accelerometer driver
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Hemanth V <hemanthv@ti.com>
+ */
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input/cma3000.h>
+#include <linux/module.h>
+
+#include "cma3000_d0x.h"
+
+#define CMA3000_WHOAMI      0x00
+#define CMA3000_REVID       0x01
+#define CMA3000_CTRL        0x02
+#define CMA3000_STATUS      0x03
+#define CMA3000_RSTR        0x04
+#define CMA3000_INTSTATUS   0x05
+#define CMA3000_DOUTX       0x06
+#define CMA3000_DOUTY       0x07
+#define CMA3000_DOUTZ       0x08
+#define CMA3000_MDTHR       0x09
+#define CMA3000_MDFFTMR     0x0A
+#define CMA3000_FFTHR       0x0B
+
+#define CMA3000_RANGE2G    (1 << 7)
+#define CMA3000_RANGE8G    (0 << 7)
+#define CMA3000_BUSI2C     (0 << 4)
+#define CMA3000_MODEMASK   (7 << 1)
+#define CMA3000_GRANGEMASK (1 << 7)
+
+#define CMA3000_STATUS_PERR    1
+#define CMA3000_INTSTATUS_FFDET (1 << 2)
+
+/* Settling time delay in ms */
+#define CMA3000_SETDELAY    30
+
+/* Delay for clearing interrupt in us */
+#define CMA3000_INTDELAY    44
+
+
+/*
+ * Bit weights in mg for bit 0, other bits need
+ * multiply factor 2^n. Eight bit is the sign bit.
+ */
+#define BIT_TO_2G  18
+#define BIT_TO_8G  71
+
+struct cma3000_accl_data {
+	const struct cma3000_bus_ops *bus_ops;
+	const struct cma3000_platform_data *pdata;
+
+	struct device *dev;
+	struct input_dev *input_dev;
+
+	int bit_to_mg;
+	int irq;
+
+	int g_range;
+	u8 mode;
+
+	struct mutex mutex;
+	bool opened;
+	bool suspended;
+};
+
+#define CMA3000_READ(data, reg, msg) \
+	(data->bus_ops->read(data->dev, reg, msg))
+#define CMA3000_SET(data, reg, val, msg) \
+	((data)->bus_ops->write(data->dev, reg, val, msg))
+
+/*
+ * Conversion for each of the eight modes to g, depending
+ * on G range i.e 2G or 8G. Some modes always operate in
+ * 8G.
+ */
+
+static int mode_to_mg[8][2] = {
+	{ 0, 0 },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ BIT_TO_8G, BIT_TO_8G },
+	{ BIT_TO_8G, BIT_TO_8G },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ BIT_TO_8G, BIT_TO_2G },
+	{ 0, 0},
+};
+
+static void decode_mg(struct cma3000_accl_data *data, int *datax,
+				int *datay, int *dataz)
+{
+	/* Data in 2's complement, convert to mg */
+	*datax = ((s8)*datax) * data->bit_to_mg;
+	*datay = ((s8)*datay) * data->bit_to_mg;
+	*dataz = ((s8)*dataz) * data->bit_to_mg;
+}
+
+static irqreturn_t cma3000_thread_irq(int irq, void *dev_id)
+{
+	struct cma3000_accl_data *data = dev_id;
+	int datax, datay, dataz, intr_status;
+	u8 ctrl, mode, range;
+
+	intr_status = CMA3000_READ(data, CMA3000_INTSTATUS, "interrupt status");
+	if (intr_status < 0)
+		return IRQ_NONE;
+
+	/* Check if free fall is detected, report immediately */
+	if (intr_status & CMA3000_INTSTATUS_FFDET) {
+		input_report_abs(data->input_dev, ABS_MISC, 1);
+		input_sync(data->input_dev);
+	} else {
+		input_report_abs(data->input_dev, ABS_MISC, 0);
+	}
+
+	datax = CMA3000_READ(data, CMA3000_DOUTX, "X");
+	datay = CMA3000_READ(data, CMA3000_DOUTY, "Y");
+	dataz = CMA3000_READ(data, CMA3000_DOUTZ, "Z");
+
+	ctrl = CMA3000_READ(data, CMA3000_CTRL, "ctrl");
+	mode = (ctrl & CMA3000_MODEMASK) >> 1;
+	range = (ctrl & CMA3000_GRANGEMASK) >> 7;
+
+	data->bit_to_mg = mode_to_mg[mode][range];
+
+	/* Interrupt not for this device */
+	if (data->bit_to_mg == 0)
+		return IRQ_NONE;
+
+	/* Decode register values to milli g */
+	decode_mg(data, &datax, &datay, &dataz);
+
+	input_report_abs(data->input_dev, ABS_X, datax);
+	input_report_abs(data->input_dev, ABS_Y, datay);
+	input_report_abs(data->input_dev, ABS_Z, dataz);
+	input_sync(data->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int cma3000_reset(struct cma3000_accl_data *data)
+{
+	int val;
+
+	/* Reset sequence */
+	CMA3000_SET(data, CMA3000_RSTR, 0x02, "Reset");
+	CMA3000_SET(data, CMA3000_RSTR, 0x0A, "Reset");
+	CMA3000_SET(data, CMA3000_RSTR, 0x04, "Reset");
+
+	/* Settling time delay */
+	mdelay(10);
+
+	val = CMA3000_READ(data, CMA3000_STATUS, "Status");
+	if (val < 0) {
+		dev_err(data->dev, "Reset failed\n");
+		return val;
+	}
+
+	if (val & CMA3000_STATUS_PERR) {
+		dev_err(data->dev, "Parity Error\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cma3000_poweron(struct cma3000_accl_data *data)
+{
+	const struct cma3000_platform_data *pdata = data->pdata;
+	u8 ctrl = 0;
+	int ret;
+
+	if (data->g_range == CMARANGE_2G) {
+		ctrl = (data->mode << 1) | CMA3000_RANGE2G;
+	} else if (data->g_range == CMARANGE_8G) {
+		ctrl = (data->mode << 1) | CMA3000_RANGE8G;
+	} else {
+		dev_info(data->dev,
+			 "Invalid G range specified, assuming 8G\n");
+		ctrl = (data->mode << 1) | CMA3000_RANGE8G;
+	}
+
+	ctrl |= data->bus_ops->ctrl_mod;
+
+	CMA3000_SET(data, CMA3000_MDTHR, pdata->mdthr,
+		    "Motion Detect Threshold");
+	CMA3000_SET(data, CMA3000_MDFFTMR, pdata->mdfftmr,
+		    "Time register");
+	CMA3000_SET(data, CMA3000_FFTHR, pdata->ffthr,
+		    "Free fall threshold");
+	ret = CMA3000_SET(data, CMA3000_CTRL, ctrl, "Mode setting");
+	if (ret < 0)
+		return -EIO;
+
+	msleep(CMA3000_SETDELAY);
+
+	return 0;
+}
+
+static int cma3000_poweroff(struct cma3000_accl_data *data)
+{
+	int ret;
+
+	ret = CMA3000_SET(data, CMA3000_CTRL, CMAMODE_POFF, "Mode setting");
+	msleep(CMA3000_SETDELAY);
+
+	return ret;
+}
+
+static int cma3000_open(struct input_dev *input_dev)
+{
+	struct cma3000_accl_data *data = input_get_drvdata(input_dev);
+
+	mutex_lock(&data->mutex);
+
+	if (!data->suspended)
+		cma3000_poweron(data);
+
+	data->opened = true;
+
+	mutex_unlock(&data->mutex);
+
+	return 0;
+}
+
+static void cma3000_close(struct input_dev *input_dev)
+{
+	struct cma3000_accl_data *data = input_get_drvdata(input_dev);
+
+	mutex_lock(&data->mutex);
+
+	if (!data->suspended)
+		cma3000_poweroff(data);
+
+	data->opened = false;
+
+	mutex_unlock(&data->mutex);
+}
+
+void cma3000_suspend(struct cma3000_accl_data *data)
+{
+	mutex_lock(&data->mutex);
+
+	if (!data->suspended && data->opened)
+		cma3000_poweroff(data);
+
+	data->suspended = true;
+
+	mutex_unlock(&data->mutex);
+}
+EXPORT_SYMBOL(cma3000_suspend);
+
+
+void cma3000_resume(struct cma3000_accl_data *data)
+{
+	mutex_lock(&data->mutex);
+
+	if (data->suspended && data->opened)
+		cma3000_poweron(data);
+
+	data->suspended = false;
+
+	mutex_unlock(&data->mutex);
+}
+EXPORT_SYMBOL(cma3000_resume);
+
+struct cma3000_accl_data *cma3000_init(struct device *dev, int irq,
+				       const struct cma3000_bus_ops *bops)
+{
+	const struct cma3000_platform_data *pdata = dev_get_platdata(dev);
+	struct cma3000_accl_data *data;
+	struct input_dev *input_dev;
+	int rev;
+	int error;
+
+	if (!pdata) {
+		dev_err(dev, "platform data not found\n");
+		error = -EINVAL;
+		goto err_out;
+	}
+
+
+	/* if no IRQ return error */
+	if (irq == 0) {
+		error = -EINVAL;
+		goto err_out;
+	}
+
+	data = kzalloc(sizeof(struct cma3000_accl_data), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!data || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	data->dev = dev;
+	data->input_dev = input_dev;
+	data->bus_ops = bops;
+	data->pdata = pdata;
+	data->irq = irq;
+	mutex_init(&data->mutex);
+
+	data->mode = pdata->mode;
+	if (data->mode > CMAMODE_POFF) {
+		data->mode = CMAMODE_MOTDET;
+		dev_warn(dev,
+			 "Invalid mode specified, assuming Motion Detect\n");
+	}
+
+	data->g_range = pdata->g_range;
+	if (data->g_range != CMARANGE_2G && data->g_range != CMARANGE_8G) {
+		dev_info(dev,
+			 "Invalid G range specified, assuming 8G\n");
+		data->g_range = CMARANGE_8G;
+	}
+
+	input_dev->name = "cma3000-accelerometer";
+	input_dev->id.bustype = bops->bustype;
+	input_dev->open = cma3000_open;
+	input_dev->close = cma3000_close;
+
+	 __set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_X,
+			-data->g_range, data->g_range, pdata->fuzz_x, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			-data->g_range, data->g_range, pdata->fuzz_y, 0);
+	input_set_abs_params(input_dev, ABS_Z,
+			-data->g_range, data->g_range, pdata->fuzz_z, 0);
+	input_set_abs_params(input_dev, ABS_MISC, 0, 1, 0, 0);
+
+	input_set_drvdata(input_dev, data);
+
+	error = cma3000_reset(data);
+	if (error)
+		goto err_free_mem;
+
+	rev = CMA3000_READ(data, CMA3000_REVID, "Revid");
+	if (rev < 0) {
+		error = rev;
+		goto err_free_mem;
+	}
+
+	pr_info("CMA3000 Accelerometer: Revision %x\n", rev);
+
+	error = request_threaded_irq(irq, NULL, cma3000_thread_irq,
+				     pdata->irqflags | IRQF_ONESHOT,
+				     "cma3000_d0x", data);
+	if (error) {
+		dev_err(dev, "request_threaded_irq failed\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(data->input_dev);
+	if (error) {
+		dev_err(dev, "Unable to register input device\n");
+		goto err_free_irq;
+	}
+
+	return data;
+
+err_free_irq:
+	free_irq(irq, data);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(data);
+err_out:
+	return ERR_PTR(error);
+}
+EXPORT_SYMBOL(cma3000_init);
+
+void cma3000_exit(struct cma3000_accl_data *data)
+{
+	free_irq(data->irq, data);
+	input_unregister_device(data->input_dev);
+	kfree(data);
+}
+EXPORT_SYMBOL(cma3000_exit);
+
+MODULE_DESCRIPTION("CMA3000-D0x Accelerometer Driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Hemanth V <hemanthv@ti.com>");